summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRabin Vincent <rabin.vincent@stericsson.com>2010-05-19 11:39:02 +0200
committerSamuel Ortiz <sameo@linux.intel.com>2010-05-28 01:38:00 +0200
commit62579266cf9caca5b999560be2b5ceee42fc4d4d (patch)
treeeda6066624c734ef3057a9dc568ebaf978499c1a
parent75907a1153b42100b7a5e960bfe47d208d726309 (diff)
mfd: New AB8500 driver
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-rw-r--r--arch/arm/mach-ux500/board-mop500.c2
-rw-r--r--drivers/mfd/Kconfig9
-rw-r--r--drivers/mfd/Makefile2
-rw-r--r--drivers/mfd/ab4500-core.c209
-rw-r--r--drivers/mfd/ab8500-core.c444
-rw-r--r--drivers/mfd/ab8500-spi.c133
-rw-r--r--include/linux/mfd/ab4500.h262
-rw-r--r--include/linux/mfd/ab8500.h128
8 files changed, 712 insertions, 477 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 072196c57263..bb8d7b771817 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = {
static struct spi_board_info u8500_spi_devices[] = {
{
- .modalias = "ab4500",
+ .modalias = "ab8500",
.controller_data = &ab4500_chip_info,
.max_speed_hz = 12000000,
.bus_num = 0,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b84b7078e909..9da0e504bbe9 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -420,11 +420,12 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
-config AB4500_CORE
- tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
- depends on SPI
+config AB8500_CORE
+ bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
+ depends on SPI=y && GENERIC_HARDIRQS
+ select MFD_CORE
help
- Select this option to enable access to AB4500 power management
+ Select this option to enable access to AB8500 power management
chip. This connects to U8500 on the SSP/SPI bus and exports
read/write functions for the devices to get access to this chip.
This chip embeds various other multimedia funtionalities as well.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index ca1517e948af..fb503e77dc60 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -64,8 +64,8 @@ obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
-obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
obj-$(CONFIG_AB3550_CORE) += ab3550-core.o
+obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-spi.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
obj-$(CONFIG_LPC_SCH) += lpc_sch.o
diff --git a/drivers/mfd/ab4500-core.c b/drivers/mfd/ab4500-core.c
deleted file mode 100644
index c275daa3ab1a..000000000000
--- a/drivers/mfd/ab4500-core.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it
- * and/or modify it under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation.
- *
- * AB4500 is a companion power management chip used with U8500.
- * On this platform, this is interfaced with SSP0 controller
- * which is a ARM primecell pl022.
- *
- * At the moment the module just exports read/write features.
- * Interrupt management to be added - TODO.
- */
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/ab4500.h>
-
-/* just required if probe fails, we need to
- * unregister the device
- */
-static struct spi_driver ab4500_driver;
-
-/*
- * This funtion writes to any AB4500 registers using
- * SPI protocol & before it writes it packs the data
- * in the below 24 bit frame format
- *
- * *|------------------------------------|
- * *| 23|22...18|17.......10|9|8|7......0|
- * *| r/w bank adr data |
- * * ------------------------------------
- *
- * This function shouldn't be called from interrupt
- * context
- */
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr, unsigned char data)
-{
- struct spi_transfer xfer;
- struct spi_message msg;
- int err;
- unsigned long spi_data =
- block << 18 | addr << 10 | data;
-
- mutex_lock(&ab4500->lock);
- ab4500->tx_buf[0] = spi_data;
- ab4500->rx_buf[0] = 0;
-
- xfer.tx_buf = ab4500->tx_buf;
- xfer.rx_buf = NULL;
- xfer.len = sizeof(unsigned long);
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- err = spi_sync(ab4500->spi, &msg);
- mutex_unlock(&ab4500->lock);
-
- return err;
-}
-EXPORT_SYMBOL(ab4500_write);
-
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr)
-{
- struct spi_transfer xfer;
- struct spi_message msg;
- unsigned long spi_data =
- 1 << 23 | block << 18 | addr << 10;
-
- mutex_lock(&ab4500->lock);
- ab4500->tx_buf[0] = spi_data;
- ab4500->rx_buf[0] = 0;
-
- xfer.tx_buf = ab4500->tx_buf;
- xfer.rx_buf = ab4500->rx_buf;
- xfer.len = sizeof(unsigned long);
-
- spi_message_init(&msg);
- spi_message_add_tail(&xfer, &msg);
-
- spi_sync(ab4500->spi, &msg);
- mutex_unlock(&ab4500->lock);
-
- return ab4500->rx_buf[0];
-}
-EXPORT_SYMBOL(ab4500_read);
-
-/* ref: ab3100 core */
-#define AB4500_DEVICE(devname, devid) \
-static struct platform_device ab4500_##devname##_device = { \
- .name = devid, \
- .id = -1, \
-}
-
-/* list of childern devices of ab4500 - all are
- * not populated here - TODO
- */
-AB4500_DEVICE(charger, "ab4500-charger");
-AB4500_DEVICE(audio, "ab4500-audio");
-AB4500_DEVICE(usb, "ab4500-usb");
-AB4500_DEVICE(tvout, "ab4500-tvout");
-AB4500_DEVICE(sim, "ab4500-sim");
-AB4500_DEVICE(gpadc, "ab4500-gpadc");
-AB4500_DEVICE(clkmgt, "ab4500-clkmgt");
-AB4500_DEVICE(misc, "ab4500-misc");
-
-static struct platform_device *ab4500_platform_devs[] = {
- &ab4500_charger_device,
- &ab4500_audio_device,
- &ab4500_usb_device,
- &ab4500_tvout_device,
- &ab4500_sim_device,
- &ab4500_gpadc_device,
- &ab4500_clkmgt_device,
- &ab4500_misc_device,
-};
-
-static int __init ab4500_probe(struct spi_device *spi)
-{
- struct ab4500 *ab4500;
- unsigned char revision;
- int err = 0;
- int i;
-
- ab4500 = kzalloc(sizeof *ab4500, GFP_KERNEL);
- if (!ab4500) {
- dev_err(&spi->dev, "could not allocate AB4500\n");
- err = -ENOMEM;
- goto not_detect;
- }
-
- ab4500->spi = spi;
- spi_set_drvdata(spi, ab4500);
-
- mutex_init(&ab4500->lock);
-
- /* read the revision register */
- revision = ab4500_read(ab4500, AB4500_MISC, AB4500_REV_REG);
-
- /* revision id 0x0 is for early drop, 0x10 is for cut1.0 */
- if (revision == 0x0 || revision == 0x10)
- dev_info(&spi->dev, "Detected chip: %s, revision = %x\n",
- ab4500_driver.driver.name, revision);
- else {
- dev_err(&spi->dev, "unknown chip: 0x%x\n", revision);
- goto not_detect;
- }
-
- for (i = 0; i < ARRAY_SIZE(ab4500_platform_devs); i++) {
- ab4500_platform_devs[i]->dev.parent =
- &spi->dev;
- platform_set_drvdata(ab4500_platform_devs[i], ab4500);
- }
-
- /* register the ab4500 platform devices */
- platform_add_devices(ab4500_platform_devs,
- ARRAY_SIZE(ab4500_platform_devs));
-
- return err;
-
- not_detect:
- spi_unregister_driver(&ab4500_driver);
- kfree(ab4500);
- return err;
-}
-
-static int __devexit ab4500_remove(struct spi_device *spi)
-{
- struct ab4500 *ab4500 =
- spi_get_drvdata(spi);
-
- kfree(ab4500);
-
- return 0;
-}
-
-static struct spi_driver ab4500_driver = {
- .driver = {
- .name = "ab4500",
- .owner = THIS_MODULE,
- },
- .probe = ab4500_probe,
- .remove = __devexit_p(ab4500_remove)
-};
-
-static int __devinit ab4500_init(void)
-{
- return spi_register_driver(&ab4500_driver);
-}
-
-static void __exit ab4500_exit(void)
-{
- spi_unregister_driver(&ab4500_driver);
-}
-
-subsys_initcall(ab4500_init);
-module_exit(ab4500_exit);
-
-MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
-MODULE_DESCRIPTION("AB4500 core driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
new file mode 100644
index 000000000000..f3d26fa9c34d
--- /dev/null
+++ b/drivers/mfd/ab8500-core.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * Interrupt register offsets
+ * Bank : 0x0E
+ */
+#define AB8500_IT_SOURCE1_REG 0x0E00
+#define AB8500_IT_SOURCE2_REG 0x0E01
+#define AB8500_IT_SOURCE3_REG 0x0E02
+#define AB8500_IT_SOURCE4_REG 0x0E03
+#define AB8500_IT_SOURCE5_REG 0x0E04
+#define AB8500_IT_SOURCE6_REG 0x0E05
+#define AB8500_IT_SOURCE7_REG 0x0E06
+#define AB8500_IT_SOURCE8_REG 0x0E07
+#define AB8500_IT_SOURCE19_REG 0x0E12
+#define AB8500_IT_SOURCE20_REG 0x0E13
+#define AB8500_IT_SOURCE21_REG 0x0E14
+#define AB8500_IT_SOURCE22_REG 0x0E15
+#define AB8500_IT_SOURCE23_REG 0x0E16
+#define AB8500_IT_SOURCE24_REG 0x0E17
+
+/*
+ * latch registers
+ */
+#define AB8500_IT_LATCH1_REG 0x0E20
+#define AB8500_IT_LATCH2_REG 0x0E21
+#define AB8500_IT_LATCH3_REG 0x0E22
+#define AB8500_IT_LATCH4_REG 0x0E23
+#define AB8500_IT_LATCH5_REG 0x0E24
+#define AB8500_IT_LATCH6_REG 0x0E25
+#define AB8500_IT_LATCH7_REG 0x0E26
+#define AB8500_IT_LATCH8_REG 0x0E27
+#define AB8500_IT_LATCH9_REG 0x0E28
+#define AB8500_IT_LATCH10_REG 0x0E29
+#define AB8500_IT_LATCH19_REG 0x0E32
+#define AB8500_IT_LATCH20_REG 0x0E33
+#define AB8500_IT_LATCH21_REG 0x0E34
+#define AB8500_IT_LATCH22_REG 0x0E35
+#define AB8500_IT_LATCH23_REG 0x0E36
+#define AB8500_IT_LATCH24_REG 0x0E37
+
+/*
+ * mask registers
+ */
+
+#define AB8500_IT_MASK1_REG 0x0E40
+#define AB8500_IT_MASK2_REG 0x0E41
+#define AB8500_IT_MASK3_REG 0x0E42
+#define AB8500_IT_MASK4_REG 0x0E43
+#define AB8500_IT_MASK5_REG 0x0E44
+#define AB8500_IT_MASK6_REG 0x0E45
+#define AB8500_IT_MASK7_REG 0x0E46
+#define AB8500_IT_MASK8_REG 0x0E47
+#define AB8500_IT_MASK9_REG 0x0E48
+#define AB8500_IT_MASK10_REG 0x0E49
+#define AB8500_IT_MASK11_REG 0x0E4A
+#define AB8500_IT_MASK12_REG 0x0E4B
+#define AB8500_IT_MASK13_REG 0x0E4C
+#define AB8500_IT_MASK14_REG 0x0E4D
+#define AB8500_IT_MASK15_REG 0x0E4E
+#define AB8500_IT_MASK16_REG 0x0E4F
+#define AB8500_IT_MASK17_REG 0x0E50
+#define AB8500_IT_MASK18_REG 0x0E51
+#define AB8500_IT_MASK19_REG 0x0E52
+#define AB8500_IT_MASK20_REG 0x0E53
+#define AB8500_IT_MASK21_REG 0x0E54
+#define AB8500_IT_MASK22_REG 0x0E55
+#define AB8500_IT_MASK23_REG 0x0E56
+#define AB8500_IT_MASK24_REG 0x0E57
+
+#define AB8500_REV_REG 0x1080
+
+/*
+ * Map interrupt numbers to the LATCH and MASK register offsets, Interrupt
+ * numbers are indexed into this array with (num / 8).
+ *
+ * This is one off from the register names, i.e. AB8500_IT_MASK1_REG is at
+ * offset 0.
+ */
+static const int ab8500_irq_regoffset[AB8500_NUM_IRQ_REGS] = {
+ 0, 1, 2, 3, 4, 6, 7, 8, 9, 18, 19, 20, 21,
+};
+
+static int __ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ int ret;
+
+ dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
+
+ ret = ab8500->write(ab8500, addr, data);
+ if (ret < 0)
+ dev_err(ab8500->dev, "failed to write reg %#x: %d\n",
+ addr, ret);
+
+ return ret;
+}
+
+/**
+ * ab8500_write() - write an AB8500 register
+ * @ab8500: device to write to
+ * @addr: address of the register
+ * @data: value to write
+ */
+int ab8500_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+ ret = __ab8500_write(ab8500, addr, data);
+ mutex_unlock(&ab8500->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_write);
+
+static int __ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+ int ret;
+
+ ret = ab8500->read(ab8500, addr);
+ if (ret < 0)
+ dev_err(ab8500->dev, "failed to read reg %#x: %d\n",
+ addr, ret);
+
+ dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
+
+ return ret;
+}
+
+/**
+ * ab8500_read() - read an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ */
+int ab8500_read(struct ab8500 *ab8500, u16 addr)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+ ret = __ab8500_read(ab8500, addr);
+ mutex_unlock(&ab8500->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_read);
+
+/**
+ * ab8500_set_bits() - set a bitfield in an AB8500 register
+ * @ab8500: device to read from
+ * @addr: address of the register
+ * @mask: mask of the bitfield to modify
+ * @data: value to set to the bitfield
+ */
+int ab8500_set_bits(struct ab8500 *ab8500, u16 addr, u8 mask, u8 data)
+{
+ int ret;
+
+ mutex_lock(&ab8500->lock);
+
+ ret = __ab8500_read(ab8500, addr);
+ if (ret < 0)
+ goto out;
+
+ ret &= ~mask;
+ ret |= data;
+
+ ret = __ab8500_write(ab8500, addr, ret);
+
+out:
+ mutex_unlock(&ab8500->lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ab8500_set_bits);
+
+static void ab8500_irq_lock(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+
+ mutex_lock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_sync_unlock(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int i;
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+ u8 old = ab8500->oldmask[i];
+ u8 new = ab8500->mask[i];
+ int reg;
+
+ if (new == old)
+ continue;
+
+ ab8500->oldmask[i] = new;
+
+ reg = AB8500_IT_MASK1_REG + ab8500_irq_regoffset[i];
+ ab8500_write(ab8500, reg, new);
+ }
+
+ mutex_unlock(&ab8500->irq_lock);
+}
+
+static void ab8500_irq_mask(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int offset = irq - ab8500->irq_base;
+ int index = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ ab8500->mask[index] |= mask;
+}
+
+static void ab8500_irq_unmask(unsigned int irq)
+{
+ struct ab8500 *ab8500 = get_irq_chip_data(irq);
+ int offset = irq - ab8500->irq_base;
+ int index = offset / 8;
+ int mask = 1 << (offset % 8);
+
+ ab8500->mask[index] &= ~mask;
+}
+
+static struct irq_chip ab8500_irq_chip = {
+ .name = "ab8500",
+ .bus_lock = ab8500_irq_lock,
+ .bus_sync_unlock = ab8500_irq_sync_unlock,
+ .mask = ab8500_irq_mask,
+ .unmask = ab8500_irq_unmask,
+};
+
+static irqreturn_t ab8500_irq(int irq, void *dev)
+{
+ struct ab8500 *ab8500 = dev;
+ int i;
+
+ dev_vdbg(ab8500->dev, "interrupt\n");
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++) {
+ int regoffset = ab8500_irq_regoffset[i];
+ int status;
+
+ status = ab8500_read(ab8500, AB8500_IT_LATCH1_REG + regoffset);
+ if (status <= 0)
+ continue;
+
+ do {
+ int bit = __ffs(status);
+ int line = i * 8 + bit;
+
+ handle_nested_irq(ab8500->irq_base + line);
+ status &= ~(1 << bit);
+ } while (status);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int ab8500_irq_init(struct ab8500 *ab8500)
+{
+ int base = ab8500->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+ set_irq_chip_data(irq, ab8500);
+ set_irq_chip_and_handler(irq, &ab8500_irq_chip,
+ handle_simple_irq);
+ set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ }
+
+ return 0;
+}
+
+static void ab8500_irq_remove(struct ab8500 *ab8500)
+{
+ int base = ab8500->irq_base;
+ int irq;
+
+ for (irq = base; irq < base + AB8500_NR_IRQS; irq++) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#endif
+ set_irq_chip_and_handler(irq, NULL, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+}
+
+static struct resource ab8500_gpadc_resources[] = {
+ {
+ .name = "HW_CONV_END",
+ .start = AB8500_INT_GP_HW_ADC_CONV_END,
+ .end = AB8500_INT_GP_HW_ADC_CONV_END,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "SW_CONV_END",
+ .start = AB8500_INT_GP_SW_ADC_CONV_END,
+ .end = AB8500_INT_GP_SW_ADC_CONV_END,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource ab8500_rtc_resources[] = {
+ {
+ .name = "60S",
+ .start = AB8500_INT_RTC_60S,
+ .end = AB8500_INT_RTC_60S,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ALARM",
+ .start = AB8500_INT_RTC_ALARM,
+ .end = AB8500_INT_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell ab8500_devs[] = {
+ {
+ .name = "ab8500-gpadc",
+ .num_resources = ARRAY_SIZE(ab8500_gpadc_resources),
+ .resources = ab8500_gpadc_resources,
+ },
+ {
+ .name = "ab8500-rtc",
+ .num_resources = ARRAY_SIZE(ab8500_rtc_resources),
+ .resources = ab8500_rtc_resources,
+ },
+ { .name = "ab8500-charger", },
+ { .name = "ab8500-audio", },
+ { .name = "ab8500-usb", },
+ { .name = "ab8500-pwm", },
+};
+
+int __devinit ab8500_init(struct ab8500 *ab8500)
+{
+ struct ab8500_platform_data *plat = dev_get_platdata(ab8500->dev);
+ int ret;
+ int i;
+
+ if (plat)
+ ab8500->irq_base = plat->irq_base;
+
+ mutex_init(&ab8500->lock);
+ mutex_init(&ab8500->irq_lock);
+
+ ret = ab8500_read(ab8500, AB8500_REV_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * 0x0 - Early Drop
+ * 0x10 - Cut 1.0
+ * 0x11 - Cut 1.1
+ */
+ if (ret == 0x0 || ret == 0x10 || ret == 0x11) {
+ ab8500->revision = ret;
+ dev_info(ab8500->dev, "detected chip, revision: %#x\n", ret);
+ } else {
+ dev_err(ab8500->dev, "unknown chip, revision: %#x\n", ret);
+ return -EINVAL;
+ }
+
+ if (plat && plat->init)
+ plat->init(ab8500);
+
+ /* Clear and mask all interrupts */
+ for (i = 0; i < 10; i++) {
+ ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+ ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ }
+
+ for (i = 18; i < 24; i++) {
+ ab8500_read(ab8500, AB8500_IT_LATCH1_REG + i);
+ ab8500_write(ab8500, AB8500_IT_MASK1_REG + i, 0xff);
+ }
+
+ for (i = 0; i < AB8500_NUM_IRQ_REGS; i++)
+ ab8500->mask[i] = ab8500->oldmask[i] = 0xff;
+
+ if (ab8500->irq_base) {
+ ret = ab8500_irq_init(ab8500);
+ if (ret)
+ return ret;
+
+ ret = request_threaded_irq(ab8500->irq, NULL, ab8500_irq,
+ IRQF_ONESHOT, "ab8500", ab8500);
+ if (ret)
+ goto out_removeirq;
+ }
+
+ ret = mfd_add_devices(ab8500->dev, -1, ab8500_devs,
+ ARRAY_SIZE(ab8500_devs), NULL,
+ ab8500->irq_base);
+ if (ret)
+ goto out_freeirq;
+
+ return ret;
+
+out_freeirq:
+ if (ab8500->irq_base) {
+ free_irq(ab8500->irq, ab8500);
+out_removeirq:
+ ab8500_irq_remove(ab8500);
+ }
+ return ret;
+}
+
+int __devexit ab8500_exit(struct ab8500 *ab8500)
+{
+ mfd_remove_devices(ab8500->dev);
+ if (ab8500->irq_base) {
+ free_irq(ab8500->irq, ab8500);
+ ab8500_irq_remove(ab8500);
+ }
+
+ return 0;
+}
+
+MODULE_AUTHOR("Srinidhi Kasagar, Rabin Vincent");
+MODULE_DESCRIPTION("AB8500 MFD core");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c
new file mode 100644
index 000000000000..b81d4f768ef6
--- /dev/null
+++ b/drivers/mfd/ab8500-spi.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/ab8500.h>
+
+/*
+ * This funtion writes to any AB8500 registers using
+ * SPI protocol & before it writes it packs the data
+ * in the below 24 bit frame format
+ *
+ * *|------------------------------------|
+ * *| 23|22...18|17.......10|9|8|7......0|
+ * *| r/w bank adr data |
+ * * ------------------------------------
+ *
+ * This function shouldn't be called from interrupt
+ * context
+ */
+static int ab8500_spi_write(struct ab8500 *ab8500, u16 addr, u8 data)
+{
+ struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+ dev);
+ unsigned long spi_data = addr << 10 | data;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+
+ ab8500->tx_buf[0] = spi_data;
+ ab8500->rx_buf[0] = 0;
+
+ xfer.tx_buf = ab8500->tx_buf;
+ xfer.rx_buf = NULL;
+ xfer.len = sizeof(unsigned long);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ return spi_sync(spi, &msg);
+}
+
+static int ab8500_spi_read(struct ab8500 *ab8500, u16 addr)
+{
+ struct spi_device *spi = container_of(ab8500->dev, struct spi_device,
+ dev);
+ unsigned long spi_data = 1 << 23 | addr << 10;
+ struct spi_transfer xfer;
+ struct spi_message msg;
+ int ret;
+
+ ab8500->tx_buf[0] = spi_data;
+ ab8500->rx_buf[0] = 0;
+
+ xfer.tx_buf = ab8500->tx_buf;
+ xfer.rx_buf = ab8500->rx_buf;
+ xfer.len = sizeof(unsigned long);
+
+ spi_message_init(&msg);
+ spi_message_add_tail(&xfer, &msg);
+
+ ret = spi_sync(spi, &msg);
+ if (!ret)
+ ret = ab8500->rx_buf[0];
+
+ return ret;
+}
+
+static int __devinit ab8500_spi_probe(struct spi_device *spi)
+{
+ struct ab8500 *ab8500;
+ int ret;
+
+ ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL);
+ if (!ab8500)
+ return -ENOMEM;
+
+ ab8500->dev = &spi->dev;
+ ab8500->irq = spi->irq;
+
+ ab8500->read = ab8500_spi_read;
+ ab8500->write = ab8500_spi_write;
+
+ spi_set_drvdata(spi, ab8500);
+
+ ret = ab8500_init(ab8500);
+ if (ret)
+ kfree(ab8500);
+
+ return ret;
+}
+
+static int __devexit ab8500_spi_remove(struct spi_device *spi)
+{
+ struct ab8500 *ab8500 = spi_get_drvdata(spi);
+
+ ab8500_exit(ab8500);
+ kfree(ab8500);
+
+ return 0;
+}
+
+static struct spi_driver ab8500_spi_driver = {
+ .driver = {
+ .name = "ab8500",
+ .owner = THIS_MODULE,
+ },
+ .probe = ab8500_spi_probe,
+ .remove = __devexit_p(ab8500_spi_remove)
+};
+
+static int __init ab8500_spi_init(void)
+{
+ return spi_register_driver(&ab8500_spi_driver);
+}
+subsys_initcall(ab8500_spi_init);
+
+static void __exit ab8500_spi_exit(void)
+{
+ spi_unregister_driver(&ab8500_spi_driver);
+}
+module_exit(ab8500_spi_exit);
+
+MODULE_AUTHOR("Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com");
+MODULE_DESCRIPTION("AB8500 SPI");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ab4500.h b/include/linux/mfd/ab4500.h
deleted file mode 100644
index a42a7033ae53..000000000000
--- a/include/linux/mfd/ab4500.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * AB4500 device core funtions, for client access
- */
-#ifndef MFD_AB4500_H
-#define MFD_AB4500_H
-
-#include <linux/device.h>
-
-/*
- * AB4500 bank addresses
- */
-#define AB4500_SYS_CTRL1_BLOCK 0x1
-#define AB4500_SYS_CTRL2_BLOCK 0x2
-#define AB4500_REGU_CTRL1 0x3
-#define AB4500_REGU_CTRL2 0x4
-#define AB4500_USB 0x5
-#define AB4500_TVOUT 0x6
-#define AB4500_DBI 0x7
-#define AB4500_ECI_AV_ACC 0x8
-#define AB4500_RESERVED 0x9
-#define AB4500_GPADC 0xA
-#define AB4500_CHARGER 0xB
-#define AB4500_GAS_GAUGE 0xC
-#define AB4500_AUDIO 0xD
-#define AB4500_INTERRUPT 0xE
-#define AB4500_RTC 0xF
-#define AB4500_MISC 0x10
-#define AB4500_DEBUG 0x12
-#define AB4500_PROD_TEST 0x13
-#define AB4500_OTP_EMUL 0x15
-
-/*
- * System control 1 register offsets.
- * Bank = 0x01
- */
-#define AB4500_TURNON_STAT_REG 0x0100
-#define AB4500_RESET_STAT_REG 0x0101
-#define AB4500_PONKEY1_PRESS_STAT_REG 0x0102
-
-#define AB4500_FSM_STAT1_REG 0x0140
-#define AB4500_FSM_STAT2_REG 0x0141
-#define AB4500_SYSCLK_REQ_STAT_REG 0x0142
-#define AB4500_USB_STAT1_REG 0x0143
-#define AB4500_USB_STAT2_REG 0x0144
-#define AB4500_STATUS_SPARE1_REG 0x0145
-#define AB4500_STATUS_SPARE2_REG 0x0146
-
-#define AB4500_CTRL1_REG 0x0180
-#define AB4500_CTRL2_REG 0x0181
-
-/*
- * System control 2 register offsets.
- * bank = 0x02
- */
-#define AB4500_CTRL3_REG 0x0200
-#define AB4500_MAIN_WDOG_CTRL_REG 0x0201
-#define AB4500_MAIN_WDOG_TIMER_REG 0x0202
-#define AB4500_LOW_BAT_REG 0x0203
-#define AB4500_BATT_OK_REG 0x0204
-#define AB4500_SYSCLK_TIMER_REG 0x0205
-#define AB4500_SMPSCLK_CTRL_REG 0x0206
-#define AB4500_SMPSCLK_SEL1_REG 0x0207
-#define AB4500_SMPSCLK_SEL2_REG 0x0208
-#define AB4500_SMPSCLK_SEL3_REG 0x0209
-#define AB4500_SYSULPCLK_CONF_REG 0x020A
-#define AB4500_SYSULPCLK_CTRL1_REG 0x020B
-#define AB4500_SYSCLK_CTRL_REG 0x020C
-#define AB4500_SYSCLK_REQ1_VALID_REG 0x020D
-#define AB4500_SYSCLK_REQ_VALID_REG 0x020E
-#define AB4500_SYSCTRL_SPARE_REG 0x020F
-#define AB4500_PAD_CONF_REG 0x0210
-
-/*
- * Regu control1 register offsets
- * Bank = 0x03
- */
-#define AB4500_REGU_SERIAL_CTRL1_REG 0x0300
-#define AB4500_REGU_SERIAL_CTRL2_REG 0x0301
-#define AB4500_REGU_SERIAL_CTRL3_REG 0x0302
-#define AB4500_REGU_REQ_CTRL1_REG 0x0303
-#define AB4500_REGU_REQ_CTRL2_REG 0x0304
-#define AB4500_REGU_REQ_CTRL3_REG 0x0305
-#define AB4500_REGU_REQ_CTRL4_REG 0x0306
-#define AB4500_REGU_MISC1_REG 0x0380
-#define AB4500_REGU_OTGSUPPLY_CTRL_REG 0x0381
-#define AB4500_REGU_VUSB_CTRL_REG 0x0382
-#define AB4500_REGU_VAUDIO_SUPPLY_REG 0x0383
-#define AB4500_REGU_CTRL1_SPARE_REG 0x0384
-
-/*
- * Regu control2 Vmod register offsets
- */
-#define AB4500_REGU_VMOD_REGU_REG 0x0440
-#define AB4500_REGU_VMOD_SEL1_REG 0x0441
-#define AB4500_REGU_VMOD_SEL2_REG 0x0442
-#define AB4500_REGU_CTRL_DISCH_REG 0x0443
-#define AB4500_REGU_CTRL_DISCH2_REG 0x0444
-
-/*
- * USB/ULPI register offsets
- * Bank : 0x5
- */
-#define AB4500_USB_LINE_STAT_REG 0x0580
-#define AB4500_USB_LINE_CTRL1_REG 0x0581
-#define AB4500_USB_LINE_CTRL2_REG 0x0582
-#define AB4500_USB_LINE_CTRL3_REG 0x0583
-#define AB4500_USB_LINE_CTRL4_REG 0x0584
-#define AB4500_USB_LINE_CTRL5_REG 0x0585
-#define AB4500_USB_OTG_CTRL_REG 0x0587
-#define AB4500_USB_OTG_STAT_REG 0x0588
-#define AB4500_USB_OTG_STAT_REG 0x0588
-#define AB4500_USB_CTRL_SPARE_REG 0x0589
-#define AB4500_USB_PHY_CTRL_REG 0x058A
-
-/*
- * TVOUT / CTRL register offsets
- * Bank : 0x06
- */
-#define AB4500_TVOUT_CTRL_REG 0x0680
-
-/*
- * DBI register offsets
- * Bank : 0x07
- */
-#define AB4500_DBI_REG1_REG 0x0700
-#define AB4500_DBI_REG2_REG 0x0701
-
-/*
- * ECI regsiter offsets
- * Bank : 0x08
- */
-#define AB4500_ECI_CTRL_REG 0x0800
-#define AB4500_ECI_HOOKLEVEL_REG 0x0801
-#define AB4500_ECI_DATAOUT_REG 0x0802
-#define AB4500_ECI_DATAIN_REG 0x0803
-
-/*
- * AV Connector register offsets
- * Bank : 0x08
- */
-#define AB4500_AV_CONN_REG 0x0840
-
-/*
- * Accessory detection register offsets
- * Bank : 0x08
- */
-#define AB4500_ACC_DET_DB1_REG 0x0880
-#define AB4500_ACC_DET_DB2_REG 0x0881
-
-/*
- * GPADC register offsets
- * Bank : 0x0A
- */
-#define AB4500_GPADC_CTRL1_REG 0x0A00
-#define AB4500_GPADC_CTRL2_REG 0x0A01
-#define AB4500_GPADC_CTRL3_REG 0x0A02
-#define AB4500_GPADC_AUTO_TIMER_REG 0x0A03
-#define AB4500_GPADC_STAT_REG 0x0A04
-#define AB4500_GPADC_MANDATAL_REG 0x0A05
-#define AB4500_GPADC_MANDATAH_REG 0x0A06
-#define AB4500_GPADC_AUTODATAL_REG 0x0A07
-#define AB4500_GPADC_AUTODATAH_REG 0x0A08
-#define AB4500_GPADC_MUX_CTRL_REG 0x0A09
-
-/*
- * Charger / status register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_STATUS1_REG 0x0B00
-#define AB4500_CH_STATUS2_REG 0x0B01
-#define AB4500_CH_USBCH_STAT1_REG 0x0B02
-#define AB4500_CH_USBCH_STAT2_REG 0x0B03
-#define AB4500_CH_FSM_STAT_REG 0x0B04
-#define AB4500_CH_STAT_REG 0x0B05
-
-/*
- * Charger / control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_CH_VOLT_LVL_REG 0x0B40
-
-/*
- * Charger / main control register offfsets
- * Bank : 0x0B
- */
-#define AB4500_MCH_CTRL1 0x0B80
-#define AB4500_MCH_CTRL2 0x0B81
-#define AB4500_MCH_IPT_CURLVL_REG 0x0B82
-#define AB4500_CH_WD_REG 0x0B83
-
-/*
- * Charger / USB control register offsets
- * Bank : 0x0B
- */
-#define AB4500_USBCH_CTRL1_REG 0x0BC0
-#define AB4500_USBCH_CTRL2_REG 0x0BC1
-#define AB4500_USBCH_IPT_CRNTLVL_REG 0x0BC2
-
-/*
- * RTC bank register offsets
- * Bank : 0xF
- */
-#define AB4500_RTC_SOFF_STAT_REG 0x0F00
-#define AB4500_RTC_CC_CONF_REG 0x0F01
-#define AB4500_RTC_READ_REQ_REG 0x0F02
-#define AB4500_RTC_WATCH_TSECMID_REG 0x0F03
-#define AB4500_RTC_WATCH_TSECHI_REG 0x0F04
-#define AB4500_RTC_WATCH_TMIN_LOW_REG 0x0F05
-#define AB4500_RTC_WATCH_TMIN_MID_REG 0x0F06
-#define AB4500_RTC_WATCH_TMIN_HI_REG 0x0F07
-#define AB4500_RTC_ALRM_MIN_LOW_REG 0x0F08
-#define AB4500_RTC_ALRM_MIN_MID_REG 0x0F09
-#define AB4500_RTC_ALRM_MIN_HI_REG 0x0F0A
-#define AB4500_RTC_STAT_REG 0x0F0B
-#define AB4500_RTC_BKUP_CHG_REG 0x0F0C
-#define AB4500_RTC_FORCE_BKUP_REG 0x0F0D
-#define AB4500_RTC_CALIB_REG 0x0F0E
-#define AB4500_RTC_SWITCH_STAT_REG 0x0F0F
-
-/*
- * PWM Out generators
- * Bank: 0x10
- */
-#define AB4500_PWM_OUT_CTRL1_REG 0x1060
-#define AB4500_PWM_OUT_CTRL2_REG 0x1061
-#define AB4500_PWM_OUT_CTRL3_REG 0x1062
-#define AB4500_PWM_OUT_CTRL4_REG 0x1063
-#define AB4500_PWM_OUT_CTRL5_REG 0x1064
-#define AB4500_PWM_OUT_CTRL6_REG 0x1065
-#define AB4500_PWM_OUT_CTRL7_REG 0x1066
-
-#define AB4500_I2C_PAD_CTRL_REG 0x1067
-#define AB4500_REV_REG 0x1080
-
-/**
- * struct ab4500
- * @spi: spi device structure
- * @tx_buf: transmit buffer
- * @rx_buf: receive buffer
- * @lock: sync primitive
- */
-struct ab4500 {
- struct spi_device *spi;
- unsigned long tx_buf[4];
- unsigned long rx_buf[4];
- struct mutex lock;
-};
-
-int ab4500_write(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr, unsigned char data);
-int ab4500_read(struct ab4500 *ab4500, unsigned char block,
- unsigned long addr);
-
-#endif /* MFD_AB4500_H */
diff --git a/include/linux/mfd/ab8500.h b/include/linux/mfd/ab8500.h
new file mode 100644
index 000000000000..b63ff3ba3351
--- /dev/null
+++ b/include/linux/mfd/ab8500.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ */
+#ifndef MFD_AB8500_H
+#define MFD_AB8500_H
+
+#include <linux/device.h>
+
+/*
+ * Interrupts
+ */
+
+#define AB8500_INT_MAIN_EXT_CH_NOT_OK 0
+#define AB8500_INT_UN_PLUG_TV_DET 1
+#define AB8500_INT_PLUG_TV_DET 2
+#define AB8500_INT_TEMP_WARM 3
+#define AB8500_INT_PON_KEY2DB_F 4
+#define AB8500_INT_PON_KEY2DB_R 5
+#define AB8500_INT_PON_KEY1DB_F 6
+#define AB8500_INT_PON_KEY1DB_R 7
+#define AB8500_INT_BATT_OVV 8
+#define AB8500_INT_MAIN_CH_UNPLUG_DET 10
+#define AB8500_INT_MAIN_CH_PLUG_DET 11
+#define AB8500_INT_USB_ID_DET_F 12
+#define AB8500_INT_USB_ID_DET_R 13
+#define AB8500_INT_VBUS_DET_F 14
+#define AB8500_INT_VBUS_DET_R 15
+#define AB8500_INT_VBUS_CH_DROP_END 16
+#define AB8500_INT_RTC_60S 17
+#define AB8500_INT_RTC_ALARM 18
+#define AB8500_INT_BAT_CTRL_INDB 20
+#define AB8500_INT_CH_WD_EXP 21
+#define AB8500_INT_VBUS_OVV 22
+#define AB8500_INT_MAIN_CH_DROP_END 23
+#define AB8500_INT_CCN_CONV_ACC 24
+#define AB8500_INT_INT_AUD 25
+#define AB8500_INT_CCEOC 26
+#define AB8500_INT_CC_INT_CALIB 27
+#define AB8500_INT_LOW_BAT_F 28
+#define AB8500_INT_LOW_BAT_R 29
+#define AB8500_INT_BUP_CHG_NOT_OK 30
+#define AB8500_INT_BUP_CHG_OK 31
+#define AB8500_INT_GP_HW_ADC_CONV_END 32
+#define AB8500_INT_ACC_DETECT_1DB_F 33
+#define AB8500_INT_ACC_DETECT_1DB_R 34
+#define AB8500_INT_ACC_DETECT_22DB_F 35
+#define AB8500_INT_ACC_DETECT_22DB_R 36
+#define AB8500_INT_ACC_DETECT_21DB_F 37
+#define AB8500_INT_ACC_DETECT_21DB_R 38
+#define AB8500_INT_GP_SW_ADC_CONV_END 39
+#define AB8500_INT_BTEMP_LOW 72
+#define AB8500_INT_BTEMP_LOW_MEDIUM 73
+#define AB8500_INT_BTEMP_MEDIUM_HIGH 74
+#define AB8500_INT_BTEMP_HIGH 75
+#define AB8500_INT_USB_CHARGER_NOT_OK 81
+#define AB8500_INT_ID_WAKEUP_R 82
+#define AB8500_INT_ID_DET_R1R 84
+#define AB8500_INT_ID_DET_R2R 85
+#define AB8500_INT_ID_DET_R3R 86
+#define AB8500_INT_ID_DET_R4R 87
+#define AB8500_INT_ID_WAKEUP_F 88
+#define AB8500_INT_ID_DET_R1F 90
+#define AB8500_INT_ID_DET_R2F 91
+#define AB8500_INT_ID_DET_R3F 92
+#define AB8500_INT_ID_DET_R4F 93
+#define AB8500_INT_USB_CHG_DET_DONE 94
+#define AB8500_INT_USB_CH_TH_PROT_F 96
+#define AB8500_INT_USB_CH_TH_PROP_R 97
+#define AB8500_INT_MAIN_CH_TH_PROP_F 98
+#define AB8500_INT_MAIN_CH_TH_PROT_R 99
+#define AB8500_INT_USB_CHARGER_NOT_OKF 103
+
+#define AB8500_NR_IRQS 104
+#define AB8500_NUM_IRQ_REGS 13
+
+/**
+ * struct ab8500 - ab8500 internal structure
+ * @dev: parent device
+ * @lock: read/write operations lock
+ * @irq_lock: genirq bus lock
+ * @revision: chip revision
+ * @irq: irq line
+ * @write: register write
+ * @read: register read
+ * @rx_buf: rx buf for SPI
+ * @tx_buf: tx buf for SPI
+ * @mask: cache of IRQ regs for bus lock
+ * @oldmask: cache of previous IRQ regs for bus lock
+ */
+struct ab8500 {
+ struct device *dev;
+ struct mutex lock;
+ struct mutex irq_lock;
+ int revision;
+ int irq_base;
+ int irq;
+
+ int (*write) (struct ab8500 *a8500, u16 addr, u8 data);
+ int (*read) (struct ab8500 *a8500, u16 addr);
+
+ unsigned long tx_buf[4];
+ unsigned long rx_buf[4];
+
+ u8 mask[AB8500_NUM_IRQ_REGS];
+ u8 oldmask[AB8500_NUM_IRQ_REGS];
+};
+
+/**
+ * struct ab8500_platform_data - AB8500 platform data
+ * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
+ * @init: board-specific initialization after detection of ab8500
+ */
+struct ab8500_platform_data {
+ int irq_base;
+ void (*init) (struct ab8500 *);
+};
+
+extern int ab8500_write(struct ab8500 *a8500, u16 addr, u8 data);
+extern int ab8500_read(struct ab8500 *a8500, u16 addr);
+extern int ab8500_set_bits(struct ab8500 *a8500, u16 addr, u8 mask, u8 data);
+
+extern int __devinit ab8500_init(struct ab8500 *ab8500);
+extern int __devexit ab8500_exit(struct ab8500 *ab8500);
+
+#endif /* MFD_AB8500_H */