Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / PHY updates from Greg KH:
 "Here is the big USB and PHY driver pull request for 5.3-rc1.

  Lots of stuff here, all of which has been in linux-next for a while
  with no reported issues. Nothing is earth-shattering, just constant
  forward progress for more devices supported and cleanups and small
  fixes:

   - USB gadget driver updates and fixes

   - new USB gadget driver for some hardware, followed by a quick revert
     of those patches as they were not ready to be merged...

   - PHY driver updates

   - Lots of new driver additions and cleanups with a few fixes mixed
     in"

* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  Revert "usb: gadget: storage: Remove warning message"
  Revert "dt-bindings: add binding for USBSS-DRD controller."
  Revert "usb:gadget Separated decoding functions from dwc3 driver."
  Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
  Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
  Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
  Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
  usb :fsl: Change string format for errata property
  usb: host: Stops USB controller init if PLL fails to lock
  usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
  usb: phy: Workaround for USB erratum-A005728
  usb: fsl: Set USB_EN bit to select ULPI phy
  usb: Handle USB3 remote wakeup for LPM enabled devices correctly
  drivers/usb/typec/tps6598x.c: fix 4CC cmd write
  drivers/usb/typec/tps6598x.c: fix portinfo width
  usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
  usb: renesas_usbhs: add a workaround for a race condition of workqueue
  usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
  usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
  USB: gadget: function: fix issue Unneeded variable: "value"
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/renesas,usb3.txt b/Documentation/devicetree/bindings/usb/renesas,usb3.txt
new file mode 100644
index 000000000000..35039e720515
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas,usb3.txt
@@ -0,0 +1,41 @@
+Renesas Electronics USB3.0 Peripheral driver
+
+Required properties:
+  - compatible: Must contain one of the following:
+	- "renesas,r8a774a1-usb3-peri"
+	- "renesas,r8a774c0-usb3-peri"
+	- "renesas,r8a7795-usb3-peri"
+	- "renesas,r8a7796-usb3-peri"
+	- "renesas,r8a77965-usb3-peri"
+	- "renesas,r8a77990-usb3-peri"
+	- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 or RZ/G2
+	  compatible device
+
+    When compatible with the generic version, nodes must list the
+    SoC-specific version corresponding to the platform first
+    followed by the generic version.
+
+  - reg: Base address and length of the register for the USB3.0 Peripheral
+  - interrupts: Interrupt specifier for the USB3.0 Peripheral
+  - clocks: clock phandle and specifier pair
+
+Optional properties:
+  - phys: phandle + phy specifier pair
+  - phy-names: must be "usb"
+
+Example of R-Car H3 ES1.x:
+	usb3_peri0: usb@ee020000 {
+		compatible = "renesas,r8a7795-usb3-peri",
+			     "renesas,rcar-gen3-usb3-peri";
+		reg = <0 0xee020000 0 0x400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 328>;
+	};
+
+	usb3_peri1: usb@ee060000 {
+		compatible = "renesas,r8a7795-usb3-peri",
+			     "renesas,rcar-gen3-usb3-peri";
+		reg = <0 0xee060000 0 0x400>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 327>;
+	};