summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2015-07-23 00:41:16 -0700
committerDavid S. Miller <davem@davemloft.net>2015-07-23 00:41:16 -0700
commitc5e40ee287db61a79af1746954ee03ebbf1ff8a3 (patch)
tree007da00e75e9b84766ac4868421705300e1e2e14 /Documentation
parent052831879945be0d9fad2216b127147c565ec1b1 (diff)
parentc5dfd654d0ec0a28fe81e7bd4d4fd984a9855e09 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio6
-rw-r--r--Documentation/DocBook/drm.tmpl2
-rw-r--r--Documentation/arm/SPEAr/overview.txt2
-rw-r--r--Documentation/device-mapper/cache.txt6
-rw-r--r--Documentation/device-mapper/thin-provisioning.txt9
-rw-r--r--Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt26
-rw-r--r--Documentation/kbuild/makefiles.txt8
7 files changed, 50 insertions, 9 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index bbed111c31b4..70c9b1ac66db 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -1234,10 +1234,8 @@ Description:
object is near the sensor, usually be observing
reflectivity of infrared or ultrasound emitted.
Often these sensors are unit less and as such conversion
- to SI units is not possible. Where it is, the units should
- be meters. If such a conversion is not possible, the reported
- values should behave in the same way as a distance, i.e. lower
- values indicate something is closer to the sensor.
+ to SI units is not possible. Higher proximity measurements
+ indicate closer objects, and vice versa.
What: /sys/.../iio:deviceX/in_illuminance_input
What: /sys/.../iio:deviceX/in_illuminance_raw
diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl
index c0312cbd023d..2fb9a5457522 100644
--- a/Documentation/DocBook/drm.tmpl
+++ b/Documentation/DocBook/drm.tmpl
@@ -3383,7 +3383,7 @@ void intel_crt_init(struct drm_device *dev)
<td valign="top" >TBD</td>
</tr>
<tr>
- <td rowspan="2" valign="top" >omap</td>
+ <td valign="top" >omap</td>
<td valign="top" >Generic</td>
<td valign="top" >“zorder”</td>
<td valign="top" >RANGE</td>
diff --git a/Documentation/arm/SPEAr/overview.txt b/Documentation/arm/SPEAr/overview.txt
index 65610bf52ebf..1b049be6c84f 100644
--- a/Documentation/arm/SPEAr/overview.txt
+++ b/Documentation/arm/SPEAr/overview.txt
@@ -60,4 +60,4 @@ Introduction
Document Author
---------------
- Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <vireshk@kernel.org>, (c) 2010-2012 ST Microelectronics
diff --git a/Documentation/device-mapper/cache.txt b/Documentation/device-mapper/cache.txt
index 82960cffbad3..785eab87aa71 100644
--- a/Documentation/device-mapper/cache.txt
+++ b/Documentation/device-mapper/cache.txt
@@ -258,6 +258,12 @@ cache metadata mode : ro if read-only, rw if read-write
no further I/O will be permitted and the status will just
contain the string 'Fail'. The userspace recovery tools
should then be used.
+needs_check : 'needs_check' if set, '-' if not set
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ cache can be made fully operational again. '-' indicates
+ needs_check is not set.
Messages
--------
diff --git a/Documentation/device-mapper/thin-provisioning.txt b/Documentation/device-mapper/thin-provisioning.txt
index 4f67578b2954..1699a55b7b70 100644
--- a/Documentation/device-mapper/thin-provisioning.txt
+++ b/Documentation/device-mapper/thin-provisioning.txt
@@ -296,7 +296,7 @@ ii) Status
underlying device. When this is enabled when loading the table,
it can get disabled if the underlying device doesn't support it.
- ro|rw
+ ro|rw|out_of_data_space
If the pool encounters certain types of device failures it will
drop into a read-only metadata mode in which no changes to
the pool metadata (like allocating new blocks) are permitted.
@@ -314,6 +314,13 @@ ii) Status
module parameter can be used to change this timeout -- it
defaults to 60 seconds but may be disabled using a value of 0.
+ needs_check
+ A metadata operation has failed, resulting in the needs_check
+ flag being set in the metadata's superblock. The metadata
+ device must be deactivated and checked/repaired before the
+ thin-pool can be made fully operational again. '-' indicates
+ needs_check is not set.
+
iii) Messages
create_thin <dev id>
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e549fff..971c3eedb1c7 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@ Optional properties:
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.
example:
@@ -75,9 +77,29 @@ display@di0 {
edid = [edid-data];
interface-pix-fmt = "rgb24";
- port {
+ port@0 {
+ reg = <0>;
+
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
};
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index e63b446d973c..13f888a02a3d 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -952,6 +952,14 @@ When kbuild executes, the following steps are followed (roughly):
$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
mode) if this option is supported by $(AR).
+ ARCH_CPPFLAGS, ARCH_AFLAGS, ARCH_CFLAGS Overrides the kbuild defaults
+
+ These variables are appended to the KBUILD_CPPFLAGS,
+ KBUILD_AFLAGS, and KBUILD_CFLAGS, respectively, after the
+ top-level Makefile has set any other flags. This provides a
+ means for an architecture to override the defaults.
+
+
--- 6.2 Add prerequisites to archheaders:
The archheaders: rule is used to generate header files that