omap2+: Allow hwmod state changes to mux pads based on the state changes

Allow hwmod state changes to mux pads based on the state changes.

By default, only enable and disable the pads. In some rare cases
dynamic remuxing for the idles states is needed, this can be done
by passing the enable, idle, and off pads from board-*.c file along
with OMAP_DEVICE_PAD_REMUX flag.

Thanks to Paul Walmsley <paul@booyaka.com> for the comments on the
hwmod related changes.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 48 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 27eb51a224cb..17bd6394d224 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -317,6 +317,54 @@ err1:
 	return NULL;
 }
 
+/* Assumes the calling function takes care of locking */
+void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
+{
+	int i;
+
+	for (i = 0; i < hmux->nr_pads; i++) {
+		struct omap_device_pad *pad = &hmux->pads[i];
+		int flags, val = -EINVAL;
+
+		flags = pad->flags;
+
+		switch (state) {
+		case _HWMOD_STATE_ENABLED:
+			if (flags & OMAP_DEVICE_PAD_ENABLED)
+				break;
+			flags |= OMAP_DEVICE_PAD_ENABLED;
+			val = pad->enable;
+			pr_debug("%s: Enabling %s %x\n", __func__,
+					pad->name, val);
+			break;
+		case _HWMOD_STATE_IDLE:
+			if (!(flags & OMAP_DEVICE_PAD_REMUX))
+				break;
+			flags &= ~OMAP_DEVICE_PAD_ENABLED;
+			val = pad->idle;
+			pr_debug("%s: Idling %s %x\n", __func__,
+					pad->name, val);
+			break;
+		case _HWMOD_STATE_DISABLED:
+		default:
+			/* Use safe mode unless OMAP_DEVICE_PAD_REMUX */
+			if (flags & OMAP_DEVICE_PAD_REMUX)
+				val = pad->off;
+			else
+				val = OMAP_MUX_MODE7;
+			flags &= ~OMAP_DEVICE_PAD_ENABLED;
+			pr_debug("%s: Disabling %s %x\n", __func__,
+					pad->name, val);
+		};
+
+		if (val >= 0) {
+			omap_mux_write(pad->partition, val,
+					pad->mux->reg_offset);
+			pad->flags = flags;
+		}
+	}
+}
+
 #ifdef CONFIG_DEBUG_FS
 
 #define OMAP_MUX_MAX_NR_FLAGS	10