Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "The overwhelming bulk of this pull request is a change from Uwe
  Kleine-König which changes the return type of the remove() function to
  void as part of some wider work he's doing to do this for all bus
  types, causing updates to most SPI device drivers. The branch with
  that on has been cross merged with a couple of other trees which added
  new SPI drivers this cycle, I'm not expecting any build issues
  resulting from the change.

  Otherwise it's been a relatively quiet release with some new device
  support, a few minor features and the welcome completion of the
  conversion of the subsystem to use GPIO descriptors rather than
  numbers:

   - Change return type of remove() to void.

   - Completion of the conversion of SPI controller drivers to use GPIO
     descriptors rather than numbers.

   - Quite a few DT schema conversions.

   - Support for multiple SPI devices on a bus in ACPI systems.

   - Big overhaul of the PXA2xx SPI driver.

   - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
     MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
     Sunplus SP7021"

[ And this is obviously where that spi change that snuck into the
  regulator tree _should_ have been :^]

* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
  spi: fsi: Implement a timeout for polling status
  spi: Fix erroneous sgs value with min_t()
  spi: tegra20: Use of_device_get_match_data()
  spi: mediatek: add ipm design support for MT7986
  spi: Add compatible for MT7986
  spi: sun4i: fix typos in comments
  spi: mediatek: support tick_delay without enhance_timing
  spi: Update clock-names property for arm pl022
  spi: rockchip-sfc: fix platform_get_irq.cocci warning
  spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
  spi: dt-bindings: samsung: Add fsd spi compatible
  spi: topcliff-pch: Prevent usage of potentially stale DMA device
  spi: tegra210-quad: combined sequence mode
  spi: tegra210-quad: add acpi support
  spi: npcm-fiu: Fix typo ("npxm")
  spi: Fix Tegra QSPI example
  spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
  spi: cadence: fix platform_get_irq.cocci warning
  spi: Update NXP Flexspi maintainer details
  dt-bindings: mfd: maxim,max77802: Convert to dtschema
  ...

1 files changed, 11 insertions, 15 deletions

diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e9bb02..a648e7094e84 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -510,10 +510,6 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
-static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
-};
-
 static void spitz_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -555,14 +551,6 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
-};
-
 static struct spi_board_info spitz_spi_devices[] = {
 	{
 		.modalias		= "ads7846",
@@ -570,7 +558,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 0,
 		.platform_data		= &spitz_ads7846_info,
-		.controller_data	= &spitz_ads7846_chip,
 		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
@@ -578,13 +565,11 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 1,
 		.platform_data		= &spitz_lcdcon_info,
-		.controller_data	= &spitz_lcdcon_chip,
 	}, {
 		.modalias		= "max1111",
 		.max_speed_hz		= 450000,
 		.bus_num		= 2,
 		.chip_select		= 2,
-		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
@@ -592,6 +577,16 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static struct gpiod_lookup_table spitz_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init spitz_spi_init(void)
 {
 	if (machine_is_akita())
@@ -599,6 +594,7 @@ static void __init spitz_spi_init(void)
 	else
 		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
+	gpiod_add_lookup_table(&spitz_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }