summaryrefslogtreecommitdiff
path: root/arch/arm/mach-sunxi
diff options
context:
space:
mode:
authorSamuel Holland <samuel@sholland.org>2021-01-17 23:50:33 -0600
committerMarc Zyngier <maz@kernel.org>2021-01-21 20:21:49 +0000
commit4e34614636b31747b190488240a95647c227021f (patch)
treeeef04b4979c76eab66def0c8c46ce0d5093dd9c1 /arch/arm/mach-sunxi
parent6436eb4417094ea3308b33d8392fc02a1068dc78 (diff)
irqchip/sun6i-r: Use a stacked irqchip driver
The R_INTC in the A31 and newer sun8i/sun50i SoCs is more similar to the original sun4i interrupt controller than the sun7i/sun9i NMI controller. It is used for two distinct purposes: - To control the trigger, latch, and mask for the NMI input pin - To provide the interrupt input for the ARISC coprocessor As this interrupt controller is not documented, information about it comes from vendor-provided firmware blobs and from experimentation. Differences from the sun4i interrupt controller appear to be: - It only has one or two registers of each kind (max 32 or 64 IRQs) - Multiplexing logic is added to support additional inputs - There is no FIQ-related logic - There is no interrupt priority logic In order to fulfill its two purposes, this hardware block combines four types of IRQs. First, the NMI pin is routed to the "IRQ 0" input on this chip, with a trigger type controlled by the NMI_CTRL_REG. The "IRQ 0 pending" output from this chip, if enabled, is then routed to a SPI IRQ input on the GIC. In other words, bit 0 of IRQ_ENABLE_REG *does* affect the NMI IRQ seen at the GIC. The NMI is followed by a contiguous block of 15 "direct" (my name for them) IRQ inputs that are connected in parallel to both R_INTC and the GIC. Or in other words, these bits of IRQ_ENABLE_REG *do not* affect the IRQs seen at the GIC. Following the direct IRQs are the ARISC's copy of banked IRQs for shared peripherals. These are not relevant to Linux. The remaining IRQs are connected to a multiplexer and provide access to the first (up to) 128 SPIs from the ARISC. This range of SPIs overlaps with the direct IRQs. Because of the 1:1 correspondence between R_INTC and GIC inputs, this is a perfect scenario for using a stacked irqchip driver. We want to hook into setting the NMI trigger type, but not actually handle any IRQ here. To allow access to all multiplexed IRQs, this driver requires a new binding where the interrupt number matches the GIC interrupt number. (This moves the NMI from number 0 to 32 or 96, depending on the SoC.) For simplicity, copy the three-cell GIC binding; this disambiguates interrupt 0 in the old binding (the NMI) from interrupt 0 in the new binding (SPI 0) by the number of cells. Since R_INTC is in the always-on power domain, and its output is visible to the power management coprocessor, a stacked irqchip driver provides a simple way to add wakeup support to any of its IRQs. That is the next patch; for now, just the NMI is moved over. This commit mostly reverts commit 173bda53b340 ("irqchip/sunxi-nmi: Support sun6i-a31-r-intc compatible"). Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210118055040.21910-4-samuel@sholland.org
Diffstat (limited to 'arch/arm/mach-sunxi')
-rw-r--r--arch/arm/mach-sunxi/Kconfig2
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index eeadb1a4dcfe..e5c2fce281cd 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,8 @@ menuconfig ARCH_SUNXI
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select GPIOLIB
+ select IRQ_DOMAIN_HIERARCHY
+ select IRQ_FASTEOI_HIERARCHY_HANDLERS
select PINCTRL
select PM_OPP
select SUN4I_TIMER