arm64: zynqmp: Add pinctrl description for all boards

The commit 1dccb5ec0123 ("dt-bindings: pinctrl: Add binding for ZynqMP
pinctrl driver") and commit 8b242ca700f8 ("pinctrl: Add Xilinx ZynqMP
pinctrl driver support") add support for Xilinx ZynqMP pinctrl driver
that's why describe pins configuration for current boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/d8bc42600da85f5a23d977d4b61e6528720573e5.1623684253.git.michal.simek@xilinx.com

1 files changed, 217 insertions, 1 deletions

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index 5c35edd736aa..7e1b024f71e1 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -2,7 +2,7 @@
 /*
  * dts file for Xilinx ZynqMP ZCU104
  *
- * (C) Copyright 2017 - 2019, Xilinx, Inc.
+ * (C) Copyright 2017 - 2021, Xilinx, Inc.
  *
  * Michal Simek <michal.simek@xilinx.com>
  */
@@ -12,6 +12,7 @@
 #include "zynqmp.dtsi"
 #include "zynqmp-clk-ccf.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
 #include <dt-bindings/phy/phy.h>
 
 / {
@@ -59,6 +60,8 @@
 
 &can1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
 };
 
 &dcc {
@@ -101,6 +104,8 @@
 	status = "okay";
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem3_default>;
 	phy0: ethernet-phy@c {
 		reg = <0xc>;
 		ti,rx-internal-delay = <0x8>;
@@ -117,6 +122,11 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
 
 	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
@@ -207,6 +217,204 @@
 	};
 };
 
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_can1_default: can1-default {
+		mux {
+			function = "can1";
+			groups = "can1_6_grp";
+		};
+
+		conf {
+			groups = "can1_6_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO25";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO24";
+			bias-disable;
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_4_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_4_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_16_grp", "gpio0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+	};
+
+	pinctrl_gem3_default: gem3-default {
+		mux {
+			function = "ethernet3";
+			groups = "ethernet3_0_grp";
+		};
+
+		conf {
+			groups = "ethernet3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74",
+									"MIO75";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68",
+									"MIO69";
+			bias-disable;
+			low-power-enable;
+		};
+
+		mux-mdio {
+			function = "mdio3";
+			groups = "mdio3_0_grp";
+		};
+
+		conf-mdio {
+			groups = "mdio3_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_0_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			drive-strength = <12>;
+		};
+
+		mux-cd {
+			groups = "sdio1_cd_0_grp";
+			function = "sdio1_cd";
+		};
+
+		conf-cd {
+			groups = "sdio1_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_4_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_4_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO18";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO19";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_5_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO21";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO20";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };
@@ -237,21 +445,29 @@
 &sdhci1 {
 	status = "okay";
 	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
 	xlnx,mio-bank = <1>;
 	disable-wp;
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
 };
 
 &uart1 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
 };
 
 /* ULPI SMSC USB3320 */
 &usb0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
 	dr_mode = "host";
 };