blackfin: twi: move twi bit mask macro to twi head file

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

6 files changed, 70 insertions, 396 deletions

diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
index e767d649dfc4..74d10237f706 100644
--- a/arch/blackfin/include/asm/bfin_twi.h
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -42,4 +42,74 @@ struct bfin_twi_regs {
 
 #undef __BFP
 
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
+#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low                    */
+#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low                 */
+
+/* TWI_PRESCALE Masks															*/
+#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz)    */
+#define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
+#define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
+
+/* TWI_SLAVE_CTL Masks															*/
+#define	SEN			0x0001	/* Slave Enable                                                                 */
+#define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
+#define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
+#define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
+#define	GEN			0x0010	/* General Call Address Matching Enabled                */
+
+/* TWI_SLAVE_STAT Masks															*/
+#define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL		0x0002	/* General Call Indicator                                               */
+
+/* TWI_MASTER_CTL Masks													*/
+#define	MEN			0x0001	/* Master Mode Enable                                           */
+#define	MADD_LEN	0x0002	/* Master Address Length                                        */
+#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
+#define	FAST		0x0008	/* Use Fast Mode Timing Specs                           */
+#define	STOP		0x0010	/* Issue Stop Condition                                         */
+#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer     */
+#define	DCNT		0x3FC0	/* Data Bytes To Transfer                                       */
+#define	SDAOVR		0x4000	/* Serial Data Override                                         */
+#define	SCLOVR		0x8000	/* Serial Clock Override                                        */
+
+/* TWI_MASTER_STAT Masks														*/
+#define	MPROG		0x0001	/* Master Transfer In Progress                                  */
+#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted)    */
+#define	ANAK		0x0004	/* Address Not Acknowledged                                             */
+#define	DNAK		0x0008	/* Data Not Acknowledged                                                */
+#define	BUFRDERR	0x0010	/* Buffer Read Error                                                    */
+#define	BUFWRERR	0x0020	/* Buffer Write Error                                                   */
+#define	SDASEN		0x0040	/* Serial Data Sense                                                    */
+#define	SCLSEN		0x0080	/* Serial Clock Sense                                                   */
+#define	BUSBUSY		0x0100	/* Bus Busy Indicator                                                   */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
+#define	SINIT		0x0001	/* Slave Transfer Initiated     */
+#define	SCOMP		0x0002	/* Slave Transfer Complete      */
+#define	SERR		0x0004	/* Slave Transfer Error         */
+#define	SOVF		0x0008	/* Slave Overflow                       */
+#define	MCOMP		0x0010	/* Master Transfer Complete     */
+#define	MERR		0x0020	/* Master Transfer Error        */
+#define	XMTSERV		0x0040	/* Transmit FIFO Service        */
+#define	RCVSERV		0x0080	/* Receive FIFO Service         */
+
+/* TWI_FIFO_CTRL Masks												*/
+#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                        */
+#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                         */
+#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length     */
+#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length      */
+
+/* TWI_FIFO_STAT Masks															*/
+#define	XMTSTAT		0x0003	/* Transmit FIFO Status                                                 */
+#define	XMT_EMPTY	0x0000	/*              Transmit FIFO Empty                                             */
+#define	XMT_HALF	0x0001	/*              Transmit FIFO Has 1 Byte To Write               */
+#define	XMT_FULL	0x0003	/*              Transmit FIFO Full (2 Bytes To Write)   */
+
+#define	RCVSTAT		0x000C	/* Receive FIFO Status                                                  */
+#define	RCV_EMPTY	0x0000	/*              Receive FIFO Empty                                              */
+#define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
+#define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
+
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h
index 729704078cd7..a818bb15cf0d 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF512.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h
@@ -1083,77 +1083,6 @@
 #define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
 
 
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)		/* Periods Clock Is Held Low			*/
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low			*/
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F		/* SCLKs Per Internal Time Reference (10MHz)	*/
-#define	TWI_ENA		0x0080		/* TWI Enable									*/
-#define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001		/* Slave Enable									*/
-#define	SADD_LEN	0x0002		/* Slave Address Length							*/
-#define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
-#define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
-#define GCALL		0x0002		/* General Call Indicator						*/
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001		/* Master Mode Enable						*/
-#define	MADD_LEN	0x0002		/* Master Address Length					*/
-#define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
-#define	FAST		0x0008		/* Use Fast Mode Timing Specs				*/
-#define	STOP		0x0010		/* Issue Stop Condition						*/
-#define	RSTART		0x0020		/* Repeat Start or Stop* At End Of Transfer	*/
-#define	DCNT		0x3FC0		/* Data Bytes To Transfer					*/
-#define	SDAOVR		0x4000		/* Serial Data Override						*/
-#define	SCLOVR		0x8000		/* Serial Clock Override					*/
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001		/* Master Transfer In Progress					*/
-#define	LOSTARB		0x0002		/* Lost Arbitration Indicator (Xfer Aborted)	*/
-#define	ANAK		0x0004		/* Address Not Acknowledged						*/
-#define	DNAK		0x0008		/* Data Not Acknowledged						*/
-#define	BUFRDERR	0x0010		/* Buffer Read Error							*/
-#define	BUFWRERR	0x0020		/* Buffer Write Error							*/
-#define	SDASEN		0x0040		/* Serial Data Sense							*/
-#define	SCLSEN		0x0080		/* Serial Clock Sense							*/
-#define	BUSBUSY		0x0100		/* Bus Busy Indicator							*/
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001		/* Slave Transfer Initiated	*/
-#define	SCOMP		0x0002		/* Slave Transfer Complete	*/
-#define	SERR		0x0004		/* Slave Transfer Error		*/
-#define	SOVF		0x0008		/* Slave Overflow			*/
-#define	MCOMP		0x0010		/* Master Transfer Complete	*/
-#define	MERR		0x0020		/* Master Transfer Error	*/
-#define	XMTSERV		0x0040		/* Transmit FIFO Service	*/
-#define	RCVSERV		0x0080		/* Receive FIFO Service		*/
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001		/* Transmit Buffer Flush			*/
-#define	RCVFLUSH	0x0002		/* Receive Buffer Flush				*/
-#define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length	*/
-#define	RCVINTLEN	0x0008		/* Receive Buffer Interrupt Length	*/
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003		/* Transmit FIFO Status							*/
-#define	XMT_EMPTY	0x0000		/* 		Transmit FIFO Empty						*/
-#define	XMT_HALF	0x0001		/* 		Transmit FIFO Has 1 Byte To Write		*/
-#define	XMT_FULL	0x0003		/* 		Transmit FIFO Full (2 Bytes To Write)	*/
-
-#define	RCVSTAT		0x000C		/* Receive FIFO Status							*/
-#define	RCV_EMPTY	0x0000		/* 		Receive FIFO Empty						*/
-#define	RCV_HALF	0x0004		/* 		Receive FIFO Has 1 Byte To Read			*/
-#define	RCV_FULL	0x000C		/* 		Receive FIFO Full (2 Bytes To Read)		*/
-
-
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
 #define	PJSE			0x0001			/* Port J SPI/SPORT Enable			*/
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
index 37d353a19722..e8fdacb8c64b 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -1084,77 +1084,6 @@
 #define ERR_NCOR		0x8000		/* Error Not Corrected Indicator	*/
 
 
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)		/* Periods Clock Is Held Low			*/
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low			*/
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F		/* SCLKs Per Internal Time Reference (10MHz)	*/
-#define	TWI_ENA		0x0080		/* TWI Enable									*/
-#define	SCCB		0x0200		/* SCCB Compatibility Enable					*/
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001		/* Slave Enable									*/
-#define	SADD_LEN	0x0002		/* Slave Address Length							*/
-#define	STDVAL		0x0004		/* Slave Transmit Data Valid					*/
-#define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call Adrress Matching Enabled		*/
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*)	*/
-#define GCALL		0x0002		/* General Call Indicator						*/
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001		/* Master Mode Enable						*/
-#define	MADD_LEN	0x0002		/* Master Address Length					*/
-#define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*)		*/
-#define	FAST		0x0008		/* Use Fast Mode Timing Specs				*/
-#define	STOP		0x0010		/* Issue Stop Condition						*/
-#define	RSTART		0x0020		/* Repeat Start or Stop* At End Of Transfer	*/
-#define	DCNT		0x3FC0		/* Data Bytes To Transfer					*/
-#define	SDAOVR		0x4000		/* Serial Data Override						*/
-#define	SCLOVR		0x8000		/* Serial Clock Override					*/
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001		/* Master Transfer In Progress					*/
-#define	LOSTARB		0x0002		/* Lost Arbitration Indicator (Xfer Aborted)	*/
-#define	ANAK		0x0004		/* Address Not Acknowledged						*/
-#define	DNAK		0x0008		/* Data Not Acknowledged						*/
-#define	BUFRDERR	0x0010		/* Buffer Read Error							*/
-#define	BUFWRERR	0x0020		/* Buffer Write Error							*/
-#define	SDASEN		0x0040		/* Serial Data Sense							*/
-#define	SCLSEN		0x0080		/* Serial Clock Sense							*/
-#define	BUSBUSY		0x0100		/* Bus Busy Indicator							*/
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001		/* Slave Transfer Initiated	*/
-#define	SCOMP		0x0002		/* Slave Transfer Complete	*/
-#define	SERR		0x0004		/* Slave Transfer Error		*/
-#define	SOVF		0x0008		/* Slave Overflow			*/
-#define	MCOMP		0x0010		/* Master Transfer Complete	*/
-#define	MERR		0x0020		/* Master Transfer Error	*/
-#define	XMTSERV		0x0040		/* Transmit FIFO Service	*/
-#define	RCVSERV		0x0080		/* Receive FIFO Service		*/
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001		/* Transmit Buffer Flush			*/
-#define	RCVFLUSH	0x0002		/* Receive Buffer Flush				*/
-#define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length	*/
-#define	RCVINTLEN	0x0008		/* Receive Buffer Interrupt Length	*/
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003		/* Transmit FIFO Status							*/
-#define	XMT_EMPTY	0x0000		/* 		Transmit FIFO Empty						*/
-#define	XMT_HALF	0x0001		/* 		Transmit FIFO Has 1 Byte To Write		*/
-#define	XMT_FULL	0x0003		/* 		Transmit FIFO Full (2 Bytes To Write)	*/
-
-#define	RCVSTAT		0x000C		/* Receive FIFO Status							*/
-#define	RCV_EMPTY	0x0000		/* 		Receive FIFO Empty						*/
-#define	RCV_HALF	0x0004		/* 		Receive FIFO Has 1 Byte To Read			*/
-#define	RCV_FULL	0x000C		/* 		Receive FIFO Full (2 Bytes To Read)		*/
-
-
 /* Omit CAN masks from defBF534.h */
 
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 4a031dde173f..d0deb66e6e80 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1403,75 +1403,6 @@
 #define ERR_DET			0x4000	/* Error Detected Indicator                     */
 #define ERR_NCOR		0x8000	/* Error Not Corrected Indicator        */
 
-/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )				*/
-#define	CLKLOW(x)	((x) & 0xFF)	/* Periods Clock Is Held Low                    */
-#define CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low                 */
-
-/* TWI_PRESCALE Masks															*/
-#define	PRESCALE	0x007F	/* SCLKs Per Internal Time Reference (10MHz)    */
-#define	TWI_ENA		0x0080	/* TWI Enable                                                                   */
-#define	SCCB		0x0200	/* SCCB Compatibility Enable                                    */
-
-/* TWI_SLAVE_CTL Masks															*/
-#define	SEN			0x0001	/* Slave Enable                                                                 */
-#define	SADD_LEN	0x0002	/* Slave Address Length                                                 */
-#define	STDVAL		0x0004	/* Slave Transmit Data Valid                                    */
-#define	NAK			0x0008	/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010	/* General Call Address Matching Enabled                */
-
-/* TWI_SLAVE_STAT Masks															*/
-#define	SDIR		0x0001	/* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL		0x0002	/* General Call Indicator                                               */
-
-/* TWI_MASTER_CTL Masks													*/
-#define	MEN			0x0001	/* Master Mode Enable                                           */
-#define	MADD_LEN	0x0002	/* Master Address Length                                        */
-#define	MDIR		0x0004	/* Master Transmit Direction (RX/TX*)           */
-#define	FAST		0x0008	/* Use Fast Mode Timing Specs                           */
-#define	STOP		0x0010	/* Issue Stop Condition                                         */
-#define	RSTART		0x0020	/* Repeat Start or Stop* At End Of Transfer     */
-#define	DCNT		0x3FC0	/* Data Bytes To Transfer                                       */
-#define	SDAOVR		0x4000	/* Serial Data Override                                         */
-#define	SCLOVR		0x8000	/* Serial Clock Override                                        */
-
-/* TWI_MASTER_STAT Masks														*/
-#define	MPROG		0x0001	/* Master Transfer In Progress                                  */
-#define	LOSTARB		0x0002	/* Lost Arbitration Indicator (Xfer Aborted)    */
-#define	ANAK		0x0004	/* Address Not Acknowledged                                             */
-#define	DNAK		0x0008	/* Data Not Acknowledged                                                */
-#define	BUFRDERR	0x0010	/* Buffer Read Error                                                    */
-#define	BUFWRERR	0x0020	/* Buffer Write Error                                                   */
-#define	SDASEN		0x0040	/* Serial Data Sense                                                    */
-#define	SCLSEN		0x0080	/* Serial Clock Sense                                                   */
-#define	BUSBUSY		0x0100	/* Bus Busy Indicator                                                   */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks						*/
-#define	SINIT		0x0001	/* Slave Transfer Initiated     */
-#define	SCOMP		0x0002	/* Slave Transfer Complete      */
-#define	SERR		0x0004	/* Slave Transfer Error         */
-#define	SOVF		0x0008	/* Slave Overflow                       */
-#define	MCOMP		0x0010	/* Master Transfer Complete     */
-#define	MERR		0x0020	/* Master Transfer Error        */
-#define	XMTSERV		0x0040	/* Transmit FIFO Service        */
-#define	RCVSERV		0x0080	/* Receive FIFO Service         */
-
-/* TWI_FIFO_CTRL Masks												*/
-#define	XMTFLUSH	0x0001	/* Transmit Buffer Flush                        */
-#define	RCVFLUSH	0x0002	/* Receive Buffer Flush                         */
-#define	XMTINTLEN	0x0004	/* Transmit Buffer Interrupt Length     */
-#define	RCVINTLEN	0x0008	/* Receive Buffer Interrupt Length      */
-
-/* TWI_FIFO_STAT Masks															*/
-#define	XMTSTAT		0x0003	/* Transmit FIFO Status                                                 */
-#define	XMT_EMPTY	0x0000	/*              Transmit FIFO Empty                                             */
-#define	XMT_HALF	0x0001	/*              Transmit FIFO Has 1 Byte To Write               */
-#define	XMT_FULL	0x0003	/*              Transmit FIFO Full (2 Bytes To Write)   */
-
-#define	RCVSTAT		0x000C	/* Receive FIFO Status                                                  */
-#define	RCV_EMPTY	0x0000	/*              Receive FIFO Empty                                              */
-#define	RCV_HALF	0x0004	/*              Receive FIFO Has 1 Byte To Read                 */
-#define	RCV_FULL	0x000C	/*              Receive FIFO Full (2 Bytes To Read)             */
 
 /*  *******************  PIN CONTROL REGISTER MASKS  ************************/
 /* PORT_MUX Masks															*/
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF538.h b/arch/blackfin/mach-bf538/include/mach/defBF538.h
index d27f81d6c4b1..f5aaf0573c07 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF538.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF538.h
@@ -1746,80 +1746,4 @@
 #define	SDEASE			0x00000010 /* SDRAM EAB	sticky error status - W1C */
 #define	BGSTAT			0x00000020 /* Bus granted */
 
-
-/*  ********************  TWO-WIRE INTERFACE (TWIx) MASKS  ***********************/
-/* TWIx_CLKDIV Macros (Use: *pTWIx_CLKDIV = CLKLOW(x)|CLKHI(y);	 ) */
-#ifdef _MISRA_RULES
-#define	CLKLOW(x)	((x) & 0xFFu)		/* Periods Clock Is Held Low */
-#define	CLKHI(y)	(((y)&0xFFu)<<0x8)	/* Periods Before New Clock Low */
-#else
-#define	CLKLOW(x)	((x) & 0xFF)		/* Periods Clock Is Held Low */
-#define	CLKHI(y)	(((y)&0xFF)<<0x8)	/* Periods Before New Clock Low */
-#endif /* _MISRA_RULES */
-
-/* TWIx_PRESCALE Masks								 */
-#define	PRESCALE	0x007F		/* SCLKs Per Internal Time Reference (10MHz) */
-#define	TWI_ENA		0x0080		/* TWI Enable		 */
-#define	SCCB		0x0200		/* SCCB	Compatibility Enable */
-
-/* TWIx_SLAVE_CTRL Masks								 */
-#define	SEN			0x0001		/* Slave Enable		 */
-#define	SADD_LEN	0x0002		/* Slave Address Length */
-#define	STDVAL		0x0004		/* Slave Transmit Data Valid */
-#define	NAK			0x0008		/* NAK/ACK* Generated At Conclusion Of Transfer */
-#define	GEN			0x0010		/* General Call	Adrress	Matching Enabled */
-
-/* TWIx_SLAVE_STAT Masks								 */
-#define	SDIR		0x0001		/* Slave Transfer Direction (Transmit/Receive*) */
-#define	GCALL		0x0002		/* General Call	Indicator */
-
-/* TWIx_MASTER_CTRL Masks						 */
-#define	MEN			0x0001		/* Master Mode Enable */
-#define	MADD_LEN	0x0002		/* Master Address Length */
-#define	MDIR		0x0004		/* Master Transmit Direction (RX/TX*) */
-#define	FAST		0x0008		/* Use Fast Mode Timing	Specs */
-#define	STOP		0x0010		/* Issue Stop Condition */
-#define	RSTART		0x0020		/* Repeat Start	or Stop* At End	Of Transfer */
-#define	DCNT		0x3FC0		/* Data	Bytes To Transfer */
-#define	SDAOVR		0x4000		/* Serial Data Override */
-#define	SCLOVR		0x8000		/* Serial Clock	Override */
-
-/* TWIx_MASTER_STAT Masks							 */
-#define	MPROG		0x0001		/* Master Transfer In Progress */
-#define	LOSTARB		0x0002		/* Lost	Arbitration Indicator (Xfer Aborted) */
-#define	ANAK		0x0004		/* Address Not Acknowledged */
-#define	DNAK		0x0008		/* Data	Not Acknowledged */
-#define	BUFRDERR	0x0010		/* Buffer Read Error */
-#define	BUFWRERR	0x0020		/* Buffer Write	Error */
-#define	SDASEN		0x0040		/* Serial Data Sense */
-#define	SCLSEN		0x0080		/* Serial Clock	Sense */
-#define	BUSBUSY		0x0100		/* Bus Busy Indicator */
-
-/* TWIx_INT_SRC	and TWIx_INT_ENABLE Masks */
-#define	SINIT		0x0001		/* Slave Transfer Initiated */
-#define	SCOMP		0x0002		/* Slave Transfer Complete */
-#define	SERR		0x0004		/* Slave Transfer Error */
-#define	SOVF		0x0008		/* Slave Overflow */
-#define	MCOMP		0x0010		/* Master Transfer Complete */
-#define	MERR		0x0020		/* Master Transfer Error */
-#define	XMTSERV		0x0040		/* Transmit FIFO Service */
-#define	RCVSERV		0x0080		/* Receive FIFO	Service */
-
-/* TWIx_FIFO_CTL Masks					 */
-#define	XMTFLUSH	0x0001		/* Transmit Buffer Flush */
-#define	RCVFLUSH	0x0002		/* Receive Buffer Flush */
-#define	XMTINTLEN	0x0004		/* Transmit Buffer Interrupt Length */
-#define	RCVINTLEN	0x0008		/* Receive Buffer Interrupt Length */
-
-/* TWIx_FIFO_STAT Masks								 */
-#define	XMTSTAT		0x0003		/* Transmit FIFO Status */
-#define	XMT_EMPTY	0x0000		/*		Transmit FIFO Empty */
-#define	XMT_HALF	0x0001		/*		Transmit FIFO Has 1 Byte To Write */
-#define	XMT_FULL	0x0003		/*		Transmit FIFO Full (2 Bytes To Write) */
-
-#define	RCVSTAT		0x000C		/* Receive FIFO	Status */
-#define	RCV_EMPTY	0x0000		/*		Receive	FIFO Empty */
-#define	RCV_HALF	0x0004		/*		Receive	FIFO Has 1 Byte	To Read */
-#define	RCV_FULL	0x000C		/*		Receive	FIFO Full (2 Bytes To Read) */
-
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
index 0867c2bedb43..b0102306035d 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
@@ -2062,115 +2062,6 @@
 #define                  LOW_EVEN  0xff0000   /* Lower Limit for Even Bytes (Luma) */
 #define                 HIGH_EVEN  0xff000000 /* Upper Limit for Even Bytes (Luma) */
 
-/* ************************************************ */
-/* The TWI bit masks fields are from the ADSP-BF538 */
-/* and they have not been verified as the final     */
-/* ones for the Moab processors ... bz 1/19/2007    */
-/* ************************************************ */
-
-/* Bit masks for TWIx_CONTROL */
-
-#define                  PRESCALE  0x7f       /* Prescale Value */
-#define                   TWI_ENA  0x80       /* TWI Enable */
-#define                      SCCB  0x200      /* Serial Camera Control Bus */
-
-/* Bit maskes for TWIx_CLKDIV */
-
-#define                    CLKLOW  0xff       /* Clock Low */
-#define                     CLKHI  0xff00     /* Clock High */
-
-/* Bit maskes for TWIx_SLAVE_CTL */
-
-#define                       SEN  0x1        /* Slave Enable */
-#define                    STDVAL  0x4        /* Slave Transmit Data Valid */
-#define                       NAK  0x8        /* Not Acknowledge */
-#define                       GEN  0x10       /* General Call Enable */
-
-/* Bit maskes for TWIx_SLAVE_ADDR */
-
-#define                     SADDR  0x7f       /* Slave Mode Address */
-
-/* Bit maskes for TWIx_SLAVE_STAT */
-
-#define                      SDIR  0x1        /* Slave Transfer Direction */
-#define                     GCALL  0x2        /* General Call */
-
-/* Bit maskes for TWIx_MASTER_CTL */
-
-#define                       MEN  0x1        /* Master Mode Enable */
-#define                      MDIR  0x4        /* Master Transfer Direction */
-#define                      FAST  0x8        /* Fast Mode */
-#define                      STOP  0x10       /* Issue Stop Condition */
-#define                    RSTART  0x20       /* Repeat Start */
-#define                      DCNT  0x3fc0     /* Data Transfer Count */
-#define                    SDAOVR  0x4000     /* Serial Data Override */
-#define                    SCLOVR  0x8000     /* Serial Clock Override */
-
-/* Bit maskes for TWIx_MASTER_ADDR */
-
-#define                     MADDR  0x7f       /* Master Mode Address */
-
-/* Bit maskes for TWIx_MASTER_STAT */
-
-#define                     MPROG  0x1        /* Master Transfer in Progress */
-#define                   LOSTARB  0x2        /* Lost Arbitration */
-#define                      ANAK  0x4        /* Address Not Acknowledged */
-#define                      DNAK  0x8        /* Data Not Acknowledged */
-#define                  BUFRDERR  0x10       /* Buffer Read Error */
-#define                  BUFWRERR  0x20       /* Buffer Write Error */
-#define                    SDASEN  0x40       /* Serial Data Sense */
-#define                    SCLSEN  0x80       /* Serial Clock Sense */
-#define                   BUSBUSY  0x100      /* Bus Busy */
-
-/* Bit maskes for TWIx_FIFO_CTL */
-
-#define                  XMTFLUSH  0x1        /* Transmit Buffer Flush */
-#define                  RCVFLUSH  0x2        /* Receive Buffer Flush */
-#define                 XMTINTLEN  0x4        /* Transmit Buffer Interrupt Length */
-#define                 RCVINTLEN  0x8        /* Receive Buffer Interrupt Length */
-
-/* Bit maskes for TWIx_FIFO_STAT */
-
-#define                   XMTSTAT  0x3        /* Transmit FIFO Status */
-#define                   RCVSTAT  0xc        /* Receive FIFO Status */
-
-/* Bit maskes for TWIx_INT_MASK */
-
-#define                    SINITM  0x1        /* Slave Transfer Initiated Interrupt Mask */
-#define                    SCOMPM  0x2        /* Slave Transfer Complete Interrupt Mask */
-#define                     SERRM  0x4        /* Slave Transfer Error Interrupt Mask */
-#define                     SOVFM  0x8        /* Slave Overflow Interrupt Mask */
-#define                    MCOMPM  0x10       /* Master Transfer Complete Interrupt Mask */
-#define                     MERRM  0x20       /* Master Transfer Error Interrupt Mask */
-#define                  XMTSERVM  0x40       /* Transmit FIFO Service Interrupt Mask */
-#define                  RCVSERVM  0x80       /* Receive FIFO Service Interrupt Mask */
-
-/* Bit maskes for TWIx_INT_STAT */
-
-#define                     SINIT  0x1        /* Slave Transfer Initiated */
-#define                     SCOMP  0x2        /* Slave Transfer Complete */
-#define                      SERR  0x4        /* Slave Transfer Error */
-#define                      SOVF  0x8        /* Slave Overflow */
-#define                     MCOMP  0x10       /* Master Transfer Complete */
-#define                      MERR  0x20       /* Master Transfer Error */
-#define                   XMTSERV  0x40       /* Transmit FIFO Service */
-#define                   RCVSERV  0x80       /* Receive FIFO Service */
-
-/* Bit maskes for TWIx_XMT_DATA8 */
-
-#define                  XMTDATA8  0xff       /* Transmit FIFO 8-Bit Data */
-
-/* Bit maskes for TWIx_XMT_DATA16 */
-
-#define                 XMTDATA16  0xffff     /* Transmit FIFO 16-Bit Data */
-
-/* Bit maskes for TWIx_RCV_DATA8 */
-
-#define                  RCVDATA8  0xff       /* Receive FIFO 8-Bit Data */
-
-/* Bit maskes for TWIx_RCV_DATA16 */
-
-#define                 RCVDATA16  0xffff     /* Receive FIFO 16-Bit Data */
 
 /* ******************************************* */
 /*     MULTI BIT MACRO ENUMERATIONS            */