Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 908 insertions, 0 deletions

diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
new file mode 100644
index 000000000000..9ba0b957d11f
--- /dev/null
+++ b/arch/i386/kernel/acpi/boot.c
@@ -0,0 +1,908 @@
+/*
+ *  boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpspec.h>
+
+#ifdef	CONFIG_X86_64
+
+static inline void  acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+extern void __init clustered_apic_check(void);
+static inline int ioapic_setup_disabled(void) { return 0; }
+#include <asm/proto.h>
+
+#else	/* X86 */
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#endif	/* CONFIG_X86_LOCAL_APIC */
+
+#endif	/* X86 */
+
+#define BAD_MADT_ENTRY(entry, end) (					    \
+		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
+		((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX			"ACPI: "
+
+#ifdef CONFIG_ACPI_PCI
+int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
+int acpi_ht __initdata = 1;	/* enable HT */
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+EXPORT_SYMBOL(acpi_strict);
+
+acpi_interrupt_flags acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
+#define MAX_MADT_ENTRIES	256
+u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
+			{ [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+EXPORT_SYMBOL(x86_acpiid_to_apicid);
+
+/* --------------------------------------------------------------------------
+                              Boot-time Configuration
+   -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259).  This gets
+ * overriden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id		acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+#ifdef	CONFIG_X86_64
+
+/* rely on all ACPI tables being in the direct mapping */
+char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+	if (!phys_addr || !size)
+	return NULL;
+
+	if (phys_addr < (end_pfn_map << PAGE_SHIFT))
+		return __va(phys_addr);
+
+	return NULL;
+}
+
+#else
+
+/*
+ * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
+ * to map the target physical address. The problem is that set_fixmap()
+ * provides a single page, and it is possible that the page is not
+ * sufficient.
+ * By using this area, we can map up to MAX_IO_APICS pages temporarily,
+ * i.e. until the next __va_range() call.
+ *
+ * Important Safety Note:  The fixed I/O APIC page numbers are *subtracted*
+ * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
+ * count idx down while incrementing the phys address.
+ */
+char *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	unsigned long base, offset, mapped_size;
+	int idx;
+
+	if (phys + size < 8*1024*1024) 
+		return __va(phys); 
+
+	offset = phys & (PAGE_SIZE - 1);
+	mapped_size = PAGE_SIZE - offset;
+	set_fixmap(FIX_ACPI_END, phys);
+	base = fix_to_virt(FIX_ACPI_END);
+
+	/*
+	 * Most cases can be covered by the below.
+	 */
+	idx = FIX_ACPI_END;
+	while (mapped_size < size) {
+		if (--idx < FIX_ACPI_BEGIN)
+			return NULL;	/* cannot handle this */
+		phys += PAGE_SIZE;
+		set_fixmap(idx, phys);
+		mapped_size += PAGE_SIZE;
+	}
+
+	return ((unsigned char *) base + offset);
+}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_mcfg *mcfg;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+	if (!mcfg) {
+		printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
+		return -ENODEV;
+	}
+
+	if (mcfg->base_reserved) {
+		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+		return -ENODEV;
+	}
+
+	pci_mmcfg_base_addr = mcfg->base_address;
+
+	return 0;
+}
+#else
+#define	acpi_parse_mcfg NULL
+#endif /* !CONFIG_PCI_MMCONFIG */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init
+acpi_parse_madt (
+	unsigned long		phys_addr,
+	unsigned long		size)
+{
+	struct acpi_table_madt	*madt = NULL;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+	if (!madt) {
+		printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+		return -ENODEV;
+	}
+
+	if (madt->lapic_address) {
+		acpi_lapic_addr = (u64) madt->lapic_address;
+
+		printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+			madt->lapic_address);
+	}
+
+	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+	
+	return 0;
+}
+
+
+static int __init
+acpi_parse_lapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic	*processor = NULL;
+
+	processor = (struct acpi_table_lapic*) header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* no utility in registering a disabled processor */
+	if (processor->flags.enabled == 0)
+		return 0;
+
+	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
+
+	mp_register_lapic (
+		processor->id,					   /* APIC ID */
+		processor->flags.enabled);			  /* Enabled? */
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+
+	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+
+	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+		return -EINVAL;
+
+	acpi_lapic_addr = lapic_addr_ovr->address;
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+
+	lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+
+	if (BAD_MADT_ENTRY(lapic_nmi, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (lapic_nmi->lint != 1)
+		printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+	return 0;
+}
+
+
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+
+static int __init
+acpi_parse_ioapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_ioapic *ioapic = NULL;
+
+	ioapic = (struct acpi_table_ioapic*) header;
+
+	if (BAD_MADT_ENTRY(ioapic, end))
+		return -EINVAL;
+ 
+	acpi_table_print_madt_entry(header);
+
+	mp_register_ioapic (
+		ioapic->id,
+		ioapic->address,
+		ioapic->global_irq_base);
+ 
+	return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+{
+	if (trigger == 0)	/* compatible SCI trigger is level */
+		trigger = 3;
+
+	if (polarity == 0)	/* compatible SCI polarity is low */
+		polarity = 3;
+
+	/* Command-line over-ride via acpi_sci= */
+	if (acpi_sci_flags.trigger)
+		trigger = acpi_sci_flags.trigger;
+
+	if (acpi_sci_flags.polarity)
+		polarity = acpi_sci_flags.polarity;
+
+	/*
+ 	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+	 * If GSI is < 16, this will update its flags,
+	 * else it will create a new mp_irqs[] entry.
+	 */
+	mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+
+	/*
+	 * stash over-ride to indicate we've been here
+	 * and for later update of acpi_fadt
+	 */
+	acpi_sci_override_gsi = gsi;
+	return;
+}
+
+static int __init
+acpi_parse_int_src_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_int_src_ovr *intsrc = NULL;
+
+	intsrc = (struct acpi_table_int_src_ovr*) header;
+
+	if (BAD_MADT_ENTRY(intsrc, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (intsrc->bus_irq == acpi_fadt.sci_int) {
+		acpi_sci_ioapic_setup(intsrc->global_irq,
+			intsrc->flags.polarity, intsrc->flags.trigger);
+		return 0;
+	}
+
+	if (acpi_skip_timer_override &&
+		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			return 0;
+	}
+
+	mp_override_legacy_irq (
+		intsrc->bus_irq,
+		intsrc->flags.polarity,
+		intsrc->flags.trigger,
+		intsrc->global_irq);
+
+	return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_nmi_src *nmi_src = NULL;
+
+	nmi_src = (struct acpi_table_nmi_src*) header;
+
+	if (BAD_MADT_ENTRY(nmi_src, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* TBD: Support nimsrc entries? */
+
+	return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef	CONFIG_ACPI_BUS
+
+/*
+ * acpi_pic_sci_set_trigger()
+ * 
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init
+acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+	unsigned int mask = 1 << irq;
+	unsigned int old, new;
+
+	/* Real old ELCR mask */
+	old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+	/*
+	 * If we use ACPI to set PCI irq's, then we should clear ELCR
+	 * since we will set it correctly as we enable the PCI irq
+	 * routing.
+	 */
+	new = acpi_noirq ? old : 0;
+
+	/*
+	 * Update SCI information in the ELCR, it isn't in the PCI
+	 * routing tables..
+	 */
+	switch (trigger) {
+	case 1:	/* Edge - clear */
+		new &= ~mask;
+		break;
+	case 3: /* Level - set */
+		new |= mask;
+		break;
+	}
+
+	if (old == new)
+		return;
+
+	printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+	outb(new, 0x4d0);
+	outb(new >> 8, 0x4d1);
+}
+
+
+#endif /* CONFIG_ACPI_BUS */
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (use_pci_vector() && !platform_legacy_irq(gsi))
+ 		*irq = IO_APIC_VECTOR(gsi);
+	else
+#endif
+		*irq = gsi;
+	return 0;
+}
+
+unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+{
+	unsigned int irq;
+	unsigned int plat_gsi = gsi;
+
+#ifdef CONFIG_PCI
+	/*
+	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
+	 */
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+		extern void eisa_set_level_irq(unsigned int irq);
+
+		if (edge_level == ACPI_LEVEL_SENSITIVE)
+				eisa_set_level_irq(gsi);
+	}
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
+		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+	}
+#endif
+	acpi_gsi_to_irq(plat_gsi, &irq);
+	return irq;
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+/*
+ *  ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static unsigned long __init
+acpi_scan_rsdp (
+	unsigned long		start,
+	unsigned long		length)
+{
+	unsigned long		offset = 0;
+	unsigned long		sig_len = sizeof("RSD PTR ") - 1;
+
+	/*
+	 * Scan all 16-byte boundaries of the physical memory region for the
+	 * RSDP signature.
+	 */
+	for (offset = 0; offset < length; offset += 16) {
+		if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+			continue;
+		return (start + offset);
+	}
+
+	return 0;
+}
+
+static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_sbf *sb;
+
+	if (!phys_addr || !size)
+	return -EINVAL;
+
+	sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+	if (!sb) {
+		printk(KERN_WARNING PREFIX "Unable to map SBF\n");
+		return -ENODEV;
+	}
+
+	sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+	return 0;
+}
+
+
+#ifdef CONFIG_HPET_TIMER
+
+static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+{
+	struct acpi_table_hpet *hpet_tbl;
+
+	if (!phys || !size)
+		return -EINVAL;
+
+	hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+	if (!hpet_tbl) {
+		printk(KERN_WARNING PREFIX "Unable to map HPET\n");
+		return -ENODEV;
+	}
+
+	if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+		printk(KERN_WARNING PREFIX "HPET timers must be located in "
+		       "memory.\n");
+		return -1;
+	}
+
+#ifdef	CONFIG_X86_64
+        vxtime.hpet_address = hpet_tbl->addr.addrl |
+                ((long) hpet_tbl->addr.addrh << 32);
+
+        printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+               hpet_tbl->id, vxtime.hpet_address);
+#else	/* X86 */
+	{
+		extern unsigned long hpet_address;
+
+		hpet_address = hpet_tbl->addr.addrl;
+		printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+			hpet_tbl->id, hpet_address);
+	}
+#endif	/* X86 */
+
+	return 0;
+}
+#else
+#define	acpi_parse_hpet	NULL
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern u32 pmtmr_ioport;
+#endif
+
+static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+{
+	struct fadt_descriptor_rev2 *fadt = NULL;
+
+	fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
+	if(!fadt) {
+		printk(KERN_WARNING PREFIX "Unable to map FADT\n");
+		return 0;
+	}
+
+#ifdef	CONFIG_ACPI_INTERPRETER
+	/* initialize sci_int early for INT_SRC_OVR MADT parsing */
+	acpi_fadt.sci_int = fadt->sci_int;
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+	/* detect the location of the ACPI PM Timer */
+	if (fadt->revision >= FADT2_REVISION_ID) {
+		/* FADT rev. 2 */
+		if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+			return 0;
+
+		pmtmr_ioport = fadt->xpm_tmr_blk.address;
+	} else {
+		/* FADT rev. 1 */
+		pmtmr_ioport = fadt->V1_pm_tmr_blk;
+	}
+	if (pmtmr_ioport)
+		printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+	return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+	unsigned long		rsdp_phys = 0;
+
+	if (efi_enabled) {
+		if (efi.acpi20)
+			return __pa(efi.acpi20);
+		else if (efi.acpi)
+			return __pa(efi.acpi);
+	}
+	/*
+	 * Scan memory looking for the RSDP signature. First search EBDA (low
+	 * memory) paragraphs and then search upper memory (E0000-FFFFF).
+	 */
+	rsdp_phys = acpi_scan_rsdp (0, 0x400);
+	if (!rsdp_phys)
+		rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+
+	return rsdp_phys;
+}
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_lapic_entries(void)
+{
+	int count;
+
+	/* 
+	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
+	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 */
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+		return count;
+	}
+
+	mp_register_lapic_address(acpi_lapic_addr);
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+				       MAX_APICS);
+	if (!count) { 
+		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+	return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_ioapic_entries(void)
+{
+	int count;
+
+	/*
+	 * ACPI interpreter is required to complete interrupt setup,
+	 * so if it is off, don't enumerate the io-apics with ACPI.
+	 * If MPS is present, it will handle them,
+	 * otherwise the system will stay in PIC mode
+	 */
+	if (acpi_disabled || acpi_noirq) {
+		return -ENODEV;
+        }
+
+	/*
+ 	 * if "noapic" boot option, don't look for IO-APICs
+	 */
+	if (skip_ioapic_setup) {
+		printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+			"due to 'noapic' option.\n");
+		return -ENODEV;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+	if (!count) {
+		printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	/*
+	 * If BIOS did not supply an INT_SRC_OVR for the SCI
+	 * pretend we got one so we can set the SCI flags.
+	 */
+	if (!acpi_sci_override_gsi)
+		acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+
+	/* Fill in identity legacy mapings where no override */
+	mp_config_acpi_legacy_irqs();
+
+	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+	return -1;
+}
+#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+
+
+static void __init
+acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int count, error;
+
+	count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+	if (count >= 1) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = acpi_parse_madt_lapic_entries();
+		if (!error) {
+			acpi_lapic = 1;
+
+			/*
+			 * Parse MADT IO-APIC entries
+			 */
+			error = acpi_parse_madt_ioapic_entries();
+			if (!error) {
+				acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+				acpi_irq_balance_set(NULL);
+				acpi_ioapic = 1;
+
+				smp_found_config = 1;
+				clustered_apic_check();
+			}
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	}
+#endif
+	return;
+}
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ *  called from setup_arch(), always.
+ *	1. checksums all tables
+ *	2. enumerates lapics
+ *	3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ *	acpi_lapic = 1 if LAPIC found
+ *	acpi_ioapic = 1 if IOAPIC found
+ *	if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ *	if acpi_blacklisted() acpi_disabled = 1;
+ *	acpi_irq_model=...
+ *	...
+ *
+ * return value: (currently ignored)
+ *	0: success
+ *	!0: failure
+ */
+
+int __init
+acpi_boot_table_init(void)
+{
+	int error;
+
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	/* 
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	error = acpi_table_init();
+	if (error) {
+		disable_acpi();
+		return error;
+	}
+
+#ifdef __i386__
+	check_acpi_pci();
+#endif
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * blacklist may disable ACPI entirely
+	 */
+	error = acpi_blacklisted();
+	if (error) {
+		extern int acpi_force;
+
+		if (acpi_force) {
+			printk(KERN_WARNING PREFIX "acpi=force override\n");
+		} else {
+			printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+			disable_acpi();
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+
+int __init acpi_boot_init(void)
+{
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * set sci_int and PM timer address
+	 */
+	acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	acpi_process_madt();
+
+	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+
+	return 0;
+}
+