Merge tag 'asoc-fix-v4.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.3

Quite a few fixes here but they're all very small and driver specific,
none of them really stand out if you aren't using the relevant hardware
but they're all useful if you do happen to have an affected device.

1 files changed, 114 insertions, 63 deletions

diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 66d0f49c5bec..8770e619185e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -44,6 +44,7 @@
 #include <asm/pgalloc.h>
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
+#include <asm/maar.h>
 
 /*
  * We have up to 8 empty zeroed pages so we can map one of the right colour
@@ -252,6 +253,119 @@ void __init fixrange_init(unsigned long start, unsigned long end,
 #endif
 }
 
+unsigned __weak platform_maar_init(unsigned num_pairs)
+{
+	struct maar_config cfg[BOOT_MEM_MAP_MAX];
+	unsigned i, num_configured, num_cfg = 0;
+	phys_addr_t skip;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		switch (boot_mem_map.map[i].type) {
+		case BOOT_MEM_RAM:
+		case BOOT_MEM_INIT_RAM:
+			break;
+		default:
+			continue;
+		}
+
+		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
+
+		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
+		cfg[num_cfg].lower += skip;
+
+		cfg[num_cfg].upper = cfg[num_cfg].lower;
+		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
+		cfg[num_cfg].upper -= skip;
+
+		cfg[num_cfg].attrs = MIPS_MAAR_S;
+		num_cfg++;
+	}
+
+	num_configured = maar_config(cfg, num_cfg, num_pairs);
+	if (num_configured < num_cfg)
+		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
+			num_pairs, num_cfg);
+
+	return num_configured;
+}
+
+void maar_init(void)
+{
+	unsigned num_maars, used, i;
+	phys_addr_t lower, upper, attr;
+	static struct {
+		struct maar_config cfgs[3];
+		unsigned used;
+	} recorded = { { { 0 } }, 0 };
+
+	if (!cpu_has_maar)
+		return;
+
+	/* Detect the number of MAARs */
+	write_c0_maari(~0);
+	back_to_back_c0_hazard();
+	num_maars = read_c0_maari() + 1;
+
+	/* MAARs should be in pairs */
+	WARN_ON(num_maars % 2);
+
+	/* Set MAARs using values we recorded already */
+	if (recorded.used) {
+		used = maar_config(recorded.cfgs, recorded.used, num_maars / 2);
+		BUG_ON(used != recorded.used);
+	} else {
+		/* Configure the required MAARs */
+		used = platform_maar_init(num_maars / 2);
+	}
+
+	/* Disable any further MAARs */
+	for (i = (used * 2); i < num_maars; i++) {
+		write_c0_maari(i);
+		back_to_back_c0_hazard();
+		write_c0_maar(0);
+		back_to_back_c0_hazard();
+	}
+
+	if (recorded.used)
+		return;
+
+	pr_info("MAAR configuration:\n");
+	for (i = 0; i < num_maars; i += 2) {
+		write_c0_maari(i);
+		back_to_back_c0_hazard();
+		upper = read_c0_maar();
+
+		write_c0_maari(i + 1);
+		back_to_back_c0_hazard();
+		lower = read_c0_maar();
+
+		attr = lower & upper;
+		lower = (lower & MIPS_MAAR_ADDR) << 4;
+		upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff;
+
+		pr_info("  [%d]: ", i / 2);
+		if (!(attr & MIPS_MAAR_V)) {
+			pr_cont("disabled\n");
+			continue;
+		}
+
+		pr_cont("%pa-%pa", &lower, &upper);
+
+		if (attr & MIPS_MAAR_S)
+			pr_cont(" speculate");
+
+		pr_cont("\n");
+
+		/* Record the setup for use on secondary CPUs */
+		if (used <= ARRAY_SIZE(recorded.cfgs)) {
+			recorded.cfgs[recorded.used].lower = lower;
+			recorded.cfgs[recorded.used].upper = upper;
+			recorded.cfgs[recorded.used].attrs = attr;
+			recorded.used++;
+		}
+	}
+}
+
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int page_is_ram(unsigned long pagenr)
 {
@@ -334,69 +448,6 @@ static inline void mem_init_free_highmem(void)
 #endif
 }
 
-unsigned __weak platform_maar_init(unsigned num_pairs)
-{
-	struct maar_config cfg[BOOT_MEM_MAP_MAX];
-	unsigned i, num_configured, num_cfg = 0;
-	phys_addr_t skip;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		switch (boot_mem_map.map[i].type) {
-		case BOOT_MEM_RAM:
-		case BOOT_MEM_INIT_RAM:
-			break;
-		default:
-			continue;
-		}
-
-		skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff);
-
-		cfg[num_cfg].lower = boot_mem_map.map[i].addr;
-		cfg[num_cfg].lower += skip;
-
-		cfg[num_cfg].upper = cfg[num_cfg].lower;
-		cfg[num_cfg].upper += boot_mem_map.map[i].size - 1;
-		cfg[num_cfg].upper -= skip;
-
-		cfg[num_cfg].attrs = MIPS_MAAR_S;
-		num_cfg++;
-	}
-
-	num_configured = maar_config(cfg, num_cfg, num_pairs);
-	if (num_configured < num_cfg)
-		pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n",
-			num_pairs, num_cfg);
-
-	return num_configured;
-}
-
-static void maar_init(void)
-{
-	unsigned num_maars, used, i;
-
-	if (!cpu_has_maar)
-		return;
-
-	/* Detect the number of MAARs */
-	write_c0_maari(~0);
-	back_to_back_c0_hazard();
-	num_maars = read_c0_maari() + 1;
-
-	/* MAARs should be in pairs */
-	WARN_ON(num_maars % 2);
-
-	/* Configure the required MAARs */
-	used = platform_maar_init(num_maars / 2);
-
-	/* Disable any further MAARs */
-	for (i = (used * 2); i < num_maars; i++) {
-		write_c0_maari(i);
-		back_to_back_c0_hazard();
-		write_c0_maar(0);
-		back_to_back_c0_hazard();
-	}
-}
-
 void __init mem_init(void)
 {
 #ifdef CONFIG_HIGHMEM