x86/asm/entry: Move entry_64.S and entry_32.S to arch/x86/entry/

Create a new directory hierarchy for the low level x86 entry code:

    arch/x86/entry/*

This will host all the low level glue that is currently scattered
all across arch/x86/.

Start with entry_64.S and entry_32.S.

Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 0 insertions, 1442 deletions

diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
deleted file mode 100644
index 4ad79e946f5a..000000000000
--- a/arch/x86/kernel/entry_64.S
+++ /dev/null
@@ -1,1442 +0,0 @@
-/*
- *  linux/arch/x86_64/entry.S
- *
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 2000, 2001, 2002  Andi Kleen SuSE Labs
- *  Copyright (C) 2000  Pavel Machek <pavel@suse.cz>
- */
-
-/*
- * entry.S contains the system-call and fault low-level handling routines.
- *
- * Some of this is documented in Documentation/x86/entry_64.txt
- *
- * NOTE: This code handles signal-recognition, which happens every time
- * after an interrupt and after each system call.
- *
- * A note on terminology:
- * - iret frame: Architecture defined interrupt frame from SS to RIP
- * at the top of the kernel process stack.
- *
- * Some macro usage:
- * - ENTRY/END Define functions in the symbol table.
- * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
- * - idtentry - Define exception entry points.
- */
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/calling.h>
-#include <asm/asm-offsets.h>
-#include <asm/msr.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/hw_irq.h>
-#include <asm/page_types.h>
-#include <asm/irqflags.h>
-#include <asm/paravirt.h>
-#include <asm/percpu.h>
-#include <asm/asm.h>
-#include <asm/context_tracking.h>
-#include <asm/smap.h>
-#include <asm/pgtable_types.h>
-#include <linux/err.h>
-
-/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
-#include <linux/elf-em.h>
-#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
-#define __AUDIT_ARCH_64BIT 0x80000000
-#define __AUDIT_ARCH_LE	   0x40000000
-
-	.code64
-	.section .entry.text, "ax"
-
-
-#ifdef CONFIG_PARAVIRT
-ENTRY(native_usergs_sysret64)
-	swapgs
-	sysretq
-ENDPROC(native_usergs_sysret64)
-#endif /* CONFIG_PARAVIRT */
-
-
-.macro TRACE_IRQS_IRETQ
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bt   $9,EFLAGS(%rsp)	/* interrupts off? */
-	jnc  1f
-	TRACE_IRQS_ON
-1:
-#endif
-.endm
-
-/*
- * When dynamic function tracer is enabled it will add a breakpoint
- * to all locations that it is about to modify, sync CPUs, update
- * all the code, sync CPUs, then remove the breakpoints. In this time
- * if lockdep is enabled, it might jump back into the debug handler
- * outside the updating of the IST protection. (TRACE_IRQS_ON/OFF).
- *
- * We need to change the IDT table before calling TRACE_IRQS_ON/OFF to
- * make sure the stack pointer does not get reset back to the top
- * of the debug stack, and instead just reuses the current stack.
- */
-#if defined(CONFIG_DYNAMIC_FTRACE) && defined(CONFIG_TRACE_IRQFLAGS)
-
-.macro TRACE_IRQS_OFF_DEBUG
-	call debug_stack_set_zero
-	TRACE_IRQS_OFF
-	call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_ON_DEBUG
-	call debug_stack_set_zero
-	TRACE_IRQS_ON
-	call debug_stack_reset
-.endm
-
-.macro TRACE_IRQS_IRETQ_DEBUG
-	bt   $9,EFLAGS(%rsp)	/* interrupts off? */
-	jnc  1f
-	TRACE_IRQS_ON_DEBUG
-1:
-.endm
-
-#else
-# define TRACE_IRQS_OFF_DEBUG		TRACE_IRQS_OFF
-# define TRACE_IRQS_ON_DEBUG		TRACE_IRQS_ON
-# define TRACE_IRQS_IRETQ_DEBUG		TRACE_IRQS_IRETQ
-#endif
-
-/*
- * 64bit SYSCALL instruction entry. Up to 6 arguments in registers.
- *
- * 64bit SYSCALL saves rip to rcx, clears rflags.RF, then saves rflags to r11,
- * then loads new ss, cs, and rip from previously programmed MSRs.
- * rflags gets masked by a value from another MSR (so CLD and CLAC
- * are not needed). SYSCALL does not save anything on the stack
- * and does not change rsp.
- *
- * Registers on entry:
- * rax  system call number
- * rcx  return address
- * r11  saved rflags (note: r11 is callee-clobbered register in C ABI)
- * rdi  arg0
- * rsi  arg1
- * rdx  arg2
- * r10  arg3 (needs to be moved to rcx to conform to C ABI)
- * r8   arg4
- * r9   arg5
- * (note: r12-r15,rbp,rbx are callee-preserved in C ABI)
- *
- * Only called from user space.
- *
- * When user can change pt_regs->foo always force IRET. That is because
- * it deals with uncanonical addresses better. SYSRET has trouble
- * with them due to bugs in both AMD and Intel CPUs.
- */
-
-ENTRY(system_call)
-	/*
-	 * Interrupts are off on entry.
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	SWAPGS_UNSAFE_STACK
-	/*
-	 * A hypervisor implementation might want to use a label
-	 * after the swapgs, so that it can do the swapgs
-	 * for the guest and jump here on syscall.
-	 */
-GLOBAL(system_call_after_swapgs)
-
-	movq	%rsp,PER_CPU_VAR(rsp_scratch)
-	movq	PER_CPU_VAR(cpu_current_top_of_stack),%rsp
-
-	/* Construct struct pt_regs on stack */
-	pushq $__USER_DS			/* pt_regs->ss */
-	pushq PER_CPU_VAR(rsp_scratch)	/* pt_regs->sp */
-	/*
-	 * Re-enable interrupts.
-	 * We use 'rsp_scratch' as a scratch space, hence irq-off block above
-	 * must execute atomically in the face of possible interrupt-driven
-	 * task preemption. We must enable interrupts only after we're done
-	 * with using rsp_scratch:
-	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq	%r11			/* pt_regs->flags */
-	pushq	$__USER_CS		/* pt_regs->cs */
-	pushq	%rcx			/* pt_regs->ip */
-	pushq	%rax			/* pt_regs->orig_ax */
-	pushq	%rdi			/* pt_regs->di */
-	pushq	%rsi			/* pt_regs->si */
-	pushq	%rdx			/* pt_regs->dx */
-	pushq	%rcx			/* pt_regs->cx */
-	pushq	$-ENOSYS		/* pt_regs->ax */
-	pushq	%r8			/* pt_regs->r8 */
-	pushq	%r9			/* pt_regs->r9 */
-	pushq	%r10			/* pt_regs->r10 */
-	pushq	%r11			/* pt_regs->r11 */
-	sub	$(6*8),%rsp /* pt_regs->bp,bx,r12-15 not saved */
-
-	testl $_TIF_WORK_SYSCALL_ENTRY, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz tracesys
-system_call_fastpath:
-#if __SYSCALL_MASK == ~0
-	cmpq $__NR_syscall_max,%rax
-#else
-	andl $__SYSCALL_MASK,%eax
-	cmpl $__NR_syscall_max,%eax
-#endif
-	ja	1f	/* return -ENOSYS (already in pt_regs->ax) */
-	movq %r10,%rcx
-	call *sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-1:
-/*
- * Syscall return path ending with SYSRET (fast path).
- * Has incompletely filled pt_regs.
- */
-	LOCKDEP_SYS_EXIT
-	/*
-	 * We do not frame this tiny irq-off block with TRACE_IRQS_OFF/ON,
-	 * it is too small to ever cause noticeable irq latency.
-	 */
-	DISABLE_INTERRUPTS(CLBR_NONE)
-
-	/*
-	 * We must check ti flags with interrupts (or at least preemption)
-	 * off because we must *never* return to userspace without
-	 * processing exit work that is enqueued if we're preempted here.
-	 * In particular, returning to userspace with any of the one-shot
-	 * flags (TIF_NOTIFY_RESUME, TIF_USER_RETURN_NOTIFY, etc) set is
-	 * very bad.
-	 */
-	testl $_TIF_ALLWORK_MASK, ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS)
-	jnz int_ret_from_sys_call_irqs_off	/* Go to the slow path */
-
-	RESTORE_C_REGS_EXCEPT_RCX_R11
-	movq	RIP(%rsp),%rcx
-	movq	EFLAGS(%rsp),%r11
-	movq	RSP(%rsp),%rsp
-	/*
-	 * 64bit SYSRET restores rip from rcx,
-	 * rflags from r11 (but RF and VM bits are forced to 0),
-	 * cs and ss are loaded from MSRs.
-	 * Restoration of rflags re-enables interrupts.
-	 *
-	 * NB: On AMD CPUs with the X86_BUG_SYSRET_SS_ATTRS bug, the ss
-	 * descriptor is not reinitialized.  This means that we should
-	 * avoid SYSRET with SS == NULL, which could happen if we schedule,
-	 * exit the kernel, and re-enter using an interrupt vector.  (All
-	 * interrupt entries on x86_64 set SS to NULL.)  We prevent that
-	 * from happening by reloading SS in __switch_to.  (Actually
-	 * detecting the failure in 64-bit userspace is tricky but can be
-	 * done.)
-	 */
-	USERGS_SYSRET64
-
-	/* Do syscall entry tracing */
-tracesys:
-	movq %rsp, %rdi
-	movl $AUDIT_ARCH_X86_64, %esi
-	call syscall_trace_enter_phase1
-	test %rax, %rax
-	jnz tracesys_phase2		/* if needed, run the slow path */
-	RESTORE_C_REGS_EXCEPT_RAX	/* else restore clobbered regs */
-	movq ORIG_RAX(%rsp), %rax
-	jmp system_call_fastpath	/*      and return to the fast path */
-
-tracesys_phase2:
-	SAVE_EXTRA_REGS
-	movq %rsp, %rdi
-	movl $AUDIT_ARCH_X86_64, %esi
-	movq %rax,%rdx
-	call syscall_trace_enter_phase2
-
-	/*
-	 * Reload registers from stack in case ptrace changed them.
-	 * We don't reload %rax because syscall_trace_entry_phase2() returned
-	 * the value it wants us to use in the table lookup.
-	 */
-	RESTORE_C_REGS_EXCEPT_RAX
-	RESTORE_EXTRA_REGS
-#if __SYSCALL_MASK == ~0
-	cmpq $__NR_syscall_max,%rax
-#else
-	andl $__SYSCALL_MASK,%eax
-	cmpl $__NR_syscall_max,%eax
-#endif
-	ja	1f	/* return -ENOSYS (already in pt_regs->ax) */
-	movq %r10,%rcx	/* fixup for C */
-	call *sys_call_table(,%rax,8)
-	movq %rax,RAX(%rsp)
-1:
-	/* Use IRET because user could have changed pt_regs->foo */
-
-/*
- * Syscall return path ending with IRET.
- * Has correct iret frame.
- */
-GLOBAL(int_ret_from_sys_call)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-int_ret_from_sys_call_irqs_off: /* jumps come here from the irqs-off SYSRET path */
-	TRACE_IRQS_OFF
-	movl $_TIF_ALLWORK_MASK,%edi
-	/* edi:	mask to check */
-GLOBAL(int_with_check)
-	LOCKDEP_SYS_EXIT_IRQ
-	GET_THREAD_INFO(%rcx)
-	movl TI_flags(%rcx),%edx
-	andl %edi,%edx
-	jnz   int_careful
-	andl	$~TS_COMPAT,TI_status(%rcx)
-	jmp	syscall_return
-
-	/* Either reschedule or signal or syscall exit tracking needed. */
-	/* First do a reschedule test. */
-	/* edx:	work, edi: workmask */
-int_careful:
-	bt $TIF_NEED_RESCHED,%edx
-	jnc  int_very_careful
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq %rdi
-	SCHEDULE_USER
-	popq %rdi
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp int_with_check
-
-	/* handle signals and tracing -- both require a full pt_regs */
-int_very_careful:
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	SAVE_EXTRA_REGS
-	/* Check for syscall exit trace */
-	testl $_TIF_WORK_SYSCALL_EXIT,%edx
-	jz int_signal
-	pushq %rdi
-	leaq 8(%rsp),%rdi	# &ptregs -> arg1
-	call syscall_trace_leave
-	popq %rdi
-	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
-	jmp int_restore_rest
-
-int_signal:
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz 1f
-	movq %rsp,%rdi		# &ptregs -> arg1
-	xorl %esi,%esi		# oldset -> arg2
-	call do_notify_resume
-1:	movl $_TIF_WORK_MASK,%edi
-int_restore_rest:
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp int_with_check
-
-syscall_return:
-	/* The IRETQ could re-enable interrupts: */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_IRETQ
-
-	/*
-	 * Try to use SYSRET instead of IRET if we're returning to
-	 * a completely clean 64-bit userspace context.
-	 */
-	movq RCX(%rsp),%rcx
-	movq RIP(%rsp),%r11
-	cmpq %rcx,%r11			/* RCX == RIP */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * On Intel CPUs, SYSRET with non-canonical RCX/RIP will #GP
-	 * in kernel space.  This essentially lets the user take over
-	 * the kernel, since userspace controls RSP.
-	 *
-	 * If width of "canonical tail" ever becomes variable, this will need
-	 * to be updated to remain correct on both old and new CPUs.
-	 */
-	.ifne __VIRTUAL_MASK_SHIFT - 47
-	.error "virtual address width changed -- SYSRET checks need update"
-	.endif
-	/* Change top 16 bits to be the sign-extension of 47th bit */
-	shl	$(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
-	sar	$(64 - (__VIRTUAL_MASK_SHIFT+1)), %rcx
-	/* If this changed %rcx, it was not canonical */
-	cmpq	%rcx, %r11
-	jne	opportunistic_sysret_failed
-
-	cmpq $__USER_CS,CS(%rsp)	/* CS must match SYSRET */
-	jne opportunistic_sysret_failed
-
-	movq R11(%rsp),%r11
-	cmpq %r11,EFLAGS(%rsp)		/* R11 == RFLAGS */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * SYSRET can't restore RF.  SYSRET can restore TF, but unlike IRET,
-	 * restoring TF results in a trap from userspace immediately after
-	 * SYSRET.  This would cause an infinite loop whenever #DB happens
-	 * with register state that satisfies the opportunistic SYSRET
-	 * conditions.  For example, single-stepping this user code:
-	 *
-	 *           movq $stuck_here,%rcx
-	 *           pushfq
-	 *           popq %r11
-	 *   stuck_here:
-	 *
-	 * would never get past 'stuck_here'.
-	 */
-	testq $(X86_EFLAGS_RF|X86_EFLAGS_TF), %r11
-	jnz opportunistic_sysret_failed
-
-	/* nothing to check for RSP */
-
-	cmpq $__USER_DS,SS(%rsp)	/* SS must match SYSRET */
-	jne opportunistic_sysret_failed
-
-	/*
-	 * We win!  This label is here just for ease of understanding
-	 * perf profiles.  Nothing jumps here.
-	 */
-syscall_return_via_sysret:
-	/* rcx and r11 are already restored (see code above) */
-	RESTORE_C_REGS_EXCEPT_RCX_R11
-	movq RSP(%rsp),%rsp
-	USERGS_SYSRET64
-
-opportunistic_sysret_failed:
-	SWAPGS
-	jmp	restore_c_regs_and_iret
-END(system_call)
-
-
-	.macro FORK_LIKE func
-ENTRY(stub_\func)
-	SAVE_EXTRA_REGS 8
-	jmp sys_\func
-END(stub_\func)
-	.endm
-
-	FORK_LIKE  clone
-	FORK_LIKE  fork
-	FORK_LIKE  vfork
-
-ENTRY(stub_execve)
-	call	sys_execve
-return_from_execve:
-	testl	%eax, %eax
-	jz	1f
-	/* exec failed, can use fast SYSRET code path in this case */
-	ret
-1:
-	/* must use IRET code path (pt_regs->cs may have changed) */
-	addq	$8, %rsp
-	ZERO_EXTRA_REGS
-	movq	%rax,RAX(%rsp)
-	jmp	int_ret_from_sys_call
-END(stub_execve)
-/*
- * Remaining execve stubs are only 7 bytes long.
- * ENTRY() often aligns to 16 bytes, which in this case has no benefits.
- */
-	.align	8
-GLOBAL(stub_execveat)
-	call	sys_execveat
-	jmp	return_from_execve
-END(stub_execveat)
-
-#if defined(CONFIG_X86_X32_ABI) || defined(CONFIG_IA32_EMULATION)
-	.align	8
-GLOBAL(stub_x32_execve)
-GLOBAL(stub32_execve)
-	call	compat_sys_execve
-	jmp	return_from_execve
-END(stub32_execve)
-END(stub_x32_execve)
-	.align	8
-GLOBAL(stub_x32_execveat)
-GLOBAL(stub32_execveat)
-	call	compat_sys_execveat
-	jmp	return_from_execve
-END(stub32_execveat)
-END(stub_x32_execveat)
-#endif
-
-/*
- * sigreturn is special because it needs to restore all registers on return.
- * This cannot be done with SYSRET, so use the IRET return path instead.
- */
-ENTRY(stub_rt_sigreturn)
-	/*
-	 * SAVE_EXTRA_REGS result is not normally needed:
-	 * sigreturn overwrites all pt_regs->GPREGS.
-	 * But sigreturn can fail (!), and there is no easy way to detect that.
-	 * To make sure RESTORE_EXTRA_REGS doesn't restore garbage on error,
-	 * we SAVE_EXTRA_REGS here.
-	 */
-	SAVE_EXTRA_REGS 8
-	call sys_rt_sigreturn
-return_from_stub:
-	addq	$8, %rsp
-	RESTORE_EXTRA_REGS
-	movq %rax,RAX(%rsp)
-	jmp int_ret_from_sys_call
-END(stub_rt_sigreturn)
-
-#ifdef CONFIG_X86_X32_ABI
-ENTRY(stub_x32_rt_sigreturn)
-	SAVE_EXTRA_REGS 8
-	call sys32_x32_rt_sigreturn
-	jmp  return_from_stub
-END(stub_x32_rt_sigreturn)
-#endif
-
-/*
- * A newly forked process directly context switches into this address.
- *
- * rdi: prev task we switched from
- */
-ENTRY(ret_from_fork)
-
-	LOCK ; btr $TIF_FORK,TI_flags(%r8)
-
-	pushq $0x0002
-	popfq				# reset kernel eflags
-
-	call schedule_tail			# rdi: 'prev' task parameter
-
-	RESTORE_EXTRA_REGS
-
-	testb	$3, CS(%rsp)			# from kernel_thread?
-
-	/*
-	 * By the time we get here, we have no idea whether our pt_regs,
-	 * ti flags, and ti status came from the 64-bit SYSCALL fast path,
-	 * the slow path, or one of the ia32entry paths.
-	 * Use IRET code path to return, since it can safely handle
-	 * all of the above.
-	 */
-	jnz	int_ret_from_sys_call
-
-	/* We came from kernel_thread */
-	/* nb: we depend on RESTORE_EXTRA_REGS above */
-	movq %rbp, %rdi
-	call *%rbx
-	movl $0, RAX(%rsp)
-	RESTORE_EXTRA_REGS
-	jmp int_ret_from_sys_call
-END(ret_from_fork)
-
-/*
- * Build the entry stubs with some assembler magic.
- * We pack 1 stub into every 8-byte block.
- */
-	.align 8
-ENTRY(irq_entries_start)
-    vector=FIRST_EXTERNAL_VECTOR
-    .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
-	pushq $(~vector+0x80)	/* Note: always in signed byte range */
-    vector=vector+1
-	jmp	common_interrupt
-	.align	8
-    .endr
-END(irq_entries_start)
-
-/*
- * Interrupt entry/exit.
- *
- * Interrupt entry points save only callee clobbered registers in fast path.
- *
- * Entry runs with interrupts off.
- */
-
-/* 0(%rsp): ~(interrupt number) */
-	.macro interrupt func
-	cld
-	/*
-	 * Since nothing in interrupt handling code touches r12...r15 members
-	 * of "struct pt_regs", and since interrupts can nest, we can save
-	 * four stack slots and simultaneously provide
-	 * an unwind-friendly stack layout by saving "truncated" pt_regs
-	 * exactly up to rbp slot, without these members.
-	 */
-	ALLOC_PT_GPREGS_ON_STACK -RBP
-	SAVE_C_REGS -RBP
-	/* this goes to 0(%rsp) for unwinder, not for saving the value: */
-	SAVE_EXTRA_REGS_RBP -RBP
-
-	leaq -RBP(%rsp),%rdi	/* arg1 for \func (pointer to pt_regs) */
-
-	testb	$3, CS-RBP(%rsp)
-	jz	1f
-	SWAPGS
-1:
-	/*
-	 * Save previous stack pointer, optionally switch to interrupt stack.
-	 * irq_count is used to check if a CPU is already on an interrupt stack
-	 * or not. While this is essentially redundant with preempt_count it is
-	 * a little cheaper to use a separate counter in the PDA (short of
-	 * moving irq_enter into assembly, which would be too much work)
-	 */
-	movq %rsp, %rsi
-	incl PER_CPU_VAR(irq_count)
-	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	pushq %rsi
-	/* We entered an interrupt context - irqs are off: */
-	TRACE_IRQS_OFF
-
-	call \func
-	.endm
-
-	/*
-	 * The interrupt stubs push (~vector+0x80) onto the stack and
-	 * then jump to common_interrupt.
-	 */
-	.p2align CONFIG_X86_L1_CACHE_SHIFT
-common_interrupt:
-	ASM_CLAC
-	addq $-0x80,(%rsp)		/* Adjust vector to [-256,-1] range */
-	interrupt do_IRQ
-	/* 0(%rsp): old RSP */
-ret_from_intr:
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	decl PER_CPU_VAR(irq_count)
-
-	/* Restore saved previous stack */
-	popq %rsi
-	/* return code expects complete pt_regs - adjust rsp accordingly: */
-	leaq -RBP(%rsi),%rsp
-
-	testb	$3, CS(%rsp)
-	jz	retint_kernel
-	/* Interrupt came from user space */
-retint_user:
-	GET_THREAD_INFO(%rcx)
-	/*
-	 * %rcx: thread info. Interrupts off.
-	 */
-retint_with_reschedule:
-	movl $_TIF_WORK_MASK,%edi
-retint_check:
-	LOCKDEP_SYS_EXIT_IRQ
-	movl TI_flags(%rcx),%edx
-	andl %edi,%edx
-	jnz  retint_careful
-
-retint_swapgs:		/* return to user-space */
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	DISABLE_INTERRUPTS(CLBR_ANY)
-	TRACE_IRQS_IRETQ
-
-	SWAPGS
-	jmp	restore_c_regs_and_iret
-
-/* Returning to kernel space */
-retint_kernel:
-#ifdef CONFIG_PREEMPT
-	/* Interrupts are off */
-	/* Check if we need preemption */
-	bt	$9,EFLAGS(%rsp)	/* interrupts were off? */
-	jnc	1f
-0:	cmpl	$0,PER_CPU_VAR(__preempt_count)
-	jnz	1f
-	call	preempt_schedule_irq
-	jmp	0b
-1:
-#endif
-	/*
-	 * The iretq could re-enable interrupts:
-	 */
-	TRACE_IRQS_IRETQ
-
-/*
- * At this label, code paths which return to kernel and to user,
- * which come from interrupts/exception and from syscalls, merge.
- */
-restore_c_regs_and_iret:
-	RESTORE_C_REGS
-	REMOVE_PT_GPREGS_FROM_STACK 8
-
-irq_return:
-	INTERRUPT_RETURN
-
-ENTRY(native_iret)
-	/*
-	 * Are we returning to a stack segment from the LDT?  Note: in
-	 * 64-bit mode SS:RSP on the exception stack is always valid.
-	 */
-#ifdef CONFIG_X86_ESPFIX64
-	testb $4,(SS-RIP)(%rsp)
-	jnz native_irq_return_ldt
-#endif
-
-.global native_irq_return_iret
-native_irq_return_iret:
-	/*
-	 * This may fault.  Non-paranoid faults on return to userspace are
-	 * handled by fixup_bad_iret.  These include #SS, #GP, and #NP.
-	 * Double-faults due to espfix64 are handled in do_double_fault.
-	 * Other faults here are fatal.
-	 */
-	iretq
-
-#ifdef CONFIG_X86_ESPFIX64
-native_irq_return_ldt:
-	pushq %rax
-	pushq %rdi
-	SWAPGS
-	movq PER_CPU_VAR(espfix_waddr),%rdi
-	movq %rax,(0*8)(%rdi)	/* RAX */
-	movq (2*8)(%rsp),%rax	/* RIP */
-	movq %rax,(1*8)(%rdi)
-	movq (3*8)(%rsp),%rax	/* CS */
-	movq %rax,(2*8)(%rdi)
-	movq (4*8)(%rsp),%rax	/* RFLAGS */
-	movq %rax,(3*8)(%rdi)
-	movq (6*8)(%rsp),%rax	/* SS */
-	movq %rax,(5*8)(%rdi)
-	movq (5*8)(%rsp),%rax	/* RSP */
-	movq %rax,(4*8)(%rdi)
-	andl $0xffff0000,%eax
-	popq %rdi
-	orq PER_CPU_VAR(espfix_stack),%rax
-	SWAPGS
-	movq %rax,%rsp
-	popq %rax
-	jmp native_irq_return_iret
-#endif
-
-	/* edi: workmask, edx: work */
-retint_careful:
-	bt    $TIF_NEED_RESCHED,%edx
-	jnc   retint_signal
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	pushq %rdi
-	SCHEDULE_USER
-	popq %rdi
-	GET_THREAD_INFO(%rcx)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	jmp retint_check
-
-retint_signal:
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    retint_swapgs
-	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_NONE)
-	SAVE_EXTRA_REGS
-	movq $-1,ORIG_RAX(%rsp)
-	xorl %esi,%esi		# oldset
-	movq %rsp,%rdi		# &pt_regs
-	call do_notify_resume
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	GET_THREAD_INFO(%rcx)
-	jmp retint_with_reschedule
-
-END(common_interrupt)
-
-/*
- * APIC interrupts.
- */
-.macro apicinterrupt3 num sym do_sym
-ENTRY(\sym)
-	ASM_CLAC
-	pushq $~(\num)
-.Lcommon_\sym:
-	interrupt \do_sym
-	jmp ret_from_intr
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-#define trace(sym) trace_##sym
-#define smp_trace(sym) smp_trace_##sym
-
-.macro trace_apicinterrupt num sym
-apicinterrupt3 \num trace(\sym) smp_trace(\sym)
-.endm
-#else
-.macro trace_apicinterrupt num sym do_sym
-.endm
-#endif
-
-.macro apicinterrupt num sym do_sym
-apicinterrupt3 \num \sym \do_sym
-trace_apicinterrupt \num \sym
-.endm
-
-#ifdef CONFIG_SMP
-apicinterrupt3 IRQ_MOVE_CLEANUP_VECTOR \
-	irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt
-apicinterrupt3 REBOOT_VECTOR \
-	reboot_interrupt smp_reboot_interrupt
-#endif
-
-#ifdef CONFIG_X86_UV
-apicinterrupt3 UV_BAU_MESSAGE \
-	uv_bau_message_intr1 uv_bau_message_interrupt
-#endif
-apicinterrupt LOCAL_TIMER_VECTOR \
-	apic_timer_interrupt smp_apic_timer_interrupt
-apicinterrupt X86_PLATFORM_IPI_VECTOR \
-	x86_platform_ipi smp_x86_platform_ipi
-
-#ifdef CONFIG_HAVE_KVM
-apicinterrupt3 POSTED_INTR_VECTOR \
-	kvm_posted_intr_ipi smp_kvm_posted_intr_ipi
-#endif
-
-#ifdef CONFIG_X86_MCE_THRESHOLD
-apicinterrupt THRESHOLD_APIC_VECTOR \
-	threshold_interrupt smp_threshold_interrupt
-#endif
-
-#ifdef CONFIG_X86_THERMAL_VECTOR
-apicinterrupt THERMAL_APIC_VECTOR \
-	thermal_interrupt smp_thermal_interrupt
-#endif
-
-#ifdef CONFIG_SMP
-apicinterrupt CALL_FUNCTION_SINGLE_VECTOR \
-	call_function_single_interrupt smp_call_function_single_interrupt
-apicinterrupt CALL_FUNCTION_VECTOR \
-	call_function_interrupt smp_call_function_interrupt
-apicinterrupt RESCHEDULE_VECTOR \
-	reschedule_interrupt smp_reschedule_interrupt
-#endif
-
-apicinterrupt ERROR_APIC_VECTOR \
-	error_interrupt smp_error_interrupt
-apicinterrupt SPURIOUS_APIC_VECTOR \
-	spurious_interrupt smp_spurious_interrupt
-
-#ifdef CONFIG_IRQ_WORK
-apicinterrupt IRQ_WORK_VECTOR \
-	irq_work_interrupt smp_irq_work_interrupt
-#endif
-
-/*
- * Exception entry points.
- */
-#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
-
-.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
-ENTRY(\sym)
-	/* Sanity check */
-	.if \shift_ist != -1 && \paranoid == 0
-	.error "using shift_ist requires paranoid=1"
-	.endif
-
-	ASM_CLAC
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-
-	.ifeq \has_error_code
-	pushq $-1			/* ORIG_RAX: no syscall to restart */
-	.endif
-
-	ALLOC_PT_GPREGS_ON_STACK
-
-	.if \paranoid
-	.if \paranoid == 1
-	testb	$3, CS(%rsp)		/* If coming from userspace, switch */
-	jnz 1f				/* stacks. */
-	.endif
-	call paranoid_entry
-	.else
-	call error_entry
-	.endif
-	/* returned flag: ebx=0: need swapgs on exit, ebx=1: don't need it */
-
-	.if \paranoid
-	.if \shift_ist != -1
-	TRACE_IRQS_OFF_DEBUG		/* reload IDT in case of recursion */
-	.else
-	TRACE_IRQS_OFF
-	.endif
-	.endif
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-
-	.if \has_error_code
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */
-	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
-	.else
-	xorl %esi,%esi			/* no error code */
-	.endif
-
-	.if \shift_ist != -1
-	subq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
-	.endif
-
-	call \do_sym
-
-	.if \shift_ist != -1
-	addq $EXCEPTION_STKSZ, CPU_TSS_IST(\shift_ist)
-	.endif
-
-	/* these procedures expect "no swapgs" flag in ebx */
-	.if \paranoid
-	jmp paranoid_exit
-	.else
-	jmp error_exit
-	.endif
-
-	.if \paranoid == 1
-	/*
-	 * Paranoid entry from userspace.  Switch stacks and treat it
-	 * as a normal entry.  This means that paranoid handlers
-	 * run in real process context if user_mode(regs).
-	 */
-1:
-	call error_entry
-
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-	call sync_regs
-	movq %rax,%rsp			/* switch stack */
-
-	movq %rsp,%rdi			/* pt_regs pointer */
-
-	.if \has_error_code
-	movq ORIG_RAX(%rsp),%rsi	/* get error code */
-	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
-	.else
-	xorl %esi,%esi			/* no error code */
-	.endif
-
-	call \do_sym
-
-	jmp error_exit			/* %ebx: no swapgs flag */
-	.endif
-END(\sym)
-.endm
-
-#ifdef CONFIG_TRACING
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#else
-.macro trace_idtentry sym do_sym has_error_code:req
-idtentry \sym \do_sym has_error_code=\has_error_code
-.endm
-#endif
-
-idtentry divide_error do_divide_error has_error_code=0
-idtentry overflow do_overflow has_error_code=0
-idtentry bounds do_bounds has_error_code=0
-idtentry invalid_op do_invalid_op has_error_code=0
-idtentry device_not_available do_device_not_available has_error_code=0
-idtentry double_fault do_double_fault has_error_code=1 paranoid=2
-idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
-idtentry invalid_TSS do_invalid_TSS has_error_code=1
-idtentry segment_not_present do_segment_not_present has_error_code=1
-idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0
-idtentry coprocessor_error do_coprocessor_error has_error_code=0
-idtentry alignment_check do_alignment_check has_error_code=1
-idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0
-
-
-	/* Reload gs selector with exception handling */
-	/* edi:  new selector */
-ENTRY(native_load_gs_index)
-	pushfq
-	DISABLE_INTERRUPTS(CLBR_ANY & ~CLBR_RDI)
-	SWAPGS
-gs_change:
-	movl %edi,%gs
-2:	mfence		/* workaround */
-	SWAPGS
-	popfq
-	ret
-END(native_load_gs_index)
-
-	_ASM_EXTABLE(gs_change,bad_gs)
-	.section .fixup,"ax"
-	/* running with kernelgs */
-bad_gs:
-	SWAPGS			/* switch back to user gs */
-	xorl %eax,%eax
-	movl %eax,%gs
-	jmp  2b
-	.previous
-
-/* Call softirq on interrupt stack. Interrupts are off. */
-ENTRY(do_softirq_own_stack)
-	pushq %rbp
-	mov  %rsp,%rbp
-	incl PER_CPU_VAR(irq_count)
-	cmove PER_CPU_VAR(irq_stack_ptr),%rsp
-	push  %rbp			# backlink for old unwinder
-	call __do_softirq
-	leaveq
-	decl PER_CPU_VAR(irq_count)
-	ret
-END(do_softirq_own_stack)
-
-#ifdef CONFIG_XEN
-idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0
-
-/*
- * A note on the "critical region" in our callback handler.
- * We want to avoid stacking callback handlers due to events occurring
- * during handling of the last event. To do this, we keep events disabled
- * until we've done all processing. HOWEVER, we must enable events before
- * popping the stack frame (can't be done atomically) and so it would still
- * be possible to get enough handler activations to overflow the stack.
- * Although unlikely, bugs of that kind are hard to track down, so we'd
- * like to avoid the possibility.
- * So, on entry to the handler we detect whether we interrupted an
- * existing activation in its critical region -- if so, we pop the current
- * activation and restart the handler using the previous one.
- */
-ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
-/*
- * Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
- * see the correct pointer to the pt_regs
- */
-	movq %rdi, %rsp            # we don't return, adjust the stack frame
-11:	incl PER_CPU_VAR(irq_count)
-	movq %rsp,%rbp
-	cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp
-	pushq %rbp			# backlink for old unwinder
-	call xen_evtchn_do_upcall
-	popq %rsp
-	decl PER_CPU_VAR(irq_count)
-#ifndef CONFIG_PREEMPT
-	call xen_maybe_preempt_hcall
-#endif
-	jmp  error_exit
-END(xen_do_hypervisor_callback)
-
-/*
- * Hypervisor uses this for application faults while it executes.
- * We get here for two reasons:
- *  1. Fault while reloading DS, ES, FS or GS
- *  2. Fault while executing IRET
- * Category 1 we do not need to fix up as Xen has already reloaded all segment
- * registers that could be reloaded and zeroed the others.
- * Category 2 we fix up by killing the current process. We cannot use the
- * normal Linux return path in this case because if we use the IRET hypercall
- * to pop the stack frame we end up in an infinite loop of failsafe callbacks.
- * We distinguish between categories by comparing each saved segment register
- * with its current contents: any discrepancy means we in category 1.
- */
-ENTRY(xen_failsafe_callback)
-	movl %ds,%ecx
-	cmpw %cx,0x10(%rsp)
-	jne 1f
-	movl %es,%ecx
-	cmpw %cx,0x18(%rsp)
-	jne 1f
-	movl %fs,%ecx
-	cmpw %cx,0x20(%rsp)
-	jne 1f
-	movl %gs,%ecx
-	cmpw %cx,0x28(%rsp)
-	jne 1f
-	/* All segments match their saved values => Category 2 (Bad IRET). */
-	movq (%rsp),%rcx
-	movq 8(%rsp),%r11
-	addq $0x30,%rsp
-	pushq $0	/* RIP */
-	pushq %r11
-	pushq %rcx
-	jmp general_protection
-1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
-	movq (%rsp),%rcx
-	movq 8(%rsp),%r11
-	addq $0x30,%rsp
-	pushq $-1 /* orig_ax = -1 => not a system call */
-	ALLOC_PT_GPREGS_ON_STACK
-	SAVE_C_REGS
-	SAVE_EXTRA_REGS
-	jmp error_exit
-END(xen_failsafe_callback)
-
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
-	xen_hvm_callback_vector xen_evtchn_do_upcall
-
-#endif /* CONFIG_XEN */
-
-#if IS_ENABLED(CONFIG_HYPERV)
-apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
-	hyperv_callback_vector hyperv_vector_handler
-#endif /* CONFIG_HYPERV */
-
-idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry stack_segment do_stack_segment has_error_code=1
-#ifdef CONFIG_XEN
-idtentry xen_debug do_debug has_error_code=0
-idtentry xen_int3 do_int3 has_error_code=0
-idtentry xen_stack_segment do_stack_segment has_error_code=1
-#endif
-idtentry general_protection do_general_protection has_error_code=1
-trace_idtentry page_fault do_page_fault has_error_code=1
-#ifdef CONFIG_KVM_GUEST
-idtentry async_page_fault do_async_page_fault has_error_code=1
-#endif
-#ifdef CONFIG_X86_MCE
-idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
-#endif
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Use slow, but surefire "are we in kernel?" check.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(paranoid_entry)
-	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
-	movl $1,%ebx
-	movl $MSR_GS_BASE,%ecx
-	rdmsr
-	testl %edx,%edx
-	js 1f	/* negative -> in kernel */
-	SWAPGS
-	xorl %ebx,%ebx
-1:	ret
-END(paranoid_entry)
-
-/*
- * "Paranoid" exit path from exception stack.  This is invoked
- * only on return from non-NMI IST interrupts that came
- * from kernel space.
- *
- * We may be returning to very strange contexts (e.g. very early
- * in syscall entry), so checking for preemption here would
- * be complicated.  Fortunately, we there's no good reason
- * to try to handle preemption here.
- */
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(paranoid_exit)
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF_DEBUG
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz paranoid_exit_no_swapgs
-	TRACE_IRQS_IRETQ
-	SWAPGS_UNSAFE_STACK
-	jmp paranoid_exit_restore
-paranoid_exit_no_swapgs:
-	TRACE_IRQS_IRETQ_DEBUG
-paranoid_exit_restore:
-	RESTORE_EXTRA_REGS
-	RESTORE_C_REGS
-	REMOVE_PT_GPREGS_FROM_STACK 8
-	INTERRUPT_RETURN
-END(paranoid_exit)
-
-/*
- * Save all registers in pt_regs, and switch gs if needed.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
- */
-ENTRY(error_entry)
-	cld
-	SAVE_C_REGS 8
-	SAVE_EXTRA_REGS 8
-	xorl %ebx,%ebx
-	testb	$3, CS+8(%rsp)
-	jz	error_kernelspace
-error_swapgs:
-	SWAPGS
-error_sti:
-	TRACE_IRQS_OFF
-	ret
-
-	/*
-	 * There are two places in the kernel that can potentially fault with
-	 * usergs. Handle them here.  B stepping K8s sometimes report a
-	 * truncated RIP for IRET exceptions returning to compat mode. Check
-	 * for these here too.
-	 */
-error_kernelspace:
-	incl %ebx
-	leaq native_irq_return_iret(%rip),%rcx
-	cmpq %rcx,RIP+8(%rsp)
-	je error_bad_iret
-	movl %ecx,%eax	/* zero extend */
-	cmpq %rax,RIP+8(%rsp)
-	je bstep_iret
-	cmpq $gs_change,RIP+8(%rsp)
-	je error_swapgs
-	jmp error_sti
-
-bstep_iret:
-	/* Fix truncated RIP */
-	movq %rcx,RIP+8(%rsp)
-	/* fall through */
-
-error_bad_iret:
-	SWAPGS
-	mov %rsp,%rdi
-	call fixup_bad_iret
-	mov %rax,%rsp
-	decl %ebx	/* Return to usergs */
-	jmp error_sti
-END(error_entry)
-
-
-/* On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it) */
-ENTRY(error_exit)
-	movl %ebx,%eax
-	RESTORE_EXTRA_REGS
-	DISABLE_INTERRUPTS(CLBR_NONE)
-	TRACE_IRQS_OFF
-	testl %eax,%eax
-	jnz retint_kernel
-	jmp retint_user
-END(error_exit)
-
-/* Runs on exception stack */
-ENTRY(nmi)
-	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	/*
-	 * We allow breakpoints in NMIs. If a breakpoint occurs, then
-	 * the iretq it performs will take us out of NMI context.
-	 * This means that we can have nested NMIs where the next
-	 * NMI is using the top of the stack of the previous NMI. We
-	 * can't let it execute because the nested NMI will corrupt the
-	 * stack of the previous NMI. NMI handlers are not re-entrant
-	 * anyway.
-	 *
-	 * To handle this case we do the following:
-	 *  Check the a special location on the stack that contains
-	 *  a variable that is set when NMIs are executing.
-	 *  The interrupted task's stack is also checked to see if it
-	 *  is an NMI stack.
-	 *  If the variable is not set and the stack is not the NMI
-	 *  stack then:
-	 *    o Set the special variable on the stack
-	 *    o Copy the interrupt frame into a "saved" location on the stack
-	 *    o Copy the interrupt frame into a "copy" location on the stack
-	 *    o Continue processing the NMI
-	 *  If the variable is set or the previous stack is the NMI stack:
-	 *    o Modify the "copy" location to jump to the repeate_nmi
-	 *    o return back to the first NMI
-	 *
-	 * Now on exit of the first NMI, we first clear the stack variable
-	 * The NMI stack will tell any nested NMIs at that point that it is
-	 * nested. Then we pop the stack normally with iret, and if there was
-	 * a nested NMI that updated the copy interrupt stack frame, a
-	 * jump will be made to the repeat_nmi code that will handle the second
-	 * NMI.
-	 */
-
-	/* Use %rdx as our temp variable throughout */
-	pushq %rdx
-
-	/*
-	 * If %cs was not the kernel segment, then the NMI triggered in user
-	 * space, which means it is definitely not nested.
-	 */
-	cmpl $__KERNEL_CS, 16(%rsp)
-	jne first_nmi
-
-	/*
-	 * Check the special variable on the stack to see if NMIs are
-	 * executing.
-	 */
-	cmpl $1, -8(%rsp)
-	je nested_nmi
-
-	/*
-	 * Now test if the previous stack was an NMI stack.
-	 * We need the double check. We check the NMI stack to satisfy the
-	 * race when the first NMI clears the variable before returning.
-	 * We check the variable because the first NMI could be in a
-	 * breakpoint routine using a breakpoint stack.
-	 */
-	lea	6*8(%rsp), %rdx
-	/* Compare the NMI stack (rdx) with the stack we came from (4*8(%rsp)) */
-	cmpq	%rdx, 4*8(%rsp)
-	/* If the stack pointer is above the NMI stack, this is a normal NMI */
-	ja	first_nmi
-	subq	$EXCEPTION_STKSZ, %rdx
-	cmpq	%rdx, 4*8(%rsp)
-	/* If it is below the NMI stack, it is a normal NMI */
-	jb	first_nmi
-	/* Ah, it is within the NMI stack, treat it as nested */
-
-nested_nmi:
-	/*
-	 * Do nothing if we interrupted the fixup in repeat_nmi.
-	 * It's about to repeat the NMI handler, so we are fine
-	 * with ignoring this one.
-	 */
-	movq $repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja 1f
-	movq $end_repeat_nmi, %rdx
-	cmpq 8(%rsp), %rdx
-	ja nested_nmi_out
-
-1:
-	/* Set up the interrupted NMIs stack to jump to repeat_nmi */
-	leaq -1*8(%rsp), %rdx
-	movq %rdx, %rsp
-	leaq -10*8(%rsp), %rdx
-	pushq $__KERNEL_DS
-	pushq %rdx
-	pushfq
-	pushq $__KERNEL_CS
-	pushq $repeat_nmi
-
-	/* Put stack back */
-	addq $(6*8), %rsp
-
-nested_nmi_out:
-	popq %rdx
-
-	/* No need to check faults here */
-	INTERRUPT_RETURN
-
-first_nmi:
-	/*
-	 * Because nested NMIs will use the pushed location that we
-	 * stored in rdx, we must keep that space available.
-	 * Here's what our stack frame will look like:
-	 * +-------------------------+
-	 * | original SS             |
-	 * | original Return RSP     |
-	 * | original RFLAGS         |
-	 * | original CS             |
-	 * | original RIP            |
-	 * +-------------------------+
-	 * | temp storage for rdx    |
-	 * +-------------------------+
-	 * | NMI executing variable  |
-	 * +-------------------------+
-	 * | copied SS               |
-	 * | copied Return RSP       |
-	 * | copied RFLAGS           |
-	 * | copied CS               |
-	 * | copied RIP              |
-	 * +-------------------------+
-	 * | Saved SS                |
-	 * | Saved Return RSP        |
-	 * | Saved RFLAGS            |
-	 * | Saved CS                |
-	 * | Saved RIP               |
-	 * +-------------------------+
-	 * | pt_regs                 |
-	 * +-------------------------+
-	 *
-	 * The saved stack frame is used to fix up the copied stack frame
-	 * that a nested NMI may change to make the interrupted NMI iret jump
-	 * to the repeat_nmi. The original stack frame and the temp storage
-	 * is also used by nested NMIs and can not be trusted on exit.
-	 */
-	/* Do not pop rdx, nested NMIs will corrupt that part of the stack */
-	movq (%rsp), %rdx
-
-	/* Set the NMI executing variable on the stack. */
-	pushq $1
-
-	/*
-	 * Leave room for the "copied" frame
-	 */
-	subq $(5*8), %rsp
-
-	/* Copy the stack frame to the Saved frame */
-	.rept 5
-	pushq 11*8(%rsp)
-	.endr
-
-	/* Everything up to here is safe from nested NMIs */
-
-	/*
-	 * If there was a nested NMI, the first NMI's iret will return
-	 * here. But NMIs are still enabled and we can take another
-	 * nested NMI. The nested NMI checks the interrupted RIP to see
-	 * if it is between repeat_nmi and end_repeat_nmi, and if so
-	 * it will just return, as we are about to repeat an NMI anyway.
-	 * This makes it safe to copy to the stack frame that a nested
-	 * NMI will update.
-	 */
-repeat_nmi:
-	/*
-	 * Update the stack variable to say we are still in NMI (the update
-	 * is benign for the non-repeat case, where 1 was pushed just above
-	 * to this very stack slot).
-	 */
-	movq $1, 10*8(%rsp)
-
-	/* Make another copy, this one may be modified by nested NMIs */
-	addq $(10*8), %rsp
-	.rept 5
-	pushq -6*8(%rsp)
-	.endr
-	subq $(5*8), %rsp
-end_repeat_nmi:
-
-	/*
-	 * Everything below this point can be preempted by a nested
-	 * NMI if the first NMI took an exception and reset our iret stack
-	 * so that we repeat another NMI.
-	 */
-	pushq $-1		/* ORIG_RAX: no syscall to restart */
-	ALLOC_PT_GPREGS_ON_STACK
-
-	/*
-	 * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit
-	 * as we should not be calling schedule in NMI context.
-	 * Even with normal interrupts enabled. An NMI should not be
-	 * setting NEED_RESCHED or anything that normal interrupts and
-	 * exceptions might do.
-	 */
-	call paranoid_entry
-
-	/*
-	 * Save off the CR2 register. If we take a page fault in the NMI then
-	 * it could corrupt the CR2 value. If the NMI preempts a page fault
-	 * handler before it was able to read the CR2 register, and then the
-	 * NMI itself takes a page fault, the page fault that was preempted
-	 * will read the information from the NMI page fault and not the
-	 * origin fault. Save it off and restore it if it changes.
-	 * Use the r12 callee-saved register.
-	 */
-	movq %cr2, %r12
-
-	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
-	movq %rsp,%rdi
-	movq $-1,%rsi
-	call do_nmi
-
-	/* Did the NMI take a page fault? Restore cr2 if it did */
-	movq %cr2, %rcx
-	cmpq %rcx, %r12
-	je 1f
-	movq %r12, %cr2
-1:
-	testl %ebx,%ebx				/* swapgs needed? */
-	jnz nmi_restore
-nmi_swapgs:
-	SWAPGS_UNSAFE_STACK
-nmi_restore:
-	RESTORE_EXTRA_REGS
-	RESTORE_C_REGS
-	/* Pop the extra iret frame at once */
-	REMOVE_PT_GPREGS_FROM_STACK 6*8
-
-	/* Clear the NMI executing stack variable */
-	movq $0, 5*8(%rsp)
-	jmp irq_return
-END(nmi)
-
-ENTRY(ignore_sysret)
-	mov $-ENOSYS,%eax
-	sysret
-END(ignore_sysret)
-