[media] dvb_usb_v2: move from dvb-usb to dvb-usb-v2

Move to own directory.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 850 insertions, 0 deletions

diff --git a/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c b/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c
new file mode 100644
index 000000000000..34434557ef65
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb-v2/mxl111sf-i2c.c
@@ -0,0 +1,850 @@
+/*
+ *  mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
+ *
+ *  Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "mxl111sf-i2c.h"
+#include "mxl111sf.h"
+
+/* SW-I2C ----------------------------------------------------------------- */
+
+#define SW_I2C_ADDR		0x1a
+#define SW_I2C_EN		0x02
+#define SW_SCL_OUT		0x04
+#define SW_SDA_OUT		0x08
+#define SW_SDA_IN		0x04
+
+#define SW_I2C_BUSY_ADDR	0x2f
+#define SW_I2C_BUSY		0x02
+
+static int mxl111sf_i2c_bitbang_sendbyte(struct mxl111sf_state *state,
+					 u8 byte)
+{
+	int i, ret;
+	u8 data = 0;
+
+	mxl_i2c("(0x%02x)", byte);
+
+	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+	if (mxl_fail(ret))
+		goto fail;
+
+	for (i = 0; i < 8; i++) {
+
+		data = (byte & (0x80 >> i)) ? SW_SDA_OUT : 0;
+
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN | data);
+		if (mxl_fail(ret))
+			goto fail;
+
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN | data | SW_SCL_OUT);
+		if (mxl_fail(ret))
+			goto fail;
+
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN | data);
+		if (mxl_fail(ret))
+			goto fail;
+	}
+
+	/* last bit was 0 so we need to release SDA */
+	if (!(byte & 1)) {
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN | SW_SDA_OUT);
+		if (mxl_fail(ret))
+			goto fail;
+	}
+
+	/* CLK high for ACK readback */
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+	if (mxl_fail(ret))
+		goto fail;
+
+	/* drop the CLK after getting ACK, SDA will go high right away */
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	if (data & SW_SDA_IN)
+		ret = -EIO;
+fail:
+	return ret;
+}
+
+static int mxl111sf_i2c_bitbang_recvbyte(struct mxl111sf_state *state,
+					 u8 *pbyte)
+{
+	int i, ret;
+	u8 byte = 0;
+	u8 data = 0;
+
+	mxl_i2c("()");
+
+	*pbyte = 0;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	for (i = 0; i < 8; i++) {
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN |
+					 SW_SCL_OUT | SW_SDA_OUT);
+		if (mxl_fail(ret))
+			goto fail;
+
+		ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &data);
+		if (mxl_fail(ret))
+			goto fail;
+
+		if (data & SW_SDA_IN)
+			byte |= (0x80 >> i);
+
+		ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+					 0x10 | SW_I2C_EN | SW_SDA_OUT);
+		if (mxl_fail(ret))
+			goto fail;
+	}
+	*pbyte = byte;
+fail:
+	return ret;
+}
+
+static int mxl111sf_i2c_start(struct mxl111sf_state *state)
+{
+	int ret;
+
+	mxl_i2c("()");
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN); /* start */
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+static int mxl111sf_i2c_stop(struct mxl111sf_state *state)
+{
+	int ret;
+
+	mxl_i2c("()");
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN); /* stop */
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_SCL_OUT | SW_SDA_OUT);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+static int mxl111sf_i2c_ack(struct mxl111sf_state *state)
+{
+	int ret;
+	u8 b = 0;
+
+	mxl_i2c("()");
+
+	ret = mxl111sf_read_reg(state, SW_I2C_BUSY_ADDR, &b);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN);
+	if (mxl_fail(ret))
+		goto fail;
+
+	/* pull SDA low */
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SDA_OUT);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+static int mxl111sf_i2c_nack(struct mxl111sf_state *state)
+{
+	int ret;
+
+	mxl_i2c("()");
+
+	/* SDA high to signal last byte read from slave */
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SCL_OUT | SW_SDA_OUT);
+	if (mxl_fail(ret))
+		goto fail;
+
+	ret = mxl111sf_write_reg(state, SW_I2C_ADDR,
+				 0x10 | SW_I2C_EN | SW_SDA_OUT);
+	mxl_fail(ret);
+fail:
+	return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+static int mxl111sf_i2c_sw_xfer_msg(struct mxl111sf_state *state,
+				    struct i2c_msg *msg)
+{
+	int i, ret;
+
+	mxl_i2c("()");
+
+	if (msg->flags & I2C_M_RD) {
+
+		ret = mxl111sf_i2c_start(state);
+		if (mxl_fail(ret))
+			goto fail;
+
+		ret = mxl111sf_i2c_bitbang_sendbyte(state,
+						    (msg->addr << 1) | 0x01);
+		if (mxl_fail(ret)) {
+			mxl111sf_i2c_stop(state);
+			goto fail;
+		}
+
+		for (i = 0; i < msg->len; i++) {
+			ret = mxl111sf_i2c_bitbang_recvbyte(state,
+							    &msg->buf[i]);
+			if (mxl_fail(ret)) {
+				mxl111sf_i2c_stop(state);
+				goto fail;
+			}
+
+			if (i < msg->len - 1)
+				mxl111sf_i2c_ack(state);
+		}
+
+		mxl111sf_i2c_nack(state);
+
+		ret = mxl111sf_i2c_stop(state);
+		if (mxl_fail(ret))
+			goto fail;
+
+	} else {
+
+		ret = mxl111sf_i2c_start(state);
+		if (mxl_fail(ret))
+			goto fail;
+
+		ret = mxl111sf_i2c_bitbang_sendbyte(state,
+						    (msg->addr << 1) & 0xfe);
+		if (mxl_fail(ret)) {
+			mxl111sf_i2c_stop(state);
+			goto fail;
+		}
+
+		for (i = 0; i < msg->len; i++) {
+			ret = mxl111sf_i2c_bitbang_sendbyte(state,
+							    msg->buf[i]);
+			if (mxl_fail(ret)) {
+				mxl111sf_i2c_stop(state);
+				goto fail;
+			}
+		}
+
+		/* FIXME: we only want to do this on the last transaction */
+		mxl111sf_i2c_stop(state);
+	}
+fail:
+	return ret;
+}
+
+/* HW-I2C ----------------------------------------------------------------- */
+
+#define USB_WRITE_I2C_CMD     0x99
+#define USB_READ_I2C_CMD      0xdd
+#define USB_END_I2C_CMD       0xfe
+
+#define USB_WRITE_I2C_CMD_LEN   26
+#define USB_READ_I2C_CMD_LEN    24
+
+#define I2C_MUX_REG           0x30
+#define I2C_CONTROL_REG       0x00
+#define I2C_SLAVE_ADDR_REG    0x08
+#define I2C_DATA_REG          0x0c
+#define I2C_INT_STATUS_REG    0x10
+
+static int mxl111sf_i2c_send_data(struct mxl111sf_state *state,
+				  u8 index, u8 *wdata)
+{
+	int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+				    &wdata[1], 25, NULL, 0);
+	mxl_fail(ret);
+
+	return ret;
+}
+
+static int mxl111sf_i2c_get_data(struct mxl111sf_state *state,
+				 u8 index, u8 *wdata, u8 *rdata)
+{
+	int ret = mxl111sf_ctrl_msg(state->d, wdata[0],
+				    &wdata[1], 25, rdata, 24);
+	mxl_fail(ret);
+
+	return ret;
+}
+
+static u8 mxl111sf_i2c_check_status(struct mxl111sf_state *state)
+{
+	u8 status = 0;
+	u8 buf[26];
+
+	mxl_i2c_adv("()");
+
+	buf[0] = USB_READ_I2C_CMD;
+	buf[1] = 0x00;
+
+	buf[2] = I2C_INT_STATUS_REG;
+	buf[3] = 0x00;
+	buf[4] = 0x00;
+
+	buf[5] = USB_END_I2C_CMD;
+
+	mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+	if (buf[1] & 0x04)
+		status = 1;
+
+	return status;
+}
+
+static u8 mxl111sf_i2c_check_fifo(struct mxl111sf_state *state)
+{
+	u8 status = 0;
+	u8 buf[26];
+
+	mxl_i2c("()");
+
+	buf[0] = USB_READ_I2C_CMD;
+	buf[1] = 0x00;
+
+	buf[2] = I2C_MUX_REG;
+	buf[3] = 0x00;
+	buf[4] = 0x00;
+
+	buf[5] = I2C_INT_STATUS_REG;
+	buf[6] = 0x00;
+	buf[7] = 0x00;
+	buf[8] = USB_END_I2C_CMD;
+
+	mxl111sf_i2c_get_data(state, 0, buf, buf);
+
+	if (0x08 == (buf[1] & 0x08))
+		status = 1;
+
+	if ((buf[5] & 0x02) == 0x02)
+		mxl_i2c("(buf[5] & 0x02) == 0x02"); /* FIXME */
+
+	return status;
+}
+
+static int mxl111sf_i2c_readagain(struct mxl111sf_state *state,
+				  u8 count, u8 *rbuf)
+{
+	u8 i2c_w_data[26];
+	u8 i2c_r_data[24];
+	u8 i = 0;
+	u8 fifo_status = 0;
+	int status = 0;
+
+	mxl_i2c("read %d bytes", count);
+
+	while ((fifo_status == 0) && (i++ < 5))
+		fifo_status = mxl111sf_i2c_check_fifo(state);
+
+	i2c_w_data[0] = 0xDD;
+	i2c_w_data[1] = 0x00;
+
+	for (i = 2; i < 26; i++)
+		i2c_w_data[i] = 0xFE;
+
+	for (i = 0; i < count; i++) {
+		i2c_w_data[2+(i*3)] = 0x0C;
+		i2c_w_data[3+(i*3)] = 0x00;
+		i2c_w_data[4+(i*3)] = 0x00;
+	}
+
+	mxl111sf_i2c_get_data(state, 0, i2c_w_data, i2c_r_data);
+
+	/* Check for I2C NACK status */
+	if (mxl111sf_i2c_check_status(state) == 1) {
+		mxl_i2c("error!");
+	} else {
+		for (i = 0; i < count; i++) {
+			rbuf[i] = i2c_r_data[(i*3)+1];
+			mxl_i2c("%02x\t %02x",
+				i2c_r_data[(i*3)+1],
+				i2c_r_data[(i*3)+2]);
+		}
+
+		status = 1;
+	}
+
+	return status;
+}
+
+#define HWI2C400 1
+static int mxl111sf_i2c_hw_xfer_msg(struct mxl111sf_state *state,
+				    struct i2c_msg *msg)
+{
+	int i, k, ret = 0;
+	u16 index = 0;
+	u8 buf[26];
+	u8 i2c_r_data[24];
+	u16 block_len;
+	u16 left_over_len;
+	u8 rd_status[8];
+	u8 ret_status;
+	u8 readbuff[26];
+
+	mxl_i2c("addr: 0x%02x, read buff len: %d, write buff len: %d",
+		msg->addr, (msg->flags & I2C_M_RD) ? msg->len : 0,
+		(!(msg->flags & I2C_M_RD)) ? msg->len : 0);
+
+	for (index = 0; index < 26; index++)
+		buf[index] = USB_END_I2C_CMD;
+
+	/* command to indicate data payload is destined for I2C interface */
+	buf[0] = USB_WRITE_I2C_CMD;
+	buf[1] = 0x00;
+
+	/* enable I2C interface */
+	buf[2] = I2C_MUX_REG;
+	buf[3] = 0x80;
+	buf[4] = 0x00;
+
+	/* enable I2C interface */
+	buf[5] = I2C_MUX_REG;
+	buf[6] = 0x81;
+	buf[7] = 0x00;
+
+	/* set Timeout register on I2C interface */
+	buf[8] = 0x14;
+	buf[9] = 0xff;
+	buf[10] = 0x00;
+#if 0
+	/* enable Interrupts on I2C interface */
+	buf[8] = 0x24;
+	buf[9] = 0xF7;
+	buf[10] = 0x00;
+#endif
+	buf[11] = 0x24;
+	buf[12] = 0xF7;
+	buf[13] = 0x00;
+
+	ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+	/* write data on I2C bus */
+	if (!(msg->flags & I2C_M_RD) && (msg->len > 0)) {
+		mxl_i2c("%d\t%02x", msg->len, msg->buf[0]);
+
+		/* control register on I2C interface to initialize I2C bus */
+		buf[2] = I2C_CONTROL_REG;
+		buf[3] = 0x5E;
+		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+		/* I2C Slave device Address */
+		buf[5] = I2C_SLAVE_ADDR_REG;
+		buf[6] = (msg->addr);
+		buf[7] = 0x00;
+		buf[8] = USB_END_I2C_CMD;
+		ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+		/* check for slave device status */
+		if (mxl111sf_i2c_check_status(state) == 1) {
+			mxl_i2c("NACK writing slave address %02x",
+				msg->addr);
+			/* if NACK, stop I2C bus and exit */
+			buf[2] = I2C_CONTROL_REG;
+			buf[3] = 0x4E;
+			buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+			ret = -EIO;
+			goto exit;
+		}
+
+		/* I2C interface can do I2C operations in block of 8 bytes of
+		   I2C data. calculation to figure out number of blocks of i2c
+		   data required to program */
+		block_len = (msg->len / 8);
+		left_over_len = (msg->len % 8);
+		index = 0;
+
+		mxl_i2c("block_len %d, left_over_len %d",
+			block_len, left_over_len);
+
+		for (index = 0; index < block_len; index++) {
+			for (i = 0; i < 8; i++) {
+				/* write data on I2C interface */
+				buf[2+(i*3)] = I2C_DATA_REG;
+				buf[3+(i*3)] = msg->buf[(index*8)+i];
+				buf[4+(i*3)] = 0x00;
+			}
+
+			ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+			/* check for I2C NACK status */
+			if (mxl111sf_i2c_check_status(state) == 1) {
+				mxl_i2c("NACK writing slave address %02x",
+					msg->addr);
+
+				/* if NACK, stop I2C bus and exit */
+				buf[2] = I2C_CONTROL_REG;
+				buf[3] = 0x4E;
+				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+				ret = -EIO;
+				goto exit;
+			}
+
+		}
+
+		if (left_over_len) {
+			for (k = 0; k < 26; k++)
+				buf[k] = USB_END_I2C_CMD;
+
+			buf[0] = 0x99;
+			buf[1] = 0x00;
+
+			for (i = 0; i < left_over_len; i++) {
+				buf[2+(i*3)] = I2C_DATA_REG;
+				buf[3+(i*3)] = msg->buf[(index*8)+i];
+				mxl_i2c("index = %d %d data %d",
+					index, i, msg->buf[(index*8)+i]);
+				buf[4+(i*3)] = 0x00;
+			}
+			ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+			/* check for I2C NACK status */
+			if (mxl111sf_i2c_check_status(state) == 1) {
+				mxl_i2c("NACK writing slave address %02x",
+					msg->addr);
+
+				/* if NACK, stop I2C bus and exit */
+				buf[2] = I2C_CONTROL_REG;
+				buf[3] = 0x4E;
+				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+				ret = -EIO;
+				goto exit;
+			}
+
+		}
+
+		/* issue I2C STOP after write */
+		buf[2] = I2C_CONTROL_REG;
+		buf[3] = 0x4E;
+		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+	}
+
+	/* read data from I2C bus */
+	if ((msg->flags & I2C_M_RD) && (msg->len > 0)) {
+		mxl_i2c("read buf len %d", msg->len);
+
+		/* command to indicate data payload is
+		   destined for I2C interface */
+		buf[2] = I2C_CONTROL_REG;
+		buf[3] = 0xDF;
+		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+		/* I2C xfer length */
+		buf[5] = 0x14;
+		buf[6] = (msg->len & 0xFF);
+		buf[7] = 0;
+
+		/* I2C slave device Address */
+		buf[8] = I2C_SLAVE_ADDR_REG;
+		buf[9] = msg->addr;
+		buf[10] = 0x00;
+		buf[11] = USB_END_I2C_CMD;
+		ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+		/* check for I2C NACK status */
+		if (mxl111sf_i2c_check_status(state) == 1) {
+			mxl_i2c("NACK reading slave address %02x",
+				msg->addr);
+
+			/* if NACK, stop I2C bus and exit */
+			buf[2] = I2C_CONTROL_REG;
+			buf[3] = 0xC7;
+			buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+			ret = -EIO;
+			goto exit;
+		}
+
+		/* I2C interface can do I2C operations in block of 8 bytes of
+		   I2C data. calculation to figure out number of blocks of
+		   i2c data required to program */
+		block_len = ((msg->len) / 8);
+		left_over_len = ((msg->len) % 8);
+		index = 0;
+
+		mxl_i2c("block_len %d, left_over_len %d",
+			block_len, left_over_len);
+
+		/* command to read data from I2C interface */
+		buf[0] = USB_READ_I2C_CMD;
+		buf[1] = 0x00;
+
+		for (index = 0; index < block_len; index++) {
+			/* setup I2C read request packet on I2C interface */
+			for (i = 0; i < 8; i++) {
+				buf[2+(i*3)] = I2C_DATA_REG;
+				buf[3+(i*3)] = 0x00;
+				buf[4+(i*3)] = 0x00;
+			}
+
+			ret = mxl111sf_i2c_get_data(state, 0, buf, i2c_r_data);
+
+			/* check for I2C NACK status */
+			if (mxl111sf_i2c_check_status(state) == 1) {
+				mxl_i2c("NACK reading slave address %02x",
+					msg->addr);
+
+				/* if NACK, stop I2C bus and exit */
+				buf[2] = I2C_CONTROL_REG;
+				buf[3] = 0xC7;
+				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+				ret = -EIO;
+				goto exit;
+			}
+
+			/* copy data from i2c data payload to read buffer */
+			for (i = 0; i < 8; i++) {
+				rd_status[i] = i2c_r_data[(i*3)+2];
+
+				if (rd_status[i] == 0x04) {
+					if (i < 7) {
+						mxl_i2c("i2c fifo empty!"
+							" @ %d", i);
+						msg->buf[(index*8)+i] =
+							i2c_r_data[(i*3)+1];
+						/* read again */
+						ret_status =
+							mxl111sf_i2c_readagain(
+								state, 8-(i+1),
+								readbuff);
+						if (ret_status == 1) {
+							for (k = 0;
+							     k < 8-(i+1);
+							     k++) {
+
+					msg->buf[(index*8)+(k+i+1)] =
+						readbuff[k];
+					mxl_i2c("read data: %02x\t %02x",
+						msg->buf[(index*8)+(k+i)],
+						(index*8)+(k+i));
+					mxl_i2c("read data: %02x\t %02x",
+						msg->buf[(index*8)+(k+i+1)],
+						readbuff[k]);
+
+							}
+							goto stop_copy;
+						} else {
+							mxl_i2c("readagain "
+								"ERROR!");
+						}
+					} else {
+						msg->buf[(index*8)+i] =
+							i2c_r_data[(i*3)+1];
+					}
+				} else {
+					msg->buf[(index*8)+i] =
+						i2c_r_data[(i*3)+1];
+				}
+			}
+stop_copy:
+			;
+
+		}
+
+		if (left_over_len) {
+			for (k = 0; k < 26; k++)
+				buf[k] = USB_END_I2C_CMD;
+
+			buf[0] = 0xDD;
+			buf[1] = 0x00;
+
+			for (i = 0; i < left_over_len; i++) {
+				buf[2+(i*3)] = I2C_DATA_REG;
+				buf[3+(i*3)] = 0x00;
+				buf[4+(i*3)] = 0x00;
+			}
+			ret = mxl111sf_i2c_get_data(state, 0, buf,
+						    i2c_r_data);
+
+			/* check for I2C NACK status */
+			if (mxl111sf_i2c_check_status(state) == 1) {
+				mxl_i2c("NACK reading slave address %02x",
+					msg->addr);
+
+				/* if NACK, stop I2C bus and exit */
+				buf[2] = I2C_CONTROL_REG;
+				buf[3] = 0xC7;
+				buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+				ret = -EIO;
+				goto exit;
+			}
+
+			for (i = 0; i < left_over_len; i++) {
+				msg->buf[(block_len*8)+i] =
+					i2c_r_data[(i*3)+1];
+				mxl_i2c("read data: %02x\t %02x",
+					i2c_r_data[(i*3)+1],
+					i2c_r_data[(i*3)+2]);
+			}
+		}
+
+		/* indicate I2C interface to issue NACK
+		   after next I2C read op */
+		buf[0] = USB_WRITE_I2C_CMD;
+		buf[1] = 0x00;
+
+		/* control register */
+		buf[2] = I2C_CONTROL_REG;
+		buf[3] = 0x17;
+		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+		buf[5] = USB_END_I2C_CMD;
+		ret = mxl111sf_i2c_send_data(state, 0, buf);
+
+		/* control register */
+		buf[2] = I2C_CONTROL_REG;
+		buf[3] = 0xC7;
+		buf[4] = (HWI2C400) ? 0x03 : 0x0D;
+
+	}
+exit:
+	/* STOP and disable I2C MUX */
+	buf[0] = USB_WRITE_I2C_CMD;
+	buf[1] = 0x00;
+
+	/* de-initilize I2C BUS */
+	buf[5] = USB_END_I2C_CMD;
+	mxl111sf_i2c_send_data(state, 0, buf);
+
+	/* Control Register */
+	buf[2] = I2C_CONTROL_REG;
+	buf[3] = 0xDF;
+	buf[4] = 0x03;
+
+	/* disable I2C interface */
+	buf[5] = I2C_MUX_REG;
+	buf[6] = 0x00;
+	buf[7] = 0x00;
+
+	/* de-initilize I2C BUS */
+	buf[8] = USB_END_I2C_CMD;
+	mxl111sf_i2c_send_data(state, 0, buf);
+
+	/* disable I2C interface */
+	buf[2] = I2C_MUX_REG;
+	buf[3] = 0x81;
+	buf[4] = 0x00;
+
+	/* disable I2C interface */
+	buf[5] = I2C_MUX_REG;
+	buf[6] = 0x00;
+	buf[7] = 0x00;
+
+	/* disable I2C interface */
+	buf[8] = I2C_MUX_REG;
+	buf[9] = 0x00;
+	buf[10] = 0x00;
+
+	buf[11] = USB_END_I2C_CMD;
+	mxl111sf_i2c_send_data(state, 0, buf);
+
+	return ret;
+}
+
+/* ------------------------------------------------------------------------ */
+
+int mxl111sf_i2c_xfer(struct i2c_adapter *adap,
+		      struct i2c_msg msg[], int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct mxl111sf_state *state = d->priv;
+	int hwi2c = (state->chip_rev > MXL111SF_V6);
+	int i, ret;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		ret = (hwi2c) ?
+			mxl111sf_i2c_hw_xfer_msg(state, &msg[i]) :
+			mxl111sf_i2c_sw_xfer_msg(state, &msg[i]);
+		if (mxl_fail(ret)) {
+			mxl_debug_adv("failed with error %d on i2c "
+				      "transaction %d of %d, %sing %d bytes "
+				      "to/from 0x%02x", ret, i+1, num,
+				      (msg[i].flags & I2C_M_RD) ?
+				      "read" : "writ",
+				      msg[i].len, msg[i].addr);
+
+			break;
+		}
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return i == num ? num : -EREMOTEIO;
+}
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */