Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...

1 files changed, 340 insertions, 0 deletions

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
new file mode 100644
index 000000000000..8eb42620129c
--- /dev/null
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef	BRCMFMAC_SDIO_H
+#define	BRCMFMAC_SDIO_H
+
+#include <linux/skbuff.h>
+#include <linux/firmware.h>
+#include "firmware.h"
+
+#define SDIO_FUNC_0		0
+#define SDIO_FUNC_1		1
+#define SDIO_FUNC_2		2
+
+#define SDIOD_FBR_SIZE		0x100
+
+/* io_en */
+#define SDIO_FUNC_ENABLE_1	0x02
+#define SDIO_FUNC_ENABLE_2	0x04
+
+/* io_rdys */
+#define SDIO_FUNC_READY_1	0x02
+#define SDIO_FUNC_READY_2	0x04
+
+/* intr_status */
+#define INTR_STATUS_FUNC1	0x2
+#define INTR_STATUS_FUNC2	0x4
+
+/* Maximum number of I/O funcs */
+#define SDIOD_MAX_IOFUNCS	7
+
+/* mask of register map */
+#define REG_F0_REG_MASK		0x7FF
+#define REG_F1_MISC_MASK	0x1FFFF
+
+/* as of sdiod rev 0, supports 3 functions */
+#define SBSDIO_NUM_FUNCTION		3
+
+/* function 0 vendor specific CCCR registers */
+#define SDIO_CCCR_BRCM_CARDCAP			0xf0
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT	0x02
+#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT	0x04
+#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC	0x08
+#define SDIO_CCCR_BRCM_CARDCTRL		0xf1
+#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET	0x02
+#define SDIO_CCCR_BRCM_SEPINT			0xf2
+
+#define  SDIO_SEPINT_MASK		0x01
+#define  SDIO_SEPINT_OE			0x02
+#define  SDIO_SEPINT_ACT_HI		0x04
+
+/* function 1 miscellaneous registers */
+
+/* sprom command and status */
+#define SBSDIO_SPROM_CS			0x10000
+/* sprom info register */
+#define SBSDIO_SPROM_INFO		0x10001
+/* sprom indirect access data byte 0 */
+#define SBSDIO_SPROM_DATA_LOW		0x10002
+/* sprom indirect access data byte 1 */
+#define SBSDIO_SPROM_DATA_HIGH		0x10003
+/* sprom indirect access addr byte 0 */
+#define SBSDIO_SPROM_ADDR_LOW		0x10004
+/* gpio select */
+#define SBSDIO_GPIO_SELECT		0x10005
+/* gpio output */
+#define SBSDIO_GPIO_OUT			0x10006
+/* gpio enable */
+#define SBSDIO_GPIO_EN			0x10007
+/* rev < 7, watermark for sdio device */
+#define SBSDIO_WATERMARK		0x10008
+/* control busy signal generation */
+#define SBSDIO_DEVICE_CTL		0x10009
+
+/* SB Address Window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRLOW		0x1000A
+/* SB Address Window Mid (b23:b16) */
+#define SBSDIO_FUNC1_SBADDRMID		0x1000B
+/* SB Address Window High (b31:b24)    */
+#define SBSDIO_FUNC1_SBADDRHIGH		0x1000C
+/* Frame Control (frame term/abort) */
+#define SBSDIO_FUNC1_FRAMECTRL		0x1000D
+/* ChipClockCSR (ALP/HT ctl/status) */
+#define SBSDIO_FUNC1_CHIPCLKCSR		0x1000E
+/* SdioPullUp (on cmd, d0-d2) */
+#define SBSDIO_FUNC1_SDIOPULLUP		0x1000F
+/* Write Frame Byte Count Low */
+#define SBSDIO_FUNC1_WFRAMEBCLO		0x10019
+/* Write Frame Byte Count High */
+#define SBSDIO_FUNC1_WFRAMEBCHI		0x1001A
+/* Read Frame Byte Count Low */
+#define SBSDIO_FUNC1_RFRAMEBCLO		0x1001B
+/* Read Frame Byte Count High */
+#define SBSDIO_FUNC1_RFRAMEBCHI		0x1001C
+/* MesBusyCtl (rev 11) */
+#define SBSDIO_FUNC1_MESBUSYCTRL	0x1001D
+/* Sdio Core Rev 12 */
+#define SBSDIO_FUNC1_WAKEUPCTRL		0x1001E
+#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK		0x1
+#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT	0
+#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK		0x2
+#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT		1
+#define SBSDIO_FUNC1_SLEEPCSR		0x1001F
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK		0x1
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT		0
+#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN		1
+#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK	0x2
+#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT	1
+
+#define SBSDIO_FUNC1_MISC_REG_START	0x10000	/* f1 misc register start */
+#define SBSDIO_FUNC1_MISC_REG_LIMIT	0x1001F	/* f1 misc register end */
+
+/* function 1 OCP space */
+
+/* sb offset addr is <= 15 bits, 32k */
+#define SBSDIO_SB_OFT_ADDR_MASK		0x07FFF
+#define SBSDIO_SB_OFT_ADDR_LIMIT	0x08000
+/* with b15, maps to 32-bit SB access */
+#define SBSDIO_SB_ACCESS_2_4B_FLAG	0x08000
+
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+
+#define SBSDIO_SBADDRLOW_MASK		0x80	/* Valid bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK		0xff	/* Valid bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK		0xffU	/* Valid bits in SBADDRHIGH */
+/* Address bits from SBADDR regs */
+#define SBSDIO_SBWINDOW_MASK		0xffff8000
+
+#define SDIOH_READ              0	/* Read request */
+#define SDIOH_WRITE             1	/* Write request */
+
+#define SDIOH_DATA_FIX          0	/* Fixed addressing */
+#define SDIOH_DATA_INC          1	/* Incremental addressing */
+
+/* internal return code */
+#define SUCCESS	0
+#define ERROR	1
+
+/* Packet alignment for most efficient SDIO (can change based on platform) */
+#define BRCMF_SDALIGN	(1 << 6)
+
+/* watchdog polling interval in ms */
+#define BRCMF_WD_POLL_MS	10
+
+struct brcmf_sdreg {
+	int func;
+	int offset;
+	int value;
+};
+
+struct brcmf_sdio;
+
+struct brcmf_sdio_dev {
+	struct sdio_func *func[SDIO_MAX_FUNCS];
+	u8 num_funcs;			/* Supported funcs on client */
+	u32 sbwad;			/* Save backplane window address */
+	struct brcmf_sdio *bus;
+	atomic_t suspend;		/* suspend flag */
+	wait_queue_head_t request_word_wait;
+	wait_queue_head_t request_buffer_wait;
+	struct device *dev;
+	struct brcmf_bus *bus_if;
+	struct brcmfmac_sdio_platform_data *pdata;
+	bool oob_irq_requested;
+	bool irq_en;			/* irq enable flags */
+	spinlock_t irq_en_lock;
+	bool irq_wake;			/* irq wake enable flags */
+	bool sg_support;
+	uint max_request_size;
+	ushort max_segment_count;
+	uint max_segment_size;
+	uint txglomsz;
+	struct sg_table sgtable;
+	char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
+	char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
+	bool wowl_enabled;
+};
+
+/* sdio core registers */
+struct sdpcmd_regs {
+	u32 corecontrol;		/* 0x00, rev8 */
+	u32 corestatus;			/* rev8 */
+	u32 PAD[1];
+	u32 biststatus;			/* rev8 */
+
+	/* PCMCIA access */
+	u16 pcmciamesportaladdr;	/* 0x010, rev8 */
+	u16 PAD[1];
+	u16 pcmciamesportalmask;	/* rev8 */
+	u16 PAD[1];
+	u16 pcmciawrframebc;		/* rev8 */
+	u16 PAD[1];
+	u16 pcmciaunderflowtimer;	/* rev8 */
+	u16 PAD[1];
+
+	/* interrupt */
+	u32 intstatus;			/* 0x020, rev8 */
+	u32 hostintmask;		/* rev8 */
+	u32 intmask;			/* rev8 */
+	u32 sbintstatus;		/* rev8 */
+	u32 sbintmask;			/* rev8 */
+	u32 funcintmask;		/* rev4 */
+	u32 PAD[2];
+	u32 tosbmailbox;		/* 0x040, rev8 */
+	u32 tohostmailbox;		/* rev8 */
+	u32 tosbmailboxdata;		/* rev8 */
+	u32 tohostmailboxdata;		/* rev8 */
+
+	/* synchronized access to registers in SDIO clock domain */
+	u32 sdioaccess;			/* 0x050, rev8 */
+	u32 PAD[3];
+
+	/* PCMCIA frame control */
+	u8 pcmciaframectrl;		/* 0x060, rev8 */
+	u8 PAD[3];
+	u8 pcmciawatermark;		/* rev8 */
+	u8 PAD[155];
+
+	/* interrupt batching control */
+	u32 intrcvlazy;			/* 0x100, rev8 */
+	u32 PAD[3];
+
+	/* counters */
+	u32 cmd52rd;			/* 0x110, rev8 */
+	u32 cmd52wr;			/* rev8 */
+	u32 cmd53rd;			/* rev8 */
+	u32 cmd53wr;			/* rev8 */
+	u32 abort;			/* rev8 */
+	u32 datacrcerror;		/* rev8 */
+	u32 rdoutofsync;		/* rev8 */
+	u32 wroutofsync;		/* rev8 */
+	u32 writebusy;			/* rev8 */
+	u32 readwait;			/* rev8 */
+	u32 readterm;			/* rev8 */
+	u32 writeterm;			/* rev8 */
+	u32 PAD[40];
+	u32 clockctlstatus;		/* rev8 */
+	u32 PAD[7];
+
+	u32 PAD[128];			/* DMA engines */
+
+	/* SDIO/PCMCIA CIS region */
+	char cis[512];			/* 0x400-0x5ff, rev6 */
+
+	/* PCMCIA function control registers */
+	char pcmciafcr[256];		/* 0x600-6ff, rev6 */
+	u16 PAD[55];
+
+	/* PCMCIA backplane access */
+	u16 backplanecsr;		/* 0x76E, rev6 */
+	u16 backplaneaddr0;		/* rev6 */
+	u16 backplaneaddr1;		/* rev6 */
+	u16 backplaneaddr2;		/* rev6 */
+	u16 backplaneaddr3;		/* rev6 */
+	u16 backplanedata0;		/* rev6 */
+	u16 backplanedata1;		/* rev6 */
+	u16 backplanedata2;		/* rev6 */
+	u16 backplanedata3;		/* rev6 */
+	u16 PAD[31];
+
+	/* sprom "size" & "blank" info */
+	u16 spromstatus;		/* 0x7BE, rev2 */
+	u32 PAD[464];
+
+	u16 PAD[0x80];
+};
+
+/* Register/deregister interrupt handler. */
+int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
+int brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
+
+/* sdio device register access interface */
+u8 brcmf_sdiod_regrb(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+u32 brcmf_sdiod_regrl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
+void brcmf_sdiod_regwb(struct brcmf_sdio_dev *sdiodev, u32 addr, u8 data,
+		       int *ret);
+void brcmf_sdiod_regwl(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
+		       int *ret);
+
+/* Buffer transfer to/from device (client) core via cmd53.
+ *   fn:       function number
+ *   flags:    backplane width, address increment, sync/async
+ *   buf:      pointer to memory data buffer
+ *   nbytes:   number of bytes to transfer to/from buf
+ *   pkt:      pointer to packet associated with buf (if any)
+ *   complete: callback function for command completion (async only)
+ *   handle:   handle for completion callback (first arg in callback)
+ * Returns 0 or error code.
+ * NOTE: Async operation is not currently supported.
+ */
+int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
+			 struct sk_buff_head *pktq);
+int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+
+int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
+int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
+int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
+			   struct sk_buff_head *pktq, uint totlen);
+
+/* Flags bits */
+
+/* Four-byte target (backplane) width (vs. two-byte) */
+#define SDIO_REQ_4BYTE	0x1
+/* Fixed address (FIFO) (vs. incrementing address) */
+#define SDIO_REQ_FIXED	0x2
+
+/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
+ *   rw:       read or write (0/1)
+ *   addr:     direct SDIO address
+ *   buf:      pointer to memory data buffer
+ *   nbytes:   number of bytes to transfer to/from buf
+ * Returns 0 or error code.
+ */
+int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+		      u8 *data, uint size);
+
+/* Issue an abort to the specified function */
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, uint fn);
+
+struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
+void brcmf_sdio_remove(struct brcmf_sdio *bus);
+void brcmf_sdio_isr(struct brcmf_sdio *bus);
+
+void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick);
+void brcmf_sdio_wowl_config(struct device *dev, bool enabled);
+
+#endif /* BRCMFMAC_SDIO_H */