diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2017-02-09 17:03:46 +1100 |
---|---|---|
committer | Stephen Rothwell <sfr@canb.auug.org.au> | 2017-02-09 17:03:46 +1100 |
commit | 4824579dcd8be7c8580237785ce6f7b31db054ea (patch) | |
tree | 174a084a5068489ab7030227c231fe6f7d0e3124 /drivers/net/wireless | |
parent | a9be5a59553a6b5d424d8ed37f058edfcc09a7d9 (diff) | |
parent | 1842d91b7b4c6be23064b6601127293173aa750c (diff) |
Merge branch 'akpm/master'
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r-- | drivers/net/wireless/ath/ath9k/ani.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/intel/ipw2x00/ipw2100.c | 6 | ||||
-rw-r--r-- | drivers/net/wireless/intel/ipw2x00/ipw2200.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/intel/iwlegacy/4965-mac.c | 30 | ||||
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 16 | ||||
-rw-r--r-- | drivers/net/wireless/marvell/mwifiex/wmm.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rsi/rsi_91x_usb.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wl18xx/main.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/ti/wlcore/init.c | 2 |
11 files changed, 38 insertions, 38 deletions
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 815efe9fd208..5214dd7a3936 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = { /* * MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm. * With OFDM for single stream you just add up all antenna inputs, you're - * only interested in what you get after FFT. Signal aligment is also not + * only interested in what you get after FFT. Signal alignment is also not * required for OFDM because any phase difference adds up in the frequency * domain. * * MRC requires extra work for use with CCK. You need to align the antenna * signals from the different antenna before you can add the signals together. - * You need aligment of signals as CCK is in time domain, so addition can cancel + * You need alignment of signals as CCK is in time domain, so addition can cancel * your signal completely if phase is 180 degrees (think of adding sine waves). * You also need to remove noise before the addition and this is where ANI * MRC CCK comes into play. One of the antenna inputs may be stronger but diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 10098b7586f3..944b83cfc519 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4874,7 +4874,7 @@ brcmf_cfg80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, kfree(af_params); } else { brcmf_dbg(TRACE, "Unhandled, fc=%04x!!\n", mgmt->frame_control); - brcmf_dbg_hex_dump(true, buf, len, "payload, len=%Zu\n", len); + brcmf_dbg_hex_dump(true, buf, len, "payload, len=%zu\n", len); } exit: diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2100.c b/drivers/net/wireless/intel/ipw2x00/ipw2100.c index 356aba9d3d53..f922859acf40 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c @@ -1238,7 +1238,7 @@ static int ipw2100_get_hw_features(struct ipw2100_priv *priv) } /* - * Start firmware execution after power on and intialization + * Start firmware execution after power on and initialization * The sequence is: * 1. Release ARC * 2. Wait for f/w initialization completes; @@ -1277,7 +1277,7 @@ static int ipw2100_start_adapter(struct ipw2100_priv *priv) /* Release ARC - clear reset bit */ write_register(priv->net_dev, IPW_REG_RESET_REG, 0); - /* wait for f/w intialization complete */ + /* wait for f/w initialization complete */ IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n"); i = 5000; do { @@ -5652,7 +5652,7 @@ static void shim__set_security(struct net_device *dev, /* As a temporary work around to enable WPA until we figure out why * wpa_supplicant toggles the security capability of the driver, which - * forces a disassocation with force_update... + * forces a disassociation with force_update... * * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/ if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING))) diff --git a/drivers/net/wireless/intel/ipw2x00/ipw2200.c b/drivers/net/wireless/intel/ipw2x00/ipw2200.c index ef9af8a29cad..5ef3c5cc47c5 100644 --- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c @@ -3974,7 +3974,7 @@ static void ipw_send_disassociate(struct ipw_priv *priv, int quiet) return; } - IPW_DEBUG_ASSOC("Disassocation attempt from %pM " + IPW_DEBUG_ASSOC("Disassociation attempt from %pM " "on channel %d.\n", priv->assoc_request.bssid, priv->assoc_request.channel); @@ -5196,7 +5196,7 @@ static void ipw_rx_queue_restock(struct ipw_priv *priv) * Move all used packet from rx_used to rx_free, allocating a new SKB for each. * Also restock the Rx queue via ipw_rx_queue_restock. * - * This is called as a scheduled work item (except for during intialization) + * This is called as a scheduled work item (except for during initialization) */ static void ipw_rx_queue_replenish(void *data) { diff --git a/drivers/net/wireless/intel/iwlegacy/4965-mac.c b/drivers/net/wireless/intel/iwlegacy/4965-mac.c index a91d170a614b..2781f5728d07 100644 --- a/drivers/net/wireless/intel/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/intel/iwlegacy/4965-mac.c @@ -4855,39 +4855,39 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) */ D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver); - D_INFO("f/w package hdr runtime inst size = %Zd\n", pieces.inst_size); - D_INFO("f/w package hdr runtime data size = %Zd\n", pieces.data_size); - D_INFO("f/w package hdr init inst size = %Zd\n", pieces.init_size); - D_INFO("f/w package hdr init data size = %Zd\n", pieces.init_data_size); - D_INFO("f/w package hdr boot inst size = %Zd\n", pieces.boot_size); + D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size); + D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size); + D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size); + D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size); + D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size); /* Verify that uCode images will fit in card's SRAM */ if (pieces.inst_size > il->hw_params.max_inst_size) { - IL_ERR("uCode instr len %Zd too large to fit in\n", + IL_ERR("uCode instr len %zd too large to fit in\n", pieces.inst_size); goto try_again; } if (pieces.data_size > il->hw_params.max_data_size) { - IL_ERR("uCode data len %Zd too large to fit in\n", + IL_ERR("uCode data len %zd too large to fit in\n", pieces.data_size); goto try_again; } if (pieces.init_size > il->hw_params.max_inst_size) { - IL_ERR("uCode init instr len %Zd too large to fit in\n", + IL_ERR("uCode init instr len %zd too large to fit in\n", pieces.init_size); goto try_again; } if (pieces.init_data_size > il->hw_params.max_data_size) { - IL_ERR("uCode init data len %Zd too large to fit in\n", + IL_ERR("uCode init data len %zd too large to fit in\n", pieces.init_data_size); goto try_again; } if (pieces.boot_size > il->hw_params.max_bsm_size) { - IL_ERR("uCode boot instr len %Zd too large to fit in\n", + IL_ERR("uCode boot instr len %zd too large to fit in\n", pieces.boot_size); goto try_again; } @@ -4938,7 +4938,7 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) /* Copy images into buffers for card's bus-master reads ... */ /* Runtime instructions (first block of data in file) */ - D_INFO("Copying (but not loading) uCode instr len %Zd\n", + D_INFO("Copying (but not loading) uCode instr len %zd\n", pieces.inst_size); memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size); @@ -4949,28 +4949,28 @@ il4965_ucode_callback(const struct firmware *ucode_raw, void *context) * Runtime data * NOTE: Copy into backup buffer will be done in il_up() */ - D_INFO("Copying (but not loading) uCode data len %Zd\n", + D_INFO("Copying (but not loading) uCode data len %zd\n", pieces.data_size); memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size); memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size); /* Initialization instructions */ if (pieces.init_size) { - D_INFO("Copying (but not loading) init instr len %Zd\n", + D_INFO("Copying (but not loading) init instr len %zd\n", pieces.init_size); memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size); } /* Initialization data */ if (pieces.init_data_size) { - D_INFO("Copying (but not loading) init data len %Zd\n", + D_INFO("Copying (but not loading) init data len %zd\n", pieces.init_data_size); memcpy(il->ucode_init_data.v_addr, pieces.init_data, pieces.init_data_size); } /* Bootstrap instructions */ - D_INFO("Copying (but not loading) boot instr len %Zd\n", + D_INFO("Copying (but not loading) boot instr len %zd\n", pieces.boot_size); memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c index 0e0293d42b5d..be466a074c1d 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c @@ -1141,21 +1141,21 @@ static int validate_sec_sizes(struct iwl_drv *drv, struct iwl_firmware_pieces *pieces, const struct iwl_cfg *cfg) { - IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr runtime inst size = %zd\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr runtime data size = %zd\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); - IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr init inst size = %zd\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); - IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %Zd\n", + IWL_DEBUG_INFO(drv, "f/w package hdr init data size = %zd\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA)); /* Verify that uCode images will fit in card's SRAM. */ if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST) > cfg->max_inst_size) { - IWL_ERR(drv, "uCode instr len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode instr len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_INST)); return -1; @@ -1163,7 +1163,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA) > cfg->max_data_size) { - IWL_ERR(drv, "uCode data len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode data len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); return -1; @@ -1171,7 +1171,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST) > cfg->max_inst_size) { - IWL_ERR(drv, "uCode init instr len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode init instr len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_INST)); return -1; @@ -1179,7 +1179,7 @@ static int validate_sec_sizes(struct iwl_drv *drv, if (get_sec_size(pieces, IWL_UCODE_INIT, IWL_UCODE_SECTION_DATA) > cfg->max_data_size) { - IWL_ERR(drv, "uCode init data len %Zd too large to fit in\n", + IWL_ERR(drv, "uCode init data len %zd too large to fit in\n", get_sec_size(pieces, IWL_UCODE_REGULAR, IWL_UCODE_SECTION_DATA)); return -1; diff --git a/drivers/net/wireless/marvell/mwifiex/wmm.c b/drivers/net/wireless/marvell/mwifiex/wmm.c index 28c2f6fae3e6..e4ff3b973850 100644 --- a/drivers/net/wireless/marvell/mwifiex/wmm.c +++ b/drivers/net/wireless/marvell/mwifiex/wmm.c @@ -673,8 +673,8 @@ void mwifiex_update_ralist_tx_pause(struct mwifiex_private *priv, u8 *mac, spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); } -/* This function update non-tdls peer ralist tx_pause while - * tdls channel swithing +/* This function updates non-tdls peer ralist tx_pause while + * tdls channel switching */ void mwifiex_update_ralist_tx_pause_in_tdls_cs(struct mwifiex_private *priv, u8 *mac, u8 tx_pause) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c index 1922e78ad6bd..89a0a28b8b20 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c @@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen, u8 i = 0; do { - /* 8 - Byte aligment */ + /* 8 - Byte alignment */ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); /* Buffer length is not enough */ @@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len) u8 i = 0; do { - /* 8 - Byte aligment */ + /* 8 - Byte alignment */ len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); /* Buffer length is not enough */ diff --git a/drivers/net/wireless/rsi/rsi_91x_usb.c b/drivers/net/wireless/rsi/rsi_91x_usb.c index ef5d394f185b..cc8deecea8cb 100644 --- a/drivers/net/wireless/rsi/rsi_91x_usb.c +++ b/drivers/net/wireless/rsi/rsi_91x_usb.c @@ -516,7 +516,7 @@ err: /** * rsi_disconnect() - This function performs the reverse of the probe function, - * it deintialize the driver structure. + * it deinitialize the driver structure. * @pfunction: Pointer to the USB interface structure. * * Return: None. diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 5bdf7a03e3dd..d1aa3eee0e81 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -178,7 +178,7 @@ static struct wlcore_conf wl18xx_conf = { .sg = { .params = { [WL18XX_CONF_SG_PARAM_0] = 0, - /* Configuartion Parameters */ + /* Configuration Parameters */ [WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0, [WL18XX_CONF_SG_ZIGBEE_COEX] = 0, [WL18XX_CONF_SG_TIME_SYNC] = 0, diff --git a/drivers/net/wireless/ti/wlcore/init.c b/drivers/net/wireless/ti/wlcore/init.c index d0b7734030ef..58898b99d3f7 100644 --- a/drivers/net/wireless/ti/wlcore/init.c +++ b/drivers/net/wireless/ti/wlcore/init.c @@ -544,7 +544,7 @@ static int wl12xx_init_sta_role(struct wl1271 *wl, struct wl12xx_vif *wlvif) return 0; } -/* vif-specific intialization */ +/* vif-specific initialization */ static int wl12xx_init_ap_role(struct wl1271 *wl, struct wl12xx_vif *wlvif) { int ret; |