Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 293 insertions, 0 deletions

diff --git a/drivers/parport/parport_amiga.c b/drivers/parport/parport_amiga.c
new file mode 100644
index 000000000000..5126e74ac2ec
--- /dev/null
+++ b/drivers/parport/parport_amiga.c
@@ -0,0 +1,293 @@
+/* Low-level parallel port routines for the Amiga built-in port
+ *
+ * Author: Joerg Dorchain <joerg@dorchain.net>
+ *
+ * This is a complete rewrite of the code, but based heaviy upon the old
+ * lp_intern. code.
+ *
+ * The built-in Amiga parallel port provides one port at a fixed address
+ * with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
+ * lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
+ * in hardware when the data register is accessed), and 1 input control line
+ * /ACK, able to cause an interrupt, but both not directly settable by
+ * software.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/parport.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <asm/setup.h>
+#include <asm/amigahw.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/amigaints.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DPRINTK printk
+#else
+#define DPRINTK(x...)	do { } while (0)
+#endif
+
+static struct parport *this_port = NULL;
+
+static void amiga_write_data(struct parport *p, unsigned char data)
+{
+	DPRINTK(KERN_DEBUG "write_data %c\n",data);
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	ciaa.prb = data;
+	mb();
+}
+
+static unsigned char amiga_read_data(struct parport *p)
+{
+	/* Triggers also /STROBE. This behavior cannot be changed */
+	return ciaa.prb;
+}
+
+#if 0
+static unsigned char control_pc_to_amiga(unsigned char control)
+{
+	unsigned char ret = 0;
+
+	if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
+		;
+	if (control & PARPORT_CONTROL_INIT) /* INITP */
+		/* reset connected to cpu reset pin */;
+	if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
+		/* Not connected */;
+	if (control & PARPORT_CONTROL_STROBE) /* Strobe */
+		/* Handled only directly by hardware */;
+	return ret;
+}
+#endif
+
+static unsigned char control_amiga_to_pc(unsigned char control)
+{
+	return PARPORT_CONTROL_SELECT |
+	      PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
+	/* fake value: interrupt enable, select in, no reset,
+	no autolf, no strobe - seems to be closest the wiring diagram */
+}
+
+static void amiga_write_control(struct parport *p, unsigned char control)
+{
+	DPRINTK(KERN_DEBUG "write_control %02x\n",control);
+	/* No implementation possible */
+}
+	
+static unsigned char amiga_read_control( struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "read_control \n");
+	return control_amiga_to_pc(0);
+}
+
+static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
+{
+	unsigned char old;
+
+	DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
+	old = amiga_read_control(p);
+	amiga_write_control(p, (old & ~mask) ^ val);
+	return old;
+}
+
+#if 0 /* currently unused */
+static unsigned char status_pc_to_amiga(unsigned char status)
+{
+	unsigned char ret = 1;
+
+	if (status & PARPORT_STATUS_BUSY) /* Busy */
+		ret &= ~1;
+	if (status & PARPORT_STATUS_ACK) /* Ack */
+		/* handled in hardware */;
+	if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
+		ret |= 2;
+	if (status & PARPORT_STATUS_SELECT) /* select */
+		ret |= 4;
+	if (status & PARPORT_STATUS_ERROR) /* error */
+		/* not connected */;
+	return ret;
+}
+#endif
+
+static unsigned char status_amiga_to_pc(unsigned char status)
+{
+	unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
+
+	if (status & 1) /* Busy */
+		ret &= ~PARPORT_STATUS_BUSY;
+	if (status & 2) /* PaperOut */
+		ret |= PARPORT_STATUS_PAPEROUT;
+	if (status & 4) /* Selected */
+		ret |= PARPORT_STATUS_SELECT;
+	/* the rest is not connected or handled autonomously in hardware */
+
+	return ret;
+}
+
+static unsigned char amiga_read_status(struct parport *p)
+{
+	unsigned char status;
+
+	status = status_amiga_to_pc(ciab.pra & 7);
+	DPRINTK(KERN_DEBUG "read_status %02x\n", status);
+	return status;
+}
+
+/* as this ports irq handling is already done, we use a generic funktion */
+static irqreturn_t amiga_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	parport_generic_irq(irq, (struct parport *) dev_id, regs);
+	return IRQ_HANDLED;
+}
+
+static void amiga_enable_irq(struct parport *p)
+{
+	enable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_disable_irq(struct parport *p)
+{
+	disable_irq(IRQ_AMIGA_CIAA_FLG);
+}
+
+static void amiga_data_forward(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "forward\n");
+	ciaa.ddrb = 0xff; /* all pins output */
+	mb();
+}
+
+static void amiga_data_reverse(struct parport *p)
+{
+	DPRINTK(KERN_DEBUG "reverse\n");
+	ciaa.ddrb = 0; /* all pins input */
+	mb();
+}
+
+static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
+{
+	s->u.amiga.data = 0;
+	s->u.amiga.datadir = 255;
+	s->u.amiga.status = 0;
+	s->u.amiga.statusdir = 0;
+}
+
+static void amiga_save_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	s->u.amiga.data = ciaa.prb;
+	s->u.amiga.datadir = ciaa.ddrb;
+	s->u.amiga.status = ciab.pra & 7;
+	s->u.amiga.statusdir = ciab.ddra & 7;
+	mb();
+}
+
+static void amiga_restore_state(struct parport *p, struct parport_state *s)
+{
+	mb();
+	ciaa.prb = s->u.amiga.data;
+	ciaa.ddrb = s->u.amiga.datadir;
+	ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
+	ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
+	mb();
+}
+
+static struct parport_operations pp_amiga_ops = {
+	.write_data	= amiga_write_data,
+	.read_data	= amiga_read_data,
+
+	.write_control	= amiga_write_control,
+	.read_control	= amiga_read_control,
+	.frob_control	= amiga_frob_control,
+
+	.read_status	= amiga_read_status,
+
+	.enable_irq	= amiga_enable_irq,
+	.disable_irq	= amiga_disable_irq,
+
+	.data_forward	= amiga_data_forward,
+	.data_reverse	= amiga_data_reverse,
+
+	.init_state	= amiga_init_state,
+	.save_state	= amiga_save_state,
+	.restore_state	= amiga_restore_state,
+
+	.epp_write_data	= parport_ieee1284_epp_write_data,
+	.epp_read_data	= parport_ieee1284_epp_read_data,
+	.epp_write_addr	= parport_ieee1284_epp_write_addr,
+	.epp_read_addr	= parport_ieee1284_epp_read_addr,
+
+	.ecp_write_data	= parport_ieee1284_ecp_write_data,
+	.ecp_read_data	= parport_ieee1284_ecp_read_data,
+	.ecp_write_addr	= parport_ieee1284_ecp_write_addr,
+
+	.compat_write_data	= parport_ieee1284_write_compat,
+	.nibble_read_data	= parport_ieee1284_read_nibble,
+	.byte_read_data		= parport_ieee1284_read_byte,
+
+	.owner		= THIS_MODULE,
+};
+
+/* ----------- Initialisation code --------------------------------- */
+
+static int __init parport_amiga_init(void)
+{
+	struct parport *p;
+	int err;
+
+	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
+		return -ENODEV;
+
+	err = -EBUSY;
+	if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
+		goto out_mem;
+
+	ciaa.ddrb = 0xff;
+	ciab.ddra &= 0xf8;
+	mb();
+
+	p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
+				   PARPORT_DMA_NONE, &pp_amiga_ops);
+	if (!p)
+		goto out_port;
+
+	err = request_irq(IRQ_AMIGA_CIAA_FLG, amiga_interrupt, 0, p->name, p);
+	if (err)
+		goto out_irq;
+
+	this_port = p;
+	printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
+	/* XXX: set operating mode */
+	parport_announce_port(p);
+
+	return 0;
+
+out_irq:
+	parport_put_port(p);
+out_port:
+	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+out_mem:
+	return err;
+}
+
+static void __exit parport_amiga_exit(void)
+{
+	parport_remove_port(this_port);
+	if (this_port->irq != PARPORT_IRQ_NONE)
+		free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
+	parport_put_port(this_port);
+	release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
+}
+
+
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
+MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
+MODULE_LICENSE("GPL");
+
+module_init(parport_amiga_init)
+module_exit(parport_amiga_exit)