Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

1 files changed, 0 insertions, 321 deletions

diff --git a/drivers/staging/media/solo6x10/core.c b/drivers/staging/media/solo6x10/core.c
deleted file mode 100644
index fd83d6d028bf..000000000000
--- a/drivers/staging/media/solo6x10/core.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2010 Bluecherry, LLC www.bluecherrydvr.com
- * Copyright (C) 2010 Ben Collins <bcollins@bluecherry.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/videodev2.h>
-#include "solo6x10.h"
-#include "tw28.h"
-
-MODULE_DESCRIPTION("Softlogic 6x10 MP4/H.264 Encoder/Decoder V4L2/ALSA Driver");
-MODULE_AUTHOR("Ben Collins <bcollins@bluecherry.net>");
-MODULE_VERSION(SOLO6X10_VERSION);
-MODULE_LICENSE("GPL");
-
-void solo_irq_on(struct solo_dev *solo_dev, u32 mask)
-{
-	solo_dev->irq_mask |= mask;
-	solo_reg_write(solo_dev, SOLO_IRQ_ENABLE, solo_dev->irq_mask);
-}
-
-void solo_irq_off(struct solo_dev *solo_dev, u32 mask)
-{
-	solo_dev->irq_mask &= ~mask;
-	solo_reg_write(solo_dev, SOLO_IRQ_ENABLE, solo_dev->irq_mask);
-}
-
-/* XXX We should check the return value of the sub-device ISR's */
-static irqreturn_t solo_isr(int irq, void *data)
-{
-	struct solo_dev *solo_dev = data;
-	u32 status;
-	int i;
-
-	status = solo_reg_read(solo_dev, SOLO_IRQ_STAT);
-	if (!status)
-		return IRQ_NONE;
-
-	if (status & ~solo_dev->irq_mask) {
-		solo_reg_write(solo_dev, SOLO_IRQ_STAT,
-			       status & ~solo_dev->irq_mask);
-		status &= solo_dev->irq_mask;
-	}
-
-	if (status & SOLO_IRQ_PCI_ERR) {
-		u32 err = solo_reg_read(solo_dev, SOLO_PCI_ERR);
-		solo_p2m_error_isr(solo_dev, err);
-		solo_reg_write(solo_dev, SOLO_IRQ_STAT, SOLO_IRQ_PCI_ERR);
-	}
-
-	for (i = 0; i < SOLO_NR_P2M; i++)
-		if (status & SOLO_IRQ_P2M(i))
-			solo_p2m_isr(solo_dev, i);
-
-	if (status & SOLO_IRQ_IIC)
-		solo_i2c_isr(solo_dev);
-
-	if (status & SOLO_IRQ_VIDEO_IN)
-		solo_video_in_isr(solo_dev);
-
-	/* Call this first so enc gets detected flag set */
-	if (status & SOLO_IRQ_MOTION)
-		solo_motion_isr(solo_dev);
-
-	if (status & SOLO_IRQ_ENCODER)
-		solo_enc_v4l2_isr(solo_dev);
-
-	if (status & SOLO_IRQ_G723)
-		solo_g723_isr(solo_dev);
-
-	return IRQ_HANDLED;
-}
-
-static void free_solo_dev(struct solo_dev *solo_dev)
-{
-	struct pci_dev *pdev;
-
-	if (!solo_dev)
-		return;
-
-	pdev = solo_dev->pdev;
-
-	/* If we never initialized the PCI device, then nothing else
-	 * below here needs cleanup */
-	if (!pdev) {
-		kfree(solo_dev);
-		return;
-	}
-
-	/* Bring down the sub-devices first */
-	solo_g723_exit(solo_dev);
-	solo_enc_v4l2_exit(solo_dev);
-	solo_enc_exit(solo_dev);
-	solo_v4l2_exit(solo_dev);
-	solo_disp_exit(solo_dev);
-	solo_gpio_exit(solo_dev);
-	solo_p2m_exit(solo_dev);
-	solo_i2c_exit(solo_dev);
-
-	/* Now cleanup the PCI device */
-	if (solo_dev->reg_base) {
-		solo_irq_off(solo_dev, ~0);
-		pci_iounmap(pdev, solo_dev->reg_base);
-		free_irq(pdev->irq, solo_dev);
-	}
-
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-	pci_set_drvdata(pdev, NULL);
-
-	kfree(solo_dev);
-}
-
-static int solo_pci_probe(struct pci_dev *pdev,
-				    const struct pci_device_id *id)
-{
-	struct solo_dev *solo_dev;
-	int ret;
-	int sdram;
-	u8 chip_id;
-	u32 reg;
-
-	solo_dev = kzalloc(sizeof(*solo_dev), GFP_KERNEL);
-	if (solo_dev == NULL)
-		return -ENOMEM;
-
-	solo_dev->pdev = pdev;
-	spin_lock_init(&solo_dev->reg_io_lock);
-	pci_set_drvdata(pdev, solo_dev);
-
-	ret = pci_enable_device(pdev);
-	if (ret)
-		goto fail_probe;
-
-	pci_set_master(pdev);
-
-	ret = pci_request_regions(pdev, SOLO6X10_NAME);
-	if (ret)
-		goto fail_probe;
-
-	solo_dev->reg_base = pci_ioremap_bar(pdev, 0);
-	if (solo_dev->reg_base == NULL) {
-		ret = -ENOMEM;
-		goto fail_probe;
-	}
-
-	chip_id = solo_reg_read(solo_dev, SOLO_CHIP_OPTION) &
-					SOLO_CHIP_ID_MASK;
-	switch (chip_id) {
-	case 7:
-		solo_dev->nr_chans = 16;
-		solo_dev->nr_ext = 5;
-		break;
-	case 6:
-		solo_dev->nr_chans = 8;
-		solo_dev->nr_ext = 2;
-		break;
-	default:
-		dev_warn(&pdev->dev, "Invalid chip_id 0x%02x, "
-			 "defaulting to 4 channels\n",
-			 chip_id);
-	case 5:
-		solo_dev->nr_chans = 4;
-		solo_dev->nr_ext = 1;
-	}
-
-	solo_dev->flags = id->driver_data;
-
-	/* Disable all interrupts to start */
-	solo_irq_off(solo_dev, ~0);
-
-	reg = SOLO_SYS_CFG_SDRAM64BIT;
-	/* Initial global settings */
-	if (!(solo_dev->flags & FLAGS_6110))
-		reg |= SOLO6010_SYS_CFG_INPUTDIV(25) |
-			SOLO6010_SYS_CFG_FEEDBACKDIV((SOLO_CLOCK_MHZ * 2) - 2) |
-			SOLO6010_SYS_CFG_OUTDIV(3);
-	solo_reg_write(solo_dev, SOLO_SYS_CFG, reg);
-
-	if (solo_dev->flags & FLAGS_6110) {
-		u32 sys_clock_MHz = SOLO_CLOCK_MHZ;
-		u32 pll_DIVQ;
-		u32 pll_DIVF;
-
-		if (sys_clock_MHz < 125) {
-			pll_DIVQ = 3;
-			pll_DIVF = (sys_clock_MHz * 4) / 3;
-		} else {
-			pll_DIVQ = 2;
-			pll_DIVF = (sys_clock_MHz * 2) / 3;
-		}
-
-		solo_reg_write(solo_dev, SOLO6110_PLL_CONFIG,
-			       SOLO6110_PLL_RANGE_5_10MHZ |
-			       SOLO6110_PLL_DIVR(9) |
-			       SOLO6110_PLL_DIVQ_EXP(pll_DIVQ) |
-			       SOLO6110_PLL_DIVF(pll_DIVF) | SOLO6110_PLL_FSEN);
-		mdelay(1);      /* PLL Locking time (1ms) */
-
-		solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 3 << 8); /* ? */
-	} else
-		solo_reg_write(solo_dev, SOLO_DMA_CTRL1, 1 << 8); /* ? */
-
-	solo_reg_write(solo_dev, SOLO_TIMER_CLOCK_NUM, SOLO_CLOCK_MHZ - 1);
-
-	/* PLL locking time of 1ms */
-	mdelay(1);
-
-	ret = request_irq(pdev->irq, solo_isr, IRQF_SHARED, SOLO6X10_NAME,
-			  solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	/* Handle this from the start */
-	solo_irq_on(solo_dev, SOLO_IRQ_PCI_ERR);
-
-	ret = solo_i2c_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	/* Setup the DMA engine */
-	sdram = (solo_dev->nr_chans >= 8) ? 2 : 1;
-	solo_reg_write(solo_dev, SOLO_DMA_CTRL,
-		       SOLO_DMA_CTRL_REFRESH_CYCLE(1) |
-		       SOLO_DMA_CTRL_SDRAM_SIZE(sdram) |
-		       SOLO_DMA_CTRL_SDRAM_CLK_INVERT |
-		       SOLO_DMA_CTRL_READ_CLK_SELECT |
-		       SOLO_DMA_CTRL_LATENCY(1));
-
-	ret = solo_p2m_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_disp_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_gpio_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_tw28_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_v4l2_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_enc_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_enc_v4l2_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	ret = solo_g723_init(solo_dev);
-	if (ret)
-		goto fail_probe;
-
-	return 0;
-
-fail_probe:
-	free_solo_dev(solo_dev);
-	return ret;
-}
-
-static void solo_pci_remove(struct pci_dev *pdev)
-{
-	struct solo_dev *solo_dev = pci_get_drvdata(pdev);
-
-	free_solo_dev(solo_dev);
-}
-
-static struct pci_device_id solo_id_table[] = {
-	/* 6010 based cards */
-	{PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6010)},
-	{PCI_DEVICE(PCI_VENDOR_ID_SOFTLOGIC, PCI_DEVICE_ID_SOLO6110),
-	 .driver_data = FLAGS_6110},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_4)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_9)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_NEUSOLO_16)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_4)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_9)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_SOLO_16)},
-	/* 6110 based cards */
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_4)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_8)},
-	{PCI_DEVICE(PCI_VENDOR_ID_BLUECHERRY, PCI_DEVICE_ID_BC_6110_16)},
-	{0,}
-};
-
-MODULE_DEVICE_TABLE(pci, solo_id_table);
-
-static struct pci_driver solo_pci_driver = {
-	.name = SOLO6X10_NAME,
-	.id_table = solo_id_table,
-	.probe = solo_pci_probe,
-	.remove = solo_pci_remove,
-};
-
-module_pci_driver(solo_pci_driver);