Merge tag 'usb-for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.9 merge window

This time around we have 92 non-merge commits. Most
of the changes are in drivers/usb/gadget (40.3%)
with drivers/usb/gadget/function being the most
active directory (27.2%).

As for UDC drivers, only dwc3 (26.5%) and dwc2
(12.7%) have really been active.

The most important changes for dwc3 are better
support for scatterlist and, again, throughput
improvements. While on dwc2 got some minor stability
fixes related to soft reset and FIFO usage.

Felipe Tonello has done some good work fixing up our
f_midi gadget and Tal Shorer has implemented a nice
API change for our ULPI bus.

Apart from these, we have our usual set of
non-critical fixes, spelling fixes, build warning
fixes, etc.

4 files changed, 128 insertions, 9 deletions

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 40c04bb25f2f..9483489080f6 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -107,10 +107,8 @@ int usb_ep_enable(struct usb_ep *ep)
 		goto out;
 
 	ret = ep->ops->enable(ep, ep->desc);
-	if (ret) {
-		ret = ret;
+	if (ret)
 		goto out;
-	}
 
 	ep->enabled = true;
 
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 1400415fe67a..5107987bd353 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -1838,6 +1838,8 @@ static int goku_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 err:
 	if (dev)
 		goku_remove (pdev);
+	/* gadget_release is not registered yet, kfree explicitly */
+	kfree(dev);
 	return retval;
 }
 
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 614ab951a4ae..61c938c36d88 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -589,7 +589,7 @@ static void net2280_free_request(struct usb_ep *_ep, struct usb_request *_req)
 
 	ep = container_of(_ep, struct net2280_ep, ep);
 	if (!_ep || !_req) {
-		dev_err(&ep->dev->pdev->dev, "%s: Inavlid ep=%p or req=%p\n",
+		dev_err(&ep->dev->pdev->dev, "%s: Invalid ep=%p or req=%p\n",
 							__func__, _ep, _req);
 		return;
 	}
@@ -1137,8 +1137,10 @@ dma_done(struct net2280_ep *ep,	struct net2280_request *req, u32 dmacount,
 	done(ep, req, status);
 }
 
-static void scan_dma_completions(struct net2280_ep *ep)
+static int scan_dma_completions(struct net2280_ep *ep)
 {
+	int num_completed = 0;
+
 	/* only look at descriptors that were "naturally" retired,
 	 * so fifo and list head state won't matter
 	 */
@@ -1166,6 +1168,7 @@ static void scan_dma_completions(struct net2280_ep *ep)
 				break;
 			/* single transfer mode */
 			dma_done(ep, req, tmp, 0);
+			num_completed++;
 			break;
 		} else if (!ep->is_in &&
 			   (req->req.length % ep->ep.maxpacket) &&
@@ -1194,7 +1197,10 @@ static void scan_dma_completions(struct net2280_ep *ep)
 			}
 		}
 		dma_done(ep, req, tmp, 0);
+		num_completed++;
 	}
+
+	return num_completed;
 }
 
 static void restart_dma(struct net2280_ep *ep)
@@ -1567,6 +1573,44 @@ static struct usb_ep *net2280_match_ep(struct usb_gadget *_gadget,
 			return ep;
 	}
 
+	/* USB3380: Only first four endpoints have DMA channels. Allocate
+	 * slower interrupt endpoints from PIO hw endpoints, to allow bulk/isoc
+	 * endpoints use DMA hw endpoints.
+	 */
+	if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+	    usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep2in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep4in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT &&
+		   !usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep1out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep3out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+		   usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep1in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep3in");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	} else if (usb_endpoint_type(desc) != USB_ENDPOINT_XFER_BULK &&
+		   !usb_endpoint_dir_in(desc)) {
+		ep = gadget_find_ep_by_name(_gadget, "ep2out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+		ep = gadget_find_ep_by_name(_gadget, "ep4out");
+		if (ep && usb_gadget_ep_match_desc(_gadget, ep, desc, ep_comp))
+			return ep;
+	}
+
 	/* USB3380: use same address for usb and hardware endpoints */
 	snprintf(name, sizeof(name), "ep%d%s", usb_endpoint_num(desc),
 			usb_endpoint_dir_in(desc) ? "in" : "out");
@@ -2547,8 +2591,11 @@ static void handle_ep_small(struct net2280_ep *ep)
 	/* manual DMA queue advance after short OUT */
 	if (likely(ep->dma)) {
 		if (t & BIT(SHORT_PACKET_TRANSFERRED_INTERRUPT)) {
-			u32	count;
+			struct net2280_request *stuck_req = NULL;
 			int	stopped = ep->stopped;
+			int	num_completed;
+			int	stuck = 0;
+			u32	count;
 
 			/* TRANSFERRED works around OUT_DONE erratum 0112.
 			 * we expect (N <= maxpacket) bytes; host wrote M.
@@ -2560,7 +2607,7 @@ static void handle_ep_small(struct net2280_ep *ep)
 				/* any preceding dma transfers must finish.
 				 * dma handles (M >= N), may empty the queue
 				 */
-				scan_dma_completions(ep);
+				num_completed = scan_dma_completions(ep);
 				if (unlikely(list_empty(&ep->queue) ||
 						ep->out_overflow)) {
 					req = NULL;
@@ -2580,6 +2627,31 @@ static void handle_ep_small(struct net2280_ep *ep)
 						req = NULL;
 					break;
 				}
+
+				/* Escape loop if no dma transfers completed
+				 * after few retries.
+				 */
+				if (num_completed == 0) {
+					if (stuck_req == req &&
+					    readl(&ep->dma->dmadesc) !=
+						  req->td_dma && stuck++ > 5) {
+						count = readl(
+							&ep->dma->dmacount);
+						count &= DMA_BYTE_COUNT_MASK;
+						req = NULL;
+						ep_dbg(ep->dev, "%s escape stuck %d, count %u\n",
+							ep->ep.name, stuck,
+							count);
+						break;
+					} else if (stuck_req != req) {
+						stuck_req = req;
+						stuck = 0;
+					}
+				} else {
+					stuck_req = NULL;
+					stuck = 0;
+				}
+
 				udelay(1);
 			}
 
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index ad140aa00132..7fa60f5b7ae4 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -33,6 +33,7 @@
 #include <linux/usb.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
 
 #include "pxa27x_udc.h"
 
@@ -1655,6 +1656,37 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	return -EOPNOTSUPP;
 }
 
+/**
+ * pxa_udc_phy_event - Called by phy upon VBus event
+ * @nb: notifier block
+ * @action: phy action, is vbus connect or disconnect
+ * @data: the usb_gadget structure in pxa_udc
+ *
+ * Called by the USB Phy when a cable connect or disconnect is sensed.
+ *
+ * Returns 0
+ */
+static int pxa_udc_phy_event(struct notifier_block *nb, unsigned long action,
+			     void *data)
+{
+	struct usb_gadget *gadget = data;
+
+	switch (action) {
+	case USB_EVENT_VBUS:
+		usb_gadget_vbus_connect(gadget);
+		return NOTIFY_OK;
+	case USB_EVENT_NONE:
+		usb_gadget_vbus_disconnect(gadget);
+		return NOTIFY_OK;
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static struct notifier_block pxa27x_udc_phy = {
+	.notifier_call = pxa_udc_phy_event,
+};
+
 static int pxa27x_udc_start(struct usb_gadget *g,
 		struct usb_gadget_driver *driver);
 static int pxa27x_udc_stop(struct usb_gadget *g);
@@ -2432,7 +2464,14 @@ static int pxa_udc_probe(struct platform_device *pdev)
 		return udc->irq;
 
 	udc->dev = &pdev->dev;
-	udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (of_have_populated_dt()) {
+		udc->transceiver =
+			devm_usb_get_phy_by_phandle(udc->dev, "phys", 0);
+		if (IS_ERR(udc->transceiver))
+			return PTR_ERR(udc->transceiver);
+	} else {
+		udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+	}
 
 	if (IS_ERR(udc->gpiod)) {
 		dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n",
@@ -2465,14 +2504,20 @@ static int pxa_udc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		usb_register_notifier(udc->transceiver, &pxa27x_udc_phy);
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
-		goto err;
+		goto err_add_gadget;
 
 	pxa_init_debugfs(udc);
 	if (should_enable_udc(udc))
 		udc_enable(udc);
 	return 0;
+
+err_add_gadget:
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
 err:
 	clk_unprepare(udc->clk);
 	return retval;
@@ -2489,6 +2534,8 @@ static int pxa_udc_remove(struct platform_device *_dev)
 	usb_del_gadget_udc(&udc->gadget);
 	pxa_cleanup_debugfs(udc);
 
+	if (!IS_ERR_OR_NULL(udc->transceiver))
+		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
 	usb_put_phy(udc->transceiver);
 
 	udc->transceiver = NULL;