usb: xhci: fix xhci locking up during hcd remove

[ Upstream commit ad6b1d914a9e07f3b9a9ae3396f3c840d0070539 ]

The problem seems to be that if a new device is detected
while we have already removed the shared HCD, then many of the
xhci operations (e.g.  xhci_alloc_dev(), xhci_setup_device())
hang as command never completes.

I don't think XHCI can operate without the shared HCD as we've
already called xhci_halt() in xhci_only_stop_hcd() when shared HCD
goes away. We need to prevent new commands from being queued
not only when HCD is dying but also when HCD is halted.

The following lockup was detected while testing the otg state
machine.

[  178.199951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  178.205799] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[  178.214458] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010
[  178.223619] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000
[  178.230677] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  178.237796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  178.245358] usb usb1: Product: xHCI Host Controller
[  178.250483] usb usb1: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd
[  178.257783] usb usb1: SerialNumber: xhci-hcd.0.auto
[  178.267014] hub 1-0:1.0: USB hub found
[  178.272108] hub 1-0:1.0: 1 port detected
[  178.278371] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[  178.284171] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[  178.294038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[  178.301183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  178.308776] usb usb2: Product: xHCI Host Controller
[  178.313902] usb usb2: Manufacturer: Linux 4.0.0-rc1-00024-g6111320 xhci-hcd
[  178.321222] usb usb2: SerialNumber: xhci-hcd.0.auto
[  178.329061] hub 2-0:1.0: USB hub found
[  178.333126] hub 2-0:1.0: 1 port detected
[  178.567585] dwc3 48890000.usb: usb_otg_start_host 0
[  178.572707] xhci-hcd xhci-hcd.0.auto: remove, state 4
[  178.578064] usb usb2: USB disconnect, device number 1
[  178.586565] xhci-hcd xhci-hcd.0.auto: USB bus 2 deregistered
[  178.592585] xhci-hcd xhci-hcd.0.auto: remove, state 1
[  178.597924] usb usb1: USB disconnect, device number 1
[  178.603248] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[  190.597337] INFO: task kworker/u4:0:6 blocked for more than 10 seconds.
[  190.604273]       Not tainted 4.0.0-rc1-00024-g6111320 #1058
[  190.610228] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  190.618443] kworker/u4:0    D c05c0ac0     0     6      2 0x00000000
[  190.625120] Workqueue: usb_otg usb_otg_work
[  190.629533] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98)
[  190.636915] [<c05c10ac>] (schedule) from [<c05c1318>] (schedule_preempt_disabled+0xc/0x10)
[  190.645591] [<c05c1318>] (schedule_preempt_disabled) from [<c05c23d0>] (mutex_lock_nested+0x1ac/0x3fc)
[  190.655353] [<c05c23d0>] (mutex_lock_nested) from [<c046cf8c>] (usb_disconnect+0x3c/0x208)
[  190.664043] [<c046cf8c>] (usb_disconnect) from [<c0470cf0>] (_usb_remove_hcd+0x98/0x1d8)
[  190.672535] [<c0470cf0>] (_usb_remove_hcd) from [<c0485da8>] (usb_otg_start_host+0x50/0xf4)
[  190.681299] [<c0485da8>] (usb_otg_start_host) from [<c04849a4>] (otg_set_protocol+0x5c/0xd0)
[  190.690153] [<c04849a4>] (otg_set_protocol) from [<c0484b88>] (otg_set_state+0x170/0xbfc)
[  190.698735] [<c0484b88>] (otg_set_state) from [<c0485740>] (otg_statemachine+0x12c/0x470)
[  190.707326] [<c0485740>] (otg_statemachine) from [<c0053c84>] (process_one_work+0x1b4/0x4a0)
[  190.716162] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c)
[  190.724742] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0)
[  190.732328] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24)
[  190.739898] 5 locks held by kworker/u4:0/6:
[  190.744274]  #0:  ("%s""usb_otg"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.752799]  #1:  ((&otgd->work)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.761326]  #2:  (&otgd->fsm.lock){+.+.+.}, at: [<c048562c>] otg_statemachine+0x18/0x470
[  190.769934]  #3:  (usb_bus_list_lock){+.+.+.}, at: [<c0470ce8>] _usb_remove_hcd+0x90/0x1d8
[  190.778635]  #4:  (&dev->mutex){......}, at: [<c046cf8c>] usb_disconnect+0x3c/0x208
[  190.786700] INFO: task kworker/1:0:14 blocked for more than 10 seconds.
[  190.793633]       Not tainted 4.0.0-rc1-00024-g6111320 #1058
[  190.799567] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  190.807783] kworker/1:0     D c05c0ac0     0    14      2 0x00000000
[  190.814457] Workqueue: usb_hub_wq hub_event
[  190.818866] [<c05c0ac0>] (__schedule) from [<c05c10ac>] (schedule+0x34/0x98)
[  190.826252] [<c05c10ac>] (schedule) from [<c05c4e40>] (schedule_timeout+0x13c/0x1ec)
[  190.834377] [<c05c4e40>] (schedule_timeout) from [<c05c19f0>] (wait_for_common+0xbc/0x150)
[  190.843062] [<c05c19f0>] (wait_for_common) from [<bf068a3c>] (xhci_setup_device+0x164/0x5cc [xhci_hcd])
[  190.852986] [<bf068a3c>] (xhci_setup_device [xhci_hcd]) from [<c046b7f4>] (hub_port_init+0x3f4/0xb10)
[  190.862667] [<c046b7f4>] (hub_port_init) from [<c046eb64>] (hub_event+0x704/0x1018)
[  190.870704] [<c046eb64>] (hub_event) from [<c0053c84>] (process_one_work+0x1b4/0x4a0)
[  190.878919] [<c0053c84>] (process_one_work) from [<c00540f8>] (worker_thread+0x154/0x44c)
[  190.887503] [<c00540f8>] (worker_thread) from [<c0058f88>] (kthread+0xd4/0xf0)
[  190.895076] [<c0058f88>] (kthread) from [<c000e810>] (ret_from_fork+0x14/0x24)
[  190.902650] 5 locks held by kworker/1:0/14:
[  190.907023]  #0:  ("usb_hub_wq"){.+.+.+}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.915454]  #1:  ((&hub->events)){+.+.+.}, at: [<c0053bf4>] process_one_work+0x124/0x4a0
[  190.924070]  #2:  (&dev->mutex){......}, at: [<c046e490>] hub_event+0x30/0x1018
[  190.931768]  #3:  (&port_dev->status_lock){+.+.+.}, at: [<c046eb50>] hub_event+0x6f0/0x1018
[  190.940558]  #4:  (&bus->usb_address0_mutex){+.+.+.}, at: [<c046b458>] hub_port_init+0x58/0xb10

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>

1 files changed, 4 insertions, 1 deletions

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index e6d858a49d04..2e437d61f7dd 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3823,8 +3823,11 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 {
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
 	int ret;
-	if (xhci->xhc_state & XHCI_STATE_DYING)
+
+	if (xhci->xhc_state) {
+		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
 		return -ESHUTDOWN;
+	}
 
 	if (!command_must_succeed)
 		reserved_trbs++;