summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-27 15:06:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-27 15:06:29 -0700
commit4e68af0b0694ac5f16d0c61a7682aa2d46348454 (patch)
treee7d2e319402217fe23025f473faf9c17fbe145b2 /drivers
parent7f2145b0d0e838f800f2b37761bd2e625014e09e (diff)
parent533169d164c6b4c8571d0d48779f6ff6be593d72 (diff)
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang: "I2C has some driver bugfixes, module autoload fixes, and driver enablement on some architectures" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: defer probe if bus recovery GPIOs are not ready i2c: designware: Avoid aborted transfers with fast reacting I2C slaves i2c: i801: Fix I2C Block Read on 8-Series/C220 and later i2c: xgene: Avoid dma_buffer overrun i2c: digicolor: Fix module autoload i2c: xlr: Fix module autoload for OF registration i2c: xlp9xx: Fix module autoload i2c: jz4780: Fix module autoload i2c: allow configuration of imx driver for ColdFire architecture i2c: mark device nodes only in case of successful instantiation i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings i2c: hix5hd2: allow build with ARCH_HISI
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig12
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c17
-rw-r--r--drivers/i2c/busses/i2c-digicolor.c1
-rw-r--r--drivers/i2c/busses/i2c-i801.c16
-rw-r--r--drivers/i2c/busses/i2c-imx.c11
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c1
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c2
-rw-r--r--drivers/i2c/busses/i2c-xgene-slimpro.c2
-rw-r--r--drivers/i2c/busses/i2c-xlp9xx.c1
-rw-r--r--drivers/i2c/busses/i2c-xlr.c1
-rw-r--r--drivers/i2c/i2c-core.c11
11 files changed, 57 insertions, 18 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6d94e2ec5b4f..d252276feadf 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -79,12 +79,12 @@ config I2C_AMD8111
config I2C_HIX5HD2
tristate "Hix5hd2 high-speed I2C driver"
- depends on ARCH_HIX5HD2 || COMPILE_TEST
+ depends on ARCH_HISI || ARCH_HIX5HD2 || COMPILE_TEST
help
- Say Y here to include support for high-speed I2C controller in the
- Hisilicon based hix5hd2 SoCs.
+ Say Y here to include support for the high-speed I2C controller
+ used in HiSilicon hix5hd2 SoCs.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called i2c-hix5hd2.
config I2C_I801
@@ -589,10 +589,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC || ARCH_LAYERSCAPE
+ depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC or Layerscape processors.
+ the Freescale i.MX/MXC, Layerscape or ColdFire processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 1fe93c43215c..11e866d05368 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -95,6 +95,9 @@
#define DW_IC_STATUS_TFE BIT(2)
#define DW_IC_STATUS_MST_ACTIVITY BIT(5)
+#define DW_IC_SDA_HOLD_RX_SHIFT 16
+#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
+
#define DW_IC_ERR_TX_ABRT 0x1
#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
@@ -420,12 +423,20 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* Configure SDA Hold Time if required */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
- if (dev->sda_hold_time) {
- dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- } else {
+ if (!dev->sda_hold_time) {
/* Keep previous hold time setting if no one set it */
dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
}
+ /*
+ * Workaround for avoiding TX arbitration lost in case I2C
+ * slave pulls SDA down "too quickly" after falling egde of
+ * SCL by enabling non-zero SDA RX hold. Specification says it
+ * extends incoming SDA low to high transition while SCL is
+ * high but it apprears to help also above issue.
+ */
+ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+ dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
} else {
dev_warn(dev->dev,
"Hardware too old to adjust SDA hold time.\n");
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 9604024e0eb0..49f2084f7bb5 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -368,6 +368,7 @@ static const struct of_device_id dc_i2c_match[] = {
{ .compatible = "cnxt,cx92755-i2c" },
{ },
};
+MODULE_DEVICE_TABLE(of, dc_i2c_match);
static struct platform_driver dc_i2c_driver = {
.probe = dc_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 08847e8b8998..eb3627f35d12 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -146,6 +146,7 @@
#define SMBHSTCFG_HST_EN 1
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
+#define SMBHSTCFG_SPD_WD 0x10
/* TCO configuration bits for TCOCTL */
#define TCOCTL_EN 0x0100
@@ -865,9 +866,16 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- /* NB: page 240 of ICH5 datasheet shows that the R/#W
- * bit should be cleared here, even when reading */
- outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ /*
+ * NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading.
+ * However if SPD Write Disable is set (Lynx Point and later),
+ * the read will fail if we don't set the R/#W bit.
+ */
+ outb_p(((addr & 0x7f) << 1) |
+ ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ?
+ (read_write & 0x01) : 0),
+ SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading */
@@ -1573,6 +1581,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Disable SMBus interrupt feature if SMBus using SMI# */
priv->features &= ~FEATURE_IRQ;
}
+ if (temp & SMBHSTCFG_SPD_WD)
+ dev_info(&dev->dev, "SPD Write Disable is set\n");
/* Clear special mode bits */
if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 592a8f26a708..47fc1f1acff7 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1009,10 +1009,13 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
- if (!gpio_is_valid(rinfo->sda_gpio) ||
- !gpio_is_valid(rinfo->scl_gpio) ||
- IS_ERR(i2c_imx->pinctrl_pins_default) ||
- IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
+ if (rinfo->sda_gpio == -EPROBE_DEFER ||
+ rinfo->scl_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (!gpio_is_valid(rinfo->sda_gpio) ||
+ !gpio_is_valid(rinfo->scl_gpio) ||
+ IS_ERR(i2c_imx->pinctrl_pins_default) ||
+ IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
return 0;
}
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index b8ea62105f42..30132c3957cd 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -729,6 +729,7 @@ static const struct of_device_id jz4780_i2c_of_matches[] = {
{ .compatible = "ingenic,jz4780-i2c", },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
static int jz4780_i2c_probe(struct platform_device *pdev)
{
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 50702c7bb244..df220666d627 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -694,6 +694,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
t_calc->div_low--;
t_calc->div_high--;
+ /* Give the tuning value 0, that would not update con register */
+ t_calc->tuning = 0;
/* Maximum divider supported by hw is 0xffff */
if (t_calc->div_low > 0xffff) {
t_calc->div_low = 0xffff;
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 263685c7a512..05cf192ef1ac 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -105,7 +105,7 @@ struct slimpro_i2c_dev {
struct mbox_chan *mbox_chan;
struct mbox_client mbox_client;
struct completion rd_complete;
- u8 dma_buffer[I2C_SMBUS_BLOCK_MAX];
+ u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
u32 *resp_msg;
};
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 2a972ed7aa0d..e29ff37a43bd 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -426,6 +426,7 @@ static const struct of_device_id xlp9xx_i2c_of_match[] = {
{ .compatible = "netlogic,xlp980-i2c", },
{ /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, xlp9xx_i2c_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 0968f59b6df5..ad17d88d8573 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -358,6 +358,7 @@ static const struct of_device_id xlr_i2c_dt_ids[] = {
},
{ }
};
+MODULE_DEVICE_TABLE(of, xlr_i2c_dt_ids);
static int xlr_i2c_probe(struct platform_device *pdev)
{
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5ab67219f71e..1704fc84d647 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1681,6 +1681,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
static void of_i2c_register_devices(struct i2c_adapter *adap)
{
struct device_node *bus, *node;
+ struct i2c_client *client;
/* Only register child devices if the adapter has a node pointer set */
if (!adap->dev.of_node)
@@ -1695,7 +1696,14 @@ static void of_i2c_register_devices(struct i2c_adapter *adap)
for_each_available_child_of_node(bus, node) {
if (of_node_test_and_set_flag(node, OF_POPULATED))
continue;
- of_i2c_register_device(adap, node);
+
+ client = of_i2c_register_device(adap, node);
+ if (IS_ERR(client)) {
+ dev_warn(&adap->dev,
+ "Failed to create I2C device for %s\n",
+ node->full_name);
+ of_node_clear_flag(node, OF_POPULATED);
+ }
}
of_node_put(bus);
@@ -2299,6 +2307,7 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
if (IS_ERR(client)) {
dev_err(&adap->dev, "failed to create client for '%s'\n",
rd->dn->full_name);
+ of_node_clear_flag(rd->dn, OF_POPULATED);
return notifier_from_errno(PTR_ERR(client));
}
break;