Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "There are three sets of updates for 5.18 in the asm-generic tree:

   - The set_fs()/get_fs() infrastructure gets removed for good.

     This was already gone from all major architectures, but now we can
     finally remove it everywhere, which loses some particularly tricky
     and error-prone code. There is a small merge conflict against a
     parisc cleanup, the solution is to use their new version.

   - The nds32 architecture ends its tenure in the Linux kernel.

     The hardware is still used and the code is in reasonable shape, but
     the mainline port is not actively maintained any more, as all
     remaining users are thought to run vendor kernels that would never
     be updated to a future release.

   - A series from Masahiro Yamada cleans up some of the uapi header
     files to pass the compile-time checks"

* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
  nds32: Remove the architecture
  uaccess: remove CONFIG_SET_FS
  ia64: remove CONFIG_SET_FS support
  sh: remove CONFIG_SET_FS support
  sparc64: remove CONFIG_SET_FS support
  lib/test_lockup: fix kernel pointer check for separate address spaces
  uaccess: generalize access_ok()
  uaccess: fix type mismatch warnings from access_ok()
  arm64: simplify access_ok()
  m68k: fix access_ok for coldfire
  MIPS: use simpler access_ok()
  MIPS: Handle address errors for accesses above CPU max virtual user address
  uaccess: add generic __{get,put}_kernel_nofault
  nios2: drop access_ok() check from __put_user()
  x86: use more conventional access_ok() definition
  x86: remove __range_not_ok()
  sparc64: add __{get,put}_kernel_nofault()
  nds32: fix access_ok() checks in get/put_user
  uaccess: fix nios2 and microblaze get_user_8()
  sparc64: fix building assembly files
  ...

9 files changed, 7 insertions, 447 deletions

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 1ea556e75494..1589ae7d5abb 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -617,15 +617,6 @@ config CLKSRC_ST_LPC
 	  Enable this option to use the Low Power controller timer
 	  as clocksource.
 
-config ATCPIT100_TIMER
-	bool "ATCPIT100 timer driver"
-	depends on NDS32 || COMPILE_TEST
-	depends on HAS_IOMEM
-	select TIMER_OF
-	default NDS32
-	help
-	  This option enables support for the Andestech ATCPIT100 timers.
-
 config RISCV_TIMER
 	bool "Timer for the RISC-V platform" if COMPILE_TEST
 	depends on GENERIC_SCHED_CLOCK && RISCV && RISCV_SBI
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index fa5f624eadb6..9c85ee2bb373 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -81,7 +81,6 @@ obj-$(CONFIG_INGENIC_SYSOST)	+= ingenic-sysost.o
 obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
-obj-$(CONFIG_ATCPIT100_TIMER)		+= timer-atcpit100.o
 obj-$(CONFIG_RISCV_TIMER)		+= timer-riscv.o
 obj-$(CONFIG_CLINT_TIMER)		+= timer-clint.o
 obj-$(CONFIG_CSKY_MP_TIMER)		+= timer-mp-csky.o
diff --git a/drivers/clocksource/timer-atcpit100.c b/drivers/clocksource/timer-atcpit100.c
deleted file mode 100644
index b4bd2f5b801d..000000000000
--- a/drivers/clocksource/timer-atcpit100.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-/*
- *  Andestech ATCPIT100 Timer Device Driver Implementation
- * Rick Chen, Andes Technology Corporation <rick@andestech.com>
- *
- */
-
-#include <linux/irq.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/cpufreq.h>
-#include <linux/sched.h>
-#include <linux/sched_clock.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include "timer-of.h"
-#ifdef CONFIG_NDS32
-#include <asm/vdso_timer_info.h>
-#endif
-
-/*
- * Definition of register offsets
- */
-
-/* ID and Revision Register */
-#define ID_REV		0x0
-
-/* Configuration Register */
-#define CFG		0x10
-
-/* Interrupt Enable Register */
-#define INT_EN		0x14
-#define CH_INT_EN(c, i)	((1<<i)<<(4*c))
-#define CH0INT0EN	0x01
-
-/* Interrupt Status Register */
-#define INT_STA		0x18
-#define CH0INT0		0x01
-
-/* Channel Enable Register */
-#define CH_EN		0x1C
-#define CH0TMR0EN	0x1
-#define CH1TMR0EN	0x10
-
-/* Channel 0 , 1 Control Register */
-#define CH0_CTL		(0x20)
-#define CH1_CTL		(0x20 + 0x10)
-
-/* Channel clock source , bit 3 , 0:External clock , 1:APB clock */
-#define APB_CLK		BIT(3)
-
-/* Channel mode , bit 0~2 */
-#define TMR_32		0x1
-#define TMR_16		0x2
-#define TMR_8		0x3
-
-/* Channel 0 , 1 Reload Register */
-#define CH0_REL		(0x24)
-#define CH1_REL		(0x24 + 0x10)
-
-/* Channel 0 , 1 Counter Register */
-#define CH0_CNT		(0x28)
-#define CH1_CNT		(0x28 + 0x10)
-
-#define TIMER_SYNC_TICKS	3
-
-static void atcpit100_ch1_tmr0_en(void __iomem *base)
-{
-	writel(~0, base + CH1_REL);
-	writel(APB_CLK|TMR_32, base + CH1_CTL);
-}
-
-static void atcpit100_ch0_tmr0_en(void __iomem *base)
-{
-	writel(APB_CLK|TMR_32, base + CH0_CTL);
-}
-
-static void atcpit100_clkevt_time_setup(void __iomem *base, unsigned long delay)
-{
-	writel(delay, base + CH0_CNT);
-	writel(delay, base + CH0_REL);
-}
-
-static void atcpit100_timer_clear_interrupt(void __iomem *base)
-{
-	u32 val;
-
-	val = readl(base + INT_STA);
-	writel(val | CH0INT0, base + INT_STA);
-}
-
-static void atcpit100_clocksource_start(void __iomem *base)
-{
-	u32 val;
-
-	val = readl(base + CH_EN);
-	writel(val | CH1TMR0EN, base + CH_EN);
-}
-
-static void atcpit100_clkevt_time_start(void __iomem *base)
-{
-	u32 val;
-
-	val = readl(base + CH_EN);
-	writel(val | CH0TMR0EN, base + CH_EN);
-}
-
-static void atcpit100_clkevt_time_stop(void __iomem *base)
-{
-	u32 val;
-
-	atcpit100_timer_clear_interrupt(base);
-	val = readl(base + CH_EN);
-	writel(val & ~CH0TMR0EN, base + CH_EN);
-}
-
-static int atcpit100_clkevt_next_event(unsigned long evt,
-	struct clock_event_device *clkevt)
-{
-	u32 val;
-	struct timer_of *to = to_timer_of(clkevt);
-
-	val = readl(timer_of_base(to) + CH_EN);
-	writel(val & ~CH0TMR0EN, timer_of_base(to) + CH_EN);
-	writel(evt, timer_of_base(to) + CH0_REL);
-	writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN);
-
-	return 0;
-}
-
-static int atcpit100_clkevt_set_periodic(struct clock_event_device *evt)
-{
-	struct timer_of *to = to_timer_of(evt);
-
-	atcpit100_clkevt_time_setup(timer_of_base(to), timer_of_period(to));
-	atcpit100_clkevt_time_start(timer_of_base(to));
-
-	return 0;
-}
-static int atcpit100_clkevt_shutdown(struct clock_event_device *evt)
-{
-	struct timer_of *to = to_timer_of(evt);
-
-	atcpit100_clkevt_time_stop(timer_of_base(to));
-
-	return 0;
-}
-static int atcpit100_clkevt_set_oneshot(struct clock_event_device *evt)
-{
-	struct timer_of *to = to_timer_of(evt);
-	u32 val;
-
-	writel(~0x0, timer_of_base(to) + CH0_REL);
-	val = readl(timer_of_base(to) + CH_EN);
-	writel(val | CH0TMR0EN, timer_of_base(to) + CH_EN);
-
-	return 0;
-}
-
-static irqreturn_t atcpit100_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
-	struct timer_of *to = to_timer_of(evt);
-
-	atcpit100_timer_clear_interrupt(timer_of_base(to));
-
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct timer_of to = {
-	.flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
-
-	.clkevt = {
-		.name = "atcpit100_tick",
-		.rating = 300,
-		.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-		.set_state_shutdown = atcpit100_clkevt_shutdown,
-		.set_state_periodic = atcpit100_clkevt_set_periodic,
-		.set_state_oneshot = atcpit100_clkevt_set_oneshot,
-		.tick_resume = atcpit100_clkevt_shutdown,
-		.set_next_event = atcpit100_clkevt_next_event,
-		.cpumask = cpu_possible_mask,
-	},
-
-	.of_irq = {
-		.handler = atcpit100_timer_interrupt,
-		.flags = IRQF_TIMER | IRQF_IRQPOLL,
-	},
-
-	/*
-	 * FIXME: we currently only support clocking using PCLK
-	 * and using EXTCLK is not supported in the driver.
-	 */
-	.of_clk = {
-		.name = "PCLK",
-	}
-};
-
-static u64 notrace atcpit100_timer_sched_read(void)
-{
-	return ~readl(timer_of_base(&to) + CH1_CNT);
-}
-
-#ifdef CONFIG_NDS32
-static void fill_vdso_need_info(struct device_node *node)
-{
-	struct resource timer_res;
-	of_address_to_resource(node, 0, &timer_res);
-	timer_info.mapping_base = (unsigned long)timer_res.start;
-	timer_info.cycle_count_down = true;
-	timer_info.cycle_count_reg_offset = CH1_CNT;
-}
-#endif
-
-static int __init atcpit100_timer_init(struct device_node *node)
-{
-	int ret;
-	u32 val;
-	void __iomem *base;
-
-	ret = timer_of_init(node, &to);
-	if (ret)
-		return ret;
-
-	base = timer_of_base(&to);
-
-	sched_clock_register(atcpit100_timer_sched_read, 32,
-		timer_of_rate(&to));
-
-	ret = clocksource_mmio_init(base + CH1_CNT,
-		node->name, timer_of_rate(&to), 300, 32,
-		clocksource_mmio_readl_down);
-
-	if (ret) {
-		pr_err("Failed to register clocksource\n");
-		return ret;
-	}
-
-	/* clear channel 0 timer0 interrupt */
-	atcpit100_timer_clear_interrupt(base);
-
-	clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
-					TIMER_SYNC_TICKS, 0xffffffff);
-	atcpit100_ch0_tmr0_en(base);
-	atcpit100_ch1_tmr0_en(base);
-	atcpit100_clocksource_start(base);
-	atcpit100_clkevt_time_start(base);
-
-	/* Enable channel 0 timer0 interrupt */
-	val = readl(base + INT_EN);
-	writel(val | CH0INT0EN, base + INT_EN);
-
-#ifdef CONFIG_NDS32
-	fill_vdso_need_info(node);
-#endif
-
-	return ret;
-}
-
-TIMER_OF_DECLARE(atcpit100, "andestech,atcpit100", atcpit100_timer_init);
diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c
index 614adb510dbd..2a918aeb0af1 100644
--- a/drivers/hid/uhid.c
+++ b/drivers/hid/uhid.c
@@ -747,7 +747,7 @@ static ssize_t uhid_char_write(struct file *file, const char __user *buffer,
 		 * copied from, so it's unsafe to allow this with elevated
 		 * privileges (e.g. from a setuid binary) or via kernel_write().
 		 */
-		if (file->f_cred != current_cred() || uaccess_kernel()) {
+		if (file->f_cred != current_cred()) {
 			pr_err_once("UHID_CREATE from different security context by process %d (%s), this is not allowed.\n",
 				    task_tgid_vnr(current), current->comm);
 			ret = -EACCES;
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 1f8990f812f1..160a1d8ceaa9 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -92,7 +92,6 @@ obj-$(CONFIG_IRQ_UNIPHIER_AIDET)	+= irq-uniphier-aidet.o
 obj-$(CONFIG_ARCH_SYNQUACER)		+= irq-sni-exiu.o
 obj-$(CONFIG_MESON_IRQ_GPIO)		+= irq-meson-gpio.o
 obj-$(CONFIG_GOLDFISH_PIC) 		+= irq-goldfish-pic.o
-obj-$(CONFIG_NDS32)			+= irq-ativic32.o
 obj-$(CONFIG_QCOM_PDC)			+= qcom-pdc.o
 obj-$(CONFIG_QCOM_MPM)			+= irq-qcom-mpm.o
 obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
diff --git a/drivers/irqchip/irq-ativic32.c b/drivers/irqchip/irq-ativic32.c
deleted file mode 100644
index 223dd2f97d28..000000000000
--- a/drivers/irqchip/irq-ativic32.c
+++ /dev/null
@@ -1,156 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/hardirq.h>
-#include <linux/interrupt.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip.h>
-#include <nds32_intrinsic.h>
-
-#include <asm/irq_regs.h>
-
-unsigned long wake_mask;
-
-static void ativic32_ack_irq(struct irq_data *data)
-{
-	__nds32__mtsr_dsb(BIT(data->hwirq), NDS32_SR_INT_PEND2);
-}
-
-static void ativic32_mask_irq(struct irq_data *data)
-{
-	unsigned long int_mask2 = __nds32__mfsr(NDS32_SR_INT_MASK2);
-	__nds32__mtsr_dsb(int_mask2 & (~(BIT(data->hwirq))), NDS32_SR_INT_MASK2);
-}
-
-static void ativic32_unmask_irq(struct irq_data *data)
-{
-	unsigned long int_mask2 = __nds32__mfsr(NDS32_SR_INT_MASK2);
-	__nds32__mtsr_dsb(int_mask2 | (BIT(data->hwirq)), NDS32_SR_INT_MASK2);
-}
-
-static int nointc_set_wake(struct irq_data *data, unsigned int on)
-{
-	unsigned long int_mask = __nds32__mfsr(NDS32_SR_INT_MASK);
-	static unsigned long irq_orig_bit;
-	u32 bit = 1 << data->hwirq;
-
-	if (on) {
-		if (int_mask & bit)
-			__assign_bit(data->hwirq, &irq_orig_bit, true);
-		else
-			__assign_bit(data->hwirq, &irq_orig_bit, false);
-
-		__assign_bit(data->hwirq, &int_mask, true);
-		__assign_bit(data->hwirq, &wake_mask, true);
-
-	} else {
-		if (!(irq_orig_bit & bit))
-			__assign_bit(data->hwirq, &int_mask, false);
-
-		__assign_bit(data->hwirq, &wake_mask, false);
-		__assign_bit(data->hwirq, &irq_orig_bit, false);
-	}
-
-	__nds32__mtsr_dsb(int_mask, NDS32_SR_INT_MASK);
-
-	return 0;
-}
-
-static struct irq_chip ativic32_chip = {
-	.name = "ativic32",
-	.irq_ack = ativic32_ack_irq,
-	.irq_mask = ativic32_mask_irq,
-	.irq_unmask = ativic32_unmask_irq,
-	.irq_set_wake = nointc_set_wake,
-};
-
-static unsigned int __initdata nivic_map[6] = { 6, 2, 10, 16, 24, 32 };
-
-static struct irq_domain *root_domain;
-static int ativic32_irq_domain_map(struct irq_domain *id, unsigned int virq,
-				  irq_hw_number_t hw)
-{
-
-	unsigned long int_trigger_type;
-	u32 type;
-	struct irq_data *irq_data;
-	int_trigger_type = __nds32__mfsr(NDS32_SR_INT_TRIGGER);
-	irq_data = irq_get_irq_data(virq);
-	if (!irq_data)
-		return -EINVAL;
-
-	if (int_trigger_type & (BIT(hw))) {
-		irq_set_chip_and_handler(virq, &ativic32_chip, handle_edge_irq);
-		type = IRQ_TYPE_EDGE_RISING;
-	} else {
-		irq_set_chip_and_handler(virq, &ativic32_chip, handle_level_irq);
-		type = IRQ_TYPE_LEVEL_HIGH;
-	}
-
-	irqd_set_trigger_type(irq_data, type);
-	return 0;
-}
-
-static const struct irq_domain_ops ativic32_ops = {
-	.map = ativic32_irq_domain_map,
-	.xlate = irq_domain_xlate_onecell
-};
-
-static irq_hw_number_t get_intr_src(void)
-{
-	return ((__nds32__mfsr(NDS32_SR_ITYPE) & ITYPE_mskVECTOR) >> ITYPE_offVECTOR)
-		- NDS32_VECTOR_offINTERRUPT;
-}
-
-static void ativic32_handle_irq(struct pt_regs *regs)
-{
-	irq_hw_number_t hwirq = get_intr_src();
-	generic_handle_domain_irq(root_domain, hwirq);
-}
-
-/*
- * TODO: convert nds32 to GENERIC_IRQ_MULTI_HANDLER so that this entry logic
- * can live in arch code.
- */
-asmlinkage void asm_do_IRQ(struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-
-	irq_enter();
-	old_regs = set_irq_regs(regs);
-	ativic32_handle_irq(regs);
-	set_irq_regs(old_regs);
-	irq_exit();
-}
-
-int __init ativic32_init_irq(struct device_node *node, struct device_node *parent)
-{
-	unsigned long int_vec_base, nivic, nr_ints;
-
-	if (WARN(parent, "non-root ativic32 are not supported"))
-		return -EINVAL;
-
-	int_vec_base = __nds32__mfsr(NDS32_SR_IVB);
-
-	if (((int_vec_base & IVB_mskIVIC_VER) >> IVB_offIVIC_VER) == 0)
-		panic("Unable to use atcivic32 for this cpu.\n");
-
-	nivic = (int_vec_base & IVB_mskNIVIC) >> IVB_offNIVIC;
-	if (nivic >= ARRAY_SIZE(nivic_map))
-		panic("The number of input for ativic32 is not supported.\n");
-
-	nr_ints = nivic_map[nivic];
-
-	root_domain = irq_domain_add_linear(node, nr_ints,
-			&ativic32_ops, NULL);
-
-	if (!root_domain)
-		panic("%s: unable to create IRQ domain\n", node->full_name);
-
-	return 0;
-}
-IRQCHIP_DECLARE(ativic32, "andestech,ativic32", ativic32_init_irq);
diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index 3d1e9a302148..c699bd6bcbb9 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -6,7 +6,7 @@
 config NET_VENDOR_FARADAY
 	bool "Faraday devices"
 	default y
-	depends on ARM || NDS32 || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	help
 	  If you have a network (Ethernet) card belonging to this class, say Y.
 
@@ -19,24 +19,22 @@ if NET_VENDOR_FARADAY
 
 config FTMAC100
 	tristate "Faraday FTMAC100 10/100 Ethernet support"
-	depends on ARM || NDS32 || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	depends on !64BIT || BROKEN
 	select MII
 	help
 	  This driver supports the FTMAC100 10/100 Ethernet controller
-	  from Faraday. It is used on Faraday A320, Andes AG101 and some
-	  other ARM/NDS32 SoC's.
+	  from Faraday. It is used on Faraday A320 and some other ARM SoC's.
 
 config FTGMAC100
 	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
-	depends on ARM || NDS32 || COMPILE_TEST
+	depends on ARM || COMPILE_TEST
 	depends on !64BIT || BROKEN
 	select PHYLIB
 	select MDIO_ASPEED if MACH_ASPEED_G6
 	select CRC32
 	help
 	  This driver supports the FTGMAC100 Gigabit Ethernet controller
-	  from Faraday. It is used on Faraday A369, Andes AG102 and some
-	  other ARM/NDS32 SoC's.
+	  from Faraday. It is used on Faraday A369 and some other ARM SoC's.
 
 endif # NET_VENDOR_FARADAY
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 6b43e97bd417..aaa2376b9d34 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -224,11 +224,6 @@ static int sg_check_file_access(struct file *filp, const char *caller)
 			caller, task_tgid_vnr(current), current->comm);
 		return -EPERM;
 	}
-	if (uaccess_kernel()) {
-		pr_err_once("%s: process %d (%s) called from kernel context, this is not allowed.\n",
-			caller, task_tgid_vnr(current), current->comm);
-		return -EACCES;
-	}
 	return 0;
 }
 
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index fcc46380e7c9..40c50fa2dd70 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -9,7 +9,7 @@ config VGA_CONSOLE
 	bool "VGA text console" if EXPERT || !X86
 	depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC &&  !SUPERH && \
 		(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
-		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !NDS32 && !S390 && !UML
+		!ARM64 && !ARC && !MICROBLAZE && !OPENRISC && !S390 && !UML
 	default y
 	help
 	  Saying Y here will allow you to use Linux in text mode through a