[PATCH] at91_serial -> atmel_serial: at91rm9200_usart.h

Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename
it atmel_usart.h. Also delete AVR32's version of this file.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 123 deletions

diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
deleted file mode 100644
index 79f851e31b9c..000000000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * USART registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_USART_H
-#define AT91RM9200_USART_H
-
-#define AT91_US_CR		0x00			/* Control Register */
-#define		AT91_US_RSTRX		(1 <<  2)		/* Reset Receiver */
-#define		AT91_US_RSTTX		(1 <<  3)		/* Reset Transmitter */
-#define		AT91_US_RXEN		(1 <<  4)		/* Receiver Enable */
-#define		AT91_US_RXDIS		(1 <<  5)		/* Receiver Disable */
-#define		AT91_US_TXEN		(1 <<  6)		/* Transmitter Enable */
-#define		AT91_US_TXDIS		(1 <<  7)		/* Transmitter Disable */
-#define		AT91_US_RSTSTA		(1 <<  8)		/* Reset Status Bits */
-#define		AT91_US_STTBRK		(1 <<  9)		/* Start Break */
-#define		AT91_US_STPBRK		(1 << 10)		/* Stop Break */
-#define		AT91_US_STTTO		(1 << 11)		/* Start Time-out */
-#define		AT91_US_SENDA		(1 << 12)		/* Send Address */
-#define		AT91_US_RSTIT		(1 << 13)		/* Reset Iterations */
-#define		AT91_US_RSTNACK		(1 << 14)		/* Reset Non Acknowledge */
-#define		AT91_US_RETTO		(1 << 15)		/* Rearm Time-out */
-#define		AT91_US_DTREN		(1 << 16)		/* Data Terminal Ready Enable */
-#define		AT91_US_DTRDIS		(1 << 17)		/* Data Terminal Ready Disable */
-#define		AT91_US_RTSEN		(1 << 18)		/* Request To Send Enable */
-#define		AT91_US_RTSDIS		(1 << 19)		/* Request To Send Disable */
-
-#define AT91_US_MR		0x04			/* Mode Register */
-#define		AT91_US_USMODE		(0xf <<  0)		/* Mode of the USART */
-#define			AT91_US_USMODE_NORMAL		0
-#define			AT91_US_USMODE_RS485		1
-#define			AT91_US_USMODE_HWHS		2
-#define			AT91_US_USMODE_MODEM		3
-#define			AT91_US_USMODE_ISO7816_T0	4
-#define			AT91_US_USMODE_ISO7816_T1	6
-#define			AT91_US_USMODE_IRDA		8
-#define		AT91_US_USCLKS		(3   <<  4)		/* Clock Selection */
-#define		AT91_US_CHRL		(3   <<  6)		/* Character Length */
-#define			AT91_US_CHRL_5			(0 <<  6)
-#define			AT91_US_CHRL_6			(1 <<  6)
-#define			AT91_US_CHRL_7			(2 <<  6)
-#define			AT91_US_CHRL_8			(3 <<  6)
-#define		AT91_US_SYNC		(1 <<  8)		/* Synchronous Mode Select */
-#define		AT91_US_PAR		(7 <<  9)		/* Parity Type */
-#define			AT91_US_PAR_EVEN		(0 <<  9)
-#define			AT91_US_PAR_ODD			(1 <<  9)
-#define			AT91_US_PAR_SPACE		(2 <<  9)
-#define			AT91_US_PAR_MARK		(3 <<  9)
-#define			AT91_US_PAR_NONE		(4 <<  9)
-#define			AT91_US_PAR_MULTI_DROP		(6 <<  9)
-#define		AT91_US_NBSTOP		(3 << 12)		/* Number of Stop Bits */
-#define			AT91_US_NBSTOP_1		(0 << 12)
-#define			AT91_US_NBSTOP_1_5		(1 << 12)
-#define			AT91_US_NBSTOP_2		(2 << 12)
-#define		AT91_US_CHMODE		(3 << 14)		/* Channel Mode */
-#define			AT91_US_CHMODE_NORMAL		(0 << 14)
-#define			AT91_US_CHMODE_ECHO		(1 << 14)
-#define			AT91_US_CHMODE_LOC_LOOP		(2 << 14)
-#define			AT91_US_CHMODE_REM_LOOP		(3 << 14)
-#define		AT91_US_MSBF		(1 << 16)		/* Bit Order */
-#define		AT91_US_MODE9		(1 << 17)		/* 9-bit Character Length */
-#define		AT91_US_CLKO		(1 << 18)		/* Clock Output Select */
-#define		AT91_US_OVER		(1 << 19)		/* Oversampling Mode */
-#define		AT91_US_INACK		(1 << 20)		/* Inhibit Non Acknowledge */
-#define		AT91_US_DSNACK		(1 << 21)		/* Disable Successive NACK */
-#define		AT91_US_MAX_ITER	(7 << 24)		/* Max Iterations */
-#define		AT91_US_FILTER		(1 << 28)		/* Infrared Receive Line Filter */
-
-#define AT91_US_IER		0x08			/* Interrupt Enable Register */
-#define		AT91_US_RXRDY		(1 <<  0)		/* Receiver Ready */
-#define		AT91_US_TXRDY		(1 <<  1)		/* Transmitter Ready */
-#define		AT91_US_RXBRK		(1 <<  2)		/* Break Received / End of Break */
-#define		AT91_US_ENDRX		(1 <<  3)		/* End of Receiver Transfer */
-#define		AT91_US_ENDTX		(1 <<  4)		/* End of Transmitter Transfer */
-#define		AT91_US_OVRE		(1 <<  5)		/* Overrun Error */
-#define		AT91_US_FRAME		(1 <<  6)		/* Framing Error */
-#define		AT91_US_PARE		(1 <<  7)		/* Parity Error */
-#define		AT91_US_TIMEOUT		(1 <<  8)		/* Receiver Time-out */
-#define		AT91_US_TXEMPTY		(1 <<  9)		/* Transmitter Empty */
-#define		AT91_US_ITERATION	(1 << 10)		/* Max number of Repetitions Reached */
-#define		AT91_US_TXBUFE		(1 << 11)		/* Transmission Buffer Empty */
-#define		AT91_US_RXBUFF		(1 << 12)		/* Reception Buffer Full */
-#define		AT91_US_NACK		(1 << 13)		/* Non Acknowledge */
-#define		AT91_US_RIIC		(1 << 16)		/* Ring Indicator Input Change */
-#define		AT91_US_DSRIC		(1 << 17)		/* Data Set Ready Input Change */
-#define		AT91_US_DCDIC		(1 << 18)		/* Data Carrier Detect Input Change */
-#define		AT91_US_CTSIC		(1 << 19)		/* Clear to Send Input Change */
-#define		AT91_US_RI		(1 << 20)		/* RI */
-#define		AT91_US_DSR		(1 << 21)		/* DSR */
-#define		AT91_US_DCD		(1 << 22)		/* DCD */
-#define		AT91_US_CTS		(1 << 23)		/* CTS */
-
-#define AT91_US_IDR		0x0c			/* Interrupt Disable Register */
-#define AT91_US_IMR		0x10			/* Interrupt Mask Register */
-#define AT91_US_CSR		0x14			/* Channel Status Register */
-#define AT91_US_RHR		0x18			/* Receiver Holding Register */
-#define AT91_US_THR		0x1c			/* Transmitter Holding Register */
-
-#define AT91_US_BRGR		0x20			/* Baud Rate Generator Register */
-#define		AT91_US_CD		(0xffff << 0)		/* Clock Divider */
-
-#define AT91_US_RTOR		0x24			/* Receiver Time-out Register */
-#define		AT91_US_TO		(0xffff << 0)		/* Time-out Value */
-
-#define AT91_US_TTGR		0x28			/* Transmitter Timeguard Register */
-#define		AT91_US_TG		(0xff << 0)		/* Timeguard Value */
-
-#define AT91_US_FIDI		0x40			/* FI DI Ratio Register */
-#define AT91_US_NER		0x44			/* Number of Errors Register */
-#define AT91_US_IF		0x4c			/* IrDA Filter Register */
-
-#endif