Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...

3 files changed, 45 insertions, 32 deletions

diff --git a/include/linux/i2c-mux.h b/include/linux/i2c-mux.h
index 40cb05a97b46..b5f9a007a3ab 100644
--- a/include/linux/i2c-mux.h
+++ b/include/linux/i2c-mux.h
@@ -42,7 +42,7 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 				int (*deselect) (struct i2c_adapter *,
 						 void *mux_dev, u32 chan_id));
 
-int i2c_del_mux_adapter(struct i2c_adapter *adap);
+void i2c_del_mux_adapter(struct i2c_adapter *adap);
 
 #endif /* __KERNEL__ */
 
diff --git a/include/linux/i2c-tegra.h b/include/linux/i2c-tegra.h
deleted file mode 100644
index 9c85da49857a..000000000000
--- a/include/linux/i2c-tegra.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * drivers/i2c/busses/i2c-tegra.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Author: Colin Cross <ccross@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef _LINUX_I2C_TEGRA_H
-#define _LINUX_I2C_TEGRA_H
-
-struct tegra_i2c_platform_data {
-	unsigned long bus_clk_rate;
-};
-
-#endif /* _LINUX_I2C_TEGRA_H */
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index d0c4db7b4872..e988fa935b3c 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -125,7 +125,6 @@ extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
  * struct i2c_driver - represent an I2C device driver
  * @class: What kind of i2c device we instantiate (for detect)
  * @attach_adapter: Callback for bus addition (deprecated)
- * @detach_adapter: Callback for bus removal (deprecated)
  * @probe: Callback for device binding
  * @remove: Callback for device unbinding
  * @shutdown: Callback for device shutdown
@@ -162,12 +161,10 @@ extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
 struct i2c_driver {
 	unsigned int class;
 
-	/* Notifies the driver that a new bus has appeared or is about to be
-	 * removed. You should avoid using this, it will be removed in a
-	 * near future.
+	/* Notifies the driver that a new bus has appeared. You should avoid
+	 * using this, it will be removed in a near future.
 	 */
 	int (*attach_adapter)(struct i2c_adapter *) __deprecated;
-	int (*detach_adapter)(struct i2c_adapter *) __deprecated;
 
 	/* Standard driver model interfaces */
 	int (*probe)(struct i2c_client *, const struct i2c_device_id *);
@@ -370,6 +367,45 @@ struct i2c_algorithm {
 	u32 (*functionality) (struct i2c_adapter *);
 };
 
+/**
+ * struct i2c_bus_recovery_info - I2C bus recovery information
+ * @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or
+ *	i2c_generic_scl_recovery() or i2c_generic_gpio_recovery().
+ * @get_scl: This gets current value of SCL line. Mandatory for generic SCL
+ *      recovery. Used internally for generic GPIO recovery.
+ * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used
+ *      internally for generic GPIO recovery.
+ * @get_sda: This gets current value of SDA line. Optional for generic SCL
+ *      recovery. Used internally, if sda_gpio is a valid GPIO, for generic GPIO
+ *      recovery.
+ * @prepare_recovery: This will be called before starting recovery. Platform may
+ *	configure padmux here for SDA/SCL line or something else they want.
+ * @unprepare_recovery: This will be called after completing recovery. Platform
+ *	may configure padmux here for SDA/SCL line or something else they want.
+ * @scl_gpio: gpio number of the SCL line. Only required for GPIO recovery.
+ * @sda_gpio: gpio number of the SDA line. Only required for GPIO recovery.
+ */
+struct i2c_bus_recovery_info {
+	int (*recover_bus)(struct i2c_adapter *);
+
+	int (*get_scl)(struct i2c_adapter *);
+	void (*set_scl)(struct i2c_adapter *, int val);
+	int (*get_sda)(struct i2c_adapter *);
+
+	void (*prepare_recovery)(struct i2c_bus_recovery_info *bri);
+	void (*unprepare_recovery)(struct i2c_bus_recovery_info *bri);
+
+	/* gpio recovery */
+	int scl_gpio;
+	int sda_gpio;
+};
+
+int i2c_recover_bus(struct i2c_adapter *adap);
+
+/* Generic recovery routines */
+int i2c_generic_gpio_recovery(struct i2c_adapter *adap);
+int i2c_generic_scl_recovery(struct i2c_adapter *adap);
+
 /*
  * i2c_adapter is the structure used to identify a physical i2c bus along
  * with the access algorithms necessary to access it.
@@ -393,6 +429,8 @@ struct i2c_adapter {
 
 	struct mutex userspace_clients_lock;
 	struct list_head userspace_clients;
+
+	struct i2c_bus_recovery_info *bus_recovery_info;
 };
 #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
 
@@ -450,7 +488,7 @@ void i2c_unlock_adapter(struct i2c_adapter *);
  */
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 extern int i2c_add_adapter(struct i2c_adapter *);
-extern int i2c_del_adapter(struct i2c_adapter *);
+extern void i2c_del_adapter(struct i2c_adapter *);
 extern int i2c_add_numbered_adapter(struct i2c_adapter *);
 
 extern int i2c_register_driver(struct module *, struct i2c_driver *);