Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New offloading infrastructure and example 'rocker' driver for
    offloading of switching and routing to hardware.

    This work was done by a large group of dedicated individuals, not
    limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend,
    Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu

 2) Start making the networking operate on IOV iterators instead of
    modifying iov objects in-situ during transfers.  Thanks to Al Viro
    and Herbert Xu.

 3) A set of new netlink interfaces for the TIPC stack, from Richard
    Alpe.

 4) Remove unnecessary looping during ipv6 routing lookups, from Martin
    KaFai Lau.

 5) Add PAUSE frame generation support to gianfar driver, from Matei
    Pavaluca.

 6) Allow for larger reordering levels in TCP, which are easily
    achievable in the real world right now, from Eric Dumazet.

 7) Add a variable of napi_schedule that doesn't need to disable cpu
    interrupts, from Eric Dumazet.

 8) Use a doubly linked list to optimize neigh_parms_release(), from
    Nicolas Dichtel.

 9) Various enhancements to the kernel BPF verifier, and allow eBPF
    programs to actually be attached to sockets.  From Alexei
    Starovoitov.

10) Support TSO/LSO in sunvnet driver, from David L Stevens.

11) Allow controlling ECN usage via routing metrics, from Florian
    Westphal.

12) Remote checksum offload, from Tom Herbert.

13) Add split-header receive, BQL, and xmit_more support to amd-xgbe
    driver, from Thomas Lendacky.

14) Add MPLS support to openvswitch, from Simon Horman.

15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen
    Klassert.

16) Do gro flushes on a per-device basis using a timer, from Eric
    Dumazet.  This tries to resolve the conflicting goals between the
    desired handling of bulk vs.  RPC-like traffic.

17) Allow userspace to ask for the CPU upon what a packet was
    received/steered, via SO_INCOMING_CPU.  From Eric Dumazet.

18) Limit GSO packets to half the current congestion window, from Eric
    Dumazet.

19) Add a generic helper so that all drivers set their RSS keys in a
    consistent way, from Eric Dumazet.

20) Add xmit_more support to enic driver, from Govindarajulu
    Varadarajan.

21) Add VLAN packet scheduler action, from Jiri Pirko.

22) Support configurable RSS hash functions via ethtool, from Eyal
    Perry.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits)
  Fix race condition between vxlan_sock_add and vxlan_sock_release
  net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header
  net/mlx4: Add support for A0 steering
  net/mlx4: Refactor QUERY_PORT
  net/mlx4_core: Add explicit error message when rule doesn't meet configuration
  net/mlx4: Add A0 hybrid steering
  net/mlx4: Add mlx4_bitmap zone allocator
  net/mlx4: Add a check if there are too many reserved QPs
  net/mlx4: Change QP allocation scheme
  net/mlx4_core: Use tasklet for user-space CQ completion events
  net/mlx4_core: Mask out host side virtualization features for guests
  net/mlx4_en: Set csum level for encapsulated packets
  be2net: Export tunnel offloads only when a VxLAN tunnel is created
  gianfar: Fix dma check map error when DMA_API_DEBUG is enabled
  cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call
  net: fec: only enable mdio interrupt before phy device link up
  net: fec: clear all interrupt events to support i.MX6SX
  net: fec: reset fep link status in suspend function
  net: sock: fix access via invalid file descriptor
  net: introduce helper macro for_each_cmsghdr
  ...

1 files changed, 304 insertions, 15 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 0ad1f47d2dc7..58d719ddaa60 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -263,6 +263,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
  *	note that this is only called when it changes after the channel
  *	context had been assigned.
+ * @BSS_CHANGED_OCB: OCB join status changed
  */
 enum ieee80211_bss_change {
 	BSS_CHANGED_ASSOC		= 1<<0,
@@ -287,6 +288,7 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_P2P_PS		= 1<<19,
 	BSS_CHANGED_BEACON_INFO		= 1<<20,
 	BSS_CHANGED_BANDWIDTH		= 1<<21,
+	BSS_CHANGED_OCB                 = 1<<22,
 
 	/* when adding here, make sure to change ieee80211_reconfig */
 };
@@ -739,7 +741,8 @@ struct ieee80211_tx_info {
 			u8 ampdu_ack_len;
 			u8 ampdu_len;
 			u8 antenna;
-			void *status_driver_data[21 / sizeof(void *)];
+			u16 tx_time;
+			void *status_driver_data[19 / sizeof(void *)];
 		} status;
 		struct {
 			struct ieee80211_tx_rate driver_rates[
@@ -879,6 +882,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	subframes share the same sequence number. Reported subframes can be
  *	either regular MSDU or singly A-MSDUs. Subframes must not be
  *	interleaved with other frames.
+ * @RX_FLAG_RADIOTAP_VENDOR_DATA: This frame contains vendor-specific
+ *	radiotap data in the skb->data (before the frame) as described by
+ *	the &struct ieee80211_vendor_radiotap.
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -908,6 +914,7 @@ enum mac80211_rx_flags {
 	RX_FLAG_10MHZ			= BIT(28),
 	RX_FLAG_5MHZ			= BIT(29),
 	RX_FLAG_AMSDU_MORE		= BIT(30),
+	RX_FLAG_RADIOTAP_VENDOR_DATA	= BIT(31),
 };
 
 #define RX_FLAG_STBC_SHIFT		26
@@ -979,6 +986,39 @@ struct ieee80211_rx_status {
 };
 
 /**
+ * struct ieee80211_vendor_radiotap - vendor radiotap data information
+ * @present: presence bitmap for this vendor namespace
+ *	(this could be extended in the future if any vendor needs more
+ *	 bits, the radiotap spec does allow for that)
+ * @align: radiotap vendor namespace alignment. This defines the needed
+ *	alignment for the @data field below, not for the vendor namespace
+ *	description itself (which has a fixed 2-byte alignment)
+ *	Must be a power of two, and be set to at least 1!
+ * @oui: radiotap vendor namespace OUI
+ * @subns: radiotap vendor sub namespace
+ * @len: radiotap vendor sub namespace skip length, if alignment is done
+ *	then that's added to this, i.e. this is only the length of the
+ *	@data field.
+ * @pad: number of bytes of padding after the @data, this exists so that
+ *	the skb data alignment can be preserved even if the data has odd
+ *	length
+ * @data: the actual vendor namespace data
+ *
+ * This struct, including the vendor data, goes into the skb->data before
+ * the 802.11 header. It's split up in mac80211 using the align/oui/subns
+ * data.
+ */
+struct ieee80211_vendor_radiotap {
+	u32 present;
+	u8 align;
+	u8 oui[3];
+	u8 subns;
+	u8 pad;
+	u16 len;
+	u8 data[];
+} __packed;
+
+/**
  * enum ieee80211_conf_flags - configuration flags
  *
  * Flags to define PHY configuration options
@@ -1117,6 +1157,8 @@ struct ieee80211_conf {
  *	Function (TSF) timer when the frame containing the channel switch
  *	announcement was received. This is simply the rx.mactime parameter
  *	the driver passed into mac80211.
+ * @device_timestamp: arbitrary timestamp for the device, this is the
+ *	rx.device_timestamp parameter the driver passed to mac80211.
  * @block_tx: Indicates whether transmission must be blocked before the
  *	scheduled channel switch, as indicated by the AP.
  * @chandef: the new channel to switch to
@@ -1124,6 +1166,7 @@ struct ieee80211_conf {
  */
 struct ieee80211_channel_switch {
 	u64 timestamp;
+	u32 device_timestamp;
 	bool block_tx;
 	struct cfg80211_chan_def chandef;
 	u8 count;
@@ -1423,6 +1466,8 @@ struct ieee80211_sta_rates {
  * @smps_mode: current SMPS mode (off, static or dynamic)
  * @rates: rate control selection table
  * @tdls: indicates whether the STA is a TDLS peer
+ * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
+ *	valid if the STA is a TDLS peer in the first place.
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1438,6 +1483,7 @@ struct ieee80211_sta {
 	enum ieee80211_smps_mode smps_mode;
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
+	bool tdls_initiator;
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1576,6 +1622,10 @@ struct ieee80211_tx_control {
  *	a virtual monitor interface when monitor interfaces are the only
  *	active interfaces.
  *
+ * @IEEE80211_HW_NO_AUTO_VIF: The driver would like for no wlanX to
+ *	be created.  It is expected user-space will create vifs as
+ *	desired (and thus have them named as desired).
+ *
  * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
@@ -1622,7 +1672,8 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
-	/* free slots */
+	IEEE80211_HW_NO_AUTO_VIF			= 1<<15,
+	/* free slot */
 	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
@@ -1776,6 +1827,31 @@ struct ieee80211_scan_request {
 };
 
 /**
+ * struct ieee80211_tdls_ch_sw_params - TDLS channel switch parameters
+ *
+ * @sta: peer this TDLS channel-switch request/response came from
+ * @chandef: channel referenced in a TDLS channel-switch request
+ * @action_code: see &enum ieee80211_tdls_actioncode
+ * @status: channel-switch response status
+ * @timestamp: time at which the frame was received
+ * @switch_time: switch-timing parameter received in the frame
+ * @switch_timeout: switch-timing parameter received in the frame
+ * @tmpl_skb: TDLS switch-channel response template
+ * @ch_sw_tm_ie: offset of the channel-switch timing IE inside @tmpl_skb
+ */
+struct ieee80211_tdls_ch_sw_params {
+	struct ieee80211_sta *sta;
+	struct cfg80211_chan_def *chandef;
+	u8 action_code;
+	u32 status;
+	u32 timestamp;
+	u16 switch_time;
+	u16 switch_timeout;
+	struct sk_buff *tmpl_skb;
+	u32 ch_sw_tm_ie;
+};
+
+/**
  * wiphy_to_ieee80211_hw - return a mac80211 driver hw struct from a wiphy
  *
  * @wiphy: the &struct wiphy which we want to query
@@ -2375,6 +2451,22 @@ enum ieee80211_roc_type {
 };
 
 /**
+ * enum ieee80211_reconfig_complete_type - reconfig type
+ *
+ * This enum is used by the reconfig_complete() callback to indicate what
+ * reconfiguration type was completed.
+ *
+ * @IEEE80211_RECONFIG_TYPE_RESTART: hw restart type
+ *	(also due to resume() callback returning 1)
+ * @IEEE80211_RECONFIG_TYPE_SUSPEND: suspend type (regardless
+ *	of wowlan configuration)
+ */
+enum ieee80211_reconfig_type {
+	IEEE80211_RECONFIG_TYPE_RESTART,
+	IEEE80211_RECONFIG_TYPE_SUSPEND,
+};
+
+/**
  * struct ieee80211_ops - callbacks from mac80211 to the driver
  *
  * This structure contains various callbacks that the driver may
@@ -2530,7 +2622,9 @@ enum ieee80211_roc_type {
  *
  * @sw_scan_start: Notifier function that is called just before a software scan
  *	is started. Can be NULL, if the driver doesn't need this notification.
- *	The callback can sleep.
+ *	The mac_addr parameter allows supporting NL80211_SCAN_FLAG_RANDOM_ADDR,
+ *	the driver may set the NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR flag if it
+ *	can use this parameter. The callback can sleep.
  *
  * @sw_scan_complete: Notifier function that is called just after a
  *	software scan finished. Can be NULL, if the driver doesn't need
@@ -2601,6 +2695,9 @@ enum ieee80211_roc_type {
  *	uses hardware rate control (%IEEE80211_HW_HAS_RATE_CONTROL) since
  *	otherwise the rate control algorithm is notified directly.
  *	Must be atomic.
+ * @sta_rate_tbl_update: Notifies the driver that the rate table changed. This
+ *	is only used if the configured rate control algorithm actually uses
+ *	the new rate table API, and is therefore optional. Must be atomic.
  *
  * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max),
  *	bursting) for a hardware TX queue.
@@ -2809,11 +2906,11 @@ enum ieee80211_roc_type {
  *	disabled/enabled via @bss_info_changed.
  * @stop_ap: Stop operation on the AP interface.
  *
- * @restart_complete: Called after a call to ieee80211_restart_hw(), when the
- *	reconfiguration has completed. This can help the driver implement the
- *	reconfiguration step. Also called when reconfiguring because the
- *	driver's resume function returned 1, as this is just like an "inline"
- *	hardware restart. This callback may sleep.
+ * @reconfig_complete: Called after a call to ieee80211_restart_hw() and
+ *	during resume, when the reconfiguration has completed.
+ *	This can help the driver implement the reconfiguration step (and
+ *	indicate mac80211 is ready to receive frames).
+ *	This callback may sleep.
  *
  * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
  *	Currently, this is only called for managed or P2P client interfaces.
@@ -2829,6 +2926,13 @@ enum ieee80211_roc_type {
  *	transmitted and then call ieee80211_csa_finish().
  *	If the CSA count starts as zero or 1, this function will not be called,
  *	since there won't be any time to beacon before the switch anyway.
+ * @pre_channel_switch: This is an optional callback that is called
+ *	before a channel switch procedure is started (ie. when a STA
+ *	gets a CSA or an userspace initiated channel-switch), allowing
+ *	the driver to prepare for the channel switch.
+ * @post_channel_switch: This is an optional callback that is called
+ *	after a channel switch procedure is completed, allowing the
+ *	driver to go back to a normal configuration.
  *
  * @join_ibss: Join an IBSS (on an IBSS interface); this is called after all
  *	information in bss_conf is set up and the beacon can be retrieved. A
@@ -2838,6 +2942,26 @@ enum ieee80211_roc_type {
  * @get_expected_throughput: extract the expected throughput towards the
  *	specified station. The returned value is expressed in Kbps. It returns 0
  *	if the RC algorithm does not have proper data to provide.
+ *
+ * @get_txpower: get current maximum tx power (in dBm) based on configuration
+ *	and hardware limits.
+ *
+ * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver
+ *	is responsible for continually initiating channel-switching operations
+ *	and returning to the base channel for communication with the AP. The
+ *	driver receives a channel-switch request template and the location of
+ *	the switch-timing IE within the template as part of the invocation.
+ *	The template is valid only within the call, and the driver can
+ *	optionally copy the skb for further re-use.
+ * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both
+ *	peers must be on the base channel when the call completes.
+ * @tdls_recv_channel_switch: a TDLS channel-switch related frame (request or
+ *	response) has been received from a remote peer. The driver gets
+ *	parameters parsed from the incoming frame and may use them to continue
+ *	an ongoing channel-switch operation. In addition, a channel-switch
+ *	response template is provided, together with the location of the
+ *	switch-timing IE within the template. The skb can only be used within
+ *	the function call.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2897,8 +3021,11 @@ struct ieee80211_ops {
 				struct ieee80211_scan_ies *ies);
 	int (*sched_scan_stop)(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif);
-	void (*sw_scan_start)(struct ieee80211_hw *hw);
-	void (*sw_scan_complete)(struct ieee80211_hw *hw);
+	void (*sw_scan_start)(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      const u8 *mac_addr);
+	void (*sw_scan_complete)(struct ieee80211_hw *hw,
+				 struct ieee80211_vif *vif);
 	int (*get_stats)(struct ieee80211_hw *hw,
 			 struct ieee80211_low_level_stats *stats);
 	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
@@ -2932,6 +3059,9 @@ struct ieee80211_ops {
 			      struct ieee80211_vif *vif,
 			      struct ieee80211_sta *sta,
 			      u32 changed);
+	void (*sta_rate_tbl_update)(struct ieee80211_hw *hw,
+				    struct ieee80211_vif *vif,
+				    struct ieee80211_sta *sta);
 	int (*conf_tx)(struct ieee80211_hw *hw,
 		       struct ieee80211_vif *vif, u16 ac,
 		       const struct ieee80211_tx_queue_params *params);
@@ -2959,6 +3089,7 @@ struct ieee80211_ops {
 	void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		      u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
 	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
@@ -3025,7 +3156,8 @@ struct ieee80211_ops {
 				  int n_vifs,
 				  enum ieee80211_chanctx_switch_mode mode);
 
-	void (*restart_complete)(struct ieee80211_hw *hw);
+	void (*reconfig_complete)(struct ieee80211_hw *hw,
+				  enum ieee80211_reconfig_type reconfig_type);
 
 #if IS_ENABLED(CONFIG_IPV6)
 	void (*ipv6_addr_change)(struct ieee80211_hw *hw,
@@ -3035,14 +3167,54 @@ struct ieee80211_ops {
 	void (*channel_switch_beacon)(struct ieee80211_hw *hw,
 				      struct ieee80211_vif *vif,
 				      struct cfg80211_chan_def *chandef);
+	int (*pre_channel_switch)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  struct ieee80211_channel_switch *ch_switch);
+
+	int (*post_channel_switch)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif);
 
 	int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	u32 (*get_expected_throughput)(struct ieee80211_sta *sta);
+	int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			   int *dbm);
+
+	int (*tdls_channel_switch)(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif,
+				   struct ieee80211_sta *sta, u8 oper_class,
+				   struct cfg80211_chan_def *chandef,
+				   struct sk_buff *tmpl_skb, u32 ch_sw_tm_ie);
+	void (*tdls_cancel_channel_switch)(struct ieee80211_hw *hw,
+					   struct ieee80211_vif *vif,
+					   struct ieee80211_sta *sta);
+	void (*tdls_recv_channel_switch)(struct ieee80211_hw *hw,
+					 struct ieee80211_vif *vif,
+					 struct ieee80211_tdls_ch_sw_params *params);
 };
 
 /**
- * ieee80211_alloc_hw -  Allocate a new hardware device
+ * ieee80211_alloc_hw_nm - Allocate a new hardware device
+ *
+ * This must be called once for each hardware device. The returned pointer
+ * must be used to refer to this device when calling other functions.
+ * mac80211 allocates a private data area for the driver pointed to by
+ * @priv in &struct ieee80211_hw, the size of this area is given as
+ * @priv_data_len.
+ *
+ * @priv_data_len: length of private data
+ * @ops: callbacks for this device
+ * @requested_name: Requested name for this device.
+ *	NULL is valid value, and means use the default naming (phy%d)
+ *
+ * Return: A pointer to the new hardware device, or %NULL on error.
+ */
+struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
+					   const struct ieee80211_ops *ops,
+					   const char *requested_name);
+
+/**
+ * ieee80211_alloc_hw - Allocate a new hardware device
  *
  * This must be called once for each hardware device. The returned pointer
  * must be used to refer to this device when calling other functions.
@@ -3055,8 +3227,12 @@ struct ieee80211_ops {
  *
  * Return: A pointer to the new hardware device, or %NULL on error.
  */
+static inline
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
-					const struct ieee80211_ops *ops);
+					const struct ieee80211_ops *ops)
+{
+	return ieee80211_alloc_hw_nm(priv_data_len, ops, NULL);
+}
 
 /**
  * ieee80211_register_hw - Register hardware device
@@ -3443,6 +3619,26 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
 			 struct sk_buff *skb);
 
 /**
+ * ieee80211_tx_status_noskb - transmit status callback without skb
+ *
+ * This function can be used as a replacement for ieee80211_tx_status
+ * in drivers that cannot reliably map tx status information back to
+ * specific skbs.
+ *
+ * Calls to this function for a single hardware must be synchronized
+ * against each other. Calls to this function, ieee80211_tx_status_ni()
+ * and ieee80211_tx_status_irqsafe() may not be mixed for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @sta: the receiver station to which this packet is sent
+ *	(NULL for multicast packets)
+ * @info: tx status information
+ */
+void ieee80211_tx_status_noskb(struct ieee80211_hw *hw,
+			       struct ieee80211_sta *sta,
+			       struct ieee80211_tx_info *info);
+
+/**
  * ieee80211_tx_status_ni - transmit status callback (in process context)
  *
  * Like ieee80211_tx_status() but can be called in process context.
@@ -3655,7 +3851,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
 /**
  * ieee80211_probereq_get - retrieve a Probe Request template
  * @hw: pointer obtained from ieee80211_alloc_hw().
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @src_addr: source MAC address
  * @ssid: SSID buffer
  * @ssid_len: length of SSID
  * @tailroom: tailroom to reserve at end of SKB for IEs
@@ -3666,7 +3862,7 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw,
  * Return: The Probe Request template. %NULL on error.
  */
 struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw,
-				       struct ieee80211_vif *vif,
+				       const u8 *src_addr,
 				       const u8 *ssid, size_t ssid_len,
 				       size_t tailroom);
 
@@ -4172,6 +4368,22 @@ void ieee80211_iterate_active_interfaces_rtnl(struct ieee80211_hw *hw,
 					      void *data);
 
 /**
+ * ieee80211_iterate_stations_atomic - iterate stations
+ *
+ * This function iterates over all stations associated with a given
+ * hardware that are currently uploaded to the driver and calls the callback
+ * function for them.
+ * This function requires the iterator callback function to be atomic,
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_stations_atomic(struct ieee80211_hw *hw,
+				       void (*iterator)(void *data,
+						struct ieee80211_sta *sta),
+				       void *data);
+/**
  * ieee80211_queue_work - add work onto the mac80211 workqueue
  *
  * Drivers and mac80211 use this to add work onto the mac80211 workqueue.
@@ -4480,6 +4692,14 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
 			       gfp_t gfp);
 
 /**
+ * ieee80211_cqm_beacon_loss_notify - inform CQM of beacon loss
+ *
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @gfp: context flags
+ */
+void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp);
+
+/**
  * ieee80211_radar_detected - inform that a radar was detected
  *
  * @hw: pointer as obtained from ieee80211_alloc_hw()
@@ -4637,6 +4857,10 @@ struct rate_control_ops {
 	void (*free_sta)(void *priv, struct ieee80211_sta *sta,
 			 void *priv_sta);
 
+	void (*tx_status_noskb)(void *priv,
+				struct ieee80211_supported_band *sband,
+				struct ieee80211_sta *sta, void *priv_sta,
+				struct ieee80211_tx_info *info);
 	void (*tx_status)(void *priv, struct ieee80211_supported_band *sband,
 			  struct ieee80211_sta *sta, void *priv_sta,
 			  struct sk_buff *skb);
@@ -4888,4 +5112,69 @@ void ieee80211_update_p2p_noa(struct ieee80211_noa_data *data, u32 tsf);
 void ieee80211_tdls_oper_request(struct ieee80211_vif *vif, const u8 *peer,
 				 enum nl80211_tdls_operation oper,
 				 u16 reason_code, gfp_t gfp);
+
+/**
+ * ieee80211_reserve_tid - request to reserve a specific TID
+ *
+ * There is sometimes a need (such as in TDLS) for blocking the driver from
+ * using a specific TID so that the FW can use it for certain operations such
+ * as sending PTI requests. To make sure that the driver doesn't use that TID,
+ * this function must be called as it flushes out packets on this TID and marks
+ * it as blocked, so that any transmit for the station on this TID will be
+ * redirected to the alternative TID in the same AC.
+ *
+ * Note that this function blocks and may call back into the driver, so it
+ * should be called without driver locks held. Also note this function should
+ * only be called from the driver's @sta_state callback.
+ *
+ * @sta: the station to reserve the TID for
+ * @tid: the TID to reserve
+ *
+ * Returns: 0 on success, else on failure
+ */
+int ieee80211_reserve_tid(struct ieee80211_sta *sta, u8 tid);
+
+/**
+ * ieee80211_unreserve_tid - request to unreserve a specific TID
+ *
+ * Once there is no longer any need for reserving a certain TID, this function
+ * should be called, and no longer will packets have their TID modified for
+ * preventing use of this TID in the driver.
+ *
+ * Note that this function blocks and acquires a lock, so it should be called
+ * without driver locks held. Also note this function should only be called
+ * from the driver's @sta_state callback.
+ *
+ * @sta: the station
+ * @tid: the TID to unreserve
+ */
+void ieee80211_unreserve_tid(struct ieee80211_sta *sta, u8 tid);
+
+/**
+ * ieee80211_ie_split - split an IE buffer according to ordering
+ *
+ * @ies: the IE buffer
+ * @ielen: the length of the IE buffer
+ * @ids: an array with element IDs that are allowed before
+ *	the split
+ * @n_ids: the size of the element ID array
+ * @offset: offset where to start splitting in the buffer
+ *
+ * This function splits an IE buffer by updating the @offset
+ * variable to point to the location where the buffer should be
+ * split.
+ *
+ * It assumes that the given IE buffer is well-formed, this
+ * has to be guaranteed by the caller!
+ *
+ * It also assumes that the IEs in the buffer are ordered
+ * correctly, if not the result of using this function will not
+ * be ordered correctly either, i.e. it does no reordering.
+ *
+ * The function returns the offset where the next part of the
+ * buffer starts, which may be @ielen if the entire (remainder)
+ * of the buffer should be used.
+ */
+size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
+			  const u8 *ids, int n_ids, size_t offset);
 #endif /* MAC80211_H */