diff options
| author | Tim Harvey <tharvey@gateworks.com> | 2020-05-15 10:57:07 -0700 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2020-05-20 10:28:57 +0100 |
| commit | d85234994b2fb2d88fadd3d9e60385b02b244dac (patch) | |
| tree | b31a5eb9f78c3ebe6f173166c83f7f3085b724e5 /include | |
| parent | 3e6cae8e5d40b8bdee1815124b5e36abcc746f56 (diff) | |
mfd: Add Gateworks System Controller core driver
The Gateworks System Controller (GSC) is an I2C slave controller
implemented with an MSP430 micro-controller whose firmware embeds the
following features:
- I/O expander (16 GPIO's) using PCA955x protocol
- Real Time Clock using DS1672 protocol
- User EEPROM using AT24 protocol
- HWMON using custom protocol
- Interrupt controller with tamper detect, user pushbotton
- Watchdog controller capable of full board power-cycle
- Power Control capable of full board power-cycle
see http://trac.gateworks.com/wiki/gsc for more details
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mfd/gsc.h | 76 |
1 files changed, 76 insertions, 0 deletions
diff --git a/include/linux/mfd/gsc.h b/include/linux/mfd/gsc.h new file mode 100644 index 000000000000..6bd639c285b4 --- /dev/null +++ b/include/linux/mfd/gsc.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2020 Gateworks Corporation + */ +#ifndef __LINUX_MFD_GSC_H_ +#define __LINUX_MFD_GSC_H_ + +#include <linux/regmap.h> + +/* Device Addresses */ +#define GSC_MISC 0x20 +#define GSC_UPDATE 0x21 +#define GSC_GPIO 0x23 +#define GSC_HWMON 0x29 +#define GSC_EEPROM0 0x50 +#define GSC_EEPROM1 0x51 +#define GSC_EEPROM2 0x52 +#define GSC_EEPROM3 0x53 +#define GSC_RTC 0x68 + +/* Register offsets */ +enum { + GSC_CTRL_0 = 0x00, + GSC_CTRL_1 = 0x01, + GSC_TIME = 0x02, + GSC_TIME_ADD = 0x06, + GSC_IRQ_STATUS = 0x0A, + GSC_IRQ_ENABLE = 0x0B, + GSC_FW_CRC = 0x0C, + GSC_FW_VER = 0x0E, + GSC_WP = 0x0F, +}; + +/* Bit definitions */ +#define GSC_CTRL_0_PB_HARD_RESET 0 +#define GSC_CTRL_0_PB_CLEAR_SECURE_KEY 1 +#define GSC_CTRL_0_PB_SOFT_POWER_DOWN 2 +#define GSC_CTRL_0_PB_BOOT_ALTERNATE 3 +#define GSC_CTRL_0_PERFORM_CRC 4 +#define GSC_CTRL_0_TAMPER_DETECT 5 +#define GSC_CTRL_0_SWITCH_HOLD 6 + +#define GSC_CTRL_1_SLEEP_ENABLE 0 +#define GSC_CTRL_1_SLEEP_ACTIVATE 1 +#define GSC_CTRL_1_SLEEP_ADD 2 +#define GSC_CTRL_1_SLEEP_NOWAKEPB 3 +#define GSC_CTRL_1_WDT_TIME 4 +#define GSC_CTRL_1_WDT_ENABLE 5 +#define GSC_CTRL_1_SWITCH_BOOT_ENABLE 6 +#define GSC_CTRL_1_SWITCH_BOOT_CLEAR 7 + +#define GSC_IRQ_PB 0 +#define GSC_IRQ_KEY_ERASED 1 +#define GSC_IRQ_EEPROM_WP 2 +#define GSC_IRQ_RESV 3 +#define GSC_IRQ_GPIO 4 +#define GSC_IRQ_TAMPER 5 +#define GSC_IRQ_WDT_TIMEOUT 6 +#define GSC_IRQ_SWITCH_HOLD 7 + +int gsc_read(void *context, unsigned int reg, unsigned int *val); +int gsc_write(void *context, unsigned int reg, unsigned int val); + +struct gsc_dev { + struct device *dev; + + struct i2c_client *i2c; /* 0x20: interrupt controller, WDT */ + struct i2c_client *i2c_hwmon; /* 0x29: hwmon, fan controller */ + + struct regmap *regmap; + + unsigned int fwver; + unsigned short fwcrc; +}; + +#endif /* __LINUX_MFD_GSC_H_ */ |