Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:

Core:
 * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
   that support Data Tag will provide increased throughput for metadata.
 * Faster detection of card removal on I/O errors.

Drivers:
 * dw_mmc now supports eMMC Power Off Notify, has PCI support, and
   implements pre_req and post_req for asynchronous requests.
 * omap_hsmmc now supports device tree.
 * esdhc now has power management support.
 * sdhci-tegra now supports Tegra30 devices.
 * sdhci-spear now supports hibernation.
 * tmio_mmc now supports using a GPIO for card detection.
 * Intel PCH now supports 8-bit bus transfers.

* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
  mmc: sh_mmcif: simplify bitmask macros
  mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
  mmc: sh_mobile_sdhi: add a callback for board specific init code
  mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
  mmc: sh_mobile_sdhi: do not manage PM clocks manually
  mmc: tmio_mmc: remove unused sdio_irq_enabled flag
  mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
  mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
  mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
  mmc: tmio: calculate the native hotplug condition only once
  mmc: simplify mmc_cd_gpio_request() by removing two parameters
  mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
  mmc: sdhci: check interrupt flags in ISR again
  mmc: sdhci-pci: Add MSI support
  mmc: core: warn when card doesn't support HPI
  mmc: davinci: Poll status for small size transfers
  mmc: davinci: Eliminate spurious interrupts
  mmc: omap_hsmmc: Avoid a regulator voltage change with dt
  mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
  ...

10 files changed, 62 insertions, 66 deletions

diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index 0dc98044d8b7..f5171dbf8850 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -1,8 +1,10 @@
 #ifndef MFD_TMIO_H
 #define MFD_TMIO_H
 
+#include <linux/device.h>
 #include <linux/fb.h>
 #include <linux/io.h>
+#include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
@@ -64,8 +66,8 @@
 #define TMIO_MMC_SDIO_IRQ		(1 << 2)
 /*
  * Some platforms can detect card insertion events with controller powered
- * down, in which case they have to call tmio_mmc_cd_wakeup() to power up the
- * controller and report the event to the driver.
+ * down, using a GPIO IRQ, in which case they have to fill in cd_irq, cd_gpio,
+ * and cd_flags fields of struct tmio_mmc_data.
  */
 #define TMIO_MMC_HAS_COLD_CD		(1 << 3)
 /*
@@ -73,6 +75,12 @@
  * idle before writing to some registers.
  */
 #define TMIO_MMC_HAS_IDLE_WAIT		(1 << 4)
+/*
+ * A GPIO is used for card hotplug detection. We need an extra flag for this,
+ * because 0 is a valid GPIO number too, and requiring users to specify
+ * cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
+ */
+#define TMIO_MMC_USE_GPIO_CD		(1 << 5)
 
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
 int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
@@ -97,19 +105,23 @@ struct tmio_mmc_data {
 	u32				ocr_mask;	/* available voltages */
 	struct tmio_mmc_dma		*dma;
 	struct device			*dev;
-	bool				power;
+	unsigned int			cd_gpio;
 	void (*set_pwr)(struct platform_device *host, int state);
 	void (*set_clk_div)(struct platform_device *host, int state);
 	int (*get_cd)(struct platform_device *host);
 	int (*write16_hook)(struct tmio_mmc_host *host, int addr);
 };
 
+/*
+ * This function is deprecated and will be removed soon. Please, convert your
+ * platform to use drivers/mmc/core/cd-gpio.c
+ */
+#include <linux/mmc/host.h>
 static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata)
 {
-	if (pdata && !pdata->power) {
-		pdata->power = true;
-		pm_runtime_get(pdata->dev);
-	}
+	if (pdata)
+		mmc_detect_change(dev_get_drvdata(pdata->dev),
+				  msecs_to_jiffies(100));
 }
 
 /*
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 6faa145c81e3..01beae78f079 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -72,6 +72,8 @@ struct mmc_ext_csd {
 	bool			hpi_en;			/* HPI enablebit */
 	bool			hpi;			/* HPI support bit */
 	unsigned int		hpi_cmd;		/* cmd used as HPI */
+	unsigned int            data_sector_size;       /* 512 bytes or 4KB */
+	unsigned int            data_tag_unit_size;     /* DATA TAG UNIT size */
 	unsigned int		boot_ro_lock;		/* ro lock support */
 	bool			boot_ro_lockable;
 	u8			raw_partition_support;	/* 160 */
diff --git a/include/linux/mmc/cd-gpio.h b/include/linux/mmc/cd-gpio.h
index a8e469783318..cefaba038ccb 100644
--- a/include/linux/mmc/cd-gpio.h
+++ b/include/linux/mmc/cd-gpio.h
@@ -12,8 +12,7 @@
 #define MMC_CD_GPIO_H
 
 struct mmc_host;
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio,
-			unsigned int irq, unsigned long flags);
+int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio);
 void mmc_cd_gpio_free(struct mmc_host *host);
 
 #endif
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 2e6a681fceb2..1b431c728b9a 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -175,7 +175,6 @@ extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int);
 
 extern int __mmc_claim_host(struct mmc_host *host, atomic_t *abort);
 extern void mmc_release_host(struct mmc_host *host);
-extern void mmc_do_release_host(struct mmc_host *host);
 extern int mmc_try_claim_host(struct mmc_host *host);
 
 extern int mmc_flush_cache(struct mmc_card *);
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index aae5d1f1bb39..8f66e28f5a0f 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -76,7 +76,7 @@ struct mmc_data;
  * @num_slots: Number of slots available.
  * @verid: Denote Version ID.
  * @data_offset: Set the offset of DATA register according to VERID.
- * @pdev: Platform device associated with the MMC controller.
+ * @dev: Device associated with the MMC controller.
  * @pdata: Platform data associated with the MMC controller.
  * @slot: Slots sharing this MMC controller.
  * @fifo_depth: depth of FIFO.
@@ -87,6 +87,8 @@ struct mmc_data;
  * @push_data: Pointer to FIFO push function.
  * @pull_data: Pointer to FIFO pull function.
  * @quirks: Set of quirks that apply to specific versions of the IP.
+ * @irq_flags: The flags to be passed to request_irq.
+ * @irq: The irq value to be passed to request_irq.
  *
  * Locking
  * =======
@@ -153,7 +155,7 @@ struct dw_mci {
 	u32			fifoth_val;
 	u16			verid;
 	u16			data_offset;
-	struct platform_device	*pdev;
+	struct device		dev;
 	struct dw_mci_board	*pdata;
 	struct dw_mci_slot	*slot[MAX_MCI_SLOTS];
 
@@ -174,6 +176,8 @@ struct dw_mci {
 	u32			quirks;
 
 	struct regulator	*vmmc;	/* Power regulator */
+	unsigned long		irq_flags; /* IRQ flags */
+	unsigned int		irq;
 };
 
 /* DMA ops for Internal/External DMAC interface */
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 91924e8c642b..cbde4b7e675e 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -81,34 +81,11 @@ struct mmc_ios {
 
 struct mmc_host_ops {
 	/*
-	 * Hosts that support power saving can use the 'enable' and 'disable'
-	 * methods to exit and enter power saving states. 'enable' is called
-	 * when the host is claimed and 'disable' is called (or scheduled with
-	 * a delay) when the host is released. The 'disable' is scheduled if
-	 * the disable delay set by 'mmc_set_disable_delay()' is non-zero,
-	 * otherwise 'disable' is called immediately. 'disable' may be
-	 * scheduled repeatedly, to permit ever greater power saving at the
-	 * expense of ever greater latency to re-enable. Rescheduling is
-	 * determined by the return value of the 'disable' method. A positive
-	 * value gives the delay in milliseconds.
-	 *
-	 * In the case where a host function (like set_ios) may be called
-	 * with or without the host claimed, enabling and disabling can be
-	 * done directly and will nest correctly. Call 'mmc_host_enable()' and
-	 * 'mmc_host_lazy_disable()' for this purpose, but note that these
-	 * functions must be paired.
-	 *
-	 * Alternatively, 'mmc_host_enable()' may be paired with
-	 * 'mmc_host_disable()' which calls 'disable' immediately.  In this
-	 * case the 'disable' method will be called with 'lazy' set to 0.
-	 * This is mainly useful for error paths.
-	 *
-	 * Because lazy disable may be called from a work queue, the 'disable'
-	 * method must claim the host when 'lazy' != 0, which will work
-	 * correctly because recursion is detected and handled.
+	 * 'enable' is called when the host is claimed and 'disable' is called
+	 * when the host is released. 'enable' and 'disable' are deprecated.
 	 */
 	int (*enable)(struct mmc_host *host);
-	int (*disable)(struct mmc_host *host, int lazy);
+	int (*disable)(struct mmc_host *host);
 	/*
 	 * It is optional for the host to implement pre_req and post_req in
 	 * order to support double buffering of requests (prepare one
@@ -219,7 +196,7 @@ struct mmc_host {
 #define MMC_CAP_SPI		(1 << 4)	/* Talks only SPI protocols */
 #define MMC_CAP_NEEDS_POLL	(1 << 5)	/* Needs polling for card-detection */
 #define MMC_CAP_8_BIT_DATA	(1 << 6)	/* Can the host do 8 bit transfers */
-#define MMC_CAP_DISABLE		(1 << 7)	/* Can the host be disabled */
+
 #define MMC_CAP_NONREMOVABLE	(1 << 8)	/* Nonremovable e.g. eMMC */
 #define MMC_CAP_WAIT_WHILE_BUSY	(1 << 9)	/* Waits while card is busy */
 #define MMC_CAP_ERASE		(1 << 10)	/* Allow erase/trim commands */
@@ -259,6 +236,8 @@ struct mmc_host {
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
 #define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
+#define MMC_CAP2_DETECT_ON_ERR	(1 << 8)	/* On I/O err check card removal */
+#define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;
@@ -301,13 +280,7 @@ struct mmc_host {
 	unsigned int		removed:1;	/* host is being removed */
 #endif
 
-	/* Only used with MMC_CAP_DISABLE */
-	int			enabled;	/* host is enabled */
 	int			rescan_disable;	/* disable card detection */
-	int			nesting_cnt;	/* "enable" nesting count */
-	int			en_dis_recurs;	/* detect recursion */
-	unsigned int		disable_delay;	/* disable delay in msecs */
-	struct delayed_work	disable;	/* disabling work */
 
 	struct mmc_card		*card;		/* device attached to this host */
 
@@ -407,17 +380,8 @@ int mmc_card_awake(struct mmc_host *host);
 int mmc_card_sleep(struct mmc_host *host);
 int mmc_card_can_sleep(struct mmc_host *host);
 
-int mmc_host_enable(struct mmc_host *host);
-int mmc_host_disable(struct mmc_host *host);
-int mmc_host_lazy_disable(struct mmc_host *host);
 int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
 
-static inline void mmc_set_disable_delay(struct mmc_host *host,
-					 unsigned int disable_delay)
-{
-	host->disable_delay = disable_delay;
-}
-
 /* Module parameter */
 extern bool mmc_assume_removable;
 
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index fb9f6e116e1c..b822a2cb6008 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -274,6 +274,7 @@ struct _mmc_csd {
 #define EXT_CSD_FLUSH_CACHE		32      /* W */
 #define EXT_CSD_CACHE_CTRL		33      /* R/W */
 #define EXT_CSD_POWER_OFF_NOTIFICATION	34	/* R/W */
+#define EXT_CSD_DATA_SECTOR_SIZE	61	/* R */
 #define EXT_CSD_GP_SIZE_MULT		143	/* R/W */
 #define EXT_CSD_PARTITION_ATTRIBUTE	156	/* R/W */
 #define EXT_CSD_PARTITION_SUPPORT	160	/* RO */
@@ -315,6 +316,8 @@ struct _mmc_csd {
 #define EXT_CSD_POWER_OFF_LONG_TIME	247	/* RO */
 #define EXT_CSD_GENERIC_CMD6_TIME	248	/* RO */
 #define EXT_CSD_CACHE_SIZE		249	/* RO, 4 bytes */
+#define EXT_CSD_TAG_UNIT_SIZE		498	/* RO */
+#define EXT_CSD_DATA_TAG_SUPPORT	499	/* RO */
 #define EXT_CSD_HPI_FEATURES		503	/* RO */
 
 /*
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index c750f85177d9..e9051e1cb1ce 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -90,6 +90,8 @@ struct sdhci_host {
 
 	unsigned int quirks2;	/* More deviations from spec. */
 
+#define SDHCI_QUIRK2_HOST_OFF_CARD_ON			(1<<0)
+
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
 
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index 04ff452bf5c3..05f0e3db1c12 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -77,18 +77,15 @@ struct sh_mmcif_plat_data {
 
 /* CE_CLK_CTRL */
 #define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
-#define CLK_CLEAR		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define CLK_SUP_PCLK		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define CLKDIV_4		(1<<16) /* mmc clock frequency.
-					 * n: bus clock/(2^(n+1)) */
-#define CLKDIV_256		(7<<16) /* mmc clock frequency. (see above) */
-#define SRSPTO_256		((1 << 13) | (0 << 12)) /* resp timeout */
-#define SRBSYTO_29		((1 << 11) | (1 << 10) |	\
-				 (1 << 9) | (1 << 8)) /* resp busy timeout */
-#define SRWDTO_29		((1 << 7) | (1 << 6) |		\
-				 (1 << 5) | (1 << 4)) /* read/write timeout */
-#define SCCSTO_29		((1 << 3) | (1 << 2) |		\
-				 (1 << 1) | (1 << 0)) /* ccs timeout */
+#define CLK_CLEAR		(0xf << 16)
+#define CLK_SUP_PCLK		(0xf << 16)
+#define CLKDIV_4		(1 << 16) /* mmc clock frequency.
+					   * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256		(7 << 16) /* mmc clock frequency. (see above) */
+#define SRSPTO_256		(2 << 12) /* resp timeout */
+#define SRBSYTO_29		(0xf << 8) /* resp busy timeout */
+#define SRWDTO_29		(0xf << 4) /* read/write timeout */
+#define SCCSTO_29		(0xf << 0) /* ccs timeout */
 
 /* CE_VERSION */
 #define SOFT_RST_ON		(1 << 31)
diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h
index 71b805451bd8..e94e620aeddc 100644
--- a/include/linux/mmc/sh_mobile_sdhi.h
+++ b/include/linux/mmc/sh_mobile_sdhi.h
@@ -10,15 +10,29 @@ struct tmio_mmc_data;
 #define SH_MOBILE_SDHI_IRQ_SDCARD	"sdcard"
 #define SH_MOBILE_SDHI_IRQ_SDIO		"sdio"
 
+/**
+ * struct sh_mobile_sdhi_ops - SDHI driver callbacks
+ * @cd_wakeup:		trigger a card-detection run
+ */
+struct sh_mobile_sdhi_ops {
+	void (*cd_wakeup)(const struct platform_device *pdev);
+};
+
 struct sh_mobile_sdhi_info {
 	int dma_slave_tx;
 	int dma_slave_rx;
 	unsigned long tmio_flags;
 	unsigned long tmio_caps;
 	u32 tmio_ocr_mask;	/* available MMC voltages */
+	unsigned int cd_gpio;
 	struct tmio_mmc_data *pdata;
 	void (*set_pwr)(struct platform_device *pdev, int state);
 	int (*get_cd)(struct platform_device *pdev);
+
+	/* callbacks for board specific setup code */
+	int (*init)(struct platform_device *pdev,
+		    const struct sh_mobile_sdhi_ops *ops);
+	void (*cleanup)(struct platform_device *pdev);
 };
 
 #endif /* LINUX_MMC_SH_MOBILE_SDHI_H */