summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-12-15 16:03:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-12-15 16:03:25 -0800
commit991688bfc63550b8c7ab9fb1de2feb44e3071d29 (patch)
tree1566341d55e1cc56bf9153bc9accc01976b7c87a /include
parent482c3e8835e9e9b325aad295c21bd9e965a11006 (diff)
parent2ada9593224ccc0f6a9368778dc55a59b92aff10 (diff)
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
Diffstat (limited to 'include')
-rw-r--r--include/dt-bindings/clock/tegra186-clock.h940
-rw-r--r--include/dt-bindings/mailbox/tegra186-hsp.h24
-rw-r--r--include/dt-bindings/pinctrl/qcom,pmic-gpio.h4
-rw-r--r--include/dt-bindings/pinctrl/qcom,pmic-mpp.h6
-rw-r--r--include/dt-bindings/power/tegra186-powergate.h39
-rw-r--r--include/dt-bindings/reset/oxsemi,ox810se.h53
-rw-r--r--include/dt-bindings/reset/oxsemi,ox820.h53
-rw-r--r--include/dt-bindings/reset/tegra186-reset.h217
-rw-r--r--include/linux/soc/qcom/wcnss_ctrl.h13
-rw-r--r--include/linux/soc/ti/ti_sci_protocol.h249
-rw-r--r--include/soc/at91/atmel-secumod.h19
-rw-r--r--include/soc/tegra/bpmp-abi.h1601
-rw-r--r--include/soc/tegra/bpmp.h141
-rw-r--r--include/soc/tegra/ivc.h109
-rw-r--r--include/soc/tegra/pmc.h126
15 files changed, 3563 insertions, 31 deletions
diff --git a/include/dt-bindings/clock/tegra186-clock.h b/include/dt-bindings/clock/tegra186-clock.h
new file mode 100644
index 000000000000..f73d32098f99
--- /dev/null
+++ b/include/dt-bindings/clock/tegra186-clock.h
@@ -0,0 +1,940 @@
+/** @file */
+
+#ifndef _MACH_T186_CLK_T186_H
+#define _MACH_T186_CLK_T186_H
+
+/**
+ * @defgroup clock_ids Clock Identifiers
+ * @{
+ * @defgroup extern_input external input clocks
+ * @{
+ * @def TEGRA186_CLK_OSC
+ * @def TEGRA186_CLK_CLK_32K
+ * @def TEGRA186_CLK_DTV_INPUT
+ * @def TEGRA186_CLK_SOR0_PAD_CLKOUT
+ * @def TEGRA186_CLK_SOR1_PAD_CLKOUT
+ * @def TEGRA186_CLK_I2S1_SYNC_INPUT
+ * @def TEGRA186_CLK_I2S2_SYNC_INPUT
+ * @def TEGRA186_CLK_I2S3_SYNC_INPUT
+ * @def TEGRA186_CLK_I2S4_SYNC_INPUT
+ * @def TEGRA186_CLK_I2S5_SYNC_INPUT
+ * @def TEGRA186_CLK_I2S6_SYNC_INPUT
+ * @def TEGRA186_CLK_SPDIFIN_SYNC_INPUT
+ * @}
+ *
+ * @defgroup extern_output external output clocks
+ * @{
+ * @def TEGRA186_CLK_EXTPERIPH1
+ * @def TEGRA186_CLK_EXTPERIPH2
+ * @def TEGRA186_CLK_EXTPERIPH3
+ * @def TEGRA186_CLK_EXTPERIPH4
+ * @}
+ *
+ * @defgroup display_clks display related clocks
+ * @{
+ * @def TEGRA186_CLK_CEC
+ * @def TEGRA186_CLK_DSIC
+ * @def TEGRA186_CLK_DSIC_LP
+ * @def TEGRA186_CLK_DSID
+ * @def TEGRA186_CLK_DSID_LP
+ * @def TEGRA186_CLK_DPAUX1
+ * @def TEGRA186_CLK_DPAUX
+ * @def TEGRA186_CLK_HDA2HDMICODEC
+ * @def TEGRA186_CLK_NVDISPLAY_DISP
+ * @def TEGRA186_CLK_NVDISPLAY_DSC
+ * @def TEGRA186_CLK_NVDISPLAY_P0
+ * @def TEGRA186_CLK_NVDISPLAY_P1
+ * @def TEGRA186_CLK_NVDISPLAY_P2
+ * @def TEGRA186_CLK_NVDISPLAYHUB
+ * @def TEGRA186_CLK_SOR_SAFE
+ * @def TEGRA186_CLK_SOR0
+ * @def TEGRA186_CLK_SOR0_OUT
+ * @def TEGRA186_CLK_SOR1
+ * @def TEGRA186_CLK_SOR1_OUT
+ * @def TEGRA186_CLK_DSI
+ * @def TEGRA186_CLK_MIPI_CAL
+ * @def TEGRA186_CLK_DSIA_LP
+ * @def TEGRA186_CLK_DSIB
+ * @def TEGRA186_CLK_DSIB_LP
+ * @}
+ *
+ * @defgroup camera_clks camera related clocks
+ * @{
+ * @def TEGRA186_CLK_NVCSI
+ * @def TEGRA186_CLK_NVCSILP
+ * @def TEGRA186_CLK_VI
+ * @}
+ *
+ * @defgroup audio_clks audio related clocks
+ * @{
+ * @def TEGRA186_CLK_ACLK
+ * @def TEGRA186_CLK_ADSP
+ * @def TEGRA186_CLK_ADSPNEON
+ * @def TEGRA186_CLK_AHUB
+ * @def TEGRA186_CLK_APE
+ * @def TEGRA186_CLK_APB2APE
+ * @def TEGRA186_CLK_AUD_MCLK
+ * @def TEGRA186_CLK_DMIC1
+ * @def TEGRA186_CLK_DMIC2
+ * @def TEGRA186_CLK_DMIC3
+ * @def TEGRA186_CLK_DMIC4
+ * @def TEGRA186_CLK_DSPK1
+ * @def TEGRA186_CLK_DSPK2
+ * @def TEGRA186_CLK_HDA
+ * @def TEGRA186_CLK_HDA2CODEC_2X
+ * @def TEGRA186_CLK_I2S1
+ * @def TEGRA186_CLK_I2S2
+ * @def TEGRA186_CLK_I2S3
+ * @def TEGRA186_CLK_I2S4
+ * @def TEGRA186_CLK_I2S5
+ * @def TEGRA186_CLK_I2S6
+ * @def TEGRA186_CLK_MAUD
+ * @def TEGRA186_CLK_PLL_A_OUT0
+ * @def TEGRA186_CLK_SPDIF_DOUBLER
+ * @def TEGRA186_CLK_SPDIF_IN
+ * @def TEGRA186_CLK_SPDIF_OUT
+ * @def TEGRA186_CLK_SYNC_DMIC1
+ * @def TEGRA186_CLK_SYNC_DMIC2
+ * @def TEGRA186_CLK_SYNC_DMIC3
+ * @def TEGRA186_CLK_SYNC_DMIC4
+ * @def TEGRA186_CLK_SYNC_DMIC5
+ * @def TEGRA186_CLK_SYNC_DSPK1
+ * @def TEGRA186_CLK_SYNC_DSPK2
+ * @def TEGRA186_CLK_SYNC_I2S1
+ * @def TEGRA186_CLK_SYNC_I2S2
+ * @def TEGRA186_CLK_SYNC_I2S3
+ * @def TEGRA186_CLK_SYNC_I2S4
+ * @def TEGRA186_CLK_SYNC_I2S5
+ * @def TEGRA186_CLK_SYNC_I2S6
+ * @def TEGRA186_CLK_SYNC_SPDIF
+ * @}
+ *
+ * @defgroup uart_clks UART clocks
+ * @{
+ * @def TEGRA186_CLK_AON_UART_FST_MIPI_CAL
+ * @def TEGRA186_CLK_UARTA
+ * @def TEGRA186_CLK_UARTB
+ * @def TEGRA186_CLK_UARTC
+ * @def TEGRA186_CLK_UARTD
+ * @def TEGRA186_CLK_UARTE
+ * @def TEGRA186_CLK_UARTF
+ * @def TEGRA186_CLK_UARTG
+ * @def TEGRA186_CLK_UART_FST_MIPI_CAL
+ * @}
+ *
+ * @defgroup i2c_clks I2C clocks
+ * @{
+ * @def TEGRA186_CLK_AON_I2C_SLOW
+ * @def TEGRA186_CLK_I2C1
+ * @def TEGRA186_CLK_I2C2
+ * @def TEGRA186_CLK_I2C3
+ * @def TEGRA186_CLK_I2C4
+ * @def TEGRA186_CLK_I2C5
+ * @def TEGRA186_CLK_I2C6
+ * @def TEGRA186_CLK_I2C8
+ * @def TEGRA186_CLK_I2C9
+ * @def TEGRA186_CLK_I2C1
+ * @def TEGRA186_CLK_I2C12
+ * @def TEGRA186_CLK_I2C13
+ * @def TEGRA186_CLK_I2C14
+ * @def TEGRA186_CLK_I2C_SLOW
+ * @def TEGRA186_CLK_VI_I2C
+ * @}
+ *
+ * @defgroup spi_clks SPI clocks
+ * @{
+ * @def TEGRA186_CLK_SPI1
+ * @def TEGRA186_CLK_SPI2
+ * @def TEGRA186_CLK_SPI3
+ * @def TEGRA186_CLK_SPI4
+ * @}
+ *
+ * @defgroup storage storage related clocks
+ * @{
+ * @def TEGRA186_CLK_SATA
+ * @def TEGRA186_CLK_SATA_OOB
+ * @def TEGRA186_CLK_SATA_IOBIST
+ * @def TEGRA186_CLK_SDMMC_LEGACY_TM
+ * @def TEGRA186_CLK_SDMMC1
+ * @def TEGRA186_CLK_SDMMC2
+ * @def TEGRA186_CLK_SDMMC3
+ * @def TEGRA186_CLK_SDMMC4
+ * @def TEGRA186_CLK_QSPI
+ * @def TEGRA186_CLK_QSPI_OUT
+ * @def TEGRA186_CLK_UFSDEV_REF
+ * @def TEGRA186_CLK_UFSHC
+ * @}
+ *
+ * @defgroup pwm_clks PWM clocks
+ * @{
+ * @def TEGRA186_CLK_PWM1
+ * @def TEGRA186_CLK_PWM2
+ * @def TEGRA186_CLK_PWM3
+ * @def TEGRA186_CLK_PWM4
+ * @def TEGRA186_CLK_PWM5
+ * @def TEGRA186_CLK_PWM6
+ * @def TEGRA186_CLK_PWM7
+ * @def TEGRA186_CLK_PWM8
+ * @}
+ *
+ * @defgroup plls PLLs and related clocks
+ * @{
+ * @def TEGRA186_CLK_PLLREFE_OUT_GATED
+ * @def TEGRA186_CLK_PLLREFE_OUT1
+ * @def TEGRA186_CLK_PLLD_OUT1
+ * @def TEGRA186_CLK_PLLP_OUT0
+ * @def TEGRA186_CLK_PLLP_OUT5
+ * @def TEGRA186_CLK_PLLA
+ * @def TEGRA186_CLK_PLLE_PWRSEQ
+ * @def TEGRA186_CLK_PLLA_OUT1
+ * @def TEGRA186_CLK_PLLREFE_REF
+ * @def TEGRA186_CLK_UPHY_PLL0_PWRSEQ
+ * @def TEGRA186_CLK_UPHY_PLL1_PWRSEQ
+ * @def TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH
+ * @def TEGRA186_CLK_PLLREFE_PEX
+ * @def TEGRA186_CLK_PLLREFE_IDDQ
+ * @def TEGRA186_CLK_PLLC_OUT_AON
+ * @def TEGRA186_CLK_PLLC_OUT_ISP
+ * @def TEGRA186_CLK_PLLC_OUT_VE
+ * @def TEGRA186_CLK_PLLC4_OUT
+ * @def TEGRA186_CLK_PLLREFE_OUT
+ * @def TEGRA186_CLK_PLLREFE_PLL_REF
+ * @def TEGRA186_CLK_PLLE
+ * @def TEGRA186_CLK_PLLC
+ * @def TEGRA186_CLK_PLLP
+ * @def TEGRA186_CLK_PLLD
+ * @def TEGRA186_CLK_PLLD2
+ * @def TEGRA186_CLK_PLLREFE_VCO
+ * @def TEGRA186_CLK_PLLC2
+ * @def TEGRA186_CLK_PLLC3
+ * @def TEGRA186_CLK_PLLDP
+ * @def TEGRA186_CLK_PLLC4_VCO
+ * @def TEGRA186_CLK_PLLA1
+ * @def TEGRA186_CLK_PLLNVCSI
+ * @def TEGRA186_CLK_PLLDISPHUB
+ * @def TEGRA186_CLK_PLLD3
+ * @def TEGRA186_CLK_PLLBPMPCAM
+ * @def TEGRA186_CLK_PLLAON
+ * @def TEGRA186_CLK_PLLU
+ * @def TEGRA186_CLK_PLLC4_VCO_DIV2
+ * @def TEGRA186_CLK_PLL_REF
+ * @def TEGRA186_CLK_PLLREFE_OUT1_DIV5
+ * @def TEGRA186_CLK_UTMIP_PLL_PWRSEQ
+ * @def TEGRA186_CLK_PLL_U_48M
+ * @def TEGRA186_CLK_PLL_U_480M
+ * @def TEGRA186_CLK_PLLC4_OUT0
+ * @def TEGRA186_CLK_PLLC4_OUT1
+ * @def TEGRA186_CLK_PLLC4_OUT2
+ * @def TEGRA186_CLK_PLLC4_OUT_MUX
+ * @def TEGRA186_CLK_DFLLDISP_DIV
+ * @def TEGRA186_CLK_PLLDISPHUB_DIV
+ * @def TEGRA186_CLK_PLLP_DIV8
+ * @}
+ *
+ * @defgroup nafll_clks NAFLL clock sources
+ * @{
+ * @def TEGRA186_CLK_NAFLL_AXI_CBB
+ * @def TEGRA186_CLK_NAFLL_BCPU
+ * @def TEGRA186_CLK_NAFLL_BPMP
+ * @def TEGRA186_CLK_NAFLL_DISP
+ * @def TEGRA186_CLK_NAFLL_GPU
+ * @def TEGRA186_CLK_NAFLL_ISP
+ * @def TEGRA186_CLK_NAFLL_MCPU
+ * @def TEGRA186_CLK_NAFLL_NVDEC
+ * @def TEGRA186_CLK_NAFLL_NVENC
+ * @def TEGRA186_CLK_NAFLL_NVJPG
+ * @def TEGRA186_CLK_NAFLL_SCE
+ * @def TEGRA186_CLK_NAFLL_SE
+ * @def TEGRA186_CLK_NAFLL_TSEC
+ * @def TEGRA186_CLK_NAFLL_TSECB
+ * @def TEGRA186_CLK_NAFLL_VI
+ * @def TEGRA186_CLK_NAFLL_VIC
+ * @}
+ *
+ * @defgroup mphy MPHY related clocks
+ * @{
+ * @def TEGRA186_CLK_MPHY_L0_RX_SYMB
+ * @def TEGRA186_CLK_MPHY_L0_RX_LS_BIT
+ * @def TEGRA186_CLK_MPHY_L0_TX_SYMB
+ * @def TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT
+ * @def TEGRA186_CLK_MPHY_L0_RX_ANA
+ * @def TEGRA186_CLK_MPHY_L1_RX_ANA
+ * @def TEGRA186_CLK_MPHY_IOBIST
+ * @def TEGRA186_CLK_MPHY_TX_1MHZ_REF
+ * @def TEGRA186_CLK_MPHY_CORE_PLL_FIXED
+ * @}
+ *
+ * @defgroup eavb EAVB related clocks
+ * @{
+ * @def TEGRA186_CLK_EQOS_AXI
+ * @def TEGRA186_CLK_EQOS_PTP_REF
+ * @def TEGRA186_CLK_EQOS_RX
+ * @def TEGRA186_CLK_EQOS_RX_INPUT
+ * @def TEGRA186_CLK_EQOS_TX
+ * @}
+ *
+ * @defgroup usb USB related clocks
+ * @{
+ * @def TEGRA186_CLK_PEX_USB_PAD0_MGMT
+ * @def TEGRA186_CLK_PEX_USB_PAD1_MGMT
+ * @def TEGRA186_CLK_HSIC_TRK
+ * @def TEGRA186_CLK_USB2_TRK
+ * @def TEGRA186_CLK_USB2_HSIC_TRK
+ * @def TEGRA186_CLK_XUSB_CORE_SS
+ * @def TEGRA186_CLK_XUSB_CORE_DEV
+ * @def TEGRA186_CLK_XUSB_FALCON
+ * @def TEGRA186_CLK_XUSB_FS
+ * @def TEGRA186_CLK_XUSB
+ * @def TEGRA186_CLK_XUSB_DEV
+ * @def TEGRA186_CLK_XUSB_HOST
+ * @def TEGRA186_CLK_XUSB_SS
+ * @}
+ *
+ * @defgroup bigblock compute block related clocks
+ * @{
+ * @def TEGRA186_CLK_GPCCLK
+ * @def TEGRA186_CLK_GPC2CLK
+ * @def TEGRA186_CLK_GPU
+ * @def TEGRA186_CLK_HOST1X
+ * @def TEGRA186_CLK_ISP
+ * @def TEGRA186_CLK_NVDEC
+ * @def TEGRA186_CLK_NVENC
+ * @def TEGRA186_CLK_NVJPG
+ * @def TEGRA186_CLK_SE
+ * @def TEGRA186_CLK_TSEC
+ * @def TEGRA186_CLK_TSECB
+ * @def TEGRA186_CLK_VIC
+ * @}
+ *
+ * @defgroup can CAN bus related clocks
+ * @{
+ * @def TEGRA186_CLK_CAN1
+ * @def TEGRA186_CLK_CAN1_HOST
+ * @def TEGRA186_CLK_CAN2
+ * @def TEGRA186_CLK_CAN2_HOST
+ * @}
+ *
+ * @defgroup system basic system clocks
+ * @{
+ * @def TEGRA186_CLK_ACTMON
+ * @def TEGRA186_CLK_AON_APB
+ * @def TEGRA186_CLK_AON_CPU_NIC
+ * @def TEGRA186_CLK_AON_NIC
+ * @def TEGRA186_CLK_AXI_CBB
+ * @def TEGRA186_CLK_BPMP_APB
+ * @def TEGRA186_CLK_BPMP_CPU_NIC
+ * @def TEGRA186_CLK_BPMP_NIC_RATE
+ * @def TEGRA186_CLK_CLK_M
+ * @def TEGRA186_CLK_EMC
+ * @def TEGRA186_CLK_MSS_ENCRYPT
+ * @def TEGRA186_CLK_SCE_APB
+ * @def TEGRA186_CLK_SCE_CPU_NIC
+ * @def TEGRA186_CLK_SCE_NIC
+ * @def TEGRA186_CLK_TSC
+ * @}
+ *
+ * @defgroup pcie_clks PCIe related clocks
+ * @{
+ * @def TEGRA186_CLK_AFI
+ * @def TEGRA186_CLK_PCIE
+ * @def TEGRA186_CLK_PCIE2_IOBIST
+ * @def TEGRA186_CLK_PCIERX0
+ * @def TEGRA186_CLK_PCIERX1
+ * @def TEGRA186_CLK_PCIERX2
+ * @def TEGRA186_CLK_PCIERX3
+ * @def TEGRA186_CLK_PCIERX4
+ * @}
+ */
+
+/** @brief output of gate CLK_ENB_FUSE */
+#define TEGRA186_CLK_FUSE 0
+/**
+ * @brief It's not what you think
+ * @details output of gate CLK_ENB_GPU. This output connects to the GPU
+ * pwrclk. @warning: This is almost certainly not the clock you think
+ * it is. If you're looking for the clock of the graphics engine, see
+ * TEGRA186_GPCCLK
+ */
+#define TEGRA186_CLK_GPU 1
+/** @brief output of gate CLK_ENB_PCIE */
+#define TEGRA186_CLK_PCIE 3
+/** @brief output of the divider IPFS_CLK_DIVISOR */
+#define TEGRA186_CLK_AFI 4
+/** @brief output of gate CLK_ENB_PCIE2_IOBIST */
+#define TEGRA186_CLK_PCIE2_IOBIST 5
+/** @brief output of gate CLK_ENB_PCIERX0*/
+#define TEGRA186_CLK_PCIERX0 6
+/** @brief output of gate CLK_ENB_PCIERX1*/
+#define TEGRA186_CLK_PCIERX1 7
+/** @brief output of gate CLK_ENB_PCIERX2*/
+#define TEGRA186_CLK_PCIERX2 8
+/** @brief output of gate CLK_ENB_PCIERX3*/
+#define TEGRA186_CLK_PCIERX3 9
+/** @brief output of gate CLK_ENB_PCIERX4*/
+#define TEGRA186_CLK_PCIERX4 10
+/** @brief output branch of PLL_C for ISP, controlled by gate CLK_ENB_PLLC_OUT_ISP */
+#define TEGRA186_CLK_PLLC_OUT_ISP 11
+/** @brief output branch of PLL_C for VI, controlled by gate CLK_ENB_PLLC_OUT_VE */
+#define TEGRA186_CLK_PLLC_OUT_VE 12
+/** @brief output branch of PLL_C for AON domain, controlled by gate CLK_ENB_PLLC_OUT_AON */
+#define TEGRA186_CLK_PLLC_OUT_AON 13
+/** @brief output of gate CLK_ENB_SOR_SAFE */
+#define TEGRA186_CLK_SOR_SAFE 39
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S2 */
+#define TEGRA186_CLK_I2S2 42
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S3 */
+#define TEGRA186_CLK_I2S3 43
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDF_IN */
+#define TEGRA186_CLK_SPDIF_IN 44
+/** @brief output of gate CLK_ENB_SPDIF_DOUBLER */
+#define TEGRA186_CLK_SPDIF_DOUBLER 45
+/** @clkdesc{spi_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_SPI3} */
+#define TEGRA186_CLK_SPI3 46
+/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1} */
+#define TEGRA186_CLK_I2C1 47
+/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5} */
+#define TEGRA186_CLK_I2C5 48
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */
+#define TEGRA186_CLK_SPI1 49
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */
+#define TEGRA186_CLK_ISP 50
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */
+#define TEGRA186_CLK_VI 51
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */
+#define TEGRA186_CLK_SDMMC1 52
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 */
+#define TEGRA186_CLK_SDMMC2 53
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */
+#define TEGRA186_CLK_SDMMC4 54
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */
+#define TEGRA186_CLK_UARTA 55
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */
+#define TEGRA186_CLK_UARTB 56
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */
+#define TEGRA186_CLK_HOST1X 57
+/**
+ * @brief controls the EMC clock frequency.
+ * @details Doing a clk_set_rate on this clock will select the
+ * appropriate clock source, program the source rate and execute a
+ * specific sequence to switch to the new clock source for both memory
+ * controllers. This can be used to control the balance between memory
+ * throughput and memory controller power.
+ */
+#define TEGRA186_CLK_EMC 58
+/* @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */
+#define TEGRA186_CLK_EXTPERIPH4 73
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */
+#define TEGRA186_CLK_SPI4 74
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 */
+#define TEGRA186_CLK_I2C3 75
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 */
+#define TEGRA186_CLK_SDMMC3 76
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */
+#define TEGRA186_CLK_UARTD 77
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S1 */
+#define TEGRA186_CLK_I2S1 79
+/** output of gate CLK_ENB_DTV */
+#define TEGRA186_CLK_DTV 80
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */
+#define TEGRA186_CLK_TSEC 81
+/** @brief output of gate CLK_ENB_DP2 */
+#define TEGRA186_CLK_DP2 82
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S4 */
+#define TEGRA186_CLK_I2S4 84
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S5 */
+#define TEGRA186_CLK_I2S5 85
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 */
+#define TEGRA186_CLK_I2C4 86
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */
+#define TEGRA186_CLK_AHUB 87
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */
+#define TEGRA186_CLK_HDA2CODEC_2X 88
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */
+#define TEGRA186_CLK_EXTPERIPH1 89
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */
+#define TEGRA186_CLK_EXTPERIPH2 90
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */
+#define TEGRA186_CLK_EXTPERIPH3 91
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */
+#define TEGRA186_CLK_I2C_SLOW 92
+/** @brief output of the SOR1_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */
+#define TEGRA186_CLK_SOR1 93
+/** @brief output of gate CLK_ENB_CEC */
+#define TEGRA186_CLK_CEC 94
+/** @brief output of gate CLK_ENB_DPAUX1 */
+#define TEGRA186_CLK_DPAUX1 95
+/** @brief output of gate CLK_ENB_DPAUX */
+#define TEGRA186_CLK_DPAUX 96
+/** @brief output of the SOR0_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */
+#define TEGRA186_CLK_SOR0 97
+/** @brief output of gate CLK_ENB_HDA2HDMICODEC */
+#define TEGRA186_CLK_HDA2HDMICODEC 98
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SATA */
+#define TEGRA186_CLK_SATA 99
+/** @brief output of gate CLK_ENB_SATA_OOB */
+#define TEGRA186_CLK_SATA_OOB 100
+/** @brief output of gate CLK_ENB_SATA_IOBIST */
+#define TEGRA186_CLK_SATA_IOBIST 101
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA */
+#define TEGRA186_CLK_HDA 102
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SE */
+#define TEGRA186_CLK_SE 103
+/** @brief output of gate CLK_ENB_APB2APE */
+#define TEGRA186_CLK_APB2APE 104
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_APE */
+#define TEGRA186_CLK_APE 105
+/** @brief output of gate CLK_ENB_IQC1 */
+#define TEGRA186_CLK_IQC1 106
+/** @brief output of gate CLK_ENB_IQC2 */
+#define TEGRA186_CLK_IQC2 107
+/** divide by 2 version of TEGRA186_CLK_PLLREFE_VCO */
+#define TEGRA186_CLK_PLLREFE_OUT 108
+/** @brief output of gate CLK_ENB_PLLREFE_PLL_REF */
+#define TEGRA186_CLK_PLLREFE_PLL_REF 109
+/** @brief output of gate CLK_ENB_PLLC4_OUT */
+#define TEGRA186_CLK_PLLC4_OUT 110
+/** @brief output of mux xusb_core_clk_switch on page 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB 111
+/** controls xusb_dev_ce signal on page 66 and 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_DEV 112
+/** controls xusb_host_ce signal on page 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_HOST 113
+/** controls xusb_ss_ce signal on page 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_SS 114
+/** @brief output of gate CLK_ENB_DSI */
+#define TEGRA186_CLK_DSI 115
+/** @brief output of gate CLK_ENB_MIPI_CAL */
+#define TEGRA186_CLK_MIPI_CAL 116
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP */
+#define TEGRA186_CLK_DSIA_LP 117
+/** @brief output of gate CLK_ENB_DSIB */
+#define TEGRA186_CLK_DSIB 118
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIB_LP */
+#define TEGRA186_CLK_DSIB_LP 119
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */
+#define TEGRA186_CLK_DMIC1 122
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */
+#define TEGRA186_CLK_DMIC2 123
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */
+#define TEGRA186_CLK_AUD_MCLK 124
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */
+#define TEGRA186_CLK_I2C6 125
+/**output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */
+#define TEGRA186_CLK_UART_FST_MIPI_CAL 126
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */
+#define TEGRA186_CLK_VIC 127
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM */
+#define TEGRA186_CLK_SDMMC_LEGACY_TM 128
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */
+#define TEGRA186_CLK_NVDEC 129
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */
+#define TEGRA186_CLK_NVJPG 130
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */
+#define TEGRA186_CLK_NVENC 131
+/** @brief output of the QSPI_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */
+#define TEGRA186_CLK_QSPI 132
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI_I2C */
+#define TEGRA186_CLK_VI_I2C 133
+/** @brief output of gate CLK_ENB_HSIC_TRK */
+#define TEGRA186_CLK_HSIC_TRK 134
+/** @brief output of gate CLK_ENB_USB2_TRK */
+#define TEGRA186_CLK_USB2_TRK 135
+/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MAUD */
+#define TEGRA186_CLK_MAUD 136
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSECB */
+#define TEGRA186_CLK_TSECB 137
+/** @brief output of gate CLK_ENB_ADSP */
+#define TEGRA186_CLK_ADSP 138
+/** @brief output of gate CLK_ENB_ADSPNEON */
+#define TEGRA186_CLK_ADSPNEON 139
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */
+#define TEGRA186_CLK_MPHY_L0_RX_SYMB 140
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */
+#define TEGRA186_CLK_MPHY_L0_RX_LS_BIT 141
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */
+#define TEGRA186_CLK_MPHY_L0_TX_SYMB 142
+/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */
+#define TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT 143
+/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */
+#define TEGRA186_CLK_MPHY_L0_RX_ANA 144
+/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */
+#define TEGRA186_CLK_MPHY_L1_RX_ANA 145
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_IOBIST */
+#define TEGRA186_CLK_MPHY_IOBIST 146
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */
+#define TEGRA186_CLK_MPHY_TX_1MHZ_REF 147
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */
+#define TEGRA186_CLK_MPHY_CORE_PLL_FIXED 148
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */
+#define TEGRA186_CLK_AXI_CBB 149
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC3 */
+#define TEGRA186_CLK_DMIC3 150
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */
+#define TEGRA186_CLK_DMIC4 151
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */
+#define TEGRA186_CLK_DSPK1 152
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */
+#define TEGRA186_CLK_DSPK2 153
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */
+#define TEGRA186_CLK_I2S6 154
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P0 */
+#define TEGRA186_CLK_NVDISPLAY_P0 155
+/** @brief output of the NVDISPLAY_DISP_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP */
+#define TEGRA186_CLK_NVDISPLAY_DISP 156
+/** @brief output of gate CLK_ENB_NVDISPLAY_DSC */
+#define TEGRA186_CLK_NVDISPLAY_DSC 157
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAYHUB */
+#define TEGRA186_CLK_NVDISPLAYHUB 158
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P1 */
+#define TEGRA186_CLK_NVDISPLAY_P1 159
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P2 */
+#define TEGRA186_CLK_NVDISPLAY_P2 160
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH */
+#define TEGRA186_CLK_TACH 166
+/** @brief output of gate CLK_ENB_EQOS */
+#define TEGRA186_CLK_EQOS_AXI 167
+/** @brief output of gate CLK_ENB_EQOS_RX */
+#define TEGRA186_CLK_EQOS_RX 168
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */
+#define TEGRA186_CLK_UFSHC 178
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */
+#define TEGRA186_CLK_UFSDEV_REF 179
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */
+#define TEGRA186_CLK_NVCSI 180
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */
+#define TEGRA186_CLK_NVCSILP 181
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C7 */
+#define TEGRA186_CLK_I2C7 182
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C9 */
+#define TEGRA186_CLK_I2C9 183
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C12 */
+#define TEGRA186_CLK_I2C12 184
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C13 */
+#define TEGRA186_CLK_I2C13 185
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C14 */
+#define TEGRA186_CLK_I2C14 186
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */
+#define TEGRA186_CLK_PWM1 187
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM2 */
+#define TEGRA186_CLK_PWM2 188
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM3 */
+#define TEGRA186_CLK_PWM3 189
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM5 */
+#define TEGRA186_CLK_PWM5 190
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM6 */
+#define TEGRA186_CLK_PWM6 191
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM7 */
+#define TEGRA186_CLK_PWM7 192
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */
+#define TEGRA186_CLK_PWM8 193
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */
+#define TEGRA186_CLK_UARTE 194
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */
+#define TEGRA186_CLK_UARTF 195
+/** @deprecated */
+#define TEGRA186_CLK_DBGAPB 196
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC */
+#define TEGRA186_CLK_BPMP_CPU_NIC 197
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_APB */
+#define TEGRA186_CLK_BPMP_APB 199
+/** @brief output of mux controlled by TEGRA186_CLK_SOC_ACTMON */
+#define TEGRA186_CLK_ACTMON 201
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC */
+#define TEGRA186_CLK_AON_CPU_NIC 208
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */
+#define TEGRA186_CLK_CAN1 210
+/** @brief output of gate CLK_ENB_CAN1_HOST */
+#define TEGRA186_CLK_CAN1_HOST 211
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */
+#define TEGRA186_CLK_CAN2 212
+/** @brief output of gate CLK_ENB_CAN2_HOST */
+#define TEGRA186_CLK_CAN2_HOST 213
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB */
+#define TEGRA186_CLK_AON_APB 214
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */
+#define TEGRA186_CLK_UARTC 215
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTG */
+#define TEGRA186_CLK_UARTG 216
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */
+#define TEGRA186_CLK_AON_UART_FST_MIPI_CAL 217
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */
+#define TEGRA186_CLK_I2C2 218
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C8 */
+#define TEGRA186_CLK_I2C8 219
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C10 */
+#define TEGRA186_CLK_I2C10 220
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW */
+#define TEGRA186_CLK_AON_I2C_SLOW 221
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */
+#define TEGRA186_CLK_SPI2 222
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */
+#define TEGRA186_CLK_DMIC5 223
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH */
+#define TEGRA186_CLK_AON_TOUCH 224
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM4 */
+#define TEGRA186_CLK_PWM4 225
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSC. This clock object is read only and is used for all timers in the system. */
+#define TEGRA186_CLK_TSC 226
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT */
+#define TEGRA186_CLK_MSS_ENCRYPT 227
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */
+#define TEGRA186_CLK_SCE_CPU_NIC 228
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_APB */
+#define TEGRA186_CLK_SCE_APB 230
+/** @brief output of gate CLK_ENB_DSIC */
+#define TEGRA186_CLK_DSIC 231
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIC_LP */
+#define TEGRA186_CLK_DSIC_LP 232
+/** @brief output of gate CLK_ENB_DSID */
+#define TEGRA186_CLK_DSID 233
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSID_LP */
+#define TEGRA186_CLK_DSID_LP 234
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP */
+#define TEGRA186_CLK_PEX_SATA_USB_RX_BYP 236
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDIF_OUT */
+#define TEGRA186_CLK_SPDIF_OUT 238
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 */
+#define TEGRA186_CLK_EQOS_PTP_REF 239
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK */
+#define TEGRA186_CLK_EQOS_TX 240
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK */
+#define TEGRA186_CLK_USB2_HSIC_TRK 241
+/** @brief output of mux xusb_ss_clk_switch on page 66 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_CORE_SS 242
+/** @brief output of mux xusb_core_dev_clk_switch on page 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_CORE_DEV 243
+/** @brief output of mux xusb_core_falcon_clk_switch on page 67 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_FALCON 244
+/** @brief output of mux xusb_fs_clk_switch on page 66 of T186_Clocks_IAS.doc */
+#define TEGRA186_CLK_XUSB_FS 245
+/** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */
+#define TEGRA186_CLK_PLL_A_OUT0 246
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S1 */
+#define TEGRA186_CLK_SYNC_I2S1 247
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S2 */
+#define TEGRA186_CLK_SYNC_I2S2 248
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S3 */
+#define TEGRA186_CLK_SYNC_I2S3 249
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S4 */
+#define TEGRA186_CLK_SYNC_I2S4 250
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S5 */
+#define TEGRA186_CLK_SYNC_I2S5 251
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */
+#define TEGRA186_CLK_SYNC_I2S6 252
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK1 */
+#define TEGRA186_CLK_SYNC_DSPK1 253
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK2 */
+#define TEGRA186_CLK_SYNC_DSPK2 254
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */
+#define TEGRA186_CLK_SYNC_DMIC1 255
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */
+#define TEGRA186_CLK_SYNC_DMIC2 256
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC3 */
+#define TEGRA186_CLK_SYNC_DMIC3 257
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC4 */
+#define TEGRA186_CLK_SYNC_DMIC4 259
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_SPDIF */
+#define TEGRA186_CLK_SYNC_SPDIF 260
+/** @brief output of gate CLK_ENB_PLLREFE_OUT */
+#define TEGRA186_CLK_PLLREFE_OUT_GATED 261
+/** @brief output of the divider PLLREFE_DIVP in CLK_RST_CONTROLLER_PLLREFE_BASE. PLLREFE has 2 outputs:
+ * * VCO/pdiv defined by this clock object
+ * * VCO/2 defined by TEGRA186_CLK_PLLREFE_OUT
+ */
+#define TEGRA186_CLK_PLLREFE_OUT1 262
+#define TEGRA186_CLK_PLLD_OUT1 267
+/** @brief output of the divider PLLP_DIVP in CLK_RST_CONTROLLER_PLLP_BASE */
+#define TEGRA186_CLK_PLLP_OUT0 269
+/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTC */
+#define TEGRA186_CLK_PLLP_OUT5 270
+/** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */
+#define TEGRA186_CLK_PLLA 271
+/** @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY divided by the divider controlled by ACLK_CLK_DIVISOR in CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER */
+#define TEGRA186_CLK_ACLK 273
+/** fixed 48MHz clock divided down from TEGRA186_CLK_PLL_U */
+#define TEGRA186_CLK_PLL_U_48M 274
+/** fixed 480MHz clock divided down from TEGRA186_CLK_PLL_U */
+#define TEGRA186_CLK_PLL_U_480M 275
+/** @brief output of the divider PLLC4_DIVP in CLK_RST_CONTROLLER_PLLC4_BASE. Output frequency is TEGRA186_CLK_PLLC4_VCO/PLLC4_DIVP */
+#define TEGRA186_CLK_PLLC4_OUT0 276
+/** fixed /3 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/3 */
+#define TEGRA186_CLK_PLLC4_OUT1 277
+/** fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/5 */
+#define TEGRA186_CLK_PLLC4_OUT2 278
+/** @brief output of mux controlled by PLLC4_CLK_SEL in CLK_RST_CONTROLLER_PLLC4_MISC1 */
+#define TEGRA186_CLK_PLLC4_OUT_MUX 279
+/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when DFLLDISP_DIV is selected in NVDISPLAY_DISP_CLK_SRC */
+#define TEGRA186_CLK_DFLLDISP_DIV 284
+/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when PLLDISPHUB_DIV is selected in NVDISPLAY_DISP_CLK_SRC */
+#define TEGRA186_CLK_PLLDISPHUB_DIV 285
+/** fixed /8 divider which is used as the input for TEGRA186_CLK_SOR_SAFE */
+#define TEGRA186_CLK_PLLP_DIV8 286
+/** @brief output of divider CLK_RST_CONTROLLER_BPMP_NIC_RATE */
+#define TEGRA186_CLK_BPMP_NIC 287
+/** @brief output of the divider CLK_RST_CONTROLLER_PLLA1_OUT1 */
+#define TEGRA186_CLK_PLL_A_OUT1 288
+/** @deprecated */
+#define TEGRA186_CLK_GPC2CLK 289
+/** A fake clock which must be enabled during KFUSE read operations to ensure adequate VDD_CORE voltage. */
+#define TEGRA186_CLK_KFUSE 293
+/**
+ * @brief controls the PLLE hardware sequencer.
+ * @details This clock only has enable and disable methods. When the
+ * PLLE hw sequencer is enabled, PLLE, will be enabled or disabled by
+ * hw based on the control signals from the PCIe, SATA and XUSB
+ * clocks. When the PLLE hw sequencer is disabled, the state of PLLE
+ * is controlled by sw using clk_enable/clk_disable on
+ * TEGRA186_CLK_PLLE.
+ */
+#define TEGRA186_CLK_PLLE_PWRSEQ 294
+/** fixed 60MHz clock divided down from, TEGRA186_CLK_PLL_U */
+#define TEGRA186_CLK_PLLREFE_REF 295
+/** @brief output of mux controlled by SOR0_CLK_SEL0 and SOR0_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */
+#define TEGRA186_CLK_SOR0_OUT 296
+/** @brief output of mux controlled by SOR1_CLK_SEL0 and SOR1_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */
+#define TEGRA186_CLK_SOR1_OUT 297
+/** @brief fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLREFE_OUT1/5. Used as input for TEGRA186_CLK_EQOS_AXI */
+#define TEGRA186_CLK_PLLREFE_OUT1_DIV5 298
+/** @brief controls the UTMIP_PLL (aka PLLU) hardware sqeuencer */
+#define TEGRA186_CLK_UTMIP_PLL_PWRSEQ 301
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT */
+#define TEGRA186_CLK_PEX_USB_PAD0_MGMT 302
+/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT */
+#define TEGRA186_CLK_PEX_USB_PAD1_MGMT 303
+/** @brief controls the UPHY_PLL0 hardware sqeuencer */
+#define TEGRA186_CLK_UPHY_PLL0_PWRSEQ 304
+/** @brief controls the UPHY_PLL1 hardware sqeuencer */
+#define TEGRA186_CLK_UPHY_PLL1_PWRSEQ 305
+/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC so the bypass output even be used when the PLL is disabled */
+#define TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH 306
+/** @brief output of the mux controlled by PLLREFE_SEL_CLKIN_PEX in CLK_RST_CONTROLLER_PLLREFE_MISC */
+#define TEGRA186_CLK_PLLREFE_PEX 307
+/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC to turn on the PLL when enabled */
+#define TEGRA186_CLK_PLLREFE_IDDQ 308
+/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */
+#define TEGRA186_CLK_QSPI_OUT 309
+/**
+ * @brief GPC2CLK-div-2
+ * @details fixed /2 divider. Output frequency is
+ * TEGRA186_CLK_GPC2CLK/2. The frequency of this clock is the
+ * frequency at which the GPU graphics engine runs. */
+#define TEGRA186_CLK_GPCCLK 310
+/** @brief output of divider CLK_RST_CONTROLLER_AON_NIC_RATE */
+#define TEGRA186_CLK_AON_NIC 450
+/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */
+#define TEGRA186_CLK_SCE_NIC 451
+/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */
+#define TEGRA186_CLK_PLLE 512
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */
+#define TEGRA186_CLK_PLLC 513
+/** Fixed 408MHz PLL for use by peripheral clocks */
+#define TEGRA186_CLK_PLLP 516
+/** @deprecated */
+#define TEGRA186_CLK_PLL_P TEGRA186_CLK_PLLP
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD_BASE for use by DSI */
+#define TEGRA186_CLK_PLLD 518
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD2_BASE for use by HDMI or DP */
+#define TEGRA186_CLK_PLLD2 519
+/**
+ * @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE.
+ * @details Note that this clock only controls the VCO output, before
+ * the post-divider. See TEGRA186_CLK_PLLREFE_OUT1 for more
+ * information.
+ */
+#define TEGRA186_CLK_PLLREFE_VCO 520
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */
+#define TEGRA186_CLK_PLLC2 521
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC3_BASE */
+#define TEGRA186_CLK_PLLC3 522
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDP_BASE for use as the DP link clock */
+#define TEGRA186_CLK_PLLDP 523
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */
+#define TEGRA186_CLK_PLLC4_VCO 524
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */
+#define TEGRA186_CLK_PLLA1 525
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE */
+#define TEGRA186_CLK_PLLNVCSI 526
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDISPHUB_BASE */
+#define TEGRA186_CLK_PLLDISPHUB 527
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD3_BASE for use by HDMI or DP */
+#define TEGRA186_CLK_PLLD3 528
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLBPMPCAM_BASE */
+#define TEGRA186_CLK_PLLBPMPCAM 531
+/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */
+#define TEGRA186_CLK_PLLAON 532
+/** Fixed frequency 960MHz PLL for USB and EAVB */
+#define TEGRA186_CLK_PLLU 533
+/** fixed /2 divider. Output frequency is TEGRA186_CLK_PLLC4_VCO/2 */
+#define TEGRA186_CLK_PLLC4_VCO_DIV2 535
+/** @brief NAFLL clock source for AXI_CBB */
+#define TEGRA186_CLK_NAFLL_AXI_CBB 564
+/** @brief NAFLL clock source for BPMP */
+#define TEGRA186_CLK_NAFLL_BPMP 565
+/** @brief NAFLL clock source for ISP */
+#define TEGRA186_CLK_NAFLL_ISP 566
+/** @brief NAFLL clock source for NVDEC */
+#define TEGRA186_CLK_NAFLL_NVDEC 567
+/** @brief NAFLL clock source for NVENC */
+#define TEGRA186_CLK_NAFLL_NVENC 568
+/** @brief NAFLL clock source for NVJPG */
+#define TEGRA186_CLK_NAFLL_NVJPG 569
+/** @brief NAFLL clock source for SCE */
+#define TEGRA186_CLK_NAFLL_SCE 570
+/** @brief NAFLL clock source for SE */
+#define TEGRA186_CLK_NAFLL_SE 571
+/** @brief NAFLL clock source for TSEC */
+#define TEGRA186_CLK_NAFLL_TSEC 572
+/** @brief NAFLL clock source for TSECB */
+#define TEGRA186_CLK_NAFLL_TSECB 573
+/** @brief NAFLL clock source for VI */
+#define TEGRA186_CLK_NAFLL_VI 574
+/** @brief NAFLL clock source for VIC */
+#define TEGRA186_CLK_NAFLL_VIC 575
+/** @brief NAFLL clock source for DISP */
+#define TEGRA186_CLK_NAFLL_DISP 576
+/** @brief NAFLL clock source for GPU */
+#define TEGRA186_CLK_NAFLL_GPU 577
+/** @brief NAFLL clock source for M-CPU cluster */
+#define TEGRA186_CLK_NAFLL_MCPU 578
+/** @brief NAFLL clock source for B-CPU cluster */
+#define TEGRA186_CLK_NAFLL_BCPU 579
+/** @brief input from Tegra's CLK_32K_IN pad */
+#define TEGRA186_CLK_CLK_32K 608
+/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */
+#define TEGRA186_CLK_CLK_M 609
+/** @brief output of divider PLL_REF_DIV in CLK_RST_CONTROLLER_OSC_CTRL */
+#define TEGRA186_CLK_PLL_REF 610
+/** @brief input from Tegra's XTAL_IN */
+#define TEGRA186_CLK_OSC 612
+/** @brief clock recovered from EAVB input */
+#define TEGRA186_CLK_EQOS_RX_INPUT 613
+/** @brief clock recovered from DTV input */
+#define TEGRA186_CLK_DTV_INPUT 614
+/** @brief SOR0 brick output which feeds into SOR0_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0*/
+#define TEGRA186_CLK_SOR0_PAD_CLKOUT 615
+/** @brief SOR1 brick output which feeds into SOR1_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1*/
+#define TEGRA186_CLK_SOR1_PAD_CLKOUT 616
+/** @brief clock recovered from I2S1 input */
+#define TEGRA186_CLK_I2S1_SYNC_INPUT 617
+/** @brief clock recovered from I2S2 input */
+#define TEGRA186_CLK_I2S2_SYNC_INPUT 618
+/** @brief clock recovered from I2S3 input */
+#define TEGRA186_CLK_I2S3_SYNC_INPUT 619
+/** @brief clock recovered from I2S4 input */
+#define TEGRA186_CLK_I2S4_SYNC_INPUT 620
+/** @brief clock recovered from I2S5 input */
+#define TEGRA186_CLK_I2S5_SYNC_INPUT 621
+/** @brief clock recovered from I2S6 input */
+#define TEGRA186_CLK_I2S6_SYNC_INPUT 622
+/** @brief clock recovered from SPDIFIN input */
+#define TEGRA186_CLK_SPDIFIN_SYNC_INPUT 623
+
+/**
+ * @brief subject to change
+ * @details maximum clock identifier value plus one.
+ */
+#define TEGRA186_CLK_CLK_MAX 624
+
+/** @} */
+
+#endif
diff --git a/include/dt-bindings/mailbox/tegra186-hsp.h b/include/dt-bindings/mailbox/tegra186-hsp.h
new file mode 100644
index 000000000000..f5d66e5f5f10
--- /dev/null
+++ b/include/dt-bindings/mailbox/tegra186-hsp.h
@@ -0,0 +1,24 @@
+/*
+ * This header provides constants for binding nvidia,tegra186-hsp.
+ */
+
+#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H
+
+/*
+ * These define the type of mailbox that is to be used (doorbell, shared
+ * mailbox, shared semaphore or arbitrated semaphore).
+ */
+#define TEGRA_HSP_MBOX_TYPE_DB 0x0
+#define TEGRA_HSP_MBOX_TYPE_SM 0x1
+#define TEGRA_HSP_MBOX_TYPE_SS 0x2
+#define TEGRA_HSP_MBOX_TYPE_AS 0x3
+
+/*
+ * These defines represent the bit associated with the given master ID in the
+ * doorbell registers.
+ */
+#define TEGRA_HSP_DB_MASTER_CCPLEX 17
+#define TEGRA_HSP_DB_MASTER_BPMP 19
+
+#endif
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
index aafa76cb569d..d33f17c8a515 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -89,6 +89,10 @@
#define PMA8084_GPIO_S4 2
#define PMA8084_GPIO_L6 3
+#define PM8994_GPIO_VPH 0
+#define PM8994_GPIO_S4 2
+#define PM8994_GPIO_L12 3
+
/* To be used with "function" */
#define PMIC_GPIO_FUNC_NORMAL "normal"
#define PMIC_GPIO_FUNC_PAIRED "paired"
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
index a15c1704d0ec..2e360d8f7801 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
@@ -65,6 +65,12 @@
#define PMA8084_MPP_S4 2
#define PMA8084_MPP_L6 3
+#define PM8994_MPP_VPH 0
+/* Only supported for MPP_05-MPP_08 */
+#define PM8994_MPP_L19 1
+#define PM8994_MPP_S4 2
+#define PM8994_MPP_L12 3
+
/*
* Analog Input - Set the source for analog input.
* To be used with "qcom,amux-route" property
diff --git a/include/dt-bindings/power/tegra186-powergate.h b/include/dt-bindings/power/tegra186-powergate.h
new file mode 100644
index 000000000000..388d6e228dc8
--- /dev/null
+++ b/include/dt-bindings/power/tegra186-powergate.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2015-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H
+#define _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H
+
+#define TEGRA186_POWER_DOMAIN_AUD 0
+#define TEGRA186_POWER_DOMAIN_DFD 1
+#define TEGRA186_POWER_DOMAIN_DISP 2
+#define TEGRA186_POWER_DOMAIN_DISPB 3
+#define TEGRA186_POWER_DOMAIN_DISPC 4
+#define TEGRA186_POWER_DOMAIN_ISPA 5
+#define TEGRA186_POWER_DOMAIN_NVDEC 6
+#define TEGRA186_POWER_DOMAIN_NVJPG 7
+#define TEGRA186_POWER_DOMAIN_MPE 8
+#define TEGRA186_POWER_DOMAIN_PCX 9
+#define TEGRA186_POWER_DOMAIN_SAX 10
+#define TEGRA186_POWER_DOMAIN_VE 11
+#define TEGRA186_POWER_DOMAIN_VIC 12
+#define TEGRA186_POWER_DOMAIN_XUSBA 13
+#define TEGRA186_POWER_DOMAIN_XUSBB 14
+#define TEGRA186_POWER_DOMAIN_XUSBC 15
+#define TEGRA186_POWER_DOMAIN_GPU 43
+#define TEGRA186_POWER_DOMAIN_MAX 44
+
+#endif
diff --git a/include/dt-bindings/reset/oxsemi,ox810se.h b/include/dt-bindings/reset/oxsemi,ox810se.h
new file mode 100644
index 000000000000..960c26e4504a
--- /dev/null
+++ b/include/dt-bindings/reset/oxsemi,ox810se.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_RESET_OXSEMI_OX810SE_H
+#define DT_RESET_OXSEMI_OX810SE_H
+
+#define RESET_ARM 0
+#define RESET_COPRO 1
+/* Reserved 2 */
+/* Reserved 3 */
+#define RESET_USBHS 4
+#define RESET_USBHSPHY 5
+#define RESET_MAC 6
+#define RESET_PCI 7
+#define RESET_DMA 8
+#define RESET_DPE 9
+#define RESET_DDR 10
+#define RESET_SATA 11
+#define RESET_SATA_LINK 12
+#define RESET_SATA_PHY 13
+ /* Reserved 14 */
+#define RESET_NAND 15
+#define RESET_GPIO 16
+#define RESET_UART1 17
+#define RESET_UART2 18
+#define RESET_MISC 19
+#define RESET_I2S 20
+#define RESET_AHB_MON 21
+#define RESET_UART3 22
+#define RESET_UART4 23
+#define RESET_SGDMA 24
+/* Reserved 25 */
+/* Reserved 26 */
+/* Reserved 27 */
+/* Reserved 28 */
+/* Reserved 29 */
+/* Reserved 30 */
+#define RESET_BUS 31
+
+#endif /* DT_RESET_OXSEMI_OX810SE_H */
diff --git a/include/dt-bindings/reset/oxsemi,ox820.h b/include/dt-bindings/reset/oxsemi,ox820.h
new file mode 100644
index 000000000000..cc6797bf01d8
--- /dev/null
+++ b/include/dt-bindings/reset/oxsemi,ox820.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef DT_RESET_OXSEMI_OX820_H
+#define DT_RESET_OXSEMI_OX820_H
+
+#define RESET_SCU 0
+#define RESET_LEON 1
+#define RESET_ARM0 2
+#define RESET_ARM1 3
+#define RESET_USBHS 4
+#define RESET_USBPHYA 5
+#define RESET_MAC 6
+#define RESET_PCIEA 7
+#define RESET_SGDMA 8
+#define RESET_CIPHER 9
+#define RESET_DDR 10
+#define RESET_SATA 11
+#define RESET_SATA_LINK 12
+#define RESET_SATA_PHY 13
+#define RESET_PCIEPHY 14
+#define RESET_NAND 15
+#define RESET_GPIO 16
+#define RESET_UART1 17
+#define RESET_UART2 18
+#define RESET_MISC 19
+#define RESET_I2S 20
+#define RESET_SD 21
+#define RESET_MAC_2 22
+#define RESET_PCIEB 23
+#define RESET_VIDEO 24
+#define RESET_DDR_PHY 25
+#define RESET_USBPHYB 26
+#define RESET_USBDEV 27
+/* Reserved 29 */
+#define RESET_ARMDBG 29
+#define RESET_PLLA 30
+#define RESET_PLLB 31
+
+#endif /* DT_RESET_OXSEMI_OX820_H */
diff --git a/include/dt-bindings/reset/tegra186-reset.h b/include/dt-bindings/reset/tegra186-reset.h
new file mode 100644
index 000000000000..8a184e357955
--- /dev/null
+++ b/include/dt-bindings/reset/tegra186-reset.h
@@ -0,0 +1,217 @@
+/*
+ * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ABI_MACH_T186_RESET_T186_H_
+#define _ABI_MACH_T186_RESET_T186_H_
+
+
+#define TEGRA186_RESET_ACTMON 0
+#define TEGRA186_RESET_AFI 1
+#define TEGRA186_RESET_CEC 2
+#define TEGRA186_RESET_CSITE 3
+#define TEGRA186_RESET_DP2 4
+#define TEGRA186_RESET_DPAUX 5
+#define TEGRA186_RESET_DSI 6
+#define TEGRA186_RESET_DSIB 7
+#define TEGRA186_RESET_DTV 8
+#define TEGRA186_RESET_DVFS 9
+#define TEGRA186_RESET_ENTROPY 10
+#define TEGRA186_RESET_EXTPERIPH1 11
+#define TEGRA186_RESET_EXTPERIPH2 12
+#define TEGRA186_RESET_EXTPERIPH3 13
+#define TEGRA186_RESET_GPU 14
+#define TEGRA186_RESET_HDA 15
+#define TEGRA186_RESET_HDA2CODEC_2X 16
+#define TEGRA186_RESET_HDA2HDMICODEC 17
+#define TEGRA186_RESET_HOST1X 18
+#define TEGRA186_RESET_I2C1 19
+#define TEGRA186_RESET_I2C2 20
+#define TEGRA186_RESET_I2C3 21
+#define TEGRA186_RESET_I2C4 22
+#define TEGRA186_RESET_I2C5 23
+#define TEGRA186_RESET_I2C6 24
+#define TEGRA186_RESET_ISP 25
+#define TEGRA186_RESET_KFUSE 26
+#define TEGRA186_RESET_LA 27
+#define TEGRA186_RESET_MIPI_CAL 28
+#define TEGRA186_RESET_PCIE 29
+#define TEGRA186_RESET_PCIEXCLK 30
+#define TEGRA186_RESET_SATA 31
+#define TEGRA186_RESET_SATACOLD 32
+#define TEGRA186_RESET_SDMMC1 33
+#define TEGRA186_RESET_SDMMC2 34
+#define TEGRA186_RESET_SDMMC3 35
+#define TEGRA186_RESET_SDMMC4 36
+#define TEGRA186_RESET_SE 37
+#define TEGRA186_RESET_SOC_THERM 38
+#define TEGRA186_RESET_SOR0 39
+#define TEGRA186_RESET_SPI1 40
+#define TEGRA186_RESET_SPI2 41
+#define TEGRA186_RESET_SPI3 42
+#define TEGRA186_RESET_SPI4 43
+#define TEGRA186_RESET_TMR 44
+#define TEGRA186_RESET_TRIG_SYS 45
+#define TEGRA186_RESET_TSEC 46
+#define TEGRA186_RESET_UARTA 47
+#define TEGRA186_RESET_UARTB 48
+#define TEGRA186_RESET_UARTC 49
+#define TEGRA186_RESET_UARTD 50
+#define TEGRA186_RESET_VI 51
+#define TEGRA186_RESET_VIC 52
+#define TEGRA186_RESET_XUSB_DEV 53
+#define TEGRA186_RESET_XUSB_HOST 54
+#define TEGRA186_RESET_XUSB_PADCTL 55
+#define TEGRA186_RESET_XUSB_SS 56
+#define TEGRA186_RESET_AON_APB 57
+#define TEGRA186_RESET_AXI_CBB 58
+#define TEGRA186_RESET_BPMP_APB 59
+#define TEGRA186_RESET_CAN1 60
+#define TEGRA186_RESET_CAN2 61
+#define TEGRA186_RESET_DMIC5 62
+#define TEGRA186_RESET_DSIC 63
+#define TEGRA186_RESET_DSID 64
+#define TEGRA186_RESET_EMC_EMC 65
+#define TEGRA186_RESET_EMC_MEM 66
+#define TEGRA186_RESET_EMCSB_EMC 67
+#define TEGRA186_RESET_EMCSB_MEM 68
+#define TEGRA186_RESET_EQOS 69
+#define TEGRA186_RESET_GPCDMA 70
+#define TEGRA186_RESET_GPIO_CTL0 71
+#define TEGRA186_RESET_GPIO_CTL1 72
+#define TEGRA186_RESET_GPIO_CTL2 73
+#define TEGRA186_RESET_GPIO_CTL3 74
+#define TEGRA186_RESET_GPIO_CTL4 75
+#define TEGRA186_RESET_GPIO_CTL5 76
+#define TEGRA186_RESET_I2C10 77
+#define TEGRA186_RESET_I2C12 78
+#define TEGRA186_RESET_I2C13 79
+#define TEGRA186_RESET_I2C14 80
+#define TEGRA186_RESET_I2C7 81
+#define TEGRA186_RESET_I2C8 82
+#define TEGRA186_RESET_I2C9 83
+#define TEGRA186_RESET_JTAG2AXI 84
+#define TEGRA186_RESET_MPHY_IOBIST 85
+#define TEGRA186_RESET_MPHY_L0_RX 86
+#define TEGRA186_RESET_MPHY_L0_TX 87
+#define TEGRA186_RESET_NVCSI 88
+#define TEGRA186_RESET_NVDISPLAY0_HEAD0 89
+#define TEGRA186_RESET_NVDISPLAY0_HEAD1 90
+#define TEGRA186_RESET_NVDISPLAY0_HEAD2 91
+#define TEGRA186_RESET_NVDISPLAY0_MISC 92
+#define TEGRA186_RESET_NVDISPLAY0_WGRP0 93
+#define TEGRA186_RESET_NVDISPLAY0_WGRP1 94
+#define TEGRA186_RESET_NVDISPLAY0_WGRP2 95
+#define TEGRA186_RESET_NVDISPLAY0_WGRP3 96
+#define TEGRA186_RESET_NVDISPLAY0_WGRP4 97
+#define TEGRA186_RESET_NVDISPLAY0_WGRP5 98
+#define TEGRA186_RESET_PWM1 99
+#define TEGRA186_RESET_PWM2 100
+#define TEGRA186_RESET_PWM3 101
+#define TEGRA186_RESET_PWM4 102
+#define TEGRA186_RESET_PWM5 103
+#define TEGRA186_RESET_PWM6 104
+#define TEGRA186_RESET_PWM7 105
+#define TEGRA186_RESET_PWM8 106
+#define TEGRA186_RESET_SCE_APB 107
+#define TEGRA186_RESET_SOR1 108
+#define TEGRA186_RESET_TACH 109
+#define TEGRA186_RESET_TSC 110
+#define TEGRA186_RESET_UARTF 111
+#define TEGRA186_RESET_UARTG 112
+#define TEGRA186_RESET_UFSHC 113
+#define TEGRA186_RESET_UFSHC_AXI_M 114
+#define TEGRA186_RESET_UPHY 115
+#define TEGRA186_RESET_ADSP 116
+#define TEGRA186_RESET_ADSPDBG 117
+#define TEGRA186_RESET_ADSPINTF 118
+#define TEGRA186_RESET_ADSPNEON 119
+#define TEGRA186_RESET_ADSPPERIPH 120
+#define TEGRA186_RESET_ADSPSCU 121
+#define TEGRA186_RESET_ADSPWDT 122
+#define TEGRA186_RESET_APE 123
+#define TEGRA186_RESET_DPAUX1 124
+#define TEGRA186_RESET_NVDEC 125
+#define TEGRA186_RESET_NVENC 126
+#define TEGRA186_RESET_NVJPG 127
+#define TEGRA186_RESET_PEX_USB_UPHY 128
+#define TEGRA186_RESET_QSPI 129
+#define TEGRA186_RESET_TSECB 130
+#define TEGRA186_RESET_VI_I2C 131
+#define TEGRA186_RESET_UARTE 132
+#define TEGRA186_RESET_TOP_GTE 133
+#define TEGRA186_RESET_SHSP 134
+#define TEGRA186_RESET_PEX_USB_UPHY_L5 135
+#define TEGRA186_RESET_PEX_USB_UPHY_L4 136
+#define TEGRA186_RESET_PEX_USB_UPHY_L3 137
+#define TEGRA186_RESET_PEX_USB_UPHY_L2 138
+#define TEGRA186_RESET_PEX_USB_UPHY_L1 139
+#define TEGRA186_RESET_PEX_USB_UPHY_L0 140
+#define TEGRA186_RESET_PEX_USB_UPHY_PLL1 141
+#define TEGRA186_RESET_PEX_USB_UPHY_PLL0 142
+#define TEGRA186_RESET_TSCTNVI 143
+#define TEGRA186_RESET_EXTPERIPH4 144
+#define TEGRA186_RESET_DSIPADCTL 145
+#define TEGRA186_RESET_AUD_MCLK 146
+#define TEGRA186_RESET_MPHY_CLK_CTL 147
+#define TEGRA186_RESET_MPHY_L1_RX 148
+#define TEGRA186_RESET_MPHY_L1_TX 149
+#define TEGRA186_RESET_UFSHC_LP 150
+#define TEGRA186_RESET_BPMP_NIC 151
+#define TEGRA186_RESET_BPMP_NSYSPORESET 152
+#define TEGRA186_RESET_BPMP_NRESET 153
+#define TEGRA186_RESET_BPMP_DBGRESETN 154
+#define TEGRA186_RESET_BPMP_PRESETDBGN 155
+#define TEGRA186_RESET_BPMP_PM 156
+#define TEGRA186_RESET_BPMP_CVC 157
+#define TEGRA186_RESET_BPMP_DMA 158
+#define TEGRA186_RESET_BPMP_HSP 159
+#define TEGRA186_RESET_TSCTNBPMP 160
+#define TEGRA186_RESET_BPMP_TKE 161
+#define TEGRA186_RESET_BPMP_GTE 162
+#define TEGRA186_RESET_BPMP_PM_ACTMON 163
+#define TEGRA186_RESET_AON_NIC 164
+#define TEGRA186_RESET_AON_NSYSPORESET 165
+#define TEGRA186_RESET_AON_NRESET 166
+#define TEGRA186_RESET_AON_DBGRESETN 167
+#define TEGRA186_RESET_AON_PRESETDBGN 168
+#define TEGRA186_RESET_AON_ACTMON 169
+#define TEGRA186_RESET_AOPM 170
+#define TEGRA186_RESET_AOVC 171
+#define TEGRA186_RESET_AON_DMA 172
+#define TEGRA186_RESET_AON_GPIO 173
+#define TEGRA186_RESET_AON_HSP 174
+#define TEGRA186_RESET_TSCTNAON 175
+#define TEGRA186_RESET_AON_TKE 176
+#define TEGRA186_RESET_AON_GTE 177
+#define TEGRA186_RESET_SCE_NIC 178
+#define TEGRA186_RESET_SCE_NSYSPORESET 179
+#define TEGRA186_RESET_SCE_NRESET 180
+#define TEGRA186_RESET_SCE_DBGRESETN 181
+#define TEGRA186_RESET_SCE_PRESETDBGN 182
+#define TEGRA186_RESET_SCE_ACTMON 183
+#define TEGRA186_RESET_SCE_PM 184
+#define TEGRA186_RESET_SCE_DMA 185
+#define TEGRA186_RESET_SCE_HSP 186
+#define TEGRA186_RESET_TSCTNSCE 187
+#define TEGRA186_RESET_SCE_TKE 188
+#define TEGRA186_RESET_SCE_GTE 189
+#define TEGRA186_RESET_SCE_CFG 190
+#define TEGRA186_RESET_ADSP_ALL 191
+/** @brief controls the power up/down sequence of UFSHC PSW partition. Controls LP_PWR_READY, LP_ISOL_EN, and LP_RESET_N signals */
+#define TEGRA186_RESET_UFSHC_LP_SEQ 192
+#define TEGRA186_RESET_SIZE 193
+
+#endif
diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h
index a37bc5538f19..eab64976a73b 100644
--- a/include/linux/soc/qcom/wcnss_ctrl.h
+++ b/include/linux/soc/qcom/wcnss_ctrl.h
@@ -3,6 +3,19 @@
#include <linux/soc/qcom/smd.h>
+#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL)
+
struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb);
+#else
+
+static inline struct qcom_smd_channel*
+qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb)
+{
+ WARN_ON(1);
+ return ERR_PTR(-ENXIO);
+}
+
+#endif
+
#endif
diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h
new file mode 100644
index 000000000000..0ccbc138c26a
--- /dev/null
+++ b/include/linux/soc/ti/ti_sci_protocol.h
@@ -0,0 +1,249 @@
+/*
+ * Texas Instruments System Control Interface Protocol
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __TISCI_PROTOCOL_H
+#define __TISCI_PROTOCOL_H
+
+/**
+ * struct ti_sci_version_info - version information structure
+ * @abi_major: Major ABI version. Change here implies risk of backward
+ * compatibility break.
+ * @abi_minor: Minor ABI version. Change here implies new feature addition,
+ * or compatible change in ABI.
+ * @firmware_revision: Firmware revision (not usually used).
+ * @firmware_description: Firmware description (not usually used).
+ */
+struct ti_sci_version_info {
+ u8 abi_major;
+ u8 abi_minor;
+ u16 firmware_revision;
+ char firmware_description[32];
+};
+
+struct ti_sci_handle;
+
+/**
+ * struct ti_sci_core_ops - SoC Core Operations
+ * @reboot_device: Reboot the SoC
+ * Returns 0 for successful request(ideally should never return),
+ * else returns corresponding error value.
+ */
+struct ti_sci_core_ops {
+ int (*reboot_device)(const struct ti_sci_handle *handle);
+};
+
+/**
+ * struct ti_sci_dev_ops - Device control operations
+ * @get_device: Command to request for device managed by TISCI
+ * Returns 0 for successful exclusive request, else returns
+ * corresponding error message.
+ * @idle_device: Command to idle a device managed by TISCI
+ * Returns 0 for successful exclusive request, else returns
+ * corresponding error message.
+ * @put_device: Command to release a device managed by TISCI
+ * Returns 0 for successful release, else returns corresponding
+ * error message.
+ * @is_valid: Check if the device ID is a valid ID.
+ * Returns 0 if the ID is valid, else returns corresponding error.
+ * @get_context_loss_count: Command to retrieve context loss counter - this
+ * increments every time the device looses context. Overflow
+ * is possible.
+ * - count: pointer to u32 which will retrieve counter
+ * Returns 0 for successful information request and count has
+ * proper data, else returns corresponding error message.
+ * @is_idle: Reports back about device idle state
+ * - req_state: Returns requested idle state
+ * Returns 0 for successful information request and req_state and
+ * current_state has proper data, else returns corresponding error
+ * message.
+ * @is_stop: Reports back about device stop state
+ * - req_state: Returns requested stop state
+ * - current_state: Returns current stop state
+ * Returns 0 for successful information request and req_state and
+ * current_state has proper data, else returns corresponding error
+ * message.
+ * @is_on: Reports back about device ON(or active) state
+ * - req_state: Returns requested ON state
+ * - current_state: Returns current ON state
+ * Returns 0 for successful information request and req_state and
+ * current_state has proper data, else returns corresponding error
+ * message.
+ * @is_transitioning: Reports back if the device is in the middle of transition
+ * of state.
+ * -current_state: Returns 'true' if currently transitioning.
+ * @set_device_resets: Command to configure resets for device managed by TISCI.
+ * -reset_state: Device specific reset bit field
+ * Returns 0 for successful request, else returns
+ * corresponding error message.
+ * @get_device_resets: Command to read state of resets for device managed
+ * by TISCI.
+ * -reset_state: pointer to u32 which will retrieve resets
+ * Returns 0 for successful request, else returns
+ * corresponding error message.
+ *
+ * NOTE: for all these functions, the following parameters are generic in
+ * nature:
+ * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * -id: Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ */
+struct ti_sci_dev_ops {
+ int (*get_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*put_device)(const struct ti_sci_handle *handle, u32 id);
+ int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
+ int (*get_context_loss_count)(const struct ti_sci_handle *handle,
+ u32 id, u32 *count);
+ int (*is_idle)(const struct ti_sci_handle *handle, u32 id,
+ bool *requested_state);
+ int (*is_stop)(const struct ti_sci_handle *handle, u32 id,
+ bool *req_state, bool *current_state);
+ int (*is_on)(const struct ti_sci_handle *handle, u32 id,
+ bool *req_state, bool *current_state);
+ int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id,
+ bool *current_state);
+ int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id,
+ u32 reset_state);
+ int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id,
+ u32 *reset_state);
+};
+
+/**
+ * struct ti_sci_clk_ops - Clock control operations
+ * @get_clock: Request for activation of clock and manage by processor
+ * - needs_ssc: 'true' if Spread Spectrum clock is desired.
+ * - can_change_freq: 'true' if frequency change is desired.
+ * - enable_input_term: 'true' if input termination is desired.
+ * @idle_clock: Request for Idling a clock managed by processor
+ * @put_clock: Release the clock to be auto managed by TISCI
+ * @is_auto: Is the clock being auto managed
+ * - req_state: state indicating if the clock is auto managed
+ * @is_on: Is the clock ON
+ * - req_state: if the clock is requested to be forced ON
+ * - current_state: if the clock is currently ON
+ * @is_off: Is the clock OFF
+ * - req_state: if the clock is requested to be forced OFF
+ * - current_state: if the clock is currently Gated
+ * @set_parent: Set the clock source of a specific device clock
+ * - parent_id: Parent clock identifier to set.
+ * @get_parent: Get the current clock source of a specific device clock
+ * - parent_id: Parent clock identifier which is the parent.
+ * @get_num_parents: Get the number of parents of the current clock source
+ * - num_parents: returns the number of parent clocks.
+ * @get_best_match_freq: Find a best matching frequency for a frequency
+ * range.
+ * - match_freq: Best matching frequency in Hz.
+ * @set_freq: Set the Clock frequency
+ * @get_freq: Get the Clock frequency
+ * - current_freq: Frequency in Hz that the clock is at.
+ *
+ * NOTE: for all these functions, the following parameters are generic in
+ * nature:
+ * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle
+ * -did: Device identifier this request is for
+ * -cid: Clock identifier for the device for this request.
+ * Each device has it's own set of clock inputs. This indexes
+ * which clock input to modify.
+ * -min_freq: The minimum allowable frequency in Hz. This is the minimum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ * -target_freq: The target clock frequency in Hz. A frequency will be
+ * processed as close to this target frequency as possible.
+ * -max_freq: The maximum allowable frequency in Hz. This is the maximum
+ * allowable programmed frequency and does not account for clock
+ * tolerances and jitter.
+ *
+ * Request for the clock - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_clock with put_clock. No refcounting is
+ * managed by driver for that purpose.
+ */
+struct ti_sci_clk_ops {
+ int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool needs_ssc, bool can_change_freq,
+ bool enable_input_term);
+ int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
+ int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid);
+ int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state);
+ int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state, bool *current_state);
+ int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ bool *req_state, bool *current_state);
+ int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u8 parent_id);
+ int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u8 *parent_id);
+ int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did,
+ u8 cid, u8 *num_parents);
+ int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did,
+ u8 cid, u64 min_freq, u64 target_freq,
+ u64 max_freq, u64 *match_freq);
+ int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u64 min_freq, u64 target_freq, u64 max_freq);
+ int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid,
+ u64 *current_freq);
+};
+
+/**
+ * struct ti_sci_ops - Function support for TI SCI
+ * @dev_ops: Device specific operations
+ * @clk_ops: Clock specific operations
+ */
+struct ti_sci_ops {
+ struct ti_sci_core_ops core_ops;
+ struct ti_sci_dev_ops dev_ops;
+ struct ti_sci_clk_ops clk_ops;
+};
+
+/**
+ * struct ti_sci_handle - Handle returned to TI SCI clients for usage.
+ * @version: structure containing version information
+ * @ops: operations that are made available to TI SCI clients
+ */
+struct ti_sci_handle {
+ struct ti_sci_version_info version;
+ struct ti_sci_ops ops;
+};
+
+#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
+const struct ti_sci_handle *ti_sci_get_handle(struct device *dev);
+int ti_sci_put_handle(const struct ti_sci_handle *handle);
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev);
+
+#else /* CONFIG_TI_SCI_PROTOCOL */
+
+static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+static inline int ti_sci_put_handle(const struct ti_sci_handle *handle)
+{
+ return -EINVAL;
+}
+
+static inline
+const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+#endif /* CONFIG_TI_SCI_PROTOCOL */
+
+#endif /* __TISCI_PROTOCOL_H */
diff --git a/include/soc/at91/atmel-secumod.h b/include/soc/at91/atmel-secumod.h
new file mode 100644
index 000000000000..22cd5d506926
--- /dev/null
+++ b/include/soc/at91/atmel-secumod.h
@@ -0,0 +1,19 @@
+/*
+ * Atmel Security Module register offsets and bit definitions.
+ *
+ * Copyright (C) 2016 Atmel
+ *
+ * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _LINUX_SOC_AT91_ATMEL_SECUMOD_H
+#define _LINUX_SOC_AT91_ATMEL_SECUMOD_H
+
+#define AT91_SECUMOD_RAMRDY 0x14
+#define AT91_SECUMOD_RAMRDY_READY BIT(0)
+
+#endif /* _LINUX_SOC_AT91_ATMEL_SECUMOD_H */
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h
new file mode 100644
index 000000000000..0aaef5960e29
--- /dev/null
+++ b/include/soc/tegra/bpmp-abi.h
@@ -0,0 +1,1601 @@
+/*
+ * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ABI_BPMP_ABI_H_
+#define _ABI_BPMP_ABI_H_
+
+#ifdef LK
+#include <stdint.h>
+#endif
+
+#ifndef __ABI_PACKED
+#define __ABI_PACKED __attribute__((packed))
+#endif
+
+#ifdef NO_GCC_EXTENSIONS
+#define EMPTY char empty;
+#define EMPTY_ARRAY 1
+#else
+#define EMPTY
+#define EMPTY_ARRAY 0
+#endif
+
+#ifndef __UNION_ANON
+#define __UNION_ANON
+#endif
+/**
+ * @file
+ */
+
+
+/**
+ * @defgroup MRQ MRQ Messages
+ * @brief Messages sent to/from BPMP via IPC
+ * @{
+ * @defgroup MRQ_Format Message Format
+ * @defgroup MRQ_Codes Message Request (MRQ) Codes
+ * @defgroup MRQ_Payloads Message Payloads
+ * @defgroup Error_Codes Error Codes
+ * @}
+ */
+
+/**
+ * @addtogroup MRQ_Format Message Format
+ * @{
+ * The CPU requests the BPMP to perform a particular service by
+ * sending it an IVC frame containing a single MRQ message. An MRQ
+ * message consists of a @ref mrq_request followed by a payload whose
+ * format depends on mrq_request::mrq.
+ *
+ * The BPMP processes the data and replies with an IVC frame (on the
+ * same IVC channel) containing and MRQ response. An MRQ response
+ * consists of a @ref mrq_response followed by a payload whose format
+ * depends on the associated mrq_request::mrq.
+ *
+ * A well-defined subset of the MRQ messages that the CPU sends to the
+ * BPMP can lead to BPMP eventually sending an MRQ message to the
+ * CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
+ * a thermal trip point, the BPMP may eventually send a single
+ * #MRQ_THERMAL message of its own to the CPU indicating that the trip
+ * point has been crossed.
+ * @}
+ */
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ message
+ *
+ * Provides the MRQ number for the MRQ message: #mrq. The remainder of
+ * the MRQ message is a payload (immediately following the
+ * mrq_request) whose format depends on mrq.
+ *
+ * @todo document the flags
+ */
+struct mrq_request {
+ /** @brief MRQ number of the request */
+ uint32_t mrq;
+ /** @brief flags for the request */
+ uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * @brief header for an MRQ response
+ *
+ * Provides an error code for the associated MRQ message. The
+ * remainder of the MRQ response is a payload (immediately following
+ * the mrq_response) whose format depends on the associated
+ * mrq_request::mrq
+ *
+ * @todo document the flags
+ */
+struct mrq_response {
+ /** @brief error code for the MRQ request itself */
+ int32_t err;
+ /** @brief flags for the response */
+ uint32_t flags;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Format
+ * Minimum needed size for an IPC message buffer
+ */
+#define MSG_MIN_SZ 128
+/**
+ * @ingroup MRQ_Format
+ * Minimum size guaranteed for data in an IPC message buffer
+ */
+#define MSG_DATA_MIN_SZ 120
+
+/**
+ * @ingroup MRQ_Codes
+ * @name Legal MRQ codes
+ * These are the legal values for mrq_request::mrq
+ * @{
+ */
+
+#define MRQ_PING 0
+#define MRQ_QUERY_TAG 1
+#define MRQ_MODULE_LOAD 4
+#define MRQ_MODULE_UNLOAD 5
+#define MRQ_TRACE_MODIFY 7
+#define MRQ_WRITE_TRACE 8
+#define MRQ_THREADED_PING 9
+#define MRQ_MODULE_MAIL 11
+#define MRQ_DEBUGFS 19
+#define MRQ_RESET 20
+#define MRQ_I2C 21
+#define MRQ_CLK 22
+#define MRQ_QUERY_ABI 23
+#define MRQ_PG_READ_STATE 25
+#define MRQ_PG_UPDATE_STATE 26
+#define MRQ_THERMAL 27
+#define MRQ_CPU_VHINT 28
+#define MRQ_ABI_RATCHET 29
+#define MRQ_EMC_DVFS_LATENCY 31
+#define MRQ_TRACE_ITER 64
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @brief Maximum MRQ code to be sent by CPU software to
+ * BPMP. Subject to change in future
+ */
+#define MAX_CPU_MRQ_ID 64
+
+/**
+ * @addtogroup MRQ_Payloads Message Payloads
+ * @{
+ * @defgroup Ping
+ * @defgroup Query_Tag Query Tag
+ * @defgroup Module Loadable Modules
+ * @defgroup Trace
+ * @defgroup Debugfs
+ * @defgroup Reset
+ * @defgroup I2C
+ * @defgroup Clocks
+ * @defgroup ABI_info ABI Info
+ * @defgroup MC_Flush MC Flush
+ * @defgroup Powergating
+ * @defgroup Thermal
+ * @defgroup Vhint CPU Voltage hint
+ * @defgroup MRQ_Deprecated Deprecated MRQ messages
+ * @defgroup EMC
+ * @}
+ */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PING
+ * @brief A simple ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * @ingroup MRQ_Codes
+ * @def MRQ_THREADED_PING
+ * @brief A deeper ping
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_ping_request
+ * * Response Payload: @ref mrq_ping_response
+ *
+ * Behavior is equivalent to a simple #MRQ_PING except that BPMP
+ * responds from a thread context (providing a slightly more robust
+ * sign of life).
+ *
+ */
+
+/**
+ * @ingroup Ping
+ * @brief request with #MRQ_PING
+ *
+ * Used by the sender of an #MRQ_PING message to request a pong from
+ * recipient. The response from the recipient is computed based on
+ * #challenge.
+ */
+struct mrq_ping_request {
+/** @brief arbitrarily chosen value */
+ uint32_t challenge;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Ping
+ * @brief response to #MRQ_PING
+ *
+ * Sent in response to an #MRQ_PING message. #reply should be the
+ * mrq_ping_request challenge left shifted by 1 with the carry-bit
+ * dropped.
+ *
+ */
+struct mrq_ping_response {
+ /** @brief response to the MRQ_PING challege */
+ uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_TAG
+ * @brief Query BPMP firmware's tag (i.e. version information)
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_query_tag_request
+ * * Response Payload: N/A
+ *
+ */
+
+/**
+ * @ingroup Query_Tag
+ * @brief request with #MRQ_QUERY_TAG
+ *
+ * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory
+ * pointed by #addr with BPMP firmware header.
+ *
+ * The sender is reponsible for ensuring that #addr is mapped in to
+ * the recipient's address map.
+ */
+struct mrq_query_tag_request {
+ /** @brief base address to store the firmware header */
+ uint32_t addr;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_LOAD
+ * @brief dynamically load a BPMP code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_load_request
+ * * Response Payload: @ref mrq_module_load_response
+ *
+ * @note This MRQ is disabled on production systems
+ *
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_LOAD
+ *
+ * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically
+ * load the code located at #phys_addr and having size #size
+ * bytes. #phys_addr is treated as a void pointer.
+ *
+ * The recipient copies the code from #phys_addr to locally allocated
+ * memory prior to responding to this message.
+ *
+ * @todo document the module header format
+ *
+ * The sender is responsible for ensuring that the code is mapped in
+ * the recipient's address map.
+ *
+ */
+struct mrq_module_load_request {
+ /** @brief base address of the code to load. Treated as (void *) */
+ uint32_t phys_addr; /* (void *) */
+ /** @brief size in bytes of code to load */
+ uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_LOAD
+ *
+ * @todo document mrq_response::err
+ */
+struct mrq_module_load_response {
+ /** @brief handle to the loaded module */
+ uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_UNLOAD
+ * @brief unload a previously loaded code module
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_unload_request
+ * * Response Payload: N/A
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_UNLOAD
+ *
+ * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded
+ * module be unloaded.
+ */
+struct mrq_module_unload_request {
+ /** @brief handle of the module to unload */
+ uint32_t base;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_MODIFY
+ * @brief modify the set of enabled trace events
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_trace_modify_request
+ * * Response Payload: @ref mrq_trace_modify_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_TRACE_MODIFY
+ *
+ * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace
+ * events. #set takes precedence for any bit set in both #set and
+ * #clr.
+ */
+struct mrq_trace_modify_request {
+ /** @brief bit mask of trace events to disable */
+ uint32_t clr;
+ /** @brief bit mask of trace events to enable */
+ uint32_t set;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_TRACE_MODIFY
+ *
+ * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the
+ * state of which events are enabled after the recipient acted on the
+ * message.
+ *
+ */
+struct mrq_trace_modify_response {
+ /** @brief bit mask of trace event enable states */
+ uint32_t mask;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_WRITE_TRACE
+ * @brief Write trace data to a buffer
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_write_trace_request
+ * * Response Payload: @ref mrq_write_trace_response
+ *
+ * mrq_response::err depends on the @ref mrq_write_trace_request field
+ * values. err is -#BPMP_EINVAL if size is zero or area is NULL or
+ * area is in an illegal range. A positive value for err indicates the
+ * number of bytes written to area.
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Trace
+ * @brief request with #MRQ_WRITE_TRACE
+ *
+ * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace
+ * data from the recipient's local buffer to the output buffer. #area
+ * is treated as a byte-aligned pointer in the recipient's address
+ * space.
+ *
+ * The sender is responsible for ensuring that the output
+ * buffer is mapped in the recipient's address map. The recipient is
+ * responsible for protecting its own code and data from accidental
+ * overwrites.
+ */
+struct mrq_write_trace_request {
+ /** @brief base address of output buffer */
+ uint32_t area;
+ /** @brief size in bytes of the output buffer */
+ uint32_t size;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Trace
+ * @brief response to #MRQ_WRITE_TRACE
+ *
+ * Once this response is sent, the respondent will not access the
+ * output buffer further.
+ */
+struct mrq_write_trace_response {
+ /**
+ * @brief flag whether more data remains in local buffer
+ *
+ * Value is 1 if the entire local trace buffer has been
+ * drained to the outputbuffer. Value is 0 otherwise.
+ */
+ uint32_t eof;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_request {
+ uint32_t challenge;
+} __ABI_PACKED;
+
+/** @private */
+struct mrq_threaded_ping_response {
+ uint32_t reply;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_MAIL
+ * @brief send a message to a loadable module
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_module_mail_request
+ * * Response Payload: @ref mrq_module_mail_response
+ *
+ * @note This MRQ is disabled on production systems
+ */
+
+/**
+ * @ingroup Module
+ * @brief request with #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_request {
+ /** @brief handle to the previously loaded module */
+ uint32_t base;
+ /** @brief module-specific mail payload
+ *
+ * The length of data[ ] is unknown to the BPMP core firmware
+ * but it is limited to the size of an IPC message.
+ */
+ uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup Module
+ * @brief response to #MRQ_MODULE_MAIL
+ */
+struct mrq_module_mail_response {
+ /** @brief module-specific mail payload
+ *
+ * The length of data[ ] is unknown to the BPMP core firmware
+ * but it is limited to the size of an IPC message.
+ */
+ uint8_t data[EMPTY_ARRAY];
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_DEBUGFS
+ * @brief Interact with BPMP's debugfs file nodes
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_debugfs_request
+ * * Response Payload: @ref mrq_debugfs_response
+ */
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ *
+ * The BPMP firmware implements a pseudo-filesystem called
+ * debugfs. Any driver within the firmware may register with debugfs
+ * to expose an arbitrary set of "files" in the filesystem. When
+ * software on the CPU writes to a debugfs file, debugfs passes the
+ * written data to a callback provided by the driver. When software on
+ * the CPU reads a debugfs file, debugfs queries the driver for the
+ * data to return to the CPU. The intention of the debugfs filesystem
+ * is to provide information useful for debugging the system at
+ * runtime.
+ *
+ * @note The files exposed via debugfs are not part of the
+ * BPMP firmware's ABI. debugfs files may be added or removed in any
+ * given version of the firmware. Typically the semantics of a debugfs
+ * file are consistent from version to version but even that is not
+ * guaranteed.
+ *
+ * @}
+ */
+/** @ingroup Debugfs */
+enum mrq_debugfs_commands {
+ CMD_DEBUGFS_READ = 1,
+ CMD_DEBUGFS_WRITE = 2,
+ CMD_DEBUGFS_DUMPDIR = 3,
+ CMD_DEBUGFS_MAX
+};
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_request {
+ /** @brief physical address pointing at filename */
+ uint32_t fnameaddr;
+ /** @brief length in bytes of filename buffer */
+ uint32_t fnamelen;
+ /** @brief physical address pointing to data buffer */
+ uint32_t dataaddr;
+ /** @brief length in bytes of data buffer */
+ uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_dumpdir_request {
+ /** @brief physical address pointing to data buffer */
+ uint32_t dataaddr;
+ /** @brief length in bytes of data buffer */
+ uint32_t datalen;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_READ/WRITE command
+ */
+struct cmd_debugfs_fileop_response {
+ /** @brief always 0 */
+ uint32_t reserved;
+ /** @brief number of bytes read from or written to data buffer */
+ uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief response data for CMD_DEBUGFS_DUMPDIR command
+ */
+struct cmd_debugfs_dumpdir_response {
+ /** @brief always 0 */
+ uint32_t reserved;
+ /** @brief number of bytes read from or written to data buffer */
+ uint32_t nbytes;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ * @brief request with #MRQ_DEBUGFS.
+ *
+ * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
+ * command to execute. Legal commands are the values of @ref
+ * mrq_debugfs_commands. Each command requires a specific additional
+ * payload of data.
+ *
+ * |command |payload|
+ * |-------------------|-------|
+ * |CMD_DEBUGFS_READ |fop |
+ * |CMD_DEBUGFS_WRITE |fop |
+ * |CMD_DEBUGFS_DUMPDIR|dumpdir|
+ */
+struct mrq_debugfs_request {
+ uint32_t cmd;
+ union {
+ struct cmd_debugfs_fileop_request fop;
+ struct cmd_debugfs_dumpdir_request dumpdir;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Debugfs
+ */
+struct mrq_debugfs_response {
+ /** @brief always 0 */
+ int32_t reserved;
+ union {
+ /** @brief response data for CMD_DEBUGFS_READ OR
+ * CMD_DEBUGFS_WRITE command
+ */
+ struct cmd_debugfs_fileop_response fop;
+ /** @brief response data for CMD_DEBUGFS_DUMPDIR command */
+ struct cmd_debugfs_dumpdir_response dumpdir;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @addtogroup Debugfs
+ * @{
+ */
+#define DEBUGFS_S_ISDIR (1 << 9)
+#define DEBUGFS_S_IRUSR (1 << 8)
+#define DEBUGFS_S_IWUSR (1 << 7)
+/** @} */
+
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_RESET
+ * @brief reset an IP block
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_reset_request
+ * * Response Payload: N/A
+ */
+
+/**
+ * @ingroup Reset
+ */
+enum mrq_reset_commands {
+ CMD_RESET_ASSERT = 1,
+ CMD_RESET_DEASSERT = 2,
+ CMD_RESET_MODULE = 3,
+ CMD_RESET_MAX, /* not part of ABI and subject to change */
+};
+
+/**
+ * @ingroup Reset
+ * @brief request with MRQ_RESET
+ *
+ * Used by the sender of an #MRQ_RESET message to request BPMP to
+ * assert or or deassert a given reset line.
+ */
+struct mrq_reset_request {
+ /** @brief reset action to perform (@enum mrq_reset_commands) */
+ uint32_t cmd;
+ /** @brief id of the reset to affected */
+ uint32_t reset_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_I2C
+ * @brief issue an i2c transaction
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_i2c_request
+ * * Response Payload: @ref mrq_i2c_response
+ */
+
+/**
+ * @addtogroup I2C
+ * @{
+ */
+#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12)
+#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4)
+/** @} */
+
+/**
+ * @ingroup I2C
+ * @name Serial I2C flags
+ * Use these flags with serial_i2c_request::flags
+ * @{
+ */
+#define SERIALI2C_TEN 0x0010
+#define SERIALI2C_RD 0x0001
+#define SERIALI2C_STOP 0x8000
+#define SERIALI2C_NOSTART 0x4000
+#define SERIALI2C_REV_DIR_ADDR 0x2000
+#define SERIALI2C_IGNORE_NAK 0x1000
+#define SERIALI2C_NO_RD_ACK 0x0800
+#define SERIALI2C_RECV_LEN 0x0400
+/** @} */
+/** @ingroup I2C */
+enum {
+ CMD_I2C_XFER = 1
+};
+
+/**
+ * @ingroup I2C
+ * @brief serializable i2c request
+ *
+ * Instances of this structure are packed (little-endian) into
+ * cmd_i2c_xfer_request::data_buf. Each instance represents a single
+ * transaction (or a portion of a transaction with repeated starts) on
+ * an i2c bus.
+ *
+ * Because these structures are packed, some instances are likely to
+ * be misaligned. Additionally because #data is variable length, it is
+ * not possible to iterate through a serialized list of these
+ * structures without inspecting #len in each instance. It may be
+ * easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
+ * manually rather than using this structure definition.
+*/
+struct serial_i2c_request {
+ /** @brief I2C slave address */
+ uint16_t addr;
+ /** @brief bitmask of SERIALI2C_ flags */
+ uint16_t flags;
+ /** @brief length of I2C transaction in bytes */
+ uint16_t len;
+ /** @brief for write transactions only, #len bytes of data */
+ uint8_t data[];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief trigger one or more i2c transactions
+ */
+struct cmd_i2c_xfer_request {
+ /** @brief valid bus number from mach-t186/i2c-t186.h*/
+ uint32_t bus_id;
+
+ /** @brief count of valid bytes in #data_buf*/
+ uint32_t data_size;
+
+ /** @brief serialized packed instances of @ref serial_i2c_request*/
+ uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief container for data read from the i2c bus
+ *
+ * Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
+ * zero or more I2C reads. The data read from the bus is serialized
+ * into #data_buf.
+ */
+struct cmd_i2c_xfer_response {
+ /** @brief count of valid bytes in #data_buf*/
+ uint32_t data_size;
+ /** @brief i2c read data */
+ uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief request with #MRQ_I2C
+ */
+struct mrq_i2c_request {
+ /** @brief always CMD_I2C_XFER (i.e. 1) */
+ uint32_t cmd;
+ /** @brief parameters of the transfer request */
+ struct cmd_i2c_xfer_request xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup I2C
+ * @brief response to #MRQ_I2C
+ */
+struct mrq_i2c_response {
+ struct cmd_i2c_xfer_response xfer;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CLK
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_clk_request
+ * * Response Payload: @ref mrq_clk_response
+ * @addtogroup Clocks
+ * @{
+ */
+
+/**
+ * @name MRQ_CLK sub-commands
+ * @{
+ */
+enum {
+ CMD_CLK_GET_RATE = 1,
+ CMD_CLK_SET_RATE = 2,
+ CMD_CLK_ROUND_RATE = 3,
+ CMD_CLK_GET_PARENT = 4,
+ CMD_CLK_SET_PARENT = 5,
+ CMD_CLK_IS_ENABLED = 6,
+ CMD_CLK_ENABLE = 7,
+ CMD_CLK_DISABLE = 8,
+ CMD_CLK_GET_ALL_INFO = 14,
+ CMD_CLK_GET_MAX_CLK_ID = 15,
+ CMD_CLK_MAX,
+};
+/** @} */
+
+#define MRQ_CLK_NAME_MAXLEN 40
+#define MRQ_CLK_MAX_PARENTS 16
+
+/** @private */
+struct cmd_clk_get_rate_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_request {
+ int32_t unused;
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_set_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_request {
+ int32_t unused;
+ int64_t rate;
+} __ABI_PACKED;
+
+struct cmd_clk_round_rate_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_parent_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_parent_response {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_request {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+struct cmd_clk_set_parent_response {
+ uint32_t parent_id;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_is_enabled_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_is_enabled_response {
+ int32_t state;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_request {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_enable_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_request {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_disable_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_all_info_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_all_info_response {
+ uint32_t flags;
+ uint32_t parent;
+ uint32_t parents[MRQ_CLK_MAX_PARENTS];
+ uint8_t num_parents;
+ uint8_t name[MRQ_CLK_NAME_MAXLEN];
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_clk_get_max_clk_id_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_max_clk_id_response {
+ uint32_t max_id;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup Clocks
+ * @brief request with #MRQ_CLK
+ *
+ * Used by the sender of an #MRQ_CLK message to control clocks. The
+ * clk_request is split into several sub-commands. Some sub-commands
+ * require no additional data. Others have a sub-command specific
+ * payload
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |CMD_CLK_GET_RATE |- |
+ * |CMD_CLK_SET_RATE |clk_set_rate |
+ * |CMD_CLK_ROUND_RATE |clk_round_rate |
+ * |CMD_CLK_GET_PARENT |- |
+ * |CMD_CLK_SET_PARENT |clk_set_parent |
+ * |CMD_CLK_IS_ENABLED |- |
+ * |CMD_CLK_ENABLE |- |
+ * |CMD_CLK_DISABLE |- |
+ * |CMD_CLK_GET_ALL_INFO |- |
+ * |CMD_CLK_GET_MAX_CLK_ID |- |
+ *
+ */
+
+struct mrq_clk_request {
+ /** @brief sub-command and clock id concatenated to 32-bit word.
+ * - bits[31..24] is the sub-cmd.
+ * - bits[23..0] is the clock id
+ */
+ uint32_t cmd_and_id;
+
+ union {
+ /** @private */
+ struct cmd_clk_get_rate_request clk_get_rate;
+ struct cmd_clk_set_rate_request clk_set_rate;
+ struct cmd_clk_round_rate_request clk_round_rate;
+ /** @private */
+ struct cmd_clk_get_parent_request clk_get_parent;
+ struct cmd_clk_set_parent_request clk_set_parent;
+ /** @private */
+ struct cmd_clk_enable_request clk_enable;
+ /** @private */
+ struct cmd_clk_disable_request clk_disable;
+ /** @private */
+ struct cmd_clk_is_enabled_request clk_is_enabled;
+ /** @private */
+ struct cmd_clk_get_all_info_request clk_get_all_info;
+ /** @private */
+ struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Clocks
+ * @brief response to MRQ_CLK
+ *
+ * Each sub-command supported by @ref mrq_clk_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command |payload |
+ * |----------------------------|------------------------|
+ * |CMD_CLK_GET_RATE |clk_get_rate |
+ * |CMD_CLK_SET_RATE |clk_set_rate |
+ * |CMD_CLK_ROUND_RATE |clk_round_rate |
+ * |CMD_CLK_GET_PARENT |clk_get_parent |
+ * |CMD_CLK_SET_PARENT |clk_set_parent |
+ * |CMD_CLK_IS_ENABLED |clk_is_enabled |
+ * |CMD_CLK_ENABLE |- |
+ * |CMD_CLK_DISABLE |- |
+ * |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
+ * |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
+ *
+ */
+
+struct mrq_clk_response {
+ union {
+ struct cmd_clk_get_rate_response clk_get_rate;
+ struct cmd_clk_set_rate_response clk_set_rate;
+ struct cmd_clk_round_rate_response clk_round_rate;
+ struct cmd_clk_get_parent_response clk_get_parent;
+ struct cmd_clk_set_parent_response clk_set_parent;
+ /** @private */
+ struct cmd_clk_enable_response clk_enable;
+ /** @private */
+ struct cmd_clk_disable_response clk_disable;
+ struct cmd_clk_is_enabled_response clk_is_enabled;
+ struct cmd_clk_get_all_info_response clk_get_all_info;
+ struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_QUERY_ABI
+ * @brief check if an MRQ is implemented
+ *
+ * * Platforms: All
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: @ref mrq_query_abi_request
+ * * Response Payload: @ref mrq_query_abi_response
+ */
+
+/**
+ * @ingroup ABI_info
+ * @brief request with MRQ_QUERY_ABI
+ *
+ * Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
+ * by the recipient.
+ */
+struct mrq_query_abi_request {
+ /** @brief MRQ code to query */
+ uint32_t mrq;
+} __ABI_PACKED;
+
+/**
+ * @ingroup ABI_info
+ * @brief response to MRQ_QUERY_ABI
+ */
+struct mrq_query_abi_response {
+ /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
+ int32_t status;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_READ_STATE
+ * @brief read the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_read_state_request
+ * * Response Payload: @ref mrq_pg_read_state_response
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_PG_READ_STATE
+ *
+ * Used by MRQ_PG_READ_STATE call to read the current state of a
+ * partition.
+ */
+struct mrq_pg_read_state_request {
+ /** @brief ID of partition */
+ uint32_t partition_id;
+} __ABI_PACKED;
+
+/**
+ * @brief response to MRQ_PG_READ_STATE
+ * @todo define possible errors.
+ */
+struct mrq_pg_read_state_response {
+ /** @brief read as don't care */
+ uint32_t sram_state;
+ /** @brief state of power partition
+ * * 0 : off
+ * * 1 : on
+ */
+ uint32_t logic_state;
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG_UPDATE_STATE
+ * @brief modify the power-gating state of a partition
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_update_state_request
+ * * Response Payload: N/A
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @brief request with mrq_pg_update_state_request
+ *
+ * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the
+ * state of a power partition #partition_id.
+ */
+struct mrq_pg_update_state_request {
+ /** @brief ID of partition */
+ uint32_t partition_id;
+ /** @brief secondary control of power partition
+ * @details Ignored by many versions of the BPMP
+ * firmware. For maximum compatibility, set the value
+ * according to @logic_state
+ * * 0x1: power ON partition (@ref logic_state == 0x3)
+ * * 0x3: power OFF partition (@ref logic_state == 0x1)
+ */
+ uint32_t sram_state;
+ /** @brief controls state of power partition, legal values are
+ * * 0x1 : power OFF partition
+ * * 0x3 : power ON partition
+ */
+ uint32_t logic_state;
+ /** @brief change state of clocks of the power partition, legal values
+ * * 0x0 : do not change clock state
+ * * 0x1 : disable partition clocks (only applicable when
+ * @ref logic_state == 0x1)
+ * * 0x3 : enable partition clocks (only applicable when
+ * @ref logic_state == 0x3)
+ */
+ uint32_t clock_state;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_THERMAL
+ * @brief interact with BPMP thermal framework
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: Any
+ * * Request Payload: TODO
+ * * Response Payload: TODO
+ *
+ * @addtogroup Thermal
+ *
+ * The BPMP firmware includes a thermal framework. Drivers within the
+ * bpmp firmware register with the framework to provide thermal
+ * zones. Each thermal zone corresponds to an entity whose temperature
+ * can be measured. The framework also has a notion of trip points. A
+ * trip point consists of a thermal zone id, a temperature, and a
+ * callback routine. The framework invokes the callback when the zone
+ * hits the indicated temperature. The BPMP firmware uses this thermal
+ * framework interally to implement various temperature-dependent
+ * functions.
+ *
+ * Software on the CPU can use #MRQ_THERMAL (with payload @ref
+ * mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
+ * framework. The CPU must It can query the number of supported zones,
+ * query zone temperatures, and set trip points.
+ *
+ * When a trip point set by the CPU gets crossed, BPMP firmware issues
+ * an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
+ * payload of @ref mrq_thermal_bpmp_to_host_request.
+ * @{
+ */
+enum mrq_thermal_host_to_bpmp_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified
+ * request type.
+ *
+ * Host needs to supply request parameters.
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_THERMAL_QUERY_ABI = 0,
+
+ /**
+ * @brief Get the current temperature of the specified zone.
+ *
+ * Host needs to supply request parameters.
+ *
+ * mrq_response::err is
+ * * 0: Temperature query succeeded.
+ * * -#BPMP_EINVAL: Invalid request parameters.
+ * * -#BPMP_ENOENT: No driver registered for thermal zone..
+ * * -#BPMP_EFAULT: Problem reading temperature measurement.
+ */
+ CMD_THERMAL_GET_TEMP = 1,
+
+ /**
+ * @brief Enable or disable and set the lower and upper
+ * thermal limits for a thermal trip point. Each zone has
+ * one trip point.
+ *
+ * Host needs to supply request parameters. Once the
+ * temperature hits a trip point, the BPMP will send a message
+ * to the CPU having MRQ=MRQ_THERMAL and
+ * type=CMD_THERMAL_HOST_TRIP_REACHED
+ *
+ * mrq_response::err is
+ * * 0: Trip successfully set.
+ * * -#BPMP_EINVAL: Invalid request parameters.
+ * * -#BPMP_ENOENT: No driver registered for thermal zone.
+ * * -#BPMP_EFAULT: Problem setting trip point.
+ */
+ CMD_THERMAL_SET_TRIP = 2,
+
+ /**
+ * @brief Get the number of supported thermal zones.
+ *
+ * No request parameters required.
+ *
+ * mrq_response::err is always 0, indicating success.
+ */
+ CMD_THERMAL_GET_NUM_ZONES = 3,
+
+ /** @brief: number of supported host-to-bpmp commands. May
+ * increase in future
+ */
+ CMD_THERMAL_HOST_TO_BPMP_NUM
+};
+
+enum mrq_thermal_bpmp_to_host_cmd {
+ /**
+ * @brief Indication that the temperature for a zone has
+ * exceeded the range indicated in the thermal trip point
+ * for the zone.
+ *
+ * BPMP needs to supply request parameters. Host only needs to
+ * acknowledge.
+ */
+ CMD_THERMAL_HOST_TRIP_REACHED = 100,
+
+ /** @brief: number of supported bpmp-to-host commands. May
+ * increase in future
+ */
+ CMD_THERMAL_BPMP_TO_HOST_NUM
+};
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI
+ *
+ * zone: Request type for which to check existence.
+ */
+struct cmd_thermal_query_abi_request {
+ uint32_t type;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP
+ *
+ * zone: Number of thermal zone.
+ */
+struct cmd_thermal_get_temp_request {
+ uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP
+ *
+ * error: 0 if request succeeded.
+ * -BPMP_EINVAL if request parameters were invalid.
+ * -BPMP_ENOENT if no driver was registered for the specified thermal zone.
+ * -BPMP_EFAULT for other thermal zone driver errors.
+ * temp: Current temperature in millicelsius.
+ */
+struct cmd_thermal_get_temp_response {
+ int32_t temp;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP
+ *
+ * zone: Number of thermal zone.
+ * low: Temperature of lower trip point in millicelsius
+ * high: Temperature of upper trip point in millicelsius
+ * enabled: 1 to enable trip point, 0 to disable trip point
+ */
+struct cmd_thermal_set_trip_request {
+ uint32_t zone;
+ int32_t low;
+ int32_t high;
+ uint32_t enabled;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED
+ *
+ * zone: Number of thermal zone where trip point was reached.
+ */
+struct cmd_thermal_host_trip_reached_request {
+ uint32_t zone;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES
+ *
+ * num: Number of supported thermal zones. The thermal zones are indexed
+ * starting from zero.
+ */
+struct cmd_thermal_get_num_zones_response {
+ uint32_t num;
+} __ABI_PACKED;
+
+/*
+ * Host->BPMP request data.
+ *
+ * Reply type is union mrq_thermal_bpmp_to_host_response.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_host_to_bpmp_request {
+ uint32_t type;
+ union {
+ struct cmd_thermal_query_abi_request query_abi;
+ struct cmd_thermal_get_temp_request get_temp;
+ struct cmd_thermal_set_trip_request set_trip;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * BPMP->Host request data.
+ *
+ * type: Type of request. Values listed in enum mrq_thermal_type.
+ * data: Request type specific parameters.
+ */
+struct mrq_thermal_bpmp_to_host_request {
+ uint32_t type;
+ union {
+ struct cmd_thermal_host_trip_reached_request host_trip_reached;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/*
+ * Data in reply to a Host->BPMP request.
+ */
+union mrq_thermal_bpmp_to_host_response {
+ struct cmd_thermal_get_temp_response get_temp;
+ struct cmd_thermal_get_num_zones_response get_num_zones;
+} __ABI_PACKED;
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CPU_VHINT
+ * @brief Query CPU voltage hint data
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cpu_vhint_request
+ * * Response Payload: N/A
+ *
+ * @addtogroup Vhint CPU Voltage hint
+ * @{
+ */
+
+/**
+ * @brief request with #MRQ_CPU_VHINT
+ *
+ * Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
+ * from BPMP to memory space pointed by #addr. CCPLEX is responsible
+ * to allocate sizeof(cpu_vhint_data) sized block of memory and
+ * appropriately map it for BPMP before sending the request.
+ */
+struct mrq_cpu_vhint_request {
+ /** @brief IOVA address for the #cpu_vhint_data */
+ uint32_t addr; /* struct cpu_vhint_data * */
+ /** @brief ID of the cluster whose data is requested */
+ uint32_t cluster_id; /* enum cluster_id */
+} __ABI_PACKED;
+
+/**
+ * @brief description of the CPU v/f relation
+ *
+ * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of
+ * struct mrq_cpu_vhint_request
+ */
+struct cpu_vhint_data {
+ uint32_t ref_clk_hz; /**< reference frequency in Hz */
+ uint16_t pdiv; /**< post divider value */
+ uint16_t mdiv; /**< input divider value */
+ uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
+ /** table of ndiv values as a function of vINDEX (voltage index) */
+ uint16_t ndiv[80];
+ /** minimum allowed NDIV value */
+ uint16_t ndiv_min;
+ /** minimum allowed voltage hint value (as in vINDEX) */
+ uint16_t vfloor;
+ /** maximum allowed voltage hint value (as in vINDEX) */
+ uint16_t vceil;
+ /** post-multiplier for vindex value */
+ uint16_t vindex_mult;
+ /** post-divider for vindex value */
+ uint16_t vindex_div;
+ /** reserved for future use */
+ uint16_t reserved[328];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_ABI_RATCHET
+ * @brief ABI ratchet value query
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_abi_ratchet_request
+ * * Response Payload: @ref mrq_abi_ratchet_response
+ * @addtogroup ABI_info
+ * @{
+ */
+
+/**
+ * @brief an ABI compatibility mechanism
+ *
+ * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
+ * revision of this header file.
+ * 1. That future revision deprecates some MRQ
+ * 2. That future revision introduces a breaking change to an existing
+ * MRQ or
+ * 3. A bug is discovered in an existing implementation of the BPMP-FW
+ * (or possibly one of its clients) which warrants deprecating that
+ * implementation.
+ */
+#define BPMP_ABI_RATCHET_VALUE 3
+
+/**
+ * @brief request with #MRQ_ABI_RATCHET.
+ *
+ * #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which the requester was compiled.
+ *
+ * If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
+ * reply with mrq_response::err = -#BPMP_ERANGE to indicate that
+ * BPMP-FW cannot interoperate correctly with the requester. Requester
+ * should cease further communication with BPMP.
+ *
+ * Otherwise, err shall be 0.
+ */
+struct mrq_abi_ratchet_request {
+ /** @brief requester's ratchet value */
+ uint16_t ratchet;
+};
+
+/**
+ * @brief response to #MRQ_ABI_RATCHET
+ *
+ * #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
+ * against which BPMP firwmare was compiled.
+ *
+ * If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
+ * the requster must either interoperate with BPMP according to an ABI
+ * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease
+ * communication with BPMP.
+ *
+ * If mrq_response::err is 0 and ratchet is greater than or equal to the
+ * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue
+ * normal operation.
+ */
+struct mrq_abi_ratchet_response {
+ /** @brief BPMP's ratchet value */
+ uint16_t ratchet;
+};
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_EMC_DVFS_LATENCY
+ * @brief query frequency dependent EMC DVFS latency
+ *
+ * * Platforms: T186
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_emc_dvfs_latency_response
+ * @addtogroup EMC
+ * @{
+ */
+
+/**
+ * @brief used by @ref mrq_emc_dvfs_latency_response
+ */
+struct emc_dvfs_latency {
+ /** @brief EMC frequency in kHz */
+ uint32_t freq;
+ /** @brief EMC DVFS latency in nanoseconds */
+ uint32_t latency;
+} __ABI_PACKED;
+
+#define EMC_DVFS_LATENCY_MAX_SIZE 14
+/**
+ * @brief response to #MRQ_EMC_DVFS_LATENCY
+ */
+struct mrq_emc_dvfs_latency_response {
+ /** @brief the number valid entries in #pairs */
+ uint32_t num_pairs;
+ /** @brief EMC <frequency, latency> information */
+ struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
+} __ABI_PACKED;
+
+/** @} */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_TRACE_ITER
+ * @brief manage the trace iterator
+ *
+ * * Platforms: All
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_trace_iter_request
+ * @addtogroup Trace
+ * @{
+ */
+enum {
+ /** @brief (re)start the tracing now. Ignore older events */
+ TRACE_ITER_INIT = 0,
+ /** @brief clobber all events in the trace buffer */
+ TRACE_ITER_CLEAN = 1
+};
+
+/**
+ * @brief request with #MRQ_TRACE_ITER
+ */
+struct mrq_trace_iter_request {
+ /** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */
+ uint32_t cmd;
+} __ABI_PACKED;
+
+/** @} */
+
+/*
+ * 4. Enumerations
+ */
+
+/*
+ * 4.1 CPU enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ * 4.2 CPU Cluster enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ *
+ * 4.3 System low power state enumerations
+ *
+ * See <mach-t186/system-t186.h>
+ */
+
+/*
+ * 4.4 Clock enumerations
+ *
+ * For clock enumerations, see <mach-t186/clk-t186.h>
+ */
+
+/*
+ * 4.5 Reset enumerations
+ *
+ * For reset enumerations, see <mach-t186/reset-t186.h>
+ */
+
+/*
+ * 4.6 Thermal sensor enumerations
+ *
+ * For thermal sensor enumerations, see <mach-t186/thermal-t186.h>
+ */
+
+/**
+ * @defgroup Error_Codes
+ * Negative values for mrq_response::err generally indicate some
+ * error. The ABI defines the following error codes. Negating these
+ * defines is an exercise left to the user.
+ * @{
+ */
+/** @brief No such file or directory */
+#define BPMP_ENOENT 2
+/** @brief No MRQ handler */
+#define BPMP_ENOHANDLER 3
+/** @brief I/O error */
+#define BPMP_EIO 5
+/** @brief Bad sub-MRQ command */
+#define BPMP_EBADCMD 6
+/** @brief Not enough memory */
+#define BPMP_ENOMEM 12
+/** @brief Permission denied */
+#define BPMP_EACCES 13
+/** @brief Bad address */
+#define BPMP_EFAULT 14
+/** @brief No such device */
+#define BPMP_ENODEV 19
+/** @brief Argument is a directory */
+#define BPMP_EISDIR 21
+/** @brief Invalid argument */
+#define BPMP_EINVAL 22
+/** @brief Timeout during operation */
+#define BPMP_ETIMEDOUT 23
+/** @brief Out of range */
+#define BPMP_ERANGE 34
+/** @} */
+/** @} */
+#endif
diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h
new file mode 100644
index 000000000000..13dcd44e91bb
--- /dev/null
+++ b/include/soc/tegra/bpmp.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __SOC_TEGRA_BPMP_H
+#define __SOC_TEGRA_BPMP_H
+
+#include <linux/mailbox_client.h>
+#include <linux/reset-controller.h>
+#include <linux/semaphore.h>
+#include <linux/types.h>
+
+#include <soc/tegra/bpmp-abi.h>
+
+struct tegra_bpmp_clk;
+
+struct tegra_bpmp_soc {
+ struct {
+ struct {
+ unsigned int offset;
+ unsigned int count;
+ unsigned int timeout;
+ } cpu_tx, thread, cpu_rx;
+ } channels;
+ unsigned int num_resets;
+};
+
+struct tegra_bpmp_mb_data {
+ u32 code;
+ u32 flags;
+ u8 data[MSG_DATA_MIN_SZ];
+} __packed;
+
+struct tegra_bpmp_channel {
+ struct tegra_bpmp *bpmp;
+ struct tegra_bpmp_mb_data *ib;
+ struct tegra_bpmp_mb_data *ob;
+ struct completion completion;
+ struct tegra_ivc *ivc;
+};
+
+typedef void (*tegra_bpmp_mrq_handler_t)(unsigned int mrq,
+ struct tegra_bpmp_channel *channel,
+ void *data);
+
+struct tegra_bpmp_mrq {
+ struct list_head list;
+ unsigned int mrq;
+ tegra_bpmp_mrq_handler_t handler;
+ void *data;
+};
+
+struct tegra_bpmp {
+ const struct tegra_bpmp_soc *soc;
+ struct device *dev;
+
+ struct {
+ struct gen_pool *pool;
+ dma_addr_t phys;
+ void *virt;
+ } tx, rx;
+
+ struct {
+ struct mbox_client client;
+ struct mbox_chan *channel;
+ } mbox;
+
+ struct tegra_bpmp_channel *channels;
+ unsigned int num_channels;
+
+ struct {
+ unsigned long *allocated;
+ unsigned long *busy;
+ unsigned int count;
+ struct semaphore lock;
+ } threaded;
+
+ struct list_head mrqs;
+ spinlock_t lock;
+
+ struct tegra_bpmp_clk **clocks;
+ unsigned int num_clocks;
+
+ struct reset_controller_dev rstc;
+};
+
+struct tegra_bpmp *tegra_bpmp_get(struct device *dev);
+void tegra_bpmp_put(struct tegra_bpmp *bpmp);
+
+struct tegra_bpmp_message {
+ unsigned int mrq;
+
+ struct {
+ const void *data;
+ size_t size;
+ } tx;
+
+ struct {
+ void *data;
+ size_t size;
+ } rx;
+};
+
+int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp,
+ struct tegra_bpmp_message *msg);
+int tegra_bpmp_transfer(struct tegra_bpmp *bpmp,
+ struct tegra_bpmp_message *msg);
+
+int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq,
+ tegra_bpmp_mrq_handler_t handler, void *data);
+void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq,
+ void *data);
+
+#if IS_ENABLED(CONFIG_CLK_TEGRA_BPMP)
+int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp);
+#else
+static inline int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp)
+{
+ return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_RESET_TEGRA_BPMP)
+int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp);
+#else
+static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp)
+{
+ return 0;
+}
+#endif
+
+#endif /* __SOC_TEGRA_BPMP_H */
diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h
new file mode 100644
index 000000000000..b13cc43ad9d8
--- /dev/null
+++ b/include/soc/tegra/ivc.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __TEGRA_IVC_H
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+
+struct tegra_ivc_header;
+
+struct tegra_ivc {
+ struct device *peer;
+
+ struct {
+ struct tegra_ivc_header *channel;
+ unsigned int position;
+ dma_addr_t phys;
+ } rx, tx;
+
+ void (*notify)(struct tegra_ivc *ivc, void *data);
+ void *notify_data;
+
+ unsigned int num_frames;
+ size_t frame_size;
+};
+
+/**
+ * tegra_ivc_read_get_next_frame - Peek at the next frame to receive
+ * @ivc pointer of the IVC channel
+ *
+ * Peek at the next frame to be received, without removing it from
+ * the queue.
+ *
+ * Returns a pointer to the frame, or an error encoded pointer.
+ */
+void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_read_advance - Advance the read queue
+ * @ivc pointer of the IVC channel
+ *
+ * Advance the read queue
+ *
+ * Returns 0, or a negative error value if failed.
+ */
+int tegra_ivc_read_advance(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_write_get_next_frame - Poke at the next frame to transmit
+ * @ivc pointer of the IVC channel
+ *
+ * Get access to the next frame.
+ *
+ * Returns a pointer to the frame, or an error encoded pointer.
+ */
+void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_write_advance - Advance the write queue
+ * @ivc pointer of the IVC channel
+ *
+ * Advance the write queue
+ *
+ * Returns 0, or a negative error value if failed.
+ */
+int tegra_ivc_write_advance(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_notified - handle internal messages
+ * @ivc pointer of the IVC channel
+ *
+ * This function must be called following every notification.
+ *
+ * Returns 0 if the channel is ready for communication, or -EAGAIN if a channel
+ * reset is in progress.
+ */
+int tegra_ivc_notified(struct tegra_ivc *ivc);
+
+/**
+ * tegra_ivc_reset - initiates a reset of the shared memory state
+ * @ivc pointer of the IVC channel
+ *
+ * This function must be called after a channel is reserved before it is used
+ * for communication. The channel will be ready for use when a subsequent call
+ * to notify the remote of the channel reset.
+ */
+void tegra_ivc_reset(struct tegra_ivc *ivc);
+
+size_t tegra_ivc_align(size_t size);
+unsigned tegra_ivc_total_queue_size(unsigned queue_size);
+int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx,
+ dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys,
+ unsigned int num_frames, size_t frame_size,
+ void (*notify)(struct tegra_ivc *ivc, void *data),
+ void *data);
+void tegra_ivc_cleanup(struct tegra_ivc *ivc);
+
+#endif /* __TEGRA_IVC_H */
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index e9e53473a63e..2f271d1b9cea 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -76,37 +76,73 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid);
#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
-#define TEGRA_IO_RAIL_CSIA 0
-#define TEGRA_IO_RAIL_CSIB 1
-#define TEGRA_IO_RAIL_DSI 2
-#define TEGRA_IO_RAIL_MIPI_BIAS 3
-#define TEGRA_IO_RAIL_PEX_BIAS 4
-#define TEGRA_IO_RAIL_PEX_CLK1 5
-#define TEGRA_IO_RAIL_PEX_CLK2 6
-#define TEGRA_IO_RAIL_USB0 9
-#define TEGRA_IO_RAIL_USB1 10
-#define TEGRA_IO_RAIL_USB2 11
-#define TEGRA_IO_RAIL_USB_BIAS 12
-#define TEGRA_IO_RAIL_NAND 13
-#define TEGRA_IO_RAIL_UART 14
-#define TEGRA_IO_RAIL_BB 15
-#define TEGRA_IO_RAIL_AUDIO 17
-#define TEGRA_IO_RAIL_HSIC 19
-#define TEGRA_IO_RAIL_COMP 22
-#define TEGRA_IO_RAIL_HDMI 28
-#define TEGRA_IO_RAIL_PEX_CNTRL 32
-#define TEGRA_IO_RAIL_SDMMC1 33
-#define TEGRA_IO_RAIL_SDMMC3 34
-#define TEGRA_IO_RAIL_SDMMC4 35
-#define TEGRA_IO_RAIL_CAM 36
-#define TEGRA_IO_RAIL_RES 37
-#define TEGRA_IO_RAIL_HV 38
-#define TEGRA_IO_RAIL_DSIB 39
-#define TEGRA_IO_RAIL_DSIC 40
-#define TEGRA_IO_RAIL_DSID 41
-#define TEGRA_IO_RAIL_CSIE 44
-#define TEGRA_IO_RAIL_LVDS 57
-#define TEGRA_IO_RAIL_SYS_DDC 58
+/**
+ * enum tegra_io_pad - I/O pad group identifier
+ *
+ * I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad
+ * can be used to control the common voltage signal level and power state of
+ * the pins of the given pad.
+ */
+enum tegra_io_pad {
+ TEGRA_IO_PAD_AUDIO,
+ TEGRA_IO_PAD_AUDIO_HV,
+ TEGRA_IO_PAD_BB,
+ TEGRA_IO_PAD_CAM,
+ TEGRA_IO_PAD_COMP,
+ TEGRA_IO_PAD_CSIA,
+ TEGRA_IO_PAD_CSIB,
+ TEGRA_IO_PAD_CSIC,
+ TEGRA_IO_PAD_CSID,
+ TEGRA_IO_PAD_CSIE,
+ TEGRA_IO_PAD_CSIF,
+ TEGRA_IO_PAD_DBG,
+ TEGRA_IO_PAD_DEBUG_NONAO,
+ TEGRA_IO_PAD_DMIC,
+ TEGRA_IO_PAD_DP,
+ TEGRA_IO_PAD_DSI,
+ TEGRA_IO_PAD_DSIB,
+ TEGRA_IO_PAD_DSIC,
+ TEGRA_IO_PAD_DSID,
+ TEGRA_IO_PAD_EMMC,
+ TEGRA_IO_PAD_EMMC2,
+ TEGRA_IO_PAD_GPIO,
+ TEGRA_IO_PAD_HDMI,
+ TEGRA_IO_PAD_HSIC,
+ TEGRA_IO_PAD_HV,
+ TEGRA_IO_PAD_LVDS,
+ TEGRA_IO_PAD_MIPI_BIAS,
+ TEGRA_IO_PAD_NAND,
+ TEGRA_IO_PAD_PEX_BIAS,
+ TEGRA_IO_PAD_PEX_CLK1,
+ TEGRA_IO_PAD_PEX_CLK2,
+ TEGRA_IO_PAD_PEX_CNTRL,
+ TEGRA_IO_PAD_SDMMC1,
+ TEGRA_IO_PAD_SDMMC3,
+ TEGRA_IO_PAD_SDMMC4,
+ TEGRA_IO_PAD_SPI,
+ TEGRA_IO_PAD_SPI_HV,
+ TEGRA_IO_PAD_SYS_DDC,
+ TEGRA_IO_PAD_UART,
+ TEGRA_IO_PAD_USB0,
+ TEGRA_IO_PAD_USB1,
+ TEGRA_IO_PAD_USB2,
+ TEGRA_IO_PAD_USB3,
+ TEGRA_IO_PAD_USB_BIAS,
+};
+
+/* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */
+#define TEGRA_IO_RAIL_HDMI TEGRA_IO_PAD_HDMI
+#define TEGRA_IO_RAIL_LVDS TEGRA_IO_PAD_LVDS
+
+/**
+ * enum tegra_io_pad_voltage - voltage level of the I/O pad's source rail
+ * @TEGRA_IO_PAD_1800000UV: 1.8 V
+ * @TEGRA_IO_PAD_3300000UV: 3.3 V
+ */
+enum tegra_io_pad_voltage {
+ TEGRA_IO_PAD_1800000UV,
+ TEGRA_IO_PAD_3300000UV,
+};
#ifdef CONFIG_ARCH_TEGRA
int tegra_powergate_is_powered(unsigned int id);
@@ -118,6 +154,13 @@ int tegra_powergate_remove_clamping(unsigned int id);
int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk,
struct reset_control *rst);
+int tegra_io_pad_power_enable(enum tegra_io_pad id);
+int tegra_io_pad_power_disable(enum tegra_io_pad id);
+int tegra_io_pad_set_voltage(enum tegra_io_pad id,
+ enum tegra_io_pad_voltage voltage);
+int tegra_io_pad_get_voltage(enum tegra_io_pad id);
+
+/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */
int tegra_io_rail_power_on(unsigned int id);
int tegra_io_rail_power_off(unsigned int id);
#else
@@ -148,6 +191,27 @@ static inline int tegra_powergate_sequence_power_up(unsigned int id,
return -ENOSYS;
}
+static inline int tegra_io_pad_power_enable(enum tegra_io_pad id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_io_pad_power_disable(enum tegra_io_pad id)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_io_pad_set_voltage(enum tegra_io_pad id,
+ enum tegra_io_pad_voltage voltage)
+{
+ return -ENOSYS;
+}
+
+static inline int tegra_io_pad_get_voltage(enum tegra_io_pad id)
+{
+ return -ENOSYS;
+}
+
static inline int tegra_io_rail_power_on(unsigned int id)
{
return -ENOSYS;