summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/ide/Makefile3
-rw-r--r--drivers/ide/ide-floppy.c296
-rw-r--r--drivers/ide/ide-floppy.h63
-rw-r--r--drivers/ide/ide-floppy_ioctl.c243
4 files changed, 317 insertions, 288 deletions
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 76a30d763384..308b8a12f314 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -37,11 +37,12 @@ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
+ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o
obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
+obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
-obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy.o
ifeq ($(CONFIG_BLK_DEV_IDECS), y)
ide-cs-core-y += legacy/ide-cs.o
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 78d92835a3c1..ca12a230d9a6 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -46,6 +46,8 @@
#include <linux/io.h>
#include <asm/unaligned.h>
+#include "ide-floppy.h"
+
/* define to see debug info */
#define IDEFLOPPY_DEBUG_LOG 0
@@ -75,61 +77,11 @@
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
-/*
- * Most of our global data which we need to save even as we leave the driver
- * due to an interrupt or a timer event is stored in a variable of type
- * idefloppy_floppy_t, defined below.
- */
-typedef struct ide_floppy_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-
- /* Current packet command */
- struct ide_atapi_pc *pc;
- /* Last failed packet command */
- struct ide_atapi_pc *failed_pc;
- /* used for blk_{fs,pc}_request() requests */
- struct ide_atapi_pc queued_pc;
-
- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
- /* Last error information */
- u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
- int progress_indication;
-
- /* Device information */
- /* Current format */
- int blocks, block_size, bs_factor;
- /* Last format capacity descriptor */
- u8 cap_desc[8];
- /* Copy of the flexible disk page */
- u8 flexible_disk_page[32];
-} idefloppy_floppy_t;
-
#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
-/* IOCTLs used in low-level formatting. */
-#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
-#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
-#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
-#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
-
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
-/*
- * Pages of the SELECT SENSE / MODE SENSE packet commands.
- * See SFF-8070i spec.
- */
-#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
-#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
-
static DEFINE_MUTEX(idefloppy_ref_mutex);
#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
@@ -245,7 +197,7 @@ static void ide_floppy_callback(ide_drive_t *drive)
idefloppy_end_request(drive, uptodate, 0);
}
-static void idefloppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
+void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
{
ide_init_pc(pc);
pc->c[0] = GPCMD_REQUEST_SENSE;
@@ -264,7 +216,7 @@ static void idefloppy_retry_pc(ide_drive_t *drive)
struct ide_atapi_pc *pc = &floppy->request_sense_pc;
(void)ide_read_error(drive);
- idefloppy_create_request_sense_cmd(pc);
+ ide_floppy_create_request_sense_cmd(pc);
ide_queue_pc_head(drive, floppy->disk, pc, rq);
}
@@ -382,7 +334,7 @@ static void idefloppy_create_prevent_cmd(struct ide_atapi_pc *pc, int prevent)
pc->c[4] = prevent;
}
-static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
+void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
{
ide_init_pc(pc);
pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
@@ -391,30 +343,8 @@ static void idefloppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
pc->req_xfer = 255;
}
-static void idefloppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
- int l, int flags)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_FORMAT_UNIT;
- pc->c[1] = 0x17;
-
- memset(pc->buf, 0, 12);
- pc->buf[1] = 0xA2;
- /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
-
- if (flags & 1) /* Verify bit on... */
- pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
- pc->buf[3] = 8;
-
- put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
- put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
- pc->buf_size = 12;
- pc->flags |= PC_FLAG_WRITING;
-}
-
/* A mode sense command is used to "sense" floppy parameters. */
-static void idefloppy_create_mode_sense_cmd(struct ide_atapi_pc *pc,
- u8 page_code)
+void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
@@ -563,7 +493,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
u16 transfer_rate, sector_size, cyls, rpm;
u8 heads, sectors;
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
+ ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
if (ide_queue_pc_tail(drive, disk, &pc)) {
printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
@@ -611,25 +541,6 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
return 0;
}
-static int idefloppy_get_sfrp_bit(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
-
- drive->atapi_flags &= ~IDE_AFLAG_SRFP;
-
- idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
- pc.flags |= PC_FLAG_SUPPRESS_ERROR;
-
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
- return 1;
-
- if (pc.buf[8 + 2] & 0x40)
- drive->atapi_flags |= IDE_AFLAG_SRFP;
-
- return 0;
-}
-
/*
* Determine if a media is present in the floppy drive, and if so, its LBA
* capacity.
@@ -649,7 +560,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
floppy->bs_factor = 1;
set_capacity(floppy->disk, 0);
- idefloppy_create_read_capacity_cmd(&pc);
+ ide_floppy_create_read_capacity_cmd(&pc);
if (ide_queue_pc_tail(drive, disk, &pc)) {
printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
return 1;
@@ -730,129 +641,6 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
return rc;
}
-/*
- * Obtain the list of formattable capacities.
- * Very similar to ide_floppy_get_capacity, except that we push the capacity
- * descriptors to userland, instead of our own structures.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_capacities {
- * int nformats;
- * struct {
- * int nblocks;
- * int blocksize;
- * } formats[];
- * };
- *
- * userland initializes nformats to the number of allocated formats[] records.
- * On exit we set nformats to the number of records we've actually initialized.
- */
-
-static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
- u8 header_len, desc_cnt;
- int i, blocks, length, u_array_size, u_index;
- int __user *argp;
-
- if (get_user(u_array_size, arg))
- return -EFAULT;
-
- if (u_array_size <= 0)
- return -EINVAL;
-
- idefloppy_create_read_capacity_cmd(&pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
- return -EIO;
- }
-
- header_len = pc.buf[3];
- desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
- u_index = 0;
- argp = arg + 1;
-
- /*
- * We always skip the first capacity descriptor. That's the current
- * capacity. We are interested in the remaining descriptors, the
- * formattable capacities.
- */
- for (i = 1; i < desc_cnt; i++) {
- unsigned int desc_start = 4 + i*8;
-
- if (u_index >= u_array_size)
- break; /* User-supplied buffer too small */
-
- blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
- length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
-
- if (put_user(blocks, argp))
- return -EFAULT;
-
- ++argp;
-
- if (put_user(length, argp))
- return -EFAULT;
-
- ++argp;
-
- ++u_index;
- }
-
- if (put_user(u_index, arg))
- return -EFAULT;
-
- return 0;
-}
-
-/*
- * Get ATAPI_FORMAT_UNIT progress indication.
- *
- * Userland gives a pointer to an int. The int is set to a progress
- * indicator 0-65536, with 65536=100%.
- *
- * If the drive does not support format progress indication, we just check
- * the dsc bit, and return either 0 or 65536.
- */
-
-static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
- int progress_indication = 0x10000;
-
- if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- idefloppy_create_request_sense_cmd(&pc);
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
- return -EIO;
-
- if (floppy->sense_key == 2 &&
- floppy->asc == 4 &&
- floppy->ascq == 4)
- progress_indication = floppy->progress_indication;
-
- /* Else assume format_unit has finished, and we're at 0x10000 */
- } else {
- ide_hwif_t *hwif = drive->hwif;
- unsigned long flags;
- u8 stat;
-
- local_irq_save(flags);
- stat = hwif->tp_ops->read_status(hwif);
- local_irq_restore(flags);
-
- progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
- }
-
- if (put_user(progress_indication, arg))
- return -EFAULT;
-
- return 0;
-}
-
static sector_t idefloppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
@@ -1118,73 +906,6 @@ static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
return 0;
}
-static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc pc;
- int blocks, length, flags, err = 0;
-
- if (floppy->openers > 1) {
- /* Don't format if someone is using the disk */
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return -EBUSY;
- }
-
- drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
-
- /*
- * Send ATAPI_FORMAT_UNIT to the drive.
- *
- * Userland gives us the following structure:
- *
- * struct idefloppy_format_command {
- * int nblocks;
- * int blocksize;
- * int flags;
- * } ;
- *
- * flags is a bitmask, currently, the only defined flag is:
- *
- * 0x01 - verify media after format.
- */
- if (get_user(blocks, arg) ||
- get_user(length, arg+1) ||
- get_user(flags, arg+2)) {
- err = -EFAULT;
- goto out;
- }
-
- (void) idefloppy_get_sfrp_bit(drive);
- idefloppy_create_format_unit_cmd(&pc, blocks, length, flags);
-
- if (ide_queue_pc_tail(drive, floppy->disk, &pc))
- err = -EIO;
-
-out:
- if (err)
- drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
- return err;
-}
-
-static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
- unsigned int cmd, void __user *argp)
-{
- switch (cmd) {
- case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
- return 0;
- case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
- return ide_floppy_get_format_capacities(drive, argp);
- case IDEFLOPPY_IOCTL_FORMAT_START:
- if (!(file->f_mode & 2))
- return -EPERM;
- return ide_floppy_format_unit(drive, (int __user *)argp);
- case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
- return ide_floppy_get_format_progress(drive, argp);
- default:
- return -ENOTTY;
- }
-}
-
static int idefloppy_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -1316,6 +1037,7 @@ static int __init idefloppy_init(void)
}
MODULE_ALIAS("ide:*m-floppy*");
+MODULE_ALIAS("ide-floppy");
module_init(idefloppy_init);
module_exit(idefloppy_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
new file mode 100644
index 000000000000..ecadc2bc322d
--- /dev/null
+++ b/drivers/ide/ide-floppy.h
@@ -0,0 +1,63 @@
+#ifndef __IDE_FLOPPY_H
+#define __IDE_FLOPPY_H
+
+/*
+ * Most of our global data which we need to save even as we leave the driver
+ * due to an interrupt or a timer event is stored in a variable of type
+ * idefloppy_floppy_t, defined below.
+ */
+typedef struct ide_floppy_obj {
+ ide_drive_t *drive;
+ ide_driver_t *driver;
+ struct gendisk *disk;
+ struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
+
+ /* Current packet command */
+ struct ide_atapi_pc *pc;
+ /* Last failed packet command */
+ struct ide_atapi_pc *failed_pc;
+ /* used for blk_{fs,pc}_request() requests */
+ struct ide_atapi_pc queued_pc;
+
+ struct ide_atapi_pc request_sense_pc;
+ struct request request_sense_rq;
+
+ /* Last error information */
+ u8 sense_key, asc, ascq;
+ /* delay this long before sending packet command */
+ u8 ticks;
+ int progress_indication;
+
+ /* Device information */
+ /* Current format */
+ int blocks, block_size, bs_factor;
+ /* Last format capacity descriptor */
+ u8 cap_desc[8];
+ /* Copy of the flexible disk page */
+ u8 flexible_disk_page[32];
+} idefloppy_floppy_t;
+
+/*
+ * Pages of the SELECT SENSE / MODE SENSE packet commands.
+ * See SFF-8070i spec.
+ */
+#define IDEFLOPPY_CAPABILITIES_PAGE 0x1b
+#define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05
+
+/* IOCTLs used in low-level formatting. */
+#define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600
+#define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601
+#define IDEFLOPPY_IOCTL_FORMAT_START 0x4602
+#define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603
+
+/* ide-floppy.c */
+void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
+void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
+void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *);
+
+/* ide-floppy_ioctl.c */
+int ide_floppy_format_ioctl(ide_drive_t *, struct file *, unsigned int,
+ void __user *);
+
+#endif /*__IDE_FLOPPY_H */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
new file mode 100644
index 000000000000..5ffc4512d14b
--- /dev/null
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -0,0 +1,243 @@
+/*
+ * ide-floppy IOCTLs handling.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/cdrom.h>
+
+#include <asm/unaligned.h>
+
+#include <scsi/scsi_ioctl.h>
+
+#include "ide-floppy.h"
+
+/*
+ * Obtain the list of formattable capacities.
+ * Very similar to ide_floppy_get_capacity, except that we push the capacity
+ * descriptors to userland, instead of our own structures.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_capacities {
+ * int nformats;
+ * struct {
+ * int nblocks;
+ * int blocksize;
+ * } formats[];
+ * };
+ *
+ * userland initializes nformats to the number of allocated formats[] records.
+ * On exit we set nformats to the number of records we've actually initialized.
+ */
+
+static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
+{
+ struct ide_floppy_obj *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ u8 header_len, desc_cnt;
+ int i, blocks, length, u_array_size, u_index;
+ int __user *argp;
+
+ if (get_user(u_array_size, arg))
+ return -EFAULT;
+
+ if (u_array_size <= 0)
+ return -EINVAL;
+
+ ide_floppy_create_read_capacity_cmd(&pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc)) {
+ printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ return -EIO;
+ }
+
+ header_len = pc.buf[3];
+ desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
+
+ u_index = 0;
+ argp = arg + 1;
+
+ /*
+ * We always skip the first capacity descriptor. That's the current
+ * capacity. We are interested in the remaining descriptors, the
+ * formattable capacities.
+ */
+ for (i = 1; i < desc_cnt; i++) {
+ unsigned int desc_start = 4 + i*8;
+
+ if (u_index >= u_array_size)
+ break; /* User-supplied buffer too small */
+
+ blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
+ length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
+
+ if (put_user(blocks, argp))
+ return -EFAULT;
+
+ ++argp;
+
+ if (put_user(length, argp))
+ return -EFAULT;
+
+ ++argp;
+
+ ++u_index;
+ }
+
+ if (put_user(u_index, arg))
+ return -EFAULT;
+
+ return 0;
+}
+
+static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
+ int l, int flags)
+{
+ ide_init_pc(pc);
+ pc->c[0] = GPCMD_FORMAT_UNIT;
+ pc->c[1] = 0x17;
+
+ memset(pc->buf, 0, 12);
+ pc->buf[1] = 0xA2;
+ /* Default format list header, u8 1: FOV/DCRT/IMM bits set */
+
+ if (flags & 1) /* Verify bit on... */
+ pc->buf[1] ^= 0x20; /* ... turn off DCRT bit */
+ pc->buf[3] = 8;
+
+ put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buf[4]));
+ put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buf[8]));
+ pc->buf_size = 12;
+ pc->flags |= PC_FLAG_WRITING;
+}
+
+static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+
+ drive->atapi_flags &= ~IDE_AFLAG_SRFP;
+
+ ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE);
+ pc.flags |= PC_FLAG_SUPPRESS_ERROR;
+
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ return 1;
+
+ if (pc.buf[8 + 2] & 0x40)
+ drive->atapi_flags |= IDE_AFLAG_SRFP;
+
+ return 0;
+}
+
+static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ int blocks, length, flags, err = 0;
+
+ if (floppy->openers > 1) {
+ /* Don't format if someone is using the disk */
+ drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+ return -EBUSY;
+ }
+
+ drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
+
+ /*
+ * Send ATAPI_FORMAT_UNIT to the drive.
+ *
+ * Userland gives us the following structure:
+ *
+ * struct idefloppy_format_command {
+ * int nblocks;
+ * int blocksize;
+ * int flags;
+ * } ;
+ *
+ * flags is a bitmask, currently, the only defined flag is:
+ *
+ * 0x01 - verify media after format.
+ */
+ if (get_user(blocks, arg) ||
+ get_user(length, arg+1) ||
+ get_user(flags, arg+2)) {
+ err = -EFAULT;
+ goto out;
+ }
+
+ (void)ide_floppy_get_sfrp_bit(drive);
+ ide_floppy_create_format_unit_cmd(&pc, blocks, length, flags);
+
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ err = -EIO;
+
+out:
+ if (err)
+ drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+ return err;
+}
+
+/*
+ * Get ATAPI_FORMAT_UNIT progress indication.
+ *
+ * Userland gives a pointer to an int. The int is set to a progress
+ * indicator 0-65536, with 65536=100%.
+ *
+ * If the drive does not support format progress indication, we just check
+ * the dsc bit, and return either 0 or 65536.
+ */
+
+static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct ide_atapi_pc pc;
+ int progress_indication = 0x10000;
+
+ if (drive->atapi_flags & IDE_AFLAG_SRFP) {
+ ide_floppy_create_request_sense_cmd(&pc);
+ if (ide_queue_pc_tail(drive, floppy->disk, &pc))
+ return -EIO;
+
+ if (floppy->sense_key == 2 &&
+ floppy->asc == 4 &&
+ floppy->ascq == 4)
+ progress_indication = floppy->progress_indication;
+
+ /* Else assume format_unit has finished, and we're at 0x10000 */
+ } else {
+ ide_hwif_t *hwif = drive->hwif;
+ unsigned long flags;
+ u8 stat;
+
+ local_irq_save(flags);
+ stat = hwif->tp_ops->read_status(hwif);
+ local_irq_restore(flags);
+
+ progress_indication = ((stat & ATA_DSC) == 0) ? 0 : 0x10000;
+ }
+
+ if (put_user(progress_indication, arg))
+ return -EFAULT;
+
+ return 0;
+}
+
+int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
+ unsigned int cmd, void __user *argp)
+{
+ switch (cmd) {
+ case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
+ return 0;
+ case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY:
+ return ide_floppy_get_format_capacities(drive, argp);
+ case IDEFLOPPY_IOCTL_FORMAT_START:
+ if (!(file->f_mode & 2))
+ return -EPERM;
+ return ide_floppy_format_unit(drive, (int __user *)argp);
+ case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS:
+ return ide_floppy_get_format_progress(drive, argp);
+ default:
+ return -ENOTTY;
+ }
+}