diff options
| -rw-r--r-- | drivers/gpu/drm/bridge/parade-ps8640.c | 68 |
1 files changed, 58 insertions, 10 deletions
diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c index 9f7b7a9c53c5..7bd0affa057a 100644 --- a/drivers/gpu/drm/bridge/parade-ps8640.c +++ b/drivers/gpu/drm/bridge/parade-ps8640.c @@ -65,6 +65,7 @@ struct ps8640 { struct regulator_bulk_data supplies[2]; struct gpio_desc *gpio_reset; struct gpio_desc *gpio_powerdown; + bool powered; }; static inline struct ps8640 *bridge_to_ps8640(struct drm_bridge *e) @@ -91,13 +92,15 @@ static int ps8640_bridge_vdo_control(struct ps8640 *ps_bridge, return 0; } -static void ps8640_pre_enable(struct drm_bridge *bridge) +static void ps8640_bridge_poweron(struct ps8640 *ps_bridge) { - struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); struct i2c_client *client = ps_bridge->page[PAGE2_TOP_CNTL]; unsigned long timeout; int ret, status; + if (ps_bridge->powered) + return; + ret = regulator_bulk_enable(ARRAY_SIZE(ps_bridge->supplies), ps_bridge->supplies); if (ret < 0) { @@ -152,10 +155,6 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; } - ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE); - if (ret) - goto err_regulators_disable; - /* Switch access edp panel's edid through i2c */ ret = i2c_smbus_write_byte_data(client, PAGE2_I2C_BYPASS, I2C_BYPASS_EN); @@ -164,6 +163,8 @@ static void ps8640_pre_enable(struct drm_bridge *bridge) goto err_regulators_disable; } + ps_bridge->powered = true; + return; err_regulators_disable: @@ -171,12 +172,12 @@ err_regulators_disable: ps_bridge->supplies); } -static void ps8640_post_disable(struct drm_bridge *bridge) +static void ps8640_bridge_poweroff(struct ps8640 *ps_bridge) { - struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); int ret; - ps8640_bridge_vdo_control(ps_bridge, DISABLE); + if (!ps_bridge->powered) + return; gpiod_set_value(ps_bridge->gpio_reset, 1); gpiod_set_value(ps_bridge->gpio_powerdown, 1); @@ -184,6 +185,28 @@ static void ps8640_post_disable(struct drm_bridge *bridge) ps_bridge->supplies); if (ret < 0) DRM_ERROR("cannot disable regulators %d\n", ret); + + ps_bridge->powered = false; +} + +static void ps8640_pre_enable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + int ret; + + ps8640_bridge_poweron(ps_bridge); + + ret = ps8640_bridge_vdo_control(ps_bridge, ENABLE); + if (ret < 0) + ps8640_bridge_poweroff(ps_bridge); +} + +static void ps8640_post_disable(struct drm_bridge *bridge) +{ + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + + ps8640_bridge_vdo_control(ps_bridge, DISABLE); + ps8640_bridge_poweroff(ps_bridge); } static int ps8640_bridge_attach(struct drm_bridge *bridge, @@ -249,9 +272,34 @@ static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge, struct drm_connector *connector) { struct ps8640 *ps_bridge = bridge_to_ps8640(bridge); + bool poweroff = !ps_bridge->powered; + struct edid *edid; + + /* + * When we end calling get_edid() triggered by an ioctl, i.e + * + * drm_mode_getconnector (ioctl) + * -> drm_helper_probe_single_connector_modes + * -> drm_bridge_connector_get_modes + * -> ps8640_bridge_get_edid + * + * We need to make sure that what we need is enabled before reading + * EDID, for this chip, we need to do a full poweron, otherwise it will + * fail. + */ + drm_bridge_chain_pre_enable(bridge); - return drm_get_edid(connector, + edid = drm_get_edid(connector, ps_bridge->page[PAGE0_DP_CNTL]->adapter); + + /* + * If we call the get_edid() function without having enabled the chip + * before, return the chip to its original power state. + */ + if (poweroff) + drm_bridge_chain_post_disable(bridge); + + return edid; } static const struct drm_bridge_funcs ps8640_bridge_funcs = { |