summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/cris/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/axisflashmap.c19
-rw-r--r--arch/cris/arch-v10/drivers/eeprom.c2
-rw-r--r--arch/cris/arch-v10/lib/dram_init.S2
-rw-r--r--arch/cris/arch-v32/drivers/cryptocop.c2
-rw-r--r--arch/cris/arch-v32/drivers/pci/bios.c2
-rw-r--r--arch/cris/arch-v32/drivers/sync_serial.c6
-rw-r--r--arch/cris/arch-v32/kernel/fasttimer.c15
-rw-r--r--arch/cris/arch-v32/kernel/irq.c3
-rw-r--r--arch/cris/arch-v32/mach-a3/dma.c1
-rw-r--r--arch/cris/arch-v32/mach-a3/dram_init.S2
-rw-r--r--arch/cris/arch-v32/mach-fs/dma.c1
-rw-r--r--arch/cris/arch-v32/mach-fs/dram_init.S2
-rw-r--r--arch/cris/arch-v32/mm/intmem.c13
-rw-r--r--arch/cris/configs/artpec_3_defconfig1
-rw-r--r--arch/cris/configs/dev88_defconfig48
-rw-r--r--arch/cris/configs/etrax-100lx_v2_defconfig1
-rw-r--r--arch/cris/configs/etraxfs_defconfig1
-rw-r--r--arch/cris/include/arch-v32/arch/cryptocop.h2
-rw-r--r--arch/cris/include/asm/io.h171
-rw-r--r--arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h2
-rw-r--r--arch/cris/mm/fault.c2
22 files changed, 83 insertions, 217 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index deba2662b9f3..71b758dc3a96 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -30,7 +30,7 @@ config GENERIC_CALIBRATE_DELAY
default y
config NO_IOPORT_MAP
- def_bool y
+ def_bool y if !PCI
config FORCE_MAX_ZONEORDER
int
diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c
index bdc25aa43468..28292da49664 100644
--- a/arch/cris/arch-v10/drivers/axisflashmap.c
+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
@@ -177,15 +177,6 @@ static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
},
};
-#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-/* Main flash device */
-static struct mtd_partition main_partition = {
- .name = "main",
- .size = 0,
- .offset = 0
-};
-#endif
-
/*
* Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
* chips in that order (because the amd_flash-driver is faster).
@@ -369,16 +360,6 @@ static int __init init_axis_flash(void)
pidx++;
}
-#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
- if (mymtd) {
- main_partition.size = mymtd->size;
- err = mtd_device_register(mymtd, &main_partition, 1);
- if (err)
- panic("axisflashmap: Could not initialize "
- "partition for whole main mtd device!\n");
- }
-#endif
-
if (mymtd) {
if (use_default_ptable) {
printk(KERN_INFO " Using default partition table.\n");
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index f679a19dfeb8..c903a9e53a47 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -395,7 +395,7 @@ static int eeprom_open(struct inode * inode, struct file * file)
static loff_t eeprom_lseek(struct file * file, loff_t offset, int orig)
{
/*
- * orig 0: position from begning of eeprom
+ * orig 0: position from beginning of eeprom
* orig 1: relative from current position
* orig 2: position from last eeprom address
*/
diff --git a/arch/cris/arch-v10/lib/dram_init.S b/arch/cris/arch-v10/lib/dram_init.S
index e541d3d8f922..93310124333f 100644
--- a/arch/cris/arch-v10/lib/dram_init.S
+++ b/arch/cris/arch-v10/lib/dram_init.S
@@ -3,7 +3,7 @@
* This file is intended to be included from other assembler files
*
* Note: This file may not modify r9 because r9 is used to carry
- * information from the decompresser to the kernel
+ * information from the decompressor to the kernel
*
* Copyright (C) 2000-2012 Axis Communications AB
*
diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c
index 2081d8b45f06..b5698c876fcc 100644
--- a/arch/cris/arch-v32/drivers/cryptocop.c
+++ b/arch/cris/arch-v32/drivers/cryptocop.c
@@ -1210,7 +1210,7 @@ static int cryptocop_setup_dma_list(struct cryptocop_operation *operation, struc
assert(active_count >= eop_needed_count);
assert((eop_needed_count == 0) || (eop_needed_count == 1));
if (eop_needed_count) {
- /* This means that the bulk operation (cipeher/m2m) is terminated. */
+ /* This means that the bulk operation (cipher/m2m) is terminated. */
if (active_count > 1) {
/* Use zero length EOP descriptor. */
struct cryptocop_dma_desc *ed = alloc_cdesc(alloc_flag);
diff --git a/arch/cris/arch-v32/drivers/pci/bios.c b/arch/cris/arch-v32/drivers/pci/bios.c
index 64a5fb93767d..212266a2c5d9 100644
--- a/arch/cris/arch-v32/drivers/pci/bios.c
+++ b/arch/cris/arch-v32/drivers/pci/bios.c
@@ -1,6 +1,6 @@
#include <linux/pci.h>
#include <linux/kernel.h>
-#include <arch/hwregs/intr_vect.h>
+#include <hwregs/intr_vect.h>
void pcibios_fixup_bus(struct pci_bus *b)
{
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c b/arch/cris/arch-v32/drivers/sync_serial.c
index e989cee77414..ef515af1a377 100644
--- a/arch/cris/arch-v32/drivers/sync_serial.c
+++ b/arch/cris/arch-v32/drivers/sync_serial.c
@@ -1627,6 +1627,12 @@ static int __init etrax_sync_serial_init(void)
/* Create a sysfs class for syncser */
syncser_class = class_create(THIS_MODULE, "syncser_class");
+ if (IS_ERR(syncser_class)) {
+ pr_err("Failed to create a sysfs class for syncser\n");
+ unregister_chrdev_region(syncser_first, minor_count);
+ cdev_del(syncser_cdev);
+ return -1;
+ }
/* Initialize Ports */
#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 5c84dbb99f30..eb4e0ff36295 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -318,11 +318,13 @@ timer_trig_interrupt(int irq, void *dev_id)
static void timer_trig_handler(struct work_struct *work)
{
- reg_timer_rw_ack_intr ack_intr = { 0 };
- reg_timer_rw_intr_mask intr_mask;
- reg_timer_rw_trig_cfg trig_cfg = { 0 };
- struct fast_timer *t;
- unsigned long flags;
+ reg_timer_rw_ack_intr ack_intr = { 0 };
+ reg_timer_rw_intr_mask intr_mask;
+ reg_timer_rw_trig_cfg trig_cfg = { 0 };
+ struct fast_timer *t;
+ fast_timer_function_type *f;
+ unsigned long d;
+ unsigned long flags;
/* We keep interrupts disabled not only when we modify the
* fast timer list, but any time we hold a reference to a
@@ -350,9 +352,6 @@ static void timer_trig_handler(struct work_struct *work)
fast_timer_running = 0;
fast_timer_ints++;
- fast_timer_function_type *f;
- unsigned long d;
-
t = fast_timer_list;
while (t) {
struct fasttime_t tv;
diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c
index 6de8db67cb09..b07da4b695aa 100644
--- a/arch/cris/arch-v32/kernel/irq.c
+++ b/arch/cris/arch-v32/kernel/irq.c
@@ -471,9 +471,8 @@ init_IRQ(void)
irq_set_default_host(domain);
of_node_put(np);
- for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT; i++, j++) {
+ for (i = FIRST_IRQ, j = 0; j < NBR_INTR_VECT && j < MACH_IRQS; i++, j++)
set_exception_vector(i, interrupt[j]);
- }
/* Mark Timer and IPI IRQs as CPU local */
irq_allocations[TIMER0_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
diff --git a/arch/cris/arch-v32/mach-a3/dma.c b/arch/cris/arch-v32/mach-a3/dma.c
index 47c64bf40eae..11f417f4da98 100644
--- a/arch/cris/arch-v32/mach-a3/dma.c
+++ b/arch/cris/arch-v32/mach-a3/dma.c
@@ -41,7 +41,6 @@ int crisv32_request_dma(unsigned int dmanr, const char *device_id,
if (options & DMA_PANIC_ON_ERROR)
panic("request_dma error!");
- spin_unlock_irqrestore(&dma_lock, flags);
return -EBUSY;
}
clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
diff --git a/arch/cris/arch-v32/mach-a3/dram_init.S b/arch/cris/arch-v32/mach-a3/dram_init.S
index 5c4f24dce94c..7dc26bdb26b5 100644
--- a/arch/cris/arch-v32/mach-a3/dram_init.S
+++ b/arch/cris/arch-v32/mach-a3/dram_init.S
@@ -3,7 +3,7 @@
* This file is intended to be included from other assembler files
*
* Note: This file may not modify r8 or r9 because they are used to
- * carry information from the decompresser to the kernel
+ * carry information from the decompressor to the kernel
*
* Copyright (C) 2005-2007 Axis Communications AB
*
diff --git a/arch/cris/arch-v32/mach-fs/dma.c b/arch/cris/arch-v32/mach-fs/dma.c
index fc6416a671ea..7c93679c02ad 100644
--- a/arch/cris/arch-v32/mach-fs/dma.c
+++ b/arch/cris/arch-v32/mach-fs/dma.c
@@ -43,7 +43,6 @@ int crisv32_request_dma(unsigned int dmanr, const char *device_id,
}
if (options & DMA_PANIC_ON_ERROR)
panic("request_dma error!");
- spin_unlock_irqrestore(&dma_lock, flags);
return -EBUSY;
}
clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
diff --git a/arch/cris/arch-v32/mach-fs/dram_init.S b/arch/cris/arch-v32/mach-fs/dram_init.S
index d3ce2eb04cb1..2ed51e247e8f 100644
--- a/arch/cris/arch-v32/mach-fs/dram_init.S
+++ b/arch/cris/arch-v32/mach-fs/dram_init.S
@@ -3,7 +3,7 @@
* This file is intended to be included from other assembler files
*
* Note: This file may not modify r8 or r9 because they are used to
- * carry information from the decompresser to the kernel
+ * carry information from the decompressor to the kernel
*
* Copyright (C) 2000-2007 Axis Communications AB
*
diff --git a/arch/cris/arch-v32/mm/intmem.c b/arch/cris/arch-v32/mm/intmem.c
index 9ef56092a4c5..c80728401487 100644
--- a/arch/cris/arch-v32/mm/intmem.c
+++ b/arch/cris/arch-v32/mm/intmem.c
@@ -113,14 +113,14 @@ void crisv32_intmem_free(void* addr)
allocation->status = STATUS_FREE;
/* Join with prev and/or next if also free */
- if ((prev != &intmem_allocations) &&
+ if ((&prev->entry != &intmem_allocations) &&
(prev->status == STATUS_FREE)) {
prev->size += allocation->size;
list_del(&allocation->entry);
kfree(allocation);
allocation = prev;
}
- if ((next != &intmem_allocations) &&
+ if ((&next->entry != &intmem_allocations) &&
(next->status == STATUS_FREE)) {
allocation->size += next->size;
list_del(&next->entry);
@@ -145,5 +145,12 @@ unsigned long crisv32_intmem_virt_to_phys(void* addr)
(unsigned long)intmem_virtual + MEM_INTMEM_START +
RESERVED_SIZE);
}
-device_initcall(crisv32_intmem_init);
+
+static int __init crisv32_intmem_setup(void)
+{
+ crisv32_intmem_init();
+
+ return 0;
+}
+device_initcall(crisv32_intmem_setup);
diff --git a/arch/cris/configs/artpec_3_defconfig b/arch/cris/configs/artpec_3_defconfig
index 70e497e0b03e..d31851f29db8 100644
--- a/arch/cris/configs/artpec_3_defconfig
+++ b/arch/cris/configs/artpec_3_defconfig
@@ -25,7 +25,6 @@ CONFIG_MTD_RAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
# CONFIG_INPUT is not set
diff --git a/arch/cris/configs/dev88_defconfig b/arch/cris/configs/dev88_defconfig
new file mode 100644
index 000000000000..beff4ee6edb3
--- /dev/null
+++ b/arch/cris/configs/dev88_defconfig
@@ -0,0 +1,48 @@
+CONFIG_BUILTIN_DTB="dev88"
+# CONFIG_SWAP is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ETRAX_FAST_TIMER=y
+CONFIG_ETRAXFS=y
+CONFIG_ETRAX_DRAM_SIZE=32
+CONFIG_ETRAX_FLASH1_SIZE=4
+CONFIG_ETRAX_MEM_GRP1_CONFIG=0x40688
+CONFIG_ETRAX_MEM_GRP3_CONFIG=0x3
+CONFIG_ETRAX_MEM_GRP4_CONFIG=0x10040
+CONFIG_ETRAX_SDRAM_GRP0_CONFIG=0x958
+CONFIG_ETRAX_SDRAM_TIMING=0x824a
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_ETRAX_ETHERNET=y
+CONFIG_ETRAX_AXISFLASHMAP=y
+CONFIG_DEVTMPFS=y
+CONFIG_MTD_RAM=y
+CONFIG_MTDRAM_TOTAL_SIZE=0
+CONFIG_MTDRAM_ERASE_SIZE=64
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_ETRAXFS=y
+CONFIG_SERIAL_ETRAXFS_CONSOLE=y
+CONFIG_GPIO_ETRAXFS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
diff --git a/arch/cris/configs/etrax-100lx_v2_defconfig b/arch/cris/configs/etrax-100lx_v2_defconfig
index a85aabf92be5..d90ac95c1e44 100644
--- a/arch/cris/configs/etrax-100lx_v2_defconfig
+++ b/arch/cris/configs/etrax-100lx_v2_defconfig
@@ -28,7 +28,6 @@ CONFIG_MTD_RAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
# CONFIG_INPUT is not set
diff --git a/arch/cris/configs/etraxfs_defconfig b/arch/cris/configs/etraxfs_defconfig
index 91232680d6c8..f714e9dfef9b 100644
--- a/arch/cris/configs/etraxfs_defconfig
+++ b/arch/cris/configs/etraxfs_defconfig
@@ -25,7 +25,6 @@ CONFIG_MTD_RAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64
-CONFIG_MTDRAM_ABS_POS=0x0
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
# CONFIG_INPUT is not set
diff --git a/arch/cris/include/arch-v32/arch/cryptocop.h b/arch/cris/include/arch-v32/arch/cryptocop.h
index 716e434e9269..a56ac61a9931 100644
--- a/arch/cris/include/arch-v32/arch/cryptocop.h
+++ b/arch/cris/include/arch-v32/arch/cryptocop.h
@@ -81,7 +81,7 @@ struct cryptocop_tfrm_cfg {
unsigned int flags; /* DECRYPT, ENCRYPT, EXPLICIT_IV */
- /* CBC initialisation vector for cihers. */
+ /* CBC initialisation vector for ciphers. */
u8 iv[CRYPTOCOP_MAX_IV_LENGTH];
/* The position in output where to write the transform output. The order
diff --git a/arch/cris/include/asm/io.h b/arch/cris/include/asm/io.h
index cce8664d5dd6..fe0b2a0ae03b 100644
--- a/arch/cris/include/asm/io.h
+++ b/arch/cris/include/asm/io.h
@@ -8,34 +8,6 @@
#include <asm-generic/iomap.h>
#include <linux/kernel.h>
-struct cris_io_operations
-{
- u32 (*read_mem)(void *addr, int size);
- void (*write_mem)(u32 val, int size, void *addr);
- u32 (*read_io)(u32 port, void *addr, int size, int count);
- void (*write_io)(u32 port, void *addr, int size, int count);
-};
-
-#ifdef CONFIG_PCI
-extern struct cris_io_operations *cris_iops;
-#else
-#define cris_iops ((struct cris_io_operations*)NULL)
-#endif
-
-/*
- * Change virtual addresses to physical addresses and vv.
- */
-
-static inline unsigned long virt_to_phys(volatile void * address)
-{
- return __pa(address);
-}
-
-static inline void * phys_to_virt(unsigned long address)
-{
- return __va(address);
-}
-
extern void __iomem * __ioremap(unsigned long offset, unsigned long size, unsigned long flags);
extern void __iomem * __ioremap_prot(unsigned long phys_addr, unsigned long size, pgprot_t prot);
@@ -48,147 +20,6 @@ extern void iounmap(volatile void * __iomem addr);
extern void __iomem * ioremap_nocache(unsigned long offset, unsigned long size);
-/*
- * IO bus memory addresses are also 1:1 with the physical address
- */
-#define virt_to_bus virt_to_phys
-#define bus_to_virt phys_to_virt
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the CRIS architecture, we just read/write the
- * memory location directly.
- */
-#ifdef CONFIG_PCI
-#define PCI_SPACE(x) ((((unsigned)(x)) & 0x10000000) == 0x10000000)
-#else
-#define PCI_SPACE(x) 0
-#endif
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- return cris_iops->read_mem((void*)addr, 1);
- else
- return *(volatile unsigned char __force *) addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- return cris_iops->read_mem((void*)addr, 2);
- else
- return *(volatile unsigned short __force *) addr;
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- return cris_iops->read_mem((void*)addr, 4);
- else
- return *(volatile unsigned int __force *) addr;
-}
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-static inline void writeb(unsigned char b, volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- cris_iops->write_mem(b, 1, (void*)addr);
- else
- *(volatile unsigned char __force *) addr = b;
-}
-static inline void writew(unsigned short b, volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- cris_iops->write_mem(b, 2, (void*)addr);
- else
- *(volatile unsigned short __force *) addr = b;
-}
-static inline void writel(unsigned int b, volatile void __iomem *addr)
-{
- if (PCI_SPACE(addr) && cris_iops)
- cris_iops->write_mem(b, 4, (void*)addr);
- else
- *(volatile unsigned int __force *) addr = b;
-}
-#define writeb_relaxed(b, addr) writeb(b, addr)
-#define writew_relaxed(b, addr) writew(b, addr)
-#define writel_relaxed(b, addr) writel(b, addr)
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define mmiowb()
-
-#define memset_io(a,b,c) memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c))
-
-
-/* I/O port access. Normally there is no I/O space on CRIS but when
- * Cardbus/PCI is enabled the request is passed through the bridge.
- */
-
-#define IO_SPACE_LIMIT 0xffff
-#define inb(port) (cris_iops ? cris_iops->read_io(port,NULL,1,1) : 0)
-#define inw(port) (cris_iops ? cris_iops->read_io(port,NULL,2,1) : 0)
-#define inl(port) (cris_iops ? cris_iops->read_io(port,NULL,4,1) : 0)
-#define insb(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,1,count) : 0)
-#define insw(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,2,count) : 0)
-#define insl(port,addr,count) (cris_iops ? cris_iops->read_io(port,addr,4,count) : 0)
-static inline void outb(unsigned char data, unsigned int port)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *) &data, 1, 1);
-}
-static inline void outw(unsigned short data, unsigned int port)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *) &data, 2, 1);
-}
-static inline void outl(unsigned int data, unsigned int port)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *) &data, 4, 1);
-}
-static inline void outsb(unsigned int port, const void *addr,
- unsigned long count)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *)addr, 1, count);
-}
-static inline void outsw(unsigned int port, const void *addr,
- unsigned long count)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *)addr, 2, count);
-}
-static inline void outsl(unsigned int port, const void *addr,
- unsigned long count)
-{
- if (cris_iops)
- cris_iops->write_io(port, (void *)addr, 4, count);
-}
-
-#define inb_p(port) inb(port)
-#define inw_p(port) inw(port)
-#define inl_p(port) inl(port)
-#define outb_p(val, port) outb((val), (port))
-#define outw_p(val, port) outw((val), (port))
-#define outl_p(val, port) outl((val), (port))
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
+#include <asm-generic/io.h>
#endif
diff --git a/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h b/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
index 5517f04153a4..c4b6b0e9b1da 100644
--- a/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
+++ b/arch/cris/include/uapi/arch-v10/arch/sv_addr_ag.h
@@ -61,7 +61,7 @@
#define IO_WIDTH(reg, field) IO_WIDTH_ (reg##_, field##_)
#define IO_WIDTH_(reg_, field_) (reg_##_##field_##_WIDTH)
-/*--- Obsolete. Kept for backw compatibility. ---*/
+/*--- Obsolete. Kept for backward compatibility. ---*/
/* Reads (or writes) a byte/uword/udword from the specified mode
register. */
#define IO_RD(reg) (*(volatile u32*)(reg))
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index 112ef26c7f2e..94183d3639ef 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -6,7 +6,7 @@
#include <linux/mm.h>
#include <linux/interrupt.h>
-#include <linux/module.h>
+#include <linux/extable.h>
#include <linux/wait.h>
#include <linux/uaccess.h>
#include <arch/system.h>