summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/filesystems/00-INDEX2
-rw-r--r--Documentation/filesystems/nilfs2.txt202
2 files changed, 204 insertions, 0 deletions
diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX
index 52cd611277a3..8dd6db76171d 100644
--- a/Documentation/filesystems/00-INDEX
+++ b/Documentation/filesystems/00-INDEX
@@ -68,6 +68,8 @@ ncpfs.txt
- info on Novell Netware(tm) filesystem using NCP protocol.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
+nilfs2.txt
+ - info and mount options for the NILFS2 filesystem.
ntfs.txt
- info and mount options for the NTFS filesystem (Windows NT).
ocfs2.txt
diff --git a/Documentation/filesystems/nilfs2.txt b/Documentation/filesystems/nilfs2.txt
new file mode 100644
index 000000000000..3367fc44388d
--- /dev/null
+++ b/Documentation/filesystems/nilfs2.txt
@@ -0,0 +1,202 @@
+NILFS2
+------
+
+NILFS2 is a log-structured file system (LFS) supporting continuous
+snapshotting. In addition to versioning capability of the entire file
+system, users can even restore files mistakenly overwritten or
+destroyed just a few seconds ago. Since NILFS2 can keep consistency
+like conventional LFS, it achieves quick recovery after system
+crashes.
+
+NILFS2 creates a number of checkpoints every few seconds or per
+synchronous write basis (unless there is no change). Users can select
+significant versions among continuously created checkpoints, and can
+change them into snapshots which will be preserved until they are
+changed back to checkpoints.
+
+There is no limit on the number of snapshots until the volume gets
+full. Each snapshot is mountable as a read-only file system
+concurrently with its writable mount, and this feature is convenient
+for online backup.
+
+The userland tools are included in nilfs-utils package, which is
+available from the following download page. At least "mkfs.nilfs2",
+"mount.nilfs2", "umount.nilfs2", and "nilfs_cleanerd" (so called
+cleaner or garbage collector) are required. Details on the tools are
+described in the man pages included in the package.
+
+Project web page: http://www.nilfs.org/en/
+Download page: http://www.nilfs.org/en/download.html
+Git tree web page: http://www.nilfs.org/git/
+NILFS mailing lists: http://www.nilfs.org/mailman/listinfo/users
+
+Caveats
+=======
+
+Features which NILFS2 does not support yet:
+
+ - atime
+ - extended attributes
+ - POSIX ACLs
+ - quotas
+ - writable snapshots
+ - remote backup (CDP)
+ - data integrity
+ - defragmentation
+
+Mount options
+=============
+
+NILFS2 supports the following mount options:
+(*) == default
+
+barrier=on(*) This enables/disables barriers. barrier=off disables
+ it, barrier=on enables it.
+errors=continue(*) Keep going on a filesystem error.
+errors=remount-ro Remount the filesystem read-only on an error.
+errors=panic Panic and halt the machine if an error occurs.
+cp=n Specify the checkpoint-number of the snapshot to be
+ mounted. Checkpoints and snapshots are listed by lscp
+ user command. Only the checkpoints marked as snapshot
+ are mountable with this option. Snapshot is read-only,
+ so a read-only mount option must be specified together.
+order=relaxed(*) Apply relaxed order semantics that allows modified data
+ blocks to be written to disk without making a
+ checkpoint if no metadata update is going. This mode
+ is equivalent to the ordered data mode of the ext3
+ filesystem except for the updates on data blocks still
+ conserve atomicity. This will improve synchronous
+ write performance for overwriting.
+order=strict Apply strict in-order semantics that preserves sequence
+ of all file operations including overwriting of data
+ blocks. That means, it is guaranteed that no
+ overtaking of events occurs in the recovered file
+ system after a crash.
+
+NILFS2 usage
+============
+
+To use nilfs2 as a local file system, simply:
+
+ # mkfs -t nilfs2 /dev/block_device
+ # mount -t nilfs2 /dev/block_device /dir
+
+This will also invoke the cleaner through the mount helper program
+(mount.nilfs2).
+
+Checkpoints and snapshots are managed by the following commands.
+Their manpages are included in the nilfs-utils package above.
+
+ lscp list checkpoints or snapshots.
+ mkcp make a checkpoint or a snapshot.
+ chcp change an existing checkpoint to a snapshot or vice versa.
+ rmcp invalidate specified checkpoint(s).
+
+To mount a snapshot,
+
+ # mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir
+
+where <cno> is the checkpoint number of the snapshot.
+
+To unmount the NILFS2 mount point or snapshot, simply:
+
+ # umount /dir
+
+Then, the cleaner daemon is automatically shut down by the umount
+helper program (umount.nilfs2).
+
+Disk format
+===========
+
+A nilfs2 volume is equally divided into a number of segments except
+for the super block (SB) and segment #0. A segment is the container
+of logs. Each log is composed of summary information blocks, payload
+blocks, and an optional super root block (SR):
+
+ ______________________________________________________
+ | |SB| | Segment | Segment | Segment | ... | Segment | |
+ |_|__|_|____0____|____1____|____2____|_____|____N____|_|
+ 0 +1K +4K +8M +16M +24M +(8MB x N)
+ . . (Typical offsets for 4KB-block)
+ . .
+ .______________________.
+ | log | log |... | log |
+ |__1__|__2__|____|__m__|
+ . .
+ . .
+ . .
+ .______________________________.
+ | Summary | Payload blocks |SR|
+ |_blocks__|_________________|__|
+
+The payload blocks are organized per file, and each file consists of
+data blocks and B-tree node blocks:
+
+ |<--- File-A --->|<--- File-B --->|
+ _______________________________________________________________
+ | Data blocks | B-tree blocks | Data blocks | B-tree blocks | ...
+ _|_____________|_______________|_____________|_______________|_
+
+
+Since only the modified blocks are written in the log, it may have
+files without data blocks or B-tree node blocks.
+
+The organization of the blocks is recorded in the summary information
+blocks, which contains a header structure (nilfs_segment_summary), per
+file structures (nilfs_finfo), and per block structures (nilfs_binfo):
+
+ _________________________________________________________________________
+ | Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |...
+ |_blocks__|___A___|_(A,1)_|_____|(A,Na)_|___B___|_(B,1)_|_____|(B,Nb)_|___
+
+
+The logs include regular files, directory files, symbolic link files
+and several meta data files. The mata data files are the files used
+to maintain file system meta data. The current version of NILFS2 uses
+the following meta data files:
+
+ 1) Inode file (ifile) -- Stores on-disk inodes
+ 2) Checkpoint file (cpfile) -- Stores checkpoints
+ 3) Segment usage file (sufile) -- Stores allocation state of segments
+ 4) Data address translation file -- Maps virtual block numbers to usual
+ (DAT) block numbers. This file serves to
+ make on-disk blocks relocatable.
+ 5) Sketch file (sketch) -- Keeps read-only data which can be
+ associated with checkpoints (optional)
+
+The following figure shows a typical organization of the logs:
+
+ _________________________________________________________________________
+ | Summary | regular file | file | ... | ifile | cpfile | sufile | DAT |SR|
+ |_blocks__|_or_directory_|_______|_____|_______|________|________|_____|__|
+
+
+To stride over segment boundaries, this sequence of files may be split
+into multiple logs. The sequence of logs that should be treated as
+logically one log, is delimited with flags marked in the segment
+summary. The recovery code of nilfs2 looks this boundary information
+to ensure atomicity of updates.
+
+The super root block is inserted for every checkpoints. It includes
+three special inodes, inodes for the DAT, cpfile, and sufile. Inodes
+of regular files, directories, symlinks and other special files, are
+included in the ifile. The inode of ifile itself is included in the
+corresponding checkpoint entry in the cpfile. Thus, the hierarchy
+among NILFS2 files can be depicted as follows:
+
+ Super block (SB)
+ |
+ v
+ Super root block (the latest cno=xx)
+ |-- DAT
+ |-- sufile
+ `-- cpfile
+ |-- ifile (cno=c1)
+ |-- ifile (cno=c2) ---- file (ino=i1)
+ : : |-- file (ino=i2)
+ `-- ifile (cno=xx) |-- file (ino=i3)
+ : :
+ `-- file (ino=yy)
+ ( regular file, directory, or symlink )
+
+For detail on the format of each file, please see include/linux/nilfs2_fs.h.