diff options
| -rw-r--r-- | drivers/mtd/nand/nand_base.c | 41 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 5 |
2 files changed, 46 insertions, 0 deletions
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 0afe76315c38..c4619e3ac4ab 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -48,6 +48,7 @@ #include <linux/leds.h> #include <linux/io.h> #include <linux/mtd/partitions.h> +#include <linux/of_mtd.h> /* Define default oob placement schemes for large and small page devices */ static struct nand_ecclayout nand_oob_8 = { @@ -3795,6 +3796,39 @@ ident_done: return type; } +static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip, + struct device_node *dn) +{ + int ecc_mode, ecc_strength, ecc_step; + + if (of_get_nand_bus_width(dn) == 16) + chip->options |= NAND_BUSWIDTH_16; + + if (of_get_nand_on_flash_bbt(dn)) + chip->bbt_options |= NAND_BBT_USE_FLASH; + + ecc_mode = of_get_nand_ecc_mode(dn); + ecc_strength = of_get_nand_ecc_strength(dn); + ecc_step = of_get_nand_ecc_step_size(dn); + + if ((ecc_step >= 0 && !(ecc_strength >= 0)) || + (!(ecc_step >= 0) && ecc_strength >= 0)) { + pr_err("must set both strength and step size in DT\n"); + return -EINVAL; + } + + if (ecc_mode >= 0) + chip->ecc.mode = ecc_mode; + + if (ecc_strength >= 0) + chip->ecc.strength = ecc_strength; + + if (ecc_step > 0) + chip->ecc.size = ecc_step; + + return 0; +} + /** * nand_scan_ident - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure @@ -3812,6 +3846,13 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, int i, nand_maf_id, nand_dev_id; struct nand_chip *chip = mtd->priv; struct nand_flash_dev *type; + int ret; + + if (chip->dn) { + ret = nand_dt_init(mtd, chip, chip->dn); + if (ret) + return ret; + } /* Set the default functions */ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 6c51876941f3..f25e2bdd188c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -26,6 +26,8 @@ struct mtd_info; struct nand_flash_dev; +struct device_node; + /* Scan and identify a NAND device */ extern int nand_scan(struct mtd_info *mtd, int max_chips); /* @@ -542,6 +544,7 @@ struct nand_buffers { * flash device * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the * flash device. + * @dn: [BOARDSPECIFIC] device node describing this instance * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_byte: [REPLACEABLE] write a single byte to the chip on the @@ -644,6 +647,8 @@ struct nand_chip { void __iomem *IO_ADDR_R; void __iomem *IO_ADDR_W; + struct device_node *dn; + uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); void (*write_byte)(struct mtd_info *mtd, uint8_t byte); |