summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/admin-guide/gpio/gpio-mockup.rst11
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt10
-rw-r--r--Documentation/core-api/irq/irq-domain.rst22
-rw-r--r--Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml77
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-74x164.txt27
-rw-r--r--Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml78
-rw-r--r--Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml82
-rw-r--r--Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt58
-rw-r--r--Documentation/driver-api/gpio/consumer.rst2
-rw-r--r--Documentation/driver-api/gpio/drivers-on-gpio.rst6
-rw-r--r--drivers/gpio/Kconfig24
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-104-dio-48e.c50
-rw-r--r--drivers/gpio/gpio-aggregator.c39
-rw-r--r--drivers/gpio/gpio-ich.c2
-rw-r--r--drivers/gpio/gpio-it87.c8
-rw-r--r--drivers/gpio/gpio-mockup.c9
-rw-r--r--drivers/gpio/gpio-mpc8xxx.c47
-rw-r--r--drivers/gpio/gpio-mxs.c5
-rw-r--r--drivers/gpio/gpio-omap.c5
-rw-r--r--drivers/gpio/gpio-realtek-otto.c325
-rw-r--r--drivers/gpio/gpio-sch.c198
-rw-r--r--drivers/gpio/gpiolib-acpi.c21
-rw-r--r--drivers/gpio/gpiolib-acpi.h4
-rw-r--r--drivers/gpio/gpiolib-of.c6
-rw-r--r--drivers/gpio/gpiolib.c62
-rw-r--r--include/linux/bitmap.h127
-rw-r--r--include/linux/gpio/driver.h12
-rw-r--r--include/linux/irqdomain.h19
-rw-r--r--kernel/irq/irqdomain.c20
-rw-r--r--lib/bitmap.c42
-rw-r--r--lib/cmdline.c1
-rw-r--r--tools/gpio/gpio-utils.c18
33 files changed, 1068 insertions, 350 deletions
diff --git a/Documentation/admin-guide/gpio/gpio-mockup.rst b/Documentation/admin-guide/gpio/gpio-mockup.rst
index 9fa1618b3adc..493071da1738 100644
--- a/Documentation/admin-guide/gpio/gpio-mockup.rst
+++ b/Documentation/admin-guide/gpio/gpio-mockup.rst
@@ -17,17 +17,18 @@ module.
gpio_mockup_ranges
This parameter takes an argument in the form of an array of integer
- pairs. Each pair defines the base GPIO number (if any) and the number
- of lines exposed by the chip. If the base GPIO is -1, the gpiolib
- will assign it automatically.
+ pairs. Each pair defines the base GPIO number (non-negative integer)
+ and the first number after the last of this chip. If the base GPIO
+ is -1, the gpiolib will assign it automatically. while the following
+ parameter is the number of lines exposed by the chip.
- Example: gpio_mockup_ranges=-1,8,-1,16,405,4
+ Example: gpio_mockup_ranges=-1,8,-1,16,405,409
The line above creates three chips. The first one will expose 8 lines,
the second 16 and the third 4. The base GPIO for the third chip is set
to 405 while for two first chips it will be assigned automatically.
- gpio_named_lines
+ gpio_mockup_named_lines
This parameter doesn't take any arguments. It lets the driver know that
GPIO lines exposed by it should be named.
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 02470ba1fe6a..0d48fbd9107f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1469,6 +1469,12 @@
Don't use this when you are not running on the
android emulator
+ gpio-mockup.gpio_mockup_ranges
+ [HW] Sets the ranges of gpiochip of for this device.
+ Format: <start1>,<end1>,<start2>,<end2>...
+ gpio-mockup.gpio_mockup_named_lines
+ [HW] Let the driver know GPIO lines should be named.
+
gpt [EFI] Forces disk with valid GPT signature but
invalid Protective MBR to be treated as GPT. If the
primary GPT is corrupted, it enables the backup/alternate
@@ -1492,10 +1498,6 @@
Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
Default: 1024
- gpio-mockup.gpio_mockup_ranges
- [HW] Sets the ranges of gpiochip of for this device.
- Format: <start1>,<end1>,<start2>,<end2>...
-
hardlockup_all_cpu_backtrace=
[KNL] Should the hard-lockup detector generate
backtraces on all cpus.
diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst
index a77c24c27f7b..8214e215a8bf 100644
--- a/Documentation/core-api/irq/irq-domain.rst
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -42,10 +42,10 @@ irq_domain usage
================
An interrupt controller driver creates and registers an irq_domain by
-calling one of the irq_domain_add_*() functions (each mapping method
-has a different allocator function, more on that later). The function
-will return a pointer to the irq_domain on success. The caller must
-provide the allocator function with an irq_domain_ops structure.
+calling one of the irq_domain_add_*() or irq_domain_create_*() functions
+(each mapping method has a different allocator function, more on that later).
+The function will return a pointer to the irq_domain on success. The caller
+must provide the allocator function with an irq_domain_ops structure.
In most cases, the irq_domain will begin empty without any mappings
between hwirq and IRQ numbers. Mappings are added to the irq_domain
@@ -147,6 +147,7 @@ Legacy
irq_domain_add_simple()
irq_domain_add_legacy()
irq_domain_add_legacy_isa()
+ irq_domain_create_simple()
irq_domain_create_legacy()
The Legacy mapping is a special case for drivers that already have a
@@ -169,13 +170,13 @@ supported. For example, ISA controllers would use the legacy map for
mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
numbers.
-Most users of legacy mappings should use irq_domain_add_simple() which
-will use a legacy domain only if an IRQ range is supplied by the
-system and will otherwise use a linear domain mapping. The semantics
-of this call are such that if an IRQ range is specified then
+Most users of legacy mappings should use irq_domain_add_simple() or
+irq_domain_create_simple() which will use a legacy domain only if an IRQ range
+is supplied by the system and will otherwise use a linear domain mapping.
+The semantics of this call are such that if an IRQ range is specified then
descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which means
-*no* irq descriptors will be allocated.
+specified it will fall through to irq_domain_add_linear() or
+irq_domain_create_linear() which means *no* irq descriptors will be allocated.
A typical use case for simple domains is where an irqchip provider
is supporting both dynamic and static IRQ assignments.
@@ -186,6 +187,7 @@ that the driver using the simple domain call irq_create_mapping()
before any irq_find_mapping() since the latter will actually work
for the static IRQ assignment case.
+irq_domain_add_simple() and irq_domain_create_simple() as well as
irq_domain_add_legacy() and irq_domain_create_legacy() are functionally
equivalent, except for the first argument is different - the former
accepts an Open Firmware specific 'struct device_node', while the latter
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
new file mode 100644
index 000000000000..5fe19fa5f67c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic 8-bit shift register
+
+maintainers:
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - fairchild,74hc595
+ - nxp,74lvc594
+
+ reg:
+ maxItems: 1
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The second cell is only used to specify the GPIO polarity.
+ const: 2
+
+ registers-number:
+ description: Number of daisy-chained shift registers
+
+ enable-gpios:
+ description: GPIO connected to the OE (Output Enable) pin.
+ maxItems: 1
+
+ spi-max-frequency: true
+
+patternProperties:
+ "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+ type: object
+
+ properties:
+ gpio-hog: true
+ gpios: true
+ output-high: true
+ output-low: true
+ line-name: true
+
+ required:
+ - gpio-hog
+ - gpios
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - registers-number
+
+additionalProperties: false
+
+examples:
+ - |
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio5: gpio5@0 {
+ compatible = "fairchild,74hc595";
+ reg = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ registers-number = <4>;
+ spi-max-frequency = <100000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
deleted file mode 100644
index 2a97553d8d76..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-* Generic 8-bits shift register GPIO driver
-
-Required properties:
-- compatible: Should contain one of the following:
- "fairchild,74hc595"
- "nxp,74lvc594"
-- reg : chip select number
-- gpio-controller : Marks the device node as a gpio controller.
-- #gpio-cells : Should be two. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
-- registers-number: Number of daisy-chained shift registers
-
-Optional properties:
-- enable-gpios: GPIO connected to the OE (Output Enable) pin.
-
-Example:
-
-gpio5: gpio5@0 {
- compatible = "fairchild,74hc595";
- reg = <0>;
- gpio-controller;
- #gpio-cells = <2>;
- registers-number = <4>;
- spi-max-frequency = <100000>;
-};
diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
new file mode 100644
index 000000000000..100f20cebd76
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek Otto GPIO controller
+
+maintainers:
+ - Sander Vanheule <sander@svanheule.net>
+ - Bert Vermeulen <bert@biot.com>
+
+description: |
+ Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists
+ of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts.
+ Each bank's interrupts are cascased into one interrupt line on the parent
+ interrupt controller, if provided.
+ This binding allows defining a single bank in the devicetree. The interrupt
+ controller is not supported on the fallback compatible name, which only
+ allows for GPIO port use.
+
+properties:
+ $nodename:
+ pattern: "^gpio@[0-9a-f]+$"
+
+ compatible:
+ items:
+ - enum:
+ - realtek,rtl8380-gpio
+ - realtek,rtl8390-gpio
+ - const: realtek,otto-gpio
+
+ reg:
+ maxItems: 1
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-controller: true
+
+ ngpios:
+ minimum: 1
+ maximum: 32
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - "#gpio-cells"
+ - gpio-controller
+
+additionalProperties: false
+
+dependencies:
+ interrupt-controller: [ interrupts ]
+
+examples:
+ - |
+ gpio@3500 {
+ compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
+ reg = <0x3500 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <24>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&rtlintc>;
+ interrupts = <23>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
new file mode 100644
index 000000000000..d993e002cebe
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip GPIO bank
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+ compatible:
+ enum:
+ - rockchip,gpio-bank
+ - rockchip,rk3188-gpio-bank0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - gpio-controller
+ - "#gpio-cells"
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl: pinctrl {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio@2000a000 {
+ compatible = "rockchip,rk3188-gpio-bank0";
+ reg = <0x2000a000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 9>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio@2003c000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x2003c000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_gates8 10>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index 91fab614c381..84c4111293bd 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -51,23 +51,7 @@ Deprecated properties for iomux controller:
Use rockchip,grf and rockchip,pmu described above instead.
Required properties for gpio sub nodes:
- - compatible: "rockchip,gpio-bank"
- - reg: register of the gpio bank (different than the iomux registerset)
- - interrupts: base interrupt of the gpio bank in the interrupt controller
- - clocks: clock that drives this bank
- - gpio-controller: identifies the node as a gpio controller and pin bank.
- - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See generic
- GPIO binding documentation for description of particular cells.
- - interrupt-controller: identifies the controller node as interrupt-parent.
- - #interrupt-cells: the value of this property should be 2 and the interrupt
- cells should use the standard two-cell scheme described in
- bindings/interrupt-controller/interrupts.txt
-
-Deprecated properties for gpio sub nodes:
- - compatible: "rockchip,rk3188-gpio-bank0"
- - reg: second element: separate pull register for rk3188 bank0, use
- rockchip,pmu described above instead
+See rockchip,gpio-bank.yaml
Required properties for pin configuration node:
- rockchip,pins: 3 integers array, represents a group of pins mux and config
@@ -128,43 +112,3 @@ uart2: serial@20064000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_xfer>;
};
-
-Example for rk3188:
-
- pinctrl@20008000 {
- compatible = "rockchip,rk3188-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmu>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio0: gpio0@2000a000 {
- compatible = "rockchip,rk3188-gpio-bank0";
- reg = <0x2000a000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 9>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio1@2003c000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x2003c000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_gates8 10>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- ...
-
- };
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index 22271c342d92..3366a991b4aa 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -12,7 +12,7 @@ Guidelines for GPIOs consumers
Drivers that can't work without standard GPIO calls should have Kconfig entries
that depend on GPIOLIB or select GPIOLIB. The functions that allow a driver to
-obtain and use GPIOs are available by including the following file:
+obtain and use GPIOs are available by including the following file::
#include <linux/gpio/consumer.h>
diff --git a/Documentation/driver-api/gpio/drivers-on-gpio.rst b/Documentation/driver-api/gpio/drivers-on-gpio.rst
index 41ec3cc72d32..af632d764ac6 100644
--- a/Documentation/driver-api/gpio/drivers-on-gpio.rst
+++ b/Documentation/driver-api/gpio/drivers-on-gpio.rst
@@ -96,6 +96,12 @@ hardware descriptions such as device tree or ACPI:
way to pass the charging parameters from hardware descriptions such as the
device tree.
+- gpio-mux: drivers/mux/gpio.c is used for controlling a multiplexer using
+ n GPIO lines such that you can mux in 2^n different devices by activating
+ different GPIO lines. Often the GPIOs are on a SoC and the devices are
+ some SoC-external entities, such as different components on a PCB that
+ can be selectively enabled.
+
Apart from this there are special GPIO drivers in subsystems like MMC/SD to
read card detect and write protect GPIO lines, and in the TTY serial subsystem
to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d3b3de514f6e..1dd0ec6727fd 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -321,9 +321,8 @@ config GPIO_HLWD
config GPIO_ICH
tristate "Intel ICH GPIO"
- depends on PCI && X86
- select MFD_CORE
- select LPC_ICH
+ depends on X86
+ depends on LPC_ICH
help
Say yes here to support the GPIO functionality of a number of Intel
ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
@@ -502,6 +501,19 @@ config GPIO_RDA
help
Say Y here to support RDA Micro GPIO controller.
+config GPIO_REALTEK_OTTO
+ tristate "Realtek Otto GPIO support"
+ depends on MACH_REALTEK_RTL
+ default MACH_REALTEK_RTL
+ select GPIO_GENERIC
+ select GPIOLIB_IRQCHIP
+ help
+ The GPIO controller on the Otto MIPS platform supports up to two
+ banks of 32 GPIOs, with edge triggered interrupts. The 32 GPIOs
+ are grouped in four 8-bit wide ports.
+
+ When built as a module, the module will be called realtek_otto_gpio.
+
config GPIO_REG
bool
help
@@ -847,9 +859,9 @@ config GPIO_IT87
config GPIO_SCH
tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
- depends on (X86 || COMPILE_TEST) && PCI
- select MFD_CORE
- select LPC_SCH
+ depends on (X86 || COMPILE_TEST) && ACPI
+ depends on LPC_SCH
+ select GPIOLIB_IRQCHIP
help
Say yes here to support GPIO interface on Intel Poulsbo SCH,
Intel Tunnel Creek processor, Intel Centerton processor or
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4c12f31db31f..d7c81e1611a4 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -125,6 +125,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
+obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
diff --git a/drivers/gpio/gpio-104-dio-48e.c b/drivers/gpio/gpio-104-dio-48e.c
index 7a9021c4fa48..71c0bea34d7b 100644
--- a/drivers/gpio/gpio-104-dio-48e.c
+++ b/drivers/gpio/gpio-104-dio-48e.c
@@ -49,15 +49,15 @@ struct dio48e_gpio {
unsigned char out_state[6];
unsigned char control[2];
raw_spinlock_t lock;
- unsigned base;
+ unsigned int base;
unsigned char irq_mask;
};
-static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- const unsigned port = offset / 8;
- const unsigned mask = BIT(offset % 8);
+ const unsigned int port = offset / 8;
+ const unsigned int mask = BIT(offset % 8);
if (dio48egpio->io_state[port] & mask)
return GPIO_LINE_DIRECTION_IN;
@@ -65,14 +65,14 @@ static int dio48e_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
return GPIO_LINE_DIRECTION_OUT;
}
-static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- const unsigned io_port = offset / 8;
+ const unsigned int io_port = offset / 8;
const unsigned int control_port = io_port / 3;
- const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
+ const unsigned int control_addr = dio48egpio->base + 3 + control_port * 4;
unsigned long flags;
- unsigned control;
+ unsigned int control;
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
@@ -104,17 +104,17 @@ static int dio48e_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
return 0;
}
-static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
- int value)
+static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
+ int value)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- const unsigned io_port = offset / 8;
+ const unsigned int io_port = offset / 8;
const unsigned int control_port = io_port / 3;
- const unsigned mask = BIT(offset % 8);
- const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
- const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
+ const unsigned int mask = BIT(offset % 8);
+ const unsigned int control_addr = dio48egpio->base + 3 + control_port * 4;
+ const unsigned int out_port = (io_port > 2) ? io_port + 1 : io_port;
unsigned long flags;
- unsigned control;
+ unsigned int control;
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
@@ -154,14 +154,14 @@ static int dio48e_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
return 0;
}
-static int dio48e_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int dio48e_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- const unsigned port = offset / 8;
- const unsigned mask = BIT(offset % 8);
- const unsigned in_port = (port > 2) ? port + 1 : port;
+ const unsigned int port = offset / 8;
+ const unsigned int mask = BIT(offset % 8);
+ const unsigned int in_port = (port > 2) ? port + 1 : port;
unsigned long flags;
- unsigned port_state;
+ unsigned int port_state;
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
@@ -202,12 +202,12 @@ static int dio48e_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
return 0;
}
-static void dio48e_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static void dio48e_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
- const unsigned port = offset / 8;
- const unsigned mask = BIT(offset % 8);
- const unsigned out_port = (port > 2) ? port + 1 : port;
+ const unsigned int port = offset / 8;
+ const unsigned int mask = BIT(offset % 8);
+ const unsigned int out_port = (port > 2) ? port + 1 : port;
unsigned long flags;
raw_spin_lock_irqsave(&dio48egpio->lock, flags);
@@ -306,7 +306,7 @@ static void dio48e_irq_unmask(struct irq_data *data)
raw_spin_unlock_irqrestore(&dio48egpio->lock, flags);
}
-static int dio48e_irq_set_type(struct irq_data *data, unsigned flow_type)
+static int dio48e_irq_set_type(struct irq_data *data, unsigned int flow_type)
{
const unsigned long offset = irqd_to_hwirq(data);
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
index 08171431bb8f..34e35b64dcdc 100644
--- a/drivers/gpio/gpio-aggregator.c
+++ b/drivers/gpio/gpio-aggregator.c
@@ -37,31 +37,6 @@ struct gpio_aggregator {
static DEFINE_MUTEX(gpio_aggregator_lock); /* protects idr */
static DEFINE_IDR(gpio_aggregator_idr);
-static char *get_arg(char **args)
-{
- char *start, *end;
-
- start = skip_spaces(*args);
- if (!*start)
- return NULL;
-
- if (*start == '"') {
- /* Quoted arg */
- end = strchr(++start, '"');
- if (!end)
- return ERR_PTR(-EINVAL);
- } else {
- /* Unquoted arg */
- for (end = start; *end && !isspace(*end); end++) ;
- }
-
- if (*end)
- *end++ = '\0';
-
- *args = end;
- return start;
-}
-
static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
int hwnum, unsigned int *n)
{
@@ -83,8 +58,8 @@ static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *key,
static int aggr_parse(struct gpio_aggregator *aggr)
{
+ char *args = skip_spaces(aggr->args);
char *name, *offsets, *p;
- char *args = aggr->args;
unsigned long *bitmap;
unsigned int i, n = 0;
int error = 0;
@@ -93,13 +68,9 @@ static int aggr_parse(struct gpio_aggregator *aggr)
if (!bitmap)
return -ENOMEM;
- for (name = get_arg(&args), offsets = get_arg(&args); name;
- offsets = get_arg(&args)) {
- if (IS_ERR(name)) {
- pr_err("Cannot get GPIO specifier: %pe\n", name);
- error = PTR_ERR(name);
- goto free_bitmap;
- }
+ args = next_arg(args, &name, &p);
+ while (*args) {
+ args = next_arg(args, &offsets, &p);
p = get_options(offsets, 0, &error);
if (error == 0 || *p) {
@@ -125,7 +96,7 @@ static int aggr_parse(struct gpio_aggregator *aggr)
goto free_bitmap;
}
- name = get_arg(&args);
+ args = next_arg(args, &name, &p);
}
if (!n) {
diff --git a/drivers/gpio/gpio-ich.c b/drivers/gpio/gpio-ich.c
index de56c013a658..3b31f5e9bf40 100644
--- a/drivers/gpio/gpio-ich.c
+++ b/drivers/gpio/gpio-ich.c
@@ -5,13 +5,11 @@
* Copyright (C) 2010 Extreme Engineering Solutions.
*/
-
#include <linux/bitops.h>
#include <linux/gpio/driver.h>
#include <linux/ioport.h>
#include <linux/mfd/lpc_ich.h>
#include <linux/module.h>
-#include <linux/pci.h>
#include <linux/platform_device.h>
#define DRV_NAME "gpio_ich"
diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c
index 8f1be34953ce..f332341fd4c8 100644
--- a/drivers/gpio/gpio-it87.c
+++ b/drivers/gpio/gpio-it87.c
@@ -125,14 +125,6 @@ static inline int superio_inw(int reg)
return val;
}
-static inline void superio_outw(int val, int reg)
-{
- outb(reg++, REG);
- outb(val >> 8, VAL);
- outb(reg, REG);
- outb(val, VAL);
-}
-
static inline void superio_set_mask(int mask, int reg)
{
u8 curr_val = superio_inb(reg);
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 28b757d34046..d7e73876a3b9 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -479,15 +479,10 @@ static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC];
static void gpio_mockup_unregister_pdevs(void)
{
- struct platform_device *pdev;
int i;
- for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) {
- pdev = gpio_mockup_pdevs[i];
-
- if (pdev)
- platform_device_unregister(pdev);
- }
+ for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++)
+ platform_device_unregister(gpio_mockup_pdevs[i]);
}
static __init char **gpio_mockup_make_line_names(const char *label,
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 6dfca83bcd90..4b9157a69fca 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -9,6 +9,7 @@
* kind, whether express or implied.
*/
+#include <linux/acpi.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
@@ -18,6 +19,8 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/property.h>
+#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/gpio/driver.h>
@@ -303,8 +306,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
struct device_node *np = pdev->dev.of_node;
struct mpc8xxx_gpio_chip *mpc8xxx_gc;
struct gpio_chip *gc;
- const struct mpc8xxx_gpio_devtype *devtype =
- of_device_get_match_data(&pdev->dev);
+ const struct mpc8xxx_gpio_devtype *devtype = NULL;
+ struct fwnode_handle *fwnode;
int ret;
mpc8xxx_gc = devm_kzalloc(&pdev->dev, sizeof(*mpc8xxx_gc), GFP_KERNEL);
@@ -315,14 +318,14 @@ static int mpc8xxx_probe(struct platform_device *pdev)
raw_spin_lock_init(&mpc8xxx_gc->lock);
- mpc8xxx_gc->regs = of_iomap(np, 0);
- if (!mpc8xxx_gc->regs)
- return -ENOMEM;
+ mpc8xxx_gc->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(mpc8xxx_gc->regs))
+ return PTR_ERR(mpc8xxx_gc->regs);
gc = &mpc8xxx_gc->gc;
gc->parent = &pdev->dev;
- if (of_property_read_bool(np, "little-endian")) {
+ if (device_property_read_bool(&pdev->dev, "little-endian")) {
ret = bgpio_init(gc, &pdev->dev, 4,
mpc8xxx_gc->regs + GPIO_DAT,
NULL, NULL,
@@ -345,6 +348,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
mpc8xxx_gc->direction_output = gc->direction_output;
+ devtype = device_get_match_data(&pdev->dev);
if (!devtype)
devtype = &mpc8xxx_gpio_devtype_default;
@@ -369,24 +373,29 @@ static int mpc8xxx_probe(struct platform_device *pdev)
* associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate
* the port value to the GPIO Data Register.
*/
+ fwnode = dev_fwnode(&pdev->dev);
if (of_device_is_compatible(np, "fsl,qoriq-gpio") ||
of_device_is_compatible(np, "fsl,ls1028a-gpio") ||
- of_device_is_compatible(np, "fsl,ls1088a-gpio"))
+ of_device_is_compatible(np, "fsl,ls1088a-gpio") ||
+ is_acpi_node(fwnode))
gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff);
ret = gpiochip_add_data(gc, mpc8xxx_gc);
if (ret) {
- pr_err("%pOF: GPIO chip registration failed with status %d\n",
- np, ret);
+ dev_err(&pdev->dev,
+ "GPIO chip registration failed with status %d\n", ret);
goto err;
}
- mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0);
+ mpc8xxx_gc->irqn = platform_get_irq(pdev, 0);
if (!mpc8xxx_gc->irqn)
return 0;
- mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
- &mpc8xxx_gpio_irq_ops, mpc8xxx_gc);
+ mpc8xxx_gc->irq = irq_domain_create_linear(fwnode,
+ MPC8XXX_GPIO_PINS,
+ &mpc8xxx_gpio_irq_ops,
+ mpc8xxx_gc);
+
if (!mpc8xxx_gc->irq)
return 0;
@@ -399,8 +408,9 @@ static int mpc8xxx_probe(struct platform_device *pdev)
IRQF_SHARED, "gpio-cascade",
mpc8xxx_gc);
if (ret) {
- dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n",
- np->full_name, mpc8xxx_gc->irqn, ret);
+ dev_err(&pdev->dev,
+ "failed to devm_request_irq(%d), ret = %d\n",
+ mpc8xxx_gc->irqn, ret);
goto err;
}
@@ -425,12 +435,21 @@ static int mpc8xxx_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id gpio_acpi_ids[] = {
+ {"NXP0031",},
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, gpio_acpi_ids);
+#endif
+
static struct platform_driver mpc8xxx_plat_driver = {
.probe = mpc8xxx_probe,
.remove = mpc8xxx_remove,
.driver = {
.name = "gpio-mpc8xxx",
.of_match_table = mpc8xxx_gpio_ids,
+ .acpi_match_table = ACPI_PTR(gpio_acpi_ids),
},
};
diff --git a/drivers/gpio/gpio-mxs.c b/drivers/gpio/gpio-mxs.c
index dfc0c1eb1b33..524b668eb1ac 100644
--- a/drivers/gpio/gpio-mxs.c
+++ b/drivers/gpio/gpio-mxs.c
@@ -60,11 +60,6 @@ static inline int is_imx23_gpio(struct mxs_gpio_port *port)
return port->devid == IMX23_GPIO;
}
-static inline int is_imx28_gpio(struct mxs_gpio_port *port)
-{
- return port->devid == IMX28_GPIO;
-}
-
/* Note: This driver assumes 32 GPIOs are handled in one register */
static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 56152263ab38..ca23f72165ca 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1373,15 +1373,14 @@ static int omap_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
- const struct of_device_id *match;
const struct omap_gpio_platform_data *pdata;
struct gpio_bank *bank;
struct irq_chip *irqc;
int ret;
- match = of_match_device(of_match_ptr(omap_gpio_match), dev);
+ pdata = device_get_match_data(dev);
- pdata = match ? match->data : dev_get_platdata(dev);
+ pdata = pdata ?: dev_get_platdata(dev);
if (!pdata)
return -EINVAL;
diff --git a/drivers/gpio/gpio-realtek-otto.c b/drivers/gpio/gpio-realtek-otto.c
new file mode 100644
index 000000000000..cb64fb5a51aa
--- /dev/null
+++ b/drivers/gpio/gpio-realtek-otto.c
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/gpio/driver.h>
+#include <linux/irq.h>
+#include <linux/minmax.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+/*
+ * Total register block size is 0x1C for one bank of four ports (A, B, C, D).
+ * An optional second bank, with ports E, F, G, and H, may be present, starting
+ * at register offset 0x1C.
+ */
+
+/*
+ * Pin select: (0) "normal", (1) "dedicate peripheral"
+ * Not used on RTL8380/RTL8390, peripheral selection is managed by control bits
+ * in the peripheral registers.
+ */
+#define REALTEK_GPIO_REG_CNR 0x00
+/* Clear bit (0) for input, set bit (1) for output */
+#define REALTEK_GPIO_REG_DIR 0x08
+#define REALTEK_GPIO_REG_DATA 0x0C
+/* Read bit for IRQ status, write 1 to clear IRQ */
+#define REALTEK_GPIO_REG_ISR 0x10
+/* Two bits per GPIO in IMR registers */
+#define REALTEK_GPIO_REG_IMR 0x14
+#define REALTEK_GPIO_REG_IMR_AB 0x14
+#define REALTEK_GPIO_REG_IMR_CD 0x18
+#define REALTEK_GPIO_IMR_LINE_MASK GENMASK(1, 0)
+#define REALTEK_GPIO_IRQ_EDGE_FALLING 1
+#define REALTEK_GPIO_IRQ_EDGE_RISING 2
+#define REALTEK_GPIO_IRQ_EDGE_BOTH 3
+
+#define REALTEK_GPIO_MAX 32
+#define REALTEK_GPIO_PORTS_PER_BANK 4
+
+/**
+ * realtek_gpio_ctrl - Realtek Otto GPIO driver data
+ *
+ * @gc: Associated gpio_chip instance
+ * @base: Base address of the register block for a GPIO bank
+ * @lock: Lock for accessing the IRQ registers and values
+ * @intr_mask: Mask for interrupts lines
+ * @intr_type: Interrupt type selection
+ *
+ * Because the interrupt mask register (IMR) combines the function of IRQ type
+ * selection and masking, two extra values are stored. @intr_mask is used to
+ * mask/unmask the interrupts for a GPIO port, and @intr_type is used to store
+ * the selected interrupt types. The logical AND of these values is written to
+ * IMR on changes.
+ */
+struct realtek_gpio_ctrl {
+ struct gpio_chip gc;
+ void __iomem *base;
+ raw_spinlock_t lock;
+ u16 intr_mask[REALTEK_GPIO_PORTS_PER_BANK];
+ u16 intr_type[REALTEK_GPIO_PORTS_PER_BANK];
+};
+
+/* Expand with more flags as devices with other quirks are added */
+enum realtek_gpio_flags {
+ /*
+ * Allow disabling interrupts, for cases where the port order is
+ * unknown. This may result in a port mismatch between ISR and IMR.
+ * An interrupt would appear to come from a different line than the
+ * line the IRQ handler was assigned to, causing uncaught interrupts.
+ */
+ GPIO_INTERRUPTS_DISABLED = BIT(0),
+};
+
+static struct realtek_gpio_ctrl *irq_data_to_ctrl(struct irq_data *data)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+
+ return container_of(gc, struct realtek_gpio_ctrl, gc);
+}
+
+/*
+ * Normal port order register access
+ *
+ * Port information is stored with the first port at offset 0, followed by the
+ * second, etc. Most registers store one bit per GPIO and use a u8 value per
+ * port. The two interrupt mask registers store two bits per GPIO, so use u16
+ * values.
+ */
+static void realtek_gpio_write_imr(struct realtek_gpio_ctrl *ctrl,
+ unsigned int port, u16 irq_type, u16 irq_mask)
+{
+ iowrite16(irq_type & irq_mask, ctrl->base + REALTEK_GPIO_REG_IMR + 2 * port);
+}
+
+static void realtek_gpio_clear_isr(struct realtek_gpio_ctrl *ctrl,
+ unsigned int port, u8 mask)
+{
+ iowrite8(mask, ctrl->base + REALTEK_GPIO_REG_ISR + port);
+}
+
+static u8 realtek_gpio_read_isr(struct realtek_gpio_ctrl *ctrl, unsigned int port)
+{
+ return ioread8(ctrl->base + REALTEK_GPIO_REG_ISR + port);
+}
+
+/* Set the rising and falling edge mask bits for a GPIO port pin */
+static u16 realtek_gpio_imr_bits(unsigned int pin, u16 value)
+{
+ return (value & REALTEK_GPIO_IMR_LINE_MASK) << 2 * pin;
+}
+
+static void realtek_gpio_irq_ack(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ irq_hw_number_t line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+
+ realtek_gpio_clear_isr(ctrl, port, BIT(port_pin));
+}
+
+static void realtek_gpio_irq_unmask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ m = ctrl->intr_mask[port];
+ m |= realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ ctrl->intr_mask[port] = m;
+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static void realtek_gpio_irq_mask(struct irq_data *data)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 m;
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ m = ctrl->intr_mask[port];
+ m &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ ctrl->intr_mask[port] = m;
+ realtek_gpio_write_imr(ctrl, port, ctrl->intr_type[port], m);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+}
+
+static int realtek_gpio_irq_set_type(struct irq_data *data, unsigned int flow_type)
+{
+ struct realtek_gpio_ctrl *ctrl = irq_data_to_ctrl(data);
+ unsigned int line = irqd_to_hwirq(data);
+ unsigned int port = line / 8;
+ unsigned int port_pin = line % 8;
+ unsigned long flags;
+ u16 type, t;
+
+ switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_FALLING:
+ type = REALTEK_GPIO_IRQ_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ type = REALTEK_GPIO_IRQ_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ type = REALTEK_GPIO_IRQ_EDGE_BOTH;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ irq_set_handler_locked(data, handle_edge_irq);
+
+ raw_spin_lock_irqsave(&ctrl->lock, flags);
+ t = ctrl->intr_type[port];
+ t &= ~realtek_gpio_imr_bits(port_pin, REALTEK_GPIO_IMR_LINE_MASK);
+ t |= realtek_gpio_imr_bits(port_pin, type);
+ ctrl->intr_type[port] = t;
+ realtek_gpio_write_imr(ctrl, port, t, ctrl->intr_mask[port]);
+ raw_spin_unlock_irqrestore(&ctrl->lock, flags);
+
+ return 0;
+}
+
+static void realtek_gpio_irq_handler(struct irq_desc *desc)
+{
+ struct gpio_chip *gc = irq_desc_get_handler_data(desc);
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ struct irq_chip *irq_chip = irq_desc_get_chip(desc);
+ unsigned int lines_done;
+ unsigned int port_pin_count;
+ unsigned int irq;
+ unsigned long status;
+ int offset;
+
+ chained_irq_enter(irq_chip, desc);
+
+ for (lines_done = 0; lines_done < gc->ngpio; lines_done += 8) {
+ status = realtek_gpio_read_isr(ctrl, lines_done / 8);
+ port_pin_count = min(gc->ngpio - lines_done, 8U);
+ for_each_set_bit(offset, &status, port_pin_count) {
+ irq = irq_find_mapping(gc->irq.domain, offset);
+ generic_handle_irq(irq);
+ }
+ }
+
+ chained_irq_exit(irq_chip, desc);
+}
+
+static int realtek_gpio_irq_init(struct gpio_chip *gc)
+{
+ struct realtek_gpio_ctrl *ctrl = gpiochip_get_data(gc);
+ unsigned int port;
+
+ for (port = 0; (port * 8) < gc->ngpio; port++) {
+ realtek_gpio_write_imr(ctrl, port, 0, 0);
+ realtek_gpio_clear_isr(ctrl, port, GENMASK(7, 0));
+ }
+
+ return 0;
+}
+
+static struct irq_chip realtek_gpio_irq_chip = {
+ .name = "realtek-otto-gpio",
+ .irq_ack = realtek_gpio_irq_ack,
+ .irq_mask = realtek_gpio_irq_mask,
+ .irq_unmask = realtek_gpio_irq_unmask,
+ .irq_set_type = realtek_gpio_irq_set_type,
+};
+
+static const struct of_device_id realtek_gpio_of_match[] = {
+ {
+ .compatible = "realtek,otto-gpio",
+ .data = (void *)GPIO_INTERRUPTS_DISABLED,
+ },
+ {
+ .compatible = "realtek,rtl8380-gpio",
+ },
+ {
+ .compatible = "realtek,rtl8390-gpio",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, realtek_gpio_of_match);
+
+static int realtek_gpio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ unsigned int dev_flags;
+ struct gpio_irq_chip *girq;
+ struct realtek_gpio_ctrl *ctrl;
+ u32 ngpios;
+ int err, irq;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ dev_flags = (unsigned int) device_get_match_data(dev);
+
+ ngpios = REALTEK_GPIO_MAX;
+ device_property_read_u32(dev, "ngpios", &ngpios);
+
+ if (ngpios > REALTEK_GPIO_MAX) {
+ dev_err(&pdev->dev, "invalid ngpios (max. %d)\n",
+ REALTEK_GPIO_MAX);
+ return -EINVAL;
+ }
+
+ ctrl->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ctrl->base))
+ return PTR_ERR(ctrl->base);
+
+ raw_spin_lock_init(&ctrl->lock);
+
+ err = bgpio_init(&ctrl->gc, dev, 4,
+ ctrl->base + REALTEK_GPIO_REG_DATA, NULL, NULL,
+ ctrl->base + REALTEK_GPIO_REG_DIR, NULL,
+ BGPIOF_BIG_ENDIAN_BYTE_ORDER);
+ if (err) {
+ dev_err(dev, "unable to init generic GPIO");
+ return err;
+ }
+
+ ctrl->gc.ngpio = ngpios;
+ ctrl->gc.owner = THIS_MODULE;
+
+ irq = platform_get_irq_optional(pdev, 0);
+ if (!(dev_flags & GPIO_INTERRUPTS_DISABLED) && irq > 0) {
+ girq = &ctrl->gc.irq;
+ girq->chip = &realtek_gpio_irq_chip;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+ girq->parent_handler = realtek_gpio_irq_handler;
+ girq->num_parents = 1;
+ girq->parents = devm_kcalloc(dev, girq->num_parents,
+ sizeof(*girq->parents), GFP_KERNEL);
+ if (!girq->parents)
+ return -ENOMEM;
+ girq->parents[0] = irq;
+ girq->init_hw = realtek_gpio_irq_init;
+ }
+
+ return devm_gpiochip_add_data(dev, &ctrl->gc, ctrl);
+}
+
+static struct platform_driver realtek_gpio_driver = {
+ .driver = {
+ .name = "realtek-otto-gpio",
+ .of_match_table = realtek_gpio_of_match,
+ },
+ .probe = realtek_gpio_probe,
+};
+module_platform_driver(realtek_gpio_driver);
+
+MODULE_DESCRIPTION("Realtek Otto GPIO support");
+MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 3a1b1adb08c6..a6f0421d6e50 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -7,33 +7,55 @@
*/
#include <linux/acpi.h>
+#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci_ids.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
#define GEN 0x00
#define GIO 0x04
#define GLV 0x08
+#define GTPE 0x0c
+#define GTNE 0x10
+#define GGPE 0x14
+#define GSMI 0x18
+#define GTS 0x1c
+
+#define CORE_BANK_OFFSET 0x00
+#define RESUME_BANK_OFFSET 0x20
+
+/*
+ * iLB datasheet describes GPE0BLK registers, in particular GPE0E.GPIO bit.
+ * Document Number: 328195-001
+ */
+#define GPE0E_GPIO 14
struct sch_gpio {
struct gpio_chip chip;
+ struct irq_chip irqchip;
spinlock_t lock;
unsigned short iobase;
unsigned short resume_base;
+
+ /* GPE handling */
+ u32 gpe;
+ acpi_gpe_handler gpe_handler;
};
static unsigned int sch_gpio_offset(struct sch_gpio *sch, unsigned int gpio,
unsigned int reg)
{
- unsigned int base = 0;
+ unsigned int base = CORE_BANK_OFFSET;
if (gpio >= sch->resume_base) {
gpio -= sch->resume_base;
- base += 0x20;
+ base = RESUME_BANK_OFFSET;
}
return base + reg + gpio / 8;
@@ -79,10 +101,11 @@ static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned int gpio, unsigned i
static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
+ unsigned long flags;
- spin_lock(&sch->lock);
+ spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 1);
- spin_unlock(&sch->lock);
+ spin_unlock_irqrestore(&sch->lock, flags);
return 0;
}
@@ -96,20 +119,22 @@ static int sch_gpio_get(struct gpio_chip *gc, unsigned int gpio_num)
static void sch_gpio_set(struct gpio_chip *gc, unsigned int gpio_num, int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
+ unsigned long flags;
- spin_lock(&sch->lock);
+ spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GLV, val);
- spin_unlock(&sch->lock);
+ spin_unlock_irqrestore(&sch->lock, flags);
}
static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num,
int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
+ unsigned long flags;
- spin_lock(&sch->lock);
+ spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 0);
- spin_unlock(&sch->lock);
+ spin_unlock_irqrestore(&sch->lock, flags);
/*
* according to the datasheet, writing to the level register has no
@@ -144,10 +169,145 @@ static const struct gpio_chip sch_gpio_chip = {
.get_direction = sch_gpio_get_direction,
};
+static int sch_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct sch_gpio *sch = gpiochip_get_data(gc);
+ irq_hw_number_t gpio_num = irqd_to_hwirq(d);
+ unsigned long flags;
+ int rising, falling;
+
+ switch (type & IRQ_TYPE_SENSE_MASK) {
+ case IRQ_TYPE_EDGE_RISING:
+ rising = 1;
+ falling = 0;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ rising = 0;
+ falling = 1;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ rising = 1;
+ falling = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&sch->lock, flags);
+
+ sch_gpio_reg_set(sch, gpio_num, GTPE, rising);
+ sch_gpio_reg_set(sch, gpio_num, GTNE, falling);
+
+ irq_set_handler_locked(d, handle_edge_irq);
+
+ spin_unlock_irqrestore(&sch->lock, flags);
+
+ return 0;
+}
+
+static void sch_irq_ack(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct sch_gpio *sch = gpiochip_get_data(gc);
+ irq_hw_number_t gpio_num = irqd_to_hwirq(d);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sch->lock, flags);
+ sch_gpio_reg_set(sch, gpio_num, GTS, 1);
+ spin_unlock_irqrestore(&sch->lock, flags);
+}
+
+static void sch_irq_mask_unmask(struct irq_data *d, int val)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct sch_gpio *sch = gpiochip_get_data(gc);
+ irq_hw_number_t gpio_num = irqd_to_hwirq(d);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sch->lock, flags);
+ sch_gpio_reg_set(sch, gpio_num, GGPE, val);
+ spin_unlock_irqrestore(&sch->lock, flags);
+}
+
+static void sch_irq_mask(struct irq_data *d)
+{
+ sch_irq_mask_unmask(d, 0);
+}
+
+static void sch_irq_unmask(struct irq_data *d)
+{
+ sch_irq_mask_unmask(d, 1);
+}
+
+static u32 sch_gpio_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context)
+{
+ struct sch_gpio *sch = context;
+ struct gpio_chip *gc = &sch->chip;
+ unsigned long core_status, resume_status;
+ unsigned long pending;
+ unsigned long flags;
+ int offset;
+ u32 ret;
+
+ spin_lock_irqsave(&sch->lock, flags);
+
+ core_status = inl(sch->iobase + CORE_BANK_OFFSET + GTS);
+ resume_status = inl(sch->iobase + RESUME_BANK_OFFSET + GTS);
+
+ spin_unlock_irqrestore(&sch->lock, flags);
+
+ pending = (resume_status << sch->resume_base) | core_status;
+ for_each_set_bit(offset, &pending, sch->chip.ngpio)
+ generic_handle_irq(irq_find_mapping(gc->irq.domain, offset));
+
+ /* Set returning value depending on whether we handled an interrupt */
+ ret = pending ? ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
+
+ /* Acknowledge GPE to ACPICA */
+ ret |= ACPI_REENABLE_GPE;
+
+ return ret;
+}
+
+static void sch_gpio_remove_gpe_handler(void *data)
+{
+ struct sch_gpio *sch = data;
+
+ acpi_disable_gpe(NULL, sch->gpe);
+ acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
+}
+
+static int sch_gpio_install_gpe_handler(struct sch_gpio *sch)
+{
+ struct device *dev = sch->chip.parent;
+ acpi_status status;
+
+ status = acpi_install_gpe_handler(NULL, sch->gpe, ACPI_GPE_LEVEL_TRIGGERED,
+ sch->gpe_handler, sch);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Failed to install GPE handler for %u: %s\n",
+ sch->gpe, acpi_format_exception(status));
+ return -ENODEV;
+ }
+
+ status = acpi_enable_gpe(NULL, sch->gpe);
+ if (ACPI_FAILURE(status)) {
+ dev_err(dev, "Failed to enable GPE handler for %u: %s\n",
+ sch->gpe, acpi_format_exception(status));
+ acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
+ return -ENODEV;
+ }
+
+ return devm_add_action_or_reset(dev, sch_gpio_remove_gpe_handler, sch);
+}
+
static int sch_gpio_probe(struct platform_device *pdev)
{
+ struct gpio_irq_chip *girq;
struct sch_gpio *sch;
struct resource *res;
+ int ret;
sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
if (!sch)
@@ -207,6 +367,28 @@ static int sch_gpio_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, sch);
+ sch->irqchip.name = "sch_gpio";
+ sch->irqchip.irq_ack = sch_irq_ack;
+ sch->irqchip.irq_mask = sch_irq_mask;
+ sch->irqchip.irq_unmask = sch_irq_unmask;
+ sch->irqchip.irq_set_type = sch_irq_type;
+
+ girq = &sch->chip.irq;
+ girq->chip = &sch->irqchip;
+ girq->num_parents = 0;
+ girq->parents = NULL;
+ girq->parent_handler = NULL;
+ girq->default_type = IRQ_TYPE_NONE;
+ girq->handler = handle_bad_irq;
+
+ /* GPE setup is optional */
+ sch->gpe = GPE0E_GPIO;
+ sch->gpe_handler = sch_gpio_gpe_handler;
+
+ ret = sch_gpio_install_gpe_handler(sch);
+ if (ret)
+ dev_warn(&pdev->dev, "Can't setup GPE, no IRQ support\n");
+
return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
}
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 1aacd2a5a1fd..3ef22a3c104d 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1291,6 +1291,13 @@ void acpi_gpiochip_remove(struct gpio_chip *chip)
kfree(acpi_gpio);
}
+void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev)
+{
+ /* Set default fwnode to parent's one if present */
+ if (gc->parent)
+ ACPI_COMPANION_SET(&gdev->dev, ACPI_COMPANION(gc->parent));
+}
+
static int acpi_gpio_package_count(const union acpi_object *obj)
{
const union acpi_object *element = obj->package.elements;
@@ -1440,6 +1447,20 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
},
{
/*
+ * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an
+ * external embedded-controller connected via I2C + an ACPI GPIO
+ * event handler on INT33FFC:02 pin 12, causing spurious wakeups.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "INT33FC:02@12",
+ },
+ },
+ {
+ /*
* HP X2 10 models with Cherry Trail SoC + TI PMIC use an
* external embedded-controller connected via I2C + an ACPI GPIO
* event handler on INT33FF:01 pin 0, causing spurious wakeups.
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index e2edb632b2cc..e476558d9471 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -36,6 +36,8 @@ struct acpi_gpio_info {
void acpi_gpiochip_add(struct gpio_chip *chip);
void acpi_gpiochip_remove(struct gpio_chip *chip);
+void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev);
+
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip);
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip);
@@ -58,6 +60,8 @@ int acpi_gpio_count(struct device *dev, const char *con_id);
static inline void acpi_gpiochip_add(struct gpio_chip *chip) { }
static inline void acpi_gpiochip_remove(struct gpio_chip *chip) { }
+static inline void acpi_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev) { }
+
static inline void
acpi_gpiochip_request_interrupts(struct gpio_chip *chip) { }
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index baf0153b7bca..bbcc7c073f63 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -1042,11 +1042,13 @@ void of_gpiochip_remove(struct gpio_chip *chip)
void of_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev)
{
+ /* Set default OF node to parent's one if present */
+ if (gc->parent)
+ gdev->dev.of_node = gc->parent->of_node;
+
/* If the gpiochip has an assigned OF node this takes precedence */
if (gc->of_node)
gdev->dev.of_node = gc->of_node;
else
gc->of_node = gdev->dev.of_node;
- if (gdev->dev.of_node)
- gdev->dev.fwnode = of_fwnode_handle(gdev->dev.of_node);
}
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6367646dce83..1427c1be749b 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -586,14 +586,12 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
if (!gdev)
return -ENOMEM;
gdev->dev.bus = &gpio_bus_type;
+ gdev->dev.parent = gc->parent;
gdev->chip = gc;
gc->gpiodev = gdev;
- if (gc->parent) {
- gdev->dev.parent = gc->parent;
- gdev->dev.of_node = gc->parent->of_node;
- }
of_gpio_dev_init(gc, gdev);
+ acpi_gpio_dev_init(gc, gdev);
/*
* Assign fwnode depending on the result of the previous calls,
@@ -1465,9 +1463,8 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
struct lock_class_key *lock_key,
struct lock_class_key *request_key)
{
+ struct fwnode_handle *fwnode = dev_fwnode(&gc->gpiodev->dev);
struct irq_chip *irqchip = gc->irq.chip;
- const struct irq_domain_ops *ops = NULL;
- struct device_node *np;
unsigned int type;
unsigned int i;
@@ -1479,7 +1476,6 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return -EINVAL;
}
- np = gc->gpiodev->dev.of_node;
type = gc->irq.default_type;
/*
@@ -1487,15 +1483,9 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
* used to configure the interrupts, as you may end up with
* conflicting triggers. Tell the user, and reset to NONE.
*/
- if (WARN(np && type != IRQ_TYPE_NONE,
- "%s: Ignoring %u default trigger\n", np->full_name, type))
- type = IRQ_TYPE_NONE;
-
- if (has_acpi_companion(gc->parent) && type != IRQ_TYPE_NONE) {
- acpi_handle_warn(ACPI_HANDLE(gc->parent),
- "Ignoring %u default trigger\n", type);
+ if (WARN(fwnode && type != IRQ_TYPE_NONE,
+ "%pfw: Ignoring %u default trigger\n", fwnode, type))
type = IRQ_TYPE_NONE;
- }
if (gc->to_irq)
chip_warn(gc, "to_irq is redefined in %s and you shouldn't rely on it\n", __func__);
@@ -1512,15 +1502,11 @@ static int gpiochip_add_irqchip(struct gpio_chip *gc,
return ret;
} else {
/* Some drivers provide custom irqdomain ops */
- if (gc->irq.domain_ops)
- ops = gc->irq.domain_ops;
-
- if (!ops)
- ops = &gpiochip_domain_ops;
- gc->irq.domain = irq_domain_add_simple(np,
+ gc->irq.domain = irq_domain_create_simple(fwnode,
gc->ngpio,
gc->irq.first,
- ops, gc);
+ gc->irq.domain_ops ?: &gpiochip_domain_ops,
+ gc);
if (!gc->irq.domain)
return -EINVAL;
}
@@ -3684,11 +3670,12 @@ EXPORT_SYMBOL_GPL(fwnode_gpiod_get_index);
*/
int gpiod_count(struct device *dev, const char *con_id)
{
+ const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
int count = -ENOENT;
- if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+ if (is_of_node(fwnode))
count = of_gpio_get_count(dev, con_id);
- else if (IS_ENABLED(CONFIG_ACPI) && dev && ACPI_HANDLE(dev))
+ else if (is_acpi_node(fwnode))
count = acpi_gpio_count(dev, con_id);
if (count < 0)
@@ -3826,18 +3813,17 @@ struct gpio_desc *__must_check gpiod_get_index(struct device *dev,
int ret;
/* Maybe we have a device name, maybe not */
const char *devname = dev ? dev_name(dev) : "?";
+ const struct fwnode_handle *fwnode = dev ? dev_fwnode(dev) : NULL;
dev_dbg(dev, "GPIO lookup for consumer %s\n", con_id);
- if (dev) {
- /* Using device tree? */
- if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
- dev_dbg(dev, "using device tree for GPIO lookup\n");
- desc = of_find_gpio(dev, con_id, idx, &lookupflags);
- } else if (ACPI_COMPANION(dev)) {
- dev_dbg(dev, "using ACPI for GPIO lookup\n");
- desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
- }
+ /* Using device tree? */
+ if (is_of_node(fwnode)) {
+ dev_dbg(dev, "using device tree for GPIO lookup\n");
+ desc = of_find_gpio(dev, con_id, idx, &lookupflags);
+ } else if (is_acpi_node(fwnode)) {
+ dev_dbg(dev, "using ACPI for GPIO lookup\n");
+ desc = acpi_find_gpio(dev, con_id, idx, &flags, &lookupflags);
}
/*
@@ -3921,9 +3907,6 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
struct gpio_desc *desc = ERR_PTR(-ENODEV);
int ret;
- if (!fwnode)
- return ERR_PTR(-EINVAL);
-
if (is_of_node(fwnode)) {
desc = gpiod_get_from_of_node(to_of_node(fwnode),
propname, index,
@@ -3939,7 +3922,8 @@ struct gpio_desc *fwnode_get_named_gpiod(struct fwnode_handle *fwnode,
acpi_gpio_update_gpiod_flags(&dflags, &info);
acpi_gpio_update_gpiod_lookup_flags(&lflags, &info);
- }
+ } else
+ return ERR_PTR(-EINVAL);
/* Currently only ACPI takes this path */
ret = gpiod_request(desc, label);
@@ -4220,11 +4204,13 @@ EXPORT_SYMBOL_GPL(gpiod_put_array);
static int gpio_bus_match(struct device *dev, struct device_driver *drv)
{
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
+
/*
* Only match if the fwnode doesn't already have a proper struct device
* created for it.
*/
- if (dev->fwnode && dev->fwnode->dev != dev)
+ if (fwnode && fwnode->dev != dev)
return 0;
return 1;
}
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 70a932470b2d..73d039476fa4 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -4,10 +4,12 @@
#ifndef __ASSEMBLY__
-#include <linux/types.h>
#include <linux/bitops.h>
-#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+struct device;
/*
* bitmaps provide bit arrays that consume one or more unsigned
@@ -118,54 +120,59 @@
* Allocation and deallocation of bitmap.
* Provided in lib/bitmap.c to avoid circular dependency.
*/
-extern unsigned long *bitmap_alloc(unsigned int nbits, gfp_t flags);
-extern unsigned long *bitmap_zalloc(unsigned int nbits, gfp_t flags);
-extern void bitmap_free(const unsigned long *bitmap);
+unsigned long *bitmap_alloc(unsigned int nbits, gfp_t flags);
+unsigned long *bitmap_zalloc(unsigned int nbits, gfp_t flags);
+void bitmap_free(const unsigned long *bitmap);
+
+/* Managed variants of the above. */
+unsigned long *devm_bitmap_alloc(struct device *dev,
+ unsigned int nbits, gfp_t flags);
+unsigned long *devm_bitmap_zalloc(struct device *dev,
+ unsigned int nbits, gfp_t flags);
/*
* lib/bitmap.c provides these functions:
*/
-extern int __bitmap_equal(const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern bool __pure __bitmap_or_equal(const unsigned long *src1,
- const unsigned long *src2,
- const unsigned long *src3,
- unsigned int nbits);
-extern void __bitmap_complement(unsigned long *dst, const unsigned long *src,
- unsigned int nbits);
-extern void __bitmap_shift_right(unsigned long *dst, const unsigned long *src,
- unsigned int shift, unsigned int nbits);
-extern void __bitmap_shift_left(unsigned long *dst, const unsigned long *src,
- unsigned int shift, unsigned int nbits);
-extern void bitmap_cut(unsigned long *dst, const unsigned long *src,
- unsigned int first, unsigned int cut,
- unsigned int nbits);
-extern int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+int __bitmap_equal(const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+bool __pure __bitmap_or_equal(const unsigned long *src1,
+ const unsigned long *src2,
+ const unsigned long *src3,
+ unsigned int nbits);
+void __bitmap_complement(unsigned long *dst, const unsigned long *src,
+ unsigned int nbits);
+void __bitmap_shift_right(unsigned long *dst, const unsigned long *src,
+ unsigned int shift, unsigned int nbits);
+void __bitmap_shift_left(unsigned long *dst, const unsigned long *src,
+ unsigned int shift, unsigned int nbits);
+void bitmap_cut(unsigned long *dst, const unsigned long *src,
+ unsigned int first, unsigned int cut, unsigned int nbits);
+int __bitmap_and(unsigned long *dst, const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+void __bitmap_replace(unsigned long *dst,
+ const unsigned long *old, const unsigned long *new,
+ const unsigned long *mask, unsigned int nbits);
+int __bitmap_intersects(const unsigned long *bitmap1,
const unsigned long *bitmap2, unsigned int nbits);
-extern void __bitmap_or(unsigned long *dst, const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern void __bitmap_xor(unsigned long *dst, const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern int __bitmap_andnot(unsigned long *dst, const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern void __bitmap_replace(unsigned long *dst,
- const unsigned long *old, const unsigned long *new,
- const unsigned long *mask, unsigned int nbits);
-extern int __bitmap_intersects(const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern int __bitmap_subset(const unsigned long *bitmap1,
- const unsigned long *bitmap2, unsigned int nbits);
-extern int __bitmap_weight(const unsigned long *bitmap, unsigned int nbits);
-extern void __bitmap_set(unsigned long *map, unsigned int start, int len);
-extern void __bitmap_clear(unsigned long *map, unsigned int start, int len);
-
-extern unsigned long bitmap_find_next_zero_area_off(unsigned long *map,
- unsigned long size,
- unsigned long start,
- unsigned int nr,
- unsigned long align_mask,
- unsigned long align_offset);
+int __bitmap_subset(const unsigned long *bitmap1,
+ const unsigned long *bitmap2, unsigned int nbits);
+int __bitmap_weight(const unsigned long *bitmap, unsigned int nbits);
+void __bitmap_set(unsigned long *map, unsigned int start, int len);
+void __bitmap_clear(unsigned long *map, unsigned int start, int len);
+
+unsigned long bitmap_find_next_zero_area_off(unsigned long *map,
+ unsigned long size,
+ unsigned long start,
+ unsigned int nr,
+ unsigned long align_mask,
+ unsigned long align_offset);
/**
* bitmap_find_next_zero_area - find a contiguous aligned zero area
@@ -190,33 +197,33 @@ bitmap_find_next_zero_area(unsigned long *map,
align_mask, 0);
}
-extern int bitmap_parse(const char *buf, unsigned int buflen,
+int bitmap_parse(const char *buf, unsigned int buflen,
unsigned long *dst, int nbits);
-extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
+int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
unsigned long *dst, int nbits);
-extern int bitmap_parselist(const char *buf, unsigned long *maskp,
+int bitmap_parselist(const char *buf, unsigned long *maskp,
int nmaskbits);
-extern int bitmap_parselist_user(const char __user *ubuf, unsigned int ulen,
+int bitmap_parselist_user(const char __user *ubuf, unsigned int ulen,
unsigned long *dst, int nbits);
-extern void bitmap_remap(unsigned long *dst, const unsigned long *src,
+void bitmap_remap(unsigned long *dst, const unsigned long *src,
const unsigned long *old, const unsigned long *new, unsigned int nbits);
-extern int bitmap_bitremap(int oldbit,
+int bitmap_bitremap(int oldbit,
const unsigned long *old, const unsigned long *new, int bits);
-extern void bitmap_onto(unsigned long *dst, const unsigned long *orig,
+void bitmap_onto(unsigned long *dst, const unsigned long *orig,
const unsigned long *relmap, unsigned int bits);
-extern void bitmap_fold(unsigned long *dst, const unsigned long *orig,
+void bitmap_fold(unsigned long *dst, const unsigned long *orig,
unsigned int sz, unsigned int nbits);
-extern int bitmap_find_free_region(unsigned long *bitmap, unsigned int bits, int order);
-extern void bitmap_release_region(unsigned long *bitmap, unsigned int pos, int order);
-extern int bitmap_allocate_region(unsigned long *bitmap, unsigned int pos, int order);
+int bitmap_find_free_region(unsigned long *bitmap, unsigned int bits, int order);
+void bitmap_release_region(unsigned long *bitmap, unsigned int pos, int order);
+int bitmap_allocate_region(unsigned long *bitmap, unsigned int pos, int order);
#ifdef __BIG_ENDIAN
-extern void bitmap_copy_le(unsigned long *dst, const unsigned long *src, unsigned int nbits);
+void bitmap_copy_le(unsigned long *dst, const unsigned long *src, unsigned int nbits);
#else
#define bitmap_copy_le bitmap_copy
#endif
-extern unsigned int bitmap_ord_to_pos(const unsigned long *bitmap, unsigned int ord, unsigned int nbits);
-extern int bitmap_print_to_pagebuf(bool list, char *buf,
+unsigned int bitmap_ord_to_pos(const unsigned long *bitmap, unsigned int ord, unsigned int nbits);
+int bitmap_print_to_pagebuf(bool list, char *buf,
const unsigned long *maskp, int nmaskbits);
#define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) & (BITS_PER_LONG - 1)))
@@ -265,9 +272,9 @@ static inline void bitmap_copy_clear_tail(unsigned long *dst,
* therefore conversion is not needed when copying data from/to arrays of u32.
*/
#if BITS_PER_LONG == 64
-extern void bitmap_from_arr32(unsigned long *bitmap, const u32 *buf,
+void bitmap_from_arr32(unsigned long *bitmap, const u32 *buf,
unsigned int nbits);
-extern void bitmap_to_arr32(u32 *buf, const unsigned long *bitmap,
+void bitmap_to_arr32(u32 *buf, const unsigned long *bitmap,
unsigned int nbits);
#else
#define bitmap_from_arr32(bitmap, buf, nbits) \
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index ecf0032a0995..3a268781fcec 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -227,7 +227,7 @@ struct gpio_irq_chip {
/**
* @valid_mask:
*
- * If not %NULL holds bitmask of GPIOs which are valid to be included
+ * If not %NULL, holds bitmask of GPIOs which are valid to be included
* in IRQ domain of the chip.
*/
unsigned long *valid_mask;
@@ -346,7 +346,7 @@ struct gpio_irq_chip {
* output.
*
* A gpio_chip can help platforms abstract various sources of GPIOs so
- * they can all be accessed through a common programing interface.
+ * they can all be accessed through a common programming interface.
* Example sources would be SOC controllers, FPGAs, multifunction
* chips, dedicated GPIO expanders, and so on.
*
@@ -435,15 +435,15 @@ struct gpio_chip {
/**
* @valid_mask:
*
- * If not %NULL holds bitmask of GPIOs which are valid to be used
+ * If not %NULL, holds bitmask of GPIOs which are valid to be used
* from the chip.
*/
unsigned long *valid_mask;
#if defined(CONFIG_OF_GPIO)
/*
- * If CONFIG_OF is enabled, then all GPIO controllers described in the
- * device tree automatically may have an OF translation
+ * If CONFIG_OF_GPIO is enabled, then all GPIO controllers described in
+ * the device tree automatically may have an OF translation
*/
/**
@@ -508,7 +508,7 @@ extern int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
* for GPIOs will fail rudely.
*
* gpiochip_add_data() must only be called after gpiolib initialization,
- * ie after core_initcall().
+ * i.e. after core_initcall().
*
* If gc->base is negative, this requests dynamic assignment of
* a range of valid GPIOs.
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 7a1dd7b969b6..62a8e3d23829 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -256,11 +256,11 @@ struct irq_domain *__irq_domain_add(struct fwnode_handle *fwnode, int size,
irq_hw_number_t hwirq_max, int direct_max,
const struct irq_domain_ops *ops,
void *host_data);
-struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
- unsigned int size,
- unsigned int first_irq,
- const struct irq_domain_ops *ops,
- void *host_data);
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data);
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
@@ -325,6 +325,15 @@ static inline struct irq_domain *irq_find_host(struct device_node *node)
return d;
}
+static inline struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
+{
+ return irq_domain_create_simple(of_node_to_fwnode(of_node), size, first_irq, ops, host_data);
+}
+
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index f42ef868efd3..6284443b87ec 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -295,8 +295,8 @@ void irq_domain_update_bus_token(struct irq_domain *domain,
EXPORT_SYMBOL_GPL(irq_domain_update_bus_token);
/**
- * irq_domain_add_simple() - Register an irq_domain and optionally map a range of irqs
- * @of_node: pointer to interrupt controller's device tree node.
+ * irq_domain_create_simple() - Register an irq_domain and optionally map a range of irqs
+ * @fwnode: firmware node for the interrupt controller
* @size: total number of irqs in mapping
* @first_irq: first number of irq block assigned to the domain,
* pass zero to assign irqs on-the-fly. If first_irq is non-zero, then
@@ -312,15 +312,15 @@ EXPORT_SYMBOL_GPL(irq_domain_update_bus_token);
* irqs get mapped dynamically on the fly. However, if the controller requires
* static virq assignments (non-DT boot) then it will set that up correctly.
*/
-struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
- unsigned int size,
- unsigned int first_irq,
- const struct irq_domain_ops *ops,
- void *host_data)
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
struct irq_domain *domain;
- domain = __irq_domain_add(of_node_to_fwnode(of_node), size, size, 0, ops, host_data);
+ domain = __irq_domain_add(fwnode, size, size, 0, ops, host_data);
if (!domain)
return NULL;
@@ -328,7 +328,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
- of_node_to_nid(of_node));
+ of_node_to_nid(to_of_node(fwnode)));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
@@ -338,7 +338,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
return domain;
}
-EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+EXPORT_SYMBOL_GPL(irq_domain_create_simple);
/**
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
diff --git a/lib/bitmap.c b/lib/bitmap.c
index 9f4626a4c95f..74ceb02f45e3 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -3,17 +3,19 @@
* lib/bitmap.c
* Helper functions for bitmap.h.
*/
-#include <linux/export.h>
-#include <linux/thread_info.h>
-#include <linux/ctype.h>
-#include <linux/errno.h>
+
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/bug.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/thread_info.h>
#include <linux/uaccess.h>
#include <asm/page.h>
@@ -1271,6 +1273,38 @@ void bitmap_free(const unsigned long *bitmap)
}
EXPORT_SYMBOL(bitmap_free);
+static void devm_bitmap_free(void *data)
+{
+ unsigned long *bitmap = data;
+
+ bitmap_free(bitmap);
+}
+
+unsigned long *devm_bitmap_alloc(struct device *dev,
+ unsigned int nbits, gfp_t flags)
+{
+ unsigned long *bitmap;
+ int ret;
+
+ bitmap = bitmap_alloc(nbits, flags);
+ if (!bitmap)
+ return NULL;
+
+ ret = devm_add_action_or_reset(dev, devm_bitmap_free, bitmap);
+ if (ret)
+ return NULL;
+
+ return bitmap;
+}
+EXPORT_SYMBOL_GPL(devm_bitmap_alloc);
+
+unsigned long *devm_bitmap_zalloc(struct device *dev,
+ unsigned int nbits, gfp_t flags)
+{
+ return devm_bitmap_alloc(dev, nbits, flags | __GFP_ZERO);
+}
+EXPORT_SYMBOL_GPL(devm_bitmap_zalloc);
+
#if BITS_PER_LONG == 64
/**
* bitmap_from_arr32 - copy the contents of u32 array of bits to bitmap
diff --git a/lib/cmdline.c b/lib/cmdline.c
index 5d474c626e24..5546bf588780 100644
--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -272,3 +272,4 @@ char *next_arg(char *args, char **param, char **val)
/* Chew up trailing spaces. */
return skip_spaces(args);
}
+EXPORT_SYMBOL(next_arg);
diff --git a/tools/gpio/gpio-utils.c b/tools/gpio/gpio-utils.c
index 1639b4d832cd..4096bcd511d1 100644
--- a/tools/gpio/gpio-utils.c
+++ b/tools/gpio/gpio-utils.c
@@ -20,7 +20,7 @@
#define CONSUMER "gpio-utils"
/**
- * doc: Operation of gpio
+ * DOC: Operation of gpio
*
* Provide the api of gpiochip for chardev interface. There are two
* types of api. The first one provide as same function as each
@@ -100,7 +100,7 @@ exit_free_name:
}
/**
- * gpiotools_set_values(): Set the value of gpio(s)
+ * gpiotools_set_values() - Set the value of gpio(s)
* @fd: The fd returned by
* gpiotools_request_line().
* @values: The array of values want to set.
@@ -124,7 +124,7 @@ int gpiotools_set_values(const int fd, struct gpio_v2_line_values *values)
}
/**
- * gpiotools_get_values(): Get the value of gpio(s)
+ * gpiotools_get_values() - Get the value of gpio(s)
* @fd: The fd returned by
* gpiotools_request_line().
* @values: The array of values get from hardware.
@@ -148,7 +148,7 @@ int gpiotools_get_values(const int fd, struct gpio_v2_line_values *values)
}
/**
- * gpiotools_release_line(): Release the line(s) of gpiochip
+ * gpiotools_release_line() - Release the line(s) of gpiochip
* @fd: The fd returned by
* gpiotools_request_line().
*
@@ -169,7 +169,7 @@ int gpiotools_release_line(const int fd)
}
/**
- * gpiotools_get(): Get value from specific line
+ * gpiotools_get() - Get value from specific line
* @device_name: The name of gpiochip without prefix "/dev/",
* such as "gpiochip0"
* @line: number of line, such as 2.
@@ -191,7 +191,7 @@ int gpiotools_get(const char *device_name, unsigned int line)
/**
- * gpiotools_gets(): Get values from specific lines.
+ * gpiotools_gets() - Get values from specific lines.
* @device_name: The name of gpiochip without prefix "/dev/",
* such as "gpiochip0".
* @lines: An array desired lines, specified by offset
@@ -230,7 +230,7 @@ int gpiotools_gets(const char *device_name, unsigned int *lines,
}
/**
- * gpiotools_set(): Set value to specific line
+ * gpiotools_set() - Set value to specific line
* @device_name: The name of gpiochip without prefix "/dev/",
* such as "gpiochip0"
* @line: number of line, such as 2.
@@ -248,13 +248,13 @@ int gpiotools_set(const char *device_name, unsigned int line,
}
/**
- * gpiotools_sets(): Set values to specific lines.
+ * gpiotools_sets() - Set values to specific lines.
* @device_name: The name of gpiochip without prefix "/dev/",
* such as "gpiochip0".
* @lines: An array desired lines, specified by offset
* index for the associated GPIO device.
* @num_lines: The number of lines to request.
- * @value: The array of values set to gpiochip, must be
+ * @values: The array of values set to gpiochip, must be
* 0(low) or 1(high).
*
* Return: On success return 0;