diff options
| -rw-r--r-- | drivers/gpu/drm/panel/panel-simple.c | 37 |
1 files changed, 23 insertions, 14 deletions
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 1bee197821ef..602809f6da6a 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1702,23 +1702,32 @@ static const struct panel_desc innolux_g121x1_l03 = { }, }; -static const struct drm_display_mode innolux_n116bge_mode = { - .clock = 76420, - .hdisplay = 1366, - .hsync_start = 1366 + 136, - .hsync_end = 1366 + 136 + 30, - .htotal = 1366 + 136 + 30 + 60, - .vdisplay = 768, - .vsync_start = 768 + 8, - .vsync_end = 768 + 8 + 12, - .vtotal = 768 + 8 + 12 + 12, - .vrefresh = 60, - .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, +/* + * Datasheet specifies that at 60 Hz refresh rate: + * - total horizontal time: { 1506, 1592, 1716 } + * - total vertical time: { 788, 800, 868 } + * + * ...but doesn't go into exactly how that should be split into a front + * porch, back porch, or sync length. For now we'll leave a single setting + * here which allows a bit of tweaking of the pixel clock at the expense of + * refresh rate. + */ +static const struct display_timing innolux_n116bge_timing = { + .pixelclock = { 72600000, 76420000, 80240000 }, + .hactive = { 1366, 1366, 1366 }, + .hfront_porch = { 136, 136, 136 }, + .hback_porch = { 60, 60, 60 }, + .hsync_len = { 30, 30, 30 }, + .vactive = { 768, 768, 768 }, + .vfront_porch = { 8, 8, 8 }, + .vback_porch = { 12, 12, 12 }, + .vsync_len = { 12, 12, 12 }, + .flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW, }; static const struct panel_desc innolux_n116bge = { - .modes = &innolux_n116bge_mode, - .num_modes = 1, + .timings = &innolux_n116bge_timing, + .num_timings = 1, .bpc = 6, .size = { .width = 256, |