diff options
83 files changed, 2487 insertions, 438 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt index 313dabdc14f9..faa4b44572e3 100644 --- a/Documentation/devicetree/bindings/arm/arm,scpi.txt +++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt @@ -87,10 +87,33 @@ Required properties: implementation for the IDs to use. For Juno R0 and Juno R1 refer to [3]. +Power domain bindings for the power domains based on SCPI Message Protocol +------------------------------------------------------------ + +This binding uses the generic power domain binding[4]. + +PM domain providers +=================== + +Required properties: + - #power-domain-cells : Should be 1. Contains the device or the power + domain ID value used by SCPI commands. + - num-domains: Total number of power domains provided by SCPI. This is + needed as the SCPI message protocol lacks a mechanism to + query this information at runtime. + +PM domain consumers +=================== + +Required properties: + - power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. + [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt [3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html +[4] Documentation/devicetree/bindings/power/power_domain.txt Example: @@ -144,6 +167,12 @@ scpi_protocol: scpi@2e000000 { compatible = "arm,scpi-sensors"; #thermal-sensor-cells = <1>; }; + + scpi_devpd: scpi-power-domains { + compatible = "arm,scpi-power-domains"; + num-domains = <2>; + #power-domain-cells = <1>; + }; }; cpu@0 { @@ -156,6 +185,7 @@ hdlcd@7ff60000 { ... reg = <0 0x7ff60000 0 0x1000>; clocks = <&scpi_clk 4>; + power-domains = <&scpi_devpd 1>; }; thermal-zones { @@ -186,3 +216,7 @@ The thermal-sensors property in the soc_thermal node uses the temperature sensor provided by SCP firmware to setup a thermal zone. The ID "3" is the sensor identifier for the temperature sensor as used by the firmware. + +The num-domains property in scpi-power-domains domain specifies that +SCPI provides 2 power domains. The hdlcd node uses the power domain with +domain ID 1. diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt index 2d5787eac91a..92c94f5ecbf1 100644 --- a/Documentation/devicetree/bindings/media/s5p-mfc.txt +++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt @@ -21,15 +21,18 @@ Required properties: - clock-names : from common clock binding: must contain "mfc", corresponding to entry in the clocks property. - - samsung,mfc-r : Base address of the first memory bank used by MFC - for DMA contiguous memory allocation and its size. - - - samsung,mfc-l : Base address of the second memory bank used by MFC - for DMA contiguous memory allocation and its size. - Optional properties: - power-domains : power-domain property defined with a phandle to respective power domain. + - memory-region : from reserved memory binding: phandles to two reserved + memory regions, first is for "left" mfc memory bus interfaces, + second if for the "right" mfc memory bus, used when no SYSMMU + support is available + +Obsolete properties: + - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region + property instead + Example: SoC specific DT entry: @@ -43,9 +46,29 @@ mfc: codec@13400000 { clock-names = "mfc"; }; +Reserved memory specific DT entry for given board (see reserved memory binding +for more information): + +reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x800000>; + }; + + mfc_right: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x800000>; + }; +}; + Board specific DT entry: codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; diff --git a/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt new file mode 100644 index 000000000000..9bb5f57e2066 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/atmel,ebi.txt @@ -0,0 +1,136 @@ +* Device tree bindings for Atmel EBI + +The External Bus Interface (EBI) controller is a bus where you can connect +asynchronous (NAND, NOR, SRAM, ....) and synchronous memories (SDR/DDR SDRAMs). +The EBI provides a glue-less interface to asynchronous memories through the SMC +(Static Memory Controller). + +Required properties: + +- compatible: "atmel,at91sam9260-ebi" + "atmel,at91sam9261-ebi" + "atmel,at91sam9263-ebi0" + "atmel,at91sam9263-ebi1" + "atmel,at91sam9rl-ebi" + "atmel,at91sam9g45-ebi" + "atmel,at91sam9x5-ebi" + "atmel,sama5d3-ebi" + +- reg: Contains offset/length value for EBI memory mapping. + This property might contain several entries if the EBI + memory range is not contiguous + +- #address-cells: Must be 2. + The first cell encodes the CS. + The second cell encode the offset into the CS memory + range. + +- #size-cells: Must be set to 1. + +- ranges: Encodes CS to memory region association. + +- clocks: Clock feeding the EBI controller. + See clock-bindings.txt + +Children device nodes are representing device connected to the EBI bus. + +Required device node properties: + +- reg: Contains the chip-select id, the offset and the length + of the memory region requested by the device. + +EBI bus configuration will be defined directly in the device subnode. + +Optional EBI/SMC properties: + +- atmel,smc-bus-width: width of the asynchronous device's data bus + 8, 16 or 32. + Default to 8 when undefined. + +- atmel,smc-byte-access-type "write" or "select" (see Atmel datasheet). + Default to "select" when undefined. + +- atmel,smc-read-mode "nrd" or "ncs". + Default to "ncs" when undefined. + +- atmel,smc-write-mode "nwe" or "ncs". + Default to "ncs" when undefined. + +- atmel,smc-exnw-mode "disabled", "frozen" or "ready". + Default to "disabled" when undefined. + +- atmel,smc-page-mode enable page mode if present. The provided value + defines the page size (supported values: 4, 8, + 16 and 32). + +- atmel,smc-tdf-mode: "normal" or "optimized". When set to + "optimized" the data float time is optimized + depending on the next device being accessed + (next device setup time is subtracted to the + current device data float time). + Default to "normal" when undefined. + +If at least one atmel,smc- property is defined the following SMC timing +properties become mandatory. In the other hand, if none of the atmel,smc- +properties are specified, we assume that the EBI bus configuration will be +handled by the sub-device driver, and none of those properties should be +defined. + +All the timings are expressed in nanoseconds (see Atmel datasheet for a full +description). + +- atmel,smc-ncs-rd-setup-ns +- atmel,smc-nrd-setup-ns +- atmel,smc-ncs-wr-setup-ns +- atmel,smc-nwe-setup-ns +- atmel,smc-ncs-rd-pulse-ns +- atmel,smc-nrd-pulse-ns +- atmel,smc-ncs-wr-pulse-ns +- atmel,smc-nwe-pulse-ns +- atmel,smc-nwe-cycle-ns +- atmel,smc-nrd-cycle-ns +- atmel,smc-tdf-ns + +Example: + + ebi: ebi@10000000 { + compatible = "atmel,sama5d3-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&hsmc>; + atmel,matrix = <&matrix>; + reg = <0x10000000 0x10000000 + 0x40000000 0x30000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x40000000 0x10000000 + 0x2 0x0 0x50000000 0x10000000 + 0x3 0x0 0x60000000 0x10000000>; + clocks = <&mck>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr>; + + nor: flash@0,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + + atmel,smc-read-mode = "nrd"; + atmel,smc-write-mode = "nwe"; + atmel,smc-bus-width = <16>; + atmel,smc-ncs-rd-setup-ns = <0>; + atmel,smc-ncs-wr-setup-ns = <0>; + atmel,smc-nwe-setup-ns = <8>; + atmel,smc-nrd-setup-ns = <16>; + atmel,smc-ncs-rd-pulse-ns = <84>; + atmel,smc-ncs-wr-pulse-ns = <84>; + atmel,smc-nrd-pulse-ns = <76>; + atmel,smc-nwe-pulse-ns = <76>; + atmel,smc-nrd-cycle-ns = <107>; + atmel,smc-nwe-cycle-ns = <84>; + atmel,smc-tdf-ns = <16>; + }; + }; + diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index b74e4d4785ab..0725fb37a973 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -14,6 +14,7 @@ Required properties: - "renesas,r8a7793-sysc" (R-Car M2-N) - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) + - "renesas,r8a7796-sysc" (R-Car M3-W) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt new file mode 100644 index 000000000000..e746b631793a --- /dev/null +++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt @@ -0,0 +1,18 @@ +Amlogic Meson SoC Reset Controller +======================================= + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset" +- reg: should contain the register address base +- #reset-cells: 1, see below + +example: + +reset: reset-controller { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; +}; diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index c63eea0c1c8c..f5e522342ee5 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -352,6 +352,10 @@ REGULATOR devm_regulator_put() devm_regulator_register() +RESET + devm_reset_control_get() + devm_reset_controller_register() + SLAVE DMA ENGINE devm_acpi_dma_controller_register() diff --git a/MAINTAINERS b/MAINTAINERS index 79a43ea6e14e..d5c45bce85d4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2490,6 +2490,7 @@ F: arch/arm64/boot/dts/broadcom/ F: arch/arm/configs/bcm_defconfig F: drivers/mmc/host/sdhci-bcm-kona.c F: drivers/clocksource/bcm_kona_timer.c +F: drivers/power/reset/brcm-kona-reset.c BROADCOM BCM2835 ARM ARCHITECTURE M: Stephen Warren <swarren@wwwdotorg.org> diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi new file mode 100644 index 000000000000..c4d063ae6b74 --- /dev/null +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -0,0 +1,29 @@ +/* + * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition. + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x800000>; + }; + + mfc_right: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x800000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index ad7394c1d67a..f5e4eb23aa21 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -18,6 +18,7 @@ #include "exynos4210.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -288,8 +289,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 94ca7d36ab37..de917f0d907d 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -17,6 +17,7 @@ /dts-v1/; #include "exynos4210.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -133,8 +134,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ec7619a384a2..276ac9a7bb82 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,7 @@ #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { chosen { @@ -499,6 +500,11 @@ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; + status = "okay"; +}; + &mixer { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8bca699b7f20..cd363d7e4e34 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -16,6 +16,7 @@ #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -466,8 +467,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a51069f3c03b..9b6d561dbdac 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -112,8 +113,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 85dad29c08dc..39940f4bd556 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -14,6 +14,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -516,8 +517,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b7992b13c9de..9fac874af5eb 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -344,8 +345,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index ac291f540812..784130bdb6a3 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -14,6 +14,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Spring"; @@ -425,8 +426,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 60bc861d0f9d..b8b5f3ae2942 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -16,6 +16,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -347,8 +348,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index f9d2e4f1a0e0..d530b4f5f1e9 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -16,6 +16,7 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -695,8 +696,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 2e748d19322f..5206f41e548d 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -13,6 +13,7 @@ #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -355,8 +356,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 2a4e10bc8801..7c2335f18bfc 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -17,6 +17,7 @@ #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" #include "exynos5422-cpu-thermal.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { memory { @@ -406,8 +407,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 62ceb89e073f..1f735963ca98 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -16,6 +16,7 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -670,8 +671,7 @@ }; &mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; + memory-region = <&mfc_left>, <&mfc_right>; }; &mmc_0 { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index e65aa7d11b20..58b334f5f1d6 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -19,6 +19,7 @@ menuconfig ARCH_EXYNOS select EXYNOS_THERMAL select EXYNOS_PMU select EXYNOS_SROM + select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 34d29df3e006..9ea6c54645ad 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o -obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o @@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a - -obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 52ccf247e079..a8620c6eb723 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -27,7 +27,6 @@ #include <mach/map.h> #include "common.h" -#include "mfc.h" static struct map_desc exynos4_iodesc[] __initdata = { { @@ -237,23 +236,6 @@ static char const *const exynos_dt_compat[] __initconst = { NULL }; -static void __init exynos_reserve(void) -{ -#ifdef CONFIG_S5P_DEV_MFC - int i; - char *mfc_mem[] = { - "samsung,mfc-v5", - "samsung,mfc-v6", - "samsung,mfc-v7", - "samsung,mfc-v8", - }; - - for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) - if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i])) - break; -#endif -} - static void __init exynos_dt_fixup(void) { /* @@ -275,6 +257,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") .init_machine = exynos_dt_machine_init, .init_late = exynos_init_late, .dt_compat = exynos_dt_compat, - .reserve = exynos_reserve, .dt_fixup = exynos_dt_fixup, MACHINE_END diff --git a/arch/arm/mach-exynos/mfc.h b/arch/arm/mach-exynos/mfc.h deleted file mode 100644 index dec93cd5b3c6..000000000000 --- a/arch/arm/mach-exynos/mfc.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2013 Samsung Electronics Co.Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MACH_EXYNOS_MFC_H -#define __MACH_EXYNOS_MFC_H __FILE__ - -int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, - int depth, void *data); - -#endif /* __MACH_EXYNOS_MFC_H */ diff --git a/arch/arm/mach-exynos/s5p-dev-mfc.c b/arch/arm/mach-exynos/s5p-dev-mfc.c deleted file mode 100644 index 8ef1f3ee4e98..000000000000 --- a/arch/arm/mach-exynos/s5p-dev-mfc.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd - * - * Base S5P MFC resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/memblock.h> -#include <linux/ioport.h> -#include <linux/of_fdt.h> -#include <linux/of.h> - -static struct platform_device s5p_device_mfc_l; -static struct platform_device s5p_device_mfc_r; - -struct s5p_mfc_dt_meminfo { - unsigned long loff; - unsigned long lsize; - unsigned long roff; - unsigned long rsize; - char *compatible; -}; - -struct s5p_mfc_reserved_mem { - phys_addr_t base; - unsigned long size; - struct device *dev; -}; - -static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; - - -static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, - phys_addr_t lbase, unsigned int lsize) -{ - int i; - - s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev; - s5p_mfc_mem[0].base = rbase; - s5p_mfc_mem[0].size = rsize; - - s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev; - s5p_mfc_mem[1].base = lbase; - s5p_mfc_mem[1].size = lsize; - - for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { - struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; - if (memblock_remove(area->base, area->size)) { - printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n", - area->size, (unsigned long) area->base); - area->base = 0; - } - } -} - -int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, - int depth, void *data) -{ - const __be32 *prop; - int len; - struct s5p_mfc_dt_meminfo mfc_mem; - - if (!data) - return 0; - - if (!of_flat_dt_is_compatible(node, data)) - return 0; - - prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len); - if (!prop || (len != 2 * sizeof(unsigned long))) - return 0; - - mfc_mem.loff = be32_to_cpu(prop[0]); - mfc_mem.lsize = be32_to_cpu(prop[1]); - - prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len); - if (!prop || (len != 2 * sizeof(unsigned long))) - return 0; - - mfc_mem.roff = be32_to_cpu(prop[0]); - mfc_mem.rsize = be32_to_cpu(prop[1]); - - s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, - mfc_mem.loff, mfc_mem.lsize); - - return 1; -} diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 5e618058defe..541d3fb7ae43 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -10,7 +10,7 @@ config ARM_PSCI_FW config ARM_SCPI_PROTOCOL tristate "ARM System Control and Power Interface (SCPI) Message Protocol" - depends on ARM_MHU + depends on MAILBOX help System Control and Power Interface (SCPI) Message Protocol is defined for the purpose of communication between the Application @@ -27,6 +27,16 @@ config ARM_SCPI_PROTOCOL This protocol library provides interface for all the client drivers making use of the features offered by the SCP. +config ARM_SCPI_POWER_DOMAIN + tristate "SCPI power domain driver" + depends on ARM_SCPI_PROTOCOL || COMPILE_TEST + default y + select PM_GENERIC_DOMAINS if PM + select PM_GENERIC_DOMAINS_OF if PM + help + This enables support for the SCPI power domains which can be + enabled or disabled via the SCP firmware + config EDD tristate "BIOS Enhanced Disk Drive calls determine boot disk" depends on X86 diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 474bada56fcd..44a59dcfc398 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_ARM_PSCI_FW) += psci.o obj-$(CONFIG_ARM_SCPI_PROTOCOL) += arm_scpi.o +obj-$(CONFIG_ARM_SCPI_POWER_DOMAIN) += scpi_pm_domain.o obj-$(CONFIG_DMI) += dmi_scan.o obj-$(CONFIG_DMI_SYSFS) += dmi-sysfs.o obj-$(CONFIG_EDD) += edd.o diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 7e3e595c9f30..438893762076 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -210,10 +210,6 @@ struct dvfs_info { } opps[MAX_DVFS_OPPS]; } __packed; -struct dvfs_get { - u8 index; -} __packed; - struct dvfs_set { u8 domain; u8 index; @@ -235,6 +231,11 @@ struct sensor_value { __le32 hi_val; } __packed; +struct dev_pstate_set { + u16 dev_id; + u8 pstate; +} __packed; + static struct scpi_drvinfo *scpi_info; static int scpi_linux_errmap[SCPI_ERR_MAX] = { @@ -431,11 +432,11 @@ static int scpi_clk_set_val(u16 clk_id, unsigned long rate) static int scpi_dvfs_get_idx(u8 domain) { int ret; - struct dvfs_get dvfs; + u8 dvfs_idx; ret = scpi_send_message(SCPI_CMD_GET_DVFS, &domain, sizeof(domain), - &dvfs, sizeof(dvfs)); - return ret ? ret : dvfs.index; + &dvfs_idx, sizeof(dvfs_idx)); + return ret ? ret : dvfs_idx; } static int scpi_dvfs_set_idx(u8 domain, u8 index) @@ -526,7 +527,7 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info) return ret; } -int scpi_sensor_get_value(u16 sensor, u64 *val) +static int scpi_sensor_get_value(u16 sensor, u64 *val) { __le16 id = cpu_to_le16(sensor); struct sensor_value buf; @@ -541,6 +542,29 @@ int scpi_sensor_get_value(u16 sensor, u64 *val) return ret; } +static int scpi_device_get_power_state(u16 dev_id) +{ + int ret; + u8 pstate; + __le16 id = cpu_to_le16(dev_id); + + ret = scpi_send_message(SCPI_CMD_GET_DEVICE_PWR_STATE, &id, + sizeof(id), &pstate, sizeof(pstate)); + return ret ? ret : pstate; +} + +static int scpi_device_set_power_state(u16 dev_id, u8 pstate) +{ + int stat; + struct dev_pstate_set dev_set = { + .dev_id = cpu_to_le16(dev_id), + .pstate = pstate, + }; + + return scpi_send_message(SCPI_CMD_SET_DEVICE_PWR_STATE, &dev_set, + sizeof(dev_set), &stat, sizeof(stat)); +} + static struct scpi_ops scpi_ops = { .get_version = scpi_get_version, .clk_get_range = scpi_clk_get_range, @@ -552,6 +576,8 @@ static struct scpi_ops scpi_ops = { .sensor_get_capability = scpi_sensor_get_capability, .sensor_get_info = scpi_sensor_get_info, .sensor_get_value = scpi_sensor_get_value, + .device_get_power_state = scpi_device_get_power_state, + .device_set_power_state = scpi_device_set_power_state, }; struct scpi_ops *get_scpi_ops(void) diff --git a/drivers/firmware/scpi_pm_domain.c b/drivers/firmware/scpi_pm_domain.c new file mode 100644 index 000000000000..f395dec27113 --- /dev/null +++ b/drivers/firmware/scpi_pm_domain.c @@ -0,0 +1,163 @@ +/* + * SCPI Generic power domain support. + * + * Copyright (C) 2016 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/pm_domain.h> +#include <linux/scpi_protocol.h> + +struct scpi_pm_domain { + struct generic_pm_domain genpd; + struct scpi_ops *ops; + u32 domain; + char name[30]; +}; + +/* + * These device power state values are not well-defined in the specification. + * In case, different implementations use different values, we can make these + * specific to compatibles rather than getting these values from device tree. + */ +enum scpi_power_domain_state { + SCPI_PD_STATE_ON = 0, + SCPI_PD_STATE_OFF = 3, +}; + +#define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd) + +static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on) +{ + int ret; + enum scpi_power_domain_state state; + + if (power_on) + state = SCPI_PD_STATE_ON; + else + state = SCPI_PD_STATE_OFF; + + ret = pd->ops->device_set_power_state(pd->domain, state); + if (ret) + return ret; + + return !(state == pd->ops->device_get_power_state(pd->domain)); +} + +static int scpi_pd_power_on(struct generic_pm_domain *domain) +{ + struct scpi_pm_domain *pd = to_scpi_pd(domain); + + return scpi_pd_power(pd, true); +} + +static int scpi_pd_power_off(struct generic_pm_domain *domain) +{ + struct scpi_pm_domain *pd = to_scpi_pd(domain); + + return scpi_pd_power(pd, false); +} + +static int scpi_pm_domain_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct scpi_pm_domain *scpi_pd; + struct genpd_onecell_data *scpi_pd_data; + struct generic_pm_domain **domains; + struct scpi_ops *scpi_ops; + int ret, num_domains, i; + + scpi_ops = get_scpi_ops(); + if (!scpi_ops) + return -EPROBE_DEFER; + + if (!np) { + dev_err(dev, "device tree node not found\n"); + return -ENODEV; + } + + if (!scpi_ops->device_set_power_state || + !scpi_ops->device_get_power_state) { + dev_err(dev, "power domains not supported in the firmware\n"); + return -ENODEV; + } + + ret = of_property_read_u32(np, "num-domains", &num_domains); + if (ret) { + dev_err(dev, "number of domains not found\n"); + return -EINVAL; + } + + scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL); + if (!scpi_pd) + return -ENOMEM; + + scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL); + if (!scpi_pd_data) + return -ENOMEM; + + domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL); + if (!domains) + return -ENOMEM; + + for (i = 0; i < num_domains; i++, scpi_pd++) { + domains[i] = &scpi_pd->genpd; + + scpi_pd->domain = i; + scpi_pd->ops = scpi_ops; + sprintf(scpi_pd->name, "%s.%d", np->name, i); + scpi_pd->genpd.name = scpi_pd->name; + scpi_pd->genpd.power_off = scpi_pd_power_off; + scpi_pd->genpd.power_on = scpi_pd_power_on; + + /* + * Treat all power domains as off at boot. + * + * The SCP firmware itself may have switched on some domains, + * but for reference counting purpose, keep it this way. + */ + pm_genpd_init(&scpi_pd->genpd, NULL, true); + } + + scpi_pd_data->domains = domains; + scpi_pd_data->num_domains = num_domains; + + of_genpd_add_provider_onecell(np, scpi_pd_data); + + return 0; +} + +static const struct of_device_id scpi_power_domain_ids[] = { + { .compatible = "arm,scpi-power-domains", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, scpi_power_domain_ids); + +static struct platform_driver scpi_power_domain_driver = { + .driver = { + .name = "scpi_power_domain", + .of_match_table = scpi_power_domain_ids, + }, + .probe = scpi_pm_domain_probe, +}; +module_platform_driver(scpi_power_domain_driver); + +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); +MODULE_DESCRIPTION("ARM SCPI power domain driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index c04973669a47..c9d2009c2476 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -1124,6 +1124,7 @@ static int gsc_probe(struct platform_device *pdev) goto err_m2m; /* Initialize continious memory allocator */ + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(gsc->alloc_ctx)) { ret = PTR_ERR(gsc->alloc_ctx); @@ -1153,6 +1154,7 @@ static int gsc_remove(struct platform_device *pdev) v4l2_device_unregister(&gsc->v4l2_dev); vb2_dma_contig_cleanup_ctx(gsc->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(&pdev->dev); pm_runtime_disable(&pdev->dev); gsc_clk_put(gsc); diff --git a/drivers/media/platform/exynos4-is/fimc-core.c b/drivers/media/platform/exynos4-is/fimc-core.c index b1c1cea82a27..368f44f24d4c 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.c +++ b/drivers/media/platform/exynos4-is/fimc-core.c @@ -1019,6 +1019,7 @@ static int fimc_probe(struct platform_device *pdev) } /* Initialize contiguous memory allocator */ + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(fimc->alloc_ctx)) { ret = PTR_ERR(fimc->alloc_ctx); @@ -1124,6 +1125,7 @@ static int fimc_remove(struct platform_device *pdev) fimc_unregister_capture_subdev(fimc); vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(&pdev->dev); clk_disable(fimc->clock[CLK_BUS]); fimc_clk_put(fimc); diff --git a/drivers/media/platform/exynos4-is/fimc-is.c b/drivers/media/platform/exynos4-is/fimc-is.c index 979c388ebf60..bd98b56318b7 100644 --- a/drivers/media/platform/exynos4-is/fimc-is.c +++ b/drivers/media/platform/exynos4-is/fimc-is.c @@ -847,6 +847,7 @@ static int fimc_is_probe(struct platform_device *pdev) if (ret < 0) goto err_pm; + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); is->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(is->alloc_ctx)) { ret = PTR_ERR(is->alloc_ctx); @@ -940,6 +941,7 @@ static int fimc_is_remove(struct platform_device *pdev) free_irq(is->irq, is); fimc_is_unregister_subdevs(is); vb2_dma_contig_cleanup_ctx(is->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(dev); fimc_is_put_clocks(is); fimc_is_debugfs_remove(is); release_firmware(is->fw.f_w); diff --git a/drivers/media/platform/exynos4-is/fimc-lite.c b/drivers/media/platform/exynos4-is/fimc-lite.c index dc1b929f7a33..27cb620cb714 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.c +++ b/drivers/media/platform/exynos4-is/fimc-lite.c @@ -1551,6 +1551,7 @@ static int fimc_lite_probe(struct platform_device *pdev) goto err_sd; } + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32)); fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev); if (IS_ERR(fimc->alloc_ctx)) { ret = PTR_ERR(fimc->alloc_ctx); @@ -1652,6 +1653,7 @@ static int fimc_lite_remove(struct platform_device *pdev) pm_runtime_set_suspended(dev); fimc_lite_unregister_capture_subdev(fimc); vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(dev); fimc_lite_clk_put(fimc); dev_info(dev, "Driver unloaded\n"); diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c index 612d1ea514f1..d3e3469db8de 100644 --- a/drivers/media/platform/s5p-g2d/g2d.c +++ b/drivers/media/platform/s5p-g2d/g2d.c @@ -681,6 +681,7 @@ static int g2d_probe(struct platform_device *pdev) goto put_clk_gate; } + vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); if (IS_ERR(dev->alloc_ctx)) { ret = PTR_ERR(dev->alloc_ctx); @@ -757,6 +758,7 @@ static int g2d_remove(struct platform_device *pdev) video_unregister_device(dev->vfd); v4l2_device_unregister(&dev->v4l2_dev); vb2_dma_contig_cleanup_ctx(dev->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(&pdev->dev); clk_unprepare(dev->gate); clk_put(dev->gate); clk_unprepare(dev->clk); diff --git a/drivers/media/platform/s5p-jpeg/jpeg-core.c b/drivers/media/platform/s5p-jpeg/jpeg-core.c index caa19b408551..17bc94092864 100644 --- a/drivers/media/platform/s5p-jpeg/jpeg-core.c +++ b/drivers/media/platform/s5p-jpeg/jpeg-core.c @@ -2843,6 +2843,7 @@ static int s5p_jpeg_probe(struct platform_device *pdev) goto device_register_rollback; } + vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32)); jpeg->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); if (IS_ERR(jpeg->alloc_ctx)) { v4l2_err(&jpeg->v4l2_dev, "Failed to init memory allocator\n"); @@ -2942,6 +2943,7 @@ static int s5p_jpeg_remove(struct platform_device *pdev) video_unregister_device(jpeg->vfd_decoder); video_unregister_device(jpeg->vfd_encoder); vb2_dma_contig_cleanup_ctx(jpeg->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(&pdev->dev); v4l2_m2m_release(jpeg->m2m_dev); v4l2_device_unregister(&jpeg->v4l2_dev); diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index b16466fe35ee..6ee620ee8cd5 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -22,6 +22,7 @@ #include <media/v4l2-event.h> #include <linux/workqueue.h> #include <linux/of.h> +#include <linux/of_reserved_mem.h> #include <media/videobuf2-v4l2.h> #include "s5p_mfc_common.h" #include "s5p_mfc_ctrl.h" @@ -29,6 +30,7 @@ #include "s5p_mfc_dec.h" #include "s5p_mfc_enc.h" #include "s5p_mfc_intr.h" +#include "s5p_mfc_iommu.h" #include "s5p_mfc_opr.h" #include "s5p_mfc_cmd.h" #include "s5p_mfc_pm.h" @@ -1043,55 +1045,94 @@ static const struct v4l2_file_operations s5p_mfc_fops = { .mmap = s5p_mfc_mmap, }; -static int match_child(struct device *dev, void *data) +/* DMA memory related helper functions */ +static void s5p_mfc_memdev_release(struct device *dev) { - if (!dev_name(dev)) - return 0; - return !strcmp(dev_name(dev), (char *)data); + of_reserved_mem_device_release(dev); } -static void *mfc_get_drv_data(struct platform_device *pdev); - -static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev) +static struct device *s5p_mfc_alloc_memdev(struct device *dev, + const char *name, unsigned int idx) { - unsigned int mem_info[2] = { }; + struct device *child; + int ret; - dev->mem_dev_l = devm_kzalloc(&dev->plat_dev->dev, - sizeof(struct device), GFP_KERNEL); - if (!dev->mem_dev_l) { - mfc_err("Not enough memory\n"); - return -ENOMEM; - } - device_initialize(dev->mem_dev_l); - of_property_read_u32_array(dev->plat_dev->dev.of_node, - "samsung,mfc-l", mem_info, 2); - if (dma_declare_coherent_memory(dev->mem_dev_l, mem_info[0], - mem_info[0], mem_info[1], - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) { - mfc_err("Failed to declare coherent memory for\n" - "MFC device\n"); - return -ENOMEM; + child = devm_kzalloc(dev, sizeof(struct device), GFP_KERNEL); + if (!child) + return NULL; + + device_initialize(child); + dev_set_name(child, "%s:%s", dev_name(dev), name); + child->parent = dev; + child->bus = dev->bus; + child->coherent_dma_mask = dev->coherent_dma_mask; + child->dma_mask = dev->dma_mask; + child->release = s5p_mfc_memdev_release; + + if (device_add(child) == 0) { + ret = of_reserved_mem_device_init_by_idx(child, dev->of_node, + idx); + if (ret == 0) + return child; } - dev->mem_dev_r = devm_kzalloc(&dev->plat_dev->dev, - sizeof(struct device), GFP_KERNEL); - if (!dev->mem_dev_r) { - mfc_err("Not enough memory\n"); - return -ENOMEM; + put_device(child); + return NULL; +} + +static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev) +{ + struct device *dev = &mfc_dev->plat_dev->dev; + + /* + * When IOMMU is available, we cannot use the default configuration, + * because of MFC firmware requirements: address space limited to + * 256M and non-zero default start address. + * This is still simplified, not optimal configuration, but for now + * IOMMU core doesn't allow to configure device's IOMMUs channel + * separately. + */ + if (exynos_is_iommu_available(dev)) { + int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE, + S5P_MFC_IOMMU_DMA_SIZE); + if (ret == 0) + mfc_dev->mem_dev_l = mfc_dev->mem_dev_r = dev; + return ret; } - device_initialize(dev->mem_dev_r); - of_property_read_u32_array(dev->plat_dev->dev.of_node, - "samsung,mfc-r", mem_info, 2); - if (dma_declare_coherent_memory(dev->mem_dev_r, mem_info[0], - mem_info[0], mem_info[1], - DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) { - pr_err("Failed to declare coherent memory for\n" - "MFC device\n"); - return -ENOMEM; + + /* + * Create and initialize virtual devices for accessing + * reserved memory regions. + */ + mfc_dev->mem_dev_l = s5p_mfc_alloc_memdev(dev, "left", + MFC_BANK1_ALLOC_CTX); + if (!mfc_dev->mem_dev_l) + return -ENODEV; + mfc_dev->mem_dev_r = s5p_mfc_alloc_memdev(dev, "right", + MFC_BANK2_ALLOC_CTX); + if (!mfc_dev->mem_dev_r) { + device_unregister(mfc_dev->mem_dev_l); + return -ENODEV; } + return 0; } +static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev) +{ + struct device *dev = &mfc_dev->plat_dev->dev; + + if (exynos_is_iommu_available(dev)) { + exynos_unconfigure_iommu(dev); + return; + } + + device_unregister(mfc_dev->mem_dev_l); + device_unregister(mfc_dev->mem_dev_r); +} + +static void *mfc_get_drv_data(struct platform_device *pdev); + /* MFC probe function */ static int s5p_mfc_probe(struct platform_device *pdev) { @@ -1117,12 +1158,6 @@ static int s5p_mfc_probe(struct platform_device *pdev) dev->variant = mfc_get_drv_data(pdev); - ret = s5p_mfc_init_pm(dev); - if (ret < 0) { - dev_err(&pdev->dev, "failed to get mfc clock source\n"); - return ret; - } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); dev->regs_base = devm_ioremap_resource(&pdev->dev, res); @@ -1143,32 +1178,25 @@ static int s5p_mfc_probe(struct platform_device *pdev) goto err_res; } - if (pdev->dev.of_node) { - ret = s5p_mfc_alloc_memdevs(dev); - if (ret < 0) - goto err_res; - } else { - dev->mem_dev_l = device_find_child(&dev->plat_dev->dev, - "s5p-mfc-l", match_child); - if (!dev->mem_dev_l) { - mfc_err("Mem child (L) device get failed\n"); - ret = -ENODEV; - goto err_res; - } - dev->mem_dev_r = device_find_child(&dev->plat_dev->dev, - "s5p-mfc-r", match_child); - if (!dev->mem_dev_r) { - mfc_err("Mem child (R) device get failed\n"); - ret = -ENODEV; - goto err_res; - } + ret = s5p_mfc_configure_dma_memory(dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to configure DMA memory\n"); + return ret; } + ret = s5p_mfc_init_pm(dev); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get mfc clock source\n"); + return ret; + } + + vb2_dma_contig_set_max_seg_size(dev->mem_dev_l, DMA_BIT_MASK(32)); dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l); if (IS_ERR(dev->alloc_ctx[0])) { ret = PTR_ERR(dev->alloc_ctx[0]); goto err_res; } + vb2_dma_contig_set_max_seg_size(dev->mem_dev_r, DMA_BIT_MASK(32)); dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r); if (IS_ERR(dev->alloc_ctx[1])) { ret = PTR_ERR(dev->alloc_ctx[1]); @@ -1201,14 +1229,6 @@ static int s5p_mfc_probe(struct platform_device *pdev) vfd->vfl_dir = VFL_DIR_M2M; snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME); dev->vfd_dec = vfd; - ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); - if (ret) { - v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); - video_device_release(vfd); - goto err_dec_reg; - } - v4l2_info(&dev->v4l2_dev, - "decoder registered as /dev/video%d\n", vfd->num); video_set_drvdata(vfd, dev); /* encoder */ @@ -1226,14 +1246,6 @@ static int s5p_mfc_probe(struct platform_device *pdev) vfd->vfl_dir = VFL_DIR_M2M; snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME); dev->vfd_enc = vfd; - ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0); - if (ret) { - v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); - video_device_release(vfd); - goto err_enc_reg; - } - v4l2_info(&dev->v4l2_dev, - "encoder registered as /dev/video%d\n", vfd->num); video_set_drvdata(vfd, dev); platform_set_drvdata(pdev, dev); @@ -1250,15 +1262,34 @@ static int s5p_mfc_probe(struct platform_device *pdev) s5p_mfc_init_hw_cmds(dev); s5p_mfc_init_regs(dev); + /* Register decoder and encoder */ + ret = video_register_device(dev->vfd_dec, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + video_device_release(dev->vfd_dec); + goto err_dec_reg; + } + v4l2_info(&dev->v4l2_dev, + "decoder registered as /dev/video%d\n", dev->vfd_dec->num); + + ret = video_register_device(dev->vfd_enc, VFL_TYPE_GRABBER, 0); + if (ret) { + v4l2_err(&dev->v4l2_dev, "Failed to register video device\n"); + video_device_release(dev->vfd_enc); + goto err_enc_reg; + } + v4l2_info(&dev->v4l2_dev, + "encoder registered as /dev/video%d\n", dev->vfd_enc->num); + pr_debug("%s--\n", __func__); return 0; /* Deinit MFC if probe had failed */ err_enc_reg: - video_device_release(dev->vfd_enc); -err_enc_alloc: video_unregister_device(dev->vfd_dec); err_dec_reg: + video_device_release(dev->vfd_enc); +err_enc_alloc: video_device_release(dev->vfd_dec); err_dec_alloc: v4l2_device_unregister(&dev->v4l2_dev); @@ -1293,10 +1324,9 @@ static int s5p_mfc_remove(struct platform_device *pdev) s5p_mfc_release_firmware(dev); vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]); vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]); - if (pdev->dev.of_node) { - put_device(dev->mem_dev_l); - put_device(dev->mem_dev_r); - } + s5p_mfc_unconfigure_dma_memory(dev); + vb2_dma_contig_clear_max_seg_size(dev->mem_dev_l); + vb2_dma_contig_clear_max_seg_size(dev->mem_dev_r); s5p_mfc_final_pm(dev); return 0; diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h new file mode 100644 index 000000000000..5d1d1c2922e8 --- /dev/null +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_iommu.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2015 Samsung Electronics Co.Ltd + * Authors: Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef S5P_MFC_IOMMU_H_ +#define S5P_MFC_IOMMU_H_ + +#define S5P_MFC_IOMMU_DMA_BASE 0x20000000lu +#define S5P_MFC_IOMMU_DMA_SIZE SZ_256M + +#ifdef CONFIG_EXYNOS_IOMMU + +#include <asm/dma-iommu.h> + +static inline bool exynos_is_iommu_available(struct device *dev) +{ + return dev->archdata.iommu != NULL; +} + +static inline void exynos_unconfigure_iommu(struct device *dev) +{ + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + + arm_iommu_detach_device(dev); + arm_iommu_release_mapping(mapping); +} + +static inline int exynos_configure_iommu(struct device *dev, + unsigned int base, unsigned int size) +{ + struct dma_iommu_mapping *mapping = NULL; + int ret; + + /* Disable the default mapping created by device core */ + if (to_dma_iommu_mapping(dev)) + exynos_unconfigure_iommu(dev); + + mapping = arm_iommu_create_mapping(dev->bus, base, size); + if (IS_ERR(mapping)) { + pr_warn("Failed to create IOMMU mapping for device %s\n", + dev_name(dev)); + return PTR_ERR(mapping); + } + + ret = arm_iommu_attach_device(dev, mapping); + if (ret) { + pr_warn("Failed to attached device %s to IOMMU_mapping\n", + dev_name(dev)); + arm_iommu_release_mapping(mapping); + return ret; + } + + return 0; +} + +#else + +static inline bool exynos_is_iommu_available(struct device *dev) +{ + return false; +} + +static inline int exynos_configure_iommu(struct device *dev, + unsigned int base, unsigned int size) +{ + return -ENOSYS; +} + +static inline void exynos_unconfigure_iommu(struct device *dev) { } + +#endif + +#endif /* S5P_MFC_IOMMU_H_ */ diff --git a/drivers/media/platform/s5p-tv/mixer_video.c b/drivers/media/platform/s5p-tv/mixer_video.c index 7ab5578a0405..123d27107f60 100644 --- a/drivers/media/platform/s5p-tv/mixer_video.c +++ b/drivers/media/platform/s5p-tv/mixer_video.c @@ -80,6 +80,7 @@ int mxr_acquire_video(struct mxr_device *mdev, goto fail; } + vb2_dma_contig_set_max_seg_size(mdev->dev, DMA_BIT_MASK(32)); mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev); if (IS_ERR(mdev->alloc_ctx)) { mxr_err(mdev, "could not acquire vb2 allocator\n"); @@ -152,6 +153,7 @@ void mxr_release_video(struct mxr_device *mdev) kfree(mdev->output[i]); vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx); + vb2_dma_contig_clear_max_seg_size(mdev->dev); v4l2_device_unregister(&mdev->v4l2_dev); } diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c index 5361197f3e57..e3e47ace7daf 100644 --- a/drivers/media/v4l2-core/videobuf2-dma-contig.c +++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c @@ -753,6 +753,59 @@ void vb2_dma_contig_cleanup_ctx(void *alloc_ctx) } EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx); +/** + * vb2_dma_contig_set_max_seg_size() - configure DMA max segment size + * @dev: device for configuring DMA parameters + * @size: size of DMA max segment size to set + * + * To allow mapping the scatter-list into a single chunk in the DMA + * address space, the device is required to have the DMA max segment + * size parameter set to a value larger than the buffer size. Otherwise, + * the DMA-mapping subsystem will split the mapping into max segment + * size chunks. This function sets the DMA max segment size + * parameter to let DMA-mapping map a buffer as a single chunk in DMA + * address space. + * This code assumes that the DMA-mapping subsystem will merge all + * scatterlist segments if this is really possible (for example when + * an IOMMU is available and enabled). + * Ideally, this parameter should be set by the generic bus code, but it + * is left with the default 64KiB value due to historical litmiations in + * other subsystems (like limited USB host drivers) and there no good + * place to set it to the proper value. + * This function should be called from the drivers, which are known to + * operate on platforms with IOMMU and provide access to shared buffers + * (either USERPTR or DMABUF). This should be done before initializing + * videobuf2 queue. + */ +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size) +{ + if (!dev->dma_parms) { + dev->dma_parms = kzalloc(sizeof(dev->dma_parms), GFP_KERNEL); + if (!dev->dma_parms) + return -ENOMEM; + } + if (dma_get_max_seg_size(dev) < size) + return dma_set_max_seg_size(dev, size); + + return 0; +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size); + +/* + * vb2_dma_contig_clear_max_seg_size() - release resources for DMA parameters + * @dev: device for configuring DMA parameters + * + * This function releases resources allocated to configure DMA parameters + * (see vb2_dma_contig_set_max_seg_size() function). It should be called from + * device drivers on driver remove. + */ +void vb2_dma_contig_clear_max_seg_size(struct device *dev) +{ + kfree(dev->dma_parms); + dev->dma_parms = NULL; +} +EXPORT_SYMBOL_GPL(vb2_dma_contig_clear_max_seg_size); + MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2"); MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>"); MODULE_LICENSE("GPL"); diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 81ddb17575a9..133712346911 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -25,6 +25,17 @@ config ATMEL_SDRAMC Starting with the at91sam9g45, this controller supports SDR, DDR and LP-DDR memories. +config ATMEL_EBI + bool "Atmel EBI driver" + default y + depends on ARCH_AT91 && OF + select MFD_SYSCON + help + Driver for Atmel EBI controller. + Used to configure the EBI (external bus interface) when the device- + tree is used. This bus supports NANDs, external ethernet controller, + SRAMs, ATA devices, etc. + config TI_AEMIF tristate "Texas Instruments AEMIF driver" depends on (ARCH_DAVINCI || ARCH_KEYSTONE) && OF diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index cb0b7a1df11a..b20ae38b5bfb 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_OF) += of_memory.o endif obj-$(CONFIG_ARM_PL172_MPMC) += pl172.o obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o +obj-$(CONFIG_ATMEL_EBI) += atmel-ebi.o obj-$(CONFIG_TI_AEMIF) += ti-aemif.o obj-$(CONFIG_TI_EMIF) += emif.o obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o diff --git a/drivers/memory/atmel-ebi.c b/drivers/memory/atmel-ebi.c new file mode 100644 index 000000000000..f87ad6f5d2dc --- /dev/null +++ b/drivers/memory/atmel-ebi.c @@ -0,0 +1,766 @@ +/* + * EBI driver for Atmel chips + * inspired by the fsl weim bus driver + * + * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/atmel-matrix.h> +#include <linux/mfd/syscon/atmel-smc.h> +#include <linux/init.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +struct at91sam9_smc_timings { + u32 ncs_rd_setup_ns; + u32 nrd_setup_ns; + u32 ncs_wr_setup_ns; + u32 nwe_setup_ns; + u32 ncs_rd_pulse_ns; + u32 nrd_pulse_ns; + u32 ncs_wr_pulse_ns; + u32 nwe_pulse_ns; + u32 nrd_cycle_ns; + u32 nwe_cycle_ns; + u32 tdf_ns; +}; + +struct at91sam9_smc_generic_fields { + struct regmap_field *setup; + struct regmap_field *pulse; + struct regmap_field *cycle; + struct regmap_field *mode; +}; + +struct at91sam9_ebi_dev_config { + struct at91sam9_smc_timings timings; + u32 mode; +}; + +struct at91_ebi_dev_config { + int cs; + union { + struct at91sam9_ebi_dev_config sam9; + }; +}; + +struct at91_ebi; + +struct at91_ebi_dev { + struct list_head node; + struct at91_ebi *ebi; + u32 mode; + int numcs; + struct at91_ebi_dev_config configs[]; +}; + +struct at91_ebi_caps { + unsigned int available_cs; + const struct reg_field *ebi_csa; + void (*get_config)(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf); + int (*xlate_config)(struct at91_ebi_dev *ebid, + struct device_node *configs_np, + struct at91_ebi_dev_config *conf); + int (*apply_config)(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf); + int (*init)(struct at91_ebi *ebi); +}; + +struct at91_ebi { + struct clk *clk; + struct regmap *smc; + struct regmap *matrix; + + struct regmap_field *ebi_csa; + + struct device *dev; + const struct at91_ebi_caps *caps; + struct list_head devs; + union { + struct at91sam9_smc_generic_fields sam9; + }; +}; + +static void at91sam9_ebi_get_config(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf) +{ + struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9; + unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); + struct at91sam9_ebi_dev_config *config = &conf->sam9; + struct at91sam9_smc_timings *timings = &config->timings; + unsigned int val; + + regmap_fields_read(fields->mode, conf->cs, &val); + config->mode = val & ~AT91_SMC_TDF; + + val = (val & AT91_SMC_TDF) >> 16; + timings->tdf_ns = clk_rate * val; + + regmap_fields_read(fields->setup, conf->cs, &val); + timings->ncs_rd_setup_ns = (val >> 24) & 0x1f; + timings->ncs_rd_setup_ns += ((val >> 29) & 0x1) * 128; + timings->ncs_rd_setup_ns *= clk_rate; + timings->nrd_setup_ns = (val >> 16) & 0x1f; + timings->nrd_setup_ns += ((val >> 21) & 0x1) * 128; + timings->nrd_setup_ns *= clk_rate; + timings->ncs_wr_setup_ns = (val >> 8) & 0x1f; + timings->ncs_wr_setup_ns += ((val >> 13) & 0x1) * 128; + timings->ncs_wr_setup_ns *= clk_rate; + timings->nwe_setup_ns = val & 0x1f; + timings->nwe_setup_ns += ((val >> 5) & 0x1) * 128; + timings->nwe_setup_ns *= clk_rate; + + regmap_fields_read(fields->pulse, conf->cs, &val); + timings->ncs_rd_pulse_ns = (val >> 24) & 0x3f; + timings->ncs_rd_pulse_ns += ((val >> 30) & 0x1) * 256; + timings->ncs_rd_pulse_ns *= clk_rate; + timings->nrd_pulse_ns = (val >> 16) & 0x3f; + timings->nrd_pulse_ns += ((val >> 22) & 0x1) * 256; + timings->nrd_pulse_ns *= clk_rate; + timings->ncs_wr_pulse_ns = (val >> 8) & 0x3f; + timings->ncs_wr_pulse_ns += ((val >> 14) & 0x1) * 256; + timings->ncs_wr_pulse_ns *= clk_rate; + timings->nwe_pulse_ns = val & 0x3f; + timings->nwe_pulse_ns += ((val >> 6) & 0x1) * 256; + timings->nwe_pulse_ns *= clk_rate; + + regmap_fields_read(fields->cycle, conf->cs, &val); + timings->nrd_cycle_ns = (val >> 16) & 0x7f; + timings->nrd_cycle_ns += ((val >> 23) & 0x3) * 256; + timings->nrd_cycle_ns *= clk_rate; + timings->nwe_cycle_ns = val & 0x7f; + timings->nwe_cycle_ns += ((val >> 7) & 0x3) * 256; + timings->nwe_cycle_ns *= clk_rate; +} + +static int at91_xlate_timing(struct device_node *np, const char *prop, + u32 *val, bool *required) +{ + if (!of_property_read_u32(np, prop, val)) { + *required = true; + return 0; + } + + if (*required) + return -EINVAL; + + return 0; +} + +static int at91sam9_smc_xslate_timings(struct at91_ebi_dev *ebid, + struct device_node *np, + struct at91sam9_smc_timings *timings, + bool *required) +{ + int ret; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-setup-ns", + &timings->ncs_rd_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-setup-ns", + &timings->nrd_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-setup-ns", + &timings->ncs_wr_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-setup-ns", + &timings->nwe_setup_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-rd-pulse-ns", + &timings->ncs_rd_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-pulse-ns", + &timings->nrd_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-ncs-wr-pulse-ns", + &timings->ncs_wr_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-pulse-ns", + &timings->nwe_pulse_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nwe-cycle-ns", + &timings->nwe_cycle_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-nrd-cycle-ns", + &timings->nrd_cycle_ns, required); + if (ret) + goto out; + + ret = at91_xlate_timing(np, "atmel,smc-tdf-ns", + &timings->tdf_ns, required); + +out: + if (ret) + dev_err(ebid->ebi->dev, + "missing or invalid timings definition in %s", + np->full_name); + + return ret; +} + +static int at91sam9_ebi_xslate_config(struct at91_ebi_dev *ebid, + struct device_node *np, + struct at91_ebi_dev_config *conf) +{ + struct at91sam9_ebi_dev_config *config = &conf->sam9; + bool required = false; + const char *tmp_str; + u32 tmp; + int ret; + + ret = of_property_read_u32(np, "atmel,smc-bus-width", &tmp); + if (!ret) { + switch (tmp) { + case 8: + config->mode |= AT91_SMC_DBW_8; + break; + + case 16: + config->mode |= AT91_SMC_DBW_16; + break; + + case 32: + config->mode |= AT91_SMC_DBW_32; + break; + + default: + return -EINVAL; + } + + required = true; + } + + if (of_property_read_bool(np, "atmel,smc-tdf-optimized")) { + config->mode |= AT91_SMC_TDFMODE_OPTIMIZED; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-byte-access-type", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "write")) { + config->mode |= AT91_SMC_BAT_WRITE; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-read-mode", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "nrd")) { + config->mode |= AT91_SMC_READMODE_NRD; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-write-mode", &tmp_str); + if (tmp_str && !strcmp(tmp_str, "nwe")) { + config->mode |= AT91_SMC_WRITEMODE_NWE; + required = true; + } + + tmp_str = NULL; + of_property_read_string(np, "atmel,smc-exnw-mode", &tmp_str); + if (tmp_str) { + if (!strcmp(tmp_str, "frozen")) + config->mode |= AT91_SMC_EXNWMODE_FROZEN; + else if (!strcmp(tmp_str, "ready")) + config->mode |= AT91_SMC_EXNWMODE_READY; + else if (strcmp(tmp_str, "disabled")) + return -EINVAL; + + required = true; + } + + ret = of_property_read_u32(np, "atmel,smc-page-mode", &tmp); + if (!ret) { + switch (tmp) { + case 4: + config->mode |= AT91_SMC_PS_4; + break; + + case 8: + config->mode |= AT91_SMC_PS_8; + break; + + case 16: + config->mode |= AT91_SMC_PS_16; + break; + + case 32: + config->mode |= AT91_SMC_PS_32; + break; + + default: + return -EINVAL; + } + + config->mode |= AT91_SMC_PMEN; + required = true; + } + + ret = at91sam9_smc_xslate_timings(ebid, np, &config->timings, + &required); + if (ret) + return ret; + + return required; +} + +static int at91sam9_ebi_apply_config(struct at91_ebi_dev *ebid, + struct at91_ebi_dev_config *conf) +{ + unsigned int clk_rate = clk_get_rate(ebid->ebi->clk); + struct at91sam9_ebi_dev_config *config = &conf->sam9; + struct at91sam9_smc_timings *timings = &config->timings; + struct at91sam9_smc_generic_fields *fields = &ebid->ebi->sam9; + u32 coded_val; + u32 val; + + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->ncs_rd_setup_ns); + val = AT91SAM9_SMC_NCS_NRDSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->nrd_setup_ns); + val |= AT91SAM9_SMC_NRDSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->ncs_wr_setup_ns); + val |= AT91SAM9_SMC_NCS_WRSETUP(coded_val); + coded_val = at91sam9_smc_setup_ns_to_cycles(clk_rate, + timings->nwe_setup_ns); + val |= AT91SAM9_SMC_NWESETUP(coded_val); + regmap_fields_write(fields->setup, conf->cs, val); + + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->ncs_rd_pulse_ns); + val = AT91SAM9_SMC_NCS_NRDPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->nrd_pulse_ns); + val |= AT91SAM9_SMC_NRDPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->ncs_wr_pulse_ns); + val |= AT91SAM9_SMC_NCS_WRPULSE(coded_val); + coded_val = at91sam9_smc_pulse_ns_to_cycles(clk_rate, + timings->nwe_pulse_ns); + val |= AT91SAM9_SMC_NWEPULSE(coded_val); + regmap_fields_write(fields->pulse, conf->cs, val); + + coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate, + timings->nrd_cycle_ns); + val = AT91SAM9_SMC_NRDCYCLE(coded_val); + coded_val = at91sam9_smc_cycle_ns_to_cycles(clk_rate, + timings->nwe_cycle_ns); + val |= AT91SAM9_SMC_NWECYCLE(coded_val); + regmap_fields_write(fields->cycle, conf->cs, val); + + val = DIV_ROUND_UP(timings->tdf_ns, clk_rate); + if (val > AT91_SMC_TDF_MAX) + val = AT91_SMC_TDF_MAX; + regmap_fields_write(fields->mode, conf->cs, + config->mode | AT91_SMC_TDF_(val)); + + return 0; +} + +static int at91sam9_ebi_init(struct at91_ebi *ebi) +{ + struct at91sam9_smc_generic_fields *fields = &ebi->sam9; + struct reg_field field = REG_FIELD(0, 0, 31); + + field.id_size = fls(ebi->caps->available_cs); + field.id_offset = AT91SAM9_SMC_GENERIC_BLK_SZ; + + field.reg = AT91SAM9_SMC_SETUP(AT91SAM9_SMC_GENERIC); + fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->setup)) + return PTR_ERR(fields->setup); + + field.reg = AT91SAM9_SMC_PULSE(AT91SAM9_SMC_GENERIC); + fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->pulse)) + return PTR_ERR(fields->pulse); + + field.reg = AT91SAM9_SMC_CYCLE(AT91SAM9_SMC_GENERIC); + fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->cycle)) + return PTR_ERR(fields->cycle); + + field.reg = AT91SAM9_SMC_MODE(AT91SAM9_SMC_GENERIC); + fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->mode)) + return PTR_ERR(fields->mode); + + return 0; +} + +static int sama5d3_ebi_init(struct at91_ebi *ebi) +{ + struct at91sam9_smc_generic_fields *fields = &ebi->sam9; + struct reg_field field = REG_FIELD(0, 0, 31); + + field.id_size = fls(ebi->caps->available_cs); + field.id_offset = SAMA5_SMC_GENERIC_BLK_SZ; + + field.reg = AT91SAM9_SMC_SETUP(SAMA5_SMC_GENERIC); + fields->setup = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->setup)) + return PTR_ERR(fields->setup); + + field.reg = AT91SAM9_SMC_PULSE(SAMA5_SMC_GENERIC); + fields->pulse = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->pulse)) + return PTR_ERR(fields->pulse); + + field.reg = AT91SAM9_SMC_CYCLE(SAMA5_SMC_GENERIC); + fields->cycle = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->cycle)) + return PTR_ERR(fields->cycle); + + field.reg = SAMA5_SMC_MODE(SAMA5_SMC_GENERIC); + fields->mode = devm_regmap_field_alloc(ebi->dev, ebi->smc, field); + if (IS_ERR(fields->mode)) + return PTR_ERR(fields->mode); + + return 0; +} + +static int at91_ebi_dev_setup(struct at91_ebi *ebi, struct device_node *np, + int reg_cells) +{ + const struct at91_ebi_caps *caps = ebi->caps; + struct at91_ebi_dev_config conf = { }; + struct device *dev = ebi->dev; + struct at91_ebi_dev *ebid; + int ret, numcs = 0, i; + bool apply = false; + + numcs = of_property_count_elems_of_size(np, "reg", + reg_cells * sizeof(u32)); + if (numcs <= 0) { + dev_err(dev, "invalid reg property in %s\n", np->full_name); + return -EINVAL; + } + + ebid = devm_kzalloc(ebi->dev, + sizeof(*ebid) + (numcs * sizeof(*ebid->configs)), + GFP_KERNEL); + if (!ebid) + return -ENOMEM; + + ebid->ebi = ebi; + + ret = caps->xlate_config(ebid, np, &conf); + if (ret < 0) + return ret; + else if (ret) + apply = true; + + for (i = 0; i < numcs; i++) { + u32 cs; + + ret = of_property_read_u32_index(np, "reg", i * reg_cells, + &cs); + if (ret) + return ret; + + if (cs > AT91_MATRIX_EBI_NUM_CS || + !(ebi->caps->available_cs & BIT(cs))) { + dev_err(dev, "invalid reg property in %s\n", + np->full_name); + return -EINVAL; + } + + ebid->configs[i].cs = cs; + + if (apply) { + conf.cs = cs; + ret = caps->apply_config(ebid, &conf); + if (ret) + return ret; + } + + caps->get_config(ebid, &ebid->configs[i]); + + /* + * Attach the EBI device to the generic SMC logic if at least + * one "atmel,smc-" property is present. + */ + if (ebi->ebi_csa && ret) + regmap_field_update_bits(ebi->ebi_csa, + BIT(cs), 0); + } + + list_add_tail(&ebid->node, &ebi->devs); + + return 0; +} + +static const struct reg_field at91sam9260_ebi_csa = + REG_FIELD(AT91SAM9260_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9260_ebi_caps = { + .available_cs = 0xff, + .ebi_csa = &at91sam9260_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9261_ebi_csa = + REG_FIELD(AT91SAM9261_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9261_ebi_caps = { + .available_cs = 0xff, + .ebi_csa = &at91sam9261_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9263_ebi0_csa = + REG_FIELD(AT91SAM9263_MATRIX_EBI0CSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9263_ebi0_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9263_ebi0_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9263_ebi1_csa = + REG_FIELD(AT91SAM9263_MATRIX_EBI1CSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9263_ebi1_caps = { + .available_cs = 0x7, + .ebi_csa = &at91sam9263_ebi1_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9rl_ebi_csa = + REG_FIELD(AT91SAM9RL_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9rl_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9rl_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct reg_field at91sam9g45_ebi_csa = + REG_FIELD(AT91SAM9G45_MATRIX_EBICSA, 0, + AT91_MATRIX_EBI_NUM_CS - 1); + +static const struct at91_ebi_caps at91sam9g45_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9g45_ebi_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct at91_ebi_caps at91sam9x5_ebi_caps = { + .available_cs = 0x3f, + .ebi_csa = &at91sam9263_ebi0_csa, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = at91sam9_ebi_init, +}; + +static const struct at91_ebi_caps sama5d3_ebi_caps = { + .available_cs = 0xf, + .get_config = at91sam9_ebi_get_config, + .xlate_config = at91sam9_ebi_xslate_config, + .apply_config = at91sam9_ebi_apply_config, + .init = sama5d3_ebi_init, +}; + +static const struct of_device_id at91_ebi_id_table[] = { + { + .compatible = "atmel,at91sam9260-ebi", + .data = &at91sam9260_ebi_caps, + }, + { + .compatible = "atmel,at91sam9261-ebi", + .data = &at91sam9261_ebi_caps, + }, + { + .compatible = "atmel,at91sam9263-ebi0", + .data = &at91sam9263_ebi0_caps, + }, + { + .compatible = "atmel,at91sam9263-ebi1", + .data = &at91sam9263_ebi1_caps, + }, + { + .compatible = "atmel,at91sam9rl-ebi", + .data = &at91sam9rl_ebi_caps, + }, + { + .compatible = "atmel,at91sam9g45-ebi", + .data = &at91sam9g45_ebi_caps, + }, + { + .compatible = "atmel,at91sam9x5-ebi", + .data = &at91sam9x5_ebi_caps, + }, + { + .compatible = "atmel,sama5d3-ebi", + .data = &sama5d3_ebi_caps, + }, + { /* sentinel */ } +}; + +static int at91_ebi_dev_disable(struct at91_ebi *ebi, struct device_node *np) +{ + struct device *dev = ebi->dev; + struct property *newprop; + + newprop = devm_kzalloc(dev, sizeof(*newprop), GFP_KERNEL); + if (!newprop) + return -ENOMEM; + + newprop->name = devm_kstrdup(dev, "status", GFP_KERNEL); + if (!newprop->name) + return -ENOMEM; + + newprop->value = devm_kstrdup(dev, "disabled", GFP_KERNEL); + if (!newprop->name) + return -ENOMEM; + + newprop->length = sizeof("disabled"); + + return of_update_property(np, newprop); +} + +static int at91_ebi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child, *np = dev->of_node; + const struct of_device_id *match; + struct at91_ebi *ebi; + int ret, reg_cells; + struct clk *clk; + u32 val; + + match = of_match_device(at91_ebi_id_table, dev); + if (!match || !match->data) + return -EINVAL; + + ebi = devm_kzalloc(dev, sizeof(*ebi), GFP_KERNEL); + if (!ebi) + return -ENOMEM; + + INIT_LIST_HEAD(&ebi->devs); + ebi->caps = match->data; + ebi->dev = dev; + + clk = devm_clk_get(dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ebi->clk = clk; + + ebi->smc = syscon_regmap_lookup_by_phandle(np, "atmel,smc"); + if (IS_ERR(ebi->smc)) + return PTR_ERR(ebi->smc); + + /* + * The sama5d3 does not provide an EBICSA register and thus does need + * to access the matrix registers. + */ + if (ebi->caps->ebi_csa) { + ebi->matrix = + syscon_regmap_lookup_by_phandle(np, "atmel,matrix"); + if (IS_ERR(ebi->matrix)) + return PTR_ERR(ebi->matrix); + + ebi->ebi_csa = regmap_field_alloc(ebi->matrix, + *ebi->caps->ebi_csa); + if (IS_ERR(ebi->ebi_csa)) + return PTR_ERR(ebi->ebi_csa); + } + + ret = ebi->caps->init(ebi); + if (ret) + return ret; + + ret = of_property_read_u32(np, "#address-cells", &val); + if (ret) { + dev_err(dev, "missing #address-cells property\n"); + return ret; + } + + reg_cells = val; + + ret = of_property_read_u32(np, "#size-cells", &val); + if (ret) { + dev_err(dev, "missing #address-cells property\n"); + return ret; + } + + reg_cells += val; + + for_each_available_child_of_node(np, child) { + if (!of_find_property(child, "reg", NULL)) + continue; + + ret = at91_ebi_dev_setup(ebi, child, reg_cells); + if (ret) { + dev_err(dev, "failed to configure EBI bus for %s, disabling the device", + child->full_name); + + ret = at91_ebi_dev_disable(ebi, child); + if (ret) + return ret; + } + } + + return of_platform_populate(np, NULL, NULL, dev); +} + +static struct platform_driver at91_ebi_driver = { + .driver = { + .name = "atmel-ebi", + .of_match_table = at91_ebi_id_table, + }, +}; +builtin_platform_driver_probe(at91_ebi_driver, at91_ebi_probe); diff --git a/drivers/memory/atmel-sdramc.c b/drivers/memory/atmel-sdramc.c index a3ebc8a87479..53a341f3b305 100644 --- a/drivers/memory/atmel-sdramc.c +++ b/drivers/memory/atmel-sdramc.c @@ -1,6 +1,8 @@ /* * Atmel (Multi-port DDR-)SDRAM Controller driver * + * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com> + * * Copyright (C) 2014 Atmel * * This program is free software: you can redistribute it and/or modify @@ -20,7 +22,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/kernel.h> -#include <linux/module.h> +#include <linux/init.h> #include <linux/of_platform.h> #include <linux/platform_device.h> @@ -48,7 +50,6 @@ static const struct of_device_id atmel_ramc_of_match[] = { { .compatible = "atmel,sama5d3-ddramc", .data = &sama5d3_caps, }, {}, }; -MODULE_DEVICE_TABLE(of, atmel_ramc_of_match); static int atmel_ramc_probe(struct platform_device *pdev) { @@ -90,8 +91,4 @@ static int __init atmel_ramc_init(void) { return platform_driver_register(&atmel_ramc_driver); } -module_init(atmel_ramc_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@free-electrons.com>"); -MODULE_DESCRIPTION("Atmel (Multi-port DDR-)SDRAM Controller"); +device_initcall(atmel_ramc_init); diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index af4884ba6b7c..21829880478f 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -20,7 +20,6 @@ #include <linux/ioport.h> #include <linux/spinlock.h> #include <linux/io.h> -#include <linux/module.h> #include <linux/gpio/driver.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> @@ -1807,7 +1806,6 @@ static const struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,am3352-gpmc" }, /* am335x devices */ { } }; -MODULE_DEVICE_TABLE(of, gpmc_dt_ids); /** * gpmc_read_settings_dt - read gpmc settings from device-tree @@ -2155,68 +2153,6 @@ err: return ret; } -static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) -{ - return 1; /* we're input only */ -} - -static int gpmc_gpio_direction_input(struct gpio_chip *chip, - unsigned int offset) -{ - return 0; /* we're input only */ -} - -static int gpmc_gpio_direction_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - return -EINVAL; /* we're input only */ -} - -static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ -} - -static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset) -{ - u32 reg; - - offset += 8; - - reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset); - - return !!reg; -} - -static int gpmc_gpio_init(struct gpmc_device *gpmc) -{ - int ret; - - gpmc->gpio_chip.parent = gpmc->dev; - gpmc->gpio_chip.owner = THIS_MODULE; - gpmc->gpio_chip.label = DEVICE_NAME; - gpmc->gpio_chip.ngpio = gpmc_nr_waitpins; - gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction; - gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input; - gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output; - gpmc->gpio_chip.set = gpmc_gpio_set; - gpmc->gpio_chip.get = gpmc_gpio_get; - gpmc->gpio_chip.base = -1; - - ret = gpiochip_add(&gpmc->gpio_chip); - if (ret < 0) { - dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret); - return ret; - } - - return 0; -} - -static void gpmc_gpio_exit(struct gpmc_device *gpmc) -{ - gpiochip_remove(&gpmc->gpio_chip); -} - static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -2281,7 +2217,69 @@ static int gpmc_probe_dt_children(struct platform_device *pdev) { return 0; } -#endif +#endif /* CONFIG_OF */ + +static int gpmc_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + return 1; /* we're input only */ +} + +static int gpmc_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + return 0; /* we're input only */ +} + +static int gpmc_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + return -EINVAL; /* we're input only */ +} + +static void gpmc_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ +} + +static int gpmc_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + u32 reg; + + offset += 8; + + reg = gpmc_read_reg(GPMC_STATUS) & BIT(offset); + + return !!reg; +} + +static int gpmc_gpio_init(struct gpmc_device *gpmc) +{ + int ret; + + gpmc->gpio_chip.parent = gpmc->dev; + gpmc->gpio_chip.owner = THIS_MODULE; + gpmc->gpio_chip.label = DEVICE_NAME; + gpmc->gpio_chip.ngpio = gpmc_nr_waitpins; + gpmc->gpio_chip.get_direction = gpmc_gpio_get_direction; + gpmc->gpio_chip.direction_input = gpmc_gpio_direction_input; + gpmc->gpio_chip.direction_output = gpmc_gpio_direction_output; + gpmc->gpio_chip.set = gpmc_gpio_set; + gpmc->gpio_chip.get = gpmc_gpio_get; + gpmc->gpio_chip.base = -1; + + ret = gpiochip_add(&gpmc->gpio_chip); + if (ret < 0) { + dev_err(gpmc->dev, "could not register gpio chip: %d\n", ret); + return ret; + } + + return 0; +} + +static void gpmc_gpio_exit(struct gpmc_device *gpmc) +{ + gpiochip_remove(&gpmc->gpio_chip); +} static int gpmc_probe(struct platform_device *pdev) { @@ -2437,15 +2435,7 @@ static __init int gpmc_init(void) { return platform_driver_register(&gpmc_driver); } - -static __exit void gpmc_exit(void) -{ - platform_driver_unregister(&gpmc_driver); - -} - postcore_initcall(gpmc_init); -module_exit(gpmc_exit); static struct omap3_gpmc_regs gpmc_context; diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c index ed01c0172e4a..04e4fe58fb0c 100644 --- a/drivers/of/of_reserved_mem.c +++ b/drivers/of/of_reserved_mem.c @@ -21,6 +21,7 @@ #include <linux/sizes.h> #include <linux/of_reserved_mem.h> #include <linux/sort.h> +#include <linux/slab.h> #define MAX_RESERVED_REGIONS 16 static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS]; @@ -289,53 +290,95 @@ static inline struct reserved_mem *__find_rmem(struct device_node *node) return NULL; } +struct rmem_assigned_device { + struct device *dev; + struct reserved_mem *rmem; + struct list_head list; +}; + +static LIST_HEAD(of_rmem_assigned_device_list); +static DEFINE_MUTEX(of_rmem_assigned_device_mutex); + /** - * of_reserved_mem_device_init() - assign reserved memory region to given device + * of_reserved_mem_device_init_by_idx() - assign reserved memory region to + * given device + * @dev: Pointer to the device to configure + * @np: Pointer to the device_node with 'reserved-memory' property + * @idx: Index of selected region * - * This function assign memory region pointed by "memory-region" device tree - * property to the given device. + * This function assigns respective DMA-mapping operations based on reserved + * memory region specified by 'memory-region' property in @np node to the @dev + * device. When driver needs to use more than one reserved memory region, it + * should allocate child devices and initialize regions by name for each of + * child device. + * + * Returns error code or zero on success. */ -int of_reserved_mem_device_init(struct device *dev) +int of_reserved_mem_device_init_by_idx(struct device *dev, + struct device_node *np, int idx) { + struct rmem_assigned_device *rd; + struct device_node *target; struct reserved_mem *rmem; - struct device_node *np; int ret; - np = of_parse_phandle(dev->of_node, "memory-region", 0); - if (!np) - return -ENODEV; + if (!np || !dev) + return -EINVAL; + + target = of_parse_phandle(np, "memory-region", idx); + if (!target) + return -EINVAL; - rmem = __find_rmem(np); - of_node_put(np); + rmem = __find_rmem(target); + of_node_put(target); if (!rmem || !rmem->ops || !rmem->ops->device_init) return -EINVAL; + rd = kmalloc(sizeof(struct rmem_assigned_device), GFP_KERNEL); + if (!rd) + return -ENOMEM; + ret = rmem->ops->device_init(rmem, dev); - if (ret == 0) + if (ret == 0) { + rd->dev = dev; + rd->rmem = rmem; + + mutex_lock(&of_rmem_assigned_device_mutex); + list_add(&rd->list, &of_rmem_assigned_device_list); + mutex_unlock(&of_rmem_assigned_device_mutex); + dev_info(dev, "assigned reserved memory node %s\n", rmem->name); + } else { + kfree(rd); + } return ret; } -EXPORT_SYMBOL_GPL(of_reserved_mem_device_init); +EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_idx); /** * of_reserved_mem_device_release() - release reserved memory device structures + * @dev: Pointer to the device to deconfigure * * This function releases structures allocated for memory region handling for * the given device. */ void of_reserved_mem_device_release(struct device *dev) { - struct reserved_mem *rmem; - struct device_node *np; - - np = of_parse_phandle(dev->of_node, "memory-region", 0); - if (!np) - return; - - rmem = __find_rmem(np); - of_node_put(np); + struct rmem_assigned_device *rd; + struct reserved_mem *rmem = NULL; + + mutex_lock(&of_rmem_assigned_device_mutex); + list_for_each_entry(rd, &of_rmem_assigned_device_list, list) { + if (rd->dev == dev) { + rmem = rd->rmem; + list_del(&rd->list); + kfree(rd); + break; + } + } + mutex_unlock(&of_rmem_assigned_device_mutex); if (!rmem || !rmem->ops || !rmem->ops->device_release) return; diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 9bb2622c23bf..f38ac90f1aa5 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -46,6 +46,16 @@ config POWER_RESET_AXXIA Say Y if you have an Axxia family SoC. +config POWER_RESET_BRCMKONA + bool "Broadcom Kona reset driver" + depends on ARM || COMPILE_TEST + default ARCH_BCM_MOBILE + help + This driver provides restart support for Broadcom Kona chips. + + Say Y here if you have a Broadcom Kona-based board and you wish + to have restart support. + config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index ab7aa8614d1f..6b6eeb3b4d7f 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o +obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c new file mode 100644 index 000000000000..8eaa959d8be6 --- /dev/null +++ b/drivers/power/reset/brcm-kona-reset.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/reboot.h> + +#define RSTMGR_REG_WR_ACCESS_OFFSET 0 +#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4 + +#define RSTMGR_WR_PASSWORD 0xa5a5 +#define RSTMGR_WR_PASSWORD_SHIFT 8 +#define RSTMGR_WR_ACCESS_ENABLE 1 + +static void __iomem *kona_reset_base; + +static int kona_reset_handler(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* + * A soft reset is triggered by writing a 0 to bit 0 of the soft reset + * register. To write to that register we must first write the password + * and the enable bit in the write access enable register. + */ + writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) | + RSTMGR_WR_ACCESS_ENABLE, + kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET); + writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET); + + return NOTIFY_DONE; +} + +static struct notifier_block kona_reset_nb = { + .notifier_call = kona_reset_handler, + .priority = 128, +}; + +static int kona_reset_probe(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + kona_reset_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kona_reset_base)) + return PTR_ERR(kona_reset_base); + + return register_restart_handler(&kona_reset_nb); +} + +static const struct of_device_id of_match[] = { + { .compatible = "brcm,bcm21664-resetmgr" }, + {}, +}; + +static struct platform_driver bcm_kona_reset_driver = { + .probe = kona_reset_probe, + .driver = { + .name = "brcm-kona-reset", + .of_match_table = of_match, + }, +}; + +builtin_platform_driver(bcm_kona_reset_driver); diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 0b2733db0e9e..ab37f4db9642 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -12,8 +12,12 @@ menuconfig RESET_CONTROLLER If unsure, say no. +if RESET_CONTROLLER + config RESET_OXNAS bool source "drivers/reset/sti/Kconfig" source "drivers/reset/hisilicon/Kconfig" + +endif diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index f173fc3847b4..03dc1bb7649e 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o obj-$(CONFIG_MACH_PISTACHIO) += reset-pistachio.o +obj-$(CONFIG_ARCH_MESON) += reset-meson.o obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o obj-$(CONFIG_ARCH_STI) += sti/ obj-$(CONFIG_ARCH_HISI) += hisilicon/ diff --git a/drivers/reset/core.c b/drivers/reset/core.c index 72b32bd15549..395dc9ce492e 100644 --- a/drivers/reset/core.c +++ b/drivers/reset/core.c @@ -93,6 +93,43 @@ void reset_controller_unregister(struct reset_controller_dev *rcdev) } EXPORT_SYMBOL_GPL(reset_controller_unregister); +static void devm_reset_controller_release(struct device *dev, void *res) +{ + reset_controller_unregister(*(struct reset_controller_dev **)res); +} + +/** + * devm_reset_controller_register - resource managed reset_controller_register() + * @dev: device that is registering this reset controller + * @rcdev: a pointer to the initialized reset controller device + * + * Managed reset_controller_register(). For reset controllers registered by + * this function, reset_controller_unregister() is automatically called on + * driver detach. See reset_controller_register() for more information. + */ +int devm_reset_controller_register(struct device *dev, + struct reset_controller_dev *rcdev) +{ + struct reset_controller_dev **rcdevp; + int ret; + + rcdevp = devres_alloc(devm_reset_controller_release, sizeof(*rcdevp), + GFP_KERNEL); + if (!rcdevp) + return -ENOMEM; + + ret = reset_controller_register(rcdev); + if (!ret) { + *rcdevp = rcdev; + devres_add(dev, rcdevp); + } else { + devres_free(rcdevp); + } + + return ret; +} +EXPORT_SYMBOL_GPL(devm_reset_controller_register); + /** * reset_control_reset - reset the controlled device * @rstc: reset controller diff --git a/drivers/reset/reset-ath79.c b/drivers/reset/reset-ath79.c index ccb940a8d9fb..16d410cd6146 100644 --- a/drivers/reset/reset-ath79.c +++ b/drivers/reset/reset-ath79.c @@ -112,7 +112,7 @@ static int ath79_reset_probe(struct platform_device *pdev) ath79_reset->rcdev.of_reset_n_cells = 1; ath79_reset->rcdev.nr_resets = 32; - err = reset_controller_register(&ath79_reset->rcdev); + err = devm_reset_controller_register(&pdev->dev, &ath79_reset->rcdev); if (err) return err; @@ -131,7 +131,6 @@ static int ath79_reset_remove(struct platform_device *pdev) struct ath79_reset *ath79_reset = platform_get_drvdata(pdev); unregister_restart_handler(&ath79_reset->restart_nb); - reset_controller_unregister(&ath79_reset->rcdev); return 0; } diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c new file mode 100644 index 000000000000..c32f11a30c5f --- /dev/null +++ b/drivers/reset/reset-meson.c @@ -0,0 +1,136 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include <linux/err.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include <linux/types.h> + +#define REG_COUNT 8 +#define BITS_PER_REG 32 + +struct meson_reset { + void __iomem *reg_base; + struct reset_controller_dev rcdev; +}; + +static int meson_reset_reset(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct meson_reset *data = + container_of(rcdev, struct meson_reset, rcdev); + unsigned int bank = id / BITS_PER_REG; + unsigned int offset = id % BITS_PER_REG; + void __iomem *reg_addr = data->reg_base + (bank << 2); + + if (bank >= REG_COUNT) + return -EINVAL; + + writel(BIT(offset), reg_addr); + + return 0; +} + +static const struct reset_control_ops meson_reset_ops = { + .reset = meson_reset_reset, +}; + +static const struct of_device_id meson_reset_dt_ids[] = { + { .compatible = "amlogic,meson8b-reset", }, + { .compatible = "amlogic,meson-gxbb-reset", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_reset_dt_ids); + +static int meson_reset_probe(struct platform_device *pdev) +{ + struct meson_reset *data; + struct resource *res; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + data->reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(data->reg_base)) + return PTR_ERR(data->reg_base); + + platform_set_drvdata(pdev, data); + + data->rcdev.owner = THIS_MODULE; + data->rcdev.nr_resets = REG_COUNT * BITS_PER_REG; + data->rcdev.ops = &meson_reset_ops; + data->rcdev.of_node = pdev->dev.of_node; + + return devm_reset_controller_register(&pdev->dev, &data->rcdev); +} + +static struct platform_driver meson_reset_driver = { + .probe = meson_reset_probe, + .driver = { + .name = "meson_reset", + .of_match_table = meson_reset_dt_ids, + }, +}; + +module_platform_driver(meson_reset_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver"); +MODULE_LICENSE("Dual BSD/GPL"); diff --git a/drivers/reset/reset-oxnas.c b/drivers/reset/reset-oxnas.c index c60fb2dace3e..944980572f79 100644 --- a/drivers/reset/reset-oxnas.c +++ b/drivers/reset/reset-oxnas.c @@ -112,21 +112,11 @@ static int oxnas_reset_probe(struct platform_device *pdev) data->rcdev.ops = &oxnas_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int oxnas_reset_remove(struct platform_device *pdev) -{ - struct oxnas_reset *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &data->rcdev); } static struct platform_driver oxnas_reset_driver = { .probe = oxnas_reset_probe, - .remove = oxnas_reset_remove, .driver = { .name = "oxnas-reset", .of_match_table = oxnas_reset_dt_ids, diff --git a/drivers/reset/reset-pistachio.c b/drivers/reset/reset-pistachio.c index 72a97a15a4c8..bbc4c06dd33b 100644 --- a/drivers/reset/reset-pistachio.c +++ b/drivers/reset/reset-pistachio.c @@ -121,16 +121,7 @@ static int pistachio_reset_probe(struct platform_device *pdev) rd->rcdev.ops = &pistachio_reset_ops; rd->rcdev.of_node = np; - return reset_controller_register(&rd->rcdev); -} - -static int pistachio_reset_remove(struct platform_device *pdev) -{ - struct pistachio_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(dev, &rd->rcdev); } static const struct of_device_id pistachio_reset_dt_ids[] = { @@ -141,7 +132,6 @@ MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids); static struct platform_driver pistachio_reset_driver = { .probe = pistachio_reset_probe, - .remove = pistachio_reset_remove, .driver = { .name = "pistachio-reset", .of_match_table = pistachio_reset_dt_ids, diff --git a/drivers/reset/reset-socfpga.c b/drivers/reset/reset-socfpga.c index cd05a7032b17..12add9b0fa49 100644 --- a/drivers/reset/reset-socfpga.c +++ b/drivers/reset/reset-socfpga.c @@ -134,16 +134,7 @@ static int socfpga_reset_probe(struct platform_device *pdev) data->rcdev.ops = &socfpga_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int socfpga_reset_remove(struct platform_device *pdev) -{ - struct socfpga_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(dev, &data->rcdev); } static const struct of_device_id socfpga_reset_dt_ids[] = { @@ -153,7 +144,6 @@ static const struct of_device_id socfpga_reset_dt_ids[] = { static struct platform_driver socfpga_reset_driver = { .probe = socfpga_reset_probe, - .remove = socfpga_reset_remove, .driver = { .name = "socfpga-reset", .of_match_table = socfpga_reset_dt_ids, diff --git a/drivers/reset/reset-sunxi.c b/drivers/reset/reset-sunxi.c index 677f86555212..3080190b3f90 100644 --- a/drivers/reset/reset-sunxi.c +++ b/drivers/reset/reset-sunxi.c @@ -165,21 +165,11 @@ static int sunxi_reset_probe(struct platform_device *pdev) data->rcdev.ops = &sunxi_reset_ops; data->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&data->rcdev); -} - -static int sunxi_reset_remove(struct platform_device *pdev) -{ - struct sunxi_reset_data *data = platform_get_drvdata(pdev); - - reset_controller_unregister(&data->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &data->rcdev); } static struct platform_driver sunxi_reset_driver = { .probe = sunxi_reset_probe, - .remove = sunxi_reset_remove, .driver = { .name = "sunxi-reset", .of_match_table = sunxi_reset_dt_ids, diff --git a/drivers/reset/reset-zynq.c b/drivers/reset/reset-zynq.c index a7e87bc45885..138f2f205662 100644 --- a/drivers/reset/reset-zynq.c +++ b/drivers/reset/reset-zynq.c @@ -122,16 +122,7 @@ static int zynq_reset_probe(struct platform_device *pdev) priv->rcdev.ops = &zynq_reset_ops; priv->rcdev.of_node = pdev->dev.of_node; - return reset_controller_register(&priv->rcdev); -} - -static int zynq_reset_remove(struct platform_device *pdev) -{ - struct zynq_reset_data *priv = platform_get_drvdata(pdev); - - reset_controller_unregister(&priv->rcdev); - - return 0; + return devm_reset_controller_register(&pdev->dev, &priv->rcdev); } static const struct of_device_id zynq_reset_dt_ids[] = { @@ -141,7 +132,6 @@ static const struct of_device_id zynq_reset_dt_ids[] = { static struct platform_driver zynq_reset_driver = { .probe = zynq_reset_probe, - .remove = zynq_reset_remove, .driver = { .name = KBUILD_MODNAME, .of_match_table = zynq_reset_dt_ids, diff --git a/drivers/reset/sti/Kconfig b/drivers/reset/sti/Kconfig index f8c15a37fb35..613178553612 100644 --- a/drivers/reset/sti/Kconfig +++ b/drivers/reset/sti/Kconfig @@ -2,7 +2,6 @@ if ARCH_STI config STI_RESET_SYSCFG bool - select RESET_CONTROLLER config STIH415_RESET bool diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig index cb58ef0d9b2c..91d5c05d395f 100644 --- a/drivers/soc/Kconfig +++ b/drivers/soc/Kconfig @@ -1,7 +1,6 @@ menu "SOC (System On Chip) specific Drivers" source "drivers/soc/bcm/Kconfig" -source "drivers/soc/brcmstb/Kconfig" source "drivers/soc/fsl/qe/Kconfig" source "drivers/soc/mediatek/Kconfig" source "drivers/soc/qcom/Kconfig" diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile index 380230f03874..b75e3bd0a01e 100644 --- a/drivers/soc/Makefile +++ b/drivers/soc/Makefile @@ -3,7 +3,6 @@ # obj-y += bcm/ -obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ obj-$(CONFIG_ARCH_DOVE) += dove/ obj-$(CONFIG_MACH_DOVE) += dove/ obj-y += fsl/ diff --git a/drivers/soc/bcm/Kconfig b/drivers/soc/bcm/Kconfig index 3066edea184d..97156aeed286 100644 --- a/drivers/soc/bcm/Kconfig +++ b/drivers/soc/bcm/Kconfig @@ -1,3 +1,5 @@ +menu "Broadcom SoC drivers" + config RASPBERRYPI_POWER bool "Raspberry Pi power domain driver" depends on ARCH_BCM2835 || COMPILE_TEST @@ -7,3 +9,16 @@ config RASPBERRYPI_POWER help This enables support for the RPi power domains which can be enabled or disabled via the RPi firmware. + +config SOC_BRCMSTB + bool "Broadcom STB SoC drivers" + depends on ARM + select SOC_BUS + help + Enables drivers for the Broadcom Set-Top Box (STB) series of chips. + This option alone enables only some support code, while the drivers + can be enabled individually within this menu. + + If unsure, say N. + +endmenu diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile index 63aa3eb23087..dc4fced72d21 100644 --- a/drivers/soc/bcm/Makefile +++ b/drivers/soc/bcm/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o +obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/ diff --git a/drivers/soc/brcmstb/Makefile b/drivers/soc/bcm/brcmstb/Makefile index 9120b2715d3e..9120b2715d3e 100644 --- a/drivers/soc/brcmstb/Makefile +++ b/drivers/soc/bcm/brcmstb/Makefile diff --git a/drivers/soc/brcmstb/biuctrl.c b/drivers/soc/bcm/brcmstb/biuctrl.c index 9049c076f9a1..3c39415d484f 100644 --- a/drivers/soc/brcmstb/biuctrl.c +++ b/drivers/soc/bcm/brcmstb/biuctrl.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/soc/brcmstb/brcmstb.h> #define CPU_CREDIT_REG_OFFSET 0x184 #define CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK 0x70000000 diff --git a/drivers/soc/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c index 94e7335553f4..94e7335553f4 100644 --- a/drivers/soc/brcmstb/common.c +++ b/drivers/soc/bcm/brcmstb/common.c diff --git a/drivers/soc/brcmstb/Kconfig b/drivers/soc/brcmstb/Kconfig deleted file mode 100644 index 7fec3b4c80a1..000000000000 --- a/drivers/soc/brcmstb/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -menuconfig SOC_BRCMSTB - bool "Broadcom STB SoC drivers" - depends on ARM - select SOC_BUS - help - Enables drivers for the Broadcom Set-Top Box (STB) series of chips. - This option alone enables only some support code, while the drivers - can be enabled individually within this menu. - - If unsure, say N. diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile index 151fcd3f025b..cd85cd5e6a01 100644 --- a/drivers/soc/renesas/Makefile +++ b/drivers/soc/renesas/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_ARCH_R8A7791) += rcar-sysc.o r8a7791-sysc.o obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o +obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c new file mode 100644 index 000000000000..f700c842b9e1 --- /dev/null +++ b/drivers/soc/renesas/r8a7796-sysc.c @@ -0,0 +1,48 @@ +/* + * Renesas R-Car M3-W System Controller + * + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/bug.h> +#include <linux/kernel.h> + +#include <dt-bindings/power/r8a7796-sysc.h> + +#include "rcar-sysc.h" + +static const struct rcar_sysc_area r8a7796_areas[] __initconst = { + { "always-on", 0, 0, R8A7796_PD_ALWAYS_ON, -1, PD_ALWAYS_ON }, + { "ca57-scu", 0x1c0, 0, R8A7796_PD_CA57_SCU, R8A7796_PD_ALWAYS_ON, + PD_SCU }, + { "ca57-cpu0", 0x80, 0, R8A7796_PD_CA57_CPU0, R8A7796_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca57-cpu1", 0x80, 1, R8A7796_PD_CA57_CPU1, R8A7796_PD_CA57_SCU, + PD_CPU_NOCR }, + { "ca53-scu", 0x140, 0, R8A7796_PD_CA53_SCU, R8A7796_PD_ALWAYS_ON, + PD_SCU }, + { "ca53-cpu0", 0x200, 0, R8A7796_PD_CA53_CPU0, R8A7796_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu1", 0x200, 1, R8A7796_PD_CA53_CPU1, R8A7796_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu2", 0x200, 2, R8A7796_PD_CA53_CPU2, R8A7796_PD_CA53_SCU, + PD_CPU_NOCR }, + { "ca53-cpu3", 0x200, 3, R8A7796_PD_CA53_CPU3, R8A7796_PD_CA53_SCU, + PD_CPU_NOCR }, + { "cr7", 0x240, 0, R8A7796_PD_CR7, R8A7796_PD_ALWAYS_ON }, + { "a3vc", 0x380, 0, R8A7796_PD_A3VC, R8A7796_PD_ALWAYS_ON }, + { "a2vc0", 0x3c0, 0, R8A7796_PD_A2VC0, R8A7796_PD_A3VC }, + { "a2vc1", 0x3c0, 1, R8A7796_PD_A2VC1, R8A7796_PD_A3VC }, + { "3dg-a", 0x100, 0, R8A7796_PD_3DG_A, R8A7796_PD_ALWAYS_ON }, + { "3dg-b", 0x100, 1, R8A7796_PD_3DG_B, R8A7796_PD_3DG_A }, + { "a3ir", 0x180, 0, R8A7796_PD_A3IR, R8A7796_PD_ALWAYS_ON }, +}; + +const struct rcar_sysc_info r8a7796_sysc_info __initconst = { + .areas = r8a7796_areas, + .num_areas = ARRAY_SIZE(r8a7796_areas), +}; diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c index 79dbc770895f..fc997d4d2a4a 100644 --- a/drivers/soc/renesas/rcar-sysc.c +++ b/drivers/soc/renesas/rcar-sysc.c @@ -303,6 +303,9 @@ static const struct of_device_id rcar_sysc_matches[] = { #ifdef CONFIG_ARCH_R8A7795 { .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info }, #endif +#ifdef CONFIG_ARCH_R8A7796 + { .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info }, +#endif { /* sentinel */ } }; diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h index 5e766174c2f4..4ac3d7bf7f38 100644 --- a/drivers/soc/renesas/rcar-sysc.h +++ b/drivers/soc/renesas/rcar-sysc.h @@ -55,4 +55,5 @@ extern const struct rcar_sysc_info r8a7790_sysc_info; extern const struct rcar_sysc_info r8a7791_sysc_info; extern const struct rcar_sysc_info r8a7794_sysc_info; extern const struct rcar_sysc_info r8a7795_sysc_info; +extern const struct rcar_sysc_info r8a7796_sysc_info; #endif /* __SOC_RENESAS_RCAR_SYSC_H__ */ diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig index d7fc123006a3..245533907d1b 100644 --- a/drivers/soc/samsung/Kconfig +++ b/drivers/soc/samsung/Kconfig @@ -10,4 +10,8 @@ config EXYNOS_PMU bool "Exynos PMU controller driver" if COMPILE_TEST depends on (ARM && ARCH_EXYNOS) || ((ARM || ARM64) && COMPILE_TEST) +config EXYNOS_PM_DOMAINS + bool "Exynos PM domains" if COMPILE_TEST + depends on PM_GENERIC_DOMAINS || COMPILE_TEST + endif diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile index f64ac4d80564..3619f2ecddaa 100644 --- a/drivers/soc/samsung/Makefile +++ b/drivers/soc/samsung/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_EXYNOS_PMU) += exynos-pmu.o exynos3250-pmu.o exynos4-pmu.o \ exynos5250-pmu.o exynos5420-pmu.o +obj-$(CONFIG_EXYNOS_PM_DOMAINS) += pm_domains.o diff --git a/arch/arm/mach-exynos/pm_domains.c b/drivers/soc/samsung/pm_domains.c index 875a2bab64f6..f60515eefb66 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/drivers/soc/samsung/pm_domains.c @@ -23,9 +23,13 @@ #include <linux/of_platform.h> #include <linux/sched.h> -#define INT_LOCAL_PWR_EN 0x7 #define MAX_CLK_PER_DOMAIN 4 +struct exynos_pm_domain_config { + /* Value for LOCAL_PWR_CFG and STATUS fields for each domain */ + u32 local_pwr_cfg; +}; + /* * Exynos specific wrapper around the generic power domain */ @@ -38,6 +42,7 @@ struct exynos_pm_domain { struct clk *clk[MAX_CLK_PER_DOMAIN]; struct clk *pclk[MAX_CLK_PER_DOMAIN]; struct clk *asb_clk[MAX_CLK_PER_DOMAIN]; + u32 local_pwr_cfg; }; static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) @@ -69,13 +74,13 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) } } - pwr = power_on ? INT_LOCAL_PWR_EN : 0; + pwr = power_on ? pd->local_pwr_cfg : 0; __raw_writel(pwr, base); /* Wait max 1ms */ timeout = 10; - while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) { + while ((__raw_readl(base + 0x4) & pd->local_pwr_cfg) != pwr) { if (!timeout) { op = (power_on) ? "enable" : "disable"; pr_err("Power domain %s %s failed\n", domain->name, op); @@ -119,14 +124,30 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain) return exynos_pd_power(domain, false); } +static const struct exynos_pm_domain_config exynos4210_cfg __initconst = { + .local_pwr_cfg = 0x7, +}; + +static const struct of_device_id exynos_pm_domain_of_match[] __initconst = { + { + .compatible = "samsung,exynos4210-pd", + .data = &exynos4210_cfg, + }, + { }, +}; + static __init int exynos4_pm_init_power_domain(void) { struct device_node *np; + const struct of_device_id *match; - for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + for_each_matching_node_and_match(np, exynos_pm_domain_of_match, &match) { + const struct exynos_pm_domain_config *pm_domain_cfg; struct exynos_pm_domain *pd; int on, i; + pm_domain_cfg = match->data; + pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { pr_err("%s: failed to allocate memory for domain\n", @@ -153,6 +174,7 @@ static __init int exynos4_pm_init_power_domain(void) pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; + pd->local_pwr_cfg = pm_domain_cfg->local_pwr_cfg; for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { char clk_name[8]; @@ -185,14 +207,14 @@ static __init int exynos4_pm_init_power_domain(void) clk_put(pd->oscclk); no_clk: - on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN; + on = __raw_readl(pd->base + 0x4) & pd->local_pwr_cfg; pm_genpd_init(&pd->pd, NULL, !on); of_genpd_add_provider_simple(np, &pd->pd); } /* Assign the child power domains to their parents */ - for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { + for_each_matching_node(np, exynos_pm_domain_of_match) { struct generic_pm_domain *child_domain, *parent_domain; struct of_phandle_args args; diff --git a/include/dt-bindings/power/r8a7796-sysc.h b/include/dt-bindings/power/r8a7796-sysc.h new file mode 100644 index 000000000000..5b4daab44daa --- /dev/null +++ b/include/dt-bindings/power/r8a7796-sysc.h @@ -0,0 +1,36 @@ +/* + * Copyright (C) 2016 Glider bvba + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ +#ifndef __DT_BINDINGS_POWER_R8A7796_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7796_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7796_PD_CA57_CPU0 0 +#define R8A7796_PD_CA57_CPU1 1 +#define R8A7796_PD_CA53_CPU0 5 +#define R8A7796_PD_CA53_CPU1 6 +#define R8A7796_PD_CA53_CPU2 7 +#define R8A7796_PD_CA53_CPU3 8 +#define R8A7796_PD_CA57_SCU 12 +#define R8A7796_PD_CR7 13 +#define R8A7796_PD_A3VC 14 +#define R8A7796_PD_3DG_A 17 +#define R8A7796_PD_3DG_B 18 +#define R8A7796_PD_CA53_SCU 21 +#define R8A7796_PD_A3IR 24 +#define R8A7796_PD_A2VC0 25 +#define R8A7796_PD_A2VC1 26 + +/* Always-on power area */ +#define R8A7796_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7796_SYSC_H__ */ diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h new file mode 100644 index 000000000000..524d6077ac1b --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h @@ -0,0 +1,210 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +/* 1 */ +#define RESET_DOS_RESET 2 +#define RESET_DDR_TOP 3 +#define RESET_DCU_RESET 4 +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_VID_PLL_DIV 7 +/* 8 */ +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_VCBUS 13 +/* 14 */ +/* 15 */ +#define RESET_GIC 16 +#define RESET_CAPB3_DECODE 17 +#define RESET_NAND_CAPB3 18 +#define RESET_HDMITX_CAPB3 19 +#define RESET_MALI_CAPB3 20 +#define RESET_DOS_CAPB3 21 +#define RESET_SYS_CPU_CAPB3 22 +#define RESET_CBUS_CAPB3 23 +#define RESET_AHB_CNTL 24 +#define RESET_AHB_DATA 25 +#define RESET_VCBUS_CLK81 26 +#define RESET_MMC 27 +#define RESET_MIPI_0 28 +#define RESET_MIPI_1 29 +#define RESET_MIPI_2 30 +#define RESET_MIPI_3 31 +/* RESET1 */ +#define RESET_CPPM 32 +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_AO_RESET 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +/* 39 */ +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_SD_EMMC_A 44 +#define RESET_SD_EMMC_B 45 +#define RESET_SD_EMMC_C 46 +#define RESET_ROM_BOOT 47 +#define RESET_SYS_CPU_0 48 +#define RESET_SYS_CPU_1 49 +#define RESET_SYS_CPU_2 50 +#define RESET_SYS_CPU_3 51 +#define RESET_SYS_CPU_CORE_0 52 +#define RESET_SYS_CPU_CORE_1 53 +#define RESET_SYS_CPU_CORE_2 54 +#define RESET_SYS_CPU_CORE_3 55 +#define RESET_SYS_PLL_DIV 56 +#define RESET_SYS_CPU_AXI 57 +#define RESET_SYS_CPU_L2 58 +#define RESET_SYS_CPU_P 59 +#define RESET_SYS_CPU_MBIST 60 +/* 61 */ +/* 62 */ +/* 63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_HDMI_TX 66 +/* 67 */ +/* 68 */ +/* 69 */ +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +/* 75 */ +/* 76 */ +#define RESET_AO_CPU_RESET 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_TVFE 101 +#define RESET_AHB_BRIDGE_CNTL 102 +/* 103 */ +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +/* 128 */ +/* 129 */ +/* 130 */ +/* 131 */ +#define RESET_DVIN_RESET 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +/* 136 */ +#define RESET_VDAC 137 +#define RESET_RTC 138 +/* 139 */ +#define RESET_VDI6 140 +#define RESET_VENCL 141 +#define RESET_I2C_MASTER_2 142 +#define RESET_I2C_MASTER_1 143 +/* 144-159 */ +/* RESET5 */ +/* 160-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_SPICC 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_SANA 197 +/* 198 */ +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1_2 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SDHC 206 +#define RESET_UART_SLIP 207 +/* 208-223 */ +/* RESET7 */ +#define RESET_USB_DDR_0 224 +#define RESET_USB_DDR_1 225 +#define RESET_USB_DDR_2 226 +#define RESET_USB_DDR_3 227 +/* 228 */ +#define RESET_DEVICE_MMC_ARB 229 +/* 230 */ +#define RESET_VID_LOCK 231 +#define RESET_A9_DMC_PIPEL 232 +/* 233-255 */ + +#endif diff --git a/include/dt-bindings/reset/amlogic,meson8b-reset.h b/include/dt-bindings/reset/amlogic,meson8b-reset.h new file mode 100644 index 000000000000..614aff2c7aff --- /dev/null +++ b/include/dt-bindings/reset/amlogic,meson8b-reset.h @@ -0,0 +1,175 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * BSD LICENSE + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H +#define _DT_BINDINGS_AMLOGIC_MESON8B_RESET_H + +/* RESET0 */ +#define RESET_HIU 0 +#define RESET_VLD 1 +#define RESET_IQIDCT 2 +#define RESET_MC 3 +/* 8 */ +#define RESET_VIU 5 +#define RESET_AIU 6 +#define RESET_MCPU 7 +#define RESET_CCPU 8 +#define RESET_PMUX 9 +#define RESET_VENC 10 +#define RESET_ASSIST 11 +#define RESET_AFIFO2 12 +#define RESET_MDEC 13 +#define RESET_VLD_PART 14 +#define RESET_VIFIFO 15 +/* 16-31 */ +/* RESET1 */ +/* 32 */ +#define RESET_DEMUX 33 +#define RESET_USB_OTG 34 +#define RESET_DDR 35 +#define RESET_VDAC_1 36 +#define RESET_BT656 37 +#define RESET_AHB_SRAM 38 +#define RESET_AHB_BRIDGE 39 +#define RESET_PARSER 40 +#define RESET_BLKMV 41 +#define RESET_ISA 42 +#define RESET_ETHERNET 43 +#define RESET_ABUF 44 +#define RESET_AHB_DATA 45 +#define RESET_AHB_CNTL 46 +#define RESET_ROM_BOOT 47 +/* 48-63 */ +/* RESET2 */ +#define RESET_VD_RMEM 64 +#define RESET_AUDIN 65 +#define RESET_DBLK 66 +#define RESET_PIC_DC 66 +#define RESET_PSC 66 +#define RESET_NAND 66 +#define RESET_GE2D 70 +#define RESET_PARSER_REG 71 +#define RESET_PARSER_FETCH 72 +#define RESET_PARSER_CTL 73 +#define RESET_PARSER_TOP 74 +#define RESET_HDMI_APB 75 +#define RESET_AUDIO_APB 76 +#define RESET_MEDIA_CPU 77 +#define RESET_MALI 78 +#define RESET_HDMI_SYSTEM_RESET 79 +/* 80-95 */ +/* RESET3 */ +#define RESET_RING_OSCILLATOR 96 +#define RESET_SYS_CPU_0 97 +#define RESET_EFUSE 98 +#define RESET_SYS_CPU_BVCI 99 +#define RESET_AIFIFO 100 +#define RESET_AUDIO_PLL_MODULATOR 101 +#define RESET_AHB_BRIDGE_CNTL 102 +#define RESET_SYS_CPU_1 103 +#define RESET_AUDIO_DAC 104 +#define RESET_DEMUX_TOP 105 +#define RESET_DEMUX_DES 106 +#define RESET_DEMUX_S2P_0 107 +#define RESET_DEMUX_S2P_1 108 +#define RESET_DEMUX_RESET_0 109 +#define RESET_DEMUX_RESET_1 110 +#define RESET_DEMUX_RESET_2 111 +/* 112-127 */ +/* RESET4 */ +#define RESET_PL310 128 +#define RESET_A5_APB 129 +#define RESET_A5_AXI 130 +#define RESET_A5 131 +#define RESET_DVIN 132 +#define RESET_RDMA 133 +#define RESET_VENCI 134 +#define RESET_VENCP 135 +#define RESET_VENCT 136 +#define RESET_VDAC_4 137 +#define RESET_RTC 138 +#define RESET_A5_DEBUG 139 +#define RESET_VDI6 140 +#define RESET_VENCL 141 +/* 142-159 */ +/* RESET5 */ +#define RESET_DDR_PLL 160 +#define RESET_MISC_PLL 161 +#define RESET_SYS_PLL 162 +#define RESET_HPLL_PLL 163 +#define RESET_AUDIO_PLL 164 +#define RESET_VID2_PLL 165 +/* 166-191 */ +/* RESET6 */ +#define RESET_PERIPHS_GENERAL 192 +#define RESET_PERIPHS_IR_REMOTE 193 +#define RESET_PERIPHS_SMART_CARD 194 +#define RESET_PERIPHS_SAR_ADC 195 +#define RESET_PERIPHS_I2C_MASTER_0 196 +#define RESET_PERIPHS_I2C_MASTER_1 197 +#define RESET_PERIPHS_I2C_SLAVE 198 +#define RESET_PERIPHS_STREAM_INTERFACE 199 +#define RESET_PERIPHS_SDIO 200 +#define RESET_PERIPHS_UART_0 201 +#define RESET_PERIPHS_UART_1 202 +#define RESET_PERIPHS_ASYNC_0 203 +#define RESET_PERIPHS_ASYNC_1 204 +#define RESET_PERIPHS_SPI_0 205 +#define RESET_PERIPHS_SPI_1 206 +#define RESET_PERIPHS_LED_PWM 207 +/* 208-223 */ +/* RESET7 */ +/* 224-255 */ + +#endif diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h index ad2f67054372..1779cda99ef7 100644 --- a/include/linux/of_reserved_mem.h +++ b/include/linux/of_reserved_mem.h @@ -1,7 +1,8 @@ #ifndef __OF_RESERVED_MEM_H #define __OF_RESERVED_MEM_H -struct device; +#include <linux/device.h> + struct of_phandle_args; struct reserved_mem_ops; @@ -28,14 +29,17 @@ typedef int (*reservedmem_of_init_fn)(struct reserved_mem *rmem); _OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn) #ifdef CONFIG_OF_RESERVED_MEM -int of_reserved_mem_device_init(struct device *dev); + +int of_reserved_mem_device_init_by_idx(struct device *dev, + struct device_node *np, int idx); void of_reserved_mem_device_release(struct device *dev); void fdt_init_reserved_mem(void); void fdt_reserved_mem_save_node(unsigned long node, const char *uname, phys_addr_t base, phys_addr_t size); #else -static inline int of_reserved_mem_device_init(struct device *dev) +static inline int of_reserved_mem_device_init_by_idx(struct device *dev, + struct device_node *np, int idx) { return -ENOSYS; } @@ -46,4 +50,19 @@ static inline void fdt_reserved_mem_save_node(unsigned long node, const char *uname, phys_addr_t base, phys_addr_t size) { } #endif +/** + * of_reserved_mem_device_init() - assign reserved memory region to given device + * @dev: Pointer to the device to configure + * + * This function assigns respective DMA-mapping operations based on the first + * reserved memory region specified by 'memory-region' property in device tree + * node of the given device. + * + * Returns error code or zero on success. + */ +static inline int of_reserved_mem_device_init(struct device *dev) +{ + return of_reserved_mem_device_init_by_idx(dev, dev->of_node, 0); +} + #endif /* __OF_RESERVED_MEM_H */ diff --git a/include/linux/reset-controller.h b/include/linux/reset-controller.h index b91ba932bbd4..db1fe6772ad5 100644 --- a/include/linux/reset-controller.h +++ b/include/linux/reset-controller.h @@ -53,4 +53,8 @@ struct reset_controller_dev { int reset_controller_register(struct reset_controller_dev *rcdev); void reset_controller_unregister(struct reset_controller_dev *rcdev); +struct device; +int devm_reset_controller_register(struct device *dev, + struct reset_controller_dev *rcdev); + #endif diff --git a/include/linux/reset.h b/include/linux/reset.h index ec0306ce7b92..067db57c81dc 100644 --- a/include/linux/reset.h +++ b/include/linux/reset.h @@ -71,14 +71,14 @@ static inline struct reset_control *__of_reset_control_get( struct device_node *node, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } static inline struct reset_control *__devm_reset_control_get( struct device *dev, const char *id, int index, int shared) { - return ERR_PTR(-EINVAL); + return ERR_PTR(-ENOTSUPP); } #endif /* CONFIG_RESET_CONTROLLER */ diff --git a/include/linux/scpi_protocol.h b/include/linux/scpi_protocol.h index 35de50a65665..dc5f989be226 100644 --- a/include/linux/scpi_protocol.h +++ b/include/linux/scpi_protocol.h @@ -70,6 +70,8 @@ struct scpi_ops { int (*sensor_get_capability)(u16 *sensors); int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *); int (*sensor_get_value)(u16, u64 *); + int (*device_get_power_state)(u16); + int (*device_set_power_state)(u16, u8); }; #if IS_REACHABLE(CONFIG_ARM_SCPI_PROTOCOL) diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h index 2087c9a68be3..f7dc8401817e 100644 --- a/include/media/videobuf2-dma-contig.h +++ b/include/media/videobuf2-dma-contig.h @@ -35,6 +35,8 @@ static inline void *vb2_dma_contig_init_ctx(struct device *dev) } void vb2_dma_contig_cleanup_ctx(void *alloc_ctx); +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size); +void vb2_dma_contig_clear_max_seg_size(struct device *dev); extern const struct vb2_mem_ops vb2_dma_contig_memops; |