diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ufs/ufs-qcom.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ufs/ufs-qcom.txt | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufs-qcom.txt b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt new file mode 100644 index 000000000000..070baf4d7d97 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-qcom.txt @@ -0,0 +1,58 @@ +* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY + +UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro. +Each UFS PHY node should have its own node. + +To bind UFS PHY with UFS host controller, the controller node should +contain a phandle reference to UFS PHY node. + +Required properties: +- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm" + or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use. +- reg : should contain PHY register address space (mandatory), +- reg-names : indicates various resources passed to driver (via reg proptery) by name. + Required "reg-names" is "phy_mem". +- #phy-cells : This property shall be set to 0 +- vdda-phy-supply : phandle to main PHY supply for analog domain +- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply +- clocks : List of phandle and clock specifier pairs +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "ref_clk_src", "ref_clk", + "tx_iface_clk" & "rx_iface_clk" are mandatory but + "ref_clk_parent" is optional + +Optional properties: +- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply +- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply +- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply +- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply +- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on + +Example: + + ufsphy1: ufsphy@0xfc597000 { + compatible = "qcom,ufs-phy-qmp-20nm"; + reg = <0xfc597000 0x800>; + reg-names = "phy_mem"; + #phy-cells = <0>; + vdda-phy-supply = <&pma8084_l4>; + vdda-pll-supply = <&pma8084_l12>; + vdda-phy-max-microamp = <50000>; + vdda-pll-max-microamp = <1000>; + clock-names = "ref_clk_src", + "ref_clk_parent", + "ref_clk", + "tx_iface_clk", + "rx_iface_clk"; + clocks = <&clock_rpm clk_ln_bb_clk>, + <&clock_gcc clk_pcie_1_phy_ldo >, + <&clock_gcc clk_ufs_phy_ldo>, + <&clock_gcc clk_gcc_ufs_tx_cfg_clk>, + <&clock_gcc clk_gcc_ufs_rx_cfg_clk>; + }; + + ufshc@0xfc598000 { + ... + phys = <&ufsphy1>; + phy-names = "ufsphy"; + }; |