diff options
Diffstat (limited to 'arch/arm/mach-s3c24xx/pm.c')
| -rw-r--r-- | arch/arm/mach-s3c24xx/pm.c | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c new file mode 100644 index 000000000000..60627e63a254 --- /dev/null +++ b/arch/arm/mach-s3c24xx/pm.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004-2006 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Power Manager (Suspend-To-RAM) support + * + * See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Parts based on arch/arm/mach-pxa/pm.c + * + * Thanks to Dimitry Andric for debugging +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/serial_core.h> +#include <linux/io.h> + +#include <plat/regs-serial.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> +#include <mach/regs-mem.h> +#include <mach/regs-irq.h> + +#include <asm/mach/time.h> + +#include <plat/gpio-cfg.h> +#include <plat/pm.h> + +#define PFX "s3c24xx-pm: " + +static struct sleep_save core_save[] = { + SAVE_ITEM(S3C2410_LOCKTIME), + SAVE_ITEM(S3C2410_CLKCON), + + /* we restore the timings here, with the proviso that the board + * brings the system up in an slower, or equal frequency setting + * to the original system. + * + * if we cannot guarantee this, then things are going to go very + * wrong here, as we modify the refresh and both pll settings. + */ + + SAVE_ITEM(S3C2410_BWSCON), + SAVE_ITEM(S3C2410_BANKCON0), + SAVE_ITEM(S3C2410_BANKCON1), + SAVE_ITEM(S3C2410_BANKCON2), + SAVE_ITEM(S3C2410_BANKCON3), + SAVE_ITEM(S3C2410_BANKCON4), + SAVE_ITEM(S3C2410_BANKCON5), + +#ifndef CONFIG_CPU_FREQ + SAVE_ITEM(S3C2410_CLKDIVN), + SAVE_ITEM(S3C2410_MPLLCON), + SAVE_ITEM(S3C2410_REFRESH), +#endif + SAVE_ITEM(S3C2410_UPLLCON), + SAVE_ITEM(S3C2410_CLKSLOW), +}; + +static struct sleep_save misc_save[] = { + SAVE_ITEM(S3C2410_DCLKCON), +}; + +/* s3c_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + unsigned long irqstate; + unsigned long pinstate; + int irq = gpio_to_irq(pin); + + if (irqoffs < 4) + irqstate = s3c_irqwake_intmask & (1L<<irqoffs); + else + irqstate = s3c_irqwake_eintmask & (1L<<irqoffs); + + pinstate = s3c_gpio_getcfg(pin); + + if (!irqstate) { + if (pinstate == S3C2410_GPIO_IRQ) + S3C_PMDBG("Leaving IRQ %d (pin %d) as is\n", irq, pin); + } else { + if (pinstate == S3C2410_GPIO_IRQ) { + S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin); + s3c_gpio_cfgpin(pin, S3C2410_GPIO_INPUT); + } + } +} + +/* s3c_pm_configure_extint + * + * configure all external interrupt pins +*/ + +void s3c_pm_configure_extint(void) +{ + int pin; + + /* for each of the external interrupts (EINT0..EINT15) we + * need to check wether it is an external interrupt source, + * and then configure it as an input if it is not + */ + + for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) { + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0)); + } + + for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) { + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8); + } +} + + +void s3c_pm_restore_core(void) +{ + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); +} + |