diff options
Diffstat (limited to 'arch/arm64')
177 files changed, 7239 insertions, 1939 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index bc3f00f586f1..30398dbc940a 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -4,18 +4,19 @@ config ARM64 select ACPI_GENERIC_GSI if ACPI select ACPI_REDUCED_HARDWARE_ONLY if ACPI select ACPI_MCFG if ACPI + select ACPI_SPCR_TABLE if ACPI + select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_DEVMEM_IS_ALLOWED select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI - select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_GIGANTIC_PAGE select ARCH_HAS_KCOV select ARCH_HAS_SG_CHAIN select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_USE_CMPXCHG_LOCKREF select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_SUPPORTS_NUMA_BALANCING - select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_COMPAT_IPC_PARSE_VERSION select ARCH_WANT_FRAME_POINTERS select ARCH_HAS_UBSAN_SANITIZE_ALL @@ -102,10 +103,8 @@ config ARM64 select NO_BOOTMEM select OF select OF_EARLY_FLATTREE - select OF_NUMA if NUMA && OF select OF_RESERVED_MEM select PCI_ECAM if ACPI - select PERF_USE_VMALLOC select POWER_RESET select POWER_SUPPLY select SPARSE_IRQ @@ -122,6 +121,9 @@ config ARCH_PHYS_ADDR_T_64BIT config MMU def_bool y +config DEBUG_RODATA + def_bool y + config ARM64_PAGE_SHIFT int default 16 if ARM64_64K_PAGES @@ -415,18 +417,13 @@ config ARM64_ERRATUM_845719 config ARM64_ERRATUM_843419 bool "Cortex-A53: 843419: A load or store might access an incorrect address" - depends on MODULES default y - select ARM64_MODULE_CMODEL_LARGE + select ARM64_MODULE_CMODEL_LARGE if MODULES help - This option builds kernel modules using the large memory model in - order to avoid the use of the ADRP instruction, which can cause - a subsequent memory access to use an incorrect address on Cortex-A53 - parts up to r0p4. - - Note that the kernel itself must be linked with a version of ld - which fixes potentially affected ADRP instructions through the - use of veneers. + This option links the kernel with '--fix-cortex-a53-843419' and + builds modules using the large memory model in order to avoid the use + of the ADRP instruction, which can cause a subsequent memory access + to use an incorrect address on Cortex-A53 parts up to r0p4. If unsure, say Y. @@ -582,7 +579,8 @@ config HOTPLUG_CPU # Common NUMA Features config NUMA bool "Numa Memory Allocation and Scheduler Support" - depends on SMP + select ACPI_NUMA if ACPI + select OF_NUMA help Enable NUMA (Non Uniform Memory Access) support. @@ -603,11 +601,18 @@ config USE_PERCPU_NUMA_NODE_ID def_bool y depends on NUMA +config HAVE_SETUP_PER_CPU_AREA + def_bool y + depends on NUMA + +config NEED_PER_CPU_EMBED_FIRST_CHUNK + def_bool y + depends on NUMA + source kernel/Kconfig.preempt source kernel/Kconfig.hz config ARCH_SUPPORTS_DEBUG_PAGEALLOC - depends on !HIBERNATION def_bool y config ARCH_HAS_HOLES_MEMORYMODEL diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index 0cc758cdd0dc..b661fe742615 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -49,16 +49,6 @@ config DEBUG_SET_MODULE_RONX If in doubt, say Y. -config DEBUG_RODATA - bool "Make kernel text and rodata read-only" - default y - help - If this is set, kernel text and rodata will be made read-only. This - is to help catch accidental or malicious attempts to change the - kernel's executable code. - - If in doubt, say Y. - config DEBUG_ALIGN_RODATA depends on DEBUG_RODATA bool "Align linker sections up to SECTION_SIZE" diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index be5d824ebdba..cfbdf02ef566 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -3,6 +3,8 @@ menu "Platform selection" config ARCH_SUNXI bool "Allwinner sunxi 64-bit SoC Family" select GENERIC_IRQ_CHIP + select PINCTRL + select PINCTRL_SUN50I_A64 help This enables support for Allwinner sunxi based SoCs like the A64. @@ -15,8 +17,8 @@ config ARCH_ALPINE config ARCH_BCM2835 bool "Broadcom BCM2835 family" - select ARCH_REQUIRE_GPIOLIB select CLKSRC_OF + select GPIOLIB select PINCTRL select PINCTRL_BCM2835 select ARM_AMBA @@ -29,19 +31,26 @@ config ARCH_BCM2835 config ARCH_BCM_IPROC bool "Broadcom iProc SoC Family" select COMMON_CLK_IPROC + select GPIOLIB select PINCTRL - select ARCH_REQUIRE_GPIOLIB help This enables support for Broadcom iProc based SoCs config ARCH_BERLIN bool "Marvell Berlin SoC Family" - select ARCH_REQUIRE_GPIOLIB select DW_APB_ICTL + select GPIOLIB select PINCTRL help This enables support for Marvell Berlin SoC Family +config ARCH_BRCMSTB + bool "Broadcom Set-Top-Box SoCs" + select BRCMSTB_L2_IRQ + select GENERIC_IRQ_CHIP + help + This enables support for Broadcom's ARMv8 Set Top Box SoCs + config ARCH_EXYNOS bool "ARMv8 based Samsung Exynos SoC family" select COMMON_CLK_SAMSUNG @@ -55,6 +64,7 @@ config ARCH_EXYNOS config ARCH_LAYERSCAPE bool "ARMv8 based Freescale Layerscape SoC family" + select EDAC_SUPPORT help This enables support for the Freescale Layerscape SoC family. @@ -67,6 +77,7 @@ config ARCH_HISI bool "Hisilicon SoC Family" select ARM_TIMER_SP804 select HISILICON_IRQ_MBIGEN if PCI + select PINCTRL help This enables support for Hisilicon ARMv8 SoC family @@ -93,6 +104,7 @@ config ARCH_MVEBU select ARMADA_CP110_SYSCON select ARMADA_37XX_CLK select MVEBU_ODMI + select MVEBU_PIC help This enables support for Marvell EBU familly, including: - Armada 3700 SoC Family @@ -108,7 +120,7 @@ config ARCH_QCOM config ARCH_ROCKCHIP bool "Rockchip Platforms" select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select PINCTRL select PINCTRL_ROCKCHIP select ROCKCHIP_TIMER @@ -154,13 +166,14 @@ config ARCH_STRATIX10 config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF select GENERIC_CLOCKEVENTS - select HAVE_CLK + select GPIOLIB select PINCTRL + select PM + select PM_GENERIC_DOMAINS select RESET_CONTROLLER help This enables support for the NVIDIA Tegra SoC family. @@ -183,8 +196,8 @@ config ARCH_UNIPHIER config ARCH_VEXPRESS bool "ARMv8 software model (Versatile Express)" - select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_VERSATILE + select GPIOLIB select PM select PM_GENERIC_DOMAINS select POWER_RESET_VEXPRESS @@ -204,6 +217,11 @@ config ARCH_XGENE help This enables support for AppliedMicro X-Gene SOC Family +config ARCH_ZX + bool "ZTE ZX SoC Family" + help + This enables support for ZTE ZX SoC Family + config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" help diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index 5b54f8c021d8..ab51aed6b6c1 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -18,6 +18,14 @@ ifneq ($(CONFIG_RELOCATABLE),) LDFLAGS_vmlinux += -pie -Bsymbolic endif +ifeq ($(CONFIG_ARM64_ERRATUM_843419),y) + ifeq ($(call ld-option, --fix-cortex-a53-843419),) +$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum) + else +LDFLAGS_vmlinux += --fix-cortex-a53-843419 + endif +endif + KBUILD_DEFCONFIG := defconfig # Check for binutils support for specific extensions @@ -38,10 +46,12 @@ ifeq ($(CONFIG_CPU_BIG_ENDIAN), y) KBUILD_CPPFLAGS += -mbig-endian AS += -EB LD += -EB +UTS_MACHINE := aarch64_be else KBUILD_CPPFLAGS += -mlittle-endian AS += -EL LD += -EL +UTS_MACHINE := aarch64 endif CHECKFLAGS += -D__aarch64__ diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 6e199c903676..6684f97c2722 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -19,6 +19,7 @@ dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx dts-dirs += lg +dts-dirs += zte subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 90a84c514d3d..e6e3491d48a5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -87,3 +87,14 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 62979076e250..03e3d76626dd 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -50,3 +50,9 @@ compatible = "amlogic,p200", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P200 Development Board"; }; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index f4f30f674b4c..06a34dc6002f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -57,6 +57,19 @@ device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; }; + + usb_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + /* signal name in schematic: USB_PWR_EN */ + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; /* This UART is brought out to the DB9 connector */ @@ -72,3 +85,25 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 54bb7c739089..73f159370188 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -52,6 +52,19 @@ chosen { stdout-path = "serial0:115200n8"; }; + + usb_vbus: regulator-usb0-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB0_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; &uart_AO { @@ -60,3 +73,32 @@ pinctrl-names = "default"; }; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; +}; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index bf6c8d051002..610e0e1c3cee 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -45,6 +45,9 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/meson-gxbb-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> +#include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/clock/gxbb-aoclkc.h> +#include <dt-bindings/reset/gxbb-aoclkc.h> / { compatible = "amlogic,meson-gxbb"; @@ -99,6 +102,30 @@ method = "smc"; }; + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -124,6 +151,25 @@ #size-cells = <2>; ranges; + usb0_phy: phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000000 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + status = "disabled"; + }; + + usb1_phy: phy@c0000020 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000020 0x0 0x20>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; + clock-names = "usb_general", "usb"; + status = "disabled"; + }; + cbus: cbus@c1100000 { compatible = "simple-bus"; reg = <0x0 0xc1100000 0x0 0x100000>; @@ -153,6 +199,27 @@ status = "disabled"; }; + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08650 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x086c0 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_C: serial@8700 { compatible = "amlogic,meson-uart"; reg = <0x0 0x8700 0x0 0x14>; @@ -160,6 +227,51 @@ clocks = <&xtal>; status = "disabled"; }; + + watchdog@98d0 { + compatible = "amlogic,meson-gxbb-wdt"; + reg = <0x0 0x098d0 0x0 0x10>; + clocks = <&xtal>; + }; + + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x08500 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087c0 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_C: i2c@87e0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087e0 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; gic: interrupt-controller@c4301000 { @@ -203,6 +315,56 @@ function = "uart_ao"; }; }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; + }; + }; + + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; + }; + }; + + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; + }; + }; + + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + }; + }; + }; + + clkc_AO: clock-controller@040 { + compatible = "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; }; uart_AO: serial@4c0 { @@ -212,6 +374,30 @@ clocks = <&xtal>; status = "disabled"; }; + + ir: ir@580 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x00580 0x0 0x40>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pwm_ab_AO: pwm@550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x0550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; periphs: periphs@c8834000 { @@ -251,6 +437,16 @@ }; }; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -263,6 +459,25 @@ }; }; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + uart_a_pins: uart_a { mux { groups = "uart_tx_a", @@ -287,6 +502,30 @@ }; }; + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + eth_pins: eth_c { mux { groups = "eth_mdio", @@ -306,6 +545,55 @@ function = "eth"; }; }; + + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; + + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; + }; + + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; + }; }; }; @@ -321,6 +609,15 @@ #clock-cells = <1>; reg = <0x0 0x0 0x0 0x3db>; }; + + mailbox: mailbox@404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0 0x404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; }; apb: apb@d0000000 { @@ -331,14 +628,40 @@ ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; }; + usb0: usb@c9000000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9000000 0x0 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c9100000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + ethmac: ethernet@c9410000 { - compatible = "amlogic,meson6-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - clocks = <&xtal>; - clock-names = "stmmaceth"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; phy-mode = "rgmii"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index b7fb5d9295c2..32a961c5e98a 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -74,6 +74,7 @@ &xgenet { status = "ok"; + rxlos-gpios = <&sbgpio 12 1>; }; &mmc0 { diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 1425ed41620c..72720e9132a1 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -26,6 +26,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_0>; + #clock-cells = <1>; + clocks = <&pmd0clk 0>; }; cpu@001 { device_type = "cpu"; @@ -34,6 +36,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_0>; + #clock-cells = <1>; + clocks = <&pmd0clk 0>; }; cpu@100 { device_type = "cpu"; @@ -42,6 +46,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_1>; + #clock-cells = <1>; + clocks = <&pmd1clk 0>; }; cpu@101 { device_type = "cpu"; @@ -50,6 +56,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_1>; + #clock-cells = <1>; + clocks = <&pmd1clk 0>; }; cpu@200 { device_type = "cpu"; @@ -58,6 +66,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_2>; + #clock-cells = <1>; + clocks = <&pmd2clk 0>; }; cpu@201 { device_type = "cpu"; @@ -66,6 +76,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_2>; + #clock-cells = <1>; + clocks = <&pmd2clk 0>; }; cpu@300 { device_type = "cpu"; @@ -74,6 +86,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_3>; + #clock-cells = <1>; + clocks = <&pmd3clk 0>; }; cpu@301 { device_type = "cpu"; @@ -82,6 +96,8 @@ enable-method = "spin-table"; cpu-release-addr = <0x1 0x0000fff8>; next-level-cache = <&xgene_L2_3>; + #clock-cells = <1>; + clocks = <&pmd3clk 0>; }; xgene_L2_0: l2-cache-0 { compatible = "cache"; @@ -223,6 +239,46 @@ clock-output-names = "refclk"; }; + pmdpll: pmdpll@170000f0 { + compatible = "apm,xgene-pcppll-v2-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + reg = <0x0 0x170000f0 0x0 0x10>; + clock-output-names = "pmdpll"; + }; + + pmd0clk: pmd0clk@7e200200 { + compatible = "apm,xgene-pmd-clock"; + #clock-cells = <1>; + clocks = <&pmdpll 0>; + reg = <0x0 0x7e200200 0x0 0x10>; + clock-output-names = "pmd0clk"; + }; + + pmd1clk: pmd1clk@7e200210 { + compatible = "apm,xgene-pmd-clock"; + #clock-cells = <1>; + clocks = <&pmdpll 0>; + reg = <0x0 0x7e200210 0x0 0x10>; + clock-output-names = "pmd1clk"; + }; + + pmd2clk: pmd2clk@7e200220 { + compatible = "apm,xgene-pmd-clock"; + #clock-cells = <1>; + clocks = <&pmdpll 0>; + reg = <0x0 0x7e200220 0x0 0x10>; + clock-output-names = "pmd2clk"; + }; + + pmd3clk: pmd3clk@7e200230 { + compatible = "apm,xgene-pmd-clock"; + #clock-cells = <1>; + clocks = <&pmdpll 0>; + reg = <0x0 0x7e200230 0x0 0x10>; + clock-output-names = "pmd3clk"; + }; + socpll: socpll@17000120 { compatible = "apm,xgene-socpll-v2-clock"; #clock-cells = <1>; @@ -453,6 +509,64 @@ }; }; + pmu: pmu@78810000 { + compatible = "apm,xgene-pmu-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + reg = <0x0 0x78810000 0x0 0x1000>; + interrupts = <0x0 0x22 0x4>; + + pmul3c@7e610000 { + compatible = "apm,xgene-pmu-l3c"; + reg = <0x0 0x7e610000 0x0 0x1000>; + }; + + pmuiob@7e940000 { + compatible = "apm,xgene-pmu-iob"; + reg = <0x0 0x7e940000 0x0 0x1000>; + }; + + pmucmcb@7e710000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e710000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmcb@7e730000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e730000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e810000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e810000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmc@7e850000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e850000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e890000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e890000 0x0 0x1000>; + enable-bit-index = <2>; + }; + + pmucmc@7e8d0000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e8d0000 0x0 0x1000>; + enable-bit-index = <3>; + }; + }; + mailbox: mailbox@10540000 { compatible = "apm,xgene-slimpro-mbox"; reg = <0x0 0x10540000 0x0 0x8000>; @@ -472,6 +586,11 @@ mboxes = <&mailbox 0>; }; + hwmonslimpro { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; + serial0: serial@10600000 { device_type = "serial"; compatible = "ns16550"; @@ -508,10 +627,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x10 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x11 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x12 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x13 0x4>; dma-coherent; clocks = <&pcie0clk 0>; msi-parent = <&v2m0>; @@ -533,10 +652,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0x0 0x0 0x16 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0x0 0x0 0x17 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0x0 0x0 0x18 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0x0 0x0 0x19 0x4>; dma-coherent; clocks = <&pcie1clk 0>; msi-parent = <&v2m0>; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c29dab9d1834..63be8e51eaa8 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -553,6 +553,64 @@ }; }; + pmu: pmu@78810000 { + compatible = "apm,xgene-pmu-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + reg = <0x0 0x78810000 0x0 0x1000>; + interrupts = <0x0 0x22 0x4>; + + pmul3c@7e610000 { + compatible = "apm,xgene-pmu-l3c"; + reg = <0x0 0x7e610000 0x0 0x1000>; + }; + + pmuiob@7e940000 { + compatible = "apm,xgene-pmu-iob"; + reg = <0x0 0x7e940000 0x0 0x1000>; + }; + + pmucmcb@7e710000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e710000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmcb@7e730000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e730000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e810000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e810000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmc@7e850000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e850000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e890000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e890000 0x0 0x1000>; + enable-bit-index = <2>; + }; + + pmucmc@7e8d0000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e8d0000 0x0 0x1000>; + enable-bit-index = <3>; + }; + }; + pcie0: pcie@1f2b0000 { status = "disabled"; device_type = "pci"; @@ -569,10 +627,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x4>; dma-coherent; clocks = <&pcie0clk 0>; msi-parent = <&msi>; @@ -594,10 +652,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x4>; dma-coherent; clocks = <&pcie1clk 0>; msi-parent = <&msi>; @@ -619,10 +677,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x4>; dma-coherent; clocks = <&pcie2clk 0>; msi-parent = <&msi>; @@ -644,10 +702,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x4>; dma-coherent; clocks = <&pcie3clk 0>; msi-parent = <&msi>; @@ -669,10 +727,10 @@ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x4 + 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x4 + 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x4 + 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x4>; dma-coherent; clocks = <&pcie4clk 0>; msi-parent = <&msi>; @@ -697,6 +755,11 @@ mboxes = <&mailbox 0>; }; + hwmonslimpro { + compatible = "apm,xgene-slimpro-hwmon"; + mboxes = <&mailbox 7>; + }; + serial0: serial@1c020000 { status = "disabled"; device_type = "serial"; @@ -923,7 +986,7 @@ /* mac address will be overwritten by the bootloader */ local-mac-address = [00 00 00 00 00 00]; phy-connection-type = "rgmii"; - phy-handle = <&menet0phy>,<&menetphy>; + phy-handle = <&menetphy>,<&menet0phy>; mdio { compatible = "apm,xgene-mdio"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index d4a12fad8afd..d95dc408629a 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -299,6 +299,14 @@ }; }; + pwm: pwm@66010000 { + compatible = "brcm,iproc-pwm"; + reg = <0x66010000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + mdio_mux_iproc: mdio-mux@6602023c { compatible = "brcm,mdio-mux-iproc"; reg = <0x6602023c 0x14>; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 162831546e18..6328a66ed97e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -10,6 +10,7 @@ */ #include <dt-bindings/clock/exynos7-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "samsung,exynos7"; @@ -473,10 +474,14 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff08>, - <1 14 0xff08>, - <1 11 0xff08>, - <1 10 0xff08>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; pmu_system_controller: system-controller@105c0000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 9d3e9fe1c87c..dd9e91941df4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -56,12 +56,14 @@ gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; - serial0 = &lpuart0; - serial1 = &lpuart1; - serial2 = &lpuart2; - serial3 = &lpuart3; - serial4 = &lpuart4; - serial5 = &lpuart5; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 40846319be69..d2313e05fd22 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -52,6 +52,14 @@ aliases { crypto = &crypto; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index a67e210e2019..58635f7f4668 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -247,6 +247,13 @@ bus-width = <4>; }; + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <0 144 0x4>; + big-endian; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index e8801faca996..b0dd010979e7 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -57,6 +57,9 @@ serial1 = &serial1; }; + chosen { + stdout-path = "serial0:115200n8"; + }; }; &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index e127f0baab19..ad0ebb8a1949 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -56,6 +56,10 @@ serial0 = &serial0; serial1 = &serial1; }; + + chosen { + stdout-path = "serial1:115200n8"; + }; }; &esdhc { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index e3b6034ea5d9..d1059765dfee 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -588,6 +588,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -612,6 +613,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -636,6 +638,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; num-lanes = <8>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -660,6 +663,7 @@ #address-cells = <3>; #size-cells = <2>; device_type = "pci"; + dma-coherent; num-lanes = <4>; bus-range = <0x0 0xff>; ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ @@ -715,4 +719,18 @@ interrupts = <0 12 4>; }; }; + + ddr1: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <0 17 0x4>; + little-endian; + }; + + ddr2: memory-controller@1090000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1090000 0x0 0x1000>; + interrupts = <0 18 0x4>; + little-endian; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index 593c7e43de79..dba3c131c62c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -29,16 +29,56 @@ * Reserve below regions from memory node: * * 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using + * 0x05f0,1000 - 0x05f0,1fff: Reboot reason * 0x06df,f000 - 0x06df,ffff: Mailbox message data * 0x0740,f000 - 0x0740,ffff: MCU firmware section + * 0x21f0,0000 - 0x21ff,ffff: pstore/ramoops buffer * 0x3e00,0000 - 0x3fff,ffff: OP-TEE */ memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x05e00000>, - <0x00000000 0x05f00000 0x00000000 0x00eff000>, + <0x00000000 0x05f00000 0x00000000 0x00001000>, + <0x00000000 0x05f02000 0x00000000 0x00efd000>, <0x00000000 0x06e00000 0x00000000 0x0060f000>, - <0x00000000 0x07410000 0x00000000 0x36bf0000>; + <0x00000000 0x07410000 0x00000000 0x1aaf0000>, + <0x00000000 0x22000000 0x00000000 0x1c000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@0x21f00000 { + compatible = "ramoops"; + reg = <0x0 0x21f00000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00000000 0x08000000>; + linux,cma-default; + }; + }; + + reboot-mode-syscon@5f01000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x05f01000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; }; soc { @@ -55,6 +95,8 @@ }; uart1: uart@f7111000 { + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; + assigned-clock-rates = <150000000>; status = "ok"; }; @@ -372,3 +414,43 @@ &uart3 { label = "LS-UART1"; }; + +&ade { + status = "ok"; +}; + +&dsi { + status = "ok"; + + ports { + /* 1 for output port */ + port@1 { + reg = <1>; + + dsi_out0: endpoint@0 { + remote-endpoint = <&adv7533_in>; + }; + }; + }; +}; + +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "ok"; + + adv7533: adv7533@39 { + compatible = "adi,adv7533"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <1 2>; + pd-gpio = <&gpio0 4 0>; + adi,dsi-lanes = <4>; + + port { + adv7533_in: endpoint { + remote-endpoint = <&dsi_out0>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 4f270410a5cb..17839db585d5 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -262,6 +262,11 @@ #clock-cells = <1>; }; + medianoc_ade: medianoc_ade@f4520000 { + compatible = "syscon"; + reg = <0x0 0xf4520000 0x0 0x4000>; + }; + stub_clock: stub_clock { compatible = "hisilicon,hi6220-stub-clk"; hisilicon,hi6220-clk-sram = <&sram>; @@ -766,6 +771,7 @@ interrupts = <0x0 0x48 0x4>; clocks = <&sys_ctrl 2>, <&sys_ctrl 1>; clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>; bus-width = <0x8>; vmmc-supply = <&ldo19>; pinctrl-names = "default"; @@ -779,12 +785,16 @@ card-detect-delay = <200>; hisilicon,peripheral-syscon = <&ao_ctrl>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; reg = <0x0 0xf723e000 0x0 0x1000>; interrupts = <0x0 0x49 0x4>; #address-cells = <0x1>; #size-cells = <0x0>; clocks = <&sys_ctrl 4>, <&sys_ctrl 3>; clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>; vqmmc-supply = <&ldo7>; vmmc-supply = <&ldo10>; bus-width = <0x4>; @@ -802,6 +812,7 @@ interrupts = <0x0 0x4a 0x4>; clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>; clock-names = "ciu", "biu"; + resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>; bus-width = <0x4>; broken-cd; pinctrl-names = "default", "idle"; @@ -850,5 +861,55 @@ }; }; }; + + ade: ade@f4100000 { + compatible = "hisilicon,hi6220-ade"; + reg = <0x0 0xf4100000 0x0 0x7800>; + reg-names = "ade_base"; + hisilicon,noc-syscon = <&medianoc_ade>; + resets = <&media_ctrl MEDIA_ADE>; + interrupts = <0 115 4>; /* ldi interrupt */ + + clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>, + <&media_ctrl HI6220_ADE_PIX_SRC>; + /*clock name*/ + clock-names = "clk_ade_core", + "clk_codec_jpeg", + "clk_ade_pix"; + + assigned-clocks = <&media_ctrl HI6220_ADE_CORE>, + <&media_ctrl HI6220_CODEC_JPEG>; + assigned-clock-rates = <360000000>, <288000000>; + dma-coherent; + status = "disabled"; + + port { + ade_out: endpoint { + remote-endpoint = <&dsi_in>; + }; + }; + }; + + dsi: dsi@f4107800 { + compatible = "hisilicon,hi6220-dsi"; + reg = <0x0 0xf4107800 0x0 0x100>; + clocks = <&media_ctrl HI6220_DSI_PCLK>; + clock-names = "pclk"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* 0 for input port */ + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <&ade_out>; + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi index bf322ed038b8..4b472a302cd8 100644 --- a/arch/arm64/boot/dts/hisilicon/hip05.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -300,11 +300,6 @@ clock-frequency = <200000000>; }; - peri_c_subctrl: syscon@80000000 { - compatible = "hisilicon,hip05-perisubc", "syscon"; - reg = < 0x0 0x80000000 0x0 0x10000>; - }; - uart0: uart@80300000 { compatible = "snps,dw-apb-uart"; reg = <0x0 0x80300000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi b/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi deleted file mode 100644 index b6a130c2e5a4..000000000000 --- a/arch/arm64/boot/dts/hisilicon/hip05_hns.dtsi +++ /dev/null @@ -1,180 +0,0 @@ -soc0: soc@000000000 { - #address-cells = <2>; - #size-cells = <2>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x0 0x0 0x0 0x0 0x1 0x0>; - chip-id = <0>; - - soc0_mdio0: mdio@803c0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "hisilicon,hns-mdio"; - reg = <0x0 0x803c0000 0x0 0x10000>; - subctrl-vbase = <&peri_c_subctrl>; - - soc0_phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - soc0_phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "ethernet-phy-ieee802.3-c22"; - }; - }; - - dsaf0: dsa@c7000000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "hisilicon,hns-dsaf-v1"; - mode = "6port-16rss"; - interrupt-parent = <&mbigen_dsa>; - - reg = <0x0 0xc5000000 0x0 0x890000 - 0x0 0xc7000000 0x0 0x60000 - >; - - reg-names = "ppe-base","dsaf-base"; - subctrl-syscon = <&dsaf_subctrl>; - reset-field-offset = <0>; - interrupts = < - /* [14] ge fifo err 8 / xge 6**/ - 149 0x4 150 0x4 151 0x4 152 0x4 - 153 0x4 154 0x4 26 0x4 27 0x4 - 155 0x4 156 0x4 157 0x4 158 0x4 159 0x4 160 0x4 - /* [12] rcb com 4*3**/ - 0x6 0x4 0x7 0x4 0x8 0x4 0x9 0x4 - 16 0x4 17 0x4 18 0x4 19 0x4 - 22 0x4 23 0x4 24 0x4 25 0x4 - /* [8] ppe tnl 0-7***/ - 0x0 0x4 0x1 0x4 0x2 0x4 0x3 0x4 - 0x4 0x4 0x5 0x4 12 0x4 13 0x4 - /* [21] dsaf event int 3+18**/ - 128 0x4 129 0x4 130 0x4 - 0x83 0x4 0x84 0x4 0x85 0x4 0x86 0x4 0x87 0x4 0x88 0x4 - 0x89 0x4 0x8a 0x4 0x8b 0x4 0x8c 0x4 0x8d 0x4 0x8e 0x4 - 0x8f 0x4 0x90 0x4 0x91 0x4 0x92 0x4 0x93 0x4 0x94 0x4 - /* [4] debug rcb 2*2*/ - 0xe 0x1 0xf 0x1 0x14 0x1 0x15 0x1 - /* [256] sevice rcb 2*128*/ - 0x180 0x1 0x181 0x1 0x182 0x1 0x183 0x1 - 0x184 0x1 0x185 0x1 0x186 0x1 0x187 0x1 - 0x188 0x1 0x189 0x1 0x18a 0x1 0x18b 0x1 - 0x18c 0x1 0x18d 0x1 0x18e 0x1 0x18f 0x1 - 0x190 0x1 0x191 0x1 0x192 0x1 0x193 0x1 - 0x194 0x1 0x195 0x1 0x196 0x1 0x197 0x1 - 0x198 0x1 0x199 0x1 0x19a 0x1 0x19b 0x1 - 0x19c 0x1 0x19d 0x1 0x19e 0x1 0x19f 0x1 - 0x1a0 0x1 0x1a1 0x1 0x1a2 0x1 0x1a3 0x1 - 0x1a4 0x1 0x1a5 0x1 0x1a6 0x1 0x1a7 0x1 - 0x1a8 0x1 0x1a9 0x1 0x1aa 0x1 0x1ab 0x1 - 0x1ac 0x1 0x1ad 0x1 0x1ae 0x1 0x1af 0x1 - 0x1b0 0x1 0x1b1 0x1 0x1b2 0x1 0x1b3 0x1 - 0x1b4 0x1 0x1b5 0x1 0x1b6 0x1 0x1b7 0x1 - 0x1b8 0x1 0x1b9 0x1 0x1ba 0x1 0x1bb 0x1 - 0x1bc 0x1 0x1bd 0x1 0x1be 0x1 0x1bf 0x1 - 0x1c0 0x1 0x1c1 0x1 0x1c2 0x1 0x1c3 0x1 - 0x1c4 0x1 0x1c5 0x1 0x1c6 0x1 0x1c7 0x1 - 0x1c8 0x1 0x1c9 0x1 0x1ca 0x1 0x1cb 0x1 - 0x1cc 0x1 0x1cd 0x1 0x1ce 0x1 0x1cf 0x1 - 0x1d0 0x1 0x1d1 0x1 0x1d2 0x1 0x1d3 0x1 - 0x1d4 0x1 0x1d5 0x1 0x1d6 0x1 0x1d7 0x1 - 0x1d8 0x1 0x1d9 0x1 0x1da 0x1 0x1db 0x1 - 0x1dc 0x1 0x1dd 0x1 0x1de 0x1 0x1df 0x1 - 0x1e0 0x1 0x1e1 0x1 0x1e2 0x1 0x1e3 0x1 - 0x1e4 0x1 0x1e5 0x1 0x1e6 0x1 0x1e7 0x1 - 0x1e8 0x1 0x1e9 0x1 0x1ea 0x1 0x1eb 0x1 - 0x1ec 0x1 0x1ed 0x1 0x1ee 0x1 0x1ef 0x1 - 0x1f0 0x1 0x1f1 0x1 0x1f2 0x1 0x1f3 0x1 - 0x1f4 0x1 0x1f5 0x1 0x1f6 0x1 0x1f7 0x1 - 0x1f8 0x1 0x1f9 0x1 0x1fa 0x1 0x1fb 0x1 - 0x1fc 0x1 0x1fd 0x1 0x1fe 0x1 0x1ff 0x1 - 0x200 0x1 0x201 0x1 0x202 0x1 0x203 0x1 - 0x204 0x1 0x205 0x1 0x206 0x1 0x207 0x1 - 0x208 0x1 0x209 0x1 0x20a 0x1 0x20b 0x1 - 0x20c 0x1 0x20d 0x1 0x20e 0x1 0x20f 0x1 - 0x210 0x1 0x211 0x1 0x212 0x1 0x213 0x1 - 0x214 0x1 0x215 0x1 0x216 0x1 0x217 0x1 - 0x218 0x1 0x219 0x1 0x21a 0x1 0x21b 0x1 - 0x21c 0x1 0x21d 0x1 0x21e 0x1 0x21f 0x1 - 0x220 0x1 0x221 0x1 0x222 0x1 0x223 0x1 - 0x224 0x1 0x225 0x1 0x226 0x1 0x227 0x1 - 0x228 0x1 0x229 0x1 0x22a 0x1 0x22b 0x1 - 0x22c 0x1 0x22d 0x1 0x22e 0x1 0x22f 0x1 - 0x230 0x1 0x231 0x1 0x232 0x1 0x233 0x1 - 0x234 0x1 0x235 0x1 0x236 0x1 0x237 0x1 - 0x238 0x1 0x239 0x1 0x23a 0x1 0x23b 0x1 - 0x23c 0x1 0x23d 0x1 0x23e 0x1 0x23f 0x1 - 0x240 0x1 0x241 0x1 0x242 0x1 0x243 0x1 - 0x244 0x1 0x245 0x1 0x246 0x1 0x247 0x1 - 0x248 0x1 0x249 0x1 0x24a 0x1 0x24b 0x1 - 0x24c 0x1 0x24d 0x1 0x24e 0x1 0x24f 0x1 - 0x250 0x1 0x251 0x1 0x252 0x1 0x253 0x1 - 0x254 0x1 0x255 0x1 0x256 0x1 0x257 0x1 - 0x258 0x1 0x259 0x1 0x25a 0x1 0x25b 0x1 - 0x25c 0x1 0x25d 0x1 0x25e 0x1 0x25f 0x1 - 0x260 0x1 0x261 0x1 0x262 0x1 0x263 0x1 - 0x264 0x1 0x265 0x1 0x266 0x1 0x267 0x1 - 0x268 0x1 0x269 0x1 0x26a 0x1 0x26b 0x1 - 0x26c 0x1 0x26d 0x1 0x26e 0x1 0x26f 0x1 - 0x270 0x1 0x271 0x1 0x272 0x1 0x273 0x1 - 0x274 0x1 0x275 0x1 0x276 0x1 0x277 0x1 - 0x278 0x1 0x279 0x1 0x27a 0x1 0x27b 0x1 - 0x27c 0x1 0x27d 0x1 0x27e 0x1 0x27f 0x1>; - buf-size = <4096>; - desc-num = <1024>; - dma-coherent; - - port@0 { - reg = <0>; - serdes-syscon = <&serdes_ctrl0>; - }; - port@1 { - reg = <1>; - serdes-syscon = <&serdes_ctrl0>; - }; - port@4 { - reg = <4>; - phy-handle = <&soc0_phy0>; - serdes-syscon = <&serdes_ctrl1>; - }; - port@5 { - reg = <5>; - phy-handle = <&soc0_phy1>; - serdes-syscon = <&serdes_ctrl1>; - }; - }; - - eth0: ethernet@0{ - compatible = "hisilicon,hns-nic-v1"; - ae-handle = <&dsaf0>; - port-idx-in-ae = <0>; - local-mac-address = [00 00 00 01 00 58]; - status = "disabled"; - dma-coherent; - }; - eth1: ethernet@1{ - compatible = "hisilicon,hns-nic-v1"; - ae-handle = <&dsaf0>; - port-idx-in-ae = <1>; - local-mac-address = [00 00 00 01 00 59]; - status = "disabled"; - dma-coherent; - }; - eth2: ethernet@4{ - compatible = "hisilicon,hns-nic-v1"; - ae-handle = <&dsaf0>; - port-idx-in-ae = <4>; - local-mac-address = [00 00 00 01 00 5a]; - status = "disabled"; - dma-coherent; - }; - eth3: ethernet@5{ - compatible = "hisilicon,hns-nic-v1"; - ae-handle = <&dsaf0>; - port-idx-in-ae = <5>; - local-mac-address = [00 00 00 01 00 5b]; - status = "disabled"; - dma-coherent; - }; -}; diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts index f3e5323e430b..f54b28359607 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts @@ -25,6 +25,34 @@ chosen { }; }; +ð0 { + status = "ok"; +}; + +ð1 { + status = "ok"; +}; + +ð2 { + status = "ok"; +}; + +ð3 { + status = "ok"; +}; + +&sas0 { + status = "ok"; +}; + +&sas1 { + status = "ok"; +}; + +&sas2 { + status = "ok"; +}; + &usb_ohci { status = "ok"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index 5927bc472f1b..b548763366dd 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -277,6 +277,39 @@ #interrupt-cells = <2>; num-pins = <2>; }; + + mbigen_sas1: intc_sas1 { + msi-parent = <&its_dsa 0x40000>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; + + mbigen_sas2: intc_sas2 { + msi-parent = <&its_dsa 0x40040>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; + }; + + mbigen_dsa@c0080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xc0080000 0x0 0x10000>; + + mbigen_dsaf0: intc_dsaf0 { + msi-parent = <&its_dsa 0x40800>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <409>; + }; + + mbigen_sas0: intc-sas0 { + msi-parent = <&its_dsa 0x40900>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <128>; + }; }; soc { @@ -302,6 +335,338 @@ dma-coherent; status = "disabled"; }; + + peri_c_subctrl: sub_ctrl_c@60000000 { + compatible = "hisilicon,peri-subctrl","syscon"; + reg = <0 0x60000000 0x0 0x10000>; + }; + + dsa_subctrl: dsa_subctrl@c0000000 { + compatible = "hisilicon,dsa-subctrl", "syscon"; + reg = <0x0 0xc0000000 0x0 0x10000>; + }; + + pcie_subctl: pcie_subctl@a0000000 { + compatible = "hisilicon,pcie-sas-subctrl", "syscon"; + reg = <0x0 0xa0000000 0x0 0x10000>; + }; + + serdes_ctrl: sds_ctrl@c2200000 { + compatible = "syscon"; + reg = <0 0xc2200000 0x0 0x80000>; + }; + + mdio@603c0000 { + compatible = "hisilicon,hns-mdio"; + reg = <0x0 0x603c0000 0x0 0x1000>; + subctrl-vbase = <&peri_c_subctrl 0x338 0xa38 0x531c 0x5a1c>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + + dsaf0: dsa@c7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "hisilicon,hns-dsaf-v2"; + mode = "6port-16rss"; + reg = <0x0 0xc5000000 0x0 0x890000 + 0x0 0xc7000000 0x0 0x600000>; + reg-names = "ppe-base", "dsaf-base"; + interrupt-parent = <&mbigen_dsaf0>; + subctrl-syscon = <&dsa_subctrl>; + reset-field-offset = <0>; + interrupts = + <576 1>, <577 1>, <578 1>, <579 1>, <580 1>, + <581 1>, <582 1>, <583 1>, <584 1>, <585 1>, + <586 1>, <587 1>, <588 1>, <589 1>, <590 1>, + <591 1>, <592 1>, <593 1>, <594 1>, <595 1>, + <596 1>, <597 1>, <598 1>, <599 1>, <600 1>, + <960 1>, <961 1>, <962 1>, <963 1>, <964 1>, + <965 1>, <966 1>, <967 1>, <968 1>, <969 1>, + <970 1>, <971 1>, <972 1>, <973 1>, <974 1>, + <975 1>, <976 1>, <977 1>, <978 1>, <979 1>, + <980 1>, <981 1>, <982 1>, <983 1>, <984 1>, + <985 1>, <986 1>, <987 1>, <988 1>, <989 1>, + <990 1>, <991 1>, <992 1>, <993 1>, <994 1>, + <995 1>, <996 1>, <997 1>, <998 1>, <999 1>, + <1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>, + <1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>, + <1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>, + <1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>, + <1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>, + <1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>, + <1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>, + <1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>, + <1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>, + <1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>, + <1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>, + <1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>, + <1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>, + <1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>, + <1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>, + <1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>, + <1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>, + <1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>, + <1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>, + <1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>, + <1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>, + <1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>, + <1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>, + <1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>, + <1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>, + <1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>, + <1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>, + <1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>, + <1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>, + <1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>, + <1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>, + <1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>, + <1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>, + <1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>, + <1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>, + <1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>, + <1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>, + <1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>, + <1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>, + <1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>, + <1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>, + <1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>, + <1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>, + <1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>, + <1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>, + <1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>, + <1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>, + <1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>, + <1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>, + <1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>, + <1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>, + <1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>, + <1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>, + <1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>, + <1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>, + <1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>, + <1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>, + <1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>, + <1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>, + <1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>, + <1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>, + <1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>, + <1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>, + <1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>, + <1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>, + <1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>, + <1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>, + <1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>, + <1340 1>, <1341 1>, <1342 1>, <1343 1>; + + desc-num = <0x400>; + buf-size = <0x1000>; + dma-coherent; + + port@0 { + reg = <0>; + serdes-syscon = <&serdes_ctrl>; + port-rst-offset = <0>; + port-mode-offset = <0>; + media-type = "fiber"; + }; + + port@1 { + reg = <1>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <1>; + port-mode-offset = <1>; + media-type = "fiber"; + }; + + port@4 { + reg = <4>; + phy-handle = <&phy0>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <4>; + port-mode-offset = <2>; + media-type = "copper"; + }; + + port@5 { + reg = <5>; + phy-handle = <&phy1>; + serdes-syscon= <&serdes_ctrl>; + port-rst-offset = <5>; + port-mode-offset = <3>; + media-type = "copper"; + }; + }; + + eth0: ethernet@4{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <4>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth1: ethernet@5{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <5>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth2: ethernet@0{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <0>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + eth3: ethernet@1{ + compatible = "hisilicon,hns-nic-v2"; + ae-handle = <&dsaf0>; + port-idx-in-ae = <1>; + local-mac-address = [00 00 00 00 00 00]; + status = "disabled"; + dma-coherent; + }; + + sas0: sas@c3000000 { + compatible = "hisilicon,hip06-sas-v2"; + reg = <0 0xc3000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&dsa_subctrl>; + ctrl-reset-reg = <0xa60>; + ctrl-reset-sts-reg = <0x5a30>; + ctrl-clock-ena-reg = <0x338>; + queue-count = <16>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_sas0>; + interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>, + <69 4>,<70 4>,<71 4>,<72 4>,<73 4>, + <75 4>,<76 4>,<77 4>,<78 4>,<79 4>, + <80 4>,<81 4>,<82 4>,<83 4>,<84 4>, + <85 4>,<86 4>,<87 4>,<88 4>,<89 4>, + <90 4>,<91 4>,<92 4>,<93 4>,<94 4>, + <95 4>,<96 4>,<97 4>,<98 4>,<99 4>, + <100 4>,<101 4>,<102 4>,<103 4>,<104 4>, + <105 4>,<106 4>,<107 4>,<108 4>,<109 4>, + <110 4>,<111 4>,<112 4>,<113 4>,<114 4>, + <115 4>,<116 4>,<117 4>,<118 4>,<119 4>, + <120 4>,<121 4>,<122 4>,<123 4>,<124 4>, + <125 4>,<126 4>,<127 4>,<128 4>,<129 4>, + <130 4>,<131 4>,<132 4>,<133 4>,<134 4>, + <135 4>,<136 4>,<137 4>,<138 4>,<139 4>, + <140 4>,<141 4>,<142 4>,<143 4>,<144 4>, + <145 4>,<146 4>,<147 4>,<148 4>,<149 4>, + <150 4>,<151 4>,<152 4>,<153 4>,<154 4>, + <155 4>,<156 4>,<157 4>,<158 4>,<159 4>, + <160 4>,<601 1>,<602 1>,<603 1>,<604 1>, + <605 1>,<606 1>,<607 1>,<608 1>,<609 1>, + <610 1>,<611 1>,<612 1>,<613 1>,<614 1>, + <615 1>,<616 1>,<617 1>,<618 1>,<619 1>, + <620 1>,<621 1>,<622 1>,<623 1>,<624 1>, + <625 1>,<626 1>,<627 1>,<628 1>,<629 1>, + <630 1>,<631 1>,<632 1>; + status = "disabled"; + }; + + sas1: sas@a2000000 { + compatible = "hisilicon,hip06-sas-v2"; + reg = <0 0xa2000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&pcie_subctl>; + am-max-trans; + ctrl-reset-reg = <0xa18>; + ctrl-reset-sts-reg = <0x5a0c>; + ctrl-clock-ena-reg = <0x318>; + queue-count = <16>; + phy-count = <8>; + dma-coherent; + interrupt-parent = <&mbigen_sas1>; + interrupts = <64 4>,<65 4>,<66 4>,<67 4>,<68 4>, + <69 4>,<70 4>,<71 4>,<72 4>,<73 4>, + <74 4>,<75 4>,<76 4>,<77 4>,<78 4>, + <79 4>,<80 4>,<81 4>,<82 4>,<83 4>, + <84 4>,<85 4>,<86 4>,<87 4>,<88 4>, + <89 4>,<90 4>,<91 4>,<92 4>,<93 4>, + <94 4>,<95 4>,<96 4>,<97 4>,<98 4>, + <99 4>,<100 4>,<101 4>,<102 4>,<103 4>, + <104 4>,<105 4>,<106 4>,<107 4>,<108 4>, + <109 4>,<110 4>,<111 4>,<112 4>,<113 4>, + <114 4>,<115 4>,<116 4>,<117 4>,<118 4>, + <119 4>,<120 4>,<121 4>,<122 4>,<123 4>, + <124 4>,<125 4>,<126 4>,<127 4>,<128 4>, + <129 4>,<130 4>,<131 4>,<132 4>,<133 4>, + <134 4>,<135 4>,<136 4>,<137 4>,<138 4>, + <139 4>,<140 4>,<141 4>,<142 4>,<143 4>, + <144 4>,<145 4>,<146 4>,<147 4>,<148 4>, + <149 4>,<150 4>,<151 4>,<152 4>,<153 4>, + <154 4>,<155 4>,<156 4>,<157 4>,<158 4>, + <159 4>,<576 1>,<577 1>,<578 1>,<579 1>, + <580 1>,<581 1>,<582 1>,<583 1>,<584 1>, + <585 1>,<586 1>,<587 1>,<588 1>,<589 1>, + <590 1>,<591 1>,<592 1>,<593 1>,<594 1>, + <595 1>,<596 1>,<597 1>,<598 1>,<599 1>, + <600 1>,<601 1>,<602 1>,<603 1>,<604 1>, + <605 1>,<606 1>,<607 1>; + status = "disabled"; + }; + + sas2: sas@a3000000 { + compatible = "hisilicon,hip06-sas-v2"; + reg = <0 0xa3000000 0 0x10000>; + sas-addr = [50 01 88 20 16 00 00 00]; + hisilicon,sas-syscon = <&pcie_subctl>; + ctrl-reset-reg = <0xae0>; + ctrl-reset-sts-reg = <0x5a70>; + ctrl-clock-ena-reg = <0x3a8>; + queue-count = <16>; + phy-count = <9>; + dma-coherent; + interrupt-parent = <&mbigen_sas2>; + interrupts = <192 4>,<193 4>,<194 4>,<195 4>,<196 4>, + <197 4>,<198 4>,<199 4>,<200 4>,<201 4>, + <202 4>,<203 4>,<204 4>,<205 4>,<206 4>, + <207 4>,<208 4>,<209 4>,<210 4>,<211 4>, + <212 4>,<213 4>,<214 4>,<215 4>,<216 4>, + <217 4>,<218 4>,<219 4>,<220 4>,<221 4>, + <222 4>,<223 4>,<224 4>,<225 4>,<226 4>, + <227 4>,<228 4>,<229 4>,<230 4>,<231 4>, + <232 4>,<233 4>,<234 4>,<235 4>,<236 4>, + <237 4>,<238 4>,<239 4>,<240 4>,<241 4>, + <242 4>,<243 4>,<244 4>,<245 4>,<246 4>, + <247 4>,<248 4>,<249 4>,<250 4>,<251 4>, + <252 4>,<253 4>,<254 4>,<255 4>,<256 4>, + <257 4>,<258 4>,<259 4>,<260 4>,<261 4>, + <262 4>,<263 4>,<264 4>,<265 4>,<266 4>, + <267 4>,<268 4>,<269 4>,<270 4>,<271 4>, + <272 4>,<273 4>,<274 4>,<275 4>,<276 4>, + <277 4>,<278 4>,<279 4>,<280 4>,<281 4>, + <282 4>,<283 4>,<284 4>,<285 4>,<286 4>, + <287 4>,<608 1>,<609 1>,<610 1>,<611 1>, + <612 1>,<613 1>,<614 1>,<615 1>,<616 1>, + <617 1>,<618 1>,<619 1>,<620 1>,<621 1>, + <622 1>,<623 1>,<624 1>,<625 1>,<626 1>, + <627 1>,<628 1>,<629 1>,<630 1>,<631 1>, + <632 1>,<633 1>,<634 1>,<635 1>,<636 1>, + <637 1>,<638 1>,<639 1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 308468d377d0..cf3953124cef 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb # Mvebu SoC Family dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 3753c1c6d54d..048e5cf5160e 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -47,6 +47,7 @@ #include "armada-ap806-dual.dtsi" #include "armada-cp110-master.dtsi" +#include "armada-cp110-slave.dtsi" / { model = "Marvell Armada 8020"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts new file mode 100644 index 000000000000..6e6f182fb297 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -0,0 +1,150 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada 8040 Development board platform + */ + +#include "armada-8040.dtsi" + +/ { + model = "Marvell Armada 8040 DB board"; + compatible = "marvell,armada8040-db", "marvell,armada8040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +/* Accessible over the mini-USB CON9 connector on the main board */ +&uart0 { + status = "okay"; +}; + + +/* CON5 on CP0 expansion */ +&cpm_pcie2 { + status = "okay"; +}; + +&cpm_i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +/* CON4 on CP0 expansion */ +&cpm_sata0 { + status = "okay"; +}; + +/* CON9 on CP0 expansion */ +&cpm_usb3_0 { + status = "okay"; +}; + +/* CON10 on CP0 expansion */ +&cpm_usb3_1 { + status = "okay"; +}; + +/* CON5 on CP1 expansion */ +&cps_pcie2 { + status = "okay"; +}; + +&cps_i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +/* CON4 on CP1 expansion */ +&cps_sata0 { + status = "okay"; +}; + +/* CON9 on CP1 expansion */ +&cps_usb3_0 { + status = "okay"; +}; + +/* CON10 on CP1 expansion */ +&cps_usb3_1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 8bd0d8f8ad4c..9c1b28c47683 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -47,6 +47,7 @@ #include "armada-ap806-quad.dtsi" #include "armada-cp110-master.dtsi" +#include "armada-cp110-slave.dtsi" / { model = "Marvell Armada 8040"; diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index c2a6745f168c..7b6136182ad0 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -128,6 +128,12 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + odmi: odmi@300000 { compatible = "marvell,odmi-controller"; interrupt-controller; @@ -140,6 +146,14 @@ marvell,spi-base = <128>, <136>, <144>, <152>; }; + pic: interrupt-controller@3f0100 { + compatible = "marvell,armada-8k-pic"; + reg = <0x3f0100 0x10>; + #interrupt-cells = <1>; + interrupt-controller; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + xor@400000 { compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; reg = <0x400000 0x1000>, diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index da31bbbbb59e..e5e3ed678b6f 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -176,6 +176,7 @@ #interrupt-cells = <1>; device_type = "pci"; dma-coherent; + msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; ranges = @@ -201,6 +202,7 @@ #interrupt-cells = <1>; device_type = "pci"; dma-coherent; + msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; ranges = @@ -227,6 +229,7 @@ #interrupt-cells = <1>; device_type = "pci"; dma-coherent; + msi-parent = <&gic_v2m0>; bus-range = <0 0xff>; ranges = diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi new file mode 100644 index 000000000000..842fb333285c --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -0,0 +1,249 @@ +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Device Tree file for Marvell Armada CP110 Slave. + */ + +/ { + cp110-slave { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + config-space { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0xf4000000 0x2000000>; + + cps_syscon0: system-controller@440000 { + compatible = "marvell,cp110-system-controller0", + "syscon"; + reg = <0x440000 0x1000>; + #clock-cells = <2>; + core-clock-output-names = + "cps-apll", "cps-ppv2-core", "cps-eip", + "cps-core", "cps-nand-core"; + gate-clock-output-names = + "cps-audio", "cps-communit", "cps-nand", + "cps-ppv2", "cps-sdio", "cps-mg-domain", + "cps-mg-core", "cps-xor1", "cps-xor0", + "cps-gop-dp", "none", "cps-pcie_x10", + "cps-pcie_x11", "cps-pcie_x4", "cps-pcie-xor", + "cps-sata", "cps-sata-usb", "cps-main", + "cps-sd-mmc", "none", "none", + "cps-slow-io", "cps-usb3h0", "cps-usb3h1", + "cps-usb3dev", "cps-eip150", "cps-eip197"; + }; + + cps_sata0: sata@540000 { + compatible = "marvell,armada-8k-ahci"; + reg = <0x540000 0x30000>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 15>; + status = "disabled"; + }; + + cps_usb3_0: usb3@500000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x500000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 22>; + status = "disabled"; + }; + + cps_usb3_1: usb3@510000 { + compatible = "marvell,armada-8k-xhci", + "generic-xhci"; + reg = <0x510000 0x4000>; + dma-coherent; + interrupts = <GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 23>; + status = "disabled"; + }; + + cps_xor0: xor@6a0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6a0000 0x1000>, + <0x6b0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&cps_syscon0 1 8>; + }; + + cps_xor1: xor@6c0000 { + compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; + reg = <0x6c0000 0x1000>, + <0x6d0000 0x1000>; + dma-coherent; + msi-parent = <&gic_v2m0>; + clocks = <&cps_syscon0 1 7>; + }; + + cps_spi0: spi@700600 { + compatible = "marvell,armada-380-spi"; + reg = <0x700600 0x50>; + #address-cells = <0x1>; + #size-cells = <0x0>; + cell-index = <1>; + clocks = <&cps_syscon0 0 3>; + status = "disabled"; + }; + + cps_spi1: spi@700680 { + compatible = "marvell,armada-380-spi"; + reg = <0x700680 0x50>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + clocks = <&cps_syscon0 1 21>; + status = "disabled"; + }; + + cps_i2c0: i2c@701000 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 21>; + status = "disabled"; + }; + + cps_i2c1: i2c@701100 { + compatible = "marvell,mv78230-i2c"; + reg = <0x701100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 21>; + status = "disabled"; + }; + }; + + cps_pcie0: pcie@f4600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf4600000 0 0x10000>, + <0 0xfaf00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xfd000000 0 0xfd000000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&cps_syscon0 1 13>; + status = "disabled"; + }; + + cps_pcie1: pcie@f4620000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf4620000 0 0x10000>, + <0 0xfbf00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xfd010000 0 0xfd010000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cps_syscon0 1 11>; + status = "disabled"; + }; + + cps_pcie2: pcie@f4640000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0 0xf4640000 0 0x10000>, + <0 0xfcf00000 0 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + bus-range = <0 0xff>; + ranges = + /* downstream I/O */ + <0x81000000 0 0xfd020000 0 0xfd020000 0 0x10000 + /* non-prefetchable memory */ + 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>; + + num-lanes = <1>; + clocks = <&cps_syscon0 1 12>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index 099ad93bb49b..85c23facb9fe 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -68,6 +68,7 @@ device_type = "cpu"; reg = <0x0>; enable-method = "psci"; + next-level-cache = <&l2>; cpu-idle-states = <&CPU_SLEEP_0>; }; @@ -76,6 +77,7 @@ device_type = "cpu"; reg = <0x1>; enable-method = "psci"; + next-level-cache = <&l2>; cpu-idle-states = <&CPU_SLEEP_0>; }; @@ -84,6 +86,7 @@ device_type = "cpu"; reg = <0x2>; enable-method = "psci"; + next-level-cache = <&l2>; cpu-idle-states = <&CPU_SLEEP_0>; }; @@ -92,9 +95,14 @@ device_type = "cpu"; reg = <0x3>; enable-method = "psci"; + next-level-cache = <&l2>; cpu-idle-states = <&CPU_SLEEP_0>; }; + l2: cache { + compatible = "cache"; + }; + idle-states { entry-method = "psci"; CPU_SLEEP_0: cpu-sleep-0 { @@ -115,7 +123,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, @@ -279,7 +287,6 @@ reg = <0x4000 0x100>; clocks = <&osc>; interrupts = <1>; - status = "disabled"; }; wdt2: watchdog@5000 { @@ -287,7 +294,6 @@ reg = <0x5000 0x100>; clocks = <&osc>; interrupts = <2>; - status = "disabled"; }; sm_gpio0: gpio@8000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 7453a47b3047..2a7f731c7759 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -42,6 +42,44 @@ gpio = <&pio 130 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + connector { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "d"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; +}; + +&cec { + status = "okay"; +}; + +&dpi0 { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + hdmi0_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; }; &i2c1 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 10f638f4e7d8..1c71e256601d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -254,6 +254,16 @@ <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + hdmi_pin: xxx { + + /*hdmi htplg pin*/ + pins1 { + pinmux = <MT8173_PIN_21_HTPLG__FUNC_HTPLG>; + input-enable; + bias-pull-down; + }; + }; + i2c0_pins_a: i2c0 { pins1 { pinmux = <MT8173_PIN_45_SDA0__FUNC_SDA0>, @@ -341,6 +351,14 @@ clock-names = "spi", "wrap"; }; + cec: cec@10013000 { + compatible = "mediatek,mt8173-cec"; + reg = <0 0x10013000 0 0xbc>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_CEC>; + status = "disabled"; + }; + vpu: vpu@10020000 { compatible = "mediatek,mt8173-vpu"; reg = <0 0x10020000 0 0x30000>, @@ -383,6 +401,19 @@ #clock-cells = <1>; }; + hdmi_phy: hdmi-phy@10209100 { + compatible = "mediatek,mt8173-hdmi-phy"; + reg = <0 0x10209100 0 0x24>; + clocks = <&apmixedsys CLK_APMIXED_HDMI_REF>; + clock-names = "pll_ref"; + clock-output-names = "hdmitx_dig_cts"; + mediatek,ibias = <0xa>; + mediatek,ibias_up = <0x1c>; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + mipi_tx0: mipi-dphy@10215000 { compatible = "mediatek,mt8173-mipi-tx"; reg = <0 0x10215000 0 0x1000>; @@ -577,6 +608,14 @@ status = "disabled"; }; + hdmiddc0: i2c@11012000 { + compatible = "mediatek,mt8173-hdmi-ddc"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_LOW>; + reg = <0 0x11012000 0 0x1C>; + clocks = <&pericfg CLK_PERI_I2C5>; + clock-names = "ddc-i2c"; + }; + i2c6: i2c@11013000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11013000 0 0x70>, @@ -885,6 +924,12 @@ <&apmixedsys CLK_APMIXED_TVDPLL>; clock-names = "pixel", "engine", "pll"; status = "disabled"; + + port { + dpi0_out: endpoint { + remote-endpoint = <&hdmi0_in>; + }; + }; }; pwm0: pwm@1401e000 { @@ -942,6 +987,38 @@ clocks = <&mmsys CLK_MM_DISP_OD>; }; + hdmi0: hdmi@14025000 { + compatible = "mediatek,mt8173-hdmi"; + reg = <0 0x14025000 0 0x400>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_LOW>; + clocks = <&mmsys CLK_MM_HDMI_PIXEL>, + <&mmsys CLK_MM_HDMI_PLLCK>, + <&mmsys CLK_MM_HDMI_AUDIO>, + <&mmsys CLK_MM_HDMI_SPDIF>; + clock-names = "pixel", "pll", "bclk", "spdif"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pin>; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + mediatek,syscon-hdmi = <&mmsys 0x900>; + assigned-clocks = <&topckgen CLK_TOP_HDMI_SEL>; + assigned-clock-parents = <&hdmi_phy>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; + }; + }; + larb4: larb@14027000 { compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x14027000 0 0x1000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts index 431266a48e9c..c2becb603e11 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts @@ -27,6 +27,12 @@ reg = <0x0 0x80000000 0x0 0xc0000000>; }; + host1x@50000000 { + dpaux: dpaux@545c0000 { + status = "okay"; + }; + }; + pinmux: pinmux@700008d4 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1556,6 +1562,46 @@ }; }; + i2c@7000d100 { + status = "okay"; + clock-frequency = <400000>; + + nau8825@1a { + compatible = "nuvoton,nau8825"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(E, 6) IRQ_TYPE_LEVEL_LOW>; + clocks = <&tegra_car TEGRA210_CLK_CLK_OUT_2>; + clock-names = "mclk"; + + nuvoton,jkdet-enable; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,vref-impedance = <2>; + nuvoton,micbias-voltage = <6>; + nuvoton,sar-threshold-num = <4>; + nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>; + nuvoton,sar-hysteresis = <1>; + nuvoton,sar-voltage = <0>; + nuvoton,sar-compare-time = <0>; + nuvoton,sar-sampling-time = <0>; + nuvoton,short-key-debounce = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <7>; + status = "okay"; + }; + + audio-codec@2d { + compatible = "realtek,rt5677"; + reg = <0x2d>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_LEVEL_HIGH>; + realtek,reset-gpio = <&gpio TEGRA_GPIO(BB, 3) GPIO_ACTIVE_LOW>; + gpio-controller; + #gpio-cells = <2>; + status = "okay"; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <0>; @@ -1568,12 +1614,81 @@ status = "okay"; }; + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-6}>; + phy-names = "usb2-0", "usb3-0"; + + dvddio-pex-supply = <&avddio_1v05>; + hvddio-pex-supply = <&pp1800>; + avdd-usb-supply = <&pp3300>; + avdd-pll-utmip-supply = <&pp1800>; + avdd-pll-uerefe-supply = <&pp1050_avdd>; + dvdd-pex-pll-supply = <&avddio_1v05>; + hvdd-pex-pll-e-supply = <&pp1800>; + + status = "okay"; + }; + + padctl@7009f000 { + status = "okay"; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-6 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + vbus-supply = <&usbc_vbus>; + mode = "otg"; + }; + + usb3-0 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + sdhci@700b0600 { bus-width = <8>; non-removable; status = "okay"; }; + aconnect@702c0000 { + status = "okay"; + + dma@702e2000 { + status = "okay"; + }; + + agic@702f9000 { + status = "okay"; + }; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; @@ -1646,6 +1761,11 @@ }; }; + max98357a { + compatible = "maxim,max98357a"; + status = "okay"; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index c4cfdcf60d26..f6739797150a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -34,6 +34,7 @@ clock-names = "dpaux", "parent"; resets = <&tegra_car 207>; reset-names = "dpaux"; + power-domains = <&pd_sor>; status = "disabled"; state_dpaux1_aux: pinmux-aux { @@ -108,6 +109,7 @@ clock-names = "dsi", "lp", "parent"; resets = <&tegra_car 48>; reset-names = "dsi"; + power-domains = <&pd_sor>; nvidia,mipi-calibrate = <&mipi 0x0c0>; /* DSIA & DSIB pads */ status = "disabled"; @@ -137,6 +139,7 @@ clock-names = "dsi", "lp", "parent"; resets = <&tegra_car 82>; reset-names = "dsi"; + power-domains = <&pd_sor>; nvidia,mipi-calibrate = <&mipi 0x300>; /* DSIC & DSID pads */ status = "disabled"; @@ -178,6 +181,7 @@ pinctrl-1 = <&state_dpaux_i2c>; pinctrl-2 = <&state_dpaux_off>; pinctrl-names = "aux", "i2c", "off"; + power-domains = <&pd_sor>; status = "disabled"; }; @@ -197,6 +201,7 @@ pinctrl-1 = <&state_dpaux1_i2c>; pinctrl-2 = <&state_dpaux1_off>; pinctrl-names = "aux", "i2c", "off"; + power-domains = <&pd_sor>; status = "disabled"; }; @@ -209,6 +214,7 @@ clock-names = "dpaux", "parent"; resets = <&tegra_car 181>; reset-names = "dpaux"; + power-domains = <&pd_sor>; status = "disabled"; state_dpaux_aux: pinmux-aux { @@ -325,7 +331,7 @@ }; gpio: gpio@6000d000 { - compatible = "nvidia,tegra210-gpio", "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; + compatible = "nvidia,tegra210-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, @@ -648,27 +654,41 @@ #power-domain-cells = <0>; }; + pd_sor: sor { + clocks = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR1>, + <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_DSIA>, + <&tegra_car TEGRA210_CLK_DSIB>, + <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_DPAUX1>, + <&tegra_car TEGRA210_CLK_MIPI_CAL>; + resets = <&tegra_car TEGRA210_CLK_SOR0>, + <&tegra_car TEGRA210_CLK_SOR1>, + <&tegra_car TEGRA210_CLK_CSI>, + <&tegra_car TEGRA210_CLK_DSIA>, + <&tegra_car TEGRA210_CLK_DSIB>, + <&tegra_car TEGRA210_CLK_DPAUX>, + <&tegra_car TEGRA210_CLK_DPAUX1>, + <&tegra_car TEGRA210_CLK_MIPI_CAL>; + #power-domain-cells = <0>; + }; + pd_xusbss: xusba { clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>; - clock-names = "xusb-ss"; resets = <&tegra_car TEGRA210_CLK_XUSB_SS>; - reset-names = "xusb-ss"; #power-domain-cells = <0>; }; pd_xusbdev: xusbb { clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>; - clock-names = "xusb-dev"; resets = <&tegra_car 95>; - reset-names = "xusb-dev"; #power-domain-cells = <0>; }; pd_xusbhost: xusbc { clocks = <&tegra_car TEGRA210_CLK_XUSB_HOST>; - clock-names = "xusb-host"; resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; - reset-names = "xusb-host"; #power-domain-cells = <0>; }; }; @@ -948,6 +968,7 @@ reg = <0x0 0x700e3000 0x0 0x100>; clocks = <&tegra_car TEGRA210_CLK_MIPI_CAL>; clock-names = "mipi-cal"; + power-domains = <&pd_sor>; #nvidia,mipi-calibrate-cells = <1>; }; @@ -961,6 +982,50 @@ #size-cells = <1>; ranges = <0x702c0000 0x0 0x702c0000 0x00040000>; status = "disabled"; + + adma: dma@702e2000 { + compatible = "nvidia,tegra210-adma"; + reg = <0x702e2000 0x2000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&tegra_car TEGRA210_CLK_D_AUDIO>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: agic@702f9000 { + compatible = "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x702f9000 0x2000>, + <0x702fa000 0x2000>; + interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&tegra_car TEGRA210_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; }; spi@70410000 { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index fa1f661ccccf..5dd05de5619b 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi index ee828a8a8236..e1e6c6b5c489 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -24,4 +24,52 @@ bias-pull-up; }; }; + + adv7533_int_active: adv533_int_active { + pinmux { + function = "gpio"; + pins = "gpio31"; + }; + pinconf { + pins = "gpio31"; + drive-strength = <16>; + bias-disable; + }; + }; + + adv7533_int_suspend: adv7533_int_suspend { + pinmux { + function = "gpio"; + pins = "gpio31"; + }; + pinconf { + pins = "gpio31"; + drive-strength = <2>; + bias-disable; + }; + }; + + adv7533_switch_active: adv7533_switch_active { + pinmux { + function = "gpio"; + pins = "gpio32"; + }; + pinconf { + pins = "gpio32"; + drive-strength = <16>; + bias-disable; + }; + }; + + adv7533_switch_suspend: adv7533_switch_suspend { + pinmux { + function = "gpio"; + pins = "gpio32"; + }; + pinconf { + pins = "gpio32"; + drive-strength = <2>; + bias-disable; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 18639bc0a506..bb062b547110 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -63,6 +63,47 @@ /* On High speed expansion */ label = "HS-I2C2"; status = "okay"; + + adv_bridge: bridge@39 { + status = "okay"; + + compatible = "adi,adv7533"; + reg = <0x39>; + + interrupt-parent = <&msmgpio>; + interrupts = <31 2>; + + adi,dsi-lanes = <4>; + + pd-gpios = <&msmgpio 32 0>; + + avdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; }; i2c@78ba000 { @@ -180,6 +221,36 @@ lpass@07708000 { status = "okay"; }; + + mdss@1a00000 { + status = "okay"; + + mdp@1a01000 { + status = "okay"; + }; + + dsi@1a98000 { + status = "okay"; + + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&adv7533_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@1a98300 { + status = "okay"; + + vddio-supply = <&pm8916_l6>; + }; + }; }; usb2513 { @@ -194,6 +265,17 @@ pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; }; &smd_rpm_regulators { diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi new file mode 100644 index 000000000000..24552f19b3fa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +&msmgpio { + sdc2_cd_on: sdc2_cd_on { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <16>; /* 16 MA */ + }; + }; + + sdc2_cd_off: sdc2_cd_off { + mux { + pins = "gpio38"; + function = "gpio"; + }; + + config { + pins = "gpio38"; + bias-pull-up; /* pull up */ + drive-strength = <2>; /* 2 MA */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts new file mode 100644 index 000000000000..230e9c8484ac --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "apq8096-db820c.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. DB820c"; + compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi new file mode 100644 index 000000000000..afb218cffc60 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright (c) 2014-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8996.dtsi" +#include "apq8096-db820c-pins.dtsi" + +/ { + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp2_uart2; + i2c0 = &blsp1_i2c2; + i2c1 = &blsp2_i2c1; + i2c2 = &blsp2_i2c0; + spi0 = &blsp1_spi0; + spi1 = &blsp2_spi5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@75b0000 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_2pins_default>; + pinctrl-1 = <&blsp2_uart1_2pins_sleep>; + }; + + serial@75b1000 { + label = "LS-UART0"; + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_4pins_default>; + pinctrl-1 = <&blsp2_uart2_4pins_sleep>; + }; + + i2c@07577000 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; + }; + + i2c@075b6000 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; + }; + + spi@07575000 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; + }; + + i2c@075b5000 { + /* On High speed expansion */ + label = "HS-I2C2"; + status = "okay"; + }; + + spi@075ba000{ + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; + }; + + sdhci@74a4900 { + /* External SD card */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + cd-gpios = <&msmgpio 38 0x1>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 11bdc24cfc74..466ca5705c99 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -86,6 +86,11 @@ reg = <0x0 0x89300000 0x0 0x600000>; no-map; }; + + mba_mem: mba@8ea00000 { + no-map; + reg = <0 0x8ea00000 0 0x100000>; + }; }; cpus { @@ -155,6 +160,49 @@ interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -187,10 +235,11 @@ }; firmware { - scm { + scm: scm { compatible = "qcom,scm"; clocks = <&gcc GCC_CRYPTO_CLK>, <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>; clock-names = "core", "bus", "iface"; + #reset-cells = <1>; }; }; @@ -228,6 +277,11 @@ reg = <0x1905000 0x20000>; }; + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x1937000 0x30000>; + }; + tcsr_mutex: hwlock { compatible = "qcom,tcsr-mutex"; syscon = <&tcsr_mutex_regs 0 0x1000>; @@ -483,7 +537,7 @@ compatible = "qcom,ci-hdrc"; reg = <0x78d9000 0x400>; dr_mode = "peripheral"; - interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb_otg>; status = "disabled"; }; @@ -491,7 +545,7 @@ usb_host: ehci@78d9000 { compatible = "qcom,ehci-host"; reg = <0x78d9000 0x400>; - interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; usb-phy = <&usb_otg>; status = "disabled"; }; @@ -499,8 +553,8 @@ usb_otg: phy@78d9000 { compatible = "qcom,usb-otg-snps"; reg = <0x78d9000 0x400>; - interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>, - <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; qcom,vdd-levels = <500000 1000000 1320000>; qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>; @@ -594,7 +648,7 @@ <0x200a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -609,6 +663,144 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + + qfprom: qfprom@5c000 { + compatible = "qcom,qfprom"; + reg = <0x5c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0xd0 0x8>; + }; + tsens_calsel: calsel@ec { + reg = <0xec 0x4>; + }; + }; + + tsens: thermal-sensor@4a8000 { + compatible = "qcom,msm8916-tsens"; + reg = <0x4a8000 0x2000>; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; + #thermal-sensor-cells = <1>; + }; + + mdss: mdss@1a00000 { + compatible = "qcom,mdss"; + reg = <0x1a00000 0x1000>, + <0x1ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "vsync_clk"; + + interrupts = <0 72 0>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x1a01000 0x90000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface_clk", + "bus_clk", + "core_clk", + "vsync_clk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0x1a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 0>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core_clk", + "iface_clk", + "bus_clk", + "byte_clk", + "pixel_clk", + "core_clk"; + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: dsi-phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x1a98300 0xd4>, + <0x1a98500 0x280>, + <0x1a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>; + clock-names = "iface_clk"; + }; + }; }; smd { @@ -657,6 +849,88 @@ }; }; }; + + hexagon-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + wcnss-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 0 13>; + qcom,ipc-6 = <&apcs 0 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; }; #include "msm8916-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 55ec3e8326b7..338f82a7fdc7 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -97,6 +97,92 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu_alert0: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpu_alert1: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit1: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu_alert2: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit2: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu_alert3: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit3: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -181,6 +267,12 @@ status = "disabled"; }; + tsens0: thermal-sensor@4a8000 { + compatible = "qcom,msm8996-tsens"; + reg = <0x4a8000 0x2000>; + #thermal-sensor-cells = <1>; + }; + blsp2_uart1: serial@75b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x75b0000 0x1000>; @@ -339,7 +431,7 @@ <0x400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 17139f7003a6..eb72830ec9eb 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts new file mode 100644 index 000000000000..bcb11a868343 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -0,0 +1,328 @@ +/* + * Device Tree Source for the H3ULCB board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7795.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas H3ULCB board based on r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795"; + + aliases { + serial0 = &scif2; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + rsnd_ak4613: sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&ak4613>; + }; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + avb_pins: avb { + groups = "avb_mdc"; + function = "avb"; + }; + + sdhi0_pins_3v3: sd0_3v3 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_1v8: sd0_1v8 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound-clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", + "audio_clkout_a", "audio_clkout3_a"; + function = "audio_clk"; + }; + + usb1_pins: usb1 { + groups = "usb1"; + function = "usb1"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + }; + + cs2000: clk-multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE R8A7795_CLK_S0D4>; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + capture = <&ssi1 &src1 &dvc1>; + }; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins_3v3>; + pinctrl-1 = <&sdhi0_pins_1v8>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + renesas,no-ether-link; + phy-handle = <&phy0>; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <900>; + rxdv-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txc-skew-ps = <900>; + txen-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 98f02631a0f0..b1eab6876f8c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -110,6 +110,17 @@ 1800000 0>; }; + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + audio_clkout: audio_clkout { /* * This is same as <&rcar_sound 0> @@ -135,6 +146,52 @@ sound-dai = <&ak4613>; }; }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; }; &extal_clk { @@ -172,6 +229,11 @@ function = "avb"; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; + function = "du"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -193,6 +255,11 @@ function = "audio_clk"; }; + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + usb1_pins: usb1 { groups = "usb1"; function = "usb1"; @@ -369,6 +436,14 @@ status = "okay"; }; +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + &usb2_phy1 { pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; @@ -383,6 +458,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -391,6 +470,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -399,6 +482,10 @@ status = "okay"; }; +&hsusb { + status = "okay"; +}; + &pcie_bus_clk { clock-frequency = <100000000>; status = "okay"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index b902356873c2..8c15040f2540 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -328,7 +328,8 @@ }; audma0: dma-controller@ec700000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; reg = <0 0xec700000 0 0x10000>; interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH @@ -360,7 +361,8 @@ }; audma1: dma-controller@ec720000 { - compatible = "renesas,rcar-dmac"; + compatible = "renesas,dmac-r8a7795", + "renesas,rcar-dmac"; reg = <0 0xec720000 0 0x10000>; interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH @@ -1098,6 +1100,7 @@ reg = <0 0xee100000 0 0x2000>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1107,6 +1110,7 @@ reg = <0 0xee120000 0 0x2000>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1116,8 +1120,8 @@ reg = <0 0xee140000 0 0x2000>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - cap-mmc-highspeed; status = "disabled"; }; @@ -1126,8 +1130,8 @@ reg = <0 0xee160000 0 0x2000>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - cap-mmc-highspeed; status = "disabled"; }; @@ -1224,6 +1228,23 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7795", + "renesas,rcar-gen3-usbhs"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 704>; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; + renesas,buswait = <11>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + status = "disabled"; + }; + pciec0: pcie@fe000000 { compatible = "renesas,pcie-r8a7795"; reg = <0 0xfe000000 0 0x80000>; @@ -1273,5 +1294,252 @@ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; status = "disabled"; }; + + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + + renesas,fcp = <&fcpvb1>; + }; + + fcpvb1: fcp@fe92f000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfe92f000 0 0x200>; + clocks = <&cpg CPG_MOD 606>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + fcpf0: fcp@fe950000 { + compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + reg = <0 0xfe950000 0 0x200>; + clocks = <&cpg CPG_MOD 615>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + fcpf1: fcp@fe951000 { + compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + reg = <0 0xfe951000 0 0x200>; + clocks = <&cpg CPG_MOD 614>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + fcpf2: fcp@fe952000 { + compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + reg = <0 0xfe952000 0 0x200>; + clocks = <&cpg CPG_MOD 613>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7795_PD_A3VP>; + + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7795_PD_A3VP>; + + renesas,fcp = <&fcpvi0>; + }; + + fcpvi0: fcp@fe9af000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A7795_PD_A3VP>; + + renesas,fcp = <&fcpvi1>; + }; + + fcpvi1: fcp@fe9bf000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfe9bf000 0 0x200>; + clocks = <&cpg CPG_MOD 610>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; + power-domains = <&sysc R8A7795_PD_A3VP>; + + renesas,fcp = <&fcpvi2>; + }; + + fcpvi2: fcp@fe9cf000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfe9cf000 0 0x200>; + clocks = <&cpg CPG_MOD 609>; + power-domains = <&sysc R8A7795_PD_A3VP>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x4000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x4000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x4000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + renesas,fcp = <&fcpvd2>; + }; + + fcpvd2: fcp@fea37000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfea37000 0 0x200>; + clocks = <&cpg CPG_MOD 601>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + + vspd3: vsp@fea38000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea38000 0 0x4000>; + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 620>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + + renesas,fcp = <&fcpvd3>; + }; + + fcpvd3: fcp@fea3f000 { + compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + renesas,fcp = <&fcpf0>; + }; + + fdp1@fe944000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe944000 0 0x2400>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 118>; + power-domains = <&sysc R8A7795_PD_A3VP>; + renesas,fcp = <&fcpf1>; + }; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + renesas,fcp = <&fcpf2>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a7795"; + reg = <0 0xfeb00000 0 0x80000>, + <0 0xfeb90000 0 0x14>; + reg-names = "du", "lvds.0"; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&cpg CPG_MOD 727>; + clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_hdmi1: endpoint { + }; + }; + port@3 { + reg = <3>; + du_out_lvds0: endpoint { + }; + }; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index e72be3856d79..13db7d61c26c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -31,11 +31,27 @@ }; }; +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; +}; + &extal_clk { clock-frequency = <16666666>; }; &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 1edf82440d78..9217da983525 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -107,6 +107,123 @@ status = "disabled"; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7796", + "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a7796"; + reg = <0 0xe6060000 0 0x50c>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7796-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 7037a161b6ef..87669f656454 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts new file mode 100644 index 000000000000..5797933ef80e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -0,0 +1,382 @@ +/* + * Copyright (c) 2016 Matthias Brugger <mbrugger@suse.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3368.dtsi" + +/ { + model = "Rockchip Orion R68"; + compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + wakeup-source; + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + red { + gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + label = "orion:red:led"; + pinctrl-names = "default"; + pinctrl-0 = <&led_ctl>; + default-state = "on"; + }; + + blue { + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + label = "orion:blue:led"; + pinctrl-names = "default"; + pinctrl-0 = <&stby_pwren>; + default-state = "off"; + }; + }; + + vcc_18: vcc18-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + /* supplies both host and otg */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 4 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sd: vcc-sd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sd"; + gpio = <&gpio3 11 GPIO_ACTIVE_LOW>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vccio_sd: vcc-io-sd-regulator { + compatible = "regulator-fixed"; + regulator-name= "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vccio_wl: vccio-wl-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_io>; + }; + + vdd_10: vdd-10-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&emmc_pwrseq>; + mmc-hs200-1_2v; + mmc-hs200-1_8v; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 12 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <8000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + /* rtc_int is not connected */ + }; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + emmc { + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 19 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 20 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 21 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 22 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 23 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 24 RK_FUNC_2 &pcfg_pull_up_drv_8ma>, + <1 25 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc-clk { + rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>; + }; + + emmc-cmd { + rockchip,pins = <1 26 RK_FUNC_2 &pcfg_pull_up_drv_8ma>; + }; + + emmc_reset: emmc-reset { + rockchip,pins = <2 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + keys { + pwr_key: pwr-key { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + stby_pwren: stby-pwren { + rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_ctl: led-ctl { + rockchip,pins = <3 29 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <2 9 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <2 11 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <2 5 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 6 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 7 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <2 8 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_18>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + clock-frequency = <50000000>; + clock-freq-min-max = <400000 50000000>; + cap-sd-highspeed; + card-detect-delay = <200>; + keep-power-in-suspend; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 82a32e5591e2..eed1ef6669ff 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -248,7 +248,6 @@ &sdio0 { assigned-clocks = <&cru SCLK_SDIO0>; assigned-clock-parents = <&cru PLL_CPLL>; - broken-cd; bus-width = <4>; cap-sd-highspeed; cap-sdio-irq; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 4f44d1191bfd..0fcb2147c9f9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -45,6 +45,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> #include <dt-bindings/thermal/thermal.h> / { @@ -641,6 +642,15 @@ compatible = "rockchip,rk3368-pmu-io-voltage-domain"; status = "disabled"; }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x200>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + }; }; cru: clock-controller@ff760000 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index d33aa06d46f5..8e82497925fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -49,6 +49,13 @@ compatible = "rockchip,rk3399-evb", "rockchip,rk3399", "google,rk3399evb-rev2"; + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + vdd_center: vdd-center { compatible = "pwm-regulator"; pwms = <&pwm3 0 25000 0>; @@ -69,18 +76,61 @@ regulator-max-microvolt = <3300000>; }; + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + vin-supply = <&vcc5v0_sys>; + }; + vcc_phy: vcc-phy-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_phy"; regulator-always-on; regulator-boot-on; }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + }; &emmc_phy { status = "okay"; }; +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 15 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + &pwm0 { status = "okay"; }; @@ -101,6 +151,36 @@ status = "okay"; }; +&pcie_phy { + status = "disabled"; +}; + +&pcie0 { + ep-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn>; + status = "disabled"; +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + &uart2 { status = "okay"; }; @@ -133,4 +213,11 @@ <1 18 RK_FUNC_GPIO &pcfg_pull_down>; }; }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 25 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index a6dd623a8845..b65c193dc64e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -45,6 +45,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3399-power.h> #include <dt-bindings/thermal/thermal.h> / { @@ -152,6 +153,16 @@ }; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu_a72 { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -159,10 +170,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, - <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; }; xin24m: xin24m { @@ -181,8 +192,8 @@ dmac_bus: dma-controller@ff6d0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6d0000 0x0 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&cru ACLK_DMAC0_PERILP>; clock-names = "apb_pclk"; @@ -191,19 +202,39 @@ dmac_peri: dma-controller@ff6e0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff6e0000 0x0 0x4000>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; clocks = <&cru ACLK_DMAC1_PERILP>; clock-names = "apb_pclk"; }; }; + gmac: ethernet@fe300000 { + compatible = "rockchip,rk3399-gmac"; + reg = <0x0 0xfe300000 0x0 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>, + <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + power-domains = <&power RK3399_PD_GMAC>; + resets = <&cru SRST_A_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + sdio0: dwmmc@fe310000 { compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; @@ -216,7 +247,7 @@ compatible = "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; clock-freq-min-max = <400000 150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; @@ -228,7 +259,7 @@ sdhci: sdhci@fe330000 { compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; reg = <0x0 0xfe330000 0x0 0x10000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; arasan,soc-ctl-syscon = <&grf>; assigned-clocks = <&cru SCLK_EMMC>; assigned-clock-rates = <200000000>; @@ -241,19 +272,60 @@ status = "disabled"; }; + pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + reg = <0x0 0xf8000000 0x0 0x2000000>, + <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + bus-range = <0x0 0x1>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "legacy", "client"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + msi-map = <0x0 &its 0x0 0x1000>; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; clock-names = "hclk_host0", "hclk_host0_arb"; + phys = <&u2phy0_host>; + phy-names = "usb"; status = "disabled"; }; usb_host0_ohci: usb@fe3a0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3a0000 0x0 0x20000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; clock-names = "hclk_host0", "hclk_host0_arb"; status = "disabled"; @@ -262,16 +334,18 @@ usb_host1_ehci: usb@fe3c0000 { compatible = "generic-ehci"; reg = <0x0 0xfe3c0000 0x0 0x20000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; clock-names = "hclk_host1", "hclk_host1_arb"; + phys = <&u2phy1_host>; + phy-names = "usb"; status = "disabled"; }; usb_host1_ohci: usb@fe3e0000 { compatible = "generic-ohci"; reg = <0x0 0xfe3e0000 0x0 0x20000>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; clock-names = "hclk_host1", "hclk_host1_arb"; status = "disabled"; @@ -279,7 +353,7 @@ gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; - #interrupt-cells = <3>; + #interrupt-cells = <4>; #address-cells = <2>; #size-cells = <2>; ranges; @@ -290,12 +364,34 @@ <0x0 0xfff00000 0 0x10000>, /* GICC */ <0x0 0xfff10000 0 0x10000>, /* GICH */ <0x0 0xfff20000 0 0x10000>; /* GICV */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; its: interrupt-controller@fee20000 { compatible = "arm,gic-v3-its"; msi-controller; reg = <0x0 0xfee20000 0x0 0x20000>; }; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu_b0 &cpu_b1>; + }; + }; + }; + + saradc: saradc@ff100000 { + compatible = "rockchip,rk3399-saradc"; + reg = <0x0 0xff100000 0x0 0x100>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_P_SARADC>; + reset-names = "saradc-apb"; + status = "disabled"; }; i2c1: i2c@ff110000 { @@ -305,7 +401,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c1_xfer>; #address-cells = <1>; @@ -320,7 +416,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c2_xfer>; #address-cells = <1>; @@ -335,7 +431,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c3_xfer>; #address-cells = <1>; @@ -350,7 +446,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_xfer>; #address-cells = <1>; @@ -365,7 +461,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_xfer>; #address-cells = <1>; @@ -380,7 +476,7 @@ assigned-clock-rates = <200000000>; clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_xfer>; #address-cells = <1>; @@ -393,7 +489,7 @@ reg = <0x0 0xff180000 0x0 0x100>; clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -406,7 +502,7 @@ reg = <0x0 0xff190000 0x0 0x100>; clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -419,7 +515,7 @@ reg = <0x0 0xff1a0000 0x0 0x100>; clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -432,7 +528,7 @@ reg = <0x0 0xff1b0000 0x0 0x100>; clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -445,7 +541,7 @@ reg = <0x0 0xff1c0000 0x0 0x1000>; clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; #address-cells = <1>; @@ -458,7 +554,7 @@ reg = <0x0 0xff1d0000 0x0 0x1000>; clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; #address-cells = <1>; @@ -471,7 +567,7 @@ reg = <0x0 0xff1e0000 0x0 0x1000>; clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; #address-cells = <1>; @@ -484,7 +580,7 @@ reg = <0x0 0xff1f0000 0x0 0x1000>; clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; #address-cells = <1>; @@ -497,7 +593,7 @@ reg = <0x0 0xff200000 0x0 0x1000>; clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; #address-cells = <1>; @@ -577,7 +673,7 @@ tsadc: tsadc@ff260000 { compatible = "rockchip,rk3399-tsadc"; reg = <0x0 0xff260000 0x0 0x100>; - interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; assigned-clocks = <&cru SCLK_TSADC>; assigned-clock-rates = <750000>; clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; @@ -594,6 +690,203 @@ status = "disabled"; }; + qos_gmac: qos@ffa5c000 { + compatible = "syscon"; + reg = <0x0 0xffa5c000 0x0 0x20>; + }; + + qos_hdcp: qos@ffa90000 { + compatible = "syscon"; + reg = <0x0 0xffa90000 0x0 0x20>; + }; + + qos_iep: qos@ffa98000 { + compatible = "syscon"; + reg = <0x0 0xffa98000 0x0 0x20>; + }; + + qos_isp0_m0: qos@ffaa0000 { + compatible = "syscon"; + reg = <0x0 0xffaa0000 0x0 0x20>; + }; + + qos_isp0_m1: qos@ffaa0080 { + compatible = "syscon"; + reg = <0x0 0xffaa0080 0x0 0x20>; + }; + + qos_isp1_m0: qos@ffaa8000 { + compatible = "syscon"; + reg = <0x0 0xffaa8000 0x0 0x20>; + }; + + qos_isp1_m1: qos@ffaa8080 { + compatible = "syscon"; + reg = <0x0 0xffaa8080 0x0 0x20>; + }; + + qos_rga_r: qos@ffab0000 { + compatible = "syscon"; + reg = <0x0 0xffab0000 0x0 0x20>; + }; + + qos_rga_w: qos@ffab0080 { + compatible = "syscon"; + reg = <0x0 0xffab0080 0x0 0x20>; + }; + + qos_video_m0: qos@ffab8000 { + compatible = "syscon"; + reg = <0x0 0xffab8000 0x0 0x20>; + }; + + qos_video_m1_r: qos@ffac0000 { + compatible = "syscon"; + reg = <0x0 0xffac0000 0x0 0x20>; + }; + + qos_video_m1_w: qos@ffac0080 { + compatible = "syscon"; + reg = <0x0 0xffac0080 0x0 0x20>; + }; + + qos_vop_big_r: qos@ffac8000 { + compatible = "syscon"; + reg = <0x0 0xffac8000 0x0 0x20>; + }; + + qos_vop_big_w: qos@ffac8080 { + compatible = "syscon"; + reg = <0x0 0xffac8080 0x0 0x20>; + }; + + qos_vop_little: qos@ffad0000 { + compatible = "syscon"; + reg = <0x0 0xffad0000 0x0 0x20>; + }; + + qos_gpu: qos@ffae0000 { + compatible = "syscon"; + reg = <0x0 0xffae0000 0x0 0x20>; + }; + + pmu: power-management@ff310000 { + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; + reg = <0x0 0xff310000 0x0 0x1000>; + + /* + * Note: RK3399 supports 6 voltage domains including VD_CORE_L, + * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. + * Some of the power domains are grouped together for every + * voltage domain. + * The detail contents as below. + */ + power: power-controller { + compatible = "rockchip,rk3399-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* These power domains are grouped by VD_CENTER */ + pd_iep@RK3399_PD_IEP { + reg = <RK3399_PD_IEP>; + clocks = <&cru ACLK_IEP>, + <&cru HCLK_IEP>; + pm_qos = <&qos_iep>; + }; + pd_rga@RK3399_PD_RGA { + reg = <RK3399_PD_RGA>; + clocks = <&cru ACLK_RGA>, + <&cru HCLK_RGA>; + pm_qos = <&qos_rga_r>, + <&qos_rga_w>; + }; + pd_vcodec@RK3399_PD_VCODEC { + reg = <RK3399_PD_VCODEC>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + pm_qos = <&qos_video_m0>; + }; + pd_vdu@RK3399_PD_VDU { + reg = <RK3399_PD_VDU>; + clocks = <&cru ACLK_VDU>, + <&cru HCLK_VDU>; + pm_qos = <&qos_video_m1_r>, + <&qos_video_m1_w>; + }; + + /* These power domains are grouped by VD_GPU */ + pd_gpu@RK3399_PD_GPU { + reg = <RK3399_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + }; + + /* These power domains are grouped by VD_LOGIC */ + pd_gmac@RK3399_PD_GMAC { + reg = <RK3399_PD_GMAC>; + clocks = <&cru ACLK_GMAC>; + pm_qos = <&qos_gmac>; + }; + pd_vio@RK3399_PD_VIO { + reg = <RK3399_PD_VIO>; + #address-cells = <1>; + #size-cells = <0>; + + pd_hdcp@RK3399_PD_HDCP { + reg = <RK3399_PD_HDCP>; + clocks = <&cru ACLK_HDCP>, + <&cru HCLK_HDCP>, + <&cru PCLK_HDCP>; + pm_qos = <&qos_hdcp>; + }; + pd_isp0@RK3399_PD_ISP0 { + reg = <RK3399_PD_ISP0>; + clocks = <&cru ACLK_ISP0>, + <&cru HCLK_ISP0>; + pm_qos = <&qos_isp0_m0>, + <&qos_isp0_m1>; + }; + pd_isp1@RK3399_PD_ISP1 { + reg = <RK3399_PD_ISP1>; + clocks = <&cru ACLK_ISP1>, + <&cru HCLK_ISP1>; + pm_qos = <&qos_isp1_m0>, + <&qos_isp1_m1>; + }; + pd_tcpc0@RK3399_PD_TCPC0 { + reg = <RK3399_PD_TCPD0>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + }; + pd_tcpc1@RK3399_PD_TCPC1 { + reg = <RK3399_PD_TCPD1>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + }; + pd_vo@RK3399_PD_VO { + reg = <RK3399_PD_VO>; + #address-cells = <1>; + #size-cells = <0>; + + pd_vopb@RK3399_PD_VOPB { + reg = <RK3399_PD_VOPB>; + clocks = <&cru ACLK_VOP0>, + <&cru HCLK_VOP0>; + pm_qos = <&qos_vop_big_r>, + <&qos_vop_big_w>; + }; + pd_vopl@RK3399_PD_VOPL { + reg = <RK3399_PD_VOPL>; + clocks = <&cru ACLK_VOP1>, + <&cru HCLK_VOP1>; + pm_qos = <&qos_vop_little>; + }; + }; + }; + }; + }; + pmugrf: syscon@ff320000 { compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd"; reg = <0x0 0xff320000 0x0 0x1000>; @@ -611,7 +904,7 @@ reg = <0x0 0xff350000 0x0 0x1000>; clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; clock-names = "spiclk", "apb_pclk"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; #address-cells = <1>; @@ -624,7 +917,7 @@ reg = <0x0 0xff370000 0x0 0x100>; clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; clock-names = "baudclk", "apb_pclk"; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>; reg-shift = <2>; reg-io-width = <4>; pinctrl-names = "default"; @@ -639,7 +932,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_xfer>; #address-cells = <1>; @@ -654,7 +947,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_xfer>; #address-cells = <1>; @@ -669,7 +962,7 @@ assigned-clock-rates = <200000000>; clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; clock-names = "i2c", "pclk"; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_xfer>; #address-cells = <1>; @@ -721,6 +1014,35 @@ status = "disabled"; }; + efuse0: efuse@ff690000 { + compatible = "rockchip,rk3399-efuse"; + reg = <0x0 0xff690000 0x0 0x80>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&cru PCLK_EFUSE1024NS>; + clock-names = "pclk_efuse"; + + /* Data cells */ + cpub_leakage: cpu-leakage@17 { + reg = <0x17 0x1>; + }; + gpu_leakage: gpu-leakage@18 { + reg = <0x18 0x1>; + }; + center_leakage: center-leakage@19 { + reg = <0x19 0x1>; + }; + cpul_leakage: cpu-leakage@1a { + reg = <0x1a 0x1>; + }; + logic_leakage: logic-leakage@1b { + reg = <0x1b 0x1>; + }; + wafer_info: wafer-info@1c { + reg = <0x1c 0x1>; + }; + }; + pmucru: pmu-clock-controller@ff750000 { compatible = "rockchip,rk3399-pmucru"; reg = <0x0 0xff750000 0x0 0x1000>; @@ -741,7 +1063,7 @@ <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, <&cru PCLK_PERIHP>, <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, - <&cru PCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; assigned-clock-rates = <594000000>, <800000000>, @@ -749,7 +1071,7 @@ <150000000>, <75000000>, <37500000>, <100000000>, <100000000>, - <50000000>, + <50000000>, <600000000>, <100000000>, <50000000>; }; @@ -764,6 +1086,40 @@ status = "disabled"; }; + u2phy0: usb2-phy@e450 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe450 0x10>; + clocks = <&cru SCLK_USB2PHY0_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy0_480m"; + status = "disabled"; + + u2phy0_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + + u2phy1: usb2-phy@e460 { + compatible = "rockchip,rk3399-usb2phy"; + reg = <0xe460 0x10>; + clocks = <&cru SCLK_USB2PHY1_REF>; + clock-names = "phyclk"; + #clock-cells = <0>; + clock-output-names = "clk_usbphy1_480m"; + status = "disabled"; + + u2phy1_host: host-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "linestate"; + status = "disabled"; + }; + }; + emmc_phy: phy@f780 { compatible = "rockchip,rk3399-emmc-phy"; reg = <0xf780 0x24>; @@ -772,19 +1128,85 @@ #phy-cells = <0>; status = "disabled"; }; + + pcie_phy: pcie-phy { + compatible = "rockchip,rk3399-pcie-phy"; + clocks = <&cru SCLK_PCIEPHY_REF>; + clock-names = "refclk"; + #phy-cells = <0>; + resets = <&cru SRST_PCIEPHY>; + reset-names = "phy"; + status = "disabled"; + }; }; - watchdog@ff840000 { + tcphy0: phy@ff7c0000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff7c0000 0x0 0x40000>; + clocks = <&cru SCLK_UPHY0_TCPDCORE>, + <&cru SCLK_UPHY0_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY0>, + <&cru SRST_UPHY0_PIPE_L00>, + <&cru SRST_P_UPHY0_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,grf = <&grf>; + rockchip,typec-conn-dir = <0xe580 0 16>; + rockchip,usb3tousb2-en = <0xe580 3 19>; + rockchip,external-psm = <0xe588 14 30>; + rockchip,pipe-status = <0xe5c0 0 0>; + status = "disabled"; + + tcphy0_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy0_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + tcphy1: phy@ff800000 { + compatible = "rockchip,rk3399-typec-phy"; + reg = <0x0 0xff800000 0x0 0x40000>; + clocks = <&cru SCLK_UPHY1_TCPDCORE>, + <&cru SCLK_UPHY1_TCPDPHY_REF>; + clock-names = "tcpdcore", "tcpdphy-ref"; + assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; + assigned-clock-rates = <50000000>; + resets = <&cru SRST_UPHY1>, + <&cru SRST_UPHY1_PIPE_L00>, + <&cru SRST_P_UPHY1_TCPHY>; + reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; + rockchip,grf = <&grf>; + rockchip,typec-conn-dir = <0xe58c 0 16>; + rockchip,usb3tousb2-en = <0xe58c 3 19>; + rockchip,external-psm = <0xe594 14 30>; + rockchip,pipe-status = <0xe5c0 16 16>; + status = "disabled"; + + tcphy1_dp: dp-port { + #phy-cells = <0>; + }; + + tcphy1_usb3: usb3-port { + #phy-cells = <0>; + }; + }; + + watchdog@ff848000 { compatible = "snps,dw-wdt"; - reg = <0x0 0xff840000 0x0 0x100>; + reg = <0x0 0xff848000 0x0 0x100>; clocks = <&cru PCLK_WDT>; - interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; }; rktimer: rktimer@ff850000 { compatible = "rockchip,rk3399-timer"; reg = <0x0 0xff850000 0x0 0x1000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; clock-names = "pclk", "timer"; }; @@ -792,7 +1214,7 @@ spdif: spdif@ff870000 { compatible = "rockchip,rk3399-spdif"; reg = <0x0 0xff870000 0x0 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 7>; dma-names = "tx"; clock-names = "mclk", "hclk"; @@ -806,7 +1228,7 @@ compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff880000 0x0 0x1000>; rockchip,grf = <&grf>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 0>, <&dmac_bus 1>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -819,7 +1241,7 @@ i2s1: i2s@ff890000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff890000 0x0 0x1000>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 2>, <&dmac_bus 3>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -832,7 +1254,7 @@ i2s2: i2s@ff8a0000 { compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; reg = <0x0 0xff8a0000 0x0 0x1000>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dmac_bus 4>, <&dmac_bus 5>; dma-names = "tx", "rx"; clock-names = "i2s_clk", "i2s_hclk"; @@ -852,7 +1274,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff720000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO0_PMU>; - interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -865,7 +1287,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff730000 0x0 0x100>; clocks = <&pmucru PCLK_GPIO1_PMU>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -878,7 +1300,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff780000 0x0 0x100>; clocks = <&cru PCLK_GPIO2>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -891,7 +1313,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff788000 0x0 0x100>; clocks = <&cru PCLK_GPIO3>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -904,7 +1326,7 @@ compatible = "rockchip,gpio-bank"; reg = <0x0 0xff790000 0x0 0x100>; clocks = <&cru PCLK_GPIO4>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; gpio-controller; #gpio-cells = <0x2>; @@ -955,6 +1377,72 @@ drive-strength = <13>; }; + clock { + clk_32k: clk-32k { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = + /* mac_txclk */ + <3 17 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_rxclk */ + <3 14 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdio */ + <3 13 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txen */ + <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 11 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 9 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdc */ + <3 8 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 7 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 6 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_rxd3 */ + <3 3 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd2 */ + <3 2 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd3 */ + <3 1 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd2 */ + <3 0 RK_FUNC_1 &pcfg_pull_none_13ma>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = + /* mac_mdio */ + <3 13 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txen */ + <3 12 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_clk */ + <3 11 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxer */ + <3 10 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxdv */ + <3 9 RK_FUNC_1 &pcfg_pull_none>, + /* mac_mdc */ + <3 8 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd1 */ + <3 7 RK_FUNC_1 &pcfg_pull_none>, + /* mac_rxd0 */ + <3 6 RK_FUNC_1 &pcfg_pull_none>, + /* mac_txd1 */ + <3 5 RK_FUNC_1 &pcfg_pull_none_13ma>, + /* mac_txd0 */ + <3 4 RK_FUNC_1 &pcfg_pull_none_13ma>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = @@ -1326,5 +1814,18 @@ <1 14 RK_FUNC_1 &pcfg_pull_none>; }; }; + + pcie { + pcie_clkreqn: pci-clkreqn { + rockchip,pins = + <2 26 RK_FUNC_2 &pcfg_pull_none>; + }; + + pcie_clkreqnb: pci-clkreqnb { + rockchip,pins = + <4 24 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/socionext/Makefile b/arch/arm64/boot/dts/socionext/Makefile index 299b67ec4d44..5538598b302c 100644 --- a/arch/arm64/boot/dts/socionext/Makefile +++ b/arch/arm64/boot/dts/socionext/Makefile @@ -1,4 +1,6 @@ -dtb-$(CONFIG_ARCH_UNIPHIER) += uniphier-ph1-ld20-ref.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ld11-ref.dtb \ + uniphier-ld20-ref.dtb always := $(dtb-y) clean-files := *.dtb diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts new file mode 100644 index 000000000000..7168cf818ad8 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -0,0 +1,100 @@ +/* + * Device Tree Source for UniPhier LD11 Reference Board + * + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ld11.dtsi" +/include/ "uniphier-ref-daughter.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier LD11 Reference Board"; + compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11"; + + memory { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + }; +}; + +ðsc { + interrupts = <0 48 4>; +}; + +&serial0 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi new file mode 100644 index 000000000000..3eb4c42ce7b9 --- /dev/null +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -0,0 +1,338 @@ +/* + * Device Tree Source for UniPhier LD11 SoC + * + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ + +/ { + compatible = "socionext,uniphier-ld11"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0 0x80000000>; + }; + }; + + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 4>, + <1 14 4>, + <1 11 4>, + <1 10 4>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; + + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; + + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; + + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; + + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; + + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; + + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + clocks = <&peri_clk 6>; + clock-frequency = <400000>; + }; + + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; + + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clocks = <&peri_clk 8>; + clock-frequency = <100000>; + }; + + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; + + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-ld11-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-ld11-peri-reset"; + #reset-cells = <1>; + }; + }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 243 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 244 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 245 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; + }; + + mioctrl@5b3e0000 { + compatible = "socionext,uniphier-mioctrl", + "simple-mfd", "syscon"; + reg = <0x5b3e0000 0x800>; + + mio_clk: clock { + compatible = "socionext,uniphier-ld11-mio-clock"; + #clock-cells = <1>; + }; + + mio_rst: reset { + compatible = "socionext,uniphier-ld11-mio-reset"; + #reset-cells = <1>; + resets = <&sys_rst 7>; + }; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-ld11-pinctrl"; + }; + }; + + gic: interrupt-controller@5fe00000 { + compatible = "arm,gic-v3"; + reg = <0x5fe00000 0x10000>, /* GICD */ + <0x5fe40000 0x80000>; /* GICR */ + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 4>; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld11-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + sys_clk: clock { + compatible = "socionext,uniphier-ld11-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-ld11-reset"; + #reset-cells = <1>; + }; + }; + }; +}; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 2adad8c8cd27..609162a1a322 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD20 Reference Board + * Device Tree Source for UniPhier LD20 Reference Board * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -43,13 +44,13 @@ */ /dts-v1/; -/include/ "uniphier-ph1-ld20.dtsi" +/include/ "uniphier-ld20.dtsi" /include/ "uniphier-ref-daughter.dtsi" /include/ "uniphier-support-card.dtsi" / { - model = "UniPhier PH1-LD20 Reference Board"; - compatible = "socionext,ph1-ld20-ref", "socionext,ph1-ld20"; + model = "UniPhier LD20 Reference Board"; + compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; memory { device_type = "memory"; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index d73bdc8c9115..08fd7cf7769c 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -1,7 +1,8 @@ /* - * Device Tree Source for UniPhier PH1-LD20 SoC + * Device Tree Source for UniPhier LD20 SoC * - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015-2016 Socionext Inc. + * Author: Masahiro Yamada <yamada.masahiro@socionext.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -45,7 +46,7 @@ /memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ / { - compatible = "socionext,ph1-ld20"; + compatible = "socionext,uniphier-ld20"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&gic>; @@ -113,18 +114,6 @@ #clock-cells = <0>; clock-frequency = <25000000>; }; - - uart_clk: uart_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <58820000>; - }; - - i2c_clk: i2c_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <50000000>; - }; }; timer { @@ -148,7 +137,7 @@ interrupts = <0 33 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; - clocks = <&uart_clk>; + clocks = <&peri_clk 0>; }; serial1: serial@54006900 { @@ -158,7 +147,7 @@ interrupts = <0 35 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - clocks = <&uart_clk>; + clocks = <&peri_clk 1>; }; serial2: serial@54006a00 { @@ -168,7 +157,7 @@ interrupts = <0 37 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - clocks = <&uart_clk>; + clocks = <&peri_clk 2>; }; serial3: serial@54006b00 { @@ -178,7 +167,7 @@ interrupts = <0 177 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - clocks = <&uart_clk>; + clocks = <&peri_clk 3>; }; i2c0: i2c@58780000 { @@ -190,7 +179,7 @@ interrupts = <0 41 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 4>; clock-frequency = <100000>; }; @@ -203,7 +192,7 @@ interrupts = <0 42 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 5>; clock-frequency = <100000>; }; @@ -213,7 +202,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 43 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 6>; clock-frequency = <400000>; }; @@ -226,7 +215,7 @@ interrupts = <0 44 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 7>; clock-frequency = <100000>; }; @@ -239,7 +228,7 @@ interrupts = <0 45 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 8>; clock-frequency = <100000>; }; @@ -249,7 +238,7 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <0 25 4>; - clocks = <&i2c_clk>; + clocks = <&peri_clk 9>; clock-frequency = <400000>; }; @@ -259,6 +248,8 @@ reg = <0x58c00000 0x400>; #address-cells = <2>; #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; }; smpctrl@59800000 { @@ -266,12 +257,45 @@ reg = <0x59801000 0x400>; }; + mioctrl@59810000 { + compatible = "socionext,uniphier-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + mio_clk: clock { + compatible = "socionext,uniphier-ld20-mio-clock"; + #clock-cells = <1>; + }; + + mio_rst: reset { + compatible = "socionext,uniphier-ld20-mio-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-ld20-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-ld20-peri-reset"; + #reset-cells = <1>; + }; + }; + soc-glue@5f800000 { - compatible = "simple-mfd", "syscon"; + compatible = "socionext,uniphier-soc-glue", + "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; pinctrl: pinctrl { - compatible = "socionext,uniphier-ld20-pinctrl"; + compatible = "socionext,uniphier-ld20-pinctrl"; }; }; @@ -283,6 +307,22 @@ #interrupt-cells = <3>; interrupts = <1 9 4>; }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x4000>; + + sys_clk: clock { + compatible = "socionext,uniphier-ld20-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-ld20-reset"; + #reset-cells = <1>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index acb0527fdc4a..358089687a69 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -29,7 +29,7 @@ memory { device_type = "memory"; - reg = <0x0 0x0 0x40000000>; + reg = <0x0 0x0 0x0 0x40000000>; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 3e2e51fbd2bc..68a908334c7b 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -14,7 +14,7 @@ / { compatible = "xlnx,zynqmp"; #address-cells = <2>; - #size-cells = <1>; + #size-cells = <2>; cpus { #address-cells = <1>; @@ -51,6 +51,7 @@ pmu { compatible = "arm,armv8-pmuv3"; + interrupt-parent = <&gic>; interrupts = <0 143 4>, <0 144 4>, <0 145 4>, @@ -75,15 +76,15 @@ compatible = "simple-bus"; #address-cells = <2>; #size-cells = <1>; - ranges; + ranges = <0 0 0 0 0xffffffff>; gic: interrupt-controller@f9010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; #interrupt-cells = <3>; reg = <0x0 0xf9010000 0x10000>, - <0x0 0xf902f000 0x2000>, + <0x0 0xf9020000 0x20000>, <0x0 0xf9040000 0x20000>, - <0x0 0xf906f000 0x2000>; + <0x0 0xf9060000 0x20000>; interrupt-controller; interrupt-parent = <&gic>; interrupts = <1 9 0xf04>; @@ -93,14 +94,14 @@ amba: amba { compatible = "simple-bus"; #address-cells = <2>; - #size-cells = <1>; + #size-cells = <2>; ranges; can0: can@ff060000 { compatible = "xlnx,zynq-can-1.0"; status = "disabled"; clock-names = "can_clk", "pclk"; - reg = <0x0 0xff060000 0x1000>; + reg = <0x0 0xff060000 0x0 0x1000>; interrupts = <0 23 4>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; @@ -111,7 +112,7 @@ compatible = "xlnx,zynq-can-1.0"; status = "disabled"; clock-names = "can_clk", "pclk"; - reg = <0x0 0xff070000 0x1000>; + reg = <0x0 0xff070000 0x0 0x1000>; interrupts = <0 24 4>; interrupt-parent = <&gic>; tx-fifo-depth = <0x40>; @@ -123,7 +124,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; - reg = <0x0 0xff0b0000 0x1000>; + reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; @@ -134,7 +135,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; - reg = <0x0 0xff0c0000 0x1000>; + reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; @@ -145,7 +146,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; - reg = <0x0 0xff0d0000 0x1000>; + reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; @@ -156,7 +157,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; - reg = <0x0 0xff0e0000 0x1000>; + reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk"; #address-cells = <1>; #size-cells = <0>; @@ -170,7 +171,7 @@ interrupts = <0 16 4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0x0 0xff0a0000 0x1000>; + reg = <0x0 0xff0a0000 0x0 0x1000>; }; i2c0: i2c@ff020000 { @@ -178,7 +179,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 17 4>; - reg = <0x0 0xff020000 0x1000>; + reg = <0x0 0xff020000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; }; @@ -188,15 +189,54 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 18 4>; - reg = <0x0 0xff030000 0x1000>; + reg = <0x0 0xff030000 0x0 0x1000>; #address-cells = <1>; #size-cells = <0>; }; + pcie: pcie@fd0e0000 { + compatible = "xlnx,nwl-pcie-2.11"; + status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + msi-controller; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = <0 118 4>, + <0 117 4>, + <0 116 4>, + <0 115 4>, /* MSI_1 [63...32] */ + <0 114 4>; /* MSI_0 [31...0] */ + interrupt-names = "misc", "dummy", "intx", + "msi1", "msi0"; + msi-parent = <&pcie>; + reg = <0x0 0xfd0e0000 0x0 0x1000>, + <0x0 0xfd480000 0x0 0x1000>, + <0x80 0x00000000 0x0 0x1000000>; + reg-names = "breg", "pcireg", "cfg"; + ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 + 0xe0000000 0x00000000 0x10000000 + /* non-prefetchable memory */ + 0x43000000 0x00000006 0x00000000 0x00000006 + 0x00000000 0x00000002 0x00000000>; + /* prefetchable memory */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc 0x4>; + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + sata: ahci@fd0c0000 { compatible = "ceva,ahci-1v84"; status = "disabled"; - reg = <0x0 0xfd0c0000 0x2000>; + reg = <0x0 0xfd0c0000 0x0 0x2000>; interrupt-parent = <&gic>; interrupts = <0 133 4>; }; @@ -206,7 +246,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 48 4>; - reg = <0x0 0xff160000 0x1000>; + reg = <0x0 0xff160000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; }; @@ -215,13 +255,13 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 49 4>; - reg = <0x0 0xff170000 0x1000>; + reg = <0x0 0xff170000 0x0 0x1000>; clock-names = "clk_xin", "clk_ahb"; }; smmu: smmu@fd800000 { compatible = "arm,mmu-500"; - reg = <0x0 0xfd800000 0x20000>; + reg = <0x0 0xfd800000 0x0 0x20000>; #global-interrupts = <1>; interrupt-parent = <&gic>; interrupts = <0 157 4>, @@ -236,7 +276,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 19 4>; - reg = <0x0 0xff040000 0x1000>; + reg = <0x0 0xff040000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; @@ -247,7 +287,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 20 4>; - reg = <0x0 0xff050000 0x1000>; + reg = <0x0 0xff050000 0x0 0x1000>; clock-names = "ref_clk", "pclk"; #address-cells = <1>; #size-cells = <0>; @@ -258,7 +298,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 36 4>, <0 37 4>, <0 38 4>; - reg = <0x0 0xff110000 0x1000>; + reg = <0x0 0xff110000 0x0 0x1000>; timer-width = <32>; }; @@ -267,7 +307,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 39 4>, <0 40 4>, <0 41 4>; - reg = <0x0 0xff120000 0x1000>; + reg = <0x0 0xff120000 0x0 0x1000>; timer-width = <32>; }; @@ -276,7 +316,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 42 4>, <0 43 4>, <0 44 4>; - reg = <0x0 0xff130000 0x1000>; + reg = <0x0 0xff130000 0x0 0x1000>; timer-width = <32>; }; @@ -285,7 +325,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 45 4>, <0 46 4>, <0 47 4>; - reg = <0x0 0xff140000 0x1000>; + reg = <0x0 0xff140000 0x0 0x1000>; timer-width = <32>; }; @@ -294,7 +334,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 21 4>; - reg = <0x0 0xff000000 0x1000>; + reg = <0x0 0xff000000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; }; @@ -303,7 +343,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 22 4>; - reg = <0x0 0xff010000 0x1000>; + reg = <0x0 0xff010000 0x0 0x1000>; clock-names = "uart_clk", "pclk"; }; @@ -312,7 +352,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 65 4>; - reg = <0x0 0xfe200000 0x40000>; + reg = <0x0 0xfe200000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; }; @@ -321,7 +361,7 @@ status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 70 4>; - reg = <0x0 0xfe300000 0x40000>; + reg = <0x0 0xfe300000 0x0 0x40000>; clock-names = "clk_xin", "clk_ahb"; }; @@ -329,8 +369,8 @@ compatible = "cdns,wdt-r1p2"; status = "disabled"; interrupt-parent = <&gic>; - interrupts = <0 52 1>; - reg = <0x0 0xfd4d0000 0x1000>; + interrupts = <0 113 1>; + reg = <0x0 0xfd4d0000 0x0 0x1000>; timeout-sec = <10>; }; }; diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile new file mode 100644 index 000000000000..667806620f59 --- /dev/null +++ b/arch/arm64/boot/dts/zte/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts new file mode 100644 index 000000000000..e164ff6de5fc --- /dev/null +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2016 ZTE Corporation. + * Copyright 2016 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "zx296718.dtsi" + +/ { + model = "ZTE zx296718 evaluation board"; + compatible = "zte,zx296718-evb", "zte,zx296718"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi new file mode 100644 index 000000000000..a223066f24ce --- /dev/null +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -0,0 +1,292 @@ +/* + * Copyright 2016 ZTE Corporation. + * Copyright 2016 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "zte,zx296718"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + clk24k: clk-24k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000>; + clock-output-names = "rtcclk"; + }; + + osc32k: clk-osc32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "osc32k"; + }; + + osc12m: clk-osc12m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + clock-output-names = "osc12m"; + }; + + osc24m: clk-osc24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc24m"; + }; + + osc25m: clk-osc25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "osc25m"; + }; + + osc60m: clk-osc60m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <60000000>; + clock-output-names = "osc60m"; + }; + + osc99m: clk-osc99m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <99000000>; + clock-output-names = "osc99m"; + }; + + osc125m: clk-osc125m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "osc125m"; + }; + + osc198m: clk-osc198m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <198000000>; + clock-output-names = "osc198m"; + }; + + pll_audio: clk-pll-884m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <884000000>; + clock-output-names = "pll_audio"; + }; + + pll_ddr: clk-pll-932m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <932000000>; + clock-output-names = "pll_ddr"; + }; + + pll_hsic: clk-pll-960m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <960000000>; + clock-output-names = "pll_hsic"; + }; + + pll_mac: clk-pll-1000m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-output-names = "pll_mac"; + }; + + pll_vga: clk-pll-1073m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1073000000>; + clock-output-names = "pll_vga"; + }; + + pll_mm0: clk-pll-1188m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1188000000>; + clock-output-names = "pll_mm0"; + }; + + pll_mm1: clk-pll-1296m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1296000000>; + clock-output-names = "pll_mm1"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@2a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + #redistributor-regions = <6>; + redistributor-stride = <0x0 0x40000>; + interrupt-controller; + reg = <0x02a00000 0x10000>, + <0x02b00000 0x20000>, + <0x02b20000 0x20000>, + <0x02b40000 0x20000>, + <0x02b60000 0x20000>, + <0x02b80000 0x20000>, + <0x02ba0000 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aon_sysctrl: aon-sysctrl@116000 { + compatible = "zte,zx296718-aon-sysctrl", "syscon"; + reg = <0x116000 0x1000>; + }; + + uart0: uart@11f000 { + compatible = "arm,pl011", "arm,primecell"; + arm,primecell-periphid = <0x001feffe>; + reg = <0x11f000 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dma: dma-controller@1460000 { + compatible = "zte,zx296702-dma"; + reg = <0x01460000 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + clock-names = "dmaclk"; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <32>; + }; + + sysctrl: sysctrl@1463000 { + compatible = "zte,zx296718-sysctrl", "syscon"; + reg = <0x1463000 0x1000>; + }; + }; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index eadf4855ad2d..dab2cb0c1f1c 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -57,10 +57,12 @@ CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VULCAN=y CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_IOV=y +CONFIG_PCI_AARDVARK=y CONFIG_PCIE_RCAR=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y @@ -82,6 +84,7 @@ CONFIG_COMPAT=y CONFIG_CPU_IDLE=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_DT=y CONFIG_ARM_BIG_LITTLE_CPUFREQ=y CONFIG_ARM_SCPI_CPUFREQ=y CONFIG_NET=y @@ -120,6 +123,14 @@ CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y CONFIG_BPF_JIT=y +CONFIG_BT=m +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_DEBUGFS is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_LL=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_LEDS=y @@ -139,7 +150,8 @@ CONFIG_VIRTIO_BLK=y CONFIG_SRAM=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y -# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_HISI_SAS=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y @@ -160,6 +172,8 @@ CONFIG_VIRTIO_NET=y CONFIG_AMD_XGBE=y CONFIG_NET_XGENE=y CONFIG_MACB=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y @@ -186,6 +200,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MISC=y CONFIG_INPUT_PM8941_PWRKEY=y +CONFIG_INPUT_HISI_POWERKEY=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -211,12 +226,12 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_MVEBU_UART=y CONFIG_VIRTIO_CONSOLE=y -# CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_QUP=y CONFIG_I2C_TEGRA=y @@ -224,6 +239,7 @@ CONFIG_I2C_UNIPHIER_F=y CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y +CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_QUP=y @@ -234,6 +250,7 @@ CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y @@ -252,10 +269,14 @@ CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_ARM_SCPI=y CONFIG_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y CONFIG_EXYNOS_THERMAL=y CONFIG_WATCHDOG=y CONFIG_RENESAS_WDT=y CONFIG_S3C2410_WATCHDOG=y +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m CONFIG_MFD_MAX77620=y CONFIG_MFD_SPMI_PMIC=y CONFIG_MFD_SEC_CORE=y @@ -264,6 +285,7 @@ CONFIG_REGULATOR=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_PWM=y @@ -274,6 +296,8 @@ CONFIG_DRM=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_TEGRA=m CONFIG_DRM_PANEL_SIMPLE=m +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_HISI_KIRIN=m CONFIG_FB=y CONFIG_FB_ARMCLCD=y CONFIG_BACKLIGHT_GENERIC=m @@ -291,6 +315,7 @@ CONFIG_SND_SOC_AK4613=y CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_XHCI_RCAR=y CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_XHCI_TEGRA=y @@ -300,6 +325,7 @@ CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y CONFIG_USB_DWC2=y CONFIG_USB_DWC3=y @@ -311,15 +337,18 @@ CONFIG_USB_HSIC_USB3503=y CONFIG_USB_MSM_OTG=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ACPI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y +CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_K3=y @@ -345,6 +374,8 @@ CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y CONFIG_TEGRA20_APB_DMA=y CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y CONFIG_RCAR_DMAC=y CONFIG_VFIO=y CONFIG_VFIO_PCI=y diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c index 5c888049d061..6b2aa0fd6cd0 100644 --- a/arch/arm64/crypto/aes-glue.c +++ b/arch/arm64/crypto/aes-glue.c @@ -216,7 +216,7 @@ static int ctr_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE); } - if (nbytes) { + if (walk.nbytes % AES_BLOCK_SIZE) { u8 *tdst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE; u8 *tsrc = walk.src.virt.addr + blocks * AES_BLOCK_SIZE; u8 __aligned(8) tail[AES_BLOCK_SIZE]; diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild index f43d2c44c765..44e1d7f10add 100644 --- a/arch/arm64/include/asm/Kbuild +++ b/arch/arm64/include/asm/Kbuild @@ -1,4 +1,3 @@ -generic-y += bug.h generic-y += bugs.h generic-y += clkdev.h generic-y += cputime.h @@ -10,7 +9,6 @@ generic-y += dma-contiguous.h generic-y += early_ioremap.h generic-y += emergency-restart.h generic-y += errno.h -generic-y += ftrace.h generic-y += hw_irq.h generic-y += ioctl.h generic-y += ioctls.h @@ -27,12 +25,10 @@ generic-y += mman.h generic-y += msgbuf.h generic-y += msi.h generic-y += mutex.h -generic-y += pci.h generic-y += poll.h generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h -generic-y += sections.h generic-y += segment.h generic-y += sembuf.h generic-y += serial.h @@ -45,7 +41,6 @@ generic-y += swab.h generic-y += switch_to.h generic-y += termbits.h generic-y += termios.h -generic-y += topology.h generic-y += trace_clock.h generic-y += types.h generic-y += unaligned.h diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h index 5420cb0fcb3e..e517088d635f 100644 --- a/arch/arm64/include/asm/acpi.h +++ b/arch/arm64/include/asm/acpi.h @@ -12,7 +12,7 @@ #ifndef _ASM_ACPI_H #define _ASM_ACPI_H -#include <linux/mm.h> +#include <linux/memblock.h> #include <linux/psci.h> #include <asm/cputype.h> @@ -32,7 +32,11 @@ static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size) { - if (!page_is_ram(phys >> PAGE_SHIFT)) + /* + * EFI's reserve_regions() call adds memory with the WB attribute + * to memblock via early_init_dt_add_memory_arch(). + */ + if (!memblock_is_memory(phys)) return ioremap(phys, size); return ioremap_cache(phys, size); diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 8746ff6abd77..55101bd86b98 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -2,6 +2,7 @@ #define __ASM_ALTERNATIVE_H #include <asm/cpufeature.h> +#include <asm/insn.h> #ifndef __ASSEMBLY__ @@ -90,34 +91,55 @@ void apply_alternatives(void *start, size_t length); .endm /* - * Begin an alternative code sequence. + * Alternative sequences + * + * The code for the case where the capability is not present will be + * assembled and linked as normal. There are no restrictions on this + * code. + * + * The code for the case where the capability is present will be + * assembled into a special section to be used for dynamic patching. + * Code for that case must: + * + * 1. Be exactly the same length (in bytes) as the default code + * sequence. * - * The code that follows this macro will be assembled and linked as - * normal. There are no restrictions on this code. + * 2. Not contain a branch target that is used outside of the + * alternative sequence it is defined in (branches into an + * alternative sequence are not fixed up). + */ + +/* + * Begin an alternative code sequence. */ .macro alternative_if_not cap + .set .Lasm_alt_mode, 0 .pushsection .altinstructions, "a" altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f .popsection 661: .endm +.macro alternative_if cap + .set .Lasm_alt_mode, 1 + .pushsection .altinstructions, "a" + altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f + .popsection + .pushsection .altinstr_replacement, "ax" + .align 2 /* So GAS knows label 661 is suitably aligned */ +661: +.endm + /* - * Provide the alternative code sequence. - * - * The code that follows this macro is assembled into a special - * section to be used for dynamic patching. Code that follows this - * macro must: - * - * 1. Be exactly the same length (in bytes) as the default code - * sequence. - * - * 2. Not contain a branch target that is used outside of the - * alternative sequence it is defined in (branches into an - * alternative sequence are not fixed up). + * Provide the other half of the alternative code sequence. */ .macro alternative_else -662: .pushsection .altinstr_replacement, "ax" +662: + .if .Lasm_alt_mode==0 + .pushsection .altinstr_replacement, "ax" + .else + .popsection + .endif 663: .endm @@ -125,11 +147,25 @@ void apply_alternatives(void *start, size_t length); * Complete an alternative code sequence. */ .macro alternative_endif -664: .popsection +664: + .if .Lasm_alt_mode==0 + .popsection + .endif .org . - (664b-663b) + (662b-661b) .org . - (662b-661b) + (664b-663b) .endm +/* + * Provides a trivial alternative or default sequence consisting solely + * of NOPs. The number of NOPs is chosen automatically to match the + * previous case. + */ +.macro alternative_else_nop_endif +alternative_else + nops (662b-661b) / AARCH64_INSN_SIZE +alternative_endif +.endm + #define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...) \ alternative_insn insn1, insn2, cap, IS_ENABLED(cfg) diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 8ec88e5b290f..f8ae6d6e4767 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -28,6 +28,7 @@ #define ICC_CTLR_EL1 sys_reg(3, 0, 12, 12, 4) #define ICC_SRE_EL1 sys_reg(3, 0, 12, 12, 5) #define ICC_GRPEN1_EL1 sys_reg(3, 0, 12, 12, 7) +#define ICC_BPR1_EL1 sys_reg(3, 0, 12, 12, 3) #define ICC_SRE_EL2 sys_reg(3, 4, 12, 9, 5) @@ -79,6 +80,19 @@ #include <linux/stringify.h> #include <asm/barrier.h> +#define read_gicreg(r) \ + ({ \ + u64 reg; \ + asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg)); \ + reg; \ + }) + +#define write_gicreg(v,r) \ + do { \ + u64 __val = (v); \ + asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\ + } while (0) + /* * Low-level accessors * @@ -165,6 +179,11 @@ static inline void gic_write_sre(u32 val) isb(); } +static inline void gic_write_bpr1(u32 val) +{ + asm volatile("msr_s " __stringify(ICC_BPR1_EL1) ", %0" : : "r" (val)); +} + #define gic_read_typer(c) readq_relaxed(c) #define gic_write_irouter(v, c) writeq_relaxed(v, c) diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h index fbe0ca31a99c..eaa5bbe3fa87 100644 --- a/arch/arm64/include/asm/arch_timer.h +++ b/arch/arm64/include/asm/arch_timer.h @@ -20,13 +20,55 @@ #define __ASM_ARCH_TIMER_H #include <asm/barrier.h> +#include <asm/sysreg.h> #include <linux/bug.h> #include <linux/init.h> +#include <linux/jump_label.h> #include <linux/types.h> #include <clocksource/arm_arch_timer.h> +#if IS_ENABLED(CONFIG_FSL_ERRATUM_A008585) +extern struct static_key_false arch_timer_read_ool_enabled; +#define needs_fsl_a008585_workaround() \ + static_branch_unlikely(&arch_timer_read_ool_enabled) +#else +#define needs_fsl_a008585_workaround() false +#endif + +u32 __fsl_a008585_read_cntp_tval_el0(void); +u32 __fsl_a008585_read_cntv_tval_el0(void); +u64 __fsl_a008585_read_cntvct_el0(void); + +/* + * The number of retries is an arbitrary value well beyond the highest number + * of iterations the loop has been observed to take. + */ +#define __fsl_a008585_read_reg(reg) ({ \ + u64 _old, _new; \ + int _retries = 200; \ + \ + do { \ + _old = read_sysreg(reg); \ + _new = read_sysreg(reg); \ + _retries--; \ + } while (unlikely(_old != _new) && _retries); \ + \ + WARN_ON_ONCE(!_retries); \ + _new; \ +}) + +#define arch_timer_reg_read_stable(reg) \ +({ \ + u64 _val; \ + if (needs_fsl_a008585_workaround()) \ + _val = __fsl_a008585_read_##reg(); \ + else \ + _val = read_sysreg(reg); \ + _val; \ +}) + /* * These register accessors are marked inline so the compiler can * nicely work out which register we want, and chuck away the rest of @@ -38,19 +80,19 @@ void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val) if (access == ARCH_TIMER_PHYS_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: - asm volatile("msr cntp_ctl_el0, %0" : : "r" (val)); + write_sysreg(val, cntp_ctl_el0); break; case ARCH_TIMER_REG_TVAL: - asm volatile("msr cntp_tval_el0, %0" : : "r" (val)); + write_sysreg(val, cntp_tval_el0); break; } } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: - asm volatile("msr cntv_ctl_el0, %0" : : "r" (val)); + write_sysreg(val, cntv_ctl_el0); break; case ARCH_TIMER_REG_TVAL: - asm volatile("msr cntv_tval_el0, %0" : : "r" (val)); + write_sysreg(val, cntv_tval_el0); break; } } @@ -61,48 +103,38 @@ void arch_timer_reg_write_cp15(int access, enum arch_timer_reg reg, u32 val) static __always_inline u32 arch_timer_reg_read_cp15(int access, enum arch_timer_reg reg) { - u32 val; - if (access == ARCH_TIMER_PHYS_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: - asm volatile("mrs %0, cntp_ctl_el0" : "=r" (val)); - break; + return read_sysreg(cntp_ctl_el0); case ARCH_TIMER_REG_TVAL: - asm volatile("mrs %0, cntp_tval_el0" : "=r" (val)); - break; + return arch_timer_reg_read_stable(cntp_tval_el0); } } else if (access == ARCH_TIMER_VIRT_ACCESS) { switch (reg) { case ARCH_TIMER_REG_CTRL: - asm volatile("mrs %0, cntv_ctl_el0" : "=r" (val)); - break; + return read_sysreg(cntv_ctl_el0); case ARCH_TIMER_REG_TVAL: - asm volatile("mrs %0, cntv_tval_el0" : "=r" (val)); - break; + return arch_timer_reg_read_stable(cntv_tval_el0); } } - return val; + BUG(); } static inline u32 arch_timer_get_cntfrq(void) { - u32 val; - asm volatile("mrs %0, cntfrq_el0" : "=r" (val)); - return val; + return read_sysreg(cntfrq_el0); } static inline u32 arch_timer_get_cntkctl(void) { - u32 cntkctl; - asm volatile("mrs %0, cntkctl_el1" : "=r" (cntkctl)); - return cntkctl; + return read_sysreg(cntkctl_el1); } static inline void arch_timer_set_cntkctl(u32 cntkctl) { - asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl)); + write_sysreg(cntkctl, cntkctl_el1); } static inline u64 arch_counter_get_cntpct(void) @@ -116,12 +148,8 @@ static inline u64 arch_counter_get_cntpct(void) static inline u64 arch_counter_get_cntvct(void) { - u64 cval; - isb(); - asm volatile("mrs %0, cntvct_el0" : "=r" (cval)); - - return cval; + return arch_timer_reg_read_stable(cntvct_el0); } static inline int arch_timer_arch_init(void) diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h index d5025c69ca81..28bfe6132eb6 100644 --- a/arch/arm64/include/asm/assembler.h +++ b/arch/arm64/include/asm/assembler.h @@ -87,6 +87,15 @@ .endm /* + * NOP sequence + */ + .macro nops, num + .rept \num + nop + .endr + .endm + +/* * Emit an entry into the exception table */ .macro _asm_extable, from, to @@ -216,11 +225,26 @@ lr .req x30 // link register .macro mmid, rd, rn ldr \rd, [\rn, #MM_CONTEXT_ID] .endm +/* + * read_ctr - read CTR_EL0. If the system has mismatched + * cache line sizes, provide the system wide safe value + * from arm64_ftr_reg_ctrel0.sys_val + */ + .macro read_ctr, reg +alternative_if_not ARM64_MISMATCHED_CACHE_LINE_SIZE + mrs \reg, ctr_el0 // read CTR + nop +alternative_else + ldr_l \reg, arm64_ftr_reg_ctrel0 + ARM64_FTR_SYSVAL +alternative_endif + .endm + /* - * dcache_line_size - get the minimum D-cache line size from the CTR register. + * raw_dcache_line_size - get the minimum D-cache line size on this CPU + * from the CTR register. */ - .macro dcache_line_size, reg, tmp + .macro raw_dcache_line_size, reg, tmp mrs \tmp, ctr_el0 // read CTR ubfm \tmp, \tmp, #16, #19 // cache line size encoding mov \reg, #4 // bytes per word @@ -228,9 +252,20 @@ lr .req x30 // link register .endm /* - * icache_line_size - get the minimum I-cache line size from the CTR register. + * dcache_line_size - get the safe D-cache line size across all CPUs */ - .macro icache_line_size, reg, tmp + .macro dcache_line_size, reg, tmp + read_ctr \tmp + ubfm \tmp, \tmp, #16, #19 // cache line size encoding + mov \reg, #4 // bytes per word + lsl \reg, \reg, \tmp // actual cache line size + .endm + +/* + * raw_icache_line_size - get the minimum I-cache line size on this CPU + * from the CTR register. + */ + .macro raw_icache_line_size, reg, tmp mrs \tmp, ctr_el0 // read CTR and \tmp, \tmp, #0xf // cache line size encoding mov \reg, #4 // bytes per word @@ -238,6 +273,16 @@ lr .req x30 // link register .endm /* + * icache_line_size - get the safe I-cache line size across all CPUs + */ + .macro icache_line_size, reg, tmp + read_ctr \tmp + and \tmp, \tmp, #0xf // cache line size encoding + mov \reg, #4 // bytes per word + lsl \reg, \reg, \tmp // actual cache line size + .endm + +/* * tcr_set_idmap_t0sz - update TCR.T0SZ so that we can load the ID map */ .macro tcr_set_idmap_t0sz, valreg, tmpreg diff --git a/arch/arm64/include/asm/atomic_lse.h b/arch/arm64/include/asm/atomic_lse.h index b5890be8f257..7457ce082b5f 100644 --- a/arch/arm64/include/asm/atomic_lse.h +++ b/arch/arm64/include/asm/atomic_lse.h @@ -86,8 +86,8 @@ static inline int atomic_add_return##name(int i, atomic_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC(add_return##name), \ + __LL_SC_ATOMIC(add_return##name) \ + __nops(1), \ /* LSE atomics */ \ " ldadd" #mb " %w[i], w30, %[v]\n" \ " add %w[i], %w[i], w30") \ @@ -112,8 +112,8 @@ static inline void atomic_and(int i, atomic_t *v) asm volatile(ARM64_LSE_ATOMIC_INSN( /* LL/SC */ - " nop\n" - __LL_SC_ATOMIC(and), + __LL_SC_ATOMIC(and) + __nops(1), /* LSE atomics */ " mvn %w[i], %w[i]\n" " stclr %w[i], %[v]") @@ -130,8 +130,8 @@ static inline int atomic_fetch_and##name(int i, atomic_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC(fetch_and##name), \ + __LL_SC_ATOMIC(fetch_and##name) \ + __nops(1), \ /* LSE atomics */ \ " mvn %w[i], %w[i]\n" \ " ldclr" #mb " %w[i], %w[i], %[v]") \ @@ -156,8 +156,8 @@ static inline void atomic_sub(int i, atomic_t *v) asm volatile(ARM64_LSE_ATOMIC_INSN( /* LL/SC */ - " nop\n" - __LL_SC_ATOMIC(sub), + __LL_SC_ATOMIC(sub) + __nops(1), /* LSE atomics */ " neg %w[i], %w[i]\n" " stadd %w[i], %[v]") @@ -174,9 +174,8 @@ static inline int atomic_sub_return##name(int i, atomic_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ __LL_SC_ATOMIC(sub_return##name) \ - " nop", \ + __nops(2), \ /* LSE atomics */ \ " neg %w[i], %w[i]\n" \ " ldadd" #mb " %w[i], w30, %[v]\n" \ @@ -203,8 +202,8 @@ static inline int atomic_fetch_sub##name(int i, atomic_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC(fetch_sub##name), \ + __LL_SC_ATOMIC(fetch_sub##name) \ + __nops(1), \ /* LSE atomics */ \ " neg %w[i], %w[i]\n" \ " ldadd" #mb " %w[i], %w[i], %[v]") \ @@ -284,8 +283,8 @@ static inline long atomic64_add_return##name(long i, atomic64_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC64(add_return##name), \ + __LL_SC_ATOMIC64(add_return##name) \ + __nops(1), \ /* LSE atomics */ \ " ldadd" #mb " %[i], x30, %[v]\n" \ " add %[i], %[i], x30") \ @@ -310,8 +309,8 @@ static inline void atomic64_and(long i, atomic64_t *v) asm volatile(ARM64_LSE_ATOMIC_INSN( /* LL/SC */ - " nop\n" - __LL_SC_ATOMIC64(and), + __LL_SC_ATOMIC64(and) + __nops(1), /* LSE atomics */ " mvn %[i], %[i]\n" " stclr %[i], %[v]") @@ -328,8 +327,8 @@ static inline long atomic64_fetch_and##name(long i, atomic64_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC64(fetch_and##name), \ + __LL_SC_ATOMIC64(fetch_and##name) \ + __nops(1), \ /* LSE atomics */ \ " mvn %[i], %[i]\n" \ " ldclr" #mb " %[i], %[i], %[v]") \ @@ -354,8 +353,8 @@ static inline void atomic64_sub(long i, atomic64_t *v) asm volatile(ARM64_LSE_ATOMIC_INSN( /* LL/SC */ - " nop\n" - __LL_SC_ATOMIC64(sub), + __LL_SC_ATOMIC64(sub) + __nops(1), /* LSE atomics */ " neg %[i], %[i]\n" " stadd %[i], %[v]") @@ -372,9 +371,8 @@ static inline long atomic64_sub_return##name(long i, atomic64_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ __LL_SC_ATOMIC64(sub_return##name) \ - " nop", \ + __nops(2), \ /* LSE atomics */ \ " neg %[i], %[i]\n" \ " ldadd" #mb " %[i], x30, %[v]\n" \ @@ -401,8 +399,8 @@ static inline long atomic64_fetch_sub##name(long i, atomic64_t *v) \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_ATOMIC64(fetch_sub##name), \ + __LL_SC_ATOMIC64(fetch_sub##name) \ + __nops(1), \ /* LSE atomics */ \ " neg %[i], %[i]\n" \ " ldadd" #mb " %[i], %[i], %[v]") \ @@ -426,13 +424,8 @@ static inline long atomic64_dec_if_positive(atomic64_t *v) asm volatile(ARM64_LSE_ATOMIC_INSN( /* LL/SC */ - " nop\n" __LL_SC_ATOMIC64(dec_if_positive) - " nop\n" - " nop\n" - " nop\n" - " nop\n" - " nop", + __nops(6), /* LSE atomics */ "1: ldr x30, %[v]\n" " subs %[ret], x30, #1\n" @@ -464,9 +457,8 @@ static inline unsigned long __cmpxchg_case_##name(volatile void *ptr, \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - __LL_SC_CMPXCHG(name) \ - " nop", \ + __LL_SC_CMPXCHG(name) \ + __nops(2), \ /* LSE atomics */ \ " mov " #w "30, %" #w "[old]\n" \ " cas" #mb #sz "\t" #w "30, %" #w "[new], %[v]\n" \ @@ -517,10 +509,8 @@ static inline long __cmpxchg_double##name(unsigned long old1, \ \ asm volatile(ARM64_LSE_ATOMIC_INSN( \ /* LL/SC */ \ - " nop\n" \ - " nop\n" \ - " nop\n" \ - __LL_SC_CMPXCHG_DBL(name), \ + __LL_SC_CMPXCHG_DBL(name) \ + __nops(3), \ /* LSE atomics */ \ " casp" #mb "\t%[old1], %[old2], %[new1], %[new2], %[v]\n"\ " eor %[old1], %[old1], %[oldval1]\n" \ diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 4eea7f618dce..4e0497f581a0 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -20,6 +20,9 @@ #ifndef __ASSEMBLY__ +#define __nops(n) ".rept " #n "\nnop\n.endr\n" +#define nops(n) asm volatile(__nops(n)) + #define sev() asm volatile("sev" : : : "memory") #define wfe() asm volatile("wfe" : : : "memory") #define wfi() asm volatile("wfi" : : : "memory") diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h index c64268dbff64..2e5fb976a572 100644 --- a/arch/arm64/include/asm/cacheflush.h +++ b/arch/arm64/include/asm/cacheflush.h @@ -68,6 +68,7 @@ extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void flush_icache_range(unsigned long start, unsigned long end); extern void __flush_dcache_area(void *addr, size_t len); +extern void __clean_dcache_area_poc(void *addr, size_t len); extern void __clean_dcache_area_pou(void *addr, size_t len); extern long __flush_cache_user_range(unsigned long start, unsigned long end); @@ -85,7 +86,7 @@ static inline void flush_cache_page(struct vm_area_struct *vma, */ extern void __dma_map_area(const void *, size_t, int); extern void __dma_unmap_area(const void *, size_t, int); -extern void __dma_flush_range(const void *, const void *); +extern void __dma_flush_area(const void *, size_t); /* * Copy user data from/to a page which is mapped into a different diff --git a/arch/arm64/include/asm/clocksource.h b/arch/arm64/include/asm/clocksource.h new file mode 100644 index 000000000000..0b350a7e26f3 --- /dev/null +++ b/arch/arm64/include/asm/clocksource.h @@ -0,0 +1,8 @@ +#ifndef _ASM_CLOCKSOURCE_H +#define _ASM_CLOCKSOURCE_H + +struct arch_clocksource_data { + bool vdso_direct; /* Usable for direct VDSO access? */ +}; + +#endif diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h index bd86a79491bc..91b26d26af8a 100644 --- a/arch/arm64/include/asm/cmpxchg.h +++ b/arch/arm64/include/asm/cmpxchg.h @@ -43,10 +43,8 @@ static inline unsigned long __xchg_case_##name(unsigned long x, \ " cbnz %w1, 1b\n" \ " " #mb, \ /* LSE atomics */ \ - " nop\n" \ - " nop\n" \ " swp" #acq_lse #rel #sz "\t%" #w "3, %" #w "0, %2\n" \ - " nop\n" \ + __nops(3) \ " " #nop_lse) \ : "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr) \ : "r" (x) \ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 7099f26e3702..758d74fedfad 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -9,6 +9,8 @@ #ifndef __ASM_CPUFEATURE_H #define __ASM_CPUFEATURE_H +#include <linux/jump_label.h> + #include <asm/hwcap.h> #include <asm/sysreg.h> @@ -37,8 +39,9 @@ #define ARM64_WORKAROUND_CAVIUM_27456 12 #define ARM64_HAS_32BIT_EL0 13 #define ARM64_HYP_OFFSET_LOW 14 +#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 -#define ARM64_NCAPS 15 +#define ARM64_NCAPS 16 #ifndef __ASSEMBLY__ @@ -63,7 +66,7 @@ struct arm64_ftr_bits { enum ftr_type type; u8 shift; u8 width; - s64 safe_val; /* safe value for discrete features */ + s64 safe_val; /* safe value for FTR_EXACT features */ }; /* @@ -72,13 +75,14 @@ struct arm64_ftr_bits { * @sys_val Safe value across the CPUs (system view) */ struct arm64_ftr_reg { - u32 sys_id; - const char *name; - u64 strict_mask; - u64 sys_val; - struct arm64_ftr_bits *ftr_bits; + const char *name; + u64 strict_mask; + u64 sys_val; + const struct arm64_ftr_bits *ftr_bits; }; +extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0; + /* scope of capability check */ enum { SCOPE_SYSTEM, @@ -109,6 +113,7 @@ struct arm64_cpu_capabilities { }; extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); +extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS]; bool this_cpu_has_cap(unsigned int cap); @@ -121,16 +126,21 @@ static inline bool cpus_have_cap(unsigned int num) { if (num >= ARM64_NCAPS) return false; - return test_bit(num, cpu_hwcaps); + if (__builtin_constant_p(num)) + return static_branch_unlikely(&cpu_hwcap_keys[num]); + else + return test_bit(num, cpu_hwcaps); } static inline void cpus_set_cap(unsigned int num) { - if (num >= ARM64_NCAPS) + if (num >= ARM64_NCAPS) { pr_warn("Attempt to set an illegal CPU capability (%d >= %d)\n", num, ARM64_NCAPS); - else + } else { __set_bit(num, cpu_hwcaps); + static_branch_enable(&cpu_hwcap_keys[num]); + } } static inline int __attribute_const__ @@ -157,7 +167,7 @@ cpuid_feature_extract_unsigned_field(u64 features, int field) return cpuid_feature_extract_unsigned_field_width(features, field, 4); } -static inline u64 arm64_ftr_mask(struct arm64_ftr_bits *ftrp) +static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp) { return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift); } @@ -170,7 +180,7 @@ cpuid_feature_extract_field(u64 features, int field, bool sign) cpuid_feature_extract_unsigned_field(features, field); } -static inline s64 arm64_ftr_value(struct arm64_ftr_bits *ftrp, u64 val) +static inline s64 arm64_ftr_value(const struct arm64_ftr_bits *ftrp, u64 val) { return (s64)cpuid_feature_extract_field(val, ftrp->shift, ftrp->sign); } @@ -193,11 +203,11 @@ void __init setup_cpu_features(void); void update_cpu_capabilities(const struct arm64_cpu_capabilities *caps, const char *info); void enable_cpu_capabilities(const struct arm64_cpu_capabilities *caps); -void check_local_cpu_errata(void); -void __init enable_errata_workarounds(void); +void check_local_cpu_capabilities(void); -void verify_local_cpu_errata(void); -void verify_local_cpu_capabilities(void); +void update_cpu_errata_workarounds(void); +void __init enable_errata_workarounds(void); +void verify_local_cpu_errata_workarounds(void); u64 read_system_reg(u32 id); diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 9d9fd4b9a72e..26a68ddb11c1 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -93,11 +93,7 @@ #include <asm/sysreg.h> -#define read_cpuid(reg) ({ \ - u64 __val; \ - asm("mrs_s %0, " __stringify(SYS_ ## reg) : "=r" (__val)); \ - __val; \ -}) +#define read_cpuid(reg) read_sysreg_s(SYS_ ## reg) /* * The CPU ID never changes at run time, so we might as well tell the diff --git a/arch/arm64/include/asm/dcc.h b/arch/arm64/include/asm/dcc.h index 65e0190e97c8..836b05630003 100644 --- a/arch/arm64/include/asm/dcc.h +++ b/arch/arm64/include/asm/dcc.h @@ -21,21 +21,16 @@ #define __ASM_DCC_H #include <asm/barrier.h> +#include <asm/sysreg.h> static inline u32 __dcc_getstatus(void) { - u32 ret; - - asm volatile("mrs %0, mdccsr_el0" : "=r" (ret)); - - return ret; + return read_sysreg(mdccsr_el0); } static inline char __dcc_getchar(void) { - char c; - - asm volatile("mrs %0, dbgdtrrx_el0" : "=r" (c)); + char c = read_sysreg(dbgdtrrx_el0); isb(); return c; @@ -47,8 +42,7 @@ static inline void __dcc_putchar(char c) * The typecast is to make absolutely certain that 'c' is * zero-extended. */ - asm volatile("msr dbgdtrtx_el0, %0" - : : "r" ((unsigned long)(unsigned char)c)); + write_sysreg((unsigned char)c, dbgdtrtx_el0); isb(); } diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 4b6b3f72a215..b71420a12f26 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -61,8 +61,6 @@ #define AARCH64_BREAK_KGDB_DYN_DBG \ (AARCH64_BREAK_MON | (KGDB_DYN_DBG_BRK_IMM << 5)) -#define KGDB_DYN_BRK_INS_BYTE(x) \ - ((AARCH64_BREAK_KGDB_DYN_DBG >> (8 * (x))) & 0xff) #define CACHE_FLUSH_IS_SAFE 1 diff --git a/arch/arm64/include/asm/esr.h b/arch/arm64/include/asm/esr.h index f772e15c4766..d14c478976d0 100644 --- a/arch/arm64/include/asm/esr.h +++ b/arch/arm64/include/asm/esr.h @@ -78,6 +78,23 @@ #define ESR_ELx_IL (UL(1) << 25) #define ESR_ELx_ISS_MASK (ESR_ELx_IL - 1) + +/* ISS field definitions shared by different classes */ +#define ESR_ELx_WNR (UL(1) << 6) + +/* Shared ISS field definitions for Data/Instruction aborts */ +#define ESR_ELx_EA (UL(1) << 9) +#define ESR_ELx_S1PTW (UL(1) << 7) + +/* Shared ISS fault status code(IFSC/DFSC) for Data/Instruction aborts */ +#define ESR_ELx_FSC (0x3F) +#define ESR_ELx_FSC_TYPE (0x3C) +#define ESR_ELx_FSC_EXTABT (0x10) +#define ESR_ELx_FSC_ACCESS (0x08) +#define ESR_ELx_FSC_FAULT (0x04) +#define ESR_ELx_FSC_PERM (0x0C) + +/* ISS field definitions for Data Aborts */ #define ESR_ELx_ISV (UL(1) << 24) #define ESR_ELx_SAS_SHIFT (22) #define ESR_ELx_SAS (UL(3) << ESR_ELx_SAS_SHIFT) @@ -86,16 +103,9 @@ #define ESR_ELx_SRT_MASK (UL(0x1F) << ESR_ELx_SRT_SHIFT) #define ESR_ELx_SF (UL(1) << 15) #define ESR_ELx_AR (UL(1) << 14) -#define ESR_ELx_EA (UL(1) << 9) #define ESR_ELx_CM (UL(1) << 8) -#define ESR_ELx_S1PTW (UL(1) << 7) -#define ESR_ELx_WNR (UL(1) << 6) -#define ESR_ELx_FSC (0x3F) -#define ESR_ELx_FSC_TYPE (0x3C) -#define ESR_ELx_FSC_EXTABT (0x10) -#define ESR_ELx_FSC_ACCESS (0x08) -#define ESR_ELx_FSC_FAULT (0x04) -#define ESR_ELx_FSC_PERM (0x0C) + +/* ISS field definitions for exceptions taken in to Hyp */ #define ESR_ELx_CV (UL(1) << 24) #define ESR_ELx_COND_SHIFT (20) #define ESR_ELx_COND_MASK (UL(0xF) << ESR_ELx_COND_SHIFT) @@ -109,6 +119,62 @@ ((ESR_ELx_EC_BRK64 << ESR_ELx_EC_SHIFT) | ESR_ELx_IL | \ ((imm) & 0xffff)) +/* ISS field definitions for System instruction traps */ +#define ESR_ELx_SYS64_ISS_RES0_SHIFT 22 +#define ESR_ELx_SYS64_ISS_RES0_MASK (UL(0x7) << ESR_ELx_SYS64_ISS_RES0_SHIFT) +#define ESR_ELx_SYS64_ISS_DIR_MASK 0x1 +#define ESR_ELx_SYS64_ISS_DIR_READ 0x1 +#define ESR_ELx_SYS64_ISS_DIR_WRITE 0x0 + +#define ESR_ELx_SYS64_ISS_RT_SHIFT 5 +#define ESR_ELx_SYS64_ISS_RT_MASK (UL(0x1f) << ESR_ELx_SYS64_ISS_RT_SHIFT) +#define ESR_ELx_SYS64_ISS_CRM_SHIFT 1 +#define ESR_ELx_SYS64_ISS_CRM_MASK (UL(0xf) << ESR_ELx_SYS64_ISS_CRM_SHIFT) +#define ESR_ELx_SYS64_ISS_CRN_SHIFT 10 +#define ESR_ELx_SYS64_ISS_CRN_MASK (UL(0xf) << ESR_ELx_SYS64_ISS_CRN_SHIFT) +#define ESR_ELx_SYS64_ISS_OP1_SHIFT 14 +#define ESR_ELx_SYS64_ISS_OP1_MASK (UL(0x7) << ESR_ELx_SYS64_ISS_OP1_SHIFT) +#define ESR_ELx_SYS64_ISS_OP2_SHIFT 17 +#define ESR_ELx_SYS64_ISS_OP2_MASK (UL(0x7) << ESR_ELx_SYS64_ISS_OP2_SHIFT) +#define ESR_ELx_SYS64_ISS_OP0_SHIFT 20 +#define ESR_ELx_SYS64_ISS_OP0_MASK (UL(0x3) << ESR_ELx_SYS64_ISS_OP0_SHIFT) +#define ESR_ELx_SYS64_ISS_SYS_MASK (ESR_ELx_SYS64_ISS_OP0_MASK | \ + ESR_ELx_SYS64_ISS_OP1_MASK | \ + ESR_ELx_SYS64_ISS_OP2_MASK | \ + ESR_ELx_SYS64_ISS_CRN_MASK | \ + ESR_ELx_SYS64_ISS_CRM_MASK) +#define ESR_ELx_SYS64_ISS_SYS_VAL(op0, op1, op2, crn, crm) \ + (((op0) << ESR_ELx_SYS64_ISS_OP0_SHIFT) | \ + ((op1) << ESR_ELx_SYS64_ISS_OP1_SHIFT) | \ + ((op2) << ESR_ELx_SYS64_ISS_OP2_SHIFT) | \ + ((crn) << ESR_ELx_SYS64_ISS_CRN_SHIFT) | \ + ((crm) << ESR_ELx_SYS64_ISS_CRM_SHIFT)) + +#define ESR_ELx_SYS64_ISS_SYS_OP_MASK (ESR_ELx_SYS64_ISS_SYS_MASK | \ + ESR_ELx_SYS64_ISS_DIR_MASK) +/* + * User space cache operations have the following sysreg encoding + * in System instructions. + * op0=1, op1=3, op2=1, crn=7, crm={ 5, 10, 11, 14 }, WRITE (L=0) + */ +#define ESR_ELx_SYS64_ISS_CRM_DC_CIVAC 14 +#define ESR_ELx_SYS64_ISS_CRM_DC_CVAU 11 +#define ESR_ELx_SYS64_ISS_CRM_DC_CVAC 10 +#define ESR_ELx_SYS64_ISS_CRM_IC_IVAU 5 + +#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK (ESR_ELx_SYS64_ISS_OP0_MASK | \ + ESR_ELx_SYS64_ISS_OP1_MASK | \ + ESR_ELx_SYS64_ISS_OP2_MASK | \ + ESR_ELx_SYS64_ISS_CRN_MASK | \ + ESR_ELx_SYS64_ISS_DIR_MASK) +#define ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL \ + (ESR_ELx_SYS64_ISS_SYS_VAL(1, 3, 1, 7, 0) | \ + ESR_ELx_SYS64_ISS_DIR_WRITE) + +#define ESR_ELx_SYS64_ISS_SYS_CTR ESR_ELx_SYS64_ISS_SYS_VAL(3, 3, 1, 0, 0) +#define ESR_ELx_SYS64_ISS_SYS_CTR_READ (ESR_ELx_SYS64_ISS_SYS_CTR | \ + ESR_ELx_SYS64_ISS_DIR_READ) + #ifndef __ASSEMBLY__ #include <asm/types.h> diff --git a/arch/arm64/include/asm/hw_breakpoint.h b/arch/arm64/include/asm/hw_breakpoint.h index 115ea2a64520..9510ace570e2 100644 --- a/arch/arm64/include/asm/hw_breakpoint.h +++ b/arch/arm64/include/asm/hw_breakpoint.h @@ -18,6 +18,7 @@ #include <asm/cputype.h> #include <asm/cpufeature.h> +#include <asm/sysreg.h> #include <asm/virt.h> #ifdef __KERNEL__ @@ -98,18 +99,18 @@ static inline void decode_ctrl_reg(u32 reg, #define AARCH64_DBG_REG_WCR (AARCH64_DBG_REG_WVR + ARM_MAX_WRP) /* Debug register names. */ -#define AARCH64_DBG_REG_NAME_BVR "bvr" -#define AARCH64_DBG_REG_NAME_BCR "bcr" -#define AARCH64_DBG_REG_NAME_WVR "wvr" -#define AARCH64_DBG_REG_NAME_WCR "wcr" +#define AARCH64_DBG_REG_NAME_BVR bvr +#define AARCH64_DBG_REG_NAME_BCR bcr +#define AARCH64_DBG_REG_NAME_WVR wvr +#define AARCH64_DBG_REG_NAME_WCR wcr /* Accessor macros for the debug registers. */ #define AARCH64_DBG_READ(N, REG, VAL) do {\ - asm volatile("mrs %0, dbg" REG #N "_el1" : "=r" (VAL));\ + VAL = read_sysreg(dbg##REG##N##_el1);\ } while (0) #define AARCH64_DBG_WRITE(N, REG, VAL) do {\ - asm volatile("msr dbg" REG #N "_el1, %0" :: "r" (VAL));\ + write_sysreg(VAL, dbg##REG##N##_el1);\ } while (0) struct task_struct; @@ -141,8 +142,6 @@ static inline void ptrace_hw_copy_thread(struct task_struct *task) } #endif -extern struct pmu perf_ops_bp; - /* Determine number of BRP registers available. */ static inline int get_num_brps(void) { diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index 1dbaa901d7e5..bc853663dd51 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -246,7 +246,8 @@ static __always_inline bool aarch64_insn_is_##abbr(u32 code) \ static __always_inline u32 aarch64_insn_get_##abbr##_value(void) \ { return (val); } -__AARCH64_INSN_FUNCS(adr_adrp, 0x1F000000, 0x10000000) +__AARCH64_INSN_FUNCS(adr, 0x9F000000, 0x10000000) +__AARCH64_INSN_FUNCS(adrp, 0x9F000000, 0x90000000) __AARCH64_INSN_FUNCS(prfm_lit, 0xFF000000, 0xD8000000) __AARCH64_INSN_FUNCS(str_reg, 0x3FE0EC00, 0x38206800) __AARCH64_INSN_FUNCS(ldr_reg, 0x3FE0EC00, 0x38606800) @@ -318,6 +319,11 @@ __AARCH64_INSN_FUNCS(msr_reg, 0xFFF00000, 0xD5100000) bool aarch64_insn_is_nop(u32 insn); bool aarch64_insn_is_branch_imm(u32 insn); +static inline bool aarch64_insn_is_adr_adrp(u32 insn) +{ + return aarch64_insn_is_adr(insn) || aarch64_insn_is_adrp(insn); +} + int aarch64_insn_read(void *addr, u32 *insnp); int aarch64_insn_write(void *addr, u32 insn); enum aarch64_insn_encoding_class aarch64_get_insn_class(u32 insn); @@ -398,6 +404,9 @@ int aarch64_insn_patch_text_nosync(void *addr, u32 insn); int aarch64_insn_patch_text_sync(void *addrs[], u32 insns[], int cnt); int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt); +s32 aarch64_insn_adrp_get_offset(u32 insn); +u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset); + bool aarch32_insn_is_wide(u32 insn); #define A32_RN_OFFSET 16 diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h index 9b6e408cfa51..0bba427bb4c2 100644 --- a/arch/arm64/include/asm/io.h +++ b/arch/arm64/include/asm/io.h @@ -40,25 +40,25 @@ #define __raw_writeb __raw_writeb static inline void __raw_writeb(u8 val, volatile void __iomem *addr) { - asm volatile("strb %w0, [%1]" : : "r" (val), "r" (addr)); + asm volatile("strb %w0, [%1]" : : "rZ" (val), "r" (addr)); } #define __raw_writew __raw_writew static inline void __raw_writew(u16 val, volatile void __iomem *addr) { - asm volatile("strh %w0, [%1]" : : "r" (val), "r" (addr)); + asm volatile("strh %w0, [%1]" : : "rZ" (val), "r" (addr)); } #define __raw_writel __raw_writel static inline void __raw_writel(u32 val, volatile void __iomem *addr) { - asm volatile("str %w0, [%1]" : : "r" (val), "r" (addr)); + asm volatile("str %w0, [%1]" : : "rZ" (val), "r" (addr)); } #define __raw_writeq __raw_writeq static inline void __raw_writeq(u64 val, volatile void __iomem *addr) { - asm volatile("str %0, [%1]" : : "r" (val), "r" (addr)); + asm volatile("str %x0, [%1]" : : "rZ" (val), "r" (addr)); } #define __raw_readb __raw_readb @@ -184,17 +184,6 @@ extern void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size); #define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); }) #define iowrite64be(v,p) ({ __iowmb(); __raw_writeq((__force __u64)cpu_to_be64(v), p); }) -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - #include <asm-generic/io.h> /* diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index 4b5c977af465..2a2752b5b6aa 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -50,7 +50,7 @@ #define HCR_BSU (3 << 10) #define HCR_BSU_IS (UL(1) << 10) #define HCR_FB (UL(1) << 9) -#define HCR_VA (UL(1) << 8) +#define HCR_VSE (UL(1) << 8) #define HCR_VI (UL(1) << 7) #define HCR_VF (UL(1) << 6) #define HCR_AMO (UL(1) << 5) @@ -80,7 +80,7 @@ #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \ HCR_TVM | HCR_BSU_IS | HCR_FB | HCR_TAC | \ HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW) -#define HCR_VIRT_EXCP_MASK (HCR_VA | HCR_VI | HCR_VF) +#define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF) #define HCR_INT_OVERRIDE (HCR_FMO | HCR_IMO) #define HCR_HOST_VHE_FLAGS (HCR_RW | HCR_TGE | HCR_E2H) diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 7561f63f1c28..18f746551bf6 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -20,10 +20,15 @@ #include <asm/virt.h> +#define ARM_EXIT_WITH_SERROR_BIT 31 +#define ARM_EXCEPTION_CODE(x) ((x) & ~(1U << ARM_EXIT_WITH_SERROR_BIT)) +#define ARM_SERROR_PENDING(x) !!((x) & (1U << ARM_EXIT_WITH_SERROR_BIT)) + #define ARM_EXCEPTION_IRQ 0 -#define ARM_EXCEPTION_TRAP 1 +#define ARM_EXCEPTION_EL1_SERROR 1 +#define ARM_EXCEPTION_TRAP 2 /* The hyp-stub will return this for any kvm_call_hyp() call */ -#define ARM_EXCEPTION_HYP_GONE 2 +#define ARM_EXCEPTION_HYP_GONE 3 #define KVM_ARM64_DEBUG_DIRTY_SHIFT 0 #define KVM_ARM64_DEBUG_DIRTY (1 << KVM_ARM64_DEBUG_DIRTY_SHIFT) diff --git a/arch/arm64/include/asm/kvm_emulate.h b/arch/arm64/include/asm/kvm_emulate.h index 4cdeae3b17c6..fd9d5fd788f5 100644 --- a/arch/arm64/include/asm/kvm_emulate.h +++ b/arch/arm64/include/asm/kvm_emulate.h @@ -38,6 +38,7 @@ bool kvm_condition_valid32(const struct kvm_vcpu *vcpu); void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr); void kvm_inject_undefined(struct kvm_vcpu *vcpu); +void kvm_inject_vabt(struct kvm_vcpu *vcpu); void kvm_inject_dabt(struct kvm_vcpu *vcpu, unsigned long addr); void kvm_inject_pabt(struct kvm_vcpu *vcpu, unsigned long addr); @@ -147,6 +148,16 @@ static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu) return vcpu->arch.fault.esr_el2; } +static inline int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu) +{ + u32 esr = kvm_vcpu_get_hsr(vcpu); + + if (esr & ESR_ELx_CV) + return (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT; + + return -1; +} + static inline unsigned long kvm_vcpu_get_hfar(const struct kvm_vcpu *vcpu) { return vcpu->arch.fault.far_el2; diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 3eda975837d0..bd94e6766759 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -290,15 +290,15 @@ struct kvm_vcpu_arch { #endif struct kvm_vm_stat { - u32 remote_tlb_flush; + ulong remote_tlb_flush; }; struct kvm_vcpu_stat { - u32 halt_successful_poll; - u32 halt_attempted_poll; - u32 halt_poll_invalid; - u32 halt_wakeup; - u32 hvc_exit_stat; + u64 halt_successful_poll; + u64 halt_attempted_poll; + u64 halt_poll_invalid; + u64 halt_wakeup; + u64 hvc_exit_stat; u64 wfe_exit_stat; u64 wfi_exit_stat; u64 mmio_exit_user; diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h index cff510574fae..b18e852d27e8 100644 --- a/arch/arm64/include/asm/kvm_hyp.h +++ b/arch/arm64/include/asm/kvm_hyp.h @@ -123,6 +123,7 @@ typeof(orig) * __hyp_text fname(void) \ void __vgic_v2_save_state(struct kvm_vcpu *vcpu); void __vgic_v2_restore_state(struct kvm_vcpu *vcpu); +int __vgic_v2_perform_cpuif_access(struct kvm_vcpu *vcpu); void __vgic_v3_save_state(struct kvm_vcpu *vcpu); void __vgic_v3_restore_state(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index b6bb83400cd8..a79b969c26fc 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -99,14 +99,10 @@ .macro kern_hyp_va reg alternative_if_not ARM64_HAS_VIRT_HOST_EXTN and \reg, \reg, #HYP_PAGE_OFFSET_HIGH_MASK -alternative_else - nop -alternative_endif -alternative_if_not ARM64_HYP_OFFSET_LOW - nop -alternative_else +alternative_else_nop_endif +alternative_if ARM64_HYP_OFFSET_LOW and \reg, \reg, #HYP_PAGE_OFFSET_LOW_MASK -alternative_endif +alternative_else_nop_endif .endm #else @@ -166,12 +162,6 @@ void kvm_clear_hyp_idmap(void); #define kvm_set_pte(ptep, pte) set_pte(ptep, pte) #define kvm_set_pmd(pmdp, pmd) set_pmd(pmdp, pmd) -static inline void kvm_clean_pgd(pgd_t *pgd) {} -static inline void kvm_clean_pmd(pmd_t *pmd) {} -static inline void kvm_clean_pmd_entry(pmd_t *pmd) {} -static inline void kvm_clean_pte(pte_t *pte) {} -static inline void kvm_clean_pte_entry(pte_t *pte) {} - static inline pte_t kvm_s2pte_mkwrite(pte_t pte) { pte_val(pte) |= PTE_S2_RDWR; diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index 31b73227b41f..ba62df8c6e35 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -214,7 +214,7 @@ static inline void *phys_to_virt(phys_addr_t x) #ifndef CONFIG_SPARSEMEM_VMEMMAP #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) +#define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #else #define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page)) #define __page_to_voff(kaddr) (((u64)(page) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page)) @@ -222,11 +222,15 @@ static inline void *phys_to_virt(phys_addr_t x) #define page_to_virt(page) ((void *)((__page_to_voff(page)) | PAGE_OFFSET)) #define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START)) -#define virt_addr_valid(kaddr) pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \ +#define _virt_addr_valid(kaddr) pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \ + PHYS_OFFSET) >> PAGE_SHIFT) #endif #endif +#define _virt_addr_is_linear(kaddr) (((u64)(kaddr)) >= PAGE_OFFSET) +#define virt_addr_valid(kaddr) (_virt_addr_is_linear(kaddr) && \ + _virt_addr_valid(kaddr)) + #include <asm-generic/memory_model.h> #endif diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h index b1892a0dbcb0..a50185375f09 100644 --- a/arch/arm64/include/asm/mmu_context.h +++ b/arch/arm64/include/asm/mmu_context.h @@ -27,22 +27,17 @@ #include <asm-generic/mm_hooks.h> #include <asm/cputype.h> #include <asm/pgtable.h> +#include <asm/sysreg.h> #include <asm/tlbflush.h> -#ifdef CONFIG_PID_IN_CONTEXTIDR -static inline void contextidr_thread_switch(struct task_struct *next) -{ - asm( - " msr contextidr_el1, %0\n" - " isb" - : - : "r" (task_pid_nr(next))); -} -#else static inline void contextidr_thread_switch(struct task_struct *next) { + if (!IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR)) + return; + + write_sysreg(task_pid_nr(next), contextidr_el1); + isb(); } -#endif /* * Set TTBR0 to empty_zero_page. No translations will be possible via TTBR0. @@ -51,11 +46,8 @@ static inline void cpu_set_reserved_ttbr0(void) { unsigned long ttbr = virt_to_phys(empty_zero_page); - asm( - " msr ttbr0_el1, %0 // set TTBR0\n" - " isb" - : - : "r" (ttbr)); + write_sysreg(ttbr, ttbr0_el1); + isb(); } /* @@ -81,13 +73,11 @@ static inline void __cpu_set_tcr_t0sz(unsigned long t0sz) if (!__cpu_uses_extended_idmap()) return; - asm volatile ( - " mrs %0, tcr_el1 ;" - " bfi %0, %1, %2, %3 ;" - " msr tcr_el1, %0 ;" - " isb" - : "=&r" (tcr) - : "r"(t0sz), "I"(TCR_T0SZ_OFFSET), "I"(TCR_TxSZ_WIDTH)); + tcr = read_sysreg(tcr_el1); + tcr &= ~TCR_T0SZ_MASK; + tcr |= t0sz << TCR_T0SZ_OFFSET; + write_sysreg(tcr, tcr_el1); + isb(); } #define cpu_set_default_tcr_t0sz() __cpu_set_tcr_t0sz(TCR_T0SZ(VA_BITS)) diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h index c3ae239db3ee..eb0c2bd90de9 100644 --- a/arch/arm64/include/asm/pgtable-hwdef.h +++ b/arch/arm64/include/asm/pgtable-hwdef.h @@ -208,6 +208,7 @@ #define TCR_T1SZ(x) ((UL(64) - (x)) << TCR_T1SZ_OFFSET) #define TCR_TxSZ(x) (TCR_T0SZ(x) | TCR_T1SZ(x)) #define TCR_TxSZ_WIDTH 6 +#define TCR_T0SZ_MASK (((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET) #define TCR_IRGN0_SHIFT 8 #define TCR_IRGN0_MASK (UL(3) << TCR_IRGN0_SHIFT) diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h index 39f5252673f7..2142c7726e76 100644 --- a/arch/arm64/include/asm/pgtable-prot.h +++ b/arch/arm64/include/asm/pgtable-prot.h @@ -70,12 +70,13 @@ #define PAGE_COPY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) #define PAGE_READONLY __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN) #define PAGE_READONLY_EXEC __pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN) +#define PAGE_EXECONLY __pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN) #define __P000 PAGE_NONE #define __P001 PAGE_READONLY #define __P010 PAGE_COPY #define __P011 PAGE_COPY -#define __P100 PAGE_READONLY_EXEC +#define __P100 PAGE_EXECONLY #define __P101 PAGE_READONLY_EXEC #define __P110 PAGE_COPY_EXEC #define __P111 PAGE_COPY_EXEC @@ -84,7 +85,7 @@ #define __S001 PAGE_READONLY #define __S010 PAGE_SHARED #define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY_EXEC +#define __S100 PAGE_EXECONLY #define __S101 PAGE_READONLY_EXEC #define __S110 PAGE_SHARED_EXEC #define __S111 PAGE_SHARED_EXEC diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index e20bd431184a..ffbb9a520563 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -73,7 +73,7 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define pte_write(pte) (!!(pte_val(pte) & PTE_WRITE)) #define pte_exec(pte) (!(pte_val(pte) & PTE_UXN)) #define pte_cont(pte) (!!(pte_val(pte) & PTE_CONT)) -#define pte_user(pte) (!!(pte_val(pte) & PTE_USER)) +#define pte_ng(pte) (!!(pte_val(pte) & PTE_NG)) #ifdef CONFIG_ARM64_HW_AFDBM #define pte_hw_dirty(pte) (pte_write(pte) && !(pte_val(pte) & PTE_RDONLY)) @@ -84,8 +84,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; #define pte_dirty(pte) (pte_sw_dirty(pte) || pte_hw_dirty(pte)) #define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID)) -#define pte_valid_not_user(pte) \ - ((pte_val(pte) & (PTE_VALID | PTE_USER)) == PTE_VALID) +#define pte_valid_global(pte) \ + ((pte_val(pte) & (PTE_VALID | PTE_NG)) == PTE_VALID) #define pte_valid_young(pte) \ ((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF)) @@ -155,6 +155,16 @@ static inline pte_t pte_mknoncont(pte_t pte) return clear_pte_bit(pte, __pgprot(PTE_CONT)); } +static inline pte_t pte_clear_rdonly(pte_t pte) +{ + return clear_pte_bit(pte, __pgprot(PTE_RDONLY)); +} + +static inline pte_t pte_mkpresent(pte_t pte) +{ + return set_pte_bit(pte, __pgprot(PTE_VALID)); +} + static inline pmd_t pmd_mkcont(pmd_t pmd) { return __pmd(pmd_val(pmd) | PMD_SECT_CONT); @@ -168,7 +178,7 @@ static inline void set_pte(pte_t *ptep, pte_t pte) * Only if the new pte is valid and kernel, otherwise TLB maintenance * or update_mmu_cache() have the necessary barriers. */ - if (pte_valid_not_user(pte)) { + if (pte_valid_global(pte)) { dsb(ishst); isb(); } @@ -202,7 +212,7 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_val(pte) &= ~PTE_RDONLY; else pte_val(pte) |= PTE_RDONLY; - if (pte_user(pte) && pte_exec(pte) && !pte_special(pte)) + if (pte_ng(pte) && pte_exec(pte) && !pte_special(pte)) __sync_icache_dcache(pte, addr); } diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index ace0a96e7d6e..df2e53d3a969 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -37,7 +37,6 @@ #include <asm/ptrace.h> #include <asm/types.h> -#ifdef __KERNEL__ #define STACK_TOP_MAX TASK_SIZE_64 #ifdef CONFIG_COMPAT #define AARCH32_VECTORS_BASE 0xffff0000 @@ -49,7 +48,6 @@ extern phys_addr_t arm64_dma_phys_limit; #define ARCH_LOW_ADDRESS_LIMIT (arm64_dma_phys_limit - 1) -#endif /* __KERNEL__ */ struct debug_info { /* Have we suspended stepping by a debugger? */ diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h new file mode 100644 index 000000000000..4e7e7067afdb --- /dev/null +++ b/arch/arm64/include/asm/sections.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __ASM_SECTIONS_H +#define __ASM_SECTIONS_H + +#include <asm-generic/sections.h> + +extern char __alt_instructions[], __alt_instructions_end[]; +extern char __exception_text_start[], __exception_text_end[]; +extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[]; +extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; +extern char __hyp_text_start[], __hyp_text_end[]; +extern char __idmap_text_start[], __idmap_text_end[]; +extern char __irqentry_text_start[], __irqentry_text_end[]; +extern char __mmuoff_data_start[], __mmuoff_data_end[]; + +#endif /* __ASM_SECTIONS_H */ diff --git a/arch/arm64/include/asm/spinlock.h b/arch/arm64/include/asm/spinlock.h index 89206b568cd4..cae331d553f8 100644 --- a/arch/arm64/include/asm/spinlock.h +++ b/arch/arm64/include/asm/spinlock.h @@ -66,8 +66,7 @@ static inline void arch_spin_unlock_wait(arch_spinlock_t *lock) ARM64_LSE_ATOMIC_INSN( /* LL/SC */ " stxr %w1, %w0, %2\n" -" nop\n" -" nop\n", + __nops(2), /* LSE atomics */ " mov %w1, %w0\n" " cas %w0, %w0, %2\n" @@ -99,9 +98,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) /* LSE atomics */ " mov %w2, %w5\n" " ldadda %w2, %w0, %3\n" -" nop\n" -" nop\n" -" nop\n" + __nops(3) ) /* Did we get the lock? */ @@ -165,8 +162,8 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock) " stlrh %w1, %0", /* LSE atomics */ " mov %w1, #1\n" - " nop\n" - " staddlh %w1, %0") + " staddlh %w1, %0\n" + __nops(1)) : "=Q" (lock->owner), "=&r" (tmp) : : "memory"); @@ -212,7 +209,7 @@ static inline void arch_write_lock(arch_rwlock_t *rw) " cbnz %w0, 1b\n" " stxr %w0, %w2, %1\n" " cbnz %w0, 2b\n" - " nop", + __nops(1), /* LSE atomics */ "1: mov %w0, wzr\n" "2: casa %w0, %w2, %1\n" @@ -241,8 +238,7 @@ static inline int arch_write_trylock(arch_rwlock_t *rw) /* LSE atomics */ " mov %w0, wzr\n" " casa %w0, %w2, %1\n" - " nop\n" - " nop") + __nops(2)) : "=&r" (tmp), "+Q" (rw->lock) : "r" (0x80000000) : "memory"); @@ -290,8 +286,8 @@ static inline void arch_read_lock(arch_rwlock_t *rw) " add %w0, %w0, #1\n" " tbnz %w0, #31, 1b\n" " stxr %w1, %w0, %2\n" - " nop\n" - " cbnz %w1, 2b", + " cbnz %w1, 2b\n" + __nops(1), /* LSE atomics */ "1: wfe\n" "2: ldxr %w0, %2\n" @@ -317,9 +313,8 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) " cbnz %w1, 1b", /* LSE atomics */ " movn %w0, #0\n" - " nop\n" - " nop\n" - " staddl %w0, %2") + " staddl %w0, %2\n" + __nops(2)) : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock) : : "memory"); @@ -344,7 +339,7 @@ static inline int arch_read_trylock(arch_rwlock_t *rw) " tbnz %w1, #31, 1f\n" " casa %w0, %w1, %2\n" " sbc %w1, %w1, %w0\n" - " nop\n" + __nops(1) "1:") : "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock) : diff --git a/arch/arm64/include/asm/suspend.h b/arch/arm64/include/asm/suspend.h index 024d623f662e..b8a313fd7a09 100644 --- a/arch/arm64/include/asm/suspend.h +++ b/arch/arm64/include/asm/suspend.h @@ -47,4 +47,7 @@ int swsusp_arch_resume(void); int arch_hibernation_header_save(void *addr, unsigned int max_size); int arch_hibernation_header_restore(void *addr); +/* Used to resume on the CPU we hibernated on */ +int hibernate_resume_nonboot_cpu_disable(void); + #endif diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h index cc06794b7346..e8d46e8e6079 100644 --- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -100,6 +100,7 @@ /* SCTLR_EL1 specific flags. */ #define SCTLR_EL1_UCI (1 << 26) #define SCTLR_EL1_SPAN (1 << 23) +#define SCTLR_EL1_UCT (1 << 15) #define SCTLR_EL1_SED (1 << 8) #define SCTLR_EL1_CP15BEN (1 << 5) @@ -253,16 +254,6 @@ asm( " .endm\n" ); -static inline void config_sctlr_el1(u32 clear, u32 set) -{ - u32 val; - - asm volatile("mrs %0, sctlr_el1" : "=r" (val)); - val &= ~clear; - val |= set; - asm volatile("msr sctlr_el1, %0" : : "r" (val)); -} - /* * Unlike read_cpuid, calls to read_sysreg are never expected to be * optimized away or replaced with synthetic values. @@ -273,12 +264,41 @@ static inline void config_sctlr_el1(u32 clear, u32 set) __val; \ }) +/* + * The "Z" constraint normally means a zero immediate, but when combined with + * the "%x0" template means XZR. + */ #define write_sysreg(v, r) do { \ u64 __val = (u64)v; \ - asm volatile("msr " __stringify(r) ", %0" \ - : : "r" (__val)); \ + asm volatile("msr " __stringify(r) ", %x0" \ + : : "rZ" (__val)); \ +} while (0) + +/* + * For registers without architectural names, or simply unsupported by + * GAS. + */ +#define read_sysreg_s(r) ({ \ + u64 __val; \ + asm volatile("mrs_s %0, " __stringify(r) : "=r" (__val)); \ + __val; \ +}) + +#define write_sysreg_s(v, r) do { \ + u64 __val = (u64)v; \ + asm volatile("msr_s " __stringify(r) ", %0" : : "rZ" (__val)); \ } while (0) +static inline void config_sctlr_el1(u32 clear, u32 set) +{ + u32 val; + + val = read_sysreg(sctlr_el1); + val &= ~clear; + val |= set; + write_sysreg(val, sctlr_el1); +} + #endif #endif /* __ASM_SYSREG_H */ diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h index 57f110bea6a8..bc812435bc76 100644 --- a/arch/arm64/include/asm/system_misc.h +++ b/arch/arm64/include/asm/system_misc.h @@ -56,12 +56,6 @@ extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd); __show_ratelimited; \ }) -#define UDBG_UNDEFINED (1 << 0) -#define UDBG_SYSCALL (1 << 1) -#define UDBG_BADABORT (1 << 2) -#define UDBG_SEGV (1 << 3) -#define UDBG_BUS (1 << 4) - #endif /* __ASSEMBLY__ */ #endif /* __ASM_SYSTEM_MISC_H */ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index abd64bd1f6d9..e9ea5a6bd449 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -75,6 +75,9 @@ static inline struct thread_info *current_thread_info(void) __attribute_const__; /* * struct thread_info can be accessed directly via sp_el0. + * + * We don't use read_sysreg() as we want the compiler to cache the value where + * possible. */ static inline struct thread_info *current_thread_info(void) { diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h index b460ae28e346..deab52374119 100644 --- a/arch/arm64/include/asm/tlbflush.h +++ b/arch/arm64/include/asm/tlbflush.h @@ -25,6 +25,24 @@ #include <asm/cputype.h> /* + * Raw TLBI operations. + * + * Where necessary, use the __tlbi() macro to avoid asm() + * boilerplate. Drivers and most kernel code should use the TLB + * management routines in preference to the macro below. + * + * The macro can be used as __tlbi(op) or __tlbi(op, arg), depending + * on whether a particular TLBI operation takes an argument or + * not. The macros handles invoking the asm with or without the + * register argument as appropriate. + */ +#define __TLBI_0(op, arg) asm ("tlbi " #op) +#define __TLBI_1(op, arg) asm ("tlbi " #op ", %0" : : "r" (arg)) +#define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg) + +#define __tlbi(op, ...) __TLBI_N(op, ##__VA_ARGS__, 1, 0) + +/* * TLB Management * ============== * @@ -66,7 +84,7 @@ static inline void local_flush_tlb_all(void) { dsb(nshst); - asm("tlbi vmalle1"); + __tlbi(vmalle1); dsb(nsh); isb(); } @@ -74,7 +92,7 @@ static inline void local_flush_tlb_all(void) static inline void flush_tlb_all(void) { dsb(ishst); - asm("tlbi vmalle1is"); + __tlbi(vmalle1is); dsb(ish); isb(); } @@ -84,7 +102,7 @@ static inline void flush_tlb_mm(struct mm_struct *mm) unsigned long asid = ASID(mm) << 48; dsb(ishst); - asm("tlbi aside1is, %0" : : "r" (asid)); + __tlbi(aside1is, asid); dsb(ish); } @@ -94,7 +112,7 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48); dsb(ishst); - asm("tlbi vale1is, %0" : : "r" (addr)); + __tlbi(vale1is, addr); dsb(ish); } @@ -122,9 +140,9 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma, dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) { if (last_level) - asm("tlbi vale1is, %0" : : "r"(addr)); + __tlbi(vale1is, addr); else - asm("tlbi vae1is, %0" : : "r"(addr)); + __tlbi(vae1is, addr); } dsb(ish); } @@ -149,7 +167,7 @@ static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end dsb(ishst); for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) - asm("tlbi vaae1is, %0" : : "r"(addr)); + __tlbi(vaae1is, addr); dsb(ish); isb(); } @@ -163,7 +181,7 @@ static inline void __flush_tlb_pgtable(struct mm_struct *mm, { unsigned long addr = uaddr >> 12 | (ASID(mm) << 48); - asm("tlbi vae1is, %0" : : "r" (addr)); + __tlbi(vae1is, addr); dsb(ish); } diff --git a/arch/arm64/include/asm/traps.h b/arch/arm64/include/asm/traps.h index 9cd03f3e812f..02e9035b0685 100644 --- a/arch/arm64/include/asm/traps.h +++ b/arch/arm64/include/asm/traps.h @@ -19,6 +19,7 @@ #define __ASM_TRAP_H #include <linux/list.h> +#include <asm/sections.h> struct pt_regs; @@ -39,9 +40,6 @@ void arm64_notify_segfault(struct pt_regs *regs, unsigned long addr); #ifdef CONFIG_FUNCTION_GRAPH_TRACER static inline int __in_irqentry_text(unsigned long ptr) { - extern char __irqentry_text_start[]; - extern char __irqentry_text_end[]; - return ptr >= (unsigned long)&__irqentry_text_start && ptr < (unsigned long)&__irqentry_text_end; } @@ -54,8 +52,6 @@ static inline int __in_irqentry_text(unsigned long ptr) static inline int in_exception_text(unsigned long ptr) { - extern char __exception_text_start[]; - extern char __exception_text_end[]; int in; in = ptr >= (unsigned long)&__exception_text_start && diff --git a/arch/arm64/include/asm/virt.h b/arch/arm64/include/asm/virt.h index 1788545f25bc..fea10736b11f 100644 --- a/arch/arm64/include/asm/virt.h +++ b/arch/arm64/include/asm/virt.h @@ -45,6 +45,8 @@ #ifndef __ASSEMBLY__ #include <asm/ptrace.h> +#include <asm/sections.h> +#include <asm/sysreg.h> /* * __boot_cpu_mode records what mode CPUs were booted in. @@ -75,10 +77,7 @@ static inline bool is_hyp_mode_mismatched(void) static inline bool is_kernel_in_hyp_mode(void) { - u64 el; - - asm("mrs %0, CurrentEL" : "=r" (el)); - return el == CurrentEL_EL2; + return read_sysreg(CurrentEL) == CurrentEL_EL2; } #ifdef CONFIG_ARM64_VHE @@ -87,14 +86,6 @@ extern void verify_cpu_run_el(void); static inline void verify_cpu_run_el(void) {} #endif -/* The section containing the hypervisor idmap text */ -extern char __hyp_idmap_text_start[]; -extern char __hyp_idmap_text_end[]; - -/* The section containing the hypervisor text */ -extern char __hyp_text_start[]; -extern char __hyp_text_end[]; - #endif /* __ASSEMBLY__ */ #endif /* ! __ASM__VIRT_H */ diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 14f7b651c787..7d66bbaafc0c 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -10,6 +10,8 @@ CFLAGS_REMOVE_ftrace.o = -pg CFLAGS_REMOVE_insn.o = -pg CFLAGS_REMOVE_return_address.o = -pg +CFLAGS_setup.o = -DUTS_MACHINE='"$(UTS_MACHINE)"' + # Object file lists. arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \ entry-fpsimd.o process.o ptrace.o setup.o signal.o \ diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c index 3e4f1a45b125..252a6d9c1da5 100644 --- a/arch/arm64/kernel/acpi.c +++ b/arch/arm64/kernel/acpi.c @@ -24,6 +24,7 @@ #include <linux/memblock.h> #include <linux/of_fdt.h> #include <linux/smp.h> +#include <linux/serial_core.h> #include <asm/cputype.h> #include <asm/cpu_ops.h> @@ -206,7 +207,7 @@ void __init acpi_boot_table_init(void) if (param_acpi_off || (!param_acpi_on && !param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL))) - return; + goto done; /* * ACPI is disabled at this point. Enable it in order to parse @@ -226,6 +227,14 @@ void __init acpi_boot_table_init(void) if (!param_acpi_force) disable_acpi(); } + +done: + if (acpi_disabled) { + if (earlycon_init_is_deferred) + early_init_dt_scan_chosen_stdout(); + } else { + parse_spcr(earlycon_init_is_deferred); + } } #ifdef CONFIG_ACPI_APEI diff --git a/arch/arm64/kernel/acpi_numa.c b/arch/arm64/kernel/acpi_numa.c index f85149cc7c71..f01fab637dab 100644 --- a/arch/arm64/kernel/acpi_numa.c +++ b/arch/arm64/kernel/acpi_numa.c @@ -105,8 +105,10 @@ int __init arm64_acpi_numa_init(void) int ret; ret = acpi_numa_init(); - if (ret) + if (ret) { + pr_info("Failed to initialise from firmware\n"); return ret; + } return srat_disabled() ? -EINVAL : 0; } diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c index d2ee1b21a10d..06d650f61da7 100644 --- a/arch/arm64/kernel/alternative.c +++ b/arch/arm64/kernel/alternative.c @@ -25,14 +25,13 @@ #include <asm/alternative.h> #include <asm/cpufeature.h> #include <asm/insn.h> +#include <asm/sections.h> #include <linux/stop_machine.h> #define __ALT_PTR(a,f) (u32 *)((void *)&(a)->f + (a)->f) #define ALT_ORIG_PTR(a) __ALT_PTR(a, orig_offset) #define ALT_REPL_PTR(a) __ALT_PTR(a, alt_offset) -extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; - struct alt_region { struct alt_instr *begin; struct alt_instr *end; @@ -59,6 +58,8 @@ static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc) BUG(); } +#define align_down(x, a) ((unsigned long)(x) & ~(((unsigned long)(a)) - 1)) + static u32 get_alt_insn(struct alt_instr *alt, u32 *insnptr, u32 *altinsnptr) { u32 insn; @@ -80,6 +81,25 @@ static u32 get_alt_insn(struct alt_instr *alt, u32 *insnptr, u32 *altinsnptr) offset = target - (unsigned long)insnptr; insn = aarch64_set_branch_offset(insn, offset); } + } else if (aarch64_insn_is_adrp(insn)) { + s32 orig_offset, new_offset; + unsigned long target; + + /* + * If we're replacing an adrp instruction, which uses PC-relative + * immediate addressing, adjust the offset to reflect the new + * PC. adrp operates on 4K aligned addresses. + */ + orig_offset = aarch64_insn_adrp_get_offset(insn); + target = align_down(altinsnptr, SZ_4K) + orig_offset; + new_offset = target - align_down(insnptr, SZ_4K); + insn = aarch64_insn_adrp_set_offset(insn, new_offset); + } else if (aarch64_insn_uses_literal(insn)) { + /* + * Disallow patching unhandled instructions using PC relative + * literal addresses + */ + BUG(); } return insn; @@ -124,8 +144,8 @@ static int __apply_alternatives_multi_stop(void *unused) { static int patched = 0; struct alt_region region = { - .begin = __alt_instructions, - .end = __alt_instructions_end, + .begin = (struct alt_instr *)__alt_instructions, + .end = (struct alt_instr *)__alt_instructions_end, }; /* We always have a CPU 0 at this point (__init) */ diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c index 05070b72fc28..4a2f0f0fef32 100644 --- a/arch/arm64/kernel/asm-offsets.c +++ b/arch/arm64/kernel/asm-offsets.c @@ -23,6 +23,7 @@ #include <linux/dma-mapping.h> #include <linux/kvm_host.h> #include <linux/suspend.h> +#include <asm/cpufeature.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/smp_plat.h> @@ -145,5 +146,6 @@ int main(void) DEFINE(HIBERN_PBE_ORIG, offsetof(struct pbe, orig_address)); DEFINE(HIBERN_PBE_ADDR, offsetof(struct pbe, address)); DEFINE(HIBERN_PBE_NEXT, offsetof(struct pbe, next)); + DEFINE(ARM64_FTR_SYSVAL, offsetof(struct arm64_ftr_reg, sys_val)); return 0; } diff --git a/arch/arm64/kernel/cacheinfo.c b/arch/arm64/kernel/cacheinfo.c index b8629d52fba9..9617301f76b5 100644 --- a/arch/arm64/kernel/cacheinfo.c +++ b/arch/arm64/kernel/cacheinfo.c @@ -39,7 +39,7 @@ static inline enum cache_type get_cache_type(int level) if (level > MAX_CACHE_LEVEL) return CACHE_TYPE_NOCACHE; - asm volatile ("mrs %x0, clidr_el1" : "=r" (clidr)); + clidr = read_sysreg(clidr_el1); return CLIDR_CTYPE(clidr, level); } @@ -55,11 +55,9 @@ u64 __attribute_const__ cache_get_ccsidr(u64 csselr) WARN_ON(preemptible()); - /* Put value into CSSELR */ - asm volatile("msr csselr_el1, %x0" : : "r" (csselr)); + write_sysreg(csselr, csselr_el1); isb(); - /* Read result out of CCSIDR */ - asm volatile("mrs %x0, ccsidr_el1" : "=r" (ccsidr)); + ccsidr = read_sysreg(ccsidr_el1); return ccsidr; } diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 82b0fc2e637b..0150394f4cab 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -30,6 +30,21 @@ is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope) entry->midr_range_max); } +static bool +has_mismatched_cache_line_size(const struct arm64_cpu_capabilities *entry, + int scope) +{ + WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible()); + return (read_cpuid_cachetype() & arm64_ftr_reg_ctrel0.strict_mask) != + (arm64_ftr_reg_ctrel0.sys_val & arm64_ftr_reg_ctrel0.strict_mask); +} + +static void cpu_enable_trap_ctr_access(void *__unused) +{ + /* Clear SCTLR_EL1.UCT */ + config_sctlr_el1(SCTLR_EL1_UCT, 0); +} + #define MIDR_RANGE(model, min, max) \ .def_scope = SCOPE_LOCAL_CPU, \ .matches = is_affected_midr_range, \ @@ -108,6 +123,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { }, #endif { + .desc = "Mismatched cache line size", + .capability = ARM64_MISMATCHED_CACHE_LINE_SIZE, + .matches = has_mismatched_cache_line_size, + .def_scope = SCOPE_LOCAL_CPU, + .enable = cpu_enable_trap_ctr_access, + }, + { } }; @@ -116,7 +138,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = { * and the related information is freed soon after. If the new CPU requires * an errata not detected at boot, fail this CPU. */ -void verify_local_cpu_errata(void) +void verify_local_cpu_errata_workarounds(void) { const struct arm64_cpu_capabilities *caps = arm64_errata; @@ -131,7 +153,7 @@ void verify_local_cpu_errata(void) } } -void check_local_cpu_errata(void) +void update_cpu_errata_workarounds(void) { update_cpu_capabilities(arm64_errata, "enabling workaround for"); } diff --git a/arch/arm64/kernel/cpu_ops.c b/arch/arm64/kernel/cpu_ops.c index c7cfb8fe06f9..e137ceaf5016 100644 --- a/arch/arm64/kernel/cpu_ops.c +++ b/arch/arm64/kernel/cpu_ops.c @@ -17,6 +17,7 @@ */ #include <linux/acpi.h> +#include <linux/cache.h> #include <linux/errno.h> #include <linux/of.h> #include <linux/string.h> @@ -28,7 +29,7 @@ extern const struct cpu_operations smp_spin_table_ops; extern const struct cpu_operations acpi_parking_protocol_ops; extern const struct cpu_operations cpu_psci_ops; -const struct cpu_operations *cpu_ops[NR_CPUS]; +const struct cpu_operations *cpu_ops[NR_CPUS] __ro_after_init; static const struct cpu_operations *dt_supported_cpu_ops[] __initconst = { &smp_spin_table_ops, diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 62272eac1352..d577f263cc4a 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -46,6 +46,9 @@ unsigned int compat_elf_hwcap2 __read_mostly; DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS); +DEFINE_STATIC_KEY_ARRAY_FALSE(cpu_hwcap_keys, ARM64_NCAPS); +EXPORT_SYMBOL(cpu_hwcap_keys); + #define __ARM64_FTR_BITS(SIGNED, STRICT, TYPE, SHIFT, WIDTH, SAFE_VAL) \ { \ .sign = SIGNED, \ @@ -74,7 +77,7 @@ static bool __maybe_unused cpufeature_pan_not_uao(const struct arm64_cpu_capabilities *entry, int __unused); -static struct arm64_ftr_bits ftr_id_aa64isar0[] = { +static const struct arm64_ftr_bits ftr_id_aa64isar0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64ISAR0_RDM_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0), @@ -87,7 +90,7 @@ static struct arm64_ftr_bits ftr_id_aa64isar0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_aa64pfr0[] = { +static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64PFR0_GIC_SHIFT, 4, 0), @@ -101,7 +104,7 @@ static struct arm64_ftr_bits ftr_id_aa64pfr0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { +static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0), S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI), S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI), @@ -119,7 +122,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = { +static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_PAN_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR1_LOR_SHIFT, 4, 0), @@ -130,7 +133,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr1[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_aa64mmfr2[] = { +static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_LVA_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_IESB_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_AA64MMFR2_LSM_SHIFT, 4, 0), @@ -139,7 +142,7 @@ static struct arm64_ftr_bits ftr_id_aa64mmfr2[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_ctr[] = { +static const struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RAO */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 3, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_HIGHER_SAFE, 24, 4, 0), /* CWG */ @@ -147,15 +150,21 @@ static struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 1), /* DminLine */ /* * Linux can handle differing I-cache policies. Userspace JITs will - * make use of *minLine + * make use of *minLine. + * If we have differing I-cache policies, report it as the weakest - AIVIVT. */ - ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, 0), /* L1Ip */ + ARM64_FTR_BITS(FTR_NONSTRICT, FTR_EXACT, 14, 2, ICACHE_POLICY_AIVIVT), /* L1Ip */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 10, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* IminLine */ ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_mmfr0[] = { +struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = { + .name = "SYS_CTR_EL0", + .ftr_bits = ftr_ctr +}; + +static const struct arm64_ftr_bits ftr_id_mmfr0[] = { S_ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 28, 4, 0xf), /* InnerShr */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 24, 4, 0), /* FCSE */ ARM64_FTR_BITS(FTR_NONSTRICT, FTR_LOWER_SAFE, 20, 4, 0), /* AuxReg */ @@ -167,7 +176,7 @@ static struct arm64_ftr_bits ftr_id_mmfr0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_aa64dfr0[] = { +static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 32, 32, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0), @@ -178,14 +187,14 @@ static struct arm64_ftr_bits ftr_id_aa64dfr0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_mvfr2[] = { +static const struct arm64_ftr_bits ftr_mvfr2[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* FPMisc */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* SIMDMisc */ ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_dczid[] = { +static const struct arm64_ftr_bits ftr_dczid[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 5, 27, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 1, 1), /* DZP */ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0), /* BS */ @@ -193,7 +202,7 @@ static struct arm64_ftr_bits ftr_dczid[] = { }; -static struct arm64_ftr_bits ftr_id_isar5[] = { +static const struct arm64_ftr_bits ftr_id_isar5[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_RDM_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 20, 4, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, ID_ISAR5_CRC32_SHIFT, 4, 0), @@ -204,14 +213,14 @@ static struct arm64_ftr_bits ftr_id_isar5[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_mmfr4[] = { +static const struct arm64_ftr_bits ftr_id_mmfr4[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 24, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 4, 4, 0), /* ac2 */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 4, 0), /* RAZ */ ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_pfr0[] = { +static const struct arm64_ftr_bits ftr_id_pfr0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 16, 16, 0), /* RAZ */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 12, 4, 0), /* State3 */ ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 8, 4, 0), /* State2 */ @@ -220,7 +229,7 @@ static struct arm64_ftr_bits ftr_id_pfr0[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_id_dfr0[] = { +static const struct arm64_ftr_bits ftr_id_dfr0[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0), S_ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf), /* PerfMon */ ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), @@ -238,7 +247,7 @@ static struct arm64_ftr_bits ftr_id_dfr0[] = { * 0. Covers the following 32bit registers: * id_isar[0-4], id_mmfr[1-3], id_pfr1, mvfr[0-1] */ -static struct arm64_ftr_bits ftr_generic_32bits[] = { +static const struct arm64_ftr_bits ftr_generic_32bits[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0), ARM64_FTR_BITS(FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0), @@ -250,29 +259,32 @@ static struct arm64_ftr_bits ftr_generic_32bits[] = { ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_generic[] = { +static const struct arm64_ftr_bits ftr_generic[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0), ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_generic32[] = { +static const struct arm64_ftr_bits ftr_generic32[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 32, 0), ARM64_FTR_END, }; -static struct arm64_ftr_bits ftr_aa64raz[] = { +static const struct arm64_ftr_bits ftr_aa64raz[] = { ARM64_FTR_BITS(FTR_STRICT, FTR_EXACT, 0, 64, 0), ARM64_FTR_END, }; -#define ARM64_FTR_REG(id, table) \ - { \ - .sys_id = id, \ +#define ARM64_FTR_REG(id, table) { \ + .sys_id = id, \ + .reg = &(struct arm64_ftr_reg){ \ .name = #id, \ .ftr_bits = &((table)[0]), \ - } + }} -static struct arm64_ftr_reg arm64_ftr_regs[] = { +static const struct __ftr_reg_entry { + u32 sys_id; + struct arm64_ftr_reg *reg; +} arm64_ftr_regs[] = { /* Op1 = 0, CRn = 0, CRm = 1 */ ARM64_FTR_REG(SYS_ID_PFR0_EL1, ftr_id_pfr0), @@ -315,7 +327,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = { ARM64_FTR_REG(SYS_ID_AA64MMFR2_EL1, ftr_id_aa64mmfr2), /* Op1 = 3, CRn = 0, CRm = 0 */ - ARM64_FTR_REG(SYS_CTR_EL0, ftr_ctr), + { SYS_CTR_EL0, &arm64_ftr_reg_ctrel0 }, ARM64_FTR_REG(SYS_DCZID_EL0, ftr_dczid), /* Op1 = 3, CRn = 14, CRm = 0 */ @@ -324,7 +336,7 @@ static struct arm64_ftr_reg arm64_ftr_regs[] = { static int search_cmp_ftr_reg(const void *id, const void *regp) { - return (int)(unsigned long)id - (int)((const struct arm64_ftr_reg *)regp)->sys_id; + return (int)(unsigned long)id - (int)((const struct __ftr_reg_entry *)regp)->sys_id; } /* @@ -339,14 +351,20 @@ static int search_cmp_ftr_reg(const void *id, const void *regp) */ static struct arm64_ftr_reg *get_arm64_ftr_reg(u32 sys_id) { - return bsearch((const void *)(unsigned long)sys_id, + const struct __ftr_reg_entry *ret; + + ret = bsearch((const void *)(unsigned long)sys_id, arm64_ftr_regs, ARRAY_SIZE(arm64_ftr_regs), sizeof(arm64_ftr_regs[0]), search_cmp_ftr_reg); + if (ret) + return ret->reg; + return NULL; } -static u64 arm64_ftr_set_value(struct arm64_ftr_bits *ftrp, s64 reg, s64 ftr_val) +static u64 arm64_ftr_set_value(const struct arm64_ftr_bits *ftrp, s64 reg, + s64 ftr_val) { u64 mask = arm64_ftr_mask(ftrp); @@ -355,7 +373,8 @@ static u64 arm64_ftr_set_value(struct arm64_ftr_bits *ftrp, s64 reg, s64 ftr_val return reg; } -static s64 arm64_ftr_safe_value(struct arm64_ftr_bits *ftrp, s64 new, s64 cur) +static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new, + s64 cur) { s64 ret = 0; @@ -376,27 +395,13 @@ static s64 arm64_ftr_safe_value(struct arm64_ftr_bits *ftrp, s64 new, s64 cur) return ret; } -static int __init sort_cmp_ftr_regs(const void *a, const void *b) -{ - return ((const struct arm64_ftr_reg *)a)->sys_id - - ((const struct arm64_ftr_reg *)b)->sys_id; -} - -static void __init swap_ftr_regs(void *a, void *b, int size) -{ - struct arm64_ftr_reg tmp = *(struct arm64_ftr_reg *)a; - *(struct arm64_ftr_reg *)a = *(struct arm64_ftr_reg *)b; - *(struct arm64_ftr_reg *)b = tmp; -} - static void __init sort_ftr_regs(void) { - /* Keep the array sorted so that we can do the binary search */ - sort(arm64_ftr_regs, - ARRAY_SIZE(arm64_ftr_regs), - sizeof(arm64_ftr_regs[0]), - sort_cmp_ftr_regs, - swap_ftr_regs); + int i; + + /* Check that the array is sorted so that we can do the binary search */ + for (i = 1; i < ARRAY_SIZE(arm64_ftr_regs); i++) + BUG_ON(arm64_ftr_regs[i].sys_id < arm64_ftr_regs[i - 1].sys_id); } /* @@ -407,7 +412,7 @@ static void __init init_cpu_ftr_reg(u32 sys_reg, u64 new) { u64 val = 0; u64 strict_mask = ~0x0ULL; - struct arm64_ftr_bits *ftrp; + const struct arm64_ftr_bits *ftrp; struct arm64_ftr_reg *reg = get_arm64_ftr_reg(sys_reg); BUG_ON(!reg); @@ -464,7 +469,7 @@ void __init init_cpu_features(struct cpuinfo_arm64 *info) static void update_cpu_ftr_reg(struct arm64_ftr_reg *reg, u64 new) { - struct arm64_ftr_bits *ftrp; + const struct arm64_ftr_bits *ftrp; for (ftrp = reg->ftr_bits; ftrp->width; ftrp++) { s64 ftr_cur = arm64_ftr_value(ftrp, reg->sys_val); @@ -1004,23 +1009,33 @@ verify_local_cpu_features(const struct arm64_cpu_capabilities *caps) * cannot do anything to fix it up and could cause unexpected failures. So * we park the CPU. */ -void verify_local_cpu_capabilities(void) +static void verify_local_cpu_capabilities(void) { + verify_local_cpu_errata_workarounds(); + verify_local_cpu_features(arm64_features); + verify_local_elf_hwcaps(arm64_elf_hwcaps); + if (system_supports_32bit_el0()) + verify_local_elf_hwcaps(compat_elf_hwcaps); +} +void check_local_cpu_capabilities(void) +{ + /* + * All secondary CPUs should conform to the early CPU features + * in use by the kernel based on boot CPU. + */ check_early_cpu_features(); /* - * If we haven't computed the system capabilities, there is nothing - * to verify. + * If we haven't finalised the system capabilities, this CPU gets + * a chance to update the errata work arounds. + * Otherwise, this CPU should verify that it has all the system + * advertised capabilities. */ if (!sys_caps_initialised) - return; - - verify_local_cpu_errata(); - verify_local_cpu_features(arm64_features); - verify_local_elf_hwcaps(arm64_elf_hwcaps); - if (system_supports_32bit_el0()) - verify_local_elf_hwcaps(compat_elf_hwcaps); + update_cpu_errata_workarounds(); + else + verify_local_cpu_capabilities(); } static void __init setup_feature_capabilities(void) diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c index ed1b84fe6925..b3d5b3e8fbcb 100644 --- a/arch/arm64/kernel/cpuinfo.c +++ b/arch/arm64/kernel/cpuinfo.c @@ -363,8 +363,6 @@ static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info) } cpuinfo_detect_icache_policy(info); - - check_local_cpu_errata(); } void cpuinfo_store_cpu(void) diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index 91fff48d0f57..73ae90ef434c 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -46,16 +46,14 @@ static void mdscr_write(u32 mdscr) { unsigned long flags; local_dbg_save(flags); - asm volatile("msr mdscr_el1, %0" :: "r" (mdscr)); + write_sysreg(mdscr, mdscr_el1); local_dbg_restore(flags); } NOKPROBE_SYMBOL(mdscr_write); static u32 mdscr_read(void) { - u32 mdscr; - asm volatile("mrs %0, mdscr_el1" : "=r" (mdscr)); - return mdscr; + return read_sysreg(mdscr_el1); } NOKPROBE_SYMBOL(mdscr_read); @@ -132,36 +130,18 @@ NOKPROBE_SYMBOL(disable_debug_monitors); /* * OS lock clearing. */ -static void clear_os_lock(void *unused) +static int clear_os_lock(unsigned int cpu) { - asm volatile("msr oslar_el1, %0" : : "r" (0)); -} - -static int os_lock_notify(struct notifier_block *self, - unsigned long action, void *data) -{ - if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) - clear_os_lock(NULL); - return NOTIFY_OK; + write_sysreg(0, oslar_el1); + isb(); + return 0; } -static struct notifier_block os_lock_nb = { - .notifier_call = os_lock_notify, -}; - static int debug_monitors_init(void) { - cpu_notifier_register_begin(); - - /* Clear the OS lock. */ - on_each_cpu(clear_os_lock, NULL, 1); - isb(); - - /* Register hotplug handler. */ - __register_cpu_notifier(&os_lock_nb); - - cpu_notifier_register_done(); - return 0; + return cpuhp_setup_state(CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING, + "CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING", + clear_os_lock, NULL); } postcore_initcall(debug_monitors_init); @@ -254,7 +234,7 @@ static int single_step_handler(unsigned long addr, unsigned int esr, return 0; if (user_mode(regs)) { - send_user_sigtrap(TRAP_HWBKPT); + send_user_sigtrap(TRAP_TRACE); /* * ptrace will disable single step unless explicitly @@ -382,7 +362,7 @@ NOKPROBE_SYMBOL(aarch32_break_handler); static int __init debug_traps_init(void) { hook_debug_fault_code(DBG_ESR_EVT_HWSS, single_step_handler, SIGTRAP, - TRAP_HWBKPT, "single-step handler"); + TRAP_TRACE, "single-step handler"); hook_debug_fault_code(DBG_ESR_EVT_BRK, brk_handler, SIGTRAP, TRAP_BRKPT, "ptrace BRK handler"); return 0; @@ -435,8 +415,10 @@ NOKPROBE_SYMBOL(kernel_active_single_step); /* ptrace API */ void user_enable_single_step(struct task_struct *task) { - set_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP); - set_regs_spsr_ss(task_pt_regs(task)); + struct thread_info *ti = task_thread_info(task); + + if (!test_and_set_ti_thread_flag(ti, TIF_SINGLESTEP)) + set_regs_spsr_ss(task_pt_regs(task)); } NOKPROBE_SYMBOL(user_enable_single_step); diff --git a/arch/arm64/kernel/entry-ftrace.S b/arch/arm64/kernel/entry-ftrace.S index 0f03a8fe2314..aef02d2af3b5 100644 --- a/arch/arm64/kernel/entry-ftrace.S +++ b/arch/arm64/kernel/entry-ftrace.S @@ -219,7 +219,7 @@ ENDPROC(ftrace_graph_caller) * * Run ftrace_return_to_handler() before going back to parent. * @fp is checked against the value passed by ftrace_graph_caller() - * only when CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST is enabled. + * only when HAVE_FUNCTION_GRAPH_FP_TEST is enabled. */ ENTRY(return_to_handler) save_return_regs diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 441420ca7d08..223d54a4d66b 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -104,7 +104,7 @@ str x20, [sp, #S_ORIG_ADDR_LIMIT] mov x20, #TASK_SIZE_64 str x20, [tsk, #TI_ADDR_LIMIT] - ALTERNATIVE(nop, SET_PSTATE_UAO(0), ARM64_HAS_UAO, CONFIG_ARM64_UAO) + /* No need to reset PSTATE.UAO, hardware's already set it to 0 for us */ .endif /* \el == 0 */ mrs x22, elr_el1 mrs x23, spsr_el1 @@ -150,13 +150,7 @@ ldr x23, [sp, #S_SP] // load return stack pointer msr sp_el0, x23 #ifdef CONFIG_ARM64_ERRATUM_845719 -alternative_if_not ARM64_WORKAROUND_845719 - nop - nop -#ifdef CONFIG_PID_IN_CONTEXTIDR - nop -#endif -alternative_else +alternative_if ARM64_WORKAROUND_845719 tbz x22, #4, 1f #ifdef CONFIG_PID_IN_CONTEXTIDR mrs x29, contextidr_el1 @@ -165,7 +159,7 @@ alternative_else msr contextidr_el1, xzr #endif 1: -alternative_endif +alternative_else_nop_endif #endif .endif msr elr_el1, x21 // set up the return data @@ -707,18 +701,13 @@ ret_fast_syscall_trace: * Ok, we need to do extra processing, enter the slow path. */ work_pending: - tbnz x1, #TIF_NEED_RESCHED, work_resched - /* TIF_SIGPENDING, TIF_NOTIFY_RESUME or TIF_FOREIGN_FPSTATE case */ mov x0, sp // 'regs' - enable_irq // enable interrupts for do_notify_resume() bl do_notify_resume - b ret_to_user -work_resched: #ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off // the IRQs are off here, inform the tracing code + bl trace_hardirqs_on // enabled while in userspace #endif - bl schedule - + ldr x1, [tsk, #TI_FLAGS] // re-check for single-step + b finish_ret_to_user /* * "slow" syscall return path. */ @@ -727,6 +716,7 @@ ret_to_user: ldr x1, [tsk, #TI_FLAGS] and x2, x1, #_TIF_WORK_MASK cbnz x2, work_pending +finish_ret_to_user: enable_step_tsk x1, x2 kernel_exit 0 ENDPROC(ret_to_user) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 975b274ee7b5..394c61db5566 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -299,28 +299,16 @@ static inline void fpsimd_pm_init(void) { } #endif /* CONFIG_CPU_PM */ #ifdef CONFIG_HOTPLUG_CPU -static int fpsimd_cpu_hotplug_notifier(struct notifier_block *nfb, - unsigned long action, - void *hcpu) +static int fpsimd_cpu_dead(unsigned int cpu) { - unsigned int cpu = (long)hcpu; - - switch (action) { - case CPU_DEAD: - case CPU_DEAD_FROZEN: - per_cpu(fpsimd_last_state, cpu) = NULL; - break; - } - return NOTIFY_OK; + per_cpu(fpsimd_last_state, cpu) = NULL; + return 0; } -static struct notifier_block fpsimd_cpu_hotplug_notifier_block = { - .notifier_call = fpsimd_cpu_hotplug_notifier, -}; - static inline void fpsimd_hotplug_init(void) { - register_cpu_notifier(&fpsimd_cpu_hotplug_notifier_block); + cpuhp_setup_state_nocalls(CPUHP_ARM64_FPSIMD_DEAD, "arm64/fpsimd:dead", + NULL, fpsimd_cpu_dead); } #else diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c index ebecf9aa33d1..40ad08ac569a 100644 --- a/arch/arm64/kernel/ftrace.c +++ b/arch/arm64/kernel/ftrace.c @@ -138,7 +138,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, return; err = ftrace_push_return_trace(old, self_addr, &trace.depth, - frame_pointer); + frame_pointer, NULL); if (err == -EBUSY) return; else diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 3e7b050e99dc..427f6d3f084c 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -208,13 +208,23 @@ efi_header_end: __INIT + /* + * The following callee saved general purpose registers are used on the + * primary lowlevel boot path: + * + * Register Scope Purpose + * x21 stext() .. start_kernel() FDT pointer passed at boot in x0 + * x23 stext() .. start_kernel() physical misalignment/KASLR offset + * x28 __create_page_tables() callee preserved temp register + * x19/x20 __primary_switch() callee preserved temp registers + */ ENTRY(stext) bl preserve_boot_args - bl el2_setup // Drop to EL1, w20=cpu_boot_mode - adrp x24, __PHYS_OFFSET - and x23, x24, MIN_KIMG_ALIGN - 1 // KASLR offset, defaults to 0 + bl el2_setup // Drop to EL1, w0=cpu_boot_mode + adrp x23, __PHYS_OFFSET + and x23, x23, MIN_KIMG_ALIGN - 1 // KASLR offset, defaults to 0 bl set_cpu_boot_mode_flag - bl __create_page_tables // x25=TTBR0, x26=TTBR1 + bl __create_page_tables /* * The following calls CPU setup code, see arch/arm64/mm/proc.S for * details. @@ -222,9 +232,7 @@ ENTRY(stext) * the TCR will have been set. */ bl __cpu_setup // initialise processor - adr_l x27, __primary_switch // address to jump to after - // MMU has been enabled - b __enable_mmu + b __primary_switch ENDPROC(stext) /* @@ -311,23 +319,21 @@ ENDPROC(preserve_boot_args) * been enabled */ __create_page_tables: - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir mov x28, lr /* * Invalidate the idmap and swapper page tables to avoid potential * dirty cache lines being evicted. */ - mov x0, x25 - add x1, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x1, swapper_pg_dir + SWAPPER_DIR_SIZE bl __inval_cache_range /* * Clear the idmap and swapper page tables. */ - mov x0, x25 - add x6, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x6, swapper_pg_dir + SWAPPER_DIR_SIZE 1: stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 stp xzr, xzr, [x0], #16 @@ -340,7 +346,7 @@ __create_page_tables: /* * Create the identity mapping. */ - mov x0, x25 // idmap_pg_dir + adrp x0, idmap_pg_dir adrp x3, __idmap_text_start // __pa(__idmap_text_start) #ifndef CONFIG_ARM64_VA_BITS_48 @@ -390,7 +396,7 @@ __create_page_tables: /* * Map the kernel image (starting with PHYS_OFFSET). */ - mov x0, x26 // swapper_pg_dir + adrp x0, swapper_pg_dir mov_q x5, KIMAGE_VADDR + TEXT_OFFSET // compile time __va(_text) add x5, x5, x23 // add KASLR displacement create_pgd_entry x0, x5, x3, x6 @@ -405,8 +411,8 @@ __create_page_tables: * accesses (MMU disabled), invalidate the idmap and swapper page * tables again to remove any speculatively loaded cache lines. */ - mov x0, x25 - add x1, x26, #SWAPPER_DIR_SIZE + adrp x0, idmap_pg_dir + adrp x1, swapper_pg_dir + SWAPPER_DIR_SIZE dmb sy bl __inval_cache_range @@ -416,14 +422,27 @@ ENDPROC(__create_page_tables) /* * The following fragment of code is executed with the MMU enabled. + * + * x0 = __PHYS_OFFSET */ - .set initial_sp, init_thread_union + THREAD_START_SP __primary_switched: - mov x28, lr // preserve LR + adrp x4, init_thread_union + add sp, x4, #THREAD_SIZE + msr sp_el0, x4 // Save thread_info + adr_l x8, vectors // load VBAR_EL1 with virtual msr vbar_el1, x8 // vector table address isb + stp xzr, x30, [sp, #-16]! + mov x29, sp + + str_l x21, __fdt_pointer, x5 // Save FDT pointer + + ldr_l x4, kimage_vaddr // Save the offset between + sub x4, x4, x0 // the kernel virtual and + str_l x4, kimage_voffset, x5 // physical mappings + // Clear BSS adr_l x0, __bss_start mov x1, xzr @@ -432,17 +451,6 @@ __primary_switched: bl __pi_memset dsb ishst // Make zero page visible to PTW - adr_l sp, initial_sp, x4 - mov x4, sp - and x4, x4, #~(THREAD_SIZE - 1) - msr sp_el0, x4 // Save thread_info - str_l x21, __fdt_pointer, x5 // Save FDT pointer - - ldr_l x4, kimage_vaddr // Save the offset between - sub x4, x4, x24 // the kernel virtual and - str_l x4, kimage_voffset, x5 // physical mappings - - mov x29, #0 #ifdef CONFIG_KASAN bl kasan_early_init #endif @@ -454,8 +462,8 @@ __primary_switched: bl kaslr_early_init // parse FDT for KASLR options cbz x0, 0f // KASLR disabled? just proceed orr x23, x23, x0 // record KASLR offset - ret x28 // we must enable KASLR, return - // to __enable_mmu() + ldp x29, x30, [sp], #16 // we must enable KASLR, return + ret // to __primary_switch() 0: #endif b start_kernel @@ -465,7 +473,7 @@ ENDPROC(__primary_switched) * end early head section, begin head code that is also used for * hotplug and needs to have the same protections as the text region */ - .section ".text","ax" + .section ".idmap.text","ax" ENTRY(kimage_vaddr) .quad _text - TEXT_OFFSET @@ -490,7 +498,7 @@ CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 msr sctlr_el1, x0 - mov w20, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 + mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 isb ret @@ -586,7 +594,7 @@ CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems cbz x2, install_el2_stub - mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 + mov w0, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 isb ret @@ -601,7 +609,7 @@ install_el2_stub: PSR_MODE_EL1h) msr spsr_el2, x0 msr elr_el2, lr - mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 + mov w0, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2 eret ENDPROC(el2_setup) @@ -611,27 +619,39 @@ ENDPROC(el2_setup) */ set_cpu_boot_mode_flag: adr_l x1, __boot_cpu_mode - cmp w20, #BOOT_CPU_MODE_EL2 + cmp w0, #BOOT_CPU_MODE_EL2 b.ne 1f add x1, x1, #4 -1: str w20, [x1] // This CPU has booted in EL1 +1: str w0, [x1] // This CPU has booted in EL1 dmb sy dc ivac, x1 // Invalidate potentially stale cache line ret ENDPROC(set_cpu_boot_mode_flag) /* + * These values are written with the MMU off, but read with the MMU on. + * Writers will invalidate the corresponding address, discarding up to a + * 'Cache Writeback Granule' (CWG) worth of data. The linker script ensures + * sufficient alignment that the CWG doesn't overlap another section. + */ + .pushsection ".mmuoff.data.write", "aw" +/* * We need to find out the CPU boot mode long after boot, so we need to * store it in a writable variable. * * This is not in .bss, because we set it sufficiently early that the boot-time * zeroing of .bss would clobber it. */ - .pushsection .data..cacheline_aligned - .align L1_CACHE_SHIFT ENTRY(__boot_cpu_mode) .long BOOT_CPU_MODE_EL2 .long BOOT_CPU_MODE_EL1 +/* + * The booting CPU updates the failed status @__early_cpu_boot_status, + * with MMU turned off. + */ +ENTRY(__early_cpu_boot_status) + .long 0 + .popsection /* @@ -639,7 +659,7 @@ ENTRY(__boot_cpu_mode) * cores are held until we're ready for them to initialise. */ ENTRY(secondary_holding_pen) - bl el2_setup // Drop to EL1, w20=cpu_boot_mode + bl el2_setup // Drop to EL1, w0=cpu_boot_mode bl set_cpu_boot_mode_flag mrs x0, mpidr_el1 mov_q x1, MPIDR_HWID_BITMASK @@ -666,12 +686,10 @@ secondary_startup: /* * Common entry point for secondary CPUs. */ - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir bl __cpu_setup // initialise processor - - adr_l x27, __secondary_switch // address to jump to after enabling the MMU - b __enable_mmu + bl __enable_mmu + ldr x8, =__secondary_switched + br x8 ENDPROC(secondary_startup) __secondary_switched: @@ -706,33 +724,27 @@ ENDPROC(__secondary_switched) dc ivac, \tmp1 // Invalidate potentially stale cache line .endm - .pushsection .data..cacheline_aligned - .align L1_CACHE_SHIFT -ENTRY(__early_cpu_boot_status) - .long 0 - .popsection - /* * Enable the MMU. * * x0 = SCTLR_EL1 value for turning on the MMU. - * x27 = *virtual* address to jump to upon completion * - * Other registers depend on the function called upon completion. + * Returns to the caller via x30/lr. This requires the caller to be covered + * by the .idmap.text section. * * Checks if the selected granule size is supported by the CPU. * If it isn't, park the CPU */ - .section ".idmap.text", "ax" ENTRY(__enable_mmu) - mrs x22, sctlr_el1 // preserve old SCTLR_EL1 value mrs x1, ID_AA64MMFR0_EL1 ubfx x2, x1, #ID_AA64MMFR0_TGRAN_SHIFT, 4 cmp x2, #ID_AA64MMFR0_TGRAN_SUPPORTED b.ne __no_granule_support update_early_cpu_boot_status 0, x1, x2 - msr ttbr0_el1, x25 // load TTBR0 - msr ttbr1_el1, x26 // load TTBR1 + adrp x1, idmap_pg_dir + adrp x2, swapper_pg_dir + msr ttbr0_el1, x1 // load TTBR0 + msr ttbr1_el1, x2 // load TTBR1 isb msr sctlr_el1, x0 isb @@ -744,29 +756,7 @@ ENTRY(__enable_mmu) ic iallu dsb nsh isb -#ifdef CONFIG_RANDOMIZE_BASE - mov x19, x0 // preserve new SCTLR_EL1 value - blr x27 - - /* - * If we return here, we have a KASLR displacement in x23 which we need - * to take into account by discarding the current kernel mapping and - * creating a new one. - */ - msr sctlr_el1, x22 // disable the MMU - isb - bl __create_page_tables // recreate kernel mapping - - tlbi vmalle1 // Remove any stale TLB entries - dsb nsh - - msr sctlr_el1, x19 // re-enable the MMU - isb - ic iallu // flush instructions fetched - dsb nsh // via old mapping - isb -#endif - br x27 + ret ENDPROC(__enable_mmu) __no_granule_support: @@ -775,11 +765,11 @@ __no_granule_support: 1: wfe wfi - b 1b + b 1b ENDPROC(__no_granule_support) -__primary_switch: #ifdef CONFIG_RELOCATABLE +__relocate_kernel: /* * Iterate over each entry in the relocation table, and apply the * relocations in place. @@ -801,14 +791,46 @@ __primary_switch: add x13, x13, x23 // relocate str x13, [x11, x23] b 0b +1: ret +ENDPROC(__relocate_kernel) +#endif -1: +__primary_switch: +#ifdef CONFIG_RANDOMIZE_BASE + mov x19, x0 // preserve new SCTLR_EL1 value + mrs x20, sctlr_el1 // preserve old SCTLR_EL1 value #endif + + bl __enable_mmu +#ifdef CONFIG_RELOCATABLE + bl __relocate_kernel +#ifdef CONFIG_RANDOMIZE_BASE ldr x8, =__primary_switched - br x8 -ENDPROC(__primary_switch) + adrp x0, __PHYS_OFFSET + blr x8 -__secondary_switch: - ldr x8, =__secondary_switched + /* + * If we return here, we have a KASLR displacement in x23 which we need + * to take into account by discarding the current kernel mapping and + * creating a new one. + */ + msr sctlr_el1, x20 // disable the MMU + isb + bl __create_page_tables // recreate kernel mapping + + tlbi vmalle1 // Remove any stale TLB entries + dsb nsh + + msr sctlr_el1, x19 // re-enable the MMU + isb + ic iallu // flush instructions fetched + dsb nsh // via old mapping + isb + + bl __relocate_kernel +#endif +#endif + ldr x8, =__primary_switched + adrp x0, __PHYS_OFFSET br x8 -ENDPROC(__secondary_switch) +ENDPROC(__primary_switch) diff --git a/arch/arm64/kernel/hibernate-asm.S b/arch/arm64/kernel/hibernate-asm.S index 46f29b6560ec..e56d848b6466 100644 --- a/arch/arm64/kernel/hibernate-asm.S +++ b/arch/arm64/kernel/hibernate-asm.S @@ -36,8 +36,8 @@ .macro break_before_make_ttbr_switch zero_page, page_table msr ttbr1_el1, \zero_page isb - tlbi vmalle1is - dsb ish + tlbi vmalle1 + dsb nsh msr ttbr1_el1, \page_table isb .endm @@ -96,7 +96,7 @@ ENTRY(swsusp_arch_suspend_exit) add x1, x10, #PAGE_SIZE /* Clean the copied page to PoU - based on flush_icache_range() */ - dcache_line_size x2, x3 + raw_dcache_line_size x2, x3 sub x3, x2, #1 bic x4, x10, x3 2: dc cvau, x4 /* clean D line / unified line */ diff --git a/arch/arm64/kernel/hibernate.c b/arch/arm64/kernel/hibernate.c index 65d81f965e74..d55a7b09959b 100644 --- a/arch/arm64/kernel/hibernate.c +++ b/arch/arm64/kernel/hibernate.c @@ -15,9 +15,9 @@ * License terms: GNU General Public License (GPL) version 2 */ #define pr_fmt(x) "hibernate: " x +#include <linux/cpu.h> #include <linux/kvm_host.h> #include <linux/mm.h> -#include <linux/notifier.h> #include <linux/pm.h> #include <linux/sched.h> #include <linux/suspend.h> @@ -26,6 +26,7 @@ #include <asm/barrier.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #include <asm/irqflags.h> #include <asm/memory.h> #include <asm/mmu_context.h> @@ -34,6 +35,7 @@ #include <asm/pgtable-hwdef.h> #include <asm/sections.h> #include <asm/smp.h> +#include <asm/smp_plat.h> #include <asm/suspend.h> #include <asm/sysreg.h> #include <asm/virt.h> @@ -54,12 +56,6 @@ extern int in_suspend; /* Do we need to reset el2? */ #define el2_reset_needed() (is_hyp_mode_available() && !is_kernel_in_hyp_mode()) -/* - * Start/end of the hibernate exit code, this must be copied to a 'safe' - * location in memory, and executed from there. - */ -extern char __hibernate_exit_text_start[], __hibernate_exit_text_end[]; - /* temporary el2 vectors in the __hibernate_exit_text section. */ extern char hibernate_el2_vectors[]; @@ -67,6 +63,12 @@ extern char hibernate_el2_vectors[]; extern char __hyp_stub_vectors[]; /* + * The logical cpu number we should resume on, initialised to a non-cpu + * number. + */ +static int sleep_cpu = -EINVAL; + +/* * Values that may not change over hibernate/resume. We put the build number * and date in here so that we guarantee not to resume with a different * kernel. @@ -88,6 +90,8 @@ static struct arch_hibernate_hdr { * re-configure el2. */ phys_addr_t __hyp_stub_vectors; + + u64 sleep_cpu_mpidr; } resume_hdr; static inline void arch_hdr_invariants(struct arch_hibernate_hdr_invariants *i) @@ -130,12 +134,22 @@ int arch_hibernation_header_save(void *addr, unsigned int max_size) else hdr->__hyp_stub_vectors = 0; + /* Save the mpidr of the cpu we called cpu_suspend() on... */ + if (sleep_cpu < 0) { + pr_err("Failing to hibernate on an unkown CPU.\n"); + return -ENODEV; + } + hdr->sleep_cpu_mpidr = cpu_logical_map(sleep_cpu); + pr_info("Hibernating on CPU %d [mpidr:0x%llx]\n", sleep_cpu, + hdr->sleep_cpu_mpidr); + return 0; } EXPORT_SYMBOL(arch_hibernation_header_save); int arch_hibernation_header_restore(void *addr) { + int ret; struct arch_hibernate_hdr_invariants invariants; struct arch_hibernate_hdr *hdr = addr; @@ -145,6 +159,24 @@ int arch_hibernation_header_restore(void *addr) return -EINVAL; } + sleep_cpu = get_logical_index(hdr->sleep_cpu_mpidr); + pr_info("Hibernated on CPU %d [mpidr:0x%llx]\n", sleep_cpu, + hdr->sleep_cpu_mpidr); + if (sleep_cpu < 0) { + pr_crit("Hibernated on a CPU not known to this kernel!\n"); + sleep_cpu = -EINVAL; + return -EINVAL; + } + if (!cpu_online(sleep_cpu)) { + pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); + ret = cpu_up(sleep_cpu); + if (ret) { + pr_err("Failed to bring hibernate-CPU up!\n"); + sleep_cpu = -EINVAL; + return ret; + } + } + resume_hdr = *hdr; return 0; @@ -241,6 +273,7 @@ out: return rc; } +#define dcache_clean_range(start, end) __flush_dcache_area(start, (end - start)) int swsusp_arch_suspend(void) { @@ -256,10 +289,16 @@ int swsusp_arch_suspend(void) local_dbg_save(flags); if (__cpu_suspend_enter(&state)) { + sleep_cpu = smp_processor_id(); ret = swsusp_save(); } else { - /* Clean kernel to PoC for secondary core startup */ - __flush_dcache_area(LMADDR(KERNEL_START), KERNEL_END - KERNEL_START); + /* Clean kernel core startup/idle code to PoC*/ + dcache_clean_range(__mmuoff_data_start, __mmuoff_data_end); + dcache_clean_range(__idmap_text_start, __idmap_text_end); + + /* Clean kvm setup code to PoC? */ + if (el2_reset_needed()) + dcache_clean_range(__hyp_idmap_text_start, __hyp_idmap_text_end); /* * Tell the hibernation core that we've just restored @@ -267,6 +306,7 @@ int swsusp_arch_suspend(void) */ in_suspend = 0; + sleep_cpu = -EINVAL; __cpu_suspend_exit(); } @@ -275,6 +315,33 @@ int swsusp_arch_suspend(void) return ret; } +static void _copy_pte(pte_t *dst_pte, pte_t *src_pte, unsigned long addr) +{ + pte_t pte = *src_pte; + + if (pte_valid(pte)) { + /* + * Resume will overwrite areas that may be marked + * read only (code, rodata). Clear the RDONLY bit from + * the temporary mappings we use during restore. + */ + set_pte(dst_pte, pte_clear_rdonly(pte)); + } else if (debug_pagealloc_enabled() && !pte_none(pte)) { + /* + * debug_pagealloc will removed the PTE_VALID bit if + * the page isn't in use by the resume kernel. It may have + * been in use by the original kernel, in which case we need + * to put it back in our copy to do the restore. + * + * Before marking this entry valid, check the pfn should + * be mapped. + */ + BUG_ON(!pfn_valid(pte_pfn(pte))); + + set_pte(dst_pte, pte_mkpresent(pte_clear_rdonly(pte))); + } +} + static int copy_pte(pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long start, unsigned long end) { @@ -290,13 +357,7 @@ static int copy_pte(pmd_t *dst_pmd, pmd_t *src_pmd, unsigned long start, src_pte = pte_offset_kernel(src_pmd, start); do { - if (!pte_none(*src_pte)) - /* - * Resume will overwrite areas that may be marked - * read only (code, rodata). Clear the RDONLY bit from - * the temporary mappings we use during restore. - */ - set_pte(dst_pte, __pte(pte_val(*src_pte) & ~PTE_RDONLY)); + _copy_pte(dst_pte, src_pte, addr); } while (dst_pte++, src_pte++, addr += PAGE_SIZE, addr != end); return 0; @@ -483,27 +544,12 @@ out: return rc; } -static int check_boot_cpu_online_pm_callback(struct notifier_block *nb, - unsigned long action, void *ptr) +int hibernate_resume_nonboot_cpu_disable(void) { - if (action == PM_HIBERNATION_PREPARE && - cpumask_first(cpu_online_mask) != 0) { - pr_warn("CPU0 is offline.\n"); - return notifier_from_errno(-ENODEV); + if (sleep_cpu < 0) { + pr_err("Failing to resume from hibernate on an unkown CPU.\n"); + return -ENODEV; } - return NOTIFY_OK; -} - -static int __init check_boot_cpu_online_init(void) -{ - /* - * Set this pm_notifier callback with a lower priority than - * cpu_hotplug_pm_callback, so that cpu_hotplug_pm_callback will be - * called earlier to disable cpu hotplug before the cpu online check. - */ - pm_notifier(check_boot_cpu_online_pm_callback, -INT_MAX); - - return 0; + return freeze_secondary_cpus(sleep_cpu); } -core_initcall(check_boot_cpu_online_init); diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index 26a6bf77d272..948b73148d56 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -857,7 +857,7 @@ void hw_breakpoint_thread_switch(struct task_struct *next) /* * CPU initialisation. */ -static void hw_breakpoint_reset(void *unused) +static int hw_breakpoint_reset(unsigned int cpu) { int i; struct perf_event **slots; @@ -888,28 +888,14 @@ static void hw_breakpoint_reset(void *unused) write_wb_reg(AARCH64_DBG_REG_WVR, i, 0UL); } } -} -static int hw_breakpoint_reset_notify(struct notifier_block *self, - unsigned long action, - void *hcpu) -{ - if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE) { - local_irq_disable(); - hw_breakpoint_reset(NULL); - local_irq_enable(); - } - return NOTIFY_OK; + return 0; } -static struct notifier_block hw_breakpoint_reset_nb = { - .notifier_call = hw_breakpoint_reset_notify, -}; - #ifdef CONFIG_CPU_PM -extern void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)); +extern void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int)); #else -static inline void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) +static inline void cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int)) { } #endif @@ -919,36 +905,34 @@ static inline void cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) */ static int __init arch_hw_breakpoint_init(void) { + int ret; + core_num_brps = get_num_brps(); core_num_wrps = get_num_wrps(); pr_info("found %d breakpoint and %d watchpoint registers.\n", core_num_brps, core_num_wrps); - cpu_notifier_register_begin(); - - /* - * Reset the breakpoint resources. We assume that a halting - * debugger will leave the world in a nice state for us. - */ - smp_call_function(hw_breakpoint_reset, NULL, 1); - hw_breakpoint_reset(NULL); - /* Register debug fault handlers. */ hook_debug_fault_code(DBG_ESR_EVT_HWBP, breakpoint_handler, SIGTRAP, TRAP_HWBKPT, "hw-breakpoint handler"); hook_debug_fault_code(DBG_ESR_EVT_HWWP, watchpoint_handler, SIGTRAP, TRAP_HWBKPT, "hw-watchpoint handler"); - /* Register hotplug notifier. */ - __register_cpu_notifier(&hw_breakpoint_reset_nb); - - cpu_notifier_register_done(); + /* + * Reset the breakpoint resources. We assume that a halting + * debugger will leave the world in a nice state for us. + */ + ret = cpuhp_setup_state(CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING, + "CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING", + hw_breakpoint_reset, NULL); + if (ret) + pr_err("failed to register CPU hotplug notifier: %d\n", ret); /* Register cpu_suspend hw breakpoint restore hook */ cpu_suspend_set_dbg_restorer(hw_breakpoint_reset); - return 0; + return ret; } arch_initcall(arch_hw_breakpoint_init); diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c index 63f9432d05e8..6f2ac4fc66ca 100644 --- a/arch/arm64/kernel/insn.c +++ b/arch/arm64/kernel/insn.c @@ -96,7 +96,7 @@ static void __kprobes *patch_map(void *addr, int fixmap) if (module && IS_ENABLED(CONFIG_DEBUG_SET_MODULE_RONX)) page = vmalloc_to_page(addr); - else if (!module && IS_ENABLED(CONFIG_DEBUG_RODATA)) + else if (!module) page = pfn_to_page(PHYS_PFN(__pa(addr))); else return addr; @@ -1202,6 +1202,19 @@ u32 aarch64_set_branch_offset(u32 insn, s32 offset) BUG(); } +s32 aarch64_insn_adrp_get_offset(u32 insn) +{ + BUG_ON(!aarch64_insn_is_adrp(insn)); + return aarch64_insn_decode_immediate(AARCH64_INSN_IMM_ADR, insn) << 12; +} + +u32 aarch64_insn_adrp_set_offset(u32 insn, s32 offset) +{ + BUG_ON(!aarch64_insn_is_adrp(insn)); + return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_ADR, insn, + offset >> 12); +} + /* * Extract the Op/CR data from a msr/mrs instruction. */ diff --git a/arch/arm64/kernel/kaslr.c b/arch/arm64/kernel/kaslr.c index b05469173ba5..769f24ef628c 100644 --- a/arch/arm64/kernel/kaslr.c +++ b/arch/arm64/kernel/kaslr.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include <linux/cache.h> #include <linux/crc32.h> #include <linux/init.h> #include <linux/libfdt.h> @@ -20,7 +21,7 @@ #include <asm/pgtable.h> #include <asm/sections.h> -u64 __read_mostly module_alloc_base; +u64 __ro_after_init module_alloc_base; u16 __initdata memstart_offset_seed; static __init u64 get_kaslr_seed(void *fdt) diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index 8c57f6496e56..e017a9493b92 100644 --- a/arch/arm64/kernel/kgdb.c +++ b/arch/arm64/kernel/kgdb.c @@ -19,10 +19,13 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/bug.h> #include <linux/irq.h> #include <linux/kdebug.h> #include <linux/kgdb.h> #include <linux/kprobes.h> +#include <asm/debug-monitors.h> +#include <asm/insn.h> #include <asm/traps.h> struct dbg_reg_def_t dbg_reg_def[DBG_MAX_REG_NUM] = { @@ -338,15 +341,24 @@ void kgdb_arch_exit(void) unregister_die_notifier(&kgdb_notifier); } -/* - * ARM instructions are always in LE. - * Break instruction is encoded in LE format - */ -struct kgdb_arch arch_kgdb_ops = { - .gdb_bpt_instr = { - KGDB_DYN_BRK_INS_BYTE(0), - KGDB_DYN_BRK_INS_BYTE(1), - KGDB_DYN_BRK_INS_BYTE(2), - KGDB_DYN_BRK_INS_BYTE(3), - } -}; +struct kgdb_arch arch_kgdb_ops; + +int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt) +{ + int err; + + BUILD_BUG_ON(AARCH64_INSN_SIZE != BREAK_INSTR_SIZE); + + err = aarch64_insn_read((void *)bpt->bpt_addr, (u32 *)bpt->saved_instr); + if (err) + return err; + + return aarch64_insn_write((void *)bpt->bpt_addr, + (u32)AARCH64_BREAK_KGDB_DYN_DBG); +} + +int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt) +{ + return aarch64_insn_write((void *)bpt->bpt_addr, + *(u32 *)bpt->saved_instr); +} diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index 838ccf123307..a9310a69fffd 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -24,6 +24,7 @@ #include <asm/sysreg.h> #include <asm/virt.h> +#include <linux/acpi.h> #include <linux/of.h> #include <linux/perf/arm_pmu.h> #include <linux/platform_device.h> @@ -190,13 +191,23 @@ #define ARMV8_THUNDER_PERFCTR_L1I_CACHE_PREF_MISS 0xED /* PMUv3 HW events mapping. */ + +/* + * ARMv8 Architectural defined events, not all of these may + * be supported on any given implementation. Undefined events will + * be disabled at run-time. + */ static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = { PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV8_PMUV3_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_INST_RETIRED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV8_PMUV3_PERFCTR_L1D_CACHE, [PERF_COUNT_HW_CACHE_MISSES] = ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV8_PMUV3_PERFCTR_BR_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV8_PMUV3_PERFCTR_BUS_CYCLES, + [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV8_PMUV3_PERFCTR_STALL_FRONTEND, + [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV8_PMUV3_PERFCTR_STALL_BACKEND, }; /* ARM Cortex-A53 HW events mapping. */ @@ -258,6 +269,15 @@ static const unsigned armv8_pmuv3_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1D_CACHE, [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL, + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1I_CACHE, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL, + [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1D_TLB, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL, + [C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_L1I_TLB, + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_BR_PRED, [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV8_PMUV3_PERFCTR_BR_MIS_PRED, [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV8_PMUV3_PERFCTR_BR_PRED, @@ -523,12 +543,6 @@ static struct attribute_group armv8_pmuv3_format_attr_group = { .attrs = armv8_pmuv3_format_attrs, }; -static const struct attribute_group *armv8_pmuv3_attr_groups[] = { - &armv8_pmuv3_events_attr_group, - &armv8_pmuv3_format_attr_group, - NULL, -}; - /* * Perf Events' indices */ @@ -905,9 +919,22 @@ static void armv8pmu_reset(void *info) static int armv8_pmuv3_map_event(struct perf_event *event) { - return armpmu_map_event(event, &armv8_pmuv3_perf_map, - &armv8_pmuv3_perf_cache_map, - ARMV8_PMU_EVTYPE_EVENT); + int hw_event_id; + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + + hw_event_id = armpmu_map_event(event, &armv8_pmuv3_perf_map, + &armv8_pmuv3_perf_cache_map, + ARMV8_PMU_EVTYPE_EVENT); + if (hw_event_id < 0) + return hw_event_id; + + /* disable micro/arch events not supported by this PMU */ + if ((hw_event_id < ARMV8_PMUV3_MAX_COMMON_EVENTS) && + !test_bit(hw_event_id, armpmu->pmceid_bitmap)) { + return -EOPNOTSUPP; + } + + return hw_event_id; } static int armv8_a53_map_event(struct perf_event *event) @@ -985,7 +1012,10 @@ static int armv8_pmuv3_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_pmuv3"; cpu_pmu->map_event = armv8_pmuv3_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -994,7 +1024,10 @@ static int armv8_a53_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_cortex_a53"; cpu_pmu->map_event = armv8_a53_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -1003,7 +1036,10 @@ static int armv8_a57_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_cortex_a57"; cpu_pmu->map_event = armv8_a57_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -1012,7 +1048,10 @@ static int armv8_a72_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_cortex_a72"; cpu_pmu->map_event = armv8_a57_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -1021,7 +1060,10 @@ static int armv8_thunder_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_cavium_thunder"; cpu_pmu->map_event = armv8_thunder_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -1030,7 +1072,10 @@ static int armv8_vulcan_pmu_init(struct arm_pmu *cpu_pmu) armv8_pmu_init(cpu_pmu); cpu_pmu->name = "armv8_brcm_vulcan"; cpu_pmu->map_event = armv8_vulcan_map_event; - cpu_pmu->pmu.attr_groups = armv8_pmuv3_attr_groups; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_EVENTS] = + &armv8_pmuv3_events_attr_group; + cpu_pmu->attr_groups[ARMPMU_ATTR_GROUP_FORMATS] = + &armv8_pmuv3_format_attr_group; return armv8pmu_probe_pmu(cpu_pmu); } @@ -1044,21 +1089,32 @@ static const struct of_device_id armv8_pmu_of_device_ids[] = { {}, }; +/* + * Non DT systems have their micro/arch events probed at run-time. + * A fairly complete list of generic events are provided and ones that + * aren't supported by the current PMU are disabled. + */ +static const struct pmu_probe_info armv8_pmu_probe_table[] = { + PMU_PROBE(0, 0, armv8_pmuv3_init), /* enable all defined counters */ + { /* sentinel value */ } +}; + static int armv8_pmu_device_probe(struct platform_device *pdev) { - return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, NULL); + if (acpi_disabled) + return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, + NULL); + + return arm_pmu_device_probe(pdev, armv8_pmu_of_device_ids, + armv8_pmu_probe_table); } static struct platform_driver armv8_pmu_driver = { .driver = { - .name = "armv8-pmu", + .name = ARMV8_PMU_PDEV_NAME, .of_match_table = armv8_pmu_of_device_ids, }, .probe = armv8_pmu_device_probe, }; -static int __init register_armv8_pmu_driver(void) -{ - return platform_driver_register(&armv8_pmu_driver); -} -device_initcall(register_armv8_pmu_driver); +builtin_platform_driver(armv8_pmu_driver); diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c index 37e47a9d617e..d1731bf977ef 100644 --- a/arch/arm64/kernel/probes/decode-insn.c +++ b/arch/arm64/kernel/probes/decode-insn.c @@ -16,6 +16,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/module.h> +#include <linux/kallsyms.h> #include <asm/kprobes.h> #include <asm/insn.h> #include <asm/sections.h> @@ -122,7 +123,7 @@ arm_probe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) static bool __kprobes is_probed_address_atomic(kprobe_opcode_t *scan_start, kprobe_opcode_t *scan_end) { - while (scan_start > scan_end) { + while (scan_start >= scan_end) { /* * atomic region starts from exclusive load and ends with * exclusive store. @@ -142,33 +143,30 @@ arm_kprobe_decode_insn(kprobe_opcode_t *addr, struct arch_specific_insn *asi) { enum kprobe_insn decoded; kprobe_opcode_t insn = le32_to_cpu(*addr); - kprobe_opcode_t *scan_start = addr - 1; - kprobe_opcode_t *scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE; -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR) - struct module *mod; -#endif - - if (addr >= (kprobe_opcode_t *)_text && - scan_end < (kprobe_opcode_t *)_text) - scan_end = (kprobe_opcode_t *)_text; -#if defined(CONFIG_MODULES) && defined(MODULES_VADDR) - else { - preempt_disable(); - mod = __module_address((unsigned long)addr); - if (mod && within_module_init((unsigned long)addr, mod) && - !within_module_init((unsigned long)scan_end, mod)) - scan_end = (kprobe_opcode_t *)mod->init_layout.base; - else if (mod && within_module_core((unsigned long)addr, mod) && - !within_module_core((unsigned long)scan_end, mod)) - scan_end = (kprobe_opcode_t *)mod->core_layout.base; - preempt_enable(); + kprobe_opcode_t *scan_end = NULL; + unsigned long size = 0, offset = 0; + + /* + * If there's a symbol defined in front of and near enough to + * the probe address assume it is the entry point to this + * code and use it to further limit how far back we search + * when determining if we're in an atomic sequence. If we could + * not find any symbol skip the atomic test altogether as we + * could otherwise end up searching irrelevant text/literals. + * KPROBES depends on KALLSYMS so this last case should never + * happen. + */ + if (kallsyms_lookup_size_offset((unsigned long) addr, &size, &offset)) { + if (offset < (MAX_ATOMIC_CONTEXT_SIZE*sizeof(kprobe_opcode_t))) + scan_end = addr - (offset / sizeof(kprobe_opcode_t)); + else + scan_end = addr - MAX_ATOMIC_CONTEXT_SIZE; } -#endif decoded = arm_probe_decode_insn(insn, asi); - if (decoded == INSN_REJECTED || - is_probed_address_atomic(scan_start, scan_end)) - return INSN_REJECTED; + if (decoded != INSN_REJECTED && scan_end) + if (is_probed_address_atomic(addr - 1, scan_end)) + return INSN_REJECTED; return decoded; } diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index c6b0f40620d8..f5077ea7af6d 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -19,7 +19,7 @@ #include <linux/kasan.h> #include <linux/kernel.h> #include <linux/kprobes.h> -#include <linux/module.h> +#include <linux/extable.h> #include <linux/slab.h> #include <linux/stop_machine.h> #include <linux/stringify.h> @@ -31,7 +31,7 @@ #include <asm/insn.h> #include <asm/uaccess.h> #include <asm/irq.h> -#include <asm-generic/sections.h> +#include <asm/sections.h> #include "decode-insn.h" @@ -166,13 +166,18 @@ static void __kprobes set_current_kprobe(struct kprobe *p) } /* - * The D-flag (Debug mask) is set (masked) upon debug exception entry. - * Kprobes needs to clear (unmask) D-flag -ONLY- in case of recursive - * probe i.e. when probe hit from kprobe handler context upon - * executing the pre/post handlers. In this case we return with - * D-flag clear so that single-stepping can be carried-out. - * - * Leave D-flag set in all other cases. + * When PSTATE.D is set (masked), then software step exceptions can not be + * generated. + * SPSR's D bit shows the value of PSTATE.D immediately before the + * exception was taken. PSTATE.D is set while entering into any exception + * mode, however software clears it for any normal (none-debug-exception) + * mode in the exception entry. Therefore, when we are entering into kprobe + * breakpoint handler from any normal mode then SPSR.D bit is already + * cleared, however it is set when we are entering from any debug exception + * mode. + * Since we always need to generate single step exception after a kprobe + * breakpoint exception therefore we need to clear it unconditionally, when + * we become sure that the current breakpoint exception is for kprobe. */ static void __kprobes spsr_set_debug_flag(struct pt_regs *regs, int mask) @@ -245,10 +250,7 @@ static void __kprobes setup_singlestep(struct kprobe *p, set_ss_context(kcb, slot); /* mark pending ss */ - if (kcb->kprobe_status == KPROBE_REENTER) - spsr_set_debug_flag(regs, 0); - else - WARN_ON(regs->pstate & PSR_D_BIT); + spsr_set_debug_flag(regs, 0); /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); @@ -333,8 +335,6 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr) BUG(); kernel_disable_single_step(); - if (kcb->kprobe_status == KPROBE_REENTER) - spsr_set_debug_flag(regs, 1); if (kcb->kprobe_status == KPROBE_REENTER) restore_previous_kprobe(kcb); @@ -457,9 +457,6 @@ kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr) kprobes_restore_local_irqflag(kcb, regs); kernel_disable_single_step(); - if (kcb->kprobe_status == KPROBE_REENTER) - spsr_set_debug_flag(regs, 1); - post_kprobe_handler(kcb, regs); } @@ -543,9 +540,6 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) bool arch_within_kprobe_blacklist(unsigned long addr) { - extern char __idmap_text_start[], __idmap_text_end[]; - extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; - if ((addr >= (unsigned long)__kprobes_text_start && addr < (unsigned long)__kprobes_text_end) || (addr >= (unsigned long)__entry_text_start && diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6cd2612236dc..a4f5f766af08 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -202,7 +202,7 @@ void show_regs(struct pt_regs * regs) static void tls_thread_flush(void) { - asm ("msr tpidr_el0, xzr"); + write_sysreg(0, tpidr_el0); if (is_compat_task()) { current->thread.tp_value = 0; @@ -213,7 +213,7 @@ static void tls_thread_flush(void) * with a stale shadow state during context switch. */ barrier(); - asm ("msr tpidrro_el0, xzr"); + write_sysreg(0, tpidrro_el0); } } @@ -253,7 +253,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, * Read the current TLS pointer from tpidr_el0 as it may be * out-of-sync with the saved value. */ - asm("mrs %0, tpidr_el0" : "=r" (*task_user_tls(p))); + *task_user_tls(p) = read_sysreg(tpidr_el0); if (stack_start) { if (is_compat_thread(task_thread_info(p))) @@ -289,17 +289,15 @@ static void tls_thread_switch(struct task_struct *next) { unsigned long tpidr, tpidrro; - asm("mrs %0, tpidr_el0" : "=r" (tpidr)); + tpidr = read_sysreg(tpidr_el0); *task_user_tls(current) = tpidr; tpidr = *task_user_tls(next); tpidrro = is_compat_thread(task_thread_info(next)) ? next->thread.tp_value : 0; - asm( - " msr tpidr_el0, %0\n" - " msr tpidrro_el0, %1" - : : "r" (tpidr), "r" (tpidrro)); + write_sysreg(tpidr, tpidr_el0); + write_sysreg(tpidrro, tpidrro_el0); } /* Restore the UAO state depending on next's addr_limit */ diff --git a/arch/arm64/kernel/relocate_kernel.S b/arch/arm64/kernel/relocate_kernel.S index 51b73cdde287..ce704a4aeadd 100644 --- a/arch/arm64/kernel/relocate_kernel.S +++ b/arch/arm64/kernel/relocate_kernel.S @@ -34,7 +34,7 @@ ENTRY(arm64_relocate_new_kernel) /* Setup the list loop variables. */ mov x17, x1 /* x17 = kimage_start */ mov x16, x0 /* x16 = kimage_head */ - dcache_line_size x15, x0 /* x15 = dcache line size */ + raw_dcache_line_size x15, x0 /* x15 = dcache line size */ mov x14, xzr /* x14 = entry ptr */ mov x13, xzr /* x13 = copy dest */ diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 536dce22fe76..f534f492a268 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -206,10 +206,15 @@ static void __init request_standard_resources(void) for_each_memblock(memory, region) { res = alloc_bootmem_low(sizeof(*res)); - res->name = "System RAM"; + if (memblock_is_nomap(region)) { + res->name = "reserved"; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + } else { + res->name = "System RAM"; + res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; + } res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; - res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); @@ -228,7 +233,7 @@ void __init setup_arch(char **cmdline_p) { pr_info("Boot CPU: AArch64 Processor [%08x]\n", read_cpuid_id()); - sprintf(init_utsname()->machine, ELF_PLATFORM); + sprintf(init_utsname()->machine, UTS_MACHINE); init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c index a8eafdbc7cb8..404dd67080b9 100644 --- a/arch/arm64/kernel/signal.c +++ b/arch/arm64/kernel/signal.c @@ -402,15 +402,31 @@ static void do_signal(struct pt_regs *regs) asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int thread_flags) { - if (thread_flags & _TIF_SIGPENDING) - do_signal(regs); - - if (thread_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } - - if (thread_flags & _TIF_FOREIGN_FPSTATE) - fpsimd_restore_current_state(); + /* + * The assembly code enters us with IRQs off, but it hasn't + * informed the tracing code of that for efficiency reasons. + * Update the trace code with the current status. + */ + trace_hardirqs_off(); + do { + if (thread_flags & _TIF_NEED_RESCHED) { + schedule(); + } else { + local_irq_enable(); + + if (thread_flags & _TIF_SIGPENDING) + do_signal(regs); + + if (thread_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + + if (thread_flags & _TIF_FOREIGN_FPSTATE) + fpsimd_restore_current_state(); + } + local_irq_disable(); + thread_flags = READ_ONCE(current_thread_info()->flags); + } while (thread_flags & _TIF_WORK_MASK); } diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S index ccf79d849e0a..b8799e7c79de 100644 --- a/arch/arm64/kernel/sleep.S +++ b/arch/arm64/kernel/sleep.S @@ -73,10 +73,9 @@ ENTRY(__cpu_suspend_enter) str x2, [x0, #SLEEP_STACK_DATA_SYSTEM_REGS + CPU_CTX_SP] /* find the mpidr_hash */ - ldr x1, =sleep_save_stash - ldr x1, [x1] + ldr_l x1, sleep_save_stash mrs x7, mpidr_el1 - ldr x9, =mpidr_hash + adr_l x9, mpidr_hash ldr x10, [x9, #MPIDR_HASH_MASK] /* * Following code relies on the struct mpidr_hash @@ -95,36 +94,30 @@ ENTRY(__cpu_suspend_enter) mov x0, #1 ret ENDPROC(__cpu_suspend_enter) - .ltorg + .pushsection ".idmap.text", "ax" ENTRY(cpu_resume) bl el2_setup // if in EL2 drop to EL1 cleanly + bl __cpu_setup /* enable the MMU early - so we can access sleep_save_stash by va */ - adr_l lr, __enable_mmu /* __cpu_setup will return here */ - adr_l x27, _resume_switched /* __enable_mmu will branch here */ - adrp x25, idmap_pg_dir - adrp x26, swapper_pg_dir - b __cpu_setup -ENDPROC(cpu_resume) - - .pushsection ".idmap.text", "ax" -_resume_switched: + bl __enable_mmu ldr x8, =_cpu_resume br x8 -ENDPROC(_resume_switched) +ENDPROC(cpu_resume) .ltorg .popsection ENTRY(_cpu_resume) mrs x1, mpidr_el1 - adrp x8, mpidr_hash - add x8, x8, #:lo12:mpidr_hash // x8 = struct mpidr_hash phys address - /* retrieve mpidr_hash members to compute the hash */ + adr_l x8, mpidr_hash // x8 = struct mpidr_hash virt address + + /* retrieve mpidr_hash members to compute the hash */ ldr x2, [x8, #MPIDR_HASH_MASK] ldp w3, w4, [x8, #MPIDR_HASH_SHIFTS] ldp w5, w6, [x8, #(MPIDR_HASH_SHIFTS + 8)] compute_mpidr_hash x7, x3, x4, x5, x6, x1, x2 - /* x7 contains hash index, let's use it to grab context pointer */ + + /* x7 contains hash index, let's use it to grab context pointer */ ldr_l x0, sleep_save_stash ldr x0, [x0, x7, lsl #3] add x29, x0, #SLEEP_STACK_DATA_CALLEE_REGS diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index d93d43352504..d3f151cfd4a1 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -201,12 +201,6 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) return ret; } -static void smp_store_cpu_info(unsigned int cpuid) -{ - store_cpu_topology(cpuid); - numa_store_cpu_info(cpuid); -} - /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -239,7 +233,7 @@ asmlinkage void secondary_start_kernel(void) * this CPU ticks all of those. If it doesn't, the CPU will * fail to come online. */ - verify_local_cpu_capabilities(); + check_local_cpu_capabilities(); if (cpu_ops[cpu]->cpu_postboot) cpu_ops[cpu]->cpu_postboot(); @@ -254,7 +248,7 @@ asmlinkage void secondary_start_kernel(void) */ notify_cpu_starting(cpu); - smp_store_cpu_info(cpu); + store_cpu_topology(cpu); /* * OK, now it's safe to let the boot CPU continue. Wait for @@ -437,8 +431,19 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_prepare_boot_cpu(void) { set_my_cpu_offset(per_cpu_offset(smp_processor_id())); + /* + * Initialise the static keys early as they may be enabled by the + * cpufeature code. + */ + jump_label_init(); cpuinfo_store_boot_cpu(); save_boot_cpu_run_el(); + /* + * Run the errata work around checks on the boot CPU, once we have + * initialised the cpu feature infrastructure from + * cpuinfo_store_boot_cpu() above. + */ + update_cpu_errata_workarounds(); } static u64 __init of_get_cpu_mpidr(struct device_node *dn) @@ -619,6 +624,7 @@ static void __init of_parse_and_init_cpus(void) } bootcpu_valid = true; + early_map_cpu_to_node(0, of_node_to_nid(dn)); /* * cpu_logical_map has already been @@ -689,10 +695,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { int err; unsigned int cpu; + unsigned int this_cpu; init_cpu_topology(); - smp_store_cpu_info(smp_processor_id()); + this_cpu = smp_processor_id(); + store_cpu_topology(this_cpu); + numa_store_cpu_info(this_cpu); /* * If UP is mandated by "nosmp" (which implies "maxcpus=0"), don't set @@ -719,6 +728,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) continue; set_cpu_present(cpu, true); + numa_store_cpu_info(cpu); } } diff --git a/arch/arm64/kernel/smp_spin_table.c b/arch/arm64/kernel/smp_spin_table.c index 18a71bcd26ee..9a00eee9acc8 100644 --- a/arch/arm64/kernel/smp_spin_table.c +++ b/arch/arm64/kernel/smp_spin_table.c @@ -29,7 +29,8 @@ #include <asm/smp_plat.h> extern void secondary_holding_pen(void); -volatile unsigned long secondary_holding_pen_release = INVALID_HWID; +volatile unsigned long __section(".mmuoff.data.read") +secondary_holding_pen_release = INVALID_HWID; static phys_addr_t cpu_release_addr[NR_CPUS]; diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index d9751a4769e7..c2efddfca18c 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -43,6 +43,9 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) unsigned long fp = frame->fp; unsigned long irq_stack_ptr; + if (!tsk) + tsk = current; + /* * Switching between stacks is valid when tracing current and in * non-preemptible context. @@ -67,7 +70,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8)); #ifdef CONFIG_FUNCTION_GRAPH_TRACER - if (tsk && tsk->ret_stack && + if (tsk->ret_stack && (frame->pc == (unsigned long)return_to_handler)) { /* * This is a case where function graph tracer has @@ -152,6 +155,27 @@ static int save_trace(struct stackframe *frame, void *d) return trace->nr_entries >= trace->max_entries; } +void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) +{ + struct stack_trace_data data; + struct stackframe frame; + + data.trace = trace; + data.skip = trace->skip; + data.no_sched_functions = 0; + + frame.fp = regs->regs[29]; + frame.sp = regs->sp; + frame.pc = regs->pc; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + frame.graph = current->curr_ret_stack; +#endif + + walk_stackframe(current, &frame, save_trace, &data); + if (trace->nr_entries < trace->max_entries) + trace->entries[trace->nr_entries++] = ULONG_MAX; +} + void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) { struct stack_trace_data data; diff --git a/arch/arm64/kernel/suspend.c b/arch/arm64/kernel/suspend.c index b616e365cee3..ad734142070d 100644 --- a/arch/arm64/kernel/suspend.c +++ b/arch/arm64/kernel/suspend.c @@ -23,8 +23,8 @@ unsigned long *sleep_save_stash; * time the notifier runs debug exceptions might have been enabled already, * with HW breakpoints registers content still in an unknown state. */ -static void (*hw_breakpoint_restore)(void *); -void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) +static int (*hw_breakpoint_restore)(unsigned int); +void __init cpu_suspend_set_dbg_restorer(int (*hw_bp_restore)(unsigned int)) { /* Prevent multiple restore hook initializations */ if (WARN_ON(hw_breakpoint_restore)) @@ -34,6 +34,8 @@ void __init cpu_suspend_set_dbg_restorer(void (*hw_bp_restore)(void *)) void notrace __cpu_suspend_exit(void) { + unsigned int cpu = smp_processor_id(); + /* * We are resuming from reset with the idmap active in TTBR0_EL1. * We must uninstall the idmap and restore the expected MMU @@ -45,7 +47,7 @@ void notrace __cpu_suspend_exit(void) * Restore per-cpu offset before any kernel * subsystem relying on it has a chance to run. */ - set_my_cpu_offset(per_cpu_offset(smp_processor_id())); + set_my_cpu_offset(per_cpu_offset(cpu)); /* * Restore HW breakpoint registers to sane values @@ -53,7 +55,7 @@ void notrace __cpu_suspend_exit(void) * through local_dbg_restore. */ if (hw_breakpoint_restore) - hw_breakpoint_restore(NULL); + hw_breakpoint_restore(cpu); } /* diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c index 28c511b06edf..abaf582fc7a8 100644 --- a/arch/arm64/kernel/sys_compat.c +++ b/arch/arm64/kernel/sys_compat.c @@ -94,7 +94,7 @@ long compat_arm_syscall(struct pt_regs *regs) * See comment in tls_thread_flush. */ barrier(); - asm ("msr tpidrro_el0, %0" : : "r" (regs->regs[0])); + write_sysreg(regs->regs[0], tpidrro_el0); return 0; default: diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index e04f83873af7..5ff020f8fb7f 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -142,6 +142,11 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) unsigned long irq_stack_ptr; int skip; + pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); + + if (!tsk) + tsk = current; + /* * Switching between stacks is valid when tracing current and in * non-preemptible context. @@ -151,11 +156,6 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) else irq_stack_ptr = 0; - pr_debug("%s(regs = %p tsk = %p)\n", __func__, regs, tsk); - - if (!tsk) - tsk = current; - if (tsk == current) { frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_stack_pointer; @@ -447,36 +447,29 @@ void cpu_enable_cache_maint_trap(void *__unused) : "=r" (res) \ : "r" (address), "i" (-EFAULT) ) -asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) +static void user_cache_maint_handler(unsigned int esr, struct pt_regs *regs) { unsigned long address; - int ret; - - /* if this is a write with: Op0=1, Op2=1, Op1=3, CRn=7 */ - if ((esr & 0x01fffc01) == 0x0012dc00) { - int rt = (esr >> 5) & 0x1f; - int crm = (esr >> 1) & 0x0f; + int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + int crm = (esr & ESR_ELx_SYS64_ISS_CRM_MASK) >> ESR_ELx_SYS64_ISS_CRM_SHIFT; + int ret = 0; - address = (rt == 31) ? 0 : regs->regs[rt]; + address = (rt == 31) ? 0 : regs->regs[rt]; - switch (crm) { - case 11: /* DC CVAU, gets promoted */ - __user_cache_maint("dc civac", address, ret); - break; - case 10: /* DC CVAC, gets promoted */ - __user_cache_maint("dc civac", address, ret); - break; - case 14: /* DC CIVAC */ - __user_cache_maint("dc civac", address, ret); - break; - case 5: /* IC IVAU */ - __user_cache_maint("ic ivau", address, ret); - break; - default: - force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0); - return; - } - } else { + switch (crm) { + case ESR_ELx_SYS64_ISS_CRM_DC_CVAU: /* DC CVAU, gets promoted */ + __user_cache_maint("dc civac", address, ret); + break; + case ESR_ELx_SYS64_ISS_CRM_DC_CVAC: /* DC CVAC, gets promoted */ + __user_cache_maint("dc civac", address, ret); + break; + case ESR_ELx_SYS64_ISS_CRM_DC_CIVAC: /* DC CIVAC */ + __user_cache_maint("dc civac", address, ret); + break; + case ESR_ELx_SYS64_ISS_CRM_IC_IVAU: /* IC IVAU */ + __user_cache_maint("ic ivau", address, ret); + break; + default: force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0); return; } @@ -487,6 +480,48 @@ asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) regs->pc += 4; } +static void ctr_read_handler(unsigned int esr, struct pt_regs *regs) +{ + int rt = (esr & ESR_ELx_SYS64_ISS_RT_MASK) >> ESR_ELx_SYS64_ISS_RT_SHIFT; + + regs->regs[rt] = arm64_ftr_reg_ctrel0.sys_val; + regs->pc += 4; +} + +struct sys64_hook { + unsigned int esr_mask; + unsigned int esr_val; + void (*handler)(unsigned int esr, struct pt_regs *regs); +}; + +static struct sys64_hook sys64_hooks[] = { + { + .esr_mask = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_MASK, + .esr_val = ESR_ELx_SYS64_ISS_EL0_CACHE_OP_VAL, + .handler = user_cache_maint_handler, + }, + { + /* Trap read access to CTR_EL0 */ + .esr_mask = ESR_ELx_SYS64_ISS_SYS_OP_MASK, + .esr_val = ESR_ELx_SYS64_ISS_SYS_CTR_READ, + .handler = ctr_read_handler, + }, + {}, +}; + +asmlinkage void __exception do_sysinstr(unsigned int esr, struct pt_regs *regs) +{ + struct sys64_hook *hook; + + for (hook = sys64_hooks; hook->handler; hook++) + if ((hook->esr_mask & esr) == hook->esr_val) { + hook->handler(esr, regs); + return; + } + + force_signal_inject(SIGILL, ILL_ILLOPC, regs, 0); +} + long compat_arm_syscall(struct pt_regs *regs); asmlinkage long do_ni_syscall(struct pt_regs *regs) diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c index 076312b17d4f..a2c2478e7d78 100644 --- a/arch/arm64/kernel/vdso.c +++ b/arch/arm64/kernel/vdso.c @@ -18,12 +18,13 @@ * Author: Will Deacon <will.deacon@arm.com> */ -#include <linux/kernel.h> +#include <linux/cache.h> #include <linux/clocksource.h> #include <linux/elf.h> #include <linux/err.h> #include <linux/errno.h> #include <linux/gfp.h> +#include <linux/kernel.h> #include <linux/mm.h> #include <linux/sched.h> #include <linux/signal.h> @@ -37,8 +38,7 @@ #include <asm/vdso_datapage.h> extern char vdso_start, vdso_end; -static unsigned long vdso_pages; -static struct page **vdso_pagelist; +static unsigned long vdso_pages __ro_after_init; /* * The vDSO data page. @@ -53,9 +53,9 @@ struct vdso_data *vdso_data = &vdso_data_store.data; /* * Create and map the vectors page for AArch32 tasks. */ -static struct page *vectors_page[1]; +static struct page *vectors_page[1] __ro_after_init; -static int alloc_vectors_page(void) +static int __init alloc_vectors_page(void) { extern char __kuser_helper_start[], __kuser_helper_end[]; extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[]; @@ -88,7 +88,7 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp) { struct mm_struct *mm = current->mm; unsigned long addr = AARCH32_VECTORS_BASE; - static struct vm_special_mapping spec = { + static const struct vm_special_mapping spec = { .name = "[vectors]", .pages = vectors_page, @@ -110,11 +110,19 @@ int aarch32_setup_vectors_page(struct linux_binprm *bprm, int uses_interp) } #endif /* CONFIG_COMPAT */ -static struct vm_special_mapping vdso_spec[2]; +static struct vm_special_mapping vdso_spec[2] __ro_after_init = { + { + .name = "[vvar]", + }, + { + .name = "[vdso]", + }, +}; static int __init vdso_init(void) { int i; + struct page **vdso_pagelist; if (memcmp(&vdso_start, "\177ELF", 4)) { pr_err("vDSO is not a valid ELF object!\n"); @@ -138,16 +146,8 @@ static int __init vdso_init(void) for (i = 0; i < vdso_pages; i++) vdso_pagelist[i + 1] = pfn_to_page(PHYS_PFN(__pa(&vdso_start)) + i); - /* Populate the special mapping structures */ - vdso_spec[0] = (struct vm_special_mapping) { - .name = "[vvar]", - .pages = vdso_pagelist, - }; - - vdso_spec[1] = (struct vm_special_mapping) { - .name = "[vdso]", - .pages = &vdso_pagelist[1], - }; + vdso_spec[0].pages = &vdso_pagelist[0]; + vdso_spec[1].pages = &vdso_pagelist[1]; return 0; } @@ -201,7 +201,7 @@ up_fail: */ void update_vsyscall(struct timekeeper *tk) { - u32 use_syscall = strcmp(tk->tkr_mono.clock->name, "arch_sys_counter"); + u32 use_syscall = !tk->tkr_mono.clock->archdata.vdso_direct; ++vdso_data->tb_seq_count; smp_wmb(); diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S index 659963d40bb4..1105aab1e6d6 100644 --- a/arch/arm64/kernel/vmlinux.lds.S +++ b/arch/arm64/kernel/vmlinux.lds.S @@ -122,6 +122,7 @@ SECTIONS ENTRY_TEXT TEXT_TEXT SCHED_TEXT + CPUIDLE_TEXT LOCK_TEXT KPROBES_TEXT HYPERVISOR_TEXT @@ -185,6 +186,25 @@ SECTIONS _data = .; _sdata = .; RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) + + /* + * Data written with the MMU off but read with the MMU on requires + * cache lines to be invalidated, discarding up to a Cache Writeback + * Granule (CWG) of data from the cache. Keep the section that + * requires this type of maintenance to be in its own Cache Writeback + * Granule (CWG) area so the cache maintenance operations don't + * interfere with adjacent data. + */ + .mmuoff.data.write : ALIGN(SZ_2K) { + __mmuoff_data_start = .; + *(.mmuoff.data.write) + } + . = ALIGN(SZ_2K); + .mmuoff.data.read : { + *(.mmuoff.data.read) + __mmuoff_data_end = .; + } + PECOFF_EDATA_PADDING _edata = .; diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig index 9c9edc98d271..6eaf12c1d627 100644 --- a/arch/arm64/kvm/Kconfig +++ b/arch/arm64/kvm/Kconfig @@ -16,7 +16,7 @@ menuconfig VIRTUALIZATION if VIRTUALIZATION -config KVM_ARM_VGIC_V3 +config KVM_ARM_VGIC_V3_ITS bool config KVM @@ -34,7 +34,7 @@ config KVM select KVM_VFIO select HAVE_KVM_EVENTFD select HAVE_KVM_IRQFD - select KVM_ARM_VGIC_V3 + select KVM_ARM_VGIC_V3_ITS select KVM_ARM_PMU if HW_PERF_EVENTS select HAVE_KVM_MSI select HAVE_KVM_IRQCHIP diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile index 695eb3c7ef41..d50a82a16ff6 100644 --- a/arch/arm64/kvm/Makefile +++ b/arch/arm64/kvm/Makefile @@ -16,9 +16,10 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/e kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/arm.o $(ARM)/mmu.o $(ARM)/mmio.o kvm-$(CONFIG_KVM_ARM_HOST) += $(ARM)/psci.o $(ARM)/perf.o -kvm-$(CONFIG_KVM_ARM_HOST) += emulate.o inject_fault.o regmap.o +kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generic_v8.o +kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/aarch32.o kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic.o kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/vgic/vgic-init.o diff --git a/arch/arm64/kvm/emulate.c b/arch/arm64/kvm/emulate.c deleted file mode 100644 index f87d8fbaa48d..000000000000 --- a/arch/arm64/kvm/emulate.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (not much of an) Emulation layer for 32bit guests. - * - * Copyright (C) 2012,2013 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * based on arch/arm/kvm/emulate.c - * Copyright (C) 2012 - Virtual Open Systems and Columbia University - * Author: Christoffer Dall <c.dall@virtualopensystems.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/kvm_host.h> -#include <asm/esr.h> -#include <asm/kvm_emulate.h> - -/* - * stolen from arch/arm/kernel/opcodes.c - * - * condition code lookup table - * index into the table is test code: EQ, NE, ... LT, GT, AL, NV - * - * bit position in short is condition code: NZCV - */ -static const unsigned short cc_map[16] = { - 0xF0F0, /* EQ == Z set */ - 0x0F0F, /* NE */ - 0xCCCC, /* CS == C set */ - 0x3333, /* CC */ - 0xFF00, /* MI == N set */ - 0x00FF, /* PL */ - 0xAAAA, /* VS == V set */ - 0x5555, /* VC */ - 0x0C0C, /* HI == C set && Z clear */ - 0xF3F3, /* LS == C clear || Z set */ - 0xAA55, /* GE == (N==V) */ - 0x55AA, /* LT == (N!=V) */ - 0x0A05, /* GT == (!Z && (N==V)) */ - 0xF5FA, /* LE == (Z || (N!=V)) */ - 0xFFFF, /* AL always */ - 0 /* NV */ -}; - -static int kvm_vcpu_get_condition(const struct kvm_vcpu *vcpu) -{ - u32 esr = kvm_vcpu_get_hsr(vcpu); - - if (esr & ESR_ELx_CV) - return (esr & ESR_ELx_COND_MASK) >> ESR_ELx_COND_SHIFT; - - return -1; -} - -/* - * Check if a trapped instruction should have been executed or not. - */ -bool kvm_condition_valid32(const struct kvm_vcpu *vcpu) -{ - unsigned long cpsr; - u32 cpsr_cond; - int cond; - - /* Top two bits non-zero? Unconditional. */ - if (kvm_vcpu_get_hsr(vcpu) >> 30) - return true; - - /* Is condition field valid? */ - cond = kvm_vcpu_get_condition(vcpu); - if (cond == 0xE) - return true; - - cpsr = *vcpu_cpsr(vcpu); - - if (cond < 0) { - /* This can happen in Thumb mode: examine IT state. */ - unsigned long it; - - it = ((cpsr >> 8) & 0xFC) | ((cpsr >> 25) & 0x3); - - /* it == 0 => unconditional. */ - if (it == 0) - return true; - - /* The cond for this insn works out as the top 4 bits. */ - cond = (it >> 4); - } - - cpsr_cond = cpsr >> 28; - - if (!((cc_map[cond] >> cpsr_cond) & 1)) - return false; - - return true; -} - -/** - * adjust_itstate - adjust ITSTATE when emulating instructions in IT-block - * @vcpu: The VCPU pointer - * - * When exceptions occur while instructions are executed in Thumb IF-THEN - * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have - * to do this little bit of work manually. The fields map like this: - * - * IT[7:0] -> CPSR[26:25],CPSR[15:10] - */ -static void kvm_adjust_itstate(struct kvm_vcpu *vcpu) -{ - unsigned long itbits, cond; - unsigned long cpsr = *vcpu_cpsr(vcpu); - bool is_arm = !(cpsr & COMPAT_PSR_T_BIT); - - BUG_ON(is_arm && (cpsr & COMPAT_PSR_IT_MASK)); - - if (!(cpsr & COMPAT_PSR_IT_MASK)) - return; - - cond = (cpsr & 0xe000) >> 13; - itbits = (cpsr & 0x1c00) >> (10 - 2); - itbits |= (cpsr & (0x3 << 25)) >> 25; - - /* Perform ITAdvance (see page A2-52 in ARM DDI 0406C) */ - if ((itbits & 0x7) == 0) - itbits = cond = 0; - else - itbits = (itbits << 1) & 0x1f; - - cpsr &= ~COMPAT_PSR_IT_MASK; - cpsr |= cond << 13; - cpsr |= (itbits & 0x1c) << (10 - 2); - cpsr |= (itbits & 0x3) << 25; - *vcpu_cpsr(vcpu) = cpsr; -} - -/** - * kvm_skip_instr - skip a trapped instruction and proceed to the next - * @vcpu: The vcpu pointer - */ -void kvm_skip_instr32(struct kvm_vcpu *vcpu, bool is_wide_instr) -{ - bool is_thumb; - - is_thumb = !!(*vcpu_cpsr(vcpu) & COMPAT_PSR_T_BIT); - if (is_thumb && !is_wide_instr) - *vcpu_pc(vcpu) += 2; - else - *vcpu_pc(vcpu) += 4; - kvm_adjust_itstate(vcpu); -} diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index fa96fe2bd469..a204adf29f0a 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -170,9 +170,32 @@ int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, { exit_handle_fn exit_handler; + if (ARM_SERROR_PENDING(exception_index)) { + u8 hsr_ec = ESR_ELx_EC(kvm_vcpu_get_hsr(vcpu)); + + /* + * HVC/SMC already have an adjusted PC, which we need + * to correct in order to return to after having + * injected the SError. + */ + if (hsr_ec == ESR_ELx_EC_HVC32 || hsr_ec == ESR_ELx_EC_HVC64 || + hsr_ec == ESR_ELx_EC_SMC32 || hsr_ec == ESR_ELx_EC_SMC64) { + u32 adj = kvm_vcpu_trap_il_is32bit(vcpu) ? 4 : 2; + *vcpu_pc(vcpu) -= adj; + } + + kvm_inject_vabt(vcpu); + return 1; + } + + exception_index = ARM_EXCEPTION_CODE(exception_index); + switch (exception_index) { case ARM_EXCEPTION_IRQ: return 1; + case ARM_EXCEPTION_EL1_SERROR: + kvm_inject_vabt(vcpu); + return 1; case ARM_EXCEPTION_TRAP: /* * See ARM ARM B1.14.1: "Hyp traps on instructions diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S index 7ce931565151..2726635dceba 100644 --- a/arch/arm64/kvm/hyp.S +++ b/arch/arm64/kvm/hyp.S @@ -46,10 +46,6 @@ alternative_if_not ARM64_HAS_VIRT_HOST_EXTN hvc #0 ldr lr, [sp], #16 ret -alternative_else +alternative_else_nop_endif b __vhe_hyp_call - nop - nop - nop -alternative_endif ENDPROC(__kvm_call_hyp) diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile index 0c85febcc1eb..aaf42ae8d8c3 100644 --- a/arch/arm64/kvm/hyp/Makefile +++ b/arch/arm64/kvm/hyp/Makefile @@ -5,9 +5,9 @@ KVM=../../../../virt/kvm obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v2-sr.o +obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/vgic-v3-sr.o obj-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/hyp/timer-sr.o -obj-$(CONFIG_KVM_ARM_HOST) += vgic-v3-sr.o obj-$(CONFIG_KVM_ARM_HOST) += sysreg-sr.o obj-$(CONFIG_KVM_ARM_HOST) += debug-sr.o obj-$(CONFIG_KVM_ARM_HOST) += entry.o diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c index 33342a776ec7..4ba5c9095d03 100644 --- a/arch/arm64/kvm/hyp/debug-sr.c +++ b/arch/arm64/kvm/hyp/debug-sr.c @@ -131,9 +131,7 @@ void __hyp_text __debug_cond_restore_host_state(struct kvm_vcpu *vcpu) vcpu->arch.debug_flags &= ~KVM_ARM64_DEBUG_DIRTY; } -static u32 __hyp_text __debug_read_mdcr_el2(void) +u32 __hyp_text __kvm_get_mdcr_el2(void) { return read_sysreg(mdcr_el2); } - -__alias(__debug_read_mdcr_el2) u32 __kvm_get_mdcr_el2(void); diff --git a/arch/arm64/kvm/hyp/entry.S b/arch/arm64/kvm/hyp/entry.S index ce9e5e5f28cf..12ee62d6d410 100644 --- a/arch/arm64/kvm/hyp/entry.S +++ b/arch/arm64/kvm/hyp/entry.S @@ -55,79 +55,111 @@ */ ENTRY(__guest_enter) // x0: vcpu - // x1: host/guest context - // x2-x18: clobbered by macros + // x1: host context + // x2-x17: clobbered by macros + // x18: guest context // Store the host regs save_callee_saved_regs x1 - // Preserve vcpu & host_ctxt for use at exit time - stp x0, x1, [sp, #-16]! + // Store the host_ctxt for use at exit time + str x1, [sp, #-16]! - add x1, x0, #VCPU_CONTEXT + add x18, x0, #VCPU_CONTEXT - // Prepare x0-x1 for later restore by pushing them onto the stack - ldp x2, x3, [x1, #CPU_XREG_OFFSET(0)] - stp x2, x3, [sp, #-16]! + // Restore guest regs x0-x17 + ldp x0, x1, [x18, #CPU_XREG_OFFSET(0)] + ldp x2, x3, [x18, #CPU_XREG_OFFSET(2)] + ldp x4, x5, [x18, #CPU_XREG_OFFSET(4)] + ldp x6, x7, [x18, #CPU_XREG_OFFSET(6)] + ldp x8, x9, [x18, #CPU_XREG_OFFSET(8)] + ldp x10, x11, [x18, #CPU_XREG_OFFSET(10)] + ldp x12, x13, [x18, #CPU_XREG_OFFSET(12)] + ldp x14, x15, [x18, #CPU_XREG_OFFSET(14)] + ldp x16, x17, [x18, #CPU_XREG_OFFSET(16)] - // x2-x18 - ldp x2, x3, [x1, #CPU_XREG_OFFSET(2)] - ldp x4, x5, [x1, #CPU_XREG_OFFSET(4)] - ldp x6, x7, [x1, #CPU_XREG_OFFSET(6)] - ldp x8, x9, [x1, #CPU_XREG_OFFSET(8)] - ldp x10, x11, [x1, #CPU_XREG_OFFSET(10)] - ldp x12, x13, [x1, #CPU_XREG_OFFSET(12)] - ldp x14, x15, [x1, #CPU_XREG_OFFSET(14)] - ldp x16, x17, [x1, #CPU_XREG_OFFSET(16)] - ldr x18, [x1, #CPU_XREG_OFFSET(18)] - - // x19-x29, lr - restore_callee_saved_regs x1 - - // Last bits of the 64bit state - ldp x0, x1, [sp], #16 + // Restore guest regs x19-x29, lr + restore_callee_saved_regs x18 + + // Restore guest reg x18 + ldr x18, [x18, #CPU_XREG_OFFSET(18)] // Do not touch any register after this! eret ENDPROC(__guest_enter) ENTRY(__guest_exit) - // x0: vcpu - // x1: return code - // x2-x3: free - // x4-x29,lr: vcpu regs - // vcpu x0-x3 on the stack + // x0: return code + // x1: vcpu + // x2-x29,lr: vcpu regs + // vcpu x0-x1 on the stack - add x2, x0, #VCPU_CONTEXT + add x1, x1, #VCPU_CONTEXT - stp x4, x5, [x2, #CPU_XREG_OFFSET(4)] - stp x6, x7, [x2, #CPU_XREG_OFFSET(6)] - stp x8, x9, [x2, #CPU_XREG_OFFSET(8)] - stp x10, x11, [x2, #CPU_XREG_OFFSET(10)] - stp x12, x13, [x2, #CPU_XREG_OFFSET(12)] - stp x14, x15, [x2, #CPU_XREG_OFFSET(14)] - stp x16, x17, [x2, #CPU_XREG_OFFSET(16)] - str x18, [x2, #CPU_XREG_OFFSET(18)] + ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN) - ldp x6, x7, [sp], #16 // x2, x3 - ldp x4, x5, [sp], #16 // x0, x1 + // Store the guest regs x2 and x3 + stp x2, x3, [x1, #CPU_XREG_OFFSET(2)] - stp x4, x5, [x2, #CPU_XREG_OFFSET(0)] - stp x6, x7, [x2, #CPU_XREG_OFFSET(2)] + // Retrieve the guest regs x0-x1 from the stack + ldp x2, x3, [sp], #16 // x0, x1 + + // Store the guest regs x0-x1 and x4-x18 + stp x2, x3, [x1, #CPU_XREG_OFFSET(0)] + stp x4, x5, [x1, #CPU_XREG_OFFSET(4)] + stp x6, x7, [x1, #CPU_XREG_OFFSET(6)] + stp x8, x9, [x1, #CPU_XREG_OFFSET(8)] + stp x10, x11, [x1, #CPU_XREG_OFFSET(10)] + stp x12, x13, [x1, #CPU_XREG_OFFSET(12)] + stp x14, x15, [x1, #CPU_XREG_OFFSET(14)] + stp x16, x17, [x1, #CPU_XREG_OFFSET(16)] + str x18, [x1, #CPU_XREG_OFFSET(18)] + + // Store the guest regs x19-x29, lr + save_callee_saved_regs x1 - save_callee_saved_regs x2 + // Restore the host_ctxt from the stack + ldr x2, [sp], #16 - // Restore vcpu & host_ctxt from the stack - // (preserving return code in x1) - ldp x0, x2, [sp], #16 // Now restore the host regs restore_callee_saved_regs x2 - mov x0, x1 - ret + // If we have a pending asynchronous abort, now is the + // time to find out. From your VAXorcist book, page 666: + // "Threaten me not, oh Evil one! For I speak with + // the power of DEC, and I command thee to show thyself!" + mrs x2, elr_el2 + mrs x3, esr_el2 + mrs x4, spsr_el2 + mov x5, x0 + + dsb sy // Synchronize against in-flight ld/st + msr daifclr, #4 // Unmask aborts + + // This is our single instruction exception window. A pending + // SError is guaranteed to occur at the earliest when we unmask + // it, and at the latest just after the ISB. + .global abort_guest_exit_start +abort_guest_exit_start: + + isb + + .global abort_guest_exit_end +abort_guest_exit_end: + + // If the exception took place, restore the EL1 exception + // context so that we can report some information. + // Merge the exception code with the SError pending bit. + tbz x0, #ARM_EXIT_WITH_SERROR_BIT, 1f + msr elr_el2, x2 + msr esr_el2, x3 + msr spsr_el2, x4 + orr x0, x0, x5 +1: ret ENDPROC(__guest_exit) ENTRY(__fpsimd_guest_restore) + stp x2, x3, [sp, #-16]! stp x4, lr, [sp, #-16]! alternative_if_not ARM64_HAS_VIRT_HOST_EXTN diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S index f6d9694ae3b1..4e92399f7105 100644 --- a/arch/arm64/kvm/hyp/hyp-entry.S +++ b/arch/arm64/kvm/hyp/hyp-entry.S @@ -27,16 +27,6 @@ .text .pushsection .hyp.text, "ax" -.macro save_x0_to_x3 - stp x0, x1, [sp, #-16]! - stp x2, x3, [sp, #-16]! -.endm - -.macro restore_x0_to_x3 - ldp x2, x3, [sp], #16 - ldp x0, x1, [sp], #16 -.endm - .macro do_el2_call /* * Shuffle the parameters before calling the function @@ -79,23 +69,23 @@ ENTRY(__kvm_hyp_teardown) ENDPROC(__kvm_hyp_teardown) el1_sync: // Guest trapped into EL2 - save_x0_to_x3 + stp x0, x1, [sp, #-16]! alternative_if_not ARM64_HAS_VIRT_HOST_EXTN mrs x1, esr_el2 alternative_else mrs x1, esr_el1 alternative_endif - lsr x2, x1, #ESR_ELx_EC_SHIFT + lsr x0, x1, #ESR_ELx_EC_SHIFT - cmp x2, #ESR_ELx_EC_HVC64 + cmp x0, #ESR_ELx_EC_HVC64 b.ne el1_trap - mrs x3, vttbr_el2 // If vttbr is valid, the 64bit guest - cbnz x3, el1_trap // called HVC + mrs x1, vttbr_el2 // If vttbr is valid, the 64bit guest + cbnz x1, el1_trap // called HVC /* Here, we're pretty sure the host called HVC. */ - restore_x0_to_x3 + ldp x0, x1, [sp], #16 cmp x0, #HVC_GET_VECTORS b.ne 1f @@ -113,24 +103,51 @@ alternative_endif el1_trap: /* - * x1: ESR - * x2: ESR_EC + * x0: ESR_EC */ /* Guest accessed VFP/SIMD registers, save host, restore Guest */ - cmp x2, #ESR_ELx_EC_FP_ASIMD + cmp x0, #ESR_ELx_EC_FP_ASIMD b.eq __fpsimd_guest_restore - mrs x0, tpidr_el2 - mov x1, #ARM_EXCEPTION_TRAP + mrs x1, tpidr_el2 + mov x0, #ARM_EXCEPTION_TRAP b __guest_exit el1_irq: - save_x0_to_x3 - mrs x0, tpidr_el2 - mov x1, #ARM_EXCEPTION_IRQ + stp x0, x1, [sp, #-16]! + mrs x1, tpidr_el2 + mov x0, #ARM_EXCEPTION_IRQ + b __guest_exit + +el1_error: + stp x0, x1, [sp, #-16]! + mrs x1, tpidr_el2 + mov x0, #ARM_EXCEPTION_EL1_SERROR b __guest_exit +el2_error: + /* + * Only two possibilities: + * 1) Either we come from the exit path, having just unmasked + * PSTATE.A: change the return code to an EL2 fault, and + * carry on, as we're already in a sane state to handle it. + * 2) Or we come from anywhere else, and that's a bug: we panic. + * + * For (1), x0 contains the original return code and x1 doesn't + * contain anything meaningful at that stage. We can reuse them + * as temp registers. + * For (2), who cares? + */ + mrs x0, elr_el2 + adr x1, abort_guest_exit_start + cmp x0, x1 + adr x1, abort_guest_exit_end + ccmp x0, x1, #4, ne + b.ne __hyp_panic + mov x0, #(1 << ARM_EXIT_WITH_SERROR_BIT) + eret + ENTRY(__hyp_do_panic) mov lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ PSR_MODE_EL1h) @@ -155,11 +172,9 @@ ENDPROC(\label) invalid_vector el2h_sync_invalid invalid_vector el2h_irq_invalid invalid_vector el2h_fiq_invalid - invalid_vector el2h_error_invalid invalid_vector el1_sync_invalid invalid_vector el1_irq_invalid invalid_vector el1_fiq_invalid - invalid_vector el1_error_invalid .ltorg @@ -174,15 +189,15 @@ ENTRY(__kvm_hyp_vector) ventry el2h_sync_invalid // Synchronous EL2h ventry el2h_irq_invalid // IRQ EL2h ventry el2h_fiq_invalid // FIQ EL2h - ventry el2h_error_invalid // Error EL2h + ventry el2_error // Error EL2h ventry el1_sync // Synchronous 64-bit EL1 ventry el1_irq // IRQ 64-bit EL1 ventry el1_fiq_invalid // FIQ 64-bit EL1 - ventry el1_error_invalid // Error 64-bit EL1 + ventry el1_error // Error 64-bit EL1 ventry el1_sync // Synchronous 32-bit EL1 ventry el1_irq // IRQ 32-bit EL1 ventry el1_fiq_invalid // FIQ 32-bit EL1 - ventry el1_error_invalid // Error 32-bit EL1 + ventry el1_error // Error 32-bit EL1 ENDPROC(__kvm_hyp_vector) diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c index 5a84b4562603..83037cd62d01 100644 --- a/arch/arm64/kvm/hyp/switch.c +++ b/arch/arm64/kvm/hyp/switch.c @@ -16,7 +16,10 @@ */ #include <linux/types.h> +#include <linux/jump_label.h> + #include <asm/kvm_asm.h> +#include <asm/kvm_emulate.h> #include <asm/kvm_hyp.h> static bool __hyp_text __fpsimd_enabled_nvhe(void) @@ -109,6 +112,15 @@ static hyp_alternate_select(__deactivate_traps_arch, static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu) { + /* + * If we pended a virtual abort, preserve it until it gets + * cleared. See D1.14.3 (Virtual Interrupts) for details, but + * the crucial bit is "On taking a vSError interrupt, + * HCR_EL2.VSE is cleared to 0." + */ + if (vcpu->arch.hcr_el2 & HCR_VSE) + vcpu->arch.hcr_el2 = read_sysreg(hcr_el2); + __deactivate_traps_arch()(); write_sysreg(0, hstr_el2); write_sysreg(read_sysreg(mdcr_el2) & MDCR_EL2_HPMN_MASK, mdcr_el2); @@ -126,17 +138,13 @@ static void __hyp_text __deactivate_vm(struct kvm_vcpu *vcpu) write_sysreg(0, vttbr_el2); } -static hyp_alternate_select(__vgic_call_save_state, - __vgic_v2_save_state, __vgic_v3_save_state, - ARM64_HAS_SYSREG_GIC_CPUIF); - -static hyp_alternate_select(__vgic_call_restore_state, - __vgic_v2_restore_state, __vgic_v3_restore_state, - ARM64_HAS_SYSREG_GIC_CPUIF); - static void __hyp_text __vgic_save_state(struct kvm_vcpu *vcpu) { - __vgic_call_save_state()(vcpu); + if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) + __vgic_v3_save_state(vcpu); + else + __vgic_v2_save_state(vcpu); + write_sysreg(read_sysreg(hcr_el2) & ~HCR_INT_OVERRIDE, hcr_el2); } @@ -149,7 +157,10 @@ static void __hyp_text __vgic_restore_state(struct kvm_vcpu *vcpu) val |= vcpu->arch.irq_lines; write_sysreg(val, hcr_el2); - __vgic_call_restore_state()(vcpu); + if (static_branch_unlikely(&kvm_vgic_global_state.gicv3_cpuif)) + __vgic_v3_restore_state(vcpu); + else + __vgic_v2_restore_state(vcpu); } static bool __hyp_text __true_value(void) @@ -232,7 +243,22 @@ static bool __hyp_text __populate_fault_info(struct kvm_vcpu *vcpu) return true; } -static int __hyp_text __guest_run(struct kvm_vcpu *vcpu) +static void __hyp_text __skip_instr(struct kvm_vcpu *vcpu) +{ + *vcpu_pc(vcpu) = read_sysreg_el2(elr); + + if (vcpu_mode_is_32bit(vcpu)) { + vcpu->arch.ctxt.gp_regs.regs.pstate = read_sysreg_el2(spsr); + kvm_skip_instr32(vcpu, kvm_vcpu_trap_il_is32bit(vcpu)); + write_sysreg_el2(vcpu->arch.ctxt.gp_regs.regs.pstate, spsr); + } else { + *vcpu_pc(vcpu) += 4; + } + + write_sysreg_el2(*vcpu_pc(vcpu), elr); +} + +int __hyp_text __kvm_vcpu_run(struct kvm_vcpu *vcpu) { struct kvm_cpu_context *host_ctxt; struct kvm_cpu_context *guest_ctxt; @@ -267,9 +293,43 @@ again: exit_code = __guest_enter(vcpu, host_ctxt); /* And we're baaack! */ + /* + * We're using the raw exception code in order to only process + * the trap if no SError is pending. We will come back to the + * same PC once the SError has been injected, and replay the + * trapping instruction. + */ if (exit_code == ARM_EXCEPTION_TRAP && !__populate_fault_info(vcpu)) goto again; + if (static_branch_unlikely(&vgic_v2_cpuif_trap) && + exit_code == ARM_EXCEPTION_TRAP) { + bool valid; + + valid = kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_DABT_LOW && + kvm_vcpu_trap_get_fault_type(vcpu) == FSC_FAULT && + kvm_vcpu_dabt_isvalid(vcpu) && + !kvm_vcpu_dabt_isextabt(vcpu) && + !kvm_vcpu_dabt_iss1tw(vcpu); + + if (valid) { + int ret = __vgic_v2_perform_cpuif_access(vcpu); + + if (ret == 1) { + __skip_instr(vcpu); + goto again; + } + + if (ret == -1) { + /* Promote an illegal access to an SError */ + __skip_instr(vcpu); + exit_code = ARM_EXCEPTION_EL1_SERROR; + } + + /* 0 falls through to be handler out of EL2 */ + } + } + fp_enabled = __fpsimd_enabled(); __sysreg_save_guest_state(guest_ctxt); @@ -293,8 +353,6 @@ again: return exit_code; } -__alias(__guest_run) int __kvm_vcpu_run(struct kvm_vcpu *vcpu); - static const char __hyp_panic_string[] = "HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%p\n"; static void __hyp_text __hyp_call_panic_nvhe(u64 spsr, u64 elr, u64 par) diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index be8177cdd3bf..9cc0ea784ae6 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -17,7 +17,7 @@ #include <asm/kvm_hyp.h> -static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) +void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { dsb(ishst); @@ -48,10 +48,7 @@ static void __hyp_text __tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) write_sysreg(0, vttbr_el2); } -__alias(__tlb_flush_vmid_ipa) void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, - phys_addr_t ipa); - -static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) +void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) { dsb(ishst); @@ -67,14 +64,10 @@ static void __hyp_text __tlb_flush_vmid(struct kvm *kvm) write_sysreg(0, vttbr_el2); } -__alias(__tlb_flush_vmid) void __kvm_tlb_flush_vmid(struct kvm *kvm); - -static void __hyp_text __tlb_flush_vm_context(void) +void __hyp_text __kvm_flush_vm_context(void) { dsb(ishst); asm volatile("tlbi alle1is \n" "ic ialluis ": : ); dsb(ish); } - -__alias(__tlb_flush_vm_context) void __kvm_flush_vm_context(void); diff --git a/arch/arm64/kvm/hyp/vgic-v3-sr.c b/arch/arm64/kvm/hyp/vgic-v3-sr.c deleted file mode 100644 index 5f8f80b4a224..000000000000 --- a/arch/arm64/kvm/hyp/vgic-v3-sr.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * Copyright (C) 2012-2015 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/compiler.h> -#include <linux/irqchip/arm-gic-v3.h> -#include <linux/kvm_host.h> - -#include <asm/kvm_hyp.h> - -#define vtr_to_max_lr_idx(v) ((v) & 0xf) -#define vtr_to_nr_pri_bits(v) (((u32)(v) >> 29) + 1) - -#define read_gicreg(r) \ - ({ \ - u64 reg; \ - asm volatile("mrs_s %0, " __stringify(r) : "=r" (reg)); \ - reg; \ - }) - -#define write_gicreg(v,r) \ - do { \ - u64 __val = (v); \ - asm volatile("msr_s " __stringify(r) ", %0" : : "r" (__val));\ - } while (0) - -static u64 __hyp_text __gic_v3_get_lr(unsigned int lr) -{ - switch (lr & 0xf) { - case 0: - return read_gicreg(ICH_LR0_EL2); - case 1: - return read_gicreg(ICH_LR1_EL2); - case 2: - return read_gicreg(ICH_LR2_EL2); - case 3: - return read_gicreg(ICH_LR3_EL2); - case 4: - return read_gicreg(ICH_LR4_EL2); - case 5: - return read_gicreg(ICH_LR5_EL2); - case 6: - return read_gicreg(ICH_LR6_EL2); - case 7: - return read_gicreg(ICH_LR7_EL2); - case 8: - return read_gicreg(ICH_LR8_EL2); - case 9: - return read_gicreg(ICH_LR9_EL2); - case 10: - return read_gicreg(ICH_LR10_EL2); - case 11: - return read_gicreg(ICH_LR11_EL2); - case 12: - return read_gicreg(ICH_LR12_EL2); - case 13: - return read_gicreg(ICH_LR13_EL2); - case 14: - return read_gicreg(ICH_LR14_EL2); - case 15: - return read_gicreg(ICH_LR15_EL2); - } - - unreachable(); -} - -static void __hyp_text __gic_v3_set_lr(u64 val, int lr) -{ - switch (lr & 0xf) { - case 0: - write_gicreg(val, ICH_LR0_EL2); - break; - case 1: - write_gicreg(val, ICH_LR1_EL2); - break; - case 2: - write_gicreg(val, ICH_LR2_EL2); - break; - case 3: - write_gicreg(val, ICH_LR3_EL2); - break; - case 4: - write_gicreg(val, ICH_LR4_EL2); - break; - case 5: - write_gicreg(val, ICH_LR5_EL2); - break; - case 6: - write_gicreg(val, ICH_LR6_EL2); - break; - case 7: - write_gicreg(val, ICH_LR7_EL2); - break; - case 8: - write_gicreg(val, ICH_LR8_EL2); - break; - case 9: - write_gicreg(val, ICH_LR9_EL2); - break; - case 10: - write_gicreg(val, ICH_LR10_EL2); - break; - case 11: - write_gicreg(val, ICH_LR11_EL2); - break; - case 12: - write_gicreg(val, ICH_LR12_EL2); - break; - case 13: - write_gicreg(val, ICH_LR13_EL2); - break; - case 14: - write_gicreg(val, ICH_LR14_EL2); - break; - case 15: - write_gicreg(val, ICH_LR15_EL2); - break; - } -} - -static void __hyp_text save_maint_int_state(struct kvm_vcpu *vcpu, int nr_lr) -{ - struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; - int i; - bool expect_mi; - - expect_mi = !!(cpu_if->vgic_hcr & ICH_HCR_UIE); - - for (i = 0; i < nr_lr; i++) { - if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i))) - continue; - - expect_mi |= (!(cpu_if->vgic_lr[i] & ICH_LR_HW) && - (cpu_if->vgic_lr[i] & ICH_LR_EOI)); - } - - if (expect_mi) { - cpu_if->vgic_misr = read_gicreg(ICH_MISR_EL2); - - if (cpu_if->vgic_misr & ICH_MISR_EOI) - cpu_if->vgic_eisr = read_gicreg(ICH_EISR_EL2); - else - cpu_if->vgic_eisr = 0; - } else { - cpu_if->vgic_misr = 0; - cpu_if->vgic_eisr = 0; - } -} - -void __hyp_text __vgic_v3_save_state(struct kvm_vcpu *vcpu) -{ - struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; - u64 val; - - /* - * Make sure stores to the GIC via the memory mapped interface - * are now visible to the system register interface. - */ - if (!cpu_if->vgic_sre) - dsb(st); - - cpu_if->vgic_vmcr = read_gicreg(ICH_VMCR_EL2); - - if (vcpu->arch.vgic_cpu.live_lrs) { - int i; - u32 max_lr_idx, nr_pri_bits; - - cpu_if->vgic_elrsr = read_gicreg(ICH_ELSR_EL2); - - write_gicreg(0, ICH_HCR_EL2); - val = read_gicreg(ICH_VTR_EL2); - max_lr_idx = vtr_to_max_lr_idx(val); - nr_pri_bits = vtr_to_nr_pri_bits(val); - - save_maint_int_state(vcpu, max_lr_idx + 1); - - for (i = 0; i <= max_lr_idx; i++) { - if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i))) - continue; - - if (cpu_if->vgic_elrsr & (1 << i)) - cpu_if->vgic_lr[i] &= ~ICH_LR_STATE; - else - cpu_if->vgic_lr[i] = __gic_v3_get_lr(i); - - __gic_v3_set_lr(0, i); - } - - switch (nr_pri_bits) { - case 7: - cpu_if->vgic_ap0r[3] = read_gicreg(ICH_AP0R3_EL2); - cpu_if->vgic_ap0r[2] = read_gicreg(ICH_AP0R2_EL2); - case 6: - cpu_if->vgic_ap0r[1] = read_gicreg(ICH_AP0R1_EL2); - default: - cpu_if->vgic_ap0r[0] = read_gicreg(ICH_AP0R0_EL2); - } - - switch (nr_pri_bits) { - case 7: - cpu_if->vgic_ap1r[3] = read_gicreg(ICH_AP1R3_EL2); - cpu_if->vgic_ap1r[2] = read_gicreg(ICH_AP1R2_EL2); - case 6: - cpu_if->vgic_ap1r[1] = read_gicreg(ICH_AP1R1_EL2); - default: - cpu_if->vgic_ap1r[0] = read_gicreg(ICH_AP1R0_EL2); - } - - vcpu->arch.vgic_cpu.live_lrs = 0; - } else { - cpu_if->vgic_misr = 0; - cpu_if->vgic_eisr = 0; - cpu_if->vgic_elrsr = 0xffff; - cpu_if->vgic_ap0r[0] = 0; - cpu_if->vgic_ap0r[1] = 0; - cpu_if->vgic_ap0r[2] = 0; - cpu_if->vgic_ap0r[3] = 0; - cpu_if->vgic_ap1r[0] = 0; - cpu_if->vgic_ap1r[1] = 0; - cpu_if->vgic_ap1r[2] = 0; - cpu_if->vgic_ap1r[3] = 0; - } - - val = read_gicreg(ICC_SRE_EL2); - write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2); - - if (!cpu_if->vgic_sre) { - /* Make sure ENABLE is set at EL2 before setting SRE at EL1 */ - isb(); - write_gicreg(1, ICC_SRE_EL1); - } -} - -void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu) -{ - struct vgic_v3_cpu_if *cpu_if = &vcpu->arch.vgic_cpu.vgic_v3; - u64 val; - u32 max_lr_idx, nr_pri_bits; - u16 live_lrs = 0; - int i; - - /* - * VFIQEn is RES1 if ICC_SRE_EL1.SRE is 1. This causes a - * Group0 interrupt (as generated in GICv2 mode) to be - * delivered as a FIQ to the guest, with potentially fatal - * consequences. So we must make sure that ICC_SRE_EL1 has - * been actually programmed with the value we want before - * starting to mess with the rest of the GIC. - */ - if (!cpu_if->vgic_sre) { - write_gicreg(0, ICC_SRE_EL1); - isb(); - } - - val = read_gicreg(ICH_VTR_EL2); - max_lr_idx = vtr_to_max_lr_idx(val); - nr_pri_bits = vtr_to_nr_pri_bits(val); - - for (i = 0; i <= max_lr_idx; i++) { - if (cpu_if->vgic_lr[i] & ICH_LR_STATE) - live_lrs |= (1 << i); - } - - write_gicreg(cpu_if->vgic_vmcr, ICH_VMCR_EL2); - - if (live_lrs) { - write_gicreg(cpu_if->vgic_hcr, ICH_HCR_EL2); - - switch (nr_pri_bits) { - case 7: - write_gicreg(cpu_if->vgic_ap0r[3], ICH_AP0R3_EL2); - write_gicreg(cpu_if->vgic_ap0r[2], ICH_AP0R2_EL2); - case 6: - write_gicreg(cpu_if->vgic_ap0r[1], ICH_AP0R1_EL2); - default: - write_gicreg(cpu_if->vgic_ap0r[0], ICH_AP0R0_EL2); - } - - switch (nr_pri_bits) { - case 7: - write_gicreg(cpu_if->vgic_ap1r[3], ICH_AP1R3_EL2); - write_gicreg(cpu_if->vgic_ap1r[2], ICH_AP1R2_EL2); - case 6: - write_gicreg(cpu_if->vgic_ap1r[1], ICH_AP1R1_EL2); - default: - write_gicreg(cpu_if->vgic_ap1r[0], ICH_AP1R0_EL2); - } - - for (i = 0; i <= max_lr_idx; i++) { - if (!(live_lrs & (1 << i))) - continue; - - __gic_v3_set_lr(cpu_if->vgic_lr[i], i); - } - } - - /* - * Ensures that the above will have reached the - * (re)distributors. This ensure the guest will read the - * correct values from the memory-mapped interface. - */ - if (!cpu_if->vgic_sre) { - isb(); - dsb(sy); - } - vcpu->arch.vgic_cpu.live_lrs = live_lrs; - - /* - * Prevent the guest from touching the GIC system registers if - * SRE isn't enabled for GICv3 emulation. - */ - write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE, - ICC_SRE_EL2); -} - -void __hyp_text __vgic_v3_init_lrs(void) -{ - int max_lr_idx = vtr_to_max_lr_idx(read_gicreg(ICH_VTR_EL2)); - int i; - - for (i = 0; i <= max_lr_idx; i++) - __gic_v3_set_lr(0, i); -} - -static u64 __hyp_text __vgic_v3_read_ich_vtr_el2(void) -{ - return read_gicreg(ICH_VTR_EL2); -} - -__alias(__vgic_v3_read_ich_vtr_el2) u64 __vgic_v3_get_ich_vtr_el2(void); diff --git a/arch/arm64/kvm/inject_fault.c b/arch/arm64/kvm/inject_fault.c index 898c0e6aedd4..da6a8cfa54a0 100644 --- a/arch/arm64/kvm/inject_fault.c +++ b/arch/arm64/kvm/inject_fault.c @@ -231,3 +231,15 @@ void kvm_inject_undefined(struct kvm_vcpu *vcpu) else inject_undef64(vcpu); } + +/** + * kvm_inject_vabt - inject an async abort / SError into the guest + * @vcpu: The VCPU to receive the exception + * + * It is assumed that this code is called from the VCPU thread and that the + * VCPU therefore is not currently executing guest code. + */ +void kvm_inject_vabt(struct kvm_vcpu *vcpu) +{ + vcpu_set_hcr(vcpu, vcpu_get_hcr(vcpu) | HCR_VSE); +} diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index e51367d159d0..f302fdb3a030 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -36,6 +36,7 @@ #include <asm/kvm_host.h> #include <asm/kvm_mmu.h> #include <asm/perf_event.h> +#include <asm/sysreg.h> #include <trace/events/kvm.h> @@ -67,11 +68,9 @@ static u32 get_ccsidr(u32 csselr) /* Make sure noone else changes CSSELR during this! */ local_irq_disable(); - /* Put value into CSSELR */ - asm volatile("msr csselr_el1, %x0" : : "r" (csselr)); + write_sysreg(csselr, csselr_el1); isb(); - /* Read result out of CCSIDR */ - asm volatile("mrs %0, ccsidr_el1" : "=r" (ccsidr)); + ccsidr = read_sysreg(ccsidr_el1); local_irq_enable(); return ccsidr; @@ -174,9 +173,7 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu, if (p->is_write) { return ignore_write(vcpu, p); } else { - u32 val; - asm volatile("mrs %0, dbgauthstatus_el1" : "=r" (val)); - p->regval = val; + p->regval = read_sysreg(dbgauthstatus_el1); return true; } } @@ -429,10 +426,7 @@ static void reset_wcr(struct kvm_vcpu *vcpu, static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { - u64 amair; - - asm volatile("mrs %0, amair_el1\n" : "=r" (amair)); - vcpu_sys_reg(vcpu, AMAIR_EL1) = amair; + vcpu_sys_reg(vcpu, AMAIR_EL1) = read_sysreg(amair_el1); } static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) @@ -456,8 +450,9 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { u64 pmcr, val; - asm volatile("mrs %0, pmcr_el0\n" : "=r" (pmcr)); - /* Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) is reset to UNKNOWN + pmcr = read_sysreg(pmcr_el0); + /* + * Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN * except PMCR.E resetting to zero. */ val = ((pmcr & ~ARMV8_PMU_PMCR_MASK) @@ -557,9 +552,9 @@ static bool access_pmceid(struct kvm_vcpu *vcpu, struct sys_reg_params *p, return false; if (!(p->Op2 & 1)) - asm volatile("mrs %0, pmceid0_el0\n" : "=r" (pmceid)); + pmceid = read_sysreg(pmceid0_el0); else - asm volatile("mrs %0, pmceid1_el0\n" : "=r" (pmceid)); + pmceid = read_sysreg(pmceid1_el0); p->regval = pmceid; @@ -1833,11 +1828,7 @@ static const struct sys_reg_desc *index_to_sys_reg_desc(struct kvm_vcpu *vcpu, static void get_##reg(struct kvm_vcpu *v, \ const struct sys_reg_desc *r) \ { \ - u64 val; \ - \ - asm volatile("mrs %0, " __stringify(reg) "\n" \ - : "=r" (val)); \ - ((struct sys_reg_desc *)r)->val = val; \ + ((struct sys_reg_desc *)r)->val = read_sysreg(reg); \ } FUNCTION_INVARIANT(midr_el1) diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c index ed90578fa120..46af7186bca6 100644 --- a/arch/arm64/kvm/sys_regs_generic_v8.c +++ b/arch/arm64/kvm/sys_regs_generic_v8.c @@ -26,6 +26,7 @@ #include <asm/kvm_host.h> #include <asm/kvm_emulate.h> #include <asm/kvm_coproc.h> +#include <asm/sysreg.h> #include <linux/init.h> #include "sys_regs.h" @@ -43,10 +44,7 @@ static bool access_actlr(struct kvm_vcpu *vcpu, static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { - u64 actlr; - - asm volatile("mrs %0, actlr_el1\n" : "=r" (actlr)); - vcpu_sys_reg(vcpu, ACTLR_EL1) = actlr; + vcpu_sys_reg(vcpu, ACTLR_EL1) = read_sysreg(actlr_el1); } /* diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S index 4c1e700840b6..c3cd65e31814 100644 --- a/arch/arm64/lib/copy_page.S +++ b/arch/arm64/lib/copy_page.S @@ -29,14 +29,11 @@ * x1 - src */ ENTRY(copy_page) -alternative_if_not ARM64_HAS_NO_HW_PREFETCH - nop - nop -alternative_else +alternative_if ARM64_HAS_NO_HW_PREFETCH # Prefetch two cache lines ahead. prfm pldl1strm, [x1, #128] prfm pldl1strm, [x1, #256] -alternative_endif +alternative_else_nop_endif ldp x2, x3, [x1] ldp x4, x5, [x1, #16] @@ -52,11 +49,9 @@ alternative_endif 1: subs x18, x18, #128 -alternative_if_not ARM64_HAS_NO_HW_PREFETCH - nop -alternative_else +alternative_if ARM64_HAS_NO_HW_PREFETCH prfm pldl1strm, [x1, #384] -alternative_endif +alternative_else_nop_endif stnp x2, x3, [x0] ldp x2, x3, [x1] diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S index 07d7352d7c38..58b5a906ff78 100644 --- a/arch/arm64/mm/cache.S +++ b/arch/arm64/mm/cache.S @@ -105,19 +105,20 @@ ENTRY(__clean_dcache_area_pou) ENDPROC(__clean_dcache_area_pou) /* - * __inval_cache_range(start, end) - * - start - start address of region - * - end - end address of region + * __dma_inv_area(start, size) + * - start - virtual start address of region + * - size - size in question */ -ENTRY(__inval_cache_range) +__dma_inv_area: + add x1, x1, x0 /* FALLTHROUGH */ /* - * __dma_inv_range(start, end) - * - start - virtual start address of region - * - end - virtual end address of region + * __inval_cache_range(start, end) + * - start - start address of region + * - end - end address of region */ -__dma_inv_range: +ENTRY(__inval_cache_range) dcache_line_size x2, x3 sub x3, x2, #1 tst x1, x3 // end cache line aligned? @@ -136,46 +137,43 @@ __dma_inv_range: dsb sy ret ENDPIPROC(__inval_cache_range) -ENDPROC(__dma_inv_range) +ENDPROC(__dma_inv_area) + +/* + * __clean_dcache_area_poc(kaddr, size) + * + * Ensure that any D-cache lines for the interval [kaddr, kaddr+size) + * are cleaned to the PoC. + * + * - kaddr - kernel address + * - size - size in question + */ +ENTRY(__clean_dcache_area_poc) + /* FALLTHROUGH */ /* - * __dma_clean_range(start, end) + * __dma_clean_area(start, size) * - start - virtual start address of region - * - end - virtual end address of region + * - size - size in question */ -__dma_clean_range: - dcache_line_size x2, x3 - sub x3, x2, #1 - bic x0, x0, x3 -1: -alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE - dc cvac, x0 -alternative_else - dc civac, x0 -alternative_endif - add x0, x0, x2 - cmp x0, x1 - b.lo 1b - dsb sy +__dma_clean_area: + dcache_by_line_op cvac, sy, x0, x1, x2, x3 ret -ENDPROC(__dma_clean_range) +ENDPIPROC(__clean_dcache_area_poc) +ENDPROC(__dma_clean_area) /* - * __dma_flush_range(start, end) + * __dma_flush_area(start, size) + * + * clean & invalidate D / U line + * * - start - virtual start address of region - * - end - virtual end address of region + * - size - size in question */ -ENTRY(__dma_flush_range) - dcache_line_size x2, x3 - sub x3, x2, #1 - bic x0, x0, x3 -1: dc civac, x0 // clean & invalidate D / U line - add x0, x0, x2 - cmp x0, x1 - b.lo 1b - dsb sy +ENTRY(__dma_flush_area) + dcache_by_line_op civac, sy, x0, x1, x2, x3 ret -ENDPIPROC(__dma_flush_range) +ENDPIPROC(__dma_flush_area) /* * __dma_map_area(start, size, dir) @@ -184,10 +182,9 @@ ENDPIPROC(__dma_flush_range) * - dir - DMA direction */ ENTRY(__dma_map_area) - add x1, x1, x0 cmp w2, #DMA_FROM_DEVICE - b.eq __dma_inv_range - b __dma_clean_range + b.eq __dma_inv_area + b __dma_clean_area ENDPIPROC(__dma_map_area) /* @@ -197,8 +194,7 @@ ENDPIPROC(__dma_map_area) * - dir - DMA direction */ ENTRY(__dma_unmap_area) - add x1, x1, x0 cmp w2, #DMA_TO_DEVICE - b.ne __dma_inv_range + b.ne __dma_inv_area ret ENDPIPROC(__dma_unmap_area) diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c index 610d8e53011e..3f74d0d98de6 100644 --- a/arch/arm64/mm/dma-mapping.c +++ b/arch/arm64/mm/dma-mapping.c @@ -20,6 +20,7 @@ #include <linux/gfp.h> #include <linux/acpi.h> #include <linux/bootmem.h> +#include <linux/cache.h> #include <linux/export.h> #include <linux/slab.h> #include <linux/genalloc.h> @@ -30,7 +31,7 @@ #include <asm/cacheflush.h> -static int swiotlb __read_mostly; +static int swiotlb __ro_after_init; static pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot, bool coherent) @@ -168,7 +169,7 @@ static void *__dma_alloc(struct device *dev, size_t size, return ptr; /* remove any dirty cache lines on the kernel alias */ - __dma_flush_range(ptr, ptr + size); + __dma_flush_area(ptr, size); /* create a coherent mapping */ page = virt_to_page(ptr); @@ -387,7 +388,7 @@ static int __init atomic_pool_init(void) void *page_addr = page_address(page); memset(page_addr, 0, atomic_pool_size); - __dma_flush_range(page_addr, page_addr + atomic_pool_size); + __dma_flush_area(page_addr, atomic_pool_size); atomic_pool = gen_pool_create(PAGE_SHIFT, -1); if (!atomic_pool) @@ -548,7 +549,7 @@ fs_initcall(dma_debug_do_init); /* Thankfully, all cache ops are by VA so we can ignore phys here */ static void flush_page(struct device *dev, const void *virt, phys_addr_t phys) { - __dma_flush_range(virt, virt + PAGE_SIZE); + __dma_flush_area(virt, PAGE_SIZE); } static void *__iommu_alloc_attrs(struct device *dev, size_t size, diff --git a/arch/arm64/mm/extable.c b/arch/arm64/mm/extable.c index 81acd4706878..c9f118cd812b 100644 --- a/arch/arm64/mm/extable.c +++ b/arch/arm64/mm/extable.c @@ -2,7 +2,7 @@ * Based on arch/arm/mm/extable.c */ -#include <linux/module.h> +#include <linux/extable.h> #include <linux/uaccess.h> int fixup_exception(struct pt_regs *regs) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 05d2bd776c69..53d9159662fe 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -18,7 +18,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <linux/module.h> +#include <linux/extable.h> #include <linux/signal.h> #include <linux/mm.h> #include <linux/hardirq.h> @@ -251,8 +251,7 @@ static int __do_page_fault(struct mm_struct *mm, unsigned long addr, good_area: /* * Check that the permissions on the VMA allow for the fault which - * occurred. If we encountered a write or exec fault, we must have - * appropriate permissions, otherwise we allow any permission. + * occurred. */ if (!(vma->vm_flags & vm_flags)) { fault = VM_FAULT_BADACCESS; @@ -288,7 +287,7 @@ static int __kprobes do_page_fault(unsigned long addr, unsigned int esr, struct task_struct *tsk; struct mm_struct *mm; int fault, sig, code; - unsigned long vm_flags = VM_READ | VM_WRITE | VM_EXEC; + unsigned long vm_flags = VM_READ | VM_WRITE; unsigned int mm_flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; if (notify_page_fault(regs, esr)) diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c index 43a76b07eb32..8377329d8c97 100644 --- a/arch/arm64/mm/flush.c +++ b/arch/arm64/mm/flush.c @@ -25,8 +25,6 @@ #include <asm/cachetype.h> #include <asm/tlbflush.h> -#include "mm.h" - void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index bbb7ee76e319..21c489bdeb4e 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -23,6 +23,7 @@ #include <linux/swap.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/cache.h> #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> @@ -34,6 +35,7 @@ #include <linux/dma-contiguous.h> #include <linux/efi.h> #include <linux/swiotlb.h> +#include <linux/vmalloc.h> #include <asm/boot.h> #include <asm/fixmap.h> @@ -47,16 +49,14 @@ #include <asm/tlb.h> #include <asm/alternative.h> -#include "mm.h" - /* * We need to be able to catch inadvertent references to memstart_addr * that occur (potentially in generic code) before arm64_memblock_init() * executes, which assigns it its actual value. So use a default value * that cannot be mistaken for a real physical address. */ -s64 memstart_addr __read_mostly = -1; -phys_addr_t arm64_dma_phys_limit __read_mostly; +s64 memstart_addr __ro_after_init = -1; +phys_addr_t arm64_dma_phys_limit __ro_after_init; #ifdef CONFIG_BLK_DEV_INITRD static int __init early_initrd(char *p) @@ -485,7 +485,12 @@ void free_initmem(void) { free_reserved_area(__va(__pa(__init_begin)), __va(__pa(__init_end)), 0, "unused kernel"); - fixup_init(); + /* + * Unmap the __init region but leave the VM area in place. This + * prevents the region from being reused for kernel modules, which + * is not supported by kallsyms. + */ + unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin)); } #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/arm64/mm/mm.h b/arch/arm64/mm/mm.h deleted file mode 100644 index 71fe98985455..000000000000 --- a/arch/arm64/mm/mm.h +++ /dev/null @@ -1,2 +0,0 @@ - -void fixup_init(void); diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 4989948d1feb..05615a3fdc6f 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -17,6 +17,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/cache.h> #include <linux/export.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -42,11 +43,9 @@ #include <asm/memblock.h> #include <asm/mmu_context.h> -#include "mm.h" - u64 idmap_t0sz = TCR_T0SZ(VA_BITS); -u64 kimage_voffset __read_mostly; +u64 kimage_voffset __ro_after_init; EXPORT_SYMBOL(kimage_voffset); /* @@ -399,16 +398,6 @@ void mark_rodata_ro(void) section_size, PAGE_KERNEL_RO); } -void fixup_init(void) -{ - /* - * Unmap the __init region but leave the VM area in place. This - * prevents the region from being reused for kernel modules, which - * is not supported by kallsyms. - */ - unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin)); -} - static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end, pgprot_t prot, struct vm_struct *vma) { diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index 5bb15eab6f00..778a985c8a70 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -17,6 +17,8 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#define pr_fmt(fmt) "NUMA: " fmt + #include <linux/acpi.h> #include <linux/bootmem.h> #include <linux/memblock.h> @@ -24,6 +26,7 @@ #include <linux/of.h> #include <asm/acpi.h> +#include <asm/sections.h> struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); @@ -38,10 +41,9 @@ static __init int numa_parse_early_param(char *opt) { if (!opt) return -EINVAL; - if (!strncmp(opt, "off", 3)) { - pr_info("%s\n", "NUMA turned off"); + if (!strncmp(opt, "off", 3)) numa_off = true; - } + return 0; } early_param("numa", numa_parse_early_param); @@ -93,7 +95,6 @@ void numa_clear_node(unsigned int cpu) */ static void __init setup_node_to_cpumask_map(void) { - unsigned int cpu; int node; /* setup nr_node_ids if not done yet */ @@ -106,11 +107,8 @@ static void __init setup_node_to_cpumask_map(void) cpumask_clear(node_to_cpumask_map[node]); } - for_each_possible_cpu(cpu) - set_cpu_numa_node(cpu, NUMA_NO_NODE); - /* cpumask_of_node() will now work */ - pr_debug("NUMA: Node to cpumask map for %d nodes\n", nr_node_ids); + pr_debug("Node to cpumask map for %d nodes\n", nr_node_ids); } /* @@ -118,18 +116,77 @@ static void __init setup_node_to_cpumask_map(void) */ void numa_store_cpu_info(unsigned int cpu) { - map_cpu_to_node(cpu, numa_off ? 0 : cpu_to_node_map[cpu]); + map_cpu_to_node(cpu, cpu_to_node_map[cpu]); } void __init early_map_cpu_to_node(unsigned int cpu, int nid) { /* fallback to node 0 */ - if (nid < 0 || nid >= MAX_NUMNODES) + if (nid < 0 || nid >= MAX_NUMNODES || numa_off) nid = 0; cpu_to_node_map[cpu] = nid; + + /* + * We should set the numa node of cpu0 as soon as possible, because it + * has already been set up online before. cpu_to_node(0) will soon be + * called. + */ + if (!cpu) + set_cpu_numa_node(cpu, nid); +} + +#ifdef CONFIG_HAVE_SETUP_PER_CPU_AREA +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +EXPORT_SYMBOL(__per_cpu_offset); + +static int __init early_cpu_to_node(int cpu) +{ + return cpu_to_node_map[cpu]; +} + +static int __init pcpu_cpu_distance(unsigned int from, unsigned int to) +{ + return node_distance(from, to); } +static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, + size_t align) +{ + int nid = early_cpu_to_node(cpu); + + return memblock_virt_alloc_try_nid(size, align, + __pa(MAX_DMA_ADDRESS), MEMBLOCK_ALLOC_ACCESSIBLE, nid); +} + +static void __init pcpu_fc_free(void *ptr, size_t size) +{ + memblock_free_early(__pa(ptr), size); +} + +void __init setup_per_cpu_areas(void) +{ + unsigned long delta; + unsigned int cpu; + int rc; + + /* + * Always reserve area for module percpu variables. That's + * what the legacy allocator did. + */ + rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE, + PERCPU_DYNAMIC_RESERVE, PAGE_SIZE, + pcpu_cpu_distance, + pcpu_fc_alloc, pcpu_fc_free); + if (rc < 0) + panic("Failed to initialize percpu areas."); + + delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start; + for_each_possible_cpu(cpu) + __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu]; +} +#endif + /** * numa_add_memblk - Set node id to memblk * @nid: NUMA node ID of the new memblk @@ -145,13 +202,13 @@ int __init numa_add_memblk(int nid, u64 start, u64 end) ret = memblock_set_node(start, (end - start), &memblock.memory, nid); if (ret < 0) { - pr_err("NUMA: memblock [0x%llx - 0x%llx] failed to add on node %d\n", + pr_err("memblock [0x%llx - 0x%llx] failed to add on node %d\n", start, (end - 1), nid); return ret; } node_set(nid, numa_nodes_parsed); - pr_info("NUMA: Adding memblock [0x%llx - 0x%llx] on node %d\n", + pr_info("Adding memblock [0x%llx - 0x%llx] on node %d\n", start, (end - 1), nid); return ret; } @@ -166,19 +223,18 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) void *nd; int tnid; - pr_info("NUMA: Initmem setup node %d [mem %#010Lx-%#010Lx]\n", - nid, start_pfn << PAGE_SHIFT, - (end_pfn << PAGE_SHIFT) - 1); + pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", + nid, start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1); nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); nd = __va(nd_pa); /* report and initialize */ - pr_info("NUMA: NODE_DATA [mem %#010Lx-%#010Lx]\n", + pr_info("NODE_DATA [mem %#010Lx-%#010Lx]\n", nd_pa, nd_pa + nd_size - 1); tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT); if (tnid != nid) - pr_info("NUMA: NODE_DATA(%d) on node %d\n", nid, tnid); + pr_info("NODE_DATA(%d) on node %d\n", nid, tnid); node_data[nid] = nd; memset(NODE_DATA(nid), 0, sizeof(pg_data_t)); @@ -235,8 +291,7 @@ static int __init numa_alloc_distance(void) numa_distance[i * numa_distance_cnt + j] = i == j ? LOCAL_DISTANCE : REMOTE_DISTANCE; - pr_debug("NUMA: Initialized distance table, cnt=%d\n", - numa_distance_cnt); + pr_debug("Initialized distance table, cnt=%d\n", numa_distance_cnt); return 0; } @@ -257,20 +312,20 @@ static int __init numa_alloc_distance(void) void __init numa_set_distance(int from, int to, int distance) { if (!numa_distance) { - pr_warn_once("NUMA: Warning: distance table not allocated yet\n"); + pr_warn_once("Warning: distance table not allocated yet\n"); return; } if (from >= numa_distance_cnt || to >= numa_distance_cnt || from < 0 || to < 0) { - pr_warn_once("NUMA: Warning: node ids are out of bound, from=%d to=%d distance=%d\n", + pr_warn_once("Warning: node ids are out of bound, from=%d to=%d distance=%d\n", from, to, distance); return; } if ((u8)distance != distance || (from == to && distance != LOCAL_DISTANCE)) { - pr_warn_once("NUMA: Warning: invalid distance parameter, from=%d to=%d distance=%d\n", + pr_warn_once("Warning: invalid distance parameter, from=%d to=%d distance=%d\n", from, to, distance); return; } @@ -297,7 +352,7 @@ static int __init numa_register_nodes(void) /* Check that valid nid is set to memblks */ for_each_memblock(memory, mblk) if (mblk->nid == NUMA_NO_NODE || mblk->nid >= MAX_NUMNODES) { - pr_warn("NUMA: Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", + pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n", mblk->nid, mblk->base, mblk->base + mblk->size - 1); return -EINVAL; @@ -335,8 +390,10 @@ static int __init numa_init(int (*init_func)(void)) if (ret < 0) return ret; - if (nodes_empty(numa_nodes_parsed)) + if (nodes_empty(numa_nodes_parsed)) { + pr_info("No NUMA configuration found\n"); return -EINVAL; + } ret = numa_register_nodes(); if (ret < 0) @@ -344,10 +401,6 @@ static int __init numa_init(int (*init_func)(void)) setup_node_to_cpumask_map(); - /* init boot processor */ - cpu_to_node_map[0] = 0; - map_cpu_to_node(0, 0); - return 0; } @@ -367,10 +420,8 @@ static int __init dummy_numa_init(void) if (numa_off) pr_info("NUMA disabled\n"); /* Forced off on command line. */ - else - pr_info("No NUMA configuration found\n"); - pr_info("NUMA: Faking a node at [mem %#018Lx-%#018Lx]\n", - 0LLU, PFN_PHYS(max_pfn) - 1); + pr_info("Faking a node at [mem %#018Lx-%#018Lx]\n", + 0LLU, PFN_PHYS(max_pfn) - 1); for_each_memblock(memory, mblk) { ret = numa_add_memblk(0, mblk->base, mblk->base + mblk->size); diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index ca6d268e3313..8def55e7249b 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -139,4 +139,43 @@ void __kernel_map_pages(struct page *page, int numpages, int enable) __pgprot(0), __pgprot(PTE_VALID)); } -#endif +#ifdef CONFIG_HIBERNATION +/* + * When built with CONFIG_DEBUG_PAGEALLOC and CONFIG_HIBERNATION, this function + * is used to determine if a linear map page has been marked as not-valid by + * CONFIG_DEBUG_PAGEALLOC. Walk the page table and check the PTE_VALID bit. + * This is based on kern_addr_valid(), which almost does what we need. + * + * Because this is only called on the kernel linear map, p?d_sect() implies + * p?d_present(). When debug_pagealloc is enabled, sections mappings are + * disabled. + */ +bool kernel_page_present(struct page *page) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + unsigned long addr = (unsigned long)page_address(page); + + pgd = pgd_offset_k(addr); + if (pgd_none(*pgd)) + return false; + + pud = pud_offset(pgd, addr); + if (pud_none(*pud)) + return false; + if (pud_sect(*pud)) + return true; + + pmd = pmd_offset(pud, addr); + if (pmd_none(*pmd)) + return false; + if (pmd_sect(*pmd)) + return true; + + pte = pte_offset_kernel(pmd, addr); + return pte_valid(*pte); +} +#endif /* CONFIG_HIBERNATION */ +#endif /* CONFIG_DEBUG_PAGEALLOC */ diff --git a/arch/arm64/mm/pgd.c b/arch/arm64/mm/pgd.c index ae11d4e03d0e..371c5f03a170 100644 --- a/arch/arm64/mm/pgd.c +++ b/arch/arm64/mm/pgd.c @@ -26,8 +26,6 @@ #include <asm/page.h> #include <asm/tlbflush.h> -#include "mm.h" - static struct kmem_cache *pgd_cache; pgd_t *pgd_alloc(struct mm_struct *mm) diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S index 9d37e967fa19..352c73b6a59e 100644 --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -83,6 +83,7 @@ ENDPROC(cpu_do_suspend) * * x0: Address of context pointer */ + .pushsection ".idmap.text", "ax" ENTRY(cpu_do_resume) ldp x2, x3, [x0] ldp x4, x5, [x0, #16] @@ -120,6 +121,7 @@ ENTRY(cpu_do_resume) isb ret ENDPROC(cpu_do_resume) + .popsection #endif /* @@ -134,17 +136,12 @@ ENTRY(cpu_do_switch_mm) bfi x0, x1, #48, #16 // set the ASID msr ttbr0_el1, x0 // set TTBR0 isb -alternative_if_not ARM64_WORKAROUND_CAVIUM_27456 - ret - nop - nop - nop -alternative_else +alternative_if ARM64_WORKAROUND_CAVIUM_27456 ic iallu dsb nsh isb +alternative_else_nop_endif ret -alternative_endif ENDPROC(cpu_do_switch_mm) .pushsection ".idmap.text", "ax" @@ -181,6 +178,7 @@ ENDPROC(idmap_cpu_replace_ttbr1) * Initialise the processor for turning the MMU on. Return in x0 the * value of the SCTLR_EL1 register. */ + .pushsection ".idmap.text", "ax" ENTRY(__cpu_setup) tlbi vmalle1 // Invalidate local TLB dsb nsh @@ -266,3 +264,4 @@ ENDPROC(__cpu_setup) crval: .word 0xfcffffff // clear .word 0x34d5d91d // set + .popsection |