diff options
Diffstat (limited to 'arch/ia64/hp/sim')
| -rw-r--r-- | arch/ia64/hp/sim/Kconfig | 20 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/Makefile | 16 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/Makefile | 37 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/boot_head.S | 144 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/bootloader.c | 176 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/bootloader.lds | 65 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/fw-emu.c | 398 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/boot/ssc.h | 35 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim.S | 10 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim_console.c | 65 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim_irq.c | 51 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim_machvec.c | 3 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim_setup.c | 52 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/hpsim_ssc.h | 36 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/simeth.c | 530 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/simscsi.c | 404 | ||||
| -rw-r--r-- | arch/ia64/hp/sim/simserial.c | 1032 |
17 files changed, 3074 insertions, 0 deletions
diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig new file mode 100644 index 000000000000..18ccb1266e18 --- /dev/null +++ b/arch/ia64/hp/sim/Kconfig @@ -0,0 +1,20 @@ + +menu "HP Simulator drivers" + depends on IA64_HP_SIM || IA64_GENERIC + +config HP_SIMETH + bool "Simulated Ethernet " + +config HP_SIMSERIAL + bool "Simulated serial driver support" + +config HP_SIMSERIAL_CONSOLE + bool "Console for HP simulator" + depends on HP_SIMSERIAL + +config HP_SIMSCSI + tristate "Simulated SCSI disk" + depends on SCSI + +endmenu + diff --git a/arch/ia64/hp/sim/Makefile b/arch/ia64/hp/sim/Makefile new file mode 100644 index 000000000000..d10da47931d7 --- /dev/null +++ b/arch/ia64/hp/sim/Makefile @@ -0,0 +1,16 @@ +# +# ia64/platform/hp/sim/Makefile +# +# Copyright (C) 2002 Hewlett-Packard Co. +# David Mosberger-Tang <davidm@hpl.hp.com> +# Copyright (C) 1999 Silicon Graphics, Inc. +# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com) +# + +obj-y := hpsim_irq.o hpsim_setup.o hpsim.o +obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o + +obj-$(CONFIG_HP_SIMETH) += simeth.o +obj-$(CONFIG_HP_SIMSERIAL) += simserial.o +obj-$(CONFIG_HP_SIMSERIAL_CONSOLE) += hpsim_console.o +obj-$(CONFIG_HP_SIMSCSI) += simscsi.o diff --git a/arch/ia64/hp/sim/boot/Makefile b/arch/ia64/hp/sim/boot/Makefile new file mode 100644 index 000000000000..df6e9968c845 --- /dev/null +++ b/arch/ia64/hp/sim/boot/Makefile @@ -0,0 +1,37 @@ +# +# ia64/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1998, 2003 by David Mosberger-Tang <davidm@hpl.hp.com> +# + +targets-$(CONFIG_IA64_HP_SIM) += bootloader +targets := vmlinux.bin vmlinux.gz $(targets-y) + +quiet_cmd_cptotop = LN $@ + cmd_cptotop = ln -f $< $@ + +vmlinux.gz: $(obj)/vmlinux.gz $(addprefix $(obj)/,$(targets-y)) + $(call cmd,cptotop) + @echo ' Kernel: $@ is ready' + +boot: bootloader + +bootloader: $(obj)/bootloader + $(call cmd,cptotop) + +$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + + +LDFLAGS_bootloader = -static -T + +$(obj)/bootloader: $(src)/bootloader.lds $(obj)/bootloader.o $(obj)/boot_head.o $(obj)/fw-emu.o \ + lib/lib.a arch/ia64/lib/lib.a FORCE + $(call if_changed,ld) diff --git a/arch/ia64/hp/sim/boot/boot_head.S b/arch/ia64/hp/sim/boot/boot_head.S new file mode 100644 index 000000000000..9364199e5632 --- /dev/null +++ b/arch/ia64/hp/sim/boot/boot_head.S @@ -0,0 +1,144 @@ +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#include <asm/asmmacro.h> + + .bss + .align 16 +stack_mem: + .skip 16834 + + .text + +/* This needs to be defined because lib/string.c:strlcat() calls it in case of error... */ +GLOBAL_ENTRY(printk) + break 0 +END(printk) + +GLOBAL_ENTRY(_start) + .prologue + .save rp, r0 + .body + movl gp = __gp + movl sp = stack_mem + bsw.1 + br.call.sptk.many rp=start_bootloader +END(_start) + +/* + * Set a break point on this function so that symbols are available to set breakpoints in + * the kernel being debugged. + */ +GLOBAL_ENTRY(debug_break) + br.ret.sptk.many b0 +END(debug_break) + +GLOBAL_ENTRY(ssc) + .regstk 5,0,0,0 + mov r15=in4 + break 0x80001 + br.ret.sptk.many b0 +END(ssc) + +GLOBAL_ENTRY(jmp_to_kernel) + .regstk 2,0,0,0 + mov r28=in0 + mov b7=in1 + br.sptk.few b7 +END(jmp_to_kernel) + + +GLOBAL_ENTRY(pal_emulator_static) + mov r8=-1 + mov r9=256 + ;; + cmp.gtu p6,p7=r9,r28 /* r28 <= 255? */ +(p6) br.cond.sptk.few static + ;; + mov r9=512 + ;; + cmp.gtu p6,p7=r9,r28 +(p6) br.cond.sptk.few stacked + ;; +static: cmp.eq p6,p7=6,r28 /* PAL_PTCE_INFO */ +(p7) br.cond.sptk.few 1f + ;; + mov r8=0 /* status = 0 */ + movl r9=0x100000000 /* tc.base */ + movl r10=0x0000000200000003 /* count[0], count[1] */ + movl r11=0x1000000000002000 /* stride[0], stride[1] */ + br.cond.sptk.few rp +1: cmp.eq p6,p7=14,r28 /* PAL_FREQ_RATIOS */ +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9 =0x100000064 /* proc_ratio (1/100) */ + movl r10=0x100000100 /* bus_ratio<<32 (1/256) */ + movl r11=0x100000064 /* itc_ratio<<32 (1/100) */ + ;; +1: cmp.eq p6,p7=19,r28 /* PAL_RSE_INFO */ +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + mov r9=96 /* num phys stacked */ + mov r10=0 /* hints */ + mov r11=0 + br.cond.sptk.few rp +1: cmp.eq p6,p7=1,r28 /* PAL_CACHE_FLUSH */ +(p7) br.cond.sptk.few 1f + mov r9=ar.lc + movl r8=524288 /* flush 512k million cache lines (16MB) */ + ;; + mov ar.lc=r8 + movl r8=0xe000000000000000 + ;; +.loop: fc r8 + add r8=32,r8 + br.cloop.sptk.few .loop + sync.i + ;; + srlz.i + ;; + mov ar.lc=r9 + mov r8=r0 + ;; +1: cmp.eq p6,p7=15,r28 /* PAL_PERF_MON_INFO */ +(p7) br.cond.sptk.few 1f + mov r8=0 /* status = 0 */ + movl r9 =0x08122f04 /* generic=4 width=47 retired=8 cycles=18 */ + mov r10=0 /* reserved */ + mov r11=0 /* reserved */ + mov r16=0xffff /* implemented PMC */ + mov r17=0x3ffff /* implemented PMD */ + add r18=8,r29 /* second index */ + ;; + st8 [r29]=r16,16 /* store implemented PMC */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r17,16 /* store implemented PMD */ + st8 [r18]=r0,16 /* clear remaining bits */ + mov r16=0xf0 /* cycles count capable PMC */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + mov r17=0xf0 /* retired bundles capable PMC */ + ;; + st8 [r29]=r16,16 /* store cycles capable */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r17,16 /* store retired bundle capable */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; + st8 [r29]=r0,16 /* clear remaining bits */ + st8 [r18]=r0,16 /* clear remaining bits */ + ;; +1: br.cond.sptk.few rp +stacked: + br.ret.sptk.few rp +END(pal_emulator_static) diff --git a/arch/ia64/hp/sim/boot/bootloader.c b/arch/ia64/hp/sim/boot/bootloader.c new file mode 100644 index 000000000000..51a7b7b4dd0e --- /dev/null +++ b/arch/ia64/hp/sim/boot/bootloader.c @@ -0,0 +1,176 @@ +/* + * arch/ia64/hp/sim/boot/bootloader.c + * + * Loads an ELF kernel. + * + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + * + * 01/07/99 S.Eranian modified to pass command line arguments to kernel + */ +struct task_struct; /* forward declaration for elf.h */ + +#include <linux/config.h> +#include <linux/elf.h> +#include <linux/init.h> +#include <linux/kernel.h> + +#include <asm/elf.h> +#include <asm/intrinsics.h> +#include <asm/pal.h> +#include <asm/pgtable.h> +#include <asm/sal.h> +#include <asm/system.h> + +#include "ssc.h" + +struct disk_req { + unsigned long addr; + unsigned len; +}; + +struct disk_stat { + int fd; + unsigned count; +}; + +extern void jmp_to_kernel (unsigned long bp, unsigned long e_entry); +extern struct ia64_boot_param *sys_fw_init (const char *args, int arglen); +extern void debug_break (void); + +static void +cons_write (const char *buf) +{ + unsigned long ch; + + while ((ch = *buf++) != '\0') { + ssc(ch, 0, 0, 0, SSC_PUTCHAR); + if (ch == '\n') + ssc('\r', 0, 0, 0, SSC_PUTCHAR); + } +} + +#define MAX_ARGS 32 + +void +start_bootloader (void) +{ + static char mem[4096]; + static char buffer[1024]; + unsigned long off; + int fd, i; + struct disk_req req; + struct disk_stat stat; + struct elfhdr *elf; + struct elf_phdr *elf_phdr; /* program header */ + unsigned long e_entry, e_phoff, e_phnum; + register struct ia64_boot_param *bp; + char *kpath, *args; + long arglen = 0; + + ssc(0, 0, 0, 0, SSC_CONSOLE_INIT); + + /* + * S.Eranian: extract the commandline argument from the simulator + * + * The expected format is as follows: + * + * kernelname args... + * + * Both are optional but you can't have the second one without the first. + */ + arglen = ssc((long) buffer, 0, 0, 0, SSC_GET_ARGS); + + kpath = "vmlinux"; + args = buffer; + if (arglen > 0) { + kpath = buffer; + while (*args != ' ' && *args != '\0') + ++args, --arglen; + if (*args == ' ') + *args++ = '\0', --arglen; + } + + if (arglen <= 0) { + args = ""; + arglen = 1; + } + + fd = ssc((long) kpath, 1, 0, 0, SSC_OPEN); + + if (fd < 0) { + cons_write(kpath); + cons_write(": file not found, reboot now\n"); + for(;;); + } + stat.fd = fd; + off = 0; + + req.len = sizeof(mem); + req.addr = (long) mem; + ssc(fd, 1, (long) &req, off, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + + elf = (struct elfhdr *) mem; + if (elf->e_ident[0] == 0x7f && strncmp(elf->e_ident + 1, "ELF", 3) != 0) { + cons_write("not an ELF file\n"); + return; + } + if (elf->e_type != ET_EXEC) { + cons_write("not an ELF executable\n"); + return; + } + if (!elf_check_arch(elf)) { + cons_write("kernel not for this processor\n"); + return; + } + + e_entry = elf->e_entry; + e_phnum = elf->e_phnum; + e_phoff = elf->e_phoff; + + cons_write("loading "); + cons_write(kpath); + cons_write("...\n"); + + for (i = 0; i < e_phnum; ++i) { + req.len = sizeof(*elf_phdr); + req.addr = (long) mem; + ssc(fd, 1, (long) &req, e_phoff, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + if (stat.count != sizeof(*elf_phdr)) { + cons_write("failed to read phdr\n"); + return; + } + e_phoff += sizeof(*elf_phdr); + + elf_phdr = (struct elf_phdr *) mem; + + if (elf_phdr->p_type != PT_LOAD) + continue; + + req.len = elf_phdr->p_filesz; + req.addr = __pa(elf_phdr->p_paddr); + ssc(fd, 1, (long) &req, elf_phdr->p_offset, SSC_READ); + ssc((long) &stat, 0, 0, 0, SSC_WAIT_COMPLETION); + memset((char *)__pa(elf_phdr->p_paddr) + elf_phdr->p_filesz, 0, + elf_phdr->p_memsz - elf_phdr->p_filesz); + } + ssc(fd, 0, 0, 0, SSC_CLOSE); + + cons_write("starting kernel...\n"); + + /* fake an I/O base address: */ + ia64_setreg(_IA64_REG_AR_KR0, 0xffffc000000UL); + + bp = sys_fw_init(args, arglen); + + ssc(0, (long) kpath, 0, 0, SSC_LOAD_SYMBOLS); + + debug_break(); + jmp_to_kernel((unsigned long) bp, e_entry); + + cons_write("kernel returned!\n"); + ssc(-1, 0, 0, 0, SSC_EXIT); +} diff --git a/arch/ia64/hp/sim/boot/bootloader.lds b/arch/ia64/hp/sim/boot/bootloader.lds new file mode 100644 index 000000000000..69ae58531033 --- /dev/null +++ b/arch/ia64/hp/sim/boot/bootloader.lds @@ -0,0 +1,65 @@ +OUTPUT_FORMAT("elf64-ia64-little") +OUTPUT_ARCH(ia64) +ENTRY(_start) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = 0x100000; + + _text = .; + .text : { *(__ivt_section) *(.text) } + _etext = .; + + /* Global data */ + _data = .; + .rodata : { *(.rodata) *(.rodata.*) } + .data : { *(.data) *(.gnu.linkonce.d*) CONSTRUCTORS } + __gp = ALIGN (8) + 0x200000; + .got : { *(.got.plt) *(.got) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + _edata = .; + + _bss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : { *(.bss) *(COMMON) } + . = ALIGN(64 / 8); + _end = . ; + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + /* DWARF debug sections. + Symbols in the DWARF debugging sections are relative to the beginning + of the section so we begin them at 0. */ + /* DWARF 1 */ + .debug 0 : { *(.debug) } + .line 0 : { *(.line) } + /* GNU DWARF 1 extensions */ + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_sfnames 0 : { *(.debug_sfnames) } + /* DWARF 1.1 and DWARF 2 */ + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + /* DWARF 2 */ + .debug_info 0 : { *(.debug_info) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_line 0 : { *(.debug_line) } + .debug_frame 0 : { *(.debug_frame) } + .debug_str 0 : { *(.debug_str) } + .debug_loc 0 : { *(.debug_loc) } + .debug_macinfo 0 : { *(.debug_macinfo) } + /* SGI/MIPS DWARF 2 extensions */ + .debug_weaknames 0 : { *(.debug_weaknames) } + .debug_funcnames 0 : { *(.debug_funcnames) } + .debug_typenames 0 : { *(.debug_typenames) } + .debug_varnames 0 : { *(.debug_varnames) } + /* These must appear regardless of . */ +} diff --git a/arch/ia64/hp/sim/boot/fw-emu.c b/arch/ia64/hp/sim/boot/fw-emu.c new file mode 100644 index 000000000000..5c46928e3dc6 --- /dev/null +++ b/arch/ia64/hp/sim/boot/fw-emu.c @@ -0,0 +1,398 @@ +/* + * PAL & SAL emulation. + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + */ +#include <linux/config.h> + +#ifdef CONFIG_PCI +# include <linux/pci.h> +#endif + +#include <linux/efi.h> +#include <asm/io.h> +#include <asm/pal.h> +#include <asm/sal.h> + +#include "ssc.h" + +#define MB (1024*1024UL) + +#define SIMPLE_MEMMAP 1 + +#if SIMPLE_MEMMAP +# define NUM_MEM_DESCS 4 +#else +# define NUM_MEM_DESCS 16 +#endif + +static char fw_mem[( sizeof(struct ia64_boot_param) + + sizeof(efi_system_table_t) + + sizeof(efi_runtime_services_t) + + 1*sizeof(efi_config_table_t) + + sizeof(struct ia64_sal_systab) + + sizeof(struct ia64_sal_desc_entry_point) + + NUM_MEM_DESCS*(sizeof(efi_memory_desc_t)) + + 1024)] __attribute__ ((aligned (8))); + +#define SECS_PER_HOUR (60 * 60) +#define SECS_PER_DAY (SECS_PER_HOUR * 24) + +/* Compute the `struct tm' representation of *T, + offset OFFSET seconds east of UTC, + and store year, yday, mon, mday, wday, hour, min, sec into *TP. + Return nonzero if successful. */ +int +offtime (unsigned long t, efi_time_t *tp) +{ + const unsigned short int __mon_yday[2][13] = + { + /* Normal years. */ + { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365 }, + /* Leap years. */ + { 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 } + }; + long int days, rem, y; + const unsigned short int *ip; + + days = t / SECS_PER_DAY; + rem = t % SECS_PER_DAY; + while (rem < 0) { + rem += SECS_PER_DAY; + --days; + } + while (rem >= SECS_PER_DAY) { + rem -= SECS_PER_DAY; + ++days; + } + tp->hour = rem / SECS_PER_HOUR; + rem %= SECS_PER_HOUR; + tp->minute = rem / 60; + tp->second = rem % 60; + /* January 1, 1970 was a Thursday. */ + y = 1970; + +# define DIV(a, b) ((a) / (b) - ((a) % (b) < 0)) +# define LEAPS_THRU_END_OF(y) (DIV (y, 4) - DIV (y, 100) + DIV (y, 400)) +# define __isleap(year) \ + ((year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0)) + + while (days < 0 || days >= (__isleap (y) ? 366 : 365)) { + /* Guess a corrected year, assuming 365 days per year. */ + long int yg = y + days / 365 - (days % 365 < 0); + + /* Adjust DAYS and Y to match the guessed year. */ + days -= ((yg - y) * 365 + LEAPS_THRU_END_OF (yg - 1) + - LEAPS_THRU_END_OF (y - 1)); + y = yg; + } + tp->year = y; + ip = __mon_yday[__isleap(y)]; + for (y = 11; days < (long int) ip[y]; --y) + continue; + days -= ip[y]; + tp->month = y + 1; + tp->day = days + 1; + return 1; +} + +extern void pal_emulator_static (void); + +/* Macro to emulate SAL call using legacy IN and OUT calls to CF8, CFC etc.. */ + +#define BUILD_CMD(addr) ((0x80000000 | (addr)) & ~3) + +#define REG_OFFSET(addr) (0x00000000000000FF & (addr)) +#define DEVICE_FUNCTION(addr) (0x000000000000FF00 & (addr)) +#define BUS_NUMBER(addr) (0x0000000000FF0000 & (addr)) + +static efi_status_t +fw_efi_get_time (efi_time_t *tm, efi_time_cap_t *tc) +{ +#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) + struct { + int tv_sec; /* must be 32bits to work */ + int tv_usec; + } tv32bits; + + ssc((unsigned long) &tv32bits, 0, 0, 0, SSC_GET_TOD); + + memset(tm, 0, sizeof(*tm)); + offtime(tv32bits.tv_sec, tm); + + if (tc) + memset(tc, 0, sizeof(*tc)); +#else +# error Not implemented yet... +#endif + return EFI_SUCCESS; +} + +static void +efi_reset_system (int reset_type, efi_status_t status, unsigned long data_size, efi_char16_t *data) +{ +#if defined(CONFIG_IA64_HP_SIM) || defined(CONFIG_IA64_GENERIC) + ssc(status, 0, 0, 0, SSC_EXIT); +#else +# error Not implemented yet... +#endif +} + +static efi_status_t +efi_unimplemented (void) +{ + return EFI_UNSUPPORTED; +} + +static struct sal_ret_values +sal_emulator (long index, unsigned long in1, unsigned long in2, + unsigned long in3, unsigned long in4, unsigned long in5, + unsigned long in6, unsigned long in7) +{ + long r9 = 0; + long r10 = 0; + long r11 = 0; + long status; + + /* + * Don't do a "switch" here since that gives us code that + * isn't self-relocatable. + */ + status = 0; + if (index == SAL_FREQ_BASE) { + switch (in1) { + case SAL_FREQ_BASE_PLATFORM: + r9 = 200000000; + break; + + case SAL_FREQ_BASE_INTERVAL_TIMER: + /* + * Is this supposed to be the cr.itc frequency + * or something platform specific? The SAL + * doc ain't exactly clear on this... + */ + r9 = 700000000; + break; + + case SAL_FREQ_BASE_REALTIME_CLOCK: + r9 = 1; + break; + + default: + status = -1; + break; + } + } else if (index == SAL_SET_VECTORS) { + ; + } else if (index == SAL_GET_STATE_INFO) { + ; + } else if (index == SAL_GET_STATE_INFO_SIZE) { + ; + } else if (index == SAL_CLEAR_STATE_INFO) { + ; + } else if (index == SAL_MC_RENDEZ) { + ; + } else if (index == SAL_MC_SET_PARAMS) { + ; + } else if (index == SAL_CACHE_FLUSH) { + ; + } else if (index == SAL_CACHE_INIT) { + ; +#ifdef CONFIG_PCI + } else if (index == SAL_PCI_CONFIG_READ) { + /* + * in1 contains the PCI configuration address and in2 + * the size of the read. The value that is read is + * returned via the general register r9. + */ + outl(BUILD_CMD(in1), 0xCF8); + if (in2 == 1) /* Reading byte */ + r9 = inb(0xCFC + ((REG_OFFSET(in1) & 3))); + else if (in2 == 2) /* Reading word */ + r9 = inw(0xCFC + ((REG_OFFSET(in1) & 2))); + else /* Reading dword */ + r9 = inl(0xCFC); + status = PCIBIOS_SUCCESSFUL; + } else if (index == SAL_PCI_CONFIG_WRITE) { + /* + * in1 contains the PCI configuration address, in2 the + * size of the write, and in3 the actual value to be + * written out. + */ + outl(BUILD_CMD(in1), 0xCF8); + if (in2 == 1) /* Writing byte */ + outb(in3, 0xCFC + ((REG_OFFSET(in1) & 3))); + else if (in2 == 2) /* Writing word */ + outw(in3, 0xCFC + ((REG_OFFSET(in1) & 2))); + else /* Writing dword */ + outl(in3, 0xCFC); + status = PCIBIOS_SUCCESSFUL; +#endif /* CONFIG_PCI */ + } else if (index == SAL_UPDATE_PAL) { + ; + } else { + status = -1; + } + return ((struct sal_ret_values) {status, r9, r10, r11}); +} + + +/* + * This is here to work around a bug in egcs-1.1.1b that causes the + * compiler to crash (seems like a bug in the new alias analysis code. + */ +void * +id (long addr) +{ + return (void *) addr; +} + +struct ia64_boot_param * +sys_fw_init (const char *args, int arglen) +{ + efi_system_table_t *efi_systab; + efi_runtime_services_t *efi_runtime; + efi_config_table_t *efi_tables; + struct ia64_sal_systab *sal_systab; + efi_memory_desc_t *efi_memmap, *md; + unsigned long *pal_desc, *sal_desc; + struct ia64_sal_desc_entry_point *sal_ed; + struct ia64_boot_param *bp; + unsigned char checksum = 0; + char *cp, *cmd_line; + int i = 0; +# define MAKE_MD(typ, attr, start, end) \ + do { \ + md = efi_memmap + i++; \ + md->type = typ; \ + md->pad = 0; \ + md->phys_addr = start; \ + md->virt_addr = 0; \ + md->num_pages = (end - start) >> 12; \ + md->attribute = attr; \ + } while (0) + + memset(fw_mem, 0, sizeof(fw_mem)); + + pal_desc = (unsigned long *) &pal_emulator_static; + sal_desc = (unsigned long *) &sal_emulator; + + cp = fw_mem; + efi_systab = (void *) cp; cp += sizeof(*efi_systab); + efi_runtime = (void *) cp; cp += sizeof(*efi_runtime); + efi_tables = (void *) cp; cp += sizeof(*efi_tables); + sal_systab = (void *) cp; cp += sizeof(*sal_systab); + sal_ed = (void *) cp; cp += sizeof(*sal_ed); + efi_memmap = (void *) cp; cp += NUM_MEM_DESCS*sizeof(*efi_memmap); + bp = (void *) cp; cp += sizeof(*bp); + cmd_line = (void *) cp; + + if (args) { + if (arglen >= 1024) + arglen = 1023; + memcpy(cmd_line, args, arglen); + } else { + arglen = 0; + } + cmd_line[arglen] = '\0'; + + memset(efi_systab, 0, sizeof(efi_systab)); + efi_systab->hdr.signature = EFI_SYSTEM_TABLE_SIGNATURE; + efi_systab->hdr.revision = EFI_SYSTEM_TABLE_REVISION; + efi_systab->hdr.headersize = sizeof(efi_systab->hdr); + efi_systab->fw_vendor = __pa("H\0e\0w\0l\0e\0t\0t\0-\0P\0a\0c\0k\0a\0r\0d\0\0"); + efi_systab->fw_revision = 1; + efi_systab->runtime = (void *) __pa(efi_runtime); + efi_systab->nr_tables = 1; + efi_systab->tables = __pa(efi_tables); + + efi_runtime->hdr.signature = EFI_RUNTIME_SERVICES_SIGNATURE; + efi_runtime->hdr.revision = EFI_RUNTIME_SERVICES_REVISION; + efi_runtime->hdr.headersize = sizeof(efi_runtime->hdr); + efi_runtime->get_time = __pa(&fw_efi_get_time); + efi_runtime->set_time = __pa(&efi_unimplemented); + efi_runtime->get_wakeup_time = __pa(&efi_unimplemented); + efi_runtime->set_wakeup_time = __pa(&efi_unimplemented); + efi_runtime->set_virtual_address_map = __pa(&efi_unimplemented); + efi_runtime->get_variable = __pa(&efi_unimplemented); + efi_runtime->get_next_variable = __pa(&efi_unimplemented); + efi_runtime->set_variable = __pa(&efi_unimplemented); + efi_runtime->get_next_high_mono_count = __pa(&efi_unimplemented); + efi_runtime->reset_system = __pa(&efi_reset_system); + + efi_tables->guid = SAL_SYSTEM_TABLE_GUID; + efi_tables->table = __pa(sal_systab); + + /* fill in the SAL system table: */ + memcpy(sal_systab->signature, "SST_", 4); + sal_systab->size = sizeof(*sal_systab); + sal_systab->sal_rev_minor = 1; + sal_systab->sal_rev_major = 0; + sal_systab->entry_count = 1; + +#ifdef CONFIG_IA64_GENERIC + strcpy(sal_systab->oem_id, "Generic"); + strcpy(sal_systab->product_id, "IA-64 system"); +#endif + +#ifdef CONFIG_IA64_HP_SIM + strcpy(sal_systab->oem_id, "Hewlett-Packard"); + strcpy(sal_systab->product_id, "HP-simulator"); +#endif + +#ifdef CONFIG_IA64_SDV + strcpy(sal_systab->oem_id, "Intel"); + strcpy(sal_systab->product_id, "SDV"); +#endif + + /* fill in an entry point: */ + sal_ed->type = SAL_DESC_ENTRY_POINT; + sal_ed->pal_proc = __pa(pal_desc[0]); + sal_ed->sal_proc = __pa(sal_desc[0]); + sal_ed->gp = __pa(sal_desc[1]); + + for (cp = (char *) sal_systab; cp < (char *) efi_memmap; ++cp) + checksum += *cp; + + sal_systab->checksum = -checksum; + +#if SIMPLE_MEMMAP + /* simulate free memory at physical address zero */ + MAKE_MD(EFI_BOOT_SERVICES_DATA, EFI_MEMORY_WB, 0*MB, 1*MB); + MAKE_MD(EFI_PAL_CODE, EFI_MEMORY_WB, 1*MB, 2*MB); + MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 2*MB, 130*MB); + MAKE_MD(EFI_CONVENTIONAL_MEMORY, EFI_MEMORY_WB, 4096*MB, 4128*MB); +#else + MAKE_MD( 4, 0x9, 0x0000000000000000, 0x0000000000001000); + MAKE_MD( 7, 0x9, 0x0000000000001000, 0x000000000008a000); + MAKE_MD( 4, 0x9, 0x000000000008a000, 0x00000000000a0000); + MAKE_MD( 5, 0x8000000000000009, 0x00000000000c0000, 0x0000000000100000); + MAKE_MD( 7, 0x9, 0x0000000000100000, 0x0000000004400000); + MAKE_MD( 2, 0x9, 0x0000000004400000, 0x0000000004be5000); + MAKE_MD( 7, 0x9, 0x0000000004be5000, 0x000000007f77e000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007f77e000, 0x000000007fb94000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007fb94000, 0x000000007fb95000); + MAKE_MD( 6, 0x8000000000000009, 0x000000007fb95000, 0x000000007fc00000); + MAKE_MD(13, 0x8000000000000009, 0x000000007fc00000, 0x000000007fc3a000); + MAKE_MD( 7, 0x9, 0x000000007fc3a000, 0x000000007fea0000); + MAKE_MD( 5, 0x8000000000000009, 0x000000007fea0000, 0x000000007fea8000); + MAKE_MD( 7, 0x9, 0x000000007fea8000, 0x000000007feab000); + MAKE_MD( 5, 0x8000000000000009, 0x000000007feab000, 0x000000007ffff000); + MAKE_MD( 7, 0x9, 0x00000000ff400000, 0x0000000104000000); +#endif + + bp->efi_systab = __pa(&fw_mem); + bp->efi_memmap = __pa(efi_memmap); + bp->efi_memmap_size = NUM_MEM_DESCS*sizeof(efi_memory_desc_t); + bp->efi_memdesc_size = sizeof(efi_memory_desc_t); + bp->efi_memdesc_version = 1; + bp->command_line = __pa(cmd_line); + bp->console_info.num_cols = 80; + bp->console_info.num_rows = 25; + bp->console_info.orig_x = 0; + bp->console_info.orig_y = 24; + bp->fpswa = 0; + + return bp; +} diff --git a/arch/ia64/hp/sim/boot/ssc.h b/arch/ia64/hp/sim/boot/ssc.h new file mode 100644 index 000000000000..3b94c03e43a9 --- /dev/null +++ b/arch/ia64/hp/sim/boot/ssc.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 1998-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + */ +#ifndef ssc_h +#define ssc_h + +/* Simulator system calls: */ + +#define SSC_CONSOLE_INIT 20 +#define SSC_GETCHAR 21 +#define SSC_PUTCHAR 31 +#define SSC_OPEN 50 +#define SSC_CLOSE 51 +#define SSC_READ 52 +#define SSC_WRITE 53 +#define SSC_GET_COMPLETION 54 +#define SSC_WAIT_COMPLETION 55 +#define SSC_CONNECT_INTERRUPT 58 +#define SSC_GENERATE_INTERRUPT 59 +#define SSC_SET_PERIODIC_INTERRUPT 60 +#define SSC_GET_RTC 65 +#define SSC_EXIT 66 +#define SSC_LOAD_SYMBOLS 69 +#define SSC_GET_TOD 74 + +#define SSC_GET_ARGS 75 + +/* + * Simulator system call. + */ +extern long ssc (long arg0, long arg1, long arg2, long arg3, int nr); + +#endif /* ssc_h */ diff --git a/arch/ia64/hp/sim/hpsim.S b/arch/ia64/hp/sim/hpsim.S new file mode 100644 index 000000000000..ff16e8a857d1 --- /dev/null +++ b/arch/ia64/hp/sim/hpsim.S @@ -0,0 +1,10 @@ +#include <asm/asmmacro.h> + +/* + * Simulator system call. + */ +GLOBAL_ENTRY(ia64_ssc) + mov r15=r36 + break 0x80001 + br.ret.sptk.many rp +END(ia64_ssc) diff --git a/arch/ia64/hp/sim/hpsim_console.c b/arch/ia64/hp/sim/hpsim_console.c new file mode 100644 index 000000000000..5deff21e5877 --- /dev/null +++ b/arch/ia64/hp/sim/hpsim_console.c @@ -0,0 +1,65 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ +#include <linux/config.h> + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/tty.h> +#include <linux/kdev_t.h> +#include <linux/console.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/pal.h> +#include <asm/machvec.h> +#include <asm/pgtable.h> +#include <asm/sal.h> + +#include "hpsim_ssc.h" + +static int simcons_init (struct console *, char *); +static void simcons_write (struct console *, const char *, unsigned); +static struct tty_driver *simcons_console_device (struct console *, int *); + +struct console hpsim_cons = { + .name = "simcons", + .write = simcons_write, + .device = simcons_console_device, + .setup = simcons_init, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int +simcons_init (struct console *cons, char *options) +{ + return 0; +} + +static void +simcons_write (struct console *cons, const char *buf, unsigned count) +{ + unsigned long ch; + + while (count-- > 0) { + ch = *buf++; + ia64_ssc(ch, 0, 0, 0, SSC_PUTCHAR); + if (ch == '\n') + ia64_ssc('\r', 0, 0, 0, SSC_PUTCHAR); + } +} + +static struct tty_driver *simcons_console_device (struct console *c, int *index) +{ + extern struct tty_driver *hp_simserial_driver; + *index = c->index; + return hp_simserial_driver; +} diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c new file mode 100644 index 000000000000..c0d25a2a3e9c --- /dev/null +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -0,0 +1,51 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998-2001 Hewlett-Packard Co + * Copyright (C) 1998-2001 David Mosberger-Tang <davidm@hpl.hp.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/irq.h> + +static unsigned int +hpsim_irq_startup (unsigned int irq) +{ + return 0; +} + +static void +hpsim_irq_noop (unsigned int irq) +{ +} + +static void +hpsim_set_affinity_noop (unsigned int a, cpumask_t b) +{ +} + +static struct hw_interrupt_type irq_type_hp_sim = { + .typename = "hpsim", + .startup = hpsim_irq_startup, + .shutdown = hpsim_irq_noop, + .enable = hpsim_irq_noop, + .disable = hpsim_irq_noop, + .ack = hpsim_irq_noop, + .end = hpsim_irq_noop, + .set_affinity = hpsim_set_affinity_noop, +}; + +void __init +hpsim_irq_init (void) +{ + irq_desc_t *idesc; + int i; + + for (i = 0; i < NR_IRQS; ++i) { + idesc = irq_descp(i); + if (idesc->handler == &no_irq_type) + idesc->handler = &irq_type_hp_sim; + } +} diff --git a/arch/ia64/hp/sim/hpsim_machvec.c b/arch/ia64/hp/sim/hpsim_machvec.c new file mode 100644 index 000000000000..c21419359185 --- /dev/null +++ b/arch/ia64/hp/sim/hpsim_machvec.c @@ -0,0 +1,3 @@ +#define MACHVEC_PLATFORM_NAME hpsim +#define MACHVEC_PLATFORM_HEADER <asm/machvec_hpsim.h> +#include <asm/machvec_init.h> diff --git a/arch/ia64/hp/sim/hpsim_setup.c b/arch/ia64/hp/sim/hpsim_setup.c new file mode 100644 index 000000000000..694fc86bfbd5 --- /dev/null +++ b/arch/ia64/hp/sim/hpsim_setup.c @@ -0,0 +1,52 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ +#include <linux/config.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/kdev_t.h> +#include <linux/kernel.h> +#include <linux/major.h> +#include <linux/param.h> +#include <linux/root_dev.h> +#include <linux/string.h> +#include <linux/types.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/pal.h> +#include <asm/machvec.h> +#include <asm/pgtable.h> +#include <asm/sal.h> + +#include "hpsim_ssc.h" + +void +ia64_ssc_connect_irq (long intr, long irq) +{ + ia64_ssc(intr, irq, 0, 0, SSC_CONNECT_INTERRUPT); +} + +void +ia64_ctl_trace (long on) +{ + ia64_ssc(on, 0, 0, 0, SSC_CTL_TRACE); +} + +void __init +hpsim_setup (char **cmdline_p) +{ + ROOT_DEV = Root_SDA1; /* default to first SCSI drive */ + +#ifdef CONFIG_HP_SIMSERIAL_CONSOLE + { + extern struct console hpsim_cons; + if (ia64_platform_is("hpsim")) + register_console(&hpsim_cons); + } +#endif +} diff --git a/arch/ia64/hp/sim/hpsim_ssc.h b/arch/ia64/hp/sim/hpsim_ssc.h new file mode 100644 index 000000000000..bfa3906274b3 --- /dev/null +++ b/arch/ia64/hp/sim/hpsim_ssc.h @@ -0,0 +1,36 @@ +/* + * Platform dependent support for HP simulator. + * + * Copyright (C) 1998, 1999 Hewlett-Packard Co + * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 Vijay Chander <vijay@engr.sgi.com> + */ +#ifndef _IA64_PLATFORM_HPSIM_SSC_H +#define _IA64_PLATFORM_HPSIM_SSC_H + +/* Simulator system calls: */ + +#define SSC_CONSOLE_INIT 20 +#define SSC_GETCHAR 21 +#define SSC_PUTCHAR 31 +#define SSC_CONNECT_INTERRUPT 58 +#define SSC_GENERATE_INTERRUPT 59 +#define SSC_SET_PERIODIC_INTERRUPT 60 +#define SSC_GET_RTC 65 +#define SSC_EXIT 66 +#define SSC_LOAD_SYMBOLS 69 +#define SSC_GET_TOD 74 +#define SSC_CTL_TRACE 76 + +#define SSC_NETDEV_PROBE 100 +#define SSC_NETDEV_SEND 101 +#define SSC_NETDEV_RECV 102 +#define SSC_NETDEV_ATTACH 103 +#define SSC_NETDEV_DETACH 104 + +/* + * Simulator system call. + */ +extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); + +#endif /* _IA64_PLATFORM_HPSIM_SSC_H */ diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c new file mode 100644 index 000000000000..ae84a1018a89 --- /dev/null +++ b/arch/ia64/hp/sim/simeth.c @@ -0,0 +1,530 @@ +/* + * Simulated Ethernet Driver + * + * Copyright (C) 1999-2001, 2003 Hewlett-Packard Co + * Stephane Eranian <eranian@hpl.hp.com> + */ +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/in.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/inetdevice.h> +#include <linux/if_ether.h> +#include <linux/if_arp.h> +#include <linux/skbuff.h> +#include <linux/notifier.h> +#include <linux/bitops.h> +#include <asm/system.h> +#include <asm/irq.h> + +#define SIMETH_RECV_MAX 10 + +/* + * Maximum possible received frame for Ethernet. + * We preallocate an sk_buff of that size to avoid costly + * memcpy for temporary buffer into sk_buff. We do basically + * what's done in other drivers, like eepro with a ring. + * The difference is, of course, that we don't have real DMA !!! + */ +#define SIMETH_FRAME_SIZE ETH_FRAME_LEN + + +#define SSC_NETDEV_PROBE 100 +#define SSC_NETDEV_SEND 101 +#define SSC_NETDEV_RECV 102 +#define SSC_NETDEV_ATTACH 103 +#define SSC_NETDEV_DETACH 104 + +#define NETWORK_INTR 8 + +struct simeth_local { + struct net_device_stats stats; + int simfd; /* descriptor in the simulator */ +}; + +static int simeth_probe1(void); +static int simeth_open(struct net_device *dev); +static int simeth_close(struct net_device *dev); +static int simeth_tx(struct sk_buff *skb, struct net_device *dev); +static int simeth_rx(struct net_device *dev); +static struct net_device_stats *simeth_get_stats(struct net_device *dev); +static irqreturn_t simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static void set_multicast_list(struct net_device *dev); +static int simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr); + +static char *simeth_version="0.3"; + +/* + * This variable is used to establish a mapping between the Linux/ia64 kernel + * and the host linux kernel. + * + * As of today, we support only one card, even though most of the code + * is ready for many more. The mapping is then: + * linux/ia64 -> linux/x86 + * eth0 -> eth1 + * + * In the future, we some string operations, we could easily support up + * to 10 cards (0-9). + * + * The default mapping can be changed on the kernel command line by + * specifying simeth=ethX (or whatever string you want). + */ +static char *simeth_device="eth0"; /* default host interface to use */ + + + +static volatile unsigned int card_count; /* how many cards "found" so far */ +static int simeth_debug; /* set to 1 to get debug information */ + +/* + * Used to catch IFF_UP & IFF_DOWN events + */ +static struct notifier_block simeth_dev_notifier = { + simeth_device_event, + 0 +}; + + +/* + * Function used when using a kernel command line option. + * + * Format: simeth=interface_name (like eth0) + */ +static int __init +simeth_setup(char *str) +{ + simeth_device = str; + return 1; +} + +__setup("simeth=", simeth_setup); + +/* + * Function used to probe for simeth devices when not installed + * as a loadable module + */ + +int __init +simeth_probe (void) +{ + int r; + + printk(KERN_INFO "simeth: v%s\n", simeth_version); + + r = simeth_probe1(); + + if (r == 0) register_netdevice_notifier(&simeth_dev_notifier); + + return r; +} + +extern long ia64_ssc (long, long, long, long, int); +extern void ia64_ssc_connect_irq (long intr, long irq); + +static inline int +netdev_probe(char *name, unsigned char *ether) +{ + return ia64_ssc(__pa(name), __pa(ether), 0,0, SSC_NETDEV_PROBE); +} + + +static inline int +netdev_connect(int irq) +{ + /* XXX Fix me + * this does not support multiple cards + * also no return value + */ + ia64_ssc_connect_irq(NETWORK_INTR, irq); + return 0; +} + +static inline int +netdev_attach(int fd, int irq, unsigned int ipaddr) +{ + /* this puts the host interface in the right mode (start interrupting) */ + return ia64_ssc(fd, ipaddr, 0,0, SSC_NETDEV_ATTACH); +} + + +static inline int +netdev_detach(int fd) +{ + /* + * inactivate the host interface (don't interrupt anymore) */ + return ia64_ssc(fd, 0,0,0, SSC_NETDEV_DETACH); +} + +static inline int +netdev_send(int fd, unsigned char *buf, unsigned int len) +{ + return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_SEND); +} + +static inline int +netdev_read(int fd, unsigned char *buf, unsigned int len) +{ + return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV); +} + +/* + * Function shared with module code, so cannot be in init section + * + * So far this function "detects" only one card (test_&_set) but could + * be extended easily. + * + * Return: + * - -ENODEV is no device found + * - -ENOMEM is no more memory + * - 0 otherwise + */ +static int +simeth_probe1(void) +{ + unsigned char mac_addr[ETH_ALEN]; + struct simeth_local *local; + struct net_device *dev; + int fd, i, err; + + /* + * XXX Fix me + * let's support just one card for now + */ + if (test_and_set_bit(0, &card_count)) + return -ENODEV; + + /* + * check with the simulator for the device + */ + fd = netdev_probe(simeth_device, mac_addr); + if (fd == -1) + return -ENODEV; + + dev = alloc_etherdev(sizeof(struct simeth_local)); + if (!dev) + return -ENOMEM; + + memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr)); + + local = dev->priv; + local->simfd = fd; /* keep track of underlying file descriptor */ + + dev->open = simeth_open; + dev->stop = simeth_close; + dev->hard_start_xmit = simeth_tx; + dev->get_stats = simeth_get_stats; + dev->set_multicast_list = set_multicast_list; /* no yet used */ + + err = register_netdev(dev); + if (err) { + free_netdev(dev); + return err; + } + + dev->irq = assign_irq_vector(AUTO_ASSIGN); + + /* + * attach the interrupt in the simulator, this does enable interrupts + * until a netdev_attach() is called + */ + netdev_connect(dev->irq); + + printk(KERN_INFO "%s: hosteth=%s simfd=%d, HwAddr", + dev->name, simeth_device, local->simfd); + for(i = 0; i < ETH_ALEN; i++) { + printk(" %2.2x", dev->dev_addr[i]); + } + printk(", IRQ %d\n", dev->irq); + + return 0; +} + +/* + * actually binds the device to an interrupt vector + */ +static int +simeth_open(struct net_device *dev) +{ + if (request_irq(dev->irq, simeth_interrupt, 0, "simeth", dev)) { + printk(KERN_WARNING "simeth: unable to get IRQ %d.\n", dev->irq); + return -EAGAIN; + } + + netif_start_queue(dev); + + return 0; +} + +/* copied from lapbether.c */ +static __inline__ int dev_is_ethdev(struct net_device *dev) +{ + return ( dev->type == ARPHRD_ETHER && strncmp(dev->name, "dummy", 5)); +} + + +/* + * Handler for IFF_UP or IFF_DOWN + * + * The reason for that is that we don't want to be interrupted when the + * interface is down. There is no way to unconnect in the simualtor. Instead + * we use this function to shutdown packet processing in the frame filter + * in the simulator. Thus no interrupts are generated + * + * + * That's also the place where we pass the IP address of this device to the + * simulator so that that we can start filtering packets for it + * + * There may be a better way of doing this, but I don't know which yet. + */ +static int +simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr) +{ + struct net_device *dev = ptr; + struct simeth_local *local; + struct in_device *in_dev; + struct in_ifaddr **ifap = NULL; + struct in_ifaddr *ifa = NULL; + int r; + + + if ( ! dev ) { + printk(KERN_WARNING "simeth_device_event dev=0\n"); + return NOTIFY_DONE; + } + + if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE; + + /* + * Check whether or not it's for an ethernet device + * + * XXX Fixme: This works only as long as we support one + * type of ethernet device. + */ + if ( !dev_is_ethdev(dev) ) return NOTIFY_DONE; + + if ((in_dev=dev->ip_ptr) != NULL) { + for (ifap=&in_dev->ifa_list; (ifa=*ifap) != NULL; ifap=&ifa->ifa_next) + if (strcmp(dev->name, ifa->ifa_label) == 0) break; + } + if ( ifa == NULL ) { + printk(KERN_ERR "simeth_open: can't find device %s's ifa\n", dev->name); + return NOTIFY_DONE; + } + + printk(KERN_INFO "simeth_device_event: %s ipaddr=0x%x\n", + dev->name, htonl(ifa->ifa_local)); + + /* + * XXX Fix me + * if the device was up, and we're simply reconfiguring it, not sure + * we get DOWN then UP. + */ + + local = dev->priv; + /* now do it for real */ + r = event == NETDEV_UP ? + netdev_attach(local->simfd, dev->irq, htonl(ifa->ifa_local)): + netdev_detach(local->simfd); + + printk(KERN_INFO "simeth: netdev_attach/detach: event=%s ->%d\n", + event == NETDEV_UP ? "attach":"detach", r); + + return NOTIFY_DONE; +} + +static int +simeth_close(struct net_device *dev) +{ + netif_stop_queue(dev); + + free_irq(dev->irq, dev); + + return 0; +} + +/* + * Only used for debug + */ +static void +frame_print(unsigned char *from, unsigned char *frame, int len) +{ + int i; + + printk("%s: (%d) %02x", from, len, frame[0] & 0xff); + for(i=1; i < 6; i++ ) { + printk(":%02x", frame[i] &0xff); + } + printk(" %2x", frame[6] &0xff); + for(i=7; i < 12; i++ ) { + printk(":%02x", frame[i] &0xff); + } + printk(" [%02x%02x]\n", frame[12], frame[13]); + + for(i=14; i < len; i++ ) { + printk("%02x ", frame[i] &0xff); + if ( (i%10)==0) printk("\n"); + } + printk("\n"); +} + + +/* + * Function used to transmit of frame, very last one on the path before + * going to the simulator. + */ +static int +simeth_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct simeth_local *local = dev->priv; + +#if 0 + /* ensure we have at least ETH_ZLEN bytes (min frame size) */ + unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + /* Where do the extra padding bytes comes from inthe skbuff ? */ +#else + /* the real driver in the host system is going to take care of that + * or maybe it's the NIC itself. + */ + unsigned int length = skb->len; +#endif + + local->stats.tx_bytes += skb->len; + local->stats.tx_packets++; + + + if (simeth_debug > 5) frame_print("simeth_tx", skb->data, length); + + netdev_send(local->simfd, skb->data, length); + + /* + * we are synchronous on write, so we don't simulate a + * trasnmit complete interrupt, thus we don't need to arm a tx + */ + + dev_kfree_skb(skb); + return 0; +} + +static inline struct sk_buff * +make_new_skb(struct net_device *dev) +{ + struct sk_buff *nskb; + + /* + * The +2 is used to make sure that the IP header is nicely + * aligned (on 4byte boundary I assume 14+2=16) + */ + nskb = dev_alloc_skb(SIMETH_FRAME_SIZE + 2); + if ( nskb == NULL ) { + printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); + return NULL; + } + nskb->dev = dev; + + skb_reserve(nskb, 2); /* Align IP on 16 byte boundaries */ + + skb_put(nskb,SIMETH_FRAME_SIZE); + + return nskb; +} + +/* + * called from interrupt handler to process a received frame + */ +static int +simeth_rx(struct net_device *dev) +{ + struct simeth_local *local; + struct sk_buff *skb; + int len; + int rcv_count = SIMETH_RECV_MAX; + + local = dev->priv; + /* + * the loop concept has been borrowed from other drivers + * looks to me like it's a throttling thing to avoid pushing to many + * packets at one time into the stack. Making sure we can process them + * upstream and make forward progress overall + */ + do { + if ( (skb=make_new_skb(dev)) == NULL ) { + printk(KERN_NOTICE "%s: memory squeeze. dropping packet.\n", dev->name); + local->stats.rx_dropped++; + return 0; + } + /* + * Read only one frame at a time + */ + len = netdev_read(local->simfd, skb->data, SIMETH_FRAME_SIZE); + if ( len == 0 ) { + if ( simeth_debug > 0 ) printk(KERN_WARNING "%s: count=%d netdev_read=0\n", + dev->name, SIMETH_RECV_MAX-rcv_count); + break; + } +#if 0 + /* + * XXX Fix me + * Should really do a csum+copy here + */ + memcpy(skb->data, frame, len); +#endif + skb->protocol = eth_type_trans(skb, dev); + + if ( simeth_debug > 6 ) frame_print("simeth_rx", skb->data, len); + + /* + * push the packet up & trigger software interrupt + */ + netif_rx(skb); + + local->stats.rx_packets++; + local->stats.rx_bytes += len; + + } while ( --rcv_count ); + + return len; /* 0 = nothing left to read, otherwise, we can try again */ +} + +/* + * Interrupt handler (Yes, we can do it too !!!) + */ +static irqreturn_t +simeth_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct net_device *dev = dev_id; + + if ( dev == NULL ) { + printk(KERN_WARNING "simeth: irq %d for unknown device\n", irq); + return IRQ_NONE; + } + + /* + * very simple loop because we get interrupts only when receiving + */ + while (simeth_rx(dev)); + return IRQ_HANDLED; +} + +static struct net_device_stats * +simeth_get_stats(struct net_device *dev) +{ + struct simeth_local *local = dev->priv; + + return &local->stats; +} + +/* fake multicast ability */ +static void +set_multicast_list(struct net_device *dev) +{ + printk(KERN_WARNING "%s: set_multicast_list called\n", dev->name); +} + +__initcall(simeth_probe); diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c new file mode 100644 index 000000000000..56405dbfd739 --- /dev/null +++ b/arch/ia64/hp/sim/simscsi.c @@ -0,0 +1,404 @@ +/* + * Simulated SCSI driver. + * + * Copyright (C) 1999, 2001-2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Stephane Eranian <eranian@hpl.hp.com> + * + * 02/01/15 David Mosberger Updated for v2.5.1 + * 99/12/18 David Mosberger Added support for READ10/WRITE10 needed by linux v2.3.33 + */ +#include <linux/blkdev.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <asm/irq.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> + +#define DEBUG_SIMSCSI 0 + +#define SIMSCSI_REQ_QUEUE_LEN 64 +#define DEFAULT_SIMSCSI_ROOT "/var/ski-disks/sd" + +/* Simulator system calls: */ + +#define SSC_OPEN 50 +#define SSC_CLOSE 51 +#define SSC_READ 52 +#define SSC_WRITE 53 +#define SSC_GET_COMPLETION 54 +#define SSC_WAIT_COMPLETION 55 + +#define SSC_WRITE_ACCESS 2 +#define SSC_READ_ACCESS 1 + +#if DEBUG_SIMSCSI + int simscsi_debug; +# define DBG simscsi_debug +#else +# define DBG 0 +#endif + +static struct Scsi_Host *host; + +static void simscsi_interrupt (unsigned long val); +static DECLARE_TASKLET(simscsi_tasklet, simscsi_interrupt, 0); + +struct disk_req { + unsigned long addr; + unsigned len; +}; + +struct disk_stat { + int fd; + unsigned count; +}; + +extern long ia64_ssc (long arg0, long arg1, long arg2, long arg3, int nr); + +static int desc[16] = { + -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static struct queue_entry { + struct scsi_cmnd *sc; +} queue[SIMSCSI_REQ_QUEUE_LEN]; + +static int rd, wr; +static atomic_t num_reqs = ATOMIC_INIT(0); + +/* base name for default disks */ +static char *simscsi_root = DEFAULT_SIMSCSI_ROOT; + +#define MAX_ROOT_LEN 128 + +/* + * used to setup a new base for disk images + * to use /foo/bar/disk[a-z] as disk images + * you have to specify simscsi=/foo/bar/disk on the command line + */ +static int __init +simscsi_setup (char *s) +{ + /* XXX Fix me we may need to strcpy() ? */ + if (strlen(s) > MAX_ROOT_LEN) { + printk(KERN_ERR "simscsi_setup: prefix too long---using default %s\n", + simscsi_root); + } + simscsi_root = s; + return 1; +} + +__setup("simscsi=", simscsi_setup); + +static void +simscsi_interrupt (unsigned long val) +{ + struct scsi_cmnd *sc; + + while ((sc = queue[rd].sc) != 0) { + atomic_dec(&num_reqs); + queue[rd].sc = 0; + if (DBG) + printk("simscsi_interrupt: done with %ld\n", sc->serial_number); + (*sc->scsi_done)(sc); + rd = (rd + 1) % SIMSCSI_REQ_QUEUE_LEN; + } +} + +static int +simscsi_biosparam (struct scsi_device *sdev, struct block_device *n, + sector_t capacity, int ip[]) +{ + ip[0] = 64; /* heads */ + ip[1] = 32; /* sectors */ + ip[2] = capacity >> 11; /* cylinders */ + return 0; +} + +static void +simscsi_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset, unsigned long len) +{ + struct disk_stat stat; + struct disk_req req; + + req.addr = __pa(sc->request_buffer); + req.len = len; /* # of bytes to transfer */ + + if (sc->request_bufflen < req.len) + return; + + stat.fd = desc[sc->device->id]; + if (DBG) + printk("simscsi_%s @ %lx (off %lx)\n", + mode == SSC_READ ? "read":"write", req.addr, offset); + ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); + ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); + + if (stat.count == req.len) { + sc->result = GOOD; + } else { + sc->result = DID_ERROR << 16; + } +} + +static void +simscsi_sg_readwrite (struct scsi_cmnd *sc, int mode, unsigned long offset) +{ + int list_len = sc->use_sg; + struct scatterlist *sl = (struct scatterlist *)sc->buffer; + struct disk_stat stat; + struct disk_req req; + + stat.fd = desc[sc->device->id]; + + while (list_len) { + req.addr = __pa(page_address(sl->page) + sl->offset); + req.len = sl->length; + if (DBG) + printk("simscsi_sg_%s @ %lx (off %lx) use_sg=%d len=%d\n", + mode == SSC_READ ? "read":"write", req.addr, offset, + list_len, sl->length); + ia64_ssc(stat.fd, 1, __pa(&req), offset, mode); + ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); + + /* should not happen in our case */ + if (stat.count != req.len) { + sc->result = DID_ERROR << 16; + return; + } + offset += sl->length; + sl++; + list_len--; + } + sc->result = GOOD; +} + +/* + * function handling both READ_6/WRITE_6 (non-scatter/gather mode) + * commands. + * Added 02/26/99 S.Eranian + */ +static void +simscsi_readwrite6 (struct scsi_cmnd *sc, int mode) +{ + unsigned long offset; + + offset = (((sc->cmnd[1] & 0x1f) << 16) | (sc->cmnd[2] << 8) | sc->cmnd[3])*512; + if (sc->use_sg > 0) + simscsi_sg_readwrite(sc, mode, offset); + else + simscsi_readwrite(sc, mode, offset, sc->cmnd[4]*512); +} + +static size_t +simscsi_get_disk_size (int fd) +{ + struct disk_stat stat; + size_t bit, sectors = 0; + struct disk_req req; + char buf[512]; + + /* + * This is a bit kludgey: the simulator doesn't provide a direct way of determining + * the disk size, so we do a binary search, assuming a maximum disk size of 4GB. + */ + for (bit = (4UL << 30)/512; bit != 0; bit >>= 1) { + req.addr = __pa(&buf); + req.len = sizeof(buf); + ia64_ssc(fd, 1, __pa(&req), ((sectors | bit) - 1)*512, SSC_READ); + stat.fd = fd; + ia64_ssc(__pa(&stat), 0, 0, 0, SSC_WAIT_COMPLETION); + if (stat.count == sizeof(buf)) + sectors |= bit; + } + return sectors - 1; /* return last valid sector number */ +} + +static void +simscsi_readwrite10 (struct scsi_cmnd *sc, int mode) +{ + unsigned long offset; + + offset = ( (sc->cmnd[2] << 24) | (sc->cmnd[3] << 16) + | (sc->cmnd[4] << 8) | (sc->cmnd[5] << 0))*512; + if (sc->use_sg > 0) + simscsi_sg_readwrite(sc, mode, offset); + else + simscsi_readwrite(sc, mode, offset, ((sc->cmnd[7] << 8) | sc->cmnd[8])*512); +} + +static int +simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) +{ + unsigned int target_id = sc->device->id; + char fname[MAX_ROOT_LEN+16]; + size_t disk_size; + char *buf; +#if DEBUG_SIMSCSI + register long sp asm ("sp"); + + if (DBG) + printk("simscsi_queuecommand: target=%d,cmnd=%u,sc=%lu,sp=%lx,done=%p\n", + target_id, sc->cmnd[0], sc->serial_number, sp, done); +#endif + + sc->result = DID_BAD_TARGET << 16; + sc->scsi_done = done; + if (target_id <= 15 && sc->device->lun == 0) { + switch (sc->cmnd[0]) { + case INQUIRY: + if (sc->request_bufflen < 35) { + break; + } + sprintf (fname, "%s%c", simscsi_root, 'a' + target_id); + desc[target_id] = ia64_ssc(__pa(fname), SSC_READ_ACCESS|SSC_WRITE_ACCESS, + 0, 0, SSC_OPEN); + if (desc[target_id] < 0) { + /* disk doesn't exist... */ + break; + } + buf = sc->request_buffer; + buf[0] = 0; /* magnetic disk */ + buf[1] = 0; /* not a removable medium */ + buf[2] = 2; /* SCSI-2 compliant device */ + buf[3] = 2; /* SCSI-2 response data format */ + buf[4] = 31; /* additional length (bytes) */ + buf[5] = 0; /* reserved */ + buf[6] = 0; /* reserved */ + buf[7] = 0; /* various flags */ + memcpy(buf + 8, "HP SIMULATED DISK 0.00", 28); + sc->result = GOOD; + break; + + case TEST_UNIT_READY: + sc->result = GOOD; + break; + + case READ_6: + if (desc[target_id] < 0 ) + break; + simscsi_readwrite6(sc, SSC_READ); + break; + + case READ_10: + if (desc[target_id] < 0 ) + break; + simscsi_readwrite10(sc, SSC_READ); + break; + + case WRITE_6: + if (desc[target_id] < 0) + break; + simscsi_readwrite6(sc, SSC_WRITE); + break; + + case WRITE_10: + if (desc[target_id] < 0) + break; + simscsi_readwrite10(sc, SSC_WRITE); + break; + + + case READ_CAPACITY: + if (desc[target_id] < 0 || sc->request_bufflen < 8) { + break; + } + buf = sc->request_buffer; + + disk_size = simscsi_get_disk_size(desc[target_id]); + + /* pretend to be a 1GB disk (partition table contains real stuff): */ + buf[0] = (disk_size >> 24) & 0xff; + buf[1] = (disk_size >> 16) & 0xff; + buf[2] = (disk_size >> 8) & 0xff; + buf[3] = (disk_size >> 0) & 0xff; + /* set block size of 512 bytes: */ + buf[4] = 0; + buf[5] = 0; + buf[6] = 2; + buf[7] = 0; + sc->result = GOOD; + break; + + case MODE_SENSE: + case MODE_SENSE_10: + /* sd.c uses this to determine whether disk does write-caching. */ + memset(sc->request_buffer, 0, 128); + sc->result = GOOD; + break; + + case START_STOP: + printk(KERN_ERR "START_STOP\n"); + break; + + default: + panic("simscsi: unknown SCSI command %u\n", sc->cmnd[0]); + } + } + if (sc->result == DID_BAD_TARGET) { + sc->result |= DRIVER_SENSE << 24; + sc->sense_buffer[0] = 0x70; + sc->sense_buffer[2] = 0x00; + } + if (atomic_read(&num_reqs) >= SIMSCSI_REQ_QUEUE_LEN) { + panic("Attempt to queue command while command is pending!!"); + } + atomic_inc(&num_reqs); + queue[wr].sc = sc; + wr = (wr + 1) % SIMSCSI_REQ_QUEUE_LEN; + + tasklet_schedule(&simscsi_tasklet); + return 0; +} + +static int +simscsi_host_reset (struct scsi_cmnd *sc) +{ + printk(KERN_ERR "simscsi_host_reset: not implemented\n"); + return 0; +} + +static struct scsi_host_template driver_template = { + .name = "simulated SCSI host adapter", + .proc_name = "simscsi", + .queuecommand = simscsi_queuecommand, + .eh_host_reset_handler = simscsi_host_reset, + .bios_param = simscsi_biosparam, + .can_queue = SIMSCSI_REQ_QUEUE_LEN, + .this_id = -1, + .sg_tablesize = SG_ALL, + .max_sectors = 1024, + .cmd_per_lun = SIMSCSI_REQ_QUEUE_LEN, + .use_clustering = DISABLE_CLUSTERING, +}; + +static int __init +simscsi_init(void) +{ + int error; + + host = scsi_host_alloc(&driver_template, 0); + if (!host) + return -ENOMEM; + + error = scsi_add_host(host, NULL); + if (!error) + scsi_scan_host(host); + return error; +} + +static void __exit +simscsi_exit(void) +{ + scsi_remove_host(host); + scsi_host_put(host); +} + +module_init(simscsi_init); +module_exit(simscsi_exit); diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c new file mode 100644 index 000000000000..786e70718ce4 --- /dev/null +++ b/arch/ia64/hp/sim/simserial.c @@ -0,0 +1,1032 @@ +/* + * Simulated Serial Driver (fake serial) + * + * This driver is mostly used for bringup purposes and will go away. + * It has a strong dependency on the system console. All outputs + * are rerouted to the same facility as the one used by printk which, in our + * case means sys_sim.c console (goes via the simulator). The code hereafter + * is completely leveraged from the serial.c driver. + * + * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co + * Stephane Eranian <eranian@hpl.hp.com> + * David Mosberger-Tang <davidm@hpl.hp.com> + * + * 02/04/00 D. Mosberger Merged in serial.c bug fixes in rs_close(). + * 02/25/00 D. Mosberger Synced up with 2.3.99pre-5 version of serial.c. + * 07/30/02 D. Mosberger Replace sti()/cli() with explicit spinlocks & local irq masking + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/major.h> +#include <linux/fcntl.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/console.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/serialP.h> + +#include <asm/irq.h> +#include <asm/hw_irq.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_KDB +# include <linux/kdb.h> +#endif + +#undef SIMSERIAL_DEBUG /* define this to get some debug information */ + +#define KEYBOARD_INTR 3 /* must match with simulator! */ + +#define NR_PORTS 1 /* only one port for now */ +#define SERIAL_INLINE 1 + +#ifdef SERIAL_INLINE +#define _INLINE_ inline +#endif + +#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT) + +#define SSC_GETCHAR 21 + +extern long ia64_ssc (long, long, long, long, int); +extern void ia64_ssc_connect_irq (long intr, long irq); + +static char *serial_name = "SimSerial driver"; +static char *serial_version = "0.6"; + +/* + * This has been extracted from asm/serial.h. We need one eventually but + * I don't know exactly what we're going to put in it so just fake one + * for now. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +/* + * Most of the values here are meaningless to this particular driver. + * However some values must be preserved for the code (leveraged from serial.c + * to work correctly). + * port must not be 0 + * type must not be UNKNOWN + * So I picked arbitrary (guess from where?) values instead + */ +static struct serial_state rs_table[NR_PORTS]={ + /* UART CLK PORT IRQ FLAGS */ + { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 } /* ttyS0 */ +}; + +/* + * Just for the fun of it ! + */ +static struct serial_uart_config uart_config[] = { + { "unknown", 1, 0 }, + { "8250", 1, 0 }, + { "16450", 1, 0 }, + { "16550", 1, 0 }, + { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO }, + { "cirrus", 1, 0 }, + { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH }, + { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | + UART_STARTECH }, + { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO}, + { 0, 0} +}; + +struct tty_driver *hp_simserial_driver; + +static struct async_struct *IRQ_ports[NR_IRQS]; + +static struct console *console; + +static unsigned char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); + +extern struct console *console_drivers; /* from kernel/printk.c */ + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ +#ifdef SIMSERIAL_DEBUG + printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n", + tty->stopped, tty->hw_stopped, tty->flow_stopped); +#endif + +} + +static void rs_start(struct tty_struct *tty) +{ +#if SIMSERIAL_DEBUG + printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n", + tty->stopped, tty->hw_stopped, tty->flow_stopped); +#endif +} + +static void receive_chars(struct tty_struct *tty, struct pt_regs *regs) +{ + unsigned char ch; + static unsigned char seen_esc = 0; + + while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) { + if ( ch == 27 && seen_esc == 0 ) { + seen_esc = 1; + continue; + } else { + if ( seen_esc==1 && ch == 'O' ) { + seen_esc = 2; + continue; + } else if ( seen_esc == 2 ) { + if ( ch == 'P' ) show_state(); /* F1 key */ +#ifdef CONFIG_KDB + if ( ch == 'S' ) + kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs); +#endif + + seen_esc = 0; + continue; + } + } + seen_esc = 0; + if (tty->flip.count >= TTY_FLIPBUF_SIZE) break; + + *tty->flip.char_buf_ptr = ch; + + *tty->flip.flag_buf_ptr = 0; + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + tty_flip_buffer_push(tty); +} + +/* + * This is the serial driver's interrupt routine for a single port + */ +static irqreturn_t rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs) +{ + struct async_struct * info; + + /* + * I don't know exactly why they don't use the dev_id opaque data + * pointer instead of this extra lookup table + */ + info = IRQ_ports[irq]; + if (!info || !info->tty) { + printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info); + return IRQ_NONE; + } + /* + * pretty simple in our case, because we only get interrupts + * on inbound traffic + */ + receive_chars(info->tty, regs); + return IRQ_HANDLED; +} + +/* + * ------------------------------------------------------------------- + * Here ends the serial interrupt routines. + * ------------------------------------------------------------------- + */ + +#if 0 +/* + * not really used in our situation so keep them commented out for now + */ +static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */ +static void do_serial_bh(void) +{ + run_task_queue(&tq_serial); + printk(KERN_ERR "do_serial_bh: called\n"); +} +#endif + +static void do_softint(void *private_) +{ + printk(KERN_ERR "simserial: do_softint called\n"); +} + +static void rs_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + unsigned long flags; + + if (!tty || !info->xmit.buf) return; + + local_irq_save(flags); + if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) { + local_irq_restore(flags); + return; + } + info->xmit.buf[info->xmit.head] = ch; + info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1); + local_irq_restore(flags); +} + +static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done) +{ + int count; + unsigned long flags; + + + local_irq_save(flags); + + if (info->x_char) { + char c = info->x_char; + + console->write(console, &c, 1); + + info->state->icount.tx++; + info->x_char = 0; + + goto out; + } + + if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) { +#ifdef SIMSERIAL_DEBUG + printk("transmit_chars: head=%d, tail=%d, stopped=%d\n", + info->xmit.head, info->xmit.tail, info->tty->stopped); +#endif + goto out; + } + /* + * We removed the loop and try to do it in to chunks. We need + * 2 operations maximum because it's a ring buffer. + * + * First from current to tail if possible. + * Then from the beginning of the buffer until necessary + */ + + count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE), + SERIAL_XMIT_SIZE - info->xmit.tail); + console->write(console, info->xmit.buf+info->xmit.tail, count); + + info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1); + + /* + * We have more at the beginning of the buffer + */ + count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (count) { + console->write(console, info->xmit.buf, count); + info->xmit.tail += count; + } +out: + local_irq_restore(flags); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + + if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped || + !info->xmit.buf) + return; + + transmit_chars(info, NULL); +} + + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct async_struct *info = (struct async_struct *)tty->driver_data; + unsigned long flags; + + if (!tty || !info->xmit.buf || !tmp_buf) return 0; + + local_irq_save(flags); + while (1) { + c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); + if (count < c) + c = count; + if (c <= 0) { + break; + } + memcpy(info->xmit.buf + info->xmit.head, buf, c); + info->xmit.head = ((info->xmit.head + c) & + (SERIAL_XMIT_SIZE-1)); + buf += c; + count -= c; + ret += c; + } + local_irq_restore(flags); + /* + * Hey, we transmit directly from here in our case + */ + if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) + && !tty->stopped && !tty->hw_stopped) { + transmit_chars(info, NULL); + } + return ret; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + + return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + + return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + unsigned long flags; + + local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; + local_irq_restore(flags); + + wake_up_interruptible(&tty->write_wait); + + if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && + tty->ldisc.write_wakeup) + (tty->ldisc.write_wakeup)(tty); +} + +/* + * This function is used to send a high-priority XON/XOFF character to + * the device + */ +static void rs_send_xchar(struct tty_struct *tty, char ch) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + + info->x_char = ch; + if (ch) { + /* + * I guess we could call console->write() directly but + * let's do that for now. + */ + transmit_chars(info, NULL); + } +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty)); + + printk(KERN_INFO "simrs_throttle called\n"); +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct async_struct *info = (struct async_struct *)tty->driver_data; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + rs_send_xchar(tty, START_CHAR(tty)); + } + printk(KERN_INFO "simrs_unthrottle called\n"); +} + +/* + * rs_break() --- routine which turns the break handling on or off + */ +static void rs_break(struct tty_struct *tty, int break_state) +{ +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TIOCMGET: + printk(KERN_INFO "rs_ioctl: TIOCMGET called\n"); + return -EINVAL; + case TIOCMBIS: + case TIOCMBIC: + case TIOCMSET: + printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n"); + return -EINVAL; + case TIOCGSERIAL: + printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n"); + return 0; + case TIOCSSERIAL: + printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n"); + return 0; + case TIOCSERCONFIG: + printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n"); + return -EINVAL; + + case TIOCSERGETLSR: /* Get line status register */ + printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n"); + return -EINVAL; + + case TIOCSERGSTRUCT: + printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n"); +#if 0 + if (copy_to_user((struct async_struct *) arg, + info, sizeof(struct async_struct))) + return -EFAULT; +#endif + return 0; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n"); + return 0; + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n"); + return 0; + + case TIOCSERGWILD: + case TIOCSERSWILD: + /* "setserial -W" is called in Debian boot */ + printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n"); + return 0; + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + unsigned int cflag = tty->termios->c_cflag; + + if ( (cflag == old_termios->c_cflag) + && ( RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + + /* Handle turning off CRTSCTS */ + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } +} +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct async_struct * info) +{ + unsigned long flags; + struct serial_state *state; + int retval; + + if (!(info->flags & ASYNC_INITIALIZED)) return; + + state = info->state; + +#ifdef SIMSERIAL_DEBUG + printk("Shutting down serial port %d (irq %d)....", info->line, + state->irq); +#endif + + local_irq_save(flags); + { + /* + * First unlink the serial port from the IRQ chain... + */ + if (info->next_port) + info->next_port->prev_port = info->prev_port; + if (info->prev_port) + info->prev_port->next_port = info->next_port; + else + IRQ_ports[state->irq] = info->next_port; + + /* + * Free the IRQ, if necessary + */ + if (state->irq && (!IRQ_ports[state->irq] || + !IRQ_ports[state->irq]->next_port)) { + if (IRQ_ports[state->irq]) { + free_irq(state->irq, NULL); + retval = request_irq(state->irq, rs_interrupt_single, + IRQ_T(info), "serial", NULL); + + if (retval) + printk(KERN_ERR "serial shutdown: request_irq: error %d" + " Couldn't reacquire IRQ.\n", retval); + } else + free_irq(state->irq, NULL); + } + + if (info->xmit.buf) { + free_page((unsigned long) info->xmit.buf); + info->xmit.buf = 0; + } + + if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + } + local_irq_restore(flags); +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct async_struct * info = (struct async_struct *)tty->driver_data; + struct serial_state *state; + unsigned long flags; + + if (!info ) return; + + state = info->state; + + local_irq_save(flags); + if (tty_hung_up_p(filp)) { +#ifdef SIMSERIAL_DEBUG + printk("rs_close: hung_up\n"); +#endif + local_irq_restore(flags); + return; + } +#ifdef SIMSERIAL_DEBUG + printk("rs_close ttys%d, count = %d\n", info->line, state->count); +#endif + if ((tty->count == 1) && (state->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. state->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, " + "state->count is %d\n", state->count); + state->count = 1; + } + if (--state->count < 0) { + printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n", + info->line, state->count); + state->count = 0; + } + if (state->count) { + local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; + local_irq_restore(flags); + + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + shutdown(info); + if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); + if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); + info->event = 0; + info->tty = 0; + if (info->blocked_open) { + if (info->close_delay) { + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(info->close_delay); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); +} + +/* + * rs_wait_until_sent() --- wait until the transmitter is empty + */ +static void rs_wait_until_sent(struct tty_struct *tty, int timeout) +{ +} + + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +static void rs_hangup(struct tty_struct *tty) +{ + struct async_struct * info = (struct async_struct *)tty->driver_data; + struct serial_state *state = info->state; + +#ifdef SIMSERIAL_DEBUG + printk("rs_hangup: called\n"); +#endif + + state = info->state; + + rs_flush_buffer(tty); + if (info->flags & ASYNC_CLOSING) + return; + shutdown(info); + + info->event = 0; + state->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + + +static int get_async_struct(int line, struct async_struct **ret_info) +{ + struct async_struct *info; + struct serial_state *sstate; + + sstate = rs_table + line; + sstate->count++; + if (sstate->info) { + *ret_info = sstate->info; + return 0; + } + info = kmalloc(sizeof(struct async_struct), GFP_KERNEL); + if (!info) { + sstate->count--; + return -ENOMEM; + } + memset(info, 0, sizeof(struct async_struct)); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->delta_msr_wait); + info->magic = SERIAL_MAGIC; + info->port = sstate->port; + info->flags = sstate->flags; + info->xmit_fifo_size = sstate->xmit_fifo_size; + info->line = line; + INIT_WORK(&info->work, do_softint, info); + info->state = sstate; + if (sstate->info) { + kfree(info); + *ret_info = sstate->info; + return 0; + } + *ret_info = sstate->info = info; + return 0; +} + +static int +startup(struct async_struct *info) +{ + unsigned long flags; + int retval=0; + irqreturn_t (*handler)(int, void *, struct pt_regs *); + struct serial_state *state= info->state; + unsigned long page; + + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + local_irq_save(flags); + + if (info->flags & ASYNC_INITIALIZED) { + free_page(page); + goto errout; + } + + if (!state->port || !state->type) { + if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); + free_page(page); + goto errout; + } + if (info->xmit.buf) + free_page(page); + else + info->xmit.buf = (unsigned char *) page; + +#ifdef SIMSERIAL_DEBUG + printk("startup: ttys%d (irq %d)...", info->line, state->irq); +#endif + + /* + * Allocate the IRQ if necessary + */ + if (state->irq && (!IRQ_ports[state->irq] || + !IRQ_ports[state->irq]->next_port)) { + if (IRQ_ports[state->irq]) { + retval = -EBUSY; + goto errout; + } else + handler = rs_interrupt_single; + + retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL); + if (retval) { + if (capable(CAP_SYS_ADMIN)) { + if (info->tty) + set_bit(TTY_IO_ERROR, + &info->tty->flags); + retval = 0; + } + goto errout; + } + } + + /* + * Insert serial port into IRQ chain. + */ + info->prev_port = 0; + info->next_port = IRQ_ports[state->irq]; + if (info->next_port) + info->next_port->prev_port = info; + IRQ_ports[state->irq] = info; + + if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->xmit.head = info->xmit.tail = 0; + +#if 0 + /* + * Set up serial timers... + */ + timer_table[RS_TIMER].expires = jiffies + 2*HZ/100; + timer_active |= 1 << RS_TIMER; +#endif + + /* + * Set up the tty->alt_speed kludge + */ + if (info->tty) { + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) + info->tty->alt_speed = 57600; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) + info->tty->alt_speed = 115200; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) + info->tty->alt_speed = 230400; + if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) + info->tty->alt_speed = 460800; + } + + info->flags |= ASYNC_INITIALIZED; + local_irq_restore(flags); + return 0; + +errout: + local_irq_restore(flags); + return retval; +} + + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct async_struct *info; + int retval, line; + unsigned long page; + + line = tty->index; + if ((line < 0) || (line >= NR_PORTS)) + return -ENODEV; + retval = get_async_struct(line, &info); + if (retval) + return retval; + tty->driver_data = info; + info->tty = tty; + +#ifdef SIMSERIAL_DEBUG + printk("rs_open %s, count = %d\n", tty->name, info->state->count); +#endif + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + /* + * If the port is the middle of closing, bail out now + */ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +#else + return -EAGAIN; +#endif + } + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) { + return retval; + } + + /* + * figure out which console to use (should be one already) + */ + console = console_drivers; + while (console) { + if ((console->flags & CON_ENABLED) && console->write) break; + console = console->next; + } + +#ifdef SIMSERIAL_DEBUG + printk("rs_open ttys%d successful\n", info->line); +#endif + return 0; +} + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, struct serial_state *state) +{ + return sprintf(buf, "%d: uart:%s port:%lX irq:%d\n", + state->line, uart_config[state->type].name, + state->port, state->irq); +} + +static int rs_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int i, len = 0, l; + off_t begin = 0; + + len += sprintf(page, "simserinfo:1.0 driver:%s\n", serial_version); + for (i = 0; i < NR_PORTS && len < 4000; i++) { + l = line_info(page + len, &rs_table[i]); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + } + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (begin-off); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* + * --------------------------------------------------------------------- + * rs_init() and friends + * + * rs_init() is called at boot-time to initialize the serial driver. + * --------------------------------------------------------------------- + */ + +/* + * This routine prints out the appropriate serial driver version + * number, and identifies which options were configured into this + * driver. + */ +static inline void show_serial_version(void) +{ + printk(KERN_INFO "%s version %s with", serial_name, serial_version); + printk(KERN_INFO " no serial options enabled\n"); +} + +static struct tty_operations hp_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .put_char = rs_put_char, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .send_xchar = rs_send_xchar, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .break_ctl = rs_break, + .wait_until_sent = rs_wait_until_sent, + .read_proc = rs_read_proc, +}; + +/* + * The serial driver boot-time initialization code! + */ +static int __init +simrs_init (void) +{ + int i; + struct serial_state *state; + + if (!ia64_platform_is("hpsim")) + return -ENODEV; + + hp_simserial_driver = alloc_tty_driver(1); + if (!hp_simserial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + + hp_simserial_driver->owner = THIS_MODULE; + hp_simserial_driver->driver_name = "simserial"; + hp_simserial_driver->name = "ttyS"; + hp_simserial_driver->major = TTY_MAJOR; + hp_simserial_driver->minor_start = 64; + hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL; + hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL; + hp_simserial_driver->init_termios = tty_std_termios; + hp_simserial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(hp_simserial_driver, &hp_ops); + + /* + * Let's have a little bit of fun ! + */ + for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) { + + if (state->type == PORT_UNKNOWN) continue; + + if (!state->irq) { + state->irq = assign_irq_vector(AUTO_ASSIGN); + ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq); + } + + printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n", + state->line, + state->port, state->irq, + uart_config[state->type].name); + } + + if (tty_register_driver(hp_simserial_driver)) + panic("Couldn't register simserial driver\n"); + + return 0; +} + +#ifndef MODULE +__initcall(simrs_init); +#endif |