diff options
Diffstat (limited to 'arch')
1510 files changed, 45860 insertions, 21688 deletions
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 78b03ef39f6f..ed60a1ee1ed3 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -292,9 +292,4 @@ static inline long atomic64_dec_if_positive(atomic64_t *v) #define atomic_dec(v) atomic_sub(1,(v)) #define atomic64_dec(v) atomic64_sub(1,(v)) -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #endif /* _ALPHA_ATOMIC_H */ diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h index a19ba5efea4c..4bdfbd444e63 100644 --- a/arch/alpha/include/asm/bitops.h +++ b/arch/alpha/include/asm/bitops.h @@ -53,9 +53,6 @@ __set_bit(unsigned long nr, volatile void * addr) *m |= 1 << (nr & 31); } -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - static inline void clear_bit(unsigned long nr, volatile void * addr) { diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h index d01afb78919c..f7f680f7457d 100644 --- a/arch/alpha/include/asm/pci.h +++ b/arch/alpha/include/asm/pci.h @@ -59,11 +59,6 @@ struct pci_controller { extern void pcibios_set_master(struct pci_dev *dev); -extern inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* IOMMU controls. */ /* The PCI address space does not equal the physical memory address space. diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 3d6ce6d56fc9..48bbea6898b3 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -73,12 +73,14 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TIF_SYSCALL_AUDIT 4 /* syscall audit active */ #define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ #define TIF_MEMDIE 13 /* is terminating due to OOM killer */ +#define TIF_POLLING_NRFLAG 14 /* idle is polling for TIF_NEED_RESCHED */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) /* Work to do on interrupt/exception return. */ #define _TIF_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ @@ -92,8 +94,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define TS_UAC_NOFIX 0x0002 /* ! flags as they match */ #define TS_UAC_SIGBUS 0x0004 /* ! userspace part of 'osf_sysinfo' */ #define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ -#define TS_POLLING 0x0010 /* idle task polling need_resched, - skip sending interrupt */ #ifndef __ASSEMBLY__ #define HAVE_SET_RESTORE_SIGMASK 1 diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h index 03e494f695d1..83f03ca6caf6 100644 --- a/arch/arc/include/asm/atomic.h +++ b/arch/arc/include/asm/atomic.h @@ -190,11 +190,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #endif /* !CONFIG_ARC_HAS_LLSC */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - /** * __atomic_add_unless - add unless the number is a given value * @v: pointer of type atomic_t diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h index 647a83a8e756..ebc0cf3164dc 100644 --- a/arch/arc/include/asm/bitops.h +++ b/arch/arc/include/asm/bitops.h @@ -19,6 +19,7 @@ #include <linux/types.h> #include <linux/compiler.h> +#include <asm/barrier.h> /* * Hardware assisted read-modify-write using ARC700 LLOCK/SCOND insns. @@ -496,10 +497,6 @@ static inline __attribute__ ((const)) int __ffs(unsigned long word) */ #define ffz(x) __ffs(~(x)) -/* TODO does this affect uni-processor code */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/fls64.h> #include <asm-generic/bitops/sched.h> diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h index 764f1e3ba752..09db952e14bd 100644 --- a/arch/arc/include/asm/sections.h +++ b/arch/arc/include/asm/sections.h @@ -12,6 +12,5 @@ #include <asm-generic/sections.h> extern char __arc_dccm_base[]; -extern char __dtb_start[]; #endif diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index b6dc4e21fd32..0b3ef4025d89 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -42,7 +42,7 @@ const struct machine_desc * __init setup_machine_fdt(void *dt) const struct machine_desc *mdesc; unsigned long dt_root; void *clk; - unsigned long len; + int len; if (!early_init_dt_scan(dt)) return NULL; diff --git a/arch/arc/kernel/troubleshoot.c b/arch/arc/kernel/troubleshoot.c index 73a7450ee622..1badf9b84b51 100644 --- a/arch/arc/kernel/troubleshoot.c +++ b/arch/arc/kernel/troubleshoot.c @@ -86,12 +86,13 @@ static void show_faulting_vma(unsigned long address, char *buf) unsigned long ino = 0; dev_t dev = 0; char *nm = buf; + struct mm_struct *active_mm = current->active_mm; /* can't use print_vma_addr() yet as it doesn't check for * non-inclusive vma */ - - vma = find_vma(current->active_mm, address); + down_read(&active_mm->mmap_sem); + vma = find_vma(active_mm, address); /* check against the find_vma( ) behaviour which returns the next VMA * if the container VMA is not found @@ -110,9 +111,10 @@ static void show_faulting_vma(unsigned long address, char *buf) vma->vm_start < TASK_UNMAPPED_BASE ? address : address - vma->vm_start, nm, vma->vm_start, vma->vm_end); - } else { + } else pr_info(" @No matching VMA found\n"); - } + + up_read(&active_mm->mmap_sem); } static void show_ecr_verbose(struct pt_regs *regs) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8615dfa604c4..87b63fde06d7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -311,6 +311,7 @@ config ARCH_MULTIPLATFORM select CLKSRC_OF select COMMON_CLK select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -373,7 +374,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF @@ -477,6 +477,7 @@ config ARCH_IOP13XX select PCI select PLAT_IOP select VMSPLIT_1G + select SPARSE_IRQ help Support for Intel's IOP13XX (XScale) family of processors. @@ -752,7 +753,7 @@ config ARCH_S3C64XX select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V6K select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -826,25 +827,6 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS - bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select ARCH_SPARSEMEM_ENABLE - select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - select USE_OF - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -948,6 +930,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-axxia/Kconfig" + source "arch/arm/mach-bcm/Kconfig" source "arch/arm/mach-berlin/Kconfig" @@ -1587,9 +1571,9 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 - default 288 if ARCH_SUNXI default 264 if MACH_H4700 default 0 help diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index eab8ecbe69c1..8f90595069a1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -317,6 +317,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SX_UART + bool "i.MX6SX Debug UART" + depends on SOC_IMX6SX + help + Say Y here if you want kernel low-level debugging support + on i.MX6SX. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -349,56 +356,40 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART + config DEBUG_MSM_UART + bool "Kernel low-level debugging messages via MSM UART" + depends on ARCH_MSM help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to the serial port on MSM devices. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 + MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 + MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + MSM7X30 0xaca00000 0xe1000000 UART1 + MSM7X30 0xacb00000 0xe1000000 UART2 + MSM7X30 0xacc00000 0xe1000000 UART3 - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the serial port on Qualcomm devices. - config DEBUG_MSM8974_UART - bool "Kernel low-level debugging messages via MSM 8974 UART" - depends on ARCH_MSM8974 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8974 devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" @@ -625,6 +616,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -637,6 +629,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -649,6 +642,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S3C24XX_UART if ARCH_S3C24XX bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -670,6 +664,33 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_S3C2410_UART0 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 0 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 0. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART1 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 1 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 1. The port must have been initialised + by the boot-loader before use. + + config DEBUG_S3C2410_UART2 + depends on ARCH_S3C24XX + select DEBUG_S3C2410_UART + bool "Use S3C2410/S3C2412 UART 2 for low-level debug" + help + Say Y here if you want the debug print routines to direct + their output to UART 2. The port must have been initialised + by the boot-loader before use. + config DEBUG_SOCFPGA_UART depends on ARCH_SOCFPGA bool "Use SOCFPGA UART for low-level debug" @@ -921,6 +942,13 @@ endchoice config DEBUG_EXYNOS_UART bool +config DEBUG_S3C2410_UART + bool + select DEBUG_S3C24XX_UART + +config DEBUG_S3C24XX_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -935,13 +963,23 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART default 1 depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. +config DEBUG_VF_UART_PORT + int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART + default 1 + range 0 3 + depends on SOC_VF610 + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA @@ -950,10 +988,6 @@ config DEBUG_STI_UART bool depends on ARCH_STI -config DEBUG_MSM_UART - bool - depends on ARCH_MSM || ARCH_QCOM - config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 @@ -970,9 +1004,11 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART - default "debug/msm.S" if DEBUG_MSM_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART + default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART + default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1029,12 +1065,19 @@ config DEBUG_UART_PHYS default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI + default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0x7c0003f8 if FOOTBRIDGE default 0x80070000 if DEBUG_IMX23_UART default 0x80074000 if DEBUG_IMX28_UART default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xa9a00000 if DEBUG_MSM_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -1050,6 +1093,7 @@ config DEBUG_UART_PHYS ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1058,11 +1102,13 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC + default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1075,9 +1121,16 @@ config DEBUG_UART_VIRT default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI + default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ + DEBUG_S3C2410_UART0) + default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \ + DEBUG_S3C2410_UART1) + default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ + DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1116,7 +1169,8 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 41c1931f0155..6721fab13734 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -138,10 +138,12 @@ endif textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 +textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 066b03480b63..3a8b32df6b31 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -60,11 +60,6 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C24XX) - .macro loadsp, rb, tmp - mov \rb, #0x50000000 - add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT - .endm #else .macro loadsp, rb, tmp addruart \rb, \tmp diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 377b7c364033..5986ff63b901 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,13 +50,15 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ - berlin2cd-google-chromecast.dtb + berlin2cd-google-chromecast.dtb \ + berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb @@ -72,10 +74,14 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5260-xyref5260.dtb \ + exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ + exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ - exynos5440-ssdk5440.dtb + exynos5440-ssdk5440.dtb \ + exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -127,6 +133,9 @@ kirkwood := \ kirkwood-nsa310a.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ + kirkwood-openrd-base.dtb \ + kirkwood-openrd-client.dtb \ + kirkwood-openrd-ultimate.dtb \ kirkwood-rd88f6192.dtb \ kirkwood-rd88f6281-a0.dtb \ kirkwood-rd88f6281-a1.dtb \ @@ -157,10 +166,12 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx27-phytec-phycard-s-rdk.dtb \ imx31-bug.dtb \ imx35-eukrea-mbimxsd35-baseboard.dtb \ + imx35-pdk.dtb \ imx50-evk.dtb \ imx51-apf51.dtb \ imx51-apf51dev.dtb \ imx51-babbage.dtb \ + imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx53-ard.dtb \ imx53-m53evk.dtb \ @@ -179,6 +190,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw54xx.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ + imx6dl-phytec-pbab01.dtb \ + imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ @@ -203,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \ + vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ @@ -230,76 +244,84 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ nspire-tp.dtb \ nspire-clp.dtb -dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ - omap2430-sdp.dtb \ +dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \ omap2420-n800.dtb \ omap2420-n810.dtb \ omap2420-n810-wimax.dtb \ + omap2430-sdp.dtb +dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \ + am3517-evm.dtb \ + am3517_mt_ventoux.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-beagle-xm.dtb \ + omap3-beagle-xm-ab.dtb \ omap3-cm-t3517.dtb \ - omap3-sbc-t3517.dtb \ omap3-cm-t3530.dtb \ - omap3-sbc-t3530.dtb \ omap3-cm-t3730.dtb \ - omap3-sbc-t3730.dtb \ omap3-devkit8000.dtb \ - omap3-beagle-xm.dtb \ - omap3-beagle-xm-ab.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ + omap3-gta04.dtb \ + omap3-igep0020.dtb \ + omap3-igep0030.dtb \ omap3-ldp.dtb \ + omap3-lilly-dbb056.dtb \ omap3-n900.dtb \ omap3-n9.dtb \ omap3-n950.dtb \ omap3-overo-alto35.dtb \ - omap3-overo-storm-alto35.dtb \ omap3-overo-chestnut43.dtb \ - omap3-overo-storm-chestnut43.dtb \ omap3-overo-gallop43.dtb \ - omap3-overo-storm-gallop43.dtb \ omap3-overo-palo43.dtb \ + omap3-overo-storm-alto35.dtb \ + omap3-overo-storm-chestnut43.dtb \ + omap3-overo-storm-gallop43.dtb \ omap3-overo-storm-palo43.dtb \ - omap3-overo-summit.dtb \ omap3-overo-storm-summit.dtb \ - omap3-overo-tobi.dtb \ omap3-overo-storm-tobi.dtb \ - omap3-gta04.dtb \ - omap3-igep0020.dtb \ - omap3-igep0030.dtb \ - omap3-lilly-dbb056.dtb \ - omap3-zoom3.dtb \ - omap4-duovero-parlor.dtb \ + omap3-overo-summit.dtb \ + omap3-overo-tobi.dtb \ + omap3-sbc-t3517.dtb \ + omap3-sbc-t3530.dtb \ + omap3-sbc-t3730.dtb \ + omap3-zoom3.dtb +dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ + am335x-bone.dtb \ + am335x-boneblack.dtb \ + am335x-evm.dtb \ + am335x-evmsk.dtb \ + am335x-nano.dtb +dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ - omap4-var-som.dtb \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ - omap5-uevm.dtb \ - am335x-evm.dtb \ - am335x-evmsk.dtb \ - am335x-bone.dtb \ - am335x-boneblack.dtb \ - am335x-nano.dtb \ - am335x-base0033.dtb \ - am3517-craneboard.dtb \ - am3517-evm.dtb \ - am3517_mt_ventoux.dtb \ - am43x-epos-evm.dtb \ - am437x-gp-evm.dtb \ - dra7-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb + omap4-var-dvk-om44.dtb \ + omap4-var-stk-om44.dtb +dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-gp-evm.dtb +dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ + omap5-sbc-t54.dtb \ + omap5-uevm.dtb +dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \ + dra72-evm.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ - qcom-msm8960-cdp.dtb \ - qcom-apq8074-dragonboard.dtb +dtb-$(CONFIG_ARCH_QCOM) += \ + qcom-apq8064-ifc6410.dtb \ + qcom-apq8074-dragonboard.dtb \ + qcom-apq8084-mtp.dtb \ + qcom-msm8660-surf.dtb \ + qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ - r7s72100-genmai-reference.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ @@ -314,12 +336,14 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ r8a73a4-ape6evm-reference.dtb \ sh7372-mackerel.dtb dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ - r7s72100-genmai-reference.dtb \ + r7s72100-genmai.dtb \ + r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ + socfpga_cyclone5_socrates.dtb \ socfpga_vt.dtb dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ spear1340-evb.dtb @@ -328,24 +352,33 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ - stih416-b2000.dtb \ +dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ + stih415-b2000.dtb \ stih415-b2020.dtb \ - stih416-b2020.dtb -dtb-$(CONFIG_ARCH_SUNXI) += \ + stih416-b2000.dtb \ + stih416-b2020.dtb \ + stih416-b2020-revE.dtb +dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino.dtb +dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ + sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-olinuxino-micro.dtb +dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ + sun6i-a31-m9.dtb +dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-i12-tvbox.dtb \ sun7i-a20-olinuxino-micro.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -360,7 +393,11 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ + tegra30-colibri-eval-v3.dtb \ tegra114-dalmore.dtb \ + tegra114-roth.dtb \ + tegra114-tn7.dtb \ + tegra124-jetson-tk1.dtb \ tegra124-venice2.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 2e7d932887b5..bde1777b62be 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -182,31 +182,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c0 { @@ -280,13 +280,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &mmc1 { diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 6b71ad95a5cf..305975d3f531 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -26,7 +26,6 @@ pinctrl-0 = <&emmc_pins>; bus-width = <8>; status = "okay"; - ti,vcc-aux-disable-is-sleep; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 6028217ace0f..ecb267767cf5 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -268,34 +268,34 @@ lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < - 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ - 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ - 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ - 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ - 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ - 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ - 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ - 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ - 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ - 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ - 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ - 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ - 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ - 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ - 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ - 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ - 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ - 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ - 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ - 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ - 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ - 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ - 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ - 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ - 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ - 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ - 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ - 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ >; }; @@ -330,31 +330,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &i2c1 { @@ -614,12 +614,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index ab238850a7b2..ab9a34ce524c 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -57,6 +57,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator@3 { + compatible = "regulator-fixed"; + regulator-name = "vtt"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -363,31 +374,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; &epwmss2 { @@ -484,12 +495,14 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; dual_emac = <1>; + status = "okay"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 9f22c189f636..8a0a72dc7dd7 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -95,6 +95,14 @@ }; }; +&mac { + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; +}; + &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; }; @@ -200,31 +208,31 @@ &usb { status = "okay"; +}; - control@44e10620 { - status = "okay"; - }; +&usb_ctrl_mod { + status = "okay"; +}; - usb-phy@47401300 { - status = "okay"; - }; +&usb0_phy { + status = "okay"; +}; - usb-phy@47401b00 { - status = "okay"; - }; +&usb1_phy { + status = "okay"; +}; - usb@47401000 { - status = "okay"; - }; +&usb0 { + status = "okay"; +}; - usb@47401800 { - status = "okay"; - dr_mode = "host"; - }; +&usb1 { + status = "okay"; + dr_mode = "host"; +}; - dma-controller@47402000 { - status = "okay"; - }; +&cppi41dma { + status = "okay"; }; #include "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 9907b494b99c..a3466455b171 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -344,6 +344,11 @@ &mac { dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + status = "okay"; }; &cpsw_emac0 { diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi index 9ccfe508dea2..712edce7d6fb 100644 --- a/arch/arm/boot/dts/am33xx-clocks.dtsi +++ b/arch/arm/boot/dts/am33xx-clocks.dtsi @@ -96,47 +96,29 @@ clock-div = <1>; }; - ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk { + ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <0>; reg = <0x0664>; }; - ehrpwm0_tbclk: ehrpwm0_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm0_gate_tbclk>; - }; - - ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk { + ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <1>; reg = <0x0664>; }; - ehrpwm1_tbclk: ehrpwm1_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm1_gate_tbclk>; - }; - - ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk { + ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { #clock-cells = <0>; - compatible = "ti,composite-no-wait-gate-clock"; + compatible = "ti,gate-clock"; clocks = <&dpll_per_m2_ck>; ti,bit-shift = <2>; reg = <0x0664>; }; - - ehrpwm2_tbclk: ehrpwm2_tbclk { - #clock-cells = <0>; - compatible = "ti,composite-clock"; - clocks = <&ehrpwm2_gate_tbclk>; - }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 7ad75b4e0663..9f53e824b037 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -147,9 +147,6 @@ <0x44e10f90 0x40>; interrupts = <12 13 14>; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; gpio0: gpio@44e07000 { @@ -688,6 +685,7 @@ */ interrupts = <40 41 42 43>; ranges; + status = "disabled"; davinci_mdio: mdio@4a101000 { compatible = "ti,davinci_mdio"; @@ -696,6 +694,7 @@ ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; reg = <0x4a101000 0x100>; + status = "disabled"; }; cpsw_emac0: slave@4a100200 { diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index d1f8707ff1df..794c73e5c4e4 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -67,11 +67,15 @@ }; ocp { - compatible = "simple-bus"; + compatible = "ti,am4372-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main"; + reg = <0x44000000 0x400000 + 0x44800000 0x400000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; prcm: prcm@44df0000 { compatible = "ti,am4-prcm"; @@ -108,9 +112,6 @@ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; - dma-channels = <64>; - ti,edma-regions = <4>; - ti,edma-slots = <256>; }; uart0: serial@44e09000 { @@ -521,6 +522,12 @@ /* Filled in by U-Boot */ mac-address = [ 00 00 00 00 00 00 ]; }; + + phy_sel: cpsw-phy-sel@44e10650 { + compatible = "ti,am43xx-cpsw-phy-sel"; + reg= <0x44e10650 0x4>; + reg-names = "gmii-sel"; + }; }; epwmss0: epwmss@48300000 { @@ -735,6 +742,121 @@ #size-cells = <1>; status = "disabled"; }; + + am43xx_control_usb2phy1: control-phy@44e10620 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10620 0x4>; + reg-names = "power"; + }; + + am43xx_control_usb2phy2: control-phy@0x44e10628 { + compatible = "ti,control-phy-usb2-am437"; + reg = <0x44e10628 0x4>; + reg-names = "power"; + }; + + ocp2scp0: ocp2scp@483a8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp0"; + + usb2_phy1: phy@483a8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483a8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy1>; + clocks = <&usb_phy0_always_on_clk32k>, + <&usb_otg_ss0_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + ocp2scp1: ocp2scp@483e8000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp1"; + + usb2_phy2: phy@483e8000 { + compatible = "ti,am437x-usb2"; + reg = <0x483e8000 0x8000>; + ctrl-module = <&am43xx_control_usb2phy2>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", "refclk"; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + dwc3_1: omap_dwc3@48380000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss0"; + reg = <0x48380000 0x10000>; + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb1: usb@48390000 { + compatible = "synopsys,dwc3"; + reg = <0x48390000 0x17000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + dwc3_2: omap_dwc3@483c0000 { + compatible = "ti,am437x-dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x483c0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <1>; + ranges; + + usb2: usb@483d0000 { + compatible = "synopsys,dwc3"; + reg = <0x483d0000 0x17000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + maximum-speed = "high-speed"; + dr_mode = "otg"; + status = "disabled"; + }; + }; + + qspi: qspi@47900000 { + compatible = "ti,am4372-qspi"; + reg = <0x47900000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + interrupts = <0 138 0x4>; + num-cs = <4>; + status = "disabled"; + }; + + hdq: hdq@48347000 { + compatible = "ti,am43xx-hdq"; + reg = <0x48347000 0x1000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&func_12m_clk>; + clock-names = "fck"; + ti,hwmods = "hdq1w"; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index a055f7f0f14a..c25d15837ce9 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -27,6 +27,17 @@ enable-active-high; }; + vtt_fixed: fixedregulator-vtt { + compatible = "regulator-fixed"; + regulator-name = "vtt_fixed"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -81,6 +92,85 @@ 0x164 MUX_MODE0 /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */ >; }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x264 (PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nand_flash_x8: nand_flash_x8 { + pinctrl-single,pins = < + 0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* spi2_cs0.gpio/eMMCorNANDsel */ + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; }; &i2c0 { @@ -93,6 +183,20 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; + + pixcir_ts@5c { + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; + reg = <0x5c>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + + attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + + x-size = <1024>; + y-size = <600>; + }; }; &epwmss0 { @@ -130,3 +234,128 @@ pinctrl-0 = <&mmc1_pins>; cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&mac { + slaves = <1>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x8>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <8>; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <25>; + gpmc,adv-wr-off-ns = <25>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <20>; + gpmc,oe-on-ns = <3>; + gpmc,oe-off-ns = <30>; + gpmc,access-ns = <30>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x00040000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00040000 0x00040000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00080000 0x00040000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x000c0000 0x00040000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00100000 0x00080000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x00180000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x00280000 0x00040000>; + }; + partition@7 { + label = "NAND.u-boot-env.backup1"; + reg = <0x002c0000 0x00040000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00300000 0x00700000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x1f600000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 167dbc8494de..ad362c50e32e 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -138,6 +138,29 @@ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ >; }; + + qspi1_default: qspi1_default { + pinctrl-single,pins = < + 0x7c (PIN_INPUT_PULLUP | MUX_MODE3) + 0x88 (PIN_INPUT_PULLUP | MUX_MODE2) + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + pixcir_ts_pins: pixcir_ts_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ + >; + }; + + hdq_pins: pinmux_hdq_pins { + pinctrl-single,pins = < + 0x234 (PIN_INPUT_PULLUP | MUX_MODE1) /* cam1_wen.hdq_gpio */ + >; + }; }; matrix_keypad: matrix_keypad@0 { @@ -226,7 +249,9 @@ }; pixcir_ts@5c { - compatible = "pixcir,pixcir_ts"; + compatible = "pixcir,pixcir_tangoc"; + pinctrl-names = "default"; + pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; interrupts = <17 0>; @@ -234,7 +259,7 @@ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; x-size = <1024>; - y-size = <768>; + y-size = <600>; }; }; @@ -341,7 +366,7 @@ }; partition@9 { label = "NAND.file-system"; - reg = <0x00800000 0x1F600000>; + reg = <0x00a00000 0x1f600000>; }; }; }; @@ -367,3 +392,79 @@ pinctrl-0 = <&spi1_pins>; status = "okay"; }; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_default>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&hdq { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 142009cc9332..c7dc9dab93a4 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -11,6 +11,22 @@ sys_clkin_ck: sys_clkin_ck { #clock-cells = <0>; compatible = "ti,mux-clock"; + clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; + ti,bit-shift = <31>; + reg = <0x0040>; + }; + + crystal_freq_sel_ck: crystal_freq_sel_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; + ti,bit-shift = <29>; + reg = <0x0040>; + }; + + sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ti,bit-shift = <22>; reg = <0x0040>; @@ -87,6 +103,54 @@ clock-mult = <1>; clock-div = <1>; }; + + ehrpwm0_tbclk: ehrpwm0_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <0>; + reg = <0x0664>; + }; + + ehrpwm1_tbclk: ehrpwm1_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <1>; + reg = <0x0664>; + }; + + ehrpwm2_tbclk: ehrpwm2_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <2>; + reg = <0x0664>; + }; + + ehrpwm3_tbclk: ehrpwm3_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <4>; + reg = <0x0664>; + }; + + ehrpwm4_tbclk: ehrpwm4_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <5>; + reg = <0x0664>; + }; + + ehrpwm5_tbclk: ehrpwm5_tbclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_m2_ck>; + ti,bit-shift = <6>; + reg = <0x0664>; + }; }; &prcm_clocks { clk_32768_ck: clk_32768_ck { @@ -229,6 +293,7 @@ reg = <0x2e30>; ti,index-starts-at-one; ti,invert-autoidle-bit; + ti,set-rate-parent; }; dpll_per_ck: dpll_per_ck { @@ -511,6 +576,7 @@ compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; reg = <0x4244>; + ti,set-rate-parent; }; dpll_extdev_ck: dpll_extdev_ck { @@ -609,10 +675,13 @@ dpll_per_clkdcoldo: dpll_per_clkdcoldo { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll_per_ck>; - clock-mult = <1>; - clock-div = <1>; + ti,clock-mult = <1>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x2e14>; + ti,invert-autoidle-bit; }; dll_aging_clk_div: dll_aging_clk_div { @@ -653,4 +722,36 @@ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; reg = <0x4260>; }; + + usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a40>; + }; + + usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&usbphy_32khz_clkmux>; + ti,bit-shift = <8>; + reg = <0x2a48>; + }; + + usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a60>; + }; + + usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_per_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x8a68>; + }; }; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 3383c4b66803..416f4e5a69c1 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -35,7 +35,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2354fe023ee0..097df7d8f0f6 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -47,7 +47,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; timer@20300 { diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 651aeb5ef439..d6d572e5af32 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4e27587667bf..c5fe8b5dcdc7 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -50,7 +50,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 3e2c857d6000..4169f4096ea3 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -51,7 +51,6 @@ internal-regs { serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; sata@a0000 { diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index bb77970c0b12..23227e0027ec 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -157,6 +157,7 @@ reg-shift = <2>; interrupts = <41>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12100 { @@ -165,6 +166,7 @@ reg-shift = <2>; interrupts = <42>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +205,11 @@ reg = <0x20300 0x34>, <0x20704 0x4>; }; + pmsu@22000 { + compatible = "marvell,armada-370-pmsu"; + reg = <0x22000 0x1000>; + }; + usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index af1f11e9e5a0..21b588b6f6bd 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -220,6 +220,11 @@ clocks = <&coreclk 2>; }; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + audio_controller: audio-controller@30000 { compatible = "marvell,armada370-audio"; reg = <0x30000 0x4000>; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 0451124e8ebf..772fec2d26ce 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -68,7 +68,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -107,6 +106,14 @@ }; }; + usb@54000 { + status = "okay"; + }; + + usb3@58000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins &sdio_st_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index 3877693fb2d8..fb92551a1e71 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -39,6 +39,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-375-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -128,6 +130,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -194,6 +201,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -203,6 +211,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -320,6 +329,46 @@ clocks = <&coreclk 0>; }; + watchdog@20300 { + compatible = "marvell,armada-375-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; + clocks = <&coreclk 0>; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-375-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + + usb@54000 { + compatible = "marvell,orion-ehci"; + reg = <0x54000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 26>; + status = "disabled"; + }; + + usb3@58000 { + compatible = "marvell,armada-375-xhci"; + reg = <0x58000 0x20000>,<0x5b880 0x80>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 16>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -391,6 +440,12 @@ status = "disabled"; }; + thermal@e8078 { + compatible = "marvell,armada375-thermal"; + reg = <0xe8078 0x4>, <0xe807c 0x8>; + status = "okay"; + }; + coreclk: mvebu-sar@e8204 { compatible = "marvell,armada-375-core-clock"; reg = <0xe8204 0x04>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 068031f0f263..e69bc6759c39 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -99,7 +101,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts index 6828d77696a6..ff9637dd8d0f 100644 --- a/arch/arm/boot/dts/armada-385-db.dts +++ b/arch/arm/boot/dts/armada-385-db.dts @@ -55,7 +55,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -65,6 +64,10 @@ phy-mode = "rgmii-id"; }; + usb@50000 { + status = "ok"; + }; + ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -81,6 +84,14 @@ }; }; + sata@a8000 { + status = "okay"; + }; + + sata@e0000 { + status = "okay"; + }; + flash@d0000 { status = "okay"; num-cs = <1>; @@ -101,6 +112,22 @@ reg = <0x1000000 0x3f000000>; }; }; + + sdhci@d8000 { + clock-frequency = <200000000>; + broken-cd; + wp-inverted; + bus-width = <8>; + status = "okay"; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts index 45250c88814b..40893255a3f0 100644 --- a/arch/arm/boot/dts/armada-385-rd.dts +++ b/arch/arm/boot/dts/armada-385-rd.dts @@ -51,7 +51,6 @@ }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; }; @@ -77,6 +76,10 @@ reg = <1>; }; }; + + usb3@f0000 { + status = "okay"; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index e2919f02e1d4..f011009bf4cf 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -21,6 +21,8 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-380-smp"; + cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; @@ -110,7 +112,7 @@ pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x1800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; @@ -131,7 +133,7 @@ pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; - reg = <0x1000 0 0 0 0>; + reg = <0x2000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index ca8813bb99ba..3de364e81b52 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -108,6 +108,11 @@ cache-level = <2>; }; + scu@c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xc000 0x58>; + }; + timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; @@ -174,6 +179,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -183,6 +189,7 @@ reg-shift = <2>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -267,6 +274,28 @@ clock-names = "nbclk", "fixed"; }; + watchdog@20300 { + compatible = "marvell,armada-380-wdt"; + reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x10>; + }; + + coherency-fabric@21010 { + compatible = "marvell,armada-380-coherency-fabric"; + reg = <0x21010 0x1c>; + }; + + pmsu@22000 { + compatible = "marvell,armada-380-pmsu"; + reg = <0x22000 0x1000>; + }; + eth1: ethernet@30000 { compatible = "marvell,armada-370-neta"; reg = <0x30000 0x4000>; @@ -283,6 +312,14 @@ status = "disabled"; }; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x58000 0x500>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 18>; + status = "disabled"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -339,6 +376,22 @@ clocks = <&gateclk 4>; }; + sata@a8000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xa8000 0x2000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 15>; + status = "disabled"; + }; + + sata@e0000 { + compatible = "marvell,armada-380-ahci"; + reg = <0xe0000 0x2000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>; + status = "disabled"; + }; + coredivclk: clock@e4250 { compatible = "marvell,armada-380-corediv-clock"; reg = <0xe4250 0xc>; @@ -347,6 +400,12 @@ clock-output-names = "nand"; }; + thermal@e8078 { + compatible = "marvell,armada380-thermal"; + reg = <0xe4078 0x4>, <0xe4074 0x4>; + status = "okay"; + }; + flash@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; @@ -356,6 +415,31 @@ clocks = <&coredivclk 0>; status = "disabled"; }; + + sdhci@d8000 { + compatible = "marvell,armada-380-sdhci"; + reg = <0xd8000 0x1000>, <0xdc000 0x100>; + interrupts = <0 25 0x4>; + clocks = <&gateclk 17>; + mrvl,clk-delay-cycles = <0x1F>; + status = "disabled"; + }; + + usb3@f0000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf0000 0x4000>,<0xf4000 0x4000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 9>; + status = "disabled"; + }; + + usb3@f8000 { + compatible = "marvell,armada-380-xhci"; + reg = <0xf8000 0x4000>,<0xfc000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 10>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index d83d7d69ac01..a55a97a70505 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -95,12 +95,10 @@ }; serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 90f0bf6f9271..42ddb2864365 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -106,19 +106,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 0c756421ae6a..0478c55ca656 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -104,19 +104,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index c2242745b9b8..25674fe81f70 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -37,19 +37,15 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; serial@12200 { - clock-frequency = <250000000>; status = "okay"; }; serial@12300 { - clock-frequency = <250000000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 98335fb34b7a..1257ff1ed278 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -27,6 +27,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 9480cf891f8c..3396b25b39e1 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -29,6 +29,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 31ba6d8fbadf..6da84bf40aaf 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -30,6 +30,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,armada-xp-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index ff049ee862eb..0cf999abc4ed 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -138,7 +138,6 @@ }; serial@12000 { - clocks = <&coreclk 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 5d42feb31049..e5c6a0492ca0 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -72,11 +72,9 @@ internal-regs { serial@12000 { - clock-frequency = <250000000>; status = "okay"; }; serial@12100 { - clock-frequency = <250000000>; status = "okay"; }; pinctrl { diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index abb9f9dcc525..5902e8359c91 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -58,6 +58,7 @@ reg-shift = <2>; interrupts = <43>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; serial@12300 { @@ -66,6 +67,7 @@ reg-shift = <2>; interrupts = <44>; reg-io-width = <1>; + clocks = <&coreclk 0>; status = "disabled"; }; @@ -117,9 +119,9 @@ clock-names = "nbclk", "fixed"; }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x400>, <0x20800 0x20>; + cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x20>; }; eth2: ethernet@30000 { diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 4537259ce529..5b8e40400bec 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { @@ -43,11 +51,54 @@ }; i2c0: i2c@f0014000 { + pinctrl-0 = <&pinctrl_i2c0_pu>; status = "okay"; }; i2c1: i2c@f0018000 { status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; macb0: ethernet@f0028000 { @@ -55,6 +106,12 @@ status = "okay"; }; + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>; + status = "okay"; + }; + usart0: serial@f001c000 { status = "okay"; }; @@ -102,6 +159,7 @@ i2c2: i2c@f801c000 { dmas = <0>, <0>; /* Do not use DMA for i2c2 */ + pinctrl-0 = <&pinctrl_i2c2_pu>; status = "okay"; }; @@ -116,6 +174,18 @@ pinctrl@fffff200 { board { + pinctrl_i2c0_pu: i2c0_pu { + atmel,pins = + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_i2c2_pu: i2c2_pu { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; + }; + pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 366fc2cbcd64..c0e0eae16a27 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -641,7 +641,7 @@ trigger@3 { reg = <3>; trigger-name = "external"; - trigger-value = <0x13>; + trigger-value = <0xd>; trigger-external; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3be973e9889a..b309c1c6e848 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -29,6 +29,7 @@ i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { @@ -45,6 +46,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -182,6 +195,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -191,6 +206,19 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; + status = "disabled"; + }; + + ssc2: ssc@fffc4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffc4000 0x4000>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + clocks = <&ssc2_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -385,6 +413,22 @@ }; }; + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 26 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 27 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <AT91_PIOC 28 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = @@ -524,17 +568,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -545,7 +596,8 @@ reg = <0>; atmel,clk-input-range = <1000000 32000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; }; pllb: pllbck { @@ -554,9 +606,9 @@ interrupts-extended = <&pmc AT91_PMC_LOCKB>; clocks = <&main>; reg = <1>; - atmel,clk-input-range = <1000000 32000000>; + atmel,clk-input-range = <1000000 5000000>; #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; }; mck: masterck { @@ -565,16 +617,48 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; usb: usbck { compatible = "atmel,at91rm9200-clk-usb"; #clock-cells = <0>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; clocks = <&pllb>; }; + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = <AT91_PMC_PCKRDY(3)>; + }; + }; + systemck { compatible = "atmel,at91rm9200-clk-system"; #address-cells = <1>; @@ -592,6 +676,30 @@ clocks = <&usb>; }; + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + hclk0: hclk0 { #clock-cells = <0>; reg = <16>; @@ -666,6 +774,21 @@ reg = <13>; }; + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc2_clk: ssc2_clk { + #clock-cells = <0>; + reg = <16>; + }; + tc0_clk: tc0_clk { #clock-cells = <0>; reg = <17>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9cdaecff13b3..ace6bf197b70 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -136,6 +136,36 @@ >; /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_adtrg: adc0_adtrg { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad0: adc0_ad0 { + atmel,pins = <AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad1: adc0_ad1 { + atmel,pins = <AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad2: adc0_ad2 { + atmel,pins = <AT91_PIOD 22 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad3: adc0_ad3 { + atmel,pins = <AT91_PIOD 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad4: adc0_ad4 { + atmel,pins = <AT91_PIOD 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad5: adc0_ad5 { + atmel,pins = <AT91_PIOD 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad6: adc0_ad6 { + atmel,pins = <AT91_PIOD 26 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_adc0_ad7: adc0_ad7 { + atmel,pins = <AT91_PIOD 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -634,10 +664,9 @@ adc0: adc@fffb0000 { #address-cells = <1>; #size-cells = <0>; - compatible = "atmel,at91sam9260-adc"; + compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; - atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 7ff665a8c708..9f5b0a674995 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91sam9g45.dtsi" +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9M10G45-EK"; @@ -130,6 +131,21 @@ status = "okay"; }; + adc0: adc@fffb0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_ad6 + &pinctrl_adc0_ad7>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + pwm0: pwm@fffb8000 { status = "okay"; @@ -216,14 +232,14 @@ d6 { label = "d6"; - pwms = <&pwm0 3 5000 0>; + pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - pwms = <&pwm0 1 5000 0>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; max-brightness = <255>; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 9f04808fc697..d1b82e6635d5 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9N12 SoC"; @@ -49,6 +50,18 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -75,8 +88,280 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; - reg = <0xfffffc00 0x100>; + compatible = "atmel,at91sam9n12-pmc"; + reg = <0xfffffc00 0x200>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, + <695000000 750000000 1 0>, + <645000000 700000000 2 0>, + <595000000 650000000 3 0>, + <545000000 600000000 0 1>, + <495000000 555000000 1 1>, + <445000000 500000000 1 2>, + <400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <30000000 100000000 0>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9n12-clk-usb"; + #clock-cells = <0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + lcdck: lcdck { + #clock-cells = <0>; + reg = <3>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + fuse_clk: fuse_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb_clk: tcb_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + + sha_clk: sha_clk { + #clock-cells = <0>; + reg = <27>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + + aes_clk: aes_clk { + #clock-cells = <0>; + reg = <29>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; }; rstc@fffffe00 { @@ -88,6 +373,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; shdwc@fffffe10 { @@ -95,12 +381,38 @@ reg = <0xfffffe10 0x10>; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; + }; + mmc0: mmc@f0008000 { compatible = "atmel,hsmci"; reg = <0xf0008000 0x600>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -110,12 +422,16 @@ compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; dma: dma-controller@ffffec00 { @@ -123,6 +439,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -392,6 +710,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -402,6 +721,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -412,6 +732,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -422,6 +743,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -431,6 +753,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -443,6 +767,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -452,6 +778,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -461,6 +789,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -470,6 +800,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -479,6 +811,8 @@ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -493,6 +827,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -507,6 +842,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -521,6 +857,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -535,6 +873,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -554,6 +894,7 @@ reg = <0xf8034000 0x300>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; }; @@ -584,6 +925,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 924a6a6ffd0f..64bbe46e4f90 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 92a52faebef7..1da183155eee 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/clock/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> / { model = "Atmel AT91SAM9RL family SoC"; @@ -32,6 +33,7 @@ i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { @@ -48,12 +50,43 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + clocks { + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + fb0: fb@00500000 { + compatible = "atmel,at91sam9rl-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; @@ -187,6 +220,16 @@ status = "disabled"; }; + pwm0: pwm@fffc8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffc8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + clock-names = "pwm_clk"; + status = "disabled"; + }; + spi0: spi@fffcc000 { #address-cells = <1>; #size-cells = <0>; @@ -200,6 +243,111 @@ status = "disabled"; }; + adc0: adc@fffd0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-adc"; + reg = <0xfffd0000 0x100>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; + atmel,adc-use-external-triggers; + atmel,adc-channels-used = <0x3f>; + atmel,adc-vref = <3300>; + atmel,adc-startup-time = <40>; + atmel,adc-res = <8 10>; + atmel,adc-res-names = "lowres", "highres"; + atmel,adc-use-res = "highres"; + + trigger@0 { + reg = <0>; + trigger-name = "timer-counter-0"; + trigger-value = <0x1>; + }; + trigger@1 { + reg = <1>; + trigger-name = "timer-counter-1"; + trigger-value = <0x3>; + }; + + trigger@2 { + reg = <2>; + trigger-name = "timer-counter-2"; + trigger-value = <0x5>; + }; + + trigger@3 { + reg = <3>; + trigger-name = "external"; + trigger-value = <0x13>; + trigger-external; + }; + }; + + usb0: gadget@fffd4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91sam9rl-udc"; + reg = <0x00600000 0x100000>, + <0xfffd4000 0x4000>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; + status = "disabled"; + + ep0 { + reg = <0>; + atmel,fifo-size = <64>; + atmel,nb-banks = <1>; + }; + + ep1 { + reg = <1>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep2 { + reg = <2>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <2>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep3 { + reg = <3>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep4 { + reg = <4>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + }; + + ep5 { + reg = <5>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + + ep6 { + reg = <6>; + atmel,fifo-size = <1024>; + atmel,nb-banks = <3>; + atmel,can-dma; + atmel,can-isoc; + }; + }; + ramc0: ramc@ffffea00 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffea00 0x200>; @@ -238,6 +386,44 @@ <0x003fffff 0x0001ff3c>; /* pioD */ /* shared pinctrl settings */ + adc0 { + pinctrl_adc0_ts: adc0_ts-0 { + atmel,pins = + <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad0: adc0_ad0-0 { + atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad1: adc0_ad1-0 { + atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad2: adc0_ad2-0 { + atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad3: adc0_ad3-0 { + atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad4: adc0_ad4-0 { + atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_ad5: adc0_ad5-0 { + atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_adc0_adtrg: adc0_adtrg-0 { + atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = @@ -246,6 +432,33 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, + <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + }; + i2c_gpio0 { pinctrl_i2c_gpio0: i2c_gpio0-0 { atmel,pins = @@ -307,6 +520,61 @@ }; }; + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 { + atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + spi0 { + pinctrl_spi0: spi0-0 { + atmel,pins = + <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, + <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = @@ -339,15 +607,6 @@ }; }; - spi0 { - pinctrl_spi0: spi0-0 { - atmel,pins = - <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; - }; - }; - tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; @@ -548,17 +807,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -568,8 +821,9 @@ clocks = <&main>; reg = <0>; atmel,clk-input-range = <1000000 32000000>; - #atmel,pll-clk-output-range-cells = <4>; - atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 200000000 0>, + <190000000 240000000 2>; }; utmi: utmick { @@ -586,7 +840,7 @@ interrupts-extended = <&pmc AT91_PMC_MCKRDY>; clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; atmel,clk-output-range = <0 94000000>; - atmel,clk-divisors = <1 2 4 3>; + atmel,clk-divisors = <1 2 4 0>; }; prog: progck { @@ -769,6 +1023,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index cddb37825fad..d4a010e40fe3 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -32,6 +41,37 @@ }; ahb { + fb0: fb@00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; @@ -92,6 +132,43 @@ status = "okay"; }; + adc0: adc@fffd0000 { + pinctrl-names = "default"; + pinctrl-0 = < + &pinctrl_adc0_ad0 + &pinctrl_adc0_ad1 + &pinctrl_adc0_ad2 + &pinctrl_adc0_ad3 + &pinctrl_adc0_ad4 + &pinctrl_adc0_ad5 + &pinctrl_adc0_adtrg>; + atmel,adc-ts-wires = <4>; + status = "okay"; + }; + + usb0: gadget@fffd4000 { + atmel,vbus-gpio = <&pioA 8 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + spi0: spi@fffcc000 { + status = "okay"; + cs-gpios = <&pioA 28 0>, <0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; + + pwm0: pwm@fffc8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm1_2>, + <&pinctrl_pwm0_pwm2_2>; + }; + dbgu: serial@fffff200 { status = "okay"; }; @@ -117,18 +194,24 @@ }; }; - leds { - compatible = "gpio-leds"; + pwmleds { + compatible = "pwm-leds"; ds1 { label = "ds1"; - gpios = <&pioD 15 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; ds2 { label = "ds2"; - gpios = <&pioD 16 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; }; + }; + + leds { + compatible = "gpio-leds"; ds3 { label = "ds3"; @@ -154,4 +237,12 @@ gpio-key,wakeup; }; }; + + i2c@0 { + status = "okay"; + }; + + i2c@1 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index fc13c9240da8..1a57298636a5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9x5 family SoC"; @@ -51,6 +52,24 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -77,8 +96,272 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9x5-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; + }; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc>, <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 1 2 + 400000000 450000000 1 3>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91sam9x5-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + atmel,master-clk-have-div3-pres; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9x5-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + smd: smdclk { + compatible = "atmel,at91sam9x5-clk-smd"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + smdck: smdck { + #clock-cells = <0>; + reg = <4>; + clocks = <&smd>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91sam9x5-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioAB_clk: pioAB_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioCD_clk: pioCD_clk { + #clock-cells = <0>; + reg = <3>; + }; + + smd_clk: smd_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <7>; + }; + + twi0_clk: twi0_clk { + reg = <9>; + #clock-cells = <0>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi2_clk: twi2_clk { + #clock-cells = <0>; + reg = <11>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <14>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <15>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <18>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <19>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma1_clk: dma1_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <23>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <26>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffe00 { @@ -95,18 +378,47 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; + }; + + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_osc>; + }; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; dma0: dma-controller@ffffec00 { @@ -114,6 +426,8 @@ reg = <0xffffec00 0x200>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; dma1: dma-controller@ffffee00 { @@ -121,6 +435,8 @@ reg = <0xffffee00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma1_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff400 { @@ -453,6 +769,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioB: gpio@fffff600 { @@ -464,6 +781,7 @@ #gpio-lines = <19>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioAB_clk>; }; pioC: gpio@fffff800 { @@ -474,6 +792,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; pioD: gpio@fffffa00 { @@ -485,6 +804,7 @@ #gpio-lines = <22>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCD_clk>; }; }; @@ -497,6 +817,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -507,6 +829,8 @@ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -519,6 +843,8 @@ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; pinctrl-names = "default"; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -530,6 +856,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -539,6 +867,8 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -548,6 +878,8 @@ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -557,6 +889,8 @@ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -571,6 +905,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -585,6 +920,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -599,6 +935,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&twi2_clk>; status = "disabled"; }; @@ -608,6 +945,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -617,6 +956,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -626,6 +967,9 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, + <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -673,6 +1017,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -687,6 +1033,8 @@ dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -805,6 +1153,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>, + <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -812,6 +1163,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi new file mode 100644 index 000000000000..f44ab7702a12 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi @@ -0,0 +1,31 @@ +/* + * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1 + * Ethernet interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + can0_clk: can0_clk { + #clock-cells = <0>; + reg = <29>; + }; + + can1_clk: can1_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi new file mode 100644 index 000000000000..98bc877a68ef --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * Image Sensor Interface. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi new file mode 100644 index 000000000000..485302e8233d --- /dev/null +++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi @@ -0,0 +1,26 @@ +/* + * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an + * LCD controller. + * + * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com> + * + * Licensed under GPLv2. + */ + +#include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + ahb { + apb { + pmc: pmc@fffffc00 { + periphck { + lcdc_clk: lcdc_clk { + #clock-cells = <0>; + reg = <25>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi index 55731ffba764..57e89d1d0325 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi @@ -43,12 +43,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <24>; + }; + }; + }; + macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb0_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi index 77425a627a94..663676c02861 100644 --- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi @@ -31,12 +31,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + macb1_clk: macb1_clk { + #clock-cells = <0>; + reg = <27>; + }; + }; + }; + macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb1_rmii>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 6801106fa1f8..140217a54384 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -42,12 +42,23 @@ }; }; + pmc: pmc@fffffc00 { + periphck { + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <8>; + }; + }; + }; + usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x200>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 4a5ee5cc115a..8413e21192eb 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -23,6 +23,14 @@ }; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 9d72674049d6..bb22842a0826 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -39,6 +39,11 @@ }; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <29>; + }; + axi { compatible = "simple-bus"; #address-cells = <1>; @@ -167,6 +172,7 @@ compatible = "sirf,prima2-dspif"; reg = <0xa8000000 0x10000>; interrupts = <9>; + resets = <&rstc 1>; }; gps@a8010000 { @@ -174,6 +180,7 @@ reg = <0xa8010000 0x10000>; interrupts = <7>; clocks = <&clks 9>; + resets = <&rstc 2>; }; dsp@a9000000 { @@ -181,6 +188,7 @@ reg = <0xa9000000 0x1000000>; interrupts = <8>; clocks = <&clks 8>; + resets = <&rstc 0>; }; }; @@ -195,6 +203,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { @@ -297,9 +306,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - cs-gpios = <&gpio 0 0>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -312,8 +321,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; @@ -554,6 +564,18 @@ sirf,function = "usp0_uart_nostreamctrl"; }; }; + usp0_only_utfs_pins_a: usp0@2 { + usp0 { + sirf,pins = "usp0_only_utfs_grp"; + sirf,function = "usp0_only_utfs"; + }; + }; + usp0_only_urfs_pins_a: usp0@3 { + usp0 { + sirf,pins = "usp0_only_urfs_grp"; + sirf,function = "usp0_only_urfs"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts new file mode 100644 index 000000000000..a9d60471d9ff --- /dev/null +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -0,0 +1,51 @@ +/* + * arch/arm/boot/dts/axm5516-amarillo.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +#include "axm55xx.dtsi" +#include "axm5516-cpus.dtsi" + +/ { + model = "Amarillo AXM5516"; + compatible = "lsi,axm5516-amarillo", "lsi,axm5516"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0x02 0x00000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi new file mode 100644 index 000000000000..b85f360cb125 --- /dev/null +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm5516-cpus.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x00>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x01>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x02>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x03>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + }; +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi new file mode 100644 index 000000000000..ea288f0a1d39 --- /dev/null +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm55xx.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + +#include "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + timer = &timer0; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clk_ref0: clk_ref0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref1: clk_ref1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref2: clk_ref2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + }; + + gic: interrupt-controller@2001001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x20 0x01001000 0 0x1000>, + <0x20 0x01002000 0 0x1000>, + <0x20 0x01004000 0 0x2000>, + <0x20 0x01006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial1: uart@2010081000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10081000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial2: uart@2010082000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10082000 0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial3: uart@2010083000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10083000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer0: timer@2010091000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x20 0x10091000 0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "okay"; + }; + + gpio0: gpio@2010092000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10092000 0x00 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@2010093000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10093000 0x00 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; +}; + +/* + Local Variables: + mode: C + End: +*/ diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 64d069bcc409..6b05ae6d476f 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -193,6 +193,14 @@ status = "disabled"; }; + pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xcc>; + clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>; + #pwm-cells = <3>; + status = "disabled"; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index af3da55eef49..9ce91dd60cb6 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -69,6 +69,10 @@ status = "okay"; }; + pwm: pwm@3e01a000 { + status = "okay"; + }; + usbotg: usb@3f120000 { vusb_d-supply = <&usbldo_reg>; vusb_a-supply = <&iosr1_reg>; diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi index dfadaaa89b05..066adfb10bd5 100644 --- a/arch/arm/boot/dts/bcm59056.dtsi +++ b/arch/arm/boot/dts/bcm59056.dtsi @@ -70,5 +70,26 @@ vsr_reg: vsr { }; + + gpldo1_reg: gpldo1 { + }; + + gpldo2_reg: gpldo2 { + }; + + gpldo3_reg: gpldo3 { + }; + + gpldo4_reg: gpldo4 { + }; + + gpldo5_reg: gpldo5 { + }; + + gpldo6_reg: gpldo6 { + }; + + vbus_reg: vbus { + }; }; }; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 56a1af2f1052..2477dac4d643 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -37,24 +38,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <400000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -72,6 +59,11 @@ cache-level = <2>; }; + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + gic: interrupt-controller@ad1000 { compatible = "arm,cortex-a9-gic"; reg = <0xad1000 0x1000>, <0xad0100 0x0100>; @@ -83,7 +75,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -94,11 +86,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -107,7 +171,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -116,7 +180,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -125,7 +189,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -134,7 +198,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -143,7 +207,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -152,7 +216,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -161,7 +225,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -176,6 +240,14 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -184,13 +256,48 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <11>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -200,7 +307,9 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -210,10 +319,32 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <10>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart2_pmux>; + pinctrl-names = "default"; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM4"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM5"; + function = "uart1"; + }; + + uart2_pmux: uart2-pmux { + groups = "GSM3"; + function = "uart2"; + }; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 094968c27533..cc1df65da504 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/clock/berlin2.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -30,24 +31,10 @@ }; }; - clocks { - smclk: sysmgr-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - cfgclk: cfg-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - sysclk: system-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <300000000>; - }; + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; }; soc { @@ -76,7 +63,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&sysclk>; + clocks = <&chip CLKID_TWD>; }; apb@e80000 { @@ -87,11 +74,83 @@ ranges = <0 0xe80000 0x10000>; interrupt-parent = <&aic>; + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -100,7 +159,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -109,7 +168,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -118,7 +177,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -127,7 +186,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -136,7 +195,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -145,7 +204,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -154,7 +213,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&cfgclk>; + clocks = <&chip CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -169,6 +228,19 @@ }; }; + chip: chip-control@ea0000 { + compatible = "marvell,berlin2cd-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>; + clocks = <&refclk>; + clock-names = "refclk"; + + uart0_pmux: uart0-pmux { + groups = "G6"; + function = "uart0"; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -177,13 +249,45 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <0>; + }; + }; + uart0: serial@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; reg-shift = <2>; reg-io-width = <1>; interrupts = <8>; - clocks = <&smclk>; + clocks = <&refclk>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; status = "disabled"; }; @@ -193,10 +297,15 @@ reg-shift = <2>; reg-io-width = <1>; interrupts = <9>; - clocks = <&smclk>; + clocks = <&refclk>; status = "disabled"; }; + sysctrl: system-controller@d000 { + compatible = "marvell,berlin2cd-system-ctrl"; + reg = <0xd000 0x100>; + }; + sic: interrupt-controller@e000 { compatible = "snps,dw-apb-ictl"; reg = <0xe000 0x400>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts new file mode 100644 index 000000000000..995150f93795 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +#include "berlin2q.dtsi" + +/ { + model = "Marvell BG2-Q DMP"; + compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + choosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; +}; + +&sdhci1 { + broken-cd; + sdhci,wp-inverted; + status = "okay"; +}; + +&sdhci2 { + non-removable; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi new file mode 100644 index 000000000000..635a16a64cb4 --- /dev/null +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -0,0 +1,363 @@ +/* + * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <dt-bindings/clock/berlin2q.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + model = "Marvell Armada 1500 pro (BG2-Q) SoC"; + compatible = "marvell,berlin2q", "marvell,berlin"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <3>; + }; + }; + + refclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xf7000000 0x1000000>; + interrupt-parent = <&gic>; + + sdhci0: sdhci@ab0000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0000 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci1: sdhci@ab0800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab0800 0x200>; + clocks = <&chip CLKID_SDIO1XIN>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhci2: sdhci@ab1000 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xab1000 0x200>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&chip CLKID_SDIO1XIN>; + status = "disabled"; + }; + + l2: l2-cache-controller@ac0000 { + compatible = "arm,pl310-cache"; + reg = <0xac0000 0x1000>; + cache-level = <2>; + }; + + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + + local-timer@ad0600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xad0600 0x20>; + clocks = <&chip CLKID_TWD>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + }; + + gic: interrupt-controller@ad1000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xad1000 0x1000>, <0xad0100 0x100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + + timer0: timer@2c00 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c00 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + interrupts = <8>; + }; + + timer1: timer@2c14 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c14 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer2: timer@2c28 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c28 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer3: timer@2c3c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c3c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer4: timer@2c50 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c50 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer5: timer@2c64 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c64 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer6: timer@2c78 { + compatible = "snps,dw-apb-timer"; + reg = <0x2c78 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + timer7: timer@2c8c { + compatible = "snps,dw-apb-timer"; + reg = <0x2c8c 0x14>; + clocks = <&chip CLKID_CFG>; + clock-names = "timer"; + status = "disabled"; + }; + + aic: interrupt-controller@3800 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio4: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + gpio5: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + }; + + chip: chip-control@ea0000 { + compatible = "marvell,berlin2q-chip-ctrl"; + #clock-cells = <1>; + reg = <0xea0000 0x400>, <0xdd0170 0x10>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + apb@fc0000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xfc0000 0x10000>; + interrupt-parent = <&sic>; + + uart0: uart@9000 { + compatible = "snps,dw-apb-uart"; + reg = <0x9000 0x100>; + interrupt-parent = <&sic>; + interrupts = <8>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart0_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + uart1: uart@a000 { + compatible = "snps,dw-apb-uart"; + reg = <0xa000 0x100>; + interrupt-parent = <&sic>; + interrupts = <9>; + clocks = <&refclk>; + reg-shift = <2>; + pinctrl-0 = <&uart1_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sysctrl: pin-controller@d000 { + compatible = "marvell,berlin2q-system-ctrl"; + reg = <0xd000 0x100>; + + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM14"; + function = "uart1"; + }; + }; + + sic: interrupt-controller@e000 { + compatible = "snps,dw-apb-ictl"; + reg = <0xe000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 5babba0a3a75..4adc28039c30 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -#include "dra7.dtsi" +#include "dra74x.dtsi" / { - model = "TI DRA7"; - compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; + model = "TI DRA742"; + compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"; memory { device_type = "memory"; @@ -93,6 +93,64 @@ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; + + qspi1_pins: pinmux_qspi1_pins { + pinctrl-single,pins = < + 0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */ + 0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */ + 0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ + 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ + 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ + 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ + 0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ + 0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ + 0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ + >; + }; + + usb1_pins: pinmux_usb1_pins { + pinctrl-single,pins = < + 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ + >; + }; + + usb2_pins: pinmux_usb2_pins { + pinctrl-single,pins = < + 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ + >; + }; + + nand_flash_x16: nand_flash_x16 { + /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch + * So NAND flash requires following switch settings: + * SW5.9 (GPMC_WPN) = LOW + * SW5.1 (NAND_BOOTn) = HIGH */ + pinctrl-single,pins = < + 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ + 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ + 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ + 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ + 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ + 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ + 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ + 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ + 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ + 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ + 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ + 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ + 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ + 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ + 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ + 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ + 0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ + 0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */ + >; + }; }; &i2c1 { @@ -273,3 +331,167 @@ &cpu0 { cpu0-supply = <&smps123_reg>; }; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi1_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "s25fl256s1"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first four physical blocks + * for a valid file to boot and the flash here is + * 64KiB block size. + */ + partition@0 { + label = "QSPI.SPL"; + reg = <0x00000000 0x000010000>; + }; + partition@1 { + label = "QSPI.SPL.backup1"; + reg = <0x00010000 0x00010000>; + }; + partition@2 { + label = "QSPI.SPL.backup2"; + reg = <0x00020000 0x00010000>; + }; + partition@3 { + label = "QSPI.SPL.backup3"; + reg = <0x00030000 0x00010000>; + }; + partition@4 { + label = "QSPI.u-boot"; + reg = <0x00040000 0x00100000>; + }; + partition@5 { + label = "QSPI.u-boot-spl-os"; + reg = <0x00140000 0x00010000>; + }; + partition@6 { + label = "QSPI.u-boot-env"; + reg = <0x00150000 0x00010000>; + }; + partition@7 { + label = "QSPI.u-boot-env.backup1"; + reg = <0x00160000 0x0010000>; + }; + partition@8 { + label = "QSPI.kernel"; + reg = <0x00170000 0x0800000>; + }; + partition@9 { + label = "QSPI.file-system"; + reg = <0x00970000 0x01690000>; + }; + }; +}; + +&usb1 { + dr_mode = "peripheral"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; +}; + +&usb2 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_pins>; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_flash_x16>; + ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ + nand@0,0 { + reg = <0 0 4>; /* device IO registers */ + ti,nand-ecc-opt = "bch8"; + ti,elm-id = <&elm>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <40>; + gpmc,cs-wr-off-ns = <40>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <30>; + gpmc,adv-wr-off-ns = <30>; + gpmc,we-on-ns = <5>; + gpmc,we-off-ns = <25>; + gpmc,oe-on-ns = <2>; + gpmc,oe-off-ns = <20>; + gpmc,access-ns = <20>; + gpmc,wr-access-ns = <40>; + gpmc,rd-cycle-ns = <40>; + gpmc,wr-cycle-ns = <40>; + gpmc,wait-pin = <0>; + gpmc,wait-on-read; + gpmc,wait-on-write; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + /* MTD partition table */ + /* All SPL-* partitions are sized to minimal length + * which can be independently programmable. For + * NAND flash this is equal to size of erase-block */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "NAND.SPL"; + reg = <0x00000000 0x000020000>; + }; + partition@1 { + label = "NAND.SPL.backup1"; + reg = <0x00020000 0x00020000>; + }; + partition@2 { + label = "NAND.SPL.backup2"; + reg = <0x00040000 0x00020000>; + }; + partition@3 { + label = "NAND.SPL.backup3"; + reg = <0x00060000 0x00020000>; + }; + partition@4 { + label = "NAND.u-boot-spl-os"; + reg = <0x00080000 0x00040000>; + }; + partition@5 { + label = "NAND.u-boot"; + reg = <0x000c0000 0x00100000>; + }; + partition@6 { + label = "NAND.u-boot-env"; + reg = <0x001c0000 0x00020000>; + }; + partition@7 { + label = "NAND.u-boot-env"; + reg = <0x001e0000 0x00020000>; + }; + partition@8 { + label = "NAND.kernel"; + reg = <0x00200000 0x00800000>; + }; + partition@9 { + label = "NAND.file-system"; + reg = <0x00a00000 0x0f600000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 149b55099935..c29945e07c5a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -33,33 +33,6 @@ serial5 = &uart6; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <1>; - }; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -99,13 +72,13 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x2000>, - <0x44800000 0x3000>; + reg = <0x44000000 0x1000000>, + <0x45000000 0x1000>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; @@ -789,6 +762,228 @@ dma-names = "tx0", "rx0"; status = "disabled"; }; + + qspi: qspi@4b300000 { + compatible = "ti,dra7xxx-qspi"; + reg = <0x4b300000 0x100>; + reg-names = "qspi_base"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "qspi"; + clocks = <&qspi_gfclk_div>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <0 343 0x4>; + status = "disabled"; + }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a090000 0x20>; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4A096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + + omap_control_usb2phy1: control-phy@4a002300 { + compatible = "ti,control-phy-usb2"; + reg = <0x4a002300 0x4>; + reg-names = "power"; + }; + + omap_control_usb3phy1: control-phy@4a002370 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002370 0x4>; + reg-names = "power"; + }; + + omap_control_usb2phy2: control-phy@0x4a002e74 { + compatible = "ti,control-phy-usb2-dra7"; + reg = <0x4a002e74 0x4>; + reg-names = "power"; + }; + + /* OCP2SCP1 */ + ocp2scp@4a080000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0x4a080000 0x20>; + ti,hwmods = "ocp2scp1"; + + usb2_phy1: phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x400>; + ctrl-module = <&omap_control_usb2phy1>; + clocks = <&usb_phy1_always_on_clk32k>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb2_phy2: phy@4a085000 { + compatible = "ti,omap-usb2"; + reg = <0x4a085000 0x400>; + ctrl-module = <&omap_control_usb2phy2>; + clocks = <&usb_phy2_always_on_clk32k>, + <&usb_otg_ss2_refclk960m>; + clock-names = "wkupclk", + "refclk"; + #phy-cells = <0>; + }; + + usb3_phy1: phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb3phy1>; + clocks = <&usb_phy3_always_on_clk32k>, + <&sys_clkin1>, + <&usb_otg_ss1_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; + #phy-cells = <0>; + }; + }; + + omap_dwc3_1@48880000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss1"; + reg = <0x48880000 0x10000>; + interrupts = <0 77 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb1: usb@48890000 { + compatible = "snps,dwc3"; + reg = <0x48890000 0x17000>; + interrupts = <0 76 4>; + phys = <&usb2_phy1>, <&usb3_phy1>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + maximum-speed = "super-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_2@488c0000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss2"; + reg = <0x488c0000 0x10000>; + interrupts = <0 92 4>; + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + usb2: usb@488d0000 { + compatible = "snps,dwc3"; + reg = <0x488d0000 0x17000>; + interrupts = <0 78 4>; + phys = <&usb2_phy2>; + phy-names = "usb2-phy"; + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ + omap_dwc3_3@48900000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss3"; + reg = <0x48900000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb3: usb@48910000 { + compatible = "snps,dwc3"; + reg = <0x48910000 0x17000>; + /* interrupts = <0 93 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + omap_dwc3_4@48940000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss4"; + reg = <0x48940000 0x10000>; + /* interrupts = <0 TBD 4>; */ + #address-cells = <1>; + #size-cells = <1>; + utmi-mode = <2>; + ranges; + status = "disabled"; + usb4: usb@48950000 { + compatible = "snps,dwc3"; + reg = <0x48950000 0x17000>; + /* interrupts = <0 TBD 4>; */ + tx-fifo-resize; + maximum-speed = "high-speed"; + dr_mode = "otg"; + }; + }; + + elm: elm@48078000 { + compatible = "ti,am3352-elm"; + reg = <0x48078000 0xfc0>; /* device IO registers */ + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "elm"; + status = "disabled"; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + reg = <0x50000000 0x37c>; /* device IO registers */ + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts new file mode 100644 index 000000000000..514702348818 --- /dev/null +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" + +/ { + model = "TI DRA722"; + compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1024 MB */ + }; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi new file mode 100644 index 000000000000..f1ec22f6ebf4 --- /dev/null +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra722", "ti,dra72", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi new file mode 100644 index 000000000000..a4e8bb9f95c0 --- /dev/null +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +#include "dra7.dtsi" + +/ { + compatible = "ti,dra742", "ti,dra74", "ti,dra7"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points = < + /* kHz uV */ + 1000000 1060000 + 1176000 1160000 + >; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index cfb8fc753f50..c7676871d9c0 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1386,6 +1386,14 @@ ti,dividers = <1>, <8>; }; + l3init_960m_gfclk: l3init_960m_gfclk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&dpll_usb_clkdcoldo>; + ti,bit-shift = <8>; + reg = <0x06c0>; + }; + dss_32khz_clk: dss_32khz_clk { #clock-cells = <0>; compatible = "ti,gate-clock"; @@ -1533,7 +1541,7 @@ usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x13f0>; }; @@ -1541,7 +1549,7 @@ usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m { #clock-cells = <0>; compatible = "ti,gate-clock"; - clocks = <&dpll_usb_clkdcoldo>; + clocks = <&l3init_960m_gfclk>; ti,bit-shift = <8>; reg = <0x1340>; }; diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi new file mode 100644 index 000000000000..47b92c150f4e --- /dev/null +++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi @@ -0,0 +1,475 @@ +/* + * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, + <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, + <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpk0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpm2-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c0: fimc-is-i2c0 { + samsung,pins = "gpm4-0", "gpm4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_i2c1: fimc-is-i2c1 { + samsung,pins = "gpm4-2", "gpm4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpm3-5", "gpm3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi new file mode 100644 index 000000000000..3e678fa335bf --- /dev/null +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -0,0 +1,444 @@ +/* + * Samsung's Exynos3250 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos3250.h> + +/ { + compatible = "samsung,exynos3250"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + spi0 = &spi_0; + spi1 = &spi_1; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fixed-rate-clocks { + #address-cells = <1>; + #size-cells = <0>; + + xusbxti: clock@0 { + compatible = "fixed-clock"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xusbxti"; + }; + + xxti: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xxti"; + }; + + xtcxo: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + clock-frequency = <0>; + #clock-cells = <0>; + clock-output-names = "xtcxo"; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@3f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x3f000 0x1000>; + }; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + sys_reg: syscon@10010000 { + compatible = "samsung,exynos3-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos3250-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + cmu: clock-controller@10030000 { + compatible = "samsung,exynos3250-cmu"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + rtc: rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 73 0>, <0 74 0>; + status = "disabled"; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, + <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 225 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 48 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos3250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 240 0>; + }; + + mshc_0: mshc@12510000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12510000 0x1000>; + interrupts = <0 142 0>; + clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mshc_1: mshc@12520000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12520000 0x1000>; + interrupts = <0 143 0>; + clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 138 0>; + clocks = <&cmu CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 139 0>; + clocks = <&cmu CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + adc: adc@126C0000 { + compatible = "samsung,exynos-adc-v3"; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + clock-names = "adc", "sclk_tsadc"; + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + serial_0: serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 109 0>; + clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 110 0>; + clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + i2c_0: i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 113 0>; + clocks = <&cmu CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + status = "disabled"; + }; + + i2c_1: i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 114 0>; + clocks = <&cmu CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "disabled"; + }; + + i2c_2: i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 115 0>; + clocks = <&cmu CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; + status = "disabled"; + }; + + i2c_3: i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 116 0>; + clocks = <&cmu CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; + status = "disabled"; + }; + + i2c_4: i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 117 0>; + clocks = <&cmu CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; + + i2c_5: i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 118 0>; + clocks = <&cmu CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; + + i2c_6: i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 119 0>; + clocks = <&cmu CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; + + i2c_7: i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 120 0>; + clocks = <&cmu CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 121 0>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 122 0>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + status = "disabled"; + }; + + pwm: pwm@139D0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x139D0000 0x1000>; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 108 0>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 18 0>, <0 19 0>; + }; + }; +}; + +#include "exynos3250-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 2f8bcd068d17..b8ece4be41ca 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -20,6 +20,7 @@ */ #include <dt-bindings/clock/exynos4.h> +#include <dt-bindings/clock/exynos-audss-clk.h> #include "skeleton.dtsi" / { @@ -45,6 +46,23 @@ fimc3 = &fimc_3; }; + clock_audss: clock-controller@03810000 { + compatible = "samsung,exynos4210-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + }; + + i2s0: i2s@03830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + clocks = <&clock_audss EXYNOS_I2S_BUS>; + clock-names = "iis"; + dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx", "tx-sec"; + samsung,idma-addr = <0x03000000>; + status = "disabled"; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -110,6 +128,11 @@ reg = <0x10010000 0x400>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4210-pmu", "syscon"; + reg = <0x10020000 0x4000>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; @@ -117,7 +140,7 @@ samsung,power-domain = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; - clocks = <&clock 286>, <&clock 143>; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; clock-names = "bus_clk", "pll_clk"; status = "disabled"; #address-cells = <1>; @@ -129,12 +152,10 @@ status = "disabled"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; @@ -273,6 +294,27 @@ status = "disabled"; }; + exynos_usbphy: exynos-usbphy@125B0000 { + compatible = "samsung,exynos4210-usb2-phy"; + reg = <0x125B0000 0x100>; + samsung,pmureg-phandle = <&pmu_system_controller>; + clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + hsotg@12480000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0x12480000 0x20000>; + interrupts = <0 71 0>; + clocks = <&clock CLK_USB_DEVICE>; + clock-names = "otg"; + phys = <&exynos_usbphy 0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; @@ -291,6 +333,26 @@ status = "disabled"; }; + i2s1: i2s@13960000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13960000 0x100>; + clocks = <&clock CLK_I2S1>; + clock-names = "iis"; + dmas = <&pdma1 12>, <&pdma1 11>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s@13970000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x13970000 0x100>; + clocks = <&clock CLK_I2S2>; + clock-names = "iis"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; @@ -371,6 +433,8 @@ interrupts = <0 60 0>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; status = "disabled"; }; @@ -382,6 +446,8 @@ interrupts = <0 61 0>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; status = "disabled"; }; @@ -393,6 +459,8 @@ interrupts = <0 62 0>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; status = "disabled"; }; @@ -404,6 +472,8 @@ interrupts = <0 63 0>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; status = "disabled"; }; @@ -415,6 +485,8 @@ interrupts = <0 64 0>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; status = "disabled"; }; @@ -426,6 +498,8 @@ interrupts = <0 65 0>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 72fb11f7ea21..f767c425d0b5 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + tmu@100C0000 { status = "okay"; }; @@ -251,35 +260,35 @@ up { label = "Up"; gpios = <&gpx2 0 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "Down"; gpios = <&gpx2 1 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "Back"; gpios = <&gpx1 7 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; home { label = "Home"; gpios = <&gpx1 6 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; menu { label = "Menu"; gpios = <&gpx1 5 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 63aa2bb24a4b..f516da9e8b3a 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -88,6 +88,12 @@ }; }; + hsotg@12480000 { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -97,6 +103,10 @@ status = "okay"; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..d50eb3aa708e 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,21 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sysram@02020000 { + smp-sysram@0 { + status = "disabled"; + }; + + smp-sysram@5000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x5000 0x1000>; + }; + + smp-sysram@1f000 { + status = "disabled"; + }; + }; + mct@10050000 { compatible = "none"; }; @@ -53,6 +68,12 @@ enable-active-high; }; + hsotg@12480000 { + vusb_d-supply = <&ldo3_reg>; + vusb_a-supply = <&ldo8_reg>; + status = "okay"; + }; + sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; @@ -62,6 +83,34 @@ status = "okay"; }; + sdhci_sd: sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo5_reg>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + status = "okay"; + }; + + ehci@12580000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + ohci@12590000 { + status = "okay"; + port@0 { + status = "okay"; + }; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + serial@13800000 { status = "okay"; }; @@ -201,6 +250,7 @@ regulator-name = "VUSB+MIPI_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-always-on; }; ldo4_reg: LDO4 { @@ -231,6 +281,7 @@ regulator-name = "VUSB+VDAC_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; ldo9_reg: LDO9 { @@ -413,6 +464,29 @@ compatible = "samsung,s5p6440-pwm"; status = "okay"; }; + + camera { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <>; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; }; &mdma1 { diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..ee3001f38821 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,24 @@ pinctrl2 = &pinctrl_2; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@1f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x1f000 0x1000>; + }; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index e2c0dcab4d81..e925c9fbfb07 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/input/input.h> / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -48,6 +49,14 @@ }; }; + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + pinctrl@11000000 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; @@ -76,37 +85,37 @@ key_home { keypad,row = <0>; keypad,column = <0>; - linux,code = <102>; + linux,code = <KEY_HOME>; }; key_down { keypad,row = <0>; keypad,column = <1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; }; key_up { keypad,row = <1>; keypad,column = <0>; - linux,code = <103>; + linux,code = <KEY_UP>; }; key_menu { keypad,row = <1>; keypad,column = <1>; - linux,code = <139>; + linux,code = <KEY_MENU>; }; key_back { keypad,row = <2>; keypad,column = <0>; - linux,code = <158>; + linux,code = <KEY_BACK>; }; key_enter { keypad,row = <2>; keypad,column = <1>; - linux,code = <28>; + linux,code = <KEY_ENTER>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9583563dd0ef..77878447b312 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -20,7 +20,8 @@ compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; aliases { - i2c8 = &i2c_ak8975; + i2c9 = &i2c_ak8975; + i2c10 = &i2c_cm36651; }; memory { @@ -80,39 +81,67 @@ enable-active-high; }; - /* More to come */ + cam_af_reg: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 4 0>; + enable-active-high; + }; + + cam_isp_core_reg: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "CAM_ISP_CORE_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm0 3 0>; + enable-active-high; + regulator-always-on; + }; + + ps_als_reg: voltage-regulator-5 { + compatible = "regulator-fixed"; + regulator-name = "LED_A_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpj0 5 0>; + enable-active-high; + }; }; gpio-keys { compatible = "gpio-keys"; key-down { - interrupt-parent = <&gpj1>; - interrupts = <2 0>; - gpios = <&gpj1 2 1>; + gpios = <&gpx3 3 1>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - interrupt-parent = <&gpj1>; - interrupts = <1 0>; - gpios = <&gpj1 1 1>; + gpios = <&gpx2 2 1>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - interrupt-parent = <&gpx2>; - interrupts = <7 0>; gpios = <&gpx2 7 1>; linux,code = <116>; label = "power"; debounce-interval = <10>; gpio-key,wakeup; }; + + key-ok { + gpios = <&gpx0 1 1>; + linux,code = <139>; + label = "ok"; + debounce-inteval = <10>; + gpio-key,wakeup; + }; }; adc: adc@126C0000 { @@ -140,6 +169,38 @@ }; }; + i2c_0: i2c@13860000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -503,12 +564,28 @@ status = "okay"; ak8975@0c { - compatible = "ak,ak8975"; + compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; }; }; + i2c_cm36651: i2c-gpio-2 { + compatible = "i2c-gpio"; + gpios = <&gpf0 0 1>, <&gpf0 1 1>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + cm36651@18 { + compatible = "capella,cm36651"; + reg = <0x18>; + interrupt-parent = <&gpx0>; + interrupts = <2 2>; + vled-supply = <&ps_als_reg>; + }; + }; + spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; @@ -586,8 +663,8 @@ status = "okay"; }; - camera { - pinctrl-0 = <&cam_port_b_clk_active>; + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; @@ -607,6 +684,23 @@ status = "okay"; }; + csis_0: csis@11880000 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + csis_1: csis@11890000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; @@ -647,10 +741,11 @@ reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ - clocks = <&clock_cam 1>; - clock-names = "mclk"; + clocks = <&camera 1>; + clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 0>; @@ -665,6 +760,16 @@ }; }; + exynos-usbphy@125B0000 { + status = "okay"; + }; + + hsotg@12480000 { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + status = "okay"; + }; + thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 15d3c0ac2f5f..c42a3e196cd5 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -29,4 +29,8 @@ gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; + + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4412-pmu", "syscon"; + }; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..c5a943df1cd7 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,24 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; @@ -119,6 +137,10 @@ interrupts = <0 72 0>; }; + pmu_system_controller: system-controller@10020000 { + compatible = "samsung,exynos4212-pmu", "syscon"; + }; + g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; @@ -243,4 +265,9 @@ clock-names = "biu", "ciu"; status = "disabled"; }; + + exynos-usbphy@125B0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 090f9830b129..d0de1f50d15b 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "exynos5250.dtsi" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -107,6 +108,7 @@ regulator-name = "VDD_IOPERI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; op_mode = <1>; }; @@ -444,42 +446,42 @@ menu { label = "SW-TACT2"; gpios = <&gpx1 4 1>; - linux,code = <139>; + linux,code = <KEY_MENU>; gpio-key,wakeup; }; home { label = "SW-TACT3"; gpios = <&gpx1 5 1>; - linux,code = <102>; + linux,code = <KEY_HOME>; gpio-key,wakeup; }; up { label = "SW-TACT4"; gpios = <&gpx1 6 1>; - linux,code = <103>; + linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "SW-TACT5"; gpios = <&gpx1 7 1>; - linux,code = <108>; + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "SW-TACT6"; gpios = <&gpx2 0 1>; - linux,code = <158>; + linux,code = <KEY_BACK>; gpio-key,wakeup; }; wakeup { label = "SW-TACT7"; gpios = <&gpx2 1 1>; - linux,code = <143>; + linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 2c1560d52f1a..89ac90f59e2e 100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -240,7 +240,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - hdmiphy@38 { + hdmiphy: hdmiphy@38 { compatible = "samsung,exynos4212-hdmiphy"; reg = <0x38>; }; @@ -304,6 +304,10 @@ hdmi { hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; }; gpio-keys { diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi index 9a49e6804ae1..886cfca044ac 100644 --- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi @@ -351,6 +351,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_bus: i2c7-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 1ce1088a00fb..079fdf9e3f18 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -25,6 +25,13 @@ }; pinctrl@11400000 { + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + sd3_clk: sd3-clk { samsung,pin-drv = <0>; }; @@ -37,6 +44,50 @@ sd3_bus4: sd3-bus-width4 { samsung,pin-drv = <0>; }; + + max98095_en: max98095-en { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@13400000 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; }; gpio-keys { @@ -52,6 +103,12 @@ }; }; + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + i2c-arbitrator { compatible = "i2c-arb-gpio-challenge"; #address-cells = <1>; @@ -65,6 +122,9 @@ wait-retry-us = <3000>; wait-free-us = <50000>; + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + /* Use ID 104 as a hint that we're on physical bus 4 */ i2c_104: i2c@0 { reg = <0>; @@ -82,6 +142,8 @@ reg = <0x1e>; interrupts = <6 0>; interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; wakeup-source; keyboard-controller { @@ -173,6 +235,83 @@ 0x070c0069>; /* LEFT */ }; }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; }; }; @@ -196,6 +335,41 @@ }; }; + i2c@12CD0000 { + max98095: codec@11 { + compatible = "maxim,max98095"; + reg = <0x11>; + pinctrl-0 = <&max98095_en>; + pinctrl-names = "default"; + }; + }; + + i2s0: i2s@03830000 { + status = "okay"; + }; + + sound { + compatible = "google,snow-audio-max98095"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98095>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb3_vbus_reg>; + }; + usb@12110000 { samsung,vbus-gpio = <&gpx1 1 0>; }; @@ -206,4 +380,54 @@ clock-frequency = <24000000>; }; }; + + hdmi { + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + fimd@14400000 { + status = "okay"; + samsung,invert-vclk; + }; + + dp-controller@145B0000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..834fb5a5306f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,24 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; @@ -175,6 +193,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + watchdog@101D0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; @@ -250,7 +273,7 @@ sata_phy: sata-phy@12170000 { compatible = "samsung,exynos5250-sata-phy"; reg = <0x12170000 0x1ff>; - clocks = <&clock 287>; + clocks = <&clock CLK_SATA_PHYCTRL>; clock-names = "sata_phyctrl"; #phy-cells = <0>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -533,22 +556,18 @@ compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; interrupts = <0 72 0>; - usb-phy = <&usb2_phy &usb3_phy>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; }; }; - usb3_phy: usbphy@12100000 { - compatible = "samsung,exynos5250-usb3phy"; + usbdrd_phy: phy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; reg = <0x12100000 0x100>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_USB3>; - clock-names = "ext_xtal", "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbphy-sys { - reg = <0x10040704 0x8>; - }; + clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; }; usb@12110000 { @@ -558,6 +577,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb@12120000 { @@ -567,6 +592,12 @@ clocks = <&clock CLK_USB2>; clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; usb2_phy: usbphy@12130000 { @@ -584,6 +615,16 @@ }; }; + usb2_phy_gen: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; + }; + pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12dd0000 0x100>; @@ -690,6 +731,7 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + samsung,syscon-phandle = <&pmu_system_controller>; }; mixer { @@ -733,7 +775,7 @@ compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 348>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; }; }; diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi new file mode 100644 index 000000000000..f6ee55ea0708 --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi @@ -0,0 +1,574 @@ +/* + * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +&pinctrl_0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + usb3_vbus0_en: usb3-vbus0-en { + samsung,pins = "gpa2-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spdif1_bus: spdif1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c0_hs_bus: i2c0-hs-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c1_hs_bus: i2c1-hs-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c2_hs_bus: i2c2-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c3_hs_bus: i2c3-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb4-2", "gpb4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpb4-4", "gpb4-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpb4-6", "gpb4-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c8_bus: i2c8-bus { + samsung,pins = "gpb5-0", "gpb5-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c9_bus: i2c9-bus { + samsung,pins = "gpb5-2", "gpb5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c10_bus: i2c10-bus { + samsung,pins = "gpb5-4", "gpb5-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + i2c11_bus: i2c11-bus { + samsung,pins = "gpb5-6", "gpb5-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; + + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_NONE>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <PIN_PULL_UP>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_2 { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts new file mode 100644 index 000000000000..8c84ab27c19b --- /dev/null +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -0,0 +1,103 @@ +/* + * SAMSUNG XYREF5260 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5260.dtsi" + +/ { + model = "SAMSUNG XYREF5260 board based on EXYNOS5260"; + compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + xrtcxti: xrtcxti { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xrtcxti"; + #clock-cells = <0>; + }; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + bypass-smu; + supports-highspeed; + supports-hs200-mode; /* 200 Mhz */ + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi new file mode 100644 index 000000000000..5398a60207ca --- /dev/null +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -0,0 +1,304 @@ +/* + * SAMSUNG EXYNOS5260 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/exynos5260-clk.h> + +/ { + compatible = "samsung,exynos5260", "samsung,exynos5"; + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + cci-control-port = <&cci_control1>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + cci-control-port = <&cci_control1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cci-control-port = <&cci_control0>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cci-control-port = <&cci_control0>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cci-control-port = <&cci_control0>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cci-control-port = <&cci_control0>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_top: clock-controller@10010000 { + compatible = "samsung,exynos5260-clock-top"; + reg = <0x10010000 0x10000>; + #clock-cells = <1>; + }; + + clock_peri: clock-controller@10200000 { + compatible = "samsung,exynos5260-clock-peri"; + reg = <0x10200000 0x10000>; + #clock-cells = <1>; + }; + + clock_egl: clock-controller@10600000 { + compatible = "samsung,exynos5260-clock-egl"; + reg = <0x10600000 0x10000>; + #clock-cells = <1>; + }; + + clock_kfc: clock-controller@10700000 { + compatible = "samsung,exynos5260-clock-kfc"; + reg = <0x10700000 0x10000>; + #clock-cells = <1>; + }; + + clock_g2d: clock-controller@10A00000 { + compatible = "samsung,exynos5260-clock-g2d"; + reg = <0x10A00000 0x10000>; + #clock-cells = <1>; + }; + + clock_mif: clock-controller@10CE0000 { + compatible = "samsung,exynos5260-clock-mif"; + reg = <0x10CE0000 0x10000>; + #clock-cells = <1>; + }; + + clock_mfc: clock-controller@11090000 { + compatible = "samsung,exynos5260-clock-mfc"; + reg = <0x11090000 0x10000>; + #clock-cells = <1>; + }; + + clock_g3d: clock-controller@11830000 { + compatible = "samsung,exynos5260-clock-g3d"; + reg = <0x11830000 0x10000>; + #clock-cells = <1>; + }; + + clock_fsys: clock-controller@122E0000 { + compatible = "samsung,exynos5260-clock-fsys"; + reg = <0x122E0000 0x10000>; + #clock-cells = <1>; + }; + + clock_aud: clock-controller@128C0000 { + compatible = "samsung,exynos5260-clock-aud"; + reg = <0x128C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_isp: clock-controller@133C0000 { + compatible = "samsung,exynos5260-clock-isp"; + reg = <0x133C0000 0x10000>; + #clock-cells = <1>; + }; + + clock_gscl: clock-controller@13F00000 { + compatible = "samsung,exynos5260-clock-gscl"; + reg = <0x13F00000 0x10000>; + #clock-cells = <1>; + }; + + clock_disp: clock-controller@14550000 { + compatible = "samsung,exynos5260-clock-disp"; + reg = <0x14550000 0x10000>; + #clock-cells = <1>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid: chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@100B0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x100B0000 0x1000>; + clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; + clock-names = "fin_pll", "mct"; + interrupts = <0 104 0>, <0 105 0>, <0 106 0>, + <0 107 0>, <0 122 0>, <0 123 0>, + <0 124 0>, <0 125 0>, <0 126 0>, + <0 127 0>, <0 128 0>, <0 129 0>; + }; + + cci: cci@10F00000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10F00000 0x1000>; + ranges = <0x0 0x10F00000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + pinctrl_0: pinctrl@11600000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x11600000 0x1000>; + interrupts = <0 79 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@12290000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x12290000 0x1000>; + interrupts = <0 157 0>; + }; + + pinctrl_2: pinctrl@128B0000 { + compatible = "samsung,exynos5260-pinctrl"; + reg = <0x128B0000 0x1000>; + interrupts = <0 243 0>; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 146 0>; + clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 147 0>; + clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 148 0>; + clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart3: serial@12860000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12860000 0x100>; + interrupts = <0 145 0>; + clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + mmc_0: mmc@12140000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12140000 0x2000>; + interrupts = <0 156 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_1: mmc@12150000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12150000 0x2000>; + interrupts = <0 158 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + + mmc_2: mmc@12160000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12160000 0x2000>; + interrupts = <0 159 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <64>; + status = "disabled"; + }; + }; +}; + +#include "exynos5260-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts new file mode 100644 index 000000000000..7275bbd6fc4b --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -0,0 +1,82 @@ +/* + * SAMSUNG SMDK5410 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "Samsung SMDK5410 board based on EXYNOS5410"; + compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02037000 { + compatible = "samsung,secure-firmware"; + reg = <0x02037000 0x1000>; + }; + +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi new file mode 100644 index 000000000000..3839c26f467f --- /dev/null +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -0,0 +1,206 @@ +/* + * SAMSUNG EXYNOS5410 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file. + * EXYNOS5410 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/exynos5410.h> + +/ { + compatible = "samsung,exynos5410", "samsung,exynos5"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + }; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + mct: mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0xB00>; + interrupt-parent = <&interrupt_map>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + interrupt_map: interrupt-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; + + uart0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + uart2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 80a3bf4c5986..434fd9d3e09d 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -26,6 +26,11 @@ bootargs = "console=ttySAC3,115200"; }; + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + fixed-rate-clocks { oscclk { compatible = "samsung,exynos5420-oscclk"; @@ -37,6 +42,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -364,16 +374,4 @@ gpio-key,wakeup; }; }; - - amba { - mdma1: mdma@11C10000 { - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts new file mode 100644 index 000000000000..1c5b8f9f4a36 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -0,0 +1,287 @@ +/* + * Google Peach Pit Rev 6+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5420.dtsi" + +/ { + model = "Google Peach Pit Rev 6+"; + + compatible = "google,pit-rev16", + "google,pit-rev15", "google,pit-rev14", + "google,pit-rev13", "google,pit-rev12", + "google,pit-rev11", "google,pit-rev10", + "google,pit-rev9", "google,pit-rev8", + "google,pit-rev7", "google,pit-rev6", + "google,pit", "google,peach","samsung,exynos5420", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; +}; + +&pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&hsi2c_7 { + status = "okay"; + + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; + +&i2s0 { + status = "okay"; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index e62c8eb57438..ba686e40eac7 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -624,6 +624,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_hs_bus: i2c7-hs-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 69104850eb5e..6052aa9c5659 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -68,6 +68,11 @@ status = "okay"; }; + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; + mmc@12200000 { status = "okay"; broken-cd; @@ -140,6 +145,22 @@ }; }; + pinctrl@14000000 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gpg0-5"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gpg1-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + hdmi@14530000 { status = "okay"; hpd-gpio = <&gpx3 7 0>; @@ -147,6 +168,36 @@ pinctrl-0 = <&hdmi_hpd_irq>; }; + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg0 5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "VBUS1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpg1 4 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; + + phy@12100000 { + vbus-supply = <&usb300_vbus_reg>; + }; + + phy@12500000 { + vbus-supply = <&usb301_vbus_reg>; + }; + i2c_2: i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c3a9a66c5767..e38532271ef9 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -47,6 +47,8 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + usbdrdphy0 = &usbdrd_phy0; + usbdrdphy1 = &usbdrd_phy1; }; cpus { @@ -58,6 +60,7 @@ compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu1: cpu@1 { @@ -65,6 +68,7 @@ compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu2: cpu@2 { @@ -72,6 +76,7 @@ compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu3: cpu@3 { @@ -79,6 +84,7 @@ compatible = "arm,cortex-a15"; reg = <0x3>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu4: cpu@100 { @@ -86,6 +92,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu5: cpu@101 { @@ -93,6 +100,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu6: cpu@102 { @@ -100,6 +108,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu7: cpu@103 { @@ -107,6 +116,44 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + }; + }; + + cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; }; }; @@ -125,12 +172,13 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; + samsung,power-domain = <&mfc_pd>; }; mmc_0: mmc@12200000 { @@ -169,7 +217,7 @@ status = "disabled"; }; - mct@101C0000 { + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; @@ -219,16 +267,6 @@ reg = <0x100440C0 0x20>; }; - mau_pd: power-domain@100440E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440E0 0x20>; - }; - - g2d_pd: power-domain@10044100 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044100 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -270,7 +308,7 @@ interrupts = <0 47 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -336,6 +374,13 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in the kernel + * for boards that run in secure mode, we are getting + * imprecise external aborts causing the kernel to oops. + */ + status = "disabled"; }; }; @@ -385,7 +430,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <0 68 0>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -401,7 +446,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <0 69 0>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -417,7 +462,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 70 0>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -430,22 +475,22 @@ status = "disabled"; }; - serial@12C00000 { + uart_0: serial@12C00000 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C10000 { + uart_1: serial@12C10000 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C20000 { + uart_2: serial@12C20000 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C30000 { + uart_3: serial@12C30000 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -465,14 +510,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -549,7 +594,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -562,7 +607,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -575,7 +620,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -588,7 +633,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -601,7 +646,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -614,7 +659,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -627,13 +672,13 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; - hdmi@14530000 { - compatible = "samsung,exynos4212-hdmi"; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, @@ -641,10 +686,16 @@ <&clock CLK_MOUT_HDMI>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; + phy = <&hdmiphy>; + samsung,syscon-phandle = <&pmu_system_controller>; status = "disabled"; }; - mixer@14450000 { + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; @@ -675,6 +726,11 @@ reg = <0x10040000 0x5000>; }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; @@ -715,7 +771,7 @@ clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; - watchdog@101D0000 { + watchdog: watchdog@101D0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; @@ -724,12 +780,103 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - sss@10830000 { + sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; - clocks = <&clock 471>; + clocks = <&clock CLK_SSS>; clock-names = "secss"; - samsung,power-domain = <&g2d_pd>; + }; + + usbdrd3_0: usb@12000000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy0: phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbdrd3_1: usb@12400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dwc3 { + compatible = "snps,dwc3"; + reg = <0x12400000 0x10000>; + interrupts = <0 73 0>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy1: phy@12500000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12500000 0x100>; + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; + + usbhost2: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usbhost1: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usb2_phy: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 84f77c2fe4d4..ae3a17c791f6 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -176,7 +176,7 @@ clock-names = "i2c"; }; - watchdog { + watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; interrupts = <0 1 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts new file mode 100644 index 000000000000..f3af2079a063 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -0,0 +1,253 @@ +/* + * Google Peach Pi Rev 10+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5800.dtsi" + +/ { + model = "Google Peach Pi Rev 10+"; + + compatible = "google,pi-rev16", + "google,pi-rev15", "google,pi-rev14", + "google,pi-rev13", "google,pi-rev12", + "google,pi-rev11", "google,pi-rev10", + "google,pi", "google,peach", "samsung,exynos5800", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + usb300_vbus_reg: regulator-usb300 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb300_vbus_en>; + enable-active-high; + }; + + usb301_vbus_reg: regulator-usb301 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gph0 1 0>; + pinctrl-names = "default"; + pinctrl-0 = <&usb301_vbus_en>; + enable-active-high; + }; +}; + +&pinctrl_0 { + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_3 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; + + display-timings { + native-mode = <&timing1>; + + timing1: timing@1 { + clock-frequency = <150660000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <60>; + hback-porch = <172>; + hsync-len = <80>; + vback-porch = <25>; + vfront-porch = <10>; + vsync-len = <10>; + }; + }; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi new file mode 100644 index 000000000000..c0bb3563cac1 --- /dev/null +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -0,0 +1,28 @@ +/* + * SAMSUNG EXYNOS5800 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file. + * EXYNOS5800 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5420.dtsi" + +/ { + compatible = "samsung,exynos5800", "samsung,exynos5"; +}; + +&clock { + compatible = "samsung,exynos5800-clock"; +}; + +&mfc { + compatible = "samsung,mfc-v8"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index 62fb3da50bdb..ad12da38fc92 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -172,3 +172,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts index f8db366c46ff..9b31faa96377 100644 --- a/arch/arm/boot/dts/imx25-karo-tx25.dts +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -16,21 +16,98 @@ model = "Ka-Ro TX25"; compatible = "karo,imx25-tx25", "fsl,imx25"; + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_phy: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-phy"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 9 0>; + enable-active-high; + }; + }; + memory { reg = <0x80000000 0x02000000 0x90000000 0x02000000>; }; }; +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0x80000000 + MX25_PAD_UART1_CTS__UART1_CTS 0x80000000 + MX25_PAD_UART1_RTS__UART1_RTS 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */ + MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */ + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX25_PAD_NF_CE0__NF_CE0 0x80000000 + MX25_PAD_NFWE_B__NFWE_B 0x80000000 + MX25_PAD_NFRE_B__NFRE_B 0x80000000 + MX25_PAD_NFALE__NFALE 0x80000000 + MX25_PAD_NFCLE__NFCLE 0x80000000 + MX25_PAD_NFWP_B__NFWP_B 0x80000000 + MX25_PAD_NFRB__NFRB 0x80000000 + MX25_PAD_D7__D7 0x80000000 + MX25_PAD_D6__D6 0x80000000 + MX25_PAD_D5__D5 0x80000000 + MX25_PAD_D4__D4 0x80000000 + MX25_PAD_D3__D3 0x80000000 + MX25_PAD_D2__D2 0x80000000 + MX25_PAD_D1__D1 0x80000000 + MX25_PAD_D0__D0 0x80000000 + >; + }; +}; + &uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-reset-gpios = <&gpio3 7 0>; phy-mode = "rmii"; + phy-supply = <®_fec_phy>; status = "okay"; }; &nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; nand-on-flash-bbt; + nand-ecc-mode = "hw"; + nand-bus-width = <8>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index f607ce520eda..c608942b8a3b 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/input/input.h> #include "imx25.dtsi" / { @@ -19,18 +20,232 @@ memory { reg = <0x80000000 0x4000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_fec_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 3 0>; + enable-active-high; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_can_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "can-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 6 0>; + }; + }; + + sound { + compatible = "fsl,imx25-pdk-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx25-pdk-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; }; -&uart1 { +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_3v3>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio2 1 0>; + wp-gpios = <&gpio2 0 0>; status = "okay"; }; &fec { phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 8 0>; status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 129>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + imx25-pdk { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX25_PAD_RW__AUD4_TXFS 0xe0 + MX25_PAD_OE__AUD4_TXC 0xe0 + MX25_PAD_EB0__AUD4_TXD 0xe0 + MX25_PAD_EB1__AUD4_RXD 0xe0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX25_PAD_GPIO_A__CAN1_TX 0x0 + MX25_PAD_GPIO_B__CAN1_RX 0x0 + MX25_PAD_D14__GPIO_4_6 0x80000000 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX25_PAD_SD1_CMD__SD1_CMD 0x80000000 + MX25_PAD_SD1_CLK__SD1_CLK 0x80000000 + MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000 + MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000 + MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000 + MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000 + MX25_PAD_A14__GPIO_2_0 0x80000000 + MX25_PAD_A15__GPIO_2_1 0x80000000 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX25_PAD_FEC_MDC__FEC_MDC 0x80000000 + MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0 + MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000 + MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000 + MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 + MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000 + MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000 + MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000 + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0 + MX25_PAD_A17__GPIO_2_3 0x80000000 + MX25_PAD_D12__GPIO_4_8 0x80000000 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000 + MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000 + MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000 + MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000 + MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000 + MX25_PAD_KPP_COL0__KPP_COL0 0x80000000 + MX25_PAD_KPP_COL1__KPP_COL1 0x80000000 + MX25_PAD_KPP_COL2__KPP_COL2 0x80000000 + MX25_PAD_KPP_COL3__KPP_COL3 0x80000000 + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX25_PAD_UART1_RTS__UART1_RTS 0xe0 + MX25_PAD_UART1_CTS__UART1_CTS 0xe0 + MX25_PAD_UART1_TXD__UART1_TXD 0x80000000 + MX25_PAD_UART1_RXD__UART1_RXD 0xc0 + >; + }; + }; +}; + &nfc { nand-on-flash-bbt; status = "okay"; }; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0x0, 0x0, KEY_UP) + MATRIX_KEY(0x0, 0x1, KEY_DOWN) + MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN) + MATRIX_KEY(0x0, 0x3, KEY_HOME) + MATRIX_KEY(0x1, 0x0, KEY_RIGHT) + MATRIX_KEY(0x1, 0x1, KEY_LEFT) + MATRIX_KEY(0x1, 0x2, KEY_ENTER) + MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP) + MATRIX_KEY(0x2, 0x0, KEY_F6) + MATRIX_KEY(0x2, 0x1, KEY_F8) + MATRIX_KEY(0x2, 0x2, KEY_F9) + MATRIX_KEY(0x2, 0x3, KEY_F10) + MATRIX_KEY(0x3, 0x0, KEY_F1) + MATRIX_KEY(0x3, 0x1, KEY_F2) + MATRIX_KEY(0x3, 0x2, KEY_F3) + MATRIX_KEY(0x3, 0x2, KEY_POWER) + >; + status = "okay"; +}; + +&ssi1 { + codec-handle = <&codec>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index ea323f09dc78..bb74d9582b7e 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -21,6 +22,8 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &esdhc1; + mmc1 = &esdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -165,9 +168,10 @@ status = "disabled"; }; - kpp@43fa8000 { + kpp: kpp@43fa8000 { #address-cells = <1>; #size-cells = <0>; + compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; clock-names = ""; @@ -482,23 +486,13 @@ clocks = <&clks 99>; }; - usbphy1: usbphy@1 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - - usbphy2: usbphy@2 { - compatible = "nop-usbphy"; - status = "disabled"; - }; - usbotg: usb@53ff4000 { compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -506,9 +500,9 @@ compatible = "fsl,imx25-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 70>, <&clks 8>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 70>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -518,7 +512,6 @@ clocks = <&clks 9>, <&clks 70>, <&clks 8>; clock-names = "ipg", "ahb", "per"; reg = <0x53ff4600 0x00f>; - status = "disabled"; }; dryice@53ffc000 { @@ -530,6 +523,11 @@ }; }; + iram: sram@78000000 { + compatible = "mmio-sram"; + reg = <0x78000000 0x20000>; + }; + emi@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; @@ -550,4 +548,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 5ce89aa275df..4c317716b510 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -17,15 +17,181 @@ compatible = "fsl,imx27-pdk", "fsl,imx27"; memory { - reg = <0x0 0x0>; + reg = <0xa0000000 0x08000000>; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; +}; + +&cspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cspi2>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13783@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + + regulators { + vgen_reg: vgen { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc1_reg: vmmc1 { + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + }; + + gpo1_reg: gpo1 { + regulator-always-on; + regulator-boot-on; + }; + + gpo3_reg: gpo3 { + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&fec { + phy-mode = "mii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + >; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; }; &uart1 { fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; -&fec { +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + fsl,usbphy = <&usbphy0>; + phy_type = "ulpi"; status = "okay"; }; + +&iomuxc { + imx27-pdk { + pinctrl_cspi2: cspi2grp { + fsl,pins = < + MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 + MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 + MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0 + MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */ + MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 3c3964a99637..7c869fe3c30b 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -15,6 +15,10 @@ model = "Phytec pca100 rapid development kit"; compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27"; + chosen { + stdout-path = &uart1; + }; + display: display { model = "Primeview-PD050VL1"; native-mode = <&timing0>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index df3b2e731835..fe02bc7a24fd 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -12,14 +12,79 @@ / { model = "Phytec pcm970"; compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27"; + + chosen { + stdout-path = &uart1; + }; + + display0: LQ035Q7 { + model = "Sharp-LQ035Q7"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xf00080c0>; + + display-timings { + timing0: 240x320 { + clock-frequency = <5500000>; + hactive = <240>; + vactive = <320>; + hback-porch = <5>; + hsync-len = <7>; + hfront-porch = <16>; + vback-porch = <7>; + vsync-len = <1>; + vfront-porch = <9>; + pixelclk-active = <1>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <0>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csien>; + reg = <2>; + regulator-name = "CSI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; + }; + + usbphy { + usbphy2: usbphy@2 { + compatible = "usb-nop-xceiv"; + reg = <2>; + vcc-supply = <®_5v0>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &cspi1 { + pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>, <&gpio4 27 GPIO_ACTIVE_LOW>; }; +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb1>; + display = <&display0>; + lcd-supply = <®_5v0>; + fsl,dmacr = <0x00020010>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -36,6 +101,50 @@ &iomuxc { imx27_phycore_rdk { + pinctrl_csien: csiengrp { + fsl,pins = < + MX27_PAD_USB_OC_B__GPIO2_24 0x0 + >; + }; + + pinctrl_cspi1cs1: cspi1cs1grp { + fsl,pins = < + MX27_PAD_CSPI1_SS1__GPIO4_27 0x0 + >; + }; + + pinctrl_imxfb1: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CLS__CLS 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_LSCLK__LSCLK 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_PS__PS 0x0 + MX27_PAD_REV__REV 0x0 + MX27_PAD_SPL_SPR__SPL_SPR 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + pinctrl_i2c1: i2c1grp { /* Add pullup to DATA line */ fsl,pins = < @@ -193,19 +302,16 @@ dr_mode = "host"; phy_type = "ulpi"; vbus-supply = <®_5v0>; + fsl,usbphy = <&usbphy2>; disable-over-current; status = "okay"; }; -&usbphy2 { - vcc-supply = <®_5v0>; -}; - &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim>; - can@d4000000 { + can@4,0 { compatible = "nxp,sja1000"; reg = <4 0x00000000 0x00000100>; interrupt-parent = <&gpio5>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index cefaa6994623..31e9f7049f73 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -41,6 +41,20 @@ regulator-max-microvolt = <5000000>; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usbphy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + vcc-supply = <&sw3_reg>; + clocks = <&clks 0>; + clock-names = "main_clk"; + }; + }; }; &audmux { @@ -66,9 +80,9 @@ status = "okay"; pmic: mc13783@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13783"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; reg = <0>; spi-cs-high; spi-max-frequency = <20000000>; @@ -166,7 +180,7 @@ &fec { phy-mode = "mii"; - phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; + phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; phy-supply = <®_3v3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */ - MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ >; }; @@ -251,6 +264,21 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */ + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI1_FS__SSI1_FS 0x0 + MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0 + MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0 + MX27_PAD_SSI1_CLK__SSI1_CLK 0x0 + >; + }; + pinctrl_usbotg: usbotggrp { fsl,pins = < MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 @@ -279,23 +307,28 @@ status = "okay"; }; +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + fsl,mode = "i2s-slave"; + status = "okay"; +}; + &usbotg { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; dr_mode = "otg"; phy_type = "ulpi"; + fsl,usbphy = <&usbphy0>; vbus-supply = <&sw3_reg>; + disable-over-current; status = "okay"; }; -&usbphy0 { - vcc-supply = <&sw3_reg>; -}; - &weim { status = "okay"; - nor: nor@c0000000 { + nor: nor@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; @@ -305,7 +338,7 @@ #size-cells = <1>; }; - sram: sram@c8000000 { + sram: sram@1,0 { compatible = "mtd-ram"; reg = <1 0x00000000 0x00800000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 137e010eab35..a75555c39533 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,11 +11,13 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -71,26 +73,6 @@ }; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - clocks = <&clks 75>; - clock-names = "main_clk"; - }; - }; - soc { #address-cells = <1>; #size-cells = <1>; @@ -464,9 +446,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 0>; - fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -474,7 +455,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -483,9 +464,8 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 15>; + clocks = <&clks 75>; fsl,usbmisc = <&usbmisc 2>; - fsl,usbphy = <&usbphy2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts index 5f326c1c1850..ce1a7effba37 100644 --- a/arch/arm/boot/dts/imx28-duckbill.dts +++ b/arch/arm/boot/dts/imx28-duckbill.dts @@ -25,9 +25,9 @@ ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; - bus-width = <8>; + bus-width = <4>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -39,7 +39,7 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < - MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */ + MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */ >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; @@ -82,7 +82,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-supply = <®_3p3v>; - phy-reset-gpios = <&gpio4 13 0>; + phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; status = "okay"; }; @@ -110,12 +110,12 @@ status { label = "duckbill:green:status"; - gpios = <&gpio3 5 0>; + gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; }; failure { label = "duckbill:red:status"; - gpios = <&gpio3 4 0>; + gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 90a579532b8b..a95cc5358ff4 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -9,6 +9,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/gpio/gpio.h> #include "skeleton.dtsi" #include "imx28-pinfunc.h" diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi index 906ae937b013..9c2b715ab8bf 100644 --- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi +++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi @@ -37,6 +37,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@48 { + compatible = "ti,tsc2007"; + gpios = <&gpio3 2 0>; + interrupt-parent = <&gpio3>; + interrupts = <0x2 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x48>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { @@ -70,6 +81,10 @@ MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000 >; }; + + pinctrl_tsc2007_1: tsc2007grp-1 { + fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>; + }; }; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 1bdec21f4533..f04ae91eea89 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -46,6 +46,14 @@ linux,default-trigger = "heartbeat"; }; }; + + sound { + compatible = "eukrea,asoc-tlv320"; + eukrea,model = "imx35-eukrea-tlv320aic23"; + ssi-controller = <&ssi1>; + fsl,mux-int-port = <1>; + fsl,mux-ext-port = <4>; + }; }; &audmux { @@ -124,6 +132,7 @@ }; &ssi1 { + codec-handle = <&tlv320aic23>; fsl,mode = "i2s-slave"; status = "okay"; }; @@ -141,3 +150,16 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbhost1 { + phy_type = "serial"; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts new file mode 100644 index 000000000000..8d715523708f --- /dev/null +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * Copyright 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx35.dtsi" + +/ { + model = "Freescale i.MX35 Product Development Kit"; + compatible = "fsl,imx35-pdk", "fsl,imx35"; + + memory { + reg = <0x80000000 0x8000000>, + <0x90000000 0x8000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + status = "okay"; +}; + +&iomuxc { + imx35-pdk { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000 + MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000 + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000 + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000 + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000 + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5 + MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5 + MX35_PAD_CTS1__UART1_CTS 0x1c5 + MX35_PAD_RTS1__UART1_RTS 0x1c5 + >; + }; + }; +}; + +&nfc { + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 88b218f8f810..4759abb49436 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -13,6 +13,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -295,9 +296,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4000 0x0200>; interrupts = <37>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 0>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -305,9 +306,9 @@ compatible = "fsl,imx35-usb", "fsl,imx27-usb"; reg = <0x53ff4400 0x0200>; interrupts = <35>; - clocks = <&clks 9>, <&clks 73>, <&clks 28>; - clock-names = "ipg", "ahb", "per"; + clocks = <&clks 73>; fsl,usbmisc = <&usbmisc 1>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -356,4 +357,20 @@ }; }; }; + + usbphy { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usbphy0: usb-phy@0 { + reg = <0>; + compatible = "usb-nop-xceiv"; + }; + + usbphy1: usb-phy@1 { + reg = <1>; + compatible = "usb-nop-xceiv"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 9c89d1ca97c2..6a201cf54366 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -17,6 +17,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 9e9deb244b76..6bc3243a80d3 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -17,10 +17,28 @@ model = "Freescale i.MX51 Babbage Board"; compatible = "fsl,imx51-babbage", "fsl,imx51"; + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x90000000 0x20000000>; }; + clocks { + ckih1 { + clock-frequency = <22579200>; + }; + + clk_26M: codec_clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <26000000>; + gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + }; + }; + display0: display@di0 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; @@ -82,11 +100,13 @@ gpio-keys { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; power { label = "Power Button"; gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; @@ -102,6 +122,36 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usbh1_vbus: regulator@0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + reg = <0>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgreg>; + reg = <1>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + sound { compatible = "fsl,imx51-babbage-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -116,41 +166,23 @@ mux-ext-port = <3>; }; - clocks { - ckih1 { - clock-frequency = <22579200>; - }; + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; - clk_26M: codec_clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <26000000>; - gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_DUMMY>; + clock-names = "main_clk"; }; }; }; -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - fsl,cd-controller; - fsl,wp-controller; - status = "okay"; -}; - -&esdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart3 { +&audmux { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; @@ -163,9 +195,9 @@ status = "okay"; pmic: mc13892@0 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; spi-max-frequency = <6000000>; spi-cs-high; reg = <0>; @@ -280,6 +312,53 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + fsl,cd-controller; + fsl,wp-controller; + status = "okay"; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_clkcodec>; + reg = <0x0a>; + clocks = <&clk_26M>; + VDDA-supply = <&vdig_reg>; + VDDIO-supply = <&vvideo_reg>; + }; +}; + &ipu_di0_disp0 { remote-endpoint = <&display0_in>; }; @@ -288,29 +367,74 @@ remote-endpoint = <&display1_in>; }; +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 3, KEY_HOME) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_ENTER) + MATRIX_KEY(1, 3, KEY_VOLUMEUP) + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(2, 1, KEY_F8) + MATRIX_KEY(2, 2, KEY_F9) + MATRIX_KEY(2, 3, KEY_F10) + MATRIX_KEY(3, 0, KEY_F1) + MATRIX_KEY(3, 1, KEY_F2) + MATRIX_KEY(3, 2, KEY_F3) + MATRIX_KEY(3, 3, KEY_POWER) + >; + status = "okay"; +}; + &ssi2 { fsl,mode = "i2s-slave"; status = "okay"; }; -&iomuxc { +&uart1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; - imx51-babbage { - pinctrl_hog: hoggrp { - fsl,pins = < - MX51_PAD_GPIO1_0__SD1_CD 0x20d5 - MX51_PAD_GPIO1_1__SD1_WP 0x20d5 - MX51_PAD_GPIO1_5__GPIO1_5 0x100 - MX51_PAD_GPIO1_6__GPIO1_6 0x100 - MX51_PAD_EIM_A27__GPIO2_21 0x5 - MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 - MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 - MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 - >; - }; +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usbh1_vbus>; + fsl,usbphy = <&usbh1phy>; + phy_type = "ulpi"; + status = "okay"; +}; +&usbotg { + dr_mode = "otg"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&iomuxc { + imx51-babbage { pinctrl_audmux: audmuxgrp { fsl,pins = < MX51_PAD_AUD3_BB_TXD__AUD3_TXD 0x80000000 @@ -320,11 +444,19 @@ >; }; + pinctrl_clkcodec: clkcodecgrp { + fsl,pins = < + MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000 + >; + }; + pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 /* CS1 */ >; }; @@ -336,6 +468,8 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_GPIO1_0__SD1_CD 0x20d5 + MX51_PAD_GPIO1_1__SD1_WP 0x20d5 >; }; @@ -347,29 +481,38 @@ MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + MX51_PAD_GPIO1_5__GPIO1_5 0x100 /* WP */ + MX51_PAD_GPIO1_6__GPIO1_6 0x100 /* CD */ >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX51_PAD_EIM_EB2__FEC_MDIO 0x80000000 - MX51_PAD_EIM_EB3__FEC_RDATA1 0x80000000 - MX51_PAD_EIM_CS2__FEC_RDATA2 0x80000000 - MX51_PAD_EIM_CS3__FEC_RDATA3 0x80000000 - MX51_PAD_EIM_CS4__FEC_RX_ER 0x80000000 - MX51_PAD_EIM_CS5__FEC_CRS 0x80000000 - MX51_PAD_NANDF_RB2__FEC_COL 0x80000000 - MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x80000000 - MX51_PAD_NANDF_D9__FEC_RDATA0 0x80000000 - MX51_PAD_NANDF_D8__FEC_TDATA0 0x80000000 - MX51_PAD_NANDF_CS2__FEC_TX_ER 0x80000000 - MX51_PAD_NANDF_CS3__FEC_MDC 0x80000000 - MX51_PAD_NANDF_CS4__FEC_TDATA1 0x80000000 - MX51_PAD_NANDF_CS5__FEC_TDATA2 0x80000000 - MX51_PAD_NANDF_CS6__FEC_TDATA3 0x80000000 - MX51_PAD_NANDF_CS7__FEC_TX_EN 0x80000000 - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x80000000 - MX51_PAD_EIM_A20__GPIO2_14 0x85 /* Reset */ + MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5 + MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085 + MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085 + MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085 + MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180 + MX51_PAD_EIM_CS5__FEC_CRS 0x00000180 + MX51_PAD_NANDF_RB2__FEC_COL 0x00000180 + MX51_PAD_NANDF_RB3__FEC_RX_CLK 0x00000180 + MX51_PAD_NANDF_D9__FEC_RDATA0 0x00002180 + MX51_PAD_NANDF_D8__FEC_TDATA0 0x00002004 + MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004 + MX51_PAD_NANDF_CS3__FEC_MDC 0x00002004 + MX51_PAD_NANDF_CS4__FEC_TDATA1 0x00002004 + MX51_PAD_NANDF_CS5__FEC_TDATA2 0x00002004 + MX51_PAD_NANDF_CS6__FEC_TDATA3 0x00002004 + MX51_PAD_NANDF_CS7__FEC_TX_EN 0x00002004 + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK 0x00002180 + MX51_PAD_NANDF_D11__FEC_RX_DV 0x000020a4 + MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX51_PAD_EIM_A27__GPIO2_21 0x5 >; }; @@ -379,6 +522,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX51_PAD_EIM_D19__I2C1_SCL 0x400001ed + MX51_PAD_EIM_D16__I2C1_SDA 0x400001ed + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed @@ -455,6 +605,12 @@ >; }; + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 /* IRQ */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 @@ -479,71 +635,33 @@ MX51_PAD_EIM_D24__UART3_CTS 0x1c5 >; }; - }; -}; -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x80000000 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x80000000 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x80000000 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x80000000 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x80000000 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x80000000 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x80000000 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x80000000 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x80000000 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x80000000 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x80000000 + >; + }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; + pinctrl_usbh1reg: usbh1reggrp { + fsl,pins = < + MX51_PAD_EIM_D21__GPIO2_5 0x85 + >; + }; - sgtl5000: codec@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clk_26M>; - VDDA-supply = <&vdig_reg>; - VDDIO-supply = <&vvideo_reg>; + pinctrl_usbotgreg: usbotgreggrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0x85 + >; + }; }; }; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "mii"; - phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - status = "okay"; -}; - -&kpp { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_kpp>; - linux,keymap = < - MATRIX_KEY(0, 0, KEY_UP) - MATRIX_KEY(0, 1, KEY_DOWN) - MATRIX_KEY(0, 2, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 3, KEY_HOME) - MATRIX_KEY(1, 0, KEY_RIGHT) - MATRIX_KEY(1, 1, KEY_LEFT) - MATRIX_KEY(1, 2, KEY_ENTER) - MATRIX_KEY(1, 3, KEY_VOLUMEUP) - MATRIX_KEY(2, 0, KEY_F6) - MATRIX_KEY(2, 1, KEY_F8) - MATRIX_KEY(2, 2, KEY_F9) - MATRIX_KEY(2, 3, KEY_F10) - MATRIX_KEY(3, 0, KEY_F1) - MATRIX_KEY(3, 1, KEY_F2) - MATRIX_KEY(3, 2, KEY_F3) - MATRIX_KEY(3, 3, KEY_POWER) - >; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts new file mode 100644 index 000000000000..1db517d3d497 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts @@ -0,0 +1,108 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx51-digi-connectcore-som.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51 JSK"; + compatible = "digi,connectcore-ccxmx51-jsk", + "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + chosen { + linux,stdout-path = &uart1; + }; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + imx51-digi-connectcore-jsk { + pinctrl_owire: owiregrp { + fsl,pins = < + MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi new file mode 100644 index 000000000000..321662f53e33 --- /dev/null +++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi @@ -0,0 +1,377 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx51.dtsi" + +/ { + model = "Digi ConnectCore CC(W)-MX51"; + compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51"; + + memory { + reg = <0x90000000 0x08000000>; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pmic: mc13892@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mc13892>; + compatible = "fsl,mc13892"; + spi-max-frequency = <16000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { }; + + viohi_reg: viohi { + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + gpo1_reg: gpo1 { }; + + gpo2_reg: gpo2 { }; + + gpo3_reg: gpo3 { }; + + gpo4_reg: gpo4 { }; + + pwgt2spi_reg: pwgt2spi { + regulator-always-on; + }; + + vcoincell_reg: vcoincell { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&esdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2>; + cap-sdio-irq; + enable-sdio-wakeup; + keep-power-in-suspend; + max-frequency = <50000000>; + no-1-8-v; + non-removable; + vmmc-supply = <&gpo4_reg>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + phy-supply = <&gpo3_reg>; + /* Pins shared with LCD2, keep status disabled */ +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + mma7455l@1d { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma7455l>; + compatible = "fsl,mma7455l"; + reg = <0x1d>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&usbotg { + phy_type = "utmi_wide"; + disable-over-current; + /* Device role is not known, keep status disabled */ +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim>; + status = "okay"; + + lan9221: lan9221@5,0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lan9221>; + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <5 0x00000000 0x1000>; + fsl,weim-cs-timing = < + 0x00420081 0x00000000 + 0x32260000 0x00000000 + 0x72080f00 0x00000000 + >; + clocks = <&clks IMX5_CLK_DUMMY>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + vdd33a-supply = <&gpo2_reg>; + vddvario-supply = <&gpo2_reg>; + }; +}; + +&iomuxc { + imx51-digi-connectcore-som { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */ + >; + }; + + pinctrl_esdhc2: esdhc2grp { + fsl,pins = < + MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5 + MX51_PAD_SD2_CLK__SD2_CLK 0x20d5 + MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5 + MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5 + MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5 + MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000 + MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000 + MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000 + MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000 + MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000 + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed + MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX51_PAD_NANDF_D0__NANDF_D0 0x80000000 + MX51_PAD_NANDF_D1__NANDF_D1 0x80000000 + MX51_PAD_NANDF_D2__NANDF_D2 0x80000000 + MX51_PAD_NANDF_D3__NANDF_D3 0x80000000 + MX51_PAD_NANDF_D4__NANDF_D4 0x80000000 + MX51_PAD_NANDF_D5__NANDF_D5 0x80000000 + MX51_PAD_NANDF_D6__NANDF_D6 0x80000000 + MX51_PAD_NANDF_D7__NANDF_D7 0x80000000 + MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000 + MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000 + MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000 + MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000 + MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000 + MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000 + MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000 + >; + }; + + pinctrl_lan9221: lan9221grp { + fsl,pins = < + MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */ + >; + }; + + pinctrl_mc13892: mc13892grp { + fsl,pins = < + MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */ + >; + }; + + pinctrl_mma7455l: mma7455lgrp { + fsl,pins = < + MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */ + MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */ + >; + }; + + pinctrl_weim: weimgrp { + fsl,pins = < + MX51_PAD_EIM_DA0__EIM_DA0 0x80000000 + MX51_PAD_EIM_DA1__EIM_DA1 0x80000000 + MX51_PAD_EIM_DA2__EIM_DA2 0x80000000 + MX51_PAD_EIM_DA3__EIM_DA3 0x80000000 + MX51_PAD_EIM_DA4__EIM_DA4 0x80000000 + MX51_PAD_EIM_DA5__EIM_DA5 0x80000000 + MX51_PAD_EIM_DA6__EIM_DA6 0x80000000 + MX51_PAD_EIM_DA7__EIM_DA7 0x80000000 + MX51_PAD_EIM_DA8__EIM_DA8 0x80000000 + MX51_PAD_EIM_DA9__EIM_DA9 0x80000000 + MX51_PAD_EIM_DA10__EIM_DA10 0x80000000 + MX51_PAD_EIM_DA11__EIM_DA11 0x80000000 + MX51_PAD_EIM_DA12__EIM_DA12 0x80000000 + MX51_PAD_EIM_DA13__EIM_DA13 0x80000000 + MX51_PAD_EIM_DA14__EIM_DA14 0x80000000 + MX51_PAD_EIM_DA15__EIM_DA15 0x80000000 + MX51_PAD_EIM_A16__EIM_A16 0x80000000 + MX51_PAD_EIM_A17__EIM_A17 0x80000000 + MX51_PAD_EIM_A18__EIM_A18 0x80000000 + MX51_PAD_EIM_A19__EIM_A19 0x80000000 + MX51_PAD_EIM_A20__EIM_A20 0x80000000 + MX51_PAD_EIM_A21__EIM_A21 0x80000000 + MX51_PAD_EIM_A22__EIM_A22 0x80000000 + MX51_PAD_EIM_A23__EIM_A23 0x80000000 + MX51_PAD_EIM_A24__EIM_A24 0x80000000 + MX51_PAD_EIM_A25__EIM_A25 0x80000000 + MX51_PAD_EIM_A26__EIM_A26 0x80000000 + MX51_PAD_EIM_A27__EIM_A27 0x80000000 + MX51_PAD_EIM_D16__EIM_D16 0x80000000 + MX51_PAD_EIM_D17__EIM_D17 0x80000000 + MX51_PAD_EIM_D18__EIM_D18 0x80000000 + MX51_PAD_EIM_D19__EIM_D19 0x80000000 + MX51_PAD_EIM_D20__EIM_D20 0x80000000 + MX51_PAD_EIM_D21__EIM_D21 0x80000000 + MX51_PAD_EIM_D22__EIM_D22 0x80000000 + MX51_PAD_EIM_D23__EIM_D23 0x80000000 + MX51_PAD_EIM_D24__EIM_D24 0x80000000 + MX51_PAD_EIM_D25__EIM_D25 0x80000000 + MX51_PAD_EIM_D26__EIM_D26 0x80000000 + MX51_PAD_EIM_D27__EIM_D27 0x80000000 + MX51_PAD_EIM_D28__EIM_D28 0x80000000 + MX51_PAD_EIM_D29__EIM_D29 0x80000000 + MX51_PAD_EIM_D30__EIM_D30 0x80000000 + MX51_PAD_EIM_D31__EIM_D31 0x80000000 + MX51_PAD_EIM_OE__EIM_OE 0x80000000 + MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000 + MX51_PAD_EIM_LBA__EIM_LBA 0x80000000 + MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi index 9b3acf6e4282..63164266af83 100644 --- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi +++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi @@ -42,6 +42,17 @@ compatible = "nxp,pcf8563"; reg = <0x51>; }; + + tsc2007: tsc2007@49 { + compatible = "ti,tsc2007"; + gpios = <&gpio4 0 1>; + interrupt-parent = <&gpio4>; + interrupts = <0x0 0x8>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007_1>; + reg = <0x49>; + ti,x-plate-ohms = <180>; + }; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 5cec4f322096..75e66c9c6144 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -24,6 +24,14 @@ model = "Eukrea CPUIMX51"; compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51"; + clocks { + clk24M: can_clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + }; + gpio_keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -50,6 +58,23 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_can: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "CAN_RST"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <20000>; + enable-active-high; + }; + }; + sound { compatible = "eukrea,asoc-tlv320"; eukrea,model = "imx51-eukrea-tlv320aic23"; @@ -57,6 +82,20 @@ fsl,mux-int-port = <2>; fsl,mux-ext-port = <3>; }; + + usbphy { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + usbh1phy: usbh1phy@0 { + compatible = "usb-nop-xceiv"; + reg = <0>; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + }; }; &audmux { @@ -72,6 +111,26 @@ status = "okay"; }; +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk24M>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <®_can>; + }; +}; + &i2c1 { tlv320aic23: codec@1a { compatible = "ti,tlv320aic23"; @@ -90,6 +149,23 @@ >; }; + + pinctrl_can: cangrp { + fsl,pins = < + MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */ + MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */ + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 @@ -151,6 +227,29 @@ MX51_PAD_CSI1_D9__GPIO3_13 0x1f5 >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5 + MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5 + MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5 + MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5 + MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5 + MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5 + MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5 + MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5 + MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5 + MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5 + MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5 + MX51_PAD_USBH1_STP__USBH1_STP 0x1e5 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 + >; + }; }; }; @@ -173,3 +272,24 @@ fsl,uart-has-rtscts; status = "okay"; }; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + fsl,usbphy = <&usbh1phy>; + dr_mode = "host"; + phy_type = "ulpi"; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi_wide"; + status = "okay"; +}; + +&usbphy0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 150bb4e2f744..bebbf3ba0d5e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -19,6 +19,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -537,6 +538,8 @@ }; nfc: nand@83fdb000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index a3431d784870..3e3f17aa93a1 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -17,6 +17,10 @@ model = "TQ MBa53 starter kit"; compatible = "tq,mba53", "tq,tqma53", "fsl,imx53"; + chosen { + stdout-path = &uart2; + }; + backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ede04fa4161f..fd8c60dde7de 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -13,6 +13,10 @@ #include "imx53.dtsi" / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x70000000 0x20000000>, <0xb0000000 0x20000000>; @@ -272,6 +276,14 @@ >; }; + pinctrl_vga_sync: vgasync-grp { + fsl,pins = < + /* VGA_HSYNC, VSYNC with max drive strength */ + MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6 + MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -281,6 +293,15 @@ }; }; +&tve { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vga_sync>; + fsl,tve-mode = "vga"; + fsl,hsync-pin = <4>; + fsl,vsync-pin = <6>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6a1bf4ff83d5..6456a0084388 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -726,8 +727,8 @@ clocks = <&clks IMX5_CLK_VPU_GATE>, <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; + resets = <&src 1>; iram = <&ocram>; - status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 5bfae54fb780..5373a5f2782b 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -11,6 +11,10 @@ model = "SolidRun HummingBoard DL/Solo"; compatible = "solidrun,hummingboard", "fsl,imx6dl"; + chosen { + stdout-path = &uart1; + }; + ir_recv: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio1 2 1>; @@ -67,6 +71,13 @@ status = "okay"; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_i2c1>; @@ -82,6 +93,13 @@ */ }; +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_i2c2>; + status = "okay"; +}; + &iomuxc { hummingboard { pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { @@ -97,6 +115,12 @@ >; }; + pinctrl_hummingboard_hdmi: hummingboard-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hummingboard_i2c1: hummingboard-i2c1 { fsl,pins = < MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 @@ -104,6 +128,13 @@ >; }; + pinctrl_hummingboard_i2c2: hummingboard-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_hummingboard_spdif: hummingboard-spdif { fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; }; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts new file mode 100644 index 000000000000..08e97801494e --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board"; + compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..964bc2ad3c5d --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" + +/ { + model = "Phytec phyFLEX-i.MX6 DualLite/Solo"; + compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts new file mode 100644 index 000000000000..909fafc0b650 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -0,0 +1,539 @@ +/* + * Copyright 2014 Iain Paton <ipaton0@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "RIoTboard i.MX6S"; + compatible = "riot,imx6s-riotboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: user1 { + label = "user1"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6-riotboard-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 31 0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + pmic: pf0100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + interrupt-parent = <&gpio5>; + interrupts = <16 8>; + + regulators { + reg_vddcore: sw1ab { /* VDDARM_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_vddsoc: sw1c { /* VDDSOC_IN */ + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-always-on; + }; + + reg_gen_3v3: sw2 { /* VDDHIGH_IN */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_ddr_1v5a: sw3a { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_1v5b: sw3b { /* NVCC_DRAM, NVCC_RGMII */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_ddr_vtt: sw4 { /* MIPI conn */ + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-always-on; + }; + + reg_5v_600mA: swbst { /* not used */ + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + reg_snvs_3v: vsnvs { /* VDD_SNVS_IN */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vref_reg: vrefddr { /* VREF_DDR */ + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1_1v5: vgen1 { /* not used */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2_1v2_eth: vgen2 { /* pcie ? */ + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + reg_vgen3_2v8: vgen3 { /* not used */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + reg_vgen4_1v8: vgen4 { /* NVCC_SD3 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5_2v5_sgtl: vgen5 { /* Pwr LED & 5V0_delayed enable */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6_3v3: vgen6 { /* #V#_DELAYED enable, MIPI */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clocks = <&clks 116>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 0>; + wp-gpios = <&gpio7 1 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + vmmc-supply = <®_3p3v>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + imx6-riotboard { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x000b1 /* CS0 */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x000b1 /* CS1 */ + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 /* CS0 */ + MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x000b1 /* CS1 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 5c5f574330f9..0a9c49d69d41 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -84,9 +84,10 @@ i2c4: i2c@021f8000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,imx1-i2c"; + compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 116>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e4ae38fd0269..e0302636aff5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -18,6 +18,10 @@ model = "Data Modul eDM-QMX6 Board"; compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + aliases { gpio7 = &stmpe_gpio1; gpio8 = &stmpe_gpio2; @@ -91,6 +95,20 @@ }; }; +&ecspi5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi5>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio1 12 0>; + status = "okay"; + + flash: m25p80@0 { + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -105,7 +123,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 &pinctrl_stmpe1 - &pinctrl_stmpe2>; + &pinctrl_stmpe2 + &pinctrl_pfuze>; status = "okay"; pmic: pfuze100@08 { @@ -216,6 +235,8 @@ reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio1: stmpe_gpio { #gpio-cells = <2>; @@ -228,6 +249,8 @@ reg = <0x44>; interrupts = <2 0>; interrupt-parent = <&gpio5>; + vcc-supply = <&sw2_reg>; + vio-supply = <&sw2_reg>; stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; @@ -263,6 +286,15 @@ >; }; + pinctrl_ecspi5: ecspi5rp-1 { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000 + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 @@ -291,6 +323,12 @@ >; }; + pinctrl_pfuze: pfuze100grp1 { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 + >; + }; + pinctrl_stmpe1: stmpe1grp { fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>; }; diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 4a9b4dc9afc0..703539cf36d3 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -14,7 +14,7 @@ compatible = "zealz,imx6q-gk802", "fsl,imx6q"; chosen { - linux,stdout-path = &uart4; + stdout-path = &uart4; }; memory { @@ -48,6 +48,11 @@ }; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + /* Internal I2C */ &i2c2 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index e51bb3f0fd56..3689eaa58826 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -157,6 +157,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts index 5607c331fca8..c139ac0ebe15 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts +++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts @@ -11,40 +11,17 @@ /dts-v1/; #include "imx6q-phytec-pfla02.dtsi" +#include "imx6qdl-phytec-pbab01.dtsi" / { model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board"; compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q"; -}; - -&fec { - status = "okay"; -}; -&gpmi { - status = "okay"; + chosen { + stdout-path = &uart4; + }; }; &sata { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - status = "okay"; -}; - -&usdhc2 { - status = "okay"; -}; - -&usdhc3 { - status = "okay"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi index 324f1550976b..cd20d0a948de 100644 --- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi @@ -10,316 +10,13 @@ */ #include "imx6q.dtsi" +#include "imx6qdl-phytec-pfla02.dtsi" / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { reg = <0x10000000 0x80000000>; }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 15 0>; - }; - - reg_usb_h1_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio1 0 0>; - }; - }; -}; - -&ecspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi3>; - status = "okay"; - fsl,spi-num-chipselects = <1>; - cs-gpios = <&gpio4 24 0>; - - flash@0 { - compatible = "m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - eeprom@50 { - compatible = "atmel,24c32"; - reg = <0x50>; - }; - - pmic@58 { - compatible = "dialog,da9063"; - reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ - - regulators { - vddcore_reg: bcore1 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vddsoc_reg: bcore2 { - regulator-min-microvolt = <730000>; - regulator-max-microvolt = <1380000>; - regulator-always-on; - }; - - vdd_ddr3_reg: bpro { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - - vdd_3v3_reg: bperi { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_buckmem_reg: bmem { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_eth_reg: bio { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vdd_eth_io_reg: ldo4 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - vdd_mx6_snvs_reg: ldo5 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - vdd_3v3_pmic_io_reg: ldo6 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_sd0_reg: ldo9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_sd1_reg: ldo10 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_mx6_high_reg: ldo11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - }; - }; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ - >; - }; - - pinctrl_ecspi3: ecspi3grp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 - MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 - MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 - >; - }; - - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 - MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 - MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 - MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 - MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 - MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - >; - }; - - pinctrl_usdhc3_cdwp: usdhc3cdwp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 - >; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 0>; - status = "disabled"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; - status = "disabled"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "disabled"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - status = "disabled"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "disabled"; -}; - -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; - status = "disabled"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 - &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; - status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index ed397d149ab6..6c561060bf5c 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -16,6 +16,10 @@ model = "Udoo i.MX6 Quad Board"; compatible = "udoo,imx6q-udoo", "fsl,imx6q"; + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -28,6 +32,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + &iomuxc { imx6q-udoo { pinctrl_enet: enetgrp { @@ -51,6 +67,13 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index c2a24888a276..25da82a03110 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -55,6 +55,20 @@ }; }; +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cubox_i_i2c2>; + status = "okay"; +}; + &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_i2c3>; @@ -69,6 +83,19 @@ &iomuxc { cubox_i { + pinctrl_cubox_i_hdmi: cubox-i-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_cubox_i_i2c2: cubox-i-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + pinctrl_cubox_i_i2c3: cubox-i-i2c3 { fsl,pins = < MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 25cf035dd36e..2c253d6d20bd 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -22,7 +22,7 @@ }; chosen { - linux,stdout-path = &uart1; + stdout-path = &uart1; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index 98a422153ce7..31665adcbf39 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -101,6 +101,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 035d3a85c318..367af3ec9435 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -27,6 +27,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -148,6 +155,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -394,6 +406,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -436,6 +454,27 @@ &ldb { status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + }; + }; + }; }; &pcie { @@ -443,6 +482,12 @@ status = "okay"; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index c8e5ae06deaf..c91b5a6c769b 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -157,6 +164,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -434,6 +446,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -508,6 +526,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 2795dfc8c926..698d3063b295 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -30,6 +30,13 @@ bootargs = "console=ttymxc1,115200"; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + }; + leds { compatible = "gpio-leds"; @@ -147,6 +154,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -456,6 +468,12 @@ >; }; + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 @@ -530,6 +548,12 @@ }; }; +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + &ssi1 { fsl,mode = "i2s-slave"; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 99be301b5232..4c4b17596c8b 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi new file mode 100644 index 000000000000..584721264121 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -0,0 +1,102 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + chosen { + linux,stdout-path = &uart4; + }; +}; + +&fec { + status = "okay"; +}; + +&gpmi { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; + + tlv320@18 { + compatible = "ti,tlv320aic3x"; + reg = <0x18>; + }; + + stmpe@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + }; + + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + + adc@64 { + compatible = "maxim,max1037"; + reg = <0x64>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi new file mode 100644 index 000000000000..faa3494a69d4 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -0,0 +1,356 @@ +/* + * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Phytec phyFLEX-i.MX6 Ouad"; + compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 15 0>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 0 0>; + }; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + green { + label = "phyflex:green"; + gpios = <&gpio1 30 0>; + }; + + red { + label = "phyflex:red"; + gpios = <&gpio2 31 0>; + }; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 24 0>; + + flash@0 { + compatible = "m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + + pmic@58 { + compatible = "dialog,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio4>; + interrupts = <17 0x8>; /* active-low GPIO4_17 */ + + regulators { + vddcore_reg: bcore1 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vddsoc_reg: bcore2 { + regulator-min-microvolt = <730000>; + regulator-max-microvolt = <1380000>; + regulator-always-on; + }; + + vdd_ddr3_reg: bpro { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vdd_3v3_reg: bperi { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_buckmem_reg: bmem { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_eth_reg: bio { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_eth_io_reg: ldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_mx6_snvs_reg: ldo5 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + vdd_3v3_pmic_io_reg: ldo6 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sd0_reg: ldo9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_sd1_reg: ldo10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_mx6_high_reg: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6q-phytec-pfla02 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ + MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_cdwp: usdhc3cdwp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 + >; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "disabled"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "disabled"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 0>; + status = "disabled"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 + &pinctrl_usdhc3_cdwp>; + cd-gpios = <&gpio1 27 0>; + wp-gpios = <&gpio1 29 0>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 3bec128c7971..6df6127bf835 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -13,6 +13,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart2; + }; + memory { reg = <0x10000000 0x40000000>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 0d816d3be4b6..40ea36534643 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + chosen { + stdout-path = &uart1; + }; + memory { reg = <0x10000000 0x40000000>; }; @@ -105,6 +109,17 @@ default-brightness-level = <7>; status = "okay"; }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + red { + gpios = <&gpio1 2 0>; + default-state = "on"; + }; + }; }; &audmux { @@ -137,6 +152,11 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -373,6 +393,12 @@ >; }; + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -421,6 +447,29 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; }; }; @@ -449,6 +498,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -496,3 +552,12 @@ wp-gpios = <&gpio2 1 0>; status = "okay"; }; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index bdfdf89d405f..5c6f10c43f65 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -62,6 +62,18 @@ status = "okay"; }; +&hdmi { + ddc-i2c-bus = <&i2c1>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -127,6 +139,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index eca0971d4db1..ce0599134a69 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -16,6 +16,7 @@ / { aliases { + ethernet0 = &fec; can0 = &can1; can1 = &can2; gpio0 = &gpio1; @@ -140,15 +141,16 @@ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; - interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; - clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; + clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d26b099260a3..2d4e5285f3f3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -14,6 +14,7 @@ / { aliases { + ethernet0 = &fec; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 74b3b63e94cf..c568f067604d 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -58,3 +58,84 @@ &usb1 { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x1FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index c93d06f9f2a8..1f90cbf27fd7 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -138,3 +138,32 @@ }; }; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 50a70132ac9e..fec43128a2e0 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -35,3 +35,84 @@ &usb { status = "okay"; }; + +&i2c0 { + dtt@50 { + compatible = "at,24c1024"; + reg = <0x50>; + }; +}; + +&aemif { + cs0 { + #address-cells = <2>; + #size-cells = <1>; + clock-ranges; + ranges; + + ti,cs-chipselect = <0>; + /* all timings in nanoseconds */ + ti,cs-min-turnaround-ns = <12>; + ti,cs-read-hold-ns = <6>; + ti,cs-read-strobe-ns = <23>; + ti,cs-read-setup-ns = <9>; + ti,cs-write-hold-ns = <8>; + ti,cs-write-strobe-ns = <23>; + ti,cs-write-setup-ns = <8>; + + nand@0,0 { + compatible = "ti,keystone-nand","ti,davinci-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x4000000 + 1 0 0x0000100>; + + ti,davinci-chipselect = <0>; + ti,davinci-mask-ale = <0x2000>; + ti,davinci-mask-cle = <0x4000>; + ti,davinci-mask-chipsel = <0>; + nand-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "params"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "ubifs"; + reg = <0x180000 0x7FE80000>; + }; + }; + }; +}; + +&spi0 { + nor_flash: n25q128a11@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Micron,n25q128a11"; + spi-max-frequency = <54000000>; + m25p,fast-read; + reg = <0>; + + partition@0 { + label = "u-boot-spl"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@1 { + label = "misc"; + reg = <0x80000 0xf80000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 90823eb90c1b..d9f99e7deb83 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -28,8 +28,6 @@ gic: interrupt-controller { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; - #size-cells = <0>; - #address-cells = <1>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, <0x0 0x02562000 0x0 0x2000>, @@ -66,6 +64,7 @@ compatible = "ti,keystone","simple-bus"; interrupt-parent = <&gic>; ranges = <0x0 0x0 0x0 0xc0000000>; + dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; rstctrl: reset-controller { compatible = "ti,keystone-reset"; @@ -102,11 +101,6 @@ interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; - - dtt@50 { - compatible = "at,24c1024"; - reg = <0x50>; - }; }; i2c1: i2c@2530400 { @@ -115,6 +109,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@2530800 { @@ -123,6 +119,8 @@ clock-frequency = <100000>; clocks = <&clki2c>; interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; }; spi0: spi@21000400 { @@ -132,6 +130,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@21000600 { @@ -141,6 +141,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@21000800 { @@ -150,6 +152,8 @@ ti,davinci-spi-intr-line = <0>; interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; + #address-cells = <1>; + #size-cells = <0>; }; usb_phy: usb_phy@2620738 { @@ -169,6 +173,8 @@ clock-names = "usb"; interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; ranges; + dma-coherent; + dma-ranges; status = "disabled"; dwc3@2690000 { diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 3916937d6818..dd81508b919b 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6192-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -92,7 +69,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 416d96e1302f..7dc7d6782e83 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -35,16 +35,9 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6281-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; marvell,function = "sata0"; @@ -53,22 +46,6 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -76,14 +53,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -94,7 +71,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 2902e0d7971d..4680eec990f0 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -19,7 +19,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -36,7 +36,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -56,15 +56,8 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,88f6282-pinctrl"; - reg = <0x10000 0x20>; - - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", "mpp19"; - marvell,function = "nand"; - }; pmx_sata0: pmx-sata0 { marvell,pins = "mpp5", "mpp21", "mpp23"; @@ -74,29 +67,16 @@ marvell,pins = "mpp4", "mpp20", "mpp22"; marvell,function = "sata1"; }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; + /* + * Default I2C1 pinctrl setting on mpp36/mpp37, + * overwrite marvell,pins on board level if required. + */ pmx_twsi1: pmx-twsi1 { marvell,pins = "mpp36", "mpp37"; marvell,function = "twsi1"; }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; pmx_sdio: pmx-sdio { marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16", "mpp17"; @@ -104,20 +84,20 @@ }; }; - thermal@10078 { + thermal: thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; status = "okay"; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - i2c@11100 { + i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; @@ -125,10 +105,12 @@ interrupts = <32>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi1>; + pinctrl-names = "default"; status = "disabled"; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -139,7 +121,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi index 3271e4c8ea07..9e1f741d74ff 100644 --- a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -1,31 +1,51 @@ / { + mbus { + pciec: pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie0: pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { compatible = "marvell,98dx4122-pinctrl"; - reg = <0x10000 0x20>; - pmx_nand: pmx-nand { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", - "mpp4", "mpp5", "mpp18", - "mpp19"; - marvell,function = "nand"; - }; - pmx_spi: pmx-spi { - marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; - marvell,function = "spi"; - }; - pmx_twsi0: pmx-twsi0 { - marvell,pins = "mpp8", "mpp9"; - marvell,function = "twsi0"; - }; - pmx_uart0: pmx-uart0 { - marvell,pins = "mpp10", "mpp11"; - marvell,function = "uart0"; - }; - pmx_uart1: pmx-uart1 { - marvell,pins = "mpp13", "mpp14"; - marvell,function = "uart1"; - }; }; }; }; + +&sata_phy0 { + status = "disabled"; +}; + +&sata_phy1 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index 6becedebaa4e..c9247f8672ae 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -30,6 +30,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -44,7 +45,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp39"; marvell,function = "gpio"; @@ -69,8 +70,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p16@0 { #address-cells = <1>; @@ -113,8 +112,6 @@ * UART0_TX = Testpoint 66 * See the Excito Wiki for more details. */ - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 3b62aeeaa3a2..ab6ab4933e6b 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_cloudbox_sata0: pmx-cloudbox-sata0 { marvell,pins = "mpp15"; marvell,function = "sata0"; @@ -25,9 +26,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <166666667>; status = "okay"; }; @@ -39,8 +37,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 02d1225ef99f..812df691ae3d 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -22,10 +22,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_sdio_gpios: pmx-sdio-gpios { marvell,pins = "mpp37", "mpp38"; marvell,function = "gpio"; @@ -33,10 +34,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; sata@80000 { @@ -59,8 +57,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; chip-delay = <25>; status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index bf7fe8ab88f4..d85ef0a91b50 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { @@ -51,8 +52,6 @@ }; serial@12100 { - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index cb9978c652f2..5e586ed04c58 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -13,6 +13,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; gpio-leds { diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index d5aa9564a287..113dcf056dcf 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -50,7 +50,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_power_back_on &pmx_present_sata0 &pmx_present_sata1 &pmx_fan_tacho @@ -183,8 +183,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; chip-delay = <35>; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index f31312ebd0d6..849736349511 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 28b3ee369778..6467c7924195 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_bluetooth: pmx-led-bluetooth { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -37,8 +38,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p40@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ds109.dts b/arch/arm/boot/dts/kirkwood-ds109.dts index 772092c94ca3..d4bcc1c7f6b3 100644 --- a/arch/arm/boot/dts/kirkwood-ds109.dts +++ b/arch/arm/boot/dts/kirkwood-ds109.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds110jv10.dts b/arch/arm/boot/dts/kirkwood-ds110jv10.dts index aabafbe0da4c..95bf83b91b4a 100644 --- a/arch/arm/boot/dts/kirkwood-ds110jv10.dts +++ b/arch/arm/boot/dts/kirkwood-ds110jv10.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds111.dts b/arch/arm/boot/dts/kirkwood-ds111.dts index 16ec7fbab573..61f47fbe44d0 100644 --- a/arch/arm/boot/dts/kirkwood-ds111.dts +++ b/arch/arm/boot/dts/kirkwood-ds111.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index cff1b2388765..bf4143c6cb8f 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds209.dts b/arch/arm/boot/dts/kirkwood-ds209.dts index 330411993d38..6d25093a9ac4 100644 --- a/arch/arm/boot/dts/kirkwood-ds209.dts +++ b/arch/arm/boot/dts/kirkwood-ds209.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds210.dts b/arch/arm/boot/dts/kirkwood-ds210.dts index 6052eaa37d4f..2f1933efcac1 100644 --- a/arch/arm/boot/dts/kirkwood-ds210.dts +++ b/arch/arm/boot/dts/kirkwood-ds210.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds212.dts b/arch/arm/boot/dts/kirkwood-ds212.dts index 7f76cd30e84e..99afd462f956 100644 --- a/arch/arm/boot/dts/kirkwood-ds212.dts +++ b/arch/arm/boot/dts/kirkwood-ds212.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds212j.dts b/arch/arm/boot/dts/kirkwood-ds212j.dts index 1f83a00f1f74..f5c4213fc67c 100644 --- a/arch/arm/boot/dts/kirkwood-ds212j.dts +++ b/arch/arm/boot/dts/kirkwood-ds212j.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds409.dts b/arch/arm/boot/dts/kirkwood-ds409.dts index 0a573add44a2..e80a962ebba0 100644 --- a/arch/arm/boot/dts/kirkwood-ds409.dts +++ b/arch/arm/boot/dts/kirkwood-ds409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds409slim.dts b/arch/arm/boot/dts/kirkwood-ds409slim.dts index 1848a6245fd3..cae5af4b88b5 100644 --- a/arch/arm/boot/dts/kirkwood-ds409slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds409slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-32-35 { diff --git a/arch/arm/boot/dts/kirkwood-ds411.dts b/arch/arm/boot/dts/kirkwood-ds411.dts index a1737b4311c6..623cd4a37d71 100644 --- a/arch/arm/boot/dts/kirkwood-ds411.dts +++ b/arch/arm/boot/dts/kirkwood-ds411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-ds411j.dts b/arch/arm/boot/dts/kirkwood-ds411j.dts index 0cde914eceae..3348e330f074 100644 --- a/arch/arm/boot/dts/kirkwood-ds411j.dts +++ b/arch/arm/boot/dts/kirkwood-ds411j.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-ds411slim.dts b/arch/arm/boot/dts/kirkwood-ds411slim.dts index aef0cadc2c78..a0a1fad8b4de 100644 --- a/arch/arm/boot/dts/kirkwood-ds411slim.dts +++ b/arch/arm/boot/dts/kirkwood-ds411slim.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-1 { diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index eb9329420107..aa60a0b049a7 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index 2d51fce74a5a..c5a1fc75c7a3 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health_r: pmx-led-health-r { marvell,pins = "mpp46"; marvell,function = "gpio"; @@ -36,7 +37,6 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "ok"; }; @@ -101,13 +101,19 @@ status = "okay"; ethphy0: ethernet-phy@0 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <0>; + phy-connection-type = "rgmii-id"; }; ethphy1: ethernet-phy@1 { - compatible = "marvell,88e1121"; + /* Marvell 88E1121R */ + compatible = "ethernet-phy-id0141.0cb0", + "ethernet-phy-ieee802.3-c22"; reg = <1>; + phy-connection-type = "rgmii-id"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index a1add3f215e3..bfa5edde179c 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_os_red: pmx-led-os-red { marvell,pins = "mpp22"; marvell,function = "gpio"; @@ -104,8 +105,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 8d8c80e3656d..38e31d15a62d 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -14,6 +14,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -29,7 +30,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_reset: pmx-button-reset { marvell,pins = "mpp12"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 59e7a5adeedb..05291f3990d0 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = < &pmx_led_sata_brt_ctrl_1 &pmx_led_sata_brt_ctrl_2 &pmx_led_backup_brt_ctrl_1 diff --git a/arch/arm/boot/dts/kirkwood-km_common.dtsi b/arch/arm/boot/dts/kirkwood-km_common.dtsi new file mode 100644 index 000000000000..8367c772c764 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_common.dtsi @@ -0,0 +1,48 @@ +/ { + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + }; + + i2c@0 { + compatible = "i2c-gpio"; + gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ + &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; +}; + +&nand { + status = "okay"; + chip-delay = <25>; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_fixedeth.dts b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts new file mode 100644 index 000000000000..9895f2b10f8a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_fixedeth.dts @@ -0,0 +1,23 @@ +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" + +/ { + model = "Keymile Kirkwood Fixed Eth"; + compatible = "keymile,km_fixedeth", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + speed = <1000>; /* <SPEED_1000> */ + duplex = <1>; /* <DUPLEX_FULL> */ + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 04a1e44541b3..235bf382fff9 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -2,6 +2,7 @@ #include "kirkwood.dtsi" #include "kirkwood-98dx4122.dtsi" +#include "kirkwood-km_common.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -11,44 +12,6 @@ device_type = "memory"; reg = <0x00000000 0x08000000>; }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; - - ocp@f1000000 { - pinctrl: pinctrl@10000 { - pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >; - pinctrl-names = "default"; - - pmx_i2c_gpio_sda: pmx-gpio-sda { - marvell,pins = "mpp8"; - marvell,function = "gpio"; - }; - pmx_i2c_gpio_scl: pmx-gpio-scl { - marvell,pins = "mpp9"; - marvell,function = "gpio"; - }; - }; - - serial@12000 { - status = "ok"; - }; - }; - - i2c@0 { - compatible = "i2c-gpio"; - gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ - &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <2>; /* ~100 kHz */ - }; -}; - -&nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; - status = "ok"; - chip-delay = <25>; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts index 6761ffa2c4ab..24425660e973 100644 --- a/arch/arm/boot/dts/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -37,14 +38,10 @@ ocp@f1000000 { serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { @@ -54,7 +51,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp14"; marvell,function = "gpio"; @@ -139,7 +136,6 @@ &nand { /* Total size : 512MB */ status = "okay"; - pinctrl-0 = <&pmx_nand>; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 1656653d339b..53484474df1f 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_power_hdd: pmx-power-hdd { marvell,pins = "mpp10"; marvell,function = "gpo"; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 73722c067501..f3a991837515 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -12,9 +12,10 @@ reg = <0x00000000 0x20000000>; }; - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; mbus { pcie-controller { @@ -27,7 +28,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_led_health: pmx-led-health { marvell,pins = "mpp7"; marvell,function = "gpo"; @@ -89,11 +90,9 @@ }; - serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - }; + serial@12000 { + status = "okay"; + }; rtc@10300 { status = "disabled"; @@ -163,8 +162,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index b939f4f52d16..8f76d28759a3 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -28,6 +28,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -41,7 +42,7 @@ }; ocp@f1000000 { - pinctrl@10000 { + pin-controller@10000 { pmx_usb_led: pmx-usb-led { marvell,pins = "mpp12"; marvell,function = "gpo"; @@ -59,8 +60,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -74,10 +73,7 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; - clock-frequency = <200000000>; - status = "ok"; + status = "okay"; }; ehci@50000 { diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index 4838478019cc..fd733c63bc27 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -38,7 +39,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -112,8 +113,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts index 7c8a0d9d8d1f..b514d643fb6c 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -25,6 +25,7 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_button_power: pmx-button-power { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -119,8 +120,6 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index e6e5ec4fe6b9..fe6c0246db1a 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -4,10 +4,11 @@ / { chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_ns2_sata0: pmx-ns2-sata0 { marvell,pins = "mpp21"; marvell,function = "sata0"; @@ -19,14 +20,10 @@ }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -45,8 +42,6 @@ }; i2c@11000 { - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; status = "okay"; eeprom@50 { diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index 0a07af9d8e58..6139df0f376c 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" / { compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; @@ -12,6 +12,7 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; mbus { @@ -25,7 +26,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_unknown>; pinctrl-names = "default"; @@ -59,26 +60,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -94,10 +75,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; }; i2c@11000 { @@ -110,30 +87,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; - pinctrl-names = "default"; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index 27ca6a79c48a..3d2b3d494c19 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -1,6 +1,6 @@ /dts-v1/; -#include "kirkwood-nsa310-common.dtsi" +#include "kirkwood-nsa3x0-common.dtsi" /* * There are at least two different NSA310 designs. This variant does @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_led_esata_green: pmx-led-esata-green { @@ -38,11 +39,6 @@ marvell,function = "gpio"; }; - pmx_usb_power_off: pmx-usb-power-off { - marvell,pins = "mpp21"; - marvell,function = "gpio"; - }; - pmx_led_sys_green: pmx-led-sys-green { marvell,pins = "mpp28"; marvell,function = "gpio"; @@ -53,26 +49,6 @@ marvell,function = "gpio"; }; - pmx_btn_reset: pmx-btn-reset { - marvell,pins = "mpp36"; - marvell,function = "gpio"; - }; - - pmx_btn_copy: pmx-btn-copy { - marvell,pins = "mpp37"; - marvell,function = "gpio"; - }; - - pmx_led_copy_green: pmx-led-copy-green { - marvell,pins = "mpp39"; - marvell,function = "gpio"; - }; - - pmx_led_copy_red: pmx-led-copy-red { - marvell,pins = "mpp40"; - marvell,function = "gpio"; - }; - pmx_led_hdd_green: pmx-led-hdd-green { marvell,pins = "mpp41"; marvell,function = "gpio"; @@ -83,11 +59,6 @@ marvell,function = "gpio"; }; - pmx_btn_power: pmx-btn-power { - marvell,pins = "mpp46"; - marvell,function = "gpio"; - }; - }; i2c@11000 { @@ -100,28 +71,6 @@ }; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - label = "Power Button"; - linux,code = <KEY_POWER>; - gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; - }; - button@2 { - label = "Copy Button"; - linux,code = <KEY_COPY>; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - }; - button@3 { - label = "Reset Button"; - linux,code = <KEY_RESTART>; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - }; - }; - gpio-leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts new file mode 100644 index 000000000000..24f686d1044d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts @@ -0,0 +1,215 @@ +/* Device tree file for the Zyxel NSA 320 NAS box. + * + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Based upon the board setup file created by Peter Schildmann */ + +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" + +/ { + model = "Zyxel NSA320"; + compatible = "zyxel,nsa320", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-names = "default"; + + /* SATA Activity and Present pins are not connected */ + pmx_sata0: pmx-sata0 { + marvell,pins ; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins ; + marvell,function = "sata1"; + }; + + pmx_led_hdd2_green: pmx-led-hdd2-green { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + pmx_led_hdd2_red: pmx-led-hdd2-red { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_mcu_data: pmx-mcu-data { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_led_usb_green: pmx-led-usb-green { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + + pmx_mcu_clk: pmx-mcu-clk { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_mcu_act: pmx-mcu-act { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_led_sys_green: pmx-led-sys-green { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + pmx_led_sys_orange: pmx-led-sys-orange { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_green: pmx-led-hdd1-green { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_hdd1_red: pmx-led-hdd1-red { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + pmx_htp: pmx-htp { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + + /* Buzzer needs to be switched at around 1kHz so is + not compatible with the gpio-beeper driver. */ + pmx_buzzer: pmx-buzzer { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_vid_b1: pmx-vid-b1 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_power_resume_data: pmx-power-resume-data { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_power_resume_clk: pmx-power-resume-clk { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + pcf8563: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + regulators { + usb0_power: regulator@1 { + enable-active-high; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red + &pmx_led_usb_green + &pmx_led_sys_green &pmx_led_sys_orange + &pmx_led_copy_green &pmx_led_copy_red + &pmx_led_hdd1_green &pmx_led_hdd1_red>; + pinctrl-names = "default"; + + green-sys { + label = "nsa320:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + orange-sys { + label = "nsa320:orange:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + green-hdd1 { + label = "nsa320:green:hdd1"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + red-hdd1 { + label = "nsa320:red:hdd1"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + green-hdd2 { + label = "nsa320:green:hdd2"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + red-hdd2 { + label = "nsa320:red:hdd2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + green-usb { + label = "nsa320:green:usb"; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + green-copy { + label = "nsa320:green:copy"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + red-copy { + label = "nsa320:red:copy"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + }; + + /* The following pins are currently not assigned to a driver, + some of them should be configured as inputs. + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act + &pmx_htp &pmx_vid_b1 + &pmx_power_resume_data &pmx_power_resume_clk>; */ +}; + +&mdio { + status = "okay"; + ethphy0: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi index e2cc85cc3b87..2075a2e828f1 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi @@ -15,17 +15,42 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { - pmx_usb_power_off: pmx-usb-power-off { + pmx_usb_power: pmx-usb-power { marvell,pins = "mpp21"; marvell,function = "gpio"; }; + pmx_pwr_off: pmx-pwr-off { marvell,pins = "mpp48"; marvell,function = "gpio"; }; + pmx_btn_reset: pmx-btn-reset { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + + pmx_btn_copy: pmx-btn-copy { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + + pmx_btn_power: pmx-btn-power { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_led_copy_green: pmx-led-copy-green { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + + pmx_led_copy_red: pmx-led-copy-red { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; }; serial@12000 { @@ -45,17 +70,42 @@ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; + pinctrl-names = "default"; + + button@1 { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + button@2 { + label = "Copy Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_usb_power_off>; + pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; - usb0_power_off: regulator@1 { + usb0_power: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "USB Power Off"; + regulator-name = "USB Power"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index 0650beafc1de..fb9dc227255d 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -14,19 +14,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -36,8 +33,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "sii,s35390a"; @@ -45,7 +40,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -133,8 +128,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 38520a287514..d5e3bc518968 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -26,19 +26,16 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; serial@12100 { - status = "ok"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -48,8 +45,6 @@ i2c@11100 { status = "okay"; - pinctrl-0 = <&pmx_twsi1>; - pinctrl-names = "default"; s24c02: s24c02@50 { compatible = "atmel,24c02"; @@ -57,7 +52,7 @@ }; }; - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_dip_switches &pmx_gpio_header>; pinctrl-names = "default"; @@ -109,13 +104,6 @@ marvell,pins = "mpp41", "mpp42", "mpp43"; marvell,function = "gpio"; }; - - pmx_ge1: pmx-ge1 { - marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", - "mpp24", "mpp25", "mpp26", "mpp27", - "mpp30", "mpp31", "mpp32", "mpp33"; - marvell,function = "ge1"; - }; }; }; @@ -158,8 +146,6 @@ &nand { chip-delay = <25>; status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "uboot"; @@ -213,8 +199,6 @@ ð1 { status = "okay"; - pinctrl-0 = <&pmx_ge1>; - pinctrl-names = "default"; ethernet1-port@0 { phy-handle = <ðphy1>; }; diff --git a/arch/arm/boot/dts/kirkwood-openrd-base.dts b/arch/arm/boot/dts/kirkwood-openrd-base.dts new file mode 100644 index 000000000000..8af58999606d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-base.dts @@ -0,0 +1,42 @@ +/* + * Marvell OpenRD Base Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * base variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Base"; + compatible = "marvell,openrd-base", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + serial@12100 { + status = "okay"; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd-client.dts b/arch/arm/boot/dts/kirkwood-openrd-client.dts new file mode 100644 index 000000000000..887b9c1fee43 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-client.dts @@ -0,0 +1,73 @@ +/* + * Marvell OpenRD Client Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * client variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Client"; + compatible = "marvell,openrd-client", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio0>; + }; + + simple-audio-card,codec { + sound-dai = <&cs42l51>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@8 { + reg = <8>; + }; + ethphy1: ethernet-phy@24 { + reg = <24>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts new file mode 100644 index 000000000000..9f12f8b53e24 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd-ultimate.dts @@ -0,0 +1,58 @@ +/* + * Marvell OpenRD Ultimate Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are specific to OpenRD + * ultimate variant of the Marvell Kirkwood Development Board. + */ + +/dts-v1/; + +#include "kirkwood-openrd.dtsi" + +/ { + model = "OpenRD Ultimate"; + compatible = "marvell,openrd-ultimate", "marvell,openrd", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + clock-frequency = <400000>; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openrd.dtsi b/arch/arm/boot/dts/kirkwood-openrd.dtsi new file mode 100644 index 000000000000..d3330dadf7ed --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openrd.dtsi @@ -0,0 +1,90 @@ +/* + * Marvell OpenRD (Base|Client|Ultimate) Board Description + * + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common between the three + * variants of the Marvell Kirkwood Development Board. + */ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + mbus { + pcie-controller { + status = "okay"; + + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pinctrl-0 = <&pmx_select28 &pmx_sdio_cd &pmx_select34>; + pinctrl-names = "default"; + + pmx_select28: pmx-select-uart-sd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_select34: pmx-select-rs232-rs484 { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "okay"; + + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + mvsdio@90000 { + status = "okay"; + cd-gpios = <&gpio0 29 9>; + }; + }; +}; + +&nand { + status = "okay"; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@600000 { + label = "root"; + reg = <0x0600000 0x1FA00000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index e9dd85049297..35a29dee8dd8 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -26,6 +26,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -39,7 +40,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_usb_power>; pinctrl-names = "default"; @@ -56,8 +57,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi index d6368c39102e..26cf0e0ccefd 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi @@ -22,6 +22,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -35,7 +36,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_sdio_cd>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-rs212.dts b/arch/arm/boot/dts/kirkwood-rs212.dts index 93ec3d00c6ab..3b19f1fd4cac 100644 --- a/arch/arm/boot/dts/kirkwood-rs212.dts +++ b/arch/arm/boot/dts/kirkwood-rs212.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-rs409.dts b/arch/arm/boot/dts/kirkwood-rs409.dts index 311df4e5aa28..921ca49e85a4 100644 --- a/arch/arm/boot/dts/kirkwood-rs409.dts +++ b/arch/arm/boot/dts/kirkwood-rs409.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-150-15-18 { diff --git a/arch/arm/boot/dts/kirkwood-rs411.dts b/arch/arm/boot/dts/kirkwood-rs411.dts index f90da850bb31..02852b0c809f 100644 --- a/arch/arm/boot/dts/kirkwood-rs411.dts +++ b/arch/arm/boot/dts/kirkwood-rs411.dts @@ -24,6 +24,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; gpio-fan-100-15-35-3 { diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 1ff848d570a9..7196c7f3e109 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -17,10 +17,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_usb_power_enable: pmx-usb-power-enable { marvell,pins = "mpp29"; @@ -44,8 +45,6 @@ }; }; serial@12000 { - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; status = "okay"; }; }; @@ -72,8 +71,6 @@ }; &nand { - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; status = "okay"; partition@0 { diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 4227c974729d..811e0971fc58 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -25,7 +25,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pmx_alarmled_12: pmx-alarmled-12 { marvell,pins = "mpp12"; marvell,function = "gpio"; @@ -213,8 +213,6 @@ spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p80@0 { #address-cells = <1>; @@ -259,8 +257,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; rs5c372: rs5c372@32 { status = "disabled"; @@ -277,14 +273,10 @@ serial@12000 { status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 0bd70d928c69..610ec0f95858 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -27,6 +27,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -40,7 +41,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_i2s &pmx_sysrst>; pinctrl-names = "default"; @@ -64,10 +65,6 @@ marvell,function = "gpio"; }; - /* - * Redefined from kirkwood-6281.dtsi, because - * we don't use SPI CS on MPP0, but on MPP7. - */ pmx_spi: pmx-spi { marvell,pins = "mpp1", "mpp2", "mpp3", "mpp7"; marvell,function = "spi"; @@ -86,8 +83,6 @@ }; spi@10600 { - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; status = "okay"; flash@0 { @@ -127,6 +122,14 @@ i2c@11000 { status = "okay"; + + alc5621: alc5621@1a { + compatible = "realtek,alc5621"; + reg = <0x1a>; + #sound-dai-cells = <0>; + add-ctrl = <0x3700>; + jack-det-ctrl = <0x4810>; + }; }; serial@12000 { @@ -184,6 +187,31 @@ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Speaker", "SPKOUT", + "Speaker", "SPKOUTN", + "MIC1", "Mic Jack", + "MIC2", "Mic Jack"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speaker", "Speaker", + "Microphone", "Mic Jack"; + + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&audio>; + }; + + simple-audio-card,codec { + sound-dai = <&alc5621>; + }; + }; }; &mdio { diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 5fc817c2cb87..f5c8c0dd41dc 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -14,10 +14,11 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { /* * Switch positions * @@ -85,9 +86,7 @@ }; serial@12000 { - status = "ok"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; + status = "okay"; }; sata@80000 { @@ -96,9 +95,7 @@ }; i2c@11000 { - status = "ok"; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; + status = "okay"; }; mvsdio@90000 { @@ -175,8 +172,6 @@ &nand { status = "okay"; - pinctrl-0 = <&pmx_nand>; - pinctrl-names = "default"; partition@0 { label = "u-boot"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index c17ae45e19be..9767d73f3857 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -6,7 +6,7 @@ / { ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 0713d072758a..bfc1a32d4e42 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -16,7 +16,7 @@ }; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-0 = <&pmx_ram_size &pmx_board_id>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index 911f3a8cee23..df7f15276575 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -9,6 +9,7 @@ chosen { bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; }; mbus { @@ -25,8 +26,6 @@ i2c@11000 { status = "okay"; clock-frequency = <400000>; - pinctrl-0 = <&pmx_twsi0>; - pinctrl-names = "default"; s35390a: s35390a@30 { compatible = "s35390a"; @@ -34,16 +33,10 @@ }; }; serial@12000 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart0>; - pinctrl-names = "default"; }; serial@12100 { - clock-frequency = <200000000>; status = "okay"; - pinctrl-0 = <&pmx_uart1>; - pinctrl-names = "default"; }; poweroff@12100 { compatible = "qnap,power-off"; @@ -52,8 +45,6 @@ }; spi@10600 { status = "okay"; - pinctrl-0 = <&pmx_spi>; - pinctrl-names = "default"; m25p128@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts419.dtsi b/arch/arm/boot/dts/kirkwood-ts419.dtsi index 1a9c624c7a92..30ab93bfb1e4 100644 --- a/arch/arm/boot/dts/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts419.dtsi @@ -14,7 +14,7 @@ compatible = "qnap,ts419", "marvell,kirkwood"; ocp@f1000000 { - pinctrl: pinctrl@10000 { + pinctrl: pin-controller@10000 { pinctrl-names = "default"; pmx_USB_copy_button: pmx-USB-copy-button { diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 90384587c278..afc640cd80c5 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,7 +40,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - crypto@0301 { + cesa: crypto@0301 { compatible = "marvell,orion-crypto"; reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, <MBUS_ID(0x03, 0x01) 0 0x800>; @@ -61,6 +61,8 @@ chip-delay = <25>; /* set partition map and/or chip-delay in board dts */ clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_nand>; + pinctrl-names = "default"; status = "disabled"; }; }; @@ -71,13 +73,59 @@ #address-cells = <1>; #size-cells = <1>; + pinctrl: pin-controller@10000 { + /* set compatible property in SoC file */ + reg = <0x10000 0x20>; + + pmx_ge1: pmx-ge1 { + marvell,pins = "mpp20", "mpp21", "mpp22", "mpp23", + "mpp24", "mpp25", "mpp26", "mpp27", + "mpp30", "mpp31", "mpp32", "mpp33"; + marvell,function = "ge1"; + }; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", "mpp19"; + marvell,function = "nand"; + }; + + /* + * Default SPI0 pinctrl setting with CSn on mpp0, + * overwrite marvell,pins on board level if required. + */ + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + + /* + * Default UART pinctrl setting without RTS/CTS, + * overwrite marvell,pins on board level if required. + */ + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; #clock-cells = <1>; }; - spi@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -85,6 +133,8 @@ interrupts = <23>; reg = <0x10600 0x28>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_spi>; + pinctrl-names = "default"; status = "disabled"; }; @@ -120,24 +170,30 @@ interrupts = <29>; clock-frequency = <100000>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; interrupts = <33>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; interrupts = <34>; clocks = <&gate_clk 7>; + pinctrl-0 = <&pmx_uart1>; + pinctrl-names = "default"; status = "disabled"; }; @@ -146,7 +202,7 @@ reg = <0x20000 0x80>, <0x1500 0x20>; }; - system-controller@20000 { + sysc: system-controller@20000 { compatible = "marvell,orion-system-controller"; reg = <0x20000 0x120>; }; @@ -196,7 +252,7 @@ status = "okay"; }; - ehci@50000 { + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; @@ -204,7 +260,7 @@ status = "okay"; }; - xor@60800 { + dma0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -224,7 +280,7 @@ }; }; - xor@60900 { + dma1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60B00 0x100>; @@ -282,6 +338,8 @@ reg = <0x76000 0x4000>; clocks = <&gate_clk 19>; marvell,tx-checksum-limit = <1600>; + pinctrl-0 = <&pmx_ge1>; + pinctrl-names = "default"; status = "disabled"; ethernet1-port@0 { @@ -314,6 +372,7 @@ audio0: audio-controller@a0000 { compatible = "marvell,kirkwood-audio"; + #sound-dai-cells = <0>; reg = <0xa0000 0x2210>; interrupts = <24>; clocks = <&gate_clk 9>; diff --git a/arch/arm/boot/dts/omap2420-clocks.dtsi b/arch/arm/boot/dts/omap2420-clocks.dtsi new file mode 100644 index 000000000000..ce8c742d7e92 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-clocks.dtsi @@ -0,0 +1,270 @@ +/* + * Device Tree Source for OMAP2420 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&prcm_clocks { + sys_clkout2_src_gate: sys_clkout2_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <15>; + reg = <0x0070>; + }; + + sys_clkout2_src_mux: sys_clkout2_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + ti,bit-shift = <8>; + reg = <0x0070>; + }; + + sys_clkout2_src: sys_clkout2_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout2_src_gate>, <&sys_clkout2_src_mux>; + }; + + sys_clkout2: sys_clkout2 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout2_src>; + ti,bit-shift = <11>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + dsp_gate_ick: dsp_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <1>; + reg = <0x0810>; + }; + + dsp_div_ick: dsp_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + dsp_ick: dsp_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_ick>, <&dsp_div_ick>; + }; + + iva1_gate_ifck: iva1_gate_ifck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <10>; + reg = <0x0800>; + }; + + iva1_div_ifck: iva1_div_ifck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <8>; + reg = <0x0840>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; + }; + + iva1_ifck: iva1_ifck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva1_gate_ifck>, <&iva1_div_ifck>; + }; + + iva1_ifck_div: iva1_ifck_div { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&iva1_ifck>; + clock-mult = <1>; + clock-div = <2>; + }; + + iva1_mpu_int_ifck: iva1_mpu_int_ifck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&iva1_ifck_div>; + ti,bit-shift = <8>; + reg = <0x0800>; + }; + + wdt3_ick: wdt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <28>; + reg = <0x0210>; + }; + + wdt3_fck: wdt3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <28>; + reg = <0x0200>; + }; + + mmc_ick: mmc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <26>; + reg = <0x0210>; + }; + + mmc_fck: mmc_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <26>; + reg = <0x0200>; + }; + + eac_ick: eac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <24>; + reg = <0x0210>; + }; + + eac_fck: eac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <24>; + reg = <0x0200>; + }; + + i2c1_fck: i2c1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <19>; + reg = <0x0200>; + }; + + i2c2_fck: i2c2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <20>; + reg = <0x0200>; + }; + + vlynq_ick: vlynq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <3>; + reg = <0x0210>; + }; + + vlynq_gate_fck: vlynq_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <3>; + reg = <0x0200>; + }; + + core_d18_ck: core_d18_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <18>; + }; + + vlynq_mux_fck: vlynq_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&dummy_ck>, <&core_d6_ck>, <&dummy_ck>, <&core_d8_ck>, <&core_d9_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d12_ck>, <&dummy_ck>, <&dummy_ck>, <&dummy_ck>, <&core_d16_ck>, <&dummy_ck>, <&core_d18_ck>; + ti,bit-shift = <15>; + reg = <0x0240>; + }; + + vlynq_fck: vlynq_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&vlynq_gate_fck>, <&vlynq_mux_fck>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&vlynq_ick>, <&usb_fck>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>; + }; + + iva1_clkdm: iva1_clkdm { + compatible = "ti,clockdomain"; + clocks = <&iva1_mpu_int_ifck>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&uart1_ick>, <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, + <&uart3_ick>, <&uart3_fck>, <&cam_ick>, + <&mailboxes_ick>, <&wdt4_ick>, <&wdt4_fck>, + <&wdt3_ick>, <&wdt3_fck>, <&mspro_ick>, <&mspro_fck>, + <&mmc_ick>, <&mmc_fck>, <&fac_ick>, <&fac_fck>, + <&eac_ick>, <&eac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2c1_fck>, <&i2c2_ick>, <&i2c2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>; + }; +}; + +&func_96m_ck { + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <1>; +}; + +&dsp_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>, <0>, <0>, <0>, <12>; +}; + +&ssi_ssr_sst_div_fck { + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index 2d9979835f24..e83b0468080c 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2420", "ti,omap2"; ocp { + prcm: prcm@48008000 { + compatible = "ti,omap2-prcm"; + reg = <0x48008000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@48000000 { + compatible = "ti,omap2-scrm"; + reg = <0x48000000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@48004000 { compatible = "ti,omap-counter32k"; reg = <0x48004000 0x20>; diff --git a/arch/arm/boot/dts/omap2430-clocks.dtsi b/arch/arm/boot/dts/omap2430-clocks.dtsi new file mode 100644 index 000000000000..805f75df1cf2 --- /dev/null +++ b/arch/arm/boot/dts/omap2430-clocks.dtsi @@ -0,0 +1,344 @@ +/* + * Device Tree Source for OMAP2430 clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&scrm_clocks { + mcbsp3_mux_fck: mcbsp3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + reg = <0x02e8>; + }; + + mcbsp3_fck: mcbsp3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp3_gate_fck>, <&mcbsp3_mux_fck>; + }; + + mcbsp4_mux_fck: mcbsp4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x02e8>; + }; + + mcbsp4_fck: mcbsp4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp4_gate_fck>, <&mcbsp4_mux_fck>; + }; + + mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02e8>; + }; + + mcbsp5_fck: mcbsp5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp5_gate_fck>, <&mcbsp5_mux_fck>; + }; +}; + +&prcm_clocks { + iva2_1_gate_ick: iva2_1_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + iva2_1_div_ick: iva2_1_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dsp_fck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0840>; + ti,index-starts-at-one; + }; + + iva2_1_ick: iva2_1_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&iva2_1_gate_ick>, <&iva2_1_div_ick>; + }; + + mdm_gate_ick: mdm_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0c10>; + }; + + mdm_div_ick: mdm_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0c40>; + ti,dividers = <0>, <1>, <0>, <0>, <4>, <0>, <6>, <0>, <0>, <9>; + }; + + mdm_ick: mdm_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mdm_gate_ick>, <&mdm_div_ick>; + }; + + mdm_osc_ck: mdm_osc_ck { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <1>; + reg = <0x0c00>; + }; + + mcbsp3_ick: mcbsp3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x0214>; + }; + + mcbsp3_gate_fck: mcbsp3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <3>; + reg = <0x0204>; + }; + + mcbsp4_ick: mcbsp4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0214>; + }; + + mcbsp4_gate_fck: mcbsp4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x0204>; + }; + + mcbsp5_ick: mcbsp5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0214>; + }; + + mcbsp5_gate_fck: mcbsp5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <5>; + reg = <0x0204>; + }; + + mcspi3_ick: mcspi3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0214>; + }; + + mcspi3_fck: mcspi3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <9>; + reg = <0x0204>; + }; + + icr_ick: icr_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + reg = <0x0410>; + }; + + i2chs1_fck: i2chs1_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <19>; + reg = <0x0204>; + }; + + i2chs2_fck: i2chs2_fck { + #clock-cells = <0>; + compatible = "ti,omap2430-interface-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <20>; + reg = <0x0204>; + }; + + usbhs_ick: usbhs_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <6>; + reg = <0x0214>; + }; + + mmchs1_ick: mmchs1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0214>; + }; + + mmchs1_fck: mmchs1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <7>; + reg = <0x0204>; + }; + + mmchs2_ick: mmchs2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0214>; + }; + + mmchs2_fck: mmchs2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <8>; + reg = <0x0204>; + }; + + gpio5_ick: gpio5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0214>; + }; + + gpio5_fck: gpio5_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0204>; + }; + + mdm_intc_ick: mdm_intc_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0214>; + }; + + mmchsdb1_fck: mmchsdb1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <16>; + reg = <0x0204>; + }; + + mmchsdb2_fck: mmchsdb2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <17>; + reg = <0x0204>; + }; +}; + +&prcm_clockdomains { + gfx_clkdm: gfx_clkdm { + compatible = "ti,clockdomain"; + clocks = <&gfx_ick>; + }; + + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&cam_fck>, <&usb_fck>, <&usbhs_ick>; + }; + + wkup_clkdm: wkup_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dpll_ck>, <&emul_ck>, <&gpt1_ick>, <&gpios_ick>, + <&gpios_fck>, <&mpu_wdt_ick>, <&mpu_wdt_fck>, + <&sync_32k_ick>, <&wdt1_ick>, <&omapctrl_ick>, + <&icr_ick>; + }; + + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss_ick>, <&dss_54m_fck>; + }; + + core_l4_clkdm: core_l4_clkdm { + compatible = "ti,clockdomain"; + clocks = <&ssi_l4_ick>, <&gpt2_ick>, <&gpt3_ick>, <&gpt4_ick>, + <&gpt5_ick>, <&gpt6_ick>, <&gpt7_ick>, <&gpt8_ick>, + <&gpt9_ick>, <&gpt10_ick>, <&gpt11_ick>, <&gpt12_ick>, + <&mcbsp1_ick>, <&mcbsp2_ick>, <&mcbsp3_ick>, + <&mcbsp4_ick>, <&mcbsp5_ick>, <&mcspi1_ick>, + <&mcspi1_fck>, <&mcspi2_ick>, <&mcspi2_fck>, + <&mcspi3_ick>, <&mcspi3_fck>, <&uart1_ick>, + <&uart1_fck>, <&uart2_ick>, <&uart2_fck>, <&uart3_ick>, + <&uart3_fck>, <&cam_ick>, <&mailboxes_ick>, + <&wdt4_ick>, <&wdt4_fck>, <&mspro_ick>, <&mspro_fck>, + <&fac_ick>, <&fac_fck>, <&hdq_ick>, <&hdq_fck>, + <&i2c1_ick>, <&i2chs1_fck>, <&i2c2_ick>, <&i2chs2_fck>, + <&des_ick>, <&sha_ick>, <&rng_ick>, <&aes_ick>, + <&pka_ick>, <&mmchs1_ick>, <&mmchs1_fck>, + <&mmchs2_ick>, <&mmchs2_fck>, <&gpio5_ick>, + <&gpio5_fck>, <&mdm_intc_ick>, <&mmchsdb1_fck>, + <&mmchsdb2_fck>; + }; + + mdm_clkdm: mdm_clkdm { + compatible = "ti,clockdomain"; + clocks = <&mdm_osc_ck>; + }; +}; + +&func_96m_ck { + compatible = "ti,mux-clock"; + clocks = <&apll96_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0540>; +}; + +&dsp_div_fck { + ti,max-div = <4>; + ti,index-starts-at-one; +}; + +&ssi_ssr_sst_div_fck { + ti,max-div = <5>; + ti,index-starts-at-one; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 42d2c61c9e2d..c4e8013801ee 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -14,6 +14,32 @@ compatible = "ti,omap2430", "ti,omap2"; ocp { + prcm: prcm@49006000 { + compatible = "ti,omap2-prcm"; + reg = <0x49006000 0x1000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@49002000 { + compatible = "ti,omap2-scrm"; + reg = <0x49002000 0x1000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + counter32k: counter@49020000 { compatible = "ti,omap-counter32k"; reg = <0x49020000 0x20>; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi new file mode 100644 index 000000000000..a1365ca926eb --- /dev/null +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -0,0 +1,1244 @@ +/* + * Device Tree Source for OMAP24xx clock data + * + * Copyright (C) 2014 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +&scrm_clocks { + mcbsp1_mux_fck: mcbsp1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <2>; + reg = <0x0274>; + }; + + mcbsp1_fck: mcbsp1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp1_gate_fck>, <&mcbsp1_mux_fck>; + }; + + mcbsp2_mux_fck: mcbsp2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_96m_ck>, <&mcbsp_clks>; + ti,bit-shift = <6>; + reg = <0x0274>; + }; + + mcbsp2_fck: mcbsp2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&mcbsp2_gate_fck>, <&mcbsp2_mux_fck>; + }; +}; + +&prcm_clocks { + func_32k_ck: func_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + secure_32k_ck: secure_32k_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + virt_12m_ck: virt_12m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + virt_13m_ck: virt_13m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + virt_19200000_ck: virt_19200000_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19200000>; + }; + + virt_26m_ck: virt_26m_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + aplls_clkin_ck: aplls_clkin_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_19200000_ck>, <&virt_26m_ck>, <&virt_13m_ck>, <&virt_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0540>; + }; + + aplls_clkin_x2_ck: aplls_clkin_x2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&aplls_clkin_ck>; + clock-mult = <2>; + clock-div = <1>; + }; + + osc_ck: osc_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&aplls_clkin_ck>, <&aplls_clkin_x2_ck>; + ti,bit-shift = <6>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + sys_ck: sys_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&osc_ck>; + ti,bit-shift = <6>; + ti,max-div = <3>; + reg = <0x0060>; + ti,index-starts-at-one; + }; + + alt_ck: alt_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; + + mcbsp_clks: mcbsp_clks { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0x0>; + }; + + dpll_ck: dpll_ck { + #clock-cells = <0>; + compatible = "ti,omap2-dpll-core-clock"; + clocks = <&sys_ck>, <&sys_ck>; + reg = <0x0500>, <0x0540>; + }; + + apll96_ck: apll96_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + ti,idlest-shift = <8>; + ti,clock-frequency = <96000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + apll54_ck: apll54_ck { + #clock-cells = <0>; + compatible = "ti,omap2-apll-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <6>; + ti,idlest-shift = <9>; + ti,clock-frequency = <54000000>; + reg = <0x0500>, <0x0530>, <0x0520>; + }; + + func_54m_ck: func_54m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll54_ck>, <&alt_ck>; + ti,bit-shift = <5>; + reg = <0x0540>; + }; + + core_ck: core_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&dpll_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + func_96m_ck: func_96m_ck { + #clock-cells = <0>; + }; + + apll96_d2_ck: apll96_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&apll96_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + func_48m_ck: func_48m_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&apll96_d2_ck>, <&alt_ck>; + ti,bit-shift = <3>; + reg = <0x0540>; + }; + + func_12m_ck: func_12m_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&func_48m_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + sys_clkout_src_gate: sys_clkout_src_gate { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <7>; + reg = <0x0070>; + }; + + sys_clkout_src_mux: sys_clkout_src_mux { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_ck>, <&sys_ck>, <&func_96m_ck>, <&func_54m_ck>; + reg = <0x0070>; + }; + + sys_clkout_src: sys_clkout_src { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&sys_clkout_src_gate>, <&sys_clkout_src_mux>; + }; + + sys_clkout: sys_clkout { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&sys_clkout_src>; + ti,bit-shift = <3>; + ti,max-div = <64>; + reg = <0x0070>; + ti,index-power-of-two; + }; + + emul_ck: emul_ck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <0>; + reg = <0x0078>; + }; + + mpu_ck: mpu_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0140>; + ti,index-starts-at-one; + }; + + dsp_gate_fck: dsp_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0800>; + }; + + dsp_div_fck: dsp_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + reg = <0x0840>; + }; + + dsp_fck: dsp_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dsp_gate_fck>, <&dsp_div_fck>; + }; + + core_l3_ck: core_l3_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_ck>; + ti,max-div = <31>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + gfx_3d_gate_fck: gfx_3d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <2>; + reg = <0x0300>; + }; + + gfx_3d_div_fck: gfx_3d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_3d_fck: gfx_3d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_3d_gate_fck>, <&gfx_3d_div_fck>; + }; + + gfx_2d_gate_fck: gfx_2d_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <1>; + reg = <0x0300>; + }; + + gfx_2d_div_fck: gfx_2d_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,max-div = <4>; + reg = <0x0340>; + ti,index-starts-at-one; + }; + + gfx_2d_fck: gfx_2d_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gfx_2d_gate_fck>, <&gfx_2d_div_fck>; + }; + + gfx_ick: gfx_ick { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0310>; + }; + + l4_ck: l4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <5>; + ti,max-div = <3>; + reg = <0x0240>; + ti,index-starts-at-one; + }; + + dss_ick: dss_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x0210>; + }; + + dss1_gate_fck: dss1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <0>; + reg = <0x0200>; + }; + + core_d2_ck: core_d2_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <2>; + }; + + core_d3_ck: core_d3_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <3>; + }; + + core_d4_ck: core_d4_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <4>; + }; + + core_d5_ck: core_d5_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <5>; + }; + + core_d6_ck: core_d6_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <6>; + }; + + dummy_ck: dummy_ck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + core_d8_ck: core_d8_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <8>; + }; + + core_d9_ck: core_d9_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <9>; + }; + + core_d12_ck: core_d12_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <12>; + }; + + core_d16_ck: core_d16_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_ck>; + clock-mult = <1>; + clock-div = <16>; + }; + + dss1_mux_fck: dss1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&core_ck>, <&core_d2_ck>, <&core_d3_ck>, <&core_d4_ck>, <&core_d5_ck>, <&core_d6_ck>, <&core_d8_ck>, <&core_d9_ck>, <&core_d12_ck>, <&core_d16_ck>; + ti,bit-shift = <8>; + reg = <0x0240>; + }; + + dss1_fck: dss1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss1_gate_fck>, <&dss1_mux_fck>; + }; + + dss2_gate_fck: dss2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-no-wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <1>; + reg = <0x0200>; + }; + + dss2_mux_fck: dss2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&sys_ck>, <&func_48m_ck>; + ti,bit-shift = <13>; + reg = <0x0240>; + }; + + dss2_fck: dss2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&dss2_gate_fck>, <&dss2_mux_fck>; + }; + + dss_54m_fck: dss_54m_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_54m_ck>; + ti,bit-shift = <2>; + reg = <0x0200>; + }; + + ssi_ssr_sst_gate_fck: ssi_ssr_sst_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&core_ck>; + ti,bit-shift = <1>; + reg = <0x0204>; + }; + + ssi_ssr_sst_div_fck: ssi_ssr_sst_div_fck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_ck>; + ti,bit-shift = <20>; + reg = <0x0240>; + }; + + ssi_ssr_sst_fck: ssi_ssr_sst_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&ssi_ssr_sst_gate_fck>, <&ssi_ssr_sst_div_fck>; + }; + + usb_l4_gate_ick: usb_l4_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <0>; + reg = <0x0214>; + }; + + usb_l4_div_ick: usb_l4_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&core_l3_ck>; + ti,bit-shift = <25>; + reg = <0x0240>; + ti,dividers = <0>, <1>, <2>, <0>, <4>; + }; + + usb_l4_ick: usb_l4_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; + }; + + ssi_l4_ick: ssi_l4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x0214>; + }; + + gpt1_ick: gpt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <0>; + reg = <0x0410>; + }; + + gpt1_gate_fck: gpt1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <0>; + reg = <0x0400>; + }; + + gpt1_mux_fck: gpt1_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + reg = <0x0440>; + }; + + gpt1_fck: gpt1_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt1_gate_fck>, <&gpt1_mux_fck>; + }; + + gpt2_ick: gpt2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x0210>; + }; + + gpt2_gate_fck: gpt2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <4>; + reg = <0x0200>; + }; + + gpt2_mux_fck: gpt2_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <2>; + reg = <0x0244>; + }; + + gpt2_fck: gpt2_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt2_gate_fck>, <&gpt2_mux_fck>; + }; + + gpt3_ick: gpt3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <5>; + reg = <0x0210>; + }; + + gpt3_gate_fck: gpt3_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <5>; + reg = <0x0200>; + }; + + gpt3_mux_fck: gpt3_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <4>; + reg = <0x0244>; + }; + + gpt3_fck: gpt3_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt3_gate_fck>, <&gpt3_mux_fck>; + }; + + gpt4_ick: gpt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <6>; + reg = <0x0210>; + }; + + gpt4_gate_fck: gpt4_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <6>; + reg = <0x0200>; + }; + + gpt4_mux_fck: gpt4_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <6>; + reg = <0x0244>; + }; + + gpt4_fck: gpt4_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt4_gate_fck>, <&gpt4_mux_fck>; + }; + + gpt5_ick: gpt5_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <7>; + reg = <0x0210>; + }; + + gpt5_gate_fck: gpt5_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <7>; + reg = <0x0200>; + }; + + gpt5_mux_fck: gpt5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <8>; + reg = <0x0244>; + }; + + gpt5_fck: gpt5_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt5_gate_fck>, <&gpt5_mux_fck>; + }; + + gpt6_ick: gpt6_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <8>; + reg = <0x0210>; + }; + + gpt6_gate_fck: gpt6_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <8>; + reg = <0x0200>; + }; + + gpt6_mux_fck: gpt6_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <10>; + reg = <0x0244>; + }; + + gpt6_fck: gpt6_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt6_gate_fck>, <&gpt6_mux_fck>; + }; + + gpt7_ick: gpt7_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <9>; + reg = <0x0210>; + }; + + gpt7_gate_fck: gpt7_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <9>; + reg = <0x0200>; + }; + + gpt7_mux_fck: gpt7_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <12>; + reg = <0x0244>; + }; + + gpt7_fck: gpt7_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt7_gate_fck>, <&gpt7_mux_fck>; + }; + + gpt8_ick: gpt8_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <10>; + reg = <0x0210>; + }; + + gpt8_gate_fck: gpt8_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <10>; + reg = <0x0200>; + }; + + gpt8_mux_fck: gpt8_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <14>; + reg = <0x0244>; + }; + + gpt8_fck: gpt8_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt8_gate_fck>, <&gpt8_mux_fck>; + }; + + gpt9_ick: gpt9_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <11>; + reg = <0x0210>; + }; + + gpt9_gate_fck: gpt9_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <11>; + reg = <0x0200>; + }; + + gpt9_mux_fck: gpt9_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <16>; + reg = <0x0244>; + }; + + gpt9_fck: gpt9_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt9_gate_fck>, <&gpt9_mux_fck>; + }; + + gpt10_ick: gpt10_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <12>; + reg = <0x0210>; + }; + + gpt10_gate_fck: gpt10_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <12>; + reg = <0x0200>; + }; + + gpt10_mux_fck: gpt10_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <18>; + reg = <0x0244>; + }; + + gpt10_fck: gpt10_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt10_gate_fck>, <&gpt10_mux_fck>; + }; + + gpt11_ick: gpt11_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <13>; + reg = <0x0210>; + }; + + gpt11_gate_fck: gpt11_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <13>; + reg = <0x0200>; + }; + + gpt11_mux_fck: gpt11_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <20>; + reg = <0x0244>; + }; + + gpt11_fck: gpt11_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt11_gate_fck>, <&gpt11_mux_fck>; + }; + + gpt12_ick: gpt12_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <14>; + reg = <0x0210>; + }; + + gpt12_gate_fck: gpt12_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <14>; + reg = <0x0200>; + }; + + gpt12_mux_fck: gpt12_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&func_32k_ck>, <&sys_ck>, <&alt_ck>; + ti,bit-shift = <22>; + reg = <0x0244>; + }; + + gpt12_fck: gpt12_fck { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&gpt12_gate_fck>, <&gpt12_mux_fck>; + }; + + mcbsp1_ick: mcbsp1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <15>; + reg = <0x0210>; + }; + + mcbsp1_gate_fck: mcbsp1_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <15>; + reg = <0x0200>; + }; + + mcbsp2_ick: mcbsp2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <16>; + reg = <0x0210>; + }; + + mcbsp2_gate_fck: mcbsp2_gate_fck { + #clock-cells = <0>; + compatible = "ti,composite-gate-clock"; + clocks = <&mcbsp_clks>; + ti,bit-shift = <16>; + reg = <0x0200>; + }; + + mcspi1_ick: mcspi1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <17>; + reg = <0x0210>; + }; + + mcspi1_fck: mcspi1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <17>; + reg = <0x0200>; + }; + + mcspi2_ick: mcspi2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <18>; + reg = <0x0210>; + }; + + mcspi2_fck: mcspi2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <18>; + reg = <0x0200>; + }; + + uart1_ick: uart1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <21>; + reg = <0x0210>; + }; + + uart1_fck: uart1_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <21>; + reg = <0x0200>; + }; + + uart2_ick: uart2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <22>; + reg = <0x0210>; + }; + + uart2_fck: uart2_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <22>; + reg = <0x0200>; + }; + + uart3_ick: uart3_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x0214>; + }; + + uart3_fck: uart3_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <2>; + reg = <0x0204>; + }; + + gpios_ick: gpios_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <2>; + reg = <0x0410>; + }; + + gpios_fck: gpios_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <2>; + reg = <0x0400>; + }; + + mpu_wdt_ick: mpu_wdt_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <3>; + reg = <0x0410>; + }; + + mpu_wdt_fck: mpu_wdt_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <3>; + reg = <0x0400>; + }; + + sync_32k_ick: sync_32k_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <1>; + reg = <0x0410>; + }; + + wdt1_ick: wdt1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <4>; + reg = <0x0410>; + }; + + omapctrl_ick: omapctrl_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&sys_ck>; + ti,bit-shift = <5>; + reg = <0x0410>; + }; + + cam_fck: cam_fck { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <31>; + reg = <0x0200>; + }; + + cam_ick: cam_ick { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <31>; + reg = <0x0210>; + }; + + mailboxes_ick: mailboxes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <30>; + reg = <0x0210>; + }; + + wdt4_ick: wdt4_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <29>; + reg = <0x0210>; + }; + + wdt4_fck: wdt4_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_32k_ck>; + ti,bit-shift = <29>; + reg = <0x0200>; + }; + + mspro_ick: mspro_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <27>; + reg = <0x0210>; + }; + + mspro_fck: mspro_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_96m_ck>; + ti,bit-shift = <27>; + reg = <0x0200>; + }; + + fac_ick: fac_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <25>; + reg = <0x0210>; + }; + + fac_fck: fac_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <25>; + reg = <0x0200>; + }; + + hdq_ick: hdq_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <23>; + reg = <0x0210>; + }; + + hdq_fck: hdq_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_12m_ck>; + ti,bit-shift = <23>; + reg = <0x0200>; + }; + + i2c1_ick: i2c1_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <19>; + reg = <0x0210>; + }; + + i2c2_ick: i2c2_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <20>; + reg = <0x0210>; + }; + + gpmc_fck: gpmc_fck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <1>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdma_fck: sdma_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&core_l3_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + + sdma_ick: sdma_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <0>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + sdrc_ick: sdrc_ick { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&core_l3_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <2>; + reg = <0x0238>; + ti,clock-mult = <1>; + }; + + des_ick: des_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <0>; + reg = <0x021c>; + }; + + sha_ick: sha_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <1>; + reg = <0x021c>; + }; + + rng_ick: rng_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <2>; + reg = <0x021c>; + }; + + aes_ick: aes_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <3>; + reg = <0x021c>; + }; + + pka_ick: pka_ick { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&l4_ck>; + ti,bit-shift = <4>; + reg = <0x021c>; + }; + + usb_fck: usb_fck { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&func_48m_ck>; + ti,bit-shift = <0>; + reg = <0x0204>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad3736a..9cba94bed7ad 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -89,7 +89,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 0abe986a4ecc..476ff158ddb3 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -234,6 +234,10 @@ }; }; +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + &usb_otg_hs { pinctrl-names = "default"; pinctrl-0 = <&musb_pins>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index cc1dce6978f5..d97308896f0c 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -176,9 +176,6 @@ &omap3_pmx_core2 { pinctrl-names = "default"; - pinctrl-0 = < - &hsusb1_2_pins - >; hsusb1_2_pins: pinmux_hsusb1_2_pins { pinctrl-single,pins = < @@ -357,6 +354,10 @@ power = <50>; }; +&mcbsp2 { + status = "okay"; +}; + &gpmc { ranges = <0 0 0x30000000 0x1000000>, <7 0 0x15000000 0x01000000>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1a57b61f5e24..059a8ff1e6ac 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "omap34xx-hs.dtsi" +#include <dt-bindings/input/input.h> / { model = "Nokia N900"; @@ -21,6 +22,17 @@ }; }; + leds { + compatible = "gpio-leds"; + heartbeat { + label = "debug::sleep"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -90,6 +102,19 @@ }; }; }; + + sound: n900-audio { + compatible = "nokia,n900-audio"; + + nokia,cpu-dai = <&mcbsp2>; + nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>; + nokia,headphone-amplifier = <&tpa6130a2>; + + tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */ + jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */ + eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */ + speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>; + }; }; &omap3_pmx_core { @@ -130,6 +155,21 @@ >; }; + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */ + 0x160 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */ + 0x166 (PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ @@ -173,6 +213,37 @@ 0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */ >; }; + + wl1251_pins: pinmux_wl1251 { + pinctrl-single,pins = < + 0x0ce (PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */ + 0x05a (PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */ + >; + }; + + ssi_pins: pinmux_ssi { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */ + 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */ + 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */ + 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */ + 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */ + 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */ + 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */ + 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */ + >; + }; + + modem_pins: pinmux_modem { + pinctrl-single,pins = < + 0x0ac (PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */ + 0x0b0 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */ + 0x0b2 (PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */ + 0x0b4 (PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */ + 0x0b6 (PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */ + 0x15e (PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */ + >; + }; }; &i2c1 { @@ -283,57 +354,57 @@ }; &twl_keypad { - linux,keymap = < 0x00000010 /* KEY_Q */ - 0x00010018 /* KEY_O */ - 0x00020019 /* KEY_P */ - 0x00030033 /* KEY_COMMA */ - 0x0004000e /* KEY_BACKSPACE */ - 0x0006001e /* KEY_A */ - 0x0007001f /* KEY_S */ - - 0x01000011 /* KEY_W */ - 0x01010020 /* KEY_D */ - 0x01020021 /* KEY_F */ - 0x01030022 /* KEY_G */ - 0x01040023 /* KEY_H */ - 0x01050024 /* KEY_J */ - 0x01060025 /* KEY_K */ - 0x01070026 /* KEY_L */ - - 0x02000012 /* KEY_E */ - 0x02010034 /* KEY_DOT */ - 0x02020067 /* KEY_UP */ - 0x0203001c /* KEY_ENTER */ - 0x0205002c /* KEY_Z */ - 0x0206002d /* KEY_X */ - 0x0207002e /* KEY_C */ - 0x02080043 /* KEY_F9 */ - - 0x03000013 /* KEY_R */ - 0x0301002f /* KEY_V */ - 0x03020030 /* KEY_B */ - 0x03030031 /* KEY_N */ - 0x03040032 /* KEY_M */ - 0x03050039 /* KEY_SPACE */ - 0x03060039 /* KEY_SPACE */ - 0x03070069 /* KEY_LEFT */ - - 0x04000014 /* KEY_T */ - 0x0401006c /* KEY_DOWN */ - 0x0402006a /* KEY_RIGHT */ - 0x0404001d /* KEY_LEFTCTRL */ - 0x04050064 /* KEY_RIGHTALT */ - 0x0406002a /* KEY_LEFTSHIFT */ - 0x04080044 /* KEY_F10 */ - - 0x05000015 /* KEY_Y */ - 0x05080057 /* KEY_F11 */ - - 0x06000016 /* KEY_U */ - - 0x07000017 /* KEY_I */ - 0x07010041 /* KEY_F7 */ - 0x07020042 /* KEY_F8 */ + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q) + MATRIX_KEY(0x00, 0x01, KEY_O) + MATRIX_KEY(0x00, 0x02, KEY_P) + MATRIX_KEY(0x00, 0x03, KEY_COMMA) + MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE) + MATRIX_KEY(0x00, 0x06, KEY_A) + MATRIX_KEY(0x00, 0x07, KEY_S) + + MATRIX_KEY(0x01, 0x00, KEY_W) + MATRIX_KEY(0x01, 0x01, KEY_D) + MATRIX_KEY(0x01, 0x02, KEY_F) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_H) + MATRIX_KEY(0x01, 0x05, KEY_J) + MATRIX_KEY(0x01, 0x06, KEY_K) + MATRIX_KEY(0x01, 0x07, KEY_L) + + MATRIX_KEY(0x02, 0x00, KEY_E) + MATRIX_KEY(0x02, 0x01, KEY_DOT) + MATRIX_KEY(0x02, 0x02, KEY_UP) + MATRIX_KEY(0x02, 0x03, KEY_ENTER) + MATRIX_KEY(0x02, 0x05, KEY_Z) + MATRIX_KEY(0x02, 0x06, KEY_X) + MATRIX_KEY(0x02, 0x07, KEY_C) + MATRIX_KEY(0x02, 0x08, KEY_F9) + + MATRIX_KEY(0x03, 0x00, KEY_R) + MATRIX_KEY(0x03, 0x01, KEY_V) + MATRIX_KEY(0x03, 0x02, KEY_B) + MATRIX_KEY(0x03, 0x03, KEY_N) + MATRIX_KEY(0x03, 0x04, KEY_M) + MATRIX_KEY(0x03, 0x05, KEY_SPACE) + MATRIX_KEY(0x03, 0x06, KEY_SPACE) + MATRIX_KEY(0x03, 0x07, KEY_LEFT) + + MATRIX_KEY(0x04, 0x00, KEY_T) + MATRIX_KEY(0x04, 0x01, KEY_DOWN) + MATRIX_KEY(0x04, 0x02, KEY_RIGHT) + MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL) + MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT) + MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT) + MATRIX_KEY(0x04, 0x08, KEY_F10) + + MATRIX_KEY(0x05, 0x00, KEY_Y) + MATRIX_KEY(0x05, 0x08, KEY_F11) + + MATRIX_KEY(0x06, 0x00, KEY_U) + + MATRIX_KEY(0x07, 0x00, KEY_I) + MATRIX_KEY(0x07, 0x01, KEY_F7) + MATRIX_KEY(0x07, 0x02, KEY_F8) >; }; @@ -604,6 +675,30 @@ }; }; +&mcspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; + + wl1251@0 { + pinctrl-names = "default"; + pinctrl-0 = <&wl1251_pins>; + + vio-supply = <&vio>; + + compatible = "ti,wl1251"; + reg = <0>; + spi-max-frequency = <48000000>; + + spi-cpol; + spi-cpha; + + ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */ + + interrupt-parent = <&gpio2>; + interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */ + }; +}; + &usb_otg_hs { interface-type = <0>; usb-phy = <&usb2_phy>; @@ -618,11 +713,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; @@ -662,3 +759,48 @@ }; }; }; + +&mcbsp2 { + status = "ok"; +}; + +&ssi_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&ssi_pins>; + + ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */ + + modem: hsi-client { + compatible = "nokia,n900-modem"; + + pinctrl-names = "default"; + pinctrl-0 = <&modem_pins>; + + hsi-channel-ids = <0>, <1>, <2>, <3>; + hsi-channel-names = "mcsaab-control", + "speech-control", + "speech-data", + "mcsaab-data"; + hsi-speed-kbps = <55000>; + hsi-mode = "frame"; + hsi-flow = "synchronized"; + hsi-arb-mode = "round-robin"; + + interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */ + + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */ + <&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */ + <&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */ + <&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */ + <&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */ + gpio-names = "cmt_apeslpx", + "cmt_rst_rq", + "cmt_en", + "cmt_rst", + "cmt_bsi"; + }; +}; + +&ssi_port2 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 5c26c184f2c1..70addcba37c5 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -67,6 +67,20 @@ ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ }; +/* CSI-2 receiver */ +&vaux2 { + regulator-name = "vaux2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +/* Cameras */ +&vaux3 { + regulator-name = "vaux3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &i2c2 { clock-frequency = <400000>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4231191ade06..b2891a9a6975 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -267,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -277,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -287,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; @@ -757,6 +757,51 @@ clock-names = "fck"; }; }; + + ssi: ssi-controller@48058000 { + compatible = "ti,omap3-ssi"; + ti,hwmods = "ssi"; + + status = "disabled"; + + reg = <0x48058000 0x1000>, + <0x48059000 0x1000>; + reg-names = "sys", + "gdd"; + + interrupts = <71>; + interrupt-names = "gdd_mpu"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ssi_port1: ssi-port@4805a000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805a000 0x800>, + <0x4805a800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <67>, + <68>; + }; + + ssi_port2: ssi-port@4805b000 { + compatible = "ti,omap3-ssi-port"; + + reg = <0x4805b000 0x800>, + <0x4805b800 0x800>; + reg-names = "tx", + "rx"; + + interrupt-parent = <&intc>; + interrupts = <69>, + <70>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi index 2e92360da1f3..3819c1e91591 100644 --- a/arch/arm/boot/dts/omap34xx.dtsi +++ b/arch/arm/boot/dts/omap34xx.dtsi @@ -40,6 +40,17 @@ }; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap36xx-clocks.dtsi b/arch/arm/boot/dts/omap36xx-clocks.dtsi index 6b5280d04a0e..200ae3a5cbbb 100644 --- a/arch/arm/boot/dts/omap36xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi @@ -83,7 +83,7 @@ }; &dpll4_m5x2_mul_ck { - clock-mult = <1>; + ti,clock-mult = <1>; }; &dpll4_m6x2_mul_ck { diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi index 22cf4647087e..541704a59a5a 100644 --- a/arch/arm/boot/dts/omap36xx.dtsi +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -78,6 +78,17 @@ clock-names = "fck", "tv_dac_clk"; }; +&ssi { + status = "ok"; + + clocks = <&ssi_ssr_fck>, + <&ssi_sst_fck>, + <&ssi_ick>; + clock-names = "ssi_ssr_fck", + "ssi_sst_fck", + "ssi_ick"; +}; + /include/ "omap34xx-omap36xx-clocks.dtsi" /include/ "omap36xx-omap3430es2plus-clocks.dtsi" /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi index 12be2b35dae9..e47ff69dcf70 100644 --- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi +++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi @@ -453,10 +453,11 @@ dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck { #clock-cells = <0>; - compatible = "fixed-factor-clock"; + compatible = "ti,fixed-factor-clock"; clocks = <&dpll4_m5_ck>; - clock-mult = <2>; - clock-div = <1>; + ti,clock-mult = <2>; + ti,clock-div = <1>; + ti,set-rate-parent; }; dpll4_m5x2_ck: dpll4_m5x2_ck { diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 96f51d870812..cd53a64d8f2e 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -46,35 +46,35 @@ led_pins: pinmux_led_pins { pinctrl-single,pins = < - 0xd6 (PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ >; }; button_pins: pinmux_button_pins { pinctrl-single,pins = < - 0xd4 (PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ + OMAP4_IOPAD(0x114, PIN_INPUT_PULLUP | MUX_MODE3) /* abe_dmic_din2.gpio_121 */ >; }; i2c2_pins: pinmux_i2c2_pins { pinctrl-single,pins = < - 0xe6 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ - 0xe8 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0xea (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ - 0xec (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ >; }; smsc_pins: pinmux_smsc_pins { pinctrl-single,pins = < - 0x28 (PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ - 0x2a (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ - 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ + OMAP4_IOPAD(0x068, PIN_INPUT | MUX_MODE3) /* gpmc_a20.gpio_44: IRQ */ + OMAP4_IOPAD(0x06a, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a21.gpio_45: nReset */ + OMAP4_IOPAD(0x070, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ >; }; }; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index a514791154eb..e860ccd9d09c 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -67,100 +67,98 @@ pinctrl-names = "default"; pinctrl-0 = < &twl6040_pins - &mcpdm_pins - &mcbsp1_pins &hsusbb1_pins >; twl6040_pins: pinmux_twl6040_pins { pinctrl-single,pins = < - 0x126 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ - 0x160 (PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ >; }; mcpdm_pins: pinmux_mcpdm_pins { pinctrl-single,pins = < - 0xc6 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ - 0xc8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ - 0xca (PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ - 0xcc (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ - 0xce (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ >; }; mcbsp1_pins: pinmux_mcbsp1_pins { pinctrl-single,pins = < - 0xbe (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ - 0xc0 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ - 0xc2 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ - 0xc4 (PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ + OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ + OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ + OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ + OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */ >; }; hsusbb1_pins: pinmux_hsusbb1_pins { pinctrl-single,pins = < - 0x82 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ - 0x84 (PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ - 0x86 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ - 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ - 0x8a (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ - 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ - 0x8e (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ - 0x90 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ - 0x92 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ - 0x94 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ - 0x96 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ - 0x98 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ >; }; hsusb1phy_pins: pinmux_hsusb1phy_pins { pinctrl-single,pins = < - 0x4c (PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ + OMAP4_IOPAD(0x08c, PIN_OUTPUT | MUX_MODE3) /* gpmc_wait1.gpio_62 */ >; }; w2cbw0015_pins: pinmux_w2cbw0015_pins { pinctrl-single,pins = < - 0x26 (PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ - 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0xe2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0xe4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ >; }; i2c4_pins: pinmux_i2c4_pins { pinctrl-single,pins = < - 0xee (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ - 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0xa2 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ - 0xa4 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ - 0xa6 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ - 0xa8 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ - 0xaa (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ - 0xac (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */ >; }; mmc5_pins: pinmux_mmc5_pins { pinctrl-single,pins = < - 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmcc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3 */ >; }; }; @@ -202,6 +200,18 @@ clock-frequency = <400000>; }; +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index d2c45bfaaa2c..8cfa3c8a72b0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -481,6 +481,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 48983c8d56c2..3e1da43068f6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -570,16 +570,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4-var-dvk-om44.dts b/arch/arm/boot/dts/omap4-var-dvk-om44.dts new file mode 100644 index 000000000000..458d79fa378b --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-dvk-om44.dts @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-DVK-OM44"; + compatible = "variscite,var-dvk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + + lcd0: display { + compatible = "innolux,at070tn83", "panel-dpi"; + label = "lcd"; + panel-timing { + clock-frequency = <33333333>; + + hback-porch = <40>; + hactive = <800>; + hfront-porch = <40>; + hsync-len = <48>; + + vback-porch = <29>; + vactive = <480>; + vfront-porch = <13>; + vsync-len = <3>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + + gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio 122 */ + }; +}; + +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&dss_dpi_pins>; + + port { + dpi_out: endpoint { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&dsi2 { + status = "okay"; + vdd-supply = <&vcxio>; +}; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi new file mode 100644 index 000000000000..f2d2fdb75628 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -0,0 +1,235 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_led_pins>; + + led0 { + label = "var:green:led0"; + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio 173 */ + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "var:green:led1"; + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; /* gpio 172 */ + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins>; + #address-cells = <1>; + #size-cells = <0>; + + user-key@184 { + label = "user"; + gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; /* gpio 184 */ + linux,code = <BTN_EXTRA>; + gpio-key,wakeup; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_pins>; + label = "hdmi"; + type = "a"; + + hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; /* gpio_63 */ + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; +}; + +&omap4_pmx_core { + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi1_cs2.uart1_cts */ + OMAP4_IOPAD(0x13e, PIN_OUTPUT | MUX_MODE1) /* mcspi1_cs3.uart1_rts */ + OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE1) /* i2c2_scl.uart1_rx */ + OMAP4_IOPAD(0x128, PIN_OUTPUT | MUX_MODE1) /* i2c2_sda.uart1_tx */ + >; + }; + + mcspi1_pins: pinmux_mcspi1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */ + OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ + OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ + OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + >; + }; + + mcasp_pins: pinmux_mcsasp_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f8, PIN_OUTPUT | MUX_MODE2) /* mcbsp2_dr.abe_mcasp_axr */ + >; + }; + + dss_dpi_pins: pinmux_dss_dpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x162, PIN_OUTPUT | MUX_MODE5) /* dispc2_data23 */ + OMAP4_IOPAD(0x164, PIN_OUTPUT | MUX_MODE5) /* dispc2_data22 */ + OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE5) /* dispc2_data21 */ + OMAP4_IOPAD(0x168, PIN_OUTPUT | MUX_MODE5) /* dispc2_data20 */ + OMAP4_IOPAD(0x16a, PIN_OUTPUT | MUX_MODE5) /* dispc2_data19 */ + OMAP4_IOPAD(0x16c, PIN_OUTPUT | MUX_MODE5) /* dispc2_data18 */ + OMAP4_IOPAD(0x16e, PIN_OUTPUT | MUX_MODE5) /* dispc2_data15 */ + OMAP4_IOPAD(0x170, PIN_OUTPUT | MUX_MODE5) /* dispc2_data14 */ + OMAP4_IOPAD(0x172, PIN_OUTPUT | MUX_MODE5) /* dispc2_data13 */ + OMAP4_IOPAD(0x174, PIN_OUTPUT | MUX_MODE5) /* dispc2_data12 */ + OMAP4_IOPAD(0x176, PIN_OUTPUT | MUX_MODE5) /* dispc2_data11 */ + OMAP4_IOPAD(0x1b4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data10 */ + OMAP4_IOPAD(0x1b6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data9 */ + OMAP4_IOPAD(0x1b8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data16 */ + OMAP4_IOPAD(0x1ba, PIN_OUTPUT | MUX_MODE5) /* dispc2_data17 */ + OMAP4_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE5) /* dispc2_hsync */ + OMAP4_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE5) /* dispc2_pclk */ + OMAP4_IOPAD(0x1c0, PIN_OUTPUT | MUX_MODE5) /* dispc2_vsync */ + OMAP4_IOPAD(0x1c2, PIN_OUTPUT | MUX_MODE5) /* dispc2_de */ + OMAP4_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data8 */ + OMAP4_IOPAD(0x1c6, PIN_OUTPUT | MUX_MODE5) /* dispc2_data7 */ + OMAP4_IOPAD(0x1c8, PIN_OUTPUT | MUX_MODE5) /* dispc2_data6 */ + OMAP4_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE5) /* dispc2_data5 */ + OMAP4_IOPAD(0x1cc, PIN_OUTPUT | MUX_MODE5) /* dispc2_data4 */ + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE5) /* dispc2_data3 */ + OMAP4_IOPAD(0x1d0, PIN_OUTPUT | MUX_MODE5) /* dispc2_data2 */ + OMAP4_IOPAD(0x1d2, PIN_OUTPUT | MUX_MODE5) /* dispc2_data1 */ + OMAP4_IOPAD(0x1d4, PIN_OUTPUT | MUX_MODE5) /* dispc2_data0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */ + OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */ + >; + }; + + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc5_pins: pinmux_mmc5_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE3) /* abe_mcbsp2_clkx.gpio_110 */ + OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ + >; + }; + + gpio_led_pins: pinmux_gpio_led_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17e, PIN_OUTPUT | MUX_MODE3) /* kpd_col4.gpio_172 */ + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) /* kpd_col5.gpio_173 */ + >; + }; + + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1a2, PIN_INPUT | MUX_MODE3) /* sys_boot0.gpio_184 */ + >; + }; + + ks8851_irq_pins: pinmux_ks8851_irq_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x17c, PIN_INPUT_PULLUP | MUX_MODE3) /* kpd_col3.gpio_171 */ + >; + }; + + hdmi_hpd_pins: pinmux_hdmi_hpd_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */ + >; + }; + + backlight_pins: pinmux_backlight_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x116, PIN_OUTPUT | MUX_MODE3) /* abe_dmic_din3.gpio_122 */ + >; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; + +&mcspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi1_pins>; + status = "okay"; + + eth@0 { + compatible = "ks8851"; + pinctrl-names = "default"; + pinctrl-0 = <&ks8851_irq_pins>; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio 171 */ + }; +}; + +&mmc5 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc5_pins>; + vmmc-supply = <&vbat>; + bus-width = <4>; + cd-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio 110 */ + status = "okay"; +}; + +&dss { + status = "okay"; +}; + +&hdmi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + vdda-supply = <&vdac>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi new file mode 100644 index 000000000000..cc66af419236 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -0,0 +1,68 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + /* regulator for wl12xx on sdio4 */ + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_ctrl_pins>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio2 11 0>; /* gpio 43 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */ + OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + wl12xx_ctrl_pins: pinmux_wl12xx_ctrl_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x062, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a17.gpio_41 (WLAN_IRQ) */ + OMAP4_IOPAD(0x064, PIN_OUTPUT | MUX_MODE3) /* gpmc_a18.gpio_42 (BT_EN) */ + OMAP4_IOPAD(0x066, PIN_OUTPUT | MUX_MODE3) /* gpmc_a19.gpio_43 (WLAN_EN) */ + >; + }; + + mmc4_pins: pinmux_mmc4_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x154, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_clk.sdmmc4_clk */ + OMAP4_IOPAD(0x156, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_simo.sdmmc4_cmd */ + OMAP4_IOPAD(0x158, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_somi.sdmmc4_dat0 */ + OMAP4_IOPAD(0x15e, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_tx.sdmmc4_dat1 */ + OMAP4_IOPAD(0x15c, PIN_INPUT_PULLUP | MUX_MODE1) /* uart4_rx.sdmmc4_dat2 */ + OMAP4_IOPAD(0x15a, PIN_INPUT_PULLUP | MUX_MODE1) /* mcspi4_cs0.sdmmc4_dat3 */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&mmc4 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc4_pins>; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi new file mode 100644 index 000000000000..062701e1a898 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap4460.dtsi" + +/ { + model = "Variscite VAR-SOM-OM44"; + compatible = "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + sound: sound@0 { + compatible = "ti,abe-twl6040"; + ti,model = "VAR-SOM-OM44"; + + ti,mclk-freq = <38400000>; + ti,mcpdm = <&mcpdm>; + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "AFML", "Line In", + "AFMR", "Line In"; + }; + + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_phy_clk_pins + &hsusbb1_phy_rst_pins + >; + + reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */ + vcc-supply = <&vbat>; + + clocks = <&auxclk3_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + vbat: fixedregulator-vbat { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x19c, PIN_OUTPUT | MUX_MODE3) /* fref_clk2_out.gpio_182 */ + OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_ul_data.abe_pdm_ul_data */ + OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_dl_data.abe_pdm_dl_data */ + OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) /* abe_pdm_frame.abe_pdm_frame */ + OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_pdm_lb_clk.abe_pdm_lb_clk */ + OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + >; + }; + + tsc2004_pins: pinmux_tsc2004_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x090, PIN_INPUT | MUX_MODE3) /* gpmc_ncs4.gpio_101 (irq) */ + OMAP4_IOPAD(0x092, PIN_OUTPUT | MUX_MODE3) /* gpmc_ncs5.gpio_102 (rst) */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + hsusbb1_pins: pinmux_hsusbb1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0c2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_clk.usbb1_ulpiphy_clk */ + OMAP4_IOPAD(0x0c4, PIN_OUTPUT | MUX_MODE4) /* usbb1_ulpitll_stp.usbb1_ulpiphy_stp */ + OMAP4_IOPAD(0x0c6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dir.usbb1_ulpiphy_dir */ + OMAP4_IOPAD(0x0c8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_nxt.usbb1_ulpiphy_nxt */ + OMAP4_IOPAD(0x0ca, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat0.usbb1_ulpiphy_dat0 */ + OMAP4_IOPAD(0x0cc, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat1.usbb1_ulpiphy_dat1 */ + OMAP4_IOPAD(0x0ce, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat2.usbb1_ulpiphy_dat2 */ + OMAP4_IOPAD(0x0d0, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat3.usbb1_ulpiphy_dat3 */ + OMAP4_IOPAD(0x0d2, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat4.usbb1_ulpiphy_dat4 */ + OMAP4_IOPAD(0x0d4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat5.usbb1_ulpiphy_dat5 */ + OMAP4_IOPAD(0x0d6, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat6.usbb1_ulpiphy_dat6 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT_PULLDOWN | MUX_MODE4) /* usbb1_ulpitll_dat7.usbb1_ulpiphy_dat7 */ + >; + }; + + hsusbb1_phy_rst_pins: pinmux_hsusbb1_phy_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_OUTPUT | MUX_MODE3) /* kpd_row2.gpio_177 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&omap4_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &hsusbb1_hub_rst_pins + &lan7500_rst_pins + >; + + hsusbb1_phy_clk_pins: pinmux_hsusbb1_phy_clk_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x058, PIN_OUTPUT | MUX_MODE0) /* fref_clk3_out */ + >; + }; + + hsusbb1_hub_rst_pins: pinmux_hsusbb1_hub_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x042, PIN_OUTPUT | MUX_MODE3) /* gpio_wk1 */ + >; + }; + + lan7500_rst_pins: pinmux_lan7500_rst_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT | MUX_MODE3) /* gpio_wk0 */ + >; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +#include "twl6030.dtsi" +#include "twl6030_omap4.dtsi" + +&vusim { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + + clock-frequency = <400000>; + + touchscreen: tsc2004@48 { + compatible = "ti,tsc2004"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&tsc2004_pins>; + interrupt-parent = <&gpio4>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; /* gpio 101 */ + status = "disabled"; + }; + + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; + + eeprom@50 { + compatible = "microchip,24c32"; + reg = <0x50>; + }; +}; + +&i2c4 { + status = "disabled"; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&gpmc { + status = "disabled"; +}; + +&mcspi1 { + status = "disabled"; +}; + +&mcspi2 { + status = "disabled"; +}; + +&mcspi3 { + status = "disabled"; +}; + +&mcspi4 { + status = "disabled"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc>; + bus-width = <4>; + ti,non-removable; + status = "okay"; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&uart1 { + status = "disabled"; +}; + +&uart2 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "okay"; +}; + +&uart4 { + status = "disabled"; +}; + +&keypad { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; + +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; + +&usbhshost { + port1-mode = "ehci-phy"; +}; + +&usbhsehci { + phys = <&hsusb1_phy>; +}; diff --git a/arch/arm/boot/dts/omap4-var-som.dts b/arch/arm/boot/dts/omap4-var-som.dts deleted file mode 100644 index b41269e871dd..000000000000 --- a/arch/arm/boot/dts/omap4-var-som.dts +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -/dts-v1/; - -#include "omap443x.dtsi" - -/ { - model = "Variscite OMAP4 SOM"; - compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - vdd_eth: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "VDD_ETH"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - regulator-boot-on; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; -}; - -#include "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * Temperature Sensor - * http://www.ti.com/lit/ds/symlink/tmp105.pdf - */ - tmp105@49 { - compatible = "ti,tmp105"; - reg = <0x49>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mcspi1 { - eth@0 { - compatible = "ks8851"; - spi-max-frequency = <24000000>; - reg = <0>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* gpio line 171 */ - vdd-supply = <&vdd_eth>; - }; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - ti,bus-width = <8>; - ti,non-removable; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,bus-width = <4>; -}; diff --git a/arch/arm/boot/dts/omap4-var-stk-om44.dts b/arch/arm/boot/dts/omap4-var-stk-om44.dts new file mode 100644 index 000000000000..56b64e618608 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var-stk-om44.dts @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap4-var-som-om44.dtsi" +#include "omap4-var-som-om44-wlan.dtsi" +#include "omap4-var-om44customboard.dtsi" + +/ { + model = "Variscite VAR-STK-OM44"; + compatible = "variscite,var-stk-om44", "variscite,var-som-om44", "ti,omap4460", "ti,omap4"; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 649b5cd38b40..43a587e097d4 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -67,6 +67,7 @@ local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; + clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -311,7 +312,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -319,7 +320,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -327,7 +328,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; @@ -642,6 +643,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>; + clock-names = "wkupclk"; #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts new file mode 100644 index 000000000000..b8698ca68647 --- /dev/null +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -0,0 +1,413 @@ +/* + * Support for CompuLab CM-T54 + */ +/dts-v1/; + +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "CompuLab CM-T54"; + compatible = "compulab,omap5-cm-t54", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7F000000>; /* 2048 MB */ + }; + + vmmcsd_fixed: fixed-regulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vwlan_pdn_fixed: fixed-regulator-vwlan-pdn { + compatible = "regulator-fixed"; + regulator-name = "vwlan_pdn_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&ldo2_reg>; + gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* gpio4_109 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + vwlan_fixed: fixed-regulator-vwlan { + compatible = "regulator-fixed"; + regulator-name = "vwlan_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vwlan_pdn_fixed>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; /* gpio4_110 */ + startup-delay-us = <1000>; + enable-active-high; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */ + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "Heartbeat"; + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 ACT_LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &led_gpio_pins + &usbhost_pins + >; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00b0, PIN_OUTPUT | MUX_MODE6) /* hsi2_caflag.gpio3_80 */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01f2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_scl */ + OMAP5_IOPAD(0x01f4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_pmic_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */ + OMAP5_IOPAD(0x01e4, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_cmd */ + OMAP5_IOPAD(0x01e6, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data2 */ + OMAP5_IOPAD(0x01e8, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data3 */ + OMAP5_IOPAD(0x01ea, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data0 */ + OMAP5_IOPAD(0x01ec, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_data1 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0040, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_clk */ + OMAP5_IOPAD(0x0042, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_cmd */ + OMAP5_IOPAD(0x0044, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data0 */ + OMAP5_IOPAD(0x0046, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data1 */ + OMAP5_IOPAD(0x0048, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data2 */ + OMAP5_IOPAD(0x004a, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data3 */ + OMAP5_IOPAD(0x004c, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data4 */ + OMAP5_IOPAD(0x004e, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data5 */ + OMAP5_IOPAD(0x0050, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data6 */ + OMAP5_IOPAD(0x0052, PIN_INPUT_PULLUP | MUX_MODE0) /* emmc_data7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_gpios_pins: pinmux_wlan_gpios_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */ + OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + OMAP5_IOPAD(0x00c6, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + OMAP5_IOPAD(0x01dc, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + OMAP5_IOPAD(0x01de, PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + OMAP5_IOPAD(0x00a8, PIN_OUTPUT | MUX_MODE6) /* hsi2_caready.gpio3_76 */ + OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc3_pins + &wlan_gpios_pins + >; + vmmc-supply = <&vwlan_fixed>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + interrupt-parent = <&gic>; + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + ti,smps-range = <0x80>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VDD_3V3_WLAN */ + regulator-name = "ldo2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <1000>; + }; + + ldo3_reg: ldo3 { + /* VCC_1V5_AUD */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; diff --git a/arch/arm/boot/dts/omap5-sbc-t54.dts b/arch/arm/boot/dts/omap5-sbc-t54.dts new file mode 100644 index 000000000000..aa98fea3f2b3 --- /dev/null +++ b/arch/arm/boot/dts/omap5-sbc-t54.dts @@ -0,0 +1,51 @@ +/* + * Suppport for CompuLab SBC-T54 with CM-T54 + */ + +#include "omap5-cm-t54.dts" + +/ { + model = "CompuLab SBC-T54 with CM-T54"; + compatible = "compulab,omap5-sbc-t54", "compulab,omap5-cm-t54", "ti,omap5"; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x00f8, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x00fa, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ + >; + }; + + mmc1_aux_pins: pinmux_mmc1_aux_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */ + OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = < + &mmc1_pins + &mmc1_aux_pins + >; + cd-inverted; + wp-inverted; + cd-gpios = <&gpio8 4 GPIO_ACTIVE_LOW>; /* gpio8_228 */ + wp-gpios = <&gpio8 5 GPIO_ACTIVE_LOW>; /* gpio8_229 */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + clock-frequency = <400000>; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 36b4312a5e0d..e58be57984ab 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -82,6 +82,12 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>; }; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -810,6 +816,8 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; @@ -876,6 +884,46 @@ #thermal-sensor-cells = <1>; }; + + omap_control_sata: control-phy@4a002374 { + compatible = "ti,control-phy-pipe3"; + reg = <0x4a002374 0x4>; + reg-names = "power"; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + }; + + /* OCP2SCP3 */ + ocp2scp@4a090000 { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4a090000 0x20>; + ranges; + ti,hwmods = "ocp2scp3"; + sata_phy: phy@4a096000 { + compatible = "ti,phy-pipe3-sata"; + reg = <0x4A096000 0x80>, /* phy_rx */ + <0x4A096400 0x64>, /* phy_tx */ + <0x4A096800 0x40>; /* pll_ctrl */ + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_sata>; + clocks = <&sys_clkin>; + clock-names = "sysclk"; + #phy-cells = <0>; + }; + }; + + sata: sata@4a141100 { + compatible = "snps,dwc-ahci"; + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&sata_ref_clk>; + ti,hwmods = "sata"; + }; + }; }; diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index d487fdab3921..aeb142ce8e9d 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -120,10 +120,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; abe_24m_fclk: abe_24m_fclk { @@ -145,10 +143,11 @@ abe_iclk: abe_iclk { #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&abe_clk>; - clock-mult = <1>; - clock-div = <2>; + compatible = "ti,divider-clock"; + clocks = <&aess_fclk>; + ti,bit-shift = <24>; + reg = <0x0528>; + ti,dividers = <2>, <1>; }; abe_lp_clk_div: abe_lp_clk_div { @@ -164,10 +163,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_abe_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x01f4>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_ck: dpll_core_ck { @@ -188,10 +185,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; c2c_fclk: c2c_fclk { @@ -215,10 +210,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0138>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h12x2_ck: dpll_core_h12x2_ck { @@ -226,10 +219,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x013c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h13x2_ck: dpll_core_h13x2_ck { @@ -237,10 +228,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0140>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h14x2_ck: dpll_core_h14x2_ck { @@ -248,10 +237,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0144>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h22x2_ck: dpll_core_h22x2_ck { @@ -259,10 +246,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h23x2_ck: dpll_core_h23x2_ck { @@ -270,10 +255,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_h24x2_ck: dpll_core_h24x2_ck { @@ -281,10 +264,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m2_ck: dpll_core_m2_ck { @@ -292,10 +273,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0130>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_core_m3x2_ck: dpll_core_m3x2_ck { @@ -303,10 +282,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0134>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { @@ -335,10 +312,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01b8>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_iva_h12x2_ck: dpll_iva_h12x2_ck { @@ -346,10 +321,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_iva_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x01bc>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { @@ -372,10 +345,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0170>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; per_dpll_hs_clk_div: per_dpll_hs_clk_div { @@ -642,10 +613,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0158>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h12x2_ck: dpll_per_h12x2_ck { @@ -653,10 +622,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x015c>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_h14x2_ck: dpll_per_h14x2_ck { @@ -664,10 +631,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <63>; - ti,autoidle-shift = <8>; reg = <0x0164>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2_ck: dpll_per_m2_ck { @@ -675,10 +640,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m2x2_ck: dpll_per_m2x2_ck { @@ -686,10 +649,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0150>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_per_m3x2_ck: dpll_per_m3x2_ck { @@ -697,10 +658,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_per_x2_ck>; ti,max-div = <31>; - ti,autoidle-shift = <8>; reg = <0x0154>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro1_ck: dpll_unipro1_ck { @@ -723,10 +682,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro1_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0210>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_unipro2_ck: dpll_unipro2_ck { @@ -749,10 +706,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_unipro2_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x01d0>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; dpll_usb_ck: dpll_usb_ck { @@ -775,10 +730,8 @@ compatible = "ti,divider-clock"; clocks = <&dpll_usb_ck>; ti,max-div = <127>; - ti,autoidle-shift = <8>; reg = <0x0190>; ti,index-starts-at-one; - ti,invert-autoidle-bit; }; func_128m_clk: func_128m_clk { @@ -851,6 +804,7 @@ clocks = <&dpll_per_h12x2_ck>; ti,bit-shift = <8>; reg = <0x1420>; + ti,set-rate-parent; }; dss_sys_clk: dss_sys_clk { diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts new file mode 100644 index 000000000000..c701e8d16bbb --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "LaCie d2 Network"; + compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + front_button { + label = "Front Push Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_on { + label = "Power rocker switch (on|auto)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_off { + label = "Power rocker switch (auto|off)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372b"; + reg = <0x32>; + }; + + fan@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + + /* Not enough HW info */ + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>; + pinctrl-names = "default"; + + pmx_board_id: pmx-board-id { + marvell,pins = "mpp0", "mpp1", "mpp2"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp8", "mpp9", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_fan_fail: pmx-fan-fail { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + /* + * MPP6: Red front LED + * MPP16: Blue front LED blink control + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp6", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5ed6c1376901..89ff404a528c 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -6,8 +6,19 @@ * warranty of any kind, whether express or implied. */ +/* + * TODO: add Orion USB device port init when kernel.org support is added. + * TODO: add flash write support: see below. + * TODO: add power-off support. + * TODO: add I2C EEPROM support. + */ + /dts-v1/; -/include/ "orion5x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" / { model = "LaCie Ethernet Disk mini V2"; @@ -19,49 +30,84 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <166666667>; - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_power_button>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power-on Switch"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio0 18 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led>; + pinctrl-names = "default"; led@1 { label = "power:blue"; - gpios = <&gpio0 16 1>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; -&mdio { +&devbus_bootcs { status = "okay"; - ethphy: ethernet-phy { - reg = <8>; + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; }; }; +&ehci0 { + status = "okay"; +}; + ð { status = "okay"; @@ -69,3 +115,60 @@ phy-handle = <ðphy>; }; }; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>; + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_power_led_ctrl: pmx-power-led-ctrl { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi new file mode 100644 index 000000000000..d1ed71c60209 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "orion5x.dtsi" + +/ { + compatible = "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + compatible = "marvell,orion5x-88f5182-mbus", "simple-bus"; + + internal-regs { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f5182-pinctrl"; + reg = <0x10000 0x8>, <0x10050 0x4>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12", "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13", "mpp15"; + marvell,function = "sata1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,mv88f5182-core-clock"; + reg = <0x10010 0x4>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x1500 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts new file mode 100644 index 000000000000..6fb052507b36 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Marvell Reference Design 88F5182 NAS"; + compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>, + <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_debug_led>; + pinctrl-names = "default"; + + led@0 { + label = "rd88f5182:cpu"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + }; +}; + +&devbus_cs1 { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <1>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios + &pmx_pci_gpios>; + pinctrl-names = "default"; + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + pmx_debug_led: pmx-debug_led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_misc_gpios: pmx-misc-gpios { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..75cd01bd6024 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,7 +6,9 @@ * warranty of any kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { model = "Marvell Orion5x SoC"; @@ -17,149 +19,214 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 - 0xf2200000 0xf2200000 0x0000800>; - #address-cells = <1>; + soc { + #address-cells = <2>; #size-cells = <1>; + controller = <&mbusc>; - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <6>, <7>, <8>, <9>; - }; - - spi@10600 { - compatible = "marvell,orion-spi"; + devbus_bootcs: devbus-bootcs { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; + devbus_cs0: devbus-cs0 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <3>; - /* set clock-frequency in board dts */ + devbus_cs1: devbus-cs1 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <4>; - /* set clock-frequency in board dts */ + devbus_cs2: devbus-cs2 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - status = "okay"; - }; + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <6>, <7>, <8>, <9>; + }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <17>; - status = "disabled"; - }; + spi: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; + i2c: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clocks = <&core_clk 0>; + status = "disabled"; + }; - xor00 { - interrupts = <30>; - dmacap,memcpy; - dmacap,xor; + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + clocks = <&core_clk 0>; + status = "disabled"; }; - xor01 { - interrupts = <31>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + clocks = <&core_clk 0>; + status = "disabled"; }; - }; - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <4>; + }; - ethernet-port@0 { - compatible = "marvell,orion-eth-port"; - reg = <0>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; }; - }; - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; - /* add phy nodes in board file */ - }; + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + status = "okay"; + }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; + ehci0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + xor: dma-controller@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethport: ethernet-port@0 { + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <21>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + ehci1: ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; + reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, + <MBUS_ID(0x09, 0x00) 0x0 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; - - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index 0d6588d549bf..963b7e54ab15 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -201,6 +201,7 @@ compatible = "sirf,prima2-tick"; reg = <0xb0020000 0x1000>; interrupts = <0>; + clocks = <&clks 11>; }; nand@b0030000 { @@ -313,8 +314,9 @@ reg = <0xb00d0000 0x10000>; interrupts = <15>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <25>; - sirf,spi-dma-tx-channel = <20>; + dmas = <&dmac1 9>, + <&dmac1 4>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 19>; @@ -327,8 +329,9 @@ reg = <0xb0170000 0x10000>; interrupts = <16>; sirf,spi-num-chipselects = <1>; - sirf,spi-dma-rx-channel = <12>; - sirf,spi-dma-tx-channel = <13>; + dmas = <&dmac0 12>, + <&dmac0 13>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; clocks = <&clks 20>; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts new file mode 100644 index 000000000000..7c2441d526bc --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -0,0 +1,16 @@ +#include "qcom-apq8064-v2.0.dtsi" + +/ { + model = "Qualcomm APQ8064/IFC6410"; + compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + + soc { + gsbi@16600000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + status = "ok"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi new file mode 100644 index 000000000000..935c3945fc5e --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi @@ -0,0 +1 @@ +#include "qcom-apq8064.dtsi" diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi new file mode 100644 index 000000000000..92bf793622c3 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -0,0 +1,170 @@ +/dts-v1/; + +#include "skeleton.dtsi" +#include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm APQ8064"; + compatible = "qcom,apq8064"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + }; + + cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + }; + + cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + }; + + cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 10 0x304>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; + + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; + + acc2: clock-controller@20a8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020a8000 0x1000>, <0x02008000 0x1000>; + }; + + acc3: clock-controller@20b8000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x020b8000 0x1000>, <0x02008000 0x1000>; + }; + + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw2: regulator@20a9000 { + compatible = "qcom,saw2"; + reg = <0x020a9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + saw3: regulator@20b9000 { + compatible = "qcom,saw2"; + reg = <0x020b9000 0x1000>, <0x02009000 0x1000>; + regulator; + }; + + gsbi7: gsbi@16600000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16600000 0x100>; + clocks = <&gcc GSBI7_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16640000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16640000 0x1000>, + <0x16600000 0x1000>; + interrupts = <0 158 0x0>; + clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x00500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-apq8064"; + reg = <0x00900000 0x4000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index 13ac3e222495..b4dfb01fe6fb 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -3,4 +3,43 @@ / { model = "Qualcomm APQ8074 Dragonboard"; compatible = "qcom,apq8074-dragonboard", "qcom,apq8074"; + + soc { + serial@f991e000 { + status = "ok"; + }; + + sdhci@f9824900 { + bus-width = <8>; + non-removable; + status = "ok"; + }; + + sdhci@f98a4900 { + cd-gpios = <&msmgpio 62 0x1>; + bus-width = <4>; + }; + + + pinctrl@fd510000 { + spi8_default: spi8_default { + mosi { + pins = "gpio45"; + function = "blsp_spi8"; + }; + miso { + pins = "gpio46"; + function = "blsp_spi8"; + }; + cs { + pins = "gpio47"; + function = "blsp_spi8"; + }; + clk { + pins = "gpio48"; + function = "blsp_spi8"; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts new file mode 100644 index 000000000000..9dae3878b71d --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts @@ -0,0 +1,6 @@ +#include "qcom-apq8084.dtsi" + +/ { + model = "Qualcomm APQ 8084-MTP"; + compatible = "qcom,apq8084-mtp", "qcom,apq8084"; +}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi new file mode 100644 index 000000000000..e3e009a5912b --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -0,0 +1,179 @@ +/dts-v1/; + +#include "skeleton.dtsi" + +/ { + model = "Qualcomm APQ 8084"; + compatible = "qcom,apq8084"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <0>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <1>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <2>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "qcom,krait"; + reg = <3>; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; + qcom,acc = <&acc3>; + }; + + L2: l2-cache { + compatible = "qcom,arch-cache"; + cache-level = <2>; + qcom,saw = <&saw_l2>; + }; + }; + + cpu-pmu { + compatible = "qcom,krait-pmu"; + interrupts = <1 7 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + saw_l2: regulator@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + acc0: clock-controller@f9088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9088000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc1: clock-controller@f9098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf9098000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc2: clock-controller@f90a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90a8000 0x1000>, + <0xf9008000 0x1000>; + }; + + acc3: clock-controller@f90b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0xf90b8000 0x1000>, + <0xf9008000 0x1000>; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index 169bad90dac9..45180adfadf1 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8660 SURF"; compatible = "qcom,msm8660-surf", "qcom,msm8660"; + + soc { + gsbi@19c00000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@19c40000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index c52a9e964a44..53837aaa2f72 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8660.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8660"; @@ -12,16 +13,18 @@ cpus { #address-cells = <1>; #size-cells = <0>; - compatible = "qcom,scorpion"; - enable-method = "qcom,gcc-msm8660"; cpu@0 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; }; cpu@1 { + compatible = "qcom,scorpion"; + enable-method = "qcom,gcc-msm8660"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -33,55 +36,73 @@ }; }; - intc: interrupt-controller@2080000 { - compatible = "qcom,msm-8660-qgic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02080000 0x1000 >, - < 0x02081000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; - timer@2000000 { - compatible = "qcom,scss-timer", "qcom,msm-timer"; - interrupts = <1 0 0x301>, - <1 1 0x301>, - <1 2 0x301>; - reg = <0x02000000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x40000>; - }; + intc: interrupt-controller@2080000 { + compatible = "qcom,msm-8660-qgic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02080000 0x1000 >, + < 0x02081000 0x1000 >; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - reg = <0x00800000 0x4000>; - gpio-controller; - #gpio-cells = <2>; - ngpio = <173>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - }; + timer@2000000 { + compatible = "qcom,scss-timer", "qcom,msm-timer"; + interrupts = <1 0 0x301>, + <1 1 0x301>, + <1 2 0x301>; + reg = <0x02000000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x40000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8660"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + reg = <0x00800000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + ngpio = <173>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + }; - serial@19c40000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x19c40000 0x1000>, - <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; - clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; - clock-names = "core", "iface"; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8660"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + gsbi12: gsbi@19c00000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x19c00000 0x100>; + clocks = <&gcc GSBI12_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; + serial@19c40000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x19c40000 0x1000>, + <0x19c00000 0x1000>; + interrupts = <0 195 0x0>; + clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts index a58fb88315f6..8f75cc4c8340 100644 --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts @@ -3,4 +3,14 @@ / { model = "Qualcomm MSM8960 CDP"; compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + + soc { + gsbi@16400000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16440000 { + status = "ok"; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index 997b7b94e117..5303e53e34dc 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -3,6 +3,7 @@ /include/ "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/soc/qcom,gsbi.h> / { model = "Qualcomm MSM8960"; @@ -13,10 +14,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 14 0x304>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -25,6 +26,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v1"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -35,7 +38,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; }; }; @@ -45,91 +47,109 @@ qcom,no-pc-write; }; - intc: interrupt-controller@2000000 { - compatible = "qcom,msm-qgic2"; - interrupt-controller; - #interrupt-cells = <3>; - reg = < 0x02000000 0x1000 >, - < 0x02002000 0x1000 >; - }; + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; - timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; - interrupts = <1 1 0x301>, - <1 2 0x301>, - <1 3 0x301>; - reg = <0x0200a000 0x100>; - clock-frequency = <27000000>, - <32768>; - cpu-offset = <0x80000>; - }; + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <1 1 0x301>, + <1 2 0x301>, + <1 3 0x301>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; - msmgpio: gpio@800000 { - compatible = "qcom,msm-gpio"; - gpio-controller; - #gpio-cells = <2>; - ngpio = <150>; - interrupts = <0 16 0x4>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x800000 0x4000>; - }; + msmgpio: gpio@800000 { + compatible = "qcom,msm-gpio"; + gpio-controller; + #gpio-cells = <2>; + ngpio = <150>; + interrupts = <0 16 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; - gcc: clock-controller@900000 { - compatible = "qcom,gcc-msm8960"; - #clock-cells = <1>; - #reset-cells = <1>; - reg = <0x900000 0x4000>; - }; + gcc: clock-controller@900000 { + compatible = "qcom,gcc-msm8960"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; - clock-controller@4000000 { - compatible = "qcom,mmcc-msm8960"; - reg = <0x4000000 0x1000>; - #clock-cells = <1>; - #reset-cells = <1>; - }; + clock-controller@4000000 { + compatible = "qcom,mmcc-msm8960"; + reg = <0x4000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; - }; + acc0: clock-controller@2088000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02088000 0x1000>, <0x02008000 0x1000>; + }; - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; - }; + acc1: clock-controller@2098000 { + compatible = "qcom,kpss-acc-v1"; + reg = <0x02098000 0x1000>, <0x02008000 0x1000>; + }; - saw0: regulator@2089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw0: regulator@2089000 { + compatible = "qcom,saw2"; + reg = <0x02089000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - saw1: regulator@2099000 { - compatible = "qcom,saw2"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; + saw1: regulator@2099000 { + compatible = "qcom,saw2"; + reg = <0x02099000 0x1000>, <0x02009000 0x1000>; + regulator; + }; - serial@16440000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x16440000 0x1000>, - <0x16400000 0x1000>; - interrupts = <0 154 0x0>; - clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; - clock-names = "core", "iface"; - }; + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; - qcom,ssbi@500000 { - compatible = "qcom,ssbi"; - reg = <0x500000 0x1000>; - qcom,controller-type = "pmic-arbiter"; - }; + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + }; - rng@1a500000 { - compatible = "qcom,prng"; - reg = <0x1a500000 0x200>; - clocks = <&gcc PRNG_CLK>; - clock-names = "core"; + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index f68723918b3f..69dca2aca25a 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -13,10 +13,10 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <1 9 0xf04>; - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v2"; cpu@0 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <0>; next-level-cache = <&L2>; @@ -24,6 +24,8 @@ }; cpu@1 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; @@ -31,6 +33,8 @@ }; cpu@2 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; @@ -38,6 +42,8 @@ }; cpu@3 { + compatible = "qcom,krait"; + enable-method = "qcom,kpss-acc-v2"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; @@ -47,7 +53,6 @@ L2: l2-cache { compatible = "cache"; cache-level = <2>; - interrupts = <0 2 0x4>; qcom,saw = <&saw_l2>; }; }; @@ -57,6 +62,15 @@ interrupts = <1 7 0xf04>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 2 0xf08>, + <1 3 0xf08>, + <1 4 0xf08>, + <1 1 0xf08>; + clock-frequency = <19200000>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -71,15 +85,6 @@ <0xf9002000 0x1000>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; - clock-frequency = <19200000>; - }; - timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -190,6 +195,29 @@ interrupts = <0 108 0x0>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 123 0>, <0 138 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + sdhci@f98a4900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + reg-names = "hc_mem", "core_mem"; + interrupts = <0 125 0>, <0 221 0>; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; }; rng@f9bff000 { @@ -198,5 +226,15 @@ clocks = <&gcc GCC_PRNG_AHB_CLK>; clock-names = "core"; }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100-genmai-reference.dts b/arch/arm/boot/dts/r7s72100-genmai-reference.dts deleted file mode 100644 index e664611a47c8..000000000000 --- a/arch/arm/boot/dts/r7s72100-genmai-reference.dts +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Device Tree Source for the Genmai board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r7s72100.dtsi" - -/ { - model = "Genmai"; - compatible = "renesas,genmai-reference", "renesas,r7s72100"; - - chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; - }; - - memory { - device_type = "memory"; - reg = <0x08000000 0x08000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "renesas,24c128"; - reg = <0x50>; - pagesize = <64>; - }; -}; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index b1deaf7e2e06..56849b55e1c2 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -1,7 +1,8 @@ /* * Device Tree Source for the Genmai board * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -15,6 +16,10 @@ model = "Genmai"; compatible = "renesas,genmai", "renesas,r7s72100"; + aliases { + serial2 = &scif2; + }; + chosen { bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -29,3 +34,26 @@ #size-cells = <1>; }; }; + +&extal_clk { + clock-frequency = <13330000>; +}; + +&usb_x1_clk { + clock-frequency = <48000000>; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "renesas,24c128"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&scif2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index ee700717a34b..f50fbc8f3bd9 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -1,13 +1,15 @@ /* * Device Tree Source for the r7s72100 SoC * - * Copyright (C) 2013 Renesas Solutions Corp. + * Copyright (C) 2013-14 Renesas Solutions Corp. + * Copyright (C) 2014 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com> * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any * kind, whether express or implied. */ +#include <dt-bindings/clock/r7s72100-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -28,6 +30,112 @@ spi4 = &spi4; }; + clocks { + ranges; + #address-cells = <1>; + #size-cells = <1>; + + /* External clocks */ + extal_clk: extal_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + usb_x1_clk: usb_x1_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value must be set by board */ + clock-frequency = <0>; + clock-output-names = "usb_x1"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@fcfe0000 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-cpg-clocks", + "renesas,rz-cpg-clocks"; + reg = <0xfcfe0000 0x18>; + clocks = <&extal_clk>, <&usb_x1_clk>; + clock-output-names = "pll", "i", "g"; + }; + + /* Fixed factor clocks */ + b_clk: b_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <3>; + clock-output-names = "b"; + }; + p1_clk: p1_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <6>; + clock-output-names = "p1"; + }; + p0_clk: p0_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R7S72100_CLK_PLL>; + clock-mult = <1>; + clock-div = <12>; + clock-output-names = "p0"; + }; + + /* MSTP clocks */ + mstp3_clks: mstp3_clks@fcfe0420 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0420 4>; + clocks = <&p0_clk>; + clock-indices = <R7S72100_CLK_MTU2>; + clock-output-names = "mtu2"; + }; + + mstp4_clks: mstp4_clks@fcfe0424 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0424 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>; + clock-indices = < + R7S72100_CLK_SCIF0 R7S72100_CLK_SCIF1 R7S72100_CLK_SCIF2 R7S72100_CLK_SCIF3 + R7S72100_CLK_SCIF4 R7S72100_CLK_SCIF5 R7S72100_CLK_SCIF6 R7S72100_CLK_SCIF7 + >; + clock-output-names = "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scif6", "scif7"; + }; + + mstp9_clks: mstp9_clks@fcfe0438 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0438 4>; + clocks = <&p0_clk>, <&p0_clk>, <&p0_clk>, <&p0_clk>; + clock-indices = < + R7S72100_CLK_I2C0 R7S72100_CLK_I2C1 R7S72100_CLK_I2C2 R7S72100_CLK_I2C3 + >; + clock-output-names = "i2c0", "i2c1", "i2c2", "i2c3"; + }; + + mstp10_clks: mstp10_clks@fcfe043c { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe043c 4>; + clocks = <&p1_clk>, <&p1_clk>, <&p1_clk>, <&p1_clk>, + <&p1_clk>; + clock-indices = < + R7S72100_CLK_SPI0 R7S72100_CLK_SPI1 R7S72100_CLK_SPI2 R7S72100_CLK_SPI3 + R7S72100_CLK_SPI4 + >; + clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -61,6 +169,7 @@ <0 162 IRQ_TYPE_LEVEL_HIGH>, <0 163 IRQ_TYPE_LEVEL_HIGH>, <0 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C0>; clock-frequency = <100000>; status = "disabled"; }; @@ -78,6 +187,7 @@ <0 170 IRQ_TYPE_LEVEL_HIGH>, <0 171 IRQ_TYPE_LEVEL_HIGH>, <0 172 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C1>; clock-frequency = <100000>; status = "disabled"; }; @@ -95,6 +205,7 @@ <0 178 IRQ_TYPE_LEVEL_HIGH>, <0 179 IRQ_TYPE_LEVEL_HIGH>, <0 180 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C2>; clock-frequency = <100000>; status = "disabled"; }; @@ -112,10 +223,107 @@ <0 186 IRQ_TYPE_LEVEL_HIGH>, <0 187 IRQ_TYPE_LEVEL_HIGH>, <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R7S72100_CLK_I2C3>; clock-frequency = <100000>; status = "disabled"; }; + scif0: serial@e8007000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007000 64>; + interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>, + <0 191 IRQ_TYPE_LEVEL_HIGH>, + <0 192 IRQ_TYPE_LEVEL_HIGH>, + <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF0>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@e8007800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8007800 64>; + interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>, + <0 195 IRQ_TYPE_LEVEL_HIGH>, + <0 196 IRQ_TYPE_LEVEL_HIGH>, + <0 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF1>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@e8008000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008000 64>; + interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>, + <0 199 IRQ_TYPE_LEVEL_HIGH>, + <0 200 IRQ_TYPE_LEVEL_HIGH>, + <0 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF2>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@e8008800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8008800 64>; + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>, + <0 203 IRQ_TYPE_LEVEL_HIGH>, + <0 204 IRQ_TYPE_LEVEL_HIGH>, + <0 201 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF3>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@e8009000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009000 64>; + interrupts = <0 206 IRQ_TYPE_LEVEL_HIGH>, + <0 207 IRQ_TYPE_LEVEL_HIGH>, + <0 208 IRQ_TYPE_LEVEL_HIGH>, + <0 205 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF4>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@e8009800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe8009800 64>; + interrupts = <0 210 IRQ_TYPE_LEVEL_HIGH>, + <0 211 IRQ_TYPE_LEVEL_HIGH>, + <0 212 IRQ_TYPE_LEVEL_HIGH>, + <0 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF5>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif6: serial@e800a000 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a000 64>; + interrupts = <0 214 IRQ_TYPE_LEVEL_HIGH>, + <0 215 IRQ_TYPE_LEVEL_HIGH>, + <0 216 IRQ_TYPE_LEVEL_HIGH>, + <0 213 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF6>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif7: serial@e800a800 { + compatible = "renesas,scif-r7s72100", "renesas,scif"; + reg = <0xe800a800 64>; + interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>, + <0 219 IRQ_TYPE_LEVEL_HIGH>, + <0 220 IRQ_TYPE_LEVEL_HIGH>, + <0 217 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R7S72100_CLK_SCIF7>; + clock-names = "sci_ick"; + status = "disabled"; + }; + spi0: spi@e800c800 { compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz"; reg = <0xe800c800 0x24>; @@ -123,6 +331,7 @@ <0 239 IRQ_TYPE_LEVEL_HIGH>, <0 240 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI0>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -136,6 +345,7 @@ <0 242 IRQ_TYPE_LEVEL_HIGH>, <0 243 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI1>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -149,6 +359,7 @@ <0 245 IRQ_TYPE_LEVEL_HIGH>, <0 246 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI2>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -162,6 +373,7 @@ <0 248 IRQ_TYPE_LEVEL_HIGH>, <0 249 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI3>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; @@ -175,6 +387,7 @@ <0 251 IRQ_TYPE_LEVEL_HIGH>, <0 252 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "rx", "tx"; + clocks = <&mstp10_clks R7S72100_CLK_SPI4>; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 62d0211bd192..82c5ac825386 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, @@ -95,7 +94,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>, @@ -136,7 +134,6 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupt-parent = <&gic>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH 0 201 IRQ_TYPE_LEVEL_HIGH @@ -171,7 +168,6 @@ compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupt-parent = <&gic>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; @@ -180,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -190,7 +185,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,7 +194,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -210,7 +203,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -220,7 +212,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -230,7 +221,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -240,7 +230,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -250,7 +239,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -260,7 +248,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -268,7 +255,6 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -277,7 +263,6 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -309,7 +294,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -318,7 +302,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -327,7 +310,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 95a849bf921f..486007d7ffe4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> @@ -77,26 +78,26 @@ power-key { gpios = <&pfc 99 GPIO_ACTIVE_LOW>; - linux,code = <116>; + linux,code = <KEY_POWER>; label = "SW3"; gpio-key,wakeup; }; back-key { gpios = <&pfc 100 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW4"; }; menu-key { gpios = <&pfc 97 GPIO_ACTIVE_LOW>; - linux,code = <139>; + linux,code = <KEY_MENU>; label = "SW5"; }; home-key { gpios = <&pfc 98 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW6"; }; }; @@ -117,6 +118,16 @@ }; }; + i2c2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */ + &pfc 91 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + backlight { compatible = "pwm-backlight"; pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; @@ -147,6 +158,18 @@ }; }; +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy0>; + status = "ok"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c0 { status = "okay"; touchscreen@55 { @@ -166,10 +189,23 @@ }; }; +&i2c2 { + status = "okay"; + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; +}; + &pfc { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; + ether_pins: ether { + renesas,groups = "gether_mii", "gether_int"; + renesas,function = "gether"; + }; + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 2551e9438d35..55d29f4d2ed6 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7740"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -22,6 +23,7 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; @@ -48,7 +50,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -69,7 +70,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -90,7 +90,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -111,7 +110,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -122,12 +120,23 @@ 0 149 IRQ_TYPE_LEVEL_HIGH>; }; + ether: ethernet@e9a00000 { + compatible = "renesas,gether-r8a7740"; + reg = <0xe9a00000 0x800>, + <0xe9a01800 0x800>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@fff20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH 0 202 IRQ_TYPE_LEVEL_HIGH 0 203 IRQ_TYPE_LEVEL_HIGH @@ -138,9 +147,8 @@ i2c1: i2c@e6c20000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH 0 71 IRQ_TYPE_LEVEL_HIGH 0 72 IRQ_TYPE_LEVEL_HIGH @@ -173,9 +181,8 @@ }; mmcif0: mmc@e6bd0000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -184,7 +191,6 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; @@ -196,7 +202,6 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; @@ -208,7 +213,6 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; @@ -219,9 +223,8 @@ sh_fsi2: sound@fe1f0000 { #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; + compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 9 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 06cda19dac6a..f76f6ec01e19 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -109,4 +109,18 @@ pinctrl-0 = <&hspi0_pins>; pinctrl-names = "default"; status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl008k"; + reg = <0>; + spi-max-frequency = <104000000>; + m25p,fast-read; + + partition@0 { + label = "data(spi)"; + reg = <0x00000000 0x00100000>; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 85c5b3b99f5e..3af0a2187493 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -20,6 +20,7 @@ / { compatible = "renesas,r8a7778"; + interrupt-parent = <&gic>; cpus { cpu@0 { @@ -52,7 +53,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -63,7 +63,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -75,7 +74,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -87,7 +85,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -99,7 +96,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -111,7 +107,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -130,7 +125,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,7 +134,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,7 +143,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -160,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -168,7 +159,6 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -176,7 +166,6 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -186,7 +175,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -196,7 +184,6 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -204,26 +191,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 76f5eef7d1cc..b27c6373ff4d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -45,6 +45,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index d0561d4c7c46..b517c8e6b420 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -15,6 +15,7 @@ / { compatible = "renesas,r8a7779"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -59,7 +60,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -71,7 +71,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -83,7 +82,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -95,7 +93,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -107,7 +104,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -119,7 +115,6 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -131,7 +126,6 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -150,7 +144,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -163,7 +156,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -173,7 +165,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,7 +174,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -193,7 +183,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -211,14 +200,12 @@ sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupt-parent = <&gic>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -228,7 +215,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -238,7 +224,6 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -248,7 +233,6 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -256,26 +240,29 @@ }; hspi0: spi@fffc7000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi1: spi@fffc8000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; hspi2: spi@fffc6000 { - compatible = "renesas,hspi"; + compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-controller = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index d01048ab3e77..dd2fe46073f2 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -12,11 +12,17 @@ /dts-v1/; #include "r8a7790.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Lager"; compatible = "renesas,lager", "renesas,r8a7790"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -36,6 +42,39 @@ #size-cells = <1>; }; + gpio_keys { + compatible = "gpio-keys"; + + button@1 { + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + button@2 { + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + }; + button@3 { + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; + }; + button@4 { + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + }; + }; + leds { compatible = "gpio-leds"; led6 { @@ -112,7 +151,7 @@ }; &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; du_pins: du { @@ -155,10 +194,16 @@ renesas,function = "mmc1"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof1_pins: spi2 { + renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", + "msiof1_tx"; + renesas,function = "msiof1"; + }; }; ðer { @@ -173,6 +218,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -190,7 +236,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -202,6 +248,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -221,6 +269,35 @@ }; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&msiof1 { + pinctrl-0 = <&msiof1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 618e5b537eaf..7ff29601f962 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -24,6 +24,15 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; + i2c4 = &iic0; + i2c5 = &iic1; + i2c6 = &iic2; + i2c7 = &iic3; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; + spi4 = &msiof3; }; cpus { @@ -108,6 +117,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -119,6 +129,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -130,6 +141,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -141,6 +153,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -152,6 +165,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -163,6 +177,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; }; thermal@e61f0000 { @@ -231,6 +246,46 @@ status = "disabled"; }; + iic0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC0>; + status = "disabled"; + }; + + iic1: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC1>; + status = "disabled"; + }; + + iic2: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe6520000 0 0x425>; + interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_IIC2>; + status = "disabled"; + }; + + iic3: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; + status = "disabled"; + }; + mmcif0: mmcif@ee200000 { compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -673,7 +728,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", @@ -697,18 +752,19 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, - <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, - <&mmc0_clk>, <&rclk_clk>; + clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, + <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, + <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 - R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 - R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 + R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 >; clock-output-names = - "tpu0", "mmcif1", "sdhi3", "sdhi2", - "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "iic2", "tpu0", "mmcif1", "sdhi3", + "sdhi2", "sdhi1", "sdhi0", "mmcif0", + "iic0", "iic1", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -752,20 +808,25 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD - R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 - R8A7790_CLK_I2C0 + R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 + R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 + R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS + R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "iic3", + "i2c3", "i2c2", "i2c1", "i2c0"; }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7790", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -775,4 +836,44 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c90000 { + compatible = "renesas,msiof-r8a7790"; + reg = <0 0xe6c90000 0 0x0064>; + interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts new file mode 100644 index 000000000000..cc6d992e8db2 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -0,0 +1,219 @@ +/* + * Device Tree Source for the Henninger board + * + * Copyright (C) 2014 Renesas Solutions Corp. + * Copyright (C) 2014 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Henninger"; + compatible = "renesas,henninger", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index de1b6977c69a..05d44f9b202f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -13,11 +13,17 @@ /dts-v1/; #include "r8a7791.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; + aliases { + serial6 = &scif0; + serial7 = &scif1; + }; + chosen { bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; @@ -40,51 +46,79 @@ gpio-keys { compatible = "gpio-keys"; + key-1 { + gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "SW2-1"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "SW2-2"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "SW2-3"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "SW2-4"; + gpio-key,wakeup; + debounce-interval = <20>; + }; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <30>; + linux,code = <KEY_A>; label = "SW30"; gpio-key,wakeup; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <48>; + linux,code = <KEY_B>; label = "SW31"; gpio-key,wakeup; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <46>; + linux,code = <KEY_C>; label = "SW32"; gpio-key,wakeup; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <32>; + linux,code = <KEY_D>; label = "SW33"; gpio-key,wakeup; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <18>; + linux,code = <KEY_E>; label = "SW34"; gpio-key,wakeup; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <33>; + linux,code = <KEY_F>; label = "SW35"; gpio-key,wakeup; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <34>; + linux,code = <KEY_G>; label = "SW36"; gpio-key,wakeup; debounce-interval = <20>; @@ -195,11 +229,16 @@ }; }; +&i2c6 { + status = "okay"; + clock-frequency = <100000>; +}; + &pfc { - pinctrl-0 = <&du_pins &scif0_pins &scif1_pins>; + pinctrl-0 = <&du_pins>; pinctrl-names = "default"; - i2c2_pins: i2c { + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; }; @@ -244,10 +283,16 @@ renesas,function = "sdhi2"; }; - qspi_pins: spi { + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; }; ðer { @@ -262,6 +307,7 @@ reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; }; }; @@ -269,6 +315,20 @@ status = "okay"; }; +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; @@ -301,7 +361,7 @@ status = "okay"; }; -&spi { +&qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -313,6 +373,8 @@ compatible = "spansion,s25fl512s"; reg = <0>; spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; m25p,fast-read; partition@0 { @@ -331,3 +393,18 @@ }; }; }; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic: pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 46181708e59c..8d7ffaeff6e0 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -27,6 +27,13 @@ i2c3 = &i2c3; i2c4 = &i2c4; i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; + spi3 = &msiof2; }; cpus { @@ -37,14 +44,14 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1300000000>; + clock-frequency = <1500000000>; }; }; @@ -69,6 +76,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -80,6 +88,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -91,6 +100,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -102,6 +112,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -113,6 +124,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -124,6 +136,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; }; gpio6: gpio@e6055400 { @@ -135,6 +148,7 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; }; gpio7: gpio@e6055800 { @@ -146,6 +160,7 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; }; thermal@e61f0000 { @@ -180,6 +195,7 @@ <0 17 IRQ_TYPE_LEVEL_HIGH>; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -231,6 +247,7 @@ }; i2c5: i2c@e6528000 { + /* doesn't need pinmux */ #address-cells = <1>; #size-cells = <0>; compatible = "renesas,i2c-r8a7791"; @@ -240,6 +257,37 @@ status = "disabled"; }; + i2c6: i2c@e60b0000 { + /* doesn't need pinmux */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; + status = "disabled"; + }; + + i2c7: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6500000 0 0x425>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC0>; + status = "disabled"; + }; + + i2c8: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7791", "renesas,rmobile-iic"; + reg = <0 0xe6510000 0 0x425>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_IIC1>; + status = "disabled"; + }; + pfc: pfc@e6060000 { compatible = "renesas,pfc-r8a7791"; reg = <0 0xe6060000 0 0x250>; @@ -249,7 +297,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; status = "disabled"; @@ -258,7 +305,6 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; status = "disabled"; @@ -267,7 +313,6 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; status = "disabled"; @@ -688,7 +733,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", @@ -712,15 +757,16 @@ mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; - clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, - <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, + <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 - R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 >; clock-output-names = - "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + "tpu0", "sdhi2", "sdhi1", "sdhi0", + "mmcif0", "i2c7", "i2c8", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -733,19 +779,19 @@ mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 + R8A7791_CLK_EHCI R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 R8A7791_CLK_LVDS0 >; clock-output-names = - "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "ehci", "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; }; mstp8_clks: mstp8_clks@e6150990 { @@ -764,18 +810,23 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, - <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, - <&p_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, + <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < - R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD - R8A7791_CLK_I2C5 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 - R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 + R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 + R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 + R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", - "i2c2", "i2c1", "i2c0"; + "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -789,7 +840,7 @@ }; }; - spi: spi@e6b10000 { + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7791", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; @@ -799,4 +850,34 @@ #size-cells = <0>; status = "disabled"; }; + + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6e00000 { + compatible = "renesas,msiof-r8a7791"; + reg = <0 0xe6e00000 0 0x0064>; + interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index 035df4053c21..afb327322a4a 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -18,6 +18,7 @@ / { model = "bq Curie 2"; + compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; memory { reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 4d4dfbb59f4b..4387cfd420ba 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; @@ -79,7 +80,7 @@ pinctrl@20008000 { compatible = "rockchip,rk3066a-pinctrl"; - reg = <0x20008000 0x150>; + rockchip,grf = <&grf>; #address-cells = <1>; #size-cells = <1>; ranges; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 3ba1968a70ab..a5eee55079cb 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -17,6 +17,7 @@ / { model = "Radxa Rock"; + compatible = "radxa,rock", "rockchip,rk3188"; memory { reg = <0x60000000 0x80000000>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ed9a70af3e3f..238c996d4a7f 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; @@ -75,17 +76,16 @@ pinctrl@20008000 { compatible = "rockchip,rk3188-pinctrl"; - reg = <0x20008000 0xa0>, - <0x20008164 0x1a0>; - reg-names = "base", "pull"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + #address-cells = <1>; #size-cells = <1>; ranges; gpio0: gpio0@0x2000a000 { compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>, - <0x20004064 0x8>; + reg = <0x2000a000 0x100>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_gates8 9>; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 26e5a968d49d..2adf1cc9e85d 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -31,11 +31,16 @@ reg = <0x1013c000 0x100>; }; - pmu@20004000 { - compatible = "rockchip,rk3066-pmu"; + pmu: pmu@20004000 { + compatible = "rockchip,rk3066-pmu", "syscon"; reg = <0x20004000 0x100>; }; + grf: grf@20008000 { + compatible = "syscon"; + reg = <0x20008000 0x200>; + }; + gic: interrupt-controller@1013d000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index 59594cf15998..ea92fd69529a 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -19,6 +19,19 @@ reg = <0x30000000 0x4000000>; }; + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + xti: xti { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "xti"; + #clock-cells = <0>; + }; + }; + serial@50000000 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index e6555bdd81b8..955e4a4f8c31 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/clock/s3c2443.h> #include "s3c24xx.dtsi" #include "s3c2416-pinctrl.dtsi" @@ -28,26 +29,53 @@ compatible = "samsung,s3c2416-irq"; }; + clocks: clock-controller@0x4c000000 { + compatible = "samsung,s3c2416-clock"; + reg = <0x4c000000 0x40>; + #clock-cells = <1>; + }; + pinctrl@56000000 { compatible = "samsung,s3c2416-pinctrl"; }; + timer@51000000 { + clocks = <&clocks PCLK_PWM>; + clock-names = "timers"; + }; + serial@50000000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>, + <&clocks SCLK_UART>; }; serial@50004000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; }; serial@50008000 { compatible = "samsung,s3c2440-uart"; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>, + <&clocks SCLK_UART>; }; serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>, + <&clocks SCLK_UART>; status = "disabled"; }; @@ -55,6 +83,10 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>, + <&clocks MUX_HSMMC0>; status = "disabled"; }; @@ -62,18 +94,28 @@ compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; + clock-names = "hsmmc", "mmc_busclk.0", + "mmc_busclk.2"; + clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>, + <&clocks MUX_HSMMC1>; status = "disabled"; }; watchdog@53000000 { interrupts = <1 9 27 3>; + clocks = <&clocks PCLK_WDT>; + clock-names = "watchdog"; }; rtc@57000000 { compatible = "samsung,s3c2416-rtc"; + clocks = <&clocks PCLK_RTC>; + clock-names = "rtc"; }; i2c@54000000 { compatible = "samsung,s3c2440-i2c"; + clocks = <&clocks PCLK_I2C0>; + clock-names = "i2c"; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a106b0872910..e0b15a6e8897 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -113,6 +125,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0008000 0x4000>; interrupts = <38 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(13)>, + <&dma0 2 AT91_DMA_CFG_PER_ID(14)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; @@ -231,6 +246,9 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf800c000 0x4000>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH 4>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(3)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(4)>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; @@ -577,6 +595,84 @@ }; }; + pwm0 { + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 { + atmel,pins = + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */ + }; + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 { + atmel,pins = + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */ + }; + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */ + }; + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 { + atmel,pins = + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */ + }; + + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 { + atmel,pins = + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */ + }; + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 { + atmel,pins = + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */ + }; + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 { + atmel,pins = + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */ + }; + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */ + }; + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 { + atmel,pins = + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */ + }; + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 { + atmel,pins = + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */ + }; + + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 { + atmel,pins = + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */ + }; + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */ + }; + pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 { + atmel,pins = + <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */ + }; + pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */ + }; + + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */ + }; + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 { + atmel,pins = + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */ + }; + pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */ + }; + pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 { + atmel,pins = + <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */ + }; + }; + spi0 { pinctrl_spi0: spi0-0 { atmel,pins = @@ -749,18 +845,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1089,6 +1196,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index dba739b6ef36..306eef0f97ef 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -32,6 +32,10 @@ }; }; + ssc0: ssc@f0008000 { + atmel,clk-from-rk-pin; + }; + /* * i2c0 conflicts with ISI: * disable it to allow the use of ISI @@ -156,7 +160,7 @@ }; sound { - compatible = "atmel,sama5d3ek-wm8904"; + compatible = "atmel,asoc-wm8904"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pck0_as_audio_mck>; @@ -166,9 +170,12 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", + "MICBIAS", "IN1L", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; atmel,audio-codec = <&wm8904>; + + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index eb8886b535e4..a99171c8a782 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "sh73a0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -112,43 +113,43 @@ back-key { gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; - linux,code = <158>; + linux,code = <KEY_BACK>; label = "SW3"; }; right-key { gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; - linux,code = <106>; + linux,code = <KEY_RIGHT>; label = "SW2-R"; }; left-key { gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; - linux,code = <105>; + linux,code = <KEY_LEFT>; label = "SW2-L"; }; enter-key { gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; - linux,code = <28>; + linux,code = <KEY_ENTER>; label = "SW2-P"; }; up-key { gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; - linux,code = <103>; + linux,code = <KEY_UP>; label = "SW2-U"; }; down-key { gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; - linux,code = <108>; + linux,code = <KEY_DOWN>; label = "SW2-D"; }; home-key { gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; - linux,code = <102>; + linux,code = <KEY_HOME>; label = "SW1"; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 56fc214e6d2c..4676f25e87a7 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -15,7 +15,8 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/reset/altr,rst-mgr.h> / { #address-cells = <1>; @@ -75,7 +76,14 @@ pdma: pdma@ffe01000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xffe01000 0x1000>; - interrupts = <0 180 4>; + interrupts = <0 104 4>, + <0 105 4>, + <0 106 4>, + <0 107 4>, + <0 108 4>, + <0 109 4>, + <0 110 4>, + <0 111 4>; #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; @@ -84,6 +92,22 @@ }; }; + can0: can@ffc00000 { + compatible = "bosch,d_can"; + reg = <0xffc00000 0x1000>; + interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>; + clocks = <&can0_clk>; + status = "disabled"; + }; + + can1: can@ffc01000 { + compatible = "bosch,d_can"; + reg = <0xffc01000 0x1000>; + interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>; + clocks = <&can1_clk>; + status = "disabled"; + }; + clkmgr@ffd04000 { compatible = "altr,clk-mgr"; reg = <0xffd04000 0x1000>; @@ -124,7 +148,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <2>; + div-reg = <0xe0 0 9>; reg = <0x48>; }; @@ -132,7 +156,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe4 0 9>; reg = <0x4C>; }; @@ -140,7 +164,7 @@ #clock-cells = <0>; compatible = "altr,socfpga-perip-clk"; clocks = <&main_pll>; - fixed-divider = <4>; + div-reg = <0xe8 0 9>; reg = <0x50>; }; @@ -460,6 +484,8 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac0_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -472,9 +498,111 @@ mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac1_clk>; clock-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>; + reset-names = "stmmaceth"; + status = "disabled"; + }; + + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; + }; + + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; status = "disabled"; }; + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; + }; + + gpio@ff708000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff708000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio0: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 164 4>; + }; + }; + + gpio@ff709000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff709000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio1: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <29>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 165 4>; + }; + }; + + gpio@ff70a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xff70a000 0x1000>; + clocks = <&per_base_clk>; + status = "disabled"; + + gpio2: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <27>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 166 4>; + }; + }; + L2: l2-cache@fffef000 { compatible = "arm,pl310-cache"; reg = <0xfffef000 0x1000>; @@ -508,24 +636,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 167 4>; reg = <0xffc08000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer1: timer1@ffc09000 { compatible = "snps,dw-apb-timer"; interrupts = <0 168 4>; reg = <0xffc09000 0x1000>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 169 4>; reg = <0xffd00000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; timer3: timer3@ffd01000 { compatible = "snps,dw-apb-timer"; interrupts = <0 170 4>; reg = <0xffd01000 0x1000>; + clocks = <&osc1>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -534,6 +670,7 @@ interrupts = <0 162 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; uart1: serial1@ffc03000 { @@ -542,13 +679,58 @@ interrupts = <0 163 4>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; }; - rstmgr@ffd05000 { + rst: rstmgr@ffd05000 { compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0xffff>; + interrupts = <0 125 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0xffff>; + interrupts = <0 128 4>; + clocks = <&usb_mp_clk>; + clock-names = "otg"; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd02000 { + compatible = "snps,dw-wdt"; + reg = <0xffd02000 0x1000>; + interrupts = <0 171 4>; + clocks = <&osc1>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd03000 { + compatible = "snps,dw-wdt"; + reg = <0xffd03000 0x1000>; + interrupts = <0 172 4>; + clocks = <&osc1>; + status = "disabled"; + }; + sysmgr: sysmgr@ffd08000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd08000 0x4000>; diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi index 6c87b7070ca7..12d1c2ccaf5b 100644 --- a/arch/arm/boot/dts/socfpga_arria5.dtsi +++ b/arch/arm/boot/dts/socfpga_arria5.dtsi @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -38,32 +38,8 @@ }; }; - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; - - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index a87ee1c07661..d532d171e391 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_arria5.dtsi" +#include "socfpga_arria5.dtsi" / { model = "Altera SOCFPGA Arria V SoC Development Kit"; @@ -59,3 +59,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi index ca41b0ebf461..bf511828729f 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi +++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { soc { @@ -45,30 +45,6 @@ status = "okay"; }; - timer0@ffc08000 { - clock-frequency = <100000000>; - }; - - timer1@ffc09000 { - clock-frequency = <100000000>; - }; - - timer2@ffd00000 { - clock-frequency = <25000000>; - }; - - timer3@ffd01000 { - clock-frequency = <25000000>; - }; - - serial0@ffc02000 { - clock-frequency = <100000000>; - }; - - serial1@ffc03000 { - clock-frequency = <100000000>; - }; - sysmgr@ffd08000 { cpu1-start-addr = <0xffd080c4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index ae16d975196d..45de1514af0a 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Altera SOCFPGA Cyclone V SoC Development Kit"; @@ -52,3 +52,22 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index b79e2a2bf175..d26f155f5fd9 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -15,7 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -/include/ "socfpga_cyclone5.dtsi" +#include "socfpga_cyclone5.dtsi" / { model = "Terasic SoCkit"; @@ -52,3 +52,7 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts new file mode 100644 index 000000000000..a1814b457450 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2014 Steffen Trumtrar <s.trumtrar@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" + +/ { + model = "EBV SOCrates"; + compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; +}; + +&gmac1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t82"; + reg = <0x68>; + }; +}; + +&mmc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts index 87d6f759a9c1..09792b411110 100644 --- a/arch/arm/boot/dts/socfpga_vt.dts +++ b/arch/arm/boot/dts/socfpga_vt.dts @@ -16,7 +16,7 @@ */ /dts-v1/; -/include/ "socfpga.dtsi" +#include "socfpga.dtsi" / { model = "Altera SOCFPGA VT"; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 229508750890..651c56d400a4 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -38,8 +38,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; cd-gpios = <&gpio7 6 0x4>; // 230 @@ -63,7 +63,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; status = "okay"; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6cb9b68e2188..bf8f0eddc2c0 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -116,8 +116,15 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + full-pwr-cycle; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -132,6 +139,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + non-removable; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi1_default_mode>; pinctrl-1 = <&sdi1_sleep_mode>; @@ -144,7 +152,9 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; + vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi2_default_mode>; pinctrl-1 = <&sdi2_sleep_mode>; @@ -157,7 +167,8 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; + non-removable; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 5acc0449676a..d316c955bd5f 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -840,8 +840,8 @@ interrupts = <22>; max-frequency = <48000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio3 15 0x1>; cd-inverted; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index a2f632d0be2a..474ef83229cd 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -156,7 +156,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; @@ -195,7 +195,7 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; - mmc-cap-mmc-highspeed; + cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi4_default_mode>; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 6fe688e9e4da..82a661677e97 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -442,8 +442,8 @@ clock-names = "apb_pclk", "mclk"; max-frequency = <24000000>; bus-width = <4>; // SD-card slot - mmc-cap-mmc-highspeed; - mmc-cap-sd-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; cd-gpios = <&gpio 12 0x4>; cd-inverted; vmmc-supply = <&ab3100_ldo_g_reg>; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts new file mode 100644 index 000000000000..fe69f92e5f82 --- /dev/null +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih407.dtsi" +/ { + model = "STiH407 B2120"; + compatible = "st,stih407-b2120", "st,stih407"; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi new file mode 100644 index 000000000000..800f46f009f3 --- /dev/null +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm-periph-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi new file mode 100644 index 000000000000..402844cb3152 --- /dev/null +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -0,0 +1,615 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + + aliases { + /* 0-5: PIO_SBC */ + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + /* 10-19: PIO_FRONT0 */ + gpio6 = &pio10; + gpio7 = &pio11; + gpio8 = &pio12; + gpio9 = &pio13; + gpio10 = &pio14; + gpio11 = &pio15; + gpio12 = &pio16; + gpio13 = &pio17; + gpio14 = &pio18; + gpio15 = &pio19; + /* 20: PIO_FRONT1 */ + gpio16 = &pio20; + /* 30-35: PIO_REAR */ + gpio17 = &pio30; + gpio18 = &pio31; + gpio19 = &pio32; + gpio20 = &pio33; + gpio21 = &pio34; + gpio22 = &pio35; + /* 40-42: PIO_FLASH */ + gpio23 = &pio40; + gpio24 = &pio41; + gpio25 = &pio42; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + reg = <0x0961f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09610000 0x6000>; + + pio0: gpio@09610000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO0"; + }; + pio1: gpio@09611000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + pio2: gpio@09612000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + pio3: gpio@09613000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + pio4: gpio@09614000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + pio5: gpio@09615000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO5"; + }; + + rc { + pinctrl_ir: ir0 { + st,pins { + ir = <&pio4 0 ALT2 IN>; + }; + }; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0 { + pinctrl_sbc_serial0: sbc_serial0-0 { + st,pins { + tx = <&pio3 4 ALT1 OUT>; + rx = <&pio3 5 ALT1 IN>; + }; + }; + }; + /* SBC_ASC1 - UART11 */ + sbc_serial1 { + pinctrl_sbc_serial1: sbc_serial1-0 { + st,pins { + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; + }; + }; + }; + + i2c10 { + pinctrl_i2c10_default: i2c10-default { + st,pins { + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; + }; + }; + }; + + i2c11 { + pinctrl_i2c11_default: i2c11-default { + st,pins { + sda = <&pio5 1 ALT1 BIDIR>; + scl = <&pio5 0 ALT1 BIDIR>; + }; + }; + }; + + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&pio4 0 ALT6 IN>; + keyin1 = <&pio4 5 ALT4 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio4 6 ALT4 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; + }; + }; + }; + + gmac1 { + /* + * Almost all the boards based on STiH407 SoC have an embedded + * switch where the mdio/mdc have been used for managing the SMI + * iface via I2C. For this reason these lines can be allocated + * by using dedicated configuration (in case of there will be a + * standard PHY transceiver on-board). + */ + pinctrl_rgmii1: rgmii1-0 { + st,pins { + + txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + }; + }; + + pinctrl_rgmii1_mdio: rgmii1-mdio { + st,pins { + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + }; + }; + + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; + }; + + pin-controller-front0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0920f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09200000 0x10000>; + + pio10: pio@09200000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO10"; + }; + pio11: pio@09201000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO11"; + }; + pio12: pio@09202000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO12"; + }; + pio13: pio@09203000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO13"; + }; + pio14: pio@09204000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO14"; + }; + pio15: pio@09205000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO15"; + }; + pio16: pio@09206000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x100>; + st,bank-name = "PIO16"; + }; + pio17: pio@09207000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x100>; + st,bank-name = "PIO17"; + }; + pio18: pio@09208000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x100>; + st,bank-name = "PIO18"; + }; + pio19: pio@09209000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x100>; + st,bank-name = "PIO19"; + }; + + /* Comms */ + serial0 { + pinctrl_serial0: serial0-0 { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + }; + + serial1 { + pinctrl_serial1: serial1-0 { + st,pins { + tx = <&pio16 0 ALT1 OUT>; + rx = <&pio16 1 ALT1 IN>; + }; + }; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&pio15 0 ALT1 OUT>; + rx = <&pio15 1 ALT1 IN>; + }; + }; + }; + + mmc1 { + pinctrl_sd1: sd1-0 { + st,pins { + sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>; + sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>; + sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>; + sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>; + sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>; + sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>; + sd_led = <&pio16 6 ALT6 OUT>; + sd_pwren = <&pio16 7 ALT6 OUT>; + sd_cd = <&pio19 0 ALT6 IN>; + sd_wp = <&pio19 1 ALT6 IN>; + }; + }; + }; + + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&pio10 6 ALT2 BIDIR>; + scl = <&pio10 5 ALT2 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&pio11 1 ALT2 BIDIR>; + scl = <&pio11 0 ALT2 BIDIR>; + }; + }; + }; + + i2c2 { + pinctrl_i2c2_default: i2c2-default { + st,pins { + sda = <&pio15 6 ALT2 BIDIR>; + scl = <&pio15 5 ALT2 BIDIR>; + }; + }; + }; + + i2c3 { + pinctrl_i2c3_default: i2c3-default { + st,pins { + sda = <&pio18 6 ALT1 BIDIR>; + scl = <&pio18 5 ALT1 BIDIR>; + }; + }; + }; + + spi0 { + pinctrl_spi0_default: spi0-default { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR>; + mrst = <&pio12 7 ALT2 BIDIR>; + scl = <&pio12 5 ALT2 BIDIR>; + }; + }; + }; + }; + + pin-controller-front1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0921f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09210000 0x10000>; + + pio20: pio@09210000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO20"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + reg = <0x0922f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09220000 0x6000>; + + pio30: gpio@09220000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO30"; + }; + pio31: gpio@09221000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO31"; + }; + pio32: gpio@09222000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO32"; + }; + pio33: gpio@09223000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO33"; + }; + pio34: gpio@09224000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO34"; + }; + pio35: gpio@09225000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO35"; + }; + + i2c4 { + pinctrl_i2c4_default: i2c4-default { + st,pins { + sda = <&pio30 1 ALT1 BIDIR>; + scl = <&pio30 0 ALT1 BIDIR>; + }; + }; + }; + + i2c5 { + pinctrl_i2c5_default: i2c5-default { + st,pins { + sda = <&pio34 4 ALT1 BIDIR>; + scl = <&pio34 3 ALT1 BIDIR>; + }; + }; + }; + + usb3 { + pinctrl_usb3: usb3-2 { + st,pins { + usb-oc-detect = <&pio35 4 ALT1 IN>; + usb-pwr-enable = <&pio35 5 ALT1 OUT>; + usb-vbus-valid = <&pio35 6 ALT1 IN>; + }; + }; + }; + + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio31 1 ALT1 OUT>; + }; + }; + }; + }; + + pin-controller-flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-flash-pinctrl"; + st,syscfg = <&syscfg_flash>; + reg = <0x0923f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09230000 0x3000>; + + pio40: gpio@09230000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO40"; + }; + pio41: gpio@09231000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO41"; + }; + pio42: gpio@09232000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO42"; + }; + + mmc0 { + pinctrl_mmc0: mmc0-0 { + st,pins { + emmc_clk = <&pio40 6 ALT1 BIDIR>; + emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>; + emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>; + emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>; + emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>; + emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>; + emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>; + emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>; + emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>; + emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 000000000000..4f9024f19866 --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,263 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-pinctrl.dtsi" +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@08761000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x08761000 0x1000>, <0x08760100 0x100>; + }; + + scu@08760000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x08760000 0x1000>; + }; + + timer@08760200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0x08760200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_periph_clk>; + }; + + l2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x08762000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc: sbc-syscfg@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + + syscfg_front: front-syscfg@9280000 { + compatible = "st,stih407-front-syscfg", "syscon"; + reg = <0x9280000 0x1000>; + }; + + syscfg_rear: rear-syscfg@9290000 { + compatible = "st,stih407-rear-syscfg", "syscon"; + reg = <0x9290000 0x1000>; + }; + + syscfg_flash: flash-syscfg@92a0000 { + compatible = "st,stih407-flash-syscfg", "syscon"; + reg = <0x92a0000 0x1000>; + }; + + syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { + compatible = "st,stih407-sbc-reg-syscfg", "syscon"; + reg = <0x9600000 0x1000>; + }; + + syscfg_core: core-syscfg@92b0000 { + compatible = "st,stih407-core-syscfg", "syscon"; + reg = <0x92b0000 0x1000>; + }; + + syscfg_lpm: lpm-syscfg@94b5100 { + compatible = "st,stih407-lpm-syscfg", "syscon"; + reg = <0x94b5100 0x1000>; + }; + + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9831000 { + compatible = "st,asc"; + reg = <0x9831000 0x2c>; + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial1>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9832000 { + compatible = "st,asc"; + reg = <0x9832000 0x2c>; + interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0: serial@9530000 { + compatible = "st,asc"; + reg = <0x9530000 0x2c>; + interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial0>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + serial@9531000 { + compatible = "st,asc"; + reg = <0x9531000 0x2c>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + i2c@9840000 { + compatible = "st,comms-ssc4-i2c"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x9840000 0x110>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@9841000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@9842000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + + status = "disabled"; + }; + + i2c@9843000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + + status = "disabled"; + }; + + i2c@9844000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + + status = "disabled"; + }; + + i2c@9845000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9845000 0x110>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + + status = "disabled"; + }; + + + /* SSCs on SBC */ + i2c@9540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + + status = "disabled"; + }; + + i2c@9541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts index d4af53160435..bdfbd3765db2 100644 --- a/arch/arm/boot/dts/stih415-b2000.dts +++ b/arch/arm/boot/dts/stih415-b2000.dts @@ -11,5 +11,5 @@ #include "stih41x-b2000.dtsi" / { model = "STiH415 B2000 Board"; - compatible = "st,stih415", "st,stih415-b2000"; + compatible = "st,stih415-b2000", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts index 442b019e9a3a..71903a87bd31 100644 --- a/arch/arm/boot/dts/stih415-b2020.dts +++ b/arch/arm/boot/dts/stih415-b2020.dts @@ -11,5 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH415 B2020 Board"; - compatible = "st,stih415", "st,stih415-b2020"; + compatible = "st,stih415-b2020", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi index d047dbc28d61..3ee34514bc4b 100644 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -5,48 +5,529 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih415-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator input to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; }; /* - * ARM Peripheral clock for timers + * ClockGenAs on SASG1 */ - arm_periph_clk: arm_periph_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <500000000>; + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + ""; /* clk-s-stac-sys */ + /* Remaining outputs unused */ + }; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * ClockGenAs on MPE41 */ - CLKS_ICN_REG_0: CLKS_ICN_REG_0 { + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-apb-pm", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-disp", + ""; /* Unused */ + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-icn-dmu-0", + "clk-m-icn-dmu-1", + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-eram", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-fdma-12", + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-lmi", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-icn-gpu", + "clk-m-icn-vdp-0"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-icn-vdp-1", + "clk-m-icn-vdp-2", + "clk-m-icn-vdp-3", + "clk-m-prv-t1-bus", + "clk-m-icn-vdp-4", + "clk-m-icn-reg-10", + "", /* Unused */ + ""; /* clk-m-icn-st231 */ + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; }; - CLKS_GMAC0_PHY: clockgenA1@7 { + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp-0", + "clk-m-icn-bdisp-1"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "", /* clk-m-icn-hqvdp0 */ + "", /* clk-m-icn-hqvdp1 */ + "clk-m-icn-compo", + "", /* clk-m-icn-vdpaux */ + "clk-m-icn-ts", + "clk-m-icn-reg-lp-10", + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = ""; /* Unused */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde00d8 { + reg = <0xfdde00d8 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde00d8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_GMAC0_PHY"; + compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde00d8 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; - CLKS_ETH1_PHY: clockgenA0@7 { + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_ETH1_PHY"; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 81df870e5ee6..8509a037ae21 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -102,6 +102,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d89064c20c8a..d6f254f302fe 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -82,7 +82,7 @@ interrupts = <0 197 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; }; /* SBC comms block ASCs in SASG1 */ @@ -91,7 +91,7 @@ status = "disabled"; reg = <0xfe531000 0x2c>; interrupts = <0 210 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; @@ -100,7 +100,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -113,7 +113,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,7 +126,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -139,7 +139,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -170,7 +170,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLKS_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -193,18 +193,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLKS_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { compatible = "st,comms-irb"; reg = <0xfe518000 0x234>; interrupts = <0 203 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; rx-mode = "infrared"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH415_IRB_SOFTRESET>; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, + <&softreset STIH415_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts index a5eb6eee10bf..488e80a5d69d 100644 --- a/arch/arm/boot/dts/stih416-b2000.dts +++ b/arch/arm/boot/dts/stih416-b2000.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "stih416.dtsi" #include "stih41x-b2000.dtsi" - / { - compatible = "st,stih416", "st,stih416-b2000"; model = "STiH416 B2000"; + compatible = "st,stih416-b2000", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts new file mode 100644 index 000000000000..ba0fa2caaf18 --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Lee Jones <lee.jones@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020 REV-E"; + compatible = "st,stih416-b2020", "st,stih416"; + + soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + + ethernet1: dwmac@fef08000 { + snps,reset-gpio = <&PIO0 7>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28da573a..4e2df66b99ea 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -11,6 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH416 B2020"; - compatible = "st,stih416", "st,stih416-b2020"; - + compatible = "st,stih416-b2020", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi index a6942c75cbbb..5b4fb838cddb 100644 --- a/arch/arm/boot/dts/stih416-clock.dtsi +++ b/arch/arm/boot/dts/stih416-clock.dtsi @@ -6,50 +6,751 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih416-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; + }; + + /* + * ClockGenAs on SASG2 + */ + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc-0", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + "clk-s-stac-sys", + "clk-s-card-mmc-1"; + /* Remaining outputs unused */ + }; + }; + + /* + * ClockGenAs on MPE42 + */ + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-fdma-12", + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-lmi", + "clk-m-vid-dmu-0"; + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-vid-dmu-1", + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-tx-icn-dmu-0", + "clk-m-tx-icn-dmu-1", + "clk-m-tx-icn-ts", + "clk-m-icn-vdp-0", + "clk-m-icn-vdp-1"; + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-vp8", + "", /* Unused */ + "clk-m-icn-reg-11", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-alt", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-rx-icn-dmu-0", + "clk-m-rx-icn-dmu-1"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-rx-icn-ts", + "clk-m-rx-icn-vdp-0", + "", /* Unused */ + "clk-m-prv-t1-bus", + "clk-m-icn-reg-12", + "clk-m-icn-reg-10", + "", /* Unused */ + "clk-m-icn-st231"; + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "clk-m-icn-reg-13", + "clk-m-tx-icn-gpu", + "clk-m-rx-icn-gpu", + "", /* Unused */ + "", /* Unused */ + "", /* clk-m-apb-pm-12 */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* clk-m-gpu-alt */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; + }; + + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp", + "clk-m-icn-compo"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-icn-vdp-2", + "", /* Unused */ + "clk-m-icn-reg-14", + "clk-m-mdtp", + "clk-m-jpegdec", + "", /* Unused */ + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + ""; /* clk-m-apb-pm-11 */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde08b0 { + reg = <0xfdde08b0 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde08ac { + #clock-cells = <0>; + compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde08ac 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm_periph_clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * Frequency synthesizers on the SASG2 */ - CLK_S_ICN_REG_0: clockgenA0@4 { + clockgen_b0: clockgen-b0@fee108b4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee108b4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-usb48", + "clk-s-dss", + "clk-s-stfe-frc-2", + "clk-s-thsens-scard"; + }; + + clockgen_b1: clockgen-b1@fe8308c4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfe8308c4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-pcm-0", + "clk-s-pcm-1", + "clk-s-pcm-2", + "clk-s-pcm-3"; + }; + + clockgen_c: clockgen-c@fe8307d0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs432", "st,quadfs"; + reg = <0xfe8307d0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-c-fs0-ch0", + "clk-s-c-vcc-sd", + "clk-s-c-fs0-ch2"; + }; + + clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - clock-output-names = "CLK_S_ICN_REG_0"; + compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; + reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ + + clocks = <&clk_sysin>, + <&clockgen_c 0>; }; - CLK_S_GMAC0_PHY: clockgenA1@7 { + /* + * Add a dummy clock for the HDMI PHY for the VCC input mux + */ + clk_s_tmds_fromphy: clk-s-tmds-fromphy { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_GMAC0_PHY"; + clock-frequency = <0>; + }; + + clockgen_c_vcc: clockgen-c-vcc@fe8308ac { + #clock-cells = <1>; + compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; + reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ + + clocks = <&clk_s_vcc_hd>, + <&clockgen_c 1>, + <&clk_s_tmds_fromphy>, + <&clockgen_c 2>; + + clock-output-names = "clk-s-pix-hdmi", + "clk-s-pix-dvo", + "clk-s-out-dvo", + "clk-s-pix-hd", + "clk-s-hddac", + "clk-s-denc", + "clk-s-sddac", + "clk-s-pix-main", + "clk-s-pix-aux", + "clk-s-stfe-frc-0", + "clk-s-ref-mcru", + "clk-s-slave-mcru", + "clk-s-tmds-hdmi", + "clk-s-hdmi-reject-pll", + "clk-s-thsens"; }; - CLK_S_ETH1_PHY: clockgenA0@7 { + clockgen_d: clockgen-d@fee107e0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee107e0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-ccsc", + "clk-s-stfe-frc-1", + "clk-s-tsout-1", + "clk-s-mchi"; + }; + + /* + * Frequency synthesizers on the MPE42 + */ + clockgen_e: clockgen-e@fd3208bc { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-E", "st,quadfs"; + reg = <0xfd3208bc 0xb0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-pix-mdtp-0", + "clk-m-pix-mdtp-1", + "clk-m-pix-mdtp-2", + "clk-m-mpelpc"; + }; + + clockgen_f: clockgen-f@fd320878 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-F", "st,quadfs"; + reg = <0xfd320878 0xf0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-main-vidfs", + "clk-m-hva-fs", + "clk-m-fvdp-vcpu", + "clk-m-fvdp-proc-fs"; + }; + + clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; + reg = <0xfd320910 0x4>; /* SYSCFG8580 */ + + clocks = <&clk_m_a1_div2 0>, + <&clockgen_f 3>; + }; + + clk_m_hva: clk-m-hva@fd690868 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; + reg = <0xfd690868 0x4>; /* SYSCFG9538 */ + + clocks = <&clockgen_f 1>, + <&clk_m_a1_div0 3>; + }; + + clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 7>, + <&clockgen_f 0>; + }; + + clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 8>, + <&clockgen_f 1>; + }; + + /* + * Add a dummy clock for the HDMIRx external signal clock + */ + clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_ETH1_PHY"; + clock-frequency = <0>; + }; + + clockgen_f_vcc: clockgen-f-vcc@fd32086c { + #clock-cells = <1>; + compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; + reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ + + clocks = <&clk_m_f_vcc_hd>, + <&clk_m_f_vcc_sd>, + <&clockgen_f 0>, + <&clk_m_pix_hdmirx_sas>; + + clock-output-names = "clk-m-pix-main-pipe", + "clk-m-pix-aux-pipe", + "clk-m-pix-main-cru", + "clk-m-pix-aux-cru", + "clk-m-xfer-be-compo", + "clk-m-xfer-pip-compo", + "clk-m-xfer-aux-compo", + "clk-m-vsens", + "clk-m-pix-hdmirx-0", + "clk-m-pix-hdmirx-1"; + }; + + /* + * DDR PLL + */ + clockgen-ddr@0xfdde07d8 { + reg = <0xfdde07d8 0x110>; + + clockgen_ddr_pll: clockgen-ddr-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-ddr0", + "clockgen-ddr1"; + }; + }; + + /* + * GPU PLL + */ + clockgen-gpu@fd68ff00 { + reg = <0xfd68ff00 0x910>; + + clockgen_gpu_pll: clockgen-gpu-pll { + #clock-cells = <1>; + compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-gpu-pll"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 250d5ecc951e..ee6c119e261e 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -122,6 +122,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 78746d20382e..06473c5d9ea9 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -89,7 +89,7 @@ status = "disabled"; reg = <0xfed32000 0x2c>; interrupts = <0 197 0>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; @@ -102,14 +102,14 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; }; i2c@fed40000 { compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -122,7 +122,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -135,7 +135,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -148,7 +148,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -176,7 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLK_S_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -198,7 +198,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLK_S_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { @@ -206,7 +206,7 @@ reg = <0xfe518000 0x234>; interrupts = <0 203 0>; rx-mode = "infrared"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH416_IRB_SOFTRESET>; @@ -224,5 +224,17 @@ status = "disabled"; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, + <&softreset STIH416_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index bf65c49095af..b3dd6ca5c2ae 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -6,6 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> / { memory{ @@ -14,7 +15,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &serial2; }; @@ -68,5 +69,27 @@ snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; + + keyscan: keyscan@fe4b0000 { + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce-us = <5000>; + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 838513f9ddc0..d8a84295c328 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -14,7 +14,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial1; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index f5b9898d9c6e..5cb0e63376b5 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -1,3 +1,10 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index fa746aea5e66..0b97c071dd56 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4684cbe6843b..c200eacc66e8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d7c17e46ce23..547fadcb984b 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -36,6 +36,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index fe9272ee55c3..f13723e18b86 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -24,6 +24,16 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index dd84a9e313b3..c01cea50cf0c 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -20,6 +20,16 @@ compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 66cf0c7cf5b7..d46a7dbecef5 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -33,6 +33,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 255b47e7019c..fb03bccb78d2 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -34,6 +34,16 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 9174724571e2..c7b794ed337d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -377,6 +377,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun4i-a10-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <35>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun4i-a10-usb-phy"; @@ -477,6 +513,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -529,6 +579,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; }; timer@01c20c00 { @@ -549,6 +613,14 @@ interrupts = <24>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun4i-a10-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; @@ -647,6 +719,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -656,6 +730,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -665,6 +741,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 23611b71d3aa..ea9519da5764 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -35,6 +35,26 @@ }; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -49,6 +69,20 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PE3"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts new file mode 100644 index 000000000000..43a93762d4f2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a10s.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "R7 A10s hdmi tv-stick"; + compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-inverted; + status = "okay"; + }; + + mmc1: mmc@01c10000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_r7>; + + green { + label = "r7-tv-dongle:green:usr"; + gpios = <&pio 1 2 0>; + default-state = "on"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 79989ed5658d..aa1dd59dc34a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -338,6 +338,33 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <33>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -451,6 +478,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; + allwinner,function = "mmc1"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 11169d5b5b86..fa44b026483b 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -21,6 +21,16 @@ compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -35,6 +45,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxinom: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 7a9187bbeb28..429994e1943e 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -20,6 +20,16 @@ compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; @@ -34,6 +44,13 @@ }; pinctrl@01c20800 { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PG9"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f01c315bdc4b..c9fdb7b3ecd9 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -320,6 +320,24 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <32>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <34>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun5i-a13-usb-phy"; @@ -415,6 +433,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -467,6 +492,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -476,6 +503,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -485,6 +514,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; timer@01c60000 { diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts new file mode 100644 index 000000000000..2bbf8867362b --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Boris Brezillon + * + * Boris Brezillon <boris.brezillon@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Allwinner A31 APP4 EVB1 Evaluation Board"; + compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + pio: pinctrl@01c20800 { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 3898a7bce831..546cf6eff5c7 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -13,6 +13,7 @@ /dts-v1/; /include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" / { model = "WITS A31 Colombus Evaluation Board"; @@ -23,6 +24,45 @@ }; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c19400 { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci1: usb@01c1b000 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_pins_a: mmc0@0 { + allwinner,pull = <1>; + }; + + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -47,4 +87,11 @@ status = "okay"; }; }; + + reg_usb2_vbus: usb2-vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 0>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts new file mode 100644 index 000000000000..bc6115da5ae1 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Mele M9 / A1000G Quad top set box"; + compatible = "mele,m9", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-inverted; + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index d45efa74827c..a9dfa12eb735 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -27,6 +27,7 @@ cpus { + enable-method = "allwinner,sun6i-a31"; #address-cells = <1>; #size-cells = <0>; @@ -59,6 +60,14 @@ reg = <0x40000000 0x80000000>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>, + <0 122 4>, + <0 123 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -198,6 +207,38 @@ "apb2_uart4", "apb2_uart5"; }; + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6>; + clock-output-names = "mmc3"; + }; + spi0_clk: clk@01c200a0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -229,6 +270,17 @@ clocks = <&osc24M>, <&pll6>; clock-output-names = "spi3"; }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2", + "usb_ohci0", "usb_ohci1", + "usb_ohci2"; + }; }; soc@01c00000 { @@ -237,12 +289,134 @@ #size-cells = <1>; ranges; - nmi_intc: interrupt-controller@01f00c0c { - compatible = "allwinner,sun6i-a31-sc-nmi"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x01f00c0c 0x38>; - interrupts = <0 32 4>; + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <0 60 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <0 61 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <0 62 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb1_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + resets = <&ahb1_rst 11>; + reset-names = "ahb"; + interrupts = <0 63 4>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun6i-a31-usb-phy"; + reg = <0x01c19400 0x10>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>; + reg-names = "phy_ctrl", + "pmu1", + "pmu2"; + clocks = <&usb_clk 8>, + <&usb_clk 9>, + <&usb_clk 10>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy"; + resets = <&usb_clk 0>, + <&usb_clk 1>, + <&usb_clk 2>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@01c1a000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <0 72 4>; + clocks = <&ahb1_gates 26>; + resets = <&ahb1_rst 26>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <0 73 4>; + clocks = <&ahb1_gates 29>, <&usb_clk 16>; + resets = <&ahb1_rst 29>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun6i-a31-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <0 74 4>; + clocks = <&ahb1_gates 27>; + resets = <&ahb1_rst 27>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <0 75 4>; + clocks = <&ahb1_gates 30>, <&usb_clk 17>; + resets = <&ahb1_rst 30>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun6i-a31-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <0 77 4>; + clocks = <&ahb1_gates 31>, <&usb_clk 18>; + resets = <&ahb1_rst 31>; + status = "disabled"; }; pio: pinctrl@01c20800 { @@ -286,6 +460,13 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; ahb1_rst: reset@01c202c0 { @@ -330,6 +511,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 16>; resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -341,6 +524,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 17>; resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -352,6 +537,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 18>; resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -363,6 +550,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 19>; resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -374,6 +563,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 20>; resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -385,6 +576,8 @@ reg-io-width = <4>; clocks = <&apb2_gates 21>; resets = <&apb2_rst 21>; + dmas = <&dma 22>, <&dma 22>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -428,12 +621,25 @@ status = "disabled"; }; + timer@01c60000 { + compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 4>, + <0 52 4>, + <0 53 4>, + <0 54 4>; + clocks = <&ahb1_gates 19>; + resets = <&ahb1_rst 19>; + }; + spi0: spi@01c68000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c68000 0x1000>; interrupts = <0 65 4>; clocks = <&ahb1_gates 20>, <&spi0_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 20>; status = "disabled"; }; @@ -444,6 +650,8 @@ interrupts = <0 66 4>; clocks = <&ahb1_gates 21>, <&spi1_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 21>; status = "disabled"; }; @@ -454,6 +662,8 @@ interrupts = <0 67 4>; clocks = <&ahb1_gates 22>, <&spi2_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 22>; status = "disabled"; }; @@ -464,6 +674,8 @@ interrupts = <0 68 4>; clocks = <&ahb1_gates 23>, <&spi3_clk>; clock-names = "ahb", "mod"; + dmas = <&dma 26>, <&dma 26>; + dma-names = "rx", "tx"; resets = <&ahb1_rst 23>; status = "disabled"; }; @@ -479,14 +691,74 @@ interrupts = <1 9 0xf04>; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = <0 32 4>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "allwinner,sun6i-a31-ar100-clk"; + #clock-cells = <0>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun6i-a31-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun6i-a31-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_ir", + "apb0_timer", "apb0_p2wi", + "apb0_uart", "apb0_1wire", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + cpucfg@01f01c00 { compatible = "allwinner,sun6i-a31-cpuconfig"; reg = <0x01f01c00 0x300>; }; - prcm@01f01c00 { - compatible = "allwinner,sun6i-a31-prcm"; - reg = <0x01f01400 0x200>; + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun6i-a31-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <0 45 4>, + <0 46 4>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 68de89ffbdfa..a5ad945197e8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -20,6 +20,16 @@ compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index cb25d3c8da58..b87fea901489 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -20,6 +20,25 @@ compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -48,6 +67,18 @@ }; pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -63,6 +94,12 @@ }; }; + pwm: pwm@01c20e00 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -139,4 +176,15 @@ reg_usb2_vbus: usb2-vbus { status = "okay"; }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_cubietruck>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 9 0>; + }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts new file mode 100644 index 000000000000..b77308e90199 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -0,0 +1,176 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "I12 / Q5 / QT840A A20 tvbox"; + compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i12_tvbox>; + + red { + label = "i12_tvbox:red:usr"; + gpios = <&pio 7 9 1>; + }; + + blue { + label = "i12_tvbox:blue:usr"; + gpios = <&pio 7 20 0>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_i12_tvbox>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 2 0>; + }; + + reg_vmmc3_io: vmmc3-io { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; + regulator-name = "vmmc3-io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* This controls VCC-PI, must be always on! */ + regulator-always-on; + enable-active-high; + gpio = <&pio 7 12 0>; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_i12_tvbox>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <50000>; + enable-active-high; + gpio = <&pio 7 21 0>; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index eeadf76362fa..b759630bc9a9 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -31,6 +31,26 @@ status = "okay"; }; + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-inverted; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -65,6 +85,13 @@ }; pinctrl@01c20800 { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + led_pins_olinuxino: led_pins@0 { allwinner,pins = "PH2"; allwinner,function = "gpio_out"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index aba1c8a3f388..385933bac114 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -57,6 +57,12 @@ <1 10 0xf08>; }; + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -455,6 +461,42 @@ #size-cells = <0>; }; + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 33 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 34 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 35 4>; + status = "disabled"; + }; + usbphy: phy@01c13400 { #phy-cells = <1>; compatible = "allwinner,sun7i-a20-usb-phy"; @@ -548,6 +590,20 @@ #size-cells = <0>; #gpio-cells = <3>; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PB22", "PB23"; allwinner,function = "uart0"; @@ -661,6 +717,27 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -686,6 +763,14 @@ interrupts = <0 24 4>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; @@ -784,6 +869,8 @@ clocks = <&apb1_gates 0>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c1: i2c@01c2b000 { @@ -793,6 +880,8 @@ clocks = <&apb1_gates 1>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c2: i2c@01c2b400 { @@ -802,6 +891,8 @@ clocks = <&apb1_gates 2>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c3: i2c@01c2b800 { @@ -811,6 +902,8 @@ clocks = <&apb1_gates 3>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; i2c4: i2c@01c2c000 { @@ -820,6 +913,8 @@ clocks = <&apb1_gates 15>; clock-frequency = <100000>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gmac: ethernet@01c50000 { diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index 18eeac0670b9..3d021efd1a38 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -72,4 +72,18 @@ gpio = <&pio 7 3 0>; status = "disabled"; }; + + reg_vcc3v0: vcc3v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index a288a12823ed..5c21d216515a 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -25,6 +25,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&vdd_hdmi_reg>; pll-supply = <&palmas_smps3_reg>; @@ -36,6 +37,8 @@ dsi@54300000 { status = "okay"; + avdd-dsi-csi-supply = <&avdd_1v2_reg>; + panel@0 { compatible = "panasonic,vvx10f004b00", "simple-panel"; @@ -982,12 +985,10 @@ regulator-max-microvolt = <2800000>; }; - ldo3 { + avdd_1v2_reg: ldo3 { regulator-name = "avdd-dsi-csi"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; }; ldo4 { @@ -1105,6 +1106,7 @@ sdhci@78000400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; bus-width = <4>; status = "okay"; }; @@ -1231,8 +1233,6 @@ regulator-name = "vdd_hdmi_5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; vin-supply = <&tps65090_dcdc1_reg>; }; @@ -1245,6 +1245,17 @@ enable-active-high; gpio = <&palmas_gpio 6 0>; }; + + vdd_5v0_hdmi: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&tps65090_dcdc1_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts new file mode 100644 index 000000000000..0b0e8e07d965 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -0,0 +1,1113 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "NVIDIA SHIELD"; + compatible = "nvidia,roth", "nvidia,tegra114"; + + chosen { + /* SHIELD's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1"; + /* SHIELD's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x79600000 is reserved for firmware usage */ + reg = <0x80000000 0x79600000>; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1", + "ulpi_nxt_py2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0", + "pbb0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_a17_pb0 { + nvidia,pins = "gmi_a17_pb0", + "gmi_a18_pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad5_pg5 { + nvidia,pins = "gmi_ad5_pg5", + "gmi_wr_n_pi0"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad6_pg6 { + nvidia,pins = "gmi_ad6_pg6", + "gmi_ad7_pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad12_ph4 { + nvidia,pins = "gmi_ad12_ph4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs6_n_pi13 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad9_ph1 { + nvidia,pins = "gmi_ad9_ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_cs1_n_pj2 { + nvidia,pins = "gmi_cs1_n_pj2", + "gmi_oe_n_pi1"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_iordy_pi5 { + nvidia,pins = "gmi_iordy_pi5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "blink"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + sys_clk_req_pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "sysclk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_adv_n_pk0 { + nvidia,pins = "gmi_adv_n_pk0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_cs0_n_pj0 { + nvidia,pins = "gmi_cs0_n_pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4", + "gpio_x5_aud_px5"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb5", + "pbb6", + "pbb7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1", + "pcc2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad0_pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad1_pg1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad10_ph2 { + nvidia,pins = "gmi_ad10_ph2", + "gmi_ad12_ph4", + "gmi_ad15_ph7", + "gmi_cs3_n_pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad11_ph3 { + nvidia,pins = "gmi_ad11_ph3", + "gmi_ad13_ph5", + "gmi_ad8_ph0", + "gmi_clk_pk1", + "gmi_cs2_n_pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi_ad14_ph6 { + nvidia,pins = "gmi_ad14_ph6", + "gmi_cs0_n_pj0", + "gmi_cs4_n_pk2", + "gmi_cs7_n_pi6", + "gmi_dqs_p_pj3", + "gmi_wp_n_pc7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gmi_ad2_pg2 { + nvidia,pins = "gmi_ad2_pg2", + "gmi_ad3_pg3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3", + "kb_row4_pr4", + "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <36>; + nvidia,pull-up-strength = <20>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <2>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + }; + }; + + /* Usable on reworked devices only */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + regulator@43 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1520000>; + regulator-always-on; + regulator-boot-on; + }; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + regulators { + smps12 { + regulator-name = "vdd-ddr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps3 { + regulator-name = "vdd-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps457 { + regulator-name = "vdd-soc"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8 { + regulator-name = "avdd-pll-1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9 { + regulator-name = "vdd-2v85-emmc"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + smps10_out1 { + regulator-name = "vdd-fan"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out2 { + regulator-name = "vdd-5v0-sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "vdd-2v8-display"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "avdd-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-name = "avdd-hdmi-pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vdd-sensor-2v8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo8 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + ti,enable-ldo8-tracking; + }; + + vddio_sdmmc3: ldo9 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb { + regulator-name = "avdd-usb-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regen1 { + regulator-name = "rail-3v3"; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + regen2 { + regulator-name = "rail-5v0"; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* SD card */ + sdhci@78000400 { + status = "okay"; + bus-width = <4>; + vmmc-supply = <&vddio_sdmmc3>; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + /* External USB port (must be powered) */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + /* SHIELD controller */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + back { + label = "Back"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + home { + label = "Home"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + lcd_bl_en: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "lcd_bl_en"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_lcd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v8_ts"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>; + regulator-boot-on; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_3v3_ts"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_1v8_com"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vdd_1v8>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_3v3_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_sys>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts new file mode 100644 index 000000000000..963662145635 --- /dev/null +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -0,0 +1,348 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra114.dtsi" + +/ { + model = "Tegra Note 7"; + compatible = "nvidia,tn7", "nvidia,tegra114"; + + chosen { + /* TN7's bootloader's arguments need to be overridden */ + bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2"; + /* TN7's bootloader will place initrd at this address */ + linux,initrd-start = <0x82000000>; + linux,initrd-end = <0x82800000>; + }; + + firmware { + trusted-foundations { + compatible = "tlm,trusted-foundations"; + tlm,version-major = <2>; + tlm,version-minor = <8>; + }; + }; + + memory { + /* memory >= 0x37e00000 is reserved for firmware usage */ + reg = <0x80000000 0x37e00000>; + }; + + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + palmas: pmic@58 { + compatible = "ti,palmas"; + reg = <0x58>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + palmas_gpio: gpio { + compatible = "ti,palmas-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + pmic { + compatible = "ti,tps65913-pmic", "ti,palmas-pmic"; + + ldoln-in-supply = <&vdd_smps10_out2>; + + regulators { + smps123 { + regulator-name = "vd-cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45 { + regulator-name = "vd-soc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6 { + regulator-name = "va-lcd-hv"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7 { + regulator-name = "vd-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: smps8 { + regulator-name = "vs-pmu-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_2v9_sys: smps9 { + regulator-name = "vs-sys-2v9"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out1: smps10_out1 { + regulator-name = "vd-smps10-out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_smps10_out2: smps10_out2 { + regulator-name = "vd-smps10-out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1 { + regulator-name = "va-pllx"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v2_ap: ldo2 { + regulator-name = "va-ap-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "vd-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "vd-ts-hv"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5 { + regulator-name = "va-cam2-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo6 { + regulator-name = "va-sns-hv"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo7 { + regulator-name = "va-cam1-hv"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + ldo8 { + regulator-name = "va-ap-rtc"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + ti,enable-ldo8-tracking; + regulator-always-on; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "vi-sdcard"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + ldousb { + regulator-name = "avdd-usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldoln { + regulator-name = "va-hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; + + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 0>; + }; + + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + vmmc-supply = <&vdd_1v8>; + non-removable; + }; + + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + nvidia,xcvr-setup = <7>; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + /* Should be changed to "otg" once we have vbus_supply */ + /* As of now, USB devices need to be powered externally */ + dr_mode = "host"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 1 40000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + + power-supply = <&lcd_bl_en>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + volume_down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + volume_up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + /* FIXME: output of BQ24192 */ + vs_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "VS_SYS"; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd_bl_en: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "VDD_LCD_BL"; + regulator-min-microvolt = <16500000>; + regulator-max-microvolt = <16500000>; + gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vs_sys>; + regulator-boot-on; + }; + + vdd_lcd: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "VD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts new file mode 100644 index 000000000000..e31fb61a81d3 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -0,0 +1,1827 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124.dtsi" + +/ { + model = "NVIDIA Tegra124 Jetson TK1"; + compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@0,7000d000/pmic@40"; + rtc1 = "/rtc@0,7000e000"; + }; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + hdmi-supply = <&vdd_5v0_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + vdd-supply = <&vdd_3v3_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + pinmux: pinmux@0,70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pb1 { + nvidia,pins = "pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pc7 { + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg0 { + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg3 { + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph5 { + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi7 { + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk1 { + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk3 { + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk4 { + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk7 { + nvidia,pins = "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data0_po1 { + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data1_po2 { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data2_po3 { + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data3_po4 { + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap4_sclk_pp7 { + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col3_pq3 { + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "sys"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row5_pr5 { + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row7_pr7 { + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row14_ps6 { + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row16_pt0 { + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu0 { + nvidia,pins = "pu0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu1 { + nvidia,pins = "pu1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu2 { + nvidia,pins = "pu2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cd_n_pv2 { + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_wp_n_pv3 { + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + gpio_w2_aud_pw2 { + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x6_aud_px6 { + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vimclk2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "vgp3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pcc2 { + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_out_pee4 { + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_clk_lb_in_pee5 { + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "dp"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* DB9 serial port */ + serial@0,70006300 { + status = "okay"; + }; + + /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */ + i2c@0,7000c000 { + status = "okay"; + clock-frequency = <100000>; + + rt5639: audio-codec@1c { + compatible = "realtek,rt5639"; + reg = <0x1c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + }; + + eeprom@56 { + compatible = "atmel,24c02"; + reg = <0x56>; + pagesize = <8>; + }; + }; + + /* Expansion GEN2_I2C_* */ + i2c@0,7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion CAM_I2C_* */ + i2c@0,7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* HDMI DDC */ + hdmi_ddc: i2c@0,7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* Expansion PWR_I2C_*, on-board components */ + i2c@0,7000d000 { + status = "okay"; + clock-frequency = <400000>; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_5_6 { + pins = "gpio3", "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_5v0_sys>; + vsup-sd3-supply = <&vdd_5v0_sys>; + vsup-sd4-supply = <&vdd_5v0_sys>; + vsup-sd5-supply = <&vdd_5v0_sys>; + vin-ldo0-supply = <&vdd_1v35_lp0>; + vin-ldo1-6-supply = <&vdd_3v3_run>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <&vdd_3v3_sys>; + vin-ldo9-10-supply = <&vdd_5v0_sys>; + vin-ldo11-supply = <&vdd_3v3_run>; + + sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <1>; + }; + + vdd_1v35_lp0: sd2 { + regulator-name = "+1.35V_LP0(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "+1.35V_LP0(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05_run: sd4 { + regulator-name = "+1.05V_RUN"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+1.8V_VDDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "+1.05V_RUN_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,external-control = <1>; + }; + + ldo1 { + regulator-name = "+1.8V_RUN_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "+1.2V_GEN_AVDD"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+1.05V_LP0_VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "+2.8V_RUN_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo5 { + regulator-name = "+1.2V_RUN_CAM_FRONT"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vddio_sdmmc3: ldo6 { + regulator-name = "+VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "+1.05V_RUN_CAM_REAR"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "+3.3V_RUN_TOUCH"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "+2.8V_RUN_CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "+1.8V_RUN_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + /* Expansion TS_SPI_* */ + spi@0,7000d400 { + status = "okay"; + }; + + /* Internal SPI */ + spi@0,7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@0 { + compatible = "winbond,w25q32dw"; + reg = <0>; + spi-max-frequency = <20000000>; + }; + }; + + pmc@0,7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + /* SD card */ + sdhci@0,700b0400 { + status = "okay"; + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* eMMC */ + sdhci@0,700b0600 { + status = "okay"; + bus-width = <8>; + }; + + ahub@0,70300000 { + i2s@0,70301100 { + status = "okay"; + }; + }; + + /* mini-PCIe USB */ + usb@0,7d004000 { + status = "okay"; + }; + + usb-phy@0,7d004000 { + status = "okay"; + }; + + /* USB A connector */ + usb@0,7d008000 { + status = "okay"; + }; + + usb-phy@0,7d008000 { + status = "okay"; + vbus-supply = <&vdd_usb3_vbus>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; + + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; + + vdd_usb1_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "+USB0_VBUS_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb3_vbus: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_3v3_lp0: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-rt5640-jetson-tk1", + "nvidia,tegra-audio-rt5640"; + nvidia,model = "NVIDIA Tegra Jetson TK1"; + + nvidia,audio-routing = + "Headphones", "HPOR", + "Headphones", "HPOL", + "Mic Jack", "MICBIAS1", + "IN2P", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&rt5639>; + + nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_LOW>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c17283c04598..f0bb84244025 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -17,6 +17,18 @@ }; host1x@0,50000000 { + hdmi@0,54280000 { + status = "okay"; + + vdd-supply = <&vdd_3v3_hdmi>; + pll-supply = <&vdd_hdmi_pll>; + hdmi-supply = <&vdd_5v0_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + sor@0,54540000 { status = "okay"; @@ -601,7 +613,7 @@ clock-frequency = <100000>; }; - i2c@0,7000c700 { + hdmi_ddc: i2c@0,7000c700 { status = "okay"; clock-frequency = <100000>; }; @@ -700,7 +712,7 @@ regulator-boot-on; }; - sd4 { + vdd_1v05_run: sd4 { regulator-name = "+1.05V_RUN"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -931,9 +943,10 @@ sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; status = "okay"; bus-width = <4>; - vmmc-supply = <&vddio_sdmmc3>; + vqmmc-supply = <&vddio_sdmmc3>; }; sdhci@0,700b0600 { @@ -1060,6 +1073,8 @@ regulator-name = "+3.3V_RUN"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_3v3_sys>; @@ -1145,6 +1160,27 @@ enable-active-high; vin-supply = <&vdd_3v3_sys>; }; + + vdd_hdmi_pll: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; + + vdd_5v0_hdmi: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 6d540a025148..6e6bc4e8185c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -51,6 +51,18 @@ nvidia,head = <1>; }; + hdmi@0,54280000 { + compatible = "nvidia,tegra124-hdmi"; + reg = <0x0 0x54280000 0x0 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDMI>, + <&tegra_car TEGRA124_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + sor@0,54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 3fb1f50f6d46..f45aad688d9b 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -28,6 +28,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -724,6 +725,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_5v0_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e93fe45b7803..3189791a9289 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -40,6 +40,7 @@ hdmi@54280000 { status = "okay"; + hdmi-supply = <&vdd_5v0_hdmi>; vdd-supply = <&sys_3v3_reg>; pll-supply = <&vio_reg>; @@ -478,6 +479,17 @@ gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>; vin-supply = <&sys_3v3_reg>; }; + + vdd_5v0_hdmi: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "+VDD_5V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&sys_3v3_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts new file mode 100644 index 000000000000..7793abd5bef1 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -0,0 +1,205 @@ +/dts-v1/; + +#include "tegra30-colibri.dtsi" + +/ { + model = "Toradex Colibri T30 on Colibri Evaluation Board"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Colibri SSP */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + spidev0: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + sdhci@78000200 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usbc_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM<A> */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + clocks { + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwmb { + label = "PWM<B>"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + pwmc { + label = "PWM<C>"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + pwmd { + label = "PWM<D>"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + usbc_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbc_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_PEN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi new file mode 100644 index 000000000000..bf16f8e65627 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -0,0 +1,377 @@ +#include <dt-bindings/input/input.h> +#include "tegra30.dtsi" + +/* + * Toradex Colibri T30 Device Tree + * Compatible for Revisions 1.1B/1.1C/1.1D + */ +/ { + model = "Toradex Colibri T30"; + compatible = "toradex,colibri_t30", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Colibri BL_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri Backlight PWM<A> */ + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri CAN_INT */ + kb_row8_ps0 { + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * todays display need DE, disable LCD_M1 + */ + lcd_m1_pw1 { + nvidia,pins = "lcd_m1_pw1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Thermal alert, need to be disabled */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "sdmmc2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri SSP */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat6_pd3 { + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART_A */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_B */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri UART_C */ + uart2_rxd { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: unused */ + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* LDO3: unused */ + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + emmc: sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 1: USB2_DP/N -> AX88772B */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + nvidia,is-wired = <1>; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 86cfc7d15ca7..36ae9160b558 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -152,4 +152,10 @@ keypad,num-rows = <8>; keypad,num-columns = <8>; }; + + twl_madc: madc { + compatible = "ti,twl4030-madc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; }; diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index c353ef0a6ac7..3537ae5b2146 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -8,7 +8,7 @@ &twl { pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins>; + pinctrl-0 = <&twl4030_pins &twl4030_vpins>; }; &omap3_pmx_core { @@ -23,3 +23,20 @@ >; }; }; + +/* + * If your board is not using the I2C4 pins with twl4030, then don't include + * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode + * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and + * sys_nvmode2 signaling. + */ +&omap3_pmx_wkup { + twl4030_vpins: pinmux_twl4030_vpins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ + OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ + OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ + OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ + >; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0d..756c986995a3 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -74,8 +74,24 @@ v2m_sysreg: sysreg@010000 { compatible = "arm,vexpress-sysreg"; reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@020000 { @@ -113,8 +129,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x050000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -265,6 +281,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355b..ba856d604fb7 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -73,8 +73,24 @@ v2m_sysreg: sysreg@00000 { compatible = "arm,vexpress-sysreg"; reg = <0x00000 0x1000>; - gpio-controller; - #gpio-cells = <2>; + + v2m_led_gpios: sys_led@08 { + compatible = "arm,vexpress-sysreg,sys_led"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_mmc_gpios: sys_mci@48 { + compatible = "arm,vexpress-sysreg,sys_mci"; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_flash_gpios: sys_flash@4c { + compatible = "arm,vexpress-sysreg,sys_flash"; + gpio-controller; + #gpio-cells = <2>; + }; }; v2m_sysctl: sysctl@01000 { @@ -112,8 +128,8 @@ compatible = "arm,pl180", "arm,primecell"; reg = <0x05000 0x1000>; interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; + cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; max-frequency = <12000000>; vmmc-supply = <&v2m_fixed_3v3>; clocks = <&v2m_clk24mhz>, <&smbclk>; @@ -264,6 +280,58 @@ clock-output-names = "v2m:refclk32khz"; }; + leds { + compatible = "gpio-leds"; + + user@1 { + label = "v2m:green:user1"; + gpios = <&v2m_led_gpios 0 0>; + linux,default-trigger = "heartbeat"; + }; + + user@2 { + label = "v2m:green:user2"; + gpios = <&v2m_led_gpios 1 0>; + linux,default-trigger = "mmc0"; + }; + + user@3 { + label = "v2m:green:user3"; + gpios = <&v2m_led_gpios 2 0>; + linux,default-trigger = "cpu0"; + }; + + user@4 { + label = "v2m:green:user4"; + gpios = <&v2m_led_gpios 3 0>; + linux,default-trigger = "cpu1"; + }; + + user@5 { + label = "v2m:green:user5"; + gpios = <&v2m_led_gpios 4 0>; + linux,default-trigger = "cpu2"; + }; + + user@6 { + label = "v2m:green:user6"; + gpios = <&v2m_led_gpios 5 0>; + linux,default-trigger = "cpu3"; + }; + + user@7 { + label = "v2m:green:user7"; + gpios = <&v2m_led_gpios 6 0>; + linux,default-trigger = "cpu4"; + }; + + user@8 { + label = "v2m:green:user8"; + gpios = <&v2m_led_gpios 7 0>; + linux,default-trigger = "cpu5"; + }; + }; + mcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 15f98cbcb75a..a25c262326dc 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -312,6 +312,7 @@ arm,vexpress-sysreg,func = <12 0>; label = "A15 Pcore"; }; + power@1 { /* Total power for the three A7 cores */ compatible = "arm,vexpress-power"; @@ -322,14 +323,14 @@ energy@0 { /* Total energy for the two A15 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 0>; + arm,vexpress-sysreg,func = <13 0>, <13 1>; label = "A15 Jcore"; }; energy@2 { /* Total energy for the three A7 cores */ compatible = "arm,vexpress-energy"; - arm,vexpress-sysreg,func = <13 2>; + arm,vexpress-sysreg,func = <13 2>, <13 3>; label = "A7 Jcore"; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a5504591..d2709b73316b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -88,6 +88,14 @@ interrupts = <1 13 0x304>; }; + timer@2c000200 { + compatible = "arm,cortex-a5-global-timer", + "arm,cortex-a9-global-timer"; + reg = <0x2c000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&oscclk0>; + }; + watchdog@2c000620 { compatible = "arm,cortex-a5-twd-wdt"; reg = <0x2c000620 0x20>; @@ -120,7 +128,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - osc@0 { + oscclk0: osc@0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts new file mode 100644 index 000000000000..aecc7dbc65e8 --- /dev/null +++ b/arch/arm/boot/dts/vf610-colibri.dts @@ -0,0 +1,123 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "Toradex Colibri VF61 COM"; + compatible = "toradex,vf610-colibri", "fsl,vf610"; + + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + memory { + reg = <0x80000000 0x10000000>; + }; + + clocks { + enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&L2 { + arm,data-latency = <2 1 2>; + arm,tag-latency = <3 2 3>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index ded361075aab..11d733406c7e 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -113,6 +113,13 @@ }; }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec0 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -160,6 +167,18 @@ >; }; + pinctrl_esdhc1: esdhc1grp { + fsl,fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTA7__GPIO_134 0x219d + >; + }; + pinctrl_fec0: fec0grp { fsl,pins = < VF610_PAD_PTA6__RMII_CLKIN 0x30d1 @@ -196,6 +215,17 @@ >; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1582 + VF610_PAD_PTB1__FTM0_CH1 0x1582 + VF610_PAD_PTB2__FTM0_CH2 0x1582 + VF610_PAD_PTB3__FTM0_CH3 0x1582 + VF610_PAD_PTB6__FTM0_CH6 0x1582 + VF610_PAD_PTB7__FTM0_CH7 0x1582 + >; + }; + pinctrl_sai2: sai2grp { fsl,pins = < VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed @@ -217,6 +247,12 @@ }; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + &sai2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index b8ce0aa7b157..6cc314e7b8fb 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -183,6 +183,19 @@ clock-names = "pit"; }; + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; @@ -347,6 +360,30 @@ status = "disabled"; }; + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x4000>; + interrupts = <0 28 0x04>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index c1176abc34d9..760bbc463c5b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Xilinx + * Copyright (C) 2011 - 2014 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -25,6 +25,7 @@ reg = <0>; clocks = <&clkc 3>; clock-latency = <1000>; + cpu0-supply = <®ulator_vccpint>; operating-points = < /* kHz uV */ 666667 1000000 @@ -48,6 +49,15 @@ reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; }; + regulator_vccpint: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCCPINT"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + amba { compatible = "simple-bus"; #address-cells = <1>; @@ -55,7 +65,7 @@ interrupt-parent = <&intc>; ranges; - i2c0: zynq-i2c@e0004000 { + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 38>; @@ -66,7 +76,7 @@ #size-cells = <0>; }; - i2c1: zynq-i2c@e0005000 { + i2c1: i2c@e0005000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; clocks = <&clkc 39>; @@ -80,7 +90,6 @@ intc: interrupt-controller@f8f01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; interrupt-controller; reg = <0xF8F01000 0x1000>, <0xF8F00100 0x100>; @@ -95,7 +104,7 @@ cache-level = <2>; }; - uart0: uart@e0000000 { + uart0: serial@e0000000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; @@ -104,7 +113,7 @@ interrupts = <0 27 4>; }; - uart1: uart@e0001000 { + uart1: serial@e0001000 { compatible = "xlnx,xuartps"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; @@ -131,7 +140,7 @@ clock-names = "pclk", "hclk", "tx_clk"; }; - sdhci0: ps7-sdhci@e0100000 { + sdhci0: sdhci@e0100000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -141,7 +150,7 @@ reg = <0xe0100000 0x1000>; } ; - sdhci1: ps7-sdhci@e0101000 { + sdhci1: sdhci@e0101000 { compatible = "arasan,sdhci-8.9a"; status = "disabled"; clock-names = "clk_xin", "clk_ahb"; @@ -177,6 +186,11 @@ }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; @@ -185,26 +199,27 @@ clocks = <&clkc 4>; }; - ttc0: ttc0@f8001000 { + ttc0: timer@f8001000 { interrupt-parent = <&intc>; - interrupts = < 0 10 4 0 11 4 0 12 4 >; + interrupts = <0 10 4>, <0 11 4>, <0 12 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; }; - ttc1: ttc1@f8002000 { + ttc1: timer@f8002000 { interrupt-parent = <&intc>; - interrupts = < 0 37 4 0 38 4 0 39 4 >; + interrupts = <0 37 4>, <0 38 4>, <0 39 4>; compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; }; - scutimer: scutimer@f8f00600 { + + scutimer: timer@f8f00600 { interrupt-parent = <&intc>; - interrupts = < 1 13 0x301 >; + interrupts = <1 13 0x301>; compatible = "arm,cortex-a9-twd-timer"; - reg = < 0xf8f00600 0x20 >; + reg = <0xf8f00600 0x20>; clocks = <&clkc 4>; } ; }; diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 5339009b3c0c..485be42519b9 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -102,7 +102,13 @@ #define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5)) #define EDMA_DCHMAP 0x0100 /* 64 registers */ -#define CHMAP_EXIST BIT(24) + +/* CCCFG register */ +#define GET_NUM_DMACH(x) (x & 0x7) /* bits 0-2 */ +#define GET_NUM_PAENTRY(x) ((x & 0x7000) >> 12) /* bits 12-14 */ +#define GET_NUM_EVQUE(x) ((x & 0x70000) >> 16) /* bits 16-18 */ +#define GET_NUM_REGN(x) ((x & 0x300000) >> 20) /* bits 20-21 */ +#define CHMAP_EXIST BIT(24) #define EDMA_MAX_DMACH 64 #define EDMA_MAX_PARAMENTRY 512 @@ -233,7 +239,6 @@ struct edma { unsigned num_region; unsigned num_slots; unsigned num_tc; - unsigned num_cc; enum dma_event_q default_queue; /* list of channels with no even trigger; terminated by "-1" */ @@ -290,12 +295,6 @@ static void map_dmach_queue(unsigned ctlr, unsigned ch_no, ~(0x7 << bit), queue_no << bit); } -static void __init map_queue_tc(unsigned ctlr, int queue_no, int tc_no) -{ - int bit = queue_no * 4; - edma_modify(ctlr, EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit)); -} - static void __init assign_priority_to_queue(unsigned ctlr, int queue_no, int priority) { @@ -994,29 +993,23 @@ void edma_set_dest(unsigned slot, dma_addr_t dest_port, EXPORT_SYMBOL(edma_set_dest); /** - * edma_get_position - returns the current transfer points + * edma_get_position - returns the current transfer point * @slot: parameter RAM slot being examined - * @src: pointer to source port position - * @dst: pointer to destination port position + * @dst: true selects the dest position, false the source * - * Returns current source and destination addresses for a particular - * parameter RAM slot. Its channel should not be active when this is called. + * Returns the position of the current active slot */ -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst) +dma_addr_t edma_get_position(unsigned slot, bool dst) { - struct edmacc_param temp; - unsigned ctlr; + u32 offs, ctlr = EDMA_CTLR(slot); - ctlr = EDMA_CTLR(slot); slot = EDMA_CHAN_SLOT(slot); - edma_read_slot(EDMA_CTLR_CHAN(ctlr, slot), &temp); - if (src != NULL) - *src = temp.src; - if (dst != NULL) - *dst = temp.dst; + offs = PARM_OFFSET(slot); + offs += dst ? PARM_DST : PARM_SRC; + + return edma_read(ctlr, offs); } -EXPORT_SYMBOL(edma_get_position); /** * edma_set_src_index - configure DMA source address indexing @@ -1421,6 +1414,67 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, + struct edma *edma_cc) +{ + int i; + u32 value, cccfg; + s8 (*queue_priority_map)[2]; + + /* Decode the eDMA3 configuration from CCCFG register */ + cccfg = edma_read(0, EDMA_CCCFG); + + value = GET_NUM_REGN(cccfg); + edma_cc->num_region = BIT(value); + + value = GET_NUM_DMACH(cccfg); + edma_cc->num_channels = BIT(value + 1); + + value = GET_NUM_PAENTRY(cccfg); + edma_cc->num_slots = BIT(value + 4); + + value = GET_NUM_EVQUE(cccfg); + edma_cc->num_tc = value + 1; + + dev_dbg(dev, "eDMA3 HW configuration (cccfg: 0x%08x):\n", cccfg); + dev_dbg(dev, "num_region: %u\n", edma_cc->num_region); + dev_dbg(dev, "num_channel: %u\n", edma_cc->num_channels); + dev_dbg(dev, "num_slot: %u\n", edma_cc->num_slots); + dev_dbg(dev, "num_tc: %u\n", edma_cc->num_tc); + + /* Nothing need to be done if queue priority is provided */ + if (pdata->queue_priority_mapping) + return 0; + + /* + * Configure TC/queue priority as follows: + * Q0 - priority 0 + * Q1 - priority 1 + * Q2 - priority 2 + * ... + * The meaning of priority numbers: 0 highest priority, 7 lowest + * priority. So Q0 is the highest priority queue and the last queue has + * the lowest priority. + */ + queue_priority_map = devm_kzalloc(dev, + (edma_cc->num_tc + 1) * sizeof(s8), + GFP_KERNEL); + if (!queue_priority_map) + return -ENOMEM; + + for (i = 0; i < edma_cc->num_tc; i++) { + queue_priority_map[i][0] = i; + queue_priority_map[i][1] = i; + } + queue_priority_map[i][0] = -1; + queue_priority_map[i][1] = -1; + + pdata->queue_priority_mapping = queue_priority_map; + pdata->default_queue = 0; + + return 0; +} + #if IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DMADEVICES) static int edma_xbar_event_map(struct device *dev, struct device_node *node, @@ -1471,65 +1525,16 @@ static int edma_of_parse_dt(struct device *dev, struct device_node *node, struct edma_soc_info *pdata) { - int ret = 0, i; - u32 value; + int ret = 0; struct property *prop; size_t sz; struct edma_rsv_info *rsv_info; - s8 (*queue_tc_map)[2], (*queue_priority_map)[2]; - - memset(pdata, 0, sizeof(struct edma_soc_info)); - - ret = of_property_read_u32(node, "dma-channels", &value); - if (ret < 0) - return ret; - pdata->n_channel = value; - - ret = of_property_read_u32(node, "ti,edma-regions", &value); - if (ret < 0) - return ret; - pdata->n_region = value; - - ret = of_property_read_u32(node, "ti,edma-slots", &value); - if (ret < 0) - return ret; - pdata->n_slot = value; - - pdata->n_cc = 1; rsv_info = devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL); if (!rsv_info) return -ENOMEM; pdata->rsv = rsv_info; - queue_tc_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_tc_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_tc_map[i][0] = i; - queue_tc_map[i][1] = i; - } - queue_tc_map[i][0] = -1; - queue_tc_map[i][1] = -1; - - pdata->queue_tc_mapping = queue_tc_map; - - queue_priority_map = devm_kzalloc(dev, 8*sizeof(s8), GFP_KERNEL); - if (!queue_priority_map) - return -ENOMEM; - - for (i = 0; i < 3; i++) { - queue_priority_map[i][0] = i; - queue_priority_map[i][1] = i; - } - queue_priority_map[i][0] = -1; - queue_priority_map[i][1] = -1; - - pdata->queue_priority_mapping = queue_priority_map; - - pdata->default_queue = 0; - prop = of_find_property(node, "ti,edma-xbar-event-map", &sz); if (prop) ret = edma_xbar_event_map(dev, node, pdata, sz); @@ -1556,6 +1561,7 @@ static struct edma_soc_info *edma_setup_info_from_dt(struct device *dev, return ERR_PTR(ret); dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap); + dma_cap_set(DMA_CYCLIC, edma_filter_info.dma_cap); of_dma_controller_register(dev->of_node, of_dma_simple_xlate, &edma_filter_info); @@ -1574,7 +1580,6 @@ static int edma_probe(struct platform_device *pdev) struct edma_soc_info **info = pdev->dev.platform_data; struct edma_soc_info *ninfo[EDMA_MAX_CC] = {NULL}; s8 (*queue_priority_mapping)[2]; - s8 (*queue_tc_mapping)[2]; int i, j, off, ln, found = 0; int status = -1; const s16 (*rsv_chans)[2]; @@ -1585,7 +1590,6 @@ static int edma_probe(struct platform_device *pdev) struct resource *r[EDMA_MAX_CC] = {NULL}; struct resource res[EDMA_MAX_CC]; char res_name[10]; - char irq_name[10]; struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; @@ -1650,12 +1654,10 @@ static int edma_probe(struct platform_device *pdev) if (!edma_cc[j]) return -ENOMEM; - edma_cc[j]->num_channels = min_t(unsigned, info[j]->n_channel, - EDMA_MAX_DMACH); - edma_cc[j]->num_slots = min_t(unsigned, info[j]->n_slot, - EDMA_MAX_PARAMENTRY); - edma_cc[j]->num_cc = min_t(unsigned, info[j]->n_cc, - EDMA_MAX_CC); + /* Get eDMA3 configuration from IP */ + ret = edma_setup_from_hw(dev, info[j], edma_cc[j]); + if (ret) + return ret; edma_cc[j]->default_queue = info[j]->default_queue; @@ -1707,14 +1709,21 @@ static int edma_probe(struct platform_device *pdev) if (node) { irq[j] = irq_of_parse_and_map(node, 0); + err_irq[j] = irq_of_parse_and_map(node, 2); } else { + char irq_name[10]; + sprintf(irq_name, "edma%d", j); irq[j] = platform_get_irq_byname(pdev, irq_name); + + sprintf(irq_name, "edma%d_err", j); + err_irq[j] = platform_get_irq_byname(pdev, irq_name); } edma_cc[j]->irq_res_start = irq[j]; - status = devm_request_irq(&pdev->dev, irq[j], - dma_irq_handler, 0, "edma", - &pdev->dev); + edma_cc[j]->irq_res_end = err_irq[j]; + + status = devm_request_irq(dev, irq[j], dma_irq_handler, 0, + "edma", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1722,16 +1731,8 @@ static int edma_probe(struct platform_device *pdev) return status; } - if (node) { - err_irq[j] = irq_of_parse_and_map(node, 2); - } else { - sprintf(irq_name, "edma%d_err", j); - err_irq[j] = platform_get_irq_byname(pdev, irq_name); - } - edma_cc[j]->irq_res_end = err_irq[j]; - status = devm_request_irq(&pdev->dev, err_irq[j], - dma_ccerr_handler, 0, - "edma_error", &pdev->dev); + status = devm_request_irq(dev, err_irq[j], dma_ccerr_handler, 0, + "edma_error", dev); if (status < 0) { dev_dbg(&pdev->dev, "devm_request_irq %d failed --> %d\n", @@ -1742,14 +1743,8 @@ static int edma_probe(struct platform_device *pdev) for (i = 0; i < edma_cc[j]->num_channels; i++) map_dmach_queue(j, i, info[j]->default_queue); - queue_tc_mapping = info[j]->queue_tc_mapping; queue_priority_mapping = info[j]->queue_priority_mapping; - /* Event queue to TC mapping */ - for (i = 0; queue_tc_mapping[i][0] != -1; i++) - map_queue_tc(j, queue_tc_mapping[i][0], - queue_tc_mapping[i][1]); - /* Event queue priority mapping */ for (i = 0; queue_priority_mapping[i][0] != -1; i++) assign_priority_to_queue(j, @@ -1762,7 +1757,7 @@ static int edma_probe(struct platform_device *pdev) if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST) map_dmach_param(j); - for (i = 0; i < info[j]->n_region; i++) { + for (i = 0; i < edma_cc[j]->num_region; i++) { edma_write_array2(j, EDMA_DRAE, i, 0, 0x0); edma_write_array2(j, EDMA_DRAE, i, 1, 0x0); edma_write_array(j, EDMA_QRAE, i, 0x0); diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index e181a50fd65a..c6661a60025d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y @@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 85f846ae9ff2..5d7797d43d23 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -65,6 +64,8 @@ CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig new file mode 100644 index 000000000000..d3260d7d5af1 --- /dev/null +++ b/arch/arm/configs/axm55xx_defconfig @@ -0,0 +1,248 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_AXXIA=y +CONFIG_GPIO_PCA953X=y +CONFIG_ARM_LPAE=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_643719=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_754327=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_AXXIA=y +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_HIGHMEM=y +CONFIG_KSM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=y +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_BRIDGE=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +CONFIG_TUN=y +CONFIG_VETH=y +CONFIG_VIRTIO_NET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_WLAN is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_AXXIA=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_DP83640_PHY=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PL061=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AXXIA=y +CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_JC42=y +CONFIG_SENSORS_LM75=y +CONFIG_PMBUS=y +CONFIG_SENSORS_LTC2978=y +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_AXXIA=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=y +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_FSCACHE_DEBUG=y +CONFIG_FSCACHE_OBJECT_LIST=y +CONFIG_CACHEFILES=y +CONFIG_CACHEFILES_HISTOGRAM=y +CONFIG_ISO9660_FS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFS_FSCACHE=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index 5b54abbeb0b3..0494c8f229a2 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -73,8 +73,6 @@ CONFIG_SA1100_WATCHDOG=m CONFIG_SOUND=y CONFIG_SOUND_PRIME=y CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 3df3f3a79ef4..9d13dae99125 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -91,6 +91,7 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y @@ -104,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_PWM=y +CONFIG_PWM_BCM_KONA=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig index a93ff8da5bab..dc01c049a520 100644 --- a/arch/arm/configs/cm_x2xx_defconfig +++ b/arch/arm/configs/cm_x2xx_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index f4b767256f95..7df040e91c1c 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -129,7 +129,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig index 2ef2c5e8aaec..18c311ae1113 100644 --- a/arch/arm/configs/colibri_pxa270_defconfig +++ b/arch/arm/configs/colibri_pxa270_defconfig @@ -124,7 +124,6 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_SERIAL=m CONFIG_USB_GADGET=m diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig index b985334e42dd..be02fe2b14cb 100644 --- a/arch/arm/configs/colibri_pxa300_defconfig +++ b/arch/arm/configs/colibri_pxa300_defconfig @@ -47,9 +47,7 @@ CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 1fd1d1de3220..c1470a00f55a 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -172,7 +172,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 2a282c051cfd..f95f72d62db7 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,10 +157,8 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_PERIPHERAL=y CONFIG_USB_GADGET_MUSB_HDRC=y CONFIG_MUSB_PIO_ONLY=y CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index f15955144175..701677f9248c 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -37,7 +37,6 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_JEDECPROBE=y @@ -48,6 +47,7 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig index 60a21e01eb70..4560c9ca6636 100644 --- a/arch/arm/configs/em_x270_defconfig +++ b/arch/arm/configs/em_x270_defconfig @@ -144,7 +144,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 6ac5ea73bd0a..1b650c85bdd0 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C_DEBUG_BUS=y CONFIG_WATCHDOG=y CONFIG_EP93XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 4ce7b70ea901..e07a227ec0db 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -65,6 +65,7 @@ CONFIG_TCG_TIS_I2C_INFINEON=y CONFIG_I2C=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y # CONFIG_HWMON is not set diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 038518ab39a8..87e020f303ab 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -100,8 +100,6 @@ CONFIG_FB_CYBER2000=y CONFIG_SOUND=m # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_PRINTER=m CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f1aeb7d72712..bada59d93b67 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_ATA=y +CONFIG_BLK_DEV_SD=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y @@ -153,8 +154,12 @@ CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -177,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 09e974392fa1..ef8815327e5b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,4 +1,3 @@ -# CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y @@ -33,7 +32,6 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y -CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y @@ -46,7 +44,11 @@ CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m @@ -72,6 +74,7 @@ CONFIG_RFKILL_INPUT=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set +CONFIG_DMA_CMA=y CONFIG_IMX_WEIM=y CONFIG_CONNECTOR=y CONFIG_MTD=y @@ -89,6 +92,7 @@ CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -183,6 +187,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y @@ -215,7 +220,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -245,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y -CONFIG_COMMON_CLK_DEBUG=y +CONFIG_DRM_IMX_HDMI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_IMX=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 063e2ab2c8f1..1af665e847d1 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -169,7 +169,6 @@ CONFIG_SENSORS_W83781D=y CONFIG_WATCHDOG=y CONFIG_IXP4XX_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index ec9a41d50680..095bb52671f6 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -135,7 +135,6 @@ CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y CONFIG_DAVINCI_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 2e762d94e94b..b9e480c10b10 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -61,6 +61,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 12bd1f63c399..bd097d455f87 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -106,7 +106,6 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_STORAGE=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index a07948a87caa..9c93f5655248 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -217,7 +217,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index c5858b9eb516..7f52dad97f51 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -17,21 +17,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y -CONFIG_ARCH_MSM_DT=y -CONFIG_ARCH_MSM8X60=y -CONFIG_ARCH_MSM8960=y -CONFIG_ARCH_MSM8974=y -CONFIG_SMP=y +CONFIG_ARCH_MSM=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y CONFIG_CLEANCACHE=y -CONFIG_CC_STACKPROTECTOR=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_AUTO_ZRELADDR=y CONFIG_VFP=y -CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y @@ -79,16 +72,12 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_MSM=y +# CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_POWER_SUPPLY=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y CONFIG_REGULATOR=y CONFIG_MEDIA_SUPPORT=y @@ -100,25 +89,17 @@ CONFIG_SND_DYNAMIC_MINORS=y # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set CONFIG_SND_SOC=y -CONFIG_HID_BATTERY_STRENGTH=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MSM=y CONFIG_USB_ACM=y CONFIG_USB_SERIAL=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_VBUS_DRAW=500 -CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y CONFIG_STAGING=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_MSM_GCC_8660=y -CONFIG_MSM_MMCC_8960=y -CONFIG_MSM_MMCC_8974=y -CONFIG_MSM_IOMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index aa3dfb084fed..5ebfa8bf8509 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -11,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_T5325=y CONFIG_ARCH_MXC=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_IMX27_DT=y @@ -108,6 +107,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_T5325=y +CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SIMPLE_CARD=y # CONFIG_ABX500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index d4e8a47a2f7c..e2d62048e198 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -5,9 +5,11 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_VIRT=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_ARMADA_370=y CONFIG_MACH_ARMADA_375=y @@ -15,12 +17,12 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y -CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BCM_MOBILE=y +CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y -CONFIG_GPIO_PCA953X=y +CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_KEYSTONE=y @@ -34,8 +36,8 @@ CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_SOC_OMAP5=y CONFIG_SOC_AM33XX=y -CONFIG_SOC_DRA7XX=y CONFIG_SOC_AM43XX=y +CONFIG_SOC_DRA7XX=y CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y @@ -47,6 +49,7 @@ CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y CONFIG_ARCH_STI=y +CONFIG_ARCH_EXYNOS=y CONFIG_ARCH_SUNXI=y CONFIG_ARCH_SIRF=y CONFIG_ARCH_TEGRA=y @@ -61,7 +64,6 @@ CONFIG_MACH_SNOWBALL=y CONFIG_MACH_UX500_DT=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_CA9X4=y -CONFIG_ARCH_VIRT=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y CONFIG_NEON=y @@ -71,6 +73,7 @@ CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_PCI_TEGRA=y CONFIG_SMP=y +CONFIG_NR_CPUS=8 CONFIG_HIGHPTE=y CONFIG_CMA=y CONFIG_ARM_APPENDED_DTB=y @@ -96,6 +99,11 @@ CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y +CONFIG_CAN_DEV=y +CONFIG_CAN_MCP251X=y CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_RFKILL=y @@ -112,15 +120,19 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_SUNXI_SID=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_SUNXI=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y @@ -153,6 +165,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DW=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_SIRFSOC=y CONFIG_SERIAL_SIRFSOC_CONSOLE=y CONFIG_SERIAL_TEGRA=y @@ -175,7 +189,9 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y @@ -184,6 +200,8 @@ CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_SIRF=y +CONFIG_SPI_SUN4I=y +CONFIG_SPI_SUN6I=y CONFIG_SPI_TEGRA114=y CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y @@ -191,6 +209,8 @@ CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TWL4030=y CONFIG_GPIO_PALMAS=y @@ -200,16 +220,19 @@ CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y CONFIG_DOVE_THERMAL=y CONFIG_ARMADA_THERMAL=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_SUNXI_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_SEC_CORE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y @@ -220,6 +243,8 @@ CONFIG_REGULATOR_AS3722=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_S2MPS11=y +CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS51632=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS65090=y @@ -254,10 +279,13 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_SND_SOC_TEGRA_MAX98090=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y @@ -272,20 +300,28 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_ESDHC_IMX=y -CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_DOVE=y +CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y +CONFIG_MMC_SUNXI=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_EXYNOS=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y CONFIG_EDAC_HIGHBANK_L2=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y @@ -294,6 +330,7 @@ CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_VT8500=y +CONFIG_RTC_DRV_SUNXI=y CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y CONFIG_DMADEVICES=y @@ -328,6 +365,7 @@ CONFIG_PWM=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_OMAP_USB2=y +CONFIG_PHY_SUN4I_USB=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 1f08219c1b3c..0dae1c1f007a 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -80,7 +80,6 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 36484a37a1ca..27c732fdf21e 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -1,4 +1,5 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 @@ -11,7 +12,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -50,6 +50,7 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set @@ -100,6 +101,8 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_KIRKWOOD_SOC_T5325=y +CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SIMPLE_CARD=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_HID_DRAGONRISE=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index a34713d8db9f..e11170e37442 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -1,5 +1,6 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +18,7 @@ CONFIG_NEON=y # CONFIG_CACHE_L2X0 is not set # CONFIG_SWP_EMULATE is not set CONFIG_PCI=y +CONFIG_PCI_MSI=y CONFIG_PCI_MVEBU=y CONFIG_SMP=y CONFIG_AEABI=y @@ -29,6 +31,9 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y CONFIG_BT=y CONFIG_BT_MRVL=y CONFIG_BT_MRVL_SDIO=y @@ -36,6 +41,7 @@ CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_SD=y CONFIG_ATA=y +CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y @@ -53,6 +59,7 @@ CONFIG_I2C_MV64XXX=y CONFIG_MTD=y CONFIG_MTD_CHAR=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y @@ -78,7 +85,9 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y CONFIG_MMC=y +CONFIG_MMC_SDHCI_PXAV3=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y CONFIG_LEDS_GPIO=y @@ -103,6 +112,8 @@ CONFIG_UDF_FS=m CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6150108e15de..a9f992335eb2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y # CONFIG_BLK_DEV is not set CONFIG_EEPROM_AT24=y @@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_MXS_LRADC=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y @@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set +CONFIG_CRYPTO_DEV_MXS_DCP=y CONFIG_CRC_ITU_T=m CONFIG_CRC7=m CONFIG_FONTS=y diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index d7dc9922cfff..460dca4a4f98 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -68,8 +68,6 @@ CONFIG_SOUND=y CONFIG_SOUND_PRIME=y # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index d74edbad18fc..ce541bb3c2de 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -197,8 +197,6 @@ CONFIG_SND_OMAP_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_PHY=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a4e8d017f25b..59066cf0271a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y @@ -42,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y CONFIG_NET=y @@ -159,11 +162,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y CONFIG_SENSORS_LM75=m CONFIG_THERMAL=y CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y @@ -177,6 +183,7 @@ CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -217,7 +224,6 @@ CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_WDM=y @@ -239,6 +245,7 @@ CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 2f136c30a989..0a847d04ddc1 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -76,7 +76,6 @@ CONFIG_SND_PCM_OSS=y CONFIG_SND_PXA2XX_AC97=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_MMC=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig new file mode 100644 index 000000000000..42ebd72799e6 --- /dev/null +++ b/arch/arm/configs/qcom_defconfig @@ -0,0 +1,165 @@ +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_SLUB_DEBUG is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_MSM8X60=y +CONFIG_ARCH_MSM8960=y +CONFIG_ARCH_MSM8974=y +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_CLEANCACHE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_RFKILL=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_SCSI_TGT=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_GPIO=y +CONFIG_SLIP=y +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_MODE_SLIP6=y +CONFIG_USB_USBNET=y +# CONFIG_USB_NET_AX8817X is not set +# CONFIG_USB_NET_ZAURUS is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_MOUSE_PS2 is not set +CONFIG_INPUT_JOYSTICK=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MSM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_QUP=y +CONFIG_SPI=y +CONFIG_SPI_QUP=y +CONFIG_SPMI=y +CONFIG_PINCTRL_APQ8064=y +CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8X74=y +CONFIG_DEBUG_GPIO=y +CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_MSM=y +CONFIG_THERMAL=y +CONFIG_REGULATOR=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_FB=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +CONFIG_SND_SOC=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_MON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ACM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DEBUG_FILES=y +CONFIG_USB_GADGET_VBUS_DRAW=500 +CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_QCOM_BAM_DMA=y +CONFIG_STAGING=y +CONFIG_QCOM_GSBI=y +CONFIG_COMMON_CLK_QCOM=y +CONFIG_MSM_GCC_8660=y +CONFIG_MSM_MMCC_8960=y +CONFIG_MSM_MMCC_8974=y +CONFIG_MSM_IOMMU=y +CONFIG_GENERIC_PHY=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_CIFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index f7caa909b40d..3d833aea545a 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -122,7 +122,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig index abe61bf379d2..1da5d9e48224 100644 --- a/arch/arm/configs/realview-smp_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -76,8 +76,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig index 7079cbe898a8..d02e9d911bb7 100644 --- a/arch/arm/configs/realview_defconfig +++ b/arch/arm/configs/realview_defconfig @@ -75,8 +75,10 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_CPU=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 193448f31284..eb4d204bff47 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -324,7 +324,6 @@ CONFIG_SND_USB_CAIAQ=m CONFIG_SND_SOC=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index 3a186d653dac..e2f9fa5bb54b 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -56,7 +56,6 @@ CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index dc3881e07630..4414990521d3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y @@ -138,6 +137,8 @@ CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_SSB=m +CONFIG_REGULATOR=y +CONFIG_REGULATOR_ACT8865=y CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 83b07258a385..6d6437cbbc52 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -25,6 +25,7 @@ CONFIG_SCHED_MC=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_NR_CPUS=8 CONFIG_AEABI=y +CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -43,6 +44,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_EEPROM_AT24=y CONFIG_BLK_DEV_SD=y CONFIG_ATA=y CONFIG_SATA_RCAR=y @@ -75,9 +77,11 @@ CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=20 CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_I2C_GPIO=y +CONFIG_I2C_SH_MOBILE=y CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_RSPI=y +CONFIG_SPI_SH_MSIOF=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set @@ -88,10 +92,14 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_PLATFORM=y CONFIG_VIDEO_RCAR_VIN=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_RENESAS_VSP1=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=y CONFIG_DRM=y @@ -100,7 +108,13 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_RCAR=y +CONFIG_USB=y CONFIG_USB_RCAR_GEN2_PHY=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_GADGET=y +CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 2e0419d1b964..a1ede1966baf 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -166,7 +166,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_SL811_HCD=m diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 81ba78eaf54a..7209bfd62074 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -1,13 +1,17 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_HIGHPTE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -25,8 +29,12 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_EEPROM_SUNXI_SID=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_AHCI_SUNXI=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +# CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set @@ -34,38 +42,66 @@ CONFIG_SUN4I_EMAC=y # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set # CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=8 CONFIG_SERIAL_8250_RUNTIME_UARTS=8 CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_MV64XXX=y CONFIG_SPI=y +CONFIG_SPI_SUN4I=y CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SUN6I=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y -# CONFIG_USB_SUPPORT is not set +CONFIG_MFD_AXP20X=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_MMC=y +CONFIG_MMC_SUNXI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_COMMON_CLK_DEBUG=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_INTF_SYSFS is not set +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_DRV_SUNXI=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PHY_SUN4I_USB=y +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_NLS=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig index 71277a1591ba..7209a2caefcf 100644 --- a/arch/arm/configs/tct_hammer_defconfig +++ b/arch/arm/configs/tct_hammer_defconfig @@ -47,7 +47,6 @@ CONFIG_BLK_DEV_RAM_SIZE=10240 # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 2926281368ab..fb25e2982f64 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -73,6 +73,11 @@ CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y +CONFIG_CAN_DEV=y +CONFIG_CAN_MCP251X=y CONFIG_BT=y CONFIG_BT_RFCOMM=y CONFIG_BT_BNEP=y @@ -90,6 +95,7 @@ CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_MTD=y CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y @@ -97,6 +103,7 @@ CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y CONFIG_APDS9802ALS=y CONFIG_ISL29003=y +CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y @@ -112,6 +119,7 @@ CONFIG_USB_NET_SMSC95XX=y CONFIG_BRCMFMAC=m CONFIG_RT2X00=y CONFIG_RT2800USB=m +CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y @@ -181,6 +189,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -222,6 +231,7 @@ CONFIG_LEDS_TRIGGER_TRANSIENT=y CONFIG_LEDS_TRIGGER_CAMERA=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y +CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TPS6586X=y diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 3162173fa75a..932ee4e4a13a 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -165,7 +165,6 @@ CONFIG_SND_PXA2XX_AC97=y CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=m diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 073541a50e23..d52b4ffe2012 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -61,6 +61,9 @@ CONFIG_SND_ARMAACI=m CONFIG_MMC=y CONFIG_MMC_ARMMMCI=m CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_VERSATILE=y +CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index d36e0d3c86ec..0d717a5eff29 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -127,7 +127,6 @@ CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PXA2XX_AC97=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_ISP116X_HCD=m CONFIG_USB_SL811_HCD=m CONFIG_USB_R8A66597_HCD=m diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 731d4f985310..cd11da8b5123 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -132,7 +132,6 @@ CONFIG_SND_SOC=m CONFIG_SND_PXA2XX_SOC=m # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=m CONFIG_USB_ACM=m CONFIG_USB_STORAGE=m diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9a92fd7864a8..3040359094d9 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -241,11 +241,6 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #ifndef CONFIG_GENERIC_ATOMIC64 typedef struct { long long counter; diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 2f59f7443396..c6a3e73a6e24 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -79,5 +79,8 @@ do { \ #define set_mb(var, value) do { var = value; smp_mb(); } while (0) +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() smp_mb() + #endif /* !__ASSEMBLY__ */ #endif /* __ASM_BARRIER_H */ diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index b2e298a90d76..56380995f4c3 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -25,9 +25,7 @@ #include <linux/compiler.h> #include <linux/irqflags.h> - -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() +#include <asm/barrier.h> /* * These functions are the basis of our bit ops. diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h new file mode 100644 index 000000000000..b74899de0774 --- /dev/null +++ b/arch/arm/include/asm/dcc.h @@ -0,0 +1,41 @@ +/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/barrier.h> + +static inline u32 __dcc_getstatus(void) +{ + u32 __ret; + asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg" + : "=r" (__ret) : : "cc"); + + return __ret; +} + +static inline char __dcc_getchar(void) +{ + char __c; + + asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg" + : "=r" (__c)); + isb(); + + return __c; +} + +static inline void __dcc_putchar(char c) +{ + asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char" + : /* no output register */ + : "r" (c)); + isb(); +} diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h index eec0a12c5c1d..8e3fcb924db6 100644 --- a/arch/arm/include/asm/dma-iommu.h +++ b/arch/arm/include/asm/dma-iommu.h @@ -18,7 +18,6 @@ struct dma_iommu_mapping { unsigned int extensions; size_t bitmap_size; /* size of a single bitmap */ size_t bits; /* per bitmap */ - unsigned int size; /* per bitmap */ dma_addr_t base; spinlock_t lock; diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 09af14999c9b..193ceaf01bfd 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -36,7 +36,7 @@ #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG -#define KVM_VCPU_MAX_FEATURES 1 +#define KVM_VCPU_MAX_FEATURES 2 #include <kvm/arm_vgic.h> diff --git a/arch/arm/include/asm/kvm_psci.h b/arch/arm/include/asm/kvm_psci.h index 9a83d98bf170..6bda945d31fa 100644 --- a/arch/arm/include/asm/kvm_psci.h +++ b/arch/arm/include/asm/kvm_psci.h @@ -18,6 +18,10 @@ #ifndef __ARM_KVM_PSCI_H__ #define __ARM_KVM_PSCI_H__ -bool kvm_psci_call(struct kvm_vcpu *vcpu); +#define KVM_ARM_PSCI_0_1 1 +#define KVM_ARM_PSCI_0_2 2 + +int kvm_psci_version(struct kvm_vcpu *vcpu); +int kvm_psci_call(struct kvm_vcpu *vcpu); #endif /* __ARM_KVM_PSCI_H__ */ diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 680a83e94467..7e95d8535e24 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -31,11 +31,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) } #endif /* CONFIG_PCI_DOMAINS */ -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* * The PCI address space does equal the physical memory address space. * The networking and block device layers use this boolean for bounce diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index b681575ad3de..cd94ef2ef283 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -14,7 +14,6 @@ #ifdef CONFIG_OF extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys); -extern void arm_dt_memblock_reserve(void); extern void __init arm_dt_init_cpu_maps(void); #else /* CONFIG_OF */ @@ -24,7 +23,6 @@ static inline const struct machine_desc *setup_machine_fdt(unsigned int dt_phys) return NULL; } -static inline void arm_dt_memblock_reserve(void) { } static inline void arm_dt_init_cpu_maps(void) { } #endif /* CONFIG_OF */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index c4ae171850f8..c25ef3ec6d1f 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -29,16 +29,19 @@ struct psci_operations { int (*cpu_off)(struct psci_power_state state); int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); int (*migrate)(unsigned long cpuid); + int (*affinity_info)(unsigned long target_affinity, + unsigned long lowest_affinity_level); + int (*migrate_info_type)(void); }; extern struct psci_operations psci_ops; extern struct smp_operations psci_smp_ops; #ifdef CONFIG_ARM_PSCI -void psci_init(void); +int psci_init(void); bool psci_smp_available(void); #else -static inline void psci_init(void) { } +static inline int psci_init(void) { return 0; } static inline bool psci_smp_available(void) { return false; } #endif diff --git a/arch/arm/include/asm/trusted_foundations.h b/arch/arm/include/asm/trusted_foundations.h index b5f7705abcb0..624e1d436c6c 100644 --- a/arch/arm/include/asm/trusted_foundations.h +++ b/arch/arm/include/asm/trusted_foundations.h @@ -54,7 +54,9 @@ static inline void register_trusted_foundations( */ pr_err("No support for Trusted Foundations, continuing in degraded mode.\n"); pr_err("Secondary processors as well as CPU PM will be disabled.\n"); +#if IS_ENABLED(CONFIG_SMP) setup_max_cpus = 0; +#endif cpu_idle_poll_ctrl(true); } diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index 7704e28c3483..712b50e0a6dc 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -34,6 +34,7 @@ #define _ASM_ARM_XEN_HYPERCALL_H #include <xen/interface/xen.h> +#include <xen/interface/sched.h> long privcmd_call(unsigned call, unsigned long a1, unsigned long a2, unsigned long a3, @@ -48,6 +49,16 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); int HYPERVISOR_tmem_op(void *arg); +int HYPERVISOR_multicall(struct multicall_entry *calls, uint32_t nr); + +static inline int +HYPERVISOR_suspend(unsigned long start_info_mfn) +{ + struct sched_shutdown r = { .reason = SHUTDOWN_suspend }; + + /* start_info_mfn is unused on ARM */ + return HYPERVISOR_sched_op(SCHEDOP_shutdown, &r); +} static inline void MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, @@ -63,9 +74,4 @@ MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, BUG(); } -static inline int -HYPERVISOR_multicall(void *call_list, int nr_calls) -{ - BUG(); -} #endif /* _ASM_ARM_XEN_HYPERCALL_H */ diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h index 1151188bcd83..50066006e6bd 100644 --- a/arch/arm/include/asm/xen/interface.h +++ b/arch/arm/include/asm/xen/interface.h @@ -40,6 +40,8 @@ typedef uint64_t xen_pfn_t; #define PRI_xen_pfn "llx" typedef uint64_t xen_ulong_t; #define PRI_xen_ulong "llx" +typedef int64_t xen_long_t; +#define PRI_xen_long "llx" /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 42b823cd2d22..032a316eb802 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,15 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SX_UART1_BASE_ADDR 0x02020000 +#define IMX6SX_UART2_BASE_ADDR 0x021e8000 +#define IMX6SX_UART3_BASE_ADDR 0x021ec000 +#define IMX6SX_UART4_BASE_ADDR 0x021f0000 +#define IMX6SX_UART5_BASE_ADDR 0x021f4000 +#define IMX6SX_UART6_BASE_ADDR 0x022a0000 +#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR +#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -103,6 +112,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SX_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9d653d475903..9ef57612811d 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -15,51 +15,15 @@ * */ -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50) -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART3_PHYS 0xA9C00000 -#elif defined(CONFIG_ARCH_MSM7X30) -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART3_PHYS 0xACC00000 -#endif - -#if defined(CONFIG_DEBUG_MSM_UART1) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART2) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART3) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif - -#ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x19C40000 -#endif - -#ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x16440000 -#endif - -#ifdef CONFIG_DEBUG_MSM8974_UART -#define MSM_DEBUG_UART_BASE 0xFA71E000 -#define MSM_DEBUG_UART_PHYS 0xF991E000 -#endif - .macro addruart, rp, rv, tmp -#ifdef MSM_DEBUG_UART_PHYS - ldr \rp, =MSM_DEBUG_UART_PHYS - ldr \rv, =MSM_DEBUG_UART_BASE +#ifdef CONFIG_DEBUG_UART_PHYS + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT #endif .endm .macro senduart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] #else @@ -68,7 +32,7 @@ .endm .macro waituart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] tst \rd, #0x08 diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S new file mode 100644 index 000000000000..b1f54dc4888c --- /dev/null +++ b/arch/arm/include/debug/s3c24xx.S @@ -0,0 +1,46 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Copyright (C) 2005 Simtec Electronics + * + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/serial_s3c.h> + +#define S3C2410_UART1_OFF (0x4000) + + .macro addruart, rp, rv, tmp + ldr \rp, = CONFIG_DEBUG_UART_PHYS + ldr \rv, = CONFIG_DEBUG_UART_VIRT + .endm + + .macro fifo_full_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + tst \rd, #S3C2410_UFSTAT_TXFULL + .endm + + .macro fifo_level_s3c2410 rd, rx + ldr \rd, [\rx, # S3C2410_UFSTAT] + and \rd, \rd, #S3C2410_UFSTAT_TXMASK + .endm + +/* Select the correct implementation depending on the configuration. The + * S3C2440 will get selected by default, as these are the most widely + * used variants of these +*/ + +#if defined(CONFIG_DEBUG_S3C2410_UART) +#define fifo_full fifo_full_s3c2410 +#define fifo_level fifo_level_s3c2410 +#endif + +/* include the reset of the code which will do the work */ + +#include <debug/samsung.S> diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S index ba12cc44b2cb..b88933849a17 100644 --- a/arch/arm/include/debug/vf.S +++ b/arch/arm/include/debug/vf.S @@ -7,9 +7,20 @@ * */ +#define VF_UART0_BASE_ADDR 0x40027000 +#define VF_UART1_BASE_ADDR 0x40028000 +#define VF_UART2_BASE_ADDR 0x40029000 +#define VF_UART3_BASE_ADDR 0x4002a000 +#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR +#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n) +#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT) + +#define VF_UART_VIRTUAL_BASE 0xfe000000 + .macro addruart, rp, rv, tmp - ldr \rp, =0x40028000 @ physical - ldr \rv, =0xfe028000 @ virtual + ldr \rp, =VF_UART_PHYSICAL_BASE @ physical + and \rv, \rp, #0xffffff @ offset within 16MB section + add \rv, \rv, #VF_UART_VIRTUAL_BASE .endm .macro senduart, rd, rx diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index 0b762fafa758..bd13dedbdeff 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,18 +20,18 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 +#define UART0_VIRT 0xF0000000 #define UART1_PHYS 0xE0001000 -#define UART_SIZE SZ_4K -#define UART_VIRT 0xF0001000 +#define UART1_VIRT 0xF0001000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS +# define LL_UART_VADDR UART1_VIRT #else # define LL_UART_PADDR UART0_PHYS +# define LL_UART_VADDR UART0_VIRT #endif -#define LL_UART_VADDR UART_VIRT - .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual @@ -43,12 +43,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART_SR_OFFSET] +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXEMPTY beq 1001b .endm .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXFULL @ bne 1002b @ wait if FIFO is full .endm diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index ef0c8785ba16..e6ebdd3471e5 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -20,6 +20,7 @@ #define __ARM_KVM_H__ #include <linux/types.h> +#include <linux/psci.h> #include <asm/ptrace.h> #define __KVM_HAVE_GUEST_DEBUG @@ -83,6 +84,7 @@ struct kvm_regs { #define KVM_VGIC_V2_CPU_SIZE 0x2000 #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ +#define KVM_ARM_VCPU_PSCI_0_2 1 /* CPU uses PSCI v0.2 */ struct kvm_vcpu_init { __u32 target; @@ -201,9 +203,9 @@ struct kvm_arch_memory_slot { #define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) #define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) -#define KVM_PSCI_RET_SUCCESS 0 -#define KVM_PSCI_RET_NI ((unsigned long)-1) -#define KVM_PSCI_RET_INVAL ((unsigned long)-2) -#define KVM_PSCI_RET_DENIED ((unsigned long)-3) +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED #endif /* __ARM_KVM_H__ */ diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 16d43cd45619..17a26c17f7f5 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -545,6 +545,18 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) */ pci_bus_add_devices(bus); } + + list_for_each_entry(sys, &head, node) { + struct pci_bus *bus = sys->bus; + + /* Configure PCI Express settings */ + if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { + struct pci_bus *child; + + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + } + } } #ifndef CONFIG_PCI_HOST_ITE8152 diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 679a83d470cc..e94a157ddff1 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -27,51 +27,23 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> -void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) -{ - return memblock_virt_alloc(size, align); -} - -void __init arm_dt_memblock_reserve(void) -{ - u64 *reserve_map, base, size; - if (!initial_boot_params) - return; +#ifdef CONFIG_SMP +extern struct of_cpu_method __cpu_method_of_table[]; - /* Reserve the dtb region */ - memblock_reserve(virt_to_phys(initial_boot_params), - be32_to_cpu(initial_boot_params->totalsize)); +static const struct of_cpu_method __cpu_method_of_table_sentinel + __used __section(__cpu_method_of_table_end); - /* - * Process the reserve map. This will probably overlap the initrd - * and dtb locations which are already reserved, but overlaping - * doesn't hurt anything - */ - reserve_map = ((void*)initial_boot_params) + - be32_to_cpu(initial_boot_params->off_mem_rsvmap); - while (1) { - base = be64_to_cpup(reserve_map++); - size = be64_to_cpup(reserve_map++); - if (!size) - break; - memblock_reserve(base, size); - } -} - -#ifdef CONFIG_SMP -extern struct of_cpu_method __cpu_method_of_table_begin[]; -extern struct of_cpu_method __cpu_method_of_table_end[]; static int __init set_smp_ops_by_method(struct device_node *node) { const char *method; - struct of_cpu_method *m = __cpu_method_of_table_begin; + struct of_cpu_method *m = __cpu_method_of_table; if (of_property_read_string(node, "enable-method", &method)) return 0; - for (; m < __cpu_method_of_table_end; m++) + for (; m->method; m++) if (!strcmp(m->method, method)) { smp_set_ops(m->ops); return 1; @@ -247,7 +219,7 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) if (!mdesc) { const char *prop; - long size; + int size; unsigned long dt_root; early_print("\nError: unrecognized/unsupported " diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 46931880093d..f73891b6b730 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -17,63 +17,58 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/reboot.h> +#include <linux/pm.h> +#include <uapi/linux/psci.h> #include <asm/compiler.h> #include <asm/errno.h> #include <asm/opcodes-sec.h> #include <asm/opcodes-virt.h> #include <asm/psci.h> +#include <asm/system_misc.h> struct psci_operations psci_ops; static int (*invoke_psci_fn)(u32, u32, u32, u32); +typedef int (*psci_initcall_t)(const struct device_node *); enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, PSCI_FN_CPU_OFF, PSCI_FN_MIGRATE, + PSCI_FN_AFFINITY_INFO, + PSCI_FN_MIGRATE_INFO_TYPE, PSCI_FN_MAX, }; static u32 psci_function_id[PSCI_FN_MAX]; -#define PSCI_RET_SUCCESS 0 -#define PSCI_RET_EOPNOTSUPP -1 -#define PSCI_RET_EINVAL -2 -#define PSCI_RET_EPERM -3 - static int psci_to_linux_errno(int errno) { switch (errno) { case PSCI_RET_SUCCESS: return 0; - case PSCI_RET_EOPNOTSUPP: + case PSCI_RET_NOT_SUPPORTED: return -EOPNOTSUPP; - case PSCI_RET_EINVAL: + case PSCI_RET_INVALID_PARAMS: return -EINVAL; - case PSCI_RET_EPERM: + case PSCI_RET_DENIED: return -EPERM; }; return -EINVAL; } -#define PSCI_POWER_STATE_ID_MASK 0xffff -#define PSCI_POWER_STATE_ID_SHIFT 0 -#define PSCI_POWER_STATE_TYPE_MASK 0x1 -#define PSCI_POWER_STATE_TYPE_SHIFT 16 -#define PSCI_POWER_STATE_AFFL_MASK 0x3 -#define PSCI_POWER_STATE_AFFL_SHIFT 24 - static u32 psci_power_state_pack(struct psci_power_state state) { - return ((state.id & PSCI_POWER_STATE_ID_MASK) - << PSCI_POWER_STATE_ID_SHIFT) | - ((state.type & PSCI_POWER_STATE_TYPE_MASK) - << PSCI_POWER_STATE_TYPE_SHIFT) | - ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK) - << PSCI_POWER_STATE_AFFL_SHIFT); + return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT) + & PSCI_0_2_POWER_STATE_ID_MASK) | + ((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT) + & PSCI_0_2_POWER_STATE_TYPE_MASK) | + ((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT) + & PSCI_0_2_POWER_STATE_AFFL_MASK); } /* @@ -110,6 +105,14 @@ static noinline int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, return function_id; } +static int psci_get_version(void) +{ + int err; + + err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0); + return err; +} + static int psci_cpu_suspend(struct psci_power_state state, unsigned long entry_point) { @@ -153,26 +156,36 @@ static int psci_migrate(unsigned long cpuid) return psci_to_linux_errno(err); } -static const struct of_device_id psci_of_match[] __initconst = { - { .compatible = "arm,psci", }, - {}, -}; +static int psci_affinity_info(unsigned long target_affinity, + unsigned long lowest_affinity_level) +{ + int err; + u32 fn; + + fn = psci_function_id[PSCI_FN_AFFINITY_INFO]; + err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0); + return err; +} -void __init psci_init(void) +static int psci_migrate_info_type(void) { - struct device_node *np; - const char *method; - u32 id; + int err; + u32 fn; - np = of_find_matching_node(NULL, psci_of_match); - if (!np) - return; + fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE]; + err = invoke_psci_fn(fn, 0, 0, 0); + return err; +} + +static int get_set_conduit_method(struct device_node *np) +{ + const char *method; - pr_info("probing function IDs from device-tree\n"); + pr_info("probing for conduit method from DT.\n"); if (of_property_read_string(np, "method", &method)) { - pr_warning("missing \"method\" property\n"); - goto out_put_node; + pr_warn("missing \"method\" property\n"); + return -ENXIO; } if (!strcmp("hvc", method)) { @@ -180,10 +193,99 @@ void __init psci_init(void) } else if (!strcmp("smc", method)) { invoke_psci_fn = __invoke_psci_fn_smc; } else { - pr_warning("invalid \"method\" property: %s\n", method); + pr_warn("invalid \"method\" property: %s\n", method); + return -EINVAL; + } + return 0; +} + +static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0); +} + +static void psci_sys_poweroff(void) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0); +} + +/* + * PSCI Function IDs for v0.2+ are well defined so use + * standard values. + */ +static int psci_0_2_init(struct device_node *np) +{ + int err, ver; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + ver = psci_get_version(); + + if (ver == PSCI_RET_NOT_SUPPORTED) { + /* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */ + pr_err("PSCI firmware does not comply with the v0.2 spec.\n"); + err = -EOPNOTSUPP; goto out_put_node; + } else { + pr_info("PSCIv%d.%d detected in firmware.\n", + PSCI_VERSION_MAJOR(ver), + PSCI_VERSION_MINOR(ver)); + + if (PSCI_VERSION_MAJOR(ver) == 0 && + PSCI_VERSION_MINOR(ver) < 2) { + err = -EINVAL; + pr_err("Conflicting PSCI version detected.\n"); + goto out_put_node; + } } + pr_info("Using standard PSCI v0.2 function IDs\n"); + psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN_CPU_SUSPEND; + psci_ops.cpu_suspend = psci_cpu_suspend; + + psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF; + psci_ops.cpu_off = psci_cpu_off; + + psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN_CPU_ON; + psci_ops.cpu_on = psci_cpu_on; + + psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN_MIGRATE; + psci_ops.migrate = psci_migrate; + + psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN_AFFINITY_INFO; + psci_ops.affinity_info = psci_affinity_info; + + psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] = + PSCI_0_2_FN_MIGRATE_INFO_TYPE; + psci_ops.migrate_info_type = psci_migrate_info_type; + + arm_pm_restart = psci_sys_reset; + + pm_power_off = psci_sys_poweroff; + +out_put_node: + of_node_put(np); + return err; +} + +/* + * PSCI < v0.2 get PSCI Function IDs via DT. + */ +static int psci_0_1_init(struct device_node *np) +{ + u32 id; + int err; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + pr_info("Using PSCI v0.1 Function IDs from DT\n"); + if (!of_property_read_u32(np, "cpu_suspend", &id)) { psci_function_id[PSCI_FN_CPU_SUSPEND] = id; psci_ops.cpu_suspend = psci_cpu_suspend; @@ -206,5 +308,25 @@ void __init psci_init(void) out_put_node: of_node_put(np); - return; + return err; +} + +static const struct of_device_id psci_of_match[] __initconst = { + { .compatible = "arm,psci", .data = psci_0_1_init}, + { .compatible = "arm,psci-0.2", .data = psci_0_2_init}, + {}, +}; + +int __init psci_init(void) +{ + struct device_node *np; + const struct of_device_id *matched_np; + psci_initcall_t init_fn; + + np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np); + if (!np) + return -ENODEV; + + init_fn = (psci_initcall_t)matched_np->data; + return init_fn(np); } diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c index 570a48cc3d64..28a1db4da704 100644 --- a/arch/arm/kernel/psci_smp.c +++ b/arch/arm/kernel/psci_smp.c @@ -16,6 +16,8 @@ #include <linux/init.h> #include <linux/smp.h> #include <linux/of.h> +#include <linux/delay.h> +#include <uapi/linux/psci.h> #include <asm/psci.h> #include <asm/smp_plat.h> @@ -66,6 +68,36 @@ void __ref psci_cpu_die(unsigned int cpu) /* We should never return */ panic("psci: cpu %d failed to shutdown\n", cpu); } + +int __ref psci_cpu_kill(unsigned int cpu) +{ + int err, i; + + if (!psci_ops.affinity_info) + return 1; + /* + * cpu_kill could race with cpu_die and we can + * potentially end up declaring this cpu undead + * while it is dying. So, try again a few times. + */ + + for (i = 0; i < 10; i++) { + err = psci_ops.affinity_info(cpu_logical_map(cpu), 0); + if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) { + pr_info("CPU%d killed.\n", cpu); + return 1; + } + + msleep(10); + pr_info("Retrying again to check for CPU kill\n"); + } + + pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", + cpu, err); + /* Make platform_cpu_kill() fail. */ + return 0; +} + #endif bool __init psci_smp_available(void) @@ -78,5 +110,6 @@ struct smp_operations __initdata psci_smp_ops = { .smp_boot_secondary = psci_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = psci_cpu_die, + .cpu_kill = psci_cpu_kill, #endif }; diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 0fa8825cea04..3997c411c140 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -185,6 +185,15 @@ const struct cpumask *cpu_coregroup_mask(int cpu) return &cpu_topology[cpu].core_sibling; } +/* + * The current assumption is that we can power gate each core independently. + * This will be superseded by DT binding once available. + */ +const struct cpumask *cpu_corepower_mask(int cpu) +{ + return &cpu_topology[cpu].thread_sibling; +} + static void update_siblings_masks(unsigned int cpuid) { struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid]; @@ -266,6 +275,20 @@ void store_cpu_topology(unsigned int cpuid) cpu_topology[cpuid].socket_id, mpidr); } +static inline const int cpu_corepower_flags(void) +{ + return SD_SHARE_PKG_RESOURCES | SD_SHARE_POWERDOMAIN; +} + +static struct sched_domain_topology_level arm_topology[] = { +#ifdef CONFIG_SCHED_MC + { cpu_corepower_mask, cpu_corepower_flags, SD_INIT_NAME(GMC) }, + { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, +#endif + { cpu_cpu_mask, SD_INIT_NAME(DIE) }, + { NULL, }, +}; + /* * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array @@ -289,4 +312,7 @@ void __init init_cpu_topology(void) smp_wmb(); parse_dt_topology(); + + /* Set scheduler topology descriptor */ + set_sched_topology(arm_topology); } diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index f0e50a0f3a65..3c82b37c0f9e 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -197,6 +197,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: case KVM_CAP_ONE_REG: case KVM_CAP_ARM_PSCI: + case KVM_CAP_ARM_PSCI_0_2: r = 1; break; case KVM_CAP_COALESCED_MMIO: diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 0de91fc6de0f..4c979d466cc1 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -38,14 +38,18 @@ static int handle_svc_hyp(struct kvm_vcpu *vcpu, struct kvm_run *run) static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) { + int ret; + trace_kvm_hvc(*vcpu_pc(vcpu), *vcpu_reg(vcpu, 0), kvm_vcpu_hvc_get_imm(vcpu)); - if (kvm_psci_call(vcpu)) + ret = kvm_psci_call(vcpu); + if (ret < 0) { + kvm_inject_undefined(vcpu); return 1; + } - kvm_inject_undefined(vcpu); - return 1; + return ret; } static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index 448f60e8d23c..09cf37737ee2 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -27,6 +27,36 @@ * as described in ARM document number ARM DEN 0022A. */ +#define AFFINITY_MASK(level) ~((0x1UL << ((level) * MPIDR_LEVEL_BITS)) - 1) + +static unsigned long psci_affinity_mask(unsigned long affinity_level) +{ + if (affinity_level <= 3) + return MPIDR_HWID_BITMASK & AFFINITY_MASK(affinity_level); + + return 0; +} + +static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu) +{ + /* + * NOTE: For simplicity, we make VCPU suspend emulation to be + * same-as WFI (Wait-for-interrupt) emulation. + * + * This means for KVM the wakeup events are interrupts and + * this is consistent with intended use of StateID as described + * in section 5.4.1 of PSCI v0.2 specification (ARM DEN 0022A). + * + * Further, we also treat power-down request to be same as + * stand-by request as-per section 5.4.2 clause 3 of PSCI v0.2 + * specification (ARM DEN 0022A). This means all suspend states + * for KVM will preserve the register state. + */ + kvm_vcpu_block(vcpu); + + return PSCI_RET_SUCCESS; +} + static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu) { vcpu->arch.pause = true; @@ -38,6 +68,7 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) struct kvm_vcpu *vcpu = NULL, *tmp; wait_queue_head_t *wq; unsigned long cpu_id; + unsigned long context_id; unsigned long mpidr; phys_addr_t target_pc; int i; @@ -58,10 +89,17 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) * Make sure the caller requested a valid CPU and that the CPU is * turned off. */ - if (!vcpu || !vcpu->arch.pause) - return KVM_PSCI_RET_INVAL; + if (!vcpu) + return PSCI_RET_INVALID_PARAMS; + if (!vcpu->arch.pause) { + if (kvm_psci_version(source_vcpu) != KVM_ARM_PSCI_0_1) + return PSCI_RET_ALREADY_ON; + else + return PSCI_RET_INVALID_PARAMS; + } target_pc = *vcpu_reg(source_vcpu, 2); + context_id = *vcpu_reg(source_vcpu, 3); kvm_reset_vcpu(vcpu); @@ -76,26 +114,160 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu) kvm_vcpu_set_be(vcpu); *vcpu_pc(vcpu) = target_pc; + /* + * NOTE: We always update r0 (or x0) because for PSCI v0.1 + * the general puspose registers are undefined upon CPU_ON. + */ + *vcpu_reg(vcpu, 0) = context_id; vcpu->arch.pause = false; smp_mb(); /* Make sure the above is visible */ wq = kvm_arch_vcpu_wq(vcpu); wake_up_interruptible(wq); - return KVM_PSCI_RET_SUCCESS; + return PSCI_RET_SUCCESS; } -/** - * kvm_psci_call - handle PSCI call if r0 value is in range - * @vcpu: Pointer to the VCPU struct - * - * Handle PSCI calls from guests through traps from HVC instructions. - * The calling convention is similar to SMC calls to the secure world where - * the function number is placed in r0 and this function returns true if the - * function number specified in r0 is withing the PSCI range, and false - * otherwise. - */ -bool kvm_psci_call(struct kvm_vcpu *vcpu) +static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu) +{ + int i; + unsigned long mpidr; + unsigned long target_affinity; + unsigned long target_affinity_mask; + unsigned long lowest_affinity_level; + struct kvm *kvm = vcpu->kvm; + struct kvm_vcpu *tmp; + + target_affinity = *vcpu_reg(vcpu, 1); + lowest_affinity_level = *vcpu_reg(vcpu, 2); + + /* Determine target affinity mask */ + target_affinity_mask = psci_affinity_mask(lowest_affinity_level); + if (!target_affinity_mask) + return PSCI_RET_INVALID_PARAMS; + + /* Ignore other bits of target affinity */ + target_affinity &= target_affinity_mask; + + /* + * If one or more VCPU matching target affinity are running + * then ON else OFF + */ + kvm_for_each_vcpu(i, tmp, kvm) { + mpidr = kvm_vcpu_get_mpidr(tmp); + if (((mpidr & target_affinity_mask) == target_affinity) && + !tmp->arch.pause) { + return PSCI_0_2_AFFINITY_LEVEL_ON; + } + } + + return PSCI_0_2_AFFINITY_LEVEL_OFF; +} + +static void kvm_prepare_system_event(struct kvm_vcpu *vcpu, u32 type) +{ + memset(&vcpu->run->system_event, 0, sizeof(vcpu->run->system_event)); + vcpu->run->system_event.type = type; + vcpu->run->exit_reason = KVM_EXIT_SYSTEM_EVENT; +} + +static void kvm_psci_system_off(struct kvm_vcpu *vcpu) +{ + kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_SHUTDOWN); +} + +static void kvm_psci_system_reset(struct kvm_vcpu *vcpu) +{ + kvm_prepare_system_event(vcpu, KVM_SYSTEM_EVENT_RESET); +} + +int kvm_psci_version(struct kvm_vcpu *vcpu) +{ + if (test_bit(KVM_ARM_VCPU_PSCI_0_2, vcpu->arch.features)) + return KVM_ARM_PSCI_0_2; + + return KVM_ARM_PSCI_0_1; +} + +static int kvm_psci_0_2_call(struct kvm_vcpu *vcpu) +{ + int ret = 1; + unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0); + unsigned long val; + + switch (psci_fn) { + case PSCI_0_2_FN_PSCI_VERSION: + /* + * Bits[31:16] = Major Version = 0 + * Bits[15:0] = Minor Version = 2 + */ + val = 2; + break; + case PSCI_0_2_FN_CPU_SUSPEND: + case PSCI_0_2_FN64_CPU_SUSPEND: + val = kvm_psci_vcpu_suspend(vcpu); + break; + case PSCI_0_2_FN_CPU_OFF: + kvm_psci_vcpu_off(vcpu); + val = PSCI_RET_SUCCESS; + break; + case PSCI_0_2_FN_CPU_ON: + case PSCI_0_2_FN64_CPU_ON: + val = kvm_psci_vcpu_on(vcpu); + break; + case PSCI_0_2_FN_AFFINITY_INFO: + case PSCI_0_2_FN64_AFFINITY_INFO: + val = kvm_psci_vcpu_affinity_info(vcpu); + break; + case PSCI_0_2_FN_MIGRATE: + case PSCI_0_2_FN64_MIGRATE: + val = PSCI_RET_NOT_SUPPORTED; + break; + case PSCI_0_2_FN_MIGRATE_INFO_TYPE: + /* + * Trusted OS is MP hence does not require migration + * or + * Trusted OS is not present + */ + val = PSCI_0_2_TOS_MP; + break; + case PSCI_0_2_FN_MIGRATE_INFO_UP_CPU: + case PSCI_0_2_FN64_MIGRATE_INFO_UP_CPU: + val = PSCI_RET_NOT_SUPPORTED; + break; + case PSCI_0_2_FN_SYSTEM_OFF: + kvm_psci_system_off(vcpu); + /* + * We should'nt be going back to guest VCPU after + * receiving SYSTEM_OFF request. + * + * If user space accidently/deliberately resumes + * guest VCPU after SYSTEM_OFF request then guest + * VCPU should see internal failure from PSCI return + * value. To achieve this, we preload r0 (or x0) with + * PSCI return value INTERNAL_FAILURE. + */ + val = PSCI_RET_INTERNAL_FAILURE; + ret = 0; + break; + case PSCI_0_2_FN_SYSTEM_RESET: + kvm_psci_system_reset(vcpu); + /* + * Same reason as SYSTEM_OFF for preloading r0 (or x0) + * with PSCI return value INTERNAL_FAILURE. + */ + val = PSCI_RET_INTERNAL_FAILURE; + ret = 0; + break; + default: + return -EINVAL; + } + + *vcpu_reg(vcpu, 0) = val; + return ret; +} + +static int kvm_psci_0_1_call(struct kvm_vcpu *vcpu) { unsigned long psci_fn = *vcpu_reg(vcpu, 0) & ~((u32) 0); unsigned long val; @@ -103,20 +275,45 @@ bool kvm_psci_call(struct kvm_vcpu *vcpu) switch (psci_fn) { case KVM_PSCI_FN_CPU_OFF: kvm_psci_vcpu_off(vcpu); - val = KVM_PSCI_RET_SUCCESS; + val = PSCI_RET_SUCCESS; break; case KVM_PSCI_FN_CPU_ON: val = kvm_psci_vcpu_on(vcpu); break; case KVM_PSCI_FN_CPU_SUSPEND: case KVM_PSCI_FN_MIGRATE: - val = KVM_PSCI_RET_NI; + val = PSCI_RET_NOT_SUPPORTED; break; - default: - return false; + return -EINVAL; } *vcpu_reg(vcpu, 0) = val; - return true; + return 1; +} + +/** + * kvm_psci_call - handle PSCI call if r0 value is in range + * @vcpu: Pointer to the VCPU struct + * + * Handle PSCI calls from guests through traps from HVC instructions. + * The calling convention is similar to SMC calls to the secure world + * where the function number is placed in r0. + * + * This function returns: > 0 (success), 0 (success but exit to user + * space), and < 0 (errors) + * + * Errors: + * -EINVAL: Unrecognized PSCI function + */ +int kvm_psci_call(struct kvm_vcpu *vcpu) +{ + switch (kvm_psci_version(vcpu)) { + case KVM_ARM_PSCI_0_2: + return kvm_psci_0_2_call(vcpu); + case KVM_ARM_PSCI_0_1: + return kvm_psci_0_1_call(vcpu); + default: + return -EINVAL; + }; } diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b2d2cf4dc052..45b55e0f0db6 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -167,7 +167,6 @@ config SOC_AT91SAM9X5 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI select HAVE_AT91_SMD select HAVE_AT91_USB_CLK @@ -183,7 +182,6 @@ config SOC_AT91SAM9N12 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using Atmel's AT91SAM9N12 SoC. diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..3f4bb58aea54 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -15,6 +15,7 @@ #include <linux/dma-mapping.h> #include <linux/gpio.h> +#include <linux/gpio/driver.h> #include <linux/platform_device.h> #include <linux/i2c-gpio.h> @@ -25,6 +26,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -923,7 +925,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -962,7 +963,14 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, +}; + +static struct gpiod_lookup_table uart0_gpios_table = { + .dev_id = "atmel_usart", + .table = { + GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW), + { }, + }, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -993,7 +1001,7 @@ static inline void configure_usart0_pins(unsigned pins) * We need to drive the pin manually. The serial driver will driver * this to high when initializing. */ - uart0_data.rts_gpio = AT91_PIN_PA21; + gpiod_add_lookup_table(&uart0_gpios_table); } } @@ -1013,7 +1021,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1065,7 +1072,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1109,7 +1115,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index a0282928e9c1..ef88e0fe4e80 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,12 +24,11 @@ #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_adc.h> #include <mach/hardware.h> #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -820,7 +819,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -859,7 +857,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -911,7 +908,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -955,7 +951,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -999,7 +994,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); @@ -1043,7 +1037,6 @@ static struct resource uart4_resources[] = { static struct atmel_uart_data uart4_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart4_dmamask = DMA_BIT_MASK(32); @@ -1082,7 +1075,6 @@ static struct resource uart5_resources[] = { static struct atmel_uart_data uart5_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart5_dmamask = DMA_BIT_MASK(32); @@ -1308,30 +1300,23 @@ static struct platform_device at91_adc_device = { static struct at91_adc_trigger at91_adc_triggers[] = { [0] = { .name = "timer-counter-0", - .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN, + .value = 0x1, }, [1] = { .name = "timer-counter-1", - .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN, + .value = 0x3, }, [2] = { .name = "timer-counter-2", - .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN, + .value = 0x5, }, [3] = { .name = "external", - .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN, + .value = 0xd, .is_external = true, }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1349,9 +1334,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..29baacb5c359 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -29,7 +29,7 @@ #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -881,7 +881,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -920,7 +919,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -964,7 +962,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1008,7 +1005,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..309390d8e2f8 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -28,6 +28,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1325,7 +1326,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1364,7 +1364,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1408,7 +1407,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1452,7 +1450,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 5e6f498db0a8..9d3d544ac19c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,7 +182,7 @@ static struct clk vdec_clk = { static struct clk adc_op_clk = { .name = "adc_op_clk", .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 13200000, + .rate_hz = 300000, }; /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index dab362c06487..391ab6bb536a 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -25,7 +25,6 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/at91_adc.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -39,6 +38,7 @@ #include "board.h" #include "generic.h" #include "clock.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- - * Touchscreen - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; - -static struct resource tsadcc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, - }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), -}; - -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) -{ - if (!data) - return; - - at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ - at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ - at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ - at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9g45_tsadcc_device); -} -#else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC + * ADC and touchscreen * -------------------------------------------------------------------- */ #if IS_ENABLED(CONFIG_AT91_ADC) @@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g45 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = 0x08, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PD28, 0); - data->num_channels = 8; data->startup_time = 40; - data->registers = &at91_adc_register_g45; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; @@ -1588,7 +1528,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -1627,7 +1566,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1671,7 +1609,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1715,7 +1652,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1759,7 +1695,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index f2ea7b0a02da..c8988fe5ff70 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -215,6 +216,9 @@ static void __init at91sam9n12_register_clocks(void) ARRAY_SIZE(periph_clocks_lookups)); } +#else +#define at91sam9n12_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9N12 processor initialization diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 57f12d86c0e6..a79960f57e6a 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -153,6 +153,11 @@ static struct clk ac97_clk = { .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 1000000, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &lcdc_clk, &ac97_clk, + &adc_op_clk, // irq0 }; @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), + CLKDEV_CON_ID("adc_clk", &tsc_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..0b1d71a7d9bf 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -23,9 +23,11 @@ #include <mach/at91sam9_smc.h> #include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/at91_adc.h> #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { } /* -------------------------------------------------------------------- - * Touchscreen + * ADC and Touchscreen * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; -static struct resource tsadcc_resources[] = { +static struct resource adc_resources[] = { [0] = { .start = AT91SAM9RL_BASE_TSC, .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, @@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = { } }; -static struct platform_device at91sam9rl_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, +static struct platform_device at91_adc_device = { + .name = "at91sam9rl-adc", + .id = -1, + .dev = { + .platform_data = &adc_data, }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), }; -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "external-rising", + .value = 1, + .is_external = true, + }, + [1] = { + .name = "external-falling", + .value = 2, + .is_external = true, + }, + [2] = { + .name = "external-any", + .value = 3, + .is_external = true, + }, + [3] = { + .name = "continuous", + .value = 6, + .is_external = false, + }, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) return; - at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9rl_tsadcc_device); + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA17, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA18, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA19, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA20, 0); + if (test_bit(4, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD6, 0); + if (test_bit(5, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD7, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PB15, 0); + + data->startup_time = 40; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); } #else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +void __init at91_add_device_adc(struct at91_adc_data *data) {} #endif - /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ @@ -957,7 +993,6 @@ static struct resource dbgu_resources[] = { static struct atmel_uart_data dbgu_data = { .use_dma_tx = 0, .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .rts_gpio = -EINVAL, }; static u64 dbgu_dmamask = DMA_BIT_MASK(32); @@ -996,7 +1031,6 @@ static struct resource uart0_resources[] = { static struct atmel_uart_data uart0_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart0_dmamask = DMA_BIT_MASK(32); @@ -1048,7 +1082,6 @@ static struct resource uart1_resources[] = { static struct atmel_uart_data uart1_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart1_dmamask = DMA_BIT_MASK(32); @@ -1092,7 +1125,6 @@ static struct resource uart2_resources[] = { static struct atmel_uart_data uart2_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart2_dmamask = DMA_BIT_MASK(32); @@ -1136,7 +1168,6 @@ static struct resource uart3_resources[] = { static struct atmel_uart_data uart3_data = { .use_dma_tx = 1, .use_dma_rx = 1, - .rts_gpio = -EINVAL, }; static u64 uart3_dmamask = DMA_BIT_MASK(32); diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 9ad781d5ee7c..028268ff3722 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -19,9 +19,10 @@ #include "board.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,6 +314,9 @@ static void __init at91sam9x5_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#else +#define at91sam9x5_register_clocks NULL +#endif /* -------------------------------------------------------------------- * AT91SAM9x5 processor initialization diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 35ab632bbf68..3f6dbcc34022 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init onearm_init_early(void) { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index f95e31cda4b3..597c649170aa 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -46,6 +46,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init afeb9260_init_early(void) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 112e867c4abe..a30502c8d379 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -44,6 +44,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cam60_init_early(void) diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 92983050a9bd..47313d3ee037 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init carmeva_init_early(void) diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 008527efdbcf..2037f78c84e7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -48,6 +48,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cpu9krea_init_early(void) { diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 42f1353a4baf..c094350c9314 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -43,6 +43,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static struct gpio_led cpuat91_leds[] = { { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index e5fde215225b..0e35a45cf8d4 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -42,7 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init csb337_init_early(void) { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index fdf11061c577..18d027f529a8 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init csb637_init_early(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index f9be8161bbfa..aa457a8b22f5 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -38,6 +38,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init eb9200_init_early(void) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index b2fcd71262ba..ede1373ccaba 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ecb_at91init_early(void) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 77de410efc90..4e75321a8f2a 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -31,6 +31,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static void __init eco920_init_early(void) { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 737c08563628..68f1ab6bd08f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,6 +37,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init flexibity_init_early(void) { diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index c20a870ea9c9..8b22c60bb238 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -47,6 +47,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * The FOX Board G20 hardware comes as the "Netus G20" board with diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 416bae8435ee..b729dd1271bf 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -39,6 +39,7 @@ #include "generic.h" #include "gsia18s.h" #include "stamp9g20.h" +#include "gpio.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 88e2f5d2d16d..93b1df42f639 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kafa_init_early(void) diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 0c519d9ebffc..d58d36225e08 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kb9202_init_early(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 5f25fa54eb93..b48d95ec5152 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,6 +37,7 @@ #include "sam9_smc.h" #include "generic.h" #include "stamp9g20.h" +#include "gpio.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab2b2ec36c14..2c0f2d554d84 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,6 +43,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init picotux200_init_early(void) diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 8b17dadc1aba..953cea416754 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,6 +45,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index f6d7f1958c7e..f28e8b74df4b 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -31,6 +31,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init rsi_ews_init_early(void) { diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 43ee4dc43b50..d24dda67e2d3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -43,6 +43,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f4f8735315da..65dea12d685e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -49,6 +49,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 473546b9408b..4637432de08f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -53,6 +53,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2f931915c80c..cd2726ee5add 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -52,6 +52,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f9cd1f2c7146..e1be6e25b380 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * board revision encoding diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ef39078c8ce2..1ea61328f30d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; /* - * Touchscreen - */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 300000, - .pendet_debounce = 0x0d, - .ts_sample_hold_time = 0x0a, -}; - -/* - * ADCs + * ADCs and touchscreen */ static struct at91_adc_data ek_adc_data = { .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), .use_external_triggers = true, .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; /* @@ -485,9 +478,7 @@ static void __init ek_board_init(void) at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); - /* Touch Screen */ - at91_add_device_tsadcc(&ek_tsadcc_data); - /* ADC */ + /* ADC and touchscreen */ at91_add_device_adc(&ek_adc_data); /* Push Buttons */ ek_add_device_buttons(); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 604eecf6cd70..b64648b4a1fc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/platform_data/at91_adc.h> #include <video/atmel_lcdc.h> @@ -38,6 +39,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = { /* - * Touchscreen + * ADC + Touchscreen */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 1000000, - .pendet_debounce = 0x0f, - .ts_sample_hold_time = 0x03, +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), + .use_external_triggers = true, + .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; @@ -310,8 +313,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller */ - at91_add_device_tsadcc(&ek_tsadcc_data); + /* Touch Screen Controller + ADC */ + at91_add_device_adc(&ek_adc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index f1d49e929ccb..1b870e6def0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -38,6 +38,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e4a5ac17cdbc..3b575036ff96 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,6 +32,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" void __init stamp9g20_init_early(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index be083771df2e..46fdb0c68a68 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -50,6 +50,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init yl9200_init_early(void) diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h index 6c08b341167d..4e773b55bc2d 100644 --- a/arch/arm/mach-at91/board.h +++ b/arch/arm/mach-at91/board.h @@ -118,9 +118,6 @@ struct isi_platform_data; extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); - /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); - /* CAN */ extern void __init at91_add_device_can(struct at91_can_data *data); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index a5afcf76550e..d3f05aaad8ba 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ #include <mach/at91_pio.h> #include "generic.h" +#include "gpio.h" #define MAX_NB_GPIO_PER_BANK 32 @@ -49,6 +50,7 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset); static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip); static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset); +static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset); static int at91_gpiolib_direction_output(struct gpio_chip *chip, unsigned offset, int val); static int at91_gpiolib_direction_input(struct gpio_chip *chip, @@ -60,6 +62,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset); .chip = { \ .label = name, \ .request = at91_gpiolib_request, \ + .get_direction = at91_gpiolib_get_direction, \ .direction_input = at91_gpiolib_direction_input, \ .direction_output = at91_gpiolib_direction_output, \ .get = at91_gpiolib_get, \ @@ -799,6 +802,17 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset) return 0; } +static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset) +{ + struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip); + void __iomem *pio = at91_gpio->regbase; + unsigned mask = 1 << offset; + u32 osr; + + osr = __raw_readl(pio + PIO_OSR); + return !(osr & mask); +} + static int at91_gpiolib_direction_input(struct gpio_chip *chip, unsigned offset) { diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h index 5fc23771c154..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/gpio.h @@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h deleted file mode 100644 index c287307b9a3b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_9G45 (0xff << 8) -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_9G45 (0x7f << 16) -#define AT91_ADC_STARTUP_9X5 (0xf << 16) -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ -#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_IER_PEN (1 << 29) -#define AT91_ADC_IER_NOPEN (1 << 30) -#define AT91_ADC_IER_XRDY (1 << 20) -#define AT91_ADC_IER_YRDY (1 << 21) -#define AT91_ADC_IER_PRDY (1 << 22) -#define AT91_ADC_ISR_PENS (1 << 31) - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ - -#define AT91_ADC_ACR 0x94 /* Analog Control Register */ -#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ - -#define AT91_ADC_TSMR 0xB0 -#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ -#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) -#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) -#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ -#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) -#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ -#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ -#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) -#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ -#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ -#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ - -#define AT91_ADC_TSXPOSR 0xB4 -#define AT91_ADC_TSYPOSR 0xB8 -#define AT91_ADC_TSPRESSR 0xBC - -#define AT91_ADC_TRGR_9260 AT91_ADC_MR -#define AT91_ADC_TRGR_9G45 0x08 -#define AT91_ADC_TRGR_9X5 0xC0 - -/* Trigger Register bit field */ -#define AT91_ADC_TRGR_TRGPER (0xffff << 16) -#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) -#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) -#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index f17aa3150019..56338245653a 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -104,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 3e22978b5547..77c4d8fd03fd 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include "board.h" +#include "gpio.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8bda1cefdf96..e95554532987 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -32,6 +32,7 @@ #include "at91_aic.h" #include "generic.h" #include "pm.h" +#include "gpio.h" /* * Show the reason for the previous system reset. diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig new file mode 100644 index 000000000000..8be7e0ae1922 --- /dev/null +++ b/arch/arm/mach-axxia/Kconfig @@ -0,0 +1,16 @@ +config ARCH_AXXIA + bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE) + select ARCH_DMA_ADDR_T_64BIT + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER + select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + select ZONE_DMA + help + This enables support for the LSI Axxia devices. + + The LSI Axxia platforms require a Flattened Device Tree to be passed + to the kernel. diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile new file mode 100644 index 000000000000..ec4f68b460c6 --- /dev/null +++ b/arch/arm/mach-axxia/Makefile @@ -0,0 +1,2 @@ +obj-y += axxia.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c new file mode 100644 index 000000000000..19e5a1d95397 --- /dev/null +++ b/arch/arm/mach-axxia/axxia.c @@ -0,0 +1,28 @@ +/* + * Support for the LSI Axxia SoC devices based on ARM cores. + * + * Copyright (C) 2012 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/init.h> +#include <asm/mach/arch.h> + +static const char *axxia_dt_match[] __initconst = { + "lsi,axm5516", + "lsi,axm5516-sim", + "lsi,axm5516-emu", + NULL +}; + +DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX") + .dt_compat = axxia_dt_match, +MACHINE_END diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c new file mode 100644 index 000000000000..959d4df3d2b6 --- /dev/null +++ b/arch/arm/mach-axxia/platsmp.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-axxia/platsmp.c + * + * Copyright (C) 2012 LSI Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/smp.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/cacheflush.h> + +/* Syscon register offsets for releasing cores from reset */ +#define SC_CRIT_WRITE_KEY 0x1000 +#define SC_RST_CPU_HOLD 0x1010 + +/* + * Write the kernel entry point for secondary CPUs to the specified address + */ +static void write_release_addr(u32 release_phys) +{ + u32 *virt = (u32 *) phys_to_virt(release_phys); + writel_relaxed(virt_to_phys(secondary_startup), virt); + /* Make sure this store is visible to other CPUs */ + smp_wmb(); + __cpuc_flush_dcache_area(virt, sizeof(u32)); +} + +static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *syscon_np; + void __iomem *syscon; + u32 tmp; + + syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon"); + if (!syscon_np) + return -ENOENT; + + syscon = of_iomap(syscon_np, 0); + if (!syscon) + return -ENOMEM; + + tmp = readl(syscon + SC_RST_CPU_HOLD); + writel(0xab, syscon + SC_CRIT_WRITE_KEY); + tmp &= ~(1 << cpu); + writel(tmp, syscon + SC_RST_CPU_HOLD); + + return 0; +} + +static void __init axxia_smp_prepare_cpus(unsigned int max_cpus) +{ + int cpu_count = 0; + int cpu; + + /* + * Initialise the present map, which describes the set of CPUs actually + * populated at the present time. + */ + for_each_possible_cpu(cpu) { + struct device_node *np; + u32 release_phys; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + continue; + if (of_property_read_u32(np, "cpu-release-addr", &release_phys)) + continue; + + if (cpu_count < max_cpus) { + set_cpu_present(cpu, true); + cpu_count++; + } + + if (release_phys != 0) + write_release_addr(release_phys); + } +} + +static struct smp_operations axxia_smp_ops __initdata = { + .smp_prepare_cpus = axxia_smp_prepare_cpus, + .smp_boot_secondary = axxia_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops); diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 49c914cd9c7a..9bc6db1c1348 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,31 +1,58 @@ config ARCH_BCM - bool "Broadcom SoC Support" - depends on ARCH_MULTIPLATFORM + bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help - This enables support for Broadcom ARM based SoC - chips - -if ARCH_BCM + This enables support for Broadcom ARM based SoC chips menu "Broadcom SoC Selection" + depends on ARCH_BCM config ARCH_BCM_MOBILE - bool "Broadcom Mobile SoC" if ARCH_MULTI_V7 - depends on MMU + bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select GPIO_BCM_KONA select TICK_ONESHOT - select CACHE_L2X0 select HAVE_ARM_ARCH_TIMER select PINCTRL help This enables support for systems based on Broadcom mobile SoCs. - It currently supports the 'BCM281XX' family, which includes - BCM11130, BCM11140, BCM11351, BCM28145 and - BCM28155 variants. + +if ARCH_BCM_MOBILE + +menu "Broadcom Mobile SoC Selection" + +config ARCH_BCM_281XX + bool "Broadcom BCM281XX SoC family" + default y + help + Enable support for the the BCM281XX family, which includes + BCM11130, BCM11140, BCM11351, BCM28145 and BCM28155 + variants. + +config ARCH_BCM_21664 + bool "Broadcom BCM21664 SoC family" + default y + help + Enable support for the the BCM21664 family, which includes + BCM21663 and BCM21664 variants. + +config ARCH_BCM_MOBILE_L2_CACHE + bool "Broadcom mobile SoC level 2 cache support" + depends on (ARCH_BCM_281XX || ARCH_BCM_21664) + default y + select CACHE_L2X0 + select ARCH_BCM_MOBILE_SMC + +config ARCH_BCM_MOBILE_SMC + bool + depends on ARCH_BCM_281XX || ARCH_BCM_21664 + +endmenu + +endif config ARCH_BCM2835 bool "Broadcom BCM2835 family" if ARCH_MULTI_V6 @@ -33,10 +60,7 @@ config ARCH_BCM2835 select ARM_AMBA select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CLKDEV_LOOKUP select CLKSRC_OF - select CPU_V6 - select GENERIC_CLOCKEVENTS select PINCTRL select PINCTRL_BCM2835 help @@ -45,17 +69,12 @@ config ARCH_BCM2835 config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7 - depends on MMU select ARM_GIC select CACHE_L2X0 select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select HAVE_SMP - select COMMON_CLK - select GENERIC_CLOCKEVENTS select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK - select MIGHT_HAVE_PCI help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -70,5 +89,3 @@ config ARCH_BCM_5301X network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx endmenu - -endif diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index a326b28c4406..731292114975 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -10,10 +10,23 @@ # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. -obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o board_bcm21664.o \ - bcm_kona_smc.o bcm_kona_smc_asm.o kona.o +# BCM281XX +obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o + +# BCM21664 +obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o + +# BCM281XX and BCM21664 L2 cache control +obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o + +# Support for secure monitor traps +obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o +ifeq ($(call as-instr,.arch_extension sec,as_has_sec),as_has_sec) +CFLAGS_bcm_kona_smc.o += -Wa,-march=armv7-a+sec -DREQUIRES_SEC +endif + +# BCM2835 obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o -plus_sec := $(call as-instr,.arch_extension sec,+sec) -AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec) +# BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index 5e31e918f325..a55a7ecf146a 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -21,11 +21,8 @@ #include "bcm_kona_smc.h" -struct secure_bridge_data { - void __iomem *bounce; /* virtual address */ - u32 __iomem buffer_addr; /* physical address */ - int initialized; -} bridge_data; +static u32 bcm_smc_buffer_phys; /* physical address */ +static void __iomem *bcm_smc_buffer; /* virtual address */ struct bcm_kona_smc_data { unsigned service_id; @@ -33,6 +30,7 @@ struct bcm_kona_smc_data { unsigned arg1; unsigned arg2; unsigned arg3; + unsigned result; }; static const struct of_device_id bcm_kona_smc_ids[] __initconst = { @@ -41,59 +39,125 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = { {}, }; -/* Map in the bounce area */ +/* Map in the args buffer area */ int __init bcm_kona_smc_init(void) { struct device_node *node; + const __be32 *prop_val; + u64 prop_size = 0; + unsigned long buffer_size; + u32 buffer_phys; /* Read buffer addr and size from the device tree node */ node = of_find_matching_node(NULL, bcm_kona_smc_ids); if (!node) return -ENODEV; - /* Don't care about size or flags of the DT node */ - bridge_data.buffer_addr = - be32_to_cpu(*of_get_address(node, 0, NULL, NULL)); - BUG_ON(!bridge_data.buffer_addr); + prop_val = of_get_address(node, 0, &prop_size, NULL); + if (!prop_val) + return -EINVAL; - bridge_data.bounce = of_iomap(node, 0); - BUG_ON(!bridge_data.bounce); + /* We assume space for four 32-bit arguments */ + if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX) + return -EINVAL; + buffer_size = (unsigned long)prop_size; - bridge_data.initialized = 1; + buffer_phys = be32_to_cpup(prop_val); + if (!buffer_phys) + return -EINVAL; + + bcm_smc_buffer = ioremap(buffer_phys, buffer_size); + if (!bcm_smc_buffer) + return -ENOMEM; + bcm_smc_buffer_phys = buffer_phys; pr_info("Kona Secure API initialized\n"); return 0; } +/* + * int bcm_kona_do_smc(u32 service_id, u32 buffer_addr) + * + * Only core 0 can run the secure monitor code. If an "smc" request + * is initiated on a different core it must be redirected to core 0 + * for execution. We rely on the caller to handle this. + * + * Each "smc" request supplies a service id and the address of a + * buffer containing parameters related to the service to be + * performed. A flags value defines the behavior of the level 2 + * cache and interrupt handling while the secure monitor executes. + * + * Parameters to the "smc" request are passed in r4-r6 as follows: + * r4 service id + * r5 flags (SEC_ROM_*) + * r6 physical address of buffer with other parameters + * + * Execution of an "smc" request produces two distinct results. + * + * First, the secure monitor call itself (regardless of the specific + * service request) can succeed, or can produce an error. When an + * "smc" request completes this value is found in r12; it should + * always be SEC_EXIT_NORMAL. + * + * In addition, the particular service performed produces a result. + * The values that should be expected depend on the service. We + * therefore return this value to the caller, so it can handle the + * request result appropriately. This result value is found in r0 + * when the "smc" request completes. + */ +static int bcm_kona_do_smc(u32 service_id, u32 buffer_phys) +{ + register u32 ip asm("ip"); /* Also called r12 */ + register u32 r0 asm("r0"); + register u32 r4 asm("r4"); + register u32 r5 asm("r5"); + register u32 r6 asm("r6"); + + r4 = service_id; + r5 = 0x3; /* Keep IRQ and FIQ off in SM */ + r6 = buffer_phys; + + asm volatile ( + /* Make sure we got the registers we want */ + __asmeq("%0", "ip") + __asmeq("%1", "r0") + __asmeq("%2", "r4") + __asmeq("%3", "r5") + __asmeq("%4", "r6") +#ifdef REQUIRES_SEC + ".arch_extension sec\n" +#endif + " smc #0\n" + : "=r" (ip), "=r" (r0) + : "r" (r4), "r" (r5), "r" (r6) + : "r1", "r2", "r3", "r7", "lr"); + + BUG_ON(ip != SEC_EXIT_NORMAL); + + return r0; +} + /* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */ static void __bcm_kona_smc(void *info) { struct bcm_kona_smc_data *data = info; - u32 *args = bridge_data.bounce; - int rc = 0; + u32 *args = bcm_smc_buffer; - /* Must run on CPU 0 */ BUG_ON(smp_processor_id() != 0); + BUG_ON(!args); - /* Check map in the bounce area */ - BUG_ON(!bridge_data.initialized); - - /* Copy one 32 bit word into the bounce area */ - args[0] = data->arg0; - args[1] = data->arg1; - args[2] = data->arg2; - args[3] = data->arg3; + /* Copy the four 32 bit argument values into the bounce area */ + writel_relaxed(data->arg0, args++); + writel_relaxed(data->arg1, args++); + writel_relaxed(data->arg2, args++); + writel(data->arg3, args); /* Flush caches for input data passed to Secure Monitor */ - if (data->service_id != SSAPI_BRCM_START_VC_CORE) - flush_cache_all(); - - /* Trap into Secure Monitor */ - rc = bcm_kona_smc_asm(data->service_id, bridge_data.buffer_addr); + flush_cache_all(); - if (rc != SEC_ROM_RET_OK) - pr_err("Secure Monitor call failed (0x%x)!\n", rc); + /* Trap into Secure Monitor and record the request result */ + data->result = bcm_kona_do_smc(data->service_id, bcm_smc_buffer_phys); } unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, @@ -106,17 +170,13 @@ unsigned bcm_kona_smc(unsigned service_id, unsigned arg0, unsigned arg1, data.arg1 = arg1; data.arg2 = arg2; data.arg3 = arg3; + data.result = 0; /* * Due to a limitation of the secure monitor, we must use the SMP * infrastructure to forward all secure monitor calls to Core 0. */ - if (get_cpu() != 0) - smp_call_function_single(0, __bcm_kona_smc, (void *)&data, 1); - else - __bcm_kona_smc(&data); + smp_call_function_single(0, __bcm_kona_smc, &data, 1); - put_cpu(); - - return 0; + return data.result; } diff --git a/arch/arm/mach-bcm/bcm_kona_smc.h b/arch/arm/mach-bcm/bcm_kona_smc.h index d098a7e76744..2e29ec67e414 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.h +++ b/arch/arm/mach-bcm/bcm_kona_smc.h @@ -15,55 +15,12 @@ #define BCM_KONA_SMC_H #include <linux/types.h> -#define FLAGS (SEC_ROM_ICACHE_ENABLE_MASK | SEC_ROM_DCACHE_ENABLE_MASK | \ - SEC_ROM_IRQ_ENABLE_MASK | SEC_ROM_FIQ_ENABLE_MASK) -/*! - * Definitions for IRQ & FIQ Mask for ARM - */ - -#define FIQ_IRQ_MASK 0xC0 -#define FIQ_MASK 0x40 -#define IRQ_MASK 0x80 - -/*! - * Secure Mode FLAGs - */ - -/* When set, enables ICache within the secure mode */ -#define SEC_ROM_ICACHE_ENABLE_MASK 0x00000001 - -/* When set, enables DCache within the secure mode */ -#define SEC_ROM_DCACHE_ENABLE_MASK 0x00000002 - -/* When set, enables IRQ within the secure mode */ -#define SEC_ROM_IRQ_ENABLE_MASK 0x00000004 - -/* When set, enables FIQ within the secure mode */ -#define SEC_ROM_FIQ_ENABLE_MASK 0x00000008 - -/* When set, enables Unified L2 cache within the secure mode */ -#define SEC_ROM_UL2_CACHE_ENABLE_MASK 0x00000010 - -/* Broadcom Secure Service API Service IDs */ -#define SSAPI_DORMANT_ENTRY_SERV 0x01000000 -#define SSAPI_PUBLIC_OTP_SERV 0x01000001 -#define SSAPI_ENABLE_L2_CACHE 0x01000002 -#define SSAPI_DISABLE_L2_CACHE 0x01000003 -#define SSAPI_WRITE_SCU_STATUS 0x01000004 -#define SSAPI_WRITE_PWR_GATE 0x01000005 - -/* Broadcom Secure Service API Return Codes */ +/* Broadcom Secure Service API service IDs, return codes, and exit codes */ +#define SSAPI_ENABLE_L2_CACHE 0x01000002 #define SEC_ROM_RET_OK 0x00000001 -#define SEC_ROM_RET_FAIL 0x00000009 - -#define SSAPI_RET_FROM_INT_SERV 0x4 #define SEC_EXIT_NORMAL 0x1 -#define SSAPI_ROW_AES 0x0E000006 -#define SSAPI_BRCM_START_VC_CORE 0x0E000008 - -#ifndef __ASSEMBLY__ extern int __init bcm_kona_smc_init(void); extern unsigned bcm_kona_smc(unsigned service_id, @@ -72,9 +29,4 @@ extern unsigned bcm_kona_smc(unsigned service_id, unsigned arg2, unsigned arg3); -extern int bcm_kona_smc_asm(u32 service_id, - u32 buffer_addr); - -#endif /* __ASSEMBLY__ */ - #endif /* BCM_KONA_SMC_H */ diff --git a/arch/arm/mach-bcm/bcm_kona_smc_asm.S b/arch/arm/mach-bcm/bcm_kona_smc_asm.S deleted file mode 100644 index a1608480d60d..000000000000 --- a/arch/arm/mach-bcm/bcm_kona_smc_asm.S +++ /dev/null @@ -1,41 +0,0 @@ -/* - * Copyright (C) 2013 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/linkage.h> -#include "bcm_kona_smc.h" - -/* - * int bcm_kona_smc_asm(u32 service_id, u32 buffer_addr) - */ - -ENTRY(bcm_kona_smc_asm) - stmfd sp!, {r4-r12, lr} - mov r4, r0 @ service_id - mov r5, #3 @ Keep IRQ and FIQ off in SM - /* - * Since interrupts are disabled in the open mode, we must keep - * interrupts disabled in secure mode by setting R5=0x3. If interrupts - * are enabled in open mode, we can set R5=0x0 to allow interrupts in - * secure mode. If we did this, the secure monitor would return back - * control to the open mode to handle the interrupt prior to completing - * the secure service. If this happened, R12 would not be - * SEC_EXIT_NORMAL and we would need to call SMC again after resetting - * R5 (it gets clobbered by the secure monitor) and setting R4 to - * SSAPI_RET_FROM_INT_SERV to indicate that we want the secure monitor - * to finish up the previous uncompleted secure service. - */ - mov r6, r1 @ buffer_addr - smc #0 - /* Check r12 for SEC_EXIT_NORMAL here if interrupts are enabled */ - ldmfd sp!, {r4-r12, pc} -ENDPROC(bcm_kona_smc_asm) diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index acc1573fd005..f0521cc0640d 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -11,14 +11,13 @@ * GNU General Public License for more details. */ -#include <linux/clocksource.h> #include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/io.h> #include <asm/mach/arch.h> -#include "bcm_kona_smc.h" -#include "kona.h" +#include "kona_l2_cache.h" #define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr" diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 6be54c10f8cb..1ac59fc0cb15 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -17,7 +17,7 @@ #include <asm/mach/arch.h> -#include "kona.h" +#include "kona_l2_cache.h" #define SECWDOG_OFFSET 0x00000000 #define SECWDOG_RESERVED_MASK 0xe2000000 diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona_l2_cache.c index 768bc2837bf5..b31970377c20 100644 --- a/arch/arm/mach-bcm/kona.c +++ b/arch/arm/mach-bcm/kona_l2_cache.c @@ -11,19 +11,18 @@ * GNU General Public License for more details. */ -#include <linux/of_platform.h> + +#include <linux/init.h> +#include <linux/printk.h> #include <asm/hardware/cache-l2x0.h> #include "bcm_kona_smc.h" -#include "kona.h" void __init kona_l2_cache_init(void) { + unsigned int result; int ret; - if (!IS_ENABLED(CONFIG_CACHE_L2X0)) - return; - ret = bcm_kona_smc_init(); if (ret) { pr_info("Secure API not available (%d). Skipping L2 init.\n", @@ -31,7 +30,12 @@ void __init kona_l2_cache_init(void) return; } - bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + result = bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0); + if (result != SEC_ROM_RET_OK) { + pr_err("Secure Monitor call failed (%u)! Skipping L2 init.\n", + result); + return; + } /* * The aux_val and aux_mask have no effect since L2 cache is already diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona_l2_cache.h index 3a7a017c29cd..46f84a95ab1c 100644 --- a/arch/arm/mach-bcm/kona.h +++ b/arch/arm/mach-bcm/kona_l2_cache.h @@ -11,4 +11,8 @@ * GNU General Public License for more details. */ -void __init kona_l2_cache_init(void); +#ifdef CONFIG_ARCH_BCM_MOBILE_L2_CACHE +void kona_l2_cache_init(void); +#else +#define kona_l2_cache_init() ((void)0) +#endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index b0cb0722acd2..101e0f356730 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,11 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select ARM_GIC select GENERIC_IRQ_CHIP select DW_APB_ICTL select DW_APB_TIMER_OF + select PINCTRL if ARCH_BERLIN @@ -14,11 +16,19 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2 config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2CD + +config MACH_BERLIN_BG2Q + bool "Marvell Armada 1500 Pro (BG2-Q)" + select CACHE_L2X0 + select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2Q endmenu diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig index dce8decd5d46..66838f42037f 100644 --- a/arch/arm/mach-cns3xxx/Kconfig +++ b/arch/arm/mach-cns3xxx/Kconfig @@ -1,7 +1,6 @@ config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 select ARM_GIC - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index ecdc7d44fa70..06d63d5651f3 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -350,11 +350,7 @@ static struct davinci_mmc_config dm355evm_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 43bacbf15314..680a7a2d9102 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -208,11 +208,7 @@ static struct davinci_mmc_config dm355leopard_mmc_config = { * you have proper Mini-B or Mini-A cables (or Mini-A adapters) * the ID pin won't need any help. */ -#ifdef CONFIG_USB_MUSB_PERIPHERAL -#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ -#else #define USB_ID_VALUE 1 /* ID pulled low */ -#endif static struct spi_eeprom at25640a = { .byte_len = SZ_64K / 8, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 85399c98f84a..45ce065e7170 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1092,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk) static int da850_round_armrate(struct clk *clk, unsigned long rate) { - int i, ret = 0, diff; + int ret = 0, diff; unsigned int best = (unsigned int) -1; struct cpufreq_frequency_table *table = cpufreq_info.freq_table; + struct cpufreq_frequency_table *pos; rate /= 1000; /* convert to kHz */ - for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) { - diff = table[i].frequency - rate; + cpufreq_for_each_entry(pos, table) { + diff = pos->frequency - rate; if (diff < 0) diff = -diff; if (diff < best) { best = diff; - ret = table[i].frequency; + ret = pos->frequency; } } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 56ea41d5f849..b85b781b05fd 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -134,13 +134,6 @@ struct platform_device da8xx_serial_device[] = { } }; -static s8 da8xx_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1} -}; - static s8 da8xx_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -148,12 +141,6 @@ static s8 da8xx_queue_priority_mapping[][2] = { {-1, -1} }; -static s8 da850_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {-1, -1} -}; - static s8 da850_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -161,12 +148,6 @@ static s8 da850_queue_priority_mapping[][2] = { }; static struct edma_soc_info da830_edma_cc0_info = { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }; @@ -177,22 +158,10 @@ static struct edma_soc_info *da830_edma_info[EDMA_MAX_CC] = { static struct edma_soc_info da850_edma_cc_info[] = { { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = da8xx_queue_tc_mapping, .queue_priority_mapping = da8xx_queue_priority_mapping, .default_queue = EVENTQ_1, }, { - .n_channel = 32, - .n_region = 4, - .n_slot = 128, - .n_tc = 1, - .n_cc = 1, - .queue_tc_mapping = da850_queue_tc_mapping, .queue_priority_mapping = da850_queue_priority_mapping, .default_queue = EVENTQ_0, }, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 07381d8cea62..2f3ed3a58d57 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -569,14 +569,6 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -585,12 +577,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 08a61b938333..0ae8114f5cc9 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -853,16 +853,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM365 */ static s8 -dm365_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm365_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 7}, @@ -873,12 +863,6 @@ dm365_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 256, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm365_queue_tc_mapping, .queue_priority_mapping = dm365_queue_priority_mapping, .default_queue = EVENTQ_3, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5debffba4b24..dc52657909c4 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -499,14 +499,6 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /*----------------------------------------------------------------------*/ static s8 -queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {-1, -1}, -}; - -static s8 queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 3}, @@ -515,12 +507,6 @@ queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 4, - .n_slot = 128, - .n_tc = 2, - .n_cc = 1, - .queue_tc_mapping = queue_tc_mapping, .queue_priority_mapping = queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 332d00d24dc2..6c3bbea7d77d 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -533,16 +533,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { /* Four Transfer Controllers on DM646x */ static s8 -dm646x_queue_tc_mapping[][2] = { - /* {event queue no, TC no} */ - {0, 0}, - {1, 1}, - {2, 2}, - {3, 3}, - {-1, -1}, -}; - -static s8 dm646x_queue_priority_mapping[][2] = { /* {event queue no, Priority} */ {0, 4}, @@ -553,12 +543,6 @@ dm646x_queue_priority_mapping[][2] = { }; static struct edma_soc_info edma_cc0_info = { - .n_channel = 64, - .n_region = 6, /* 0-1, 4-7 */ - .n_slot = 512, - .n_tc = 4, - .n_cc = 1, - .queue_tc_mapping = dm646x_queue_tc_mapping, .queue_priority_mapping = dm646x_queue_priority_mapping, .default_queue = EVENTQ_1, }; diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index bc4344aa1009..4a5a7aedcb76 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *dove_irq_base = IRQ_VIRT_BASE; + +static asmlinkage void +__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init dove_init_irq(void) { int i; @@ -115,6 +147,10 @@ void __init dove_init_irq(void) orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(dove_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-71. */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index fc8bf18e222d..d58995c9a95a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,97 +7,102 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + bool "Samsung EXYNOS" if ARCH_MULTI_V7 + select ARCH_HAS_BANDGAP + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_GIC + select COMMON_CLK_SAMSUNG + select HAVE_ARM_SCU if SMP + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM_RUNTIME + select S5P_DEV_MFC + select SRAM + help + Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" +config ARCH_EXYNOS3 + bool "SAMSUNG EXYNOS3" + select ARM_CPU_SUSPEND if PM + help + Samsung EXYNOS3 (Crotex-A7) SoC based systems + config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y - select ARM_AMBA - select CLKSRC_OF + select ARM_CPU_SUSPEND if PM_SLEEP select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select GIC_NON_BANKED select KEYBOARD_SAMSUNG if INPUT_KEYBOARD - select HAVE_ARM_SCU if SMP - select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC help - Samsung EXYNOS4 SoCs based systems + Samsung EXYNOS4 (Cortex-A9) SoC based systems config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" - select ARM_AMBA - select CLKSRC_OF - select HAVE_ARM_SCU if SMP - select HAVE_SMP - select PINCTRL + default y help - Samsung EXYNOS5 (Cortex-A15) SoC based systems + Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems comment "EXYNOS SoCs" +config SOC_EXYNOS3250 + bool "SAMSUNG EXYNOS3250" + default y + depends on ARCH_EXYNOS3 + config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select ARM_CPU_SUSPEND if PM_SLEEP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4210 CPU support config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4212 SoC support config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4412 SoC support config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC - select SAMSUNG_DMADEV - help - Enable EXYNOS5250 SoC support + +config SOC_EXYNOS5260 + bool "SAMSUNG EXYNOS5260" + default y + depends on ARCH_EXYNOS5 + +config SOC_EXYNOS5410 + bool "SAMSUNG EXYNOS5410" + default y + depends on ARCH_EXYNOS5 config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 - select PM_GENERIC_DOMAINS if PM_RUNTIME - help - Enable EXYNOS5420 SoC support config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_BANDGAP select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR @@ -108,6 +113,19 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support +config SOC_EXYNOS5800 + bool "SAMSUNG EXYNOS5800" + default y + depends on SOC_EXYNOS5420 + endmenu +config EXYNOS5420_MCPM + bool "Exynos5420 Multi-Cluster PM support" + depends on MCPM && SOC_EXYNOS5420 + select ARM_CCI + help + This is needed to provide CPU and cluster power management + on Exynos5420 implementing big.LITTLE. + endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index a656dbe3b78c..788f26d21141 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -5,6 +5,8 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include + obj-y := obj-m := obj-n := @@ -12,20 +14,18 @@ obj- := # Core -obj-$(CONFIG_ARCH_EXYNOS) += exynos.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o -obj-$(CONFIG_CPU_IDLE) += cpuidle.o - -obj-$(CONFIG_ARCH_EXYNOS) += pmu.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o - -obj-$(CONFIG_ARCH_EXYNOS) += exynos-smc.o -obj-$(CONFIG_ARCH_EXYNOS) += firmware.o +CFLAGS_hotplug.o += -march=armv7-a plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) + +obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o +CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 88c619d1e145..16617bdb37a9 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -15,9 +15,107 @@ #include <linux/reboot.h> #include <linux/of.h> +#define EXYNOS3250_SOC_ID 0xE3472000 +#define EXYNOS3_SOC_MASK 0xFFFFF000 + +#define EXYNOS4210_CPU_ID 0x43210000 +#define EXYNOS4212_CPU_ID 0x43220000 +#define EXYNOS4412_CPU_ID 0xE4412200 +#define EXYNOS4_CPU_MASK 0xFFFE0000 + +#define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5410_SOC_ID 0xE5410000 +#define EXYNOS5420_SOC_ID 0xE5420000 +#define EXYNOS5440_SOC_ID 0xE5440000 +#define EXYNOS5800_SOC_ID 0xE5422000 +#define EXYNOS5_SOC_MASK 0xFFFFF000 + +extern unsigned long samsung_cpu_id; + +#define IS_SAMSUNG_CPU(name, id, mask) \ +static inline int is_samsung_##name(void) \ +{ \ + return ((samsung_cpu_id & mask) == (id & mask)); \ +} + +IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) +IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) +IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) + +#if defined(CONFIG_SOC_EXYNOS3250) +# define soc_is_exynos3250() is_samsung_exynos3250() +#else +# define soc_is_exynos3250() 0 +#endif + +#if defined(CONFIG_CPU_EXYNOS4210) +# define soc_is_exynos4210() is_samsung_exynos4210() +#else +# define soc_is_exynos4210() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4212) +# define soc_is_exynos4212() is_samsung_exynos4212() +#else +# define soc_is_exynos4212() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS4412) +# define soc_is_exynos4412() is_samsung_exynos4412() +#else +# define soc_is_exynos4412() 0 +#endif + +#define EXYNOS4210_REV_0 (0x0) +#define EXYNOS4210_REV_1_0 (0x10) +#define EXYNOS4210_REV_1_1 (0x11) + +#if defined(CONFIG_SOC_EXYNOS5250) +# define soc_is_exynos5250() is_samsung_exynos5250() +#else +# define soc_is_exynos5250() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5410) +# define soc_is_exynos5410() is_samsung_exynos5410() +#else +# define soc_is_exynos5410() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5420) +# define soc_is_exynos5420() is_samsung_exynos5420() +#else +# define soc_is_exynos5420() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5440) +# define soc_is_exynos5440() is_samsung_exynos5440() +#else +# define soc_is_exynos5440() 0 +#endif + +#if defined(CONFIG_SOC_EXYNOS5800) +# define soc_is_exynos5800() is_samsung_exynos5800() +#else +# define soc_is_exynos5800() 0 +#endif + +#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ + soc_is_exynos4412()) +#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ + soc_is_exynos5420() || soc_is_exynos5800()) + void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; +extern void __iomem *sysram_ns_base_addr; +extern void __iomem *sysram_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); @@ -61,5 +159,15 @@ struct exynos_pmu_conf { }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void exynos_cpu_power_down(int cpu); +extern void exynos_cpu_power_up(int cpu); +extern int exynos_cpu_power_state(int cpu); +extern void exynos_cluster_power_down(int cluster); +extern void exynos_cluster_power_up(int cluster); +extern int exynos_cluster_power_state(int cluster); +extern void exynos_enter_aftr(void); + +extern void s5p_init_cpu(void __iomem *cpuid_addr); +extern unsigned int samsung_rev(void); #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c deleted file mode 100644 index c57cae0e8779..000000000000 --- a/arch/arm/mach-exynos/cpuidle.c +++ /dev/null @@ -1,256 +0,0 @@ -/* linux/arch/arm/mach-exynos4/cpuidle.c - * - * Copyright (c) 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/cpuidle.h> -#include <linux/cpu_pm.h> -#include <linux/io.h> -#include <linux/export.h> -#include <linux/module.h> -#include <linux/time.h> -#include <linux/platform_device.h> - -#include <asm/proc-fns.h> -#include <asm/smp_scu.h> -#include <asm/suspend.h> -#include <asm/unified.h> -#include <asm/cpuidle.h> - -#include <plat/cpu.h> -#include <plat/pm.h> - -#include <mach/map.h> - -#include "common.h" -#include "regs-pmu.h" - -#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0)) -#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ - S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ - (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1)) - -#define S5P_CHECK_AFTR 0xFCBA0D10 - -#define EXYNOS5_PWR_CTRL1 (S5P_VA_CMU + 0x01020) -#define EXYNOS5_PWR_CTRL2 (S5P_VA_CMU + 0x01024) - -#define PWR_CTRL1_CORE2_DOWN_RATIO (7 << 28) -#define PWR_CTRL1_CORE1_DOWN_RATIO (7 << 16) -#define PWR_CTRL1_DIV2_DOWN_EN (1 << 9) -#define PWR_CTRL1_DIV1_DOWN_EN (1 << 8) -#define PWR_CTRL1_USE_CORE1_WFE (1 << 5) -#define PWR_CTRL1_USE_CORE0_WFE (1 << 4) -#define PWR_CTRL1_USE_CORE1_WFI (1 << 1) -#define PWR_CTRL1_USE_CORE0_WFI (1 << 0) - -#define PWR_CTRL2_DIV2_UP_EN (1 << 25) -#define PWR_CTRL2_DIV1_UP_EN (1 << 24) -#define PWR_CTRL2_DUR_STANDBY2_VAL (1 << 16) -#define PWR_CTRL2_DUR_STANDBY1_VAL (1 << 8) -#define PWR_CTRL2_CORE2_UP_RATIO (1 << 4) -#define PWR_CTRL2_CORE1_UP_RATIO (1 << 0) - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index); - -static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); - -static struct cpuidle_driver exynos4_idle_driver = { - .name = "exynos4_idle", - .owner = THIS_MODULE, - .states = { - [0] = ARM_CPUIDLE_WFI_STATE, - [1] = { - .enter = exynos4_enter_lowpower, - .exit_latency = 300, - .target_residency = 100000, - .flags = CPUIDLE_FLAG_TIME_VALID, - .name = "C1", - .desc = "ARM power down", - }, - }, - .state_count = 2, - .safe_state_index = 0, -}; - -/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ -static void exynos4_set_wakeupmask(void) -{ - __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK); -} - -static unsigned int g_pwr_ctrl, g_diag_reg; - -static void save_cpu_arch_register(void) -{ - /*read power control register*/ - asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc"); - /*read diagnostic register*/ - asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc"); - return; -} - -static void restore_cpu_arch_register(void) -{ - /*write power control register*/ - asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc"); - /*write diagnostic register*/ - asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc"); - return; -} - -static int idle_finisher(unsigned long flags) -{ - cpu_do_idle(); - return 1; -} - -static int exynos4_enter_core0_aftr(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - unsigned long tmp; - - exynos4_set_wakeupmask(); - - /* Set value of power down register for aftr mode */ - exynos_sys_powerdown_conf(SYS_AFTR); - - __raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR); - __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG); - - save_cpu_arch_register(); - - /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - cpu_pm_enter(); - cpu_suspend(0, idle_finisher); - -#ifdef CONFIG_SMP - if (!soc_is_exynos5250()) - scu_enable(S5P_VA_SCU); -#endif - cpu_pm_exit(); - - restore_cpu_arch_register(); - - /* - * If PMU failed while entering sleep mode, WFI will be - * ignored by PMU and then exiting cpu_do_idle(). - * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically - * in this situation. - */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { - tmp |= S5P_CENTRAL_LOWPWR_CFG; - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - } - - /* Clear wakeup state register */ - __raw_writel(0x0, S5P_WAKEUP_STAT); - - return index; -} - -static int exynos4_enter_lowpower(struct cpuidle_device *dev, - struct cpuidle_driver *drv, - int index) -{ - int new_index = index; - - /* AFTR can only be entered when cores other than CPU0 are offline */ - if (num_online_cpus() > 1 || dev->cpu != 0) - new_index = drv->safe_state_index; - - if (new_index == 0) - return arm_cpuidle_simple_enter(dev, drv, new_index); - else - return exynos4_enter_core0_aftr(dev, drv, new_index); -} - -static void __init exynos5_core_down_clk(void) -{ - unsigned int tmp; - - /* - * Enable arm clock down (in idle) and set arm divider - * ratios in WFI/WFE state. - */ - tmp = PWR_CTRL1_CORE2_DOWN_RATIO | \ - PWR_CTRL1_CORE1_DOWN_RATIO | \ - PWR_CTRL1_DIV2_DOWN_EN | \ - PWR_CTRL1_DIV1_DOWN_EN | \ - PWR_CTRL1_USE_CORE1_WFE | \ - PWR_CTRL1_USE_CORE0_WFE | \ - PWR_CTRL1_USE_CORE1_WFI | \ - PWR_CTRL1_USE_CORE0_WFI; - __raw_writel(tmp, EXYNOS5_PWR_CTRL1); - - /* - * Enable arm clock up (on exiting idle). Set arm divider - * ratios when not in idle along with the standby duration - * ratios. - */ - tmp = PWR_CTRL2_DIV2_UP_EN | \ - PWR_CTRL2_DIV1_UP_EN | \ - PWR_CTRL2_DUR_STANDBY2_VAL | \ - PWR_CTRL2_DUR_STANDBY1_VAL | \ - PWR_CTRL2_CORE2_UP_RATIO | \ - PWR_CTRL2_CORE1_UP_RATIO; - __raw_writel(tmp, EXYNOS5_PWR_CTRL2); -} - -static int exynos_cpuidle_probe(struct platform_device *pdev) -{ - int cpu_id, ret; - struct cpuidle_device *device; - - if (soc_is_exynos5250()) - exynos5_core_down_clk(); - - if (soc_is_exynos5440()) - exynos4_idle_driver.state_count = 1; - - ret = cpuidle_register_driver(&exynos4_idle_driver); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle driver\n"); - return ret; - } - - for_each_online_cpu(cpu_id) { - device = &per_cpu(exynos4_cpuidle_device, cpu_id); - device->cpu = cpu_id; - - ret = cpuidle_register_device(device); - if (ret) { - dev_err(&pdev->dev, "failed to register cpuidle device\n"); - return ret; - } - } - - return 0; -} - -static struct platform_driver exynos_cpuidle_driver = { - .probe = exynos_cpuidle_probe, - .driver = { - .name = "exynos_cpuidle", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(exynos_cpuidle_driver); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index a763c0862da9..90aab4d75d08 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -26,8 +26,6 @@ #include <asm/mach/map.h> #include <asm/memory.h> -#include <plat/cpu.h> - #include "common.h" #include "mfc.h" #include "regs-pmu.h" @@ -111,51 +109,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -178,11 +131,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -218,12 +166,16 @@ void exynos_restart(enum reboot_mode mode, const char *cmd) } static struct platform_device exynos_cpuidle = { - .name = "exynos_cpuidle", - .id = -1, + .name = "exynos_cpuidle", + .dev.platform_data = exynos_enter_aftr, + .id = -1, }; void __init exynos_cpuidle_init(void) { + if (soc_is_exynos5440()) + return; + platform_device_register(&exynos_cpuidle); } @@ -247,7 +199,7 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname, { struct map_desc iodesc; __be32 *reg; - unsigned long len; + int len; if (!of_flat_dt_is_compatible(node, "samsung,exynos4210-chipid") && !of_flat_dt_is_compatible(node, "samsung,exynos5440-clock")) @@ -277,20 +229,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) @@ -305,17 +243,6 @@ void __init exynos_init_io(void) exynos_map_io(); } -struct bus_type exynos_subsys = { - .name = "exynos-core", - .dev_name = "exynos-core", -}; - -static int __init exynos_core_init(void) -{ - return subsys_system_register(&exynos_subsys, NULL); -} -core_initcall(exynos_core_init); - static void __init exynos_dt_machine_init(void) { struct device_node *i2c_np; @@ -351,12 +278,15 @@ static void __init exynos_dt_machine_init(void) } static char const *exynos_dt_compat[] __initconst = { + "samsung,exynos3", + "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", "samsung,exynos4212", "samsung,exynos4412", "samsung,exynos5", "samsung,exynos5250", + "samsung,exynos5260", "samsung,exynos5420", "samsung,exynos5440", NULL diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 932129ef26c6..eb91d2350f8c 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -18,6 +18,7 @@ #include <mach/map.h> +#include "common.h" #include "smc.h" static int exynos_do_idle(void) @@ -28,13 +29,36 @@ static int exynos_do_idle(void) static int exynos_cpu_boot(int cpu) { + /* + * Exynos3250 doesn't need to send smc command for secondary CPU boot + * because Exynos3250 removes WFE in secure mode. + */ + if (soc_is_exynos3250()) + return 0; + + /* + * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. + * But, Exynos4212 has only one secondary CPU so second parameter + * isn't used for informing secure firmware about CPU id. + */ + if (soc_is_exynos4212()) + cpu = 0; + exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0); return 0; } static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu; + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c; + + if (!soc_is_exynos4212() && !soc_is_exynos3250()) + boot_reg += 4*cpu; __raw_writel(boot_addr, boot_reg); return 0; diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 5eead530c6f8..69fa48397394 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -19,61 +19,9 @@ #include <asm/cp15.h> #include <asm/smp_plat.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" -static inline void cpu_enter_lowpower_a9(void) -{ - unsigned int v; - - asm volatile( - " mcr p15, 0, %1, c7, c5, 0\n" - " mcr p15, 0, %1, c7, c10, 4\n" - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %3\n" - " mcr p15, 0, %0, c1, c0, 1\n" - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "r" (0), "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - -static inline void cpu_enter_lowpower_a15(void) -{ - unsigned int v; - - asm volatile( - " mrc p15, 0, %0, c1, c0, 0\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - : "=&r" (v) - : "Ir" (CR_C) - : "cc"); - - flush_cache_louis(); - - asm volatile( - /* - * Turn off coherency - */ - " mrc p15, 0, %0, c1, c0, 1\n" - " bic %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (0x40) - : "cc"); - - isb(); - dsb(); -} - static inline void cpu_leave_lowpower(void) { unsigned int v; @@ -96,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* make cpu1 to be turned off at next WFI command */ if (cpu == 1) - __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + exynos_cpu_power_down(cpu); /* * here's the WFI @@ -132,19 +80,8 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) void __ref exynos_cpu_die(unsigned int cpu) { int spurious = 0; - int primary_part = 0; - /* - * we're ready for shutdown now, so do it. - * Exynos4 is A9 based while Exynos5 is A15; check the CPU part - * number by reading the Main ID register and then perform the - * appropriate sequence for entering low power. - */ - asm("mrc p15, 0, %0, c0, c0, 0" : "=r"(primary_part) : : "cc"); - if ((primary_part & 0xfff0) == 0xc0f0) - cpu_enter_lowpower_a15(); - else - cpu_enter_lowpower_a9(); + v7_exit_coherency_flush(louis); platform_do_lowpower(cpu, &spurious); diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c new file mode 100644 index 000000000000..0498d0b887ef --- /dev/null +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -0,0 +1,357 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * arch/arm/mach-exynos/mcpm-exynos.c + * + * Based on arch/arm/mach-vexpress/dcscb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/arm-cci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "regs-pmu.h" +#include "common.h" + +#define EXYNOS5420_CPUS_PER_CLUSTER 4 +#define EXYNOS5420_NR_CLUSTERS 2 +#define MCPM_BOOT_ADDR_OFFSET 0x1c + +/* + * The common v7_exit_coherency_flush API could not be used because of the + * Erratum 799270 workaround. This macro is the same as the common one (in + * arch/arm/include/asm/cacheflush.h) except for the erratum handling. + */ +#define exynos_v7_exit_coherency_flush(level) \ + asm volatile( \ + "stmfd sp!, {fp, ip}\n\t"\ + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \ + "bic r0, r0, #"__stringify(CR_C)"\n\t" \ + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ + "isb\n\t"\ + "bl v7_flush_dcache_"__stringify(level)"\n\t" \ + "clrex\n\t"\ + "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ + "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ + /* Dummy Load of a device register to avoid Erratum 799270 */ \ + "ldr r4, [%0]\n\t" \ + "and r4, r4, #0\n\t" \ + "orr r0, r0, r4\n\t" \ + "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \ + "isb\n\t" \ + "dsb\n\t" \ + "ldmfd sp!, {fp, ip}" \ + : \ + : "Ir" (S5P_INFORM0) \ + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r9", "r10", "lr", "memory") + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int +cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; + +#define exynos_cluster_usecnt(cluster) \ + (cpu_use_count[0][cluster] + \ + cpu_use_count[1][cluster] + \ + cpu_use_count[2][cluster] + \ + cpu_use_count[3][cluster]) + +#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) + +static int exynos_cluster_power_control(unsigned int cluster, int enable) +{ + unsigned int tries = 100; + unsigned int val; + + if (enable) { + exynos_cluster_power_up(cluster); + val = S5P_CORE_LOCAL_PWR_EN; + } else { + exynos_cluster_power_down(cluster); + val = 0; + } + + /* Wait until cluster power control is applied */ + while (tries--) { + if (exynos_cluster_power_state(cluster) == val) + return 0; + + cpu_relax(); + } + pr_debug("timed out waiting for cluster %u to power %s\n", cluster, + enable ? "on" : "off"); + + return -ETIMEDOUT; +} + +static int exynos_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + int err = 0; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&exynos_mcpm_lock); + + cpu_use_count[cpu][cluster]++; + if (cpu_use_count[cpu][cluster] == 1) { + bool was_cluster_down = + (exynos_cluster_usecnt(cluster) == 1); + + /* + * Turn on the cluster (L2/COMMON) and then power on the + * cores. + */ + if (was_cluster_down) + err = exynos_cluster_power_control(cluster, 1); + + if (!err) + exynos_cpu_power_up(cpunr); + else + exynos_cluster_power_control(cluster, 0); + } else if (cpu_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&exynos_mcpm_lock); + local_irq_enable(); + + return err; +} + +/* + * NOTE: This function requires the stack data to be visible through power down + * and can only be executed on processors like A15 and A7 that hit the cache + * with the C bit clear in the SCTLR register. + */ +static void exynos_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + unsigned int cpunr; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&exynos_mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + cpu_use_count[cpu][cluster]--; + if (cpu_use_count[cpu][cluster] == 0) { + exynos_cpu_power_down(cpunr); + + if (exynos_cluster_unused(cluster)) + /* TODO: Turn off the cluster here to save power. */ + last_man = true; + } else if (cpu_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else { + BUG(); + } + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&exynos_mcpm_lock); + + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); + } + + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&exynos_mcpm_lock); + + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +{ + unsigned int tries = 100; + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + /* Wait for the core state to be OFF */ + while (tries--) { + if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(1); + } + + return -ETIMEDOUT; /* timeout */ +} + +static const struct mcpm_platform_ops exynos_power_ops = { + .power_up = exynos_power_up, + .power_down = exynos_power_down, + .wait_for_powerdown = exynos_wait_for_powerdown, +}; + +static void __init exynos_mcpm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + cpu_use_count[cpu][cluster] = 1; +} + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + */ +static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) +{ + asm volatile ("\n" + "cmp r0, #1\n" + "bxne lr\n" + "b cci_enable_port_for_self"); +} + +static const struct of_device_id exynos_dt_mcpm_match[] = { + { .compatible = "samsung,exynos5420" }, + { .compatible = "samsung,exynos5800" }, + {}, +}; + +static int __init exynos_mcpm_init(void) +{ + struct device_node *node; + void __iomem *ns_sram_base_addr; + int ret; + + node = of_find_matching_node(NULL, exynos_dt_mcpm_match); + if (!node) + return -ENODEV; + of_node_put(node); + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-sysram-ns"); + if (!node) + return -ENODEV; + + ns_sram_base_addr = of_iomap(node, 0); + of_node_put(node); + if (!ns_sram_base_addr) { + pr_err("failed to map non-secure iRAM base address\n"); + return -ENOMEM; + } + + /* + * To increase the stability of KFC reset we need to program + * the PMU SPARE3 register + */ + __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); + + exynos_mcpm_usage_count_init(); + + ret = mcpm_platform_register(&exynos_power_ops); + if (!ret) + ret = mcpm_sync_init(exynos_pm_power_up_setup); + if (ret) { + iounmap(ns_sram_base_addr); + return ret; + } + + mcpm_smp_set_ops(); + + pr_info("Exynos MCPM support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + __raw_writel(virt_to_phys(mcpm_entry_point), + ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + + iounmap(ns_sram_base_addr); + + return ret; +} + +early_initcall(exynos_mcpm_init); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 03e5e9f94705..ec02422e8499 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,24 +20,45 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/firmware.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" extern void exynos4_secondary_startup(void); +void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +static void __init exynos_smp_prepare_sysram(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return S5P_INFORM5; - return S5P_VA_SYSRAM; + return sysram_base_addr; } static inline void __iomem *cpu_boot_reg(int cpu) @@ -45,9 +66,11 @@ static inline void __iomem *cpu_boot_reg(int cpu) void __iomem *boot_reg; boot_reg = cpu_boot_reg_base(); + if (!boot_reg) + return ERR_PTR(-ENODEV); if (soc_is_exynos4412()) boot_reg += 4*cpu; - else if (soc_is_exynos5420()) + else if (soc_is_exynos5420() || soc_is_exynos5800()) boot_reg += 4; return boot_reg; } @@ -90,6 +113,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); + int ret = -ENOSYS; /* * Set synchronisation state between this boot processor @@ -107,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(phys_cpu); - if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { - __raw_writel(S5P_CORE_LOCAL_PWR_EN, - S5P_ARM_CORE1_CONFIGURATION); - + if (!exynos_cpu_power_state(cpu)) { + exynos_cpu_power_up(cpu); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while ((__raw_readl(S5P_ARM_CORE1_STATUS) - & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -146,8 +167,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } call_firmware_op(cpu_boot, phys_cpu); @@ -163,9 +194,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ +fail: spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return pen_release != -1 ? ret : 0; } /* @@ -205,6 +237,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); + exynos_smp_prepare_sysram(); + /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits @@ -217,12 +251,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; ++i) { unsigned long phys_cpu; unsigned long boot_addr; + int ret; phys_cpu = cpu_logical_map(i); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + break; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) + break; __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index 15af0ceb0a66..87c0d34c7fba 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/suspend.h> #include <linux/syscore_ops.h> +#include <linux/cpu_pm.h> #include <linux/io.h> #include <linux/irqchip/arm-gic.h> #include <linux/err.h> @@ -26,7 +27,6 @@ #include <asm/smp_scu.h> #include <asm/suspend.h> -#include <plat/cpu.h> #include <plat/pm-common.h> #include <plat/pll.h> #include <plat/regs-srom.h> @@ -100,9 +100,141 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } +/** + * exynos_core_power_down : power down the specified cpu + * @cpu : the cpu to power down + * + * Power down the specified cpu. The sequence must be finished by a + * call to cpu_do_idle() + * + */ +void exynos_cpu_power_down(int cpu) +{ + __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_up : power up the specified cpu + * @cpu : the cpu to power up + * + * Power up the specified cpu + */ +void exynos_cpu_power_up(int cpu) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_state : returns the power state of the cpu + * @cpu : the cpu to retrieve the power state from + * + */ +int exynos_cpu_power_state(int cpu) +{ + return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & + S5P_CORE_LOCAL_PWR_EN); +} + +/** + * exynos_cluster_power_down : power down the specified cluster + * @cluster : the cluster to power down + */ +void exynos_cluster_power_down(int cluster) +{ + __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_up : power up the specified cluster + * @cluster : the cluster to power up + */ +void exynos_cluster_power_up(int cluster) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_state : returns the power state of the cluster + * @cluster : the cluster to retrieve the power state from + * + */ +int exynos_cluster_power_state(int cluster) +{ + return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) & + S5P_CORE_LOCAL_PWR_EN); +} + +#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x24) : S5P_INFORM0)) +#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ + S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \ + (sysram_base_addr + 0x20) : S5P_INFORM1)) + +#define S5P_CHECK_AFTR 0xFCBA0D10 +#define S5P_CHECK_SLEEP 0x00000BAD + +/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */ +static void exynos_set_wakeupmask(long mask) +{ + __raw_writel(mask, S5P_WAKEUP_MASK); +} + +static void exynos_cpu_set_boot_vector(long flags) +{ + __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR); + __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG); +} + +void exynos_enter_aftr(void) +{ + exynos_set_wakeupmask(0x0000ff3e); + exynos_cpu_set_boot_vector(S5P_CHECK_AFTR); + /* Set value of power down register for aftr mode */ + exynos_sys_powerdown_conf(SYS_AFTR); +} + /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; +static void exynos_cpu_save_register(void) +{ + unsigned long tmp; + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + + save_arm_register[1] = tmp; +} + +static void exynos_cpu_restore_register(void) +{ + unsigned long tmp; + + /* Restore Power control register */ + tmp = save_arm_register[0]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); +} + static int exynos_cpu_suspend(unsigned long arg) { #ifdef CONFIG_CACHE_L2X0 @@ -147,37 +279,34 @@ static void exynos_pm_prepare(void) __raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0); } -static int exynos_pm_suspend(void) +static void exynos_pm_central_suspend(void) { unsigned long tmp; /* Setting Central Sequence Register for power down mode */ - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); +} + +static int exynos_pm_suspend(void) +{ + unsigned long tmp; + + exynos_pm_central_suspend(); /* Setting SEQ_OPTION register */ tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0); __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - if (!soc_is_exynos5250()) { - /* Save Power control register */ - asm ("mrc p15, 0, %0, c15, c0, 0" - : "=r" (tmp) : : "cc"); - save_arm_register[0] = tmp; - - /* Save Diagnostic register */ - asm ("mrc p15, 0, %0, c15, c0, 1" - : "=r" (tmp) : : "cc"); - save_arm_register[1] = tmp; - } + if (!soc_is_exynos5250()) + exynos_cpu_save_register(); return 0; } -static void exynos_pm_resume(void) +static int exynos_pm_central_resume(void) { unsigned long tmp; @@ -194,22 +323,20 @@ static void exynos_pm_resume(void) /* clear the wakeup state register */ __raw_writel(0x0, S5P_WAKEUP_STAT); /* No need to perform below restore code */ - goto early_wakeup; - } - if (!soc_is_exynos5250()) { - /* Restore Power control register */ - tmp = save_arm_register[0]; - asm volatile ("mcr p15, 0, %0, c15, c0, 0" - : : "r" (tmp) - : "cc"); - - /* Restore Diagnostic register */ - tmp = save_arm_register[1]; - asm volatile ("mcr p15, 0, %0, c15, c0, 1" - : : "r" (tmp) - : "cc"); + return -1; } + return 0; +} + +static void exynos_pm_resume(void) +{ + if (exynos_pm_central_resume()) + goto early_wakeup; + + if (!soc_is_exynos5250()) + exynos_cpu_restore_register(); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -226,7 +353,7 @@ static void exynos_pm_resume(void) s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save)); - if (IS_ENABLED(CONFIG_SMP) && !soc_is_exynos5250()) + if (!soc_is_exynos5250()) scu_enable(S5P_VA_SCU); early_wakeup: @@ -304,10 +431,42 @@ static const struct platform_suspend_ops exynos_suspend_ops = { .valid = suspend_valid_only_mem, }; +static int exynos_cpu_pm_notifier(struct notifier_block *self, + unsigned long cmd, void *v) +{ + int cpu = smp_processor_id(); + + switch (cmd) { + case CPU_PM_ENTER: + if (cpu == 0) { + exynos_pm_central_suspend(); + exynos_cpu_save_register(); + } + break; + + case CPU_PM_EXIT: + if (cpu == 0) { + if (!soc_is_exynos5250()) + scu_enable(S5P_VA_SCU); + exynos_cpu_restore_register(); + exynos_pm_central_resume(); + } + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block exynos_cpu_pm_notifier_block = { + .notifier_call = exynos_cpu_pm_notifier, +}; + void __init exynos_pm_init(void) { u32 tmp; + cpu_pm_register_notifier(&exynos_cpu_pm_notifier_block); + /* Platform-specific GIC callback */ gic_arch_extn.irq_set_wake = exynos_irq_set_wake; diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 05c7ce15322a..fb0deda3b3a4 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -13,8 +13,6 @@ #include <linux/kernel.h> #include <linux/bug.h> -#include <plat/cpu.h> - #include "common.h" #include "regs-pmu.h" diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 4f6a2560d022..1d13b08708f0 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -38,6 +38,7 @@ #define S5P_INFORM5 S5P_PMUREG(0x0814) #define S5P_INFORM6 S5P_PMUREG(0x0818) #define S5P_INFORM7 S5P_PMUREG(0x081C) +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) #define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) @@ -105,8 +106,17 @@ #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) -#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) -#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ + (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_ARM_CORE_STATUS(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) + +#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500) +#define EXYNOS_COMMON_CONFIGURATION(_nr) \ + (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_COMMON_STATUS(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) @@ -119,8 +129,6 @@ #define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 -#define S5P_CHECK_SLEEP 0x00000BAD - /* Only for EXYNOS4210 */ #define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) @@ -313,4 +321,6 @@ #define EXYNOS5_OPTION_USE_RETENTION (1 << 4) +#define EXYNOS5420_SWRESET_KFC_SEL 0x3 + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5740296dc429..8d42eab76d53 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -702,61 +702,6 @@ endif if ARCH_MULTI_V7 -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - comment "Device tree only" config SOC_IMX50 @@ -768,6 +713,12 @@ config SOC_IMX50 help This enables support for Freescale i.MX50 processor. +config MACH_IMX51_DT + bool "i.MX51 support" + select SOC_IMX51 + help + This enables support for Freescale i.MX51 processor + config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC @@ -796,7 +747,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 @@ -812,6 +762,14 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f4ed83032dd0..bbe93bbfd003 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a @@ -108,11 +109,6 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o -# i.MX5 based machines -obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o - obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 8d1df2e4b7ac..24b103c67f82 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -135,7 +135,7 @@ static __init void avic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) { u32 nivector; @@ -190,6 +190,8 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + set_handle_irq(avic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index a2ecc006b322..4ba587da89d2 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -27,48 +27,61 @@ * parent - fixed parent. No clk_set_parent support */ -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) +struct clk_gate2 { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + unsigned int *share_count; +}; + +#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw) static int clk_gate2_enable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && (*gate->share_count)++ > 0) + goto out; reg = readl(gate->reg); reg |= 3 << gate->bit_idx; writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); return 0; } static void clk_gate2_disable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && --(*gate->share_count) > 0) + goto out; reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); } static int clk_gate2_is_enabled(struct clk_hw *hw) { u32 reg; - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); reg = readl(gate->reg); @@ -87,21 +100,23 @@ static struct clk_ops clk_gate2_ops = { struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate2_flags, spinlock_t *lock) + u8 clk_gate2_flags, spinlock_t *lock, + unsigned int *share_count) { - struct clk_gate *gate; + struct clk_gate2 *gate; struct clk *clk; struct clk_init_data init; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL); if (!gate) return ERR_PTR(-ENOMEM); - /* struct clk_gate assignments */ + /* struct clk_gate2 assignments */ gate->reg = reg; gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + gate->share_count = share_count; init.name = name; init.ops = &clk_gate2_ops; diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 15f9d223cf0b..7f739be3de2c 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -40,12 +40,14 @@ #define SCM_GCCR IO_ADDR_SCM(0xc) static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", }; -static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem", - "fclk", }; +static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", + "prem", "fclk", }; + enum imx1_clks { - dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu, - fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate, - mma_gate, usbd_gate, clk_max + dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate, + spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko, + uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate, + usbd_gate, clk_max }; static struct clk *clk[clk_max]; @@ -62,17 +64,22 @@ int __init mx1_clocks_init(unsigned long fref) clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks)); clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0); + clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0); clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0); + clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1); - clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1); - clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4); - clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3); - clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4); - clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4); - clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7); + clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1); + clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4); + clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3); + clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4); + clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4); + clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7); clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); - clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4); + clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6); + clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5); + clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4); + clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3); clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2); clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1); clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0); @@ -84,9 +91,6 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); - clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); - clk_register_clkdev(clk[mma_gate], "mma", NULL); - clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); clk_register_clkdev(clk[per1], "per", "imx-gpt.0"); clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1], "per", "imx1-uart.0"); @@ -94,20 +98,15 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1], "per", "imx1-uart.1"); clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1"); clk_register_clkdev(clk[per1], "per", "imx1-uart.2"); - clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2"); + clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2"); clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.1"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1"); - clk_register_clkdev(clk[per2], NULL, "imx-mmc.0"); clk_register_clkdev(clk[per2], "per", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0"); - clk_register_clkdev(clk[hclk], "mshc", NULL); - clk_register_clkdev(clk[per3], "ssi", NULL); - clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0"); - clk_register_clkdev(clk[clko], "clko", NULL); mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index dc36e6c2f1da..ae578c096ad8 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -62,6 +62,10 @@ static struct clk_onecell_data clk_data; static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; static const char *per_sel_clks[] = { "ahb", "upll", }; +static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb", + "ipg", "dummy", "dummy", "dummy", + "dummy", "dummy", "per0", "per2", + "per13", "per14", "usbotg_ahb", "dummy",}; enum mx25_clks { dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg, @@ -82,7 +86,7 @@ enum mx25_clks { pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, - wdt_ipg, clk_max + wdt_ipg, cko_div, cko_sel, cko, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +121,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); + clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6); + clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks)); + clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30); clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6); clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6); clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6); @@ -230,6 +237,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); + /* + * Let's initially set up CLKO parent as ipg, since this configuration + * is used on some imx25 board designs to clock the audio codec. + */ + clk_set_parent(clk[cko_sel], clk[ipg]); + return 0; } @@ -304,8 +317,6 @@ int __init mx25_clocks_init(void) int __init mx25_clocks_init_dt(void) { struct device_node *np; - void __iomem *base; - int irq; unsigned long osc_rate = 24000000; /* retrieve the freqency of fixed clocks from device tree */ @@ -325,12 +336,7 @@ int __init mx25_clocks_init_dt(void) __mx25_clocks_init(osc_rate); - np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt")); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index d2da8908b268..317a662626d6 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -82,7 +82,8 @@ enum mx27_clks { csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, - mpll_sel, spll_gate, clk_max + mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate, + rtic_ahb_gate, mshc_baud_gate, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +118,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1); } + clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6); clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4); clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6); clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6); @@ -145,9 +147,11 @@ int __init mx27_clocks_init(unsigned long fref) clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5); clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6); clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7); + clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8); clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9); clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11); clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12); + clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13); clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14); clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15); clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16); @@ -166,6 +170,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29); clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30); clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31); + clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2); clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3); clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4); clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5); @@ -177,6 +182,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11); clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12); clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13); + clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14); clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15); clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16); clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17); @@ -221,16 +227,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5"); clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1"); - clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2"); - clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3"); - clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4"); - clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); @@ -278,14 +274,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0"); clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); - clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); - clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); - clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); - clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); - clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], NULL, "cpu0"); - clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); @@ -296,7 +285,6 @@ int __init mx27_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx27_clocks_init_dt(void) { struct device_node *np; @@ -312,4 +300,3 @@ int __init mx27_clocks_init_dt(void) return mx27_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index b5b65f3efaf1..4a9de0835eb1 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -191,7 +191,6 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx31_clocks_init_dt(void) { struct device_node *np; @@ -207,4 +206,3 @@ int __init mx31_clocks_init_dt(void) return mx31_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a4d5e425cd82..71c86a2f856d 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -289,14 +289,12 @@ int __init mx35_clocks_init(void) return 0; } -static int __init mx35_clocks_init_dt(struct device_node *ccm_node) +static void __init mx35_clocks_init_dt(struct device_node *ccm_node) { clk_data.clks = clk; clk_data.clk_num = ARRAY_SIZE(clk); of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data); mx35_clocks_init(); - - return 0; } CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 568ef0a4de84..21d2b111c83d 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -322,9 +322,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, static void __init mx50_clocks_init(struct device_node *np) { - void __iomem *base; unsigned long r; - int i, irq; + int i; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -372,11 +371,7 @@ static void __init mx50_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt")); } CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init); @@ -436,7 +431,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0"); @@ -492,9 +486,8 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); static void __init mx53_clocks_init(struct device_node *np) { - int i, irq; + int i; unsigned long r; - void __iomem *base; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -561,7 +554,6 @@ static void __init mx53_clocks_init(struct device_node *np) mx5_clocks_common_init(0, 0, 0, 0); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0"); @@ -592,10 +584,6 @@ static void __init mx53_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt")); } CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2b4d6acfa34a..8e795dea02ec 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -107,7 +107,7 @@ enum mx6q_clks { sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, - lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max }; static struct clk *clk[clk_max]; @@ -140,11 +140,13 @@ static struct clk_div_table video_div_table[] = { { /* sentinel */ } }; +static unsigned int share_count_esai; + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i, irq; + int i; int ret; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -352,9 +354,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); - clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); + if (cpu_is_imx6dl()) + /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */ + clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8); + else + clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); + clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai); + clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai); clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); if (cpu_is_imx6dl()) @@ -489,10 +496,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt")); } CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index f7073c0782fb..21cf06cebade 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -169,7 +169,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int irq; int i; int ret; @@ -385,9 +384,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) imx6q_set_lpm(WAIT_CLOCKED); np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(np); } CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c new file mode 100644 index 000000000000..72f8902235d1 --- /dev/null +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -0,0 +1,524 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sx-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" +#include "common.h" + +#define CCDR 0x4 +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) + +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", }; +static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *pcie_axi_sels[] = { "axi", "ahb", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", }; +static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", }; +static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", }; +static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", }; +static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", }; +static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", }; +static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; +static const char *cko1_sels[] = { + "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", + "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix", + "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div", +}; +static const char *cko2_sels[] = { + "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck", + "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core", + "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core", + "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy", + "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial", + "spdif", "asrc", "dummy", +}; +static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", + "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", +}; + +static struct clk *clks[IMX6SX_CLK_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3, + IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3, + IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG, + IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM, + IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4, + IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG, + IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5, + IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG, + IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1, + IMX6SX_CLK_EPIT2, +}; + +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_asrc; +static u32 share_count_audio; +static u32 share_count_esai; + +static void __init imx6sx_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* type name parent_name base div_mask */ + clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework may need to enable/disable usbphy's parent + */ + clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ + clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); + clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); + + clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10); + + clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, + base + 0xe0, 0, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0, + base + 0xe0, 2, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20); + + clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20); + clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21); + + /* name parent_name reg idx */ + clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + /* name parent_name mult div */ + clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + + clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + imx6q_pm_set_ccm_base(base); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); + clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels)); + clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); + clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels)); + clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels)); + clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels)); + clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); + clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels)); + clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels)); + clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels)); + clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels)); + clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels)); + clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels)); + clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels)); + clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); + clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); + clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); + clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); + + clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT); + + /* name parent_name reg shift width */ + clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3); + clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3); + clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3); + clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3); + clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); + clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3); + clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2); + clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6); + clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); + clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); + clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); + clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3); + clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6); + clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3); + clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3); + clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3); + clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3); + clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3); + clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3); + clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3); + clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); + clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); + clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); + + clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + /* name reg shift width busy: reg, shift parent_names num_parents */ + clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + /* name parent_name reg shift width busy: reg, shift */ + clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + + /* name parent_name reg shift */ + /* CCGR0 */ + clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); + clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); + clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); + clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); + clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); + clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16); + clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); + clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20); + clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24); + clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26); + clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + + /* CCGR1 */ + clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8); + clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18); + clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20); + clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); + clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26); + clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30); + + /* CCGR2 */ + clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2); + clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14); + clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16); + clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18); + clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20); + clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22); + clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28); + clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2); + clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); + clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4); + clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6); + clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8); + clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10); + clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12); + clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); + clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18); + clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0); + clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10); + clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); + clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); + clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); + clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); + clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28); + clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + + /* CCGR5 */ + clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); + clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26); + clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30); + clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30); + + /* CCGR6 */ + clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); + clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16); + clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20); + clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22); + clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24); + clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26); + clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28); + clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30); + + clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); + clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0"); + clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]); + } + + /* Set the default 132MHz for EIM module */ + clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000); + + /* set parent clock for LCDIF1 pixel clock */ + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]); + + /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ + if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M])) + pr_err("Failed to set pcie bus parent clk.\n"); + if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI])) + pr_err("Failed to set pcie parent clk.\n"); + + /* + * Init enet system AHB clock, set to 200Mhz + * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB + */ + clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]); + clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000); + clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000); + clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000); + + /* Audio clocks */ + clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000); + + clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000); + + clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000); + + clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000); + + clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000); + + /* Set parent clock for vadc */ + clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + + /* default parent of can_sel clock is invalid, manually set it here */ + clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]); + + /* Update gpu clock from default 528M to 720M */ + clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt"); + mxc_timer_init_dt(np); +} +CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 048c5ad8a80b..e29f6ebe9f39 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -28,7 +28,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock); + u8 clk_gate_flags, spinlock_t *lock, + unsigned int *share_count); struct clk * imx_obtain_fixed_clock( const char *name, unsigned long rate); @@ -37,7 +38,15 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock); + shift, 0, &imx_ccm_lock, NULL); +} + +static inline struct clk *imx_clk_gate2_shared(const char *name, + const char *parent, void __iomem *reg, u8 shift, + unsigned int *share_count) +{ + return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, + shift, 0, &imx_ccm_lock, share_count); } struct clk *imx_clk_pfd(const char *name, const char *parent_name, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index b5241ea76706..9ab785ce13e8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -17,6 +17,7 @@ struct irq_data; struct platform_device; struct pt_regs; struct clk; +struct device_node; enum mxc_cpu_pwr_mode; void mx1_map_io(void); @@ -56,6 +57,7 @@ void imx51_init_late(void); void imx53_init_late(void); void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); +void mxc_timer_init_dt(struct device_node *); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx25_clocks_init(void); @@ -99,19 +101,6 @@ enum mx3_cpu_pwr_mode { void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); void imx_print_silicon_rev(const char *cpu, int srev); -void avic_handle_irq(struct pt_regs *); -void tzic_handle_irq(struct pt_regs *); - -#define imx1_handle_irq avic_handle_irq -#define imx21_handle_irq avic_handle_irq -#define imx25_handle_irq avic_handle_irq -#define imx27_handle_irq avic_handle_irq -#define imx31_handle_irq avic_handle_irq -#define imx35_handle_irq avic_handle_irq -#define imx50_handle_irq tzic_handle_irq -#define imx51_handle_irq tzic_handle_irq -#define imx53_handle_irq tzic_handle_irq - void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index ba3b498a67ec..bbe8ff1f0412 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6DL: soc_id = "i.MX6DL"; break; + case MXC_CPU_IMX6SX: + soc_id = "i.MX6SX"; + break; case MXC_CPU_IMX6Q: soc_id = "i.MX6Q"; break; diff --git a/arch/arm/mach-imx/devices/platform-ipu-core.c b/arch/arm/mach-imx/devices/platform-ipu-core.c index fc4dd7cedc11..6bd7c3f37ac0 100644 --- a/arch/arm/mach-imx/devices/platform-ipu-core.c +++ b/arch/arm/mach-imx/devices/platform-ipu-core.c @@ -77,7 +77,7 @@ struct platform_device *__init imx_alloc_mx3_camera( pdev = platform_device_alloc("mx3-camera", 0); if (!pdev) - goto err; + return ERR_PTR(-ENOMEM); pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); if (!pdev->dev.dma_mask) diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 11bd01d402f2..0dc0651825b1 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -12,7 +12,7 @@ #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ .iobase = soc ## _EMMAPRP_BASE_ADDR, \ - .iosize = SZ_32, \ + .iosize = SZ_256, \ .irq = soc ## _INT_EMMAPRP, \ } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c deleted file mode 100644 index 9be6c1e69d68..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <video/platform_lcd.h> -#include <linux/backlight.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { - /* LED */ - MX51_PAD_NANDF_D10__GPIO3_30, - /* SWITCH */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - /* UART 3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_KEY_COL4__UART3_RTS, - MX51_PAD_KEY_COL5__UART3_CTS, - /* SD */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* SSI */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, - /* LCD Backlight */ - MX51_PAD_DI1_D1_CS__GPIO3_4, - /* LCD RST */ - MX51_PAD_CSI1_D9__GPIO3_13, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 30) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) -#define GPIO_LCDRST IMX_GPIO_NR(3, 13) -#define GPIO_LCDBL IMX_GPIO_NR(3, 4) - -static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDRST, 1); - else - gpio_direction_output(GPIO_LCDRST, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = { - .set_power = eukrea_mbimxsd51_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd51_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data, -}; - -static void eukrea_mbimxsd51_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_LCDBL, 1); - else - gpio_direction_output(GPIO_LCDBL, 0); -} - -static struct generic_bl_info eukrea_mbimxsd51_bl_info = { - .name = "eukrea_mbimxsd51-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimxsd51_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimxsd51_bl_info, - }, -}; - -static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd51_led_info __initconst = { - .leds = eukrea_mbimxsd51_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd51_button_data __initconst = { - .buttons = eukrea_mbimxsd51_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static int screen_type; - -static int __init eukrea_mbimxsd51_screen_type(char *options) -{ - if (!strcmp(options, "dvi")) - screen_type = 1; - else if (!strcmp(options, "tft")) - screen_type = 0; - - return 0; -} -__setup("screen_type=", eukrea_mbimxsd51_screen_type); - -/* - * system init for baseboard usage. Will be called by cpuimx51sd init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd51_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads, - ARRAY_SIZE(eukrea_mbimxsd51_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - imx51_add_sdhci_esdhc_imx(0, NULL); - - imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDRST, "LCDRST"); - gpio_direction_output(GPIO_LCDRST, 0); - gpio_request(GPIO_LCDBL, "LCDBL"); - gpio_direction_output(GPIO_LCDBL, 0); - if (!screen_type) { - platform_device_register(&eukrea_mbimxsd51_bl_dev); - platform_device_register(&eukrea_mbimxsd51_lcd_powerdev); - } else { - gpio_free(GPIO_LCDRST); - gpio_free(GPIO_LCDBL); - } - - i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices)); - - gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 3e1ec5ffe630..42a65e067443 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = imx25_timer_init, .init_machine = imx25_dt_init, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 4e235ecb4021..17bd4058133d 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = imx27_timer_init, .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index e1e70ef7bc2d..581f4d6c9b8a 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -39,7 +39,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_init, .dt_compat = imx31_dt_board_compat, diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index 9d48e0065a63..a62854c59240 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = imx35_irq_init, - .handle_irq = imx35_handle_irq, .init_machine = imx35_dt_init, .dt_compat = imx35_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 0230d78d1413..b8cd968faa52 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 067580b2969b..ebbb5ab63529 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -142,7 +142,6 @@ MACHINE_START(APF9328, "Armadeus APF9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = apf9328_timer_init, .init_machine = apf9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 58b864a3fc20..39406b7e3228 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -562,7 +562,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 2d00476f7d2c..c97d7cb39135 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -57,7 +57,6 @@ MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = bug_timer_init, .init_machine = bug_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index ea50870bda80..75b7b6aa2720 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -314,7 +314,6 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = eukrea_cpuimx27_timer_init, .init_machine = eukrea_cpuimx27_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 65e4c53e1554..1ffa27169045 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -199,7 +199,6 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = eukrea_cpuimx35_timer_init, .init_machine = eukrea_cpuimx35_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c deleted file mode 100644 index 1fba2b8e983f..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> - * - * based on board-mx51_babbage.c which is - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/i2c-gpio.h> -#include <linux/spi/spi.h> -#include <linux/can/platform/mcp251x.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define USBH1_RST IMX_GPIO_NR(2, 28) -#define ETH_RST IMX_GPIO_NR(2, 31) -#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12) -#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0) -#define CAN_IRQGPIO IMX_GPIO_NR(1, 1) -#define CAN_RST IMX_GPIO_NR(4, 15) -#define CAN_NCS IMX_GPIO_NR(4, 24) -#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4) -#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12) -#define CAN_RX1BF IMX_GPIO_NR(1, 6) -#define CAN_TXORTS IMX_GPIO_NR(1, 7) -#define CAN_TX1RTS IMX_GPIO_NR(1, 8) -#define CAN_TX2RTS IMX_GPIO_NR(1, 9) -#define I2C_SCL IMX_GPIO_NR(4, 16) -#define I2C_SDA IMX_GPIO_NR(4, 17) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */ - - /* FEC */ - MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */ - - /* HSI2C */ - MX51_PAD_I2C1_CLK__GPIO4_16, - MX51_PAD_I2C1_DAT__GPIO4_17, - - /* I2C1 */ - MX51_PAD_SD2_CMD__I2C1_SCL, - MX51_PAD_SD2_CLK__I2C1_SDA, - - /* CAN */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */ - MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */ - MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */ - MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_7__GPIO1_7, - MX51_PAD_GPIO1_8__GPIO1_8, - MX51_PAD_GPIO1_9__GPIO1_9, - - /* Touchscreen */ - /* IRQ */ - NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int tsc2007_get_pendown_state(struct device *dev) -{ - if (mx51_revision() < IMX_CHIP_REVISION_3_0) - return !gpio_get_value(TSC2007_IRQGPIO_REV2); - else - return !gpio_get_value(TSC2007_IRQGPIO_REV3); -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x49), - .platform_data = &tsc2007_info, - }, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx51sd_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx51sd_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = I2C_SDA, - .sda_is_open_drain = 0, - .scl_pin = I2C_SCL, - .scl_is_open_drain = 0, - .udelay = 2, -}; - -static struct platform_device hsi2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -static struct mcp251x_platform_data mcp251x_info = { - .oscillator_frequency = 24E6, -}; - -static struct spi_board_info cpuimx51sd_spi_device[] = { - { - .modalias = "mcp2515", - .max_speed_hz = 10000000, - .bus_num = 0, - .mode = SPI_MODE_0, - .chip_select = 0, - .platform_data = &mcp251x_info, - /* irq number is run-time assigned */ - }, -}; - -static int cpuimx51sd_spi1_cs[] = { - CAN_NCS, -}; - -static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = { - .chipselect = cpuimx51sd_spi1_cs, - .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs), -}; - -static struct platform_device *rev2_platform_devices[] __initdata = { - &hsi2c_gpio_device, -}; - -static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static void __init eukrea_cpuimx51sd_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, - ARRAY_SIZE(eukrea_cpuimx51sd_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0); - - gpio_request(ETH_RST, "eth_rst"); - gpio_set_value(ETH_RST, 1); - imx51_add_fec(NULL); - - gpio_request(CAN_IRQGPIO, "can_irq"); - gpio_direction_input(CAN_IRQGPIO); - gpio_free(CAN_IRQGPIO); - gpio_request(CAN_NCS, "can_ncs"); - gpio_direction_output(CAN_NCS, 1); - gpio_free(CAN_NCS); - gpio_request(CAN_RST, "can_rst"); - gpio_direction_output(CAN_RST, 0); - msleep(20); - gpio_set_value(CAN_RST, 1); - imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); - cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); - spi_register_board_info(cpuimx51sd_spi_device, - ARRAY_SIZE(cpuimx51sd_spi_device)); - - if (mx51_revision() < IMX_CHIP_REVISION_3_0) { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV2), - platform_add_devices(rev2_platform_devices, - ARRAY_SIZE(rev2_platform_devices)); - gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV2); - gpio_free(TSC2007_IRQGPIO_REV2); - } else { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV3), - imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data); - gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV3); - gpio_free(TSC2007_IRQGPIO_REV3); - } - - i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices)); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_request(USBH1_RST, "usb_rst"); - gpio_direction_output(USBH1_RST, 0); - msleep(20); - gpio_set_value(USBH1_RST, 1); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD - eukrea_mbimxsd51_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx51sd_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") - /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = eukrea_cpuimx51sd_timer_init, - .init_machine = eukrea_cpuimx51sd_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 4bf454424249..e978dda1434c 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -165,7 +165,6 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = eukrea_cpuimx25_timer_init, .init_machine = eukrea_cpuimx25_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 97f9c6297fcf..b61bd8ed5568 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -604,7 +604,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 1a851aea6832..bb3ca0429680 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -71,7 +71,6 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ipcam_timer_init, .init_machine = mx27ipcam_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 3da2e3e44ce9..9992089d3ad1 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -77,7 +77,6 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27lite_timer_init, .init_machine = mx27lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index 77b77a92bb5d..b899c0b59afd 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -31,7 +31,6 @@ static const char *imx50_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") .map_io = mx53_map_io, .init_irq = mx53_init_irq, - .handle_irq = imx50_handle_irq, .init_machine = imx50_dt_init, .dt_compat = imx50_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 65850908a4b4..2bad387956c0 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -40,7 +40,6 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c new file mode 100644 index 000000000000..02fccf6033ac --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -0,0 +1,51 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6sx_init_machine(void) +{ + struct device *parent; + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx_anatop_init(); +} + +static void __init imx6sx_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + imx_gpc_init(); + irqchip_init(); +} + +static const char *imx6sx_dt_compat[] __initconst = { + "fsl,imx6sx", + NULL, +}; + +DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = imx6sx_init_irq, + .init_machine = imx6sx_init_machine, + .dt_compat = imx6sx_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index c7bc41d6b468..31df4361996f 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -289,7 +289,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 9f883e4d6fc9..77fda3de4290 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -138,7 +138,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, @@ -149,7 +148,6 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index a06aa4dc37fc..703ce31d7379 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -17,51 +17,46 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> #include "common.h" #include "devices-imx21.h" #include "hardware.h" #include "iomux-mx21.h" -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE 0xc00000 - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) -#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) +#define MX21ADS_MMGPIO_BASE (6 * 32) /* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) static const int mx21ads_pins[] __initconst = { @@ -143,11 +138,8 @@ static struct physmap_flash_data mx21ads_flash_data = { .width = 4, }; -static struct resource mx21ads_flash_resource = { - .start = MX21_CS0_BASE_ADDR, - .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource mx21ads_flash_resource = + DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M); static struct platform_device mx21ads_nor_mtd_device = { .name = "physmap-flash", @@ -160,7 +152,7 @@ static struct platform_device mx21ads_nor_mtd_device = { }; static struct resource mx21ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K), /* irq number is run-time assigned */ DEFINE_RES_IRQ(-1), }; @@ -179,24 +171,50 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = { static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; -static int mx21ads_fb_init(struct platform_device *pdev) -{ - u16 tmp; +static struct resource mx21ads_mmgpio_resource = + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); - tmp = __raw_readw(MX21ADS_IO_REG); - tmp |= MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); - return 0; -} +static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .base = MX21ADS_MMGPIO_BASE, + .ngpio = 16, +}; -static void mx21ads_fb_exit(struct platform_device *pdev) -{ - u16 tmp; +static struct platform_device mx21ads_mmgpio = { + .name = "basic-mmio-gpio", + .id = PLATFORM_DEVID_AUTO, + .resource = &mx21ads_mmgpio_resource, + .num_resources = 1, + .dev = { + .platform_data = &mx21ads_mmgpio_pdata, + }, +}; - tmp = __raw_readw(MX21ADS_IO_REG); - tmp &= ~MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); -} +static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx21ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &mx21ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX21ADS_IO_LCDON, + .enable_high = 1, + .init_data = &mx21ads_lcd_regulator_init_data, +}; + +static struct platform_device mx21ads_lcd_regulator = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &mx21ads_lcd_regulator_pdata, + }, +}; /* * Connected is a portrait Sharp-QVGA display @@ -229,26 +247,30 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { .pwmr = 0x00a903ff, .lscr1 = 0x00120300, .dmacr = 0x00020008, - - .init = mx21ads_fb_init, - .exit = mx21ads_fb_exit, }; static int mx21ads_sdhc_get_ro(struct device *dev) { - return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; + return gpio_get_value(MX21ADS_IO_SD_WP); } static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); + int ret; + + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); + if (ret) + return ret; + + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); + gpio_free(MX21ADS_IO_SD_WP); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -264,29 +286,9 @@ mx21ads_nand_board_info __initconst = { .hw_ecc = 1, }; -static struct map_desc mx21ads_io_desc[] __initdata = { - /* - * Memory-mapped I/O on MX21ADS Base board: - * - CS8900A Ethernet controller - * - ST16C2552CJ UART - * - CPU and Base board version - * - Base board I/O register - */ - { - .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), - .length = MX21ADS_MMIO_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init mx21ads_map_io(void) -{ - mx21_map_io(); - iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); -} - static struct platform_device *platform_devices[] __initdata = { + &mx21ads_mmgpio, + &mx21ads_lcd_regulator, &mx21ads_nor_mtd_device, }; @@ -300,12 +302,13 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_imx_fb(&mx21ads_fb_data); imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx21_add_imx_fb(&mx21ads_fb_data); + mx21ads_cs8900_resources[1].start = gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); mx21ads_cs8900_resources[1].end = @@ -321,10 +324,9 @@ static void __init mx21ads_timer_init(void) MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, - .map_io = mx21ads_map_io, + .map_io = mx21_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, - .handle_irq = imx21_handle_irq, .init_time = mx21ads_timer_init, .init_machine = mx21ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 13490c203050..ea1fa199c148 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -263,7 +263,6 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = mx25pdk_timer_init, .init_machine = mx25pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 25b3e4c9bc0a..435a5428a678 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -544,7 +544,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a7a4a9c67615..2f834ce8f39c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -391,7 +391,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 50044a21b388..4217871a9653 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -775,7 +775,6 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index daf8889125cc..d08c37c696f6 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -582,7 +582,6 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 832b1e2f964e..eee042fa2768 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -308,7 +308,6 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lilly_timer_init, .init_machine = mx31lilly_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index bea07299b61a..fa15d0b6118d 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -291,7 +291,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 8f45afe785f8..08730f238449 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -600,7 +600,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index a42f4f07051f..4e8b184d773b 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -615,7 +615,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, .reserve = mx35_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c deleted file mode 100644 index f3d264a636fa..000000000000 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) -#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) -#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5) -#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14) -#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) -#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) -#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) -#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) -#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static struct gpio_keys_button babbage_buttons[] = { - { - .gpio = BABBAGE_POWER_KEY, - .code = BTN_0, - .desc = "PWR", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data imx_button_data __initconst = { - .buttons = babbage_buttons, - .nbuttons = ARRAY_SIZE(babbage_buttons), -}; - -static iomux_v3_cfg_t mx51babbage_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - - /* UART3 */ - MX51_PAD_EIM_D25__UART3_RXD, - MX51_PAD_EIM_D26__UART3_TXD, - MX51_PAD_EIM_D27__UART3_RTS, - MX51_PAD_EIM_D24__UART3_CTS, - - /* I2C1 */ - MX51_PAD_EIM_D16__I2C1_SDA, - MX51_PAD_EIM_D19__I2C1_SCL, - - /* I2C2 */ - MX51_PAD_KEY_COL4__I2C2_SCL, - MX51_PAD_KEY_COL5__I2C2_SDA, - - /* HSI2C */ - MX51_PAD_I2C1_CLK__I2C1_CLK, - MX51_PAD_I2C1_DAT__I2C1_DAT, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB reset line*/ - MX51_PAD_GPIO1_7__GPIO1_7, - - /* USB PHY reset line */ - MX51_PAD_EIM_D21__GPIO2_5, - - /* FEC */ - MX51_PAD_EIM_EB2__FEC_MDIO, - MX51_PAD_EIM_EB3__FEC_RDATA1, - MX51_PAD_EIM_CS2__FEC_RDATA2, - MX51_PAD_EIM_CS3__FEC_RDATA3, - MX51_PAD_EIM_CS4__FEC_RX_ER, - MX51_PAD_EIM_CS5__FEC_CRS, - MX51_PAD_NANDF_RB2__FEC_COL, - MX51_PAD_NANDF_RB3__FEC_RX_CLK, - MX51_PAD_NANDF_D9__FEC_RDATA0, - MX51_PAD_NANDF_D8__FEC_TDATA0, - MX51_PAD_NANDF_CS2__FEC_TX_ER, - MX51_PAD_NANDF_CS3__FEC_MDC, - MX51_PAD_NANDF_CS4__FEC_TDATA1, - MX51_PAD_NANDF_CS5__FEC_TDATA2, - MX51_PAD_NANDF_CS6__FEC_TDATA3, - MX51_PAD_NANDF_CS7__FEC_TX_EN, - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, - - /* FEC PHY reset line */ - MX51_PAD_EIM_A20__GPIO2_14, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* CD/WP from controller */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - /* CD/WP gpio */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_5__GPIO1_5, - - /* eCSPI1 */ - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - - /* Audio */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data babbage_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = { - .bitrate = 400000, -}; - -static struct gpio mx51_babbage_usbh1_gpios[] = { - { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" }, - { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" }, -}; - -static int gpio_usbh1_active(void) -{ - iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27; - int ret; - - /* Set USBH1_STP to GPIO and toggle it */ - mxc_iomux_v3_setup_pad(usbh1stp_gpio); - ret = gpio_request_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - - if (ret) { - pr_debug("failed to get USBH1 pins: %d\n", ret); - return ret; - } - - msleep(100); - gpio_set_value(BABBAGE_USBH1_STP, 1); - gpio_set_value(BABBAGE_USB_PHY_RESET, 1); - gpio_free_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - return 0; -} - -static inline void babbage_usbhub_reset(void) -{ - int ret; - - /* Reset USB hub */ - ret = gpio_request_one(BABBAGE_USB_HUB_RESET, - GPIOF_OUT_INIT_LOW, "GPIO1_7"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); - return; - } - - msleep(2); - /* Deassert reset */ - gpio_set_value(BABBAGE_USB_HUB_RESET, 1); -} - -static inline void babbage_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(BABBAGE_FEC_PHY_RESET, - GPIOF_OUT_INIT_LOW, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); -} - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come externally from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init babbage_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", babbage_otg_mode); - -static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx51_babbage_spi_cs[] = { - BABBAGE_ECSPI1_CS0, - BABBAGE_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { - .chipselect = mx51_babbage_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), -}; - -static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { - .cd_gpio = BABBAGE_SD2_CD, - .wp_gpio = BABBAGE_SD2_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -void __init imx51_babbage_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, - ARRAY_SIZE(mx51babbage_pads)); -} - -/* - * Board specific initialization. - */ -static void __init mx51_babbage_init(void) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); - - imx51_soc_init(); - - imx51_babbage_common_init(); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - babbage_fec_reset(); - imx51_add_fec(NULL); - - /* Set the PAD settings for the pwr key. */ - mxc_iomux_v3_setup_pad(power_key); - imx_add_gpio_keys(&imx_button_data); - - imx51_add_imx_i2c(0, &babbage_i2c_data); - imx51_add_imx_i2c(1, &babbage_i2c_data); - imx51_add_hsi2c(&babbage_hsi2c_data); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_usbh1_active(); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - /* setback USBH1_STP to be function */ - mxc_iomux_v3_setup_pad(usbh1stp); - babbage_usbhub_reset(); - - imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); - imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); - - spi_register_board_info(mx51_babbage_spi_board_info, - ARRAY_SIZE(mx51_babbage_spi_board_info)); - imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0); -} - -static void __init mx51_babbage_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") - /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = mx51_babbage_timer_init, - .init_machine = mx51_babbage_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c91894003da9..0b5d1ca31b9f 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -267,7 +267,6 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mxt_td60_timer_init, .init_machine = mxt_td60_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bf3ac51d5aca..12212378c672 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -245,8 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, int ret; ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "imx-mmc-detect", data); + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) printk(KERN_ERR "pca100: Failed to request irq for sd/mmc detection\n"); @@ -421,7 +420,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .init_time = pca100_timer_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 639a3dfb0092..81b8affb9448 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -703,7 +703,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = pcm037_timer_init, .init_machine = pcm037_init, .init_late = pcm037_init_late, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 592ddbe031ac..6c56fb5553c7 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -351,7 +351,6 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = pcm038_timer_init, .init_machine = pcm038_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index ac504b67326b..c62b5d261345 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -400,7 +400,6 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = pcm043_timer_init, .init_machine = pcm043_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 22af27ed457e..a213e7b9cb1c 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -266,7 +266,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = qong_timer_init, .init_machine = qong_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index b0fa10dd79fe..1f6bc3f7ae14 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -137,7 +137,6 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = scb9328_timer_init, .init_machine = scb9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 8825d1217d18..872b3c6ba408 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -310,7 +310,6 @@ MACHINE_START(VPR200, "VPR200") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index b08ab3ad4a6d..75d6a37e1ae4 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -36,6 +36,7 @@ #define MXC_CPU_MX53 53 #define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define IMX_CHIP_REVISION_1_0 0x10 @@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void) return __mxc_cpu_type == MXC_CPU_IMX6DL; } +static inline bool cpu_is_imx6sx(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SX; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 65222ea0df6d..bed081e58262 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -28,6 +28,9 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -328,3 +331,15 @@ void __init mxc_timer_init(void __iomem *base, int irq) /* Make irqs happen */ setup_irq(irq, &mxc_timer_irq); } + +void __init mxc_timer_init_dt(struct device_node *np) +{ + void __iomem *base; + int irq; + + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + + mxc_timer_init(base, irq); +} diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 8183178d5aa3..7828af4b2022 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -125,7 +125,7 @@ static __init void tzic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) { u32 stat; int i, irqofs, handled; @@ -189,6 +189,8 @@ void __init tzic_init_irq(void __iomem *irqbase) for (i = 0; i < 4; i++, irq_base += 32) tzic_init_gc(i, irq_base); + set_handle_irq(tzic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h index 054e7acb5bfa..e8d24d32121a 100644 --- a/arch/arm/mach-iop13xx/include/mach/irqs.h +++ b/arch/arm/mach-iop13xx/include/mach/irqs.h @@ -191,6 +191,4 @@ static inline u32 read_intpnd_3(void) #define NR_IOP13XX_IRQS (IRQ_IOP13XX_HPI + 1) #endif -#define NR_IRQS NR_IOP13XX_IRQS - #endif /* _IOP13XX_IRQ_H_ */ diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index f1c00d6d560b..15bc9bb78a6b 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -1,5 +1,8 @@ #ifndef _IOP13XX_TIME_H_ #define _IOP13XX_TIME_H_ + +#include <mach/irqs.h> + #define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0 #define IOP_TMR_EN 0x02 diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 02a8228ac2d3..9cd07d396093 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -93,4 +93,5 @@ MACHINE_START(IQ81340MC, "Intel IQ81340MC") .init_time = iq81340mc_timer_init, .init_machine = iq81340mc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 1b80f10722b3..b3ec11cb707e 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -95,4 +95,5 @@ MACHINE_START(IQ81340SC, "Intel IQ81340SC") .init_time = iq81340sc_timer_init, .init_machine = iq81340sc_init, .restart = iop13xx_restart, + .nr_irqs = NR_IOP13XX_IRQS, MACHINE_END diff --git a/arch/arm/mach-iop13xx/msi.c b/arch/arm/mach-iop13xx/msi.c index 560d5b2dec22..e7730cf9c15d 100644 --- a/arch/arm/mach-iop13xx/msi.c +++ b/arch/arm/mach-iop13xx/msi.c @@ -23,10 +23,7 @@ #include <linux/msi.h> #include <asm/mach/irq.h> #include <asm/irq.h> - - -#define IOP13XX_NUM_MSI_IRQS 128 -static DECLARE_BITMAP(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); +#include <mach/irqs.h> /* IMIPR0 CP6 R8 Page 1 */ @@ -121,41 +118,6 @@ void __init iop13xx_msi_init(void) irq_set_chained_handler(IRQ_IOP13XX_INBD_MSI, iop13xx_msi_handler); } -/* - * Dynamic irq allocate and deallocation - */ -int create_irq(void) -{ - int irq, pos; - -again: - pos = find_first_zero_bit(msi_irq_in_use, IOP13XX_NUM_MSI_IRQS); - irq = IRQ_IOP13XX_MSI_0 + pos; - if (irq > NR_IRQS) - return -ENOSPC; - /* test_and_set_bit operates on 32-bits at a time */ - if (test_and_set_bit(pos, msi_irq_in_use)) - goto again; - - dynamic_irq_init(irq); - - return irq; -} - -void destroy_irq(unsigned int irq) -{ - int pos = irq - IRQ_IOP13XX_MSI_0; - - dynamic_irq_cleanup(irq); - - clear_bit(pos, msi_irq_in_use); -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - static void iop13xx_msi_nop(struct irq_data *d) { return; @@ -172,12 +134,17 @@ static struct irq_chip iop13xx_msi_chip = { int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) { - int id, irq = create_irq(); + int id, irq = irq_alloc_desc_from(IRQ_IOP13XX_MSI_0, -1); struct msi_msg msg; if (irq < 0) return irq; + if (irq >= NR_IOP13XX_IRQS) { + irq_free_desc(irq); + return -ENOSPC; + } + irq_set_msi_desc(irq, desc); msg.address_hi = 0x0; @@ -191,3 +158,8 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) return 0; } + +void arch_teardown_msi_irq(unsigned int irq) +{ + irq_free_desc(irq); +} diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 96e6c7a6793b..bca96f433495 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -27,6 +27,7 @@ #include <mach/hardware.h> #include <asm/irq.h> #include <asm/hardware/iop_adma.h> +#include <mach/irqs.h> #define IOP13XX_UART_XTAL 33334000 #define IOP13XX_SETUP_DEBUG 0 diff --git a/arch/arm/mach-iop13xx/tpmi.c b/arch/arm/mach-iop13xx/tpmi.c index 6fdad7a0425a..db511ec2b1df 100644 --- a/arch/arm/mach-iop13xx/tpmi.c +++ b/arch/arm/mach-iop13xx/tpmi.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <asm/irq.h> #include <asm/sizes.h> +#include <mach/irqs.h> /* assumes CONTROLLER_ONLY# is never asserted in the ESSR register */ #define IOP13XX_TPMI_MMR(dev) IOP13XX_REG_ADDR32_PHYS(0x48000 + (dev << 12)) diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2801da49e2a3..ff18ff20f71f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -195,7 +195,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 2a97a2e4163c..2c47a8ad0e27 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include <asm/exception.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> @@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init kirkwood_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(kirkwood_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-49. */ diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 34932e0e31fa..7858d5b6f6ce 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -202,9 +202,6 @@ static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, .ios_handler = mmc_handle_ios, - .dma_filter = NULL, - /* No DMA for now since AMBA PL080 dmaengine driver only does scatter - * gather, and the MMCI driver doesn't do it this way */ }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index a7f959e58c3d..9b26976fb084 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -42,9 +42,6 @@ config ARCH_QSD8X50 endchoice -config MSM_HAS_DEBUG_UART_HS - bool - config MSM_SOC_REV_A bool diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index b621b23a5ecc..245884319d2e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -94,7 +94,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 9169ec324a43..4c748616ef47 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -116,7 +116,7 @@ static int hsusb_phy_clk_reset(struct clk *phy_clk) static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, - .mode = USB_PERIPHERAL, + .mode = USB_DR_MODE_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, .link_clk_reset = hsusb_link_clk_reset, .phy_clk_reset = hsusb_phy_clk_reset, diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c index 87e1d01edecc..2c25050209ce 100644 --- a/arch/arm/mach-msm/board-trout-gpio.c +++ b/arch/arm/mach-msm/board-trout-gpio.c @@ -89,7 +89,7 @@ static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset) .base = base_gpio, \ .ngpio = 8, \ }, \ - .reg = (void *) reg_num + TROUT_CPLD_BASE, \ + .reg = reg_num + TROUT_CPLD_BASE, \ .shadow = shadow_val, \ } diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 58826cfab6b0..f72b07de2152 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -76,7 +76,7 @@ static void __init trout_init(void) static struct map_desc trout_io_desc[] __initdata = { { - .virtual = TROUT_CPLD_BASE, + .virtual = (unsigned long)TROUT_CPLD_BASE, .pfn = __phys_to_pfn(TROUT_CPLD_START), .length = TROUT_CPLD_SIZE, .type = MT_DEVICE_NONSHARED diff --git a/arch/arm/mach-msm/board-trout.h b/arch/arm/mach-msm/board-trout.h index b2379ede43bc..adb757abbb92 100644 --- a/arch/arm/mach-msm/board-trout.h +++ b/arch/arm/mach-msm/board-trout.h @@ -58,7 +58,7 @@ #define TROUT_4_TP_LS_EN 19 #define TROUT_5_TP_LS_EN 1 -#define TROUT_CPLD_BASE 0xE8100000 +#define TROUT_CPLD_BASE IOMEM(0xE8100000) #define TROUT_CPLD_START 0x98000000 #define TROUT_CPLD_SIZE SZ_4K diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3f73eecbcfb0..6090b9eb00c8 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -3,15 +3,13 @@ config ARCH_MVEBU select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select IRQ_DOMAIN select PINCTRL select PLAT_ORION + select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB - select MIGHT_HAVE_PCI select PCI_QUIRKS if PCI - select OF_ADDRESS_PCI if ARCH_MVEBU @@ -38,7 +36,9 @@ config MACH_ARMADA_375 select ARM_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -51,7 +51,9 @@ config MACH_ARMADA_38X select ARM_ERRATA_753970 select ARM_GIC select ARMADA_38X_CLK - select CPU_V7 + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -86,24 +88,15 @@ config MACH_KIRKWOOD select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select KIRKWOOD_CLK - select OF_IRQ select ORION_IRQCHIP select ORION_TIMER select PCI select PCI_QUIRKS select PINCTRL_KIRKWOOD - select USE_OF help Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_T5325 - bool "HP T5325 thin client" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - HP T5325 Thin client - endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index a63e43b6b451..2ecb828e4a8b 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -2,12 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a +CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o -obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o + +ifeq ($(CONFIG_MACH_MVEBU_V7),y) +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif + obj-$(CONFIG_MACH_DOVE) += dove.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 237c86b83390..c3465f5b1250 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -20,8 +20,6 @@ #define ARMADA_XP_MAX_CPUS 4 -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq); -void armada_xp_mpic_smp_cpu_init(void); void armada_xp_secondary_startup(void); extern struct smp_operations armada_xp_smp_ops; #endif diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c deleted file mode 100644 index 65ace6db9f28..000000000000 --- a/arch/arm/mach-mvebu/board-t5325.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * HP T5325 Board Setup - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <sound/alc5623.h> -#include "board.h" - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -void __init t5325_init(void) -{ - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - platform_device_register(&hp_t5325_audio_device); -} diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 48169caa56ea..594262b27f56 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -27,12 +27,30 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/smp_scu.h> #include "armada-370-xp.h" #include "common.h" #include "coherency.h" #include "mvebu-soc-id.h" /* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + void __iomem *scu_base; + + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +/* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this * data abort as soon as it enters userspace, because it unmasks the @@ -57,8 +75,10 @@ static void __init mvebu_timer_and_clk_init(void) { of_clk_init(NULL); clocksource_of_init(); + mvebu_scu_enable(); coherency_init(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(coherency_available())); + l2x0_of_init(0, ~0UL); if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -75,7 +95,7 @@ static void __init i2c_quirk(void) * mechanism. We can exit only if we are sure that we can * get the SoC revision and it is more recent than A0. */ - if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV) + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) return; for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { @@ -93,10 +113,66 @@ static void __init i2c_quirk(void) return; } +#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc + +static void __init thermal_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { + struct property *prop; + __be32 newval, *newprop, *oldprop; + int len; + + /* + * The register offset is at a wrong location. This quirk + * creates a new reg property as a clone of the previous + * one and corrects the offset. + */ + oldprop = (__be32 *)of_get_property(np, "reg", &len); + if (!oldprop) + continue; + + /* Create a duplicate of the 'reg' property */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->length = len; + prop->name = kstrdup("reg", GFP_KERNEL); + prop->value = kzalloc(len, GFP_KERNEL); + memcpy(prop->value, oldprop, len); + + /* Fixup the register offset of the second entry */ + oldprop += 2; + newprop = (__be32 *)prop->value + 2; + newval = cpu_to_be32(be32_to_cpu(*oldprop) - + A375_Z1_THERMAL_FIXUP_OFFSET); + *newprop = newval; + of_update_property(np, prop); + + /* + * The thermal controller needs some quirk too, so let's change + * the compatible string to reflect this. + */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->name = kstrdup("compatible", GFP_KERNEL); + prop->length = sizeof("marvell,armada375-z1-thermal"); + prop->value = kstrdup("marvell,armada375-z1-thermal", + GFP_KERNEL); + of_update_property(np, prop); + } + return; +} + static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); + if (of_machine_is_compatible("marvell,a375-db")) + thermal_quirk(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -124,6 +200,7 @@ DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, .init_time = mvebu_timer_and_clk_init, + .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h index de7f0a191394..9c7bb4386f8b 100644 --- a/arch/arm/mach-mvebu/board.h +++ b/arch/arm/mach-mvebu/board.h @@ -13,10 +13,4 @@ #ifndef __ARCH_MVEBU_BOARD_H #define __ARCH_MVEBU_BOARD_H -#ifdef CONFIG_MACH_T5325 -void t5325_init(void); -#else -static inline void t5325_init(void) {}; -#endif - #endif diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4e9d58148ca7..477202fd39cc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -17,6 +17,8 @@ * supplies basic routines for configuring and controlling hardware coherency */ +#define pr_fmt(fmt) "mvebu-coherency: " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> @@ -24,13 +26,19 @@ #include <linux/smp.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mbus.h> +#include <linux/clk.h> +#include <linux/pci.h> #include <asm/smp_plat.h> #include <asm/cacheflush.h> +#include <asm/mach/map.h> #include "armada-370-xp.h" #include "coherency.h" +#include "mvebu-soc-id.h" unsigned long coherency_phys_base; -static void __iomem *coherency_base; +void __iomem *coherency_base; static void __iomem *coherency_cpu_base; /* Coherency fabric registers */ @@ -38,27 +46,190 @@ static void __iomem *coherency_cpu_base; #define IO_SYNC_BARRIER_CTL_OFFSET 0x0 +enum { + COHERENCY_FABRIC_TYPE_NONE, + COHERENCY_FABRIC_TYPE_ARMADA_370_XP, + COHERENCY_FABRIC_TYPE_ARMADA_375, + COHERENCY_FABRIC_TYPE_ARMADA_380, +}; + static struct of_device_id of_coherency_table[] = { - {.compatible = "marvell,coherency-fabric"}, + {.compatible = "marvell,coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, + {.compatible = "marvell,armada-375-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 }, + {.compatible = "marvell,armada-380-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 }, { /* end of list */ }, }; -/* Function defined in coherency_ll.S */ -int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); +/* Functions defined in coherency_ll.S */ +int ll_enable_coherency(void); +void ll_add_cpu_to_smp_group(void); -int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id) +int set_cpu_coherent(void) { if (!coherency_base) { - pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id); + pr_warn("Can't make current CPU cache coherent.\n"); pr_warn("Coherency fabric is not initialized\n"); return 1; } - return ll_set_cpu_coherent(coherency_base, hw_cpu_id); + ll_add_cpu_to_smp_group(); + return ll_enable_coherency(); +} + +/* + * The below code implements the I/O coherency workaround on Armada + * 375. This workaround consists in using the two channels of the + * first XOR engine to trigger a XOR transaction that serves as the + * I/O coherency barrier. + */ + +static void __iomem *xor_base, *xor_high_base; +static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS]; +static void *coherency_wa_buf[CONFIG_NR_CPUS]; +static bool coherency_wa_enabled; + +#define XOR_CONFIG(chan) (0x10 + (chan * 4)) +#define XOR_ACTIVATION(chan) (0x20 + (chan * 4)) +#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2)) +#define WINDOW_BASE(w) (0x250 + ((w) << 2)) +#define WINDOW_SIZE(w) (0x270 + ((w) << 2)) +#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2)) +#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2)) +#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4)) +#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4)) +#define XOR_INIT_VALUE_LOW 0x2E0 +#define XOR_INIT_VALUE_HIGH 0x2E4 + +static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void) +{ + int idx = smp_processor_id(); + + /* Write '1' to the first word of the buffer */ + writel(0x1, coherency_wa_buf[idx]); + + /* Wait until the engine is idle */ + while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3) + ; + + dmb(); + + /* Trigger channel */ + writel(0x1, xor_base + XOR_ACTIVATION(idx)); + + /* Poll the data until it is cleared by the XOR transaction */ + while (readl(coherency_wa_buf[idx])) + ; +} + +static void __init armada_375_coherency_init_wa(void) +{ + const struct mbus_dram_target_info *dram; + struct device_node *xor_node; + struct property *xor_status; + struct clk *xor_clk; + u32 win_enable = 0; + int i; + + pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n"); + + /* + * Since the workaround uses one XOR engine, we grab a + * reference to its Device Tree node first. + */ + xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor"); + BUG_ON(!xor_node); + + /* + * Then we mark it as disabled so that the real XOR driver + * will not use it. + */ + xor_status = kzalloc(sizeof(struct property), GFP_KERNEL); + BUG_ON(!xor_status); + + xor_status->value = kstrdup("disabled", GFP_KERNEL); + BUG_ON(!xor_status->value); + + xor_status->length = 8; + xor_status->name = kstrdup("status", GFP_KERNEL); + BUG_ON(!xor_status->name); + + of_update_property(xor_node, xor_status); + + /* + * And we remap the registers, get the clock, and do the + * initial configuration of the XOR engine. + */ + xor_base = of_iomap(xor_node, 0); + xor_high_base = of_iomap(xor_node, 1); + + xor_clk = of_clk_get_by_name(xor_node, NULL); + BUG_ON(!xor_clk); + + clk_prepare_enable(xor_clk); + + dram = mv_mbus_dram_info(); + + for (i = 0; i < 8; i++) { + writel(0, xor_base + WINDOW_BASE(i)); + writel(0, xor_base + WINDOW_SIZE(i)); + if (i < 4) + writel(0, xor_base + WINDOW_REMAP_HIGH(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel((cs->base & 0xffff0000) | + (cs->mbus_attr << 8) | + dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i)); + writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i)); + + win_enable |= (1 << i); + win_enable |= 3 << (16 + (2 * i)); + } + + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0)); + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1)); + + for (i = 0; i < CONFIG_NR_CPUS; i++) { + coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL); + BUG_ON(!coherency_wa_buf[i]); + + /* + * We can't use the DMA mapping API, since we don't + * have a valid 'struct device' pointer + */ + coherency_wa_buf_phys[i] = + virt_to_phys(coherency_wa_buf[i]); + BUG_ON(!coherency_wa_buf_phys[i]); + + /* + * Configure the XOR engine for memset operation, with + * a 128 bytes block size + */ + writel(0x444, xor_base + XOR_CONFIG(i)); + writel(128, xor_base + XOR_BLOCK_SIZE(i)); + writel(coherency_wa_buf_phys[i], + xor_base + XOR_DEST_POINTER(i)); + } + + writel(0x0, xor_base + XOR_INIT_VALUE_LOW); + writel(0x0, xor_base + XOR_INIT_VALUE_HIGH); + + coherency_wa_enabled = true; } static inline void mvebu_hwcc_sync_io_barrier(void) { + if (coherency_wa_enabled) { + mvebu_hwcc_armada375_sync_io_barrier_wa(); + return; + } + writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); } @@ -105,8 +276,8 @@ static struct dma_map_ops mvebu_hwcc_dma_ops = { .set_dma_mask = arm_dma_set_mask, }; -static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) +static int mvebu_hwcc_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) { struct device *dev = __dev; @@ -117,47 +288,148 @@ static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, return NOTIFY_OK; } -static struct notifier_block mvebu_hwcc_platform_nb = { - .notifier_call = mvebu_hwcc_platform_notifier, +static struct notifier_block mvebu_hwcc_nb = { + .notifier_call = mvebu_hwcc_notifier, }; -int __init coherency_init(void) +static void __init armada_370_coherency_init(struct device_node *np) +{ + struct resource res; + + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); + coherency_base = of_iomap(np, 0); + coherency_cpu_base = of_iomap(np, 1); + set_cpu_coherent(); +} + +/* + * This ioremap hook is used on Armada 375/38x to ensure that PCIe + * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This + * is needed as a workaround for a deadlock issue between the PCIe + * interface and the cache controller. + */ +static void __iomem * +armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) +{ + struct resource pcie_mem; + + mvebu_mbus_get_pcie_mem_aperture(&pcie_mem); + + if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end) + mtype = MT_UNCACHED; + + return __arm_ioremap_caller(phys_addr, size, mtype, caller); +} + +static void __init armada_375_380_coherency_init(struct device_node *np) +{ + struct device_node *cache_dn; + + coherency_cpu_base = of_iomap(np, 0); + arch_ioremap_caller = armada_pcie_wa_ioremap_caller; + + /* + * Add the PL310 property "arm,io-coherent". This makes sure the + * outer sync operation is not used, which allows to + * workaround the system erratum that causes deadlocks when + * doing PCIe in an SMP situation on Armada 375 and Armada + * 38x. + */ + for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") { + struct property *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + p->name = kstrdup("arm,io-coherent", GFP_KERNEL); + of_add_property(cache_dn, p); + } +} + +static int coherency_type(void) { struct device_node *np; + const struct of_device_id *match; - np = of_find_matching_node(NULL, of_coherency_table); + np = of_find_matching_node_and_match(NULL, of_coherency_table, &match); if (np) { - struct resource res; - pr_info("Initializing Coherency fabric\n"); - of_address_to_resource(np, 0, &res); - coherency_phys_base = res.start; - /* - * Ensure secondary CPUs will see the updated value, - * which they read before they join the coherency - * fabric, and therefore before they are coherent with - * the boot CPU cache. - */ - sync_cache_w(&coherency_phys_base); - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - of_node_put(np); + int type = (int) match->data; + + /* Armada 370/XP coherency works in both UP and SMP */ + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + return type; + + /* Armada 375 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp()) + return type; + + /* Armada 380 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp()) + return type; } - return 0; + return COHERENCY_FABRIC_TYPE_NONE; } -static int __init coherency_late_init(void) +int coherency_available(void) +{ + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; +} + +int __init coherency_init(void) { + int type = coherency_type(); struct device_node *np; np = of_find_matching_node(NULL, of_coherency_table); - if (np) { - bus_register_notifier(&platform_bus_type, - &mvebu_hwcc_platform_nb); - of_node_put(np); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + armada_370_coherency_init(np); + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 || + type == COHERENCY_FABRIC_TYPE_ARMADA_380) + armada_375_380_coherency_init(np); + + return 0; +} + +static int __init coherency_late_init(void) +{ + int type = coherency_type(); + + if (type == COHERENCY_FABRIC_TYPE_NONE) + return 0; + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_coherency_init_wa(); } + + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_nb); + return 0; } postcore_initcall(coherency_late_init); + +#if IS_ENABLED(CONFIG_PCI) +static int __init coherency_pci_init(void) +{ + if (coherency_available()) + bus_register_notifier(&pci_bus_type, + &mvebu_hwcc_nb); + return 0; +} + +arch_initcall(coherency_pci_init); +#endif diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 760226c41353..54cb7607b526 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -15,8 +15,9 @@ #define __MACH_370_XP_COHERENCY_H extern unsigned long coherency_phys_base; +int set_cpu_coherent(void); -int set_cpu_coherent(unsigned int cpu_id, int smp_group_id); int coherency_init(void); +int coherency_available(void); #endif /* __MACH_370_XP_COHERENCY_H */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index ee7598fe75db..510c29e079ca 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -21,38 +21,129 @@ #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 #include <asm/assembler.h> +#include <asm/cp15.h> .text +/* Returns the coherency base address in r1 (r0 is untouched) */ +ENTRY(ll_get_coherency_base) + mrc p15, 0, r1, c1, c0, 0 + tst r1, #CR_M @ Check MMU bit enabled + bne 1f + + /* + * MMU is disabled, use the physical address of the coherency + * base address. + */ + adr r1, 3f + ldr r3, [r1] + ldr r1, [r1, r3] + b 2f +1: + /* + * MMU is enabled, use the virtual address of the coherency + * base address. + */ + ldr r1, =coherency_base + ldr r1, [r1] +2: + mov pc, lr +ENDPROC(ll_get_coherency_base) + /* - * r0: Coherency fabric base register address - * r1: HW CPU id + * Returns the coherency CPU mask in r3 (r0 is untouched). This + * coherency CPU mask can be used with the coherency fabric + * configuration and control registers. Note that the mask is already + * endian-swapped as appropriate so that the calling functions do not + * have to care about endianness issues while accessing the coherency + * fabric registers */ -ENTRY(ll_set_cpu_coherent) - /* Create bit by cpu index */ - mov r3, #(1 << 24) - lsl r1, r3, r1 -ARM_BE8(rev r1, r1) - - /* Add CPU to SMP group - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET -1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b - - /* Enable coherency on CPU - Atomic */ - add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +ENTRY(ll_get_coherency_cpumask) + mrc 15, 0, r3, cr0, cr0, 5 + and r3, r3, #15 + mov r2, #(1 << 24) + lsl r3, r2, r3 +ARM_BE8(rev r3, r3) + mov pc, lr +ENDPROC(ll_get_coherency_cpumask) + +/* + * ll_add_cpu_to_smp_group(), ll_enable_coherency() and + * ll_disable_coherency() use the strex/ldrex instructions while the + * MMU can be disabled. The Armada XP SoC has an exclusive monitor + * that tracks transactions to Device and/or SO memory and thanks to + * that, exclusive transactions are functional even when the MMU is + * disabled. + */ + +ENTRY(ll_add_cpu_to_smp_group) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET 1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + mov pc, lr +ENDPROC(ll_add_cpu_to_smp_group) +ENTRY(ll_enable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b dsb - mov r0, #0 mov pc, lr -ENDPROC(ll_set_cpu_coherent) +ENDPROC(ll_enable_coherency) + +ENTRY(ll_disable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + bic r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + mov pc, lr +ENDPROC(ll_disable_coherency) + + .align 2 +3: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index 55449c487c9e..b67fb7a10d8b 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -18,6 +18,9 @@ #include <linux/reboot.h> void mvebu_restart(enum reboot_mode mode, const char *cmd); +int mvebu_cpu_reset_deassert(int cpu); +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); void armada_xp_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c new file mode 100644 index 000000000000..4a8f9eebebea --- /dev/null +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-cpureset: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/resource.h> +#include "armada-370-xp.h" + +static void __iomem *cpu_reset_base; +static size_t cpu_reset_size; + +#define CPU_RESET_OFFSET(cpu) (cpu * 0x8) +#define CPU_RESET_ASSERT BIT(0) + +int mvebu_cpu_reset_deassert(int cpu) +{ + u32 reg; + + if (!cpu_reset_base) + return -ENODEV; + + if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size) + return -EINVAL; + + reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu)); + reg &= ~CPU_RESET_ASSERT; + writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu)); + + return 0; +} + +static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) +{ + struct resource res; + + if (of_address_to_resource(np, res_idx, &res)) { + pr_err("unable to get resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + return -EBUSY; + } + + cpu_reset_base = ioremap(res.start, resource_size(&res)); + if (!cpu_reset_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + return -ENOMEM; + } + + cpu_reset_size = resource_size(&res); + + return 0; +} + +int __init mvebu_cpu_reset_init(void) +{ + struct device_node *np; + int res_idx; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-cpu-reset"); + if (np) { + res_idx = 0; + } else { + /* + * This code is kept for backward compatibility with + * old Device Trees. + */ + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-xp-pmsu"); + if (np) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res_idx = 1; + } + } + + /* No reset node found */ + if (!np) + return -ENODEV; + + ret = mvebu_cpu_reset_map(np, res_idx); + of_node_put(np); + + return ret; +} + +early_initcall(mvebu_cpu_reset_init); diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 5e5a43624237..b50464ec1130 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -23,7 +23,7 @@ static void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000000..5925366bc03c --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,34 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT +#define CPU_RESUME_ADDR_REG 0xf10182d4 + +.global armada_375_smp_cpu1_enable_code_start +.global armada_375_smp_cpu1_enable_code_end + +armada_375_smp_cpu1_enable_code_start: + ldr r0, [pc, #4] + ldr r1, [r0] + mov pc, r1 + .word CPU_RESUME_ADDR_REG +armada_375_smp_cpu1_enable_code_end: + +ENTRY(mvebu_cortex_a9_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 3dd80df428f7..2c4032e368ba 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -31,21 +31,10 @@ ENTRY(armada_xp_secondary_startup) ARM_BE8(setend be ) @ go BE8 if entered LE - /* Get coherency fabric base physical address */ - adr r0, 1f - ldr r1, [r0] - ldr r0, [r0, r1] + bl ll_add_cpu_to_smp_group - /* Read CPU id */ - mrc p15, 0, r1, c0, c0, 5 - and r1, r1, #0xF + bl ll_enable_coherency - /* Add CPU to coherency fabric */ - bl ll_set_cpu_coherent b secondary_startup ENDPROC(armada_xp_secondary_startup) - - .align 2 -1: - .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 120207fc36f1..46f105913c84 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -169,7 +169,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); @@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("hp,t5325")) - t5325_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index f3d4cf53f746..d0f35b4d4a23 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -23,6 +23,8 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "mvebu-soc-id.h" #define PCIE_DEV_ID_OFF 0x0 @@ -108,7 +110,18 @@ static int __init mvebu_soc_id_init(void) iounmap(pci_base); res_ioremap: - clk_disable_unprepare(clk); + /* + * If the PCIe unit is actually enabled and we have PCI + * support in the kernel, we intentionally do not release the + * reference to the clock. We want to keep it running since + * the bootloader does some PCIe link configuration that the + * kernel is for now unable to do, and gating the clock would + * make us loose this precious configuration. + */ + if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) { + clk_disable_unprepare(clk); + clk_put(clk); + } clk_err: of_node_put(child); @@ -116,5 +129,33 @@ clk_err: return ret; } -core_initcall(mvebu_soc_id_init); +early_initcall(mvebu_soc_id_init); + +static int __init mvebu_soc_device(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + /* Also protects against running on non-mvebu systems */ + if (!is_id_valid) + return 0; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id); + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + + return 0; +} +postcore_initcall(mvebu_soc_device); diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h index 31654252fe35..c16bb68ca81f 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.h +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -20,6 +20,10 @@ #define MV78XX0_A0_REV 0x1 #define MV78XX0_B0_REV 0x2 +/* Armada 375 */ +#define ARMADA_375_Z1_REV 0x0 +#define ARMADA_375_A0_REV 0x3 + #ifdef CONFIG_ARCH_MVEBU int mvebu_get_soc_id(u32 *dev, u32 *rev); #else diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c new file mode 100644 index 000000000000..96c2c59e34b6 --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -0,0 +1,102 @@ +/* + * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9 + * based SOCs (Armada 375/38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/mbus.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define CRYPT0_ENG_ID 41 +#define CRYPT0_ENG_ATTR 0x1 +#define SRAM_PHYS_BASE 0xFFFF0000 + +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +extern unsigned char armada_375_smp_cpu1_enable_code_end; +extern unsigned char armada_375_smp_cpu1_enable_code_start; + +void armada_375_smp_cpu1_enable_wa(void) +{ + void __iomem *sram_virt_base; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR, + SRAM_PHYS_BASE, SZ_64K); + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + + memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start, + &armada_375_smp_cpu1_enable_code_end + - &armada_375_smp_cpu1_enable_code_start); +} + +extern void mvebu_cortex_a9_secondary_startup(void); + +static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + /* + * Write the address of secondary startup into the system-wide + * flags register. The boot monitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this + * address. + */ + hw_cpu = cpu_logical_map(cpu); + + if (of_machine_is_compatible("marvell,armada375")) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_smp_cpu1_enable_wa(); + + mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); + } + else { + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, + mvebu_cortex_a9_secondary_startup); + } + + smp_wmb(); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_err("Could not start the secondary CPU: %d\n", ret); + return ret; + } + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", + &mvebu_cortex_a9_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", + &mvebu_cortex_a9_smp_ops); diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index a6da03f5b24e..88b976b31719 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void) } } -static void armada_xp_secondary_init(unsigned int cpu) -{ - armada_xp_mpic_smp_cpu_init(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret, hw_cpu; + pr_info("Booting CPU %d\n", cpu); - armada_xp_boot_cpu(cpu, armada_xp_secondary_startup); + hw_cpu = cpu_logical_map(cpu); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } return 0; } @@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void) if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) panic("Invalid number of CPUs in DT\n"); - - set_smp_cross_call(armada_mpic_send_doorbell); } static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) @@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) set_secondary_cpus_clock(); flush_cache_all(); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + set_cpu_coherent(); /* * In order to boot the secondary CPUs we need to ensure @@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations armada_xp_smp_ops __initdata = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, - .smp_secondary_init = armada_xp_secondary_init, .smp_boot_secondary = armada_xp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = armada_xp_cpu_die, #endif }; + +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", + &armada_xp_smp_ops); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index d71ef53107c4..53a55c8520bf 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -16,62 +16,283 @@ * other SOC units */ +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/smp.h> +#include <linux/resource.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> -#include "pmsu.h" +#include <asm/suspend.h> +#include <asm/tlbflush.h> +#include "common.h" static void __iomem *pmsu_mp_base; -static void __iomem *pmsu_reset_base; -#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24) -#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8) +#define PMSU_BASE_OFFSET 0x100 +#define PMSU_REG_SIZE 0x1000 + +/* PMSU MP registers */ +#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104) +#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18) +#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16) +#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20) + +#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108) + +#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0) + +#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c) +#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16) +#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17) +#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20) +#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21) +#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22) +#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) +#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) + +#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) + +/* PMSU fabric registers */ +#define L2C_NFABRIC_PM_CTL 0x4 +#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) + +extern void ll_disable_coherency(void); +extern void ll_enable_coherency(void); + +static struct platform_device armada_xp_cpuidle_device = { + .name = "cpuidle-armada-370-xp", +}; static struct of_device_id of_pmsu_table[] = { - {.compatible = "marvell,armada-370-xp-pmsu"}, + { .compatible = "marvell,armada-370-pmsu", }, + { .compatible = "marvell,armada-370-xp-pmsu", }, + { .compatible = "marvell,armada-380-pmsu", }, { /* end of list */ }, }; -#ifdef CONFIG_SMP -int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr) +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) { - int reg, hw_cpu; + writel(virt_to_phys(boot_addr), pmsu_mp_base + + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); +} + +static int __init armada_370_xp_pmsu_init(void) +{ + struct device_node *np; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + + pr_info("Initializing Power Management Service Unit\n"); - if (!pmsu_mp_base || !pmsu_reset_base) { - pr_warn("Can't boot CPU. PMSU is uninitialized\n"); - return 1; + if (of_address_to_resource(np, 0, &res)) { + pr_err("unable to get resource\n"); + ret = -ENOENT; + goto out; } - hw_cpu = cpu_logical_map(cpu_id); + if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res.start = res.start - PMSU_BASE_OFFSET; + res.end = res.start + PMSU_REG_SIZE - 1; + } - writel(virt_to_phys(boot_addr), pmsu_mp_base + - PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + ret = -EBUSY; + goto out; + } + + pmsu_mp_base = ioremap(res.start, resource_size(&res)); + if (!pmsu_mp_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + ret = -ENOMEM; + goto out; + } + + out: + of_node_put(np); + return ret; +} + +static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) +{ + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */ + reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL); + reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN; + writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); +} + +static void armada_370_xp_cpu_resume(void) +{ + asm volatile("bl ll_add_cpu_to_smp_group\n\t" + "bl ll_enable_coherency\n\t" + "b cpu_resume\n\t"); +} + +/* No locking is needed because we only access per-CPU registers */ +void armada_370_xp_pmsu_idle_prepare(bool deepidle) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; - /* Release CPU from reset by clearing reset bit*/ - reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); - reg &= (~0x1); - writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); + /* + * Adjust the PMSU configuration to wait for WFI signal, enable + * IRQ and FIQ as wakeup events, set wait for snoop queue empty + * indication and mask IRQ and FIQ from CPU + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_WAKEUP | + PMSU_STATUS_AND_MASK_FIQ_WAKEUP | + PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + /* ask HW to power down the L2 Cache if needed */ + if (deepidle) + reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + + /* request power down */ + reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); +} + +static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + armada_370_xp_pmsu_idle_prepare(deepidle); + + v7_exit_coherency_flush(all); + + ll_disable_coherency(); + + dsb(); + + wfi(); + + /* If we are here, wfi failed. As processors run out of + * coherency for some time, tlbs might be stale, so flush them + */ + local_flush_tlb_all(); + + ll_enable_coherency(); + + /* Test the CR_C bit and set it if it was cleared */ + asm volatile( + "mrc p15, 0, %0, c1, c0, 0 \n\t" + "tst %0, #(1 << 2) \n\t" + "orreq %0, %0, #(1 << 2) \n\t" + "mcreq p15, 0, %0, c1, c0, 0 \n\t" + "isb " + : : "r" (0)); + + pr_warn("Failed to suspend the system\n"); return 0; } -#endif -static int __init armada_370_xp_pmsu_init(void) +static int armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend); +} + +/* No locking is needed because we only access per-CPU registers */ +static noinline void armada_370_xp_pmsu_idle_restore(void) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* cancel ask HW to power down the L2 Cache if possible */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* cancel Enable wakeup events and mask interrupts */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT; + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK); + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); +} + +static int armada_370_xp_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) { + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume); + } else if (action == CPU_PM_EXIT) { + armada_370_xp_pmsu_idle_restore(); + } + + return NOTIFY_OK; +} + +static struct notifier_block armada_370_xp_cpu_pm_notifier = { + .notifier_call = armada_370_xp_cpu_pm_notify, +}; + +int __init armada_370_xp_cpu_pm_init(void) { struct device_node *np; + /* + * Check that all the requirements are available to enable + * cpuidle. So far, it is only supported on Armada XP, cpuidle + * needs the coherency fabric and the PMSU enabled + */ + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return 0; + of_node_put(np); + np = of_find_matching_node(NULL, of_pmsu_table); - if (np) { - pr_info("Initializing Power Management Service Unit\n"); - pmsu_mp_base = of_iomap(np, 0); - pmsu_reset_base = of_iomap(np, 1); - of_node_put(np); - } + if (!np) + return 0; + of_node_put(np); + + armada_370_xp_pmsu_enable_l2_powerdown_onidle(); + armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + platform_device_register(&armada_xp_cpuidle_device); + cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier); return 0; } +arch_initcall(armada_370_xp_cpu_pm_init); early_initcall(armada_370_xp_pmsu_init); diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 614ba6832ff3..0c5524ac75b7 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -37,6 +37,8 @@ struct mvebu_system_controller { u32 rstoutn_mask_reset_out_en; u32 system_soft_reset; + + u32 resume_boot_addr; }; static struct mvebu_system_controller *mvebu_sc; @@ -52,6 +54,7 @@ static const struct mvebu_system_controller armada_375_system_controller = { .system_soft_reset_offset = 0x58, .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, + .resume_boot_addr = 0xd4, }; static const struct mvebu_system_controller orion_system_controller = { @@ -98,6 +101,16 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) ; } +#ifdef CONFIG_SMP +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) +{ + BUG_ON(system_controller_base == NULL); + BUG_ON(mvebu_sc->resume_boot_addr == 0); + writel(virt_to_phys(boot_addr), system_controller_base + + mvebu_sc->resume_boot_addr); +} +#endif + static int __init mvebu_system_controller_init(void) { const struct of_device_id *match; @@ -114,4 +127,4 @@ static int __init mvebu_system_controller_init(void) return 0; } -arch_initcall(mvebu_system_controller_init); +early_initcall(mvebu_system_controller_init); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 65d2acb31498..5b45d266d83e 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -346,7 +346,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 816ecd13f81e..bfed4f928663 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -366,7 +366,7 @@ static struct omap_usb_config h3_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */ diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index bd5f02e9c354..c49ce83cc1eb 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -312,7 +312,7 @@ static struct omap_usb_config h2_usb_config __initdata = { /* usb1 has a Mini-AB port and external isp1301 transceiver */ .otg = 2, -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .hmc_mode = 19, /* 0:host(off) 1:dev|otg 2:disabled */ /* .hmc_mode = 21,*/ /* 0:host(off) 1:dev(loopback) 2:host(loopback) */ #elif defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 3a0262156e93..7436d4cf6596 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -283,7 +283,7 @@ static struct omap_usb_config osk_usb_config __initdata = { * be used, with a NONSTANDARD gender-bending cable/dongle, as * a peripheral. */ -#ifdef CONFIG_USB_GADGET_OMAP +#if IS_ENABLED(CONFIG_USB_OMAP) .register_dev = 1, .hmc_mode = 0, #else diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0a8d3349149c..29e526235dc2 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -266,31 +266,6 @@ static struct physmap_flash_data sx1_flash_data = { .nr_parts = ARRAY_SIZE(sx1_partitions), }; -#ifdef CONFIG_SX1_OLD_FLASH -/* MTD Intel StrataFlash - old flashes */ -static struct resource sx1_old_flash_resource[] = { - [0] = { - .start = OMAP_CS0_PHYS, /* Physical */ - .end = OMAP_CS0_PHYS + SZ_16M - 1,, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_CS1_PHYS, - .end = OMAP_CS1_PHYS + SZ_8M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device sx1_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &sx1_flash_data, - }, - .num_resources = 2, - .resource = &sx1_old_flash_resource, -}; -#else /* MTD Intel 4000 flash - new flashes */ static struct resource sx1_new_flash_resource = { .start = OMAP_CS0_PHYS, @@ -307,7 +282,6 @@ static struct platform_device sx1_flash_device = { .num_resources = 1, .resource = &sx1_new_flash_resource, }; -#endif /*----------- USB -------------------------*/ diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index dbee729e3b6d..34b4c0044961 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -123,19 +123,8 @@ void omap1_pm_idle(void) #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); #else - - while (enable_dyn_sleep) { - -#ifdef CONFIG_CBUS_TAHVO_USB - extern int vbus_active; - /* Clock requirements? */ - if (vbus_active) - break; -#endif + if (enable_dyn_sleep) do_sleep = 1; - break; - } - #endif #ifdef CONFIG_OMAP_DM_TIMER diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 543d9a882de3..4f9383cecf76 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -262,12 +262,7 @@ static struct usbhs_phy_data phy_data[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ - defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, -#else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -#endif }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index ac82512b9c8c..e87f2a83d6bf 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, board_nand_data.nr_parts = nr_parts; board_nand_data.devsize = nand_type; - board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW; gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -160,13 +160,13 @@ static u8 get_gpmc0_type(void) if (!fpga_map_addr) return -ENOMEM; - if (!(__raw_readw(fpga_map_addr + REG_FPGA_REV))) + if (!(readw_relaxed(fpga_map_addr + REG_FPGA_REV))) /* we dont have an DEBUG FPGA??? */ /* Depend on #defines!! default to strata boot return param */ goto unmap; /* S8-DIP-OFF = 1, S8-DIP-ON = 0 */ - cs = __raw_readw(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; + cs = readw_relaxed(fpga_map_addr + REG_FPGA_DIP_SWITCH_INPUT2) & 0xf; /* ES2.0 SDP's onwards 4 dip switches are provided for CS */ if (omap_rev() >= OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index b8920b6bc104..9480997ba616 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -43,7 +43,7 @@ static void __init omap_generic_init(void) } #ifdef CONFIG_SOC_OMAP2420 -static const char *omap242x_boards_compat[] __initdata = { +static const char *omap242x_boards_compat[] __initconst = { "ti,omap2420", NULL, }; @@ -62,7 +62,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP2430 -static const char *omap243x_boards_compat[] __initdata = { +static const char *omap243x_boards_compat[] __initconst = { "ti,omap2430", NULL, }; @@ -81,7 +81,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 -static const char *omap3_boards_compat[] __initdata = { +static const char *omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", NULL, @@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap36xx_boards_compat[] __initdata = { +static const char *omap36xx_boards_compat[] __initconst = { "ti,omap36xx", NULL, }; @@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *omap3_gp_boards_compat[] __initdata = { +static const char *omap3_gp_boards_compat[] __initconst = { "ti,omap3-beagle", "timll,omap3-devkit8000", NULL, @@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END -static const char *am3517_boards_compat[] __initdata = { +static const char *am3517_boards_compat[] __initconst = { "ti,am3517", NULL, }; @@ -157,7 +157,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM33XX -static const char *am33xx_boards_compat[] __initdata = { +static const char *am33xx_boards_compat[] __initconst = { "ti,am33xx", NULL, }; @@ -177,7 +177,7 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP4 -static const char *omap4_boards_compat[] __initdata = { +static const char *omap4_boards_compat[] __initconst = { "ti,omap4460", "ti,omap4430", "ti,omap4", @@ -199,7 +199,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_OMAP5 -static const char *omap5_boards_compat[] __initdata = { +static const char *omap5_boards_compat[] __initconst = { "ti,omap5432", "ti,omap5430", "ti,omap5", @@ -221,7 +221,7 @@ MACHINE_END #endif #ifdef CONFIG_SOC_AM43XX -static const char *am43_boards_compat[] __initdata = { +static const char *am43_boards_compat[] __initconst = { "ti,am4372", "ti,am43", NULL, @@ -240,13 +240,13 @@ MACHINE_END #endif #ifdef CONFIG_SOC_DRA7XX -static const char *dra7xx_boards_compat[] __initdata = { - "ti,dra7xx", +static const char *dra74x_boards_compat[] __initconst = { + "ti,dra742", "ti,dra7", NULL, }; -DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") +DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)") .reserve = omap_reserve, .smp = smp_ops(omap4_smp_ops), .map_io = omap5_map_io, @@ -255,7 +255,24 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)") .init_irq = omap_gic_of_init, .init_machine = omap_generic_init, .init_time = omap5_realtime_timer_init, - .dt_compat = dra7xx_boards_compat, + .dt_compat = dra74x_boards_compat, + .restart = omap44xx_restart, +MACHINE_END + +static const char *dra72x_boards_compat[] __initconst = { + "ti,dra722", + NULL, +}; + +DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap5_map_io, + .init_early = dra7xx_init_early, + .init_late = dra7xx_init_late, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra72x_boards_compat, .restart = omap44xx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index d6ed819ff15c..660bfc5a70d7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,7 +33,6 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> -#include <linux/usb/usb_phy_gen_xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 119efaf5808a..a2e035e0792a 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -121,11 +121,7 @@ static struct platform_device omap3stalker_tfp410_device = { static struct connector_atv_platform_data omap3stalker_tv_pdata = { .name = "tv", .source = "venc.0", -#if defined(CONFIG_OMAP2_VENC_OUT_TYPE_SVIDEO) - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, -#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE) .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, -#endif .invert_polarity = false, }; diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c index 8f5121b89688..eb8c75ec3b1a 100644 --- a/arch/arm/mach-omap2/cclock3xxx_data.c +++ b/arch/arm/mach-omap2/cclock3xxx_data.c @@ -456,7 +456,8 @@ static struct clk_hw_omap dpll4_m5x2_ck_hw = { .clkdm_name = "dpll4_clkdm", }; -DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops); +DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, + dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT); static struct clk dpll4_m5x2_ck_3630 = { .name = "dpll4_m5x2_ck", diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c index 3ff32543493c..59cf310bc1e9 100644 --- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c +++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c @@ -138,7 +138,7 @@ int omap2_reprogram_dpllcore(struct clk_hw *hw, unsigned long rate, if (!dd) return -EINVAL; - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll = readl_relaxed(dd->mult_div1_reg); tmpset.cm_clksel1_pll &= ~(dd->mult_mask | dd->div1_mask); div = ((curr_prcm_set->xtal_speed / 1000000) - 1); diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c index 19f54d433490..0717dff1bc04 100644 --- a/arch/arm/mach-omap2/clkt2xxx_osc.c +++ b/arch/arm/mach-omap2/clkt2xxx_osc.c @@ -39,9 +39,9 @@ int omap2_enable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); return 0; } @@ -57,9 +57,9 @@ void omap2_disable_osc_ck(struct clk_hw *clk) { u32 pcc; - pcc = __raw_readl(prcm_clksrc_ctrl); + pcc = readl_relaxed(prcm_clksrc_ctrl); - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + writel_relaxed(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } unsigned long omap2_osc_clk_recalc(struct clk_hw *clk, diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c index f467d072cd02..58dd3a9b726c 100644 --- a/arch/arm/mach-omap2/clkt2xxx_sys.c +++ b/arch/arm/mach-omap2/clkt2xxx_sys.c @@ -33,7 +33,7 @@ u32 omap2xxx_get_sysclkdiv(void) { u32 div; - div = __raw_readl(prcm_clksrc_ctrl); + div = readl_relaxed(prcm_clksrc_ctrl); div &= OMAP_SYSCLKDIV_MASK; div >>= OMAP_SYSCLKDIV_SHIFT; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f17f00697cc0..82c37b1becc4 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -18,7 +18,6 @@ #include "powerdomain.h" #include "clock.h" -#include "omap_hwmod.h" /* * Clockdomain flags @@ -98,6 +97,8 @@ struct clkdm_dep { /* Possible flags for struct clockdomain._flags */ #define _CLKDM_FLAG_HWSUP_ENABLED BIT(0) +struct omap_hwmod; + /** * struct clockdomain - OMAP clockdomain * @name: clockdomain name diff --git a/arch/arm/mach-omap2/cm2xxx.c b/arch/arm/mach-omap2/cm2xxx.c index ce25abbcffae..8be6ea50c092 100644 --- a/arch/arm/mach-omap2/cm2xxx.c +++ b/arch/arm/mach-omap2/cm2xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx.h" #include "cm.h" #include "cm2xxx.h" @@ -390,7 +387,7 @@ void omap2xxx_cm_set_mod_dividers(u32 mpu, u32 dsp, u32 gfx, u32 core, u32 mdm) tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; omap2_cm_write_mod_reg(core | tmp, CORE_MOD, CM_CLKSEL1); - if (cpu_is_omap2430()) + if (mdm) omap2_cm_write_mod_reg(mdm, OMAP2430_MDM_MOD, CM_CLKSEL); } @@ -405,19 +402,11 @@ static struct cm_ll_data omap2xxx_cm_ll_data = { int __init omap2xxx_cm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return cm_register(&omap2xxx_cm_ll_data); } static void __exit omap2xxx_cm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap2xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap2xxx_cm_ll_data); } __exitcall(omap2xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h index bfbd16fe9151..72928a3ce2aa 100644 --- a/arch/arm/mach-omap2/cm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h @@ -52,12 +52,12 @@ static inline u32 omap2_cm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(cm_base + module + idx); + return readl_relaxed(cm_base + module + idx); } static inline void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, cm_base + module + idx); + writel_relaxed(val, cm_base + module + idx); } /* Read-modify-write a register in a CM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 40a22e5649ae..b3f99e93def0 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -50,13 +50,13 @@ /* Read a register in a CM instance */ static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) { - return __raw_readl(cm_base + inst + idx); + return readl_relaxed(cm_base + inst + idx); } /* Write into a register in a CM */ static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) { - __raw_writel(val, cm_base + inst + idx); + writel_relaxed(val, cm_base + inst + idx); } /* Read-modify-write a register in CM */ diff --git a/arch/arm/mach-omap2/cm33xx.h b/arch/arm/mach-omap2/cm33xx.h index cfb8891b0c0e..15a778ce7707 100644 --- a/arch/arm/mach-omap2/cm33xx.h +++ b/arch/arm/mach-omap2/cm33xx.h @@ -17,11 +17,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM_33XX_H #define __ARCH_ARM_MACH_OMAP2_CM_33XX_H -#include "common.h" - #include "cm.h" #include "cm-regbits-33xx.h" -#include "iomap.h" /* CM base address */ #define AM33XX_CM_BASE 0x44e00000 diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index f6f028867bfe..129a4e7f6ef5 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -18,9 +18,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "soc.h" -#include "iomap.h" -#include "common.h" #include "prm2xxx_3xxx.h" #include "cm.h" #include "cm3xxx.h" @@ -388,7 +385,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1); cm_context.iva2_cm_clksel2 = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2); - cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG); + cm_context.cm_sysconfig = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_SYSCONFIG); cm_context.sgx_cm_clksel = omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL); cm_context.dss_cm_clksel = @@ -418,7 +416,8 @@ void omap3_cm_save_context(void) omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5); cm_context.pll_cm_clken2 = omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2); - cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL); + cm_context.cm_polctrl = + omap2_cm_read_mod_reg(OCP_MOD, OMAP3430_CM_POLCTRL); cm_context.iva2_cm_fclken = omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN); cm_context.iva2_cm_clken_pll = @@ -519,7 +518,8 @@ void omap3_cm_restore_context(void) CM_CLKSEL1); omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD, CM_CLKSEL2); - __raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG); + omap2_cm_write_mod_reg(cm_context.cm_sysconfig, OCP_MOD, + OMAP3430_CM_SYSCONFIG); omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD, CM_CLKSEL); omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD, @@ -547,7 +547,8 @@ void omap3_cm_restore_context(void) OMAP3430ES2_CM_CLKSEL5); omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD, OMAP3430ES2_CM_CLKEN2); - __raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL); + omap2_cm_write_mod_reg(cm_context.cm_polctrl, OCP_MOD, + OMAP3430_CM_POLCTRL); omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD, CM_FCLKEN); omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD, @@ -669,19 +670,11 @@ static struct cm_ll_data omap3xxx_cm_ll_data = { int __init omap3xxx_cm_init(void) { - if (!cpu_is_omap34xx()) - return 0; - return cm_register(&omap3xxx_cm_ll_data); } static void __exit omap3xxx_cm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(cm_unregister(&omap3xxx_cm_ll_data), - "%s: cm_ll_data function pointer mismatch\n", __func__); + cm_unregister(&omap3xxx_cm_ll_data); } __exitcall(omap3xxx_cm_exit); diff --git a/arch/arm/mach-omap2/cm3xxx.h b/arch/arm/mach-omap2/cm3xxx.h index 8224c91b4d7a..7a16b5598127 100644 --- a/arch/arm/mach-omap2/cm3xxx.h +++ b/arch/arm/mach-omap2/cm3xxx.h @@ -29,9 +29,8 @@ * These registers appear once per CM module. */ -#define OMAP3430_CM_REVISION OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000) -#define OMAP3430_CM_SYSCONFIG OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010) -#define OMAP3430_CM_POLCTRL OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c) +#define OMAP3430_CM_SYSCONFIG 0x0010 +#define OMAP3430_CM_POLCTRL 0x009c #define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070 #define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070) diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c index 535d66e2822c..fe5cc7bae489 100644 --- a/arch/arm/mach-omap2/cm44xx.c +++ b/arch/arm/mach-omap2/cm44xx.c @@ -18,35 +18,32 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "cm.h" #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm-regbits-44xx.h" /* CM1 hardware module low-level functions */ /* Read a register in CM1 */ u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg)); + return readl_relaxed(cm_base + inst + reg); } /* Write into a register in CM1 */ void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg)); + writel_relaxed(val, cm_base + inst + reg); } /* Read a register in CM2 */ u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg)); + return readl_relaxed(cm2_base + inst + reg); } /* Write into a register in CM2 */ void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg)); + writel_relaxed(val, cm2_base + inst + reg); } diff --git a/arch/arm/mach-omap2/cm_common.c b/arch/arm/mach-omap2/cm_common.c index 40b3b5a84458..8f6c4710877e 100644 --- a/arch/arm/mach-omap2/cm_common.c +++ b/arch/arm/mach-omap2/cm_common.c @@ -14,11 +14,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/errno.h> +#include <linux/bug.h> #include "cm2xxx.h" #include "cm3xxx.h" #include "cm44xx.h" -#include "common.h" /* * cm_ll_data: function pointers to SoC-specific implementations of diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index f5c4731b6f06..12aca56942c0 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -21,8 +21,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "iomap.h" -#include "common.h" #include "clockdomain.h" #include "cm.h" #include "cm1_44xx.h" @@ -30,12 +28,18 @@ #include "cm44xx.h" #include "cminst44xx.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prcm44xx.h" #include "prm44xx.h" #include "prcm_mpu44xx.h" #include "prcm-common.h" +#define OMAP4430_IDLEST_SHIFT 16 +#define OMAP4430_IDLEST_MASK (0x3 << 16) +#define OMAP4430_CLKTRCTRL_SHIFT 0 +#define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) +#define OMAP4430_MODULEMODE_SHIFT 0 +#define OMAP4430_MODULEMODE_MASK (0x3 << 0) + /* * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: * @@ -116,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - return __raw_readl(_cm_bases[part] + inst + idx); + return readl_relaxed(_cm_bases[part] + inst + idx); } /* Write into a register in a CM instance */ @@ -125,7 +129,7 @@ void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_cm_bases[part]); - __raw_writel(val, _cm_bases[part] + inst + idx); + writel_relaxed(val, _cm_bases[part] + inst + idx); } /* Read-modify-write a register in CM1. Caller must lock */ diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index 44bb4d544dcf..751f3549bf6f 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -151,32 +151,32 @@ void __iomem *omap_ctrl_base_get(void) u8 omap_ctrl_readb(u16 offset) { - return __raw_readb(OMAP_CTRL_REGADDR(offset)); + return readb_relaxed(OMAP_CTRL_REGADDR(offset)); } u16 omap_ctrl_readw(u16 offset) { - return __raw_readw(OMAP_CTRL_REGADDR(offset)); + return readw_relaxed(OMAP_CTRL_REGADDR(offset)); } u32 omap_ctrl_readl(u16 offset) { - return __raw_readl(OMAP_CTRL_REGADDR(offset)); + return readl_relaxed(OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writeb(u8 val, u16 offset) { - __raw_writeb(val, OMAP_CTRL_REGADDR(offset)); + writeb_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writew(u16 val, u16 offset) { - __raw_writew(val, OMAP_CTRL_REGADDR(offset)); + writew_relaxed(val, OMAP_CTRL_REGADDR(offset)); } void omap_ctrl_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP_CTRL_REGADDR(offset)); + writel_relaxed(val, OMAP_CTRL_REGADDR(offset)); } /* @@ -188,12 +188,12 @@ void omap_ctrl_writel(u32 val, u16 offset) u32 omap4_ctrl_pad_readl(u16 offset) { - return __raw_readl(OMAP4_CTRL_PAD_REGADDR(offset)); + return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset)); } void omap4_ctrl_pad_writel(u32 val, u16 offset) { - __raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset)); + writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset)); } #ifdef CONFIG_ARCH_OMAP3 @@ -222,7 +222,7 @@ void omap3_ctrl_write_boot_mode(u8 bootmode) * * XXX This should use some omap_ctrl_writel()-type function */ - __raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); + writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); } #endif @@ -285,7 +285,7 @@ void omap3_clear_scratchpad_contents(void) if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) & OMAP3430_GLOBAL_COLD_RST_MASK) { for ( ; offset <= max_offset; offset += 0x4) - __raw_writel(0x0, (v_addr + offset)); + writel_relaxed(0x0, (v_addr + offset)); omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK, OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET); diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 01fc710c8181..2498ab025fa2 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -14,6 +14,7 @@ #include <linux/cpuidle.h> #include <linux/cpu_pm.h> #include <linux/export.h> +#include <linux/clockchips.h> #include <asm/cpuidle.h> #include <asm/proc-fns.h> @@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, { struct idle_statedata *cx = state_ptr + index; u32 mpuss_can_lose_context = 0; + int cpu_id = smp_processor_id(); /* * CPU0 has to wait and stay ON until CPU1 is OFF state. @@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) && (cx->mpu_logic_state == PWRDM_POWER_OFF); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id); + /* * Call idle CPU PM enter notifier chain so that * VFP and per CPU interrupt context is saved. @@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, if (dev->cpu == 0 && mpuss_can_lose_context) cpu_cluster_pm_exit(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id); + fail: cpuidle_coupled_parallel_barrier(dev, &abort_barrier); cpu_done[dev->cpu] = false; @@ -172,6 +178,16 @@ fail: return index; } +/* + * For each cpu, setup the broadcast timer because local timers + * stops for the states above C1. + */ +static void omap_setup_broadcast_timer(void *arg) +{ + int cpu = smp_processor_id(); + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu); +} + static struct cpuidle_driver omap4_idle_driver = { .name = "omap4_idle", .owner = THIS_MODULE, @@ -189,8 +205,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */ .exit_latency = 328 + 440, .target_residency = 960, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C2", .desc = "CPUx OFF, MPUSS CSWR", @@ -199,8 +214,7 @@ static struct cpuidle_driver omap4_idle_driver = { /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */ .exit_latency = 460 + 518, .target_residency = 1100, - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED | - CPUIDLE_FLAG_TIMER_STOP, + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED, .enter = omap_enter_idle_coupled, .name = "C3", .desc = "CPUx OFF, MPUSS OSWR", @@ -231,5 +245,8 @@ int __init omap4_idle_init(void) if (!cpu_clkdm[0] || !cpu_clkdm[1]) return -ENODEV; + /* Configure the broadcast timer on each cpu */ + on_each_cpu(omap_setup_broadcast_timer, NULL, 1); + return cpuidle_register(&omap4_idle_driver, cpu_online_mask); } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 16d33d831287..bf852d7ae951 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -279,6 +279,8 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_OMAP4; else if (soc_is_omap54xx()) return OMAPDSS_VER_OMAP5; + else if (soc_is_am43xx()) + return OMAPDSS_VER_AM43xx; else return OMAPDSS_VER_UNKNOWN; } @@ -555,65 +557,9 @@ int omap_dss_reset(struct omap_hwmod *oh) return r; } -/* list of 'compatible' nodes to convert to omapdss specific */ -static const char * const dss_compat_conv_list[] __initconst = { - "composite-connector", - "dvi-connector", - "hdmi-connector", - "panel-dpi", - "panel-dsi-cm", - "sony,acx565akm", - "svideo-connector", - "ti,tfp410", - "ti,tpd12s015", -}; - -/* prepend compatible string with "omapdss," */ -static __init void omapdss_omapify_node(struct device_node *node, - const char *compat) -{ - char *new_compat; - struct property *prop; - - new_compat = kasprintf(GFP_KERNEL, "omapdss,%s", compat); - - prop = kzalloc(sizeof(*prop), GFP_KERNEL); - - if (!prop) { - pr_err("omapdss_omapify_node: kzalloc failed\n"); - return; - } - - prop->name = "compatible"; - prop->value = new_compat; - prop->length = strlen(new_compat) + 1; - - of_update_property(node, prop); -} - -/* - * As omapdss panel drivers are omapdss specific, but we want to define the - * DT-data in generic manner, we convert the compatible strings of the panel - * nodes from "panel-foo" to "omapdss,panel-foo". This way we can have both - * correct DT data and omapdss specific drivers. - * - * When we get generic panel drivers to the kernel, this will be removed. - */ void __init omapdss_early_init_of(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(dss_compat_conv_list); ++i) { - const char *compat = dss_compat_conv_list[i]; - struct device_node *node = NULL; - - while ((node = of_find_compatible_node(node, NULL, compat))) { - if (!of_device_is_available(node)) - continue; - omapdss_omapify_node(node, compat); - } - } } struct device_node * __init omapdss_find_dss_of_node(void) @@ -632,6 +578,10 @@ struct device_node * __init omapdss_find_dss_of_node(void) if (node) return node; + node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss"); + if (node) + return node; + return NULL; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index 5689c88d986d..a6d2cf1f8d02 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -91,7 +91,7 @@ static inline void dma_write(u32 val, int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - __raw_writel(val, addr); + writel_relaxed(val, addr); } static inline u32 dma_read(int reg, int lch) @@ -101,7 +101,7 @@ static inline u32 dma_read(int reg, int lch) addr += reg_map[reg].offset; addr += reg_map[reg].stride * lch; - return __raw_readl(addr); + return readl_relaxed(addr); } static void omap2_clear_dma(int lch) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4349e82debfe..17cd39360afe 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -46,7 +46,7 @@ static struct platform_device gpmc_nand_device = { static bool gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) { /* platforms which support all ECC schemes */ - if (soc_is_am33xx() || cpu_is_omap44xx() || + if (soc_is_am33xx() || soc_is_am43xx() || cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) return 1; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 9fe8c949305c..852b19a367f0 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -170,12 +170,12 @@ static irqreturn_t gpmc_handle_irq(int irq, void *dev); static void gpmc_write_reg(int idx, u32 val) { - __raw_writel(val, gpmc_base + idx); + writel_relaxed(val, gpmc_base + idx); } static u32 gpmc_read_reg(int idx) { - return __raw_readl(gpmc_base + idx); + return readl_relaxed(gpmc_base + idx); } void gpmc_cs_write_reg(int cs, int idx, u32 val) @@ -183,7 +183,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writel(val, reg_addr); + writel_relaxed(val, reg_addr); } static u32 gpmc_cs_read_reg(int cs, int idx) @@ -191,7 +191,7 @@ static u32 gpmc_cs_read_reg(int cs, int idx) void __iomem *reg_addr; reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readl(reg_addr); + return readl_relaxed(reg_addr); } /* TODO: Add support for gpmc_fck to clock framework and use it */ diff --git a/arch/arm/mach-omap2/hdq1w.c b/arch/arm/mach-omap2/hdq1w.c index cbc8e3c480e0..f78b4a161959 100644 --- a/arch/arm/mach-omap2/hdq1w.c +++ b/arch/arm/mach-omap2/hdq1w.c @@ -76,6 +76,7 @@ int omap_hdq1w_reset(struct omap_hwmod *oh) return 0; } +#ifndef CONFIG_OF static int __init omap_init_hdq(void) { int id = -1; @@ -95,3 +96,4 @@ static int __init omap_init_hdq(void) return 0; } omap_arch_initcall(omap_init_hdq); +#endif diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 157412e4273a..43969da5d50b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -94,7 +94,7 @@ EXPORT_SYMBOL(omap_type); #define OMAP_TAP_DIE_ID_44XX_2 0x020c #define OMAP_TAP_DIE_ID_44XX_3 0x0210 -#define read_tap_reg(reg) __raw_readl(tap_base + (reg)) +#define read_tap_reg(reg) readl_relaxed(tap_base + (reg)) struct omap_id { u16 hawkeye; /* Silicon type (Hawkeye id) */ @@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void) pr_info("%s %s\n", soc_name, soc_rev); } +void __init dra7xxx_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + switch (hawkeye) { + case 0xb990: + switch (rev) { + case 0: + omap_revision = DRA752_REV_ES1_0; + break; + case 1: + default: + omap_revision = DRA752_REV_ES1_1; + } + break; + + default: + /* Unknown default to latest silicon rev as default*/ + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + __func__, idcode, hawkeye, rev); + omap_revision = DRA752_REV_ES1_1; + } + + sprintf(soc_name, "DRA%03x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, + (omap_rev() >> 8) & 0xf); + + pr_info("%s %s\n", soc_name, soc_rev); +} + /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets @@ -669,6 +704,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP5"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); + else if (soc_is_dra7xx()) + return kasprintf(GFP_KERNEL, "DRA7"); else return kasprintf(GFP_KERNEL, "Unknown"); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 4e2df49991ad..8f559450c876 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -695,6 +695,7 @@ void __init dra7xx_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap44xx_prm_init(); + dra7xxx_check_revision(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); dra7xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 6037a9a01ed5..35b8590c322e 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -83,12 +83,12 @@ struct omap3_intc_regs { static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) { - __raw_writel(val, bank->base_reg + reg); + writel_relaxed(val, bank->base_reg + reg); } static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) { - return __raw_readl(bank->base_reg + reg); + return readl_relaxed(bank->base_reg + reg); } /* XXX: FIQ and additional INTC support (only MPU at the moment) */ diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 48094b58c88f..fd88edeb027f 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -70,18 +70,18 @@ struct omap_mux_partition *omap_mux_get(const char *name) u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - return __raw_readb(partition->base + reg); + return readb_relaxed(partition->base + reg); else - return __raw_readw(partition->base + reg); + return readw_relaxed(partition->base + reg); } void omap_mux_write(struct omap_mux_partition *partition, u16 val, u16 reg) { if (partition->flags & OMAP_MUX_REG_8BIT) - __raw_writeb(val, partition->base + reg); + writeb_relaxed(val, partition->base + reg); else - __raw_writew(val, partition->base + reg); + writew_relaxed(val, partition->base + reg); } void omap_mux_write_array(struct omap_mux_partition *partition, diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 40c5d5f1451c..4993d4bfe9b2 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -31,10 +31,6 @@ * register AuxCoreBoot0. */ ENTRY(omap5_secondary_startup) -.arm -THUMB( adr r9, BSYM(wait) ) @ CPU may be entered in ARM mode. -THUMB( bx r9 ) @ If this is a Thumb-2 kernel, -THUMB( .thumb ) @ switch to Thumb now. wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 ldr r0, [r2] mov r0, r0, lsr #5 @@ -43,7 +39,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 cmp r0, r4 bne wait b secondary_startup -END(omap5_secondary_startup) +ENDPROC(omap5_secondary_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 458f72f9dc8f..971791fe9a3f 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -39,7 +39,7 @@ void __ref omap4_cpu_die(unsigned int cpu) if (omap_modify_auxcoreboot0(0x0, 0x200) != 0x0) pr_err("Secure clear status failed\n"); } else { - __raw_writel(0, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0, base + OMAP_AUX_CORE_BOOT_0); } @@ -53,7 +53,7 @@ void __ref omap4_cpu_die(unsigned int cpu) boot_cpu = omap_read_auxcoreboot0(); else boot_cpu = - __raw_readl(base + OMAP_AUX_CORE_BOOT_0) >> 5; + readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5; if (boot_cpu == smp_processor_id()) { /* diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 61cb77f8cf12..4001325f90fb 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -116,7 +116,7 @@ static inline void set_cpu_wakeup_addr(unsigned int cpu_id, u32 addr) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(addr, pm_info->wkup_sar_addr); + writel_relaxed(addr, pm_info->wkup_sar_addr); } /* @@ -141,7 +141,7 @@ static void scu_pwrst_prepare(unsigned int cpu_id, unsigned int cpu_state) break; } - __raw_writel(scu_pwr_st, pm_info->scu_sar_addr); + writel_relaxed(scu_pwr_st, pm_info->scu_sar_addr); } /* Helper functions for MPUSS OSWR */ @@ -179,7 +179,7 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) { struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu_id); - __raw_writel(save_state, pm_info->l2x0_sar_addr); + writel_relaxed(save_state, pm_info->l2x0_sar_addr); } /* @@ -189,9 +189,9 @@ static void l2x0_pwrst_prepare(unsigned int cpu_id, unsigned int save_state) #ifdef CONFIG_CACHE_L2X0 static void __init save_l2x0_context(void) { - __raw_writel(l2x0_saved_regs.aux_ctrl, + writel_relaxed(l2x0_saved_regs.aux_ctrl, sar_base + L2X0_AUXCTRL_OFFSET); - __raw_writel(l2x0_saved_regs.prefetch_ctrl, + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, sar_base + L2X0_PREFETCH_CTRL_OFFSET); } #else @@ -382,9 +382,9 @@ int __init omap4_mpuss_init(void) /* Save device type on scratchpad for low level code to use */ if (omap_type() != OMAP2_DEVICE_TYPE_GP) - __raw_writel(1, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(1, sar_base + OMAP_TYPE_OFFSET); else - __raw_writel(0, sar_base + OMAP_TYPE_OFFSET); + writel_relaxed(0, sar_base + OMAP_TYPE_OFFSET); save_l2x0_context(); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 17550aa39d0f..256e84ef0f67 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -99,7 +99,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) if (omap_secure_apis_support()) omap_modify_auxcoreboot0(0x200, 0xfffffdff); else - __raw_writel(0x20, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); @@ -227,8 +227,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else - __raw_writel(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); } diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 693fe486e917..37843a7d3639 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -60,19 +60,19 @@ static unsigned int omap_secure_apis; */ static inline u32 wakeupgen_readl(u8 idx, u32 cpu) { - return __raw_readl(wakeupgen_base + OMAP_WKG_ENB_A_0 + + return readl_relaxed(wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void wakeupgen_writel(u32 val, u8 idx, u32 cpu) { - __raw_writel(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + + writel_relaxed(val, wakeupgen_base + OMAP_WKG_ENB_A_0 + (cpu * CPU_ENA_OFFSET) + (idx * 4)); } static inline void sar_writel(u32 val, u32 offset, u8 idx) { - __raw_writel(val, sar_base + offset + (idx * 4)); + writel_relaxed(val, sar_base + offset + (idx * 4)); } static inline int _wakeupgen_get_irq_info(u32 irq, u32 *bit_posn, u8 *reg_index) @@ -231,21 +231,21 @@ static inline void omap4_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); - __raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_1); + writel_relaxed(val, sar_base + AUXCOREBOOT1_OFFSET); /* Save SyncReq generation logic */ - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); - __raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN); - __raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_MASK); + writel_relaxed(val, sar_base + PTMSYNCREQ_MASK_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_PTMSYNCREQ_EN); + writel_relaxed(val, sar_base + PTMSYNCREQ_EN_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + SAR_BACKUP_STATUS_OFFSET); } @@ -264,15 +264,15 @@ static inline void omap5_irq_save_context(void) } /* Save AuxBoot* registers */ - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); - val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); - __raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET); + val = readl_relaxed(wakeupgen_base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET); /* Set the Backup Bit Mask status */ - val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + val = readl_relaxed(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); val |= SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); + writel_relaxed(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET); } @@ -306,9 +306,9 @@ static void irq_sar_clear(void) if (soc_is_omap54xx()) offset = OMAP5_SAR_BACKUP_STATUS_OFFSET; - val = __raw_readl(sar_base + offset); + val = readl_relaxed(sar_base + offset); val &= ~SAR_BACKUP_STATUS_WAKEUPGEN; - __raw_writel(val, sar_base + offset); + writel_relaxed(val, sar_base + offset); } /* diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index c41ff8b638e1..326cd982a3cb 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -125,25 +125,25 @@ void __init gic_init_irq(void) void gic_dist_disable(void) { if (gic_dist_base_addr) - __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x0, gic_dist_base_addr + GIC_DIST_CTRL); } void gic_dist_enable(void) { if (gic_dist_base_addr) - __raw_writel(0x1, gic_dist_base_addr + GIC_DIST_CTRL); + writel_relaxed(0x1, gic_dist_base_addr + GIC_DIST_CTRL); } bool gic_dist_disabled(void) { - return !(__raw_readl(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); + return !(readl_relaxed(gic_dist_base_addr + GIC_DIST_CTRL) & 0x1); } void gic_timer_retrigger(void) { - u32 twd_int = __raw_readl(twd_base + TWD_TIMER_INTSTAT); - u32 gic_int = __raw_readl(gic_dist_base_addr + GIC_DIST_PENDING_SET); - u32 twd_ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL); + u32 twd_int = readl_relaxed(twd_base + TWD_TIMER_INTSTAT); + u32 gic_int = readl_relaxed(gic_dist_base_addr + GIC_DIST_PENDING_SET); + u32 twd_ctrl = readl_relaxed(twd_base + TWD_TIMER_CONTROL); if (twd_int && !(gic_int & BIT(IRQ_LOCALTIMER))) { /* @@ -151,11 +151,11 @@ void gic_timer_retrigger(void) * disabled. Ack the pending interrupt, and retrigger it. */ pr_warn("%s: lost localtimer interrupt\n", __func__); - __raw_writel(1, twd_base + TWD_TIMER_INTSTAT); + writel_relaxed(1, twd_base + TWD_TIMER_INTSTAT); if (!(twd_ctrl & TWD_TIMER_CONTROL_PERIODIC)) { - __raw_writel(1, twd_base + TWD_TIMER_COUNTER); + writel_relaxed(1, twd_base + TWD_TIMER_COUNTER); twd_ctrl |= TWD_TIMER_CONTROL_ENABLE; - __raw_writel(twd_ctrl, twd_base + TWD_TIMER_CONTROL); + writel_relaxed(twd_ctrl, twd_base + TWD_TIMER_CONTROL); } } } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 66c60fe1104c..f7bb435bb543 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -72,7 +72,7 @@ * | (../mach-omap2/omap_hwmod*) | * +-------------------------------+ * | OMAP clock/PRCM/register fns | - * | (__raw_{read,write}l, clk*) | + * | ({read,write}l_relaxed, clk*) | * +-------------------------------+ * * Device drivers should not contain any OMAP-specific code or data in @@ -3230,17 +3230,17 @@ static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh, u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - return __raw_readw(oh->_mpu_rt_va + reg_offs); + return readw_relaxed(oh->_mpu_rt_va + reg_offs); else - return __raw_readl(oh->_mpu_rt_va + reg_offs); + return readl_relaxed(oh->_mpu_rt_va + reg_offs); } void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) { if (oh->flags & HWMOD_16BIT_REG) - __raw_writew(v, oh->_mpu_rt_va + reg_offs); + writew_relaxed(v, oh->_mpu_rt_va + reg_offs); else - __raw_writel(v, oh->_mpu_rt_va + reg_offs); + writel_relaxed(v, oh->_mpu_rt_va + reg_offs); } /** diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 0f178623e7da..a579b89ce9b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -24,6 +24,7 @@ #include "prm33xx.h" #include "omap_hwmod_33xx_43xx_common_data.h" #include "prcm43xx.h" +#include "common.h" #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 71ac7d5f3385..1cd0cfdc03e0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3689,12 +3689,9 @@ static struct omap_hwmod_class_sysconfig omap34xx_ssi_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0010, .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_EMUFREE | - SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1219280bb976..41e54f759934 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3635,15 +3635,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_dmic_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> dmic (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_dmic_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* dsp -> iva */ @@ -4209,15 +4201,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp1_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp1 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp2 */ @@ -4225,15 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp2_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp2 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp3 */ @@ -4241,15 +4217,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp3_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp3 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcbsp4 */ @@ -4265,15 +4233,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcpdm_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcpdm (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcpdm_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcspi1 */ @@ -4575,15 +4535,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer5_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer5 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer5_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer6 */ @@ -4591,15 +4543,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer6_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer6 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer6_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer7 */ @@ -4607,15 +4551,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer7_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer7 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer7_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer8 */ @@ -4623,15 +4559,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer8_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer8 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer8_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> timer9 */ @@ -4831,7 +4759,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_instr__debugss, &omap44xx_l4_cfg__dma_system, &omap44xx_l4_abe__dmic, - &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, @@ -4874,14 +4801,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__mcasp, &omap44xx_l4_abe__mcasp_dma, &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp1_dma, &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp2_dma, &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_abe__mcbsp3_dma, &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_abe__mcpdm_dma, &omap44xx_l4_per__mcspi1, &omap44xx_l4_per__mcspi2, &omap44xx_l4_per__mcspi3, @@ -4913,13 +4836,9 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer3, &omap44xx_l4_per__timer4, &omap44xx_l4_abe__timer5, - &omap44xx_l4_abe__timer5_dma, &omap44xx_l4_abe__timer6, - &omap44xx_l4_abe__timer6_dma, &omap44xx_l4_abe__timer7, - &omap44xx_l4_abe__timer7_dma, &omap44xx_l4_abe__timer8, - &omap44xx_l4_abe__timer8_dma, &omap44xx_l4_per__timer9, &omap44xx_l4_per__timer10, &omap44xx_l4_per__timer11, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 892317294fdc..290213f2cbe3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = { }; /* + * 'dss' class + * display sub-system + */ +static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = { + .rev_offs = 0x0000, + .syss_offs = 0x0014, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap54xx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap54xx_dss_sysc, + .reset = omap_dss_reset, +}; + +/* dss */ +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "32khz_clk", .clk = "dss_32khz_clk" }, + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hwmod = { + .name = "dss_core", + .class = &omap54xx_dss_hwmod_class, + .clkdm_name = "dss_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap54xx_dispc_sysc, +}; + +/* dss_dispc */ +static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +/* dss_dispc dev_attr */ +static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { + .has_framedonetv_irq = 1, + .manager_count = 4, +}; + +static struct omap_hwmod omap54xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap54xx_dispc_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dispc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), + .dev_attr = &dss_dispc_dev_attr, +}; + +/* + * 'dsi1' class + * display serial interface controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = { + .name = "dsi1", + .sysc = &omap54xx_dsi1_sysc, +}; + +/* dss_dsi1_a */ +static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { + .name = "dss_dsi1", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_a_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), +}; + +/* dss_dsi1_c */ +static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { + .name = "dss_dsi2", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_c_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), +}; + +/* + * 'hdmi' class + * hdmi controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = { + .name = "hdmi", + .sysc = &omap54xx_hdmi_sysc, +}; + +static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { + .name = "dss_hdmi", + .class = &omap54xx_hdmi_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_48mhz_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_hdmi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap54xx_rfbi_sysc, +}; + +/* dss_rfbi */ +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "l3_iclk_div" }, +}; + +static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap54xx_rfbi_hwmod_class, + .clkdm_name = "dss_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), +}; + +/* * 'emif' class * external memory interface no1 (wrapper) */ @@ -895,7 +1124,7 @@ static struct omap_hwmod omap54xx_mcpdm_hwmod = { * current exception. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .main_clk = "pad_clks_ck", .prcm = { .omap4 = { @@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = { .user = OCP_USER_MPU, }; +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dispc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_a */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_a_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_c */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_c_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hdmi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_rfbi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__dma_system, &omap54xx_l4_abe__dmic, &omap54xx_l4_cfg__mmu_dsp, + &omap54xx_l3_main_2__dss, + &omap54xx_l3_main_2__dss_dispc, + &omap54xx_l3_main_2__dss_dsi1_a, + &omap54xx_l3_main_2__dss_dsi1_c, + &omap54xx_l3_main_2__dss_hdmi, + &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_wkup__gpio1, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 810c205d668b..20b4398cec05 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2318,21 +2318,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = { - { - .pa_start = 0x4a080000, - .pa_end = 0x4a08001f, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_cfg -> ocp2scp1 */ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = { .master = &dra7xx_l4_cfg_hwmod, .slave = &dra7xx_ocp2scp1_hwmod, .clk = "l4_root_clk_div", - .addr = dra7xx_ocp2scp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index eb8a25de67ed..50640b38f0bf 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -57,7 +57,7 @@ static int __init omap4430_phy_power_down(void) } /* Power down the phy */ - __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); + writel_relaxed(PHY_PD, ctrl_base + CONTROL_DEV_CONF); iounmap(ctrl_base); @@ -162,7 +162,7 @@ void ti81xx_musb_phy_power(u8 on) return; } - usbphycfg = __raw_readl(scm_base + USBCTRL0); + usbphycfg = readl_relaxed(scm_base + USBCTRL0); if (on) { if (cpu_is_ti816x()) { @@ -181,7 +181,7 @@ void ti81xx_musb_phy_power(u8 on) usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN; } - __raw_writel(usbphycfg, scm_base + USBCTRL0); + writel_relaxed(usbphycfg, scm_base + USBCTRL0); iounmap(scm_base); } diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 615e5b1fb025..6bf626700557 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -46,15 +46,8 @@ static bool is_offset_valid; static u8 smps_offset; -/* - * Flag to ensure Smartreflex bit in TWL - * being cleared in board file is not overwritten. - */ -static bool __initdata twl_sr_enable_autoinit; -#define TWL4030_DCDC_GLOBAL_CFG 0x06 #define REG_SMPS_OFFSET 0xE0 -#define SMARTREFLEX_ENABLE BIT(3) static unsigned long twl4030_vsel_to_uv(const u8 vsel) { @@ -251,18 +244,6 @@ int __init omap3_twl_init(void) if (!cpu_is_omap34xx()) return -ENODEV; - /* - * The smartreflex bit on twl4030 specifies if the setting of voltage - * is done over the I2C_SR path. Since this setting is independent of - * the actual usage of smartreflex AVS module, we enable TWL SR bit - * by default irrespective of whether smartreflex AVS module is enabled - * on the OMAP side or not. This is because without this bit enabled, - * the voltage scaling through vp forceupdate/bypass mechanism of - * voltage scaling will not function on TWL over I2C_SR. - */ - if (!twl_sr_enable_autoinit) - omap3_twl_set_sr_bit(true); - voltdm = voltdm_lookup("mpu_iva"); omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); @@ -271,44 +252,3 @@ int __init omap3_twl_init(void) return 0; } - -/** - * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL - * @enable: enable SR mode in twl or not - * - * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure - * voltage scaling through OMAP SR works. Else, the smartreflex bit - * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but - * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct - * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, - * in those scenarios this bit is to be cleared (enable = false). - * - * Returns 0 on success, error is returned if I2C read/write fails. - */ -int __init omap3_twl_set_sr_bit(bool enable) -{ - u8 temp; - int ret; - if (twl_sr_enable_autoinit) - pr_warning("%s: unexpected multiple calls\n", __func__); - - ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp, - TWL4030_DCDC_GLOBAL_CFG); - if (ret) - goto err; - - if (enable) - temp |= SMARTREFLEX_ENABLE; - else - temp &= ~SMARTREFLEX_ENABLE; - - ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp, - TWL4030_DCDC_GLOBAL_CFG); - if (!ret) { - twl_sr_enable_autoinit = true; - return 0; - } -err: - pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret); - return ret; -} diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index c3b73351cb7a..90c88d498485 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -226,6 +226,14 @@ static void __init am3517_evm_legacy_init(void) am35xx_emac_reset(); } +static struct platform_device omap3_rom_rng_device = { + .name = "omap3-rom-rng", + .id = -1, + .dev = { + .platform_data = rx51_secure_rng_call, + }, +}; + static void __init nokia_n900_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -239,6 +247,10 @@ static void __init nokia_n900_legacy_init(void) pr_warning("RX-51: Not enabling ARM errata 430973 workaround\n"); pr_warning("Thumb binaries may crash randomly without this workaround\n"); } + + pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + platform_device_register(&omap3_rom_rng_device); + } } #endif /* CONFIG_ARCH_OMAP3 */ @@ -254,6 +266,11 @@ static void __init omap4_panda_legacy_init(void) { legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); } + +static void __init var_som_om44_legacy_init(void) +{ + legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 41); +} #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) @@ -364,6 +381,8 @@ static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP4 { "ti,omap4-sdp", omap4_sdp_legacy_init, }, { "ti,omap4-panda", omap4_panda_legacy_init, }, + { "variscite,var-dvk-om44", var_som_om44_legacy_init, }, + { "variscite,var-stk-om44", var_som_om44_legacy_init, }, #endif #ifdef CONFIG_SOC_AM33XX { "ti,am335x-evmsk", am335x_evmsk_legacy_init, }, diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e1b41416fbf1..828aee9ea6a8 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -32,11 +32,13 @@ #include "pm.h" #include "twl-common.h" +#ifdef CONFIG_SUSPEND /* * omap_pm_suspend: points to a function that does the SoC-specific * suspend work */ -int (*omap_pm_suspend)(void); +static int (*omap_pm_suspend)(void); +#endif #ifdef CONFIG_PM /** @@ -243,6 +245,15 @@ static const struct platform_suspend_ops omap_pm_ops = { .valid = suspend_valid_only_mem, }; +/** + * omap_common_suspend_init - Set common suspend routines for OMAP SoCs + * @pm_suspend: function pointer to SoC specific suspend function + */ +void omap_common_suspend_init(void *pm_suspend) +{ + omap_pm_suspend = pm_suspend; + suspend_set_ops(&omap_pm_ops); +} #endif /* CONFIG_SUSPEND */ static void __init omap3_init_voltages(void) @@ -287,32 +298,24 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { - /* - * In the case of DT, the PMIC and SR initialization will be done using - * a completely different mechanism. - * Disable this part if a DT blob is available. - */ - if (!of_have_populated_dt()) { - - /* Init the voltage layer */ - omap_pmic_late_init(); - omap_voltage_late_init(); + if (of_have_populated_dt()) { + omap3_twl_init(); + omap4_twl_init(); + } - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); + /* Init the voltage layer */ + omap_pmic_late_init(); + omap_voltage_late_init(); - /* Smartreflex device init */ - omap_devinit_smartreflex(); + /* Initialize the voltages */ + omap3_init_voltages(); + omap4_init_voltages(); - } + /* Smartreflex device init */ + omap_devinit_smartreflex(); /* cpufreq dummy device instantiation */ omap_init_cpufreq(); -#ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif - return 0; } diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index d4d0fce325c7..e150102d6c06 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -34,7 +34,6 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); -extern int (*omap_pm_suspend)(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); @@ -147,4 +146,11 @@ static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = * static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { } #endif +#ifdef CONFIG_SUSPEND +void omap_common_suspend_init(void *pm_suspend); +#else +static inline void omap_common_suspend_init(void *pm_suspend) +{ +} +#endif /* CONFIG_SUSPEND */ #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8c0759496c8d..a5ea988ff340 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -229,9 +229,7 @@ static void __init prcm_setup_regs(void) clkdm_for_each(omap_pm_clkdms_setup, NULL); clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap2_enter_full_retention; -#endif + omap_common_suspend_init(omap2_enter_full_retention); /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk * stabilisation */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 87099bb6de69..507d8eeaab95 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -50,6 +50,7 @@ #include "sdrc.h" #include "sram.h" #include "control.h" +#include "vc.h" /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -288,6 +289,9 @@ void omap_sram_idle(void) } } + /* Configure PMIC signaling for I2C4 or sys_off_mode */ + omap3_vc_set_pmic_signaling(core_next_state); + omap3_intc_prepare_idle(); /* @@ -391,7 +395,8 @@ restore: return ret; } - +#else +#define omap3_pm_suspend NULL #endif /* CONFIG_SUSPEND */ @@ -705,9 +710,7 @@ int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); wkup_clkdm = clkdm_lookup("wkup_clkdm"); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap3_pm_suspend; -#endif + omap_common_suspend_init(omap3_pm_suspend); arm_pm_idle = omap3_pm_idle; omap3_idle_init(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index eefb30cfcabd..0dda6cf8b855 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -96,6 +96,8 @@ static int omap4_pm_suspend(void) return 0; } +#else +#define omap4_pm_suspend NULL #endif /* CONFIG_SUSPEND */ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) @@ -251,9 +253,7 @@ int __init omap4_pm_init(void) (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap4_pm_suspend; -#endif + omap_common_suspend_init(omap4_pm_suspend); /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c index c0aeabfcf009..c40e5f009826 100644 --- a/arch/arm/mach-omap2/powerdomain-common.c +++ b/arch/arm/mach-omap2/powerdomain-common.c @@ -17,7 +17,6 @@ #include "pm.h" #include "cm.h" #include "cm-regbits-34xx.h" -#include "cm-regbits-44xx.h" #include "prm-regbits-34xx.h" #include "prm-regbits-44xx.h" diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 93a2a6e4260f..faebd5f076af 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -32,6 +32,7 @@ #include "powerdomain.h" #include "clockdomain.h" +#include "voltage.h" #include "soc.h" #include "pm.h" diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index da5a59ae77b6..f4727117f6cc 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -21,8 +21,6 @@ #include <linux/list.h> #include <linux/spinlock.h> -#include "voltage.h" - /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -75,6 +73,7 @@ struct clockdomain; struct powerdomain; +struct voltagedomain; /** * struct powerdomain - OMAP powerdomain diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 0e841fd9498a..a8e4b582c527 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -428,6 +428,28 @@ #define MAX_IOPAD_LATCH_TIME 100 # ifndef __ASSEMBLER__ +#include <linux/delay.h> + +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + /** * struct omap_prcm_irq - describes a PRCM interrupt bit * @name: a short name describing the interrupt type, e.g. "wkup" or "io" @@ -458,6 +480,7 @@ struct omap_prcm_irq { * @ocp_barrier: fn ptr to force buffered PRM writes to complete * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs * @restore_irqen: fn ptr to save and clear IRQENABLE regs + * @reconfigure_io_chain: fn ptr to reconfigure IO chain * @saved_mask: IRQENABLE regs are saved here during suspend * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init @@ -479,6 +502,7 @@ struct omap_prcm_irq_setup { void (*ocp_barrier)(void); void (*save_and_clear_irqen)(u32 *saved_mask); void (*restore_irqen)(u32 *saved_mask); + void (*reconfigure_io_chain)(void); u32 *saved_mask; u32 *priority_mask; int base_irq; diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c index c30e44a7fab0..cdbee6326d29 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.c +++ b/arch/arm/mach-omap2/prcm_mpu44xx.c @@ -30,12 +30,12 @@ void __iomem *prcm_mpu_base; u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + return readl_relaxed(OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); + writel_relaxed(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg)); } u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 059bd4f49035..ac9cb4550239 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -26,7 +26,6 @@ #define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H #include "prcm_mpu_44xx_54xx.h" -#include "common.h" #define OMAP4430_PRCM_MPU_BASE 0x48243000 diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index cebad565ed37..106132db532b 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -123,8 +123,15 @@ #define OMAP3430_GLOBAL_SW_RST_SHIFT 1 #define OMAP3430_GLOBAL_COLD_RST_SHIFT 0 #define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) -#define OMAP3430_SEL_OFF_MASK (1 << 3) -#define OMAP3430_AUTO_OFF_MASK (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_SEL_VMODE (1 << 4) +#define OMAP3430_PRM_VOLTCTRL_SEL_OFF (1 << 3) +#define OMAP3430_PRM_VOLTCTRL_AUTO_OFF (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_AUTO_RET (1 << 1) +#define OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP (1 << 0) #define OMAP3430_SETUP_TIME2_MASK (0xffff << 16) #define OMAP3430_SETUP_TIME1_MASK (0xffff << 0) +#define OMAP3430_PRM_POLCTRL_OFFMODE_POL (1 << 3) +#define OMAP3430_PRM_POLCTRL_CLKOUT_POL (1 << 2) +#define OMAP3430_PRM_POLCTRL_CLKREQ_POL (1 << 1) +#define OMAP3430_PRM_POLCTRL_EXTVOL_POL (1 << 0) #endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index 623db40fdbbd..48480d557b61 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -17,10 +17,18 @@ # ifndef __ASSEMBLER__ extern void __iomem *prm_base; +extern u16 prm_features; extern void omap2_set_globals_prm(void __iomem *prm); int of_prcm_init(void); # endif +/* + * prm_features flag values + * + * PRM_HAS_IO_WAKEUP: has IO wakeup capability + * PRM_HAS_VOLTAGE: has voltage domains + */ +#define PRM_HAS_IO_WAKEUP (1 << 0) /* * MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP @@ -118,6 +126,7 @@ struct prm_reset_src_map { * @read_reset_sources: ptr to the SoC PRM-specific get_reset_source impl * @was_any_context_lost_old: ptr to the SoC PRM context loss test fn * @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn + * @late_init: ptr to the late init function * * XXX @was_any_context_lost_old and @clear_context_loss_flags_old are * deprecated. @@ -126,6 +135,7 @@ struct prm_ll_data { u32 (*read_reset_sources)(void); bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx); void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx); + int (*late_init)(void); }; extern int prm_register(struct prm_ll_data *pld); diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c index 418de9c3b319..a3a3cca2bcc4 100644 --- a/arch/arm/mach-omap2/prm2xxx.c +++ b/arch/arm/mach-omap2/prm2xxx.c @@ -18,9 +18,6 @@ #include <linux/io.h> #include <linux/irq.h> -#include "soc.h" -#include "common.h" -#include "vp.h" #include "powerdomain.h" #include "clockdomain.h" #include "prm2xxx.h" @@ -201,19 +198,11 @@ static struct prm_ll_data omap2xxx_prm_ll_data = { int __init omap2xxx_prm_init(void) { - if (!cpu_is_omap24xx()) - return 0; - return prm_register(&omap2xxx_prm_ll_data); } static void __exit omap2xxx_prm_exit(void) { - if (!cpu_is_omap24xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap2xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap2xxx_prm_ll_data); } __exitcall(omap2xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm2xxx.h b/arch/arm/mach-omap2/prm2xxx.h index 3194dd87e0e4..d2cb6365716f 100644 --- a/arch/arm/mach-omap2/prm2xxx.h +++ b/arch/arm/mach-omap2/prm2xxx.h @@ -27,7 +27,7 @@ /* * OMAP2-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 947f6adfed0c..c13b4e293ffa 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -16,7 +16,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm2xxx_3xxx.h" #include "prm-regbits-24xx.h" diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 9624b40836d4..1a3a96392b97 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -55,12 +55,12 @@ /* Power/reset management domain register get/set */ static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) { - return __raw_readl(prm_base + module + idx); + return readl_relaxed(prm_base + module + idx); } static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) { - __raw_writel(val, prm_base + module + idx); + writel_relaxed(val, prm_base + module + idx); } /* Read-modify-write a register in a PRM module. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm33xx.c b/arch/arm/mach-omap2/prm33xx.c index 720440737744..62709cd2f9c5 100644 --- a/arch/arm/mach-omap2/prm33xx.c +++ b/arch/arm/mach-omap2/prm33xx.c @@ -19,7 +19,6 @@ #include <linux/err.h> #include <linux/io.h> -#include "common.h" #include "powerdomain.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" @@ -27,13 +26,13 @@ /* Read a register in a PRM instance */ u32 am33xx_prm_read_reg(s16 inst, u16 idx) { - return __raw_readl(prm_base + inst + idx); + return readl_relaxed(prm_base + inst + idx); } /* Write into a register in a PRM instance */ void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx) { - __raw_writel(val, prm_base + inst + idx); + writel_relaxed(val, prm_base + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 7721990d2006..4bd7a2dca8af 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -43,6 +43,7 @@ static struct omap_prcm_irq_setup omap3_prcm_irq_setup = { .ocp_barrier = &omap3xxx_prm_ocp_barrier, .save_and_clear_irqen = &omap3xxx_prm_save_and_clear_irqen, .restore_irqen = &omap3xxx_prm_restore_irqen, + .reconfigure_io_chain = &omap3xxx_prm_reconfigure_io_chain, }; /* @@ -246,7 +247,7 @@ void omap3xxx_prm_reconfigure_io_chain(void) */ static void __init omap3xxx_prm_enable_io_wakeup(void) { - if (omap3_has_io_wakeup()) + if (prm_features & PRM_HAS_IO_WAKEUP) omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); } @@ -400,23 +401,26 @@ struct pwrdm_ops omap3_pwrdm_operations = { * */ +static int omap3xxx_prm_late_init(void); + static struct prm_ll_data omap3xxx_prm_ll_data = { .read_reset_sources = &omap3xxx_prm_read_reset_sources, + .late_init = &omap3xxx_prm_late_init, }; int __init omap3xxx_prm_init(void) { - if (!cpu_is_omap34xx()) - return 0; + if (omap3_has_io_wakeup()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap3xxx_prm_ll_data); } -static int __init omap3xxx_prm_late_init(void) +static int omap3xxx_prm_late_init(void) { int ret; - if (!cpu_is_omap34xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap3xxx_prm_enable_io_wakeup(); @@ -427,15 +431,9 @@ static int __init omap3xxx_prm_late_init(void) return ret; } -omap_subsys_initcall(omap3xxx_prm_late_init); static void __exit omap3xxx_prm_exit(void) { - if (!cpu_is_omap34xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap3xxx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap3xxx_prm_ll_data); } __exitcall(omap3xxx_prm_exit); diff --git a/arch/arm/mach-omap2/prm3xxx.h b/arch/arm/mach-omap2/prm3xxx.h index f8eb83323b1a..1dacfc5b1959 100644 --- a/arch/arm/mach-omap2/prm3xxx.h +++ b/arch/arm/mach-omap2/prm3xxx.h @@ -26,7 +26,7 @@ /* * OMAP3-specific global PRM registers - * Use __raw_{read,write}l() with these registers. + * Use {read,write}l_relaxed() with these registers. * * With a few exceptions, these are the register names beginning with * PRM_* on 34xx. (The exceptions are the IRQSTATUS and IRQENABLE diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 03a603476cfc..a7f6ea27180a 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -47,6 +47,7 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = { .ocp_barrier = &omap44xx_prm_ocp_barrier, .save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen, .restore_irqen = &omap44xx_prm_restore_irqen, + .reconfigure_io_chain = &omap44xx_prm_reconfigure_io_chain, }; /* @@ -81,13 +82,13 @@ static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = { /* Read a register in a CM/PRM instance in the PRM module */ u32 omap4_prm_read_inst_reg(s16 inst, u16 reg) { - return __raw_readl(prm_base + inst + reg); + return readl_relaxed(prm_base + inst + reg); } /* Write into a register in a CM/PRM instance in the PRM module */ void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg) { - __raw_writel(val, prm_base + inst + reg); + writel_relaxed(val, prm_base + inst + reg); } /* Read-modify-write a register in a PRM module. Caller must lock */ @@ -649,6 +650,8 @@ struct pwrdm_ops omap4_pwrdm_operations = { .pwrdm_has_voltdm = omap4_check_vcvp, }; +static int omap44xx_prm_late_init(void); + /* * XXX document */ @@ -656,34 +659,29 @@ static struct prm_ll_data omap44xx_prm_ll_data = { .read_reset_sources = &omap44xx_prm_read_reset_sources, .was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old, .clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old, + .late_init = &omap44xx_prm_late_init, }; int __init omap44xx_prm_init(void) { - if (!cpu_is_omap44xx() && !soc_is_omap54xx() && !soc_is_dra7xx()) - return 0; + if (cpu_is_omap44xx()) + prm_features |= PRM_HAS_IO_WAKEUP; return prm_register(&omap44xx_prm_ll_data); } -static int __init omap44xx_prm_late_init(void) +static int omap44xx_prm_late_init(void) { - if (!cpu_is_omap44xx()) + if (!(prm_features & PRM_HAS_IO_WAKEUP)) return 0; omap44xx_prm_enable_io_wakeup(); return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup); } -omap_subsys_initcall(omap44xx_prm_late_init); static void __exit omap44xx_prm_exit(void) { - if (!cpu_is_omap44xx()) - return; - - /* Should never happen */ - WARN(prm_unregister(&omap44xx_prm_ll_data), - "%s: prm_ll_data function pointer mismatch\n", __func__); + prm_unregister(&omap44xx_prm_ll_data); } __exitcall(omap44xx_prm_exit); diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index b4c4ab9c8044..25e8b8232115 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -62,6 +62,8 @@ static struct omap_prcm_irq_setup *prcm_irq_setup; /* prm_base: base virtual address of the PRM IP block */ void __iomem *prm_base; +u16 prm_features; + /* * prm_ll_data: function pointers to SoC-specific implementations of * common PRM functions @@ -330,12 +332,7 @@ int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) if (of_have_populated_dt()) { int irq = omap_prcm_event_to_irq("io"); - if (cpu_is_omap34xx()) - omap_pcs_legacy_init(irq, - omap3xxx_prm_reconfigure_io_chain); - else - omap_pcs_legacy_init(irq, - omap44xx_prm_reconfigure_io_chain); + omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); } return 0; @@ -530,3 +527,11 @@ int __init of_prcm_init(void) return 0; } + +static int __init prm_late_init(void) +{ + if (prm_ll_data->late_init) + return prm_ll_data->late_init(); + return 0; +} +subsys_initcall(prm_late_init); diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index 05fcf6de44ee..69f0dd08629c 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -49,7 +49,7 @@ u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - return __raw_readl(_prm_bases[part] + inst + idx); + return readl_relaxed(_prm_bases[part] + inst + idx); } /* Write into a register in a PRM instance */ @@ -58,7 +58,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || part == OMAP4430_INVALID_PRCM_PARTITION || !_prm_bases[part]); - __raw_writel(val, _prm_bases[part] + inst + idx); + writel_relaxed(val, _prm_bases[part] + inst + idx); } /* Read-modify-write a register in PRM. Caller must lock */ diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 446aa13511fd..645a2a46b213 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -31,24 +31,24 @@ extern void __iomem *omap2_sms_base; static inline void sdrc_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SDRC_REGADDR(reg)); + writel_relaxed(val, OMAP_SDRC_REGADDR(reg)); } static inline u32 sdrc_read_reg(u16 reg) { - return __raw_readl(OMAP_SDRC_REGADDR(reg)); + return readl_relaxed(OMAP_SDRC_REGADDR(reg)); } /* SMS global register get/set */ static inline void sms_write_reg(u32 val, u16 reg) { - __raw_writel(val, OMAP_SMS_REGADDR(reg)); + writel_relaxed(val, OMAP_SMS_REGADDR(reg)); } static inline u32 sms_read_reg(u16 reg) { - return __raw_readl(OMAP_SMS_REGADDR(reg)); + return readl_relaxed(OMAP_SMS_REGADDR(reg)); } extern void omap2_set_globals_sdrc(void __iomem *sdrc, void __iomem *sms); diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index 907291714643..ae3f1553158d 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -103,9 +103,9 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force) * prm2xxx.c function */ if (cpu_is_omap2420()) - __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2420_PRCM_VOLTSETUP); else - __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP); + writel_relaxed(0xffff, OMAP2430_PRCM_VOLTSETUP); omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type); curr_perf_level = level; local_irq_restore(flags); diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 30abcc8b20e0..de2a34c423a7 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -459,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) +#define DRA7XX_CLASS 0x07000000 +#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) +#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) + void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); void omap4xxx_check_revision(void); void omap5xxx_check_revision(void); +void dra7xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); void am33xx_check_features(void); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d7bc33f15344..1b91ef0c182a 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -57,7 +57,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, /* * In OMAP4 the efuse registers are 24 bit aligned. - * A __raw_readl will fail for non-32 bit aligned address + * A readl_relaxed will fail for non-32 bit aligned address * and hence the 8-bit read and shift. */ if (cpu_is_omap44xx()) { diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c index 4bd096836235..ddf1818af228 100644 --- a/arch/arm/mach-omap2/sram.c +++ b/arch/arm/mach-omap2/sram.c @@ -70,16 +70,16 @@ static int is_sram_locked(void) if (OMAP2_DEVICE_TYPE_GP == omap_type()) { /* RAMFW: R/W access to all initiators for all qualifier sets */ if (cpu_is_omap242x()) { - __raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */ } if (cpu_is_omap34xx()) { - __raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ - __raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ - __raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ - __raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2); - __raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); + writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */ + writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */ + writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */ + writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2); + writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0); } return 0; } else diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index b62de9f9d05c..43d03fbf4c0b 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -361,7 +361,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, /* Clocksource code */ static struct omap_dm_timer clksrc; -static bool use_gptimer_clksrc; +static bool use_gptimer_clksrc __initdata; /* * clocksource @@ -546,15 +546,15 @@ static void __init realtime_counter_init(void) } /* Program numerator and denumerator registers */ - reg = __raw_readl(base + INCREMENTER_NUMERATOR_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= num; - __raw_writel(reg, base + INCREMENTER_NUMERATOR_OFFSET); + writel_relaxed(reg, base + INCREMENTER_NUMERATOR_OFFSET); - reg = __raw_readl(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & + reg = readl_relaxed(base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET) & NUMERATOR_DENUMERATOR_MASK; reg |= den; - __raw_writel(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); + writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); arch_timer_freq = (rate / den) * num; set_cntfreq(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 10855eb4ccc1..745367c0c2bb 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -28,7 +28,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/usb/phy.h> -#include <linux/usb/usb_phy_gen_xceiv.h> +#include <linux/usb/usb_phy_generic.h> #include "soc.h" #include "omap_device.h" @@ -349,7 +349,7 @@ static struct fixed_voltage_config hsusb_reg_config = { /* .init_data filled later */ }; -static const char *nop_name = "usb_phy_gen_xceiv"; /* NOP PHY driver */ +static const char *nop_name = "usb_phy_generic"; /* NOP PHY driver */ static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ /** @@ -435,7 +435,7 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) struct platform_device *pdev; char *phy_id; struct platform_device_info pdevinfo; - struct usb_phy_gen_xceiv_platform_data nop_pdata; + struct usb_phy_generic_platform_data nop_pdata; for (i = 0; i < num_phys; i++) { @@ -469,8 +469,8 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) pdevinfo.id = phy->port; pdevinfo.data = &nop_pdata; pdevinfo.size_data = - sizeof(struct usb_phy_gen_xceiv_platform_data); - scnprintf(phy_id, MAX_STR, "usb_phy_gen_xceiv.%d", + sizeof(struct usb_phy_generic_platform_data); + scnprintf(phy_id, MAX_STR, "usb_phy_generic.%d", phy->port); pdev = platform_device_register_full(&pdevinfo); if (IS_ERR(pdev)) { diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 49ac7977e03e..a4628a9e760c 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -220,10 +220,126 @@ static inline u32 omap_usec_to_32k(u32 usec) return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL); } -/* Set oscillator setup time for omap3 */ -static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) +struct omap3_vc_timings { + u32 voltsetup1; + u32 voltsetup2; +}; + +struct omap3_vc { + struct voltagedomain *vd; + u32 voltctrl; + u32 voltsetup1; + u32 voltsetup2; + struct omap3_vc_timings timings[2]; +}; +static struct omap3_vc vc; + +void omap3_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + struct omap3_vc_timings *c = vc.timings; + u32 voltctrl, voltsetup1, voltsetup2; + + voltctrl = vc.voltctrl; + voltsetup1 = vc.voltsetup1; + voltsetup2 = vc.voltsetup2; + + switch (core_next_state) { + case PWRDM_POWER_OFF: + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_RET | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_OFF; + if (voltctrl & OMAP3430_PRM_VOLTCTRL_SEL_OFF) + voltsetup2 = c->voltsetup2; + else + voltsetup1 = c->voltsetup1; + break; + case PWRDM_POWER_RET: + default: + c++; + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_OFF | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_RET; + voltsetup1 = c->voltsetup1; + break; + } + + if (voltctrl != vc.voltctrl) { + vd->write(voltctrl, OMAP3_PRM_VOLTCTRL_OFFSET); + vc.voltctrl = voltctrl; + } + if (voltsetup1 != vc.voltsetup1) { + vd->write(c->voltsetup1, + OMAP3_PRM_VOLTSETUP1_OFFSET); + vc.voltsetup1 = voltsetup1; + } + if (voltsetup2 != vc.voltsetup2) { + vd->write(c->voltsetup2, + OMAP3_PRM_VOLTSETUP2_OFFSET); + vc.voltsetup2 = voltsetup2; + } +} + +#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ + OMAP3430_PRM_POLCTRL_CLKREQ_POL) +#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL + +/* + * Configure signal polarity for sys_clkreq and sys_off_mode pins + * as the default values are wrong and can cause the system to hang + * if any twl4030 scripts are loaded. + */ +static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + u32 val; + + if (vc.vd) + return; + + vc.vd = voltdm; + + val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET); + if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) || + (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) { + val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL; + val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL; + pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_POLCTRL_OFFSET); + } + + /* + * By default let's use I2C4 signaling for retention idle + * and sys_off_mode pin signaling for off idle. This way we + * have sys_clk_req pin go down for retention and both + * sys_clk_req and sys_off_mode pins will go down for off + * idle. And we can also scale voltages to zero for off-idle. + * Note that no actual voltage scaling during off-idle will + * happen unless the board specific twl4030 PMIC scripts are + * loaded. + */ + val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); + if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) { + val |= OMAP3430_PRM_VOLTCTRL_SEL_OFF; + pr_debug("PM: setting voltctrl sys_off_mode signaling to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_VOLTCTRL_OFFSET); + } + vc.voltctrl = val; + + omap3_vc_set_pmic_signaling(PWRDM_POWER_ON); +} + +static void omap3_init_voltsetup1(struct voltagedomain *voltdm, + struct omap3_vc_timings *c, u32 idle) { - voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET); + unsigned long val; + + val = (voltdm->vc_param->on - idle) / voltdm->pmic->slew_rate; + val *= voltdm->sys_clk.rate / 8 / 1000000 + 1; + val <<= __ffs(voltdm->vfsm->voltsetup_mask); + c->voltsetup1 &= ~voltdm->vfsm->voltsetup_mask; + c->voltsetup1 |= val; } /** @@ -236,37 +352,21 @@ static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) * or retention. Off mode has additionally an option to use sys_off_mode * pad, which uses a global signal to program the whole power IC to * off-mode. + * + * Note that pmic is not controlling the voltage scaling during + * retention signaled over I2C4, so we can keep voltsetup2 as 0. + * And the oscillator is not shut off over I2C4, so no need to + * set clksetup. */ -static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) +static void omap3_set_i2c_timings(struct voltagedomain *voltdm) { - unsigned long voltsetup1; - u32 tgt_volt; - - /* - * Oscillator is shut down only if we are using sys_off_mode pad, - * thus we set a minimal setup time here - */ - omap3_set_clksetup(1, voltdm); + struct omap3_vc_timings *c = vc.timings; - if (off_mode) - tgt_volt = voltdm->vc_param->off; - else - tgt_volt = voltdm->vc_param->ret; - - voltsetup1 = (voltdm->vc_param->on - tgt_volt) / - voltdm->pmic->slew_rate; - - voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1; - - voltdm->rmw(voltdm->vfsm->voltsetup_mask, - voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask), - voltdm->vfsm->voltsetup_reg); - - /* - * pmic is not controlling the voltage scaling during retention, - * thus set voltsetup2 to 0 - */ - voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET); + /* Configure PRWDM_POWER_OFF over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->off); + c++; + /* Configure PRWDM_POWER_RET over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->ret); } /** @@ -275,69 +375,49 @@ static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) * * Calculates and sets up off-mode timings for a channel. Off-mode * can use either I2C based voltage scaling, or alternatively - * sys_off_mode pad can be used to send a global command to power IC. - * This function first checks which mode is being used, and calls - * omap3_set_i2c_timings() if the system is using I2C control mode. + * sys_off_mode pad can be used to send a global command to power IC.n, * sys_off_mode has the additional benefit that voltages can be * scaled to zero volt level with TWL4030 / TWL5030, I2C can only * scale to 600mV. + * + * Note that omap is not controlling the voltage scaling during + * off idle signaled by sys_off_mode, so we can keep voltsetup1 + * as 0. */ static void omap3_set_off_timings(struct voltagedomain *voltdm) { - unsigned long clksetup; - unsigned long voltsetup2; - unsigned long voltsetup2_old; - u32 val; - u32 tstart, tshut; + struct omap3_vc_timings *c = vc.timings; + u32 tstart, tshut, clksetup, voltoffset; - /* check if sys_off_mode is used to control off-mode voltages */ - val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); - if (!(val & OMAP3430_SEL_OFF_MASK)) { - /* No, omap is controlling them over I2C */ - omap3_set_i2c_timings(voltdm, true); + if (c->voltsetup2) return; - } omap_pm_get_oscillator(&tstart, &tshut); - omap3_set_clksetup(tstart, voltdm); - - clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET); - - /* voltsetup 2 in us */ - voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate; - - /* convert to 32k clk cycles */ - voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000); - - voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET); - - /* - * Update voltsetup2 if higher than current value (needed because - * we have multiple channels with different ramp times), also - * update voltoffset always to value recommended by TRM - */ - if (voltsetup2 > voltsetup2_old) { - voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET); - voltdm->write(clksetup - voltsetup2, - OMAP3_PRM_VOLTOFFSET_OFFSET); - } else - voltdm->write(clksetup - voltsetup2_old, - OMAP3_PRM_VOLTOFFSET_OFFSET); + if (tstart == ULONG_MAX) { + pr_debug("PM: oscillator start-up time not initialized, using 10ms\n"); + clksetup = omap_usec_to_32k(10000); + } else { + clksetup = omap_usec_to_32k(tstart); + } /* - * omap is not controlling voltage scaling during off-mode, - * thus set voltsetup1 to 0 + * For twl4030 errata 27, we need to allow minimum ~488.32 us wait to + * switch from HFCLKIN to internal oscillator. That means timings + * have voltoffset fixed to 0xa in rounded up 32 KiHz cycles. And + * that means we can calculate the value based on the oscillator + * start-up time since voltoffset2 = clksetup - voltoffset. */ - voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0, - voltdm->vfsm->voltsetup_reg); - - /* voltoffset must be clksetup minus voltsetup2 according to TRM */ - voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltoffset = omap_usec_to_32k(488); + c->voltsetup2 = clksetup - voltoffset; + voltdm->write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(voltoffset, OMAP3_PRM_VOLTOFFSET_OFFSET); } static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) { + omap3_vc_init_pmic_signaling(voltdm); omap3_set_off_timings(voltdm); + omap3_set_i2c_timings(voltdm); } /** @@ -462,7 +542,7 @@ static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode) val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT, OMAP4_DOWNTIME_MASK); - __raw_writel(val, OMAP4_SCRM_CLKSETUPTIME); + writel_relaxed(val, OMAP4_SCRM_CLKSETUPTIME); } /* OMAP4 specific voltage init functions */ @@ -584,7 +664,7 @@ static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm) val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29; /* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */ - __raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + + writel_relaxed(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP + OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2)); /* HSSCLH can always be zero */ diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 91c8d75bf2ea..cdbdd78e755e 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,6 +117,9 @@ extern struct omap_vc_param omap4_mpu_vc_data; extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; +void omap3_vc_set_pmic_signaling(int core_next_state); + + void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index d15c7bbab8e2..97d6607d447a 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -49,12 +49,12 @@ int omap2_wd_timer_disable(struct omap_hwmod *oh) } /* sequence required to disable watchdog */ - __raw_writel(0xAAAA, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0xAAAA, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); - __raw_writel(0x5555, base + OMAP_WDT_SPR); - while (__raw_readl(base + OMAP_WDT_WPS) & 0x10) + writel_relaxed(0x5555, base + OMAP_WDT_SPR); + while (readl_relaxed(base + OMAP_WDT_WPS) & 0x10) cpu_relax(); return 0; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 14f2cae4109c..2412efb6cdd9 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,6 +5,11 @@ menu "Orion Implementations" config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" select USE_OF + select ORION_CLK + select ORION_IRQCHIP + select ORION_TIMER + select PINCTRL + select PINCTRL_ORION help Say 'Y' here if you want your kernel to support the Marvell Orion5x using flattened device tree. @@ -23,6 +28,14 @@ config MACH_RD88F5182 Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 +config MACH_RD88F5182_DT + bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" + select ARCH_ORION5X_DT + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the Marvell + Orion-NAS (88F5182) RD2, Flattened Device Tree. + config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO @@ -102,28 +115,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2_DT - bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" - select I2C_BOARDINFO +config MACH_D2NET_DT + bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2 (Flattened Device Tree). - -config MACH_D2NET - bool "LaCie d2 Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the LaCie d2 Network NAS. -config MACH_BIGDISK - bool "LaCie Big Disk Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - LaCie Big Disk Network NAS. - config MACH_NET2BIG bool "LaCie 2Big Network" select I2C_BOARDINFO @@ -131,8 +129,9 @@ config MACH_NET2BIG Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. -config MACH_MSS2 - bool "Maxtor Shared Storage II" +config MACH_MSS2_DT + bool "Maxtor Shared Storage II (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 45da805fb236..a40b5c9a58c4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_D2NET) += d2net-setup.o -obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o -obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o @@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o -obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o +obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o +obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o +obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c new file mode 100644 index 000000000000..8a7284124153 --- /dev/null +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-orion5x/board-d2net.c + * + * LaCie d2Network and Big Disk Network NAS setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <plat/orion-gpio.h> +#include "common.h" + +/***************************************************************************** + * LaCie d2 Network Info + ****************************************************************************/ + +/***************************************************************************** + * GPIO LED's + ****************************************************************************/ + +/* + * The blue front LED is wired to the CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * led_off | blink_ctrl | SATA active | LED state + * | | | + * 1 | x | x | off + * 0 | 0 | 0 | off + * 0 | 1 | 0 | blink (rate 300ms) + * 0 | x | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Red LED have priority. + */ + +#define D2NET_GPIO_RED_LED 6 +#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 +#define D2NET_GPIO_BLUE_LED_OFF 23 + +static struct gpio_led d2net_leds[] = { + { + .name = "d2net:blue:sata", + .default_trigger = "default-on", + .gpio = D2NET_GPIO_BLUE_LED_OFF, + .active_low = 1, + }, + { + .name = "d2net:red:fail", + .gpio = D2NET_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_led_data = { + .num_leds = ARRAY_SIZE(d2net_leds), + .leds = d2net_leds, +}; + +static struct platform_device d2net_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_led_data, + }, +}; + +static void __init d2net_gpio_leds_init(void) +{ + int err; + + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); + + platform_device_register(&d2net_gpio_leds); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +void __init d2net_init(void) +{ + d2net_gpio_leds_init(); + + pr_notice("d2net: Flash write are not yet supported.\n"); +} diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index c134a826070a..35d418faf8f1 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -15,10 +15,16 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/cpu.h> +#include <linux/mbus.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> +#include <plat/time.h> #include "common.h" static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { @@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + BUG_ON(mvebu_mbus_dt_init()); + /* * Setup Orion address map */ orion5x_setup_wins(); - /* Setup root of clk tree */ - clk_init(); - /* * Don't issue "Wait for Interrupt" instruction if we are * running on D0 5281 silicon. @@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void) cpu_idle_poll_ctrl(true); } - if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) - edmini_v2_init(); + if (of_machine_is_compatible("maxtor,shared-storage-2")) + mss2_init(); of_platform_populate(NULL, of_default_bus_match_table, orion5x_auxdata_lookup, NULL); @@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = { DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion_dt_init_irq, - .init_time = orion5x_timer_init, .init_machine = orion5x_dt_init, .restart = orion5x_restart, .dt_compat = orion5x_dt_compat, diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c new file mode 100644 index 000000000000..66f9c3ba86cc --- /dev/null +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -0,0 +1,90 @@ +/* + * Maxtor Shared Storage II Board Setup + * + * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <mach/bridge-regs.h> +#include "common.h" + +/***************************************************************************** + * Maxtor Shared Storage II Info + ****************************************************************************/ + +/**************************************************************************** + * PCI setup + ****************************************************************************/ +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + return -1; +} + +static struct hw_pci mss2_pci __initdata = { + .nr_controllers = 2, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = mss2_pci_map_irq, +}; + +static int __init mss2_pci_init(void) +{ + if (machine_is_mss2()) + pci_common_init(&mss2_pci); + + return 0; +} +subsys_initcall(mss2_pci_init); + +/***************************************************************************** + * MSS2 power off method + ****************************************************************************/ +/* + * On the Maxtor Shared Storage II, the shutdown process is the following : + * - Userland modifies U-boot env to tell U-boot to go idle at next boot + * - The board reboots + * - U-boot starts and go into an idle mode until the user press "power" + */ +static void mss2_power_off(void) +{ + u32 reg; + + /* + * Enable and issue soft reset + */ + reg = readl(RSTOUTn_MASK); + reg |= 1 << 2; + writel(reg, RSTOUTn_MASK); + + reg = readl(CPU_SOFT_RESET); + reg |= 1; + writel(reg, CPU_SOFT_RESET); +} + +void __init mss2_init(void) +{ + /* register mss2 specific power-off method */ + pm_power_off = mss2_power_off; +} diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c new file mode 100644 index 000000000000..270824b0e50f --- /dev/null +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (of_machine_is_compatible("marvell,rd-88f5182-nas")) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index ca3803017c59..cd0389c6e822 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -64,16 +64,15 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_EDMINI_V2_DT -void edmini_v2_init(void); -#else -static inline void edmini_v2_init(void) {}; -#endif - struct tag; extern void __init tag_fixup_mem32(struct tag *, char **); +#ifdef CONFIG_MACH_MSS2_DT +extern void mss2_init(void); +#else +static inline void mss2_init(void) {} +#endif + /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c deleted file mode 100644 index 8f68b745c1d5..000000000000 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * arch/arm/mach-orion5x/d2net-setup.c - * - * LaCie d2Network and Big Disk Network NAS setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <plat/orion-gpio.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * LaCie d2 Network Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define D2NET_NOR_BOOT_BASE 0xfff80000 -#define D2NET_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on Boot Device - ****************************************************************************/ - -/* - * TODO: Check write support on flash MX29LV400CBTC-70G - */ - -static struct mtd_partition d2net_partitions[] = { - { - .name = "Full512kb", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data d2net_nor_flash_data = { - .width = 1, - .parts = d2net_partitions, - .nr_parts = ARRAY_SIZE(d2net_partitions), -}; - -static struct resource d2net_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = D2NET_NOR_BOOT_BASE, - .end = D2NET_NOR_BOOT_BASE - + D2NET_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device d2net_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &d2net_nor_flash_data, - }, - .num_resources = 1, - .resource = &d2net_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -/* - * i2c addr | chip | description - * 0x32 | Ricoh 5C372b | RTC - * 0x3e | GMT G762 | PWM fan controller - * 0x50 | HT24LC08 | eeprom (1kB) - * - * TODO: Add G762 support to the g760a driver. - */ -static struct i2c_board_info __initdata d2net_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, { - I2C_BOARD_INFO("24c08", 0x50), - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_sata_data = { - .n_ports = 2, -}; - -#define D2NET_GPIO_SATA0_POWER 3 -#define D2NET_GPIO_SATA1_POWER 12 - -static void __init d2net_sata_power_init(void) -{ - int err; - - err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA0_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA0 power GPIO\n"); - - err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA1_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA1 power GPIO\n"); -} - -/***************************************************************************** - * GPIO LED's - ****************************************************************************/ - -/* - * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * led_off | blink_ctrl | SATA active | LED state - * | | | - * 1 | x | x | off - * 0 | 0 | 0 | off - * 0 | 1 | 0 | blink (rate 300ms) - * 0 | x | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Red LED have priority. - */ - -#define D2NET_GPIO_RED_LED 6 -#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 -#define D2NET_GPIO_BLUE_LED_OFF 23 - -static struct gpio_led d2net_leds[] = { - { - .name = "d2net:blue:sata", - .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, - }, - { - .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_led_data = { - .num_leds = ARRAY_SIZE(d2net_leds), - .leds = d2net_leds, -}; - -static struct platform_device d2net_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_led_data, - }, -}; - -static void __init d2net_gpio_leds_init(void) -{ - int err; - - /* Configure GPIO over MPP max number. */ - orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - - /* Configure register blink_ctrl to allow SATA activity LED blinking. */ - err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); - if (err) - gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); - } - if (err) - pr_err("d2net: failed to configure blue LED blink GPIO\n"); - - platform_device_register(&d2net_gpio_leds); -} - -/**************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_GPIO_PUSH_BUTTON 18 -#define D2NET_GPIO_POWER_SWITCH_ON 8 -#define D2NET_GPIO_POWER_SWITCH_OFF 9 - -#define D2NET_SWITCH_POWER_ON 0x1 -#define D2NET_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_buttons[] = { - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_OFF, - .gpio = D2NET_GPIO_POWER_SWITCH_OFF, - .desc = "Power rocker switch (auto|off)", - .active_low = 0, - }, - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_ON, - .gpio = D2NET_GPIO_POWER_SWITCH_ON, - .desc = "Power rocker switch (on|auto)", - .active_low = 0, - }, - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = D2NET_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data d2net_button_data = { - .buttons = d2net_buttons, - .nbuttons = ARRAY_SIZE(d2net_buttons), -}; - -static struct platform_device d2net_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_mpp_modes[] __initdata = { - MPP0_GPIO, /* Board ID (bit 0) */ - MPP1_GPIO, /* Board ID (bit 1) */ - MPP2_GPIO, /* Board ID (bit 2) */ - MPP3_GPIO, /* SATA 0 power */ - MPP4_UNUSED, - MPP5_GPIO, /* Fan fail detection */ - MPP6_GPIO, /* Red front LED */ - MPP7_UNUSED, - MPP8_GPIO, /* Rear power switch (on|auto) */ - MPP9_GPIO, /* Rear power switch (auto|off) */ - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_GPIO, /* SATA 1 power */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_GPIO, /* Blue front LED blink control */ - MPP17_UNUSED, - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ - MPP19_UNUSED, - 0, - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ - /* 23: Blue front LED off */ - /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ -}; - -#define D2NET_GPIO_INHIBIT_POWER_OFF 24 - -static void __init d2net_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(d2net_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&d2net_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - d2net_sata_power_init(); - orion5x_sata_init(&d2net_sata_data); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); - platform_device_register(&d2net_nor_flash); - - platform_device_register(&d2net_gpio_buttons); - - d2net_gpio_leds_init(); - - pr_notice("d2net: Flash write are not yet supported.\n"); - - i2c_register_board_info(0, d2net_i2c_devices, - ARRAY_SIZE(d2net_i2c_devices)); - - orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ - -#ifdef CONFIG_MACH_D2NET -MACHINE_START(D2NET, "LaCie d2 Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_BIGDISK -MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c deleted file mode 100644 index f66c1b2ee8c1..000000000000 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * arch/arm/mach-orion5x/edmini_v2-setup.c - * - * LaCie Ethernet Disk mini V2 Setup - * - * Copyright (C) 2008 Christopher Moore <moore@free.fr> - * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* - * TODO: add Orion USB device port init when kernel.org support is added. - * TODO: add flash write support: see below. - * TODO: add power-off support. - * TODO: add I2C EEPROM support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mbus.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * EDMINI_V2 Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000 -#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on BOOT Device - ****************************************************************************/ - -/* - * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom - * -type device. This could cause risks of accidentally erasing critical - * flash sectors. We thus define a single, write-protected partition covering - * the whole flash. - * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD - * code, break this into at least three partitions: 'u-boot code', 'u-boot - * environment' and 'whatever is left'. - */ - -static struct mtd_partition edmini_v2_partitions[] = { - { - .name = "Full512kb", - .size = 0x00080000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data edmini_v2_nor_flash_data = { - .width = 1, - .parts = edmini_v2_partitions, - .nr_parts = ARRAY_SIZE(edmini_v2_partitions), -}; - -static struct resource edmini_v2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = EDMINI_V2_NOR_BOOT_BASE, - .end = EDMINI_V2_NOR_BOOT_BASE - + EDMINI_V2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device edmini_v2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edmini_v2_nor_flash_data, - }, - .num_resources = 1, - .resource = &edmini_v2_nor_flash_resource, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define EDMINIV2_RTC_GPIO 3 - -static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), - .irq = 0, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int edminiv2_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - /* 16: Power LED control (0 = On, 1 = Off) */ - MPP16_GPIO, - /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - MPP17_GPIO, - /* 18: Power button status (0 = Released, 1 = Pressed) */ - MPP18_GPIO, - MPP19_UNUSED, - 0, -}; - -void __init edmini_v2_init(void) -{ - orion5x_mpp_conf(edminiv2_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); - platform_device_register(&edmini_v2_nor_flash); - - pr_notice("edmini_v2: USB device port, flash write and power-off " - "are not yet supported.\n"); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0) - edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO); - else - gpio_free(EDMINIV2_RTC_GPIO); - } - - if (edmini_v2_i2c_rtc.irq == 0) - pr_warning("edmini_v2: failed to get RTC IRQ\n"); - - i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); -} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 9654b0cc5892..cd4bac4d7e43 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -16,6 +16,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include <asm/exception.h> #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +asmlinkage void +__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(MAIN_IRQ_CAUSE); + stat &= readl_relaxed(MAIN_IRQ_MASK); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init orion5x_init_irq(void) { orion_irq_init(0, MAIN_IRQ_MASK); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(orion5x_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-31. */ diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c deleted file mode 100644 index e105130ba51c..000000000000 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Maxtor Shared Storage II Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> -#include "common.h" -#include "mpp.h" - -#define MSS2_NOR_BOOT_BASE 0xff800000 -#define MSS2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * Maxtor Shared Storage II Info - ****************************************************************************/ - -/* - * Maxtor Shared Storage II hardware : - * - Marvell 88F5182-A2 C500 - * - Marvell 88E1111 Gigabit Ethernet PHY - * - RTC M41T81 (@0x68) on I2C bus - * - 256KB NOR flash - * - 64MB of RAM - */ - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data mss2_nor_flash_data = { - .width = 1, -}; - -static struct resource mss2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MSS2_NOR_BOOT_BASE, - .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mss2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mss2_nor_flash_data, - }, - .resource = &mss2_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * PCI setup - ****************************************************************************/ -static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci mss2_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = mss2_pci_map_irq, -}; - -static int __init mss2_pci_init(void) -{ - if (machine_is_mss2()) - pci_common_init(&mss2_pci); - - return 0; -} -subsys_initcall(mss2_pci_init); - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data mss2_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data mss2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO buttons - ****************************************************************************/ - -#define MSS2_GPIO_KEY_RESET 12 -#define MSS2_GPIO_KEY_POWER 11 - -static struct gpio_keys_button mss2_buttons[] = { - { - .code = KEY_POWER, - .gpio = MSS2_GPIO_KEY_POWER, - .desc = "Power", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = MSS2_GPIO_KEY_RESET, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mss2_button_data = { - .buttons = mss2_buttons, - .nbuttons = ARRAY_SIZE(mss2_buttons), -}; - -static struct platform_device mss2_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mss2_button_data, - }, -}; - -/***************************************************************************** - * RTC m41t81 on I2C bus - ****************************************************************************/ - -#define MSS2_GPIO_RTC_IRQ 3 - -static struct i2c_board_info __initdata mss2_i2c_rtc = { - I2C_BOARD_INFO("m41t81", 0x68), -}; - -/***************************************************************************** - * MSS2 power off method - ****************************************************************************/ -/* - * On the Maxtor Shared Storage II, the shutdown process is the following : - * - Userland modifies U-boot env to tell U-boot to go idle at next boot - * - The board reboots - * - U-boot starts and go into an idle mode until the user press "power" - */ -static void mss2_power_off(void) -{ - u32 reg; - - /* - * Enable and issue soft reset - */ - reg = readl(RSTOUTn_MASK); - reg |= 1 << 2; - writel(reg, RSTOUTn_MASK); - - reg = readl(CPU_SOFT_RESET); - reg |= 1; - writel(reg, CPU_SOFT_RESET); -} - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mss2_mpp_modes[] __initdata = { - MPP0_GPIO, /* Power LED */ - MPP1_GPIO, /* Error LED */ - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* HDD ind. (Single/Dual)*/ - MPP5_GPIO, /* HD0 5V control */ - MPP6_GPIO, /* HD0 12V control */ - MPP7_GPIO, /* HD1 5V control */ - MPP8_GPIO, /* HD1 12V control */ - MPP9_UNUSED, - MPP10_GPIO, /* Fan control */ - MPP11_GPIO, /* Power button */ - MPP12_GPIO, /* Reset button */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init mss2_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mss2_mpp_modes); - - /* - * MPP[20] Unused - * MPP[21] PCI clock - * MPP[22] USB 0 over current - * MPP[23] USB 1 over current - */ - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mss2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mss2_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); - platform_device_register(&mss2_nor_flash); - - platform_device_register(&mss2_button_device); - - if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0) - mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ); - else - gpio_free(MSS2_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mss2_i2c_rtc, 1); - - /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; -} - -MACHINE_START(MSS2, "Maxtor Shared Storage II") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .init_machine = mss2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c index 4887a2a4c698..3dffcb2d714e 100644 --- a/arch/arm/mach-prima2/rstc.c +++ b/arch/arm/mach-prima2/rstc.c @@ -36,27 +36,33 @@ static int sirfsoc_reset_module(struct reset_controller_dev *rcdev, if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) { /* - * Writing 1 to this bit resets corresponding block. Writing 0 to this - * bit de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to this bit resets corresponding block. + * Writing 0 to this bit de-asserts reset signal of the + * corresponding block. datasheet doesn't require explicit + * delay between the set and clear of reset bit. it could + * be shorter if tests pass. */ - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit), + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) | (1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); - msleep(10); - writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit), + msleep(20); + writel(readl(sirfsoc_rstc_base + + (reset_bit / 32) * 4) & ~(1 << reset_bit), sirfsoc_rstc_base + (reset_bit / 32) * 4); } else { /* * For MARCO and POLO - * Writing 1 to SET register resets corresponding block. Writing 1 to CLEAR - * register de-asserts reset signal of the corresponding block. - * datasheet doesn't require explicit delay between the set and clear - * of reset bit. it could be shorter if tests pass. + * Writing 1 to SET register resets corresponding block. + * Writing 1 to CLEAR register de-asserts reset signal of the + * corresponding block. + * datasheet doesn't require explicit delay between the set and + * clear of reset bit. it could be shorter if tests pass. */ - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8); - msleep(10); - writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8); + msleep(20); + writel(1 << reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4); } mutex_unlock(&rstc_lock); diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b19d1c361cab..205f9bf3821e 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -413,7 +413,7 @@ static struct fixed_voltage_config can_regulator_pdata = { static struct platform_device can_regulator_device = { .name = "reg-fixed-volage", - .id = -1, + .id = 0, .dev = { .platform_data = &can_regulator_pdata, }, @@ -510,18 +510,6 @@ struct platform_device zeus_max6369_device = { .num_resources = 1, }; -static struct platform_device *zeus_devices[] __initdata = { - &zeus_serial_device, - &zeus_mtd_devices[0], - &zeus_dm9k0_device, - &zeus_dm9k1_device, - &zeus_sram_device, - &zeus_leds_device, - &zeus_pcmcia_device, - &zeus_max6369_device, - &can_regulator_device, -}; - /* AC'97 */ static pxa2xx_audio_ops_t zeus_ac97_info = { .reset_gpio = 95, @@ -532,44 +520,50 @@ static pxa2xx_audio_ops_t zeus_ac97_info = { * USB host */ -static int zeus_ohci_init(struct device *dev) -{ - int err; - - /* Switch on port 2. */ - if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) { - dev_err(dev, "Can't request USB2_PWREN\n"); - return err; - } - - if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) { - gpio_free(ZEUS_USB2_PWREN_GPIO); - dev_err(dev, "Can't enable USB2_PWREN\n"); - return err; - } +static struct regulator_consumer_supply zeus_ohci_regulator_supplies[] = { + REGULATOR_SUPPLY("vbus2", "pxa27x-ohci"), +}; - /* Port 2 is shared between host and client interface. */ - UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; +static struct regulator_init_data zeus_ohci_regulator_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(zeus_ohci_regulator_supplies), + .consumer_supplies = zeus_ohci_regulator_supplies, +}; - return 0; -} +static struct fixed_voltage_config zeus_ohci_regulator_config = { + .supply_name = "vbus2", + .microvolts = 5000000, /* 5.0V */ + .gpio = ZEUS_USB2_PWREN_GPIO, + .enable_high = 1, + .startup_delay = 0, + .init_data = &zeus_ohci_regulator_data, +}; -static void zeus_ohci_exit(struct device *dev) -{ - /* Power-off port 2 */ - gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0); - gpio_free(ZEUS_USB2_PWREN_GPIO); -} +static struct platform_device zeus_ohci_regulator_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &zeus_ohci_regulator_config, + }, +}; static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, /* Clear Power Control Polarity Low and set Power Sense * Polarity Low. Supply power to USB ports. */ .flags = ENABLE_PORT_ALL | POWER_SENSE_LOW, - .init = zeus_ohci_init, - .exit = zeus_ohci_exit, }; +static void zeus_register_ohci(void) +{ + /* Port 2 is shared between host and client interface. */ + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + pxa_set_ohci_info(&zeus_ohci_platform_data); +} + /* * Flat Panel */ @@ -677,6 +671,19 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { .udc_command = zeus_udc_command, }; +static struct platform_device *zeus_devices[] __initdata = { + &zeus_serial_device, + &zeus_mtd_devices[0], + &zeus_dm9k0_device, + &zeus_dm9k1_device, + &zeus_sram_device, + &zeus_leds_device, + &zeus_pcmcia_device, + &zeus_max6369_device, + &can_regulator_device, + &zeus_ohci_regulator_device, +}; + #ifdef CONFIG_PM static void zeus_power_off(void) { @@ -847,7 +854,7 @@ static void __init zeus_init(void) platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); - pxa_set_ohci_info(&zeus_ohci_platform_data); + zeus_register_ohci(); if (zeus_setup_fb_gpios()) pr_err("Failed to setup fb gpios\n"); diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index a028be234334..fd2b99dceb89 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -2,9 +2,9 @@ config ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC + select ARM_AMBA select CLKSRC_OF - select GENERIC_CLOCKEVENTS - select HAVE_SMP + select PINCTRL select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index bae617ef0b31..c437a9941726 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -15,9 +15,11 @@ #include <asm/mach/arch.h> static const char * const qcom_dt_match[] __initconst = { + "qcom,apq8064", + "qcom,apq8074-dragonboard", + "qcom,apq8084", "qcom,msm8660-surf", "qcom,msm8960-cdp", - "qcom,apq8074-dragonboard", NULL }; diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c2fae3a5aad8..8c1b39a0caa0 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -149,6 +149,21 @@ struct platform_device realview_cf_device = { }, }; +static struct resource realview_leds_resources[] = { + { + .start = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET, + .end = REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device realview_leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(realview_leds_resources), + .resource = realview_leds_resources, +}; + static struct resource realview_i2c_resource = { .start = REALVIEW_I2C_BASE, .end = REALVIEW_I2C_BASE + SZ_4K - 1, diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 844946da3c66..868ece221978 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -37,6 +37,7 @@ struct machine_desc; extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; +extern struct platform_device realview_leds_device; extern struct platform_device realview_i2c_device; extern struct mmci_platform_data realview_mmc0_plat_data; extern struct mmci_platform_data realview_mmc1_plat_data; diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index b575895037b8..739d4f113097 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -457,6 +457,7 @@ static void __init realview_eb_init(void) realview_flash_register(&realview_eb_flash_resource, 1); platform_device_register(&realview_i2c_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); eth_device_register(); realview_usb_register(realview_eb_isp1761_resources); diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index aad9c5a40d47..b0e0dcaed944 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -371,6 +371,7 @@ static void __init realview_pb1176_init(void) realview_usb_register(realview_pb1176_isp1761_resources); platform_device_register(&pmu_device); platform_device_register(&char_lcd_device); + platform_device_register(&realview_leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 101deaf2630b..47bf55fdbf27 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -352,6 +352,7 @@ static void __init realview_pb11mp_init(void) realview_eth_register(NULL, realview_pb11mp_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pb11mp_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 10a3e1d76891..4e57a8599265 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -289,6 +289,7 @@ static void __init realview_pba8_init(void) realview_eth_register(NULL, realview_pba8_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pba8_isp1761_resources); platform_device_register(&pmu_device); diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 535697abfd91..d89eb4023467 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -382,6 +382,7 @@ static void __init realview_pbx_init(void) realview_eth_register(NULL, realview_pbx_smsc911x_resources); platform_device_register(&realview_i2c_device); platform_device_register(&realview_cf_device); + platform_device_register(&realview_leds_device); realview_usb_register(realview_pbx_isp1761_resources); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index e2e7c9dbb200..39bca96b555a 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -18,5 +18,3 @@ extern char rockchip_secondary_trampoline_end; extern unsigned long rockchip_boot_fn; extern void rockchip_secondary_startup(void); - -extern struct smp_operations rockchip_smp_ops; diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 072842f6491b..910835d4ccf4 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -178,7 +178,8 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } -struct smp_operations rockchip_smp_ops __initdata = { +static struct smp_operations rockchip_smp_ops __initdata = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, }; +CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 138b9975313a..968cc348e624 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -35,6 +35,5 @@ static const char * const rockchip_board_dt_compat[] = { DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .smp = smp_ops(rockchip_smp_ops), .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 40cf50b9940c..04284de7aca5 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,6 +18,8 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device + + menu "SAMSUNG S3C24XX SoCs Support" comment "S3C24XX SoCs" @@ -26,8 +28,7 @@ config CPU_S3C2410 bool "SAMSUNG S3C2410" default y select CPU_ARM920T - select CPU_LLSERIAL_S3C2410 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM @@ -39,7 +40,7 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 + select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA select S3C2412_PM if PM help @@ -48,19 +49,16 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" select CPU_ARM926T - select CPU_LLSERIAL_S3C2440 select S3C2416_PM if PM - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2416 SoC from the S3C24XX line config CPU_S3C2440 bool "SAMSUNG S3C2440" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_PM if PM select S3C2440_DMA if S3C24XX_DMA help @@ -69,8 +67,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2410_CLOCK + select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help @@ -84,26 +81,13 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" select CPU_ARM920T - select CPU_LLSERIAL_S3C2440 - select S3C2443_COMMON + select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA - select SAMSUNG_CLKSRC help Support for the S3C2443 SoC from the S3C24XX line # common code -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors which - is currently includes the S3C2410, S3C2440, S3C2442. - -config S3C24XX_DCLK - bool - help - Clock code for supporting DCLK/CLKOUT on S3C24XX architectures - config S3C24XX_SMDK bool help @@ -158,28 +142,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -# low-level serial option nodes - -config CPU_LLSERIAL_S3C2410_ONLY - bool - default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 - -config CPU_LLSERIAL_S3C2440_ONLY - bool - default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 - -config CPU_LLSERIAL_S3C2410 - bool - help - Selected if there is an S3C2410 (or register compatible) serial - low-level implementation needed - -config CPU_LLSERIAL_S3C2440 - bool - help - Selected if there is an S3C2440 (or register compatible) serial - low-level implementation needed - config S3C24XX_PLL bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)" depends on ARM_S3C24XX_CPUFREQ @@ -258,8 +220,8 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ - select S3C24XX_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -340,7 +302,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C24XX_DCLK + select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -519,8 +481,8 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM + select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST help @@ -558,9 +520,9 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 - select S3C24XX_DCLK select S3C24XX_SIMTEC_PM if PM select S3C_DEV_NAND select S3C_DEV_USB_HOST @@ -629,9 +591,9 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 - select S3C24XX_DCLK select S3C24XX_PWM select S3C_DEV_NAND help @@ -641,12 +603,6 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON - bool - help - Common code for the S3C2443 and similar processors, which includes - the S3C2416 and S3C2450. - config S3C2443_DMA bool help diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile index 7f54e5b954ca..2235d0d3b38d 100644 --- a/arch/arm/mach-s3c24xx/Makefile +++ b/arch/arm/mach-s3c24xx/Makefile @@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o -obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o +obj-$(CONFIG_CPU_S3C2416) += s3c2416.o obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o -obj-$(CONFIG_CPU_S3C2443) += s3c2443.o clock-s3c2443.o +obj-$(CONFIG_CPU_S3C2443) += s3c2443.o # PM @@ -44,16 +44,13 @@ obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o # common code -obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o obj-$(CONFIG_S3C24XX_DMA) += dma.o -obj-$(CONFIG_S3C2410_CLOCK) += clock-s3c2410.o obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o obj-$(CONFIG_S3C2410_IOTIMING) += iotiming-s3c2410.o obj-$(CONFIG_S3C2412_IOTIMING) += iotiming-s3c2412.o -obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o # diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c deleted file mode 100644 index 1edd9b2369c5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-dclk.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (c) 2004-2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24XX - definitions for DCLK and CLKOUT registers - */ - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_mpll) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -static struct clk_ops dclk_ops = { - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .ops = &dclk_ops, -}; - -static struct clk_ops clkout_ops = { - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .ops = &clkout_ops, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .ops = &clkout_ops, -}; diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c deleted file mode 100644 index d1afcf9252d1..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2410.c +++ /dev/null @@ -1,284 +0,0 @@ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410,S3C2440,S3C2442 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -int s3c2410_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - /* ensure none of the special function bits set */ - clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER); - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2410_upll_enable(struct clk *clk, int enable) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long orig = clkslow; - - if (enable) - clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF; - else - clkslow |= S3C2410_CLKSLOW_UCLK_OFF; - - __raw_writel(clkslow, S3C2410_CLKSLOW); - - /* if we started the UPLL, then allow to settle */ - - if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF)) - udelay(200); - - return 0; -} - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_SPI, - } -}; - -static struct clk clk_lcd = { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_LCDC, -}; - -static struct clk clk_gpio = { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_GPIO, -}; - -static struct clk clk_usb_host = { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBH, -}; - -static struct clk clk_usb_device = { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_USBD, -}; - -static struct clk clk_timers = { - .name = "timers", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_PWMT, -}; - -struct clk s3c24xx_clk_uart0 = { - .name = "uart", - .devname = "s3c2410-uart.0", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART0, -}; - -struct clk s3c24xx_clk_uart1 = { - .name = "uart", - .devname = "s3c2410-uart.1", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART1, -}; - -struct clk s3c24xx_clk_uart2 = { - .name = "uart", - .devname = "s3c2410-uart.2", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_UART2, -}; - -static struct clk clk_rtc = { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2410_CLKCON_RTC, -}; - -static struct clk clk_watchdog = { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, -}; - -static struct clk clk_usb_bus_host = { - .name = "usb-bus-host", - .parent = &clk_usb_bus, -}; - -static struct clk clk_usb_bus_gadget = { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, -}; - -static struct clk *init_clocks[] = { - &clk_lcd, - &clk_gpio, - &clk_usb_host, - &clk_usb_device, - &clk_timers, - &s3c24xx_clk_uart0, - &s3c24xx_clk_uart1, - &s3c24xx_clk_uart2, - &clk_rtc, - &clk_watchdog, - &clk_usb_bus_host, - &clk_usb_bus_gadget, -}; - -/* s3c2410_baseclk_add() - * - * Add all the clocks used by the s3c2410 or compatible CPUs - * such as the S3C2440 and S3C2442. - * - * We cannot use a system device as we are needed before any - * of the init-calls that initialise the devices are actually - * done. -*/ - -int __init s3c2410_baseclk_add(void) -{ - unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW); - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - struct clk *xtal; - int ret; - int ptr; - - clk_upll.enable = s3c2410_upll_enable; - - if (s3c24xx_register_clock(&clk_usb_bus) < 0) - printk(KERN_ERR "failed to register usb bus clock\n"); - - /* register clocks from clock array */ - - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) { - struct clk *clkp = init_clocks[ptr]; - - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - /* show the clock-slow value */ - - xtal = clk_get(NULL, "xtal"); - - printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n", - print_mhz(clk_get_rate(xtal) / - ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))), - (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast", - (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on", - (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on"); - - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c deleted file mode 100644 index 192a5b2550b0..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ /dev/null @@ -1,760 +0,0 @@ -/* linux/arch/arm/mach-s3c2412/clock.c - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2412,S3C2413 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -static int s3c2412_clkcon_enable(struct clk *clk, int enable) -{ - unsigned int clocks = clk->ctrlbit; - unsigned long clkcon; - - clkcon = __raw_readl(S3C2410_CLKCON); - - if (enable) - clkcon |= clocks; - else - clkcon &= ~clocks; - - __raw_writel(clkcon, S3C2410_CLKCON); - - return 0; -} - -static int s3c2412_upll_enable(struct clk *clk, int enable) -{ - unsigned long upllcon = __raw_readl(S3C2410_UPLLCON); - unsigned long orig = upllcon; - - if (!enable) - upllcon |= S3C2412_PLLCON_OFF; - else - upllcon &= ~S3C2412_PLLCON_OFF; - - __raw_writel(upllcon, S3C2410_UPLLCON); - - /* allow ~150uS for the PLL to settle and lock */ - - if (enable && (orig & S3C2412_PLLCON_OFF)) - udelay(150); - - return 0; -} - -/* clock selections */ - -static struct clk clk_erefclk = { - .name = "erefclk", -}; - -static struct clk clk_urefclk = { - .name = "urefclk", -}; - -static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_urefclk) - clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL; - else if (parent == &clk_upll) - clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_usysclk = { - .name = "usysclk", - .parent = &clk_xtal, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_usysclk, - }, -}; - -static struct clk clk_mrefclk = { - .name = "mrefclk", - .parent = &clk_xtal, -}; - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_xtal, -}; - -static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_USBCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - if (div > 2) - div = 2; - - return parent_rate / div; -} - -static unsigned long s3c2412_getrate_usbsrc(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1); -} - -static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_usbsrc(clk, rate); - - if ((parent_rate / rate) == 2) - clkdivn |= S3C2412_CLKDIVN_USB48DIV; - else - clkdivn &= ~S3C2412_CLKDIVN_USB48DIV; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_usbsrc = { - .name = "usbsrc", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_usbsrc, - .set_rate = s3c2412_setrate_usbsrc, - .round_rate = s3c2412_roundrate_usbsrc, - .set_parent = s3c2412_setparent_usbsrc, - }, -}; - -static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_mdivclk) - clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static struct clk clk_msysclk = { - .name = "msysclk", - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_msysclk, - }, -}; - -static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - unsigned long clkdiv; - unsigned long dvs; - - /* Note, we current equate fclk andf msysclk for S3C2412 */ - - if (parent == &clk_msysclk || parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2412_CLKDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - /* update this under irq lockdown, clkdivn is not protected - * by the clock system. */ - - local_irq_save(flags); - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - clkdiv &= ~S3C2412_CLKDIVN_DVSEN; - clkdiv |= dvs; - __raw_writel(clkdiv, S3C2410_CLKDIVN); - - local_irq_restore(flags); - - return 0; -} - -static struct clk clk_armclk = { - .name = "armclk", - .parent = &clk_msysclk, - .ops = &(struct clk_ops) { - .set_parent = s3c2412_setparent_armclk, - }, -}; - -/* these next clocks have an divider immediately after them, - * so we can register them with their divider and leave out the - * intermediate clock stage -*/ -static unsigned long s3c2412_roundrate_clksrc(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations as they cancel out */ - - div = (rate / parent_rate); - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / div; -} - -static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_uart(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_UARTDIV_MASK; - div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_uart = { - .name = "uartclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_uart, - .set_rate = s3c2412_setrate_uart, - .set_parent = s3c2412_setparent_uart, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_erefclk) - clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL; - else if (parent == &clk_mpll) - clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} - -static unsigned long s3c2412_getrate_i2s(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_I2SDIV_MASK; - div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_i2s = { - .name = "i2sclk", - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_i2s, - .set_rate = s3c2412_setrate_i2s, - .set_parent = s3c2412_setparent_i2s, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - - if (parent == &clk_usysclk) - clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK; - else if (parent == &clk_h) - clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK; - else - return -EINVAL; - - clk->parent = parent; - - __raw_writel(clksrc, S3C2412_CLKSRC); - return 0; -} -static unsigned long s3c2412_getrate_cam(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2410_CLKDIVN); - - div &= S3C2412_CLKDIVN_CAMDIV_MASK; - div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT; - - return parent_rate / (div + 1); -} - -static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN); - - rate = s3c2412_roundrate_clksrc(clk, rate); - - clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK; - clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT; - - __raw_writel(clkdivn, S3C2410_CLKDIVN); - return 0; -} - -static struct clk clk_cam = { - .name = "camif-upll", /* same as 2440 name */ - .ops = &(struct clk_ops) { - .get_rate = s3c2412_getrate_cam, - .set_rate = s3c2412_setrate_cam, - .set_parent = s3c2412_setparent_cam, - .round_rate = s3c2412_roundrate_clksrc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_disable[] = { - { - .name = "nand", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_NAND, - }, { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SDI, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIC, - }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_IIS, - }, { - .name = "spi", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_SPI, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_DMA3, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_LCDC, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USBD, - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_PWMT, - }, { - .name = "uart", - .devname = "s3c2412-uart.0", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2412-uart.1", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2412-uart.2", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_UART2, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = 0, - }, { - .name = "usb-bus-gadget", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_DEV48, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus, - .enable = s3c2412_clkcon_enable, - .ctrlbit = S3C2412_CLKCON_USB_HOST48, - } -}; - -/* clocks to add where we need to check their parentage */ - -struct clk_init { - struct clk *clk; - unsigned int bit; - struct clk *src_0; - struct clk *src_1; -}; - -static struct clk_init clks_src[] __initdata = { - { - .clk = &clk_usysclk, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_urefclk, - .src_1 = &clk_upll, - }, { - .clk = &clk_i2s, - .bit = S3C2412_CLKSRC_I2SCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_cam, - .bit = S3C2412_CLKSRC_CAMCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - }, { - .clk = &clk_msysclk, - .bit = S3C2412_CLKSRC_MSYSCLK_MPLL, - .src_0 = &clk_mdivclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_uart, - .bit = S3C2412_CLKSRC_UARTCLK_MPLL, - .src_0 = &clk_erefclk, - .src_1 = &clk_mpll, - }, { - .clk = &clk_usbsrc, - .bit = S3C2412_CLKSRC_USBCLK_HCLK, - .src_0 = &clk_usysclk, - .src_1 = &clk_h, - /* here we assume OM[4] select xtal */ - }, { - .clk = &clk_erefclk, - .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, { - .clk = &clk_urefclk, - .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK, - .src_0 = &clk_xtal, - .src_1 = &clk_ext, - }, -}; - -/* s3c2412_clk_initparents - * - * Initialise the parents for the clocks that we get at start-time -*/ - -static void __init s3c2412_clk_initparents(void) -{ - unsigned long clksrc = __raw_readl(S3C2412_CLKSRC); - struct clk_init *cip = clks_src; - struct clk *src; - int ptr; - int ret; - - for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) { - ret = s3c24xx_register_clock(cip->clk); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - cip->clk->name, ret); - } - - src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0; - - printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name); - clk_set_parent(cip->clk, src); - } -} - -/* clocks to add straight away */ - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_usb_bus, - &clk_mrefclk, - &clk_armclk, -}; - -static struct clk_lookup s3c2412_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk), -}; - -int __init s3c2412_baseclk_add(void) -{ - unsigned long clkcon = __raw_readl(S3C2410_CLKCON); - unsigned int dvs; - struct clk *clkp; - int ret; - int ptr; - - clk_upll.enable = s3c2412_upll_enable; - clk_usb_bus.parent = &clk_usbsrc; - clk_usb_bus.rate = 0x0; - - clk_f.parent = &clk_msysclk; - - s3c2412_clk_initparents(); - - for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { - clkp = clks[ptr]; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* set the dvs state according to what we got at boot time */ - - dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN; - - if (dvs) - clk_armclk.parent = &clk_h; - - printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off"); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n"); - - /* for the moment, let's use the UPLL, and see if we can - * get 48MHz */ - - clk_set_parent(&clk_usysclk, &clk_upll); - clk_set_parent(&clk_usbsrc, &clk_usysclk); - clk_set_rate(&clk_usbsrc, 48*1000*1000); - } - - printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on", - print_mhz(clk_get_rate(&clk_upll)), - print_mhz(clk_get_rate(&clk_usb_bus))); - - /* register clocks from clock array */ - - clkp = init_clocks; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { - /* ensure that we note the clock state */ - - clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0; - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - } - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - clkp = init_clocks_disable; - for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { - - ret = s3c24xx_register_clock(clkp); - if (ret < 0) { - printk(KERN_ERR "Failed to register clock %s (%d)\n", - clkp->name, ret); - } - - s3c2412_clkcon_enable(clkp, 0); - } - - clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup)); - return 0; -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c deleted file mode 100644 index d421a72920a5..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2416.c +++ /dev/null @@ -1,171 +0,0 @@ -/* linux/arch/arm/mach-s3c2416/clock.c - * - * Copyright (c) 2010 Simtec Electronics - * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org> - * - * S3C2416 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/clk.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> -#include <plat/pll.h> - -#include <asm/mach/map.h> - -#include <mach/regs-clock.h> -#include <mach/regs-s3c2443-clock.h> - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[8] = { - [0] = 1, - [1] = 2, - [2] = 3, - [3] = 4, - [5] = 6, - [7] = 8, -}; - -static struct clksrc_clk hsspi_eplldiv = { - .clk = { - .name = "hsspi-eplldiv", - .parent = &clk_esysclk.clk, - .ctrlbit = (1 << 14), - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, -}; - -static struct clk *hsspi_sources[] = { - [0] = &hsspi_eplldiv.clk, - [1] = NULL, /* to fix */ -}; - -static struct clksrc_clk hsspi_mux = { - .clk = { - .name = "hsspi-if", - }, - .sources = &(struct clksrc_sources) { - .sources = hsspi_sources, - .nr_sources = ARRAY_SIZE(hsspi_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, -}; - -static struct clksrc_clk hsmmc_div[] = { - [0] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.0", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, - }, - [1] = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, - }, -}; - -static struct clksrc_clk hsmmc_mux0 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.0", - .ctrlbit = (1 << 6), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[0].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 }, -}; - -static struct clksrc_clk hsmmc_mux1 = { - .clk = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .ctrlbit = (1 << 12), - .enable = s3c2443_clkcon_enable_s, - }, - .sources = &(struct clksrc_sources) { - .nr_sources = 2, - .sources = (struct clk * []) { - [0] = &hsmmc_div[1].clk, - [1] = NULL, /* to fix */ - }, - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 }, -}; - -static struct clk hsmmc0_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2416_HCLKCON_HSMMC0, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &hsspi_eplldiv, - &hsspi_mux, - &hsmmc_div[0], - &hsmmc_div[1], - &hsmmc_mux0, - &hsmmc_mux1, -}; - -static struct clk_lookup s3c2416_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk), - /* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */ - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk), -}; - -void __init s3c2416_init_clocks(int xtal) -{ - u32 epllcon = __raw_readl(S3C2443_EPLLCON); - u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4); - int ptr; - - /* s3c2416 EPLL compatible with s3c64xx */ - clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1); - - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2416_get_pll, - armdiv, ARRAY_SIZE(armdiv), - S3C2416_CLKDIV0_ARMDIV_MASK); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c24xx_register_clock(&hsmmc0_clk); - clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup)); - -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c deleted file mode 100644 index 5527226fd61f..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s3c2440/clock.c - * - * Copyright (c) 2004-2005 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440 Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/serial_core.h> -#include <linux/serial_s3c.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -/* S3C2440 extended clock support */ - -static unsigned long s3c2440_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div = (parent_rate / rate) / 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2440_camif_upll_round(clk, rate); - - camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK); - - if (rate != parent_rate) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static unsigned long s3c2440_camif_upll_getrate(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL)) - return parent_rate; - - camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK; - - return parent_rate / (camdivn + 1) / 2; -} - -/* Extra S3C2440 clocks */ - -static struct clk s3c2440_clk_cam = { - .name = "camif", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2440_clk_cam_upll = { - .name = "camif-upll", - .ops = &(struct clk_ops) { - .set_rate = s3c2440_camif_upll_setrate, - .get_rate = s3c2440_camif_upll_getrate, - .round_rate = s3c2440_camif_upll_round, - }, -}; - -static struct clk s3c2440_clk_ac97 = { - .name = "ac97", - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_AC97, -}; - -#define S3C24XX_VA_UART0 (S3C_VA_UART) -#define S3C24XX_VA_UART1 (S3C_VA_UART + 0x4000 ) -#define S3C24XX_VA_UART2 (S3C_VA_UART + 0x8000 ) -#define S3C24XX_VA_UART3 (S3C_VA_UART + 0xC000 ) - -static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) -{ - unsigned long ucon0, ucon1, ucon2, divisor; - - /* the fun of calculating the uart divisors on the s3c2440 */ - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) - divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6; - else if (ucon1 != 0) - divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21; - else if (ucon2 != 0) - divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36; - else - /* manual calims 44, seems to be 9 */ - divisor = 9; - - return clk_get_rate(clk->parent) / divisor; -} - -static struct clk s3c2440_clk_fclk_n = { - .name = "fclk_n", - .parent = &clk_f, - .ops = &(struct clk_ops) { - .get_rate = s3c2440_fclk_n_getrate, - }, -}; - -static struct clk_lookup s3c2440_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n), - CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0), - CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1), - CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2), - CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll), -}; - -static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2440: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2440_clk_cam.parent = clock_h; - s3c2440_clk_ac97.parent = clock_p; - s3c2440_clk_cam_upll.parent = clock_upll; - s3c24xx_register_clock(&s3c2440_clk_fclk_n); - - s3c24xx_register_clock(&s3c2440_clk_ac97); - s3c24xx_register_clock(&s3c2440_clk_cam); - s3c24xx_register_clock(&s3c2440_clk_cam_upll); - clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup)); - - clk_disable(&s3c2440_clk_ac97); - clk_disable(&s3c2440_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c2440_clk_add, -}; - -static __init int s3c24xx_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c24xx_clk_init); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c deleted file mode 100644 index 76cd31f7804e..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c2443.c +++ /dev/null @@ -1,212 +0,0 @@ -/* linux/arch/arm/mach-s3c2443/clock.c - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2443 Clock control support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/serial_core.h> -#include <linux/io.h> - -#include <asm/mach/map.h> - -#include <mach/hardware.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/cpu-freq.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -/* We currently have to assume that the system is running - * from the XTPll input, and that all ***REFCLKs are being - * fed from it, as we cannot read the state of OM[4] from - * software. - * - * It would be possible for each board initialisation to - * set the correct muxing at initialisation -*/ - -/* clock selections */ - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. - * The real clock definition is done in s3c2443-clock.c, - * only the armdiv divisor table must be defined here. -*/ - -static unsigned int armdiv[16] = { - [S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 1, - [S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 2, - [S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 3, - [S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 4, - [S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 6, - [S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 8, - [S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 12, - [S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT] = 16, -}; - -/* hsspi - * - * high-speed spi clock, sourced from esysclk -*/ - -static struct clksrc_clk clk_hsspi = { - .clk = { - .name = "hsspi-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_HSSPICLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - - -/* clk_hsmcc_div - * - * this clock is sourced from epll, and is fed through a divider, - * to a mux controlled by sclkcon where either it or a extclk can - * be fed to the hsmmc block -*/ - -static struct clksrc_clk clk_hsmmc_div = { - .clk = { - .name = "hsmmc-div", - .devname = "s3c-sdhci.1", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, -}; - -static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent) -{ - unsigned long clksrc = __raw_readl(S3C2443_SCLKCON); - - clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT | - S3C2443_SCLKCON_HSMMCCLK_EPLL); - - if (parent == &clk_epll) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL; - else if (parent == &clk_ext) - clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT; - else - return -EINVAL; - - if (clk->usage > 0) { - __raw_writel(clksrc, S3C2443_SCLKCON); - } - - clk->parent = parent; - return 0; -} - -static int s3c2443_enable_hsmmc(struct clk *clk, int enable) -{ - return s3c2443_setparent_hsmmc(clk, clk->parent); -} - -static struct clk clk_hsmmc = { - .name = "hsmmc-if", - .devname = "s3c-sdhci.1", - .parent = &clk_hsmmc_div.clk, - .enable = s3c2443_enable_hsmmc, - .ops = &(struct clk_ops) { - .set_parent = s3c2443_setparent_hsmmc, - }, -}; - -/* standard clock definitions */ - -static struct clk init_clocks_off[] = { - { - .name = "sdi", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SDI, - }, { - .name = "spi", - .devname = "s3c2410-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_SPI1, - } -}; - -/* clocks to add straight away */ - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_hsspi, - &clk_hsmmc_div, -}; - -static struct clk *clks[] __initdata = { - &clk_hsmmc, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk), -}; - -void __init s3c2443_init_clocks(int xtal) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - int ptr; - - clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - clk_epll.parent = &clk_epllref.clk; - - s3c2443_common_init_clocks(xtal, s3c2443_get_mpll, - armdiv, ARRAY_SIZE(armdiv), - S3C2443_CLKDIV0_ARMDIV_MASK); - - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - /* We must be careful disabling the clocks we are not intending to - * be using at boot time, as subsystems such as the LCD which do - * their own DMA requests to the bus can cause the system to lockup - * if they where in the middle of requesting bus access. - * - * Disabling the LCD clock if the LCD is active is very dangerous, - * and therefore the bootloader should be careful to not enable - * the LCD clock if it is not needed. - */ - - /* install (and disable) the clocks we do not need immediately */ - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); -} diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c deleted file mode 100644 index 6d9b688c442b..000000000000 --- a/arch/arm/mach-s3c24xx/clock-s3c244x.c +++ /dev/null @@ -1,141 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c - * - * Copyright (c) 2004-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2440/S3C2442 Common clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <linux/atomic.h> -#include <asm/irq.h> - -#include <mach/regs-clock.h> - -#include <plat/clock.h> -#include <plat/cpu.h> - -static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent) -{ - unsigned long camdivn; - unsigned long dvs; - - if (parent == &clk_f) - dvs = 0; - else if (parent == &clk_h) - dvs = S3C2440_CAMDIVN_DVSEN; - else - return -EINVAL; - - clk->parent = parent; - - camdivn = __raw_readl(S3C2440_CAMDIVN); - camdivn &= ~S3C2440_CAMDIVN_DVSEN; - camdivn |= dvs; - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -static struct clk clk_arm = { - .name = "armclk", - .id = -1, - .ops = &(struct clk_ops) { - .set_parent = s3c2440_setparent_armclk, - }, -}; - -static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif) -{ - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - unsigned long clkdivn; - struct clk *clock_upll; - int ret; - - printk("S3C244X: Clock Support, DVS %s\n", - (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off"); - - clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f; - - ret = s3c24xx_register_clock(&clk_arm); - if (ret < 0) { - printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret); - return ret; - } - - clock_upll = clk_get(NULL, "upll"); - if (IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C244X: Failed to get upll clock\n"); - return -ENOENT; - } - - /* check rate of UPLL, and if it is near 96MHz, then change - * to using half the UPLL rate for the system */ - - if (clk_get_rate(clock_upll) > (94 * MHZ)) { - clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - - spin_lock(&clocks_lock); - - clkdivn = __raw_readl(S3C2410_CLKDIVN); - clkdivn |= S3C2440_CLKDIVN_UCLK; - __raw_writel(clkdivn, S3C2410_CLKDIVN); - - spin_unlock(&clocks_lock); - } - - return 0; -} - -static struct subsys_interface s3c2440_clk_interface = { - .name = "s3c2440_clk", - .subsys = &s3c2440_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2440_clk_init(void) -{ - return subsys_interface_register(&s3c2440_clk_interface); -} - -arch_initcall(s3c2440_clk_init); - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c244x_clk_add, -}; - -static int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c deleted file mode 100644 index 65d3eef73090..000000000000 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Common code for SoCs starting with the S3C2443 - * - * Copyright (c) 2007, 2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/regs-s3c2443-clock.h> - -#include <plat/clock.h> -#include <plat/clock-clksrc.h> -#include <plat/cpu.h> - -#include <plat/cpu-freq.h> - - -static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable) -{ - u32 ctrlbit = clk->ctrlbit; - u32 con = __raw_readl(reg); - - if (enable) - con |= ctrlbit; - else - con &= ~ctrlbit; - - __raw_writel(con, reg); - return 0; -} - -int s3c2443_clkcon_enable_h(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_HCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_p(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_PCLKCON, clk, enable); -} - -int s3c2443_clkcon_enable_s(struct clk *clk, int enable) -{ - return s3c2443_gate(S3C2443_SCLKCON, clk, enable); -} - -/* mpllref is a direct descendant of clk_xtal by default, but it is not - * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as - * such directly equating the two source clocks is impossible. - */ -static struct clk clk_mpllref = { - .name = "mpllref", - .parent = &clk_xtal, -}; - -static struct clk *clk_epllref_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpllref, - [2] = &clk_xtal, - [3] = &clk_ext, -}; - -struct clksrc_clk clk_epllref = { - .clk = { - .name = "epllref", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_epllref_sources, - .nr_sources = ARRAY_SIZE(clk_epllref_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 }, -}; - -/* esysclk - * - * this is sourced from either the EPLL or the EPLLref clock -*/ - -static struct clk *clk_sysclk_sources[] = { - [0] = &clk_epllref.clk, - [1] = &clk_epll, -}; - -struct clksrc_clk clk_esysclk = { - .clk = { - .name = "esysclk", - .parent = &clk_epll, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_sysclk_sources, - .nr_sources = ARRAY_SIZE(clk_sysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 }, -}; - -static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long div = __raw_readl(S3C2443_CLKDIV0); - - div &= S3C2443_CLKDIV0_EXTDIV_MASK; - div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */ - - return parent_rate / (div + 1); -} - -static struct clk clk_mdivclk = { - .name = "mdivclk", - .parent = &clk_mpllref, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_getrate_mdivclk, - }, -}; - -static struct clk *clk_msysclk_sources[] = { - [0] = &clk_mpllref, - [1] = &clk_mpll, - [2] = &clk_mdivclk, - [3] = &clk_mpllref, -}; - -static struct clksrc_clk clk_msysclk = { - .clk = { - .name = "msysclk", - .parent = &clk_xtal, - }, - .sources = &(struct clksrc_sources) { - .sources = clk_msysclk_sources, - .nr_sources = ARRAY_SIZE(clk_msysclk_sources), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 }, -}; - -/* prediv - * - * this divides the msysclk down to pass to h/p/etc. - */ - -static unsigned long s3c2443_prediv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK; - clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT; - - return rate / (clkdiv0 + 1); -} - -static struct clk clk_prediv = { - .name = "prediv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .get_rate = s3c2443_prediv_getrate, - }, -}; - -/* hclk divider - * - * divides the prediv and provides the hclk. - */ - -static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK; - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_h_ops = { - .get_rate = s3c2443_hclkdiv_getrate, -}; - -/* pclk divider - * - * divides the hclk and provides the pclk. - */ - -static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); - - clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0); - - return rate / (clkdiv0 + 1); -} - -static struct clk_ops clk_p_ops = { - .get_rate = s3c2443_pclkdiv_getrate, -}; - -/* armdiv - * - * this clock is sourced from msysclk and can have a number of - * divider values applied to it to then be fed into armclk. -*/ - -static unsigned int *armdiv; -static int nr_armdiv; -static int armdivmask; - -static unsigned long s3c2443_armclk_roundrate(struct clk *clk, - unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned best = 256; /* bigger than any value */ - unsigned div; - int ptr; - - if (!nr_armdiv) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) - best = div; - } - } - - return parent / best; -} - -static unsigned long s3c2443_armclk_getrate(struct clk *clk) -{ - unsigned long rate = clk_get_rate(clk->parent); - unsigned long clkcon0; - int val; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= armdivmask; - val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT; - - return rate / armdiv[val]; -} - -static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent = clk_get_rate(clk->parent); - unsigned long calc; - unsigned div; - unsigned best = 256; /* bigger than any value */ - int ptr; - int val = -1; - - if (!nr_armdiv || !armdivmask) - return -EINVAL; - - for (ptr = 0; ptr < nr_armdiv; ptr++) { - div = armdiv[ptr]; - if (div) { - /* cpufreq provides 266mhz as 266666000 not 266666666 */ - calc = (parent / div / 1000) * 1000; - if (calc <= rate && div < best) { - best = div; - val = ptr; - } - } - } - - if (val >= 0) { - unsigned long clkcon0; - - clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= ~armdivmask; - clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; - __raw_writel(clkcon0, S3C2443_CLKDIV0); - } - - return (val == -1) ? -EINVAL : 0; -} - -static struct clk clk_armdiv = { - .name = "armdiv", - .parent = &clk_msysclk.clk, - .ops = &(struct clk_ops) { - .round_rate = s3c2443_armclk_roundrate, - .get_rate = s3c2443_armclk_getrate, - .set_rate = s3c2443_armclk_setrate, - }, -}; - -/* armclk - * - * this is the clock fed into the ARM core itself, from armdiv or from hclk. - */ - -static struct clk *clk_arm_sources[] = { - [0] = &clk_armdiv, - [1] = &clk_h, -}; - -static struct clksrc_clk clk_arm = { - .clk = { - .name = "armclk", - }, - .sources = &(struct clksrc_sources) { - .sources = clk_arm_sources, - .nr_sources = ARRAY_SIZE(clk_arm_sources), - }, - .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 }, -}; - -/* usbhost - * - * usb host bus-clock, usually 48MHz to provide USB bus clock timing -*/ - -static struct clksrc_clk clk_usb_bus_host = { - .clk = { - .name = "usb-bus-host-parent", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_USBHOST, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 }, -}; - -/* common clksrc clocks */ - -static struct clksrc_clk clksrc_clks[] = { - { - /* camera interface bus-clock, divided down from esysclk */ - .clk = { - .name = "camif-upll", /* same as 2440 name */ - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_CAMCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 }, - }, { - .clk = { - .name = "display-if", - .parent = &clk_esysclk.clk, - .ctrlbit = S3C2443_SCLKCON_DISPCLK, - .enable = s3c2443_clkcon_enable_s, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 }, - }, -}; - -static struct clksrc_clk clk_esys_uart = { - /* ART baud-rate clock sourced from esysclk via a divisor */ - .clk = { - .name = "uartclk", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, -}; - -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -static struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - -static struct clk init_clocks_off[] = { - { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { - .name = "adc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_ADC, - }, { - .name = "i2c", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIC, - } -}; - -static struct clk init_clocks[] = { - { - .name = "dma.0", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA0, - }, { - .name = "dma.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA1, - }, { - .name = "dma.2", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA2, - }, { - .name = "dma.3", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA3, - }, { - .name = "dma.4", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA4, - }, { - .name = "dma.5", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_DMA5, - }, { - .name = "gpio", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_GPIO, - }, { - .name = "usb-host", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBH, - }, { - .name = "usb-device", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_USBD, - }, { - .name = "lcd", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_LCDC, - - }, { - .name = "timers", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_PWMT, - }, { - .name = "cfc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_CFC, - }, { - .name = "ssmc", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_SSMC, - }, { - .name = "uart", - .devname = "s3c2440-uart.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART0, - }, { - .name = "uart", - .devname = "s3c2440-uart.1", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART1, - }, { - .name = "uart", - .devname = "s3c2440-uart.2", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART2, - }, { - .name = "uart", - .devname = "s3c2440-uart.3", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_UART3, - }, { - .name = "rtc", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_RTC, - }, { - .name = "watchdog", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_WDT, - }, { - .name = "ac97", - .parent = &clk_p, - .ctrlbit = S3C2443_PCLKCON_AC97, - }, { - .name = "nand", - .parent = &clk_h, - }, { - .name = "usb-bus-host", - .parent = &clk_usb_bus_host.clk, - } -}; - -static struct clk hsmmc1_clk = { - .name = "hsmmc", - .devname = "s3c-sdhci.1", - .parent = &clk_h, - .enable = s3c2443_clkcon_enable_h, - .ctrlbit = S3C2443_HCLKCON_HSMMC, -}; - -static struct clk hsspi_clk = { - .name = "spi", - .devname = "s3c2443-spi.0", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_HSSPI, -}; - -/* EPLLCON compatible enough to get on/off information */ - -void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll) -{ - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); - unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); - struct clk *xtal_clk; - unsigned long xtal; - unsigned long pll; - int ptr; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - pll = get_mpll(mpllcon, xtal); - clk_msysclk.clk.rate = pll; - clk_mpll.rate = pll; - - printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", - (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)), - print_mhz(clk_get_rate(&clk_h)), - print_mhz(clk_get_rate(&clk_p))); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++) - s3c_set_clksrc(&clksrc_clks[ptr], true); - - /* ensure usb bus clock is within correct rate of 48MHz */ - - if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) { - printk(KERN_INFO "Warning: USB host bus not at 48MHz\n"); - clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000); - } - - printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n", - (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on", - print_mhz(clk_get_rate(&clk_epll)), - print_mhz(clk_get_rate(&clk_usb_bus))); -} - -static struct clk *clks[] __initdata = { - &clk_prediv, - &clk_mpllref, - &clk_mdivclk, - &clk_ext, - &clk_epll, - &clk_usb_bus, - &clk_armdiv, - &hsmmc1_clk, - &hsspi_clk, -}; - -static struct clksrc_clk *clksrcs[] __initdata = { - &clk_i2s_eplldiv, - &clk_i2s, - &clk_usb_bus_host, - &clk_epllref, - &clk_esysclk, - &clk_msysclk, - &clk_arm, -}; - -static struct clk_lookup s3c2443_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), - CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk), - CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk), -}; - -void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll, - unsigned int *divs, int nr_divs, - int divmask) -{ - int ptr; - - armdiv = divs; - nr_armdiv = nr_divs; - armdivmask = divmask; - - /* s3c2443 parents h clock from prediv */ - clk_h.parent = &clk_prediv; - clk_h.ops = &clk_h_ops; - - /* and p clock from h clock */ - clk_p.parent = &clk_h; - clk_p.ops = &clk_p_ops; - - clk_usb_bus.parent = &clk_usb_bus_host.clk; - clk_epll.parent = &clk_epllref.clk; - - s3c24xx_register_baseclocks(xtal); - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_register_clksrc(clksrcs[ptr], 1); - - s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - /* See s3c2443/etc notes on disabling clocks at init time */ - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup)); - - s3c2443_common_setup_clocks(get_mpll); -} diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 1bc8e73c94f9..c0763b837745 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -53,6 +53,7 @@ #include <plat/cpu-freq.h> #include <plat/pll.h> #include <plat/pwm-core.h> +#include <plat/watchdog-reset.h> #include "common.h" @@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410000, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410_init, .name = name_s3c2410 @@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32410002, .idmask = 0xffffffff, .map_io = s3c2410_map_io, - .init_clocks = s3c2410_init_clocks, .init_uarts = s3c2410_init_uarts, .init = s3c2410a_init, .name = name_s3c2410a @@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440000, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440 @@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440001, .idmask = 0xffffffff, .map_io = s3c2440_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, .name = name_s3c2440a @@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aaa, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442 @@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32440aab, .idmask = 0xffffffff, .map_io = s3c2442_map_io, - .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, .name = name_s3c2442b @@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412001, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32412003, .idmask = 0xffffffff, .map_io = s3c2412_map_io, - .init_clocks = s3c2412_init_clocks, .init_uarts = s3c2412_init_uarts, .init = s3c2412_init, .name = name_s3c2412, @@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32450003, .idmask = 0xffffffff, .map_io = s3c2416_map_io, - .init_clocks = s3c2416_init_clocks, .init_uarts = s3c2416_init_uarts, .init = s3c2416_init, .name = name_s3c2416, @@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = { .idcode = 0x32443001, .idmask = 0xffffffff, .map_io = s3c2443_map_io, - .init_clocks = s3c2443_init_clocks, .init_uarts = s3c2443_init_uarts, .init = s3c2443_init, .name = name_s3c2443, @@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = { }, }; -/* initialise all the clocks */ - -void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, - unsigned long hclk, - unsigned long pclk) -{ - clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), - clk_xtal.rate); - - clk_mpll.rate = fclk; - clk_h.rate = hclk; - clk_p.rate = pclk; - clk_f.rate = fclk; -} - #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) static struct resource s3c2410_dma_resource[] = { @@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = { }, }; #endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410) +void __init s3c2410_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2412 +void __init s3c2412_init_clocks(int xtal) +{ + s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#ifdef CONFIG_CPU_S3C2416 +void __init s3c2416_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440) +void __init s3c2440_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442) +void __init s3c2442_init_clocks(int xtal) +{ + s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR); + samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); +} +#endif + +#ifdef CONFIG_CPU_S3C2443 +void __init s3c2443_init_clocks(int xtal) +{ + s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR); +} +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \ + defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dclk_resource[] = { + [0] = DEFINE_RES_MEM(0x56000084, 0x4), +}; + +struct platform_device s3c2410_device_dclk = { + .name = "s3c2410-dclk", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dclk_resource), + .resource = s3c2410_dclk_resource, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index e46c10417216..ac3ff12a0601 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops; #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s3c244x_init_clocks(int xtal); extern void s3c244x_restart(enum reboot_mode mode, const char *cmd); #else -#define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); extern void s3c2440_map_io(void); +extern void s3c2440_init_clocks(int xtal); extern void s3c2440_init_irq(void); #else #define s3c2440_init NULL @@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void); #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); extern void s3c2442_map_io(void); +extern void s3c2442_init_clocks(int xtal); extern void s3c2442_init_irq(void); #else #define s3c2442_init NULL @@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma; extern struct platform_device s3c2440_device_dma; extern struct platform_device s3c2443_device_dma; +extern struct platform_device s3c2410_device_dclk; + +#ifdef CONFIG_S3C2410_COMMON_CLK +void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2412_COMMON_CLK +void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, + unsigned long ext_f, void __iomem *reg_base); +#endif +#ifdef CONFIG_S3C2443_COMMON_CLK +void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, + int current_soc, + void __iomem *reg_base); +#endif + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c index 2a0aa5684e72..d4d9514335f4 100644 --- a/arch/arm/mach-s3c24xx/cpufreq-utils.c +++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c @@ -14,6 +14,7 @@ #include <linux/errno.h> #include <linux/cpufreq.h> #include <linux/io.h> +#include <linux/clk.h> #include <mach/map.h> #include <mach/regs-clock.h> @@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) */ void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg) { - __raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON); + if (!IS_ERR(cfg->mpll)) + clk_set_rate(cfg->mpll, cfg->pll.frequency); } diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S deleted file mode 100644 index 2f39737544c0..000000000000 --- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S +++ /dev/null @@ -1,101 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * Debugging macro include header - * - * Copyright (C) 1994-1999 Russell King - * Copyright (C) 2005 Simtec Electronics - * - * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/map.h> -#include <mach/regs-gpio.h> -#include <linux/serial_s3c.h> - -#define S3C2410_UART1_OFF (0x4000) -#define SHIFT_2440TXF (14-9) - - .macro addruart, rp, rv, tmp - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - - .macro fifo_full_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 1004f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? -1004: - ldr \rd, [\rx, # S3C2410_UFSTAT] - moveq \rd, \rd, lsr #SHIFT_2440TXF - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - - .macro fifo_full_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - tst \rd, #S3C2410_UFSTAT_TXFULL - .endm - -/* fifo level reading */ - - .macro fifo_level_s3c24xx rd, rx - @ check for arm920 vs arm926. currently assume all arm926 - @ devices have an 64 byte FIFO identical to the s3c2440 - mrc p15, 0, \rd, c0, c0 - and \rd, \rd, #0xff0 - teq \rd, #0x260 - beq 10000f - mrc p15, 0, \rd, c1, c0 - tst \rd, #1 - addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART) - addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART) - bic \rd, \rd, #0xff000 - ldr \rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)] - and \rd, \rd, #0x00ff0000 - teq \rd, #0x00440000 @ is it 2440? - -10000: - ldr \rd, [\rx, # S3C2410_UFSTAT] - andne \rd, \rd, #S3C2410_UFSTAT_TXMASK - andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK - .endm - - .macro fifo_level_s3c2410 rd, rx - ldr \rd, [\rx, # S3C2410_UFSTAT] - and \rd, \rd, #S3C2410_UFSTAT_TXMASK - .endm - -/* Select the correct implementation depending on the configuration. The - * S3C2440 will get selected by default, as these are the most widely - * used variants of these -*/ - -#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY) -#define fifo_full fifo_full_s3c2410 -#define fifo_level fifo_level_s3c2410 -#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY) -#define fifo_full fifo_full_s3c24xx -#define fifo_level fifo_level_s3c24xx -#endif - -/* include the reset of the code which will do the work */ - -#include <debug/samsung.S> diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h index 3415b60082d7..3db6c10de023 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h @@ -42,24 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -/* DCLKCON register addresses in gpio.h */ - -#define S3C2410_DCLKCON_DCLK0EN (1<<0) -#define S3C2410_DCLKCON_DCLK0_PCLK (0<<1) -#define S3C2410_DCLKCON_DCLK0_UCLK (1<<1) -#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4) -#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8) -#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4) -#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8) - -#define S3C2410_DCLKCON_DCLK1EN (1<<16) -#define S3C2410_DCLKCON_DCLK1_PCLK (0<<17) -#define S3C2410_DCLKCON_DCLK1_UCLK (1<<17) -#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24) -#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20) -#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24) - #define S3C2410_CLKDIVN_PDIVN (1<<0) #define S3C2410_CLKDIVN_HDIVN (1<<1) diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c2ef016032ab..c6583cfa5835 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -457,9 +457,6 @@ /* miscellaneous control */ #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) -#define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) - -#define S3C24XX_DCLKCON S3C24XX_GPIOREG2(0x84) /* see clock.h for dclk definitions */ diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c index 8ac9554aa996..5157e250dd13 100644 --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c @@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = { static void __init amlm5900_map_io(void) { s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init amlm5900_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + #ifdef CONFIG_FB_S3C2410 static struct s3c2410fb_display __initdata amlm5900_lcd_info = { .width = 160, @@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900") .map_io = amlm5900_map_io, .init_irq = s3c2410_init_irq, .init_machine = amlm5900_init, - .init_time = samsung_timer_init, + .init_time = amlm5900_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c index 81a270af2336..e053581cab0b 100644 --- a/arch/arm/mach-s3c24xx/mach-anubis.c +++ b/arch/arm/mach-s3c24xx/mach-anubis.c @@ -46,7 +46,6 @@ #include <net/ax88796.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-s3c24xx_simtec.h> @@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = { /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, @@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { @@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { static void __init anubis_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks)); - s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -428,6 +404,12 @@ static void __init anubis_map_io(void) } } +static void __init anubis_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); @@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis") .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = anubis_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c index d8f6bb1096cb..9db768f448a5 100644 --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c @@ -45,7 +45,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = { static void __init at2440evb_map_io(void) { s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init at2440evb_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init at2440evb_init(void) { s3c24xx_fb_set_platdata(&at2440evb_fb_info); @@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB") .map_io = at2440evb_map_io, .init_machine = at2440evb_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = at2440evb_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c index e371ff53a408..f9112b801a33 100644 --- a/arch/arm/mach-s3c24xx/mach-bast.c +++ b/arch/arm/mach-s3c24xx/mach-bast.c @@ -51,7 +51,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = { // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0 static struct platform_device *bast_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata bast_cpufreq = { .refresh = 7800, /* 7.8usec */ .auto_io = 1, @@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = { static void __init bast_map_io(void) { - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); - s3c_hwmon_set_platdata(&bast_hwmon_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init bast_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init bast_init(void) { register_syscore_ops(&bast_pm_syscore_ops); @@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST") .map_io = bast_map_io, .init_irq = s3c2410_init_irq, .init_machine = bast_init, - .init_time = samsung_timer_init, + .init_time = bast_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c index dc4db849f0fd..fc3a08d0cb3f 100644 --- a/arch/arm/mach-s3c24xx/mach-gta02.c +++ b/arch/arm/mach-s3c24xx/mach-gta02.c @@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = { static void __init gta02_map_io(void) { s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -585,6 +584,11 @@ static void __init gta02_machine_init(void) regulator_has_full_constraints(); } +static void __init gta02_init_time(void) +{ + s3c2442_init_clocks(12000000); + samsung_timer_init(); +} MACHINE_START(NEO1973_GTA02, "GTA02") /* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */ @@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02") .map_io = gta02_map_io, .init_irq = s3c2442_init_irq, .init_machine = gta02_machine_init, - .init_time = samsung_timer_init, + .init_time = gta02_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c index e453acd92cbf..fbf5487ae5d1 100644 --- a/arch/arm/mach-s3c24xx/mach-h1940.c +++ b/arch/arm/mach-s3c24xx/mach-h1940.c @@ -57,7 +57,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/gpio-cfg.h> @@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = { static void __init h1940_map_io(void) { s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -662,6 +660,12 @@ static void __init h1940_map_io(void) WARN_ON(gpiochip_add(&h1940_latch_gpiochip)); } +static void __init h1940_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init h1940_reserve(void) { @@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940") .reserve = h1940_reserve, .init_irq = s3c2410_init_irq, .init_machine = h1940_init, - .init_time = samsung_timer_init, + .init_time = h1940_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index 5faa7239e7d6..e81ea82c55f9 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = { static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init jive_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void jive_power_off(void) { printk(KERN_INFO "powering system down...\n"); @@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE") .init_irq = s3c2412_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, - .init_time = samsung_timer_init, + .init_time = jive_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c index 9e57fd9f4f3b..5cc40ec1d254 100644 --- a/arch/arm/mach-s3c24xx/mach-mini2440.c +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c @@ -54,7 +54,6 @@ #include <linux/mtd/partitions.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = { static void __init mini2440_map_io(void) { s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init mini2440_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + /* * mini2440_features string * @@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440") .map_io = mini2440_map_io, .init_machine = mini2440_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = mini2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 4cccaad34847..3ac2a54348d6 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -45,7 +45,6 @@ #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <linux/platform_data/mmc-s3cmci.h> @@ -535,11 +534,16 @@ static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); n30_hwinit(); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init n30_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + /* GPB3 is the line that controls the pull-up for the USB D+ line */ static void __init n30_init(void) @@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30") Ben Dooks <ben-linux@fluff.org> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, @@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35") /* Maintainer: Christer Weinigel <christer@weinigel.se> */ .atag_offset = 0x100, - .init_time = samsung_timer_init, + .init_time = n30_init_time, .init_machine = n30_init, .init_irq = s3c2410_init_irq, .map_io = n30_map_io, diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c index 3066851f584d..c82c281ce351 100644 --- a/arch/arm/mach-s3c24xx/mach-nexcoder.c +++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c @@ -42,7 +42,6 @@ #include <linux/platform_data/i2c-s3c2410.h> #include <plat/gpio-cfg.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void) static void __init nexcoder_map_io(void) { s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); nexcoder_sensorboard_init(); } +static void __init nexcoder_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init nexcoder_init(void) { s3c_i2c0_set_platdata(NULL); @@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") .map_io = nexcoder_map_io, .init_machine = nexcoder_init, .init_irq = s3c2440_init_irq, - .init_time = samsung_timer_init, + .init_time = nexcoder_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c index a4ae4bb3666d..189147b80eca 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris.c +++ b/arch/arm/mach-s3c24xx/mach-osiris.c @@ -40,7 +40,6 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/cpu-freq.h> #include <plat/devs.h> @@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, }; -static struct clk *osiris_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static struct s3c_cpufreq_board __initdata osiris_cpufreq = { .refresh = 7800, /* refresh period is 7.8usec */ .auto_io = 1, @@ -368,23 +360,7 @@ static void __init osiris_map_io(void) { unsigned long flags; - /* initialise the clocks */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = &clk_upll; - s3c24xx_dclk1.rate = 24*1000*1000; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks)); - s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -408,6 +384,12 @@ static void __init osiris_map_io(void) local_irq_restore(flags); } +static void __init osiris_init_time(void) +{ + s3c2440_init_clocks(12000000); + samsung_timer_init(); +} + static void __init osiris_init(void) { register_syscore_ops(&osiris_pm_syscore_ops); @@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS") .map_io = osiris_map_io, .init_irq = s3c2440_init_irq, .init_machine = osiris_init, - .init_time = samsung_timer_init, + .init_time = osiris_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c index bdb3faac2d9b..45833001186d 100644 --- a/arch/arm/mach-s3c24xx/mach-otom.c +++ b/arch/arm/mach-s3c24xx/mach-otom.c @@ -30,7 +30,6 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = { static void __init otom11_map_io(void) { s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init otom11_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init otom11_init(void) { s3c_i2c0_set_platdata(NULL); @@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1") .map_io = otom11_map_io, .init_machine = otom11_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = otom11_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c index 8c12787a8fd3..228c9094519d 100644 --- a/arch/arm/mach-s3c24xx/mach-qt2410.c +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c @@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup); static void __init qt2410_map_io(void) { s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc)); - s3c24xx_init_clocks(12*1000*1000); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init qt2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init qt2410_machine_init(void) { s3c_nand_set_platdata(&qt2410_nand_info); @@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410") .map_io = qt2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = qt2410_machine_init, - .init_time = samsung_timer_init, + .init_time = qt2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c index afb784e934c8..e2c6541909c1 100644 --- a/arch/arm/mach-s3c24xx/mach-rx1950.c +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c @@ -54,7 +54,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = { }; static struct platform_device *rx1950_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_lcd, &s3c_device_wdt, &s3c_device_i2c0, @@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = { &rx1950_leds, }; -static struct clk *rx1950_clocks[] __initdata = { - &s3c24xx_clkout0, - &s3c24xx_clkout1, -}; - static void __init rx1950_map_io(void) { - s3c24xx_clkout0.parent = &clk_h; - s3c24xx_clkout1.parent = &clk_f; - - s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks)); - s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); @@ -754,6 +743,12 @@ static void __init rx1950_map_io(void) s3c_pm_init(); } +static void __init rx1950_init_time(void) +{ + s3c2442_init_clocks(16934000); + samsung_timer_init(); +} + static void __init rx1950_init_machine(void) { int i; @@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950") .reserve = rx1950_reserve, .init_irq = s3c2442_init_irq, .init_machine = rx1950_init_machine, - .init_time = samsung_timer_init, + .init_time = rx1950_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c index e6535ce1bc5c..6e749ec3a2ea 100644 --- a/arch/arm/mach-s3c24xx/mach-rx3715.c +++ b/arch/arm/mach-s3c24xx/mach-rx3715.c @@ -46,7 +46,6 @@ #include <mach/regs-lcd.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/pm.h> @@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = { static void __init rx3715_map_io(void) { s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc)); - s3c24xx_init_clocks(16934000); s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init rx3715_init_time(void) +{ + s3c2440_init_clocks(16934000); + samsung_timer_init(); +} + /* H1940 and RX3715 need to reserve this for suspend */ static void __init rx3715_reserve(void) { @@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715") .reserve = rx3715_reserve, .init_irq = s3c2440_init_irq, .init_machine = rx3715_init_machine, - .init_time = samsung_timer_init, + .init_time = rx3715_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 70f0900d4bca..e4dcb9aa2ca2 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -18,7 +18,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> #include <linux/of_platform.h> -#include <linux/serial_core.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -29,48 +28,14 @@ #include "common.h" -/* - * The following lookup table is used to override device names when devices - * are registered from device tree. This is temporarily added to enable - * device tree support addition for the S3C2416 architecture. - * - * For drivers that require platform data to be provided from the machine - * file, a platform data pointer can also be supplied along with the - * devices names. Usually, the platform data elements that cannot be parsed - * from the device tree by the drivers (example: function pointers) are - * supplied. But it should be noted that this is a temporary mechanism and - * at some point, the drivers should be capable of parsing all the platform - * data from the device tree. - */ -static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = { - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART, - "s3c2440-uart.0", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000, - "s3c2440-uart.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000, - "s3c2440-uart.2", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000, - "s3c2440-uart.3", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0, - "s3c-sdhci.0", NULL), - OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1, - "s3c-sdhci.1", NULL), - OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC, - "s3c2440-i2c.0", NULL), - {}, -}; - static void __init s3c2416_dt_map_io(void) { s3c24xx_init_io(NULL, 0); - s3c24xx_init_clocks(12000000); } static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - s3c2416_auxdata_lookup, NULL); - + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } @@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)") .map_io = s3c2416_dt_map_io, .init_irq = irqchip_init, .init_machine = s3c2416_dt_machine_init, - .init_time = clocksource_of_init, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c index f32924ee0e9f..419fadd6e446 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2410.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c @@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = { static void __init smdk2410_map_io(void) { s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2410_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2410_init(void) { s3c_i2c0_set_platdata(NULL); @@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc .map_io = smdk2410_map_io, .init_irq = s3c2410_init_irq, .init_machine = smdk2410_init, - .init_time = samsung_timer_init, + .init_time = smdk2410_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index a03c855ee854..fb3b80e44595 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -104,11 +104,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline) static void __init smdk2413_map_io(void) { s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2413_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2413_machine_init(void) { /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -157,6 +162,6 @@ MACHINE_START(SMDK2413, "SMDK2413") .init_irq = s3c2412_init_irq, .map_io = smdk2413_map_io, .init_machine = smdk2413_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2413_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index b3b54d8e1410..fa6f30d23601 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c2443_device_dma, }; +static void __init smdk2416_init_time(void) +{ + s3c2416_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2416_map_io(void) { s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } @@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416") .init_irq = s3c2416_init_irq, .map_io = smdk2416_map_io, .init_machine = smdk2416_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2416_init_time, .restart = s3c2416_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c index d071dcfea548..5fb89c0ae17a 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2440.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c @@ -38,7 +38,6 @@ #include <mach/fb.h> #include <linux/platform_data/i2c-s3c2410.h> -#include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> #include <plat/samsung-time.h> @@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = { static void __init smdk2440_map_io(void) { s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc)); - s3c24xx_init_clocks(16934400); s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2440_init_time(void) +{ + s3c2440_init_clocks(16934400); + samsung_timer_init(); +} + static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); @@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440") .init_irq = s3c2440_init_irq, .map_io = smdk2440_map_io, .init_machine = smdk2440_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2440_init_time, .restart = s3c244x_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 06c4d77de3a5..ef5d5ea33182 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = { static void __init smdk2443_map_io(void) { s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init smdk2443_init_time(void) +{ + s3c2443_init_clocks(12000000); + samsung_timer_init(); +} + static void __init smdk2443_machine_init(void) { s3c_i2c0_set_platdata(NULL); @@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443") .init_irq = s3c2443_init_irq, .map_io = smdk2443_map_io, .init_machine = smdk2443_machine_init, - .init_time = samsung_timer_init, + .init_time = smdk2443_init_time, .restart = s3c2443_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c index 4108b2f0cede..c616ca2d409e 100644 --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c @@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = { static void __init tct_hammer_map_io(void) { s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init tct_hammer_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init tct_hammer_init(void) { s3c_i2c0_set_platdata(NULL); @@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER") .map_io = tct_hammer_map_io, .init_irq = s3c2410_init_irq, .init_machine = tct_hammer_init, - .init_time = samsung_timer_init, + .init_time = tct_hammer_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c index 1cc5b1bd51cd..f88c584c3001 100644 --- a/arch/arm/mach-s3c24xx/mach-vr1000.c +++ b/arch/arm/mach-s3c24xx/mach-vr1000.c @@ -43,7 +43,6 @@ #include <mach/regs-gpio.h> #include <mach/gpio-samsung.h> -#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/samsung-time.h> @@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = { /* devices for this board */ static struct platform_device *vr1000_devices[] __initdata = { + &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_lcd, &s3c_device_wdt, @@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] __initdata = { - &s3c24xx_dclk0, - &s3c24xx_dclk1, - &s3c24xx_clkout0, - &s3c24xx_clkout1, - &s3c24xx_uclk, -}; - static void vr1000_power_off(void) { gpio_direction_output(S3C2410_GPB(9), 1); @@ -314,29 +306,19 @@ static void vr1000_power_off(void) static void __init vr1000_map_io(void) { - /* initialise clock sources */ - - s3c24xx_dclk0.parent = &clk_upll; - s3c24xx_dclk0.rate = 12*1000*1000; - - s3c24xx_dclk1.parent = NULL; - s3c24xx_dclk1.rate = 3692307; - - s3c24xx_clkout0.parent = &s3c24xx_dclk0; - s3c24xx_clkout1.parent = &s3c24xx_dclk1; - - s3c24xx_uclk.parent = &s3c24xx_clkout1; - - s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks)); - pm_power_off = vr1000_power_off; s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc)); - s3c24xx_init_clocks(0); s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vr1000_init_time(void) +{ + s3c2410_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vr1000_init(void) { s3c_i2c0_set_platdata(NULL); @@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000") .map_io = vr1000_map_io, .init_machine = vr1000_init, .init_irq = s3c2410_init_irq, - .init_time = samsung_timer_init, + .init_time = vr1000_init_time, .restart = s3c2410_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index a79af7843aed..9104c2be36c9 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -140,11 +140,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline) static void __init vstms_map_io(void) { s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc)); - s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); } +static void __init vstms_init_time(void) +{ + s3c2412_init_clocks(12000000); + samsung_timer_init(); +} + static void __init vstms_init(void) { s3c_i2c0_set_platdata(NULL); @@ -160,6 +165,6 @@ MACHINE_START(VSTMS, "VSTMS") .init_irq = s3c2412_init_irq, .init_machine = vstms_init, .map_io = vstms_map_io, - .init_time = samsung_timer_init, + .init_time = vstms_init_time, .restart = s3c2412_restart, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c index 68ea5b7e5dc7..b19256ec8d40 100644 --- a/arch/arm/mach-s3c24xx/pm.c +++ b/arch/arm/mach-s3c24xx/pm.c @@ -51,9 +51,6 @@ #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { - SAVE_ITEM(S3C2410_LOCKTIME), - SAVE_ITEM(S3C2410_CLKCON), - /* we restore the timings here, with the proviso that the board * brings the system up in an slower, or equal frequency setting * to the original system. @@ -69,18 +66,6 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON3), SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), - -#ifndef CONFIG_CPU_FREQ - SAVE_ITEM(S3C2410_CLKDIVN), - SAVE_ITEM(S3C2410_MPLLCON), - SAVE_ITEM(S3C2410_REFRESH), -#endif - SAVE_ITEM(S3C2410_UPLLCON), - SAVE_ITEM(S3C2410_CLKSLOW), -}; - -static struct sleep_save misc_save[] = { - SAVE_ITEM(S3C2410_DCLKCON), }; /* s3c_pm_check_resume_pin @@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void) void s3c_pm_restore_core(void) { s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); } void s3c_pm_save_core(void) { - s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); } diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c index 04b58cb49888..7eab88829883 100644 --- a/arch/arm/mach-s3c24xx/s3c2410.c +++ b/arch/arm/mach-s3c24xx/s3c2410.c @@ -85,62 +85,6 @@ void __init s3c2410_map_io(void) void __init_or_cpufreq s3c2410_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -/* fake ARMCLK for use with cpufreq, etc. */ - -static struct clk s3c2410_armclk = { - .name = "armclk", - .parent = &clk_f, - .id = -1, -}; - -static struct clk_lookup s3c2410_clk_lookup[] = { - CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p), - CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk), -}; - -void __init s3c2410_init_clocks(int xtal) -{ - s3c24xx_register_baseclocks(xtal); - s3c2410_setup_clocks(); - s3c2410_baseclk_add(); - s3c24xx_register_clock(&s3c2410_armclk); - clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup)); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } struct bus_type s3c2410_subsys = { diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c index 657cbaca80ac..d49f52fbc842 100644 --- a/arch/arm/mach-s3c24xx/s3c2412.c +++ b/arch/arm/mach-s3c24xx/s3c2412.c @@ -173,49 +173,6 @@ void __init s3c2412_map_io(void) void __init_or_cpufreq s3c2412_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long tmp; - unsigned long xtal; - unsigned long fclk; - unsigned long hclk; - unsigned long pclk; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - /* now we've got our machine bits initialised, work out what - * clocks we've got */ - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); - - clk_mpll.rate = fclk; - - tmp = __raw_readl(S3C2410_CLKDIVN); - - /* work out clock scalings */ - - hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1); - hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1); - pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brieft summary of clocks, etc */ - - printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c2412_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them - */ - - s3c24xx_register_baseclocks(xtal); - s3c2412_setup_clocks(); - s3c2412_baseclk_add(); } /* need to register the subsystem before we actually register the device, and diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c index 2c8adc028538..fb9da2b603a2 100644 --- a/arch/arm/mach-s3c24xx/s3c2442.c +++ b/arch/arm/mach-s3c24xx/s3c2442.c @@ -53,117 +53,6 @@ #include "common.h" -/* S3C2442 extended clock support */ - -static unsigned long s3c2442_camif_upll_round(struct clk *clk, - unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - int div; - - if (rate > parent_rate) - return parent_rate; - - div = parent_rate / rate; - - if (div == 3) - return parent_rate / 3; - - /* note, we remove the +/- 1 calculations for the divisor */ - - div /= 2; - - if (div < 1) - div = 1; - else if (div > 16) - div = 16; - - return parent_rate / (div * 2); -} - -static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk_get_rate(clk->parent); - unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN); - - rate = s3c2442_camif_upll_round(clk, rate); - - camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3; - - if (rate == parent_rate) { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL; - } else if ((parent_rate / rate) == 3) { - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3; - } else { - camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK; - camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL; - camdivn |= (((parent_rate / rate) / 2) - 1); - } - - __raw_writel(camdivn, S3C2440_CAMDIVN); - - return 0; -} - -/* Extra S3C2442 clocks */ - -static struct clk s3c2442_clk_cam = { - .name = "camif", - .id = -1, - .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, -}; - -static struct clk s3c2442_clk_cam_upll = { - .name = "camif-upll", - .id = -1, - .ops = &(struct clk_ops) { - .set_rate = s3c2442_camif_upll_setrate, - .round_rate = s3c2442_camif_upll_round, - }, -}; - -static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif) -{ - struct clk *clock_upll; - struct clk *clock_h; - struct clk *clock_p; - - clock_p = clk_get(NULL, "pclk"); - clock_h = clk_get(NULL, "hclk"); - clock_upll = clk_get(NULL, "upll"); - - if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) { - printk(KERN_ERR "S3C2442: Failed to get parent clocks\n"); - return -EINVAL; - } - - s3c2442_clk_cam.parent = clock_h; - s3c2442_clk_cam_upll.parent = clock_upll; - - s3c24xx_register_clock(&s3c2442_clk_cam); - s3c24xx_register_clock(&s3c2442_clk_cam_upll); - - clk_disable(&s3c2442_clk_cam); - - return 0; -} - -static struct subsys_interface s3c2442_clk_interface = { - .name = "s3c2442_clk", - .subsys = &s3c2442_subsys, - .add_dev = s3c2442_clk_add, -}; - -static __init int s3c2442_clk_init(void) -{ - return subsys_interface_register(&s3c2442_clk_interface); -} - -arch_initcall(s3c2442_clk_init); - - static struct device s3c2442_dev = { .bus = &s3c2442_subsys, }; diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c index fe30ebb234d2..4a64bcc9eb51 100644 --- a/arch/arm/mach-s3c24xx/s3c244x.c +++ b/arch/arm/mach-s3c24xx/s3c244x.c @@ -46,6 +46,7 @@ #include <plat/nand-core.h> #include <plat/watchdog-reset.h> +#include "common.h" #include "regs-dsc.h" static struct map_desc s3c244x_iodesc[] __initdata = { @@ -74,67 +75,11 @@ void __init s3c244x_map_io(void) s3c_nand_setname("s3c2440-nand"); s3c_device_ts.name = "s3c2440-ts"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; + s3c2410_device_dclk.name = "s3c2440-dclk"; } void __init_or_cpufreq s3c244x_setup_clocks(void) { - struct clk *xtal_clk; - unsigned long clkdiv; - unsigned long camdiv; - unsigned long xtal; - unsigned long hclk, fclk, pclk; - int hdiv = 1; - - xtal_clk = clk_get(NULL, "xtal"); - xtal = clk_get_rate(xtal_clk); - clk_put(xtal_clk); - - fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; - - clkdiv = __raw_readl(S3C2410_CLKDIVN); - camdiv = __raw_readl(S3C2440_CAMDIVN); - - /* work out clock scalings */ - - switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) { - case S3C2440_CLKDIVN_HDIVN_1: - hdiv = 1; - break; - - case S3C2440_CLKDIVN_HDIVN_2: - hdiv = 2; - break; - - case S3C2440_CLKDIVN_HDIVN_4_8: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4; - break; - - case S3C2440_CLKDIVN_HDIVN_3_6: - hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3; - break; - } - - hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); - - /* print brief summary of clocks, etc */ - - printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", - print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); - - s3c24xx_setup_clocks(fclk, hclk, pclk); -} - -void __init s3c244x_init_clocks(int xtal) -{ - /* initialise the clocks here, to allow other things like the - * console to use them, and to add new ones after the initialisation - */ - - s3c24xx_register_baseclocks(xtal); - s3c244x_setup_clocks(); - s3c2410_baseclk_add(); - samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG); } /* Since the S3C2442 and S3C2440 share items, put both subsystems here */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b41a38a75844..6c719eccb94e 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -49,11 +49,6 @@ #include <plat/clock.h> #include <plat/samsung-time.h> #include <plat/mfc.h> -#include <plat/camport.h> - -#include <media/v4l2-mediabus.h> -#include <media/s5p_fimc.h> -#include <media/noon010pc30.h> #include "common.h" @@ -285,14 +280,6 @@ static void __init goni_tsp_init(void) /* USB OTG */ static struct s3c_hsotg_plat goni_hsotg_pdata; -static void goni_camera_init(void) -{ - s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); - - /* Set max driver strength on CAM_A_CLKOUT pin. */ - s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); -} - /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -825,34 +812,6 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; -static struct noon010pc30_platform_data noon010pc30_pldata = { - .clk_rate = 16000000UL, - .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ - .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ -}; - -static struct i2c_board_info noon010pc30_board_info = { - I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), - .platform_data = &noon010pc30_pldata, -}; - -static struct fimc_source_info goni_camera_sensors[] = { - { - .mux_id = 0, - .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | - V4L2_MBUS_VSYNC_ACTIVE_LOW, - .fimc_bus_type = FIMC_BUS_TYPE_ITU_601, - .board_info = &noon010pc30_board_info, - .i2c_bus_num = 0, - .clk_frequency = 16000000UL, - }, -}; - -static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { - .source_info = goni_camera_sensors, - .num_clients = ARRAY_SIZE(goni_camera_sensors), -}; - /* Audio device */ static struct platform_device goni_device_audio = { .name = "smdk-audio", @@ -874,10 +833,6 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mixer, &s5p_device_sdo, &s3c_device_i2c0, - &s5p_device_fimc0, - &s5p_device_fimc1, - &s5p_device_fimc2, - &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -946,14 +901,8 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); - /* FIMC */ - s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), - &s5p_device_fimc_md); - s3c_hsotg_set_platdata(&goni_hsotg_pdata); - goni_camera_init(); - /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0f92ba8e7884..dbd954e61aa7 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -8,7 +8,6 @@ config ARCH_SHMOBILE_MULTI select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ARM_GIC - select MIGHT_HAVE_PCI select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL @@ -108,6 +107,7 @@ config ARCH_R8A7778 select SH_CLK_CPG select ARM_GIC select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -140,16 +140,6 @@ config ARCH_R8A7791 select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_EMEV2 - bool "Emma Mobile EV2" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select CPU_V7 - select MIGHT_HAVE_PCI - select USE_OF - select AUTO_ZRELADDR - select SYS_SUPPORTS_EM_STI - config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -205,8 +195,8 @@ config MACH_ARMADILLO800EVA_REFERENCE select SND_SOC_WM8978 if SND_SIMPLE_CARD select USE_OF ---help--- - Use reference implementation of Aramdillo800 EVA board support - which makes a greater use of device tree at the expense + Use reference implementation of Armadillo800 EVA board support + which makes greater use of device tree at the expense of not supporting a number of devices. This is intended to aid developers @@ -216,7 +206,6 @@ config MACH_BOCKW depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select RENESAS_INTC_IRQPIN select SND_SOC_AK4554 if SND_SIMPLE_CARD select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF @@ -225,7 +214,6 @@ config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB - select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF ---help--- @@ -240,17 +228,6 @@ config MACH_GENMAI depends on ARCH_R7S72100 select USE_OF -config MACH_GENMAI_REFERENCE - bool "Genmai board - Reference Device Tree Implementation" - depends on ARCH_R7S72100 - select USE_OF - ---help--- - Use reference implementation of Genmai board support - which makes use of device tree at the expense - of not supporting a number of devices. - - This is intended to aid developers - config MACH_MARZEN bool "MARZEN board" depends on ARCH_R8A7779 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 4caffc912a81..38d5fe825e93 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects -ifndef CONFIG_COMMON_CLK obj-y += clock.o +ifndef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o @@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o -obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif @@ -67,7 +66,6 @@ obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o obj-$(CONFIG_MACH_BOCKW) += board-bockw.o obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o obj-$(CONFIG_MACH_GENMAI) += board-genmai.o -obj-$(CONFIG_MACH_GENMAI_REFERENCE) += board-genmai-reference.o obj-$(CONFIG_MACH_MARZEN) += board-marzen.o obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o obj-$(CONFIG_MACH_LAGER) += board-lager.o diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot index 99455ecafa05..918fccffa1b6 100644 --- a/arch/arm/mach-shmobile/Makefile.boot +++ b/arch/arm/mach-shmobile/Makefile.boot @@ -7,7 +7,6 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000 loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000 loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000 -loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000 diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 39e11f48e8bc..f660fbb96e0b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index f8e25fd29b79..01f81100c330 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1017,7 +1017,7 @@ static struct asoc_simple_card_info fsi2_hdmi_info = { .platform = "sh_fsi2", .cpu_dai = { .name = "fsib-dai", - .fmt = SND_SOC_DAIFMT_CBM_CFM, + .fmt = SND_SOC_DAIFMT_CBS_CFS, }, .codec_dai = { .name = "sh_mobile_hdmi-hifi", @@ -1300,11 +1300,6 @@ static void __init eva_earlytimer_init(void) eva_clock_init(); } -static void __init eva_add_early_devices(void) -{ - r8a7740_add_early_devices(); -} - #define RESCNT2 IOMEM(0xe6188020) static void eva_restart(enum reboot_mode mode, const char *cmd) { @@ -1319,7 +1314,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .map_io = r8a7740_map_io, - .init_early = eva_add_early_devices, + .init_early = r8a7740_add_early_devices, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index b4122f8cb8d9..f444be2f241e 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -345,24 +345,39 @@ static struct rsnd_ssi_platform_info rsnd_ssi[] = { RSND_SSI_UNUSED, /* SSI 0 */ RSND_SSI_UNUSED, /* SSI 1 */ RSND_SSI_UNUSED, /* SSI 2 */ - RSND_SSI_SET(1, HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), RSND_SSI_PLAY), - RSND_SSI_SET(2, HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), - RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), RSND_SSI_PLAY), - RSND_SSI_SET(0, HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), - RSND_SSI_SET(3, HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), RSND_SSI_PLAY), - RSND_SSI_SET(4, HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(HPBDMA_SLAVE_HPBIF3_TX, gic_iid(0x85), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF4_RX, gic_iid(0x85), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(HPBDMA_SLAVE_HPBIF5_TX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF6_RX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF7_TX, gic_iid(0x86), 0), + RSND_SSI(HPBDMA_SLAVE_HPBIF8_RX, gic_iid(0x86), RSND_SSI_CLK_PIN_SHARE), }; -static struct rsnd_scu_platform_info rsnd_scu[9] = { - { .flags = 0, }, /* SRU 0 */ - { .flags = 0, }, /* SRU 1 */ - { .flags = 0, }, /* SRU 2 */ - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, - { .flags = RSND_SCU_USE_HPBIF, }, +static struct rsnd_src_platform_info rsnd_src[9] = { + RSND_SRC_UNUSED, /* SRU 0 */ + RSND_SRC_UNUSED, /* SRU 1 */ + RSND_SRC_UNUSED, /* SRU 2 */ + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), + RSND_SRC(0, 0), +}; + +static struct rsnd_dai_platform_info rsnd_dai[] = { + { + .playback = { .ssi = &rsnd_ssi[5], .src = &rsnd_src[5] }, + .capture = { .ssi = &rsnd_ssi[6], .src = &rsnd_src[6] }, + }, { + .playback = { .ssi = &rsnd_ssi[3], .src = &rsnd_src[3] }, + }, { + .capture = { .ssi = &rsnd_ssi[4], .src = &rsnd_src[4] }, + }, { + .playback = { .ssi = &rsnd_ssi[7], .src = &rsnd_src[7] }, + }, { + .capture = { .ssi = &rsnd_ssi[8], .src = &rsnd_src[8] }, + }, }; enum { @@ -437,8 +452,10 @@ static struct rcar_snd_info rsnd_info = { .flags = RSND_GEN1, .ssi_info = rsnd_ssi, .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .scu_info = rsnd_scu, - .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .src_info = rsnd_src, + .src_info_nr = ARRAY_SIZE(rsnd_src), + .dai_info = rsnd_dai, + .dai_info_nr = ARRAY_SIZE(rsnd_dai), .start = rsnd_start, .stop = rsnd_stop, }; @@ -591,6 +608,7 @@ static void __init bockw_init(void) { void __iomem *base; struct clk *clk; + struct platform_device *pdev; int i; r8a7778_clock_init(); @@ -673,9 +691,6 @@ static void __init bockw_init(void) } /* for Audio */ - clk = clk_get(NULL, "audio_clk_b"); - clk_set_rate(clk, 24576000); - clk_put(clk); rsnd_codec_power(5, 1); /* enable ak4642 */ platform_device_register_simple( @@ -684,11 +699,15 @@ static void __init bockw_init(void) platform_device_register_simple( "ak4554-adc-dac", 1, NULL, 0); - platform_device_register_resndata( + pdev = platform_device_register_resndata( &platform_bus, "rcar_sound", -1, rsnd_resources, ARRAY_SIZE(rsnd_resources), &rsnd_info, sizeof(rsnd_info)); + clk = clk_get(&pdev->dev, "clk_b"); + clk_set_rate(clk, 24576000); + clk_put(clk); + for (i = 0; i < ARRAY_SIZE(rsnd_card_info); i++) { struct platform_device_info cardinfo = { .parent = &platform_bus, diff --git a/arch/arm/mach-shmobile/board-genmai-reference.c b/arch/arm/mach-shmobile/board-genmai-reference.c index 7630c1053e32..2ff6ad6e608e 100644 --- a/arch/arm/mach-shmobile/board-genmai-reference.c +++ b/arch/arm/mach-shmobile/board-genmai-reference.c @@ -18,27 +18,31 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk-provider.h> #include <linux/kernel.h> #include <linux/of_platform.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/r7s72100.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] = { + { "mtu2", "fck", "sh-mtu2" }, +}; + static void __init genmai_add_standard_devices(void) { -#ifdef CONFIG_COMMON_CLK - of_clk_init(NULL); -#else - r7s72100_clock_init(); -#endif + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), true); r7s72100_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const genmai_boards_compat_dt[] __initconst = { - "renesas,genmai-reference", + "renesas,genmai", NULL, }; diff --git a/arch/arm/mach-shmobile/board-genmai.c b/arch/arm/mach-shmobile/board-genmai.c index 6c328d63b819..c94201ee8596 100644 --- a/arch/arm/mach-shmobile/board-genmai.c +++ b/arch/arm/mach-shmobile/board-genmai.c @@ -21,6 +21,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/serial_sci.h> #include <linux/sh_eth.h> #include <linux/spi/rspi.h> #include <linux/spi/spi.h> @@ -89,6 +90,40 @@ static const struct spi_board_info spi_info[] __initconst = { }, }; +/* SCIF */ +#define R7S72100_SCIF(index, baseaddr, irq) \ +static const struct plat_sci_port scif##index##_platform_data = { \ + .type = PORT_SCIF, \ + .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ + .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ + SCSCR_REIE, \ +}; \ + \ +static struct resource scif##index##_resources[] = { \ + DEFINE_RES_MEM(baseaddr, 0x100), \ + DEFINE_RES_IRQ(irq + 1), \ + DEFINE_RES_IRQ(irq + 2), \ + DEFINE_RES_IRQ(irq + 3), \ + DEFINE_RES_IRQ(irq), \ +} \ + +R7S72100_SCIF(0, 0xe8007000, gic_iid(221)); +R7S72100_SCIF(1, 0xe8007800, gic_iid(225)); +R7S72100_SCIF(2, 0xe8008000, gic_iid(229)); +R7S72100_SCIF(3, 0xe8008800, gic_iid(233)); +R7S72100_SCIF(4, 0xe8009000, gic_iid(237)); +R7S72100_SCIF(5, 0xe8009800, gic_iid(241)); +R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); +R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); + +#define r7s72100_register_scif(index) \ + platform_device_register_resndata(&platform_bus, "sh-sci", index, \ + scif##index##_resources, \ + ARRAY_SIZE(scif##index##_resources), \ + &scif##index##_platform_data, \ + sizeof(scif##index##_platform_data)) + static void __init genmai_add_standard_devices(void) { r7s72100_clock_init(); @@ -102,6 +137,15 @@ static void __init genmai_add_standard_devices(void) r7s72100_register_rspi(3); r7s72100_register_rspi(4); spi_register_board_info(spi_info, ARRAY_SIZE(spi_info)); + + r7s72100_register_scif(0); + r7s72100_register_scif(1); + r7s72100_register_scif(2); + r7s72100_register_scif(3); + r7s72100_register_scif(4); + r7s72100_register_scif(5); + r7s72100_register_scif(6); + r7s72100_register_scif(7); } static const char * const genmai_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index a3fd30242bd8..d322a162b4b0 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -19,12 +19,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk.h> -#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/rcar-gen2.h> @@ -82,49 +81,35 @@ static void __init koelsch_add_du_device(void) platform_device_register_full(&info); } -static void __init koelsch_add_standard_devices(void) -{ - /* - * This is a really crude hack to provide clkdev support to the CMT and - * DU devices until they get moved to DT. - */ - static const struct clk_name { - const char *clk; - const char *con_id; - const char *dev_id; - } clk_names[] = { - { "cmt0", NULL, "sh_cmt.0" }, - { "scifa0", NULL, "sh-sci.0" }, - { "scifa1", NULL, "sh-sci.1" }, - { "scifb0", NULL, "sh-sci.2" }, - { "scifb1", NULL, "sh-sci.3" }, - { "scifb2", NULL, "sh-sci.4" }, - { "scifa2", NULL, "sh-sci.5" }, - { "scif0", NULL, "sh-sci.6" }, - { "scif1", NULL, "sh-sci.7" }, - { "scif2", NULL, "sh-sci.8" }, - { "scif3", NULL, "sh-sci.9" }, - { "scif4", NULL, "sh-sci.10" }, - { "scif5", NULL, "sh-sci.11" }, - { "scifa3", NULL, "sh-sci.12" }, - { "scifa4", NULL, "sh-sci.13" }, - { "scifa5", NULL, "sh-sci.14" }, - { "du0", "du.0", "rcar-du-r8a7791" }, - { "du1", "du.1", "rcar-du-r8a7791" }, - { "lvds0", "lvds.0", "rcar-du-r8a7791" }, - }; - struct clk *clk; - unsigned int i; +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] __initconst = { + { "cmt0", "fck", "sh-cmt-48-gen2.0" }, + { "du0", "du.0", "rcar-du-r8a7791" }, + { "du1", "du.1", "rcar-du-r8a7791" }, + { "lvds0", "lvds.0", "rcar-du-r8a7791" }, +}; - for (i = 0; i < ARRAY_SIZE(clk_names); ++i) { - clk = clk_get(NULL, clk_names[i].clk); - if (!IS_ERR(clk)) { - clk_register_clkdev(clk, clk_names[i].con_id, - clk_names[i].dev_id); - clk_put(clk); - } - } +/* + * This is a really crude hack to work around core platform clock issues + */ +static const struct clk_name clk_enables[] __initconst = { + { "ether", NULL, "ee700000.ethernet" }, + { "i2c2", NULL, "e6530000.i2c" }, + { "msiof0", NULL, "e6e20000.spi" }, + { "qspi_mod", NULL, "e6b10000.spi" }, + { "sdhi0", NULL, "ee100000.sd" }, + { "sdhi1", NULL, "ee140000.sd" }, + { "sdhi2", NULL, "ee160000.sd" }, + { "thermal", NULL, "e61f0000.thermal" }, +}; +static void __init koelsch_add_standard_devices(void) +{ + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); + shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7791_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -139,7 +124,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_add_standard_devices, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 5a034ff405d0..c6c68892caa3 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -216,7 +216,7 @@ static const struct spi_board_info spi_info[] __initconst = { { .modalias = "m25p80", .platform_data = &spi_flash_data, - .mode = SPI_MODE_0, + .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, .max_speed_hz = 30000000, .bus_num = 0, .chip_select = 0, @@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-lager-reference.c b/arch/arm/mach-shmobile/board-lager-reference.c index 440aac36d693..749832e3f33c 100644 --- a/arch/arm/mach-shmobile/board-lager-reference.c +++ b/arch/arm/mach-shmobile/board-lager-reference.c @@ -18,12 +18,11 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <linux/clk.h> -#include <linux/clkdev.h> #include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/of_platform.h> #include <linux/platform_data/rcar-du.h> +#include <mach/clock.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/rcar-gen2.h> @@ -86,46 +85,36 @@ static void __init lager_add_du_device(void) platform_device_register_full(&info); } -static void __init lager_add_standard_devices(void) -{ - /* - * This is a really crude hack to provide clkdev support to platform - * devices until they get moved to DT. - */ - static const struct clk_name { - const char *clk; - const char *con_id; - const char *dev_id; - } clk_names[] = { - { "cmt0", NULL, "sh_cmt.0" }, - { "scifa0", NULL, "sh-sci.0" }, - { "scifa1", NULL, "sh-sci.1" }, - { "scifb0", NULL, "sh-sci.2" }, - { "scifb1", NULL, "sh-sci.3" }, - { "scifb2", NULL, "sh-sci.4" }, - { "scifa2", NULL, "sh-sci.5" }, - { "scif0", NULL, "sh-sci.6" }, - { "scif1", NULL, "sh-sci.7" }, - { "hscif0", NULL, "sh-sci.8" }, - { "hscif1", NULL, "sh-sci.9" }, - { "du0", "du.0", "rcar-du-r8a7790" }, - { "du1", "du.1", "rcar-du-r8a7790" }, - { "du2", "du.2", "rcar-du-r8a7790" }, - { "lvds0", "lvds.0", "rcar-du-r8a7790" }, - { "lvds1", "lvds.1", "rcar-du-r8a7790" }, - }; - struct clk *clk; - unsigned int i; +/* + * This is a really crude hack to provide clkdev support to platform + * devices until they get moved to DT. + */ +static const struct clk_name clk_names[] __initconst = { + { "cmt0", "fck", "sh-cmt-48-gen2.0" }, + { "du0", "du.0", "rcar-du-r8a7790" }, + { "du1", "du.1", "rcar-du-r8a7790" }, + { "du2", "du.2", "rcar-du-r8a7790" }, + { "lvds0", "lvds.0", "rcar-du-r8a7790" }, + { "lvds1", "lvds.1", "rcar-du-r8a7790" }, +}; - for (i = 0; i < ARRAY_SIZE(clk_names); ++i) { - clk = clk_get(NULL, clk_names[i].clk); - if (!IS_ERR(clk)) { - clk_register_clkdev(clk, clk_names[i].con_id, - clk_names[i].dev_id); - clk_put(clk); - } - } +/* + * This is a really crude hack to work around core platform clock issues + */ +static const struct clk_name clk_enables[] __initconst = { + { "ether", NULL, "ee700000.ethernet" }, + { "msiof1", NULL, "e6e10000.spi" }, + { "mmcif1", NULL, "ee220000.mmc" }, + { "qspi_mod", NULL, "e6b10000.spi" }, + { "sdhi0", NULL, "ee100000.sd" }, + { "sdhi2", NULL, "ee140000.sd" }, + { "thermal", NULL, "e61f0000.thermal" }, +}; +static void __init lager_add_standard_devices(void) +{ + shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false); + shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true); r8a7790_add_dt_devices(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index 18c7e0311aa6..f8b1e05463cc 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -325,12 +325,12 @@ static const struct rspi_plat_data qspi_pdata __initconst = { static const struct spi_board_info spi_info[] __initconst = { { - .modalias = "m25p80", - .platform_data = &spi_flash_data, - .mode = SPI_MODE_0, - .max_speed_hz = 30000000, - .bus_num = 0, - .chip_select = 0, + .modalias = "m25p80", + .platform_data = &spi_flash_data, + .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD, + .max_speed_hz = 30000000, + .bus_num = 0, + .chip_select = 0, }, }; @@ -567,20 +567,27 @@ static struct resource rsnd_resources[] __initdata = { }; static struct rsnd_ssi_platform_info rsnd_ssi[] = { - RSND_SSI_SET(0, 0, gic_spi(370), RSND_SSI_PLAY), - RSND_SSI_SET(0, 0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), + RSND_SSI(0, gic_spi(370), 0), + RSND_SSI(0, gic_spi(371), RSND_SSI_CLK_PIN_SHARE), }; -static struct rsnd_scu_platform_info rsnd_scu[2] = { +static struct rsnd_src_platform_info rsnd_src[2] = { /* no member at this point */ }; +static struct rsnd_dai_platform_info rsnd_dai = { + .playback = { .ssi = &rsnd_ssi[0], }, + .capture = { .ssi = &rsnd_ssi[1], }, +}; + static struct rcar_snd_info rsnd_info = { .flags = RSND_GEN2, .ssi_info = rsnd_ssi, .ssi_info_nr = ARRAY_SIZE(rsnd_ssi), - .scu_info = rsnd_scu, - .scu_info_nr = ARRAY_SIZE(rsnd_scu), + .src_info = rsnd_src, + .src_info_nr = ARRAY_SIZE(rsnd_src), + .dai_info = &rsnd_dai, + .dai_info_nr = 1, }; static struct asoc_simple_card_info rsnd_card_info = { diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c deleted file mode 100644 index 5ac13ba71d54..000000000000 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Emma Mobile EV2 clock framework support - * - * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -#define EMEV2_SMU_BASE 0xe0110000 - -/* EMEV2 SMU registers */ -#define USIAU0_RSTCTRL 0x094 -#define USIBU1_RSTCTRL 0x0ac -#define USIBU2_RSTCTRL 0x0b0 -#define USIBU3_RSTCTRL 0x0b4 -#define STI_RSTCTRL 0x124 -#define USIAU0GCLKCTRL 0x4a0 -#define USIBU1GCLKCTRL 0x4b8 -#define USIBU2GCLKCTRL 0x4bc -#define USIBU3GCLKCTRL 0x04c0 -#define STIGCLKCTRL 0x528 -#define USIAU0SCLKDIV 0x61c -#define USIB2SCLKDIV 0x65c -#define USIB3SCLKDIV 0x660 -#define STI_CLKSEL 0x688 - -/* not pretty, but hey */ -static void __iomem *smu_base; - -static void emev2_smu_write(unsigned long value, int offs) -{ - BUG_ON(!smu_base || (offs >= PAGE_SIZE)); - iowrite32(value, smu_base + offs); -} - -static struct clk_mapping smu_mapping = { - .phys = EMEV2_SMU_BASE, - .len = PAGE_SIZE, -}; - -/* Fixed 32 KHz root clock from C32K pin */ -static struct clk c32k_clk = { - .rate = 32768, - .mapping = &smu_mapping, -}; - -/* PLL3 multiplies C32K with 7000 */ -static unsigned long pll3_recalc(struct clk *clk) -{ - return clk->parent->rate * 7000; -} - -static struct sh_clk_ops pll3_clk_ops = { - .recalc = pll3_recalc, -}; - -static struct clk pll3_clk = { - .ops = &pll3_clk_ops, - .parent = &c32k_clk, -}; - -static struct clk *main_clks[] = { - &c32k_clk, - &pll3_clk, -}; - -enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, - SCLKDIV_NR }; - -#define SCLKDIV(_reg, _shift) \ -{ \ - .parent = &pll3_clk, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = _shift, \ -} - -static struct clk sclkdiv_clks[SCLKDIV_NR] = { - [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), - [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), - [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), - [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), -}; - -enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, - GCLK_STI_SCLK, - GCLK_NR }; - -#define GCLK_SCLK(_parent, _reg) \ -{ \ - .parent = _parent, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = 1, /* SCLK_GCC */ \ -} - -static struct clk gclk_clks[GCLK_NR] = { - [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], - USIAU0GCLKCTRL), - [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], - USIBU1GCLKCTRL), - [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], - USIBU2GCLKCTRL), - [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], - USIBU3GCLKCTRL), - [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), -}; - -static int emev2_gclk_enable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), - clk->mapped_reg); - return 0; -} - -static void emev2_gclk_disable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), - clk->mapped_reg); -} - -static struct sh_clk_ops emev2_gclk_clk_ops = { - .enable = emev2_gclk_enable, - .disable = emev2_gclk_disable, - .recalc = followparent_recalc, -}; - -static int __init emev2_gclk_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_gclk_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static unsigned long emev2_sclkdiv_recalc(struct clk *clk) -{ - unsigned int sclk_div; - - sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; - - return clk->parent->rate / (sclk_div + 1); -} - -static struct sh_clk_ops emev2_sclkdiv_clk_ops = { - .recalc = emev2_sclkdiv_recalc, -}; - -static int __init emev2_sclkdiv_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_sclkdiv_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static struct clk_lookup lookups[] = { - CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), - CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]), -}; - -void __init emev2_clock_init(void) -{ - int k, ret = 0; - - smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); - BUG_ON(!smu_base); - - /* setup STI timer to run on 32.768 kHz and deassert reset */ - emev2_smu_write(0, STI_CLKSEL); - emev2_smu_write(1, STI_RSTCTRL); - - /* deassert reset for UART0->UART3 */ - emev2_smu_write(2, USIAU0_RSTCTRL); - emev2_smu_write(2, USIBU1_RSTCTRL); - emev2_smu_write(2, USIBU2_RSTCTRL); - emev2_smu_write(2, USIBU3_RSTCTRL); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); - - if (!ret) - ret = emev2_gclk_register(gclk_clks, GCLK_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup emev2 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-r7s72100.c b/arch/arm/mach-shmobile/clock-r7s72100.c index bee0073c9b64..df187484de5d 100644 --- a/arch/arm/mach-shmobile/clock-r7s72100.c +++ b/arch/arm/mach-shmobile/clock-r7s72100.c @@ -194,17 +194,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]), CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]), CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]), - CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]), - CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]), - CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]), - CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]), - CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]), - CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]), - CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]), - CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]), - CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]), CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]), - CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]), /* ICK */ CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP47]), @@ -215,6 +205,7 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), + CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP33]), }; void __init r7s72100_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 7348d58f500e..b5bc22c6a858 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -597,7 +597,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), CLKDEV_DEV_ID("e6510000.i2c", &mstp_clks[MSTP323]), - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.1", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("e60b0000.i2c", &mstp_clks[MSTP409]), CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP410]), CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP411]), diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index dd989f93498f..50931e3c97c7 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -548,15 +548,9 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), - CLKDEV_DEV_ID("sh_tmu.3", &mstp_clks[MSTP111]), - CLKDEV_DEV_ID("sh_tmu.4", &mstp_clks[MSTP111]), - CLKDEV_DEV_ID("sh_tmu.5", &mstp_clks[MSTP111]), CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("fff20000.i2c", &mstp_clks[MSTP116]), CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), - CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP125]), CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[MSTP128]), @@ -583,7 +577,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]), CLKDEV_DEV_ID("e6cc0000.sci", &mstp_clks[MSTP230]), - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("fe1f0000.sound", &mstp_clks[MSTP328]), CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), @@ -596,7 +589,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), - CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), @@ -604,6 +597,9 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6870000.sd", &mstp_clks[MSTP415]), /* ICK */ + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP111]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), + CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), CLKDEV_ICK_ID("func", "renesas_usbhs", &mstp_clks[MSTP407]), CLKDEV_ICK_ID("phy", "renesas_usbhs", &mstp_clks[MSTP406]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 9989b1b06ffd..13f8f3ab8840 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -175,10 +175,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -211,8 +207,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */ CLKDEV_DEV_ID("sh-hspi.0", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("fffc7000.spi", &mstp_clks[MSTP007]), /* HSPI0 */ CLKDEV_DEV_ID("sh-hspi.1", &mstp_clks[MSTP007]), /* HSPI1 */ @@ -234,15 +228,17 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index 8e403ae0c7b2..a13298bd37a8 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -173,9 +173,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */ CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */ CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */ - CLKDEV_DEV_ID("sh_tmu.2", &mstp_clks[MSTP016]), /* TMU02 */ + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), /* TMU0 */ CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("ffc70000.i2c", &mstp_clks[MSTP030]), /* I2C0 */ CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP029]), /* I2C1 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 3f93503f5b96..296a057109e4 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -249,10 +249,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -294,10 +294,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &m2_clk), CLKDEV_CON_ID("extal", &extal_clk), CLKDEV_CON_ID("extal_div2", &extal_div2_clk), CLKDEV_CON_ID("main", &main_clk), @@ -361,7 +357,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]), CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]), @@ -371,6 +366,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]), /* ICK */ + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]), CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]), CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7790", &mstp_clks[MSTP726]), CLKDEV_ICK_ID("lvds.1", "rcar-du-r8a7790", &mstp_clks[MSTP725]), @@ -381,16 +377,16 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]), - CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]), + CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]), CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]), CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]), CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]), diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 701383fe3267..e2fdfcc14436 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -25,6 +25,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/rcar-gen2.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -43,8 +44,6 @@ * see "p1 / 2" on R8A7791_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 @@ -68,7 +67,6 @@ #define MSTPSR9 IOMEM(0xe61509a4) #define MSTPSR11 IOMEM(0xe61509ac) -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026c @@ -190,12 +188,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ - [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ - [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ + [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -266,7 +264,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), - CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), + CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]), @@ -295,14 +293,9 @@ static struct clk_lookup lookups[] = { void __init r8a7791_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 28489978b09c..d16d9ca7f79e 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -515,8 +515,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ @@ -565,10 +563,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ - CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ - CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ - CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ /* ICK */ CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), @@ -580,7 +575,11 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */ CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.3", &mstp_clks[MSTP404]), /* CMT3 */ + CLKDEV_ICK_ID("fck", "sh-cmt-32-fast.2", &mstp_clks[MSTP400]), /* CMT2 */ CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]), CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]), CLKDEV_ICK_ID("xcka", "sh_fsi2", &fsiack_clk), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 23edf8360c27..0d9cd1fe0212 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -633,8 +633,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-csi2.1", &mstp_clks[MSTP128]), /* CSI2-RX1 */ CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU0 */ CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2-RX0 */ - CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */ - CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */ CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("e6820000.i2c", &mstp_clks[MSTP116]), /* I2C0 */ @@ -650,7 +648,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ @@ -683,6 +680,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), + CLKDEV_ICK_ID("fck", "sh-cmt-48.1", &mstp_clks[MSTP329]), /* CMT1 */ + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP125]), /* TMU0 */ }; void __init sh73a0_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index ad7df629d995..e7232a0373b9 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -21,6 +21,32 @@ */ #include <linux/kernel.h> #include <linux/init.h> + +#ifdef CONFIG_COMMON_CLK +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> + +void __init shmobile_clk_workaround(const struct clk_name *clks, + int nr_clks, bool enable) +{ + const struct clk_name *clkn; + struct clk *clk; + unsigned int i; + + for (i = 0; i < nr_clks; ++i) { + clkn = clks + i; + clk = clk_get(NULL, clkn->clk); + if (!IS_ERR(clk)) { + clk_register_clkdev(clk, clkn->con_id, clkn->dev_id); + if (enable) + clk_prepare_enable(clk); + clk_put(clk); + } + } +} + +#else /* CONFIG_COMMON_CLK */ #include <linux/sh_clk.h> #include <linux/export.h> #include <mach/clock.h> @@ -58,3 +84,5 @@ void __clk_put(struct clk *clk) { } EXPORT_SYMBOL(__clk_put); + +#endif /* CONFIG_COMMON_CLK */ diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h index 03e56074928c..31b6417463e6 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -1,6 +1,22 @@ #ifndef CLOCK_H #define CLOCK_H +#ifdef CONFIG_COMMON_CLK +/* temporary clock configuration helper for platform devices */ + +struct clk_name { + const char *clk; + const char *con_id; + const char *dev_id; +}; + +void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks, + bool enable); + +#else /* CONFIG_COMMON_CLK */ +/* legacy clock implementation */ + +struct clk; unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; @@ -36,4 +52,5 @@ do { \ (p)->div = d; \ } while (0) +#endif /* CONFIG_COMMON_CLK */ #endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index cb8e32deb2a3..f7a360edcc35 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,6 +4,7 @@ extern void shmobile_earlytimer_init(void); extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); +extern void shmobile_init_delay(void); struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h deleted file mode 100644 index fcb142a14e07..000000000000 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_EMEV2_H__ -#define __ASM_EMEV2_H__ - -extern void emev2_map_io(void); -extern void emev2_init_delay(void); -extern void emev2_clock_init(void); -extern struct smp_operations emev2_smp_ops; - -#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index d07932f872b6..5e3c9ec06303 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -47,7 +47,6 @@ enum { }; extern void r8a7740_meram_workaround(void); -extern void r8a7740_init_delay(void); extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 200fa699f730..664274cc4b64 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); -void r8a7791_init_early(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 1fc05d9453d0..f710235aff2f 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd) static bool rmobile_pd_active_wakeup(struct device *dev) { - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int rmobile_pd_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int rmobile_pd_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; + return true; } static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) @@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct dev_power_governor *gov = rmobile_pd->gov; pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = rmobile_pd_stop_dev; - genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.stop = pm_clk_suspend; + genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->dev_irq_safe = true; genpd->power_off = rmobile_pd_power_down; diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c71d667007b8..d953ff6e78a2 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = { #endif }; -void __init emev2_map_io(void) +static void __init emev2_map_io(void) { iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } static void __init emev2_add_standard_devices_dt(void) { -#ifdef CONFIG_COMMON_CLK of_clk_init(NULL); -#else - emev2_clock_init(); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = { NULL, }; +extern struct smp_operations emev2_smp_ops; + DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, diff --git a/arch/arm/mach-shmobile/setup-r7s72100.c b/arch/arm/mach-shmobile/setup-r7s72100.c index 9c0b3a9d5f7a..412e179429cd 100644 --- a/arch/arm/mach-shmobile/setup-r7s72100.c +++ b/arch/arm/mach-shmobile/setup-r7s72100.c @@ -21,77 +21,26 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/of_platform.h> -#include <linux/serial_sci.h> #include <linux/sh_timer.h> #include <mach/common.h> #include <mach/irqs.h> #include <mach/r7s72100.h> #include <asm/mach/arch.h> -#define R7S72100_SCIF(index, baseaddr, irq) \ -static const struct plat_sci_port scif##index##_platform_data = { \ - .type = PORT_SCIF, \ - .regtype = SCIx_SH2_SCIF_FIFODATA_REGTYPE, \ - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \ - .scscr = SCSCR_RIE | SCSCR_TIE | SCSCR_RE | SCSCR_TE | \ - SCSCR_REIE, \ -}; \ - \ -static struct resource scif##index##_resources[] = { \ - DEFINE_RES_MEM(baseaddr, 0x100), \ - DEFINE_RES_IRQ(irq + 1), \ - DEFINE_RES_IRQ(irq + 2), \ - DEFINE_RES_IRQ(irq + 3), \ - DEFINE_RES_IRQ(irq), \ -} \ - -R7S72100_SCIF(0, 0xe8007000, gic_iid(221)); -R7S72100_SCIF(1, 0xe8007800, gic_iid(225)); -R7S72100_SCIF(2, 0xe8008000, gic_iid(229)); -R7S72100_SCIF(3, 0xe8008800, gic_iid(233)); -R7S72100_SCIF(4, 0xe8009000, gic_iid(237)); -R7S72100_SCIF(5, 0xe8009800, gic_iid(241)); -R7S72100_SCIF(6, 0xe800a000, gic_iid(245)); -R7S72100_SCIF(7, 0xe800a800, gic_iid(249)); - -#define r7s72100_register_scif(index) \ - platform_device_register_resndata(&platform_bus, "sh-sci", index, \ - scif##index##_resources, \ - ARRAY_SIZE(scif##index##_resources), \ - &scif##index##_platform_data, \ - sizeof(scif##index##_platform_data)) - - -static struct sh_timer_config mtu2_0_platform_data __initdata = { - .name = "MTU2_0", - .timer_bit = 0, - .channel_offset = -0x80, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] __initdata = { - DEFINE_RES_MEM(0xfcff0300, 0x27), - DEFINE_RES_IRQ(gic_iid(139)), /* MTU2 TGI0A */ +static struct resource mtu2_resources[] __initdata = { + DEFINE_RES_MEM(0xfcff0000, 0x400), + DEFINE_RES_IRQ_NAMED(gic_iid(139), "tgi0a"), }; -#define r7s72100_register_mtu2(idx) \ - platform_device_register_resndata(&platform_bus, "sh_mtu2", \ - idx, mtu2_##idx##_resources, \ - ARRAY_SIZE(mtu2_##idx##_resources), \ - &mtu2_##idx##_platform_data, \ - sizeof(struct sh_timer_config)) +#define r7s72100_register_mtu2() \ + platform_device_register_resndata(&platform_bus, "sh-mtu2", \ + -1, mtu2_resources, \ + ARRAY_SIZE(mtu2_resources), \ + NULL, 0) void __init r7s72100_add_dt_devices(void) { - r7s72100_register_scif(0); - r7s72100_register_scif(1); - r7s72100_register_scif(2); - r7s72100_register_scif(3); - r7s72100_register_scif(4); - r7s72100_register_scif(5); - r7s72100_register_scif(6); - r7s72100_register_scif(7); - r7s72100_register_mtu2(0); + r7s72100_register_mtu2(); } void __init r7s72100_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c index cd36f8078325..9333770cfac2 100644 --- a/arch/arm/mach-shmobile/setup-r8a73a4.c +++ b/arch/arm/mach-shmobile/setup-r8a73a4.c @@ -169,20 +169,17 @@ static const struct resource thermal0_resources[] = { thermal0_resources, \ ARRAY_SIZE(thermal0_resources)) -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0xff, }; -static struct resource cmt10_resources[] = { - DEFINE_RES_MEM(0xe6130010, 0x0c), - DEFINE_RES_MEM(0xe6130000, 0x04), - DEFINE_RES_IRQ(gic_spi(120)), /* CMT1_0 */ +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6130000, 0x1004), + DEFINE_RES_IRQ(gic_spi(120)), }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -196,7 +193,7 @@ void __init r8a73a4_add_dt_devices(void) r8a73a4_register_scif(3); r8a73a4_register_scif(4); r8a73a4_register_scif(5); - r8a7790_register_cmt(10); + r8a7790_register_cmt(1); } /* DMA */ diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 8f3c68101d59..35dec233301e 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -237,126 +237,45 @@ R8A7740_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(107)); R8A7740_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(108)); /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0x3f, }; -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(58), - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6138000, 0x170), + DEFINE_RES_IRQ(gic_spi(58)), }; -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, +static struct platform_device cmt1_device = { + .name = "sh-cmt-48", + .id = 1, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt1_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xfff80008, - .end = 0xfff80014 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(198), - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff80000, 0x2c), + DEFINE_RES_IRQ(gic_spi(198)), + DEFINE_RES_IRQ(gic_spi(199)), + DEFINE_RES_IRQ(gic_spi(200)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xfff80014, - .end = 0xfff80020 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(199), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), -}; - -static struct sh_timer_config tmu02_platform_data = { - .name = "TMU02", - .channel_offset = 0x1C, - .timer_bit = 2, - .clocksource_rating = 200, -}; - -static struct resource tmu02_resources[] = { - [0] = { - .name = "TMU02", - .start = 0xfff80020, - .end = 0xfff8002C - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(200), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu02_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu02_platform_data, - }, - .resource = tmu02_resources, - .num_resources = ARRAY_SIZE(tmu02_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* IPMMUI (an IPMMU module for ICB/LMB) */ @@ -400,7 +319,7 @@ static struct platform_device *r8a7740_devices_dt[] __initdata = { &scif6_device, &scif7_device, &scif8_device, - &cmt10_device, + &cmt1_device, }; static struct platform_device *r8a7740_early_devices[] __initdata = { @@ -408,9 +327,7 @@ static struct platform_device *r8a7740_early_devices[] __initdata = { &irqpin1_device, &irqpin2_device, &irqpin3_device, - &tmu00_device, - &tmu01_device, - &tmu02_device, + &tmu0_device, &ipmmu_device, }; @@ -765,7 +682,7 @@ static struct platform_device *r8a7740_late_devices[] __initdata = { * "Media RAM (MERAM)" on r8a7740 documentation */ #define MEBUFCNTR 0xFE950098 -void r8a7740_meram_workaround(void) +void __init r8a7740_meram_workaround(void) { void __iomem *reg; @@ -869,17 +786,6 @@ void __init r8a7740_add_early_devices(void) #ifdef CONFIG_USE_OF -void __init r8a7740_add_early_devices_dt(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ - - early_platform_add_devices(r8a7740_early_devices, - ARRAY_SIZE(r8a7740_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); -} - void __init r8a7740_add_standard_devices_dt(void) { platform_add_devices(r8a7740_devices_dt, @@ -887,11 +793,6 @@ void __init r8a7740_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -void __init r8a7740_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -}; - void __init r8a7740_init_irq_of(void) { void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); @@ -935,9 +836,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, + .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c index 6dd7ddf88741..d311ef903b39 100644 --- a/arch/arm/mach-shmobile/setup-r8a7778.c +++ b/arch/arm/mach-shmobile/setup-r8a7778.c @@ -71,33 +71,20 @@ R8A7778_SCIF(5, 0xffe45000, gic_iid(0x6b)); sizeof(scif##index##_platform_data)) /* TMU */ -static struct resource sh_tmu0_resources[] __initdata = { - DEFINE_RES_MEM(0xffd80008, 12), - DEFINE_RES_IRQ(gic_iid(0x40)), -}; - -static struct sh_timer_config sh_tmu0_platform_data __initdata = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config sh_tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource sh_tmu1_resources[] __initdata = { - DEFINE_RES_MEM(0xffd80014, 12), +static struct resource sh_tmu0_resources[] = { + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(gic_iid(0x40)), DEFINE_RES_IRQ(gic_iid(0x41)), -}; - -static struct sh_timer_config sh_tmu1_platform_data __initdata = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + DEFINE_RES_IRQ(gic_iid(0x42)), }; #define r8a7778_register_tmu(idx) \ platform_device_register_resndata( \ - &platform_bus, "sh_tmu", idx, \ + &platform_bus, "sh-tmu", idx, \ sh_tmu##idx##_resources, \ ARRAY_SIZE(sh_tmu##idx##_resources), \ &sh_tmu##idx##_platform_data, \ @@ -312,7 +299,6 @@ void __init r8a7778_add_dt_devices(void) r8a7778_register_scif(4); r8a7778_register_scif(5); r8a7778_register_tmu(0); - r8a7778_register_tmu(1); } /* HPB-DMA */ diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c index a6630fccfc45..aba4ed652d54 100644 --- a/arch/arm/mach-shmobile/setup-r8a7779.c +++ b/arch/arm/mach-shmobile/setup-r8a7779.c @@ -219,64 +219,25 @@ R8A7779_SCIF(4, 0xffe44000, gic_iid(0x7c)); R8A7779_SCIF(5, 0xffe45000, gic_iid(0x7d)); /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x40), - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(gic_iid(0x40)), + DEFINE_RES_IRQ(gic_iid(0x41)), + DEFINE_RES_IRQ(gic_iid(0x42)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_iid(0x41), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* I2C */ @@ -685,8 +646,7 @@ static struct platform_device *r8a7779_devices_dt[] __initdata = { &scif3_device, &scif4_device, &scif5_device, - &tmu00_device, - &tmu01_device, + &tmu0_device, }; static struct platform_device *r8a7779_standard_devices[] __initdata = { diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c4616f0698c6..6bd08b127fa4 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void) r8a7790_register_gpio(3); r8a7790_register_gpio(4); r8a7790_register_gpio(5); - r8a7790_register_i2c(0); - r8a7790_register_i2c(1); - r8a7790_register_i2c(2); - r8a7790_register_i2c(3); - r8a7790_register_audio_dmac(0); - r8a7790_register_audio_dmac(1); } #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \ @@ -269,20 +263,17 @@ static const struct resource thermal_resources[] __initconst = { thermal_resources, \ ARRAY_SIZE(thermal_resources)) -static const struct sh_timer_config cmt00_platform_data __initconst = { - .name = "CMT00", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt0_platform_data = { + .channels_mask = 0x60, }; -static const struct resource cmt00_resources[] __initconst = { - DEFINE_RES_MEM(0xffca0510, 0x0c), - DEFINE_RES_MEM(0xffca0500, 0x04), - DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +static struct resource cmt0_resources[] = { + DEFINE_RES_MEM(0xffca0000, 0x1004), + DEFINE_RES_IRQ(gic_spi(142)), }; #define r8a7790_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -290,6 +281,11 @@ static const struct resource cmt00_resources[] __initconst = { void __init r8a7790_add_dt_devices(void) { + r8a7790_register_cmt(0); +} + +void __init r8a7790_add_standard_devices(void) +{ r8a7790_register_scif(0); r8a7790_register_scif(1); r8a7790_register_scif(2); @@ -300,14 +296,15 @@ void __init r8a7790_add_dt_devices(void) r8a7790_register_scif(7); r8a7790_register_scif(8); r8a7790_register_scif(9); - r8a7790_register_cmt(00); -} - -void __init r8a7790_add_standard_devices(void) -{ r8a7790_add_dt_devices(); r8a7790_register_irqc(0); r8a7790_register_thermal(); + r8a7790_register_i2c(0); + r8a7790_register_i2c(1); + r8a7790_register_i2c(2); + r8a7790_register_i2c(3); + r8a7790_register_audio_dmac(0); + r8a7790_register_audio_dmac(1); } void __init r8a7790_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e43860..04a96ddb3224 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -128,20 +128,17 @@ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */ &scif##index##_platform_data, \ sizeof(scif##index##_platform_data)) -static const struct sh_timer_config cmt00_platform_data __initconst = { - .name = "CMT00", - .timer_bit = 0, - .clockevent_rating = 80, +static struct sh_timer_config cmt0_platform_data = { + .channels_mask = 0x60, }; -static const struct resource cmt00_resources[] __initconst = { - DEFINE_RES_MEM(0xffca0510, 0x0c), - DEFINE_RES_MEM(0xffca0500, 0x04), - DEFINE_RES_IRQ(gic_spi(142)), /* CMT0_0 */ +static struct resource cmt0_resources[] = { + DEFINE_RES_MEM(0xffca0000, 0x1004), + DEFINE_RES_IRQ(gic_spi(142)), }; #define r8a7791_register_cmt(idx) \ - platform_device_register_resndata(&platform_bus, "sh_cmt", \ + platform_device_register_resndata(&platform_bus, "sh-cmt-48-gen2", \ idx, cmt##idx##_resources, \ ARRAY_SIZE(cmt##idx##_resources), \ &cmt##idx##_platform_data, \ @@ -185,6 +182,11 @@ static const struct resource thermal_resources[] __initconst = { void __init r8a7791_add_dt_devices(void) { + r8a7791_register_cmt(0); +} + +void __init r8a7791_add_standard_devices(void) +{ r8a7791_register_scif(0); r8a7791_register_scif(1); r8a7791_register_scif(2); @@ -200,23 +202,11 @@ void __init r8a7791_add_dt_devices(void) r8a7791_register_scif(12); r8a7791_register_scif(13); r8a7791_register_scif(14); - r8a7791_register_cmt(00); -} - -void __init r8a7791_add_standard_devices(void) -{ r8a7791_add_dt_devices(); r8a7791_register_irqc(0); r8a7791_register_thermal(); } -void __init r8a7791_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char *r8a7791_boards_compat_dt[] __initdata = { "renesas,r8a7791", @@ -225,7 +215,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 10604480f325..542c5a47173f 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -30,12 +30,16 @@ u32 rcar_gen2_read_mode_pins(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); + static u32 mode; + static bool mode_valid; + + if (!mode_valid) { + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + mode_valid = true; + } return mode; } diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 27301278c208..2a8b9f2a2f54 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -119,28 +119,16 @@ SH7372_SCIF(PORT_SCIFB, 6, 0xe6c30000, evt2irq(0x0d60)); /* CMT */ static struct sh_timer_config cmt2_platform_data = { - .name = "CMT2", - .channel_offset = 0x40, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 125, + .channels_mask = 0x20, }; static struct resource cmt2_resources[] = { - [0] = { - .name = "CMT2", - .start = 0xe6130040, - .end = 0xe613004b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x0b80), /* CMT2 */ - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xe6130000, 0x50), + DEFINE_RES_IRQ(evt2irq(0x0b80)), }; static struct platform_device cmt2_device = { - .name = "sh_cmt", + .name = "sh-cmt-32-fast", .id = 2, .dev = { .platform_data = &cmt2_platform_data, @@ -150,64 +138,25 @@ static struct platform_device cmt2_device = { }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = { - .name = "TMU00", - .start = 0xfff60008, - .end = 0xfff60013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0xe80), /* TMU_TUNI0 */ - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff60000, 0x2c), + DEFINE_RES_IRQ(intcs_evt2irq(0xe80)), + DEFINE_RES_IRQ(intcs_evt2irq(0xea0)), + DEFINE_RES_IRQ(intcs_evt2irq(0xec0)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = { - .name = "TMU01", - .start = 0xfff60014, - .end = 0xfff6001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = intcs_evt2irq(0xea0), /* TMU_TUNI1 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; /* I2C */ @@ -952,8 +901,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif5_device, &scif6_device, &cmt2_device, - &tmu00_device, - &tmu01_device, + &tmu0_device, &ipmmu_device, }; @@ -1000,8 +948,7 @@ void __init sh7372_add_standard_devices(void) { "A4R", &veu2_device, }, { "A4R", &veu3_device, }, { "A4R", &jpu_device, }, - { "A4R", &tmu00_device, }, - { "A4R", &tmu01_device, }, + { "A4R", &tmu0_device, }, }; sh7372_init_pm_domains(); @@ -1037,11 +984,7 @@ void __init sh7372_add_early_devices_dt(void) { shmobile_setup_delay(800, 1, 3); /* Cortex-A8 @ 800MHz */ - early_platform_add_devices(sh7372_early_devices, - ARRAY_SIZE(sh7372_early_devices)); - - /* setup early console here as well */ - shmobile_setup_console(); + sh7372_add_early_devices(); } void __init sh7372_add_standard_devices_dt(void) diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index f74ab530c71d..ad00724a2269 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -104,86 +104,45 @@ SH73A0_SCIF(PORT_SCIFA, 6, 0xe6cc0000, gic_spi(156)); SH73A0_SCIF(PORT_SCIFA, 7, 0xe6cd0000, gic_spi(143)); SH73A0_SCIF(PORT_SCIFB, 8, 0xe6c30000, gic_spi(80)); -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 80, - .clocksource_rating = 125, +static struct sh_timer_config cmt1_platform_data = { + .channels_mask = 0x3f, }; -static struct resource cmt10_resources[] = { - [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = gic_spi(65), - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt1_resources[] = { + DEFINE_RES_MEM(0xe6138000, 0x200), + DEFINE_RES_IRQ(gic_spi(65)), }; -static struct platform_device cmt10_device = { - .name = "sh_cmt", - .id = 10, +static struct platform_device cmt1_device = { + .name = "sh-cmt-48", + .id = 1, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt1_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt1_resources, + .num_resources = ARRAY_SIZE(cmt1_resources), }; /* TMU */ -static struct sh_timer_config tmu00_platform_data = { - .name = "TMU00", - .channel_offset = 0x4, - .timer_bit = 0, - .clockevent_rating = 200, +static struct sh_timer_config tmu0_platform_data = { + .channels_mask = 7, }; -static struct resource tmu00_resources[] = { - [0] = DEFINE_RES_MEM(0xfff60008, 0xc), - [1] = { - .start = intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */ - .flags = IORESOURCE_IRQ, - }, +static struct resource tmu0_resources[] = { + DEFINE_RES_MEM(0xfff60000, 0x2c), + DEFINE_RES_IRQ(intcs_evt2irq(0xe80)), + DEFINE_RES_IRQ(intcs_evt2irq(0xea0)), + DEFINE_RES_IRQ(intcs_evt2irq(0xec0)), }; -static struct platform_device tmu00_device = { - .name = "sh_tmu", +static struct platform_device tmu0_device = { + .name = "sh-tmu", .id = 0, .dev = { - .platform_data = &tmu00_platform_data, - }, - .resource = tmu00_resources, - .num_resources = ARRAY_SIZE(tmu00_resources), -}; - -static struct sh_timer_config tmu01_platform_data = { - .name = "TMU01", - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu01_resources[] = { - [0] = DEFINE_RES_MEM(0xfff60014, 0xc), - [1] = { - .start = intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu01_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu01_platform_data, + .platform_data = &tmu0_platform_data, }, - .resource = tmu01_resources, - .num_resources = ARRAY_SIZE(tmu01_resources), + .resource = tmu0_resources, + .num_resources = ARRAY_SIZE(tmu0_resources), }; static struct resource i2c0_resources[] = { @@ -746,12 +705,11 @@ static struct platform_device *sh73a0_devices_dt[] __initdata = { &scif6_device, &scif7_device, &scif8_device, - &cmt10_device, + &cmt1_device, }; static struct platform_device *sh73a0_early_devices[] __initdata = { - &tmu00_device, - &tmu01_device, + &tmu0_device, &ipmmu_device, }; diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f2ca92308f75..2dfd748da7f3 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2df5bd190fe4..ec979529f30f 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -20,6 +20,7 @@ #include <asm/smp_plat.h> #include <mach/common.h> #include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> #define RST 0xe6160000 #define CA15BAR 0x0020 @@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) iounmap(p); } +static int r8a7791_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + /* Error out when hardware debug mode is enabled */ + if (rcar_gen2_read_mode_pins() & BIT(21)) { + pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); + return -ENOTSUPP; + } + + return shmobile_smp_apmu_boot_secondary(cpu, idle); +} + struct smp_operations r8a7791_smp_ops __initdata = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, + .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = shmobile_smp_cpu_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 62d7052d6f21..68bc0b82226d 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -21,6 +21,24 @@ #include <linux/platform_device.h> #include <linux/clocksource.h> #include <linux/delay.h> +#include <linux/of_address.h> + +void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, + unsigned int mult, unsigned int div) +{ + /* calculate a worst-case loops-per-jiffy value + * based on maximum cpu core hz setting and the + * __delay() implementation in arch/arm/lib/delay.S + * + * this will result in a longer delay than expected + * when the cpu core runs on lower frequencies. + */ + + unsigned int value = HZ * div / mult; + + if (!preset_lpj) + preset_lpj = max_cpu_core_hz / value; +} void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, preset_lpj = max_cpu_core_mhz * value; } +void __init shmobile_init_delay(void) +{ + struct device_node *np, *parent; + u32 max_freq, freq; + + max_freq = 0; + + parent = of_find_node_by_path("/cpus"); + if (parent) { + for_each_child_of_node(parent, np) { + if (!of_property_read_u32(np, "clock-frequency", &freq)) + max_freq = max(max_freq, freq); + } + of_node_put(parent); + } + + if (max_freq) { + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15")) + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 2, 4); + } +} + static void __init shmobile_late_time_init(void) { /* diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 910e978dfbc0..3cf6ef8d4317 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -17,6 +17,7 @@ static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", + "st,stih407", NULL }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b57d7d53b9d3..0fbd4f156bfa 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,14 +1,38 @@ -config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 - select ARCH_HAS_RESET_CONTROLLER +menuconfig ARCH_SUNXI + bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB - select ARM_GIC - select ARM_PSCI select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_ARM_ARCH_TIMER select PINCTRL select PINCTRL_SUNXI - select RESET_CONTROLLER select SUN4I_TIMER + +if ARCH_SUNXI + +config MACH_SUN4I + bool "Allwinner A10 (sun4i) SoCs support" + default ARCH_SUNXI + +config MACH_SUN5I + bool "Allwinner A10s / A13 (sun5i) SoCs support" + default ARCH_SUNXI + select SUN5I_HSTIMER + +config MACH_SUN6I + bool "Allwinner A31 (sun6i) SoCs support" + default ARCH_SUNXI + select ARCH_HAS_RESET_CONTROLLER + select ARM_GIC + select MFD_SUN6I_PRCM + select RESET_CONTROLLER + select SUN5I_HSTIMER + +config MACH_SUN7I + bool "Allwinner A20 (sun7i) SoCs support" + default ARCH_SUNXI + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER select SUN5I_HSTIMER + +endif diff --git a/arch/arm/mach-sunxi/common.h b/arch/arm/mach-sunxi/common.h deleted file mode 100644 index 9e5ac4756cbb..000000000000 --- a/arch/arm/mach-sunxi/common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Core functions for Allwinner SoCs - * - * Copyright (C) 2013 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_SUNXI_COMMON_H_ -#define __ARCH_SUNXI_COMMON_H_ - -void sun6i_secondary_startup(void); -extern struct smp_operations sun6i_smp_ops; - -#endif /* __ARCH_SUNXI_COMMON_H_ */ diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 0c7dbce033cc..c53077bb8c3f 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -21,8 +21,6 @@ #include <linux/of_address.h> #include <linux/smp.h> -#include "common.h" - #define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64) #define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40) #define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04) @@ -122,3 +120,4 @@ struct smp_operations sun6i_smp_ops __initdata = { .smp_prepare_cpus = sun6i_smp_prepare_cpus, .smp_boot_secondary = sun6i_smp_boot_secondary, }; +CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 460b5a4962ef..3f9587bb51f6 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,111 +12,8 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/reboot.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#include "common.h" - -#define SUN4I_WATCHDOG_CTRL_REG 0x00 -#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) -#define SUN4I_WATCHDOG_MODE_REG 0x04 -#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) -#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) - -#define SUN6I_WATCHDOG1_IRQ_REG 0x00 -#define SUN6I_WATCHDOG1_CTRL_REG 0x10 -#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 -#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) -#define SUN6I_WATCHDOG1_MODE_REG 0x18 -#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) - -static void __iomem *wdt_base; - -static void sun4i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Enable timer and set reset bit in the watchdog */ - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - - /* - * Restart the watchdog. The default (and lowest) interval - * value for the watchdog is 0.5s. - */ - writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - } -} - -static void sun6i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Disable interrupts */ - writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG); - - /* We want to disable the IRQ and just reset the whole system */ - writel(SUN6I_WATCHDOG1_CONFIG_RESTART, - wdt_base + SUN6I_WATCHDOG1_CONFIG_REG); - - /* Enable timer. The default and lowest interval value is 0.5s */ - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - - /* Restart the watchdog. */ - writel(SUN6I_WATCHDOG1_CTRL_RESTART, - wdt_base + SUN6I_WATCHDOG1_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - } -} - -static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-a10-wdt" }, - { .compatible = "allwinner,sun6i-a31-wdt" }, - { /*sentinel*/ } -}; - -static void sunxi_setup_restart(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, sunxi_restart_ids); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void __init sunxi_dt_init(void) -{ - sunxi_setup_restart(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -126,9 +23,7 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") - .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -140,16 +35,14 @@ extern void __init sun6i_reset_init(void); static void __init sun6i_timer_init(void) { of_clk_init(NULL); - sun6i_reset_init(); + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + sun6i_reset_init(); clocksource_of_init(); } DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") - .init_machine = sunxi_dt_init, .init_time = sun6i_timer_init, .dt_compat = sun6i_board_dt_compat, - .restart = sun6i_restart, - .smp = smp_ops(sun6i_smp_ops), MACHINE_END static const char * const sun7i_board_dt_compat[] = { @@ -158,7 +51,5 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") - .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, - .restart = sun4i_restart, MACHINE_END diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 55b305d51669..e16999e5b735 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -7,7 +7,6 @@ config ARCH_TEGRA select CLKSRC_MMIO select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select MIGHT_HAVE_PCI select PINCTRL select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index fb7920201ab4..7c7123e7557b 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -41,6 +41,14 @@ #define PMC_REMOVE_CLAMPING 0x34 #define PMC_PWRGATE_STATUS 0x38 +#define PMC_SCRATCH0 0x50 +#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) +#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) +#define PMC_SCRATCH0_MODE_RCM (1 << 1) +#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ + PMC_SCRATCH0_MODE_BOOTLOADER | \ + PMC_SCRATCH0_MODE_RCM) + #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc @@ -165,6 +173,22 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) { u32 val; + val = tegra_pmc_readl(PMC_SCRATCH0); + val &= ~PMC_SCRATCH0_MODE_MASK; + + if (cmd) { + if (strcmp(cmd, "recovery") == 0) + val |= PMC_SCRATCH0_MODE_RECOVERY; + + if (strcmp(cmd, "bootloader") == 0) + val |= PMC_SCRATCH0_MODE_BOOTLOADER; + + if (strcmp(cmd, "forced-recovery") == 0) + val |= PMC_SCRATCH0_MODE_RCM; + } + + tegra_pmc_writel(val, PMC_SCRATCH0); + val = tegra_pmc_readl(0); val |= 0x10; tegra_pmc_writel(val, 0); diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index de544aabf292..9741de956b3e 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,8 +5,7 @@ obj-y := cpu.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \ - board-mop500-regulators.o \ +obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c deleted file mode 100644 index fcbf3a13a539..000000000000 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/amba/bus.h> -#include <linux/amba/mmci.h> -#include <linux/mmc/host.h> -#include <linux/platform_device.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <asm/mach-types.h> - -#include "db8500-regs.h" -#include "board-mop500.h" -#include "ste-dma40-db8500.h" - -/* - * v2 has a new version of this block that need to be forced, the number found - * in hardware is incorrect - */ -#define U8500_SDI_V2_PERIPHID 0x10480180 - -/* - * SDI 0 (MicroSD slot) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; - -static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV29_SD_MM0, -}; -#endif - -struct mmci_platform_data mop500_sdi0_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_SD_HIGHSPEED | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_UHS_SDR12 | - MMC_CAP_UHS_SDR25, - .gpio_wp = -1, - .sigdir = MCI_ST_FBCLKEN | - MCI_ST_CMDDIREN | - MCI_ST_DATA0DIREN | - MCI_ST_DATA2DIREN, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi0_dma_cfg_rx, - .dma_tx_param = &mop500_sdi0_dma_cfg_tx, -#endif -}; - -/* - * SDI1 (SDIO WLAN) - */ -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg sdi1_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; - -static struct stedma40_chan_cfg sdi1_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV32_SD_MM1, -}; -#endif - -struct mmci_platform_data mop500_sdi1_data = { - .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_NONREMOVABLE, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &sdi1_dma_cfg_rx, - .dma_tx_param = &sdi1_dma_cfg_tx, -#endif -}; - -/* - * SDI 2 (POP eMMC, not on DB8500ed) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; - -static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV28_SD_MM2, -}; -#endif - -struct mmci_platform_data mop500_sdi2_data = { - .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi2_dma_cfg_rx, - .dma_tx_param = &mop500_sdi2_dma_cfg_tx, -#endif -}; - -/* - * SDI 4 (on-board eMMC) - */ - -#ifdef CONFIG_STE_DMA40 -struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; - -static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV42_SD_MM4, -}; -#endif - -struct mmci_platform_data mop500_sdi4_data = { - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA | - MMC_CAP_8_BIT_DATA | - MMC_CAP_NONREMOVABLE | - MMC_CAP_MMC_HIGHSPEED | - MMC_CAP_ERASE | - MMC_CAP_CMD23, - .gpio_cd = -1, - .gpio_wp = -1, -#ifdef CONFIG_STE_DMA40 - .dma_filter = stedma40_filter, - .dma_rx_param = &mop500_sdi4_dma_cfg_rx, - .dma_tx_param = &mop500_sdi4_dma_cfg_tx, -#endif -}; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 32cc0d8d8a0e..7c7b0adca582 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -8,12 +8,7 @@ #define __BOARD_MOP500_H #include <linux/platform_data/asoc-ux500-msp.h> -#include <linux/amba/mmci.h> -extern struct mmci_platform_data mop500_sdi0_data; -extern struct mmci_platform_data mop500_sdi1_data; -extern struct mmci_platform_data mop500_sdi2_data; -extern struct mmci_platform_data mop500_sdi4_data; extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 8820f602fcd2..fa308f07fae5 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -146,10 +146,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index f2c89fb8fca9..be83ba25f81b 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -310,6 +310,21 @@ static struct platform_device char_lcd_device = { .resource = char_lcd_resources, }; +static struct resource leds_resources[] = { + { + .start = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET, + .end = VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET + 4, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_device = { + .name = "versatile-leds", + .id = -1, + .num_resources = ARRAY_SIZE(leds_resources), + .resource = leds_resources, +}; + /* * Clock handling */ @@ -795,6 +810,7 @@ void __init versatile_init(void) platform_device_register(&versatile_i2c_device); platform_device_register(&smc91x_device); platform_device_register(&char_lcd_device); + platform_device_register(&leds_device); for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { struct amba_device *d = amba_devs[i]; diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 657d52d0391f..90249cfc37b3 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -4,6 +4,7 @@ config ARCH_VEXPRESS select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC + select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE select HAVE_ARM_SCU if SMP @@ -18,6 +19,8 @@ config ARCH_VEXPRESS select POWER_SUPPLY select REGULATOR_FIXED_VOLTAGE if REGULATOR select VEXPRESS_CONFIG + select VEXPRESS_SYSCFG + select MFD_VEXPRESS_SYSREG help This option enables support for systems using Cortex processor based ARM core and logic (FPGA) tiles on the Versatile Express motherboard, diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index bde4374ab6d5..152fad91b3ae 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -4,10 +4,9 @@ /* Tile's peripherals static mappings should start here */ #define V2T_PERIPH 0xf8200000 -void vexpress_dt_smp_map_io(void); - bool vexpress_smp_init_ops(void); extern struct smp_operations vexpress_smp_ops; +extern struct smp_operations vexpress_smp_dt_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 204038ef3795..86150d7a2e7d 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -146,6 +146,10 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; +static struct clk_lookup osc1_lookup = { + .dev_id = "ct:clcd", +}; + static struct platform_device osc1_device = { .name = "vexpress-osc", .id = 1, @@ -153,6 +157,7 @@ static struct platform_device osc1_device = { .resource = (struct resource []) { VEXPRESS_RES_FUNC(0xf, 1), }, + .dev.platform_data = &osc1_lookup, }; static void __init ct_ca9x4_init(void) @@ -163,10 +168,7 @@ static void __init ct_ca9x4_init(void) amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource); platform_device_register(&pmu_device); - platform_device_register(&osc1_device); - - WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev), - NULL, "ct:clcd")); + vexpress_syscfg_device_register(&osc1_device); } #ifdef CONFIG_SMP diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index 993c9ae5dc5e..a1f3804fd5a5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,8 +12,7 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> -#include <linux/of.h> -#include <linux/of_fdt.h> +#include <linux/of_address.h> #include <linux/vexpress.h> #include <asm/mcpm.h> @@ -26,154 +25,13 @@ #include "core.h" -#if defined(CONFIG_OF) - -static enum { - GENERIC_SCU, - CORTEX_A9_SCU, -} vexpress_dt_scu __initdata = GENERIC_SCU; - -static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = { - .virtual = V2T_PERIPH, - /* .pfn set in vexpress_dt_init_cortex_a9_scu() */ - .length = SZ_128, - .type = MT_DEVICE, -}; - -static void *vexpress_dt_cortex_a9_scu_base __initdata; - -const static char *vexpress_dt_cortex_a9_match[] __initconst = { - "arm,cortex-a5-scu", - "arm,cortex-a9-scu", - NULL -}; - -static int __init vexpress_dt_find_scu(unsigned long node, - const char *uname, int depth, void *data) -{ - if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) { - phys_addr_t phys_addr; - __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL); - - if (WARN_ON(!reg)) - return -EINVAL; - - phys_addr = be32_to_cpup(reg); - vexpress_dt_scu = CORTEX_A9_SCU; - - vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr); - iotable_init(&vexpress_dt_cortex_a9_scu_map, 1); - vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256); - if (WARN_ON(!vexpress_dt_cortex_a9_scu_base)) - return -EFAULT; - } - - return 0; -} - -void __init vexpress_dt_smp_map_io(void) -{ - if (initial_boot_params) - WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL)); -} - -static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname, - int depth, void *data) -{ - static int prev_depth = -1; - static int nr_cpus = -1; - - if (prev_depth > depth && nr_cpus > 0) - return nr_cpus; - - if (nr_cpus < 0 && strcmp(uname, "cpus") == 0) - nr_cpus = 0; - - if (nr_cpus >= 0) { - const char *device_type = of_get_flat_dt_prop(node, - "device_type", NULL); - - if (device_type && strcmp(device_type, "cpu") == 0) - nr_cpus++; - } - - prev_depth = depth; - - return 0; -} - -static void __init vexpress_dt_smp_init_cpus(void) -{ - int ncores = 0, i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL); - break; - case CORTEX_A9_SCU: - ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } - - if (ncores < 2) - return; - - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; - } - - for (i = 0; i < ncores; ++i) - set_cpu_possible(i, true); -} - -static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - int i; - - switch (vexpress_dt_scu) { - case GENERIC_SCU: - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - break; - case CORTEX_A9_SCU: - scu_enable(vexpress_dt_cortex_a9_scu_base); - break; - default: - WARN_ON(1); - break; - } -} - -#else - -static void __init vexpress_dt_smp_init_cpus(void) -{ - WARN_ON(1); -} - -void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus) -{ - WARN_ON(1); -} - -#endif - /* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ static void __init vexpress_smp_init_cpus(void) { - if (ct_desc) - ct_desc->init_cpu_map(); - else - vexpress_dt_smp_init_cpus(); - + ct_desc->init_cpu_map(); } static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) @@ -182,10 +40,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus) * Initialise the present map, which describes the set of CPUs * actually populated at the present time. */ - if (ct_desc) - ct_desc->smp_enable(max_cpus); - else - vexpress_dt_smp_prepare_cpus(max_cpus); + ct_desc->smp_enable(max_cpus); /* * Write the address of secondary startup into the @@ -223,3 +78,39 @@ bool __init vexpress_smp_init_ops(void) #endif return false; } + +#if defined(CONFIG_OF) + +static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = { + { .compatible = "arm,cortex-a5-scu", }, + { .compatible = "arm,cortex-a9-scu", }, + {} +}; + +static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *scu = of_find_matching_node(NULL, + vexpress_smp_dt_scu_match); + + if (scu) + scu_enable(of_iomap(scu, 0)); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + vexpress_flags_set(virt_to_phys(versatile_secondary_startup)); +} + +struct smp_operations __initdata vexpress_smp_dt_ops = { + .smp_prepare_cpus = vexpress_smp_dt_prepare_cpus, + .smp_secondary_init = versatile_secondary_init, + .smp_boot_secondary = versatile_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = vexpress_cpu_die, +#endif +}; + +#endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index b2fea70d412d..6ff681a24ba7 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = { static struct mmci_platform_data v2m_mmci_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_wp = VEXPRESS_GPIO_MMC_WPROT, - .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN, + .status = vexpress_get_mci_cardin, + .gpio_cd = -1, + .gpio_wp = -1, }; static struct resource v2m_sysreg_resources[] = { @@ -340,11 +341,6 @@ static void __init v2m_init(void) regulator_register_fixed(0, v2m_eth_supplies, ARRAY_SIZE(v2m_eth_supplies)); - platform_device_register(&v2m_muxfpga_device); - platform_device_register(&v2m_shutdown_device); - platform_device_register(&v2m_reboot_device); - platform_device_register(&v2m_dvimode_device); - platform_device_register(&v2m_sysreg_device); platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); @@ -356,6 +352,11 @@ static void __init v2m_init(void) for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++) amba_device_register(v2m_amba_devs[i], &iomem_resource); + vexpress_syscfg_device_register(&v2m_muxfpga_device); + vexpress_syscfg_device_register(&v2m_shutdown_device); + vexpress_syscfg_device_register(&v2m_reboot_device); + vexpress_syscfg_device_register(&v2m_dvimode_device); + ct_desc->init_tile(); } @@ -369,70 +370,9 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, MACHINE_END -static struct map_desc v2m_rs1_io_desc __initdata = { - .virtual = V2M_PERIPH, - .pfn = __phys_to_pfn(0x1c000000), - .length = SZ_2M, - .type = MT_DEVICE, -}; - -static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname, - int depth, void *data) -{ - const char **map = data; - - if (strcmp(uname, "motherboard") != 0) - return 0; - - *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL); - - return 1; -} - -void __init v2m_dt_map_io(void) -{ - const char *map = NULL; - - of_scan_flat_dt(v2m_dt_scan_memory_map, &map); - - if (map && strcmp(map, "rs1") == 0) - iotable_init(&v2m_rs1_io_desc, 1); - else - iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc)); - -#if defined(CONFIG_SMP) - vexpress_dt_smp_map_io(); -#endif -} - -void __init v2m_dt_init_early(void) -{ - u32 dt_hbi; - - vexpress_sysreg_of_early_init(); - - /* Confirm board type against DT property, if available */ - if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) { - u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER); - - if (WARN_ON(dt_hbi != hbi)) - pr_warning("vexpress: DT HBI (%x) is not matching " - "hardware (%x)!\n", dt_hbi, hbi); - } - - versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000); -} - -static const struct of_device_id v2m_dt_bus_match[] __initconst = { - { .compatible = "simple-bus", }, - { .compatible = "arm,amba-bus", }, - { .compatible = "arm,vexpress,config-bus", }, - {} -}; - static void __init v2m_dt_init(void) { - of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const v2m_dt_match[] __initconst = { @@ -444,9 +384,7 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, .l2c_aux_val = 0x00400000, .l2c_aux_mask = 0xfe0fffff, - .smp = smp_ops(vexpress_smp_ops), + .smp = smp_ops(vexpress_smp_dt_ops), .smp_init = smp_init_ops(vexpress_smp_init_ops), - .map_io = v2m_dt_map_io, - .init_early = v2m_dt_init_early, .init_machine = v2m_dt_init, MACHINE_END diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 58c2b844e0a3..573e0db1d0f0 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,14 +1,16 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARM_AMBA - select ARM_GIC select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP + select ARCH_SUPPORTS_BIG_ENDIAN + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER if !CPU_FREQ + select CADENCE_TTC_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select CADENCE_TTC_TIMER - select ARM_GLOBAL_TIMER if !CPU_FREQ select MFD_SYSCON + select SOC_BUS help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index d1e992e6403e..31a6fa40ba37 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -29,6 +29,8 @@ #include <linux/memblock.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,10 +39,15 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/smp_scu.h> +#include <asm/system_info.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" +#define ZYNQ_DEVCFG_MCTRL 0x80 +#define ZYNQ_DEVCFG_PS_VERSION_SHIFT 28 +#define ZYNQ_DEVCFG_PS_VERSION_MASK 0xF + void __iomem *zynq_scu_base; /** @@ -60,14 +67,76 @@ static struct platform_device zynq_cpuidle_device = { }; /** + * zynq_get_revision - Get Zynq silicon revision + * + * Return: Silicon version or -1 otherwise + */ +static int __init zynq_get_revision(void) +{ + struct device_node *np; + void __iomem *zynq_devcfg_base; + u32 revision; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0"); + if (!np) { + pr_err("%s: no devcfg node found\n", __func__); + return -1; + } + + zynq_devcfg_base = of_iomap(np, 0); + if (!zynq_devcfg_base) { + pr_err("%s: Unable to map I/O memory\n", __func__); + return -1; + } + + revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL); + revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT; + revision &= ZYNQ_DEVCFG_PS_VERSION_MASK; + + iounmap(zynq_devcfg_base); + + return revision; +} + +/** * zynq_init_machine - System specific initialization, intended to be * called from board specific initialization. */ static void __init zynq_init_machine(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + system_rev = zynq_get_revision(); + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", + zynq_slcr_get_device_id()); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + +out: + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); platform_device_register(&zynq_cpuidle_device); platform_device_register_full(&devinfo); diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index b097844d3175..f652f0a884a6 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void); extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); +extern u32 zynq_slcr_get_device_id(void); #ifdef CONFIG_SMP extern void secondary_startup(void); diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index 57a32869f0aa..dd8c071941e7 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -8,9 +8,12 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> ENTRY(zynq_secondary_trampoline) - ldr r0, [pc] +ARM_BE8(setend be) @ ensure we are in BE8 mode + ldr r0, zynq_secondary_trampoline_jump +ARM_BE8(rev r0, r0) bx r0 .globl zynq_secondary_trampoline_jump zynq_secondary_trampoline_jump: diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index a37d49a6e657..c43a2d16e223 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -26,10 +26,13 @@ #define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ +#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 #define SLCR_A9_CPU_RST 0x1 +#define SLCR_PSS_IDCODE_DEVICE_SHIFT 12 +#define SLCR_PSS_IDCODE_DEVICE_MASK 0x1F static void __iomem *zynq_slcr_base; static struct regmap *zynq_slcr_regmap; @@ -83,6 +86,22 @@ static inline int zynq_slcr_unlock(void) } /** + * zynq_slcr_get_device_id - Read device code id + * + * Return: Device code id + */ +u32 zynq_slcr_get_device_id(void) +{ + u32 val; + + zynq_slcr_read(&val, SLCR_PSS_IDCODE); + val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT; + val &= SLCR_PSS_IDCODE_DEVICE_MASK; + + return val; +} + +/** * zynq_slcr_system_reset - Reset the entire system. */ void zynq_slcr_system_reset(void) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 85a109bf2e2e..4c88935654ca 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -390,7 +390,7 @@ static int __init atomic_pool_init(void) if (!pages) goto no_pages; - if (IS_ENABLED(CONFIG_DMA_CMA)) + if (dev_get_cma_area(NULL)) ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page, atomic_pool_init); else @@ -701,7 +701,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, addr = __alloc_simple_buffer(dev, size, gfp, &page); else if (!(gfp & __GFP_WAIT)) addr = __alloc_from_pool(size, &page); - else if (!IS_ENABLED(CONFIG_DMA_CMA)) + else if (!dev_get_cma_area(dev)) addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller); else addr = __alloc_from_contiguous(dev, size, prot, &page, caller); @@ -790,7 +790,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, __dma_free_buffer(page, size); } else if (__free_from_pool(cpu_addr, size)) { return; - } else if (!IS_ENABLED(CONFIG_DMA_CMA)) { + } else if (!dev_get_cma_area(dev)) { __dma_free_remap(cpu_addr, size); __dma_free_buffer(page, size); } else { @@ -1075,6 +1075,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, unsigned int order = get_order(size); unsigned int align = 0; unsigned int count, start; + size_t mapping_size = mapping->bits << PAGE_SHIFT; unsigned long flags; dma_addr_t iova; int i; @@ -1120,7 +1121,7 @@ static inline dma_addr_t __alloc_iova(struct dma_iommu_mapping *mapping, } spin_unlock_irqrestore(&mapping->lock, flags); - iova = mapping->base + (mapping->size * i); + iova = mapping->base + (mapping_size * i); iova += start << PAGE_SHIFT; return iova; @@ -1130,6 +1131,7 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, dma_addr_t addr, size_t size) { unsigned int start, count; + size_t mapping_size = mapping->bits << PAGE_SHIFT; unsigned long flags; dma_addr_t bitmap_base; u32 bitmap_index; @@ -1137,14 +1139,14 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, if (!size) return; - bitmap_index = (u32) (addr - mapping->base) / (u32) mapping->size; + bitmap_index = (u32) (addr - mapping->base) / (u32) mapping_size; BUG_ON(addr < mapping->base || bitmap_index > mapping->extensions); - bitmap_base = mapping->base + mapping->size * bitmap_index; + bitmap_base = mapping->base + mapping_size * bitmap_index; start = (addr - bitmap_base) >> PAGE_SHIFT; - if (addr + size > bitmap_base + mapping->size) { + if (addr + size > bitmap_base + mapping_size) { /* * The address range to be freed reaches into the iova * range of the next bitmap. This should not happen as @@ -1965,7 +1967,6 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size) mapping->extensions = extensions; mapping->base = base; mapping->bits = BITS_PER_BYTE * bitmap_size; - mapping->size = mapping->bits << PAGE_SHIFT; spin_lock_init(&mapping->lock); diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index 54ee6163c181..66781bf34077 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -56,8 +56,3 @@ int pmd_huge(pmd_t pmd) { return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); } - -int pmd_huge_support(void) -{ - return 1; -} diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 5958ac05181e..659c75d808dc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -311,7 +311,6 @@ void __init arm_memblock_init(const struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); - arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 384a776d8eb2..61b4d705c267 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -40,7 +40,7 @@ static void __iomem *sync32k_cnt_reg; static u64 notrace omap_32k_read_sched_clock(void) { - return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; } /** @@ -64,7 +64,7 @@ static void omap_read_persistent_clock(struct timespec *ts) spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; - cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; nsecs = clocksource_cyc2ns(cycles - last_cycles, persistent_mult, persistent_shift); @@ -95,7 +95,7 @@ int __init omap_init_clocksource_32k(void __iomem *vbase) * The 'SCHEME' bits(30-31) of the revision register is used * to identify the version. */ - if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) & + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & OMAP2_32KSYNCNT_REV_SCHEME) sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; else diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c index aa7ebc6bcd65..48b69de89a5d 100644 --- a/arch/arm/plat-omap/debug-leds.c +++ b/arch/arm/plat-omap/debug-leds.c @@ -85,12 +85,12 @@ static void dbg_led_set(struct led_classdev *cdev, struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); if (b != LED_OFF) reg |= led->mask; else reg &= ~led->mask; - __raw_writew(reg, &fpga->leds); + writew_relaxed(reg, &fpga->leds); } static enum led_brightness dbg_led_get(struct led_classdev *cdev) @@ -98,7 +98,7 @@ static enum led_brightness dbg_led_get(struct led_classdev *cdev) struct dbg_led *led = container_of(cdev, struct dbg_led, cdev); u16 reg; - reg = __raw_readw(&fpga->leds); + reg = readw_relaxed(&fpga->leds); return (reg & led->mask) ? LED_FULL : LED_OFF; } @@ -112,7 +112,7 @@ static int fpga_probe(struct platform_device *pdev) return -ENODEV; fpga = ioremap(iomem->start, resource_size(iomem)); - __raw_writew(0xff, &fpga->leds); + writew_relaxed(0xff, &fpga->leds); for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) { struct dbg_led *led; @@ -138,15 +138,15 @@ static int fpga_probe(struct platform_device *pdev) static int fpga_suspend_noirq(struct device *dev) { - fpga_led_state = __raw_readw(&fpga->leds); - __raw_writew(0xff, &fpga->leds); + fpga_led_state = readw_relaxed(&fpga->leds); + writew_relaxed(0xff, &fpga->leds); return 0; } static int fpga_resume_noirq(struct device *dev) { - __raw_writew(~fpga_led_state, &fpga->leds); + writew_relaxed(~fpga_led_state, &fpga->leds); return 0; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 5f5b975887fc..b5608b1f9fbd 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -70,6 +70,7 @@ static u32 errata; static struct omap_dma_global_context_registers { u32 dma_irqenable_l0; + u32 dma_irqenable_l1; u32 dma_ocp_sysconfig; u32 dma_gcr; } omap_dma_global_context; @@ -1973,10 +1974,17 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ +/* + * Note that we are currently using only IRQENABLE_L0 and L1. + * As the DSP may be using IRQENABLE_L2 and L3, let's not + * touch those for now. + */ void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = p->dma_read(IRQENABLE_L0, 0); + omap_dma_global_context.dma_irqenable_l1 = + p->dma_read(IRQENABLE_L1, 0); omap_dma_global_context.dma_ocp_sysconfig = p->dma_read(OCP_SYSCONFIG, 0); omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0); @@ -1991,6 +1999,8 @@ void omap_dma_global_context_restore(void) OCP_SYSCONFIG, 0); p->dma_write(omap_dma_global_context.dma_irqenable_l0, IRQENABLE_L0, 0); + p->dma_write(omap_dma_global_context.dma_irqenable_l1, + IRQENABLE_L1, 0); if (IS_DMA_ERRATA(DMA_ROMCODE_BUG)) p->dma_write(0x3 , IRQSTATUS_L0, 0); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 869254cebf84..db10169a08de 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -103,7 +103,7 @@ static void omap_timer_restore_context(struct omap_dm_timer *timer) timer->context.tmar); omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, timer->context.tsicr); - __raw_writel(timer->context.tier, timer->irq_ena); + writel_relaxed(timer->context.tier, timer->irq_ena); omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, timer->context.tclr); } @@ -699,9 +699,9 @@ int omap_dm_timer_set_int_disable(struct omap_dm_timer *timer, u32 mask) omap_dm_timer_enable(timer); if (timer->revision == 1) - l = __raw_readl(timer->irq_ena) & ~mask; + l = readl_relaxed(timer->irq_ena) & ~mask; - __raw_writel(l, timer->irq_dis); + writel_relaxed(l, timer->irq_dis); l = omap_dm_timer_read_reg(timer, OMAP_TIMER_WAKEUP_EN_REG) & ~mask; omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, l); @@ -722,7 +722,7 @@ unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer) return 0; } - l = __raw_readl(timer->irq_stat); + l = readl_relaxed(timer->irq_stat); return l; } diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index 2861b155485a..dd79f3005cdf 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -280,20 +280,20 @@ static inline u32 __omap_dm_timer_read(struct omap_dm_timer *timer, u32 reg, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - return __raw_readl(timer->func_base + (reg & 0xff)); + return readl_relaxed(timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_write(struct omap_dm_timer *timer, u32 reg, u32 val, int posted) { if (posted) - while (__raw_readl(timer->pend) & (reg >> WPSHIFT)) + while (readl_relaxed(timer->pend) & (reg >> WPSHIFT)) cpu_relax(); - __raw_writel(val, timer->func_base + (reg & 0xff)); + writel_relaxed(val, timer->func_base + (reg & 0xff)); } static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) @@ -301,7 +301,7 @@ static inline void __omap_dm_timer_init_regs(struct omap_dm_timer *timer) u32 tidr; /* Assume v1 ip if bits [31:16] are zero */ - tidr = __raw_readl(timer->io_base); + tidr = readl_relaxed(timer->io_base); if (!(tidr >> 16)) { timer->revision = 1; timer->irq_stat = timer->io_base + OMAP_TIMER_V1_STAT_OFFSET; @@ -385,7 +385,7 @@ static inline void __omap_dm_timer_stop(struct omap_dm_timer *timer, } /* Ack possibly pending interrupt */ - __raw_writel(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); + writel_relaxed(OMAP_TIMER_INT_OVERFLOW, timer->irq_stat); } static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, @@ -399,7 +399,7 @@ static inline void __omap_dm_timer_load_start(struct omap_dm_timer *timer, static inline void __omap_dm_timer_int_enable(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_ena); + writel_relaxed(value, timer->irq_ena); __omap_dm_timer_write(timer, OMAP_TIMER_WAKEUP_EN_REG, value, 0); } @@ -412,7 +412,7 @@ __omap_dm_timer_read_counter(struct omap_dm_timer *timer, int posted) static inline void __omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - __raw_writel(value, timer->irq_stat); + writel_relaxed(value, timer->irq_stat); } #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 6816192a7561..b61a3bcc2fa8 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np, orion_gpio_chip_count++; } - -#ifdef CONFIG_OF -static void __init orion_gpio_of_init_one(struct device_node *np, - int irq_gpio_base) -{ - int ngpio, gpio_base, mask_offset; - void __iomem *base; - int ret, i; - int irqs[4]; - int secondary_irq_base; - - ret = of_property_read_u32(np, "ngpio", &ngpio); - if (ret) - goto out; - ret = of_property_read_u32(np, "mask-offset", &mask_offset); - if (ret == -EINVAL) - mask_offset = 0; - else - goto out; - base = of_iomap(np, 0); - if (!base) - goto out; - - secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); - gpio_base = 32 * orion_gpio_chip_count; - - /* Get the interrupt numbers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - - for (i = 0; i < 4; i++) - irqs[i] = irq_of_parse_and_map(np, i); - - orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, - secondary_irq_base, irqs); - return; -out: - pr_err("%s: %s: missing mandatory property\n", __func__, np->name); -} - -void __init orion_gpio_of_init(int irq_gpio_base) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "marvell,orion-gpio") - orion_gpio_of_init_one(np, irq_gpio_base); -} -#endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index 50547e417936..96be19e9bd93 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,5 +12,4 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); -void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h index 614dcac9dc52..e763988b04b9 100644 --- a/arch/arm/plat-orion/include/plat/orion-gpio.h +++ b/arch/arm/plat-orion/include/plat/orion-gpio.h @@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np, int secondary_irq_base, int irq[4]); -void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 807df142444b..8c1fc06007c0 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -20,47 +20,6 @@ #include <plat/orion-gpio.h> #include <mach/bridge-regs.h> -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - * - * Notes: - * - this is prepared for Kirkwood and Dove only, update - * accordingly if you add Orion5x or MV78x00. - * - Orion5x uses different macro names and has only one - * set of CAUSE/MASK registers. - * - MV78x00 uses the same macro names but has a third - * set of CAUSE/MASK registers. - * - */ - -static void __iomem *orion_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { struct irq_chip_generic *gc; @@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ct->chip.irq_unmask = irq_gc_mask_set_bit; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(orion_legacy_handle_irq); -#endif -} - -#ifdef CONFIG_OF -static int __init orion_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - int i = 0; - void __iomem *base; - - do { - base = of_iomap(np, i); - if (base) { - orion_irq_init(i * 32, base + 0x04); - i++; - } - } while (base); - - irq_domain_add_legacy(np, i * 32, 0, 0, - &irq_domain_simple_ops, NULL); - return 0; -} - -static const struct of_device_id orion_irq_match[] = { - { .compatible = "marvell,orion-intc", - .data = orion_add_irq_domain, }, - {}, -}; - -void __init orion_dt_init_irq(void) -{ - of_irq_init(orion_irq_match); } -#endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 25c826ed3b65..5e5beaa9ae15 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 7231c8e4975e..72d4178ad23b 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -119,6 +119,7 @@ struct s3c_plltab { struct s3c_cpufreq_config { struct s3c_freq freq; struct s3c_freq max; + struct clk *mpll; struct cpufreq_frequency_table pll; struct s3c_clkdivs divs; struct s3c_cpufreq_info *info; /* for core, not drivers */ diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 5992b8dd9b89..5a237db9f9eb 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -43,16 +43,6 @@ extern unsigned long samsung_cpu_id; #define S5PV210_CPU_ID 0x43110000 #define S5PV210_CPU_MASK 0xFFFFF000 -#define EXYNOS4210_CPU_ID 0x43210000 -#define EXYNOS4212_CPU_ID 0x43220000 -#define EXYNOS4412_CPU_ID 0xE4412200 -#define EXYNOS4_CPU_MASK 0xFFFE0000 - -#define EXYNOS5250_SOC_ID 0x43520000 -#define EXYNOS5420_SOC_ID 0xE5420000 -#define EXYNOS5440_SOC_ID 0xE5440000 -#define EXYNOS5_SOC_MASK 0xFFFFF000 - #define IS_SAMSUNG_CPU(name, id, mask) \ static inline int is_samsung_##name(void) \ { \ @@ -68,12 +58,6 @@ IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK) IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK) IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK) -IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) -IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) -IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \ @@ -126,50 +110,6 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_s5pv210() 0 #endif -#if defined(CONFIG_CPU_EXYNOS4210) -# define soc_is_exynos4210() is_samsung_exynos4210() -#else -# define soc_is_exynos4210() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4212) -# define soc_is_exynos4212() is_samsung_exynos4212() -#else -# define soc_is_exynos4212() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS4412) -# define soc_is_exynos4412() is_samsung_exynos4412() -#else -# define soc_is_exynos4412() 0 -#endif - -#define EXYNOS4210_REV_0 (0x0) -#define EXYNOS4210_REV_1_0 (0x10) -#define EXYNOS4210_REV_1_1 (0x11) - -#if defined(CONFIG_SOC_EXYNOS5250) -# define soc_is_exynos5250() is_samsung_exynos5250() -#else -# define soc_is_exynos5250() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5420) -# define soc_is_exynos5420() is_samsung_exynos5420() -#else -# define soc_is_exynos5420() 0 -#endif - -#if defined(CONFIG_SOC_EXYNOS5440) -# define soc_is_exynos5440() is_samsung_exynos5440() -#else -# define soc_is_exynos5440() 0 -#endif - -#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ - soc_is_exynos4412()) -#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420()) - #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE } #ifndef KHZ @@ -239,7 +179,6 @@ extern struct bus_type s3c2443_subsys; extern struct bus_type s3c6410_subsys; extern struct bus_type s5p64x0_subsys; extern struct bus_type s5pv210_subsys; -extern struct bus_type exynos_subsys; extern void (*s5pc1xx_idle)(void); diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index 98087b655df0..469b86260fe3 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -125,8 +125,8 @@ device_initcall(s5p_mfc_memory_init); int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname, int depth, void *data) { - __be32 *prop; - unsigned long len; + const __be32 *prop; + int len; struct s5p_mfc_dt_meminfo mfc_mem; if (!data) diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 2c4332b9f948..fce41e93b6a4 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -6,12 +6,6 @@ config PLAT_VERSATILE_CLOCK config PLAT_VERSATILE_CLCD bool -config PLAT_VERSATILE_LEDS - def_bool y if NEW_LEDS - depends on ARCH_REALVIEW || ARCH_VERSATILE - select LEDS_CLASS - select LEDS_TRIGGERS - config PLAT_VERSATILE_SCHED_CLOCK def_bool y diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index f88d448b629c..2e0c472958ae 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -2,6 +2,5 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_CLCD) += clcd.o -obj-$(CONFIG_PLAT_VERSATILE_LEDS) += leds.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/leds.c b/arch/arm/plat-versatile/leds.c deleted file mode 100644 index d2490d00b46c..000000000000 --- a/arch/arm/plat-versatile/leds.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Driver for the 8 user LEDs found on the RealViews and Versatiles - * Based on DaVinci's DM365 board code - * - * License terms: GNU General Public License (GPL) version 2 - * Author: Linus Walleij <triad@df.lth.se> - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/leds.h> - -#include <mach/hardware.h> -#include <mach/platform.h> - -#ifdef VERSATILE_SYS_BASE -#define LEDREG (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) -#endif - -#ifdef REALVIEW_SYS_BASE -#define LEDREG (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) -#endif - -struct versatile_led { - struct led_classdev cdev; - u8 mask; -}; - -/* - * The triggers lines up below will only be used if the - * LED triggers are compiled in. - */ -static const struct { - const char *name; - const char *trigger; -} versatile_leds[] = { - { "versatile:0", "heartbeat", }, - { "versatile:1", "mmc0", }, - { "versatile:2", "cpu0" }, - { "versatile:3", "cpu1" }, - { "versatile:4", "cpu2" }, - { "versatile:5", "cpu3" }, - { "versatile:6", }, - { "versatile:7", }, -}; - -static void versatile_led_set(struct led_classdev *cdev, - enum led_brightness b) -{ - struct versatile_led *led = container_of(cdev, - struct versatile_led, cdev); - u32 reg = readl(LEDREG); - - if (b != LED_OFF) - reg |= led->mask; - else - reg &= ~led->mask; - writel(reg, LEDREG); -} - -static enum led_brightness versatile_led_get(struct led_classdev *cdev) -{ - struct versatile_led *led = container_of(cdev, - struct versatile_led, cdev); - u32 reg = readl(LEDREG); - - return (reg & led->mask) ? LED_FULL : LED_OFF; -} - -static int __init versatile_leds_init(void) -{ - int i; - - /* All ON */ - writel(0xff, LEDREG); - for (i = 0; i < ARRAY_SIZE(versatile_leds); i++) { - struct versatile_led *led; - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (!led) - break; - - led->cdev.name = versatile_leds[i].name; - led->cdev.brightness_set = versatile_led_set; - led->cdev.brightness_get = versatile_led_get; - led->cdev.default_trigger = versatile_leds[i].trigger; - led->mask = BIT(i); - - if (led_classdev_register(NULL, &led->cdev) < 0) { - kfree(led); - break; - } - } - - return 0; -} - -/* - * Since we may have triggers on any subsystem, defer registration - * until after subsystem_init. - */ -fs_initcall(versatile_leds_init); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index b96723e258a0..1e632430570b 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -339,6 +339,14 @@ static int __init xen_pm_init(void) } late_initcall(xen_pm_init); + +/* empty stubs */ +void xen_arch_pre_suspend(void) { } +void xen_arch_post_suspend(int suspend_cancelled) { } +void xen_timer_resume(void) { } +void xen_arch_resume(void) { } + + /* In the hypervisor.S file. */ EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op); EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op); @@ -350,4 +358,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op); EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op); EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); +EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index d1cf7b7c2200..44e3a5f10c4c 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -89,6 +89,7 @@ HYPERCALL2(memory_op); HYPERCALL2(physdev_op); HYPERCALL3(vcpu_op); HYPERCALL1(tmem_op); +HYPERCALL2(multicall); ENTRY(privcmd_call) stmdb sp!, {r4} diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e759af5d7098..e384ab9b3862 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -112,6 +112,9 @@ config IOMMU_HELPER config KERNEL_MODE_NEON def_bool y +config FIX_EARLYCON_MEM + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -280,6 +283,20 @@ config CMDLINE_FORCE This is useful if you cannot or don't want to change the command-line options your boot loader passes to the kernel. +config EFI + bool "UEFI runtime support" + depends on OF && !CPU_BIG_ENDIAN + select LIBFDT + select UCS2_STRING + select EFI_PARAMS_FROM_FDT + default y + help + This option provides support for runtime services provided + by UEFI firmware (such as non-volatile variables, realtime + clock, and platform reset). A UEFI stub is also provided to + allow the kernel to be booted as an EFI application. This + is only useful on systems that have UEFI firmware. + endmenu menu "Userspace binary formats" @@ -331,6 +348,8 @@ source "net/Kconfig" source "drivers/Kconfig" +source "drivers/firmware/Kconfig" + source "fs/Kconfig" source "arch/arm64/kvm/Kconfig" diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug index d10ec334c93b..1c1b75629842 100644 --- a/arch/arm64/Kconfig.debug +++ b/arch/arm64/Kconfig.debug @@ -20,15 +20,6 @@ config STRICT_DEVMEM If in doubt, say Y. -config EARLY_PRINTK - bool "Early printk support" - default y - help - Say Y here if you want to have an early console using the - earlyprintk=<name>[,<addr>][,<options>] kernel parameter. It - is assumed that the early console device has been initialised - by the boot loader prior to starting the Linux kernel. - config PID_IN_CONTEXTIDR bool "Write the current PID to the CONTEXTIDR register" help diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi index 2f2ecd217363..ac2cb2418025 100644 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi @@ -200,7 +200,7 @@ }; mcc { - compatible = "arm,vexpress,config-bus", "simple-bus"; + compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; v2m_oscclk1: osc@1 { diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h index 0237f0867e37..57e8cb49824c 100644 --- a/arch/arm64/include/asm/atomic.h +++ b/arch/arm64/include/asm/atomic.h @@ -152,11 +152,6 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - /* * 64-bit atomic operations. */ diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h index 66eb7648043b..48b9e704af7c 100644 --- a/arch/arm64/include/asm/barrier.h +++ b/arch/arm64/include/asm/barrier.h @@ -98,6 +98,9 @@ do { \ #define set_mb(var, value) do { var = value; smp_mb(); } while (0) #define nop() asm volatile("nop"); +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() smp_mb() + #endif /* __ASSEMBLY__ */ #endif /* __ASM_BARRIER_H */ diff --git a/arch/arm64/include/asm/bitops.h b/arch/arm64/include/asm/bitops.h index aa5b59d6ba43..9c19594ce7cb 100644 --- a/arch/arm64/include/asm/bitops.h +++ b/arch/arm64/include/asm/bitops.h @@ -17,17 +17,8 @@ #define __ASM_BITOPS_H #include <linux/compiler.h> - #include <asm/barrier.h> -/* - * clear_bit may not imply a memory barrier - */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif - #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly #endif diff --git a/arch/arm64/include/asm/cpu_ops.h b/arch/arm64/include/asm/cpu_ops.h index 152413076503..d7b4b38a8e86 100644 --- a/arch/arm64/include/asm/cpu_ops.h +++ b/arch/arm64/include/asm/cpu_ops.h @@ -39,6 +39,7 @@ struct device_node; * from the cpu to be killed. * @cpu_die: Makes a cpu leave the kernel. Must not fail. Called from the * cpu being killed. + * @cpu_kill: Ensures a cpu has left the kernel. Called from another cpu. * @cpu_suspend: Suspends a cpu and saves the required context. May fail owing * to wrong parameters or error conditions. Called from the * CPU being suspended. Must be called with IRQs disabled. @@ -52,6 +53,7 @@ struct cpu_operations { #ifdef CONFIG_HOTPLUG_CPU int (*cpu_disable)(unsigned int cpu); void (*cpu_die)(unsigned int cpu); + int (*cpu_kill)(unsigned int cpu); #endif #ifdef CONFIG_ARM64_CPU_SUSPEND int (*cpu_suspend)(unsigned long); diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index c404fb0df3a6..27f54a7cc81b 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -41,6 +41,7 @@ #define ARM_CPU_PART_AEM_V8 0xD0F0 #define ARM_CPU_PART_FOUNDATION 0xD000 +#define ARM_CPU_PART_CORTEX_A53 0xD030 #define ARM_CPU_PART_CORTEX_A57 0xD070 #define APM_CPU_PART_POTENZA 0x0000 diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h new file mode 100644 index 000000000000..5a46c4e7f539 --- /dev/null +++ b/arch/arm64/include/asm/efi.h @@ -0,0 +1,14 @@ +#ifndef _ASM_EFI_H +#define _ASM_EFI_H + +#include <asm/io.h> + +#ifdef CONFIG_EFI +extern void efi_init(void); +extern void efi_idmap_init(void); +#else +#define efi_init() +#define efi_idmap_init() +#endif + +#endif /* _ASM_EFI_H */ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 0a1d69751562..92242ce06309 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -39,7 +39,7 @@ #include <kvm/arm_vgic.h> #include <kvm/arm_arch_timer.h> -#define KVM_VCPU_MAX_FEATURES 2 +#define KVM_VCPU_MAX_FEATURES 3 struct kvm_vcpu; int kvm_target_cpu(void); diff --git a/arch/arm64/include/asm/kvm_psci.h b/arch/arm64/include/asm/kvm_psci.h index e301a4816355..bc39e557c56c 100644 --- a/arch/arm64/include/asm/kvm_psci.h +++ b/arch/arm64/include/asm/kvm_psci.h @@ -18,6 +18,10 @@ #ifndef __ARM64_KVM_PSCI_H__ #define __ARM64_KVM_PSCI_H__ -bool kvm_psci_call(struct kvm_vcpu *vcpu); +#define KVM_ARM_PSCI_0_1 1 +#define KVM_ARM_PSCI_0_2 2 + +int kvm_psci_version(struct kvm_vcpu *vcpu); +int kvm_psci_call(struct kvm_vcpu *vcpu); #endif /* __ARM64_KVM_PSCI_H__ */ diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h index aff0292c8f4d..c2f006c48bdb 100644 --- a/arch/arm64/include/asm/mmu.h +++ b/arch/arm64/include/asm/mmu.h @@ -31,5 +31,7 @@ extern void paging_init(void); extern void setup_mm_for_reboot(void); extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt); extern void init_mem_pgprot(void); +/* create an identity mapping for memory (or io if map_io is true) */ +extern void create_id_mapping(phys_addr_t addr, phys_addr_t size, int map_io); #endif diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 90c811f05a2e..e2f96748859b 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -266,7 +266,7 @@ static inline pmd_t pte_pmd(pte_t pte) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) -#define set_pmd_at(mm, addr, pmdp, pmd) set_pmd(pmdp, pmd) +#define set_pmd_at(mm, addr, pmdp, pmd) set_pte_at(mm, addr, (pte_t *)pmdp, pmd_pte(pmd)) static inline int has_transparent_hugepage(void) { @@ -406,7 +406,7 @@ extern pgd_t idmap_pg_dir[PTRS_PER_PGD]; /* * Ensure that there are not more swap files than can be encoded in the kernel - * the PTEs. + * PTEs. */ #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS) diff --git a/arch/arm64/include/asm/psci.h b/arch/arm64/include/asm/psci.h index d15ab8b46336..e5312ea0ec1a 100644 --- a/arch/arm64/include/asm/psci.h +++ b/arch/arm64/include/asm/psci.h @@ -14,6 +14,6 @@ #ifndef __ASM_PSCI_H #define __ASM_PSCI_H -void psci_init(void); +int psci_init(void); #endif /* __ASM_PSCI_H */ diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h index 720e70b66ffd..7b8e3a2a00fb 100644 --- a/arch/arm64/include/asm/thread_info.h +++ b/arch/arm64/include/asm/thread_info.h @@ -95,13 +95,11 @@ static inline struct thread_info *current_thread_info(void) * TIF_NEED_RESCHED - rescheduling necessary * TIF_NOTIFY_RESUME - callback before returning to user * TIF_USEDFPU - FPU was used by this task this quantum (SMP) - * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_SIGPENDING 0 #define TIF_NEED_RESCHED 1 #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 -#define TIF_POLLING_NRFLAG 16 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_FREEZE 19 #define TIF_RESTORE_SIGMASK 20 diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h index eaf54a30bedc..e633ff8cdec8 100644 --- a/arch/arm64/include/uapi/asm/kvm.h +++ b/arch/arm64/include/uapi/asm/kvm.h @@ -31,6 +31,7 @@ #define KVM_NR_SPSR 5 #ifndef __ASSEMBLY__ +#include <linux/psci.h> #include <asm/types.h> #include <asm/ptrace.h> @@ -56,8 +57,9 @@ struct kvm_regs { #define KVM_ARM_TARGET_FOUNDATION_V8 1 #define KVM_ARM_TARGET_CORTEX_A57 2 #define KVM_ARM_TARGET_XGENE_POTENZA 3 +#define KVM_ARM_TARGET_CORTEX_A53 4 -#define KVM_ARM_NUM_TARGETS 4 +#define KVM_ARM_NUM_TARGETS 5 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */ #define KVM_ARM_DEVICE_TYPE_SHIFT 0 @@ -77,6 +79,7 @@ struct kvm_regs { #define KVM_ARM_VCPU_POWER_OFF 0 /* CPU is started in OFF state */ #define KVM_ARM_VCPU_EL1_32BIT 1 /* CPU running a 32bit VM */ +#define KVM_ARM_VCPU_PSCI_0_2 2 /* CPU uses PSCI v0.2 */ struct kvm_vcpu_init { __u32 target; @@ -186,10 +189,10 @@ struct kvm_arch_memory_slot { #define KVM_PSCI_FN_CPU_ON KVM_PSCI_FN(2) #define KVM_PSCI_FN_MIGRATE KVM_PSCI_FN(3) -#define KVM_PSCI_RET_SUCCESS 0 -#define KVM_PSCI_RET_NI ((unsigned long)-1) -#define KVM_PSCI_RET_INVAL ((unsigned long)-2) -#define KVM_PSCI_RET_DENIED ((unsigned long)-3) +#define KVM_PSCI_RET_SUCCESS PSCI_RET_SUCCESS +#define KVM_PSCI_RET_NI PSCI_RET_NOT_SUPPORTED +#define KVM_PSCI_RET_INVAL PSCI_RET_INVALID_PARAMS +#define KVM_PSCI_RET_DENIED PSCI_RET_DENIED #endif diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile index 7d811d9522bc..ba5e17a522d5 100644 --- a/arch/arm64/kernel/Makefile +++ b/arch/arm64/kernel/Makefile @@ -4,6 +4,8 @@ CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) +CFLAGS_efi-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET) \ + -I$(src)/../../../scripts/dtc/libfdt # Object file lists. arm64-obj-y := cputable.o debug-monitors.o entry.o irq.o fpsimd.o \ @@ -18,10 +20,10 @@ arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o -arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o arm64-obj-$(CONFIG_KGDB) += kgdb.o +arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o obj-y += $(arm64-obj-y) vdso/ obj-m += $(arm64-obj-m) diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c deleted file mode 100644 index 2dc36d00addf..000000000000 --- a/arch/arm64/kernel/early_printk.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Earlyprintk support. - * - * Copyright (C) 2012 ARM Ltd. - * Author: Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/kernel.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/io.h> - -#include <linux/amba/serial.h> -#include <linux/serial_reg.h> - -#include <asm/fixmap.h> - -static void __iomem *early_base; -static void (*printch)(char ch); - -/* - * PL011 single character TX. - */ -static void pl011_printch(char ch) -{ - while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_TXFF) - ; - writeb_relaxed(ch, early_base + UART01x_DR); - while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_BUSY) - ; -} - -/* - * Semihosting-based debug console - */ -static void smh_printch(char ch) -{ - asm volatile("mov x1, %0\n" - "mov x0, #3\n" - "hlt 0xf000\n" - : : "r" (&ch) : "x0", "x1", "memory"); -} - -/* - * 8250/16550 (8-bit aligned registers) single character TX. - */ -static void uart8250_8bit_printch(char ch) -{ - while (!(readb_relaxed(early_base + UART_LSR) & UART_LSR_THRE)) - ; - writeb_relaxed(ch, early_base + UART_TX); -} - -/* - * 8250/16550 (32-bit aligned registers) single character TX. - */ -static void uart8250_32bit_printch(char ch) -{ - while (!(readl_relaxed(early_base + (UART_LSR << 2)) & UART_LSR_THRE)) - ; - writel_relaxed(ch, early_base + (UART_TX << 2)); -} - -struct earlycon_match { - const char *name; - void (*printch)(char ch); -}; - -static const struct earlycon_match earlycon_match[] __initconst = { - { .name = "pl011", .printch = pl011_printch, }, - { .name = "smh", .printch = smh_printch, }, - { .name = "uart8250-8bit", .printch = uart8250_8bit_printch, }, - { .name = "uart8250-32bit", .printch = uart8250_32bit_printch, }, - {} -}; - -static void early_write(struct console *con, const char *s, unsigned n) -{ - while (n-- > 0) { - if (*s == '\n') - printch('\r'); - printch(*s); - s++; - } -} - -static struct console early_console_dev = { - .name = "earlycon", - .write = early_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -/* - * Parse earlyprintk=... parameter in the format: - * - * <name>[,<addr>][,<options>] - * - * and register the early console. It is assumed that the UART has been - * initialised by the bootloader already. - */ -static int __init setup_early_printk(char *buf) -{ - const struct earlycon_match *match = earlycon_match; - phys_addr_t paddr = 0; - - if (!buf) { - pr_warning("No earlyprintk arguments passed.\n"); - return 0; - } - - while (match->name) { - size_t len = strlen(match->name); - if (!strncmp(buf, match->name, len)) { - buf += len; - break; - } - match++; - } - if (!match->name) { - pr_warning("Unknown earlyprintk arguments: %s\n", buf); - return 0; - } - - /* I/O address */ - if (!strncmp(buf, ",0x", 3)) { - char *e; - paddr = simple_strtoul(buf + 1, &e, 16); - buf = e; - } - /* no options parsing yet */ - - if (paddr) - early_base = (void __iomem *)set_fixmap_offset_io(FIX_EARLYCON_MEM_BASE, paddr); - - printch = match->printch; - early_console = &early_console_dev; - register_console(&early_console_dev); - - return 0; -} - -early_param("earlyprintk", setup_early_printk); diff --git a/arch/arm64/kernel/efi-entry.S b/arch/arm64/kernel/efi-entry.S new file mode 100644 index 000000000000..66716c9b9e5f --- /dev/null +++ b/arch/arm64/kernel/efi-entry.S @@ -0,0 +1,109 @@ +/* + * EFI entry point. + * + * Copyright (C) 2013, 2014 Red Hat, Inc. + * Author: Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/linkage.h> +#include <linux/init.h> + +#include <asm/assembler.h> + +#define EFI_LOAD_ERROR 0x8000000000000001 + + __INIT + + /* + * We arrive here from the EFI boot manager with: + * + * * CPU in little-endian mode + * * MMU on with identity-mapped RAM + * * Icache and Dcache on + * + * We will most likely be running from some place other than where + * we want to be. The kernel image wants to be placed at TEXT_OFFSET + * from start of RAM. + */ +ENTRY(efi_stub_entry) + /* + * Create a stack frame to save FP/LR with extra space + * for image_addr variable passed to efi_entry(). + */ + stp x29, x30, [sp, #-32]! + + /* + * Call efi_entry to do the real work. + * x0 and x1 are already set up by firmware. Current runtime + * address of image is calculated and passed via *image_addr. + * + * unsigned long efi_entry(void *handle, + * efi_system_table_t *sys_table, + * unsigned long *image_addr) ; + */ + adrp x8, _text + add x8, x8, #:lo12:_text + add x2, sp, 16 + str x8, [x2] + bl efi_entry + cmn x0, #1 + b.eq efi_load_fail + + /* + * efi_entry() will have relocated the kernel image if necessary + * and we return here with device tree address in x0 and the kernel + * entry point stored at *image_addr. Save those values in registers + * which are callee preserved. + */ + mov x20, x0 // DTB address + ldr x0, [sp, #16] // relocated _text address + mov x21, x0 + + /* + * Flush dcache covering current runtime addresses + * of kernel text/data. Then flush all of icache. + */ + adrp x1, _text + add x1, x1, #:lo12:_text + adrp x2, _edata + add x2, x2, #:lo12:_edata + sub x1, x2, x1 + + bl __flush_dcache_area + ic ialluis + + /* Turn off Dcache and MMU */ + mrs x0, CurrentEL + cmp x0, #PSR_MODE_EL2t + ccmp x0, #PSR_MODE_EL2h, #0x4, ne + b.ne 1f + mrs x0, sctlr_el2 + bic x0, x0, #1 << 0 // clear SCTLR.M + bic x0, x0, #1 << 2 // clear SCTLR.C + msr sctlr_el2, x0 + isb + b 2f +1: + mrs x0, sctlr_el1 + bic x0, x0, #1 << 0 // clear SCTLR.M + bic x0, x0, #1 << 2 // clear SCTLR.C + msr sctlr_el1, x0 + isb +2: + /* Jump to kernel entry point */ + mov x0, x20 + mov x1, xzr + mov x2, xzr + mov x3, xzr + br x21 + +efi_load_fail: + mov x0, #EFI_LOAD_ERROR + ldp x29, x30, [sp], #32 + ret + +ENDPROC(efi_stub_entry) diff --git a/arch/arm64/kernel/efi-stub.c b/arch/arm64/kernel/efi-stub.c new file mode 100644 index 000000000000..60e98a639ac5 --- /dev/null +++ b/arch/arm64/kernel/efi-stub.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2013, 2014 Linaro Ltd; <roy.franz@linaro.org> + * + * This file implements the EFI boot stub for the arm64 kernel. + * Adapted from ARM version by Mark Salter <msalter@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#include <linux/efi.h> +#include <linux/libfdt.h> +#include <asm/sections.h> +#include <generated/compile.h> +#include <generated/utsrelease.h> + +/* + * AArch64 requires the DTB to be 8-byte aligned in the first 512MiB from + * start of kernel and may not cross a 2MiB boundary. We set alignment to + * 2MiB so we know it won't cross a 2MiB boundary. + */ +#define EFI_FDT_ALIGN SZ_2M /* used by allocate_new_fdt_and_exit_boot() */ +#define MAX_FDT_OFFSET SZ_512M + +#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__) + +static void efi_char16_printk(efi_system_table_t *sys_table_arg, + efi_char16_t *str); + +static efi_status_t efi_open_volume(efi_system_table_t *sys_table, + void *__image, void **__fh); +static efi_status_t efi_file_close(void *handle); + +static efi_status_t +efi_file_read(void *handle, unsigned long *size, void *addr); + +static efi_status_t +efi_file_size(efi_system_table_t *sys_table, void *__fh, + efi_char16_t *filename_16, void **handle, u64 *file_sz); + +/* Include shared EFI stub code */ +#include "../../../drivers/firmware/efi/efi-stub-helper.c" +#include "../../../drivers/firmware/efi/fdt.c" +#include "../../../drivers/firmware/efi/arm-stub.c" + + +static efi_status_t handle_kernel_image(efi_system_table_t *sys_table, + unsigned long *image_addr, + unsigned long *image_size, + unsigned long *reserve_addr, + unsigned long *reserve_size, + unsigned long dram_base, + efi_loaded_image_t *image) +{ + efi_status_t status; + unsigned long kernel_size, kernel_memsize = 0; + + /* Relocate the image, if required. */ + kernel_size = _edata - _text; + if (*image_addr != (dram_base + TEXT_OFFSET)) { + kernel_memsize = kernel_size + (_end - _edata); + status = efi_relocate_kernel(sys_table, image_addr, + kernel_size, kernel_memsize, + dram_base + TEXT_OFFSET, + PAGE_SIZE); + if (status != EFI_SUCCESS) { + pr_efi_err(sys_table, "Failed to relocate kernel\n"); + return status; + } + if (*image_addr != (dram_base + TEXT_OFFSET)) { + pr_efi_err(sys_table, "Failed to alloc kernel memory\n"); + efi_free(sys_table, kernel_memsize, *image_addr); + return EFI_ERROR; + } + *image_size = kernel_memsize; + } + + + return EFI_SUCCESS; +} diff --git a/arch/arm64/kernel/efi.c b/arch/arm64/kernel/efi.c new file mode 100644 index 000000000000..14db1f6e8d7f --- /dev/null +++ b/arch/arm64/kernel/efi.c @@ -0,0 +1,469 @@ +/* + * Extensible Firmware Interface + * + * Based on Extensible Firmware Interface Specification version 2.4 + * + * Copyright (C) 2013, 2014 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/efi.h> +#include <linux/export.h> +#include <linux/memblock.h> +#include <linux/bootmem.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/sched.h> +#include <linux/slab.h> + +#include <asm/cacheflush.h> +#include <asm/efi.h> +#include <asm/tlbflush.h> +#include <asm/mmu_context.h> + +struct efi_memory_map memmap; + +static efi_runtime_services_t *runtime; + +static u64 efi_system_table; + +static int uefi_debug __initdata; +static int __init uefi_debug_setup(char *str) +{ + uefi_debug = 1; + + return 0; +} +early_param("uefi_debug", uefi_debug_setup); + +static int __init is_normal_ram(efi_memory_desc_t *md) +{ + if (md->attribute & EFI_MEMORY_WB) + return 1; + return 0; +} + +static void __init efi_setup_idmap(void) +{ + struct memblock_region *r; + efi_memory_desc_t *md; + u64 paddr, npages, size; + + for_each_memblock(memory, r) + create_id_mapping(r->base, r->size, 0); + + /* map runtime io spaces */ + for_each_efi_memory_desc(&memmap, md) { + if (!(md->attribute & EFI_MEMORY_RUNTIME) || is_normal_ram(md)) + continue; + paddr = md->phys_addr; + npages = md->num_pages; + memrange_efi_to_native(&paddr, &npages); + size = npages << PAGE_SHIFT; + create_id_mapping(paddr, size, 1); + } +} + +static int __init uefi_init(void) +{ + efi_char16_t *c16; + char vendor[100] = "unknown"; + int i, retval; + + efi.systab = early_memremap(efi_system_table, + sizeof(efi_system_table_t)); + if (efi.systab == NULL) { + pr_warn("Unable to map EFI system table.\n"); + return -ENOMEM; + } + + set_bit(EFI_BOOT, &efi.flags); + set_bit(EFI_64BIT, &efi.flags); + + /* + * Verify the EFI Table + */ + if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) { + pr_err("System table signature incorrect\n"); + return -EINVAL; + } + if ((efi.systab->hdr.revision >> 16) < 2) + pr_warn("Warning: EFI system table version %d.%02d, expected 2.00 or greater\n", + efi.systab->hdr.revision >> 16, + efi.systab->hdr.revision & 0xffff); + + /* Show what we know for posterity */ + c16 = early_memremap(efi.systab->fw_vendor, + sizeof(vendor)); + if (c16) { + for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i) + vendor[i] = c16[i]; + vendor[i] = '\0'; + } + + pr_info("EFI v%u.%.02u by %s\n", + efi.systab->hdr.revision >> 16, + efi.systab->hdr.revision & 0xffff, vendor); + + retval = efi_config_init(NULL); + if (retval == 0) + set_bit(EFI_CONFIG_TABLES, &efi.flags); + + early_memunmap(c16, sizeof(vendor)); + early_memunmap(efi.systab, sizeof(efi_system_table_t)); + + return retval; +} + +static __initdata char memory_type_name[][32] = { + {"Reserved"}, + {"Loader Code"}, + {"Loader Data"}, + {"Boot Code"}, + {"Boot Data"}, + {"Runtime Code"}, + {"Runtime Data"}, + {"Conventional Memory"}, + {"Unusable Memory"}, + {"ACPI Reclaim Memory"}, + {"ACPI Memory NVS"}, + {"Memory Mapped I/O"}, + {"MMIO Port Space"}, + {"PAL Code"}, +}; + +/* + * Return true for RAM regions we want to permanently reserve. + */ +static __init int is_reserve_region(efi_memory_desc_t *md) +{ + if (!is_normal_ram(md)) + return 0; + + if (md->attribute & EFI_MEMORY_RUNTIME) + return 1; + + if (md->type == EFI_ACPI_RECLAIM_MEMORY || + md->type == EFI_RESERVED_TYPE) + return 1; + + return 0; +} + +static __init void reserve_regions(void) +{ + efi_memory_desc_t *md; + u64 paddr, npages, size; + + if (uefi_debug) + pr_info("Processing EFI memory map:\n"); + + for_each_efi_memory_desc(&memmap, md) { + paddr = md->phys_addr; + npages = md->num_pages; + + if (uefi_debug) + pr_info(" 0x%012llx-0x%012llx [%s]", + paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, + memory_type_name[md->type]); + + memrange_efi_to_native(&paddr, &npages); + size = npages << PAGE_SHIFT; + + if (is_normal_ram(md)) + early_init_dt_add_memory_arch(paddr, size); + + if (is_reserve_region(md) || + md->type == EFI_BOOT_SERVICES_CODE || + md->type == EFI_BOOT_SERVICES_DATA) { + memblock_reserve(paddr, size); + if (uefi_debug) + pr_cont("*"); + } + + if (uefi_debug) + pr_cont("\n"); + } +} + + +static u64 __init free_one_region(u64 start, u64 end) +{ + u64 size = end - start; + + if (uefi_debug) + pr_info(" EFI freeing: 0x%012llx-0x%012llx\n", start, end - 1); + + free_bootmem_late(start, size); + return size; +} + +static u64 __init free_region(u64 start, u64 end) +{ + u64 map_start, map_end, total = 0; + + if (end <= start) + return total; + + map_start = (u64)memmap.phys_map; + map_end = PAGE_ALIGN(map_start + (memmap.map_end - memmap.map)); + map_start &= PAGE_MASK; + + if (start < map_end && end > map_start) { + /* region overlaps UEFI memmap */ + if (start < map_start) + total += free_one_region(start, map_start); + + if (map_end < end) + total += free_one_region(map_end, end); + } else + total += free_one_region(start, end); + + return total; +} + +static void __init free_boot_services(void) +{ + u64 total_freed = 0; + u64 keep_end, free_start, free_end; + efi_memory_desc_t *md; + + /* + * If kernel uses larger pages than UEFI, we have to be careful + * not to inadvertantly free memory we want to keep if there is + * overlap at the kernel page size alignment. We do not want to + * free is_reserve_region() memory nor the UEFI memmap itself. + * + * The memory map is sorted, so we keep track of the end of + * any previous region we want to keep, remember any region + * we want to free and defer freeing it until we encounter + * the next region we want to keep. This way, before freeing + * it, we can clip it as needed to avoid freeing memory we + * want to keep for UEFI. + */ + + keep_end = 0; + free_start = 0; + + for_each_efi_memory_desc(&memmap, md) { + u64 paddr, npages, size; + + if (is_reserve_region(md)) { + /* + * We don't want to free any memory from this region. + */ + if (free_start) { + /* adjust free_end then free region */ + if (free_end > md->phys_addr) + free_end -= PAGE_SIZE; + total_freed += free_region(free_start, free_end); + free_start = 0; + } + keep_end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT); + continue; + } + + if (md->type != EFI_BOOT_SERVICES_CODE && + md->type != EFI_BOOT_SERVICES_DATA) { + /* no need to free this region */ + continue; + } + + /* + * We want to free memory from this region. + */ + paddr = md->phys_addr; + npages = md->num_pages; + memrange_efi_to_native(&paddr, &npages); + size = npages << PAGE_SHIFT; + + if (free_start) { + if (paddr <= free_end) + free_end = paddr + size; + else { + total_freed += free_region(free_start, free_end); + free_start = paddr; + free_end = paddr + size; + } + } else { + free_start = paddr; + free_end = paddr + size; + } + if (free_start < keep_end) { + free_start += PAGE_SIZE; + if (free_start >= free_end) + free_start = 0; + } + } + if (free_start) + total_freed += free_region(free_start, free_end); + + if (total_freed) + pr_info("Freed 0x%llx bytes of EFI boot services memory", + total_freed); +} + +void __init efi_init(void) +{ + struct efi_fdt_params params; + + /* Grab UEFI information placed in FDT by stub */ + if (!efi_get_fdt_params(¶ms, uefi_debug)) + return; + + efi_system_table = params.system_table; + + memblock_reserve(params.mmap & PAGE_MASK, + PAGE_ALIGN(params.mmap_size + (params.mmap & ~PAGE_MASK))); + memmap.phys_map = (void *)params.mmap; + memmap.map = early_memremap(params.mmap, params.mmap_size); + memmap.map_end = memmap.map + params.mmap_size; + memmap.desc_size = params.desc_size; + memmap.desc_version = params.desc_ver; + + if (uefi_init() < 0) + return; + + reserve_regions(); +} + +void __init efi_idmap_init(void) +{ + if (!efi_enabled(EFI_BOOT)) + return; + + /* boot time idmap_pg_dir is incomplete, so fill in missing parts */ + efi_setup_idmap(); +} + +static int __init remap_region(efi_memory_desc_t *md, void **new) +{ + u64 paddr, vaddr, npages, size; + + paddr = md->phys_addr; + npages = md->num_pages; + memrange_efi_to_native(&paddr, &npages); + size = npages << PAGE_SHIFT; + + if (is_normal_ram(md)) + vaddr = (__force u64)ioremap_cache(paddr, size); + else + vaddr = (__force u64)ioremap(paddr, size); + + if (!vaddr) { + pr_err("Unable to remap 0x%llx pages @ %p\n", + npages, (void *)paddr); + return 0; + } + + /* adjust for any rounding when EFI and system pagesize differs */ + md->virt_addr = vaddr + (md->phys_addr - paddr); + + if (uefi_debug) + pr_info(" EFI remap 0x%012llx => %p\n", + md->phys_addr, (void *)md->virt_addr); + + memcpy(*new, md, memmap.desc_size); + *new += memmap.desc_size; + + return 1; +} + +/* + * Switch UEFI from an identity map to a kernel virtual map + */ +static int __init arm64_enter_virtual_mode(void) +{ + efi_memory_desc_t *md; + phys_addr_t virtmap_phys; + void *virtmap, *virt_md; + efi_status_t status; + u64 mapsize; + int count = 0; + unsigned long flags; + + if (!efi_enabled(EFI_BOOT)) { + pr_info("EFI services will not be available.\n"); + return -1; + } + + pr_info("Remapping and enabling EFI services.\n"); + + /* replace early memmap mapping with permanent mapping */ + mapsize = memmap.map_end - memmap.map; + early_memunmap(memmap.map, mapsize); + memmap.map = (__force void *)ioremap_cache((phys_addr_t)memmap.phys_map, + mapsize); + memmap.map_end = memmap.map + mapsize; + + efi.memmap = &memmap; + + /* Map the runtime regions */ + virtmap = kmalloc(mapsize, GFP_KERNEL); + if (!virtmap) { + pr_err("Failed to allocate EFI virtual memmap\n"); + return -1; + } + virtmap_phys = virt_to_phys(virtmap); + virt_md = virtmap; + + for_each_efi_memory_desc(&memmap, md) { + if (!(md->attribute & EFI_MEMORY_RUNTIME)) + continue; + if (remap_region(md, &virt_md)) + ++count; + } + + efi.systab = (__force void *)efi_lookup_mapped_addr(efi_system_table); + if (efi.systab) + set_bit(EFI_SYSTEM_TABLES, &efi.flags); + + local_irq_save(flags); + cpu_switch_mm(idmap_pg_dir, &init_mm); + + /* Call SetVirtualAddressMap with the physical address of the map */ + runtime = efi.systab->runtime; + efi.set_virtual_address_map = runtime->set_virtual_address_map; + + status = efi.set_virtual_address_map(count * memmap.desc_size, + memmap.desc_size, + memmap.desc_version, + (efi_memory_desc_t *)virtmap_phys); + cpu_set_reserved_ttbr0(); + flush_tlb_all(); + local_irq_restore(flags); + + kfree(virtmap); + + free_boot_services(); + + if (status != EFI_SUCCESS) { + pr_err("Failed to set EFI virtual address map! [%lx]\n", + status); + return -1; + } + + /* Set up runtime services function pointers */ + runtime = efi.systab->runtime; + efi.get_time = runtime->get_time; + efi.set_time = runtime->set_time; + efi.get_wakeup_time = runtime->get_wakeup_time; + efi.set_wakeup_time = runtime->set_wakeup_time; + efi.get_variable = runtime->get_variable; + efi.get_next_variable = runtime->get_next_variable; + efi.set_variable = runtime->set_variable; + efi.query_variable_info = runtime->query_variable_info; + efi.update_capsule = runtime->update_capsule; + efi.query_capsule_caps = runtime->query_capsule_caps; + efi.get_next_high_mono_count = runtime->get_next_high_mono_count; + efi.reset_system = runtime->reset_system; + + set_bit(EFI_RUNTIME_SERVICES, &efi.flags); + + return 0; +} +early_initcall(arm64_enter_virtual_mode); diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S index 0fd565000772..738291b5be29 100644 --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -108,8 +108,18 @@ /* * DO NOT MODIFY. Image header expected by Linux boot-loaders. */ +#ifdef CONFIG_EFI +efi_head: + /* + * This add instruction has no meaningful effect except that + * its opcode forms the magic "MZ" signature required by UEFI. + */ + add x13, x18, #0x16 + b stext +#else b stext // branch to kernel start, magic .long 0 // reserved +#endif .quad TEXT_OFFSET // Image load offset from start of RAM .quad 0 // reserved .quad 0 // reserved @@ -120,7 +130,109 @@ .byte 0x52 .byte 0x4d .byte 0x64 +#ifdef CONFIG_EFI + .long pe_header - efi_head // Offset to the PE header. +#else .word 0 // reserved +#endif + +#ifdef CONFIG_EFI + .align 3 +pe_header: + .ascii "PE" + .short 0 +coff_header: + .short 0xaa64 // AArch64 + .short 2 // nr_sections + .long 0 // TimeDateStamp + .long 0 // PointerToSymbolTable + .long 1 // NumberOfSymbols + .short section_table - optional_header // SizeOfOptionalHeader + .short 0x206 // Characteristics. + // IMAGE_FILE_DEBUG_STRIPPED | + // IMAGE_FILE_EXECUTABLE_IMAGE | + // IMAGE_FILE_LINE_NUMS_STRIPPED +optional_header: + .short 0x20b // PE32+ format + .byte 0x02 // MajorLinkerVersion + .byte 0x14 // MinorLinkerVersion + .long _edata - stext // SizeOfCode + .long 0 // SizeOfInitializedData + .long 0 // SizeOfUninitializedData + .long efi_stub_entry - efi_head // AddressOfEntryPoint + .long stext - efi_head // BaseOfCode + +extra_header_fields: + .quad 0 // ImageBase + .long 0x20 // SectionAlignment + .long 0x8 // FileAlignment + .short 0 // MajorOperatingSystemVersion + .short 0 // MinorOperatingSystemVersion + .short 0 // MajorImageVersion + .short 0 // MinorImageVersion + .short 0 // MajorSubsystemVersion + .short 0 // MinorSubsystemVersion + .long 0 // Win32VersionValue + + .long _edata - efi_head // SizeOfImage + + // Everything before the kernel image is considered part of the header + .long stext - efi_head // SizeOfHeaders + .long 0 // CheckSum + .short 0xa // Subsystem (EFI application) + .short 0 // DllCharacteristics + .quad 0 // SizeOfStackReserve + .quad 0 // SizeOfStackCommit + .quad 0 // SizeOfHeapReserve + .quad 0 // SizeOfHeapCommit + .long 0 // LoaderFlags + .long 0x6 // NumberOfRvaAndSizes + + .quad 0 // ExportTable + .quad 0 // ImportTable + .quad 0 // ResourceTable + .quad 0 // ExceptionTable + .quad 0 // CertificationTable + .quad 0 // BaseRelocationTable + + // Section table +section_table: + + /* + * The EFI application loader requires a relocation section + * because EFI applications must be relocatable. This is a + * dummy section as far as we are concerned. + */ + .ascii ".reloc" + .byte 0 + .byte 0 // end of 0 padding of section name + .long 0 + .long 0 + .long 0 // SizeOfRawData + .long 0 // PointerToRawData + .long 0 // PointerToRelocations + .long 0 // PointerToLineNumbers + .short 0 // NumberOfRelocations + .short 0 // NumberOfLineNumbers + .long 0x42100040 // Characteristics (section flags) + + + .ascii ".text" + .byte 0 + .byte 0 + .byte 0 // end of 0 padding of section name + .long _edata - stext // VirtualSize + .long stext - efi_head // VirtualAddress + .long _edata - stext // SizeOfRawData + .long stext - efi_head // PointerToRawData + + .long 0 // PointerToRelocations (0 for executables) + .long 0 // PointerToLineNumbers (0 for executables) + .short 0 // NumberOfRelocations (0 for executables) + .short 0 // NumberOfLineNumbers (0 for executables) + .long 0xe0500020 // Characteristics (section flags) + .align 5 +#endif ENTRY(stext) mov x21, x0 // x21=FDT diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index ea4828a4aa96..9e9798f91172 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -18,12 +18,17 @@ #include <linux/init.h> #include <linux/of.h> #include <linux/smp.h> +#include <linux/reboot.h> +#include <linux/pm.h> +#include <linux/delay.h> +#include <uapi/linux/psci.h> #include <asm/compiler.h> #include <asm/cpu_ops.h> #include <asm/errno.h> #include <asm/psci.h> #include <asm/smp_plat.h> +#include <asm/system_misc.h> #define PSCI_POWER_STATE_TYPE_STANDBY 0 #define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 @@ -40,58 +45,52 @@ struct psci_operations { int (*cpu_off)(struct psci_power_state state); int (*cpu_on)(unsigned long cpuid, unsigned long entry_point); int (*migrate)(unsigned long cpuid); + int (*affinity_info)(unsigned long target_affinity, + unsigned long lowest_affinity_level); + int (*migrate_info_type)(void); }; static struct psci_operations psci_ops; static int (*invoke_psci_fn)(u64, u64, u64, u64); +typedef int (*psci_initcall_t)(const struct device_node *); enum psci_function { PSCI_FN_CPU_SUSPEND, PSCI_FN_CPU_ON, PSCI_FN_CPU_OFF, PSCI_FN_MIGRATE, + PSCI_FN_AFFINITY_INFO, + PSCI_FN_MIGRATE_INFO_TYPE, PSCI_FN_MAX, }; static u32 psci_function_id[PSCI_FN_MAX]; -#define PSCI_RET_SUCCESS 0 -#define PSCI_RET_EOPNOTSUPP -1 -#define PSCI_RET_EINVAL -2 -#define PSCI_RET_EPERM -3 - static int psci_to_linux_errno(int errno) { switch (errno) { case PSCI_RET_SUCCESS: return 0; - case PSCI_RET_EOPNOTSUPP: + case PSCI_RET_NOT_SUPPORTED: return -EOPNOTSUPP; - case PSCI_RET_EINVAL: + case PSCI_RET_INVALID_PARAMS: return -EINVAL; - case PSCI_RET_EPERM: + case PSCI_RET_DENIED: return -EPERM; }; return -EINVAL; } -#define PSCI_POWER_STATE_ID_MASK 0xffff -#define PSCI_POWER_STATE_ID_SHIFT 0 -#define PSCI_POWER_STATE_TYPE_MASK 0x1 -#define PSCI_POWER_STATE_TYPE_SHIFT 16 -#define PSCI_POWER_STATE_AFFL_MASK 0x3 -#define PSCI_POWER_STATE_AFFL_SHIFT 24 - static u32 psci_power_state_pack(struct psci_power_state state) { - return ((state.id & PSCI_POWER_STATE_ID_MASK) - << PSCI_POWER_STATE_ID_SHIFT) | - ((state.type & PSCI_POWER_STATE_TYPE_MASK) - << PSCI_POWER_STATE_TYPE_SHIFT) | - ((state.affinity_level & PSCI_POWER_STATE_AFFL_MASK) - << PSCI_POWER_STATE_AFFL_SHIFT); + return ((state.id << PSCI_0_2_POWER_STATE_ID_SHIFT) + & PSCI_0_2_POWER_STATE_ID_MASK) | + ((state.type << PSCI_0_2_POWER_STATE_TYPE_SHIFT) + & PSCI_0_2_POWER_STATE_TYPE_MASK) | + ((state.affinity_level << PSCI_0_2_POWER_STATE_AFFL_SHIFT) + & PSCI_0_2_POWER_STATE_AFFL_MASK); } /* @@ -128,6 +127,14 @@ static noinline int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, return function_id; } +static int psci_get_version(void) +{ + int err; + + err = invoke_psci_fn(PSCI_0_2_FN_PSCI_VERSION, 0, 0, 0); + return err; +} + static int psci_cpu_suspend(struct psci_power_state state, unsigned long entry_point) { @@ -171,26 +178,36 @@ static int psci_migrate(unsigned long cpuid) return psci_to_linux_errno(err); } -static const struct of_device_id psci_of_match[] __initconst = { - { .compatible = "arm,psci", }, - {}, -}; +static int psci_affinity_info(unsigned long target_affinity, + unsigned long lowest_affinity_level) +{ + int err; + u32 fn; + + fn = psci_function_id[PSCI_FN_AFFINITY_INFO]; + err = invoke_psci_fn(fn, target_affinity, lowest_affinity_level, 0); + return err; +} -void __init psci_init(void) +static int psci_migrate_info_type(void) { - struct device_node *np; - const char *method; - u32 id; + int err; + u32 fn; - np = of_find_matching_node(NULL, psci_of_match); - if (!np) - return; + fn = psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE]; + err = invoke_psci_fn(fn, 0, 0, 0); + return err; +} - pr_info("probing function IDs from device-tree\n"); +static int get_set_conduit_method(struct device_node *np) +{ + const char *method; + + pr_info("probing for conduit method from DT.\n"); if (of_property_read_string(np, "method", &method)) { - pr_warning("missing \"method\" property\n"); - goto out_put_node; + pr_warn("missing \"method\" property\n"); + return -ENXIO; } if (!strcmp("hvc", method)) { @@ -198,10 +215,99 @@ void __init psci_init(void) } else if (!strcmp("smc", method)) { invoke_psci_fn = __invoke_psci_fn_smc; } else { - pr_warning("invalid \"method\" property: %s\n", method); + pr_warn("invalid \"method\" property: %s\n", method); + return -EINVAL; + } + return 0; +} + +static void psci_sys_reset(enum reboot_mode reboot_mode, const char *cmd) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0); +} + +static void psci_sys_poweroff(void) +{ + invoke_psci_fn(PSCI_0_2_FN_SYSTEM_OFF, 0, 0, 0); +} + +/* + * PSCI Function IDs for v0.2+ are well defined so use + * standard values. + */ +static int psci_0_2_init(struct device_node *np) +{ + int err, ver; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + ver = psci_get_version(); + + if (ver == PSCI_RET_NOT_SUPPORTED) { + /* PSCI v0.2 mandates implementation of PSCI_ID_VERSION. */ + pr_err("PSCI firmware does not comply with the v0.2 spec.\n"); + err = -EOPNOTSUPP; goto out_put_node; + } else { + pr_info("PSCIv%d.%d detected in firmware.\n", + PSCI_VERSION_MAJOR(ver), + PSCI_VERSION_MINOR(ver)); + + if (PSCI_VERSION_MAJOR(ver) == 0 && + PSCI_VERSION_MINOR(ver) < 2) { + err = -EINVAL; + pr_err("Conflicting PSCI version detected.\n"); + goto out_put_node; + } } + pr_info("Using standard PSCI v0.2 function IDs\n"); + psci_function_id[PSCI_FN_CPU_SUSPEND] = PSCI_0_2_FN64_CPU_SUSPEND; + psci_ops.cpu_suspend = psci_cpu_suspend; + + psci_function_id[PSCI_FN_CPU_OFF] = PSCI_0_2_FN_CPU_OFF; + psci_ops.cpu_off = psci_cpu_off; + + psci_function_id[PSCI_FN_CPU_ON] = PSCI_0_2_FN64_CPU_ON; + psci_ops.cpu_on = psci_cpu_on; + + psci_function_id[PSCI_FN_MIGRATE] = PSCI_0_2_FN64_MIGRATE; + psci_ops.migrate = psci_migrate; + + psci_function_id[PSCI_FN_AFFINITY_INFO] = PSCI_0_2_FN64_AFFINITY_INFO; + psci_ops.affinity_info = psci_affinity_info; + + psci_function_id[PSCI_FN_MIGRATE_INFO_TYPE] = + PSCI_0_2_FN_MIGRATE_INFO_TYPE; + psci_ops.migrate_info_type = psci_migrate_info_type; + + arm_pm_restart = psci_sys_reset; + + pm_power_off = psci_sys_poweroff; + +out_put_node: + of_node_put(np); + return err; +} + +/* + * PSCI < v0.2 get PSCI Function IDs via DT. + */ +static int psci_0_1_init(struct device_node *np) +{ + u32 id; + int err; + + err = get_set_conduit_method(np); + + if (err) + goto out_put_node; + + pr_info("Using PSCI v0.1 Function IDs from DT\n"); + if (!of_property_read_u32(np, "cpu_suspend", &id)) { psci_function_id[PSCI_FN_CPU_SUSPEND] = id; psci_ops.cpu_suspend = psci_cpu_suspend; @@ -224,7 +330,28 @@ void __init psci_init(void) out_put_node: of_node_put(np); - return; + return err; +} + +static const struct of_device_id psci_of_match[] __initconst = { + { .compatible = "arm,psci", .data = psci_0_1_init}, + { .compatible = "arm,psci-0.2", .data = psci_0_2_init}, + {}, +}; + +int __init psci_init(void) +{ + struct device_node *np; + const struct of_device_id *matched_np; + psci_initcall_t init_fn; + + np = of_find_matching_node_and_match(NULL, psci_of_match, &matched_np); + + if (!np) + return -ENODEV; + + init_fn = (psci_initcall_t)matched_np->data; + return init_fn(np); } #ifdef CONFIG_SMP @@ -277,6 +404,35 @@ static void cpu_psci_cpu_die(unsigned int cpu) pr_crit("unable to power off CPU%u (%d)\n", cpu, ret); } + +static int cpu_psci_cpu_kill(unsigned int cpu) +{ + int err, i; + + if (!psci_ops.affinity_info) + return 1; + /* + * cpu_kill could race with cpu_die and we can + * potentially end up declaring this cpu undead + * while it is dying. So, try again a few times. + */ + + for (i = 0; i < 10; i++) { + err = psci_ops.affinity_info(cpu_logical_map(cpu), 0); + if (err == PSCI_0_2_AFFINITY_LEVEL_OFF) { + pr_info("CPU%d killed.\n", cpu); + return 1; + } + + msleep(10); + pr_info("Retrying again to check for CPU kill\n"); + } + + pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n", + cpu, err); + /* Make op_cpu_kill() fail. */ + return 0; +} #endif const struct cpu_operations cpu_psci_ops = { @@ -287,6 +443,7 @@ const struct cpu_operations cpu_psci_ops = { #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = cpu_psci_cpu_disable, .cpu_die = cpu_psci_cpu_die, + .cpu_kill = cpu_psci_cpu_kill, #endif }; diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c index 7ec784653b29..e578171b22ff 100644 --- a/arch/arm64/kernel/setup.c +++ b/arch/arm64/kernel/setup.c @@ -41,6 +41,7 @@ #include <linux/memblock.h> #include <linux/of_fdt.h> #include <linux/of_platform.h> +#include <linux/efi.h> #include <asm/fixmap.h> #include <asm/cputype.h> @@ -55,6 +56,7 @@ #include <asm/traps.h> #include <asm/memblock.h> #include <asm/psci.h> +#include <asm/efi.h> unsigned int processor_id; EXPORT_SYMBOL(processor_id); @@ -366,11 +368,14 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + efi_init(); arm64_memblock_init(); paging_init(); request_standard_resources(); + efi_idmap_init(); + unflatten_device_tree(); psci_init(); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index f0a141dd5655..c3cb160edc69 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -228,6 +228,19 @@ int __cpu_disable(void) return 0; } +static int op_cpu_kill(unsigned int cpu) +{ + /* + * If we have no means of synchronising with the dying CPU, then assume + * that it is really dead. We can only wait for an arbitrary length of + * time and hope that it's dead, so let's skip the wait and just hope. + */ + if (!cpu_ops[cpu]->cpu_kill) + return 1; + + return cpu_ops[cpu]->cpu_kill(cpu); +} + static DECLARE_COMPLETION(cpu_died); /* @@ -241,6 +254,15 @@ void __cpu_die(unsigned int cpu) return; } pr_notice("CPU%u: shutdown\n", cpu); + + /* + * Now that the dying CPU is beyond the point of no return w.r.t. + * in-kernel synchronisation, try to get the firwmare to help us to + * verify that it has really left the kernel before we consider + * clobbering anything it might still be using. + */ + if (!op_cpu_kill(cpu)) + pr_warn("CPU%d may not have shut down cleanly\n", cpu); } /* diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c index 08745578d54d..60b5c31f3c10 100644 --- a/arch/arm64/kvm/guest.c +++ b/arch/arm64/kvm/guest.c @@ -214,6 +214,8 @@ int __attribute_const__ kvm_target_cpu(void) return KVM_ARM_TARGET_AEM_V8; case ARM_CPU_PART_FOUNDATION: return KVM_ARM_TARGET_FOUNDATION_V8; + case ARM_CPU_PART_CORTEX_A53: + return KVM_ARM_TARGET_CORTEX_A53; case ARM_CPU_PART_CORTEX_A57: return KVM_ARM_TARGET_CORTEX_A57; }; diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 7bc41eab4c64..182415e1a952 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -30,11 +30,15 @@ typedef int (*exit_handle_fn)(struct kvm_vcpu *, struct kvm_run *); static int handle_hvc(struct kvm_vcpu *vcpu, struct kvm_run *run) { - if (kvm_psci_call(vcpu)) + int ret; + + ret = kvm_psci_call(vcpu); + if (ret < 0) { + kvm_inject_undefined(vcpu); return 1; + } - kvm_inject_undefined(vcpu); - return 1; + return ret; } static int handle_smc(struct kvm_vcpu *vcpu, struct kvm_run *run) diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c index 8fe6f76b0edc..475fd2929310 100644 --- a/arch/arm64/kvm/sys_regs_generic_v8.c +++ b/arch/arm64/kvm/sys_regs_generic_v8.c @@ -88,6 +88,8 @@ static int __init sys_reg_genericv8_init(void) &genericv8_target_table); kvm_register_target_sys_reg_table(KVM_ARM_TARGET_FOUNDATION_V8, &genericv8_target_table); + kvm_register_target_sys_reg_table(KVM_ARM_TARGET_CORTEX_A53, + &genericv8_target_table); kvm_register_target_sys_reg_table(KVM_ARM_TARGET_CORTEX_A57, &genericv8_target_table); kvm_register_target_sys_reg_table(KVM_ARM_TARGET_XGENE_POTENZA, diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c index 31eb959e9aa8..023747bf4dd7 100644 --- a/arch/arm64/mm/hugetlbpage.c +++ b/arch/arm64/mm/hugetlbpage.c @@ -58,11 +58,6 @@ int pud_huge(pud_t pud) #endif } -int pmd_huge_support(void) -{ - return 1; -} - static __init int setup_hugepagesz(char *opt) { unsigned long ps = memparse(opt, &opt); diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index 51d5352e6ad5..091d428d64ac 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -126,8 +126,6 @@ static void arm64_memory_present(void) void __init arm64_memblock_init(void) { - u64 *reserve_map, base, size; - /* Register the kernel text, kernel data and initrd with memblock */ memblock_reserve(__pa(_text), _end - _text); #ifdef CONFIG_BLK_DEV_INITRD @@ -142,25 +140,6 @@ void __init arm64_memblock_init(void) memblock_reserve(__pa(swapper_pg_dir), SWAPPER_DIR_SIZE); memblock_reserve(__pa(idmap_pg_dir), IDMAP_DIR_SIZE); - /* Reserve the dtb region */ - memblock_reserve(virt_to_phys(initial_boot_params), - be32_to_cpu(initial_boot_params->totalsize)); - - /* - * Process the reserve map. This will probably overlap the initrd - * and dtb locations which are already reserved, but overlapping - * doesn't hurt anything - */ - reserve_map = ((void*)initial_boot_params) + - be32_to_cpu(initial_boot_params->off_mem_rsvmap); - while (1) { - base = be64_to_cpup(reserve_map++); - size = be64_to_cpup(reserve_map++); - if (!size) - break; - memblock_reserve(base, size); - } - early_init_fdt_scan_reserved_mem(); dma_contiguous_reserve(0); diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c index 0a472c41a67f..4a829a210bb6 100644 --- a/arch/arm64/mm/mmu.c +++ b/arch/arm64/mm/mmu.c @@ -168,7 +168,8 @@ static void __init *early_alloc(unsigned long sz) } static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, - unsigned long end, unsigned long pfn) + unsigned long end, unsigned long pfn, + pgprot_t prot) { pte_t *pte; @@ -180,16 +181,28 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr, pte = pte_offset_kernel(pmd, addr); do { - set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC)); + set_pte(pte, pfn_pte(pfn, prot)); pfn++; } while (pte++, addr += PAGE_SIZE, addr != end); } static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, - unsigned long end, phys_addr_t phys) + unsigned long end, phys_addr_t phys, + int map_io) { pmd_t *pmd; unsigned long next; + pmdval_t prot_sect; + pgprot_t prot_pte; + + if (map_io) { + prot_sect = PMD_TYPE_SECT | PMD_SECT_AF | + PMD_ATTRINDX(MT_DEVICE_nGnRE); + prot_pte = __pgprot(PROT_DEVICE_nGnRE); + } else { + prot_sect = prot_sect_kernel; + prot_pte = PAGE_KERNEL_EXEC; + } /* * Check for initial section mappings in the pgd/pud and remove them. @@ -205,7 +218,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, /* try section mapping first */ if (((addr | next | phys) & ~SECTION_MASK) == 0) { pmd_t old_pmd =*pmd; - set_pmd(pmd, __pmd(phys | prot_sect_kernel)); + set_pmd(pmd, __pmd(phys | prot_sect)); /* * Check for previous table entries created during * boot (__create_page_tables) and flush them. @@ -213,21 +226,23 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr, if (!pmd_none(old_pmd)) flush_tlb_all(); } else { - alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys)); + alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys), + prot_pte); } phys += next - addr; } while (pmd++, addr = next, addr != end); } static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, - unsigned long end, unsigned long phys) + unsigned long end, unsigned long phys, + int map_io) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; do { next = pud_addr_end(addr, end); - alloc_init_pmd(pud, addr, next, phys); + alloc_init_pmd(pud, addr, next, phys, map_io); phys += next - addr; } while (pud++, addr = next, addr != end); } @@ -236,30 +251,44 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, * Create the page directory entries and any necessary page tables for the * mapping specified by 'md'. */ -static void __init create_mapping(phys_addr_t phys, unsigned long virt, - phys_addr_t size) +static void __init __create_mapping(pgd_t *pgd, phys_addr_t phys, + unsigned long virt, phys_addr_t size, + int map_io) { unsigned long addr, length, end, next; - pgd_t *pgd; - - if (virt < VMALLOC_START) { - pr_warning("BUG: not creating mapping for 0x%016llx at 0x%016lx - outside kernel range\n", - phys, virt); - return; - } addr = virt & PAGE_MASK; length = PAGE_ALIGN(size + (virt & ~PAGE_MASK)); - pgd = pgd_offset_k(addr); end = addr + length; do { next = pgd_addr_end(addr, end); - alloc_init_pud(pgd, addr, next, phys); + alloc_init_pud(pgd, addr, next, phys, map_io); phys += next - addr; } while (pgd++, addr = next, addr != end); } +static void __init create_mapping(phys_addr_t phys, unsigned long virt, + phys_addr_t size) +{ + if (virt < VMALLOC_START) { + pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n", + &phys, virt); + return; + } + __create_mapping(pgd_offset_k(virt & PAGE_MASK), phys, virt, size, 0); +} + +void __init create_id_mapping(phys_addr_t addr, phys_addr_t size, int map_io) +{ + if ((addr >> PGDIR_SHIFT) >= ARRAY_SIZE(idmap_pg_dir)) { + pr_warn("BUG: not creating id mapping for %pa\n", &addr); + return; + } + __create_mapping(&idmap_pg_dir[pgd_index(addr)], + addr, addr, size, map_io); +} + static void __init map_mem(void) { struct memblock_region *reg; diff --git a/arch/arm64/xen/hypercall.S b/arch/arm64/xen/hypercall.S index 531342ec4bcf..8bbe9401f4f0 100644 --- a/arch/arm64/xen/hypercall.S +++ b/arch/arm64/xen/hypercall.S @@ -80,6 +80,7 @@ HYPERCALL2(memory_op); HYPERCALL2(physdev_op); HYPERCALL3(vcpu_op); HYPERCALL1(tmem_op); +HYPERCALL2(multicall); ENTRY(privcmd_call) mov x16, x0 diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 18db853386c8..4912f0aadaa1 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -117,7 +117,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_ISP116X_HCD=m diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h index 61407279208a..0780f3f2415b 100644 --- a/arch/avr32/include/asm/atomic.h +++ b/arch/avr32/include/asm/atomic.h @@ -183,9 +183,4 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v) #define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* __ASM_AVR32_ATOMIC_H */ diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h index ebe7ad3f490b..910d5374ce59 100644 --- a/arch/avr32/include/asm/bitops.h +++ b/arch/avr32/include/asm/bitops.h @@ -13,12 +13,7 @@ #endif #include <asm/byteorder.h> - -/* - * clear_bit() doesn't provide any barrier for the compiler - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +#include <asm/barrier.h> /* * set_bit - Atomically set a bit in memory @@ -67,7 +62,7 @@ static inline void set_bit(int nr, volatile void * addr) * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static inline void clear_bit(int nr, volatile void * addr) diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 2f2c6acf210c..1759fad54017 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -123,7 +123,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 91535c38e7f2..357729682c00 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -147,7 +147,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index af2738c7441b..2e73a5d33da8 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -141,7 +141,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index e716fdfd2cf2..f0a2ddf5de46 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -159,7 +159,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=y diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index f59c80ee78e3..05108b85ab12 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -95,7 +95,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y CONFIG_USB=m CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_BLACKLIST_HUB=y CONFIG_USB_MON=m diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index b9af4fa69984..9ff79df6825c 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -94,7 +94,6 @@ CONFIG_WATCHDOG=y CONFIG_BFIN_WDT=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_MUSB_HDRC=m diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 629516578760..5adf0da58499 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -73,7 +73,6 @@ CONFIG_SPI_BFIN5XX=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_MON=y CONFIG_USB_ISP1362_HCD=y diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h index 19283a16ac08..420006877998 100644 --- a/arch/blackfin/include/asm/barrier.h +++ b/arch/blackfin/include/asm/barrier.h @@ -27,6 +27,9 @@ #endif /* !CONFIG_SMP */ +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + #include <asm-generic/barrier.h> #endif /* _BLACKFIN_BARRIER_H */ diff --git a/arch/blackfin/include/asm/bfin_spi3.h b/arch/blackfin/include/asm/bfin_spi3.h deleted file mode 100644 index 0957e65a54be..000000000000 --- a/arch/blackfin/include/asm/bfin_spi3.h +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Analog Devices SPI3 controller driver - * - * Copyright (c) 2011 Analog Devices Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _SPI_CHANNEL_H_ -#define _SPI_CHANNEL_H_ - -#include <linux/types.h> - -/* SPI_CONTROL */ -#define SPI_CTL_EN 0x00000001 /* Enable */ -#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ -#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ -#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ -#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ -#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ -#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ -#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ -#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ -#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ -#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ -#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ -#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ -#define SPI_CTL_LSBF 0x00001000 /* LSB First */ -#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ -#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ -#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ -#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ -#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ -#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ -#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ -#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ -#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ -#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ -#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ -#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ -#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ -/* SPI_RX_CONTROL */ -#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ -#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ -#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ -#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ -#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ -#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ -#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ -#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ -#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ -#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ -#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ -#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ -#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ -#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ -#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ -#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ -#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ -#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ -#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ -#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ -/* SPI_TX_CONTROL */ -#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ -#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ -#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ -#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ -#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ -#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ -#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ -#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ -#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ -#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ -#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ -#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ -#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ -#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ -#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ -#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ -#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ -#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ -#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ -#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ -#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ -#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ -/* SPI_CLOCK */ -#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ -/* SPI_DELAY */ -#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ -#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ -#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ -/* SPI_SSEL */ -#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ -#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ -#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ -#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ -#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ -#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ -#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ -#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ -#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ -#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ -#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ -#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ -#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ -#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ -/* SPI_RWC */ -#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ -/* SPI_RWCR */ -#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ -/* SPI_TWC */ -#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ -/* SPI_TWCR */ -#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ -/* SPI_IMASK */ -#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKCL */ -#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_IMASKST */ -#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ -#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ -#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ -#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ -#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ -#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ -#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ -#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ -/* SPI_STATUS */ -#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ -#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ -#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ -#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ -#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ -#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ -#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ -#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ -#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ -#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ -#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ -#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ -#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ -#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ -#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ -#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ -#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ -#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ -#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ -#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ -#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ -#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ -#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ -/* SPI_ILAT */ -#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ -/* SPI_ILATCL */ -#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ -#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ -#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ -#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ -#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ -#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ -#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ -#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ -#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ - -/* - * bfin spi3 registers layout - */ -struct bfin_spi_regs { - u32 revid; - u32 control; - u32 rx_control; - u32 tx_control; - u32 clock; - u32 delay; - u32 ssel; - u32 rwc; - u32 rwcr; - u32 twc; - u32 twcr; - u32 reserved0; - u32 emask; - u32 emaskcl; - u32 emaskst; - u32 reserved1; - u32 status; - u32 elat; - u32 elatcl; - u32 reserved2; - u32 rfifo; - u32 reserved3; - u32 tfifo; -}; - -#define MAX_CTRL_CS 8 /* cs in spi controller */ - -/* device.platform_data for SSP controller devices */ -struct bfin_spi3_master { - u16 num_chipselect; - u16 pin_req[7]; -}; - -/* spi_board_info.controller_data for SPI slave devices, - * copied to spi_device.platform_data ... mostly for dma tuning - */ -struct bfin_spi3_chip { - u32 control; - u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 tx_dummy_val; /* tx value for rx only transfer */ - bool enable_dma; -}; - -#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h index 0ca40dd44724..b298b654a26f 100644 --- a/arch/blackfin/include/asm/bitops.h +++ b/arch/blackfin/include/asm/bitops.h @@ -27,21 +27,17 @@ #include <asm-generic/bitops/ext2-atomic.h> +#include <asm/barrier.h> + #ifndef CONFIG_SMP #include <linux/irqflags.h> - /* * clear_bit may not imply a memory barrier */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif #include <asm-generic/bitops/atomic.h> #include <asm-generic/bitops/non-atomic.h> #else -#include <asm/barrier.h> #include <asm/byteorder.h> /* swab32 */ #include <linux/linkage.h> @@ -101,12 +97,6 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return __raw_bit_test_toggle_asm(a, nr & 0x1f); } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #define test_bit __skip_test_bit #include <asm-generic/bitops/non-atomic.h> #undef test_bit diff --git a/arch/blackfin/include/asm/pci.h b/arch/blackfin/include/asm/pci.h index 74352c4597d9..c737909fba47 100644 --- a/arch/blackfin/include/asm/pci.h +++ b/arch/blackfin/include/asm/pci.h @@ -10,9 +10,4 @@ #define PCIBIOS_MIN_IO 0x00001000 #define PCIBIOS_MIN_MEM 0x10000000 -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #endif /* _ASM_BFIN_PCI_H */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index c35414bdf7bd..c8c8ff9eff61 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -12,7 +12,6 @@ #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_FADVISE64 #define __ARCH_WANT_SYS_GETPGRP diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c index 943f7e95ec15..1ba4600de69f 100644 --- a/arch/blackfin/mach-bf609/boards/ezkit.c +++ b/arch/blackfin/mach-bf609/boards/ezkit.c @@ -20,7 +20,7 @@ #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_data/pinctrl-adi2.h> -#include <asm/bfin_spi3.h> +#include <linux/spi/adi_spi3.h> #include <asm/dma.h> #include <asm/gpio.h> #include <asm/nand.h> @@ -767,13 +767,13 @@ static struct flash_platform_data bfin_spi_flash_data = { .type = "w25q32", }; -static struct bfin_spi3_chip spi_flash_chip_info = { +static struct adi_spi3_chip spi_flash_chip_info = { .enable_dma = true, /* use dma transfer with this chip*/ }; #endif #if IS_ENABLED(CONFIG_SPI_SPIDEV) -static struct bfin_spi3_chip spidev_chip_info = { +static struct adi_spi3_chip spidev_chip_info = { .enable_dma = true, }; #endif @@ -1736,7 +1736,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif }; -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { { @@ -1777,13 +1777,13 @@ static struct resource bfin_spi1_resource[] = { }; /* SPI controller data */ -static struct bfin_spi3_master bf60x_spi_master_info0 = { +static struct adi_spi3_master bf60x_spi_master_info0 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, }; static struct platform_device bf60x_spi_master0 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 0, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi0_resource), .resource = bfin_spi0_resource, @@ -1792,13 +1792,13 @@ static struct platform_device bf60x_spi_master0 = { }, }; -static struct bfin_spi3_master bf60x_spi_master_info1 = { +static struct adi_spi3_master bf60x_spi_master_info1 = { .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS, .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, }; static struct platform_device bf60x_spi_master1 = { - .name = "bfin-spi3", + .name = "adi-spi3", .id = 1, /* Bus number */ .num_resources = ARRAY_SIZE(bfin_spi1_resource), .resource = bfin_spi1_resource, @@ -1990,7 +1990,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sdh_device, #endif -#if IS_ENABLED(CONFIG_SPI_BFIN_V3) +#if IS_ENABLED(CONFIG_SPI_ADI_V3) &bf60x_spi_master0, &bf60x_spi_master1, #endif @@ -2051,8 +2051,8 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = { PIN_MAP_MUX_GROUP_DEFAULT("bfin_sir.1", "pinctrl-adi2.0", NULL, "uart1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-sdh.0", "pinctrl-adi2.0", NULL, "rsi0"), PIN_MAP_MUX_GROUP_DEFAULT("stmmaceth.0", "pinctrl-adi2.0", NULL, "eth0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), - PIN_MAP_MUX_GROUP_DEFAULT("bfin-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.0", "pinctrl-adi2.0", NULL, "spi0"), + PIN_MAP_MUX_GROUP_DEFAULT("adi-spi3.1", "pinctrl-adi2.0", NULL, "spi1"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.0", "pinctrl-adi2.0", NULL, "twi0"), PIN_MAP_MUX_GROUP_DEFAULT("i2c-bfin-twi.1", "pinctrl-adi2.0", NULL, "twi1"), PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"), diff --git a/arch/blackfin/mach-bf609/clock.c b/arch/blackfin/mach-bf609/clock.c index 56200f37cfc8..244fa4ab4c56 100644 --- a/arch/blackfin/mach-bf609/clock.c +++ b/arch/blackfin/mach-bf609/clock.c @@ -363,6 +363,12 @@ static struct clk ethclk = { .ops = &dummy_clk_ops, }; +static struct clk spiclk = { + .name = "spi", + .parent = &sclk1, + .ops = &dummy_clk_ops, +}; + static struct clk_lookup bf609_clks[] = { CLK(sys_clkin, NULL, "SYS_CLKIN"), CLK(pll_clk, NULL, "PLLCLK"), @@ -375,6 +381,7 @@ static struct clk_lookup bf609_clks[] = { CLK(dclk, NULL, "DCLK"), CLK(oclk, NULL, "OCLK"), CLK(ethclk, NULL, "stmmaceth"), + CLK(spiclk, NULL, "spi"), }; int __init clk_init(void) diff --git a/arch/c6x/include/asm/bitops.h b/arch/c6x/include/asm/bitops.h index 0bec7e5036a8..f0ab012401b6 100644 --- a/arch/c6x/include/asm/bitops.h +++ b/arch/c6x/include/asm/bitops.h @@ -14,14 +14,8 @@ #ifdef __KERNEL__ #include <linux/bitops.h> - #include <asm/byteorder.h> - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +#include <asm/barrier.h> /* * We are lucky, DSP is perfect for bitops: do it in 3 cycles diff --git a/arch/c6x/kernel/setup.c b/arch/c6x/kernel/setup.c index 731db4b9014d..757128868d43 100644 --- a/arch/c6x/kernel/setup.c +++ b/arch/c6x/kernel/setup.c @@ -265,8 +265,8 @@ int __init c6x_add_memory(phys_addr_t start, unsigned long size) */ notrace void __init machine_init(unsigned long dt_ptr) { - struct boot_param_header *dtb = __va(dt_ptr); - struct boot_param_header *fdt = (struct boot_param_header *)_fdt_start; + const void *dtb = __va(dt_ptr); + const void *fdt = _fdt_start; /* interrupts must be masked */ set_creg(IER, 2); diff --git a/arch/cris/include/asm/atomic.h b/arch/cris/include/asm/atomic.h index 1056a5dfe04f..aa429baebaf9 100644 --- a/arch/cris/include/asm/atomic.h +++ b/arch/cris/include/asm/atomic.h @@ -7,6 +7,8 @@ #include <linux/types.h> #include <asm/cmpxchg.h> #include <arch/atomic.h> +#include <arch/system.h> +#include <asm/barrier.h> /* * Atomic operations that C can't guarantee us. Useful for @@ -151,10 +153,4 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) return ret; } -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif diff --git a/arch/cris/include/asm/bitops.h b/arch/cris/include/asm/bitops.h index 053c17b36559..bd49a546f4f5 100644 --- a/arch/cris/include/asm/bitops.h +++ b/arch/cris/include/asm/bitops.h @@ -21,6 +21,7 @@ #include <arch/bitops.h> #include <linux/atomic.h> #include <linux/compiler.h> +#include <asm/barrier.h> /* * set_bit - Atomically set a bit in memory @@ -42,7 +43,7 @@ * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ @@ -84,12 +85,6 @@ static inline int test_and_set_bit(int nr, volatile unsigned long *addr) return retval; } -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - /** * test_and_clear_bit - Clear a bit and return its old value * @nr: Bit to clear diff --git a/arch/cris/include/asm/pci.h b/arch/cris/include/asm/pci.h index f666734926d5..cc2399c175e9 100644 --- a/arch/cris/include/asm/pci.h +++ b/arch/cris/include/asm/pci.h @@ -20,7 +20,6 @@ void pcibios_config_init(void); struct pci_bus * pcibios_scan_root(int bus); void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq); struct irq_routing_table *pcibios_get_irq_routing_table(void); int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index 5cc7d1991e48..0f40fed1ba25 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -15,7 +15,6 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h index b86329d0e316..f6c3a1690101 100644 --- a/arch/frv/include/asm/atomic.h +++ b/arch/frv/include/asm/atomic.h @@ -17,6 +17,7 @@ #include <linux/types.h> #include <asm/spr-regs.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #ifdef CONFIG_SMP #error not SMP safe @@ -29,12 +30,6 @@ * We do not have SMP systems, so we don't have to deal with that. */ -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #define ATOMIC_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v, i) (((v)->counter) = (i)) diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h index 57bf85db893f..96de220ef131 100644 --- a/arch/frv/include/asm/bitops.h +++ b/arch/frv/include/asm/bitops.h @@ -25,12 +25,6 @@ #include <asm-generic/bitops/ffz.h> -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS static inline unsigned long atomic_test_and_ANDNOT_mask(unsigned long mask, volatile unsigned long *v) diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h index ef03baf5d89d..2035a4d3f9b9 100644 --- a/arch/frv/include/asm/pci.h +++ b/arch/frv/include/asm/pci.h @@ -24,8 +24,6 @@ struct pci_dev; extern void pcibios_set_master(struct pci_dev *dev); -extern void pcibios_penalize_isa_irq(int irq); - #ifdef CONFIG_MMU extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); extern void consistent_free(void *vaddr); diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index 70ec7293dce7..17b5df8fc28a 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -13,7 +13,6 @@ /* #define __ARCH_WANT_SYS_GETHOSTNAME */ #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -/* #define __ARCH_WANT_SYS_SGETMASK */ /* #define __ARCH_WANT_SYS_SIGNAL */ #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c index c677b9d81d30..1c35c93f942b 100644 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -55,10 +55,6 @@ void __init pcibios_fixup_irqs(void) } } -void __init pcibios_penalize_isa_irq(int irq) -{ -} - void pcibios_enable_irq(struct pci_dev *dev) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); diff --git a/arch/hexagon/include/asm/atomic.h b/arch/hexagon/include/asm/atomic.h index 17dc63780c06..de916b11bff5 100644 --- a/arch/hexagon/include/asm/atomic.h +++ b/arch/hexagon/include/asm/atomic.h @@ -24,6 +24,7 @@ #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } @@ -176,9 +177,4 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) #define atomic_inc_return(v) (atomic_add_return(1, v)) #define atomic_dec_return(v) (atomic_sub_return(1, v)) -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h index 9b1e4afbab3c..5e4a59b3ec1b 100644 --- a/arch/hexagon/include/asm/bitops.h +++ b/arch/hexagon/include/asm/bitops.h @@ -25,12 +25,10 @@ #include <linux/compiler.h> #include <asm/byteorder.h> #include <asm/atomic.h> +#include <asm/barrier.h> #ifdef __KERNEL__ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - /* * The offset calculations for these are based on BITS_PER_LONG == 32 * (i.e. I get to shift by #5-2 (32 bits per long, 4 bytes per access), diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 12c3afee0f6f..2f3abcf8f6bc 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -32,6 +32,7 @@ config IA64 select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW + select GENERIC_IRQ_LEGACY select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_IOMAP diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index cf5993f05d4f..4c4ac163c600 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -75,7 +75,6 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_CS4281=m CONFIG_USB_HIDDEV=y CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_UHCI_HCD=m CONFIG_USB_ACM=m diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index b4efaf2bc13e..e8ed3ae70aae 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -143,7 +143,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig index f64980dd20c3..d663efd1e4db 100644 --- a/arch/ia64/configs/gensparse_defconfig +++ b/arch/ia64/configs/gensparse_defconfig @@ -126,7 +126,6 @@ CONFIG_SND_CS46XX=m CONFIG_SND_EMU10K1=m CONFIG_SND_FM801=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 0fed9ae5a42a..c8a3f40e77f6 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -102,7 +102,6 @@ CONFIG_DRM_RADEON=m CONFIG_DRM_MGA=m CONFIG_DRM_SIS=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=m CONFIG_USB_UHCI_HCD=y diff --git a/arch/ia64/include/asm/acenv.h b/arch/ia64/include/asm/acenv.h new file mode 100644 index 000000000000..3f9eaeec9873 --- /dev/null +++ b/arch/ia64/include/asm/acenv.h @@ -0,0 +1,56 @@ +/* + * IA64 specific ACPICA environments and implementation + * + * Copyright (C) 2014, Intel Corporation + * Author: Lv Zheng <lv.zheng@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_IA64_ACENV_H +#define _ASM_IA64_ACENV_H + +#include <asm/intrinsics.h> + +#define COMPILER_DEPENDENT_INT64 long +#define COMPILER_DEPENDENT_UINT64 unsigned long + +/* Asm macros */ + +#ifdef CONFIG_ACPI + +static inline int +ia64_acpi_acquire_global_lock(unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); + val = ia64_cmpxchg4_acq(lock, new, old); + } while (unlikely (val != old)); + return (new < 3) ? -1 : 0; +} + +static inline int +ia64_acpi_release_global_lock(unsigned int *lock) +{ + unsigned int old, new, val; + do { + old = *lock; + new = old & ~0x3; + val = ia64_cmpxchg4_acq(lock, new, old); + } while (unlikely (val != old)); + return old & 0x1; +} + +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock)) + +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock)) + +#endif + +#endif /* _ASM_IA64_ACENV_H */ diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index d651102a4d45..75dc59a793d6 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -34,57 +34,8 @@ #include <linux/numa.h> #include <asm/numa.h> -#define COMPILER_DEPENDENT_INT64 long -#define COMPILER_DEPENDENT_UINT64 unsigned long - -/* - * Calling conventions: - * - * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) - * ACPI_EXTERNAL_XFACE - External ACPI interfaces - * ACPI_INTERNAL_XFACE - Internal ACPI interfaces - * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces - */ -#define ACPI_SYSTEM_XFACE -#define ACPI_EXTERNAL_XFACE -#define ACPI_INTERNAL_XFACE -#define ACPI_INTERNAL_VAR_XFACE - -/* Asm macros */ - -#define ACPI_FLUSH_CPU_CACHE() - -static inline int -ia64_acpi_acquire_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1)); - val = ia64_cmpxchg4_acq(lock, new, old); - } while (unlikely (val != old)); - return (new < 3) ? -1 : 0; -} - -static inline int -ia64_acpi_release_global_lock (unsigned int *lock) -{ - unsigned int old, new, val; - do { - old = *lock; - new = old & ~0x3; - val = ia64_cmpxchg4_acq(lock, new, old); - } while (unlikely (val != old)); - return old & 0x1; -} - -#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock)) - -#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock)) - #ifdef CONFIG_ACPI +extern int acpi_lapic; #define acpi_disabled 0 /* ACPI always enabled on IA64 */ #define acpi_noirq 0 /* ACPI always enabled on IA64 */ #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ @@ -92,7 +43,6 @@ ia64_acpi_release_global_lock (unsigned int *lock) #endif #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } -static inline void pci_acpi_crs_quirks(void) { } #ifdef CONFIG_IA64_GENERIC const char *acpi_get_sysname (void); diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h index 6e6fe1839f5d..0f8bf48dadf3 100644 --- a/arch/ia64/include/asm/atomic.h +++ b/arch/ia64/include/asm/atomic.h @@ -15,6 +15,7 @@ #include <linux/types.h> #include <asm/intrinsics.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } @@ -208,10 +209,4 @@ atomic64_add_negative (__s64 i, atomic64_t *v) #define atomic64_inc(v) atomic64_add(1, (v)) #define atomic64_dec(v) atomic64_sub(1, (v)) -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* _ASM_IA64_ATOMIC_H */ diff --git a/arch/ia64/include/asm/barrier.h b/arch/ia64/include/asm/barrier.h index d0a69aa35e27..a48957c7b445 100644 --- a/arch/ia64/include/asm/barrier.h +++ b/arch/ia64/include/asm/barrier.h @@ -55,6 +55,9 @@ #endif +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + /* * IA64 GCC turns volatile stores into st.rel and volatile loads into ld.acq no * need for asm trickery! diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h index c27eccd33349..71e8145243ee 100644 --- a/arch/ia64/include/asm/bitops.h +++ b/arch/ia64/include/asm/bitops.h @@ -16,6 +16,7 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/intrinsics.h> +#include <asm/barrier.h> /** * set_bit - Atomically set a bit in memory @@ -65,12 +66,6 @@ __set_bit (int nr, volatile void *addr) *((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31)); } -/* - * clear_bit() has "acquire" semantics. - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() do { /* skip */; } while (0) - /** * clear_bit - Clears a bit in memory * @nr: Bit to clear @@ -78,7 +73,7 @@ __set_bit (int nr, volatile void *addr) * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static __inline__ void diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h index a681d02cb324..029bab36cd91 100644 --- a/arch/ia64/include/asm/hw_irq.h +++ b/arch/ia64/include/asm/hw_irq.h @@ -132,7 +132,6 @@ extern int reserve_irq_vector (int vector); extern void __setup_vector_irq(int cpu); extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect); extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action); -extern int check_irq_used (int irq); extern void destroy_and_reserve_irq (unsigned int irq); #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)) diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h index 91b920fd7d53..820667cbea7e 100644 --- a/arch/ia64/include/asm/irq.h +++ b/arch/ia64/include/asm/irq.h @@ -31,4 +31,7 @@ bool is_affinity_mask_valid(const struct cpumask *cpumask); #define is_affinity_mask_valid is_affinity_mask_valid +int create_irq(void); +void destroy_irq(unsigned int irq); + #endif /* _ASM_IA64_IRQ_H */ diff --git a/arch/ia64/include/asm/irq_remapping.h b/arch/ia64/include/asm/irq_remapping.h index a8687b1d8906..e3b3556e2e1b 100644 --- a/arch/ia64/include/asm/irq_remapping.h +++ b/arch/ia64/include/asm/irq_remapping.h @@ -1,4 +1,6 @@ #ifndef __IA64_INTR_REMAPPING_H #define __IA64_INTR_REMAPPING_H #define irq_remapping_enabled 0 +#define dmar_alloc_hwirq create_irq +#define dmar_free_hwirq destroy_irq #endif diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 7d41cc089822..52af5ed9f60b 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -50,12 +50,6 @@ struct pci_dev; extern unsigned long ia64_max_iommu_merge_mask; #define PCI_DMA_BUS_IS_PHYS (ia64_max_iommu_merge_mask == ~0UL) -static inline void -pcibios_penalize_isa_irq (int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #include <asm-generic/pci-dma-compat.h> #ifdef CONFIG_PCI diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index 5957cf61f898..5b17418b4223 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -107,6 +107,7 @@ struct thread_info { #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ #define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ #define TIF_RESTORE_RSE 21 /* user RBS is newer than kernel RBS */ +#define TIF_POLLING_NRFLAG 22 /* idle is polling for TIF_NEED_RESCHED */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) @@ -118,6 +119,7 @@ struct thread_info { #define _TIF_MCA_INIT (1 << TIF_MCA_INIT) #define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED) #define _TIF_RESTORE_RSE (1 << TIF_RESTORE_RSE) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) /* "work to do on user-return" bits */ #define TIF_ALLWORK_MASK (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\ @@ -125,7 +127,6 @@ struct thread_info { /* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */ #define TIF_WORK_MASK (TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)) -#define TS_POLLING 1 /* true if in idle loop and not sleeping */ #define TS_RESTORE_SIGMASK 2 /* restore signal mask in do_signal() */ #ifndef __ASSEMBLY__ diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index 5cb55a1e606b..6437ca21f61b 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -21,7 +21,8 @@ #define PENALTY_FOR_NODE_WITH_CPUS 255 /* - * Distance above which we begin to use zone reclaim + * Nodes within this distance are eligible for reclaim by zone_reclaim() when + * zone_reclaim_mode is enabled. */ #define RECLAIM_DISTANCE 15 @@ -46,30 +47,6 @@ void build_cpu_to_node_map(void); -#define SD_CPU_INIT (struct sched_domain) { \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 1, \ - .max_interval = 4, \ - .busy_factor = 64, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 2, \ - .busy_idx = 2, \ - .idle_idx = 1, \ - .newidle_idx = 0, \ - .wake_idx = 0, \ - .forkexec_idx = 0, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_FORK \ - | SD_WAKE_AFFINE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ -} - #endif /* CONFIG_NUMA */ #ifdef CONFIG_SMP diff --git a/arch/ia64/include/uapi/asm/cmpxchg.h b/arch/ia64/include/uapi/asm/cmpxchg.h index 4f37dbbb8640..f35109b1d907 100644 --- a/arch/ia64/include/uapi/asm/cmpxchg.h +++ b/arch/ia64/include/uapi/asm/cmpxchg.h @@ -118,6 +118,15 @@ extern long ia64_cmpxchg_called_with_bad_pointer(void); #define cmpxchg_rel(ptr, o, n) \ ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr))) +/* + * Worse still - early processor implementations actually just ignored + * the acquire/release and did a full fence all the time. Unfortunately + * this meant a lot of badly written code that used .acq when they really + * wanted .rel became legacy out in the wild - so when we made a cpu + * that strictly did the .acq or .rel ... all that code started breaking - so + * we had to back-pedal and keep the "legacy" behavior of a full fence :-( + */ + /* for compatibility with other platforms: */ #define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) #define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n)) diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 0d407b300762..615ef81def49 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -56,6 +56,7 @@ #define PREFIX "ACPI: " +int acpi_lapic; unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; @@ -676,6 +677,8 @@ int __init early_acpi_boot_init(void) if (ret < 1) printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); + else + acpi_lapic = 1; #ifdef CONFIG_SMP if (available_cpus == 0) { diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 19f107be734e..cd44a57c73be 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -735,7 +735,7 @@ iosapic_register_intr (unsigned int gsi, rte = find_rte(irq, gsi); if(iosapic_intr_info[irq].count == 0) { assign_irq_vector(irq); - dynamic_irq_init(irq); + irq_init_desc(irq); } else if (rte->refcnt != NO_REF_RTE) { rte->refcnt++; goto unlock_iosapic_lock; diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 0884f5ecbcc3..03ea78ed64a9 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -93,14 +93,6 @@ static int irq_status[NR_IRQS] = { [0 ... NR_IRQS -1] = IRQ_UNUSED }; -int check_irq_used(int irq) -{ - if (irq_status[irq] == IRQ_USED) - return 1; - - return -1; -} - static inline int find_unassigned_irq(void) { int irq; @@ -390,8 +382,7 @@ void destroy_and_reserve_irq(unsigned int irq) { unsigned long flags; - dynamic_irq_cleanup(irq); - + irq_init_desc(irq); spin_lock_irqsave(&vector_lock, flags); __clear_irq_vector(irq); irq_status[irq] = IRQ_RSVD; @@ -424,13 +415,13 @@ int create_irq(void) out: spin_unlock_irqrestore(&vector_lock, flags); if (irq >= 0) - dynamic_irq_init(irq); + irq_init_desc(irq); return irq; } void destroy_irq(unsigned int irq) { - dynamic_irq_cleanup(irq); + irq_init_desc(irq); clear_irq_vector(irq); } diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index 68232db98baa..76069c18ee42 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -114,11 +114,6 @@ int pud_huge(pud_t pud) return 0; } -int pmd_huge_support(void) -{ - return 0; -} - struct page * follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c index eee069a0b539..1fe9aa5068ea 100644 --- a/arch/ia64/pci/fixup.c +++ b/arch/ia64/pci/fixup.c @@ -49,9 +49,7 @@ static void pci_fixup_video(struct pci_dev *pdev) * type BRIDGE, or CARDBUS. Host to PCI controllers use * PCI header type NORMAL. */ - if (bridge - &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) - ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + if (bridge && (pci_is_bridge(bridge))) { pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &config); if (!(config & PCI_BRIDGE_CTL_VGA)) diff --git a/arch/m32r/include/asm/atomic.h b/arch/m32r/include/asm/atomic.h index 0d81697c326c..8ad0ed4182a5 100644 --- a/arch/m32r/include/asm/atomic.h +++ b/arch/m32r/include/asm/atomic.h @@ -13,6 +13,7 @@ #include <asm/assembler.h> #include <asm/cmpxchg.h> #include <asm/dcache_clear.h> +#include <asm/barrier.h> /* * Atomic operations that C can't guarantee us. Useful for @@ -308,10 +309,4 @@ static __inline__ void atomic_set_mask(unsigned long mask, atomic_t *addr) local_irq_restore(flags); } -/* Atomic operations are already serializing on m32r */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* _ASM_M32R_ATOMIC_H */ diff --git a/arch/m32r/include/asm/bitops.h b/arch/m32r/include/asm/bitops.h index d3dea9ac7d4e..86ba2b42a6cf 100644 --- a/arch/m32r/include/asm/bitops.h +++ b/arch/m32r/include/asm/bitops.h @@ -21,6 +21,7 @@ #include <asm/byteorder.h> #include <asm/dcache_clear.h> #include <asm/types.h> +#include <asm/barrier.h> /* * These have to be done with inline assembly: that way the bit-setting @@ -73,7 +74,7 @@ static __inline__ void set_bit(int nr, volatile void * addr) * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static __inline__ void clear_bit(int nr, volatile void * addr) @@ -103,9 +104,6 @@ static __inline__ void clear_bit(int nr, volatile void * addr) local_irq_restore(flags); } -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - /** * change_bit - Toggle a bit in memory * @nr: Bit to clear diff --git a/arch/m68k/Kconfig.debug b/arch/m68k/Kconfig.debug index 229682721240..64776d7ac199 100644 --- a/arch/m68k/Kconfig.debug +++ b/arch/m68k/Kconfig.debug @@ -12,12 +12,17 @@ config BOOTPARAM_STRING config EARLY_PRINTK bool "Early printk" - depends on MVME16x || MAC + depends on !(SUN3 || M68360 || M68000 || COLDFIRE) help Write kernel log output directly to a serial port. + Where implemented, output goes to the framebuffer as well. + PROM console functionality on Sun 3x is not affected by this option. + + Pass "earlyprintk" on the kernel command line to get a + boot console. This is useful for kernel debugging when your machine crashes very - early before the console code is initialized. + early, i.e. before the normal console driver is loaded. You should normally say N here, unless you want to debug such a crash. if !MMU diff --git a/arch/m68k/amiga/amisound.c b/arch/m68k/amiga/amisound.c index 2559eefc6aff..90a60d758f8b 100644 --- a/arch/m68k/amiga/amisound.c +++ b/arch/m68k/amiga/amisound.c @@ -51,7 +51,7 @@ void __init amiga_init_sound(void) snd_data = amiga_chip_alloc_res(sizeof(sine_data), &beep_res); if (!snd_data) { - printk (KERN_CRIT "amiga init_sound: failed to allocate chipmem\n"); + pr_crit("amiga init_sound: failed to allocate chipmem\n"); return; } memcpy (snd_data, sine_data, sizeof(sine_data)); diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index 9625b7132227..01693df7f2f6 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -183,7 +183,7 @@ int __init amiga_parse_bootinfo(const struct bi_record *record) dev->boardaddr = be32_to_cpu(cd->cd_BoardAddr); dev->boardsize = be32_to_cpu(cd->cd_BoardSize); } else - printk("amiga_parse_bootinfo: too many AutoConfig devices\n"); + pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n"); #endif /* CONFIG_ZORRO */ break; @@ -209,9 +209,9 @@ static void __init amiga_identify(void) memset(&amiga_hw_present, 0, sizeof(amiga_hw_present)); - printk("Amiga hardware found: "); + pr_info("Amiga hardware found: "); if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) { - printk("[%s] ", amiga_models[amiga_model-AMI_500]); + pr_cont("[%s] ", amiga_models[amiga_model-AMI_500]); strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]); } @@ -322,7 +322,7 @@ static void __init amiga_identify(void) #define AMIGAHW_ANNOUNCE(name, str) \ if (AMIGAHW_PRESENT(name)) \ - printk(str) + pr_cont(str) AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO "); AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER "); @@ -354,8 +354,8 @@ static void __init amiga_identify(void) AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK "); AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA "); if (AMIGAHW_PRESENT(ZORRO)) - printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : ""); - printk("\n"); + pr_cont("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : ""); + pr_cont("\n"); #undef AMIGAHW_ANNOUNCE } @@ -424,7 +424,7 @@ void __init config_amiga(void) if (m68k_memory[i].addr < 16*1024*1024) { if (i == 0) { /* don't cut off the branch we're sitting on */ - printk("Warning: kernel runs in Zorro II memory\n"); + pr_warn("Warning: kernel runs in Zorro II memory\n"); continue; } disabled_z2mem += m68k_memory[i].size; @@ -435,8 +435,8 @@ void __init config_amiga(void) } } if (disabled_z2mem) - printk("%dK of Zorro II memory will not be used as system memory\n", - disabled_z2mem>>10); + pr_info("%dK of Zorro II memory will not be used as system memory\n", + disabled_z2mem>>10); } /* request all RAM */ @@ -475,7 +475,7 @@ static void __init amiga_sched_init(irq_handler_t timer_routine) jiffy_ticks = DIV_ROUND_CLOSEST(amiga_eclock, HZ); if (request_resource(&mb_resources._ciab, &sched_res)) - printk("Cannot allocate ciab.ta{lo,hi}\n"); + pr_warn("Cannot allocate ciab.ta{lo,hi}\n"); ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */ ciab.talo = jiffy_ticks % 256; ciab.tahi = jiffy_ticks / 256; diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c index 9268c0f96376..6e62d66c396e 100644 --- a/arch/m68k/apollo/config.c +++ b/arch/m68k/apollo/config.c @@ -65,8 +65,8 @@ int __init apollo_parse_bootinfo(const struct bi_record *record) static void __init dn_setup_model(void) { - printk("Apollo hardware found: "); - printk("[%s]\n", apollo_models[apollo_model - APOLLO_DN3000]); + pr_info("Apollo hardware found: [%s]\n", + apollo_models[apollo_model - APOLLO_DN3000]); switch(apollo_model) { case APOLLO_UNKNOWN: @@ -197,8 +197,10 @@ void dn_sched_init(irq_handler_t timer_routine) *(volatile unsigned char *)(pica+1)&=(~8); #if 0 - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); - printk("*(0x10803) %02x\n",*(volatile unsigned char *)(apollo_timer + 0x3)); + pr_info("*(0x10803) %02x\n", + *(volatile unsigned char *)(apollo_timer + 0x3)); + pr_info("*(0x10803) %02x\n", + *(volatile unsigned char *)(apollo_timer + 0x3)); #endif if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine)) @@ -236,12 +238,10 @@ int dn_dummy_hwclk(int op, struct rtc_time *t) { } -int dn_dummy_set_clock_mmss(unsigned long nowtime) { - - printk("set_clock_mmss\n"); - - return 0; - +int dn_dummy_set_clock_mmss(unsigned long nowtime) +{ + pr_info("set_clock_mmss\n"); + return 0; } void dn_dummy_reset(void) { diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c index 0810c8d56e59..5f8cb5a234d9 100644 --- a/arch/m68k/atari/stram.c +++ b/arch/m68k/atari/stram.c @@ -47,6 +47,7 @@ static struct resource stram_pool = { static unsigned long pool_size = 1024*1024; +static unsigned long stram_virt_offset; static int __init atari_stram_setup(char *arg) { @@ -67,14 +68,12 @@ early_param("stram_pool", atari_stram_setup); void __init atari_stram_init(void) { int i; - void *stram_start; /* * determine whether kernel code resides in ST-RAM * (then ST-RAM is the first memory block at virtual 0x0) */ - stram_start = phys_to_virt(0); - kernel_in_stram = (stram_start == 0); + kernel_in_stram = (m68k_memory[0].addr == 0); for (i = 0; i < m68k_num_memory; ++i) { if (m68k_memory[i].addr == 0) { @@ -89,24 +88,62 @@ void __init atari_stram_init(void) /* * This function is called from setup_arch() to reserve the pages needed for - * ST-RAM management. + * ST-RAM management, if the kernel resides in ST-RAM. */ void __init atari_stram_reserve_pages(void *start_mem) { - /* - * always reserve first page of ST-RAM, the first 2 KiB are - * supervisor-only! - */ - if (!kernel_in_stram) - reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT); + if (kernel_in_stram) { + pr_debug("atari_stram pool: kernel in ST-RAM, using alloc_bootmem!\n"); + stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size); + stram_pool.end = stram_pool.start + pool_size - 1; + request_resource(&iomem_resource, &stram_pool); + stram_virt_offset = 0; + pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", + pool_size, &stram_pool); + pr_debug("atari_stram pool: stram_virt_offset = %lx\n", + stram_virt_offset); + } +} - stram_pool.start = (resource_size_t)alloc_bootmem_low_pages(pool_size); - stram_pool.end = stram_pool.start + pool_size - 1; - request_resource(&iomem_resource, &stram_pool); - pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", - pool_size, &stram_pool); +/* + * This function is called as arch initcall to reserve the pages needed for + * ST-RAM management, if the kernel does not reside in ST-RAM. + */ +int __init atari_stram_map_pages(void) +{ + if (!kernel_in_stram) { + /* + * Skip page 0, as the fhe first 2 KiB are supervisor-only! + */ + pr_debug("atari_stram pool: kernel not in ST-RAM, using ioremap!\n"); + stram_pool.start = PAGE_SIZE; + stram_pool.end = stram_pool.start + pool_size - 1; + request_resource(&iomem_resource, &stram_pool); + stram_virt_offset = (unsigned long) ioremap(stram_pool.start, + resource_size(&stram_pool)) - stram_pool.start; + pr_debug("atari_stram pool: size = %lu bytes, resource = %pR\n", + pool_size, &stram_pool); + pr_debug("atari_stram pool: stram_virt_offset = %lx\n", + stram_virt_offset); + } + return 0; +} +arch_initcall(atari_stram_map_pages); + + +void *atari_stram_to_virt(unsigned long phys) +{ + return (void *)(phys + stram_virt_offset); +} +EXPORT_SYMBOL(atari_stram_to_virt); + + +unsigned long atari_stram_to_phys(void *virt) +{ + return (unsigned long)(virt - stram_virt_offset); } +EXPORT_SYMBOL(atari_stram_to_phys); void *atari_stram_alloc(unsigned long size, const char *owner) @@ -134,14 +171,14 @@ void *atari_stram_alloc(unsigned long size, const char *owner) } pr_debug("atari_stram_alloc: returning %pR\n", res); - return (void *)res->start; + return atari_stram_to_virt(res->start); } EXPORT_SYMBOL(atari_stram_alloc); void atari_stram_free(void *addr) { - unsigned long start = (unsigned long)addr; + unsigned long start = atari_stram_to_phys(addr); struct resource *res; unsigned long size; diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 96da4963d14b..d7eac833a94f 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -159,6 +159,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -279,6 +281,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -305,7 +308,6 @@ CONFIG_VETH=m CONFIG_A2065=y CONFIG_ARIADNE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_HP is not set @@ -315,6 +317,7 @@ CONFIG_ARIADNE=y CONFIG_HYDRA=y CONFIG_APNE=y CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 1b8739f50cbf..650ee75de6cd 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -284,12 +287,12 @@ CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 6ea4e91f0caa..3142e69342fa 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -224,6 +225,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -269,6 +271,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -293,11 +296,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_ATARILANCE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index e5a12739ff2d..0daa8a172f30 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_BVME6000_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 8936d7fb0f0f..88af78f7bad9 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -157,6 +157,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -225,6 +226,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -261,6 +263,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -285,12 +288,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index be5342cca25b..66f915574a85 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -156,6 +156,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -227,6 +228,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -270,6 +272,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -301,7 +304,6 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MAC89x0=y # CONFIG_NET_VENDOR_INTEL is not set @@ -309,6 +311,7 @@ CONFIG_MAC89x0=y # CONFIG_NET_VENDOR_MICREL is not set CONFIG_MACSONIC=y CONFIG_MAC8390=y +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index f27194ade167..5eaa49924fa6 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -165,6 +165,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -236,6 +237,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -302,6 +304,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -340,7 +343,6 @@ CONFIG_MVME147_NET=y CONFIG_SUN3LANCE=y CONFIG_MACMACE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MAC89x0=y # CONFIG_NET_VENDOR_HP is not set @@ -354,6 +356,7 @@ CONFIG_MAC8390=y CONFIG_NE2000=m CONFIG_APNE=y CONFIG_ZORRO8390=y +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index c3887603c1db..324d0b4d8351 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -154,6 +154,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -222,6 +223,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -259,6 +261,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -283,12 +286,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_MVME147_NET=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index f7ff784d05ac..f0cb4338952e 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -260,6 +262,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -283,12 +286,12 @@ CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set CONFIG_MVME16x_NET=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index f0c72ab037be..d6cf0880c463 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -155,6 +155,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -223,6 +224,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -266,6 +268,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -291,7 +294,6 @@ CONFIG_VETH=m # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_AMD is not set # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_HP is not set @@ -299,6 +301,7 @@ CONFIG_VETH=m # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_NE2000=m +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SMSC is not set # CONFIG_NET_VENDOR_STMICRO is not set diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 7bca0f464521..f4e88d1c7472 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -281,11 +284,11 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_SUN3LANCE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set CONFIG_SUN3_82586=y # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 317f3e1fec95..49f4032c1ad6 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -152,6 +152,7 @@ CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m @@ -220,6 +221,7 @@ CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y +CONFIG_BATMAN_ADV_MCAST=y CONFIG_NETLINK_DIAG=m CONFIG_NET_MPLS_GSO=m # CONFIG_WIRELESS is not set @@ -257,6 +259,7 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m +CONFIG_DM_ERA=m CONFIG_DM_MIRROR=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m @@ -281,12 +284,12 @@ CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_VETH=m CONFIG_SUN3LANCE=y # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_VIA is not set diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c index 2e5a787ea11b..a9befe65adc4 100644 --- a/arch/m68k/hp300/config.c +++ b/arch/m68k/hp300/config.c @@ -87,7 +87,7 @@ int __init hp300_parse_bootinfo(const struct bi_record *record) /* serial port address: ignored here */ break; - default: + default: unknown = 1; } @@ -262,11 +262,12 @@ void __init config_hp300(void) #endif mach_max_dma_address = 0xffffffff; - if (hp300_model >= HP_330 && hp300_model <= HP_433S && hp300_model != HP_350) { - printk(KERN_INFO "Detected HP9000 model %s\n", hp300_models[hp300_model-HP_320]); + if (hp300_model >= HP_330 && hp300_model <= HP_433S && + hp300_model != HP_350) { + pr_info("Detected HP9000 model %s\n", + hp300_models[hp300_model-HP_320]); strcat(hp300_model_name, hp300_models[hp300_model-HP_320]); - } - else { + } else { panic("Unknown HP9000 Model"); } #ifdef CONFIG_SERIAL_8250_CONSOLE diff --git a/arch/m68k/include/asm/atari_stram.h b/arch/m68k/include/asm/atari_stram.h index 62e27598af91..4e771c22d6a9 100644 --- a/arch/m68k/include/asm/atari_stram.h +++ b/arch/m68k/include/asm/atari_stram.h @@ -8,6 +8,8 @@ /* public interface */ void *atari_stram_alloc(unsigned long size, const char *owner); void atari_stram_free(void *); +void *atari_stram_to_virt(unsigned long phys); +unsigned long atari_stram_to_phys(void *); /* functions called internally by other parts of the kernel */ void atari_stram_init(void); diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index f4e32de263a7..55695212a2ae 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -4,6 +4,7 @@ #include <linux/types.h> #include <linux/irqflags.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> /* * Atomic operations that C can't guarantee us. Useful for @@ -209,11 +210,4 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) return c; } - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* __ARCH_M68K_ATOMIC __ */ diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h index c6baa913592a..b4a9b0d5928d 100644 --- a/arch/m68k/include/asm/bitops.h +++ b/arch/m68k/include/asm/bitops.h @@ -13,6 +13,7 @@ #endif #include <linux/compiler.h> +#include <asm/barrier.h> /* * Bit access functions vary across the ColdFire and 68k families. @@ -67,12 +68,6 @@ static inline void bfset_mem_set_bit(int nr, volatile unsigned long *vaddr) #define __set_bit(nr, vaddr) set_bit(nr, vaddr) -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - static inline void bclr_reg_clear_bit(int nr, volatile unsigned long *vaddr) { char *p = (char *)vaddr + (nr ^ 31) / 8; diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h index e33f5bb6aca8..f186459072e9 100644 --- a/arch/m68k/include/asm/m525xsim.h +++ b/arch/m68k/include/asm/m525xsim.h @@ -105,7 +105,7 @@ /* * QSPI module. */ -#define MCFQSPI_BASE (MCF_MBAR + 0x300) /* Base address QSPI */ +#define MCFQSPI_BASE (MCF_MBAR + 0x400) /* Base address QSPI */ #define MCFQSPI_SIZE 0x40 /* Register set size */ #ifdef CONFIG_M5249 diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index d3bd83887429..a5fbd17ab0a5 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -55,9 +55,15 @@ /* * Generic GPIO support */ -#define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */ -#define MCFGPIO_IRQ_MAX -1 -#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_PODR (MCF_MBAR + 0xA00) +#define MCFGPIO_PDDR (MCF_MBAR + 0xA10) +#define MCFGPIO_PPDR (MCF_MBAR + 0xA20) +#define MCFGPIO_SETR (MCF_MBAR + 0xA20) +#define MCFGPIO_CLRR (MCF_MBAR + 0xA30) + +#define MCFGPIO_PIN_MAX 136 /* 128 gpio + 8 eport */ +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE /* * EDGE Port support. diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index c41ebf45f1d0..66203c334c6f 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -139,7 +139,8 @@ static inline void gpio_free(unsigned gpio) #if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M53xx) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) /* * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses * read-modify-write to change an output and a GPIO module which has separate @@ -195,7 +196,8 @@ static inline u32 __mcfgpio_ppdr(unsigned gpio) return MCFSIM2_GPIO1READ; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M53xx) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPPDR; @@ -237,7 +239,8 @@ static inline u32 __mcfgpio_podr(unsigned gpio) return MCFSIM2_GPIO1WRITE; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M53xx) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPDR; @@ -279,7 +282,8 @@ static inline u32 __mcfgpio_pddr(unsigned gpio) return MCFSIM2_GPIO1ENABLE; #elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ - defined(CONFIG_M53xx) || defined(CONFIG_M5441x) + defined(CONFIG_M53xx) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) #if !defined(CONFIG_M5441x) if (gpio < 8) return MCFEPORT_EPDDR; diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 33afa56ad47a..1fcdd344c7ad 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -13,7 +13,6 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 2d5d9be16273..e47778f8588d 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -25,3 +25,5 @@ obj-$(CONFIG_HAS_DMA) += dma.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_BOOTINFO_PROC) += bootinfo_proc.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + diff --git a/arch/m68k/kernel/early_printk.c b/arch/m68k/kernel/early_printk.c new file mode 100644 index 000000000000..ff9708d71921 --- /dev/null +++ b/arch/m68k/kernel/early_printk.c @@ -0,0 +1,67 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 2014 Finn Thain + */ + +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/init.h> +#include <linux/string.h> +#include <asm/setup.h> + +extern void mvme16x_cons_write(struct console *co, + const char *str, unsigned count); + +asmlinkage void __init debug_cons_nputs(const char *s, unsigned n); + +static void __ref debug_cons_write(struct console *c, + const char *s, unsigned n) +{ +#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \ + defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)) + if (MACH_IS_MVME16x) + mvme16x_cons_write(c, s, n); + else + debug_cons_nputs(s, n); +#endif +} + +static struct console early_console_instance = { + .name = "debug", + .write = debug_cons_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1 +}; + +static int __init setup_early_printk(char *buf) +{ + if (early_console || buf) + return 0; + + early_console = &early_console_instance; + register_console(early_console); + + return 0; +} +early_param("earlyprintk", setup_early_printk); + +/* + * debug_cons_nputs() defined in arch/m68k/kernel/head.S cannot be called + * after init sections are discarded (for platforms that use it). + */ +#if !(defined(CONFIG_SUN3) || defined(CONFIG_M68360) || \ + defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE)) + +static int __init unregister_early_console(void) +{ + if (!early_console || MACH_IS_MVME16x) + return 0; + + return unregister_console(early_console); +} +late_initcall(unregister_early_console); + +#endif diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index 3ab329b88521..dbb118e1a4e0 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -153,7 +153,7 @@ * ------------ * The console is also able to be turned off. The console in head.S * is specifically for debugging and can be very useful. It is surrounded by - * #ifdef CONSOLE/#endif clauses so it doesn't have to ship in known-good + * #ifdef / #endif clauses so it doesn't have to ship in known-good * kernels. It's basic algorithm is to determine the size of the screen * (in height/width and bit depth) and then use that information for * displaying an 8x8 font or an 8x16 (widthxheight). I prefer the 8x8 for @@ -198,9 +198,8 @@ * CONFIG_xxx: These are the obvious machine configuration defines created * during configuration. These are defined in autoconf.h. * - * CONSOLE: There is support for head.S console in this file. This - * console can talk to a Mac frame buffer, but could easily be extrapolated - * to extend it to support other platforms. + * CONSOLE_DEBUG: Only supports a Mac frame buffer but could easily be + * extended to support other platforms. * * TEST_MMU: This is a test harness for running on any given machine but * getting an MMU dump for another class of machine. The classes of machines @@ -222,7 +221,7 @@ * MMU_PRINT: There is a routine built into head.S that can display the * MMU data structures. It outputs its result through the serial_putc * interface. So where ever that winds up driving data, that's where the - * mmu struct will appear. On the Macintosh that's typically the console. + * mmu struct will appear. * * SERIAL_DEBUG: There are a series of putc() macro statements * scattered through out the code to give progress of status to the @@ -250,8 +249,8 @@ * USE_MFP: Use the ST-MFP port (Modem1) for serial debug. * * Macintosh constants: - * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug and early console. - * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug and early console. + * MAC_USE_SCC_A: Use SCC port A (modem) for serial debug. + * MAC_USE_SCC_B: Use SCC port B (printer) for serial debug. */ #include <linux/linkage.h> @@ -268,27 +267,17 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/asm-offsets.h> - #ifdef CONFIG_MAC - -#include <asm/machw.h> - -#ifdef CONFIG_FRAMEBUFFER_CONSOLE -#define CONSOLE +# include <asm/machw.h> #endif #ifdef CONFIG_EARLY_PRINTK -#define SERIAL_DEBUG -#else -#undef SERIAL_DEBUG +# define SERIAL_DEBUG +# if defined(CONFIG_MAC) && defined(CONFIG_FONT_SUPPORT) +# define CONSOLE_DEBUG +# endif #endif -#else /* !CONFIG_MAC */ - -#define SERIAL_DEBUG - -#endif /* !CONFIG_MAC */ - #undef MMU_PRINT #undef MMU_NOCACHE_KERNEL #undef DEBUG @@ -303,6 +292,7 @@ .globl kernel_pg_dir .globl availmem +.globl m68k_init_mapped_size .globl m68k_pgtable_cachemode .globl m68k_supervisor_cachemode #ifdef CONFIG_MVME16x @@ -480,22 +470,21 @@ func_define serial_putc,1 func_define console_putc,1 func_define console_init -func_define console_put_stats func_define console_put_penguin func_define console_plot_pixel,3 func_define console_scroll .macro putc ch -#if defined(CONSOLE) || defined(SERIAL_DEBUG) +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) pea \ch #endif -#ifdef CONSOLE +#ifdef CONSOLE_DEBUG func_call console_putc #endif #ifdef SERIAL_DEBUG func_call serial_putc #endif -#if defined(CONSOLE) || defined(SERIAL_DEBUG) +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) addql #4,%sp #endif .endm @@ -515,7 +504,7 @@ func_define putn,1 .endm .macro puts string -#if defined(CONSOLE) || defined(SERIAL_DEBUG) +#if defined(CONSOLE_DEBUG) || defined(SERIAL_DEBUG) __INITDATA .Lstr\@: .string "\string" @@ -651,11 +640,9 @@ ENTRY(__start) lea %pc@(L(mac_rowbytes)),%a1 movel %a0@,%a1@ -#ifdef SERIAL_DEBUG get_bi_record BI_MAC_SCCBASE lea %pc@(L(mac_sccbase)),%a1 movel %a0@,%a1@ -#endif L(test_notmac): #endif /* CONFIG_MAC */ @@ -885,13 +872,12 @@ L(nothp): */ #ifdef CONFIG_MAC is_not_mac(L(nocon)) -# ifdef CONSOLE +# ifdef CONSOLE_DEBUG console_init # ifdef CONFIG_LOGO console_put_penguin # endif /* CONFIG_LOGO */ - console_put_stats -# endif /* CONSOLE */ +# endif /* CONSOLE_DEBUG */ L(nocon): #endif /* CONFIG_MAC */ @@ -922,10 +908,21 @@ L(nocon): * * This block of code does what's necessary to map in the various kinds * of machines for execution of Linux. - * First map the first 4 MB of kernel code & data + * First map the first 4, 8, or 16 MB of kernel code & data */ - mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),#4*1024*1024,\ + get_bi_record BI_MEMCHUNK + movel %a0@(4),%d0 + movel #16*1024*1024,%d1 + cmpl %d0,%d1 + jls 1f + lsrl #1,%d1 + cmpl %d0,%d1 + jls 1f + lsrl #1,%d1 +1: + movel %d1,m68k_init_mapped_size + mmu_map #PAGE_OFFSET,%pc@(L(phys_kernel_start)),%d1,\ %pc@(m68k_supervisor_cachemode) putc 'C' @@ -1396,15 +1393,13 @@ L(mmu_fixup_done): andl L(mac_videobase),%d0 addl #VIDEOMEMBASE,%d0 movel %d0,L(mac_videobase) -#if defined(CONSOLE) +#ifdef CONSOLE_DEBUG movel %pc@(L(phys_kernel_start)),%d0 subl #PAGE_OFFSET,%d0 subl %d0,L(console_font) subl %d0,L(console_font_data) #endif -#ifdef SERIAL_DEBUG orl #0x50000000,L(mac_sccbase) -#endif 1: #endif @@ -2734,7 +2729,12 @@ func_return get_new_page */ #ifdef CONFIG_MAC +/* You may define either or both of these. */ +#define MAC_USE_SCC_A /* Modem port */ +#define MAC_USE_SCC_B /* Printer port */ +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) +/* Initialisation table for SCC with 3.6864 MHz PCLK */ L(scc_initable_mac): .byte 4,0x44 /* x16, 1 stopbit, no parity */ .byte 3,0xc0 /* receiver: 8 bpc */ @@ -2748,6 +2748,7 @@ L(scc_initable_mac): .byte -1 .even #endif +#endif /* CONFIG_MAC */ #ifdef CONFIG_ATARI /* #define USE_PRINTER */ @@ -2756,14 +2757,12 @@ L(scc_initable_mac): #define USE_MFP #if defined(USE_SCC_A) || defined(USE_SCC_B) -#define USE_SCC -/* Initialisation table for SCC */ -L(scc_initable): - .byte 9,12 /* Reset */ +/* Initialisation table for SCC with 7.9872 MHz PCLK */ +/* PCLK == 8.0539 gives baud == 9680.1 */ +L(scc_initable_atari): .byte 4,0x44 /* x16, 1 stopbit, no parity */ .byte 3,0xc0 /* receiver: 8 bpc */ .byte 5,0xe2 /* transmitter: 8 bpc, assert dtr/rts */ - .byte 9,0 /* no interrupts */ .byte 10,0 /* NRZ */ .byte 11,0x50 /* use baud rate generator */ .byte 12,24,13,0 /* 9600 baud */ @@ -2812,7 +2811,7 @@ LMFP_UDR = 0xfffa2f */ /* - * Initialize serial port hardware for 9600/8/1 + * Initialize serial port hardware */ func_start serial_init,%d0/%d1/%a0/%a1 /* @@ -2822,7 +2821,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 * d0 = boot info offset * CONFIG_ATARI * a0 = address of SCC - * a1 = Liobase address/address of scc_initable + * a1 = Liobase address/address of scc_initable_atari * d0 = init data for serial port * CONFIG_MAC * a0 = address of SCC @@ -2843,6 +2842,7 @@ func_start serial_init,%d0/%d1/%a0/%a1 | movew #61,CUSTOMBASE+C_SERPER-ZTWOBASE 1: #endif + #ifdef CONFIG_ATARI is_not_atari(4f) movel %pc@(L(iobase)),%a1 @@ -2857,9 +2857,21 @@ func_start serial_init,%d0/%d1/%a0/%a1 moveb %a1@(LPSG_READ),%d0 bset #5,%d0 moveb %d0,%a1@(LPSG_WRITE) -#elif defined(USE_SCC) +#elif defined(USE_SCC_A) || defined(USE_SCC_B) lea %a1@(LSCC_CTRL),%a0 - lea %pc@(L(scc_initable)),%a1 + /* Reset SCC register pointer */ + moveb %a0@,%d0 + /* Reset SCC device: write register pointer then register value */ + moveb #9,%a0@ + moveb #0xc0,%a0@ + /* Wait for 5 PCLK cycles, which is about 63 CPU cycles */ + /* 5 / 7.9872 MHz = approx. 0.63 us = 63 / 100 MHz */ + movel #32,%d0 +2: + subq #1,%d0 + jne 2b + /* Initialize channel */ + lea %pc@(L(scc_initable_atari)),%a1 2: moveb %a1@+,%d0 jmi 3f moveb %d0,%a0@ @@ -2877,21 +2889,14 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra L(serial_init_done) 4: #endif + #ifdef CONFIG_MAC is_not_mac(L(serial_init_not_mac)) - -#ifdef SERIAL_DEBUG - -/* You may define either or both of these. */ -#define MAC_USE_SCC_A /* Modem port */ -#define MAC_USE_SCC_B /* Printer port */ - +#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) #define mac_scc_cha_b_ctrl_offset 0x0 #define mac_scc_cha_a_ctrl_offset 0x2 #define mac_scc_cha_b_data_offset 0x4 #define mac_scc_cha_a_data_offset 0x6 - -#if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) movel %pc@(L(mac_sccbase)),%a0 /* Reset SCC register pointer */ moveb %a0@(mac_scc_cha_a_ctrl_offset),%d0 @@ -2905,7 +2910,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 subq #1,%d0 jne 5b #endif - #ifdef MAC_USE_SCC_A /* Initialize channel A */ lea %pc@(L(scc_initable_mac)),%a1 @@ -2916,7 +2920,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 5b 6: #endif /* MAC_USE_SCC_A */ - #ifdef MAC_USE_SCC_B /* Initialize channel B */ lea %pc@(L(scc_initable_mac)),%a1 @@ -2927,9 +2930,6 @@ func_start serial_init,%d0/%d1/%a0/%a1 jra 7b 8: #endif /* MAC_USE_SCC_B */ - -#endif /* SERIAL_DEBUG */ - jra L(serial_init_done) L(serial_init_not_mac): #endif /* CONFIG_MAC */ @@ -2959,6 +2959,15 @@ L(serial_init_not_mac): 2: #endif +#ifdef CONFIG_MVME16x + is_not_mvme16x(L(serial_init_not_mvme16x)) + moveb #0x10,M167_PCSCCMICR + moveb #0x10,M167_PCSCCTICR + moveb #0x10,M167_PCSCCRICR + jra L(serial_init_done) +L(serial_init_not_mvme16x): +#endif + #ifdef CONFIG_APOLLO /* We count on the PROM initializing SIO1 */ #endif @@ -2998,27 +3007,19 @@ func_start serial_putc,%d0/%d1/%a0/%a1 #ifdef CONFIG_MAC is_not_mac(5f) - -#ifdef SERIAL_DEBUG - #if defined(MAC_USE_SCC_A) || defined(MAC_USE_SCC_B) movel %pc@(L(mac_sccbase)),%a1 #endif - #ifdef MAC_USE_SCC_A 3: btst #2,%a1@(mac_scc_cha_a_ctrl_offset) jeq 3b moveb %d0,%a1@(mac_scc_cha_a_data_offset) #endif /* MAC_USE_SCC_A */ - #ifdef MAC_USE_SCC_B 4: btst #2,%a1@(mac_scc_cha_b_ctrl_offset) jeq 4b moveb %d0,%a1@(mac_scc_cha_b_data_offset) #endif /* MAC_USE_SCC_B */ - -#endif /* SERIAL_DEBUG */ - jra L(serial_putc_done) 5: #endif /* CONFIG_MAC */ @@ -3039,7 +3040,7 @@ func_start serial_putc,%d0/%d1/%a0/%a1 nop bset #5,%d0 moveb %d0,%a1@(LPSG_WRITE) -#elif defined(USE_SCC) +#elif defined(USE_SCC_A) || defined(USE_SCC_B) 3: btst #2,%a1@(LSCC_CTRL) jeq 3b moveb %d0,%a1@(LSCC_DATA) @@ -3195,7 +3196,7 @@ func_start puts,%d0/%a0 movel ARG1,%a0 jra 2f 1: -#ifdef CONSOLE +#ifdef CONSOLE_DEBUG console_putc %d0 #endif #ifdef SERIAL_DEBUG @@ -3224,7 +3225,7 @@ func_start putn,%d0-%d2 jls 2f addb #'A'-('9'+1),%d2 2: -#ifdef CONSOLE +#ifdef CONSOLE_DEBUG console_putc %d2 #endif #ifdef SERIAL_DEBUG @@ -3234,21 +3235,19 @@ func_start putn,%d0-%d2 func_return putn -#ifdef CONFIG_MAC +#ifdef CONFIG_EARLY_PRINTK /* - * mac_early_print - * * This routine takes its parameters on the stack. It then * turns around and calls the internal routines. This routine * is used by the boot console. * * The calling parameters are: - * void mac_early_print(const char *str, unsigned length); + * void debug_cons_nputs(const char *str, unsigned length) * * This routine does NOT understand variable arguments only * simple strings! */ -ENTRY(mac_early_print) +ENTRY(debug_cons_nputs) moveml %d0/%d1/%a0,%sp@- movew %sr,%sp@- ori #0x0700,%sr @@ -3256,7 +3255,7 @@ ENTRY(mac_early_print) movel %sp@(22),%d1 /* fetch parameter */ jra 2f 1: -#ifdef CONSOLE +#ifdef CONSOLE_DEBUG console_putc %d0 #endif #ifdef SERIAL_DEBUG @@ -3270,7 +3269,7 @@ ENTRY(mac_early_print) movew %sp@+,%sr moveml %sp@+,%d0/%d1/%a0 rts -#endif /* CONFIG_MAC */ +#endif /* CONFIG_EARLY_PRINTK */ #if defined(CONFIG_HP300) || defined(CONFIG_APOLLO) func_start set_leds,%d0/%a0 @@ -3292,7 +3291,7 @@ func_start set_leds,%d0/%a0 func_return set_leds #endif -#ifdef CONSOLE +#ifdef CONSOLE_DEBUG /* * For continuity, see the data alignment * to which this structure is tied. @@ -3396,43 +3395,6 @@ L(console_clear_loop): 1: func_return console_init -func_start console_put_stats,%a0/%d7 - /* - * Some of the register usage that follows - * a0 = pointer to boot_info - * d7 = value of boot_info fields - */ - puts "\nMacLinux\n" - -#ifdef SERIAL_DEBUG - puts "\n vidaddr:" - putn %pc@(L(mac_videobase)) /* video addr. */ - - puts "\n _stext:" - lea %pc@(_stext),%a0 - putn %a0 - - puts "\nbootinfo:" - lea %pc@(_end),%a0 - putn %a0 - - puts "\n cpuid:" - putn %pc@(L(cputype)) - -# ifdef CONFIG_MAC - puts "\n sccbase:" - putn %pc@(L(mac_sccbase)) -# endif -# ifdef MMU_PRINT - putc '\n' - jbsr mmu_print_machine_cpu_types -# endif -#endif /* SERIAL_DEBUG */ - - putc '\n' - -func_return console_put_stats - #ifdef CONFIG_LOGO func_start console_put_penguin,%a0-%a1/%d0-%d7 /* @@ -3774,12 +3736,15 @@ L(white_16): L(console_plot_pixel_exit): func_return console_plot_pixel -#endif /* CONSOLE */ +#endif /* CONSOLE_DEBUG */ __INITDATA .align 4 +m68k_init_mapped_size: + .long 0 + #if defined(CONFIG_ATARI) || defined(CONFIG_AMIGA) || \ defined(CONFIG_HP300) || defined(CONFIG_APOLLO) L(custom): @@ -3787,7 +3752,7 @@ L(iobase): .long 0 #endif -#if defined(CONSOLE) +#ifdef CONSOLE_DEBUG L(console_globals): .long 0 /* cursor column */ .long 0 /* cursor row */ @@ -3798,7 +3763,7 @@ L(console_font): .long 0 /* pointer to console font (struct font_desc) */ L(console_font_data): .long 0 /* pointer to console font data */ -#endif /* CONSOLE */ +#endif /* CONSOLE_DEBUG */ #if defined(MMU_PRINT) L(mmu_print_data): @@ -3838,7 +3803,9 @@ M167_CYIER = 0xfff45011 M167_CYLICR = 0xfff45026 M167_CYTEOIR = 0xfff45085 M167_CYTDR = 0xfff450f8 +M167_PCSCCMICR = 0xfff4201d M167_PCSCCTICR = 0xfff4201e +M167_PCSCCRICR = 0xfff4201f M167_PCTPIACKR = 0xfff42025 #endif @@ -3856,10 +3823,8 @@ L(mac_dimensions): .long 0 L(mac_rowbytes): .long 0 -#ifdef SERIAL_DEBUG L(mac_sccbase): .long 0 -#endif #endif /* CONFIG_MAC */ #if defined (CONFIG_APOLLO) diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 5b16f5d61b44..88c27d94a721 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -58,17 +58,16 @@ void (*mach_halt)(void); void (*mach_power_off)(void); #ifdef CONFIG_M68000 -#define CPU_NAME "MC68000" -#endif -#ifdef CONFIG_M68328 +#if defined(CONFIG_M68328) #define CPU_NAME "MC68328" -#endif -#ifdef CONFIG_M68EZ328 +#elif defined(CONFIG_M68EZ328) #define CPU_NAME "MC68EZ328" -#endif -#ifdef CONFIG_M68VZ328 +#elif defined(CONFIG_M68VZ328) #define CPU_NAME "MC68VZ328" +#else +#define CPU_NAME "MC68000" #endif +#endif /* CONFIG_M68000 */ #ifdef CONFIG_M68360 #define CPU_NAME "MC68360" #endif diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c index 982c3fe73c4a..a471eab1a4dd 100644 --- a/arch/m68k/mac/config.c +++ b/arch/m68k/mac/config.c @@ -71,31 +71,6 @@ static void mac_get_model(char *str); static void mac_identify(void); static void mac_report_hardware(void); -#ifdef CONFIG_EARLY_PRINTK -asmlinkage void __init mac_early_print(const char *s, unsigned n); - -static void __init mac_early_cons_write(struct console *con, - const char *s, unsigned n) -{ - mac_early_print(s, n); -} - -static struct console __initdata mac_early_cons = { - .name = "early", - .write = mac_early_cons_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1 -}; - -int __init mac_unregister_early_cons(void) -{ - /* mac_early_print can't be used after init sections are discarded */ - return unregister_console(&mac_early_cons); -} - -late_initcall(mac_unregister_early_cons); -#endif - static void __init mac_sched_init(irq_handler_t vector) { via_init_clock(vector); @@ -190,10 +165,6 @@ void __init config_mac(void) mach_beep = mac_mksound; #endif -#ifdef CONFIG_EARLY_PRINTK - register_console(&mac_early_cons); -#endif - /* * Determine hardware present */ diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c index 7d4024432163..b958916e5eac 100644 --- a/arch/m68k/mm/motorola.c +++ b/arch/m68k/mm/motorola.c @@ -45,7 +45,7 @@ EXPORT_SYMBOL(mm_cachebits); #endif /* size of memory already mapped in head.S */ -#define INIT_MAPPED_SIZE (4UL<<20) +extern __initdata unsigned long m68k_init_mapped_size; extern unsigned long availmem; @@ -271,10 +271,12 @@ void __init paging_init(void) */ addr = m68k_memory[0].addr; size = m68k_memory[0].size; - free_bootmem_node(NODE_DATA(0), availmem, min(INIT_MAPPED_SIZE, size) - (availmem - addr)); + free_bootmem_node(NODE_DATA(0), availmem, + min(m68k_init_mapped_size, size) - (availmem - addr)); map_node(0); - if (size > INIT_MAPPED_SIZE) - free_bootmem_node(NODE_DATA(0), addr + INIT_MAPPED_SIZE, size - INIT_MAPPED_SIZE); + if (size > m68k_init_mapped_size) + free_bootmem_node(NODE_DATA(0), addr + m68k_init_mapped_size, + size - m68k_init_mapped_size); for (i = 1; i < m68k_num_memory; i++) map_node(i); diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c index eab7d342757e..a53803cc66cd 100644 --- a/arch/m68k/mvme16x/config.c +++ b/arch/m68k/mvme16x/config.c @@ -213,7 +213,7 @@ static void __init mvme16x_init_IRQ (void) #define CySCRH (0x22) #define CyTFTC (0x80) -static void cons_write(struct console *co, const char *str, unsigned count) +void mvme16x_cons_write(struct console *co, const char *str, unsigned count) { volatile unsigned char *base_addr = (u_char *)CD2401_ADDR; volatile u_char sink; @@ -268,20 +268,6 @@ static void cons_write(struct console *co, const char *str, unsigned count) base_addr[CyIER] = ier; } -static struct console cons_info = -{ - .name = "sercon", - .write = cons_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static void __init mvme16x_early_console(void) -{ - register_console(&cons_info); - - printk(KERN_INFO "MVME16x: early console registered\n"); -} #endif void __init config_mvme16x(void) @@ -336,16 +322,6 @@ void __init config_mvme16x(void) else { mvme16x_config = MVME16x_CONFIG_GOT_LP | MVME16x_CONFIG_GOT_CD2401; - - /* Dont allow any interrupts from the CD2401 until the interrupt */ - /* handlers are installed */ - - pcc2chip[PccSCCMICR] = 0x10; - pcc2chip[PccSCCTICR] = 0x10; - pcc2chip[PccSCCRICR] = 0x10; -#ifdef CONFIG_EARLY_PRINTK - mvme16x_early_console(); -#endif } } diff --git a/arch/m68k/platform/68000/m68EZ328.c b/arch/m68k/platform/68000/m68EZ328.c index 332b5e8605fc..21952906e9e2 100644 --- a/arch/m68k/platform/68000/m68EZ328.c +++ b/arch/m68k/platform/68000/m68EZ328.c @@ -69,7 +69,8 @@ void __init config_BSP(char *command, int len) if (p) strcpy(p,command); else command[0] = 0; #endif - + + mach_sched_init = hw_timer_init; mach_hwclk = m68328_hwclk; mach_reset = m68ez328_reset; } diff --git a/arch/m68k/platform/68000/m68VZ328.c b/arch/m68k/platform/68000/m68VZ328.c index fd6658358af1..0e5e5a10a021 100644 --- a/arch/m68k/platform/68000/m68VZ328.c +++ b/arch/m68k/platform/68000/m68VZ328.c @@ -182,6 +182,7 @@ void __init config_BSP(char *command, int size) init_hardware(command, size); + mach_sched_init = hw_timer_init; mach_hwclk = m68328_hwclk; mach_reset = m68vz328_reset; } diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c index 9cd2b5c70519..e7e428681ec5 100644 --- a/arch/m68k/platform/coldfire/gpio.c +++ b/arch/m68k/platform/coldfire/gpio.c @@ -76,10 +76,7 @@ int __mcfgpio_direction_output(unsigned gpio, int value) local_irq_save(flags); data = mcfgpio_read(__mcfgpio_pddr(gpio)); - if (value) - data |= mcfgpio_bit(gpio); - else - data &= mcfgpio_bit(gpio); + data |= mcfgpio_bit(gpio); mcfgpio_write(data, __mcfgpio_pddr(gpio)); /* now set the data to output */ @@ -117,37 +114,51 @@ EXPORT_SYMBOL(__mcfgpio_free); #ifdef CONFIG_GPIOLIB -int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset) +static int mcfgpio_direction_input(struct gpio_chip *chip, unsigned offset) { return __mcfgpio_direction_input(offset); } -int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset) +static int mcfgpio_get_value(struct gpio_chip *chip, unsigned offset) { return __mcfgpio_get_value(offset); } -int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) +static int mcfgpio_direction_output(struct gpio_chip *chip, unsigned offset, + int value) { return __mcfgpio_direction_output(offset, value); } -void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset, int value) +static void mcfgpio_set_value(struct gpio_chip *chip, unsigned offset, + int value) { __mcfgpio_set_value(offset, value); } -int mcfgpio_request(struct gpio_chip *chip, unsigned offset) +static int mcfgpio_request(struct gpio_chip *chip, unsigned offset) { return __mcfgpio_request(offset); } -void mcfgpio_free(struct gpio_chip *chip, unsigned offset) +static void mcfgpio_free(struct gpio_chip *chip, unsigned offset) { __mcfgpio_free(offset); } -struct bus_type mcfgpio_subsys = { +static int mcfgpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ +#if defined(MCFGPIO_IRQ_MIN) + if ((offset >= MCFGPIO_IRQ_MIN) && (offset < MCFGPIO_IRQ_MAX)) +#else + if (offset < MCFGPIO_IRQ_MAX) +#endif + return MCFGPIO_IRQ_VECBASE + offset; + else + return -EINVAL; +} + +static struct bus_type mcfgpio_subsys = { .name = "gpio", .dev_name = "gpio", }; @@ -160,6 +171,7 @@ static struct gpio_chip mcfgpio_chip = { .direction_output = mcfgpio_direction_output, .get = mcfgpio_get_value, .set = mcfgpio_set_value, + .to_irq = mcfgpio_to_irq, .base = 0, .ngpio = MCFGPIO_PIN_MAX, }; diff --git a/arch/m68k/platform/coldfire/m520x.c b/arch/m68k/platform/coldfire/m520x.c index ea1be0e98ad6..4040a3c93733 100644 --- a/arch/m68k/platform/coldfire/m520x.c +++ b/arch/m68k/platform/coldfire/m520x.c @@ -118,10 +118,9 @@ static void __init m520x_clk_init(void) /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m520x_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) u16 par; /* setup Port QS for QSPI with gpio CS control */ writeb(0x3f, MCF_GPIO_PAR_QSPI); @@ -129,9 +128,8 @@ static void __init m520x_qspi_init(void) par = readw(MCF_GPIO_PAR_UART); par &= 0x00ff; writew(par, MCF_GPIO_PAR_UART); -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -176,9 +174,7 @@ void __init config_BSP(char *commandp, int size) m520x_clk_init(); m520x_uarts_init(); m520x_fec_init(); -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m520x_qspi_init(); -#endif } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m523x.c b/arch/m68k/platform/coldfire/m523x.c index 2b10e9f198cd..6b7135e6d5b4 100644 --- a/arch/m68k/platform/coldfire/m523x.c +++ b/arch/m68k/platform/coldfire/m523x.c @@ -32,6 +32,7 @@ DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); struct clk *mcf_clks[] = { @@ -44,16 +45,16 @@ struct clk *mcf_clks[] = { &clk_mcfuart0, &clk_mcfuart1, &clk_mcfuart2, + &clk_mcfqspi0, &clk_fec0, NULL }; /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m523x_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) u16 par; /* setup QSPS pins for QSPI with gpio CS control */ @@ -62,9 +63,8 @@ static void __init m523x_qspi_init(void) par = readw(MCFGPIO_PAR_TIMER); par &= 0x3f3f; writew(par, MCFGPIO_PAR_TIMER); -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -80,9 +80,7 @@ void __init config_BSP(char *commandp, int size) { mach_sched_init = hw_timer_init; m523x_fec_init(); -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m523x_qspi_init(); -#endif } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c index c80b5e51d29a..f6253a3313b3 100644 --- a/arch/m68k/platform/coldfire/m5249.c +++ b/arch/m68k/platform/coldfire/m5249.c @@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK); DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); struct clk *mcf_clks[] = { &clk_pll, @@ -34,6 +35,7 @@ struct clk *mcf_clks[] = { &clk_mcftmr1, &clk_mcfuart0, &clk_mcfuart1, + &clk_mcfqspi0, NULL }; @@ -71,17 +73,15 @@ static struct platform_device *m5249_devices[] __initdata = { /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m5249_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) /* QSPI irq setup */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, MCFSIM_QSPIICR); mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -110,9 +110,7 @@ void __init config_BSP(char *commandp, int size) #ifdef CONFIG_M5249C3 m5249_smc91x_init(); #endif -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m5249_qspi_init(); -#endif } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m525x.c b/arch/m68k/platform/coldfire/m525x.c index 5b9f657b2df0..1adba3909035 100644 --- a/arch/m68k/platform/coldfire/m525x.c +++ b/arch/m68k/platform/coldfire/m525x.c @@ -26,6 +26,7 @@ DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK); DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); struct clk *mcf_clks[] = { &clk_pll, @@ -34,6 +35,7 @@ struct clk *mcf_clks[] = { &clk_mcftmr1, &clk_mcfuart0, &clk_mcfuart1, + &clk_mcfqspi0, NULL }; diff --git a/arch/m68k/platform/coldfire/m5272.c b/arch/m68k/platform/coldfire/m5272.c index a8c5856fe5ec..8a4d3cc322c6 100644 --- a/arch/m68k/platform/coldfire/m5272.c +++ b/arch/m68k/platform/coldfire/m5272.c @@ -39,6 +39,7 @@ DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK); DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); struct clk *mcf_clks[] = { @@ -50,6 +51,7 @@ struct clk *mcf_clks[] = { &clk_mcftmr3, &clk_mcfuart0, &clk_mcfuart1, + &clk_mcfqspi0, &clk_fec0, NULL }; diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c index 6fbfe9096c3e..62d81ef016f1 100644 --- a/arch/m68k/platform/coldfire/m527x.c +++ b/arch/m68k/platform/coldfire/m527x.c @@ -33,6 +33,7 @@ DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK); @@ -46,6 +47,7 @@ struct clk *mcf_clks[] = { &clk_mcfuart0, &clk_mcfuart1, &clk_mcfuart2, + &clk_mcfqspi0, &clk_fec0, &clk_fec1, NULL @@ -53,10 +55,9 @@ struct clk *mcf_clks[] = { /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m527x_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) #if defined(CONFIG_M5271) u16 par; @@ -70,9 +71,8 @@ static void __init m527x_qspi_init(void) /* setup QSPS pins for QSPI with gpio CS control */ writew(0x003e, MCFGPIO_PAR_QSPI); #endif -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -120,9 +120,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m527x_uarts_init(); m527x_fec_init(); -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m527x_qspi_init(); -#endif } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c index b03a9d271837..21cd161d36f1 100644 --- a/arch/m68k/platform/coldfire/m528x.c +++ b/arch/m68k/platform/coldfire/m528x.c @@ -34,6 +34,7 @@ DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK); DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); +DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); struct clk *mcf_clks[] = { @@ -46,21 +47,20 @@ struct clk *mcf_clks[] = { &clk_mcfuart0, &clk_mcfuart1, &clk_mcfuart2, + &clk_mcfqspi0, &clk_fec0, NULL }; /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m528x_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) /* setup Port QS for QSPI with gpio CS control */ __raw_writeb(0x07, MCFGPIO_PQSPAR); -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -126,9 +126,7 @@ void __init config_BSP(char *commandp, int size) mach_sched_init = hw_timer_init; m528x_uarts_init(); m528x_fec_init(); -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m528x_qspi_init(); -#endif } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m53xx.c b/arch/m68k/platform/coldfire/m53xx.c index 5286f98fbed0..80879a7fe3d5 100644 --- a/arch/m68k/platform/coldfire/m53xx.c +++ b/arch/m68k/platform/coldfire/m53xx.c @@ -166,15 +166,13 @@ static void __init m53xx_clk_init(void) /***************************************************************************/ -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) - static void __init m53xx_qspi_init(void) { +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) /* setup QSPS pins for QSPI with gpio CS control */ writew(0x01f0, MCFGPIO_PAR_QSPI); -} - #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} /***************************************************************************/ @@ -219,9 +217,7 @@ void __init config_BSP(char *commandp, int size) m53xx_clk_init(); m53xx_uarts_init(); m53xx_fec_init(); -#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) m53xx_qspi_init(); -#endif #ifdef CONFIG_BDM_DISABLE /* diff --git a/arch/metag/include/asm/atomic.h b/arch/metag/include/asm/atomic.h index 307ecd2bd9a1..470e365f04ea 100644 --- a/arch/metag/include/asm/atomic.h +++ b/arch/metag/include/asm/atomic.h @@ -4,6 +4,7 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #if defined(CONFIG_METAG_ATOMICITY_IRQSOFF) /* The simple UP case. */ @@ -39,11 +40,6 @@ #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif #define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) diff --git a/arch/metag/include/asm/barrier.h b/arch/metag/include/asm/barrier.h index 2d6f0de77325..c7591e80067c 100644 --- a/arch/metag/include/asm/barrier.h +++ b/arch/metag/include/asm/barrier.h @@ -100,4 +100,7 @@ do { \ ___p1; \ }) +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + #endif /* _ASM_METAG_BARRIER_H */ diff --git a/arch/metag/include/asm/bitops.h b/arch/metag/include/asm/bitops.h index c0d0df0d1378..2671134ee745 100644 --- a/arch/metag/include/asm/bitops.h +++ b/arch/metag/include/asm/bitops.h @@ -5,12 +5,6 @@ #include <asm/barrier.h> #include <asm/global_lock.h> -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #ifdef CONFIG_SMP /* * These functions are the basis of our bit ops. diff --git a/arch/metag/include/asm/thread_info.h b/arch/metag/include/asm/thread_info.h index b19e9c588a16..47711336119e 100644 --- a/arch/metag/include/asm/thread_info.h +++ b/arch/metag/include/asm/thread_info.h @@ -117,10 +117,8 @@ static inline int kstack_end(void *addr) #define TIF_SECCOMP 5 /* secure computing */ #define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ #define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ -#define TIF_POLLING_NRFLAG 8 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 9 /* is terminating due to OOM killer */ -#define TIF_SYSCALL_TRACEPOINT 10 /* syscall tracepoint instrumentation */ +#define TIF_MEMDIE 8 /* is terminating due to OOM killer */ +#define TIF_SYSCALL_TRACEPOINT 9 /* syscall tracepoint instrumentation */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) diff --git a/arch/metag/kernel/setup.c b/arch/metag/kernel/setup.c index 129c7cdda1ce..31cf53d0eba2 100644 --- a/arch/metag/kernel/setup.c +++ b/arch/metag/kernel/setup.c @@ -105,10 +105,6 @@ extern char _heap_start[]; -#ifdef CONFIG_METAG_BUILTIN_DTB -extern u32 __dtb_start[]; -#endif - #ifdef CONFIG_DA_CONSOLE /* Our early channel based console driver */ extern struct console dash_console; diff --git a/arch/metag/mm/hugetlbpage.c b/arch/metag/mm/hugetlbpage.c index 042431509b56..3c52fa6d0f8e 100644 --- a/arch/metag/mm/hugetlbpage.c +++ b/arch/metag/mm/hugetlbpage.c @@ -110,11 +110,6 @@ int pud_huge(pud_t pud) return 0; } -int pmd_huge_support(void) -{ - return 1; -} - struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 935f9bec414a..335524040fff 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -44,11 +44,6 @@ struct pci_dev; */ #define pcibios_assign_all_busses() 0 -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #ifdef CONFIG_PCI extern void set_pci_dma_ops(struct dma_map_ops *dma_ops); extern struct dma_map_ops *get_pci_dma_ops(void); diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index b14232b6878f..fd56a8f66489 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -19,7 +19,6 @@ #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index abdfb10e7eca..68f099960ebc 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -43,13 +43,13 @@ #include <asm/pci-bridge.h> #ifdef CONFIG_EARLY_PRINTK -static char *stdout; +static const char *stdout; static int __init early_init_dt_scan_chosen_serial(unsigned long node, const char *uname, int depth, void *data) { - unsigned long l; - char *p; + int l; + const char *p; pr_debug("%s: depth: %d, uname: %s\n", __func__, depth, uname); @@ -80,7 +80,7 @@ static int __init early_init_dt_scan_chosen_serial(unsigned long node, (strncmp(p, "xlnx,opb-uartlite", 17) == 0) || (strncmp(p, "xlnx,axi-uartlite", 17) == 0) || (strncmp(p, "xlnx,mdm", 8) == 0)) { - unsigned int *addrp; + const unsigned int *addrp; *(u32 *)data = UARTLITE; @@ -114,34 +114,3 @@ void __init early_init_devtree(void *params) pr_debug(" <- early_init_devtree()\n"); } - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) -static struct debugfs_blob_wrapper flat_dt_blob; - -static int __init export_flat_device_tree(void) -{ - struct dentry *d; - - flat_dt_blob.data = initial_boot_params; - flat_dt_blob.size = initial_boot_params->totalsize; - - d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, - of_debugfs_root, &flat_dt_blob); - if (!d) - return 1; - - return 0; -} -device_initcall(export_flat_device_tree); -#endif diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 70996cc66aa2..a59de1bc1ce0 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -168,26 +168,6 @@ struct pci_controller *pci_find_hose_for_OF_device(struct device_node *node) return NULL; } -static ssize_t pci_show_devspec(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev(dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -/* Add sysfs properties */ -int pcibios_add_platform_entries(struct pci_dev *pdev) -{ - return device_create_file(&pdev->dev, &dev_attr_devspec); -} - void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 5cd695f905a1..5e0014e864f3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1756,14 +1756,14 @@ config KVM_GUEST help Select this option if building a guest kernel for KVM (Trap & Emulate) mode -config KVM_HOST_FREQ - int "KVM Host Processor Frequency (MHz)" +config KVM_GUEST_TIMER_FREQ + int "Count/Compare Timer Frequency (MHz)" depends on KVM_GUEST - default 500 + default 100 help - Select this option if building a guest kernel for KVM to skip - RTC emulation when determining guest CPU Frequency. Instead, the guest - processor frequency is automatically derived from the host frequency. + Set this to non-zero if building a guest kernel for KVM to skip RTC + emulation when determining guest CPU Frequency. Instead, the guest's + timer frequency is specified directly. choice prompt "Kernel page size" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1a5b4032cb66..60a359cfa328 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -151,7 +151,7 @@ cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ -Wa,--trap -cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1 -mno-mdmx -mno-mips3d,-march=r5000) \ -Wa,--trap cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 331b837cec57..f1bec00d5a85 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -1053,36 +1053,26 @@ void prom_free_prom_memory(void) int octeon_prune_device_tree(void); extern const char __dtb_octeon_3xxx_begin; -extern const char __dtb_octeon_3xxx_end; extern const char __dtb_octeon_68xx_begin; -extern const char __dtb_octeon_68xx_end; void __init device_tree_init(void) { - int dt_size; - struct boot_param_header *fdt; + const void *fdt; bool do_prune; if (octeon_bootinfo->minor_version >= 3 && octeon_bootinfo->fdt_addr) { fdt = phys_to_virt(octeon_bootinfo->fdt_addr); if (fdt_check_header(fdt)) panic("Corrupt Device Tree passed to kernel."); - dt_size = be32_to_cpu(fdt->totalsize); do_prune = false; } else if (OCTEON_IS_MODEL(OCTEON_CN68XX)) { - fdt = (struct boot_param_header *)&__dtb_octeon_68xx_begin; - dt_size = &__dtb_octeon_68xx_end - &__dtb_octeon_68xx_begin; + fdt = &__dtb_octeon_68xx_begin; do_prune = true; } else { - fdt = (struct boot_param_header *)&__dtb_octeon_3xxx_begin; - dt_size = &__dtb_octeon_3xxx_end - &__dtb_octeon_3xxx_begin; + fdt = &__dtb_octeon_3xxx_begin; do_prune = true; } - /* Copy the default tree from init memory. */ - initial_boot_params = early_init_dt_alloc_memory_arch(dt_size, 8); - if (initial_boot_params == NULL) - panic("Could not allocate initial_boot_params"); - memcpy(initial_boot_params, fdt, dt_size); + initial_boot_params = (void *)fdt; if (do_prune) { octeon_prune_device_tree(); @@ -1090,7 +1080,7 @@ void __init device_tree_init(void) } else { pr_info("Using passed Device Tree.\n"); } - unflatten_device_tree(); + unflatten_and_copy_device_tree(); } static int __initdata disable_octeon_edac_p; diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index e5b73de08fc5..002680648dcb 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -188,7 +188,6 @@ CONFIG_USB_KBD=y CONFIG_USB_MOUSE=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OTG_WHITELIST=y CONFIG_USB_WUSB_CBAF=m diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 343bebc4b63b..227a9de32246 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -297,7 +297,6 @@ CONFIG_HID_WACOM=m CONFIG_HID_ZEROPLUS=m CONFIG_ZEROPLUS_FF=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_OTG_WHITELIST=y diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index c16de9812920..7a346605c498 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -47,7 +47,6 @@ CONFIG_GPIO_VR41XX=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_VR41XX=y diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index d1142e9cd9a1..201edfb2637d 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -67,7 +67,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_PMCMSP=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 593946afc483..d269a5326a30 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -575,7 +575,6 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 59d9d2fdcd48..73e7bf49461c 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -301,7 +301,6 @@ CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/mips/configs/sb1250_swarm_defconfig b/arch/mips/configs/sb1250_swarm_defconfig index 5b0463ef9389..51bab13ef6f8 100644 --- a/arch/mips/configs/sb1250_swarm_defconfig +++ b/arch/mips/configs/sb1250_swarm_defconfig @@ -72,7 +72,6 @@ CONFIG_SERIO_RAW=m # CONFIG_HW_RANDOM is not set # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_EXT2_FS=y diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index 30036b4cbeb1..11f51505d562 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -72,7 +72,6 @@ CONFIG_GPIO_TB0219=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index 81bfa1d4d8e3..d99b1905a1ba 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -69,7 +69,6 @@ CONFIG_SERIAL_VR41XX_CONSOLE=y # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_OHCI_HCD=y diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index e8eb3d53a241..37b2befe651a 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -761,13 +761,4 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) #endif /* CONFIG_64BIT */ -/* - * atomic*_return operations are serializing but not the non-*_return - * versions. - */ -#define smp_mb__before_atomic_dec() smp_mb__before_llsc() -#define smp_mb__after_atomic_dec() smp_llsc_mb() -#define smp_mb__before_atomic_inc() smp_mb__before_llsc() -#define smp_mb__after_atomic_inc() smp_llsc_mb() - #endif /* _ASM_ATOMIC_H */ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index e1aa4e4c2984..d0101dd0575e 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -195,4 +195,7 @@ do { \ ___p1; \ }) +#define smp_mb__before_atomic() smp_mb__before_llsc() +#define smp_mb__after_atomic() smp_llsc_mb() + #endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 6a65d49e2c0d..7c8816f7b7c4 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -38,13 +38,6 @@ #endif /* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() smp_mb__before_llsc() -#define smp_mb__after_clear_bit() smp_llsc_mb() - - -/* * These are the "slower" versions of the functions and are in bitops.c. * These functions call raw_local_irq_{save,restore}(). */ @@ -120,7 +113,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) @@ -175,7 +168,7 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) */ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *addr) { - smp_mb__before_clear_bit(); + smp_mb__before_atomic(); clear_bit(nr, addr); } diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h index dc2135be2a3a..ff2707ab3295 100644 --- a/arch/mips/include/asm/cpu-info.h +++ b/arch/mips/include/asm/cpu-info.h @@ -39,14 +39,14 @@ struct cache_desc { #define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */ struct cpuinfo_mips { - unsigned int udelay_val; - unsigned int asid_cache; + unsigned long asid_cache; /* * Capability and feature descriptor structure for MIPS CPU */ unsigned long options; unsigned long ases; + unsigned int udelay_val; unsigned int processor_id; unsigned int fpu_id; unsigned int msa_id; diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 060aaa6348d7..b0aa95565752 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -19,6 +19,38 @@ #include <linux/threads.h> #include <linux/spinlock.h> +/* MIPS KVM register ids */ +#define MIPS_CP0_32(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U32 | 0x10000 | (8 * (_R) + (_S))) + +#define MIPS_CP0_64(_R, _S) \ + (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0x10000 | (8 * (_R) + (_S))) + +#define KVM_REG_MIPS_CP0_INDEX MIPS_CP0_32(0, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO0 MIPS_CP0_64(2, 0) +#define KVM_REG_MIPS_CP0_ENTRYLO1 MIPS_CP0_64(3, 0) +#define KVM_REG_MIPS_CP0_CONTEXT MIPS_CP0_64(4, 0) +#define KVM_REG_MIPS_CP0_USERLOCAL MIPS_CP0_64(4, 2) +#define KVM_REG_MIPS_CP0_PAGEMASK MIPS_CP0_32(5, 0) +#define KVM_REG_MIPS_CP0_PAGEGRAIN MIPS_CP0_32(5, 1) +#define KVM_REG_MIPS_CP0_WIRED MIPS_CP0_32(6, 0) +#define KVM_REG_MIPS_CP0_HWRENA MIPS_CP0_32(7, 0) +#define KVM_REG_MIPS_CP0_BADVADDR MIPS_CP0_64(8, 0) +#define KVM_REG_MIPS_CP0_COUNT MIPS_CP0_32(9, 0) +#define KVM_REG_MIPS_CP0_ENTRYHI MIPS_CP0_64(10, 0) +#define KVM_REG_MIPS_CP0_COMPARE MIPS_CP0_32(11, 0) +#define KVM_REG_MIPS_CP0_STATUS MIPS_CP0_32(12, 0) +#define KVM_REG_MIPS_CP0_CAUSE MIPS_CP0_32(13, 0) +#define KVM_REG_MIPS_CP0_EPC MIPS_CP0_64(14, 0) +#define KVM_REG_MIPS_CP0_EBASE MIPS_CP0_64(15, 1) +#define KVM_REG_MIPS_CP0_CONFIG MIPS_CP0_32(16, 0) +#define KVM_REG_MIPS_CP0_CONFIG1 MIPS_CP0_32(16, 1) +#define KVM_REG_MIPS_CP0_CONFIG2 MIPS_CP0_32(16, 2) +#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3) +#define KVM_REG_MIPS_CP0_CONFIG7 MIPS_CP0_32(16, 7) +#define KVM_REG_MIPS_CP0_XCONTEXT MIPS_CP0_64(20, 0) +#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0) + #define KVM_MAX_VCPUS 1 #define KVM_USER_MEM_SLOTS 8 @@ -372,8 +404,19 @@ struct kvm_vcpu_arch { u32 io_gpr; /* GPR used as IO source/target */ - /* Used to calibrate the virutal count register for the guest */ - int32_t host_cp0_count; + struct hrtimer comparecount_timer; + /* Count timer control KVM register */ + uint32_t count_ctl; + /* Count bias from the raw time */ + uint32_t count_bias; + /* Frequency of timer in Hz */ + uint32_t count_hz; + /* Dynamic nanosecond bias (multiple of count_period) to avoid overflow */ + s64 count_dyn_bias; + /* Resume time */ + ktime_t count_resume; + /* Period of timer tick in ns */ + u64 count_period; /* Bitmask of exceptions that are pending */ unsigned long pending_exceptions; @@ -394,8 +437,6 @@ struct kvm_vcpu_arch { uint32_t guest_kernel_asid[NR_CPUS]; struct mm_struct guest_kernel_mm, guest_user_mm; - struct hrtimer comparecount_timer; - int last_sched_cpu; /* WAIT executed */ @@ -410,6 +451,7 @@ struct kvm_vcpu_arch { #define kvm_read_c0_guest_context(cop0) (cop0->reg[MIPS_CP0_TLB_CONTEXT][0]) #define kvm_write_c0_guest_context(cop0, val) (cop0->reg[MIPS_CP0_TLB_CONTEXT][0] = (val)) #define kvm_read_c0_guest_userlocal(cop0) (cop0->reg[MIPS_CP0_TLB_CONTEXT][2]) +#define kvm_write_c0_guest_userlocal(cop0, val) (cop0->reg[MIPS_CP0_TLB_CONTEXT][2] = (val)) #define kvm_read_c0_guest_pagemask(cop0) (cop0->reg[MIPS_CP0_TLB_PG_MASK][0]) #define kvm_write_c0_guest_pagemask(cop0, val) (cop0->reg[MIPS_CP0_TLB_PG_MASK][0] = (val)) #define kvm_read_c0_guest_wired(cop0) (cop0->reg[MIPS_CP0_TLB_WIRED][0]) @@ -449,15 +491,74 @@ struct kvm_vcpu_arch { #define kvm_read_c0_guest_errorepc(cop0) (cop0->reg[MIPS_CP0_ERROR_PC][0]) #define kvm_write_c0_guest_errorepc(cop0, val) (cop0->reg[MIPS_CP0_ERROR_PC][0] = (val)) +/* + * Some of the guest registers may be modified asynchronously (e.g. from a + * hrtimer callback in hard irq context) and therefore need stronger atomicity + * guarantees than other registers. + */ + +static inline void _kvm_atomic_set_c0_guest_reg(unsigned long *reg, + unsigned long val) +{ + unsigned long temp; + do { + __asm__ __volatile__( + " .set mips3 \n" + " " __LL "%0, %1 \n" + " or %0, %2 \n" + " " __SC "%0, %1 \n" + " .set mips0 \n" + : "=&r" (temp), "+m" (*reg) + : "r" (val)); + } while (unlikely(!temp)); +} + +static inline void _kvm_atomic_clear_c0_guest_reg(unsigned long *reg, + unsigned long val) +{ + unsigned long temp; + do { + __asm__ __volatile__( + " .set mips3 \n" + " " __LL "%0, %1 \n" + " and %0, %2 \n" + " " __SC "%0, %1 \n" + " .set mips0 \n" + : "=&r" (temp), "+m" (*reg) + : "r" (~val)); + } while (unlikely(!temp)); +} + +static inline void _kvm_atomic_change_c0_guest_reg(unsigned long *reg, + unsigned long change, + unsigned long val) +{ + unsigned long temp; + do { + __asm__ __volatile__( + " .set mips3 \n" + " " __LL "%0, %1 \n" + " and %0, %2 \n" + " or %0, %3 \n" + " " __SC "%0, %1 \n" + " .set mips0 \n" + : "=&r" (temp), "+m" (*reg) + : "r" (~change), "r" (val & change)); + } while (unlikely(!temp)); +} + #define kvm_set_c0_guest_status(cop0, val) (cop0->reg[MIPS_CP0_STATUS][0] |= (val)) #define kvm_clear_c0_guest_status(cop0, val) (cop0->reg[MIPS_CP0_STATUS][0] &= ~(val)) -#define kvm_set_c0_guest_cause(cop0, val) (cop0->reg[MIPS_CP0_CAUSE][0] |= (val)) -#define kvm_clear_c0_guest_cause(cop0, val) (cop0->reg[MIPS_CP0_CAUSE][0] &= ~(val)) + +/* Cause can be modified asynchronously from hardirq hrtimer callback */ +#define kvm_set_c0_guest_cause(cop0, val) \ + _kvm_atomic_set_c0_guest_reg(&cop0->reg[MIPS_CP0_CAUSE][0], val) +#define kvm_clear_c0_guest_cause(cop0, val) \ + _kvm_atomic_clear_c0_guest_reg(&cop0->reg[MIPS_CP0_CAUSE][0], val) #define kvm_change_c0_guest_cause(cop0, change, val) \ -{ \ - kvm_clear_c0_guest_cause(cop0, change); \ - kvm_set_c0_guest_cause(cop0, ((val) & (change))); \ -} + _kvm_atomic_change_c0_guest_reg(&cop0->reg[MIPS_CP0_CAUSE][0], \ + change, val) + #define kvm_set_c0_guest_ebase(cop0, val) (cop0->reg[MIPS_CP0_PRID][1] |= (val)) #define kvm_clear_c0_guest_ebase(cop0, val) (cop0->reg[MIPS_CP0_PRID][1] &= ~(val)) #define kvm_change_c0_guest_ebase(cop0, change, val) \ @@ -468,29 +569,33 @@ struct kvm_vcpu_arch { struct kvm_mips_callbacks { - int (*handle_cop_unusable) (struct kvm_vcpu *vcpu); - int (*handle_tlb_mod) (struct kvm_vcpu *vcpu); - int (*handle_tlb_ld_miss) (struct kvm_vcpu *vcpu); - int (*handle_tlb_st_miss) (struct kvm_vcpu *vcpu); - int (*handle_addr_err_st) (struct kvm_vcpu *vcpu); - int (*handle_addr_err_ld) (struct kvm_vcpu *vcpu); - int (*handle_syscall) (struct kvm_vcpu *vcpu); - int (*handle_res_inst) (struct kvm_vcpu *vcpu); - int (*handle_break) (struct kvm_vcpu *vcpu); - int (*vm_init) (struct kvm *kvm); - int (*vcpu_init) (struct kvm_vcpu *vcpu); - int (*vcpu_setup) (struct kvm_vcpu *vcpu); - gpa_t(*gva_to_gpa) (gva_t gva); - void (*queue_timer_int) (struct kvm_vcpu *vcpu); - void (*dequeue_timer_int) (struct kvm_vcpu *vcpu); - void (*queue_io_int) (struct kvm_vcpu *vcpu, - struct kvm_mips_interrupt *irq); - void (*dequeue_io_int) (struct kvm_vcpu *vcpu, - struct kvm_mips_interrupt *irq); - int (*irq_deliver) (struct kvm_vcpu *vcpu, unsigned int priority, - uint32_t cause); - int (*irq_clear) (struct kvm_vcpu *vcpu, unsigned int priority, - uint32_t cause); + int (*handle_cop_unusable)(struct kvm_vcpu *vcpu); + int (*handle_tlb_mod)(struct kvm_vcpu *vcpu); + int (*handle_tlb_ld_miss)(struct kvm_vcpu *vcpu); + int (*handle_tlb_st_miss)(struct kvm_vcpu *vcpu); + int (*handle_addr_err_st)(struct kvm_vcpu *vcpu); + int (*handle_addr_err_ld)(struct kvm_vcpu *vcpu); + int (*handle_syscall)(struct kvm_vcpu *vcpu); + int (*handle_res_inst)(struct kvm_vcpu *vcpu); + int (*handle_break)(struct kvm_vcpu *vcpu); + int (*vm_init)(struct kvm *kvm); + int (*vcpu_init)(struct kvm_vcpu *vcpu); + int (*vcpu_setup)(struct kvm_vcpu *vcpu); + gpa_t (*gva_to_gpa)(gva_t gva); + void (*queue_timer_int)(struct kvm_vcpu *vcpu); + void (*dequeue_timer_int)(struct kvm_vcpu *vcpu); + void (*queue_io_int)(struct kvm_vcpu *vcpu, + struct kvm_mips_interrupt *irq); + void (*dequeue_io_int)(struct kvm_vcpu *vcpu, + struct kvm_mips_interrupt *irq); + int (*irq_deliver)(struct kvm_vcpu *vcpu, unsigned int priority, + uint32_t cause); + int (*irq_clear)(struct kvm_vcpu *vcpu, unsigned int priority, + uint32_t cause); + int (*get_one_reg)(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg, s64 *v); + int (*set_one_reg)(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg, s64 v); }; extern struct kvm_mips_callbacks *kvm_mips_callbacks; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks); @@ -609,7 +714,16 @@ extern enum emulation_result kvm_mips_emulate_bp_exc(unsigned long cause, extern enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, struct kvm_run *run); -enum emulation_result kvm_mips_emulate_count(struct kvm_vcpu *vcpu); +uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu); +void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count); +void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare); +void kvm_mips_init_count(struct kvm_vcpu *vcpu); +int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl); +int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume); +int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz); +void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu); +void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu); +enum hrtimer_restart kvm_mips_count_timeout(struct kvm_vcpu *vcpu); enum emulation_result kvm_mips_check_privilege(unsigned long cause, uint32_t *opc, @@ -646,7 +760,6 @@ extern int kvm_mips_trans_mtc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu); /* Misc */ -extern void mips32_SyncICache(unsigned long addr, unsigned long size); extern int kvm_mips_dump_stats(struct kvm_vcpu *vcpu); extern unsigned long kvm_mips_get_ramsize(struct kvm *kvm); diff --git a/arch/mips/include/asm/mach-jz4740/dma.h b/arch/mips/include/asm/mach-jz4740/dma.h index 509cd5828044..14ecc5313d2d 100644 --- a/arch/mips/include/asm/mach-jz4740/dma.h +++ b/arch/mips/include/asm/mach-jz4740/dma.h @@ -22,8 +22,6 @@ enum jz4740_dma_request_type { JZ4740_DMA_TYPE_UART_RECEIVE = 21, JZ4740_DMA_TYPE_SPI_TRANSMIT = 22, JZ4740_DMA_TYPE_SPI_RECEIVE = 23, - JZ4740_DMA_TYPE_AIC_TRANSMIT = 24, - JZ4740_DMA_TYPE_AIC_RECEIVE = 25, JZ4740_DMA_TYPE_MMC_TRANSMIT = 26, JZ4740_DMA_TYPE_MMC_RECEIVE = 27, JZ4740_DMA_TYPE_TCU = 28, diff --git a/arch/mips/include/asm/mips-boards/generic.h b/arch/mips/include/asm/mips-boards/generic.h index 48616816bcbc..c904c24550f6 100644 --- a/arch/mips/include/asm/mips-boards/generic.h +++ b/arch/mips/include/asm/mips-boards/generic.h @@ -67,10 +67,6 @@ extern int mips_revision_sconid; -#ifdef CONFIG_OF -extern struct boot_param_header __dtb_start; -#endif - #ifdef CONFIG_PCI extern void mips_pcibios_init(void); #else diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h index 12d6842962be..974b0e308963 100644 --- a/arch/mips/include/asm/pci.h +++ b/arch/mips/include/asm/pci.h @@ -73,11 +73,6 @@ extern unsigned long PCIBIOS_MIN_MEM; extern void pcibios_set_master(struct pci_dev *dev); -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #define HAVE_PCI_MMAP extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index ccd2b75f152c..a9494c0141fb 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -21,13 +21,13 @@ extern void device_tree_init(void); struct boot_param_header; -extern void __dt_setup_arch(struct boot_param_header *bph); +extern void __dt_setup_arch(void *bph); #define dt_setup_arch(sym) \ ({ \ - extern struct boot_param_header __dtb_##sym##_begin; \ + extern char __dtb_##sym##_begin[]; \ \ - __dt_setup_arch(&__dtb_##sym##_begin); \ + __dt_setup_arch(__dtb_##sym##_begin); \ }) #else /* CONFIG_OF */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index 413d6c612bec..e55813029d5a 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -29,7 +29,6 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_WAITPID #define __ARCH_WANT_SYS_SOCKETCALL diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h index f09ff5ae2059..2c04b6d9ff85 100644 --- a/arch/mips/include/uapi/asm/kvm.h +++ b/arch/mips/include/uapi/asm/kvm.h @@ -106,6 +106,41 @@ struct kvm_fpu { #define KVM_REG_MIPS_LO (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 33) #define KVM_REG_MIPS_PC (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 34) +/* KVM specific control registers */ + +/* + * CP0_Count control + * DC: Set 0: Master disable CP0_Count and set COUNT_RESUME to now + * Set 1: Master re-enable CP0_Count with unchanged bias, handling timer + * interrupts since COUNT_RESUME + * This can be used to freeze the timer to get a consistent snapshot of + * the CP0_Count and timer interrupt pending state, while also resuming + * safely without losing time or guest timer interrupts. + * Other: Reserved, do not change. + */ +#define KVM_REG_MIPS_COUNT_CTL (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \ + 0x20000 | 0) +#define KVM_REG_MIPS_COUNT_CTL_DC 0x00000001 + +/* + * CP0_Count resume monotonic nanoseconds + * The monotonic nanosecond time of the last set of COUNT_CTL.DC (master + * disable). Any reads and writes of Count related registers while + * COUNT_CTL.DC=1 will appear to occur at this time. When COUNT_CTL.DC is + * cleared again (master enable) any timer interrupts since this time will be + * emulated. + * Modifications to times in the future are rejected. + */ +#define KVM_REG_MIPS_COUNT_RESUME (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \ + 0x20000 | 1) +/* + * CP0_Count rate in Hz + * Specifies the rate of the CP0_Count timer in Hz. Modifications occur without + * discontinuities in CP0_Count. + */ +#define KVM_REG_MIPS_COUNT_HZ (KVM_REG_MIPS | KVM_REG_SIZE_U64 | \ + 0x20000 | 2) + /* * KVM MIPS specific structures and definitions * diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index 2692abb28e36..5805414777e0 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -381,7 +381,7 @@ #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 350 +#define __NR_O32_Linux_syscalls 351 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -710,7 +710,7 @@ #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 310 +#define __NR_64_Linux_syscalls 311 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1043,6 +1043,6 @@ #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 314 +#define __NR_N32_Linux_syscalls 315 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index c01900e5d078..088e92a79ae6 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -425,6 +425,15 @@ static struct platform_device qi_lb60_audio_device = { .id = -1, }; +static struct gpiod_lookup_table qi_lb60_audio_gpio_table = { + .dev_id = "qi-lb60-audio", + .table = { + GPIO_LOOKUP("Bank B", 29, "snd", 0), + GPIO_LOOKUP("Bank D", 4, "amp", 0), + { }, + }, +}; + static struct platform_device *jz_platform_devices[] __initdata = { &jz4740_udc_device, &jz4740_udc_xceiv_device, @@ -461,6 +470,8 @@ static int __init qi_lb60_init_platform_devices(void) jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata; jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata; + gpiod_add_lookup_table(&qi_lb60_audio_gpio_table); + jz4740_serial_device_register(); spi_register_board_info(qi_lb60_spi_board_info, diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 4d78bf445a9c..76122ff5cb5e 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -317,7 +317,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, if (regs->regs[insn.i_format.rs] == regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - if (insn.i_format.rt == beql_op) + if (insn.i_format.opcode == beql_op) ret = BRANCH_LIKELY_TAKEN; } else epc += 8; @@ -329,7 +329,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, if (regs->regs[insn.i_format.rs] != regs->regs[insn.i_format.rt]) { epc = epc + 4 + (insn.i_format.simmediate << 2); - if (insn.i_format.rt == bnel_op) + if (insn.i_format.opcode == bnel_op) ret = BRANCH_LIKELY_TAKEN; } else epc += 8; @@ -341,7 +341,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, /* rt field assumed to be zero */ if ((long)regs->regs[insn.i_format.rs] <= 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - if (insn.i_format.rt == bnel_op) + if (insn.i_format.opcode == blezl_op) ret = BRANCH_LIKELY_TAKEN; } else epc += 8; @@ -353,7 +353,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, /* rt field assumed to be zero */ if ((long)regs->regs[insn.i_format.rs] > 0) { epc = epc + 4 + (insn.i_format.simmediate << 2); - if (insn.i_format.rt == bnel_op) + if (insn.i_format.opcode == bgtzl_op) ret = BRANCH_LIKELY_TAKEN; } else epc += 8; diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index d1fea7a054be..1818da4dbb85 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -62,9 +62,9 @@ void __init alloc_legacy_irqno(void) void free_irqno(unsigned int irq) { - smp_mb__before_clear_bit(); + smp_mb__before_atomic(); clear_bit(irq, irq_map); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); } /* diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index 3c3b0df8f48d..5d39bb85bf35 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -47,7 +47,7 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS)); } -void __init __dt_setup_arch(struct boot_param_header *bph) +void __init __dt_setup_arch(void *bph) { if (!early_init_dt_scan(bph)) return; diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 71f85f427034..f639ccd5060c 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -163,7 +163,7 @@ int ptrace_get_watch_regs(struct task_struct *child, enum pt_watch_style style; int i; - if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0) return -EIO; if (!access_ok(VERIFY_WRITE, addr, sizeof(struct pt_watch_regs))) return -EIO; @@ -177,14 +177,14 @@ int ptrace_get_watch_regs(struct task_struct *child, #endif __put_user(style, &addr->style); - __put_user(current_cpu_data.watch_reg_use_cnt, + __put_user(boot_cpu_data.watch_reg_use_cnt, &addr->WATCH_STYLE.num_valid); - for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { __put_user(child->thread.watch.mips3264.watchlo[i], &addr->WATCH_STYLE.watchlo[i]); __put_user(child->thread.watch.mips3264.watchhi[i] & 0xfff, &addr->WATCH_STYLE.watchhi[i]); - __put_user(current_cpu_data.watch_reg_masks[i], + __put_user(boot_cpu_data.watch_reg_masks[i], &addr->WATCH_STYLE.watch_masks[i]); } for (; i < 8; i++) { @@ -204,12 +204,12 @@ int ptrace_set_watch_regs(struct task_struct *child, unsigned long lt[NUM_WATCH_REGS]; u16 ht[NUM_WATCH_REGS]; - if (!cpu_has_watch || current_cpu_data.watch_reg_use_cnt == 0) + if (!cpu_has_watch || boot_cpu_data.watch_reg_use_cnt == 0) return -EIO; if (!access_ok(VERIFY_READ, addr, sizeof(struct pt_watch_regs))) return -EIO; /* Check the values. */ - for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { __get_user(lt[i], &addr->WATCH_STYLE.watchlo[i]); #ifdef CONFIG_32BIT if (lt[i] & __UA_LIMIT) @@ -228,7 +228,7 @@ int ptrace_set_watch_regs(struct task_struct *child, return -EINVAL; } /* Install them. */ - for (i = 0; i < current_cpu_data.watch_reg_use_cnt; i++) { + for (i = 0; i < boot_cpu_data.watch_reg_use_cnt; i++) { if (lt[i] & 7) watch_active = 1; child->thread.watch.mips3264.watchlo[i] = lt[i]; diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 074e857ced28..8119ac2fdfc9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1545,7 +1545,7 @@ asmlinkage void cache_parity_error(void) reg_val & (1<<30) ? "secondary" : "primary", reg_val & (1<<31) ? "data" : "insn"); if (cpu_has_mips_r2 && - ((current_cpu_data.processor_id && 0xff0000) == PRID_COMP_MIPS)) { + ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) { pr_err("Error bits: %s%s%s%s%s%s%s%s\n", reg_val & (1<<29) ? "ED " : "", reg_val & (1<<28) ? "ET " : "", @@ -1585,7 +1585,7 @@ asmlinkage void do_ftlb(void) /* For the moment, report the problem and hang. */ if (cpu_has_mips_r2 && - ((current_cpu_data.processor_id && 0xff0000) == PRID_COMP_MIPS)) { + ((current_cpu_data.processor_id & 0xff0000) == PRID_COMP_MIPS)) { pr_err("FTLB error exception, cp0_ecc=0x%08x:\n", read_c0_ecc()); pr_err("cp0_errorepc == %0*lx\n", field, read_c0_errorepc()); diff --git a/arch/mips/kvm/kvm_locore.S b/arch/mips/kvm/kvm_locore.S index bbace092ad0a..033ac343e72c 100644 --- a/arch/mips/kvm/kvm_locore.S +++ b/arch/mips/kvm/kvm_locore.S @@ -611,35 +611,3 @@ MIPSX(exceptions): .word _C_LABEL(MIPSX(GuestException)) # 29 .word _C_LABEL(MIPSX(GuestException)) # 30 .word _C_LABEL(MIPSX(GuestException)) # 31 - - -/* This routine makes changes to the instruction stream effective to the hardware. - * It should be called after the instruction stream is written. - * On return, the new instructions are effective. - * Inputs: - * a0 = Start address of new instruction stream - * a1 = Size, in bytes, of new instruction stream - */ - -#define HW_SYNCI_Step $1 -LEAF(MIPSX(SyncICache)) - .set push - .set mips32r2 - beq a1, zero, 20f - nop - REG_ADDU a1, a0, a1 - rdhwr v0, HW_SYNCI_Step - beq v0, zero, 20f - nop -10: - synci 0(a0) - REG_ADDU a0, a0, v0 - sltu v1, a0, a1 - bne v1, zero, 10b - nop - sync -20: - jr.hb ra - nop - .set pop -END(MIPSX(SyncICache)) diff --git a/arch/mips/kvm/kvm_mips.c b/arch/mips/kvm/kvm_mips.c index da5186fbd77a..cd5e4f568439 100644 --- a/arch/mips/kvm/kvm_mips.c +++ b/arch/mips/kvm/kvm_mips.c @@ -61,11 +61,6 @@ static int kvm_mips_reset_vcpu(struct kvm_vcpu *vcpu) return 0; } -gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn) -{ - return gfn; -} - /* XXXKYMA: We are simulatoring a processor that has the WII bit set in Config7, so we * are "runnable" if interrupts are pending */ @@ -130,8 +125,8 @@ static void kvm_mips_init_vm_percpu(void *arg) int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { if (atomic_inc_return(&kvm_mips_instance) == 1) { - kvm_info("%s: 1st KVM instance, setup host TLB parameters\n", - __func__); + kvm_debug("%s: 1st KVM instance, setup host TLB parameters\n", + __func__); on_each_cpu(kvm_mips_init_vm_percpu, kvm, 1); } @@ -149,9 +144,7 @@ void kvm_mips_free_vcpus(struct kvm *kvm) if (kvm->arch.guest_pmap[i] != KVM_INVALID_PAGE) kvm_mips_release_pfn_clean(kvm->arch.guest_pmap[i]); } - - if (kvm->arch.guest_pmap) - kfree(kvm->arch.guest_pmap); + kfree(kvm->arch.guest_pmap); kvm_for_each_vcpu(i, vcpu, kvm) { kvm_arch_vcpu_free(vcpu); @@ -186,8 +179,8 @@ void kvm_arch_destroy_vm(struct kvm *kvm) /* If this is the last instance, restore wired count */ if (atomic_dec_return(&kvm_mips_instance) == 0) { - kvm_info("%s: last KVM instance, restoring TLB parameters\n", - __func__); + kvm_debug("%s: last KVM instance, restoring TLB parameters\n", + __func__); on_each_cpu(kvm_mips_uninit_tlbs, NULL, 1); } } @@ -249,9 +242,8 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, goto out; } - kvm_info - ("Allocated space for Guest PMAP Table (%ld pages) @ %p\n", - npages, kvm->arch.guest_pmap); + kvm_debug("Allocated space for Guest PMAP Table (%ld pages) @ %p\n", + npages, kvm->arch.guest_pmap); /* Now setup the page table */ for (i = 0; i < npages; i++) { @@ -296,7 +288,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) if (err) goto out_free_cpu; - kvm_info("kvm @ %p: create cpu %d at %p\n", kvm, id, vcpu); + kvm_debug("kvm @ %p: create cpu %d at %p\n", kvm, id, vcpu); /* Allocate space for host mode exception handlers that handle * guest mode exits @@ -304,7 +296,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) if (cpu_has_veic || cpu_has_vint) { size = 0x200 + VECTORSPACING * 64; } else { - size = 0x200; + size = 0x4000; } /* Save Linux EBASE */ @@ -316,8 +308,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) err = -ENOMEM; goto out_free_cpu; } - kvm_info("Allocated %d bytes for KVM Exception Handlers @ %p\n", - ALIGN(size, PAGE_SIZE), gebase); + kvm_debug("Allocated %d bytes for KVM Exception Handlers @ %p\n", + ALIGN(size, PAGE_SIZE), gebase); /* Save new ebase */ vcpu->arch.guest_ebase = gebase; @@ -342,15 +334,16 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) /* General handler, relocate to unmapped space for sanity's sake */ offset = 0x2000; - kvm_info("Installing KVM Exception handlers @ %p, %#x bytes\n", - gebase + offset, - mips32_GuestExceptionEnd - mips32_GuestException); + kvm_debug("Installing KVM Exception handlers @ %p, %#x bytes\n", + gebase + offset, + mips32_GuestExceptionEnd - mips32_GuestException); memcpy(gebase + offset, mips32_GuestException, mips32_GuestExceptionEnd - mips32_GuestException); /* Invalidate the icache for these ranges */ - mips32_SyncICache((unsigned long) gebase, ALIGN(size, PAGE_SIZE)); + local_flush_icache_range((unsigned long)gebase, + (unsigned long)gebase + ALIGN(size, PAGE_SIZE)); /* Allocate comm page for guest kernel, a TLB will be reserved for mapping GVA @ 0xFFFF8000 to this page */ vcpu->arch.kseg0_commpage = kzalloc(PAGE_SIZE << 1, GFP_KERNEL); @@ -360,14 +353,14 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) goto out_free_gebase; } - kvm_info("Allocated COMM page @ %p\n", vcpu->arch.kseg0_commpage); + kvm_debug("Allocated COMM page @ %p\n", vcpu->arch.kseg0_commpage); kvm_mips_commpage_init(vcpu); /* Init */ vcpu->arch.last_sched_cpu = -1; /* Start off the timer */ - kvm_mips_emulate_count(vcpu); + kvm_mips_init_count(vcpu); return vcpu; @@ -389,12 +382,8 @@ void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) kvm_mips_dump_stats(vcpu); - if (vcpu->arch.guest_ebase) - kfree(vcpu->arch.guest_ebase); - - if (vcpu->arch.kseg0_commpage) - kfree(vcpu->arch.kseg0_commpage); - + kfree(vcpu->arch.guest_ebase); + kfree(vcpu->arch.kseg0_commpage); } void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) @@ -423,11 +412,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) vcpu->mmio_needed = 0; } + local_irq_disable(); /* Check if we have any exceptions/interrupts pending */ kvm_mips_deliver_interrupts(vcpu, kvm_read_c0_guest_cause(vcpu->arch.cop0)); - local_irq_disable(); kvm_guest_enter(); r = __kvm_mips_vcpu_run(run, vcpu); @@ -490,36 +479,6 @@ kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -ENOIOCTLCMD; } -#define MIPS_CP0_32(_R, _S) \ - (KVM_REG_MIPS | KVM_REG_SIZE_U32 | 0x10000 | (8 * (_R) + (_S))) - -#define MIPS_CP0_64(_R, _S) \ - (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0x10000 | (8 * (_R) + (_S))) - -#define KVM_REG_MIPS_CP0_INDEX MIPS_CP0_32(0, 0) -#define KVM_REG_MIPS_CP0_ENTRYLO0 MIPS_CP0_64(2, 0) -#define KVM_REG_MIPS_CP0_ENTRYLO1 MIPS_CP0_64(3, 0) -#define KVM_REG_MIPS_CP0_CONTEXT MIPS_CP0_64(4, 0) -#define KVM_REG_MIPS_CP0_USERLOCAL MIPS_CP0_64(4, 2) -#define KVM_REG_MIPS_CP0_PAGEMASK MIPS_CP0_32(5, 0) -#define KVM_REG_MIPS_CP0_PAGEGRAIN MIPS_CP0_32(5, 1) -#define KVM_REG_MIPS_CP0_WIRED MIPS_CP0_32(6, 0) -#define KVM_REG_MIPS_CP0_HWRENA MIPS_CP0_32(7, 0) -#define KVM_REG_MIPS_CP0_BADVADDR MIPS_CP0_64(8, 0) -#define KVM_REG_MIPS_CP0_COUNT MIPS_CP0_32(9, 0) -#define KVM_REG_MIPS_CP0_ENTRYHI MIPS_CP0_64(10, 0) -#define KVM_REG_MIPS_CP0_COMPARE MIPS_CP0_32(11, 0) -#define KVM_REG_MIPS_CP0_STATUS MIPS_CP0_32(12, 0) -#define KVM_REG_MIPS_CP0_CAUSE MIPS_CP0_32(13, 0) -#define KVM_REG_MIPS_CP0_EBASE MIPS_CP0_64(15, 1) -#define KVM_REG_MIPS_CP0_CONFIG MIPS_CP0_32(16, 0) -#define KVM_REG_MIPS_CP0_CONFIG1 MIPS_CP0_32(16, 1) -#define KVM_REG_MIPS_CP0_CONFIG2 MIPS_CP0_32(16, 2) -#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3) -#define KVM_REG_MIPS_CP0_CONFIG7 MIPS_CP0_32(16, 7) -#define KVM_REG_MIPS_CP0_XCONTEXT MIPS_CP0_64(20, 0) -#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0) - static u64 kvm_mips_get_one_regs[] = { KVM_REG_MIPS_R0, KVM_REG_MIPS_R1, @@ -560,25 +519,34 @@ static u64 kvm_mips_get_one_regs[] = { KVM_REG_MIPS_CP0_INDEX, KVM_REG_MIPS_CP0_CONTEXT, + KVM_REG_MIPS_CP0_USERLOCAL, KVM_REG_MIPS_CP0_PAGEMASK, KVM_REG_MIPS_CP0_WIRED, + KVM_REG_MIPS_CP0_HWRENA, KVM_REG_MIPS_CP0_BADVADDR, + KVM_REG_MIPS_CP0_COUNT, KVM_REG_MIPS_CP0_ENTRYHI, + KVM_REG_MIPS_CP0_COMPARE, KVM_REG_MIPS_CP0_STATUS, KVM_REG_MIPS_CP0_CAUSE, - /* EPC set via kvm_regs, et al. */ + KVM_REG_MIPS_CP0_EPC, KVM_REG_MIPS_CP0_CONFIG, KVM_REG_MIPS_CP0_CONFIG1, KVM_REG_MIPS_CP0_CONFIG2, KVM_REG_MIPS_CP0_CONFIG3, KVM_REG_MIPS_CP0_CONFIG7, - KVM_REG_MIPS_CP0_ERROREPC + KVM_REG_MIPS_CP0_ERROREPC, + + KVM_REG_MIPS_COUNT_CTL, + KVM_REG_MIPS_COUNT_RESUME, + KVM_REG_MIPS_COUNT_HZ, }; static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { struct mips_coproc *cop0 = vcpu->arch.cop0; + int ret; s64 v; switch (reg->id) { @@ -601,24 +569,36 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, case KVM_REG_MIPS_CP0_CONTEXT: v = (long)kvm_read_c0_guest_context(cop0); break; + case KVM_REG_MIPS_CP0_USERLOCAL: + v = (long)kvm_read_c0_guest_userlocal(cop0); + break; case KVM_REG_MIPS_CP0_PAGEMASK: v = (long)kvm_read_c0_guest_pagemask(cop0); break; case KVM_REG_MIPS_CP0_WIRED: v = (long)kvm_read_c0_guest_wired(cop0); break; + case KVM_REG_MIPS_CP0_HWRENA: + v = (long)kvm_read_c0_guest_hwrena(cop0); + break; case KVM_REG_MIPS_CP0_BADVADDR: v = (long)kvm_read_c0_guest_badvaddr(cop0); break; case KVM_REG_MIPS_CP0_ENTRYHI: v = (long)kvm_read_c0_guest_entryhi(cop0); break; + case KVM_REG_MIPS_CP0_COMPARE: + v = (long)kvm_read_c0_guest_compare(cop0); + break; case KVM_REG_MIPS_CP0_STATUS: v = (long)kvm_read_c0_guest_status(cop0); break; case KVM_REG_MIPS_CP0_CAUSE: v = (long)kvm_read_c0_guest_cause(cop0); break; + case KVM_REG_MIPS_CP0_EPC: + v = (long)kvm_read_c0_guest_epc(cop0); + break; case KVM_REG_MIPS_CP0_ERROREPC: v = (long)kvm_read_c0_guest_errorepc(cop0); break; @@ -637,6 +617,15 @@ static int kvm_mips_get_reg(struct kvm_vcpu *vcpu, case KVM_REG_MIPS_CP0_CONFIG7: v = (long)kvm_read_c0_guest_config7(cop0); break; + /* registers to be handled specially */ + case KVM_REG_MIPS_CP0_COUNT: + case KVM_REG_MIPS_COUNT_CTL: + case KVM_REG_MIPS_COUNT_RESUME: + case KVM_REG_MIPS_COUNT_HZ: + ret = kvm_mips_callbacks->get_one_reg(vcpu, reg, &v); + if (ret) + return ret; + break; default: return -EINVAL; } @@ -697,12 +686,18 @@ static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, case KVM_REG_MIPS_CP0_CONTEXT: kvm_write_c0_guest_context(cop0, v); break; + case KVM_REG_MIPS_CP0_USERLOCAL: + kvm_write_c0_guest_userlocal(cop0, v); + break; case KVM_REG_MIPS_CP0_PAGEMASK: kvm_write_c0_guest_pagemask(cop0, v); break; case KVM_REG_MIPS_CP0_WIRED: kvm_write_c0_guest_wired(cop0, v); break; + case KVM_REG_MIPS_CP0_HWRENA: + kvm_write_c0_guest_hwrena(cop0, v); + break; case KVM_REG_MIPS_CP0_BADVADDR: kvm_write_c0_guest_badvaddr(cop0, v); break; @@ -712,12 +707,20 @@ static int kvm_mips_set_reg(struct kvm_vcpu *vcpu, case KVM_REG_MIPS_CP0_STATUS: kvm_write_c0_guest_status(cop0, v); break; - case KVM_REG_MIPS_CP0_CAUSE: - kvm_write_c0_guest_cause(cop0, v); + case KVM_REG_MIPS_CP0_EPC: + kvm_write_c0_guest_epc(cop0, v); break; case KVM_REG_MIPS_CP0_ERROREPC: kvm_write_c0_guest_errorepc(cop0, v); break; + /* registers to be handled specially */ + case KVM_REG_MIPS_CP0_COUNT: + case KVM_REG_MIPS_CP0_COMPARE: + case KVM_REG_MIPS_CP0_CAUSE: + case KVM_REG_MIPS_COUNT_CTL: + case KVM_REG_MIPS_COUNT_RESUME: + case KVM_REG_MIPS_COUNT_HZ: + return kvm_mips_callbacks->set_one_reg(vcpu, reg, v); default: return -EINVAL; } @@ -920,7 +923,7 @@ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu) return -1; printk("VCPU Register Dump:\n"); - printk("\tpc = 0x%08lx\n", vcpu->arch.pc);; + printk("\tpc = 0x%08lx\n", vcpu->arch.pc); printk("\texceptions: %08lx\n", vcpu->arch.pending_exceptions); for (i = 0; i < 32; i += 4) { @@ -969,7 +972,7 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) return 0; } -void kvm_mips_comparecount_func(unsigned long data) +static void kvm_mips_comparecount_func(unsigned long data) { struct kvm_vcpu *vcpu = (struct kvm_vcpu *)data; @@ -984,15 +987,13 @@ void kvm_mips_comparecount_func(unsigned long data) /* * low level hrtimer wake routine. */ -enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer) +static enum hrtimer_restart kvm_mips_comparecount_wakeup(struct hrtimer *timer) { struct kvm_vcpu *vcpu; vcpu = container_of(timer, struct kvm_vcpu, arch.comparecount_timer); kvm_mips_comparecount_func((unsigned long) vcpu); - hrtimer_forward_now(&vcpu->arch.comparecount_timer, - ktime_set(0, MS_TO_NS(10))); - return HRTIMER_RESTART; + return kvm_mips_count_timeout(vcpu); } int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) diff --git a/arch/mips/kvm/kvm_mips_dyntrans.c b/arch/mips/kvm/kvm_mips_dyntrans.c index 96528e2d1ea6..b80e41d858fd 100644 --- a/arch/mips/kvm/kvm_mips_dyntrans.c +++ b/arch/mips/kvm/kvm_mips_dyntrans.c @@ -16,6 +16,7 @@ #include <linux/vmalloc.h> #include <linux/fs.h> #include <linux/bootmem.h> +#include <asm/cacheflush.h> #include "kvm_mips_comm.h" @@ -40,7 +41,7 @@ kvm_mips_trans_cache_index(uint32_t inst, uint32_t *opc, CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa (vcpu, (unsigned long) opc)); memcpy((void *)kseg0_opc, (void *)&synci_inst, sizeof(uint32_t)); - mips32_SyncICache(kseg0_opc, 32); + local_flush_icache_range(kseg0_opc, kseg0_opc + 32); return result; } @@ -66,7 +67,7 @@ kvm_mips_trans_cache_va(uint32_t inst, uint32_t *opc, CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa (vcpu, (unsigned long) opc)); memcpy((void *)kseg0_opc, (void *)&synci_inst, sizeof(uint32_t)); - mips32_SyncICache(kseg0_opc, 32); + local_flush_icache_range(kseg0_opc, kseg0_opc + 32); return result; } @@ -99,11 +100,12 @@ kvm_mips_trans_mfc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu) CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa (vcpu, (unsigned long) opc)); memcpy((void *)kseg0_opc, (void *)&mfc0_inst, sizeof(uint32_t)); - mips32_SyncICache(kseg0_opc, 32); + local_flush_icache_range(kseg0_opc, kseg0_opc + 32); } else if (KVM_GUEST_KSEGX((unsigned long) opc) == KVM_GUEST_KSEG23) { local_irq_save(flags); memcpy((void *)opc, (void *)&mfc0_inst, sizeof(uint32_t)); - mips32_SyncICache((unsigned long) opc, 32); + local_flush_icache_range((unsigned long)opc, + (unsigned long)opc + 32); local_irq_restore(flags); } else { kvm_err("%s: Invalid address: %p\n", __func__, opc); @@ -134,11 +136,12 @@ kvm_mips_trans_mtc0(uint32_t inst, uint32_t *opc, struct kvm_vcpu *vcpu) CKSEG0ADDR(kvm_mips_translate_guest_kseg0_to_hpa (vcpu, (unsigned long) opc)); memcpy((void *)kseg0_opc, (void *)&mtc0_inst, sizeof(uint32_t)); - mips32_SyncICache(kseg0_opc, 32); + local_flush_icache_range(kseg0_opc, kseg0_opc + 32); } else if (KVM_GUEST_KSEGX((unsigned long) opc) == KVM_GUEST_KSEG23) { local_irq_save(flags); memcpy((void *)opc, (void *)&mtc0_inst, sizeof(uint32_t)); - mips32_SyncICache((unsigned long) opc, 32); + local_flush_icache_range((unsigned long)opc, + (unsigned long)opc + 32); local_irq_restore(flags); } else { kvm_err("%s: Invalid address: %p\n", __func__, opc); diff --git a/arch/mips/kvm/kvm_mips_emul.c b/arch/mips/kvm/kvm_mips_emul.c index e3fec99941a7..8d4840090082 100644 --- a/arch/mips/kvm/kvm_mips_emul.c +++ b/arch/mips/kvm/kvm_mips_emul.c @@ -11,6 +11,7 @@ #include <linux/errno.h> #include <linux/err.h> +#include <linux/ktime.h> #include <linux/kvm_host.h> #include <linux/module.h> #include <linux/vmalloc.h> @@ -228,25 +229,520 @@ enum emulation_result update_pc(struct kvm_vcpu *vcpu, uint32_t cause) return er; } -/* Everytime the compare register is written to, we need to decide when to fire - * the timer that represents timer ticks to the GUEST. +/** + * kvm_mips_count_disabled() - Find whether the CP0_Count timer is disabled. + * @vcpu: Virtual CPU. * + * Returns: 1 if the CP0_Count timer is disabled by either the guest + * CP0_Cause.DC bit or the count_ctl.DC bit. + * 0 otherwise (in which case CP0_Count timer is running). */ -enum emulation_result kvm_mips_emulate_count(struct kvm_vcpu *vcpu) +static inline int kvm_mips_count_disabled(struct kvm_vcpu *vcpu) { struct mips_coproc *cop0 = vcpu->arch.cop0; - enum emulation_result er = EMULATE_DONE; + return (vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) || + (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC); +} + +/** + * kvm_mips_ktime_to_count() - Scale ktime_t to a 32-bit count. + * + * Caches the dynamic nanosecond bias in vcpu->arch.count_dyn_bias. + * + * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). + */ +static uint32_t kvm_mips_ktime_to_count(struct kvm_vcpu *vcpu, ktime_t now) +{ + s64 now_ns, periods; + u64 delta; + + now_ns = ktime_to_ns(now); + delta = now_ns + vcpu->arch.count_dyn_bias; + + if (delta >= vcpu->arch.count_period) { + /* If delta is out of safe range the bias needs adjusting */ + periods = div64_s64(now_ns, vcpu->arch.count_period); + vcpu->arch.count_dyn_bias = -periods * vcpu->arch.count_period; + /* Recalculate delta with new bias */ + delta = now_ns + vcpu->arch.count_dyn_bias; + } + + /* + * We've ensured that: + * delta < count_period + * + * Therefore the intermediate delta*count_hz will never overflow since + * at the boundary condition: + * delta = count_period + * delta = NSEC_PER_SEC * 2^32 / count_hz + * delta * count_hz = NSEC_PER_SEC * 2^32 + */ + return div_u64(delta * vcpu->arch.count_hz, NSEC_PER_SEC); +} + +/** + * kvm_mips_count_time() - Get effective current time. + * @vcpu: Virtual CPU. + * + * Get effective monotonic ktime. This is usually a straightforward ktime_get(), + * except when the master disable bit is set in count_ctl, in which case it is + * count_resume, i.e. the time that the count was disabled. + * + * Returns: Effective monotonic ktime for CP0_Count. + */ +static inline ktime_t kvm_mips_count_time(struct kvm_vcpu *vcpu) +{ + if (unlikely(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC)) + return vcpu->arch.count_resume; + + return ktime_get(); +} + +/** + * kvm_mips_read_count_running() - Read the current count value as if running. + * @vcpu: Virtual CPU. + * @now: Kernel time to read CP0_Count at. + * + * Returns the current guest CP0_Count register at time @now and handles if the + * timer interrupt is pending and hasn't been handled yet. + * + * Returns: The current value of the guest CP0_Count register. + */ +static uint32_t kvm_mips_read_count_running(struct kvm_vcpu *vcpu, ktime_t now) +{ + ktime_t expires; + int running; + + /* Is the hrtimer pending? */ + expires = hrtimer_get_expires(&vcpu->arch.comparecount_timer); + if (ktime_compare(now, expires) >= 0) { + /* + * Cancel it while we handle it so there's no chance of + * interference with the timeout handler. + */ + running = hrtimer_cancel(&vcpu->arch.comparecount_timer); + + /* Nothing should be waiting on the timeout */ + kvm_mips_callbacks->queue_timer_int(vcpu); + + /* + * Restart the timer if it was running based on the expiry time + * we read, so that we don't push it back 2 periods. + */ + if (running) { + expires = ktime_add_ns(expires, + vcpu->arch.count_period); + hrtimer_start(&vcpu->arch.comparecount_timer, expires, + HRTIMER_MODE_ABS); + } + } + + /* Return the biased and scaled guest CP0_Count */ + return vcpu->arch.count_bias + kvm_mips_ktime_to_count(vcpu, now); +} + +/** + * kvm_mips_read_count() - Read the current count value. + * @vcpu: Virtual CPU. + * + * Read the current guest CP0_Count value, taking into account whether the timer + * is stopped. + * + * Returns: The current guest CP0_Count value. + */ +uint32_t kvm_mips_read_count(struct kvm_vcpu *vcpu) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + + /* If count disabled just read static copy of count */ + if (kvm_mips_count_disabled(vcpu)) + return kvm_read_c0_guest_count(cop0); + + return kvm_mips_read_count_running(vcpu, ktime_get()); +} + +/** + * kvm_mips_freeze_hrtimer() - Safely stop the hrtimer. + * @vcpu: Virtual CPU. + * @count: Output pointer for CP0_Count value at point of freeze. + * + * Freeze the hrtimer safely and return both the ktime and the CP0_Count value + * at the point it was frozen. It is guaranteed that any pending interrupts at + * the point it was frozen are handled, and none after that point. + * + * This is useful where the time/CP0_Count is needed in the calculation of the + * new parameters. + * + * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). + * + * Returns: The ktime at the point of freeze. + */ +static ktime_t kvm_mips_freeze_hrtimer(struct kvm_vcpu *vcpu, + uint32_t *count) +{ + ktime_t now; + + /* stop hrtimer before finding time */ + hrtimer_cancel(&vcpu->arch.comparecount_timer); + now = ktime_get(); + + /* find count at this point and handle pending hrtimer */ + *count = kvm_mips_read_count_running(vcpu, now); + + return now; +} + - /* If COUNT is enabled */ - if (!(kvm_read_c0_guest_cause(cop0) & CAUSEF_DC)) { - hrtimer_try_to_cancel(&vcpu->arch.comparecount_timer); - hrtimer_start(&vcpu->arch.comparecount_timer, - ktime_set(0, MS_TO_NS(10)), HRTIMER_MODE_REL); +/** + * kvm_mips_resume_hrtimer() - Resume hrtimer, updating expiry. + * @vcpu: Virtual CPU. + * @now: ktime at point of resume. + * @count: CP0_Count at point of resume. + * + * Resumes the timer and updates the timer expiry based on @now and @count. + * This can be used in conjunction with kvm_mips_freeze_timer() when timer + * parameters need to be changed. + * + * It is guaranteed that a timer interrupt immediately after resume will be + * handled, but not if CP_Compare is exactly at @count. That case is already + * handled by kvm_mips_freeze_timer(). + * + * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). + */ +static void kvm_mips_resume_hrtimer(struct kvm_vcpu *vcpu, + ktime_t now, uint32_t count) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + uint32_t compare; + u64 delta; + ktime_t expire; + + /* Calculate timeout (wrap 0 to 2^32) */ + compare = kvm_read_c0_guest_compare(cop0); + delta = (u64)(uint32_t)(compare - count - 1) + 1; + delta = div_u64(delta * NSEC_PER_SEC, vcpu->arch.count_hz); + expire = ktime_add_ns(now, delta); + + /* Update hrtimer to use new timeout */ + hrtimer_cancel(&vcpu->arch.comparecount_timer); + hrtimer_start(&vcpu->arch.comparecount_timer, expire, HRTIMER_MODE_ABS); +} + +/** + * kvm_mips_update_hrtimer() - Update next expiry time of hrtimer. + * @vcpu: Virtual CPU. + * + * Recalculates and updates the expiry time of the hrtimer. This can be used + * after timer parameters have been altered which do not depend on the time that + * the change occurs (in those cases kvm_mips_freeze_hrtimer() and + * kvm_mips_resume_hrtimer() are used directly). + * + * It is guaranteed that no timer interrupts will be lost in the process. + * + * Assumes !kvm_mips_count_disabled(@vcpu) (guest CP0_Count timer is running). + */ +static void kvm_mips_update_hrtimer(struct kvm_vcpu *vcpu) +{ + ktime_t now; + uint32_t count; + + /* + * freeze_hrtimer takes care of a timer interrupts <= count, and + * resume_hrtimer the hrtimer takes care of a timer interrupts > count. + */ + now = kvm_mips_freeze_hrtimer(vcpu, &count); + kvm_mips_resume_hrtimer(vcpu, now, count); +} + +/** + * kvm_mips_write_count() - Modify the count and update timer. + * @vcpu: Virtual CPU. + * @count: Guest CP0_Count value to set. + * + * Sets the CP0_Count value and updates the timer accordingly. + */ +void kvm_mips_write_count(struct kvm_vcpu *vcpu, uint32_t count) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + ktime_t now; + + /* Calculate bias */ + now = kvm_mips_count_time(vcpu); + vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now); + + if (kvm_mips_count_disabled(vcpu)) + /* The timer's disabled, adjust the static count */ + kvm_write_c0_guest_count(cop0, count); + else + /* Update timeout */ + kvm_mips_resume_hrtimer(vcpu, now, count); +} + +/** + * kvm_mips_init_count() - Initialise timer. + * @vcpu: Virtual CPU. + * + * Initialise the timer to a sensible frequency, namely 100MHz, zero it, and set + * it going if it's enabled. + */ +void kvm_mips_init_count(struct kvm_vcpu *vcpu) +{ + /* 100 MHz */ + vcpu->arch.count_hz = 100*1000*1000; + vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32, + vcpu->arch.count_hz); + vcpu->arch.count_dyn_bias = 0; + + /* Starting at 0 */ + kvm_mips_write_count(vcpu, 0); +} + +/** + * kvm_mips_set_count_hz() - Update the frequency of the timer. + * @vcpu: Virtual CPU. + * @count_hz: Frequency of CP0_Count timer in Hz. + * + * Change the frequency of the CP0_Count timer. This is done atomically so that + * CP0_Count is continuous and no timer interrupt is lost. + * + * Returns: -EINVAL if @count_hz is out of range. + * 0 on success. + */ +int kvm_mips_set_count_hz(struct kvm_vcpu *vcpu, s64 count_hz) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + int dc; + ktime_t now; + u32 count; + + /* ensure the frequency is in a sensible range... */ + if (count_hz <= 0 || count_hz > NSEC_PER_SEC) + return -EINVAL; + /* ... and has actually changed */ + if (vcpu->arch.count_hz == count_hz) + return 0; + + /* Safely freeze timer so we can keep it continuous */ + dc = kvm_mips_count_disabled(vcpu); + if (dc) { + now = kvm_mips_count_time(vcpu); + count = kvm_read_c0_guest_count(cop0); } else { - hrtimer_try_to_cancel(&vcpu->arch.comparecount_timer); + now = kvm_mips_freeze_hrtimer(vcpu, &count); } - return er; + /* Update the frequency */ + vcpu->arch.count_hz = count_hz; + vcpu->arch.count_period = div_u64((u64)NSEC_PER_SEC << 32, count_hz); + vcpu->arch.count_dyn_bias = 0; + + /* Calculate adjusted bias so dynamic count is unchanged */ + vcpu->arch.count_bias = count - kvm_mips_ktime_to_count(vcpu, now); + + /* Update and resume hrtimer */ + if (!dc) + kvm_mips_resume_hrtimer(vcpu, now, count); + return 0; +} + +/** + * kvm_mips_write_compare() - Modify compare and update timer. + * @vcpu: Virtual CPU. + * @compare: New CP0_Compare value. + * + * Update CP0_Compare to a new value and update the timeout. + */ +void kvm_mips_write_compare(struct kvm_vcpu *vcpu, uint32_t compare) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + + /* if unchanged, must just be an ack */ + if (kvm_read_c0_guest_compare(cop0) == compare) + return; + + /* Update compare */ + kvm_write_c0_guest_compare(cop0, compare); + + /* Update timeout if count enabled */ + if (!kvm_mips_count_disabled(vcpu)) + kvm_mips_update_hrtimer(vcpu); +} + +/** + * kvm_mips_count_disable() - Disable count. + * @vcpu: Virtual CPU. + * + * Disable the CP0_Count timer. A timer interrupt on or before the final stop + * time will be handled but not after. + * + * Assumes CP0_Count was previously enabled but now Guest.CP0_Cause.DC or + * count_ctl.DC has been set (count disabled). + * + * Returns: The time that the timer was stopped. + */ +static ktime_t kvm_mips_count_disable(struct kvm_vcpu *vcpu) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + uint32_t count; + ktime_t now; + + /* Stop hrtimer */ + hrtimer_cancel(&vcpu->arch.comparecount_timer); + + /* Set the static count from the dynamic count, handling pending TI */ + now = ktime_get(); + count = kvm_mips_read_count_running(vcpu, now); + kvm_write_c0_guest_count(cop0, count); + + return now; +} + +/** + * kvm_mips_count_disable_cause() - Disable count using CP0_Cause.DC. + * @vcpu: Virtual CPU. + * + * Disable the CP0_Count timer and set CP0_Cause.DC. A timer interrupt on or + * before the final stop time will be handled if the timer isn't disabled by + * count_ctl.DC, but not after. + * + * Assumes CP0_Cause.DC is clear (count enabled). + */ +void kvm_mips_count_disable_cause(struct kvm_vcpu *vcpu) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + + kvm_set_c0_guest_cause(cop0, CAUSEF_DC); + if (!(vcpu->arch.count_ctl & KVM_REG_MIPS_COUNT_CTL_DC)) + kvm_mips_count_disable(vcpu); +} + +/** + * kvm_mips_count_enable_cause() - Enable count using CP0_Cause.DC. + * @vcpu: Virtual CPU. + * + * Enable the CP0_Count timer and clear CP0_Cause.DC. A timer interrupt after + * the start time will be handled if the timer isn't disabled by count_ctl.DC, + * potentially before even returning, so the caller should be careful with + * ordering of CP0_Cause modifications so as not to lose it. + * + * Assumes CP0_Cause.DC is set (count disabled). + */ +void kvm_mips_count_enable_cause(struct kvm_vcpu *vcpu) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + uint32_t count; + + kvm_clear_c0_guest_cause(cop0, CAUSEF_DC); + + /* + * Set the dynamic count to match the static count. + * This starts the hrtimer if count_ctl.DC allows it. + * Otherwise it conveniently updates the biases. + */ + count = kvm_read_c0_guest_count(cop0); + kvm_mips_write_count(vcpu, count); +} + +/** + * kvm_mips_set_count_ctl() - Update the count control KVM register. + * @vcpu: Virtual CPU. + * @count_ctl: Count control register new value. + * + * Set the count control KVM register. The timer is updated accordingly. + * + * Returns: -EINVAL if reserved bits are set. + * 0 on success. + */ +int kvm_mips_set_count_ctl(struct kvm_vcpu *vcpu, s64 count_ctl) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + s64 changed = count_ctl ^ vcpu->arch.count_ctl; + s64 delta; + ktime_t expire, now; + uint32_t count, compare; + + /* Only allow defined bits to be changed */ + if (changed & ~(s64)(KVM_REG_MIPS_COUNT_CTL_DC)) + return -EINVAL; + + /* Apply new value */ + vcpu->arch.count_ctl = count_ctl; + + /* Master CP0_Count disable */ + if (changed & KVM_REG_MIPS_COUNT_CTL_DC) { + /* Is CP0_Cause.DC already disabling CP0_Count? */ + if (kvm_read_c0_guest_cause(cop0) & CAUSEF_DC) { + if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) + /* Just record the current time */ + vcpu->arch.count_resume = ktime_get(); + } else if (count_ctl & KVM_REG_MIPS_COUNT_CTL_DC) { + /* disable timer and record current time */ + vcpu->arch.count_resume = kvm_mips_count_disable(vcpu); + } else { + /* + * Calculate timeout relative to static count at resume + * time (wrap 0 to 2^32). + */ + count = kvm_read_c0_guest_count(cop0); + compare = kvm_read_c0_guest_compare(cop0); + delta = (u64)(uint32_t)(compare - count - 1) + 1; + delta = div_u64(delta * NSEC_PER_SEC, + vcpu->arch.count_hz); + expire = ktime_add_ns(vcpu->arch.count_resume, delta); + + /* Handle pending interrupt */ + now = ktime_get(); + if (ktime_compare(now, expire) >= 0) + /* Nothing should be waiting on the timeout */ + kvm_mips_callbacks->queue_timer_int(vcpu); + + /* Resume hrtimer without changing bias */ + count = kvm_mips_read_count_running(vcpu, now); + kvm_mips_resume_hrtimer(vcpu, now, count); + } + } + + return 0; +} + +/** + * kvm_mips_set_count_resume() - Update the count resume KVM register. + * @vcpu: Virtual CPU. + * @count_resume: Count resume register new value. + * + * Set the count resume KVM register. + * + * Returns: -EINVAL if out of valid range (0..now). + * 0 on success. + */ +int kvm_mips_set_count_resume(struct kvm_vcpu *vcpu, s64 count_resume) +{ + /* + * It doesn't make sense for the resume time to be in the future, as it + * would be possible for the next interrupt to be more than a full + * period in the future. + */ + if (count_resume < 0 || count_resume > ktime_to_ns(ktime_get())) + return -EINVAL; + + vcpu->arch.count_resume = ns_to_ktime(count_resume); + return 0; +} + +/** + * kvm_mips_count_timeout() - Push timer forward on timeout. + * @vcpu: Virtual CPU. + * + * Handle an hrtimer event by push the hrtimer forward a period. + * + * Returns: The hrtimer_restart value to return to the hrtimer subsystem. + */ +enum hrtimer_restart kvm_mips_count_timeout(struct kvm_vcpu *vcpu) +{ + /* Add the Count period to the current expiry time */ + hrtimer_add_expires_ns(&vcpu->arch.comparecount_timer, + vcpu->arch.count_period); + return HRTIMER_RESTART; } enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu) @@ -471,8 +967,7 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, #endif /* Get reg */ if ((rd == MIPS_CP0_COUNT) && (sel == 0)) { - /* XXXKYMA: Run the Guest count register @ 1/4 the rate of the host */ - vcpu->arch.gprs[rt] = (read_c0_count() >> 2); + vcpu->arch.gprs[rt] = kvm_mips_read_count(vcpu); } else if ((rd == MIPS_CP0_ERRCTL) && (sel == 0)) { vcpu->arch.gprs[rt] = 0x0; #ifdef CONFIG_KVM_MIPS_DYN_TRANS @@ -539,10 +1034,7 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, } /* Are we writing to COUNT */ else if ((rd == MIPS_CP0_COUNT) && (sel == 0)) { - /* Linux doesn't seem to write into COUNT, we throw an error - * if we notice a write to COUNT - */ - /*er = EMULATE_FAIL; */ + kvm_mips_write_count(vcpu, vcpu->arch.gprs[rt]); goto done; } else if ((rd == MIPS_CP0_COMPARE) && (sel == 0)) { kvm_debug("[%#x] MTCz, COMPARE %#lx <- %#lx\n", @@ -552,8 +1044,8 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, /* If we are writing to COMPARE */ /* Clear pending timer interrupt, if any */ kvm_mips_callbacks->dequeue_timer_int(vcpu); - kvm_write_c0_guest_compare(cop0, - vcpu->arch.gprs[rt]); + kvm_mips_write_compare(vcpu, + vcpu->arch.gprs[rt]); } else if ((rd == MIPS_CP0_STATUS) && (sel == 0)) { kvm_write_c0_guest_status(cop0, vcpu->arch.gprs[rt]); @@ -564,6 +1056,20 @@ kvm_mips_emulate_CP0(uint32_t inst, uint32_t *opc, uint32_t cause, #ifdef CONFIG_KVM_MIPS_DYN_TRANS kvm_mips_trans_mtc0(inst, opc, vcpu); #endif + } else if ((rd == MIPS_CP0_CAUSE) && (sel == 0)) { + uint32_t old_cause, new_cause; + old_cause = kvm_read_c0_guest_cause(cop0); + new_cause = vcpu->arch.gprs[rt]; + /* Update R/W bits */ + kvm_change_c0_guest_cause(cop0, 0x08800300, + new_cause); + /* DC bit enabling/disabling timer? */ + if ((old_cause ^ new_cause) & CAUSEF_DC) { + if (new_cause & CAUSEF_DC) + kvm_mips_count_disable_cause(vcpu); + else + kvm_mips_count_enable_cause(vcpu); + } } else { cop0->reg[rd][sel] = vcpu->arch.gprs[rt]; #ifdef CONFIG_KVM_MIPS_DYN_TRANS @@ -887,7 +1393,7 @@ int kvm_mips_sync_icache(unsigned long va, struct kvm_vcpu *vcpu) printk("%s: va: %#lx, unmapped: %#x\n", __func__, va, CKSEG0ADDR(pa)); - mips32_SyncICache(CKSEG0ADDR(pa), 32); + local_flush_icache_range(CKSEG0ADDR(pa), 32); return 0; } @@ -1325,8 +1831,12 @@ kvm_mips_handle_tlbmod(unsigned long cause, uint32_t *opc, struct kvm_run *run, struct kvm_vcpu *vcpu) { enum emulation_result er = EMULATE_DONE; - #ifdef DEBUG + struct mips_coproc *cop0 = vcpu->arch.cop0; + unsigned long entryhi = (vcpu->arch.host_cp0_badvaddr & VPN2_MASK) | + (kvm_read_c0_guest_entryhi(cop0) & ASID_MASK); + int index; + /* * If address not in the guest TLB, then we are in trouble */ @@ -1553,8 +2063,7 @@ kvm_mips_handle_ri(unsigned long cause, uint32_t *opc, current_cpu_data.icache.linesz); break; case 2: /* Read count register */ - printk("RDHWR: Cont register\n"); - arch->gprs[rt] = kvm_read_c0_guest_count(cop0); + arch->gprs[rt] = kvm_mips_read_count(vcpu); break; case 3: /* Count register resolution */ switch (current_cpu_data.cputype) { @@ -1810,11 +2319,9 @@ kvm_mips_handle_tlbmiss(unsigned long cause, uint32_t *opc, er = EMULATE_FAIL; } } else { -#ifdef DEBUG kvm_debug ("Injecting hi: %#lx, lo0: %#lx, lo1: %#lx into shadow host TLB\n", tlb->tlb_hi, tlb->tlb_lo0, tlb->tlb_lo1); -#endif /* OK we have a Guest TLB entry, now inject it into the shadow host TLB */ kvm_mips_handle_mapped_seg_tlb_fault(vcpu, tlb, NULL, NULL); diff --git a/arch/mips/kvm/kvm_tlb.c b/arch/mips/kvm/kvm_tlb.c index 50ab9c4d4a5d..8a5a700ad8de 100644 --- a/arch/mips/kvm/kvm_tlb.c +++ b/arch/mips/kvm/kvm_tlb.c @@ -222,26 +222,19 @@ kvm_mips_host_tlb_write(struct kvm_vcpu *vcpu, unsigned long entryhi, return -1; } - if (idx < 0) { - idx = read_c0_random() % current_cpu_data.tlbsize; - write_c0_index(idx); - mtc0_tlbw_hazard(); - } write_c0_entrylo0(entrylo0); write_c0_entrylo1(entrylo1); mtc0_tlbw_hazard(); - tlb_write_indexed(); + if (idx < 0) + tlb_write_random(); + else + tlb_write_indexed(); tlbw_use_hazard(); -#ifdef DEBUG - if (debug) { - kvm_debug("@ %#lx idx: %2d [entryhi(R): %#lx] " - "entrylo0(R): 0x%08lx, entrylo1(R): 0x%08lx\n", - vcpu->arch.pc, idx, read_c0_entryhi(), - read_c0_entrylo0(), read_c0_entrylo1()); - } -#endif + kvm_debug("@ %#lx idx: %2d [entryhi(R): %#lx] entrylo0(R): 0x%08lx, entrylo1(R): 0x%08lx\n", + vcpu->arch.pc, idx, read_c0_entryhi(), + read_c0_entrylo0(), read_c0_entrylo1()); /* Flush D-cache */ if (flush_dcache_mask) { @@ -348,11 +341,9 @@ int kvm_mips_handle_commpage_tlb_fault(unsigned long badvaddr, mtc0_tlbw_hazard(); tlbw_use_hazard(); -#ifdef DEBUG kvm_debug ("@ %#lx idx: %2d [entryhi(R): %#lx] entrylo0 (R): 0x%08lx, entrylo1(R): 0x%08lx\n", vcpu->arch.pc, read_c0_index(), read_c0_entryhi(), read_c0_entrylo0(), read_c0_entrylo1()); -#endif /* Restore old ASID */ write_c0_entryhi(old_entryhi); @@ -400,10 +391,8 @@ kvm_mips_handle_mapped_seg_tlb_fault(struct kvm_vcpu *vcpu, entrylo1 = mips3_paddr_to_tlbpfn(pfn1 << PAGE_SHIFT) | (0x3 << 3) | (tlb->tlb_lo1 & MIPS3_PG_D) | (tlb->tlb_lo1 & MIPS3_PG_V); -#ifdef DEBUG kvm_debug("@ %#lx tlb_lo0: 0x%08lx tlb_lo1: 0x%08lx\n", vcpu->arch.pc, tlb->tlb_lo0, tlb->tlb_lo1); -#endif return kvm_mips_host_tlb_write(vcpu, entryhi, entrylo0, entrylo1, tlb->tlb_mask); @@ -424,10 +413,8 @@ int kvm_mips_guest_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long entryhi) } } -#ifdef DEBUG kvm_debug("%s: entryhi: %#lx, index: %d lo0: %#lx, lo1: %#lx\n", __func__, entryhi, index, tlb[i].tlb_lo0, tlb[i].tlb_lo1); -#endif return index; } @@ -461,9 +448,7 @@ int kvm_mips_host_tlb_lookup(struct kvm_vcpu *vcpu, unsigned long vaddr) local_irq_restore(flags); -#ifdef DEBUG kvm_debug("Host TLB lookup, %#lx, idx: %2d\n", vaddr, idx); -#endif return idx; } @@ -508,12 +493,9 @@ int kvm_mips_host_tlb_inv(struct kvm_vcpu *vcpu, unsigned long va) local_irq_restore(flags); -#ifdef DEBUG - if (idx > 0) { + if (idx > 0) kvm_debug("%s: Invalidated entryhi %#lx @ idx %d\n", __func__, - (va & VPN2_MASK) | (vcpu->arch.asid_map[va & ASID_MASK] & ASID_MASK), idx); - } -#endif + (va & VPN2_MASK) | kvm_mips_get_user_asid(vcpu), idx); return 0; } @@ -658,15 +640,30 @@ void kvm_local_flush_tlb_all(void) local_irq_restore(flags); } +/** + * kvm_mips_migrate_count() - Migrate timer. + * @vcpu: Virtual CPU. + * + * Migrate CP0_Count hrtimer to the current CPU by cancelling and restarting it + * if it was running prior to being cancelled. + * + * Must be called when the VCPU is migrated to a different CPU to ensure that + * timer expiry during guest execution interrupts the guest and causes the + * interrupt to be delivered in a timely manner. + */ +static void kvm_mips_migrate_count(struct kvm_vcpu *vcpu) +{ + if (hrtimer_cancel(&vcpu->arch.comparecount_timer)) + hrtimer_restart(&vcpu->arch.comparecount_timer); +} + /* Restore ASID once we are scheduled back after preemption */ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { unsigned long flags; int newasid = 0; -#ifdef DEBUG kvm_debug("%s: vcpu %p, cpu: %d\n", __func__, vcpu, cpu); -#endif /* Alocate new kernel and user ASIDs if needed */ @@ -682,17 +679,23 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) vcpu->arch.guest_user_mm.context.asid[cpu]; newasid++; - kvm_info("[%d]: cpu_context: %#lx\n", cpu, - cpu_context(cpu, current->mm)); - kvm_info("[%d]: Allocated new ASID for Guest Kernel: %#x\n", - cpu, vcpu->arch.guest_kernel_asid[cpu]); - kvm_info("[%d]: Allocated new ASID for Guest User: %#x\n", cpu, - vcpu->arch.guest_user_asid[cpu]); + kvm_debug("[%d]: cpu_context: %#lx\n", cpu, + cpu_context(cpu, current->mm)); + kvm_debug("[%d]: Allocated new ASID for Guest Kernel: %#x\n", + cpu, vcpu->arch.guest_kernel_asid[cpu]); + kvm_debug("[%d]: Allocated new ASID for Guest User: %#x\n", cpu, + vcpu->arch.guest_user_asid[cpu]); } if (vcpu->arch.last_sched_cpu != cpu) { - kvm_info("[%d->%d]KVM VCPU[%d] switch\n", - vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id); + kvm_debug("[%d->%d]KVM VCPU[%d] switch\n", + vcpu->arch.last_sched_cpu, cpu, vcpu->vcpu_id); + /* + * Migrate the timer interrupt to the current CPU so that it + * always interrupts the guest and synchronously triggers a + * guest timer interrupt. + */ + kvm_mips_migrate_count(vcpu); } if (!newasid) { diff --git a/arch/mips/kvm/kvm_trap_emul.c b/arch/mips/kvm/kvm_trap_emul.c index 30d725321db1..693f952b2fbb 100644 --- a/arch/mips/kvm/kvm_trap_emul.c +++ b/arch/mips/kvm/kvm_trap_emul.c @@ -32,9 +32,7 @@ static gpa_t kvm_trap_emul_gva_to_gpa_cb(gva_t gva) gpa = KVM_INVALID_ADDR; } -#ifdef DEBUG kvm_debug("%s: gva %#lx, gpa: %#llx\n", __func__, gva, gpa); -#endif return gpa; } @@ -85,11 +83,9 @@ static int kvm_trap_emul_handle_tlb_mod(struct kvm_vcpu *vcpu) if (KVM_GUEST_KSEGX(badvaddr) < KVM_GUEST_KSEG0 || KVM_GUEST_KSEGX(badvaddr) == KVM_GUEST_KSEG23) { -#ifdef DEBUG kvm_debug ("USER/KSEG23 ADDR TLB MOD fault: cause %#lx, PC: %p, BadVaddr: %#lx\n", cause, opc, badvaddr); -#endif er = kvm_mips_handle_tlbmod(cause, opc, run, vcpu); if (er == EMULATE_DONE) @@ -138,11 +134,9 @@ static int kvm_trap_emul_handle_tlb_st_miss(struct kvm_vcpu *vcpu) } } else if (KVM_GUEST_KSEGX(badvaddr) < KVM_GUEST_KSEG0 || KVM_GUEST_KSEGX(badvaddr) == KVM_GUEST_KSEG23) { -#ifdef DEBUG kvm_debug ("USER ADDR TLB LD fault: cause %#lx, PC: %p, BadVaddr: %#lx\n", cause, opc, badvaddr); -#endif er = kvm_mips_handle_tlbmiss(cause, opc, run, vcpu); if (er == EMULATE_DONE) ret = RESUME_GUEST; @@ -188,10 +182,8 @@ static int kvm_trap_emul_handle_tlb_ld_miss(struct kvm_vcpu *vcpu) } } else if (KVM_GUEST_KSEGX(badvaddr) < KVM_GUEST_KSEG0 || KVM_GUEST_KSEGX(badvaddr) == KVM_GUEST_KSEG23) { -#ifdef DEBUG kvm_debug("USER ADDR TLB ST fault: PC: %#lx, BadVaddr: %#lx\n", vcpu->arch.pc, badvaddr); -#endif /* User Address (UA) fault, this could happen if * (1) TLB entry not present/valid in both Guest and shadow host TLBs, in this @@ -236,9 +228,7 @@ static int kvm_trap_emul_handle_addr_err_st(struct kvm_vcpu *vcpu) if (KVM_GUEST_KERNEL_MODE(vcpu) && (KSEGX(badvaddr) == CKSEG0 || KSEGX(badvaddr) == CKSEG1)) { -#ifdef DEBUG kvm_debug("Emulate Store to MMIO space\n"); -#endif er = kvm_mips_emulate_inst(cause, opc, run, vcpu); if (er == EMULATE_FAIL) { printk("Emulate Store to MMIO space failed\n"); @@ -268,9 +258,7 @@ static int kvm_trap_emul_handle_addr_err_ld(struct kvm_vcpu *vcpu) int ret = RESUME_GUEST; if (KSEGX(badvaddr) == CKSEG0 || KSEGX(badvaddr) == CKSEG1) { -#ifdef DEBUG kvm_debug("Emulate Load from MMIO space @ %#lx\n", badvaddr); -#endif er = kvm_mips_emulate_inst(cause, opc, run, vcpu); if (er == EMULATE_FAIL) { printk("Emulate Load from MMIO space failed\n"); @@ -401,6 +389,78 @@ static int kvm_trap_emul_vcpu_setup(struct kvm_vcpu *vcpu) return 0; } +static int kvm_trap_emul_get_one_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg, + s64 *v) +{ + switch (reg->id) { + case KVM_REG_MIPS_CP0_COUNT: + *v = kvm_mips_read_count(vcpu); + break; + case KVM_REG_MIPS_COUNT_CTL: + *v = vcpu->arch.count_ctl; + break; + case KVM_REG_MIPS_COUNT_RESUME: + *v = ktime_to_ns(vcpu->arch.count_resume); + break; + case KVM_REG_MIPS_COUNT_HZ: + *v = vcpu->arch.count_hz; + break; + default: + return -EINVAL; + } + return 0; +} + +static int kvm_trap_emul_set_one_reg(struct kvm_vcpu *vcpu, + const struct kvm_one_reg *reg, + s64 v) +{ + struct mips_coproc *cop0 = vcpu->arch.cop0; + int ret = 0; + + switch (reg->id) { + case KVM_REG_MIPS_CP0_COUNT: + kvm_mips_write_count(vcpu, v); + break; + case KVM_REG_MIPS_CP0_COMPARE: + kvm_mips_write_compare(vcpu, v); + break; + case KVM_REG_MIPS_CP0_CAUSE: + /* + * If the timer is stopped or started (DC bit) it must look + * atomic with changes to the interrupt pending bits (TI, IRQ5). + * A timer interrupt should not happen in between. + */ + if ((kvm_read_c0_guest_cause(cop0) ^ v) & CAUSEF_DC) { + if (v & CAUSEF_DC) { + /* disable timer first */ + kvm_mips_count_disable_cause(vcpu); + kvm_change_c0_guest_cause(cop0, ~CAUSEF_DC, v); + } else { + /* enable timer last */ + kvm_change_c0_guest_cause(cop0, ~CAUSEF_DC, v); + kvm_mips_count_enable_cause(vcpu); + } + } else { + kvm_write_c0_guest_cause(cop0, v); + } + break; + case KVM_REG_MIPS_COUNT_CTL: + ret = kvm_mips_set_count_ctl(vcpu, v); + break; + case KVM_REG_MIPS_COUNT_RESUME: + ret = kvm_mips_set_count_resume(vcpu, v); + break; + case KVM_REG_MIPS_COUNT_HZ: + ret = kvm_mips_set_count_hz(vcpu, v); + break; + default: + return -EINVAL; + } + return ret; +} + static struct kvm_mips_callbacks kvm_trap_emul_callbacks = { /* exit handlers */ .handle_cop_unusable = kvm_trap_emul_handle_cop_unusable, @@ -423,6 +483,8 @@ static struct kvm_mips_callbacks kvm_trap_emul_callbacks = { .dequeue_io_int = kvm_mips_dequeue_io_int_cb, .irq_deliver = kvm_mips_irq_deliver_cb, .irq_clear = kvm_mips_irq_clear_cb, + .get_one_reg = kvm_trap_emul_get_one_reg, + .set_one_reg = kvm_trap_emul_set_one_reg, }; int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks) diff --git a/arch/mips/lantiq/prom.c b/arch/mips/lantiq/prom.c index 19686c5bc5ed..7447d322d14e 100644 --- a/arch/mips/lantiq/prom.c +++ b/arch/mips/lantiq/prom.c @@ -71,23 +71,12 @@ void __init plat_mem_setup(void) * Load the builtin devicetree. This causes the chosen node to be * parsed resulting in our memory appearing */ - __dt_setup_arch(&__dtb_start); + __dt_setup_arch(__dtb_start); } void __init device_tree_init(void) { - unsigned long base, size; - - if (!initial_boot_params) - return; - - base = virt_to_phys((void *)initial_boot_params); - size = be32_to_cpu(initial_boot_params->totalsize); - - /* Before we do anything, lets reserve the dt blob */ - reserve_bootmem(base, size, BOOTMEM_DEFAULT); - - unflatten_device_tree(); + unflatten_and_copy_device_tree(); } void __init prom_init(void) diff --git a/arch/mips/lantiq/prom.h b/arch/mips/lantiq/prom.h index 8e07b5f28ef1..bfd2d58c1d69 100644 --- a/arch/mips/lantiq/prom.h +++ b/arch/mips/lantiq/prom.h @@ -26,6 +26,4 @@ struct ltq_soc_info { extern void ltq_soc_detect(struct ltq_soc_info *i); extern void ltq_soc_init(void); -extern struct boot_param_header __dtb_start; - #endif diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index c639b9db0012..12c75db23420 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -27,8 +27,7 @@ #include <cs5536/cs5536_mfgpt.h> -DEFINE_SPINLOCK(mfgpt_lock); -EXPORT_SYMBOL(mfgpt_lock); +static DEFINE_RAW_SPINLOCK(mfgpt_lock); static u32 mfgpt_base; @@ -55,7 +54,7 @@ EXPORT_SYMBOL(enable_mfgpt0_counter); static void init_mfgpt_timer(enum clock_event_mode mode, struct clock_event_device *evt) { - spin_lock(&mfgpt_lock); + raw_spin_lock(&mfgpt_lock); switch (mode) { case CLOCK_EVT_MODE_PERIODIC: @@ -79,7 +78,7 @@ static void init_mfgpt_timer(enum clock_event_mode mode, /* Nothing to do here */ break; } - spin_unlock(&mfgpt_lock); + raw_spin_unlock(&mfgpt_lock); } static struct clock_event_device mfgpt_clockevent = { @@ -157,7 +156,7 @@ static cycle_t mfgpt_read(struct clocksource *cs) static int old_count; static u32 old_jifs; - spin_lock_irqsave(&mfgpt_lock, flags); + raw_spin_lock_irqsave(&mfgpt_lock, flags); /* * Although our caller may have the read side of xtime_lock, * this is now a seqlock, and we are cheating in this routine @@ -191,7 +190,7 @@ static cycle_t mfgpt_read(struct clocksource *cs) old_count = count; old_jifs = jifs; - spin_unlock_irqrestore(&mfgpt_lock, flags); + raw_spin_unlock_irqrestore(&mfgpt_lock, flags); return (cycle_t) (jifs * COMPARE) + count; } diff --git a/arch/mips/loongson/lemote-2f/clock.c b/arch/mips/loongson/lemote-2f/clock.c index 67dd94ef28e6..1eed38e28b1e 100644 --- a/arch/mips/loongson/lemote-2f/clock.c +++ b/arch/mips/loongson/lemote-2f/clock.c @@ -91,10 +91,9 @@ EXPORT_SYMBOL(clk_put); int clk_set_rate(struct clk *clk, unsigned long rate) { - unsigned int rate_khz = rate / 1000; + struct cpufreq_frequency_table *pos; int ret = 0; int regval; - int i; if (likely(clk->ops && clk->ops->set_rate)) { unsigned long flags; @@ -107,22 +106,16 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (unlikely(clk->flags & CLK_RATE_PROPAGATES)) propagate_rate(clk); - for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END; - i++) { - if (loongson2_clockmod_table[i].frequency == - CPUFREQ_ENTRY_INVALID) - continue; - if (rate_khz == loongson2_clockmod_table[i].frequency) + cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table) + if (rate == pos->frequency) break; - } - if (rate_khz != loongson2_clockmod_table[i].frequency) + if (rate != pos->frequency) return -ENOTSUPP; clk->rate = rate; regval = LOONGSON_CHIPCFG0; - regval = (regval & ~0x7) | - (loongson2_clockmod_table[i].driver_data - 1); + regval = (regval & ~0x7) | (pos->driver_data - 1); LOONGSON_CHIPCFG0 = regval; return ret; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 9e67cdea3c74..f7b91d3a371d 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -31,6 +31,7 @@ void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, void (*flush_icache_range)(unsigned long start, unsigned long end); EXPORT_SYMBOL_GPL(flush_icache_range); void (*local_flush_icache_range)(unsigned long start, unsigned long end); +EXPORT_SYMBOL_GPL(local_flush_icache_range); void (*__flush_cache_vmap)(void); void (*__flush_cache_vunmap)(void); diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index 77e0ae036e7c..4ec8ee10d371 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -84,11 +84,6 @@ int pud_huge(pud_t pud) return (pud_val(pud) & _PAGE_HUGE) != 0; } -int pmd_huge_support(void) -{ - return 1; -} - struct page * follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 58033c44690d..b611102e23b5 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -273,7 +273,7 @@ void build_clear_page(void) uasm_i_ori(&buf, A2, A0, off); if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) - uasm_i_lui(&buf, AT, 0xa000); + uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000)); off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) * cache_line_size : 0; @@ -424,7 +424,7 @@ void build_copy_page(void) uasm_i_ori(&buf, A2, A0, off); if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) - uasm_i_lui(&buf, AT, 0xa000); + uasm_i_lui(&buf, AT, uasm_rel_hi(0xa0000000)); off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * cache_line_size : 0; diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 6d0f4ab3632d..f2364e419682 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -27,7 +27,7 @@ unsigned long physical_memsize = 0L; fw_memblock_t * __init fw_getmdesc(int eva) { char *memsize_str, *ememsize_str __maybe_unused = NULL, *ptr; - unsigned long memsize, ememsize __maybe_unused = 0; + unsigned long memsize = 0, ememsize __maybe_unused = 0; static char cmdline[COMMAND_LINE_SIZE] __initdata; int tmp; diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c index 319009912142..3778a359f3ad 100644 --- a/arch/mips/mti-malta/malta-time.c +++ b/arch/mips/mti-malta/malta-time.c @@ -74,18 +74,8 @@ static void __init estimate_frequencies(void) unsigned int giccount = 0, gicstart = 0; #endif -#if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ) - unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK); - - /* - * XXXKYMA: hardwire the CPU frequency to Host Freq/4 - */ - count = (CONFIG_KVM_HOST_FREQ * 1000000) >> 3; - if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) && - (prid != (PRID_COMP_MIPS | PRID_IMP_25KF))) - count *= 2; - - mips_hpt_frequency = count; +#if defined(CONFIG_KVM_GUEST) && CONFIG_KVM_GUEST_TIMER_FREQ + mips_hpt_frequency = CONFIG_KVM_GUEST_TIMER_FREQ * 1000000; return; #endif diff --git a/arch/mips/mti-sead3/sead3-setup.c b/arch/mips/mti-sead3/sead3-setup.c index bf7fe48bf2f9..e43f4801a245 100644 --- a/arch/mips/mti-sead3/sead3-setup.c +++ b/arch/mips/mti-sead3/sead3-setup.c @@ -69,17 +69,17 @@ static void __init parse_memsize_param(void) if (!memsize) return; - offset = fdt_path_offset(&__dtb_start, "/memory"); + offset = fdt_path_offset(__dtb_start, "/memory"); if (offset > 0) { uint64_t new_value; /* * reg contains 2 32-bits BE values, offset and size. We just * want to replace the size value without affecting the offset */ - prop_value = fdt_getprop(&__dtb_start, offset, "reg", &prop_len); + prop_value = fdt_getprop(__dtb_start, offset, "reg", &prop_len); new_value = be64_to_cpu(*prop_value); new_value = (new_value & ~0xffffffffllu) | memsize; - fdt_setprop_inplace_u64(&__dtb_start, offset, "reg", new_value); + fdt_setprop_inplace_u64(__dtb_start, offset, "reg", new_value); } } @@ -92,7 +92,7 @@ void __init plat_mem_setup(void) * Load the builtin devicetree. This causes the chosen node to be * parsed resulting in our memory appearing */ - __dt_setup_arch(&__dtb_start); + __dt_setup_arch(__dtb_start); } void __init device_tree_init(void) diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c index 5754097b9cde..bdde33147bce 100644 --- a/arch/mips/netlogic/xlp/dt.c +++ b/arch/mips/netlogic/xlp/dt.c @@ -42,7 +42,7 @@ #include <asm/prom.h> extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], - __dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[], __dtb_start[]; + __dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[]; static void *xlp_fdt_blob; void __init *xlp_dt_init(void *fdtp) @@ -87,22 +87,7 @@ void __init xlp_early_init_devtree(void) void __init device_tree_init(void) { - unsigned long base, size; - struct boot_param_header *fdtp = xlp_fdt_blob; - - if (!fdtp) - return; - - base = virt_to_phys(fdtp); - size = be32_to_cpu(fdtp->totalsize); - - /* Before we do anything, lets reserve the dt blob */ - reserve_bootmem(base, size, BOOTMEM_DEFAULT); - - unflatten_device_tree(); - - /* free the space reserved for the dt blob */ - free_bootmem(base, size); + unflatten_and_copy_device_tree(); } static struct of_device_id __initdata xlp_ids[] = { diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c index afd8405e0188..3249685e03ad 100644 --- a/arch/mips/pci/msi-xlp.c +++ b/arch/mips/pci/msi-xlp.c @@ -206,14 +206,8 @@ static struct irq_chip xlp_msix_chip = { .irq_unmask = unmask_msi_irq, }; -void destroy_irq(unsigned int irq) -{ - /* nothing to do yet */ -} - void arch_teardown_msi_irq(unsigned int irq) { - destroy_irq(irq); } /* @@ -298,10 +292,8 @@ static int xlp_setup_msi(uint64_t lnkbase, int node, int link, xirq = xirq + msivec; /* msi mapped to global irq space */ ret = irq_set_msi_desc(xirq, desc); - if (ret < 0) { - destroy_irq(xirq); + if (ret < 0) return ret; - } write_msi_msg(xirq, &msg); return 0; diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c index b128cb973ebe..7f6ce6d734c0 100644 --- a/arch/mips/pci/pci-rc32434.c +++ b/arch/mips/pci/pci-rc32434.c @@ -53,7 +53,6 @@ static struct resource rc32434_res_pci_mem1 = { .start = 0x50000000, .end = 0x5FFFFFFF, .flags = IORESOURCE_MEM, - .parent = &rc32434_res_pci_mem1, .sibling = NULL, .child = &rc32434_res_pci_mem2 }; diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 4427abbd48b5..0dde80332d3a 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -214,14 +214,8 @@ static int get_irq_vector(const struct pci_dev *dev) } #ifdef CONFIG_PCI_MSI -void destroy_irq(unsigned int irq) -{ - /* nothing to do yet */ -} - void arch_teardown_msi_irq(unsigned int irq) { - destroy_irq(irq); } int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) @@ -263,10 +257,8 @@ int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) MSI_DATA_DELIVERY_FIXED; ret = irq_set_msi_desc(irq, desc); - if (ret < 0) { - destroy_irq(irq); + if (ret < 0) return ret; - } write_msi_msg(irq, &msg); return 0; diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c index eccc5526155e..251395210e23 100644 --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c @@ -28,8 +28,6 @@ __iomem void *rt_sysc_membase; __iomem void *rt_memc_membase; -extern struct boot_param_header __dtb_start; - __iomem void *plat_of_remap_node(const char *node) { struct resource res; @@ -52,30 +50,7 @@ __iomem void *plat_of_remap_node(const char *node) void __init device_tree_init(void) { - unsigned long base, size; - void *fdt_copy; - - if (!initial_boot_params) - return; - - base = virt_to_phys((void *)initial_boot_params); - size = be32_to_cpu(initial_boot_params->totalsize); - - /* Before we do anything, lets reserve the dt blob */ - reserve_bootmem(base, size, BOOTMEM_DEFAULT); - - /* The strings in the flattened tree are referenced directly by the - * device tree, so copy the flattened device tree from init memory - * to regular memory. - */ - fdt_copy = alloc_bootmem(size); - memcpy(fdt_copy, initial_boot_params, size); - initial_boot_params = fdt_copy; - - unflatten_device_tree(); - - /* free the space reserved for the dt blob */ - free_bootmem(base, size); + unflatten_and_copy_device_tree(); } void __init plat_mem_setup(void) @@ -86,7 +61,7 @@ void __init plat_mem_setup(void) * Load the builtin devicetree. This causes the chosen node to be * parsed resulting in our memory appearing */ - __dt_setup_arch(&__dtb_start); + __dt_setup_arch(__dtb_start); if (soc_info.mem_size) add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, diff --git a/arch/mn10300/include/asm/atomic.h b/arch/mn10300/include/asm/atomic.h index 975e1841ca64..cadeb1e2cdfc 100644 --- a/arch/mn10300/include/asm/atomic.h +++ b/arch/mn10300/include/asm/atomic.h @@ -13,6 +13,7 @@ #include <asm/irqflags.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #ifndef CONFIG_SMP #include <asm-generic/atomic.h> @@ -234,12 +235,6 @@ static inline void atomic_set_mask(unsigned long mask, unsigned long *addr) #endif } -/* Atomic operations are already serializing on MN10300??? */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* __KERNEL__ */ #endif /* CONFIG_SMP */ #endif /* _ASM_ATOMIC_H */ diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h index 596bb2706d81..fe6f8e2c3617 100644 --- a/arch/mn10300/include/asm/bitops.h +++ b/arch/mn10300/include/asm/bitops.h @@ -18,9 +18,7 @@ #define __ASM_BITOPS_H #include <asm/cpu-regs.h> - -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +#include <asm/barrier.h> /* * set bit diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h index 166323824683..5f70af25c7d0 100644 --- a/arch/mn10300/include/asm/pci.h +++ b/arch/mn10300/include/asm/pci.h @@ -48,7 +48,6 @@ extern void unit_pci_init(void); #define PCIBIOS_MIN_MEM 0xB8000000 void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq); /* Dynamic DMA mapping stuff. * i386 has everything mapped statically. diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 9d4e2d1ef90e..0522468f488b 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -26,7 +26,6 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/mn10300/mm/tlb-smp.c b/arch/mn10300/mm/tlb-smp.c index 3e57faf04083..e5d0ef722bfa 100644 --- a/arch/mn10300/mm/tlb-smp.c +++ b/arch/mn10300/mm/tlb-smp.c @@ -78,9 +78,9 @@ void smp_flush_tlb(void *unused) else local_flush_tlb_page(flush_mm, flush_va); - smp_mb__before_clear_bit(); + smp_mb__before_atomic(); cpumask_clear_cpu(cpu_id, &flush_cpumask); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); out: put_cpu(); } diff --git a/arch/mn10300/unit-asb2305/pci-irq.c b/arch/mn10300/unit-asb2305/pci-irq.c index 77439da04671..fcb28ceb824d 100644 --- a/arch/mn10300/unit-asb2305/pci-irq.c +++ b/arch/mn10300/unit-asb2305/pci-irq.c @@ -40,10 +40,6 @@ void __init pcibios_fixup_irqs(void) } } -void __init pcibios_penalize_isa_irq(int irq) -{ -} - void pcibios_enable_irq(struct pci_dev *dev) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); diff --git a/arch/openrisc/include/asm/bitops.h b/arch/openrisc/include/asm/bitops.h index 2c64f2228dc7..3003cdad561b 100644 --- a/arch/openrisc/include/asm/bitops.h +++ b/arch/openrisc/include/asm/bitops.h @@ -27,14 +27,7 @@ #include <linux/irqflags.h> #include <linux/compiler.h> - -/* - * clear_bit may not imply a memory barrier - */ -#ifndef smp_mb__before_clear_bit -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() -#endif +#include <asm/barrier.h> #include <asm/bitops/__ffs.h> #include <asm-generic/bitops/ffz.h> diff --git a/arch/openrisc/kernel/vmlinux.h b/arch/openrisc/kernel/vmlinux.h index 70b9ce41835c..bbcdf21b0b35 100644 --- a/arch/openrisc/kernel/vmlinux.h +++ b/arch/openrisc/kernel/vmlinux.h @@ -5,6 +5,4 @@ extern char __initrd_start, __initrd_end; #endif -extern u32 __dtb_start[]; - #endif diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index acacd348df89..fb92b8920785 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -127,8 +127,6 @@ CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_AD1889=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/default_defconfig index ba61495e1fa4..4d8127e8428a 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/default_defconfig @@ -145,7 +145,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig index 28c1b5de044e..dc0d7ce71ea7 100644 --- a/arch/parisc/configs/generic-64bit_defconfig +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -219,7 +219,6 @@ CONFIG_HIDRAW=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=m diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h index 472886ceab1d..0be2db2c7d44 100644 --- a/arch/parisc/include/asm/atomic.h +++ b/arch/parisc/include/asm/atomic.h @@ -7,6 +7,7 @@ #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> /* * Atomic operations that C can't guarantee us. Useful for @@ -143,11 +144,6 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) #define ATOMIC_INIT(i) { (i) } -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #ifdef CONFIG_64BIT #define ATOMIC64_INIT(i) { (i) } diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h index 8c9b631d2a78..3f9406d9b9d6 100644 --- a/arch/parisc/include/asm/bitops.h +++ b/arch/parisc/include/asm/bitops.h @@ -8,6 +8,7 @@ #include <linux/compiler.h> #include <asm/types.h> /* for BITS_PER_LONG/SHIFT_PER_LONG */ #include <asm/byteorder.h> +#include <asm/barrier.h> #include <linux/atomic.h> /* @@ -19,9 +20,6 @@ #define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1)) -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - /* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion * on use of volatile and __*_bit() (set/clear/change): * *_bit() want use of volatile. diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h index 465154076d23..20df2b04fc09 100644 --- a/arch/parisc/include/asm/pci.h +++ b/arch/parisc/include/asm/pci.h @@ -215,11 +215,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, } #endif -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't need to penalize isa irq's */ -} - static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { return channel ? 15 : 14; diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index 74d835820ee7..5f4c68daa261 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -145,7 +145,6 @@ type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) \ #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_COMPAT_SYS_TIME diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index f1432da7b4c0..c5fa7a697fba 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -432,7 +432,7 @@ ENTRY_SAME(sched_setattr) ENTRY_SAME(sched_getattr) /* 335 */ ENTRY_COMP(utimes) - ENTRY_COMP(renameat2) + ENTRY_SAME(renameat2) /* Nothing yet */ diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 4c0cedf4e2c7..ce4c68a4a823 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -150,7 +150,9 @@ endif CFLAGS-$(CONFIG_TUNE_CELL) += $(call cc-option,-mtune=cell) -KBUILD_CPPFLAGS += -Iarch/$(ARCH) +asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1) + +KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr) KBUILD_AFLAGS += -Iarch/$(ARCH) KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) CPP = $(CC) -E $(KBUILD_CFLAGS) diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index cf06d42f2c03..e9d84b5d0ab6 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -57,7 +57,6 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_THERMAL=y CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 7b8abd1b88b0..9919a91add12 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -71,7 +71,6 @@ CONFIG_I2C_IBM_IIC=y CONFIG_SENSORS_AD7414=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/44x/currituck_defconfig b/arch/powerpc/configs/44x/currituck_defconfig index 4192322f8a7f..47de68261443 100644 --- a/arch/powerpc/configs/44x/currituck_defconfig +++ b/arch/powerpc/configs/44x/currituck_defconfig @@ -71,7 +71,6 @@ CONFIG_I2C_IBM_IIC=y # CONFIG_HWMON is not set CONFIG_THERMAL=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_RTC_CLASS=y diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index ca088cd581af..9622eb2a3e37 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -83,7 +83,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=m CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 4f84a0b2fbf3..0dc99e141035 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -64,7 +64,6 @@ CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 2401e2554329..1d03c35540c7 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -76,7 +76,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 21c841e0f482..ca83ec88b114 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -75,7 +75,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y CONFIG_FB_SM501=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 0b73b7f9d112..4b4a2a9133a5 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -74,7 +74,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 97ac3b993cb6..5871395573c5 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -71,7 +71,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index b4da1a7e6449..5adc4cea42d3 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -61,7 +61,6 @@ CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 291f8221d5a6..82b6b6c88d6a 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -71,7 +71,6 @@ CONFIG_SPI_BITBANG=y CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index a3bcda67d2d9..4ae385894c64 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -70,7 +70,6 @@ CONFIG_I2C_MPC=y CONFIG_WATCHDOG=y # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig index c9765b54dd1a..dc939de9b5b0 100644 --- a/arch/powerpc/configs/85xx/ge_imp3a_defconfig +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -158,7 +158,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index e5147488c000..435fd408eef1 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -86,7 +86,6 @@ CONFIG_FONTS=y CONFIG_FONT_8x16=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 07bb81df27e0..72df8ab8449e 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -125,7 +125,6 @@ CONFIG_SENSORS_LM90=y CONFIG_WATCHDOG=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_ISP1760_HCD=y diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index f51c7ebc181e..76f43df3dec7 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -123,7 +123,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig index b6d49da9c82c..8c66b13e59fc 100644 --- a/arch/powerpc/configs/amigaone_defconfig +++ b/arch/powerpc/configs/amigaone_defconfig @@ -108,7 +108,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_UHCI_HCD=y diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index c69f61620908..5e2aa43562b5 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -261,7 +261,6 @@ CONFIG_USBPCWATCHDOG=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 22a403d78d34..4bee1a6d41d0 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -179,7 +179,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HID=m # CONFIG_USB_HID is not set CONFIG_USB=m -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig index 895449ed971e..6d7b22f41b50 100644 --- a/arch/powerpc/configs/celleb_defconfig +++ b/arch/powerpc/configs/celleb_defconfig @@ -87,7 +87,6 @@ CONFIG_WATCHDOG=y # CONFIG_VGA_CONSOLE is not set CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index b20554efddcc..db5b30857e1c 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -111,7 +111,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 1ea22fc24ea8..3c72fa615bd9 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -175,7 +175,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 353435256f4c..b5e684640fdf 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -111,7 +111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HID=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 2a5afac29861..95e545d9f25c 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -79,7 +79,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 8b682d1cf4d6..530601e8ccfe 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -113,7 +113,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index a1cc8179e9fd..35595ea74ff4 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -126,7 +126,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index a73626b09051..553e66278010 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -279,7 +279,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_HID_TOPSEED=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 175a8b99c196..c91066944842 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -964,9 +964,7 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index ba39c785445d..60ad2c08caa6 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -72,7 +72,6 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index e3b1d41c89be..28992d012926 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -8,6 +8,7 @@ #ifdef __KERNEL__ #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } @@ -270,11 +271,6 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) } #define atomic_dec_if_positive atomic_dec_if_positive -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #ifdef __powerpc64__ #define ATOMIC64_INIT(i) { (i) } diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h index f89da808ce31..bab79a110c7b 100644 --- a/arch/powerpc/include/asm/barrier.h +++ b/arch/powerpc/include/asm/barrier.h @@ -84,4 +84,7 @@ do { \ ___p1; \ }) +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() smp_mb() + #endif /* _ASM_POWERPC_BARRIER_H */ diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index a5e9a7d494d8..bd3bd573d0ae 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -51,11 +51,7 @@ #define PPC_BIT(bit) (1UL << PPC_BITLSHIFT(bit)) #define PPC_BITMASK(bs, be) ((PPC_BIT(bs) - PPC_BIT(be)) | PPC_BIT(bs)) -/* - * clear_bit doesn't imply a memory barrier - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() +#include <asm/barrier.h> /* Macro for generating the ***_bits() functions */ #define DEFINE_BITOP(fn, op, prefix) \ diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h index acd491dbd45a..93a68b28e695 100644 --- a/arch/powerpc/include/asm/dcr-mmio.h +++ b/arch/powerpc/include/asm/dcr-mmio.h @@ -51,10 +51,6 @@ static inline void dcr_write_mmio(dcr_host_mmio_t host, out_be32(host.token + ((host.base + dcr_n) * host.stride), value); } -extern u64 of_translate_dcr_address(struct device_node *dev, - unsigned int dcr_n, - unsigned int *stride); - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_MMIO_H */ diff --git a/arch/powerpc/include/asm/disassemble.h b/arch/powerpc/include/asm/disassemble.h index 856f8deb557a..6330a61b875a 100644 --- a/arch/powerpc/include/asm/disassemble.h +++ b/arch/powerpc/include/asm/disassemble.h @@ -81,4 +81,38 @@ static inline unsigned int get_oc(u32 inst) { return (inst >> 11) & 0x7fff; } + +#define IS_XFORM(inst) (get_op(inst) == 31) +#define IS_DSFORM(inst) (get_op(inst) >= 56) + +/* + * Create a DSISR value from the instruction + */ +static inline unsigned make_dsisr(unsigned instr) +{ + unsigned dsisr; + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; + } + + return dsisr; +} #endif /* __ASM_PPC_DISASSEMBLE_H__ */ diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index 19eb74a95b59..9601741080e5 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -102,6 +102,7 @@ #define BOOK3S_INTERRUPT_PERFMON 0xf00 #define BOOK3S_INTERRUPT_ALTIVEC 0xf20 #define BOOK3S_INTERRUPT_VSX 0xf40 +#define BOOK3S_INTERRUPT_FAC_UNAVAIL 0xf60 #define BOOK3S_INTERRUPT_H_FAC_UNAVAIL 0xf80 #define BOOK3S_IRQPRIO_SYSTEM_RESET 0 @@ -114,14 +115,15 @@ #define BOOK3S_IRQPRIO_FP_UNAVAIL 7 #define BOOK3S_IRQPRIO_ALTIVEC 8 #define BOOK3S_IRQPRIO_VSX 9 -#define BOOK3S_IRQPRIO_SYSCALL 10 -#define BOOK3S_IRQPRIO_MACHINE_CHECK 11 -#define BOOK3S_IRQPRIO_DEBUG 12 -#define BOOK3S_IRQPRIO_EXTERNAL 13 -#define BOOK3S_IRQPRIO_DECREMENTER 14 -#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 15 -#define BOOK3S_IRQPRIO_EXTERNAL_LEVEL 16 -#define BOOK3S_IRQPRIO_MAX 17 +#define BOOK3S_IRQPRIO_FAC_UNAVAIL 10 +#define BOOK3S_IRQPRIO_SYSCALL 11 +#define BOOK3S_IRQPRIO_MACHINE_CHECK 12 +#define BOOK3S_IRQPRIO_DEBUG 13 +#define BOOK3S_IRQPRIO_EXTERNAL 14 +#define BOOK3S_IRQPRIO_DECREMENTER 15 +#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 16 +#define BOOK3S_IRQPRIO_EXTERNAL_LEVEL 17 +#define BOOK3S_IRQPRIO_MAX 18 #define BOOK3S_HFLAG_DCBZ32 0x1 #define BOOK3S_HFLAG_SLB 0x2 diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h index bb1e38a23ac7..f52f65694527 100644 --- a/arch/powerpc/include/asm/kvm_book3s.h +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -268,9 +268,10 @@ static inline ulong kvmppc_get_pc(struct kvm_vcpu *vcpu) return vcpu->arch.pc; } +static inline u64 kvmppc_get_msr(struct kvm_vcpu *vcpu); static inline bool kvmppc_need_byteswap(struct kvm_vcpu *vcpu) { - return (vcpu->arch.shared->msr & MSR_LE) != (MSR_KERNEL & MSR_LE); + return (kvmppc_get_msr(vcpu) & MSR_LE) != (MSR_KERNEL & MSR_LE); } static inline u32 kvmppc_get_last_inst_internal(struct kvm_vcpu *vcpu, ulong pc) diff --git a/arch/powerpc/include/asm/kvm_book3s_64.h b/arch/powerpc/include/asm/kvm_book3s_64.h index 51388befeddb..fddb72b48ce9 100644 --- a/arch/powerpc/include/asm/kvm_book3s_64.h +++ b/arch/powerpc/include/asm/kvm_book3s_64.h @@ -77,34 +77,122 @@ static inline long try_lock_hpte(unsigned long *hpte, unsigned long bits) return old == 0; } +static inline int __hpte_actual_psize(unsigned int lp, int psize) +{ + int i, shift; + unsigned int mask; + + /* start from 1 ignoring MMU_PAGE_4K */ + for (i = 1; i < MMU_PAGE_COUNT; i++) { + + /* invalid penc */ + if (mmu_psize_defs[psize].penc[i] == -1) + continue; + /* + * encoding bits per actual page size + * PTE LP actual page size + * rrrr rrrz >=8KB + * rrrr rrzz >=16KB + * rrrr rzzz >=32KB + * rrrr zzzz >=64KB + * ....... + */ + shift = mmu_psize_defs[i].shift - LP_SHIFT; + if (shift > LP_BITS) + shift = LP_BITS; + mask = (1 << shift) - 1; + if ((lp & mask) == mmu_psize_defs[psize].penc[i]) + return i; + } + return -1; +} + static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, unsigned long pte_index) { - unsigned long rb, va_low; + int b_psize, a_psize; + unsigned int penc; + unsigned long rb = 0, va_low, sllp; + unsigned int lp = (r >> LP_SHIFT) & ((1 << LP_BITS) - 1); + + if (!(v & HPTE_V_LARGE)) { + /* both base and actual psize is 4k */ + b_psize = MMU_PAGE_4K; + a_psize = MMU_PAGE_4K; + } else { + for (b_psize = 0; b_psize < MMU_PAGE_COUNT; b_psize++) { + + /* valid entries have a shift value */ + if (!mmu_psize_defs[b_psize].shift) + continue; + a_psize = __hpte_actual_psize(lp, b_psize); + if (a_psize != -1) + break; + } + } + /* + * Ignore the top 14 bits of va + * v have top two bits covering segment size, hence move + * by 16 bits, Also clear the lower HPTE_V_AVPN_SHIFT (7) bits. + * AVA field in v also have the lower 23 bits ignored. + * For base page size 4K we need 14 .. 65 bits (so need to + * collect extra 11 bits) + * For others we need 14..14+i + */ + /* This covers 14..54 bits of va*/ rb = (v & ~0x7fUL) << 16; /* AVA field */ + /* + * AVA in v had cleared lower 23 bits. We need to derive + * that from pteg index + */ va_low = pte_index >> 3; if (v & HPTE_V_SECONDARY) va_low = ~va_low; - /* xor vsid from AVA */ + /* + * get the vpn bits from va_low using reverse of hashing. + * In v we have va with 23 bits dropped and then left shifted + * HPTE_V_AVPN_SHIFT (7) bits. Now to find vsid we need + * right shift it with (SID_SHIFT - (23 - 7)) + */ if (!(v & HPTE_V_1TB_SEG)) - va_low ^= v >> 12; + va_low ^= v >> (SID_SHIFT - 16); else - va_low ^= v >> 24; + va_low ^= v >> (SID_SHIFT_1T - 16); va_low &= 0x7ff; - if (v & HPTE_V_LARGE) { - rb |= 1; /* L field */ - if (cpu_has_feature(CPU_FTR_ARCH_206) && - (r & 0xff000)) { - /* non-16MB large page, must be 64k */ - /* (masks depend on page size) */ - rb |= 0x1000; /* page encoding in LP field */ - rb |= (va_low & 0x7f) << 16; /* 7b of VA in AVA/LP field */ - rb |= ((va_low << 4) & 0xf0); /* AVAL field (P7 doesn't seem to care) */ - } - } else { - /* 4kB page */ - rb |= (va_low & 0x7ff) << 12; /* remaining 11b of VA */ + + switch (b_psize) { + case MMU_PAGE_4K: + sllp = ((mmu_psize_defs[a_psize].sllp & SLB_VSID_L) >> 6) | + ((mmu_psize_defs[a_psize].sllp & SLB_VSID_LP) >> 4); + rb |= sllp << 5; /* AP field */ + rb |= (va_low & 0x7ff) << 12; /* remaining 11 bits of AVA */ + break; + default: + { + int aval_shift; + /* + * remaining 7bits of AVA/LP fields + * Also contain the rr bits of LP + */ + rb |= (va_low & 0x7f) << 16; + /* + * Now clear not needed LP bits based on actual psize + */ + rb &= ~((1ul << mmu_psize_defs[a_psize].shift) - 1); + /* + * AVAL field 58..77 - base_page_shift bits of va + * we have space for 58..64 bits, Missing bits should + * be zero filled. +1 is to take care of L bit shift + */ + aval_shift = 64 - (77 - mmu_psize_defs[b_psize].shift) + 1; + rb |= ((va_low << aval_shift) & 0xfe); + + rb |= 1; /* L field */ + penc = mmu_psize_defs[b_psize].penc[a_psize]; + rb |= penc << 12; /* LP field */ + break; + } } rb |= (v >> 54) & 0x300; /* B field */ return rb; @@ -112,14 +200,26 @@ static inline unsigned long compute_tlbie_rb(unsigned long v, unsigned long r, static inline unsigned long hpte_page_size(unsigned long h, unsigned long l) { + int size, a_psize; + /* Look at the 8 bit LP value */ + unsigned int lp = (l >> LP_SHIFT) & ((1 << LP_BITS) - 1); + /* only handle 4k, 64k and 16M pages for now */ if (!(h & HPTE_V_LARGE)) - return 1ul << 12; /* 4k page */ - if ((l & 0xf000) == 0x1000 && cpu_has_feature(CPU_FTR_ARCH_206)) - return 1ul << 16; /* 64k page */ - if ((l & 0xff000) == 0) - return 1ul << 24; /* 16M page */ - return 0; /* error */ + return 1ul << 12; + else { + for (size = 0; size < MMU_PAGE_COUNT; size++) { + /* valid entries have a shift value */ + if (!mmu_psize_defs[size].shift) + continue; + + a_psize = __hpte_actual_psize(lp, size); + if (a_psize != -1) + return 1ul << mmu_psize_defs[a_psize].shift; + } + + } + return 0; } static inline unsigned long hpte_rpn(unsigned long ptel, unsigned long psize) diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h index 821725c1bf46..5bdfb5dd3400 100644 --- a/arch/powerpc/include/asm/kvm_book3s_asm.h +++ b/arch/powerpc/include/asm/kvm_book3s_asm.h @@ -104,6 +104,7 @@ struct kvmppc_host_state { #ifdef CONFIG_PPC_BOOK3S_64 u64 cfar; u64 ppr; + u64 host_fscr; #endif }; @@ -133,6 +134,7 @@ struct kvmppc_book3s_shadow_vcpu { u64 esid; u64 vsid; } slb[64]; /* guest SLB */ + u64 shadow_fscr; #endif }; diff --git a/arch/powerpc/include/asm/kvm_booke.h b/arch/powerpc/include/asm/kvm_booke.h index 80d46b5a7efb..c7aed6105ff9 100644 --- a/arch/powerpc/include/asm/kvm_booke.h +++ b/arch/powerpc/include/asm/kvm_booke.h @@ -108,9 +108,4 @@ static inline ulong kvmppc_get_fault_dar(struct kvm_vcpu *vcpu) { return vcpu->arch.fault_dear; } - -static inline ulong kvmppc_get_msr(struct kvm_vcpu *vcpu) -{ - return vcpu->arch.shared->msr; -} #endif /* __ASM_KVM_BOOKE_H__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 1eaea2dea174..bb66d8b8efdf 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -449,7 +449,9 @@ struct kvm_vcpu_arch { ulong pc; ulong ctr; ulong lr; +#ifdef CONFIG_PPC_BOOK3S ulong tar; +#endif ulong xer; u32 cr; @@ -475,6 +477,7 @@ struct kvm_vcpu_arch { ulong ppr; ulong pspb; ulong fscr; + ulong shadow_fscr; ulong ebbhr; ulong ebbrr; ulong bescr; @@ -562,6 +565,7 @@ struct kvm_vcpu_arch { #ifdef CONFIG_PPC_BOOK3S ulong fault_dar; u32 fault_dsisr; + unsigned long intr_msr; #endif #ifdef CONFIG_BOOKE @@ -622,8 +626,12 @@ struct kvm_vcpu_arch { wait_queue_head_t cpu_run; struct kvm_vcpu_arch_shared *shared; +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + bool shared_big_endian; +#endif unsigned long magic_page_pa; /* phys addr to map the magic page to */ unsigned long magic_page_ea; /* effect. addr to map the magic page to */ + bool disable_kernel_nx; int irq_type; /* one of KVM_IRQ_* */ int irq_cpu_id; @@ -654,7 +662,6 @@ struct kvm_vcpu_arch { spinlock_t tbacct_lock; u64 busy_stolen; u64 busy_preempt; - unsigned long intr_msr; #endif }; diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 4096f16502a9..4a7cc453be0b 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -449,6 +449,84 @@ static inline void kvmppc_mmu_flush_icache(pfn_t pfn) } /* + * Shared struct helpers. The shared struct can be little or big endian, + * depending on the guest endianness. So expose helpers to all of them. + */ +static inline bool kvmppc_shared_big_endian(struct kvm_vcpu *vcpu) +{ +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + /* Only Book3S_64 PR supports bi-endian for now */ + return vcpu->arch.shared_big_endian; +#elif defined(CONFIG_PPC_BOOK3S_64) && defined(__LITTLE_ENDIAN__) + /* Book3s_64 HV on little endian is always little endian */ + return false; +#else + return true; +#endif +} + +#define SHARED_WRAPPER_GET(reg, size) \ +static inline u##size kvmppc_get_##reg(struct kvm_vcpu *vcpu) \ +{ \ + if (kvmppc_shared_big_endian(vcpu)) \ + return be##size##_to_cpu(vcpu->arch.shared->reg); \ + else \ + return le##size##_to_cpu(vcpu->arch.shared->reg); \ +} \ + +#define SHARED_WRAPPER_SET(reg, size) \ +static inline void kvmppc_set_##reg(struct kvm_vcpu *vcpu, u##size val) \ +{ \ + if (kvmppc_shared_big_endian(vcpu)) \ + vcpu->arch.shared->reg = cpu_to_be##size(val); \ + else \ + vcpu->arch.shared->reg = cpu_to_le##size(val); \ +} \ + +#define SHARED_WRAPPER(reg, size) \ + SHARED_WRAPPER_GET(reg, size) \ + SHARED_WRAPPER_SET(reg, size) \ + +SHARED_WRAPPER(critical, 64) +SHARED_WRAPPER(sprg0, 64) +SHARED_WRAPPER(sprg1, 64) +SHARED_WRAPPER(sprg2, 64) +SHARED_WRAPPER(sprg3, 64) +SHARED_WRAPPER(srr0, 64) +SHARED_WRAPPER(srr1, 64) +SHARED_WRAPPER(dar, 64) +SHARED_WRAPPER_GET(msr, 64) +static inline void kvmppc_set_msr_fast(struct kvm_vcpu *vcpu, u64 val) +{ + if (kvmppc_shared_big_endian(vcpu)) + vcpu->arch.shared->msr = cpu_to_be64(val); + else + vcpu->arch.shared->msr = cpu_to_le64(val); +} +SHARED_WRAPPER(dsisr, 32) +SHARED_WRAPPER(int_pending, 32) +SHARED_WRAPPER(sprg4, 64) +SHARED_WRAPPER(sprg5, 64) +SHARED_WRAPPER(sprg6, 64) +SHARED_WRAPPER(sprg7, 64) + +static inline u32 kvmppc_get_sr(struct kvm_vcpu *vcpu, int nr) +{ + if (kvmppc_shared_big_endian(vcpu)) + return be32_to_cpu(vcpu->arch.shared->sr[nr]); + else + return le32_to_cpu(vcpu->arch.shared->sr[nr]); +} + +static inline void kvmppc_set_sr(struct kvm_vcpu *vcpu, int nr, u32 val) +{ + if (kvmppc_shared_big_endian(vcpu)) + vcpu->arch.shared->sr[nr] = cpu_to_be32(val); + else + vcpu->arch.shared->sr[nr] = cpu_to_le32(val); +} + +/* * Please call after prepare_to_enter. This function puts the lazy ee and irq * disabled tracking state back to normal mode, without actually enabling * interrupts. @@ -485,7 +563,7 @@ static inline ulong kvmppc_get_ea_indexed(struct kvm_vcpu *vcpu, int ra, int rb) msr_64bit = MSR_SF; #endif - if (!(vcpu->arch.shared->msr & msr_64bit)) + if (!(kvmppc_get_msr(vcpu) & msr_64bit)) ea = (uint32_t)ea; return ea; diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 95145a15c708..1b0739bc14b5 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -46,11 +46,6 @@ struct pci_dev; #define pcibios_assign_all_busses() \ (pci_has_flag(PCI_REASSIGN_ALL_BUS)) -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) { diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 3ebb188c3ff5..d98c1ecc3266 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -44,6 +44,12 @@ static inline int pte_present(pte_t pte) return pte_val(pte) & (_PAGE_PRESENT | _PAGE_NUMA); } +#define pte_present_nonuma pte_present_nonuma +static inline int pte_present_nonuma(pte_t pte) +{ + return pte_val(pte) & (_PAGE_PRESENT); +} + #define pte_numa pte_numa static inline int pte_numa(pte_t pte) { diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 6586a40a46ce..cded7c1278ef 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -318,11 +318,16 @@ n: addi reg,reg,(name - 0b)@l; #ifdef __powerpc64__ +#ifdef HAVE_AS_ATHIGH +#define __AS_ATHIGH high +#else +#define __AS_ATHIGH h +#endif #define LOAD_REG_IMMEDIATE(reg,expr) \ lis reg,(expr)@highest; \ ori reg,reg,(expr)@higher; \ rldicr reg,reg,32,31; \ - oris reg,reg,(expr)@h; \ + oris reg,reg,(expr)@__AS_ATHIGH; \ ori reg,reg,(expr)@l; #define LOAD_REG_ADDR(reg,name) \ diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index d977b9b78696..74b79f07f041 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -26,6 +26,45 @@ #include <linux/of_irq.h> #include <linux/platform_device.h> +#define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ +#define OF_DT_END_NODE 0x2 /* End node */ +#define OF_DT_PROP 0x3 /* Property: name off, size, + * content */ +#define OF_DT_NOP 0x4 /* nop */ +#define OF_DT_END 0x9 + +#define OF_DT_VERSION 0x10 + +/* + * This is what gets passed to the kernel by prom_init or kexec + * + * The dt struct contains the device tree structure, full pathes and + * property contents. The dt strings contain a separate block with just + * the strings for the property names, and is fully page aligned and + * self contained in a page, so that it can be kept around by the kernel, + * each property name appears only once in this page (cheap compression) + * + * the mem_rsvmap contains a map of reserved ranges of physical memory, + * passing it here instead of in the device-tree itself greatly simplifies + * the job of everybody. It's just a list of u64 pairs (base/size) that + * ends when size is 0 + */ +struct boot_param_header { + __be32 magic; /* magic word OF_DT_HEADER */ + __be32 totalsize; /* total size of DT block */ + __be32 off_dt_struct; /* offset to structure */ + __be32 off_dt_strings; /* offset to strings */ + __be32 off_mem_rsvmap; /* offset to memory reserve map */ + __be32 version; /* format version */ + __be32 last_comp_version; /* last compatible version */ + /* version 2 fields below */ + __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ + /* version 3 fields below */ + __be32 dt_strings_size; /* size of the DT strings block */ + /* version 17 fields below */ + __be32 dt_struct_size; /* size of the DT structure block */ +}; + /* * OF address retreival & translation */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index e5d2e0bc7e03..4852bcf270f3 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -670,18 +670,20 @@ #define MMCR0_PROBLEM_DISABLE MMCR0_FCP #define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */ #define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */ -#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */ -#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */ +#define MMCR0_PMXE ASM_CONST(0x04000000) /* perf mon exception enable */ +#define MMCR0_FCECE ASM_CONST(0x02000000) /* freeze ctrs on enabled cond or event */ #define MMCR0_TBEE 0x00400000UL /* time base exception enable */ #define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */ #define MMCR0_EBE 0x00100000UL /* Event based branch enable */ #define MMCR0_PMCC 0x000c0000UL /* PMC control */ #define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */ #define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/ -#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/ +#define MMCR0_PMCjCE ASM_CONST(0x00004000) /* PMCj count enable*/ #define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */ -#define MMCR0_PMAO_SYNC 0x00000800UL /* PMU interrupt is synchronous */ -#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */ +#define MMCR0_PMAO_SYNC ASM_CONST(0x00000800) /* PMU intr is synchronous */ +#define MMCR0_C56RUN ASM_CONST(0x00000100) /* PMC5/6 count when RUN=0 */ +/* performance monitor alert has occurred, set to 0 after handling exception */ +#define MMCR0_PMAO ASM_CONST(0x00000080) #define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */ #define MMCR0_FC56 0x00000010UL /* freeze counters 5 and 6 */ #define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 163c3b05a76e..464f1089b532 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -583,6 +583,7 @@ /* Bit definitions for L1CSR0. */ #define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ +#define L1CSR0_CUL 0x00000400 /* Data Cache Unable to Lock */ #define L1CSR0_CLFC 0x00000100 /* Cache Lock Bits Flash Clear */ #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ #define L1CSR0_CFI 0x00000002 /* Cache Flash Invalidate */ diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index d0e784e0ff48..521790330672 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -39,6 +39,17 @@ static inline int overlaps_kernel_text(unsigned long start, unsigned long end) (unsigned long)_stext < end; } +static inline int overlaps_kvm_tmp(unsigned long start, unsigned long end) +{ +#ifdef CONFIG_KVM_GUEST + extern char kvm_tmp[]; + return start < (unsigned long)kvm_tmp && + (unsigned long)&kvm_tmp[1024 * 1024] < end; +#else + return 0; +#endif +} + #undef dereference_function_descriptor static inline void *dereference_function_descriptor(void *ptr) { diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 3ddf70276706..ea4dc3a89c1f 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -361,3 +361,4 @@ SYSCALL(finit_module) SYSCALL(ni_syscall) /* sys_kcmp */ SYSCALL_SPU(sched_setattr) SYSCALL_SPU(sched_getattr) +SYSCALL_SPU(renameat2) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index c9202151079f..6c8a8c5a37a1 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -9,12 +9,8 @@ struct device_node; #ifdef CONFIG_NUMA /* - * Before going off node we want the VM to try and reclaim from the local - * node. It does this if the remote distance is larger than RECLAIM_DISTANCE. - * With the default REMOTE_DISTANCE of 20 and the default RECLAIM_DISTANCE of - * 20, we never reclaim and go off node straight away. - * - * To fix this we choose a smaller value of RECLAIM_DISTANCE. + * If zone_reclaim_mode is enabled, a RECLAIM_DISTANCE of 10 will mean that + * all zones on all nodes will be eligible for zone_reclaim(). */ #define RECLAIM_DISTANCE 10 diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 4494f029b632..5ce5552ab9f5 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -12,7 +12,7 @@ #include <uapi/asm/unistd.h> -#define __NR_syscalls 357 +#define __NR_syscalls 358 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls @@ -29,7 +29,6 @@ #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h index a6665be4f3ab..2bc4a9409a93 100644 --- a/arch/powerpc/include/uapi/asm/kvm.h +++ b/arch/powerpc/include/uapi/asm/kvm.h @@ -545,7 +545,6 @@ struct kvm_get_htab_header { #define KVM_REG_PPC_TCSCR (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb1) #define KVM_REG_PPC_PID (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb2) #define KVM_REG_PPC_ACOP (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb3) -#define KVM_REG_PPC_WORT (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb4) #define KVM_REG_PPC_VRSAVE (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb4) #define KVM_REG_PPC_LPCR (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb5) @@ -555,6 +554,7 @@ struct kvm_get_htab_header { #define KVM_REG_PPC_ARCH_COMPAT (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb7) #define KVM_REG_PPC_DABRX (KVM_REG_PPC | KVM_REG_SIZE_U32 | 0xb8) +#define KVM_REG_PPC_WORT (KVM_REG_PPC | KVM_REG_SIZE_U64 | 0xb9) /* Transactional Memory checkpointed state: * This is all GPRs, all VSX regs and a subset of SPRs diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h index e3af3286a068..91e42f09b323 100644 --- a/arch/powerpc/include/uapi/asm/kvm_para.h +++ b/arch/powerpc/include/uapi/asm/kvm_para.h @@ -82,10 +82,16 @@ struct kvm_vcpu_arch_shared { #define KVM_FEATURE_MAGIC_PAGE 1 +/* Magic page flags from host to guest */ + #define KVM_MAGIC_FEAT_SR (1 << 0) /* MASn, ESR, PIR, and high SPRGs */ #define KVM_MAGIC_FEAT_MAS0_TO_SPRG7 (1 << 1) +/* Magic page flags from guest to host */ + +#define MAGIC_PAGE_FLAG_NOT_MAPPED_NX (1 << 0) + #endif /* _UAPI__POWERPC_KVM_PARA_H__ */ diff --git a/arch/powerpc/include/uapi/asm/unistd.h b/arch/powerpc/include/uapi/asm/unistd.h index 881bf2e2560d..2d526f7b48da 100644 --- a/arch/powerpc/include/uapi/asm/unistd.h +++ b/arch/powerpc/include/uapi/asm/unistd.h @@ -379,5 +379,6 @@ #define __NR_kcmp 354 #define __NR_sched_setattr 355 #define __NR_sched_getattr 356 +#define __NR_renameat2 357 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index fcc9a89a4695..fab19ec25597 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -2,6 +2,7 @@ # Makefile for the linux kernel. # +CFLAGS_prom.o = -I$(src)/../../../scripts/dtc/libfdt CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 94908af308d8..34f55524d456 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -25,14 +25,13 @@ #include <asm/cputable.h> #include <asm/emulated_ops.h> #include <asm/switch_to.h> +#include <asm/disassemble.h> struct aligninfo { unsigned char len; unsigned char flags; }; -#define IS_XFORM(inst) (((inst) >> 26) == 31) -#define IS_DSFORM(inst) (((inst) >> 26) >= 56) #define INVALID { 0, 0 } @@ -192,37 +191,6 @@ static struct aligninfo aligninfo[128] = { }; /* - * Create a DSISR value from the instruction - */ -static inline unsigned make_dsisr(unsigned instr) -{ - unsigned dsisr; - - - /* bits 6:15 --> 22:31 */ - dsisr = (instr & 0x03ff0000) >> 16; - - if (IS_XFORM(instr)) { - /* bits 29:30 --> 15:16 */ - dsisr |= (instr & 0x00000006) << 14; - /* bit 25 --> 17 */ - dsisr |= (instr & 0x00000040) << 8; - /* bits 21:24 --> 18:21 */ - dsisr |= (instr & 0x00000780) << 3; - } else { - /* bit 5 --> 17 */ - dsisr |= (instr & 0x04000000) >> 12; - /* bits 1: 4 --> 18:21 */ - dsisr |= (instr & 0x78000000) >> 17; - /* bits 30:31 --> 12:13 */ - if (IS_DSFORM(instr)) - dsisr |= (instr & 0x00000003) << 18; - } - - return dsisr; -} - -/* * The dcbz (data cache block zero) instruction * gives an alignment fault if used on non-cacheable * memory. We handle the fault mainly for the diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index dba8140ebc20..93e1465c8496 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -54,6 +54,7 @@ #endif #if defined(CONFIG_KVM) && defined(CONFIG_PPC_BOOK3S) #include <asm/kvm_book3s.h> +#include <asm/kvm_ppc.h> #endif #ifdef CONFIG_PPC32 @@ -445,7 +446,9 @@ int main(void) DEFINE(VCPU_XER, offsetof(struct kvm_vcpu, arch.xer)); DEFINE(VCPU_CTR, offsetof(struct kvm_vcpu, arch.ctr)); DEFINE(VCPU_LR, offsetof(struct kvm_vcpu, arch.lr)); +#ifdef CONFIG_PPC_BOOK3S DEFINE(VCPU_TAR, offsetof(struct kvm_vcpu, arch.tar)); +#endif DEFINE(VCPU_CR, offsetof(struct kvm_vcpu, arch.cr)); DEFINE(VCPU_PC, offsetof(struct kvm_vcpu, arch.pc)); #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE @@ -467,6 +470,9 @@ int main(void) DEFINE(VCPU_SHARED, offsetof(struct kvm_vcpu, arch.shared)); DEFINE(VCPU_SHARED_MSR, offsetof(struct kvm_vcpu_arch_shared, msr)); DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr)); +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + DEFINE(VCPU_SHAREDBE, offsetof(struct kvm_vcpu, arch.shared_big_endian)); +#endif DEFINE(VCPU_SHARED_MAS0, offsetof(struct kvm_vcpu_arch_shared, mas0)); DEFINE(VCPU_SHARED_MAS1, offsetof(struct kvm_vcpu_arch_shared, mas1)); @@ -493,7 +499,6 @@ int main(void) DEFINE(VCPU_DAR, offsetof(struct kvm_vcpu, arch.shregs.dar)); DEFINE(VCPU_VPA, offsetof(struct kvm_vcpu, arch.vpa.pinned_addr)); DEFINE(VCPU_VPA_DIRTY, offsetof(struct kvm_vcpu, arch.vpa.dirty)); - DEFINE(VCPU_INTR_MSR, offsetof(struct kvm_vcpu, arch.intr_msr)); #endif #ifdef CONFIG_PPC_BOOK3S DEFINE(VCPU_VCPUID, offsetof(struct kvm_vcpu, vcpu_id)); @@ -528,11 +533,13 @@ int main(void) DEFINE(VCPU_SLB_NR, offsetof(struct kvm_vcpu, arch.slb_nr)); DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr)); DEFINE(VCPU_FAULT_DAR, offsetof(struct kvm_vcpu, arch.fault_dar)); + DEFINE(VCPU_INTR_MSR, offsetof(struct kvm_vcpu, arch.intr_msr)); DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst)); DEFINE(VCPU_TRAP, offsetof(struct kvm_vcpu, arch.trap)); DEFINE(VCPU_CFAR, offsetof(struct kvm_vcpu, arch.cfar)); DEFINE(VCPU_PPR, offsetof(struct kvm_vcpu, arch.ppr)); DEFINE(VCPU_FSCR, offsetof(struct kvm_vcpu, arch.fscr)); + DEFINE(VCPU_SHADOW_FSCR, offsetof(struct kvm_vcpu, arch.shadow_fscr)); DEFINE(VCPU_PSPB, offsetof(struct kvm_vcpu, arch.pspb)); DEFINE(VCPU_EBBHR, offsetof(struct kvm_vcpu, arch.ebbhr)); DEFINE(VCPU_EBBRR, offsetof(struct kvm_vcpu, arch.ebbrr)); @@ -614,6 +621,7 @@ int main(void) #ifdef CONFIG_PPC64 SVCPU_FIELD(SVCPU_SLB, slb); SVCPU_FIELD(SVCPU_SLB_MAX, slb_max); + SVCPU_FIELD(SVCPU_SHADOW_FSCR, shadow_fscr); #endif HSTATE_FIELD(HSTATE_HOST_R1, host_r1); @@ -649,6 +657,7 @@ int main(void) #ifdef CONFIG_PPC_BOOK3S_64 HSTATE_FIELD(HSTATE_CFAR, cfar); HSTATE_FIELD(HSTATE_PPR, ppr); + HSTATE_FIELD(HSTATE_HOST_FSCR, host_fscr); #endif /* CONFIG_PPC_BOOK3S_64 */ #else /* CONFIG_PPC_BOOK3S */ diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 18d7c80ddeb9..51dbace3269b 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -81,7 +81,7 @@ void crash_ipi_callback(struct pt_regs *regs) } atomic_inc(&cpus_in_crash); - smp_mb__after_atomic_inc(); + smp_mb__after_atomic(); /* * Starting the kdump boot. diff --git a/arch/powerpc/kernel/epapr_paravirt.c b/arch/powerpc/kernel/epapr_paravirt.c index 7898be90f2dc..60d1a2259dbe 100644 --- a/arch/powerpc/kernel/epapr_paravirt.c +++ b/arch/powerpc/kernel/epapr_paravirt.c @@ -36,7 +36,7 @@ static int __init early_init_dt_scan_epapr(unsigned long node, int depth, void *data) { const u32 *insts; - unsigned long len; + int len; int i; insts = of_get_flat_dt_prop(node, "hcall-instructions", &len); @@ -47,9 +47,10 @@ static int __init early_init_dt_scan_epapr(unsigned long node, return -1; for (i = 0; i < (len / 4); i++) { - patch_instruction(epapr_hypercall_start + i, insts[i]); + u32 inst = be32_to_cpu(insts[i]); + patch_instruction(epapr_hypercall_start + i, inst); #if !defined(CONFIG_64BIT) || defined(CONFIG_PPC_BOOK3E_64) - patch_instruction(epapr_ev_idle_start + i, insts[i]); + patch_instruction(epapr_ev_idle_start + i, inst); #endif } diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index 2230fd0ca3e4..7213d930918d 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -55,9 +55,9 @@ int crash_mem_ranges; int __init early_init_dt_scan_fw_dump(unsigned long node, const char *uname, int depth, void *data) { - __be32 *sections; + const __be32 *sections; int i, num_sections; - unsigned long size; + int size; const int *token; if (depth != 1 || strcmp(uname, "rtas") != 0) diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 6a0175297b0d..33aa4ddf597d 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -74,7 +74,7 @@ #define KVM_INST_MTSRIN 0x7c0001e4 static bool kvm_patching_worked = true; -static char kvm_tmp[1024 * 1024]; +char kvm_tmp[1024 * 1024]; static int kvm_tmp_index; static inline void kvm_patch_ins(u32 *inst, u32 new_inst) @@ -417,7 +417,7 @@ static void kvm_map_magic_page(void *data) ulong out[8]; in[0] = KVM_MAGIC_PAGE; - in[1] = KVM_MAGIC_PAGE; + in[1] = KVM_MAGIC_PAGE | MAGIC_PAGE_FLAG_NOT_MAPPED_NX; epapr_hypercall(in, out, KVM_HCALL_TOKEN(KVM_HC_PPC_MAP_MAGIC_PAGE)); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index 59d229a2a3e0..879b3aacac32 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -237,7 +237,7 @@ static void wake_offline_cpus(void) if (!cpu_online(cpu)) { printk(KERN_INFO "kexec: Waking offline cpu %d.\n", cpu); - cpu_up(cpu); + WARN_ON(cpu_up(cpu)); } } } diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index ad302f845e5d..d6e195e8cd4c 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -98,6 +98,9 @@ static inline void free_lppacas(void) { } /* * 3 persistent SLBs are registered here. The buffer will be zero * initially, hence will all be invaild until we actually write them. + * + * If you make the number of persistent SLB entries dynamic, please also + * update PR KVM to flush and restore them accordingly. */ static struct slb_shadow *slb_shadow; diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index d9476c1fc959..24d342e91790 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -201,26 +201,6 @@ struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node) return NULL; } -static ssize_t pci_show_devspec(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); - -/* Add sysfs properties */ -int pcibios_add_platform_entries(struct pci_dev *pdev) -{ - return device_create_file(&pdev->dev, &dev_attr_devspec); -} - /* * Reads the interrupt pin to determine if interrupt is use by card. * If the interrupt is used, then gets the interrupt line from the diff --git a/arch/powerpc/kernel/pci-hotplug.c b/arch/powerpc/kernel/pci-hotplug.c index c1e17ae68a08..5b789177aa29 100644 --- a/arch/powerpc/kernel/pci-hotplug.c +++ b/arch/powerpc/kernel/pci-hotplug.c @@ -98,8 +98,7 @@ void pcibios_add_pci_devices(struct pci_bus * bus) max = bus->busn_res.start; for (pass = 0; pass < 2; pass++) { list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + if (pci_is_bridge(dev)) max = pci_scan_bridge(bus, dev, max, pass); } diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 83c26d829991..059e244484fe 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -362,8 +362,7 @@ static void __of_scan_bus(struct device_node *node, struct pci_bus *bus, /* Now scan child busses */ list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) { + if (pci_is_bridge(dev)) { of_scan_pci_bridge(dev); } } diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 668aa4791fd7..613a860a203c 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -29,11 +29,11 @@ #include <linux/bitops.h> #include <linux/export.h> #include <linux/kexec.h> -#include <linux/debugfs.h> #include <linux/irq.h> #include <linux/memblock.h> #include <linux/of.h> #include <linux/of_fdt.h> +#include <linux/libfdt.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -118,14 +118,14 @@ static void __init move_device_tree(void) DBG("-> move_device_tree\n"); start = __pa(initial_boot_params); - size = be32_to_cpu(initial_boot_params->totalsize); + size = fdt_totalsize(initial_boot_params); if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) || overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) { p = __va(memblock_alloc(size, PAGE_SIZE)); memcpy(p, initial_boot_params, size); - initial_boot_params = (struct boot_param_header *)p; + initial_boot_params = p; DBG("Moved device tree to 0x%p\n", p); } @@ -163,7 +163,7 @@ static struct ibm_pa_feature { {CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0}, }; -static void __init scan_features(unsigned long node, unsigned char *ftrs, +static void __init scan_features(unsigned long node, const unsigned char *ftrs, unsigned long tablelen, struct ibm_pa_feature *fp, unsigned long ft_size) @@ -202,8 +202,8 @@ static void __init scan_features(unsigned long node, unsigned char *ftrs, static void __init check_cpu_pa_features(unsigned long node) { - unsigned char *pa_ftrs; - unsigned long tablelen; + const unsigned char *pa_ftrs; + int tablelen; pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen); if (pa_ftrs == NULL) @@ -216,7 +216,7 @@ static void __init check_cpu_pa_features(unsigned long node) #ifdef CONFIG_PPC_STD_MMU_64 static void __init check_cpu_slb_size(unsigned long node) { - __be32 *slb_size_ptr; + const __be32 *slb_size_ptr; slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL); if (slb_size_ptr != NULL) { @@ -257,7 +257,7 @@ static struct feature_property { static inline void identical_pvr_fixup(unsigned long node) { unsigned int pvr; - char *model = of_get_flat_dt_prop(node, "model", NULL); + const char *model = of_get_flat_dt_prop(node, "model", NULL); /* * Since 440GR(x)/440EP(x) processors have the same pvr, @@ -295,11 +295,11 @@ static int __init early_init_dt_scan_cpus(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); const __be32 *prop; const __be32 *intserv; int i, nthreads; - unsigned long len; + int len; int found = -1; int found_thread = 0; @@ -325,9 +325,9 @@ static int __init early_init_dt_scan_cpus(unsigned long node, * version 2 of the kexec param format adds the phys cpuid of * booted proc. */ - if (be32_to_cpu(initial_boot_params->version) >= 2) { + if (fdt_version(initial_boot_params) >= 2) { if (be32_to_cpu(intserv[i]) == - be32_to_cpu(initial_boot_params->boot_cpuid_phys)) { + fdt_boot_cpuid_phys(initial_boot_params)) { found = boot_cpu_count; found_thread = i; } @@ -392,7 +392,7 @@ static int __init early_init_dt_scan_cpus(unsigned long node, int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname, int depth, void *data) { - unsigned long *lprop; /* All these set by kernel, so no need to convert endian */ + const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */ /* Use common scan routine to determine if this is the chosen node */ if (early_init_dt_scan_chosen(node, uname, depth, data) == 0) @@ -443,8 +443,9 @@ int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname, */ static int __init early_init_dt_scan_drconf_memory(unsigned long node) { - __be32 *dm, *ls, *usm; - unsigned long l, n, flags; + const __be32 *dm, *ls, *usm; + int l; + unsigned long n, flags; u64 base, size, memblock_size; unsigned int is_kexec_kdump = 0, rngs; @@ -564,9 +565,12 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size) static void __init early_reserve_mem_dt(void) { - unsigned long i, len, dt_root; + unsigned long i, dt_root; + int len; const __be32 *prop; + early_init_fdt_scan_reserved_mem(); + dt_root = of_get_flat_dt_root(); prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len); @@ -589,24 +593,14 @@ static void __init early_reserve_mem_dt(void) memblock_reserve(base, size); } } - - early_init_fdt_scan_reserved_mem(); } static void __init early_reserve_mem(void) { - u64 base, size; __be64 *reserve_map; - unsigned long self_base; - unsigned long self_size; reserve_map = (__be64 *)(((unsigned long)initial_boot_params) + - be32_to_cpu(initial_boot_params->off_mem_rsvmap)); - - /* before we do anything, lets reserve the dt blob */ - self_base = __pa((unsigned long)initial_boot_params); - self_size = be32_to_cpu(initial_boot_params->totalsize); - memblock_reserve(self_base, self_size); + fdt_off_mem_rsvmap(initial_boot_params)); /* Look for the new "reserved-regions" property in the DT */ early_reserve_mem_dt(); @@ -636,26 +630,12 @@ static void __init early_reserve_mem(void) size_32 = be32_to_cpup(reserve_map_32++); if (size_32 == 0) break; - /* skip if the reservation is for the blob */ - if (base_32 == self_base && size_32 == self_size) - continue; DBG("reserving: %x -> %x\n", base_32, size_32); memblock_reserve(base_32, size_32); } return; } #endif - DBG("Processing reserve map\n"); - - /* Handle the reserve map in the fdt blob if it exists */ - while (1) { - base = be64_to_cpup(reserve_map++); - size = be64_to_cpup(reserve_map++); - if (size == 0) - break; - DBG("reserving: %llx -> %llx\n", base, size); - memblock_reserve(base, size); - } } void __init early_init_devtree(void *params) @@ -922,23 +902,3 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id) { return (int)phys_id == get_hard_smp_processor_id(cpu); } - -#if defined(CONFIG_DEBUG_FS) && defined(DEBUG) -static struct debugfs_blob_wrapper flat_dt_blob; - -static int __init export_flat_device_tree(void) -{ - struct dentry *d; - - flat_dt_blob.data = initial_boot_params; - flat_dt_blob.size = be32_to_cpu(initial_boot_params->totalsize); - - d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR, - powerpc_debugfs_root, &flat_dt_blob); - if (!d) - return 1; - - return 0; -} -__initcall(export_flat_device_tree); -#endif diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 8cd5ed049b5d..8b4c857c1421 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -1142,7 +1142,7 @@ void __init rtas_initialize(void) int __init early_init_dt_scan_rtas(unsigned long node, const char *uname, int depth, void *data) { - u32 *basep, *entryp, *sizep; + const u32 *basep, *entryp, *sizep; if (depth != 1 || strcmp(uname, "rtas") != 0) return 0; diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index e2a4232c5871..10ffffef0414 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -766,6 +766,28 @@ int setup_profiling_timer(unsigned int multiplier) return 0; } +#ifdef CONFIG_SCHED_SMT +/* cpumask of CPUs with asymetric SMT dependancy */ +static const int powerpc_smt_flags(void) +{ + int flags = SD_SHARE_CPUPOWER | SD_SHARE_PKG_RESOURCES; + + if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { + printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); + flags |= SD_ASYM_PACKING; + } + return flags; +} +#endif + +static struct sched_domain_topology_level powerpc_topology[] = { +#ifdef CONFIG_SCHED_SMT + { cpu_smt_mask, powerpc_smt_flags, SD_INIT_NAME(SMT) }, +#endif + { cpu_cpu_mask, SD_INIT_NAME(DIE) }, + { NULL, }, +}; + void __init smp_cpus_done(unsigned int max_cpus) { cpumask_var_t old_mask; @@ -790,15 +812,8 @@ void __init smp_cpus_done(unsigned int max_cpus) dump_numa_cpu_topology(); -} + set_sched_topology(powerpc_topology); -int arch_sd_sibling_asym_packing(void) -{ - if (cpu_has_feature(CPU_FTR_ASYM_SMT)) { - printk_once(KERN_INFO "Enabling Asymmetric SMT scheduling\n"); - return SD_ASYM_PACKING; - } - return 0; } #ifdef CONFIG_HOTPLUG_CPU diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index 141b2027189a..d6a53b95de94 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -6,7 +6,6 @@ source "virt/kvm/Kconfig" menuconfig VIRTUALIZATION bool "Virtualization" - depends on !CPU_LITTLE_ENDIAN ---help--- Say Y here to get to see options for using your Linux host to run other operating systems inside virtual machines (guests). @@ -76,6 +75,7 @@ config KVM_BOOK3S_64 config KVM_BOOK3S_64_HV tristate "KVM support for POWER7 and PPC970 using hypervisor mode in host" depends on KVM_BOOK3S_64 + depends on !CPU_LITTLE_ENDIAN select KVM_BOOK3S_HV_POSSIBLE select MMU_NOTIFIER select CMA diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c index 94e597e6f15c..c254c27f240e 100644 --- a/arch/powerpc/kvm/book3s.c +++ b/arch/powerpc/kvm/book3s.c @@ -85,9 +85,9 @@ static inline void kvmppc_update_int_pending(struct kvm_vcpu *vcpu, if (is_kvmppc_hv_enabled(vcpu->kvm)) return; if (pending_now) - vcpu->arch.shared->int_pending = 1; + kvmppc_set_int_pending(vcpu, 1); else if (old_pending) - vcpu->arch.shared->int_pending = 0; + kvmppc_set_int_pending(vcpu, 0); } static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu) @@ -99,11 +99,11 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu) if (is_kvmppc_hv_enabled(vcpu->kvm)) return false; - crit_raw = vcpu->arch.shared->critical; + crit_raw = kvmppc_get_critical(vcpu); crit_r1 = kvmppc_get_gpr(vcpu, 1); /* Truncate crit indicators in 32 bit mode */ - if (!(vcpu->arch.shared->msr & MSR_SF)) { + if (!(kvmppc_get_msr(vcpu) & MSR_SF)) { crit_raw &= 0xffffffff; crit_r1 &= 0xffffffff; } @@ -111,15 +111,15 @@ static inline bool kvmppc_critical_section(struct kvm_vcpu *vcpu) /* Critical section when crit == r1 */ crit = (crit_raw == crit_r1); /* ... and we're in supervisor mode */ - crit = crit && !(vcpu->arch.shared->msr & MSR_PR); + crit = crit && !(kvmppc_get_msr(vcpu) & MSR_PR); return crit; } void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags) { - vcpu->arch.shared->srr0 = kvmppc_get_pc(vcpu); - vcpu->arch.shared->srr1 = vcpu->arch.shared->msr | flags; + kvmppc_set_srr0(vcpu, kvmppc_get_pc(vcpu)); + kvmppc_set_srr1(vcpu, kvmppc_get_msr(vcpu) | flags); kvmppc_set_pc(vcpu, kvmppc_interrupt_offset(vcpu) + vec); vcpu->arch.mmu.reset_msr(vcpu); } @@ -145,6 +145,7 @@ static int kvmppc_book3s_vec2irqprio(unsigned int vec) case 0xd00: prio = BOOK3S_IRQPRIO_DEBUG; break; case 0xf20: prio = BOOK3S_IRQPRIO_ALTIVEC; break; case 0xf40: prio = BOOK3S_IRQPRIO_VSX; break; + case 0xf60: prio = BOOK3S_IRQPRIO_FAC_UNAVAIL; break; default: prio = BOOK3S_IRQPRIO_MAX; break; } @@ -225,12 +226,12 @@ int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority) switch (priority) { case BOOK3S_IRQPRIO_DECREMENTER: - deliver = (vcpu->arch.shared->msr & MSR_EE) && !crit; + deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit; vec = BOOK3S_INTERRUPT_DECREMENTER; break; case BOOK3S_IRQPRIO_EXTERNAL: case BOOK3S_IRQPRIO_EXTERNAL_LEVEL: - deliver = (vcpu->arch.shared->msr & MSR_EE) && !crit; + deliver = (kvmppc_get_msr(vcpu) & MSR_EE) && !crit; vec = BOOK3S_INTERRUPT_EXTERNAL; break; case BOOK3S_IRQPRIO_SYSTEM_RESET: @@ -275,6 +276,9 @@ int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority) case BOOK3S_IRQPRIO_PERFORMANCE_MONITOR: vec = BOOK3S_INTERRUPT_PERFMON; break; + case BOOK3S_IRQPRIO_FAC_UNAVAIL: + vec = BOOK3S_INTERRUPT_FAC_UNAVAIL; + break; default: deliver = 0; printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority); @@ -343,7 +347,7 @@ pfn_t kvmppc_gfn_to_pfn(struct kvm_vcpu *vcpu, gfn_t gfn, bool writing, { ulong mp_pa = vcpu->arch.magic_page_pa; - if (!(vcpu->arch.shared->msr & MSR_SF)) + if (!(kvmppc_get_msr(vcpu) & MSR_SF)) mp_pa = (uint32_t)mp_pa; /* Magic page override */ @@ -367,7 +371,7 @@ EXPORT_SYMBOL_GPL(kvmppc_gfn_to_pfn); static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data, bool iswrite, struct kvmppc_pte *pte) { - int relocated = (vcpu->arch.shared->msr & (data ? MSR_DR : MSR_IR)); + int relocated = (kvmppc_get_msr(vcpu) & (data ? MSR_DR : MSR_IR)); int r; if (relocated) { @@ -498,18 +502,18 @@ int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) regs->ctr = kvmppc_get_ctr(vcpu); regs->lr = kvmppc_get_lr(vcpu); regs->xer = kvmppc_get_xer(vcpu); - regs->msr = vcpu->arch.shared->msr; - regs->srr0 = vcpu->arch.shared->srr0; - regs->srr1 = vcpu->arch.shared->srr1; + regs->msr = kvmppc_get_msr(vcpu); + regs->srr0 = kvmppc_get_srr0(vcpu); + regs->srr1 = kvmppc_get_srr1(vcpu); regs->pid = vcpu->arch.pid; - regs->sprg0 = vcpu->arch.shared->sprg0; - regs->sprg1 = vcpu->arch.shared->sprg1; - regs->sprg2 = vcpu->arch.shared->sprg2; - regs->sprg3 = vcpu->arch.shared->sprg3; - regs->sprg4 = vcpu->arch.shared->sprg4; - regs->sprg5 = vcpu->arch.shared->sprg5; - regs->sprg6 = vcpu->arch.shared->sprg6; - regs->sprg7 = vcpu->arch.shared->sprg7; + regs->sprg0 = kvmppc_get_sprg0(vcpu); + regs->sprg1 = kvmppc_get_sprg1(vcpu); + regs->sprg2 = kvmppc_get_sprg2(vcpu); + regs->sprg3 = kvmppc_get_sprg3(vcpu); + regs->sprg4 = kvmppc_get_sprg4(vcpu); + regs->sprg5 = kvmppc_get_sprg5(vcpu); + regs->sprg6 = kvmppc_get_sprg6(vcpu); + regs->sprg7 = kvmppc_get_sprg7(vcpu); for (i = 0; i < ARRAY_SIZE(regs->gpr); i++) regs->gpr[i] = kvmppc_get_gpr(vcpu, i); @@ -527,16 +531,16 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) kvmppc_set_lr(vcpu, regs->lr); kvmppc_set_xer(vcpu, regs->xer); kvmppc_set_msr(vcpu, regs->msr); - vcpu->arch.shared->srr0 = regs->srr0; - vcpu->arch.shared->srr1 = regs->srr1; - vcpu->arch.shared->sprg0 = regs->sprg0; - vcpu->arch.shared->sprg1 = regs->sprg1; - vcpu->arch.shared->sprg2 = regs->sprg2; - vcpu->arch.shared->sprg3 = regs->sprg3; - vcpu->arch.shared->sprg4 = regs->sprg4; - vcpu->arch.shared->sprg5 = regs->sprg5; - vcpu->arch.shared->sprg6 = regs->sprg6; - vcpu->arch.shared->sprg7 = regs->sprg7; + kvmppc_set_srr0(vcpu, regs->srr0); + kvmppc_set_srr1(vcpu, regs->srr1); + kvmppc_set_sprg0(vcpu, regs->sprg0); + kvmppc_set_sprg1(vcpu, regs->sprg1); + kvmppc_set_sprg2(vcpu, regs->sprg2); + kvmppc_set_sprg3(vcpu, regs->sprg3); + kvmppc_set_sprg4(vcpu, regs->sprg4); + kvmppc_set_sprg5(vcpu, regs->sprg5); + kvmppc_set_sprg6(vcpu, regs->sprg6); + kvmppc_set_sprg7(vcpu, regs->sprg7); for (i = 0; i < ARRAY_SIZE(regs->gpr); i++) kvmppc_set_gpr(vcpu, i, regs->gpr[i]); @@ -570,10 +574,10 @@ int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) r = 0; switch (reg->id) { case KVM_REG_PPC_DAR: - val = get_reg_val(reg->id, vcpu->arch.shared->dar); + val = get_reg_val(reg->id, kvmppc_get_dar(vcpu)); break; case KVM_REG_PPC_DSISR: - val = get_reg_val(reg->id, vcpu->arch.shared->dsisr); + val = get_reg_val(reg->id, kvmppc_get_dsisr(vcpu)); break; case KVM_REG_PPC_FPR0 ... KVM_REG_PPC_FPR31: i = reg->id - KVM_REG_PPC_FPR0; @@ -627,6 +631,21 @@ int kvm_vcpu_ioctl_get_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) val = get_reg_val(reg->id, kvmppc_xics_get_icp(vcpu)); break; #endif /* CONFIG_KVM_XICS */ + case KVM_REG_PPC_FSCR: + val = get_reg_val(reg->id, vcpu->arch.fscr); + break; + case KVM_REG_PPC_TAR: + val = get_reg_val(reg->id, vcpu->arch.tar); + break; + case KVM_REG_PPC_EBBHR: + val = get_reg_val(reg->id, vcpu->arch.ebbhr); + break; + case KVM_REG_PPC_EBBRR: + val = get_reg_val(reg->id, vcpu->arch.ebbrr); + break; + case KVM_REG_PPC_BESCR: + val = get_reg_val(reg->id, vcpu->arch.bescr); + break; default: r = -EINVAL; break; @@ -660,10 +679,10 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) r = 0; switch (reg->id) { case KVM_REG_PPC_DAR: - vcpu->arch.shared->dar = set_reg_val(reg->id, val); + kvmppc_set_dar(vcpu, set_reg_val(reg->id, val)); break; case KVM_REG_PPC_DSISR: - vcpu->arch.shared->dsisr = set_reg_val(reg->id, val); + kvmppc_set_dsisr(vcpu, set_reg_val(reg->id, val)); break; case KVM_REG_PPC_FPR0 ... KVM_REG_PPC_FPR31: i = reg->id - KVM_REG_PPC_FPR0; @@ -716,6 +735,21 @@ int kvm_vcpu_ioctl_set_one_reg(struct kvm_vcpu *vcpu, struct kvm_one_reg *reg) set_reg_val(reg->id, val)); break; #endif /* CONFIG_KVM_XICS */ + case KVM_REG_PPC_FSCR: + vcpu->arch.fscr = set_reg_val(reg->id, val); + break; + case KVM_REG_PPC_TAR: + vcpu->arch.tar = set_reg_val(reg->id, val); + break; + case KVM_REG_PPC_EBBHR: + vcpu->arch.ebbhr = set_reg_val(reg->id, val); + break; + case KVM_REG_PPC_EBBRR: + vcpu->arch.ebbrr = set_reg_val(reg->id, val); + break; + case KVM_REG_PPC_BESCR: + vcpu->arch.bescr = set_reg_val(reg->id, val); + break; default: r = -EINVAL; break; @@ -886,7 +920,7 @@ static int kvmppc_book3s_init(void) r = kvm_init(NULL, sizeof(struct kvm_vcpu), 0, THIS_MODULE); if (r) return r; -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER r = kvmppc_book3s_init_pr(); #endif return r; @@ -895,7 +929,7 @@ static int kvmppc_book3s_init(void) static void kvmppc_book3s_exit(void) { -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER kvmppc_book3s_exit_pr(); #endif kvm_exit(); @@ -905,7 +939,7 @@ module_init(kvmppc_book3s_init); module_exit(kvmppc_book3s_exit); /* On 32bit this is our one and only kernel module */ -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER MODULE_ALIAS_MISCDEV(KVM_MINOR); MODULE_ALIAS("devname:kvm"); #endif diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c index 76a64ce6a5b6..93503bbdae43 100644 --- a/arch/powerpc/kvm/book3s_32_mmu.c +++ b/arch/powerpc/kvm/book3s_32_mmu.c @@ -91,7 +91,7 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, static u32 find_sr(struct kvm_vcpu *vcpu, gva_t eaddr) { - return vcpu->arch.shared->sr[(eaddr >> 28) & 0xf]; + return kvmppc_get_sr(vcpu, (eaddr >> 28) & 0xf); } static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr, @@ -131,7 +131,7 @@ static hva_t kvmppc_mmu_book3s_32_get_pteg(struct kvm_vcpu *vcpu, pteg = (vcpu_book3s->sdr1 & 0xffff0000) | hash; dprintk("MMU: pc=0x%lx eaddr=0x%lx sdr1=0x%llx pteg=0x%x vsid=0x%x\n", - kvmppc_get_pc(&vcpu_book3s->vcpu), eaddr, vcpu_book3s->sdr1, pteg, + kvmppc_get_pc(vcpu), eaddr, vcpu_book3s->sdr1, pteg, sr_vsid(sre)); r = gfn_to_hva(vcpu->kvm, pteg >> PAGE_SHIFT); @@ -160,7 +160,7 @@ static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr, else bat = &vcpu_book3s->ibat[i]; - if (vcpu->arch.shared->msr & MSR_PR) { + if (kvmppc_get_msr(vcpu) & MSR_PR) { if (!bat->vp) continue; } else { @@ -208,6 +208,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, u32 sre; hva_t ptegp; u32 pteg[16]; + u32 pte0, pte1; u32 ptem = 0; int i; int found = 0; @@ -233,14 +234,16 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, } for (i=0; i<16; i+=2) { - if (ptem == pteg[i]) { + pte0 = be32_to_cpu(pteg[i]); + pte1 = be32_to_cpu(pteg[i + 1]); + if (ptem == pte0) { u8 pp; - pte->raddr = (pteg[i+1] & ~(0xFFFULL)) | (eaddr & 0xFFF); - pp = pteg[i+1] & 3; + pte->raddr = (pte1 & ~(0xFFFULL)) | (eaddr & 0xFFF); + pp = pte1 & 3; - if ((sr_kp(sre) && (vcpu->arch.shared->msr & MSR_PR)) || - (sr_ks(sre) && !(vcpu->arch.shared->msr & MSR_PR))) + if ((sr_kp(sre) && (kvmppc_get_msr(vcpu) & MSR_PR)) || + (sr_ks(sre) && !(kvmppc_get_msr(vcpu) & MSR_PR))) pp |= 4; pte->may_write = false; @@ -260,7 +263,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, } dprintk_pte("MMU: Found PTE -> %x %x - %x\n", - pteg[i], pteg[i+1], pp); + pte0, pte1, pp); found = 1; break; } @@ -269,8 +272,8 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, /* Update PTE C and A bits, so the guest's swapper knows we used the page */ if (found) { - u32 pte_r = pteg[i+1]; - char __user *addr = (char __user *) &pteg[i+1]; + u32 pte_r = pte1; + char __user *addr = (char __user *) (ptegp + (i+1) * sizeof(u32)); /* * Use single-byte writes to update the HPTE, to @@ -296,7 +299,8 @@ no_page_found: to_book3s(vcpu)->sdr1, ptegp); for (i=0; i<16; i+=2) { dprintk_pte(" %02d: 0x%x - 0x%x (0x%x)\n", - i, pteg[i], pteg[i+1], ptem); + i, be32_to_cpu(pteg[i]), + be32_to_cpu(pteg[i+1]), ptem); } } @@ -316,7 +320,7 @@ static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, /* Magic page override */ if (unlikely(mp_ea) && unlikely((eaddr & ~0xfffULL) == (mp_ea & ~0xfffULL)) && - !(vcpu->arch.shared->msr & MSR_PR)) { + !(kvmppc_get_msr(vcpu) & MSR_PR)) { pte->vpage = kvmppc_mmu_book3s_32_ea_to_vp(vcpu, eaddr, data); pte->raddr = vcpu->arch.magic_page_pa | (pte->raddr & 0xfff); pte->raddr &= KVM_PAM; @@ -341,13 +345,13 @@ static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, static u32 kvmppc_mmu_book3s_32_mfsrin(struct kvm_vcpu *vcpu, u32 srnum) { - return vcpu->arch.shared->sr[srnum]; + return kvmppc_get_sr(vcpu, srnum); } static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, ulong value) { - vcpu->arch.shared->sr[srnum] = value; + kvmppc_set_sr(vcpu, srnum, value); kvmppc_mmu_map_segment(vcpu, srnum << SID_SHIFT); } @@ -367,8 +371,9 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, ulong ea = esid << SID_SHIFT; u32 sr; u64 gvsid = esid; + u64 msr = kvmppc_get_msr(vcpu); - if (vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) { + if (msr & (MSR_DR|MSR_IR)) { sr = find_sr(vcpu, ea); if (sr_valid(sr)) gvsid = sr_vsid(sr); @@ -377,7 +382,7 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, /* In case we only have one of MSR_IR or MSR_DR set, let's put that in the real-mode context (and hope RM doesn't access high memory) */ - switch (vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) { + switch (msr & (MSR_DR|MSR_IR)) { case 0: *vsid = VSID_REAL | esid; break; @@ -397,7 +402,7 @@ static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, BUG(); } - if (vcpu->arch.shared->msr & MSR_PR) + if (msr & MSR_PR) *vsid |= VSID_PR; return 0; diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index 5fac89dfe4cd..678e75370495 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -92,7 +92,7 @@ static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid) struct kvmppc_sid_map *map; u16 sid_map_mask; - if (vcpu->arch.shared->msr & MSR_PR) + if (kvmppc_get_msr(vcpu) & MSR_PR) gvsid |= VSID_PR; sid_map_mask = kvmppc_sid_hash(vcpu, gvsid); @@ -279,7 +279,7 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid) u16 sid_map_mask; static int backwards_map = 0; - if (vcpu->arch.shared->msr & MSR_PR) + if (kvmppc_get_msr(vcpu) & MSR_PR) gvsid |= VSID_PR; /* We might get collisions that trap in preceding order, so let's diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c index 83da1f868fd5..774a253ca4e1 100644 --- a/arch/powerpc/kvm/book3s_64_mmu.c +++ b/arch/powerpc/kvm/book3s_64_mmu.c @@ -38,7 +38,7 @@ static void kvmppc_mmu_book3s_64_reset_msr(struct kvm_vcpu *vcpu) { - kvmppc_set_msr(vcpu, MSR_SF); + kvmppc_set_msr(vcpu, vcpu->arch.intr_msr); } static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe( @@ -226,7 +226,7 @@ static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, /* Magic page override */ if (unlikely(mp_ea) && unlikely((eaddr & ~0xfffULL) == (mp_ea & ~0xfffULL)) && - !(vcpu->arch.shared->msr & MSR_PR)) { + !(kvmppc_get_msr(vcpu) & MSR_PR)) { gpte->eaddr = eaddr; gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu, eaddr, data); gpte->raddr = vcpu->arch.magic_page_pa | (gpte->raddr & 0xfff); @@ -269,18 +269,21 @@ do_second: goto no_page_found; } - if ((vcpu->arch.shared->msr & MSR_PR) && slbe->Kp) + if ((kvmppc_get_msr(vcpu) & MSR_PR) && slbe->Kp) key = 4; - else if (!(vcpu->arch.shared->msr & MSR_PR) && slbe->Ks) + else if (!(kvmppc_get_msr(vcpu) & MSR_PR) && slbe->Ks) key = 4; for (i=0; i<16; i+=2) { + u64 pte0 = be64_to_cpu(pteg[i]); + u64 pte1 = be64_to_cpu(pteg[i + 1]); + /* Check all relevant fields of 1st dword */ - if ((pteg[i] & v_mask) == v_val) { + if ((pte0 & v_mask) == v_val) { /* If large page bit is set, check pgsize encoding */ if (slbe->large && (vcpu->arch.hflags & BOOK3S_HFLAG_MULTI_PGSIZE)) { - pgsize = decode_pagesize(slbe, pteg[i+1]); + pgsize = decode_pagesize(slbe, pte1); if (pgsize < 0) continue; } @@ -297,8 +300,8 @@ do_second: goto do_second; } - v = pteg[i]; - r = pteg[i+1]; + v = be64_to_cpu(pteg[i]); + r = be64_to_cpu(pteg[i+1]); pp = (r & HPTE_R_PP) | key; if (r & HPTE_R_PP0) pp |= 8; @@ -310,6 +313,9 @@ do_second: gpte->raddr = (r & HPTE_R_RPN & ~eaddr_mask) | (eaddr & eaddr_mask); gpte->page_size = pgsize; gpte->may_execute = ((r & HPTE_R_N) ? false : true); + if (unlikely(vcpu->arch.disable_kernel_nx) && + !(kvmppc_get_msr(vcpu) & MSR_PR)) + gpte->may_execute = true; gpte->may_read = false; gpte->may_write = false; @@ -342,14 +348,14 @@ do_second: * non-PAPR platforms such as mac99, and this is * what real hardware does. */ - char __user *addr = (char __user *) &pteg[i+1]; + char __user *addr = (char __user *) (ptegp + (i + 1) * sizeof(u64)); r |= HPTE_R_R; put_user(r >> 8, addr + 6); } if (iswrite && gpte->may_write && !(r & HPTE_R_C)) { /* Set the dirty flag */ /* Use a single byte write */ - char __user *addr = (char __user *) &pteg[i+1]; + char __user *addr = (char __user *) (ptegp + (i + 1) * sizeof(u64)); r |= HPTE_R_C; put_user(r, addr + 7); } @@ -479,7 +485,7 @@ static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu) vcpu->arch.slb[i].origv = 0; } - if (vcpu->arch.shared->msr & MSR_IR) { + if (kvmppc_get_msr(vcpu) & MSR_IR) { kvmppc_mmu_flush_segments(vcpu); kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu)); } @@ -563,7 +569,7 @@ static int segment_contains_magic_page(struct kvm_vcpu *vcpu, ulong esid) { ulong mp_ea = vcpu->arch.magic_page_ea; - return mp_ea && !(vcpu->arch.shared->msr & MSR_PR) && + return mp_ea && !(kvmppc_get_msr(vcpu) & MSR_PR) && (mp_ea >> SID_SHIFT) == esid; } #endif @@ -576,8 +582,9 @@ static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, u64 gvsid = esid; ulong mp_ea = vcpu->arch.magic_page_ea; int pagesize = MMU_PAGE_64K; + u64 msr = kvmppc_get_msr(vcpu); - if (vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) { + if (msr & (MSR_DR|MSR_IR)) { slb = kvmppc_mmu_book3s_64_find_slbe(vcpu, ea); if (slb) { gvsid = slb->vsid; @@ -590,7 +597,7 @@ static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, } } - switch (vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) { + switch (msr & (MSR_DR|MSR_IR)) { case 0: gvsid = VSID_REAL | esid; break; @@ -623,7 +630,7 @@ static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, ulong esid, gvsid |= VSID_64K; #endif - if (vcpu->arch.shared->msr & MSR_PR) + if (kvmppc_get_msr(vcpu) & MSR_PR) gvsid |= VSID_PR; *vsid = gvsid; @@ -633,7 +640,7 @@ no_slb: /* Catch magic page case */ if (unlikely(mp_ea) && unlikely(esid == (mp_ea >> SID_SHIFT)) && - !(vcpu->arch.shared->msr & MSR_PR)) { + !(kvmppc_get_msr(vcpu) & MSR_PR)) { *vsid = VSID_REAL | esid; return 0; } diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 0d513af62bba..0ac98392f363 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -58,7 +58,7 @@ static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid) struct kvmppc_sid_map *map; u16 sid_map_mask; - if (vcpu->arch.shared->msr & MSR_PR) + if (kvmppc_get_msr(vcpu) & MSR_PR) gvsid |= VSID_PR; sid_map_mask = kvmppc_sid_hash(vcpu, gvsid); @@ -230,7 +230,7 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid) u16 sid_map_mask; static int backwards_map = 0; - if (vcpu->arch.shared->msr & MSR_PR) + if (kvmppc_get_msr(vcpu) & MSR_PR) gvsid |= VSID_PR; /* We might get collisions that trap in preceding order, so let's @@ -271,11 +271,8 @@ static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid) int found_inval = -1; int r; - if (!svcpu->slb_max) - svcpu->slb_max = 1; - /* Are we overwriting? */ - for (i = 1; i < svcpu->slb_max; i++) { + for (i = 0; i < svcpu->slb_max; i++) { if (!(svcpu->slb[i].esid & SLB_ESID_V)) found_inval = i; else if ((svcpu->slb[i].esid & ESID_MASK) == esid) { @@ -285,7 +282,7 @@ static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid) } /* Found a spare entry that was invalidated before */ - if (found_inval > 0) { + if (found_inval >= 0) { r = found_inval; goto out; } @@ -359,7 +356,7 @@ void kvmppc_mmu_flush_segment(struct kvm_vcpu *vcpu, ulong ea, ulong seg_size) ulong seg_mask = -seg_size; int i; - for (i = 1; i < svcpu->slb_max; i++) { + for (i = 0; i < svcpu->slb_max; i++) { if ((svcpu->slb[i].esid & SLB_ESID_V) && (svcpu->slb[i].esid & seg_mask) == ea) { /* Invalidate this entry */ @@ -373,7 +370,7 @@ void kvmppc_mmu_flush_segment(struct kvm_vcpu *vcpu, ulong ea, ulong seg_size) void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu) { struct kvmppc_book3s_shadow_vcpu *svcpu = svcpu_get(vcpu); - svcpu->slb_max = 1; + svcpu->slb_max = 0; svcpu->slb[0].esid = 0; svcpu_put(svcpu); } diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index fb25ebc0af0c..80561074078d 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -52,7 +52,7 @@ static void kvmppc_rmap_reset(struct kvm *kvm); long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp) { - unsigned long hpt; + unsigned long hpt = 0; struct revmap_entry *rev; struct page *page = NULL; long order = KVM_DEFAULT_HPT_ORDER; @@ -64,22 +64,11 @@ long kvmppc_alloc_hpt(struct kvm *kvm, u32 *htab_orderp) } kvm->arch.hpt_cma_alloc = 0; - /* - * try first to allocate it from the kernel page allocator. - * We keep the CMA reserved for failed allocation. - */ - hpt = __get_free_pages(GFP_KERNEL | __GFP_ZERO | __GFP_REPEAT | - __GFP_NOWARN, order - PAGE_SHIFT); - - /* Next try to allocate from the preallocated pool */ - if (!hpt) { - VM_BUG_ON(order < KVM_CMA_CHUNK_ORDER); - page = kvm_alloc_hpt(1 << (order - PAGE_SHIFT)); - if (page) { - hpt = (unsigned long)pfn_to_kaddr(page_to_pfn(page)); - kvm->arch.hpt_cma_alloc = 1; - } else - --order; + VM_BUG_ON(order < KVM_CMA_CHUNK_ORDER); + page = kvm_alloc_hpt(1 << (order - PAGE_SHIFT)); + if (page) { + hpt = (unsigned long)pfn_to_kaddr(page_to_pfn(page)); + kvm->arch.hpt_cma_alloc = 1; } /* Lastly try successively smaller sizes from the page allocator */ @@ -596,6 +585,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, struct kvm *kvm = vcpu->kvm; unsigned long *hptep, hpte[3], r; unsigned long mmu_seq, psize, pte_size; + unsigned long gpa_base, gfn_base; unsigned long gpa, gfn, hva, pfn; struct kvm_memory_slot *memslot; unsigned long *rmap; @@ -634,7 +624,9 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, /* Translate the logical address and get the page */ psize = hpte_page_size(hpte[0], r); - gpa = (r & HPTE_R_RPN & ~(psize - 1)) | (ea & (psize - 1)); + gpa_base = r & HPTE_R_RPN & ~(psize - 1); + gfn_base = gpa_base >> PAGE_SHIFT; + gpa = gpa_base | (ea & (psize - 1)); gfn = gpa >> PAGE_SHIFT; memslot = gfn_to_memslot(kvm, gfn); @@ -646,6 +638,13 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, if (!kvm->arch.using_mmu_notifiers) return -EFAULT; /* should never get here */ + /* + * This should never happen, because of the slot_is_aligned() + * check in kvmppc_do_h_enter(). + */ + if (gfn_base < memslot->base_gfn) + return -EFAULT; + /* used to check for invalidations in progress */ mmu_seq = kvm->mmu_notifier_seq; smp_rmb(); @@ -738,7 +737,8 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, goto out_unlock; hpte[0] = (hpte[0] & ~HPTE_V_ABSENT) | HPTE_V_VALID; - rmap = &memslot->arch.rmap[gfn - memslot->base_gfn]; + /* Always put the HPTE in the rmap chain for the page base address */ + rmap = &memslot->arch.rmap[gfn_base - memslot->base_gfn]; lock_rmap(rmap); /* Check if we might have been invalidated; let the guest retry if so */ @@ -1060,22 +1060,33 @@ void kvm_set_spte_hva_hv(struct kvm *kvm, unsigned long hva, pte_t pte) kvm_handle_hva(kvm, hva, kvm_unmap_rmapp); } -static int kvm_test_clear_dirty(struct kvm *kvm, unsigned long *rmapp) +static int vcpus_running(struct kvm *kvm) +{ + return atomic_read(&kvm->arch.vcpus_running) != 0; +} + +/* + * Returns the number of system pages that are dirty. + * This can be more than 1 if we find a huge-page HPTE. + */ +static int kvm_test_clear_dirty_npages(struct kvm *kvm, unsigned long *rmapp) { struct revmap_entry *rev = kvm->arch.revmap; unsigned long head, i, j; + unsigned long n; + unsigned long v, r; unsigned long *hptep; - int ret = 0; + int npages_dirty = 0; retry: lock_rmap(rmapp); if (*rmapp & KVMPPC_RMAP_CHANGED) { *rmapp &= ~KVMPPC_RMAP_CHANGED; - ret = 1; + npages_dirty = 1; } if (!(*rmapp & KVMPPC_RMAP_PRESENT)) { unlock_rmap(rmapp); - return ret; + return npages_dirty; } i = head = *rmapp & KVMPPC_RMAP_INDEX; @@ -1083,7 +1094,22 @@ static int kvm_test_clear_dirty(struct kvm *kvm, unsigned long *rmapp) hptep = (unsigned long *) (kvm->arch.hpt_virt + (i << 4)); j = rev[i].forw; - if (!(hptep[1] & HPTE_R_C)) + /* + * Checking the C (changed) bit here is racy since there + * is no guarantee about when the hardware writes it back. + * If the HPTE is not writable then it is stable since the + * page can't be written to, and we would have done a tlbie + * (which forces the hardware to complete any writeback) + * when making the HPTE read-only. + * If vcpus are running then this call is racy anyway + * since the page could get dirtied subsequently, so we + * expect there to be a further call which would pick up + * any delayed C bit writeback. + * Otherwise we need to do the tlbie even if C==0 in + * order to pick up any delayed writeback of C. + */ + if (!(hptep[1] & HPTE_R_C) && + (!hpte_is_writable(hptep[1]) || vcpus_running(kvm))) continue; if (!try_lock_hpte(hptep, HPTE_V_HVLOCK)) { @@ -1095,24 +1121,33 @@ static int kvm_test_clear_dirty(struct kvm *kvm, unsigned long *rmapp) } /* Now check and modify the HPTE */ - if ((hptep[0] & HPTE_V_VALID) && (hptep[1] & HPTE_R_C)) { - /* need to make it temporarily absent to clear C */ - hptep[0] |= HPTE_V_ABSENT; - kvmppc_invalidate_hpte(kvm, hptep, i); - hptep[1] &= ~HPTE_R_C; - eieio(); - hptep[0] = (hptep[0] & ~HPTE_V_ABSENT) | HPTE_V_VALID; + if (!(hptep[0] & HPTE_V_VALID)) + continue; + + /* need to make it temporarily absent so C is stable */ + hptep[0] |= HPTE_V_ABSENT; + kvmppc_invalidate_hpte(kvm, hptep, i); + v = hptep[0]; + r = hptep[1]; + if (r & HPTE_R_C) { + hptep[1] = r & ~HPTE_R_C; if (!(rev[i].guest_rpte & HPTE_R_C)) { rev[i].guest_rpte |= HPTE_R_C; note_hpte_modification(kvm, &rev[i]); } - ret = 1; + n = hpte_page_size(v, r); + n = (n + PAGE_SIZE - 1) >> PAGE_SHIFT; + if (n > npages_dirty) + npages_dirty = n; + eieio(); } - hptep[0] &= ~HPTE_V_HVLOCK; + v &= ~(HPTE_V_ABSENT | HPTE_V_HVLOCK); + v |= HPTE_V_VALID; + hptep[0] = v; } while ((i = j) != head); unlock_rmap(rmapp); - return ret; + return npages_dirty; } static void harvest_vpa_dirty(struct kvmppc_vpa *vpa, @@ -1136,15 +1171,22 @@ static void harvest_vpa_dirty(struct kvmppc_vpa *vpa, long kvmppc_hv_get_dirty_log(struct kvm *kvm, struct kvm_memory_slot *memslot, unsigned long *map) { - unsigned long i; + unsigned long i, j; unsigned long *rmapp; struct kvm_vcpu *vcpu; preempt_disable(); rmapp = memslot->arch.rmap; for (i = 0; i < memslot->npages; ++i) { - if (kvm_test_clear_dirty(kvm, rmapp) && map) - __set_bit_le(i, map); + int npages = kvm_test_clear_dirty_npages(kvm, rmapp); + /* + * Note that if npages > 0 then i must be a multiple of npages, + * since we always put huge-page HPTEs in the rmap chain + * corresponding to their page base address. + */ + if (npages && map) + for (j = i; npages; ++j, --npages) + __set_bit_le(j, map); ++rmapp; } diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S index 4f12e8f0c718..3589c4e3d49b 100644 --- a/arch/powerpc/kvm/book3s_64_slb.S +++ b/arch/powerpc/kvm/book3s_64_slb.S @@ -17,30 +17,9 @@ * Authors: Alexander Graf <agraf@suse.de> */ -#ifdef __LITTLE_ENDIAN__ -#error Need to fix SLB shadow accesses in little endian mode -#endif - -#define SHADOW_SLB_ESID(num) (SLBSHADOW_SAVEAREA + (num * 0x10)) -#define SHADOW_SLB_VSID(num) (SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8) -#define UNBOLT_SLB_ENTRY(num) \ - ld r9, SHADOW_SLB_ESID(num)(r12); \ - /* Invalid? Skip. */; \ - rldicl. r0, r9, 37, 63; \ - beq slb_entry_skip_ ## num; \ - xoris r9, r9, SLB_ESID_V@h; \ - std r9, SHADOW_SLB_ESID(num)(r12); \ - slb_entry_skip_ ## num: - -#define REBOLT_SLB_ENTRY(num) \ - ld r10, SHADOW_SLB_ESID(num)(r11); \ - cmpdi r10, 0; \ - beq slb_exit_skip_ ## num; \ - oris r10, r10, SLB_ESID_V@h; \ - ld r9, SHADOW_SLB_VSID(num)(r11); \ - slbmte r9, r10; \ - std r10, SHADOW_SLB_ESID(num)(r11); \ -slb_exit_skip_ ## num: +#define SHADOW_SLB_ENTRY_LEN 0x10 +#define OFFSET_ESID(x) (SHADOW_SLB_ENTRY_LEN * x) +#define OFFSET_VSID(x) ((SHADOW_SLB_ENTRY_LEN * x) + 8) /****************************************************************************** * * @@ -64,20 +43,15 @@ slb_exit_skip_ ## num: * SVCPU[LR] = guest LR */ - /* Remove LPAR shadow entries */ +BEGIN_FW_FTR_SECTION -#if SLB_NUM_BOLTED == 3 + /* Declare SLB shadow as 0 entries big */ - ld r12, PACA_SLBSHADOWPTR(r13) + ld r11, PACA_SLBSHADOWPTR(r13) + li r8, 0 + stb r8, 3(r11) - /* Remove bolted entries */ - UNBOLT_SLB_ENTRY(0) - UNBOLT_SLB_ENTRY(1) - UNBOLT_SLB_ENTRY(2) - -#else -#error unknown number of bolted entries -#endif +END_FW_FTR_SECTION_IFSET(FW_FEATURE_LPAR) /* Flush SLB */ @@ -100,7 +74,7 @@ slb_loop_enter: ld r10, 0(r11) - rldicl. r0, r10, 37, 63 + andis. r9, r10, SLB_ESID_V@h beq slb_loop_enter_skip ld r9, 8(r11) @@ -137,23 +111,42 @@ slb_do_enter: * */ - /* Restore bolted entries from the shadow and fix it along the way */ + /* Remove all SLB entries that are in use. */ - /* We don't store anything in entry 0, so we don't need to take care of it */ + li r0, r0 + slbmte r0, r0 slbia - isync -#if SLB_NUM_BOLTED == 3 + /* Restore bolted entries from the shadow */ ld r11, PACA_SLBSHADOWPTR(r13) - REBOLT_SLB_ENTRY(0) - REBOLT_SLB_ENTRY(1) - REBOLT_SLB_ENTRY(2) - -#else -#error unknown number of bolted entries -#endif +BEGIN_FW_FTR_SECTION + + /* Declare SLB shadow as SLB_NUM_BOLTED entries big */ + + li r8, SLB_NUM_BOLTED + stb r8, 3(r11) + +END_FW_FTR_SECTION_IFSET(FW_FEATURE_LPAR) + + /* Manually load all entries from shadow SLB */ + + li r8, SLBSHADOW_SAVEAREA + li r7, SLBSHADOW_SAVEAREA + 8 + + .rept SLB_NUM_BOLTED + LDX_BE r10, r11, r8 + cmpdi r10, 0 + beq 1f + LDX_BE r9, r11, r7 + slbmte r9, r10 +1: addi r7, r7, SHADOW_SLB_ENTRY_LEN + addi r8, r8, SHADOW_SLB_ENTRY_LEN + .endr + + isync + sync slb_do_exit: diff --git a/arch/powerpc/kvm/book3s_emulate.c b/arch/powerpc/kvm/book3s_emulate.c index 99d40f8977e8..3f295269af37 100644 --- a/arch/powerpc/kvm/book3s_emulate.c +++ b/arch/powerpc/kvm/book3s_emulate.c @@ -80,7 +80,7 @@ static bool spr_allowed(struct kvm_vcpu *vcpu, enum priv_level level) return false; /* Limit user space to its own small SPR set */ - if ((vcpu->arch.shared->msr & MSR_PR) && level > PRIV_PROBLEM) + if ((kvmppc_get_msr(vcpu) & MSR_PR) && level > PRIV_PROBLEM) return false; return true; @@ -94,14 +94,31 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, int rs = get_rs(inst); int ra = get_ra(inst); int rb = get_rb(inst); + u32 inst_sc = 0x44000002; switch (get_op(inst)) { + case 0: + emulated = EMULATE_FAIL; + if ((kvmppc_get_msr(vcpu) & MSR_LE) && + (inst == swab32(inst_sc))) { + /* + * This is the byte reversed syscall instruction of our + * hypercall handler. Early versions of LE Linux didn't + * swap the instructions correctly and ended up in + * illegal instructions. + * Just always fail hypercalls on these broken systems. + */ + kvmppc_set_gpr(vcpu, 3, EV_UNIMPLEMENTED); + kvmppc_set_pc(vcpu, kvmppc_get_pc(vcpu) + 4); + emulated = EMULATE_DONE; + } + break; case 19: switch (get_xop(inst)) { case OP_19_XOP_RFID: case OP_19_XOP_RFI: - kvmppc_set_pc(vcpu, vcpu->arch.shared->srr0); - kvmppc_set_msr(vcpu, vcpu->arch.shared->srr1); + kvmppc_set_pc(vcpu, kvmppc_get_srr0(vcpu)); + kvmppc_set_msr(vcpu, kvmppc_get_srr1(vcpu)); *advance = 0; break; @@ -113,16 +130,16 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, case 31: switch (get_xop(inst)) { case OP_31_XOP_MFMSR: - kvmppc_set_gpr(vcpu, rt, vcpu->arch.shared->msr); + kvmppc_set_gpr(vcpu, rt, kvmppc_get_msr(vcpu)); break; case OP_31_XOP_MTMSRD: { ulong rs_val = kvmppc_get_gpr(vcpu, rs); if (inst & 0x10000) { - ulong new_msr = vcpu->arch.shared->msr; + ulong new_msr = kvmppc_get_msr(vcpu); new_msr &= ~(MSR_RI | MSR_EE); new_msr |= rs_val & (MSR_RI | MSR_EE); - vcpu->arch.shared->msr = new_msr; + kvmppc_set_msr_fast(vcpu, new_msr); } else kvmppc_set_msr(vcpu, rs_val); break; @@ -179,7 +196,7 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, ulong cmd = kvmppc_get_gpr(vcpu, 3); int i; - if ((vcpu->arch.shared->msr & MSR_PR) || + if ((kvmppc_get_msr(vcpu) & MSR_PR) || !vcpu->arch.papr_enabled) { emulated = EMULATE_FAIL; break; @@ -261,14 +278,14 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, ra_val = kvmppc_get_gpr(vcpu, ra); addr = (ra_val + rb_val) & ~31ULL; - if (!(vcpu->arch.shared->msr & MSR_SF)) + if (!(kvmppc_get_msr(vcpu) & MSR_SF)) addr &= 0xffffffff; vaddr = addr; r = kvmppc_st(vcpu, &addr, 32, zeros, true); if ((r == -ENOENT) || (r == -EPERM)) { *advance = 0; - vcpu->arch.shared->dar = vaddr; + kvmppc_set_dar(vcpu, vaddr); vcpu->arch.fault_dar = vaddr; dsisr = DSISR_ISSTORE; @@ -277,7 +294,7 @@ int kvmppc_core_emulate_op_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, else if (r == -EPERM) dsisr |= DSISR_PROTFAULT; - vcpu->arch.shared->dsisr = dsisr; + kvmppc_set_dsisr(vcpu, dsisr); vcpu->arch.fault_dsisr = dsisr; kvmppc_book3s_queue_irqprio(vcpu, @@ -356,10 +373,10 @@ int kvmppc_core_emulate_mtspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val) to_book3s(vcpu)->sdr1 = spr_val; break; case SPRN_DSISR: - vcpu->arch.shared->dsisr = spr_val; + kvmppc_set_dsisr(vcpu, spr_val); break; case SPRN_DAR: - vcpu->arch.shared->dar = spr_val; + kvmppc_set_dar(vcpu, spr_val); break; case SPRN_HIOR: to_book3s(vcpu)->hior = spr_val; @@ -438,6 +455,31 @@ int kvmppc_core_emulate_mtspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val) case SPRN_GQR7: to_book3s(vcpu)->gqr[sprn - SPRN_GQR0] = spr_val; break; + case SPRN_FSCR: + vcpu->arch.fscr = spr_val; + break; +#ifdef CONFIG_PPC_BOOK3S_64 + case SPRN_BESCR: + vcpu->arch.bescr = spr_val; + break; + case SPRN_EBBHR: + vcpu->arch.ebbhr = spr_val; + break; + case SPRN_EBBRR: + vcpu->arch.ebbrr = spr_val; + break; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + case SPRN_TFHAR: + vcpu->arch.tfhar = spr_val; + break; + case SPRN_TEXASR: + vcpu->arch.texasr = spr_val; + break; + case SPRN_TFIAR: + vcpu->arch.tfiar = spr_val; + break; +#endif +#endif case SPRN_ICTC: case SPRN_THRM1: case SPRN_THRM2: @@ -455,6 +497,13 @@ int kvmppc_core_emulate_mtspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong spr_val) case SPRN_WPAR_GEKKO: case SPRN_MSSSR0: case SPRN_DABR: +#ifdef CONFIG_PPC_BOOK3S_64 + case SPRN_MMCRS: + case SPRN_MMCRA: + case SPRN_MMCR0: + case SPRN_MMCR1: + case SPRN_MMCR2: +#endif break; unprivileged: default: @@ -493,10 +542,10 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val *spr_val = to_book3s(vcpu)->sdr1; break; case SPRN_DSISR: - *spr_val = vcpu->arch.shared->dsisr; + *spr_val = kvmppc_get_dsisr(vcpu); break; case SPRN_DAR: - *spr_val = vcpu->arch.shared->dar; + *spr_val = kvmppc_get_dar(vcpu); break; case SPRN_HIOR: *spr_val = to_book3s(vcpu)->hior; @@ -538,6 +587,31 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val case SPRN_GQR7: *spr_val = to_book3s(vcpu)->gqr[sprn - SPRN_GQR0]; break; + case SPRN_FSCR: + *spr_val = vcpu->arch.fscr; + break; +#ifdef CONFIG_PPC_BOOK3S_64 + case SPRN_BESCR: + *spr_val = vcpu->arch.bescr; + break; + case SPRN_EBBHR: + *spr_val = vcpu->arch.ebbhr; + break; + case SPRN_EBBRR: + *spr_val = vcpu->arch.ebbrr; + break; +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM + case SPRN_TFHAR: + *spr_val = vcpu->arch.tfhar; + break; + case SPRN_TEXASR: + *spr_val = vcpu->arch.texasr; + break; + case SPRN_TFIAR: + *spr_val = vcpu->arch.tfiar; + break; +#endif +#endif case SPRN_THRM1: case SPRN_THRM2: case SPRN_THRM3: @@ -553,6 +627,14 @@ int kvmppc_core_emulate_mfspr_pr(struct kvm_vcpu *vcpu, int sprn, ulong *spr_val case SPRN_WPAR_GEKKO: case SPRN_MSSSR0: case SPRN_DABR: +#ifdef CONFIG_PPC_BOOK3S_64 + case SPRN_MMCRS: + case SPRN_MMCRA: + case SPRN_MMCR0: + case SPRN_MMCR1: + case SPRN_MMCR2: + case SPRN_TIR: +#endif *spr_val = 0; break; default: @@ -569,48 +651,17 @@ unprivileged: u32 kvmppc_alignment_dsisr(struct kvm_vcpu *vcpu, unsigned int inst) { - u32 dsisr = 0; - - /* - * This is what the spec says about DSISR bits (not mentioned = 0): - * - * 12:13 [DS] Set to bits 30:31 - * 15:16 [X] Set to bits 29:30 - * 17 [X] Set to bit 25 - * [D/DS] Set to bit 5 - * 18:21 [X] Set to bits 21:24 - * [D/DS] Set to bits 1:4 - * 22:26 Set to bits 6:10 (RT/RS/FRT/FRS) - * 27:31 Set to bits 11:15 (RA) - */ - - switch (get_op(inst)) { - /* D-form */ - case OP_LFS: - case OP_LFD: - case OP_STFD: - case OP_STFS: - dsisr |= (inst >> 12) & 0x4000; /* bit 17 */ - dsisr |= (inst >> 17) & 0x3c00; /* bits 18:21 */ - break; - /* X-form */ - case 31: - dsisr |= (inst << 14) & 0x18000; /* bits 15:16 */ - dsisr |= (inst << 8) & 0x04000; /* bit 17 */ - dsisr |= (inst << 3) & 0x03c00; /* bits 18:21 */ - break; - default: - printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst); - break; - } - - dsisr |= (inst >> 16) & 0x03ff; /* bits 22:31 */ - - return dsisr; + return make_dsisr(inst); } ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst) { +#ifdef CONFIG_PPC_BOOK3S_64 + /* + * Linux's fix_alignment() assumes that DAR is valid, so can we + */ + return vcpu->arch.fault_dar; +#else ulong dar = 0; ulong ra = get_ra(inst); ulong rb = get_rb(inst); @@ -635,4 +686,5 @@ ulong kvmppc_alignment_dar(struct kvm_vcpu *vcpu, unsigned int inst) } return dar; +#endif } diff --git a/arch/powerpc/kvm/book3s_exports.c b/arch/powerpc/kvm/book3s_exports.c index 20d4ea8e656d..0d013fbc2e13 100644 --- a/arch/powerpc/kvm/book3s_exports.c +++ b/arch/powerpc/kvm/book3s_exports.c @@ -18,6 +18,7 @@ */ #include <linux/export.h> +#include <asm/kvm_ppc.h> #include <asm/kvm_book3s.h> #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 8227dba5af0f..aba05bbb3e74 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -879,24 +879,9 @@ static int kvmppc_get_one_reg_hv(struct kvm_vcpu *vcpu, u64 id, case KVM_REG_PPC_IAMR: *val = get_reg_val(id, vcpu->arch.iamr); break; - case KVM_REG_PPC_FSCR: - *val = get_reg_val(id, vcpu->arch.fscr); - break; case KVM_REG_PPC_PSPB: *val = get_reg_val(id, vcpu->arch.pspb); break; - case KVM_REG_PPC_EBBHR: - *val = get_reg_val(id, vcpu->arch.ebbhr); - break; - case KVM_REG_PPC_EBBRR: - *val = get_reg_val(id, vcpu->arch.ebbrr); - break; - case KVM_REG_PPC_BESCR: - *val = get_reg_val(id, vcpu->arch.bescr); - break; - case KVM_REG_PPC_TAR: - *val = get_reg_val(id, vcpu->arch.tar); - break; case KVM_REG_PPC_DPDES: *val = get_reg_val(id, vcpu->arch.vcore->dpdes); break; @@ -1091,24 +1076,9 @@ static int kvmppc_set_one_reg_hv(struct kvm_vcpu *vcpu, u64 id, case KVM_REG_PPC_IAMR: vcpu->arch.iamr = set_reg_val(id, *val); break; - case KVM_REG_PPC_FSCR: - vcpu->arch.fscr = set_reg_val(id, *val); - break; case KVM_REG_PPC_PSPB: vcpu->arch.pspb = set_reg_val(id, *val); break; - case KVM_REG_PPC_EBBHR: - vcpu->arch.ebbhr = set_reg_val(id, *val); - break; - case KVM_REG_PPC_EBBRR: - vcpu->arch.ebbrr = set_reg_val(id, *val); - break; - case KVM_REG_PPC_BESCR: - vcpu->arch.bescr = set_reg_val(id, *val); - break; - case KVM_REG_PPC_TAR: - vcpu->arch.tar = set_reg_val(id, *val); - break; case KVM_REG_PPC_DPDES: vcpu->arch.vcore->dpdes = set_reg_val(id, *val); break; @@ -1280,6 +1250,17 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_hv(struct kvm *kvm, goto free_vcpu; vcpu->arch.shared = &vcpu->arch.shregs; +#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE + /* + * The shared struct is never shared on HV, + * so we can always use host endianness + */ +#ifdef __BIG_ENDIAN__ + vcpu->arch.shared_big_endian = true; +#else + vcpu->arch.shared_big_endian = false; +#endif +#endif vcpu->arch.mmcr[0] = MMCR0_FC; vcpu->arch.ctrl = CTRL_RUNLATCH; /* default to host PVR, since we can't spoof it */ @@ -1949,6 +1930,13 @@ static void kvmppc_add_seg_page_size(struct kvm_ppc_one_seg_page_size **sps, * support pte_enc here */ (*sps)->enc[0].pte_enc = def->penc[linux_psize]; + /* + * Add 16MB MPSS support if host supports it + */ + if (linux_psize != MMU_PAGE_16M && def->penc[MMU_PAGE_16M] != -1) { + (*sps)->enc[1].page_shift = 24; + (*sps)->enc[1].pte_enc = def->penc[MMU_PAGE_16M]; + } (*sps)++; } diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 1d6c56ad5b60..6e6224318c36 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -42,13 +42,14 @@ static int global_invalidates(struct kvm *kvm, unsigned long flags) /* * If there is only one vcore, and it's currently running, + * as indicated by local_paca->kvm_hstate.kvm_vcpu being set, * we can use tlbiel as long as we mark all other physical * cores as potentially having stale TLB entries for this lpid. * If we're not using MMU notifiers, we never take pages away * from the guest, so we can use tlbiel if requested. * Otherwise, don't use tlbiel. */ - if (kvm->arch.online_vcores == 1 && local_paca->kvm_hstate.kvm_vcore) + if (kvm->arch.online_vcores == 1 && local_paca->kvm_hstate.kvm_vcpu) global = 0; else if (kvm->arch.using_mmu_notifiers) global = 1; @@ -234,7 +235,7 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags, pte_size = psize; pte = lookup_linux_pte_and_update(pgdir, hva, writing, &pte_size); - if (pte_present(pte)) { + if (pte_present(pte) && !pte_numa(pte)) { if (writing && !pte_write(pte)) /* make the actual HPTE be read-only */ ptel = hpte_make_readonly(ptel); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index b031f932c0cc..974793435a2e 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -86,6 +86,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) lbz r4, LPPACA_PMCINUSE(r3) cmpwi r4, 0 beq 23f /* skip if not */ +BEGIN_FTR_SECTION + ld r3, HSTATE_MMCR(r13) + andi. r4, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO + cmpwi r4, MMCR0_PMAO + beql kvmppc_fix_pmao +END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG) lwz r3, HSTATE_PMC(r13) lwz r4, HSTATE_PMC + 4(r13) lwz r5, HSTATE_PMC + 8(r13) @@ -737,6 +743,12 @@ skip_tm: sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */ mtspr SPRN_MMCR0, r3 /* freeze all counters, disable ints */ isync +BEGIN_FTR_SECTION + ld r3, VCPU_MMCR(r4) + andi. r5, r3, MMCR0_PMAO_SYNC | MMCR0_PMAO + cmpwi r5, MMCR0_PMAO + beql kvmppc_fix_pmao +END_FTR_SECTION_IFSET(CPU_FTR_PMAO_BUG) lwz r3, VCPU_PMC(r4) /* always load up guest PMU registers */ lwz r5, VCPU_PMC + 4(r4) /* to prevent information leak */ lwz r6, VCPU_PMC + 8(r4) @@ -1323,6 +1335,110 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) mr r3, r9 bl kvmppc_save_fp +#ifdef CONFIG_PPC_TRANSACTIONAL_MEM +BEGIN_FTR_SECTION + b 2f +END_FTR_SECTION_IFCLR(CPU_FTR_TM) + /* Turn on TM. */ + mfmsr r8 + li r0, 1 + rldimi r8, r0, MSR_TM_LG, 63-MSR_TM_LG + mtmsrd r8 + + ld r5, VCPU_MSR(r9) + rldicl. r5, r5, 64 - MSR_TS_S_LG, 62 + beq 1f /* TM not active in guest. */ + + li r3, TM_CAUSE_KVM_RESCHED + + /* Clear the MSR RI since r1, r13 are all going to be foobar. */ + li r5, 0 + mtmsrd r5, 1 + + /* All GPRs are volatile at this point. */ + TRECLAIM(R3) + + /* Temporarily store r13 and r9 so we have some regs to play with */ + SET_SCRATCH0(r13) + GET_PACA(r13) + std r9, PACATMSCRATCH(r13) + ld r9, HSTATE_KVM_VCPU(r13) + + /* Get a few more GPRs free. */ + std r29, VCPU_GPRS_TM(29)(r9) + std r30, VCPU_GPRS_TM(30)(r9) + std r31, VCPU_GPRS_TM(31)(r9) + + /* Save away PPR and DSCR soon so don't run with user values. */ + mfspr r31, SPRN_PPR + HMT_MEDIUM + mfspr r30, SPRN_DSCR + ld r29, HSTATE_DSCR(r13) + mtspr SPRN_DSCR, r29 + + /* Save all but r9, r13 & r29-r31 */ + reg = 0 + .rept 29 + .if (reg != 9) && (reg != 13) + std reg, VCPU_GPRS_TM(reg)(r9) + .endif + reg = reg + 1 + .endr + /* ... now save r13 */ + GET_SCRATCH0(r4) + std r4, VCPU_GPRS_TM(13)(r9) + /* ... and save r9 */ + ld r4, PACATMSCRATCH(r13) + std r4, VCPU_GPRS_TM(9)(r9) + + /* Reload stack pointer and TOC. */ + ld r1, HSTATE_HOST_R1(r13) + ld r2, PACATOC(r13) + + /* Set MSR RI now we have r1 and r13 back. */ + li r5, MSR_RI + mtmsrd r5, 1 + + /* Save away checkpinted SPRs. */ + std r31, VCPU_PPR_TM(r9) + std r30, VCPU_DSCR_TM(r9) + mflr r5 + mfcr r6 + mfctr r7 + mfspr r8, SPRN_AMR + mfspr r10, SPRN_TAR + std r5, VCPU_LR_TM(r9) + stw r6, VCPU_CR_TM(r9) + std r7, VCPU_CTR_TM(r9) + std r8, VCPU_AMR_TM(r9) + std r10, VCPU_TAR_TM(r9) + + /* Restore r12 as trap number. */ + lwz r12, VCPU_TRAP(r9) + + /* Save FP/VSX. */ + addi r3, r9, VCPU_FPRS_TM + bl .store_fp_state + addi r3, r9, VCPU_VRS_TM + bl .store_vr_state + mfspr r6, SPRN_VRSAVE + stw r6, VCPU_VRSAVE_TM(r9) +1: + /* + * We need to save these SPRs after the treclaim so that the software + * error code is recorded correctly in the TEXASR. Also the user may + * change these outside of a transaction, so they must always be + * context switched. + */ + mfspr r5, SPRN_TFHAR + mfspr r6, SPRN_TFIAR + mfspr r7, SPRN_TEXASR + std r5, VCPU_TFHAR(r9) + std r6, VCPU_TFIAR(r9) + std r7, VCPU_TEXASR(r9) +2: +#endif + /* Increment yield count if they have a VPA */ ld r8, VCPU_VPA(r9) /* do they have a VPA? */ cmpdi r8, 0 @@ -1335,6 +1451,30 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) 25: /* Save PMU registers if requested */ /* r8 and cr0.eq are live here */ +BEGIN_FTR_SECTION + /* + * POWER8 seems to have a hardware bug where setting + * MMCR0[PMAE] along with MMCR0[PMC1CE] and/or MMCR0[PMCjCE] + * when some counters are already negative doesn't seem + * to cause a performance monitor alert (and hence interrupt). + * The effect of this is that when saving the PMU state, + * if there is no PMU alert pending when we read MMCR0 + * before freezing the counters, but one becomes pending + * before we read the counters, we lose it. + * To work around this, we need a way to freeze the counters + * before reading MMCR0. Normally, freezing the counters + * is done by writing MMCR0 (to set MMCR0[FC]) which + * unavoidably writes MMCR0[PMA0] as well. On POWER8, + * we can also freeze the counters using MMCR2, by writing + * 1s to all the counter freeze condition bits (there are + * 9 bits each for 6 counters). + */ + li r3, -1 /* set all freeze bits */ + clrrdi r3, r3, 10 + mfspr r10, SPRN_MMCR2 + mtspr SPRN_MMCR2, r3 + isync +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) li r3, 1 sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */ mfspr r4, SPRN_MMCR0 /* save MMCR0 */ @@ -1358,6 +1498,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) std r4, VCPU_MMCR(r9) std r5, VCPU_MMCR + 8(r9) std r6, VCPU_MMCR + 16(r9) +BEGIN_FTR_SECTION + std r10, VCPU_MMCR + 24(r9) +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) std r7, VCPU_SIAR(r9) std r8, VCPU_SDAR(r9) mfspr r3, SPRN_PMC1 @@ -1381,12 +1524,10 @@ BEGIN_FTR_SECTION stw r11, VCPU_PMC + 28(r9) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) BEGIN_FTR_SECTION - mfspr r4, SPRN_MMCR2 mfspr r5, SPRN_SIER mfspr r6, SPRN_SPMC1 mfspr r7, SPRN_SPMC2 mfspr r8, SPRN_MMCRS - std r4, VCPU_MMCR + 24(r9) std r5, VCPU_SIER(r9) stw r6, VCPU_PMC + 24(r9) stw r7, VCPU_PMC + 28(r9) @@ -2123,6 +2264,7 @@ machine_check_realmode: beq mc_cont /* If not, deliver a machine check. SRR0/1 are already set */ li r10, BOOK3S_INTERRUPT_MACHINE_CHECK + ld r11, VCPU_MSR(r9) bl kvmppc_msr_interrupt b fast_interrupt_c_return @@ -2327,3 +2469,21 @@ kvmppc_msr_interrupt: li r0, 1 1: rldimi r11, r0, MSR_TS_S_LG, 63 - MSR_TS_T_LG blr + +/* + * This works around a hardware bug on POWER8E processors, where + * writing a 1 to the MMCR0[PMAO] bit doesn't generate a + * performance monitor interrupt. Instead, when we need to have + * an interrupt pending, we have to arrange for a counter to overflow. + */ +kvmppc_fix_pmao: + li r3, 0 + mtspr SPRN_MMCR2, r3 + lis r3, (MMCR0_PMXE | MMCR0_FCECE)@h + ori r3, r3, MMCR0_PMCjCE | MMCR0_C56RUN + mtspr SPRN_MMCR0, r3 + lis r3, 0x7fff + ori r3, r3, 0xffff + mtspr SPRN_PMC6, r3 + isync + blr diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S index 3533c999194a..e2c29e381dc7 100644 --- a/arch/powerpc/kvm/book3s_interrupts.S +++ b/arch/powerpc/kvm/book3s_interrupts.S @@ -104,8 +104,27 @@ kvm_start_lightweight: stb r3, HSTATE_RESTORE_HID5(r13) /* Load up guest SPRG3 value, since it's user readable */ - ld r3, VCPU_SHARED(r4) - ld r3, VCPU_SHARED_SPRG3(r3) + lwz r3, VCPU_SHAREDBE(r4) + cmpwi r3, 0 + ld r5, VCPU_SHARED(r4) + beq sprg3_little_endian +sprg3_big_endian: +#ifdef __BIG_ENDIAN__ + ld r3, VCPU_SHARED_SPRG3(r5) +#else + addi r5, r5, VCPU_SHARED_SPRG3 + ldbrx r3, 0, r5 +#endif + b after_sprg3_load +sprg3_little_endian: +#ifdef __LITTLE_ENDIAN__ + ld r3, VCPU_SHARED_SPRG3(r5) +#else + addi r5, r5, VCPU_SHARED_SPRG3 + ldbrx r3, 0, r5 +#endif + +after_sprg3_load: mtspr SPRN_SPRG3, r3 #endif /* CONFIG_PPC_BOOK3S_64 */ diff --git a/arch/powerpc/kvm/book3s_paired_singles.c b/arch/powerpc/kvm/book3s_paired_singles.c index c1abd95063f4..6c8011fd57e6 100644 --- a/arch/powerpc/kvm/book3s_paired_singles.c +++ b/arch/powerpc/kvm/book3s_paired_singles.c @@ -165,16 +165,18 @@ static inline void kvmppc_sync_qpr(struct kvm_vcpu *vcpu, int rt) static void kvmppc_inject_pf(struct kvm_vcpu *vcpu, ulong eaddr, bool is_store) { - u64 dsisr; - struct kvm_vcpu_arch_shared *shared = vcpu->arch.shared; + u32 dsisr; + u64 msr = kvmppc_get_msr(vcpu); - shared->msr = kvmppc_set_field(shared->msr, 33, 36, 0); - shared->msr = kvmppc_set_field(shared->msr, 42, 47, 0); - shared->dar = eaddr; + msr = kvmppc_set_field(msr, 33, 36, 0); + msr = kvmppc_set_field(msr, 42, 47, 0); + kvmppc_set_msr(vcpu, msr); + kvmppc_set_dar(vcpu, eaddr); /* Page Fault */ dsisr = kvmppc_set_field(0, 33, 33, 1); if (is_store) - shared->dsisr = kvmppc_set_field(dsisr, 38, 38, 1); + dsisr = kvmppc_set_field(dsisr, 38, 38, 1); + kvmppc_set_dsisr(vcpu, dsisr); kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DATA_STORAGE); } @@ -660,7 +662,7 @@ int kvmppc_emulate_paired_single(struct kvm_run *run, struct kvm_vcpu *vcpu) if (!kvmppc_inst_is_paired_single(vcpu, inst)) return EMULATE_FAIL; - if (!(vcpu->arch.shared->msr & MSR_FP)) { + if (!(kvmppc_get_msr(vcpu) & MSR_FP)) { kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL); return EMULATE_AGAIN; } diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c index c5c052a9729c..8eef1e519077 100644 --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -53,6 +53,7 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr, ulong msr); +static void kvmppc_giveup_fac(struct kvm_vcpu *vcpu, ulong fac); /* Some compatibility defines */ #ifdef CONFIG_PPC_BOOK3S_32 @@ -89,6 +90,7 @@ static void kvmppc_core_vcpu_put_pr(struct kvm_vcpu *vcpu) #endif kvmppc_giveup_ext(vcpu, MSR_FP | MSR_VEC | MSR_VSX); + kvmppc_giveup_fac(vcpu, FSCR_TAR_LG); vcpu->cpu = -1; } @@ -115,6 +117,9 @@ void kvmppc_copy_to_svcpu(struct kvmppc_book3s_shadow_vcpu *svcpu, svcpu->ctr = vcpu->arch.ctr; svcpu->lr = vcpu->arch.lr; svcpu->pc = vcpu->arch.pc; +#ifdef CONFIG_PPC_BOOK3S_64 + svcpu->shadow_fscr = vcpu->arch.shadow_fscr; +#endif svcpu->in_use = true; } @@ -158,6 +163,9 @@ void kvmppc_copy_from_svcpu(struct kvm_vcpu *vcpu, vcpu->arch.fault_dar = svcpu->fault_dar; vcpu->arch.fault_dsisr = svcpu->fault_dsisr; vcpu->arch.last_inst = svcpu->last_inst; +#ifdef CONFIG_PPC_BOOK3S_64 + vcpu->arch.shadow_fscr = svcpu->shadow_fscr; +#endif svcpu->in_use = false; out: @@ -246,14 +254,15 @@ static void kvm_set_spte_hva_pr(struct kvm *kvm, unsigned long hva, pte_t pte) static void kvmppc_recalc_shadow_msr(struct kvm_vcpu *vcpu) { - ulong smsr = vcpu->arch.shared->msr; + ulong guest_msr = kvmppc_get_msr(vcpu); + ulong smsr = guest_msr; /* Guest MSR values */ - smsr &= MSR_FE0 | MSR_FE1 | MSR_SF | MSR_SE | MSR_BE; + smsr &= MSR_FE0 | MSR_FE1 | MSR_SF | MSR_SE | MSR_BE | MSR_LE; /* Process MSR values */ smsr |= MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_PR | MSR_EE; /* External providers the guest reserved */ - smsr |= (vcpu->arch.shared->msr & vcpu->arch.guest_owned_ext); + smsr |= (guest_msr & vcpu->arch.guest_owned_ext); /* 64-bit Process MSR values */ #ifdef CONFIG_PPC_BOOK3S_64 smsr |= MSR_ISF | MSR_HV; @@ -263,14 +272,14 @@ static void kvmppc_recalc_shadow_msr(struct kvm_vcpu *vcpu) static void kvmppc_set_msr_pr(struct kvm_vcpu *vcpu, u64 msr) { - ulong old_msr = vcpu->arch.shared->msr; + ulong old_msr = kvmppc_get_msr(vcpu); #ifdef EXIT_DEBUG printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr); #endif msr &= to_book3s(vcpu)->msr_mask; - vcpu->arch.shared->msr = msr; + kvmppc_set_msr_fast(vcpu, msr); kvmppc_recalc_shadow_msr(vcpu); if (msr & MSR_POW) { @@ -281,11 +290,11 @@ static void kvmppc_set_msr_pr(struct kvm_vcpu *vcpu, u64 msr) /* Unset POW bit after we woke up */ msr &= ~MSR_POW; - vcpu->arch.shared->msr = msr; + kvmppc_set_msr_fast(vcpu, msr); } } - if ((vcpu->arch.shared->msr & (MSR_PR|MSR_IR|MSR_DR)) != + if ((kvmppc_get_msr(vcpu) & (MSR_PR|MSR_IR|MSR_DR)) != (old_msr & (MSR_PR|MSR_IR|MSR_DR))) { kvmppc_mmu_flush_segments(vcpu); kvmppc_mmu_map_segment(vcpu, kvmppc_get_pc(vcpu)); @@ -317,7 +326,7 @@ static void kvmppc_set_msr_pr(struct kvm_vcpu *vcpu, u64 msr) } /* Preload FPU if it's enabled */ - if (vcpu->arch.shared->msr & MSR_FP) + if (kvmppc_get_msr(vcpu) & MSR_FP) kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP); } @@ -427,8 +436,8 @@ static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte) /* patch dcbz into reserved instruction, so we trap */ for (i=hpage_offset; i < hpage_offset + (HW_PAGE_SIZE / 4); i++) - if ((page[i] & 0xff0007ff) == INS_DCBZ) - page[i] &= 0xfffffff7; + if ((be32_to_cpu(page[i]) & 0xff0007ff) == INS_DCBZ) + page[i] &= cpu_to_be32(0xfffffff7); kunmap_atomic(page); put_page(hpage); @@ -438,7 +447,7 @@ static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn) { ulong mp_pa = vcpu->arch.magic_page_pa; - if (!(vcpu->arch.shared->msr & MSR_SF)) + if (!(kvmppc_get_msr(vcpu) & MSR_SF)) mp_pa = (uint32_t)mp_pa; if (unlikely(mp_pa) && @@ -459,8 +468,8 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu, int page_found = 0; struct kvmppc_pte pte; bool is_mmio = false; - bool dr = (vcpu->arch.shared->msr & MSR_DR) ? true : false; - bool ir = (vcpu->arch.shared->msr & MSR_IR) ? true : false; + bool dr = (kvmppc_get_msr(vcpu) & MSR_DR) ? true : false; + bool ir = (kvmppc_get_msr(vcpu) & MSR_IR) ? true : false; u64 vsid; relocated = data ? dr : ir; @@ -480,7 +489,7 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu, pte.page_size = MMU_PAGE_64K; } - switch (vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) { + switch (kvmppc_get_msr(vcpu) & (MSR_DR|MSR_IR)) { case 0: pte.vpage |= ((u64)VSID_REAL << (SID_SHIFT - 12)); break; @@ -488,7 +497,7 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu, case MSR_IR: vcpu->arch.mmu.esid_to_vsid(vcpu, eaddr >> SID_SHIFT, &vsid); - if ((vcpu->arch.shared->msr & (MSR_DR|MSR_IR)) == MSR_DR) + if ((kvmppc_get_msr(vcpu) & (MSR_DR|MSR_IR)) == MSR_DR) pte.vpage |= ((u64)VSID_REAL_DR << (SID_SHIFT - 12)); else pte.vpage |= ((u64)VSID_REAL_IR << (SID_SHIFT - 12)); @@ -511,22 +520,25 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu, if (page_found == -ENOENT) { /* Page not found in guest PTE entries */ - vcpu->arch.shared->dar = kvmppc_get_fault_dar(vcpu); - vcpu->arch.shared->dsisr = vcpu->arch.fault_dsisr; - vcpu->arch.shared->msr |= - vcpu->arch.shadow_srr1 & 0x00000000f8000000ULL; + u64 ssrr1 = vcpu->arch.shadow_srr1; + u64 msr = kvmppc_get_msr(vcpu); + kvmppc_set_dar(vcpu, kvmppc_get_fault_dar(vcpu)); + kvmppc_set_dsisr(vcpu, vcpu->arch.fault_dsisr); + kvmppc_set_msr_fast(vcpu, msr | (ssrr1 & 0xf8000000ULL)); kvmppc_book3s_queue_irqprio(vcpu, vec); } else if (page_found == -EPERM) { /* Storage protection */ - vcpu->arch.shared->dar = kvmppc_get_fault_dar(vcpu); - vcpu->arch.shared->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE; - vcpu->arch.shared->dsisr |= DSISR_PROTFAULT; - vcpu->arch.shared->msr |= - vcpu->arch.shadow_srr1 & 0x00000000f8000000ULL; + u32 dsisr = vcpu->arch.fault_dsisr; + u64 ssrr1 = vcpu->arch.shadow_srr1; + u64 msr = kvmppc_get_msr(vcpu); + kvmppc_set_dar(vcpu, kvmppc_get_fault_dar(vcpu)); + dsisr = (dsisr & ~DSISR_NOHPTE) | DSISR_PROTFAULT; + kvmppc_set_dsisr(vcpu, dsisr); + kvmppc_set_msr_fast(vcpu, msr | (ssrr1 & 0xf8000000ULL)); kvmppc_book3s_queue_irqprio(vcpu, vec); } else if (page_found == -EINVAL) { /* Page not found in guest SLB */ - vcpu->arch.shared->dar = kvmppc_get_fault_dar(vcpu); + kvmppc_set_dar(vcpu, kvmppc_get_fault_dar(vcpu)); kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80); } else if (!is_mmio && kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) { @@ -606,6 +618,25 @@ void kvmppc_giveup_ext(struct kvm_vcpu *vcpu, ulong msr) kvmppc_recalc_shadow_msr(vcpu); } +/* Give up facility (TAR / EBB / DSCR) */ +static void kvmppc_giveup_fac(struct kvm_vcpu *vcpu, ulong fac) +{ +#ifdef CONFIG_PPC_BOOK3S_64 + if (!(vcpu->arch.shadow_fscr & (1ULL << fac))) { + /* Facility not available to the guest, ignore giveup request*/ + return; + } + + switch (fac) { + case FSCR_TAR_LG: + vcpu->arch.tar = mfspr(SPRN_TAR); + mtspr(SPRN_TAR, current->thread.tar); + vcpu->arch.shadow_fscr &= ~FSCR_TAR; + break; + } +#endif +} + static int kvmppc_read_inst(struct kvm_vcpu *vcpu) { ulong srr0 = kvmppc_get_pc(vcpu); @@ -614,11 +645,12 @@ static int kvmppc_read_inst(struct kvm_vcpu *vcpu) ret = kvmppc_ld(vcpu, &srr0, sizeof(u32), &last_inst, false); if (ret == -ENOENT) { - ulong msr = vcpu->arch.shared->msr; + ulong msr = kvmppc_get_msr(vcpu); msr = kvmppc_set_field(msr, 33, 33, 1); msr = kvmppc_set_field(msr, 34, 36, 0); - vcpu->arch.shared->msr = kvmppc_set_field(msr, 42, 47, 0); + msr = kvmppc_set_field(msr, 42, 47, 0); + kvmppc_set_msr_fast(vcpu, msr); kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_INST_STORAGE); return EMULATE_AGAIN; } @@ -651,7 +683,7 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr, if (vcpu->arch.hflags & BOOK3S_HFLAG_PAIRED_SINGLE) return RESUME_GUEST; - if (!(vcpu->arch.shared->msr & msr)) { + if (!(kvmppc_get_msr(vcpu) & msr)) { kvmppc_book3s_queue_irqprio(vcpu, exit_nr); return RESUME_GUEST; } @@ -683,16 +715,20 @@ static int kvmppc_handle_ext(struct kvm_vcpu *vcpu, unsigned int exit_nr, #endif if (msr & MSR_FP) { + preempt_disable(); enable_kernel_fp(); load_fp_state(&vcpu->arch.fp); t->fp_save_area = &vcpu->arch.fp; + preempt_enable(); } if (msr & MSR_VEC) { #ifdef CONFIG_ALTIVEC + preempt_disable(); enable_kernel_altivec(); load_vr_state(&vcpu->arch.vr); t->vr_save_area = &vcpu->arch.vr; + preempt_enable(); #endif } @@ -716,18 +752,90 @@ static void kvmppc_handle_lost_ext(struct kvm_vcpu *vcpu) return; if (lost_ext & MSR_FP) { + preempt_disable(); enable_kernel_fp(); load_fp_state(&vcpu->arch.fp); + preempt_enable(); } #ifdef CONFIG_ALTIVEC if (lost_ext & MSR_VEC) { + preempt_disable(); enable_kernel_altivec(); load_vr_state(&vcpu->arch.vr); + preempt_enable(); } #endif current->thread.regs->msr |= lost_ext; } +#ifdef CONFIG_PPC_BOOK3S_64 + +static void kvmppc_trigger_fac_interrupt(struct kvm_vcpu *vcpu, ulong fac) +{ + /* Inject the Interrupt Cause field and trigger a guest interrupt */ + vcpu->arch.fscr &= ~(0xffULL << 56); + vcpu->arch.fscr |= (fac << 56); + kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_FAC_UNAVAIL); +} + +static void kvmppc_emulate_fac(struct kvm_vcpu *vcpu, ulong fac) +{ + enum emulation_result er = EMULATE_FAIL; + + if (!(kvmppc_get_msr(vcpu) & MSR_PR)) + er = kvmppc_emulate_instruction(vcpu->run, vcpu); + + if ((er != EMULATE_DONE) && (er != EMULATE_AGAIN)) { + /* Couldn't emulate, trigger interrupt in guest */ + kvmppc_trigger_fac_interrupt(vcpu, fac); + } +} + +/* Enable facilities (TAR, EBB, DSCR) for the guest */ +static int kvmppc_handle_fac(struct kvm_vcpu *vcpu, ulong fac) +{ + bool guest_fac_enabled; + BUG_ON(!cpu_has_feature(CPU_FTR_ARCH_207S)); + + /* + * Not every facility is enabled by FSCR bits, check whether the + * guest has this facility enabled at all. + */ + switch (fac) { + case FSCR_TAR_LG: + case FSCR_EBB_LG: + guest_fac_enabled = (vcpu->arch.fscr & (1ULL << fac)); + break; + case FSCR_TM_LG: + guest_fac_enabled = kvmppc_get_msr(vcpu) & MSR_TM; + break; + default: + guest_fac_enabled = false; + break; + } + + if (!guest_fac_enabled) { + /* Facility not enabled by the guest */ + kvmppc_trigger_fac_interrupt(vcpu, fac); + return RESUME_GUEST; + } + + switch (fac) { + case FSCR_TAR_LG: + /* TAR switching isn't lazy in Linux yet */ + current->thread.tar = mfspr(SPRN_TAR); + mtspr(SPRN_TAR, vcpu->arch.tar); + vcpu->arch.shadow_fscr |= FSCR_TAR; + break; + default: + kvmppc_emulate_fac(vcpu, fac); + break; + } + + return RESUME_GUEST; +} +#endif + int kvmppc_handle_exit_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, unsigned int exit_nr) { @@ -784,7 +892,9 @@ int kvmppc_handle_exit_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, kvmppc_mmu_pte_flush(vcpu, kvmppc_get_pc(vcpu), ~0xFFFUL); r = RESUME_GUEST; } else { - vcpu->arch.shared->msr |= shadow_srr1 & 0x58000000; + u64 msr = kvmppc_get_msr(vcpu); + msr |= shadow_srr1 & 0x58000000; + kvmppc_set_msr_fast(vcpu, msr); kvmppc_book3s_queue_irqprio(vcpu, exit_nr); r = RESUME_GUEST; } @@ -824,8 +934,8 @@ int kvmppc_handle_exit_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, r = kvmppc_handle_pagefault(run, vcpu, dar, exit_nr); srcu_read_unlock(&vcpu->kvm->srcu, idx); } else { - vcpu->arch.shared->dar = dar; - vcpu->arch.shared->dsisr = fault_dsisr; + kvmppc_set_dar(vcpu, dar); + kvmppc_set_dsisr(vcpu, fault_dsisr); kvmppc_book3s_queue_irqprio(vcpu, exit_nr); r = RESUME_GUEST; } @@ -833,7 +943,7 @@ int kvmppc_handle_exit_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, } case BOOK3S_INTERRUPT_DATA_SEGMENT: if (kvmppc_mmu_map_segment(vcpu, kvmppc_get_fault_dar(vcpu)) < 0) { - vcpu->arch.shared->dar = kvmppc_get_fault_dar(vcpu); + kvmppc_set_dar(vcpu, kvmppc_get_fault_dar(vcpu)); kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DATA_SEGMENT); } @@ -871,7 +981,7 @@ int kvmppc_handle_exit_pr(struct kvm_run *run, struct kvm_vcpu *vcpu, program_interrupt: flags = vcpu->arch.shadow_srr1 & 0x1f0000ull; - if (vcpu->arch.shared->msr & MSR_PR) { + if (kvmppc_get_msr(vcpu) & MSR_PR) { #ifdef EXIT_DEBUG printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", kvmppc_get_pc(vcpu), kvmppc_get_last_inst(vcpu)); #endif @@ -913,7 +1023,7 @@ program_interrupt: case BOOK3S_INTERRUPT_SYSCALL: if (vcpu->arch.papr_enabled && (kvmppc_get_last_sc(vcpu) == 0x44000022) && - !(vcpu->arch.shared->msr & MSR_PR)) { + !(kvmppc_get_msr(vcpu) & MSR_PR)) { /* SC 1 papr hypercalls */ ulong cmd = kvmppc_get_gpr(vcpu, 3); int i; @@ -945,7 +1055,7 @@ program_interrupt: gprs[i] = kvmppc_get_gpr(vcpu, i); vcpu->arch.osi_needed = 1; r = RESUME_HOST_NV; - } else if (!(vcpu->arch.shared->msr & MSR_PR) && + } else if (!(kvmppc_get_msr(vcpu) & MSR_PR) && (((u32)kvmppc_get_gpr(vcpu, 0)) == KVM_SC_MAGIC_R0)) { /* KVM PV hypercalls */ kvmppc_set_gpr(vcpu, 3, kvmppc_kvm_pv(vcpu)); @@ -986,14 +1096,26 @@ program_interrupt: } case BOOK3S_INTERRUPT_ALIGNMENT: if (kvmppc_read_inst(vcpu) == EMULATE_DONE) { - vcpu->arch.shared->dsisr = kvmppc_alignment_dsisr(vcpu, - kvmppc_get_last_inst(vcpu)); - vcpu->arch.shared->dar = kvmppc_alignment_dar(vcpu, - kvmppc_get_last_inst(vcpu)); + u32 last_inst = kvmppc_get_last_inst(vcpu); + u32 dsisr; + u64 dar; + + dsisr = kvmppc_alignment_dsisr(vcpu, last_inst); + dar = kvmppc_alignment_dar(vcpu, last_inst); + + kvmppc_set_dsisr(vcpu, dsisr); + kvmppc_set_dar(vcpu, dar); + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); } r = RESUME_GUEST; break; +#ifdef CONFIG_PPC_BOOK3S_64 + case BOOK3S_INTERRUPT_FAC_UNAVAIL: + kvmppc_handle_fac(vcpu, vcpu->arch.shadow_fscr >> 56); + r = RESUME_GUEST; + break; +#endif case BOOK3S_INTERRUPT_MACHINE_CHECK: case BOOK3S_INTERRUPT_TRACE: kvmppc_book3s_queue_irqprio(vcpu, exit_nr); @@ -1054,7 +1176,7 @@ static int kvm_arch_vcpu_ioctl_get_sregs_pr(struct kvm_vcpu *vcpu, } } else { for (i = 0; i < 16; i++) - sregs->u.s.ppc32.sr[i] = vcpu->arch.shared->sr[i]; + sregs->u.s.ppc32.sr[i] = kvmppc_get_sr(vcpu, i); for (i = 0; i < 8; i++) { sregs->u.s.ppc32.ibat[i] = vcpu3s->ibat[i].raw; @@ -1110,6 +1232,15 @@ static int kvmppc_get_one_reg_pr(struct kvm_vcpu *vcpu, u64 id, case KVM_REG_PPC_HIOR: *val = get_reg_val(id, to_book3s(vcpu)->hior); break; + case KVM_REG_PPC_LPCR: + /* + * We are only interested in the LPCR_ILE bit + */ + if (vcpu->arch.intr_msr & MSR_LE) + *val = get_reg_val(id, LPCR_ILE); + else + *val = get_reg_val(id, 0); + break; default: r = -EINVAL; break; @@ -1118,6 +1249,14 @@ static int kvmppc_get_one_reg_pr(struct kvm_vcpu *vcpu, u64 id, return r; } +static void kvmppc_set_lpcr_pr(struct kvm_vcpu *vcpu, u64 new_lpcr) +{ + if (new_lpcr & LPCR_ILE) + vcpu->arch.intr_msr |= MSR_LE; + else + vcpu->arch.intr_msr &= ~MSR_LE; +} + static int kvmppc_set_one_reg_pr(struct kvm_vcpu *vcpu, u64 id, union kvmppc_one_reg *val) { @@ -1128,6 +1267,9 @@ static int kvmppc_set_one_reg_pr(struct kvm_vcpu *vcpu, u64 id, to_book3s(vcpu)->hior = set_reg_val(id, *val); to_book3s(vcpu)->hior_explicit = true; break; + case KVM_REG_PPC_LPCR: + kvmppc_set_lpcr_pr(vcpu, set_reg_val(id, *val)); + break; default: r = -EINVAL; break; @@ -1153,7 +1295,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm, goto free_vcpu; vcpu->arch.book3s = vcpu_book3s; -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER vcpu->arch.shadow_vcpu = kzalloc(sizeof(*vcpu->arch.shadow_vcpu), GFP_KERNEL); if (!vcpu->arch.shadow_vcpu) @@ -1170,8 +1312,14 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm, goto uninit_vcpu; /* the real shared page fills the last 4k of our page */ vcpu->arch.shared = (void *)(p + PAGE_SIZE - 4096); - #ifdef CONFIG_PPC_BOOK3S_64 + /* Always start the shared struct in native endian mode */ +#ifdef __BIG_ENDIAN__ + vcpu->arch.shared_big_endian = true; +#else + vcpu->arch.shared_big_endian = false; +#endif + /* * Default to the same as the host if we're on sufficiently * recent machine that we have 1TB segments; @@ -1180,6 +1328,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm, vcpu->arch.pvr = 0x3C0301; if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) vcpu->arch.pvr = mfspr(SPRN_PVR); + vcpu->arch.intr_msr = MSR_SF; #else /* default to book3s_32 (750) */ vcpu->arch.pvr = 0x84202; @@ -1187,7 +1336,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm, kvmppc_set_pvr_pr(vcpu, vcpu->arch.pvr); vcpu->arch.slb_nr = 64; - vcpu->arch.shadow_msr = MSR_USER64; + vcpu->arch.shadow_msr = MSR_USER64 & ~MSR_LE; err = kvmppc_mmu_init(vcpu); if (err < 0) @@ -1198,7 +1347,7 @@ static struct kvm_vcpu *kvmppc_core_vcpu_create_pr(struct kvm *kvm, uninit_vcpu: kvm_vcpu_uninit(vcpu); free_shadow_vcpu: -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER kfree(vcpu->arch.shadow_vcpu); free_vcpu3s: #endif @@ -1215,7 +1364,7 @@ static void kvmppc_core_vcpu_free_pr(struct kvm_vcpu *vcpu) free_page((unsigned long)vcpu->arch.shared & PAGE_MASK); kvm_vcpu_uninit(vcpu); -#ifdef CONFIG_KVM_BOOK3S_32 +#ifdef CONFIG_KVM_BOOK3S_32_HANDLER kfree(vcpu->arch.shadow_vcpu); #endif vfree(vcpu_book3s); @@ -1264,7 +1413,7 @@ static int kvmppc_vcpu_run_pr(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) #endif /* Preload FPU if it's enabled */ - if (vcpu->arch.shared->msr & MSR_FP) + if (kvmppc_get_msr(vcpu) & MSR_FP) kvmppc_handle_ext(vcpu, BOOK3S_INTERRUPT_FP_UNAVAIL, MSR_FP); kvmppc_fix_ee_before_entry(); @@ -1277,6 +1426,9 @@ static int kvmppc_vcpu_run_pr(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) /* Make sure we save the guest FPU/Altivec/VSX state */ kvmppc_giveup_ext(vcpu, MSR_FP | MSR_VEC | MSR_VSX); + /* Make sure we save the guest TAR/EBB/DSCR state */ + kvmppc_giveup_fac(vcpu, FSCR_TAR_LG); + out: vcpu->mode = OUTSIDE_GUEST_MODE; return ret; diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index 5efa97b993d8..52a63bfe3f07 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -57,7 +57,7 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu) for (i = 0; ; ++i) { if (i == 8) goto done; - if ((*hpte & HPTE_V_VALID) == 0) + if ((be64_to_cpu(*hpte) & HPTE_V_VALID) == 0) break; hpte += 2; } @@ -67,8 +67,8 @@ static int kvmppc_h_pr_enter(struct kvm_vcpu *vcpu) goto done; } - hpte[0] = kvmppc_get_gpr(vcpu, 6); - hpte[1] = kvmppc_get_gpr(vcpu, 7); + hpte[0] = cpu_to_be64(kvmppc_get_gpr(vcpu, 6)); + hpte[1] = cpu_to_be64(kvmppc_get_gpr(vcpu, 7)); pteg_addr += i * HPTE_SIZE; copy_to_user((void __user *)pteg_addr, hpte, HPTE_SIZE); kvmppc_set_gpr(vcpu, 4, pte_index | i); @@ -93,6 +93,8 @@ static int kvmppc_h_pr_remove(struct kvm_vcpu *vcpu) pteg = get_pteg_addr(vcpu, pte_index); mutex_lock(&vcpu->kvm->arch.hpt_mutex); copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + pte[0] = be64_to_cpu(pte[0]); + pte[1] = be64_to_cpu(pte[1]); ret = H_NOT_FOUND; if ((pte[0] & HPTE_V_VALID) == 0 || @@ -169,6 +171,8 @@ static int kvmppc_h_pr_bulk_remove(struct kvm_vcpu *vcpu) pteg = get_pteg_addr(vcpu, tsh & H_BULK_REMOVE_PTEX); copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + pte[0] = be64_to_cpu(pte[0]); + pte[1] = be64_to_cpu(pte[1]); /* tsl = AVPN */ flags = (tsh & H_BULK_REMOVE_FLAGS) >> 26; @@ -207,6 +211,8 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu) pteg = get_pteg_addr(vcpu, pte_index); mutex_lock(&vcpu->kvm->arch.hpt_mutex); copy_from_user(pte, (void __user *)pteg, sizeof(pte)); + pte[0] = be64_to_cpu(pte[0]); + pte[1] = be64_to_cpu(pte[1]); ret = H_NOT_FOUND; if ((pte[0] & HPTE_V_VALID) == 0 || @@ -225,6 +231,8 @@ static int kvmppc_h_pr_protect(struct kvm_vcpu *vcpu) rb = compute_tlbie_rb(v, r, pte_index); vcpu->arch.mmu.tlbie(vcpu, rb, rb & 1 ? true : false); + pte[0] = cpu_to_be64(pte[0]); + pte[1] = cpu_to_be64(pte[1]); copy_to_user((void __user *)pteg, pte, sizeof(pte)); ret = H_SUCCESS; @@ -270,7 +278,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_PUT_TCE: return kvmppc_h_pr_put_tce(vcpu); case H_CEDE: - vcpu->arch.shared->msr |= MSR_EE; + kvmppc_set_msr_fast(vcpu, kvmppc_get_msr(vcpu) | MSR_EE); kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); vcpu->stat.halt_wakeup++; diff --git a/arch/powerpc/kvm/book3s_rtas.c b/arch/powerpc/kvm/book3s_rtas.c index 7a053157483b..edb14ba992b3 100644 --- a/arch/powerpc/kvm/book3s_rtas.c +++ b/arch/powerpc/kvm/book3s_rtas.c @@ -205,6 +205,32 @@ int kvm_vm_ioctl_rtas_define_token(struct kvm *kvm, void __user *argp) return rc; } +static void kvmppc_rtas_swap_endian_in(struct rtas_args *args) +{ +#ifdef __LITTLE_ENDIAN__ + int i; + + args->token = be32_to_cpu(args->token); + args->nargs = be32_to_cpu(args->nargs); + args->nret = be32_to_cpu(args->nret); + for (i = 0; i < args->nargs; i++) + args->args[i] = be32_to_cpu(args->args[i]); +#endif +} + +static void kvmppc_rtas_swap_endian_out(struct rtas_args *args) +{ +#ifdef __LITTLE_ENDIAN__ + int i; + + for (i = 0; i < args->nret; i++) + args->args[i] = cpu_to_be32(args->args[i]); + args->token = cpu_to_be32(args->token); + args->nargs = cpu_to_be32(args->nargs); + args->nret = cpu_to_be32(args->nret); +#endif +} + int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu) { struct rtas_token_definition *d; @@ -223,6 +249,8 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu) if (rc) goto fail; + kvmppc_rtas_swap_endian_in(&args); + /* * args->rets is a pointer into args->args. Now that we've * copied args we need to fix it up to point into our copy, @@ -247,6 +275,7 @@ int kvmppc_rtas_hcall(struct kvm_vcpu *vcpu) if (rc == 0) { args.rets = orig_rets; + kvmppc_rtas_swap_endian_out(&args); rc = kvm_write_guest(vcpu->kvm, args_phys, &args, sizeof(args)); if (rc) goto fail; diff --git a/arch/powerpc/kvm/book3s_segment.S b/arch/powerpc/kvm/book3s_segment.S index 1e0cc2adfd40..acee37cde840 100644 --- a/arch/powerpc/kvm/book3s_segment.S +++ b/arch/powerpc/kvm/book3s_segment.S @@ -90,6 +90,15 @@ kvmppc_handler_trampoline_enter: LOAD_GUEST_SEGMENTS #ifdef CONFIG_PPC_BOOK3S_64 +BEGIN_FTR_SECTION + /* Save host FSCR */ + mfspr r8, SPRN_FSCR + std r8, HSTATE_HOST_FSCR(r13) + /* Set FSCR during guest execution */ + ld r9, SVCPU_SHADOW_FSCR(r13) + mtspr SPRN_FSCR, r9 +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) + /* Some guests may need to have dcbz set to 32 byte length. * * Usually we ensure that by patching the guest's instructions @@ -255,6 +264,10 @@ BEGIN_FTR_SECTION cmpwi r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST beq- ld_last_inst END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) +BEGIN_FTR_SECTION + cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL + beq- ld_last_inst +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif b no_ld_last_inst @@ -311,6 +324,18 @@ no_ld_last_inst: no_dcbz32_off: +BEGIN_FTR_SECTION + /* Save guest FSCR on a FAC_UNAVAIL interrupt */ + cmpwi r12, BOOK3S_INTERRUPT_FAC_UNAVAIL + bne+ no_fscr_save + mfspr r7, SPRN_FSCR + std r7, SVCPU_SHADOW_FSCR(r13) +no_fscr_save: + /* Restore host FSCR */ + ld r8, HSTATE_HOST_FSCR(r13) + mtspr SPRN_FSCR, r8 +END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) + #endif /* CONFIG_PPC_BOOK3S_64 */ /* diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c index 89b7f821f6c4..002d51764143 100644 --- a/arch/powerpc/kvm/e500_emulate.c +++ b/arch/powerpc/kvm/e500_emulate.c @@ -19,6 +19,7 @@ #include "booke.h" #include "e500.h" +#define XOP_DCBTLS 166 #define XOP_MSGSND 206 #define XOP_MSGCLR 238 #define XOP_TLBIVAX 786 @@ -103,6 +104,15 @@ static int kvmppc_e500_emul_ehpriv(struct kvm_run *run, struct kvm_vcpu *vcpu, return emulated; } +static int kvmppc_e500_emul_dcbtls(struct kvm_vcpu *vcpu) +{ + struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); + + /* Always fail to lock the cache */ + vcpu_e500->l1csr0 |= L1CSR0_CUL; + return EMULATE_DONE; +} + int kvmppc_core_emulate_op_e500(struct kvm_run *run, struct kvm_vcpu *vcpu, unsigned int inst, int *advance) { @@ -116,6 +126,10 @@ int kvmppc_core_emulate_op_e500(struct kvm_run *run, struct kvm_vcpu *vcpu, case 31: switch (get_xop(inst)) { + case XOP_DCBTLS: + emulated = kvmppc_e500_emul_dcbtls(vcpu); + break; + #ifdef CONFIG_KVM_E500MC case XOP_MSGSND: emulated = kvmppc_e500_emul_msgsnd(vcpu, rb); @@ -222,6 +236,7 @@ int kvmppc_core_emulate_mtspr_e500(struct kvm_vcpu *vcpu, int sprn, ulong spr_va break; case SPRN_L1CSR1: vcpu_e500->l1csr1 = spr_val; + vcpu_e500->l1csr1 &= ~(L1CSR1_ICFI | L1CSR1_ICLFR); break; case SPRN_HID0: vcpu_e500->hid0 = spr_val; diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index c2b887be2c29..da86d9ba3476 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -97,10 +97,10 @@ static int kvmppc_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs) switch (sprn) { case SPRN_SRR0: - vcpu->arch.shared->srr0 = spr_val; + kvmppc_set_srr0(vcpu, spr_val); break; case SPRN_SRR1: - vcpu->arch.shared->srr1 = spr_val; + kvmppc_set_srr1(vcpu, spr_val); break; /* XXX We need to context-switch the timebase for @@ -114,16 +114,16 @@ static int kvmppc_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs) break; case SPRN_SPRG0: - vcpu->arch.shared->sprg0 = spr_val; + kvmppc_set_sprg0(vcpu, spr_val); break; case SPRN_SPRG1: - vcpu->arch.shared->sprg1 = spr_val; + kvmppc_set_sprg1(vcpu, spr_val); break; case SPRN_SPRG2: - vcpu->arch.shared->sprg2 = spr_val; + kvmppc_set_sprg2(vcpu, spr_val); break; case SPRN_SPRG3: - vcpu->arch.shared->sprg3 = spr_val; + kvmppc_set_sprg3(vcpu, spr_val); break; /* PIR can legally be written, but we ignore it */ @@ -150,10 +150,10 @@ static int kvmppc_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt) switch (sprn) { case SPRN_SRR0: - spr_val = vcpu->arch.shared->srr0; + spr_val = kvmppc_get_srr0(vcpu); break; case SPRN_SRR1: - spr_val = vcpu->arch.shared->srr1; + spr_val = kvmppc_get_srr1(vcpu); break; case SPRN_PVR: spr_val = vcpu->arch.pvr; @@ -173,16 +173,16 @@ static int kvmppc_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt) break; case SPRN_SPRG0: - spr_val = vcpu->arch.shared->sprg0; + spr_val = kvmppc_get_sprg0(vcpu); break; case SPRN_SPRG1: - spr_val = vcpu->arch.shared->sprg1; + spr_val = kvmppc_get_sprg1(vcpu); break; case SPRN_SPRG2: - spr_val = vcpu->arch.shared->sprg2; + spr_val = kvmppc_get_sprg2(vcpu); break; case SPRN_SPRG3: - spr_val = vcpu->arch.shared->sprg3; + spr_val = kvmppc_get_sprg3(vcpu); break; /* Note: SPRG4-7 are user-readable, so we don't get * a trap. */ diff --git a/arch/powerpc/kvm/mpic.c b/arch/powerpc/kvm/mpic.c index efbd9962a209..b68d0dc9479a 100644 --- a/arch/powerpc/kvm/mpic.c +++ b/arch/powerpc/kvm/mpic.c @@ -126,6 +126,8 @@ static int openpic_cpu_write_internal(void *opaque, gpa_t addr, u32 val, int idx); static int openpic_cpu_read_internal(void *opaque, gpa_t addr, u32 *ptr, int idx); +static inline void write_IRQreg_idr(struct openpic *opp, int n_IRQ, + uint32_t val); enum irq_type { IRQ_TYPE_NORMAL = 0, @@ -528,7 +530,6 @@ static void openpic_reset(struct openpic *opp) /* Initialise IRQ sources */ for (i = 0; i < opp->max_irq; i++) { opp->src[i].ivpr = opp->ivpr_reset; - opp->src[i].idr = opp->idr_reset; switch (opp->src[i].type) { case IRQ_TYPE_NORMAL: @@ -543,6 +544,8 @@ static void openpic_reset(struct openpic *opp) case IRQ_TYPE_FSLSPECIAL: break; } + + write_IRQreg_idr(opp, i, opp->idr_reset); } /* Initialise IRQ destinations */ for (i = 0; i < MAX_CPU; i++) { diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 3cf541a53e2a..bab20f410443 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -125,6 +125,27 @@ int kvmppc_prepare_to_enter(struct kvm_vcpu *vcpu) } EXPORT_SYMBOL_GPL(kvmppc_prepare_to_enter); +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) +static void kvmppc_swab_shared(struct kvm_vcpu *vcpu) +{ + struct kvm_vcpu_arch_shared *shared = vcpu->arch.shared; + int i; + + shared->sprg0 = swab64(shared->sprg0); + shared->sprg1 = swab64(shared->sprg1); + shared->sprg2 = swab64(shared->sprg2); + shared->sprg3 = swab64(shared->sprg3); + shared->srr0 = swab64(shared->srr0); + shared->srr1 = swab64(shared->srr1); + shared->dar = swab64(shared->dar); + shared->msr = swab64(shared->msr); + shared->dsisr = swab32(shared->dsisr); + shared->int_pending = swab32(shared->int_pending); + for (i = 0; i < ARRAY_SIZE(shared->sr); i++) + shared->sr[i] = swab32(shared->sr[i]); +} +#endif + int kvmppc_kvm_pv(struct kvm_vcpu *vcpu) { int nr = kvmppc_get_gpr(vcpu, 11); @@ -135,7 +156,7 @@ int kvmppc_kvm_pv(struct kvm_vcpu *vcpu) unsigned long __maybe_unused param4 = kvmppc_get_gpr(vcpu, 6); unsigned long r2 = 0; - if (!(vcpu->arch.shared->msr & MSR_SF)) { + if (!(kvmppc_get_msr(vcpu) & MSR_SF)) { /* 32 bit mode */ param1 &= 0xffffffff; param2 &= 0xffffffff; @@ -146,8 +167,28 @@ int kvmppc_kvm_pv(struct kvm_vcpu *vcpu) switch (nr) { case KVM_HCALL_TOKEN(KVM_HC_PPC_MAP_MAGIC_PAGE): { - vcpu->arch.magic_page_pa = param1; - vcpu->arch.magic_page_ea = param2; +#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_KVM_BOOK3S_PR_POSSIBLE) + /* Book3S can be little endian, find it out here */ + int shared_big_endian = true; + if (vcpu->arch.intr_msr & MSR_LE) + shared_big_endian = false; + if (shared_big_endian != vcpu->arch.shared_big_endian) + kvmppc_swab_shared(vcpu); + vcpu->arch.shared_big_endian = shared_big_endian; +#endif + + if (!(param2 & MAGIC_PAGE_FLAG_NOT_MAPPED_NX)) { + /* + * Older versions of the Linux magic page code had + * a bug where they would map their trampoline code + * NX. If that's the case, remove !PR NX capability. + */ + vcpu->arch.disable_kernel_nx = true; + kvm_make_request(KVM_REQ_TLB_FLUSH, vcpu); + } + + vcpu->arch.magic_page_pa = param1 & ~0xfffULL; + vcpu->arch.magic_page_ea = param2 & ~0xfffULL; r2 = KVM_MAGIC_FEAT_SR | KVM_MAGIC_FEAT_MAS0_TO_SPRG7; @@ -375,6 +416,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_SPAPR_TCE: case KVM_CAP_PPC_ALLOC_HTAB: case KVM_CAP_PPC_RTAS: + case KVM_CAP_PPC_FIXUP_HCALL: #ifdef CONFIG_KVM_XICS case KVM_CAP_IRQ_XICS: #endif @@ -1015,10 +1057,10 @@ static int kvm_vm_ioctl_get_pvinfo(struct kvm_ppc_pvinfo *pvinfo) u32 inst_nop = 0x60000000; #ifdef CONFIG_KVM_BOOKE_HV u32 inst_sc1 = 0x44000022; - pvinfo->hcall[0] = inst_sc1; - pvinfo->hcall[1] = inst_nop; - pvinfo->hcall[2] = inst_nop; - pvinfo->hcall[3] = inst_nop; + pvinfo->hcall[0] = cpu_to_be32(inst_sc1); + pvinfo->hcall[1] = cpu_to_be32(inst_nop); + pvinfo->hcall[2] = cpu_to_be32(inst_nop); + pvinfo->hcall[3] = cpu_to_be32(inst_nop); #else u32 inst_lis = 0x3c000000; u32 inst_ori = 0x60000000; @@ -1034,10 +1076,10 @@ static int kvm_vm_ioctl_get_pvinfo(struct kvm_ppc_pvinfo *pvinfo) * sc * nop */ - pvinfo->hcall[0] = inst_lis | ((KVM_SC_MAGIC_R0 >> 16) & inst_imm_mask); - pvinfo->hcall[1] = inst_ori | (KVM_SC_MAGIC_R0 & inst_imm_mask); - pvinfo->hcall[2] = inst_sc; - pvinfo->hcall[3] = inst_nop; + pvinfo->hcall[0] = cpu_to_be32(inst_lis | ((KVM_SC_MAGIC_R0 >> 16) & inst_imm_mask)); + pvinfo->hcall[1] = cpu_to_be32(inst_ori | (KVM_SC_MAGIC_R0 & inst_imm_mask)); + pvinfo->hcall[2] = cpu_to_be32(inst_sc); + pvinfo->hcall[3] = cpu_to_be32(inst_nop); #endif pvinfo->flags = KVM_PPC_PVINFO_FLAGS_EV_IDLE; diff --git a/arch/powerpc/kvm/trace_pr.h b/arch/powerpc/kvm/trace_pr.h index 8b22e4748344..e1357cd8dc1f 100644 --- a/arch/powerpc/kvm/trace_pr.h +++ b/arch/powerpc/kvm/trace_pr.h @@ -255,7 +255,7 @@ TRACE_EVENT(kvm_exit, __entry->exit_nr = exit_nr; __entry->pc = kvmppc_get_pc(vcpu); __entry->dar = kvmppc_get_fault_dar(vcpu); - __entry->msr = vcpu->arch.shared->msr; + __entry->msr = kvmppc_get_msr(vcpu); __entry->srr1 = vcpu->arch.shadow_srr1; __entry->last_inst = vcpu->arch.last_inst; ), diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index d766d6ee33fe..350aa58a6f95 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -207,6 +207,10 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, if (overlaps_kernel_text(vaddr, vaddr + step)) tprot &= ~HPTE_R_N; + /* Make kvm guest trampolines executable */ + if (overlaps_kvm_tmp(vaddr, vaddr + step)) + tprot &= ~HPTE_R_N; + /* * If relocatable, check if it overlaps interrupt vectors that * are copied down to real 0. For relocatable kernel @@ -265,9 +269,9 @@ static int __init htab_dt_scan_seg_sizes(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - __be32 *prop; - unsigned long size = 0; + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *prop; + int size = 0; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -320,9 +324,9 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - __be32 *prop; - unsigned long size = 0; + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *prop; + int size = 0; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) @@ -402,9 +406,9 @@ static int __init htab_dt_scan_page_sizes(unsigned long node, static int __init htab_dt_scan_hugepage_blocks(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - __be64 *addr_prop; - __be32 *page_count_prop; + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be64 *addr_prop; + const __be32 *page_count_prop; unsigned int expected_pages; long unsigned int phys_addr; long unsigned int block_size; @@ -546,8 +550,8 @@ static int __init htab_dt_scan_pftsize(unsigned long node, const char *uname, int depth, void *data) { - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - __be32 *prop; + const char *type = of_get_flat_dt_prop(node, "device_type", NULL); + const __be32 *prop; /* We are scanning "cpu" nodes only */ if (type == NULL || strcmp(type, "cpu") != 0) diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index eb923654ba80..7e70ae968e5f 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -86,11 +86,6 @@ int pgd_huge(pgd_t pgd) */ return ((pgd_val(pgd) & 0x3) != 0x0); } - -int pmd_huge_support(void) -{ - return 1; -} #else int pmd_huge(pmd_t pmd) { @@ -106,11 +101,6 @@ int pgd_huge(pgd_t pgd) { return 0; } - -int pmd_huge_support(void) -{ - return 0; -} #endif pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index 9d1d33cd2be5..964a5f61488a 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -97,7 +97,7 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize, static void __slb_flush_and_rebolt(void) { /* If you change this make sure you change SLB_NUM_BOLTED - * appropriately too. */ + * and PR KVM appropriately too. */ unsigned long linear_llp, vmalloc_llp, lflags, vflags; unsigned long ksp_esid_data, ksp_vsid_data; diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index 18c104820198..6e19b0ad5d26 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -199,8 +199,8 @@ static void __init efika_setup_arch(void) static int __init efika_probe(void) { - char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), - "model", NULL); + const char *model = of_get_flat_dt_prop(of_get_flat_dt_root(), + "model", NULL); if (model == NULL) return 0; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index c665d7de6c99..7044fd36197b 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -574,8 +574,8 @@ chrp_init2(void) static int __init chrp_probe(void) { - char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), - "device_type", NULL); + const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); if (dtype == NULL) return 0; if (strcmp(dtype, "chrp")) diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 360ad80c754c..f343183add07 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -61,7 +61,7 @@ int __init early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data) { const void *basep, *entryp, *sizep; - unsigned long basesz, entrysz, runtimesz; + int basesz, entrysz, runtimesz; if (depth != 1 || strcmp(uname, "ibm,opal") != 0) return 0; @@ -77,11 +77,11 @@ int __init early_init_dt_scan_opal(unsigned long node, opal.entry = of_read_number(entryp, entrysz/4); opal.size = of_read_number(sizep, runtimesz/4); - pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%ld)\n", + pr_debug("OPAL Base = 0x%llx (basep=%p basesz=%d)\n", opal.base, basep, basesz); - pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%ld)\n", + pr_debug("OPAL Entry = 0x%llx (entryp=%p basesz=%d)\n", opal.entry, entryp, entrysz); - pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%ld)\n", + pr_debug("OPAL Entry = 0x%llx (sizep=%p runtimesz=%d)\n", opal.size, sizep, runtimesz); powerpc_firmware_features |= FW_FEATURE_OPAL; @@ -102,7 +102,7 @@ int __init early_init_dt_scan_opal(unsigned long node, int __init early_init_dt_scan_recoverable_ranges(unsigned long node, const char *uname, int depth, void *data) { - unsigned long i, psize, size; + int i, psize, size; const __be32 *prop; if (depth != 1 || strcmp(uname, "ibm,opal") != 0) @@ -359,7 +359,7 @@ int opal_get_chars(uint32_t vtermno, char *buf, int count) if ((be64_to_cpu(evt) & OPAL_EVENT_CONSOLE_INPUT) == 0) return 0; len = cpu_to_be64(count); - rc = opal_console_read(vtermno, &len, buf); + rc = opal_console_read(vtermno, &len, buf); if (rc == OPAL_SUCCESS) return be64_to_cpu(len); return 0; diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 2db8cc691bf4..099d2df976a2 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -665,7 +665,7 @@ static int __init pseries_probe_fw_features(unsigned long node, void *data) { const char *prop; - unsigned long len; + int len; static int hypertas_found; static int vec5_found; @@ -698,7 +698,7 @@ static int __init pseries_probe_fw_features(unsigned long node, static int __init pSeries_probe(void) { unsigned long root = of_get_flat_dt_root(); - char *dtype = of_get_flat_dt_prop(root, "device_type", NULL); + const char *dtype = of_get_flat_dt_prop(root, "device_type", NULL); if (dtype == NULL) return 0; diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 1bd0eba4d355..e9056e438575 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -152,9 +152,9 @@ EXPORT_SYMBOL_GPL(dcr_resource_len); #ifdef CONFIG_PPC_DCR_MMIO -u64 of_translate_dcr_address(struct device_node *dev, - unsigned int dcr_n, - unsigned int *out_stride) +static u64 of_translate_dcr_address(struct device_node *dev, + unsigned int dcr_n, + unsigned int *out_stride) { struct device_node *dp; const u32 *p; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index d68fe34799b0..bb63499fc5d3 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -60,7 +60,6 @@ config PCI_QUIRKS config S390 def_bool y - select ARCH_DISCARD_MEMBLOCK select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS select ARCH_HAVE_NMI_SAFE_CMPXCHG @@ -130,6 +129,7 @@ config S390 select HAVE_KVM if 64BIT select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP + select HAVE_MEMBLOCK_PHYS_MAP select HAVE_MOD_ARCH_SPECIFIC select HAVE_OPROFILE select HAVE_PERF_EVENTS @@ -139,6 +139,7 @@ config S390 select HAVE_VIRT_CPU_ACCOUNTING select KTIME_SCALAR if 32BIT select MODULES_USE_ELF_RELA + select NO_BOOTMEM select OLD_SIGACTION select OLD_SIGSUSPEND3 select SYSCTL_EXCEPTION_TRACE @@ -592,21 +593,14 @@ config CRASH_DUMP bool "kernel crash dumps" depends on 64BIT && SMP select KEXEC - select ZFCPDUMP help Generate crash dump after being started by kexec. Crash dump kernels are loaded in the main kernel with kexec-tools into a specially reserved region and then later executed after a crash by kdump/kexec. - For more details see Documentation/kdump/kdump.txt - -config ZFCPDUMP - def_bool n - prompt "zfcpdump support" - depends on 64BIT && SMP - help - Select this option if you want to build an zfcpdump enabled kernel. Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this. + This option also enables s390 zfcpdump. + See also <file:Documentation/s390/zfcpdump.txt> endmenu diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 42be53743133..edcf2a706942 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -13,6 +13,7 @@ #include <linux/kernel_stat.h> #include <linux/pagemap.h> #include <linux/swap.h> +#include <linux/slab.h> #include <asm/io.h> #include "appldata.h" diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile index 866ecbe670e4..f90d1fc6d603 100644 --- a/arch/s390/boot/compressed/Makefile +++ b/arch/s390/boot/compressed/Makefile @@ -12,7 +12,7 @@ targets += misc.o piggy.o sizes.h head$(BITS).o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING -KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += $(cflags-y) -fno-delete-null-pointer-checks KBUILD_CFLAGS += $(call cc-option,-mpacked-stack) KBUILD_CFLAGS += $(call cc-option,-ffreestanding) diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 1d4706114a45..fa934fe080c1 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -412,9 +412,4 @@ static inline long long atomic64_dec_if_positive(atomic64_t *v) #define atomic64_dec_and_test(_v) (atomic64_sub_return(1, _v) == 0) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #endif /* __ARCH_S390_ATOMIC__ */ diff --git a/arch/s390/include/asm/barrier.h b/arch/s390/include/asm/barrier.h index 578680f6207a..19ff956b752b 100644 --- a/arch/s390/include/asm/barrier.h +++ b/arch/s390/include/asm/barrier.h @@ -27,8 +27,9 @@ #define smp_rmb() rmb() #define smp_wmb() wmb() #define smp_read_barrier_depends() read_barrier_depends() -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() + +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() smp_mb() #define set_mb(var, value) do { var = value; mb(); } while (0) diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h index a9c2c0686177..b80e456d6428 100644 --- a/arch/s390/include/asm/ccwdev.h +++ b/arch/s390/include/asm/ccwdev.h @@ -229,5 +229,5 @@ int ccw_device_siosl(struct ccw_device *); extern void ccw_device_get_schid(struct ccw_device *, struct subchannel_id *); -extern void *ccw_device_get_chp_desc(struct ccw_device *, int); +struct channel_path_desc *ccw_device_get_chp_desc(struct ccw_device *, int); #endif /* _S390_CCWDEV_H_ */ diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h index ebc2913f9ee0..057ce0ca6377 100644 --- a/arch/s390/include/asm/ccwgroup.h +++ b/arch/s390/include/asm/ccwgroup.h @@ -10,6 +10,8 @@ struct ccw_driver; * @count: number of attached slave devices * @dev: embedded device structure * @cdev: variable number of slave devices, allocated as needed + * @ungroup_work: work to be done when a ccwgroup notifier has action + * type %BUS_NOTIFY_UNBIND_DRIVER */ struct ccwgroup_device { enum { diff --git a/arch/s390/include/asm/chpid.h b/arch/s390/include/asm/chpid.h index 38c405ef89ce..7298eec98541 100644 --- a/arch/s390/include/asm/chpid.h +++ b/arch/s390/include/asm/chpid.h @@ -8,6 +8,17 @@ #include <uapi/asm/chpid.h> #include <asm/cio.h> +struct channel_path_desc { + u8 flags; + u8 lsn; + u8 desc; + u8 chpid; + u8 swla; + u8 zeroes; + u8 chla; + u8 chpp; +} __packed; + static inline void chp_id_init(struct chp_id *chpid) { memset(chpid, 0, sizeof(struct chp_id)); diff --git a/arch/s390/include/asm/ctl_reg.h b/arch/s390/include/asm/ctl_reg.h index 4e63f1a13600..31ab9f346d7e 100644 --- a/arch/s390/include/asm/ctl_reg.h +++ b/arch/s390/include/asm/ctl_reg.h @@ -57,6 +57,20 @@ static inline void __ctl_clear_bit(unsigned int cr, unsigned int bit) void smp_ctl_set_bit(int cr, int bit); void smp_ctl_clear_bit(int cr, int bit); +union ctlreg0 { + unsigned long val; + struct { +#ifdef CONFIG_64BIT + unsigned long : 32; +#endif + unsigned long : 3; + unsigned long lap : 1; /* Low-address-protection control */ + unsigned long : 4; + unsigned long edat : 1; /* Enhanced-DAT-enablement control */ + unsigned long : 23; + }; +}; + #ifdef CONFIG_SMP # define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit) # define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit) diff --git a/arch/s390/include/asm/futex.h b/arch/s390/include/asm/futex.h index 69cf5b5eddc9..a4811aa0304d 100644 --- a/arch/s390/include/asm/futex.h +++ b/arch/s390/include/asm/futex.h @@ -29,7 +29,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr) int cmparg = (encoded_op << 20) >> 20; int oldval = 0, newval, ret; - update_primary_asce(current); + load_kernel_asce(); if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -79,7 +79,7 @@ static inline int futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, { int ret; - update_primary_asce(current); + load_kernel_asce(); asm volatile( " sacf 256\n" "0: cs %1,%4,0(%5)\n" diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 154b60089be9..4181d7baabba 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -32,16 +32,26 @@ #define KVM_NR_IRQCHIPS 1 #define KVM_IRQCHIP_NUM_PINS 4096 +#define SIGP_CTRL_C 0x00800000 + struct sca_entry { - atomic_t scn; + atomic_t ctrl; __u32 reserved; __u64 sda; __u64 reserved2[2]; } __attribute__((packed)); +union ipte_control { + unsigned long val; + struct { + unsigned long k : 1; + unsigned long kh : 31; + unsigned long kg : 32; + }; +}; struct sca_block { - __u64 ipte_control; + union ipte_control ipte_control; __u64 reserved[5]; __u64 mcn; __u64 reserved2; @@ -64,6 +74,7 @@ struct sca_block { #define CPUSTAT_ZARCH 0x00000800 #define CPUSTAT_MCDS 0x00000100 #define CPUSTAT_SM 0x00000080 +#define CPUSTAT_IBS 0x00000040 #define CPUSTAT_G 0x00000008 #define CPUSTAT_GED 0x00000004 #define CPUSTAT_J 0x00000002 @@ -71,7 +82,9 @@ struct sca_block { struct kvm_s390_sie_block { atomic_t cpuflags; /* 0x0000 */ - __u32 prefix; /* 0x0004 */ + __u32 : 1; /* 0x0004 */ + __u32 prefix : 18; + __u32 : 13; __u8 reserved08[4]; /* 0x0008 */ #define PROG_IN_SIE (1<<0) __u32 prog0c; /* 0x000c */ @@ -85,12 +98,27 @@ struct kvm_s390_sie_block { __u8 reserved40[4]; /* 0x0040 */ #define LCTL_CR0 0x8000 #define LCTL_CR6 0x0200 +#define LCTL_CR9 0x0040 +#define LCTL_CR10 0x0020 +#define LCTL_CR11 0x0010 #define LCTL_CR14 0x0002 __u16 lctl; /* 0x0044 */ __s16 icpua; /* 0x0046 */ -#define ICTL_LPSW 0x00400000 +#define ICTL_PINT 0x20000000 +#define ICTL_LPSW 0x00400000 +#define ICTL_STCTL 0x00040000 +#define ICTL_ISKE 0x00004000 +#define ICTL_SSKE 0x00002000 +#define ICTL_RRBE 0x00001000 +#define ICTL_TPROT 0x00000200 __u32 ictl; /* 0x0048 */ __u32 eca; /* 0x004c */ +#define ICPT_INST 0x04 +#define ICPT_PROGI 0x08 +#define ICPT_INSTPROGI 0x0C +#define ICPT_OPEREXC 0x2C +#define ICPT_PARTEXEC 0x38 +#define ICPT_IOINST 0x40 __u8 icptcode; /* 0x0050 */ __u8 reserved51; /* 0x0051 */ __u16 ihcpu; /* 0x0052 */ @@ -109,9 +137,24 @@ struct kvm_s390_sie_block { psw_t gpsw; /* 0x0090 */ __u64 gg14; /* 0x00a0 */ __u64 gg15; /* 0x00a8 */ - __u8 reservedb0[30]; /* 0x00b0 */ - __u16 iprcc; /* 0x00ce */ - __u8 reservedd0[48]; /* 0x00d0 */ + __u8 reservedb0[20]; /* 0x00b0 */ + __u16 extcpuaddr; /* 0x00c4 */ + __u16 eic; /* 0x00c6 */ + __u32 reservedc8; /* 0x00c8 */ + __u16 pgmilc; /* 0x00cc */ + __u16 iprcc; /* 0x00ce */ + __u32 dxc; /* 0x00d0 */ + __u16 mcn; /* 0x00d4 */ + __u8 perc; /* 0x00d6 */ + __u8 peratmid; /* 0x00d7 */ + __u64 peraddr; /* 0x00d8 */ + __u8 eai; /* 0x00e0 */ + __u8 peraid; /* 0x00e1 */ + __u8 oai; /* 0x00e2 */ + __u8 armid; /* 0x00e3 */ + __u8 reservede4[4]; /* 0x00e4 */ + __u64 tecmc; /* 0x00e8 */ + __u8 reservedf0[16]; /* 0x00f0 */ __u64 gcr[16]; /* 0x0100 */ __u64 gbea; /* 0x0180 */ __u8 reserved188[24]; /* 0x0188 */ @@ -146,6 +189,8 @@ struct kvm_vcpu_stat { u32 exit_instruction; u32 instruction_lctl; u32 instruction_lctlg; + u32 instruction_stctl; + u32 instruction_stctg; u32 exit_program_interruption; u32 exit_instr_and_program; u32 deliver_external_call; @@ -164,6 +209,7 @@ struct kvm_vcpu_stat { u32 instruction_stpx; u32 instruction_stap; u32 instruction_storage_key; + u32 instruction_ipte_interlock; u32 instruction_stsch; u32 instruction_chsc; u32 instruction_stsi; @@ -183,13 +229,58 @@ struct kvm_vcpu_stat { u32 diagnose_9c; }; -#define PGM_OPERATION 0x01 -#define PGM_PRIVILEGED_OP 0x02 -#define PGM_EXECUTE 0x03 -#define PGM_PROTECTION 0x04 -#define PGM_ADDRESSING 0x05 -#define PGM_SPECIFICATION 0x06 -#define PGM_DATA 0x07 +#define PGM_OPERATION 0x01 +#define PGM_PRIVILEGED_OP 0x02 +#define PGM_EXECUTE 0x03 +#define PGM_PROTECTION 0x04 +#define PGM_ADDRESSING 0x05 +#define PGM_SPECIFICATION 0x06 +#define PGM_DATA 0x07 +#define PGM_FIXED_POINT_OVERFLOW 0x08 +#define PGM_FIXED_POINT_DIVIDE 0x09 +#define PGM_DECIMAL_OVERFLOW 0x0a +#define PGM_DECIMAL_DIVIDE 0x0b +#define PGM_HFP_EXPONENT_OVERFLOW 0x0c +#define PGM_HFP_EXPONENT_UNDERFLOW 0x0d +#define PGM_HFP_SIGNIFICANCE 0x0e +#define PGM_HFP_DIVIDE 0x0f +#define PGM_SEGMENT_TRANSLATION 0x10 +#define PGM_PAGE_TRANSLATION 0x11 +#define PGM_TRANSLATION_SPEC 0x12 +#define PGM_SPECIAL_OPERATION 0x13 +#define PGM_OPERAND 0x15 +#define PGM_TRACE_TABEL 0x16 +#define PGM_SPACE_SWITCH 0x1c +#define PGM_HFP_SQUARE_ROOT 0x1d +#define PGM_PC_TRANSLATION_SPEC 0x1f +#define PGM_AFX_TRANSLATION 0x20 +#define PGM_ASX_TRANSLATION 0x21 +#define PGM_LX_TRANSLATION 0x22 +#define PGM_EX_TRANSLATION 0x23 +#define PGM_PRIMARY_AUTHORITY 0x24 +#define PGM_SECONDARY_AUTHORITY 0x25 +#define PGM_LFX_TRANSLATION 0x26 +#define PGM_LSX_TRANSLATION 0x27 +#define PGM_ALET_SPECIFICATION 0x28 +#define PGM_ALEN_TRANSLATION 0x29 +#define PGM_ALE_SEQUENCE 0x2a +#define PGM_ASTE_VALIDITY 0x2b +#define PGM_ASTE_SEQUENCE 0x2c +#define PGM_EXTENDED_AUTHORITY 0x2d +#define PGM_LSTE_SEQUENCE 0x2e +#define PGM_ASTE_INSTANCE 0x2f +#define PGM_STACK_FULL 0x30 +#define PGM_STACK_EMPTY 0x31 +#define PGM_STACK_SPECIFICATION 0x32 +#define PGM_STACK_TYPE 0x33 +#define PGM_STACK_OPERATION 0x34 +#define PGM_ASCE_TYPE 0x38 +#define PGM_REGION_FIRST_TRANS 0x39 +#define PGM_REGION_SECOND_TRANS 0x3a +#define PGM_REGION_THIRD_TRANS 0x3b +#define PGM_MONITOR 0x40 +#define PGM_PER 0x80 +#define PGM_CRYPTO_OPERATION 0x119 struct kvm_s390_interrupt_info { struct list_head list; @@ -229,6 +320,45 @@ struct kvm_s390_float_interrupt { unsigned int irq_count; }; +struct kvm_hw_wp_info_arch { + unsigned long addr; + unsigned long phys_addr; + int len; + char *old_data; +}; + +struct kvm_hw_bp_info_arch { + unsigned long addr; + int len; +}; + +/* + * Only the upper 16 bits of kvm_guest_debug->control are arch specific. + * Further KVM_GUESTDBG flags which an be used from userspace can be found in + * arch/s390/include/uapi/asm/kvm.h + */ +#define KVM_GUESTDBG_EXIT_PENDING 0x10000000 + +#define guestdbg_enabled(vcpu) \ + (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) +#define guestdbg_sstep_enabled(vcpu) \ + (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) +#define guestdbg_hw_bp_enabled(vcpu) \ + (vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP) +#define guestdbg_exit_pending(vcpu) (guestdbg_enabled(vcpu) && \ + (vcpu->guest_debug & KVM_GUESTDBG_EXIT_PENDING)) + +struct kvm_guestdbg_info_arch { + unsigned long cr0; + unsigned long cr9; + unsigned long cr10; + unsigned long cr11; + struct kvm_hw_bp_info_arch *hw_bp_info; + struct kvm_hw_wp_info_arch *hw_wp_info; + int nr_hw_bp; + int nr_hw_wp; + unsigned long last_bp; +}; struct kvm_vcpu_arch { struct kvm_s390_sie_block *sie_block; @@ -238,11 +368,13 @@ struct kvm_vcpu_arch { struct kvm_s390_local_interrupt local_int; struct hrtimer ckc_timer; struct tasklet_struct tasklet; + struct kvm_s390_pgm_info pgm; union { struct cpuid cpu_id; u64 stidp_data; }; struct gmap *gmap; + struct kvm_guestdbg_info_arch guestdbg; #define KVM_S390_PFAULT_TOKEN_INVALID (-1UL) unsigned long pfault_token; unsigned long pfault_select; @@ -285,7 +417,10 @@ struct kvm_arch{ struct gmap *gmap; int css_support; int use_irqchip; + int use_cmma; struct s390_io_adapter *adapters[MAX_S390_IO_ADAPTERS]; + wait_queue_head_t ipte_wq; + spinlock_t start_stop_lock; }; #define KVM_HVA_ERR_BAD (-1UL) diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index bbf8141408cd..4349197ab9df 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -56,13 +56,14 @@ struct _lowcore { __u16 pgm_code; /* 0x008e */ __u32 trans_exc_code; /* 0x0090 */ __u16 mon_class_num; /* 0x0094 */ - __u16 per_perc_atmid; /* 0x0096 */ + __u8 per_code; /* 0x0096 */ + __u8 per_atmid; /* 0x0097 */ __u32 per_address; /* 0x0098 */ __u32 monitor_code; /* 0x009c */ __u8 exc_access_id; /* 0x00a0 */ __u8 per_access_id; /* 0x00a1 */ __u8 op_access_id; /* 0x00a2 */ - __u8 ar_access_id; /* 0x00a3 */ + __u8 ar_mode_id; /* 0x00a3 */ __u8 pad_0x00a4[0x00b8-0x00a4]; /* 0x00a4 */ __u16 subchannel_id; /* 0x00b8 */ __u16 subchannel_nr; /* 0x00ba */ @@ -93,7 +94,9 @@ struct _lowcore { __u32 save_area_sync[8]; /* 0x0200 */ __u32 save_area_async[8]; /* 0x0220 */ __u32 save_area_restart[1]; /* 0x0240 */ - __u8 pad_0x0244[0x0248-0x0244]; /* 0x0244 */ + + /* CPU flags. */ + __u32 cpu_flags; /* 0x0244 */ /* Return psws. */ psw_t return_psw; /* 0x0248 */ @@ -139,12 +142,9 @@ struct _lowcore { __u32 percpu_offset; /* 0x02f0 */ __u32 machine_flags; /* 0x02f4 */ __u32 ftrace_func; /* 0x02f8 */ - __u8 pad_0x02fc[0x0300-0x02fc]; /* 0x02fc */ - - /* Interrupt response block */ - __u8 irb[64]; /* 0x0300 */ + __u32 spinlock_lockval; /* 0x02fc */ - __u8 pad_0x0340[0x0e00-0x0340]; /* 0x0340 */ + __u8 pad_0x0300[0x0e00-0x0300]; /* 0x0300 */ /* * 0xe00 contains the address of the IPL Parameter Information @@ -196,12 +196,13 @@ struct _lowcore { __u16 pgm_code; /* 0x008e */ __u32 data_exc_code; /* 0x0090 */ __u16 mon_class_num; /* 0x0094 */ - __u16 per_perc_atmid; /* 0x0096 */ + __u8 per_code; /* 0x0096 */ + __u8 per_atmid; /* 0x0097 */ __u64 per_address; /* 0x0098 */ __u8 exc_access_id; /* 0x00a0 */ __u8 per_access_id; /* 0x00a1 */ __u8 op_access_id; /* 0x00a2 */ - __u8 ar_access_id; /* 0x00a3 */ + __u8 ar_mode_id; /* 0x00a3 */ __u8 pad_0x00a4[0x00a8-0x00a4]; /* 0x00a4 */ __u64 trans_exc_code; /* 0x00a8 */ __u64 monitor_code; /* 0x00b0 */ @@ -237,7 +238,9 @@ struct _lowcore { __u64 save_area_sync[8]; /* 0x0200 */ __u64 save_area_async[8]; /* 0x0240 */ __u64 save_area_restart[1]; /* 0x0280 */ - __u8 pad_0x0288[0x0290-0x0288]; /* 0x0288 */ + + /* CPU flags. */ + __u64 cpu_flags; /* 0x0288 */ /* Return psws. */ psw_t return_psw; /* 0x0290 */ @@ -285,15 +288,13 @@ struct _lowcore { __u64 machine_flags; /* 0x0388 */ __u64 ftrace_func; /* 0x0390 */ __u64 gmap; /* 0x0398 */ - __u8 pad_0x03a0[0x0400-0x03a0]; /* 0x03a0 */ - - /* Interrupt response block. */ - __u8 irb[64]; /* 0x0400 */ + __u32 spinlock_lockval; /* 0x03a0 */ + __u8 pad_0x03a0[0x0400-0x03a4]; /* 0x03a4 */ /* Per cpu primary space access list */ - __u32 paste[16]; /* 0x0440 */ + __u32 paste[16]; /* 0x0400 */ - __u8 pad_0x0480[0x0e00-0x0480]; /* 0x0480 */ + __u8 pad_0x04c0[0x0e00-0x0440]; /* 0x0440 */ /* * 0xe00 contains the address of the IPL Parameter Information diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h index f77695a82f64..a5e656260a70 100644 --- a/arch/s390/include/asm/mmu.h +++ b/arch/s390/include/asm/mmu.h @@ -16,6 +16,8 @@ typedef struct { unsigned long vdso_base; /* The mmu context has extended page tables. */ unsigned int has_pgste:1; + /* The mmu context uses storage keys. */ + unsigned int use_skey:1; } mm_context_t; #define INIT_MM_CONTEXT(name) \ diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index 71be346d0e3c..c28f32a45af5 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -23,6 +23,7 @@ static inline int init_new_context(struct task_struct *tsk, mm->context.asce_bits |= _ASCE_TYPE_REGION3; #endif mm->context.has_pgste = 0; + mm->context.use_skey = 0; mm->context.asce_limit = STACK_TOP_MAX; crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm)); return 0; @@ -30,33 +31,31 @@ static inline int init_new_context(struct task_struct *tsk, #define destroy_context(mm) do { } while (0) -static inline void update_user_asce(struct mm_struct *mm, int load_primary) +static inline void set_user_asce(struct mm_struct *mm) { pgd_t *pgd = mm->pgd; S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); - if (load_primary) - __ctl_load(S390_lowcore.user_asce, 1, 1); set_fs(current->thread.mm_segment); + set_cpu_flag(CIF_ASCE); } -static inline void clear_user_asce(struct mm_struct *mm, int load_primary) +static inline void clear_user_asce(void) { S390_lowcore.user_asce = S390_lowcore.kernel_asce; - if (load_primary) - __ctl_load(S390_lowcore.user_asce, 1, 1); + __ctl_load(S390_lowcore.user_asce, 1, 1); __ctl_load(S390_lowcore.user_asce, 7, 7); } -static inline void update_primary_asce(struct task_struct *tsk) +static inline void load_kernel_asce(void) { unsigned long asce; __ctl_store(asce, 1, 1); if (asce != S390_lowcore.kernel_asce) __ctl_load(S390_lowcore.kernel_asce, 1, 1); - set_tsk_thread_flag(tsk, TIF_ASCE); + set_cpu_flag(CIF_ASCE); } static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, @@ -64,25 +63,17 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, { int cpu = smp_processor_id(); - update_primary_asce(tsk); if (prev == next) return; if (MACHINE_HAS_TLB_LC) cpumask_set_cpu(cpu, &next->context.cpu_attach_mask); - if (atomic_inc_return(&next->context.attach_count) >> 16) { - /* Delay update_user_asce until all TLB flushes are done. */ - set_tsk_thread_flag(tsk, TIF_TLB_WAIT); - /* Clear old ASCE by loading the kernel ASCE. */ - clear_user_asce(next, 0); - } else { - cpumask_set_cpu(cpu, mm_cpumask(next)); - update_user_asce(next, 0); - if (next->context.flush_mm) - /* Flush pending TLBs */ - __tlb_flush_mm(next); - } + /* Clear old ASCE by loading the kernel ASCE. */ + __ctl_load(S390_lowcore.kernel_asce, 1, 1); + __ctl_load(S390_lowcore.kernel_asce, 7, 7); + /* Delay loading of the new ASCE to control registers CR1 & CR7 */ + set_cpu_flag(CIF_ASCE); + atomic_inc(&next->context.attach_count); atomic_dec(&prev->context.attach_count); - WARN_ON(atomic_read(&prev->context.attach_count) < 0); if (MACHINE_HAS_TLB_LC) cpumask_clear_cpu(cpu, &prev->context.cpu_attach_mask); } @@ -93,15 +84,14 @@ static inline void finish_arch_post_lock_switch(void) struct task_struct *tsk = current; struct mm_struct *mm = tsk->mm; - if (!test_tsk_thread_flag(tsk, TIF_TLB_WAIT)) + if (!mm) return; preempt_disable(); - clear_tsk_thread_flag(tsk, TIF_TLB_WAIT); while (atomic_read(&mm->context.attach_count) >> 16) cpu_relax(); cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm)); - update_user_asce(mm, 0); + set_user_asce(mm); if (mm->context.flush_mm) __tlb_flush_mm(mm); preempt_enable(); @@ -113,7 +103,9 @@ static inline void finish_arch_post_lock_switch(void) static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) { - switch_mm(prev, next, current); + switch_mm(prev, next, current); + cpumask_set_cpu(smp_processor_id(), mm_cpumask(next)); + set_user_asce(next); } static inline void arch_dup_mmap(struct mm_struct *oldmm, diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 2583466f576b..c030900320e0 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -78,10 +78,16 @@ struct zpci_dev { enum zpci_state state; u32 fid; /* function ID, used by sclp */ u32 fh; /* function handle, used by insn's */ + u16 vfn; /* virtual function number */ u16 pchid; /* physical channel ID */ u8 pfgid; /* function group ID */ + u8 pft; /* pci function type */ u16 domain; + u8 pfip[CLP_PFIP_NR_SEGMENTS]; /* pci function internal path */ + u32 uid; /* user defined id */ + u8 util_str[CLP_UTIL_STR_LEN]; /* utility string */ + /* IRQ stuff */ u64 msi_addr; /* MSI address */ struct airq_iv *aibv; /* adapter interrupt bit vector */ @@ -120,6 +126,8 @@ static inline bool zdev_enabled(struct zpci_dev *zdev) return (zdev->fh & (1UL << 31)) ? true : false; } +extern const struct attribute_group *zpci_attr_groups[]; + /* ----------------------------------------------------------------------------- Prototypes ----------------------------------------------------------------------------- */ @@ -166,10 +174,6 @@ static inline void zpci_exit_slot(struct zpci_dev *zdev) {} struct zpci_dev *get_zdev(struct pci_dev *); struct zpci_dev *get_zdev_by_fid(u32); -/* sysfs */ -int zpci_sysfs_add_device(struct device *); -void zpci_sysfs_remove_device(struct device *); - /* DMA */ int zpci_dma_init(void); void zpci_dma_exit(void); diff --git a/arch/s390/include/asm/pci_clp.h b/arch/s390/include/asm/pci_clp.h index d31d739f8689..dd78f92f1cce 100644 --- a/arch/s390/include/asm/pci_clp.h +++ b/arch/s390/include/asm/pci_clp.h @@ -44,6 +44,7 @@ struct clp_fh_list_entry { #define CLP_SET_DISABLE_PCI_FN 1 /* Yes, 1 disables it */ #define CLP_UTIL_STR_LEN 64 +#define CLP_PFIP_NR_SEGMENTS 4 /* List PCI functions request */ struct clp_req_list_pci { @@ -85,7 +86,7 @@ struct clp_rsp_query_pci { struct clp_rsp_hdr hdr; u32 fmt : 4; /* cmd request block format */ u32 : 28; - u64 reserved1; + u64 : 64; u16 vfn; /* virtual fn number */ u16 : 7; u16 util_str_avail : 1; /* utility string available? */ @@ -94,10 +95,13 @@ struct clp_rsp_query_pci { u8 bar_size[PCI_BAR_COUNT]; u16 pchid; u32 bar[PCI_BAR_COUNT]; - u64 reserved2; + u8 pfip[CLP_PFIP_NR_SEGMENTS]; /* pci function internal path */ + u32 : 24; + u8 pft; /* pci function type */ u64 sdma; /* start dma as */ u64 edma; /* end dma as */ - u64 reserved3[6]; + u32 reserved[11]; + u32 uid; /* user defined id */ u8 util_str[CLP_UTIL_STR_LEN]; /* utility string */ } __packed; diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 884017cbfa9f..9e18a61d3df3 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -22,7 +22,8 @@ unsigned long *page_table_alloc(struct mm_struct *, unsigned long); void page_table_free(struct mm_struct *, unsigned long *); void page_table_free_rcu(struct mmu_gather *, unsigned long *); -void page_table_reset_pgste(struct mm_struct *, unsigned long, unsigned long); +void page_table_reset_pgste(struct mm_struct *, unsigned long, unsigned long, + bool init_skey); int set_guest_storage_key(struct mm_struct *mm, unsigned long addr, unsigned long key, bool nq); diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 12f75313e086..fcba5e03839f 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -309,7 +309,8 @@ extern unsigned long MODULES_END; #define PGSTE_HC_BIT 0x00200000UL #define PGSTE_GR_BIT 0x00040000UL #define PGSTE_GC_BIT 0x00020000UL -#define PGSTE_IN_BIT 0x00008000UL /* IPTE notify bit */ +#define PGSTE_UC_BIT 0x00008000UL /* user dirty (migration) */ +#define PGSTE_IN_BIT 0x00004000UL /* IPTE notify bit */ #else /* CONFIG_64BIT */ @@ -391,7 +392,8 @@ extern unsigned long MODULES_END; #define PGSTE_HC_BIT 0x0020000000000000UL #define PGSTE_GR_BIT 0x0004000000000000UL #define PGSTE_GC_BIT 0x0002000000000000UL -#define PGSTE_IN_BIT 0x0000800000000000UL /* IPTE notify bit */ +#define PGSTE_UC_BIT 0x0000800000000000UL /* user dirty (migration) */ +#define PGSTE_IN_BIT 0x0000400000000000UL /* IPTE notify bit */ #endif /* CONFIG_64BIT */ @@ -466,6 +468,16 @@ static inline int mm_has_pgste(struct mm_struct *mm) #endif return 0; } + +static inline int mm_use_skey(struct mm_struct *mm) +{ +#ifdef CONFIG_PGSTE + if (mm->context.use_skey) + return 1; +#endif + return 0; +} + /* * pgd/pmd/pte query functions */ @@ -699,26 +711,17 @@ static inline void pgste_set(pte_t *ptep, pgste_t pgste) #endif } -static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) +static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste, + struct mm_struct *mm) { #ifdef CONFIG_PGSTE unsigned long address, bits, skey; - if (pte_val(*ptep) & _PAGE_INVALID) + if (!mm_use_skey(mm) || pte_val(*ptep) & _PAGE_INVALID) return pgste; address = pte_val(*ptep) & PAGE_MASK; skey = (unsigned long) page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); - if (!(pgste_val(pgste) & PGSTE_HC_BIT) && (bits & _PAGE_CHANGED)) { - /* Transfer dirty + referenced bit to host bits in pgste */ - pgste_val(pgste) |= bits << 52; - page_set_storage_key(address, skey ^ bits, 0); - } else if (!(pgste_val(pgste) & PGSTE_HR_BIT) && - (bits & _PAGE_REFERENCED)) { - /* Transfer referenced bit to host bit in pgste */ - pgste_val(pgste) |= PGSTE_HR_BIT; - page_reset_referenced(address); - } /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* GR bit & GC bit */ /* Copy page access key and fetch protection bit to pgste */ @@ -729,25 +732,14 @@ static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) } -static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) -{ -#ifdef CONFIG_PGSTE - if (pte_val(*ptep) & _PAGE_INVALID) - return pgste; - /* Get referenced bit from storage key */ - if (page_reset_referenced(pte_val(*ptep) & PAGE_MASK)) - pgste_val(pgste) |= PGSTE_HR_BIT | PGSTE_GR_BIT; -#endif - return pgste; -} - -static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) +static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry, + struct mm_struct *mm) { #ifdef CONFIG_PGSTE unsigned long address; unsigned long nkey; - if (pte_val(entry) & _PAGE_INVALID) + if (!mm_use_skey(mm) || pte_val(entry) & _PAGE_INVALID) return; VM_BUG_ON(!(pte_val(*ptep) & _PAGE_INVALID)); address = pte_val(entry) & PAGE_MASK; @@ -757,23 +749,30 @@ static inline void pgste_set_key(pte_t *ptep, pgste_t pgste, pte_t entry) * key C/R to 0. */ nkey = (pgste_val(pgste) & (PGSTE_ACC_BITS | PGSTE_FP_BIT)) >> 56; + nkey |= (pgste_val(pgste) & (PGSTE_GR_BIT | PGSTE_GC_BIT)) >> 48; page_set_storage_key(address, nkey, 0); #endif } -static inline void pgste_set_pte(pte_t *ptep, pte_t entry) +static inline pgste_t pgste_set_pte(pte_t *ptep, pgste_t pgste, pte_t entry) { - if (!MACHINE_HAS_ESOP && - (pte_val(entry) & _PAGE_PRESENT) && - (pte_val(entry) & _PAGE_WRITE)) { - /* - * Without enhanced suppression-on-protection force - * the dirty bit on for all writable ptes. - */ - pte_val(entry) |= _PAGE_DIRTY; - pte_val(entry) &= ~_PAGE_PROTECT; + if ((pte_val(entry) & _PAGE_PRESENT) && + (pte_val(entry) & _PAGE_WRITE) && + !(pte_val(entry) & _PAGE_INVALID)) { + if (!MACHINE_HAS_ESOP) { + /* + * Without enhanced suppression-on-protection force + * the dirty bit on for all writable ptes. + */ + pte_val(entry) |= _PAGE_DIRTY; + pte_val(entry) &= ~_PAGE_PROTECT; + } + if (!(pte_val(entry) & _PAGE_PROTECT)) + /* This pte allows write access, set user-dirty */ + pgste_val(pgste) |= PGSTE_UC_BIT; } *ptep = entry; + return pgste; } /** @@ -839,6 +838,8 @@ unsigned long __gmap_fault(unsigned long address, struct gmap *); unsigned long gmap_fault(unsigned long address, struct gmap *); void gmap_discard(unsigned long from, unsigned long to, struct gmap *); void __gmap_zap(unsigned long address, struct gmap *); +bool gmap_test_and_clear_dirty(unsigned long address, struct gmap *); + void gmap_register_ipte_notifier(struct gmap_notifier *); void gmap_unregister_ipte_notifier(struct gmap_notifier *); @@ -870,8 +871,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, if (mm_has_pgste(mm)) { pgste = pgste_get_lock(ptep); pgste_val(pgste) &= ~_PGSTE_GPS_ZERO; - pgste_set_key(ptep, pgste, entry); - pgste_set_pte(ptep, entry); + pgste_set_key(ptep, pgste, entry, mm); + pgste = pgste_set_pte(ptep, pgste, entry); pgste_set_unlock(ptep, pgste); } else { if (!(pte_val(entry) & _PAGE_INVALID) && MACHINE_HAS_EDAT1) @@ -1017,45 +1018,6 @@ static inline pte_t pte_mkhuge(pte_t pte) } #endif -/* - * Get (and clear) the user dirty bit for a pte. - */ -static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm, - pte_t *ptep) -{ - pgste_t pgste; - int dirty = 0; - - if (mm_has_pgste(mm)) { - pgste = pgste_get_lock(ptep); - pgste = pgste_update_all(ptep, pgste); - dirty = !!(pgste_val(pgste) & PGSTE_HC_BIT); - pgste_val(pgste) &= ~PGSTE_HC_BIT; - pgste_set_unlock(ptep, pgste); - return dirty; - } - return dirty; -} - -/* - * Get (and clear) the user referenced bit for a pte. - */ -static inline int ptep_test_and_clear_user_young(struct mm_struct *mm, - pte_t *ptep) -{ - pgste_t pgste; - int young = 0; - - if (mm_has_pgste(mm)) { - pgste = pgste_get_lock(ptep); - pgste = pgste_update_young(ptep, pgste); - young = !!(pgste_val(pgste) & PGSTE_HR_BIT); - pgste_val(pgste) &= ~PGSTE_HR_BIT; - pgste_set_unlock(ptep, pgste); - } - return young; -} - static inline void __ptep_ipte(unsigned long address, pte_t *ptep) { unsigned long pto = (unsigned long) ptep; @@ -1118,6 +1080,36 @@ static inline void ptep_flush_lazy(struct mm_struct *mm, atomic_sub(0x10000, &mm->context.attach_count); } +/* + * Get (and clear) the user dirty bit for a pte. + */ +static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm, + unsigned long addr, + pte_t *ptep) +{ + pgste_t pgste; + pte_t pte; + int dirty; + + if (!mm_has_pgste(mm)) + return 0; + pgste = pgste_get_lock(ptep); + dirty = !!(pgste_val(pgste) & PGSTE_UC_BIT); + pgste_val(pgste) &= ~PGSTE_UC_BIT; + pte = *ptep; + if (dirty && (pte_val(pte) & _PAGE_PRESENT)) { + pgste = pgste_ipte_notify(mm, ptep, pgste); + __ptep_ipte(addr, ptep); + if (MACHINE_HAS_ESOP || !(pte_val(pte) & _PAGE_WRITE)) + pte_val(pte) |= _PAGE_PROTECT; + else + pte_val(pte) |= _PAGE_INVALID; + *ptep = pte; + } + pgste_set_unlock(ptep, pgste); + return dirty; +} + #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) @@ -1137,7 +1129,7 @@ static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, pte = pte_mkold(pte); if (mm_has_pgste(vma->vm_mm)) { - pgste_set_pte(ptep, pte); + pgste = pgste_set_pte(ptep, pgste, pte); pgste_set_unlock(ptep, pgste); } else *ptep = pte; @@ -1182,7 +1174,7 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm, pte_val(*ptep) = _PAGE_INVALID; if (mm_has_pgste(mm)) { - pgste = pgste_update_all(&pte, pgste); + pgste = pgste_update_all(&pte, pgste, mm); pgste_set_unlock(ptep, pgste); } return pte; @@ -1205,7 +1197,7 @@ static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, ptep_flush_lazy(mm, address, ptep); if (mm_has_pgste(mm)) { - pgste = pgste_update_all(&pte, pgste); + pgste = pgste_update_all(&pte, pgste, mm); pgste_set(ptep, pgste); } return pte; @@ -1219,8 +1211,8 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm, if (mm_has_pgste(mm)) { pgste = pgste_get(ptep); - pgste_set_key(ptep, pgste, pte); - pgste_set_pte(ptep, pte); + pgste_set_key(ptep, pgste, pte, mm); + pgste = pgste_set_pte(ptep, pgste, pte); pgste_set_unlock(ptep, pgste); } else *ptep = pte; @@ -1246,7 +1238,7 @@ static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, if ((pgste_val(pgste) & _PGSTE_GPS_USAGE_MASK) == _PGSTE_GPS_USAGE_UNUSED) pte_val(pte) |= _PAGE_UNUSED; - pgste = pgste_update_all(&pte, pgste); + pgste = pgste_update_all(&pte, pgste, vma->vm_mm); pgste_set_unlock(ptep, pgste); } return pte; @@ -1278,7 +1270,7 @@ static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, pte_val(*ptep) = _PAGE_INVALID; if (!full && mm_has_pgste(mm)) { - pgste = pgste_update_all(&pte, pgste); + pgste = pgste_update_all(&pte, pgste, mm); pgste_set_unlock(ptep, pgste); } return pte; @@ -1301,7 +1293,7 @@ static inline pte_t ptep_set_wrprotect(struct mm_struct *mm, pte = pte_wrprotect(pte); if (mm_has_pgste(mm)) { - pgste_set_pte(ptep, pte); + pgste = pgste_set_pte(ptep, pgste, pte); pgste_set_unlock(ptep, pgste); } else *ptep = pte; @@ -1326,7 +1318,7 @@ static inline int ptep_set_access_flags(struct vm_area_struct *vma, ptep_flush_direct(vma->vm_mm, address, ptep); if (mm_has_pgste(vma->vm_mm)) { - pgste_set_pte(ptep, entry); + pgste = pgste_set_pte(ptep, pgste, entry); pgste_set_unlock(ptep, pgste); } else *ptep = entry; @@ -1734,6 +1726,7 @@ static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset) extern int vmem_add_mapping(unsigned long start, unsigned long size); extern int vmem_remove_mapping(unsigned long start, unsigned long size); extern int s390_enable_sie(void); +extern void s390_enable_skey(void); /* * No page table caches to initialise diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index dc5fc4f90e52..6f02d452bbee 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -11,6 +11,13 @@ #ifndef __ASM_S390_PROCESSOR_H #define __ASM_S390_PROCESSOR_H +#define CIF_MCCK_PENDING 0 /* machine check handling is pending */ +#define CIF_ASCE 1 /* user asce needs fixup / uaccess */ + +#define _CIF_MCCK_PENDING (1<<CIF_MCCK_PENDING) +#define _CIF_ASCE (1<<CIF_ASCE) + + #ifndef __ASSEMBLY__ #include <linux/linkage.h> @@ -21,6 +28,21 @@ #include <asm/setup.h> #include <asm/runtime_instr.h> +static inline void set_cpu_flag(int flag) +{ + S390_lowcore.cpu_flags |= (1U << flag); +} + +static inline void clear_cpu_flag(int flag) +{ + S390_lowcore.cpu_flags &= ~(1U << flag); +} + +static inline int test_cpu_flag(int flag) +{ + return !!(S390_lowcore.cpu_flags & (1U << flag)); +} + /* * Default implementation of macro that returns current * instruction pointer ("program counter"). diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h index f4783c0b7b43..55d69dd7473c 100644 --- a/arch/s390/include/asm/ptrace.h +++ b/arch/s390/include/asm/ptrace.h @@ -8,6 +8,12 @@ #include <uapi/asm/ptrace.h> +#define PIF_SYSCALL 0 /* inside a system call */ +#define PIF_PER_TRAP 1 /* deliver sigtrap on return to user */ + +#define _PIF_SYSCALL (1<<PIF_SYSCALL) +#define _PIF_PER_TRAP (1<<PIF_PER_TRAP) + #ifndef __ASSEMBLY__ #define PSW_KERNEL_BITS (PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_ASC_HOME | \ @@ -16,6 +22,50 @@ PSW_DEFAULT_KEY | PSW_MASK_BASE | PSW_MASK_MCHECK | \ PSW_MASK_PSTATE | PSW_ASC_PRIMARY) +struct psw_bits { + unsigned long long : 1; + unsigned long long r : 1; /* PER-Mask */ + unsigned long long : 3; + unsigned long long t : 1; /* DAT Mode */ + unsigned long long i : 1; /* Input/Output Mask */ + unsigned long long e : 1; /* External Mask */ + unsigned long long key : 4; /* PSW Key */ + unsigned long long : 1; + unsigned long long m : 1; /* Machine-Check Mask */ + unsigned long long w : 1; /* Wait State */ + unsigned long long p : 1; /* Problem State */ + unsigned long long as : 2; /* Address Space Control */ + unsigned long long cc : 2; /* Condition Code */ + unsigned long long pm : 4; /* Program Mask */ + unsigned long long ri : 1; /* Runtime Instrumentation */ + unsigned long long : 6; + unsigned long long eaba : 2; /* Addressing Mode */ +#ifdef CONFIG_64BIT + unsigned long long : 31; + unsigned long long ia : 64;/* Instruction Address */ +#else + unsigned long long ia : 31;/* Instruction Address */ +#endif +}; + +enum { + PSW_AMODE_24BIT = 0, + PSW_AMODE_31BIT = 1, + PSW_AMODE_64BIT = 3 +}; + +enum { + PSW_AS_PRIMARY = 0, + PSW_AS_ACCREG = 1, + PSW_AS_SECONDARY = 2, + PSW_AS_HOME = 3 +}; + +#define psw_bits(__psw) (*({ \ + typecheck(psw_t, __psw); \ + &(*(struct psw_bits *)(&(__psw))); \ +})) + /* * The pt_regs struct defines the way the registers are stored on * the stack during a system call. @@ -29,6 +79,7 @@ struct pt_regs unsigned int int_code; unsigned int int_parm; unsigned long int_parm_long; + unsigned long flags; }; /* @@ -79,6 +130,21 @@ struct per_struct_kernel { #define PER_CONTROL_SUSPENSION 0x00400000UL #define PER_CONTROL_ALTERATION 0x00200000UL +static inline void set_pt_regs_flag(struct pt_regs *regs, int flag) +{ + regs->flags |= (1U << flag); +} + +static inline void clear_pt_regs_flag(struct pt_regs *regs, int flag) +{ + regs->flags &= ~(1U << flag); +} + +static inline int test_pt_regs_flag(struct pt_regs *regs, int flag) +{ + return !!(regs->flags & (1U << flag)); +} + /* * These are defined as per linux/ptrace.h, which see. */ diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h index 2f5e9932b4de..1aba89b53cb9 100644 --- a/arch/s390/include/asm/sclp.h +++ b/arch/s390/include/asm/sclp.h @@ -28,7 +28,11 @@ struct sclp_ipl_info { struct sclp_cpu_entry { u8 address; - u8 reserved0[13]; + u8 reserved0[2]; + u8 : 3; + u8 siif : 1; + u8 : 4; + u8 reserved2[10]; u8 type; u8 reserved1; } __attribute__((packed)); @@ -61,5 +65,7 @@ int sclp_pci_deconfigure(u32 fid); int memcpy_hsa(void *dest, unsigned long src, size_t count, int mode); unsigned long sclp_get_hsa_size(void); void sclp_early_detect(void); +int sclp_has_siif(void); +unsigned int sclp_get_ibc(void); #endif /* _ASM_S390_SCLP_H */ diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index b31b22dba948..089a49814c50 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -9,7 +9,6 @@ #define PARMAREA 0x10400 -#define MEMORY_CHUNKS 256 #ifndef __ASSEMBLY__ @@ -31,22 +30,11 @@ #endif /* CONFIG_64BIT */ #define COMMAND_LINE ((char *) (0x10480)) -#define CHUNK_READ_WRITE 0 -#define CHUNK_READ_ONLY 1 - -struct mem_chunk { - unsigned long addr; - unsigned long size; - int type; -}; - -extern struct mem_chunk memory_chunk[]; extern int memory_end_set; extern unsigned long memory_end; +extern unsigned long max_physmem_end; -void detect_memory_layout(struct mem_chunk chunk[], unsigned long maxsize); -void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr, - unsigned long size); +extern void detect_memory_memblock(void); /* * Machine features detected in head.S diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index 21703f85b48d..4f1307962a95 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -30,7 +30,6 @@ extern int smp_store_status(int cpu); extern int smp_vcpu_scheduled(int cpu); extern void smp_yield_cpu(int cpu); extern void smp_yield(void); -extern void smp_stop_cpu(void); extern void smp_cpu_set_polarization(int cpu, int val); extern int smp_cpu_get_polarization(int cpu); extern void smp_fill_possible_mask(void); @@ -54,6 +53,8 @@ static inline void smp_yield_cpu(int cpu) { } static inline void smp_yield(void) { } static inline void smp_fill_possible_mask(void) { } +#endif /* CONFIG_SMP */ + static inline void smp_stop_cpu(void) { u16 pcpu = stap(); @@ -64,8 +65,6 @@ static inline void smp_stop_cpu(void) } } -#endif /* CONFIG_SMP */ - #ifdef CONFIG_HOTPLUG_CPU extern int smp_rescan_cpus(void); extern void __noreturn cpu_die(void); diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h index 83e5d216105e..96879f7ad6da 100644 --- a/arch/s390/include/asm/spinlock.h +++ b/arch/s390/include/asm/spinlock.h @@ -11,18 +11,21 @@ #include <linux/smp.h> +#define SPINLOCK_LOCKVAL (S390_lowcore.spinlock_lockval) + extern int spin_retry; static inline int -_raw_compare_and_swap(volatile unsigned int *lock, - unsigned int old, unsigned int new) +_raw_compare_and_swap(unsigned int *lock, unsigned int old, unsigned int new) { + unsigned int old_expected = old; + asm volatile( " cs %0,%3,%1" : "=d" (old), "=Q" (*lock) : "0" (old), "d" (new), "Q" (*lock) : "cc", "memory" ); - return old; + return old == old_expected; } /* @@ -34,57 +37,69 @@ _raw_compare_and_swap(volatile unsigned int *lock, * (the type definitions are in asm/spinlock_types.h) */ -#define arch_spin_is_locked(x) ((x)->owner_cpu != 0) -#define arch_spin_unlock_wait(lock) \ - do { while (arch_spin_is_locked(lock)) \ - arch_spin_relax(lock); } while (0) +void arch_spin_lock_wait(arch_spinlock_t *); +int arch_spin_trylock_retry(arch_spinlock_t *); +void arch_spin_relax(arch_spinlock_t *); +void arch_spin_lock_wait_flags(arch_spinlock_t *, unsigned long flags); -extern void arch_spin_lock_wait(arch_spinlock_t *); -extern void arch_spin_lock_wait_flags(arch_spinlock_t *, unsigned long flags); -extern int arch_spin_trylock_retry(arch_spinlock_t *); -extern void arch_spin_relax(arch_spinlock_t *lock); +static inline u32 arch_spin_lockval(int cpu) +{ + return ~cpu; +} static inline int arch_spin_value_unlocked(arch_spinlock_t lock) { - return lock.owner_cpu == 0; + return lock.lock == 0; } -static inline void arch_spin_lock(arch_spinlock_t *lp) +static inline int arch_spin_is_locked(arch_spinlock_t *lp) { - int old; + return ACCESS_ONCE(lp->lock) != 0; +} - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return; - arch_spin_lock_wait(lp); +static inline int arch_spin_trylock_once(arch_spinlock_t *lp) +{ + barrier(); + return likely(arch_spin_value_unlocked(*lp) && + _raw_compare_and_swap(&lp->lock, 0, SPINLOCK_LOCKVAL)); } -static inline void arch_spin_lock_flags(arch_spinlock_t *lp, - unsigned long flags) +static inline int arch_spin_tryrelease_once(arch_spinlock_t *lp) { - int old; + return _raw_compare_and_swap(&lp->lock, SPINLOCK_LOCKVAL, 0); +} - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return; - arch_spin_lock_wait_flags(lp, flags); +static inline void arch_spin_lock(arch_spinlock_t *lp) +{ + if (!arch_spin_trylock_once(lp)) + arch_spin_lock_wait(lp); } -static inline int arch_spin_trylock(arch_spinlock_t *lp) +static inline void arch_spin_lock_flags(arch_spinlock_t *lp, + unsigned long flags) { - int old; + if (!arch_spin_trylock_once(lp)) + arch_spin_lock_wait_flags(lp, flags); +} - old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id()); - if (likely(old == 0)) - return 1; - return arch_spin_trylock_retry(lp); +static inline int arch_spin_trylock(arch_spinlock_t *lp) +{ + if (!arch_spin_trylock_once(lp)) + return arch_spin_trylock_retry(lp); + return 1; } static inline void arch_spin_unlock(arch_spinlock_t *lp) { - _raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0); + arch_spin_tryrelease_once(lp); +} + +static inline void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + while (arch_spin_is_locked(lock)) + arch_spin_relax(lock); } - + /* * Read-write spinlocks, allowing multiple readers * but only one writer. @@ -115,42 +130,50 @@ extern void _raw_write_lock_wait(arch_rwlock_t *lp); extern void _raw_write_lock_wait_flags(arch_rwlock_t *lp, unsigned long flags); extern int _raw_write_trylock_retry(arch_rwlock_t *lp); +static inline int arch_read_trylock_once(arch_rwlock_t *rw) +{ + unsigned int old = ACCESS_ONCE(rw->lock); + return likely((int) old >= 0 && + _raw_compare_and_swap(&rw->lock, old, old + 1)); +} + +static inline int arch_write_trylock_once(arch_rwlock_t *rw) +{ + unsigned int old = ACCESS_ONCE(rw->lock); + return likely(old == 0 && + _raw_compare_and_swap(&rw->lock, 0, 0x80000000)); +} + static inline void arch_read_lock(arch_rwlock_t *rw) { - unsigned int old; - old = rw->lock & 0x7fffffffU; - if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old) + if (!arch_read_trylock_once(rw)) _raw_read_lock_wait(rw); } static inline void arch_read_lock_flags(arch_rwlock_t *rw, unsigned long flags) { - unsigned int old; - old = rw->lock & 0x7fffffffU; - if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old) + if (!arch_read_trylock_once(rw)) _raw_read_lock_wait_flags(rw, flags); } static inline void arch_read_unlock(arch_rwlock_t *rw) { - unsigned int old, cmp; + unsigned int old; - old = rw->lock; do { - cmp = old; - old = _raw_compare_and_swap(&rw->lock, old, old - 1); - } while (cmp != old); + old = ACCESS_ONCE(rw->lock); + } while (!_raw_compare_and_swap(&rw->lock, old, old - 1)); } static inline void arch_write_lock(arch_rwlock_t *rw) { - if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0)) + if (!arch_write_trylock_once(rw)) _raw_write_lock_wait(rw); } static inline void arch_write_lock_flags(arch_rwlock_t *rw, unsigned long flags) { - if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0)) + if (!arch_write_trylock_once(rw)) _raw_write_lock_wait_flags(rw, flags); } @@ -161,18 +184,16 @@ static inline void arch_write_unlock(arch_rwlock_t *rw) static inline int arch_read_trylock(arch_rwlock_t *rw) { - unsigned int old; - old = rw->lock & 0x7fffffffU; - if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old)) - return 1; - return _raw_read_trylock_retry(rw); + if (!arch_read_trylock_once(rw)) + return _raw_read_trylock_retry(rw); + return 1; } static inline int arch_write_trylock(arch_rwlock_t *rw) { - if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0)) - return 1; - return _raw_write_trylock_retry(rw); + if (!arch_write_trylock_once(rw)) + return _raw_write_trylock_retry(rw); + return 1; } #define arch_read_relax(lock) cpu_relax() diff --git a/arch/s390/include/asm/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h index 9c76656a0af0..b2cd6ff7c2c5 100644 --- a/arch/s390/include/asm/spinlock_types.h +++ b/arch/s390/include/asm/spinlock_types.h @@ -6,13 +6,13 @@ #endif typedef struct { - volatile unsigned int owner_cpu; + unsigned int lock; } __attribute__ ((aligned (4))) arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { .lock = 0, } typedef struct { - volatile unsigned int lock; + unsigned int lock; } arch_rwlock_t; #define __ARCH_RW_LOCK_UNLOCKED { 0 } diff --git a/arch/s390/include/asm/switch_to.h b/arch/s390/include/asm/switch_to.h index e759181357fc..29c81f82705e 100644 --- a/arch/s390/include/asm/switch_to.h +++ b/arch/s390/include/asm/switch_to.h @@ -132,7 +132,6 @@ static inline void restore_access_regs(unsigned int *acrs) update_cr_regs(next); \ } \ prev = __switch_to(prev,next); \ - update_primary_asce(current); \ } while (0) #define finish_arch_switch(prev) do { \ diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h index 777687055e7b..abad78d5b10c 100644 --- a/arch/s390/include/asm/syscall.h +++ b/arch/s390/include/asm/syscall.h @@ -28,7 +28,7 @@ extern const unsigned int sys_call_table_emu[]; static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { - return test_tsk_thread_flag(task, TIF_SYSCALL) ? + return test_pt_regs_flag(regs, PIF_SYSCALL) ? (regs->int_code & 0xffff) : -1; } diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 50630e6a35de..b833e9c0bfbf 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -77,32 +77,22 @@ static inline struct thread_info *current_thread_info(void) /* * thread information flags bit numbers */ -#define TIF_SYSCALL 0 /* inside a system call */ -#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_TLB_WAIT 4 /* wait for TLB flush completion */ -#define TIF_ASCE 5 /* primary asce needs fixup / uaccess */ -#define TIF_PER_TRAP 6 /* deliver sigtrap on return to user */ -#define TIF_MCCK_PENDING 7 /* machine check handling is pending */ -#define TIF_SYSCALL_TRACE 8 /* syscall trace active */ -#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */ -#define TIF_SECCOMP 10 /* secure computing */ -#define TIF_SYSCALL_TRACEPOINT 11 /* syscall tracepoint instrumentation */ -#define TIF_31BIT 17 /* 32bit process */ -#define TIF_MEMDIE 18 /* is terminating due to OOM killer */ -#define TIF_RESTORE_SIGMASK 19 /* restore signal mask in do_signal() */ -#define TIF_SINGLE_STEP 20 /* This task is single stepped */ -#define TIF_BLOCK_STEP 21 /* This task is block stepped */ +#define TIF_NOTIFY_RESUME 0 /* callback before returning to user */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_SYSCALL_TRACE 3 /* syscall trace active */ +#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */ +#define TIF_SECCOMP 5 /* secure computing */ +#define TIF_SYSCALL_TRACEPOINT 6 /* syscall tracepoint instrumentation */ +#define TIF_31BIT 16 /* 32bit process */ +#define TIF_MEMDIE 17 /* is terminating due to OOM killer */ +#define TIF_RESTORE_SIGMASK 18 /* restore signal mask in do_signal() */ +#define TIF_SINGLE_STEP 19 /* This task is single stepped */ +#define TIF_BLOCK_STEP 20 /* This task is block stepped */ -#define _TIF_SYSCALL (1<<TIF_SYSCALL) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_TLB_WAIT (1<<TIF_TLB_WAIT) -#define _TIF_ASCE (1<<TIF_ASCE) -#define _TIF_PER_TRAP (1<<TIF_PER_TRAP) -#define _TIF_MCCK_PENDING (1<<TIF_MCCK_PENDING) #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1<<TIF_SECCOMP) diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index 05425b18c0aa..56af53093d24 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -26,21 +26,12 @@ extern struct cpu_topology_s390 cpu_topology[NR_CPUS]; #define mc_capable() 1 -static inline const struct cpumask *cpu_coregroup_mask(int cpu) -{ - return &cpu_topology[cpu].core_mask; -} - -static inline const struct cpumask *cpu_book_mask(int cpu) -{ - return &cpu_topology[cpu].book_mask; -} - int topology_cpu_init(struct cpu *); int topology_set_cpu_management(int fc); void topology_schedule_update(void); void store_topology(struct sysinfo_15_1_x *info); void topology_expect_change(void); +const struct cpumask *cpu_coregroup_mask(int cpu); #else /* CONFIG_SCHED_BOOK */ @@ -64,8 +55,6 @@ static inline void s390_init_cpu_topology(void) }; #endif -#define SD_BOOK_INIT SD_CPU_INIT - #include <asm-generic/topology.h> #endif /* _ASM_S390_TOPOLOGY_H */ diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 1be64a1506d0..cd4c68e0398d 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -132,6 +132,34 @@ unsigned long __must_check __copy_to_user(void __user *to, const void *from, #define __copy_to_user_inatomic __copy_to_user #define __copy_from_user_inatomic __copy_from_user +#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES + +#define __put_get_user_asm(to, from, size, spec) \ +({ \ + register unsigned long __reg0 asm("0") = spec; \ + int __rc; \ + \ + asm volatile( \ + "0: mvcos %1,%3,%2\n" \ + "1: xr %0,%0\n" \ + "2:\n" \ + ".pushsection .fixup, \"ax\"\n" \ + "3: lhi %0,%5\n" \ + " jg 2b\n" \ + ".popsection\n" \ + EX_TABLE(0b,3b) EX_TABLE(1b,3b) \ + : "=d" (__rc), "=Q" (*(to)) \ + : "d" (size), "Q" (*(from)), \ + "d" (__reg0), "K" (-EFAULT) \ + : "cc"); \ + __rc; \ +}) + +#define __put_user_fn(x, ptr, size) __put_get_user_asm(ptr, x, size, 0x810000UL) +#define __get_user_fn(x, ptr, size) __put_get_user_asm(x, ptr, size, 0x81UL) + +#else /* CONFIG_HAVE_MARCH_Z10_FEATURES */ + static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size) { size = __copy_to_user(ptr, x, size); @@ -144,6 +172,8 @@ static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long s return size ? -EFAULT : 0; } +#endif /* CONFIG_HAVE_MARCH_Z10_FEATURES */ + /* * These are the main single-value transfer routines. They automatically * use the right size if we just have the right pointer type. diff --git a/arch/s390/include/uapi/asm/kvm.h b/arch/s390/include/uapi/asm/kvm.h index c003c6a73b1e..0fc26430a1e5 100644 --- a/arch/s390/include/uapi/asm/kvm.h +++ b/arch/s390/include/uapi/asm/kvm.h @@ -15,6 +15,7 @@ #include <linux/types.h> #define __KVM_S390 +#define __KVM_HAVE_GUEST_DEBUG /* Device control API: s390-specific devices */ #define KVM_DEV_FLIC_GET_ALL_IRQS 1 @@ -54,6 +55,13 @@ struct kvm_s390_io_adapter_req { __u64 addr; }; +/* kvm attr_group on vm fd */ +#define KVM_S390_VM_MEM_CTRL 0 + +/* kvm attributes for mem_ctrl */ +#define KVM_S390_VM_MEM_ENABLE_CMMA 0 +#define KVM_S390_VM_MEM_CLR_CMMA 1 + /* for KVM_GET_REGS and KVM_SET_REGS */ struct kvm_regs { /* general purpose regs for s390 */ @@ -72,11 +80,31 @@ struct kvm_fpu { __u64 fprs[16]; }; +#define KVM_GUESTDBG_USE_HW_BP 0x00010000 + +#define KVM_HW_BP 1 +#define KVM_HW_WP_WRITE 2 +#define KVM_SINGLESTEP 4 + struct kvm_debug_exit_arch { + __u64 addr; + __u8 type; + __u8 pad[7]; /* Should be set to 0 */ +}; + +struct kvm_hw_breakpoint { + __u64 addr; + __u64 phys_addr; + __u64 len; + __u8 type; + __u8 pad[7]; /* Should be set to 0 */ }; /* for KVM_SET_GUEST_DEBUG */ struct kvm_guest_debug_arch { + __u32 nr_hw_bp; + __u32 pad; /* Should be set to 0 */ + struct kvm_hw_breakpoint __user *hw_bp; }; #define KVM_SYNC_PREFIX (1UL << 0) diff --git a/arch/s390/include/uapi/asm/sie.h b/arch/s390/include/uapi/asm/sie.h new file mode 100644 index 000000000000..3d97f610198d --- /dev/null +++ b/arch/s390/include/uapi/asm/sie.h @@ -0,0 +1,245 @@ +#ifndef _UAPI_ASM_S390_SIE_H +#define _UAPI_ASM_S390_SIE_H + +#include <asm/sigp.h> + +#define diagnose_codes \ + { 0x10, "DIAG (0x10) release pages" }, \ + { 0x44, "DIAG (0x44) time slice end" }, \ + { 0x9c, "DIAG (0x9c) time slice end directed" }, \ + { 0x204, "DIAG (0x204) logical-cpu utilization" }, \ + { 0x258, "DIAG (0x258) page-reference services" }, \ + { 0x308, "DIAG (0x308) ipl functions" }, \ + { 0x500, "DIAG (0x500) KVM virtio functions" }, \ + { 0x501, "DIAG (0x501) KVM breakpoint" } + +#define sigp_order_codes \ + { SIGP_SENSE, "SIGP sense" }, \ + { SIGP_EXTERNAL_CALL, "SIGP external call" }, \ + { SIGP_EMERGENCY_SIGNAL, "SIGP emergency signal" }, \ + { SIGP_STOP, "SIGP stop" }, \ + { SIGP_STOP_AND_STORE_STATUS, "SIGP stop and store status" }, \ + { SIGP_SET_ARCHITECTURE, "SIGP set architecture" }, \ + { SIGP_SET_PREFIX, "SIGP set prefix" }, \ + { SIGP_SENSE_RUNNING, "SIGP sense running" }, \ + { SIGP_RESTART, "SIGP restart" }, \ + { SIGP_INITIAL_CPU_RESET, "SIGP initial cpu reset" }, \ + { SIGP_STORE_STATUS_AT_ADDRESS, "SIGP store status at address" } + +#define icpt_prog_codes \ + { 0x0001, "Prog Operation" }, \ + { 0x0002, "Prog Privileged Operation" }, \ + { 0x0003, "Prog Execute" }, \ + { 0x0004, "Prog Protection" }, \ + { 0x0005, "Prog Addressing" }, \ + { 0x0006, "Prog Specification" }, \ + { 0x0007, "Prog Data" }, \ + { 0x0008, "Prog Fixedpoint overflow" }, \ + { 0x0009, "Prog Fixedpoint divide" }, \ + { 0x000A, "Prog Decimal overflow" }, \ + { 0x000B, "Prog Decimal divide" }, \ + { 0x000C, "Prog HFP exponent overflow" }, \ + { 0x000D, "Prog HFP exponent underflow" }, \ + { 0x000E, "Prog HFP significance" }, \ + { 0x000F, "Prog HFP divide" }, \ + { 0x0010, "Prog Segment translation" }, \ + { 0x0011, "Prog Page translation" }, \ + { 0x0012, "Prog Translation specification" }, \ + { 0x0013, "Prog Special operation" }, \ + { 0x0015, "Prog Operand" }, \ + { 0x0016, "Prog Trace table" }, \ + { 0x0017, "Prog ASNtranslation specification" }, \ + { 0x001C, "Prog Spaceswitch event" }, \ + { 0x001D, "Prog HFP square root" }, \ + { 0x001F, "Prog PCtranslation specification" }, \ + { 0x0020, "Prog AFX translation" }, \ + { 0x0021, "Prog ASX translation" }, \ + { 0x0022, "Prog LX translation" }, \ + { 0x0023, "Prog EX translation" }, \ + { 0x0024, "Prog Primary authority" }, \ + { 0x0025, "Prog Secondary authority" }, \ + { 0x0026, "Prog LFXtranslation exception" }, \ + { 0x0027, "Prog LSXtranslation exception" }, \ + { 0x0028, "Prog ALET specification" }, \ + { 0x0029, "Prog ALEN translation" }, \ + { 0x002A, "Prog ALE sequence" }, \ + { 0x002B, "Prog ASTE validity" }, \ + { 0x002C, "Prog ASTE sequence" }, \ + { 0x002D, "Prog Extended authority" }, \ + { 0x002E, "Prog LSTE sequence" }, \ + { 0x002F, "Prog ASTE instance" }, \ + { 0x0030, "Prog Stack full" }, \ + { 0x0031, "Prog Stack empty" }, \ + { 0x0032, "Prog Stack specification" }, \ + { 0x0033, "Prog Stack type" }, \ + { 0x0034, "Prog Stack operation" }, \ + { 0x0039, "Prog Region first translation" }, \ + { 0x003A, "Prog Region second translation" }, \ + { 0x003B, "Prog Region third translation" }, \ + { 0x0040, "Prog Monitor event" }, \ + { 0x0080, "Prog PER event" }, \ + { 0x0119, "Prog Crypto operation" } + +#define exit_code_ipa0(ipa0, opcode, mnemonic) \ + { (ipa0 << 8 | opcode), #ipa0 " " mnemonic } +#define exit_code(opcode, mnemonic) \ + { opcode, mnemonic } + +#define icpt_insn_codes \ + exit_code_ipa0(0x01, 0x01, "PR"), \ + exit_code_ipa0(0x01, 0x04, "PTFF"), \ + exit_code_ipa0(0x01, 0x07, "SCKPF"), \ + exit_code_ipa0(0xAA, 0x00, "RINEXT"), \ + exit_code_ipa0(0xAA, 0x01, "RION"), \ + exit_code_ipa0(0xAA, 0x02, "TRIC"), \ + exit_code_ipa0(0xAA, 0x03, "RIOFF"), \ + exit_code_ipa0(0xAA, 0x04, "RIEMIT"), \ + exit_code_ipa0(0xB2, 0x02, "STIDP"), \ + exit_code_ipa0(0xB2, 0x04, "SCK"), \ + exit_code_ipa0(0xB2, 0x05, "STCK"), \ + exit_code_ipa0(0xB2, 0x06, "SCKC"), \ + exit_code_ipa0(0xB2, 0x07, "STCKC"), \ + exit_code_ipa0(0xB2, 0x08, "SPT"), \ + exit_code_ipa0(0xB2, 0x09, "STPT"), \ + exit_code_ipa0(0xB2, 0x0d, "PTLB"), \ + exit_code_ipa0(0xB2, 0x10, "SPX"), \ + exit_code_ipa0(0xB2, 0x11, "STPX"), \ + exit_code_ipa0(0xB2, 0x12, "STAP"), \ + exit_code_ipa0(0xB2, 0x14, "SIE"), \ + exit_code_ipa0(0xB2, 0x16, "SETR"), \ + exit_code_ipa0(0xB2, 0x17, "STETR"), \ + exit_code_ipa0(0xB2, 0x18, "PC"), \ + exit_code_ipa0(0xB2, 0x20, "SERVC"), \ + exit_code_ipa0(0xB2, 0x28, "PT"), \ + exit_code_ipa0(0xB2, 0x29, "ISKE"), \ + exit_code_ipa0(0xB2, 0x2a, "RRBE"), \ + exit_code_ipa0(0xB2, 0x2b, "SSKE"), \ + exit_code_ipa0(0xB2, 0x2c, "TB"), \ + exit_code_ipa0(0xB2, 0x2e, "PGIN"), \ + exit_code_ipa0(0xB2, 0x2f, "PGOUT"), \ + exit_code_ipa0(0xB2, 0x30, "CSCH"), \ + exit_code_ipa0(0xB2, 0x31, "HSCH"), \ + exit_code_ipa0(0xB2, 0x32, "MSCH"), \ + exit_code_ipa0(0xB2, 0x33, "SSCH"), \ + exit_code_ipa0(0xB2, 0x34, "STSCH"), \ + exit_code_ipa0(0xB2, 0x35, "TSCH"), \ + exit_code_ipa0(0xB2, 0x36, "TPI"), \ + exit_code_ipa0(0xB2, 0x37, "SAL"), \ + exit_code_ipa0(0xB2, 0x38, "RSCH"), \ + exit_code_ipa0(0xB2, 0x39, "STCRW"), \ + exit_code_ipa0(0xB2, 0x3a, "STCPS"), \ + exit_code_ipa0(0xB2, 0x3b, "RCHP"), \ + exit_code_ipa0(0xB2, 0x3c, "SCHM"), \ + exit_code_ipa0(0xB2, 0x40, "BAKR"), \ + exit_code_ipa0(0xB2, 0x48, "PALB"), \ + exit_code_ipa0(0xB2, 0x4c, "TAR"), \ + exit_code_ipa0(0xB2, 0x50, "CSP"), \ + exit_code_ipa0(0xB2, 0x54, "MVPG"), \ + exit_code_ipa0(0xB2, 0x58, "BSG"), \ + exit_code_ipa0(0xB2, 0x5a, "BSA"), \ + exit_code_ipa0(0xB2, 0x5f, "CHSC"), \ + exit_code_ipa0(0xB2, 0x74, "SIGA"), \ + exit_code_ipa0(0xB2, 0x76, "XSCH"), \ + exit_code_ipa0(0xB2, 0x78, "STCKE"), \ + exit_code_ipa0(0xB2, 0x7c, "STCKF"), \ + exit_code_ipa0(0xB2, 0x7d, "STSI"), \ + exit_code_ipa0(0xB2, 0xb0, "STFLE"), \ + exit_code_ipa0(0xB2, 0xb1, "STFL"), \ + exit_code_ipa0(0xB2, 0xb2, "LPSWE"), \ + exit_code_ipa0(0xB2, 0xf8, "TEND"), \ + exit_code_ipa0(0xB2, 0xfc, "TABORT"), \ + exit_code_ipa0(0xB9, 0x1e, "KMAC"), \ + exit_code_ipa0(0xB9, 0x28, "PCKMO"), \ + exit_code_ipa0(0xB9, 0x2a, "KMF"), \ + exit_code_ipa0(0xB9, 0x2b, "KMO"), \ + exit_code_ipa0(0xB9, 0x2d, "KMCTR"), \ + exit_code_ipa0(0xB9, 0x2e, "KM"), \ + exit_code_ipa0(0xB9, 0x2f, "KMC"), \ + exit_code_ipa0(0xB9, 0x3e, "KIMD"), \ + exit_code_ipa0(0xB9, 0x3f, "KLMD"), \ + exit_code_ipa0(0xB9, 0x8a, "CSPG"), \ + exit_code_ipa0(0xB9, 0x8d, "EPSW"), \ + exit_code_ipa0(0xB9, 0x8e, "IDTE"), \ + exit_code_ipa0(0xB9, 0x8f, "CRDTE"), \ + exit_code_ipa0(0xB9, 0x9c, "EQBS"), \ + exit_code_ipa0(0xB9, 0xa2, "PTF"), \ + exit_code_ipa0(0xB9, 0xab, "ESSA"), \ + exit_code_ipa0(0xB9, 0xae, "RRBM"), \ + exit_code_ipa0(0xB9, 0xaf, "PFMF"), \ + exit_code_ipa0(0xE3, 0x03, "LRAG"), \ + exit_code_ipa0(0xE3, 0x13, "LRAY"), \ + exit_code_ipa0(0xE3, 0x25, "NTSTG"), \ + exit_code_ipa0(0xE5, 0x00, "LASP"), \ + exit_code_ipa0(0xE5, 0x01, "TPROT"), \ + exit_code_ipa0(0xE5, 0x60, "TBEGIN"), \ + exit_code_ipa0(0xE5, 0x61, "TBEGINC"), \ + exit_code_ipa0(0xEB, 0x25, "STCTG"), \ + exit_code_ipa0(0xEB, 0x2f, "LCTLG"), \ + exit_code_ipa0(0xEB, 0x60, "LRIC"), \ + exit_code_ipa0(0xEB, 0x61, "STRIC"), \ + exit_code_ipa0(0xEB, 0x62, "MRIC"), \ + exit_code_ipa0(0xEB, 0x8a, "SQBS"), \ + exit_code_ipa0(0xC8, 0x01, "ECTG"), \ + exit_code(0x0a, "SVC"), \ + exit_code(0x80, "SSM"), \ + exit_code(0x82, "LPSW"), \ + exit_code(0x83, "DIAG"), \ + exit_code(0xae, "SIGP"), \ + exit_code(0xac, "STNSM"), \ + exit_code(0xad, "STOSM"), \ + exit_code(0xb1, "LRA"), \ + exit_code(0xb6, "STCTL"), \ + exit_code(0xb7, "LCTL"), \ + exit_code(0xee, "PLO") + +#define sie_intercept_code \ + { 0x00, "Host interruption" }, \ + { 0x04, "Instruction" }, \ + { 0x08, "Program interruption" }, \ + { 0x0c, "Instruction and program interruption" }, \ + { 0x10, "External request" }, \ + { 0x14, "External interruption" }, \ + { 0x18, "I/O request" }, \ + { 0x1c, "Wait state" }, \ + { 0x20, "Validity" }, \ + { 0x28, "Stop request" }, \ + { 0x2c, "Operation exception" }, \ + { 0x38, "Partial-execution" }, \ + { 0x3c, "I/O interruption" }, \ + { 0x40, "I/O instruction" }, \ + { 0x48, "Timing subset" } + +/* + * This is the simple interceptable instructions decoder. + * + * It will be used as userspace interface and it can be used in places + * that does not allow to use general decoder functions, + * such as trace events declarations. + * + * Some userspace tools may want to parse this code + * and would be confused by switch(), if() and other statements, + * but they can understand conditional operator. + */ +#define INSN_DECODE_IPA0(ipa0, insn, rshift, mask) \ + (insn >> 56) == (ipa0) ? \ + ((ipa0 << 8) | ((insn >> rshift) & mask)) : + +#define INSN_DECODE(insn) (insn >> 56) + +/* + * The macro icpt_insn_decoder() takes an intercepted instruction + * and returns a key, which can be used to find a mnemonic name + * of the instruction in the icpt_insn_codes table. + */ +#define icpt_insn_decoder(insn) \ + INSN_DECODE_IPA0(0x01, insn, 48, 0xff) \ + INSN_DECODE_IPA0(0xaa, insn, 48, 0x0f) \ + INSN_DECODE_IPA0(0xb2, insn, 48, 0xff) \ + INSN_DECODE_IPA0(0xb9, insn, 48, 0xff) \ + INSN_DECODE_IPA0(0xe3, insn, 48, 0xff) \ + INSN_DECODE_IPA0(0xe5, insn, 48, 0xff) \ + INSN_DECODE_IPA0(0xeb, insn, 16, 0xff) \ + INSN_DECODE_IPA0(0xc8, insn, 48, 0x0f) \ + INSN_DECODE(insn) + +#endif /* _UAPI_ASM_S390_SIE_H */ diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index cc10cdd4d6a2..afe1715a4eb7 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -50,6 +50,7 @@ int main(void) DEFINE(__PT_INT_CODE, offsetof(struct pt_regs, int_code)); DEFINE(__PT_INT_PARM, offsetof(struct pt_regs, int_parm)); DEFINE(__PT_INT_PARM_LONG, offsetof(struct pt_regs, int_parm_long)); + DEFINE(__PT_FLAGS, offsetof(struct pt_regs, flags)); DEFINE(__PT_SIZE, sizeof(struct pt_regs)); BLANK(); DEFINE(__SF_BACKCHAIN, offsetof(struct stack_frame, back_chain)); @@ -89,16 +90,22 @@ int main(void) DEFINE(__LC_PGM_ILC, offsetof(struct _lowcore, pgm_ilc)); DEFINE(__LC_PGM_INT_CODE, offsetof(struct _lowcore, pgm_code)); DEFINE(__LC_TRANS_EXC_CODE, offsetof(struct _lowcore, trans_exc_code)); - DEFINE(__LC_PER_CAUSE, offsetof(struct _lowcore, per_perc_atmid)); + DEFINE(__LC_MON_CLASS_NR, offsetof(struct _lowcore, mon_class_num)); + DEFINE(__LC_PER_CODE, offsetof(struct _lowcore, per_code)); + DEFINE(__LC_PER_ATMID, offsetof(struct _lowcore, per_atmid)); DEFINE(__LC_PER_ADDRESS, offsetof(struct _lowcore, per_address)); - DEFINE(__LC_PER_PAID, offsetof(struct _lowcore, per_access_id)); - DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_access_id)); + DEFINE(__LC_EXC_ACCESS_ID, offsetof(struct _lowcore, exc_access_id)); + DEFINE(__LC_PER_ACCESS_ID, offsetof(struct _lowcore, per_access_id)); + DEFINE(__LC_OP_ACCESS_ID, offsetof(struct _lowcore, op_access_id)); + DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_mode_id)); + DEFINE(__LC_MON_CODE, offsetof(struct _lowcore, monitor_code)); DEFINE(__LC_SUBCHANNEL_ID, offsetof(struct _lowcore, subchannel_id)); DEFINE(__LC_SUBCHANNEL_NR, offsetof(struct _lowcore, subchannel_nr)); DEFINE(__LC_IO_INT_PARM, offsetof(struct _lowcore, io_int_parm)); DEFINE(__LC_IO_INT_WORD, offsetof(struct _lowcore, io_int_word)); DEFINE(__LC_STFL_FAC_LIST, offsetof(struct _lowcore, stfl_fac_list)); DEFINE(__LC_MCCK_CODE, offsetof(struct _lowcore, mcck_interruption_code)); + DEFINE(__LC_MCCK_EXT_DAM_CODE, offsetof(struct _lowcore, external_damage_code)); DEFINE(__LC_RST_OLD_PSW, offsetof(struct _lowcore, restart_old_psw)); DEFINE(__LC_EXT_OLD_PSW, offsetof(struct _lowcore, external_old_psw)); DEFINE(__LC_SVC_OLD_PSW, offsetof(struct _lowcore, svc_old_psw)); @@ -115,6 +122,7 @@ int main(void) DEFINE(__LC_SAVE_AREA_SYNC, offsetof(struct _lowcore, save_area_sync)); DEFINE(__LC_SAVE_AREA_ASYNC, offsetof(struct _lowcore, save_area_async)); DEFINE(__LC_SAVE_AREA_RESTART, offsetof(struct _lowcore, save_area_restart)); + DEFINE(__LC_CPU_FLAGS, offsetof(struct _lowcore, cpu_flags)); DEFINE(__LC_RETURN_PSW, offsetof(struct _lowcore, return_psw)); DEFINE(__LC_RETURN_MCCK_PSW, offsetof(struct _lowcore, return_mcck_psw)); DEFINE(__LC_SYNC_ENTER_TIMER, offsetof(struct _lowcore, sync_enter_timer)); @@ -142,7 +150,6 @@ int main(void) DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func)); - DEFINE(__LC_IRB, offsetof(struct _lowcore, irb)); DEFINE(__LC_DUMP_REIPL, offsetof(struct _lowcore, ipib)); BLANK(); DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area)); @@ -156,6 +163,8 @@ int main(void) #ifdef CONFIG_32BIT DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, extended_save_area_addr)); #else /* CONFIG_32BIT */ + DEFINE(__LC_DATA_EXC_CODE, offsetof(struct _lowcore, data_exc_code)); + DEFINE(__LC_MCCK_FAIL_STOR_ADDR, offsetof(struct _lowcore, failing_storage_address)); DEFINE(__LC_EXT_PARAMS2, offsetof(struct _lowcore, ext_params2)); DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, floating_pt_save_area)); DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste)); diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index 7df5ed9f44d7..f204d6920368 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -213,7 +213,7 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs) sizeof(current->thread.fp_regs)); restore_fp_regs(current->thread.fp_regs.fprs); - clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */ + clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */ return 0; } diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index d7658c4b2ed5..a3b9150e6802 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/bootmem.h> #include <linux/elf.h> +#include <linux/memblock.h> #include <asm/os_info.h> #include <asm/elf.h> #include <asm/ipl.h> @@ -22,6 +23,24 @@ #define PTR_SUB(x, y) (((char *) (x)) - ((unsigned long) (y))) #define PTR_DIFF(x, y) ((unsigned long)(((char *) (x)) - ((unsigned long) (y)))) +static struct memblock_region oldmem_region; + +static struct memblock_type oldmem_type = { + .cnt = 1, + .max = 1, + .total_size = 0, + .regions = &oldmem_region, +}; + +#define for_each_dump_mem_range(i, nid, p_start, p_end, p_nid) \ + for (i = 0, __next_mem_range(&i, nid, &memblock.physmem, \ + &oldmem_type, p_start, \ + p_end, p_nid); \ + i != (u64)ULLONG_MAX; \ + __next_mem_range(&i, nid, &memblock.physmem, \ + &oldmem_type, \ + p_start, p_end, p_nid)) + struct dump_save_areas dump_save_areas; /* @@ -264,19 +283,6 @@ static void *kzalloc_panic(int len) } /* - * Get memory layout and create hole for oldmem - */ -static struct mem_chunk *get_memory_layout(void) -{ - struct mem_chunk *chunk_array; - - chunk_array = kzalloc_panic(MEMORY_CHUNKS * sizeof(struct mem_chunk)); - detect_memory_layout(chunk_array, 0); - create_mem_hole(chunk_array, OLDMEM_BASE, OLDMEM_SIZE); - return chunk_array; -} - -/* * Initialize ELF note */ static void *nt_init(void *buf, Elf64_Word type, void *desc, int d_len, @@ -490,52 +496,33 @@ static int get_cpu_cnt(void) */ static int get_mem_chunk_cnt(void) { - struct mem_chunk *chunk_array, *mem_chunk; - int i, cnt = 0; + int cnt = 0; + u64 idx; - chunk_array = get_memory_layout(); - for (i = 0; i < MEMORY_CHUNKS; i++) { - mem_chunk = &chunk_array[i]; - if (chunk_array[i].type != CHUNK_READ_WRITE && - chunk_array[i].type != CHUNK_READ_ONLY) - continue; - if (mem_chunk->size == 0) - continue; + for_each_dump_mem_range(idx, NUMA_NO_NODE, NULL, NULL, NULL) cnt++; - } - kfree(chunk_array); return cnt; } /* * Initialize ELF loads (new kernel) */ -static int loads_init(Elf64_Phdr *phdr, u64 loads_offset) +static void loads_init(Elf64_Phdr *phdr, u64 loads_offset) { - struct mem_chunk *chunk_array, *mem_chunk; - int i; + phys_addr_t start, end; + u64 idx; - chunk_array = get_memory_layout(); - for (i = 0; i < MEMORY_CHUNKS; i++) { - mem_chunk = &chunk_array[i]; - if (mem_chunk->size == 0) - continue; - if (chunk_array[i].type != CHUNK_READ_WRITE && - chunk_array[i].type != CHUNK_READ_ONLY) - continue; - else - phdr->p_filesz = mem_chunk->size; + for_each_dump_mem_range(idx, NUMA_NO_NODE, &start, &end, NULL) { + phdr->p_filesz = end - start; phdr->p_type = PT_LOAD; - phdr->p_offset = mem_chunk->addr; - phdr->p_vaddr = mem_chunk->addr; - phdr->p_paddr = mem_chunk->addr; - phdr->p_memsz = mem_chunk->size; + phdr->p_offset = start; + phdr->p_vaddr = start; + phdr->p_paddr = start; + phdr->p_memsz = end - start; phdr->p_flags = PF_R | PF_W | PF_X; phdr->p_align = PAGE_SIZE; phdr++; } - kfree(chunk_array); - return i; } /* @@ -584,6 +571,14 @@ int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size) /* If we cannot get HSA size for zfcpdump return error */ if (ipl_info.type == IPL_TYPE_FCP_DUMP && !sclp_get_hsa_size()) return -ENODEV; + + /* For kdump, exclude previous crashkernel memory */ + if (OLDMEM_BASE) { + oldmem_region.base = OLDMEM_BASE; + oldmem_region.size = OLDMEM_SIZE; + oldmem_type.total_size = OLDMEM_SIZE; + } + mem_chunk_cnt = get_mem_chunk_cnt(); alloc_size = 0x1000 + get_cpu_cnt() * 0x300 + diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index a734f3585ceb..0dff972a169c 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -258,13 +258,19 @@ static __init void setup_topology(void) static void early_pgm_check_handler(void) { const struct exception_table_entry *fixup; + unsigned long cr0, cr0_new; unsigned long addr; addr = S390_lowcore.program_old_psw.addr; fixup = search_exception_tables(addr & PSW_ADDR_INSN); if (!fixup) disabled_wait(0); + /* Disable low address protection before storing into lowcore. */ + __ctl_store(cr0, 0, 0); + cr0_new = cr0 & ~(1UL << 28); + __ctl_load(cr0_new, 0, 0); S390_lowcore.program_old_psw.addr = extable_fixup(fixup)|PSW_ADDR_AMODE; + __ctl_load(cr0, 0, 0); } static noinline __init void setup_lowcore_early(void) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1662038516c0..70203265196f 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -10,6 +10,7 @@ #include <linux/init.h> #include <linux/linkage.h> +#include <asm/processor.h> #include <asm/cache.h> #include <asm/errno.h> #include <asm/ptrace.h> @@ -37,18 +38,16 @@ __PT_R13 = __PT_GPRS + 524 __PT_R14 = __PT_GPRS + 56 __PT_R15 = __PT_GPRS + 60 -_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ - _TIF_MCCK_PENDING | _TIF_PER_TRAP | _TIF_ASCE) -_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ - _TIF_MCCK_PENDING | _TIF_ASCE) -_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ - _TIF_SYSCALL_TRACEPOINT) -_TIF_TRANSFER = (_TIF_MCCK_PENDING | _TIF_TLB_WAIT) - STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE +_TIF_WORK = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED) +_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ + _TIF_SYSCALL_TRACEPOINT) +_CIF_WORK = (_CIF_MCCK_PENDING | _CIF_ASCE) +_PIF_WORK = (_PIF_PER_TRAP) + #define BASED(name) name-system_call(%r13) .macro TRACE_IRQS_ON @@ -160,13 +159,7 @@ ENTRY(__switch_to) lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 mvc __LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next l %r15,__THREAD_ksp(%r3) # load kernel stack of next - lhi %r6,_TIF_TRANSFER # transfer TIF bits - n %r6,__TI_flags(%r4) # isolate TIF bits - jz 0f - o %r6,__TI_flags(%r5) # set TIF bits of next - st %r6,__TI_flags(%r5) - ni __TI_flags+3(%r4),255-_TIF_TRANSFER # clear TIF bits of prev -0: lm %r6,%r15,__SF_GPRS(%r15) # load gprs of next task + lm %r6,%r15,__SF_GPRS(%r15) # load gprs of next task br %r14 __critical_start: @@ -181,6 +174,7 @@ sysc_stm: stm %r8,%r15,__LC_SAVE_AREA_SYNC l %r12,__LC_THREAD_INFO l %r13,__LC_SVC_NEW_PSW+4 + lhi %r14,_PIF_SYSCALL sysc_per: l %r15,__LC_KERNEL_STACK la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs @@ -190,8 +184,8 @@ sysc_vtime: mvc __PT_R8(32,%r11),__LC_SAVE_AREA_SYNC mvc __PT_PSW(8,%r11),__LC_SVC_OLD_PSW mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC + st %r14,__PT_FLAGS(%r11) sysc_do_svc: - oi __TI_flags+3(%r12),_TIF_SYSCALL l %r10,__TI_sysc_table(%r12) # 31 bit system call table lh %r8,__PT_INT_CODE+2(%r11) sla %r8,2 # shift and test for svc0 @@ -207,7 +201,7 @@ sysc_nr_ok: st %r2,__PT_ORIG_GPR2(%r11) st %r7,STACK_FRAME_OVERHEAD(%r15) l %r9,0(%r8,%r10) # get system call addr. - tm __TI_flags+2(%r12),_TIF_TRACE >> 8 + tm __TI_flags+3(%r12),_TIF_TRACE jnz sysc_tracesys basr %r14,%r9 # call sys_xxxx st %r2,__PT_R2(%r11) # store return value @@ -217,9 +211,12 @@ sysc_return: sysc_tif: tm __PT_PSW+1(%r11),0x01 # returning to user ? jno sysc_restore - tm __TI_flags+3(%r12),_TIF_WORK_SVC - jnz sysc_work # check for work - ni __TI_flags+3(%r12),255-_TIF_SYSCALL + tm __PT_FLAGS+3(%r11),_PIF_WORK + jnz sysc_work + tm __TI_flags+3(%r12),_TIF_WORK + jnz sysc_work # check for thread work + tm __LC_CPU_FLAGS+3,_CIF_WORK + jnz sysc_work sysc_restore: mvc __LC_RETURN_PSW(8),__PT_PSW(%r11) stpt __LC_EXIT_TIMER @@ -231,17 +228,17 @@ sysc_done: # One of the work bits is on. Find out which one. # sysc_work: - tm __TI_flags+3(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+3,_CIF_MCCK_PENDING jo sysc_mcck_pending tm __TI_flags+3(%r12),_TIF_NEED_RESCHED jo sysc_reschedule - tm __TI_flags+3(%r12),_TIF_PER_TRAP + tm __PT_FLAGS+3(%r11),_PIF_PER_TRAP jo sysc_singlestep tm __TI_flags+3(%r12),_TIF_SIGPENDING jo sysc_sigpending tm __TI_flags+3(%r12),_TIF_NOTIFY_RESUME jo sysc_notify_resume - tm __TI_flags+3(%r12),_TIF_ASCE + tm __LC_CPU_FLAGS+3,_CIF_ASCE jo sysc_uaccess j sysc_return # beware of critical section cleanup @@ -254,7 +251,7 @@ sysc_reschedule: br %r1 # call schedule # -# _TIF_MCCK_PENDING is set, call handler +# _CIF_MCCK_PENDING is set, call handler # sysc_mcck_pending: l %r1,BASED(.Lhandle_mcck) @@ -262,10 +259,10 @@ sysc_mcck_pending: br %r1 # TIF bit will be cleared by handler # -# _TIF_ASCE is set, load user space asce +# _CIF_ASCE is set, load user space asce # sysc_uaccess: - ni __TI_flags+3(%r12),255-_TIF_ASCE + ni __LC_CPU_FLAGS+3,255-_CIF_ASCE lctl %c1,%c1,__LC_USER_ASCE # load primary asce j sysc_return @@ -276,7 +273,7 @@ sysc_sigpending: lr %r2,%r11 # pass pointer to pt_regs l %r1,BASED(.Ldo_signal) basr %r14,%r1 # call do_signal - tm __TI_flags+3(%r12),_TIF_SYSCALL + tm __PT_FLAGS+3(%r11),_PIF_SYSCALL jno sysc_return lm %r2,%r7,__PT_R2(%r11) # load svc arguments l %r10,__TI_sysc_table(%r12) # 31 bit system call table @@ -297,10 +294,10 @@ sysc_notify_resume: br %r1 # call do_notify_resume # -# _TIF_PER_TRAP is set, call do_per_trap +# _PIF_PER_TRAP is set, call do_per_trap # sysc_singlestep: - ni __TI_flags+3(%r12),255-_TIF_PER_TRAP + ni __PT_FLAGS+3(%r11),255-_PIF_PER_TRAP lr %r2,%r11 # pass pointer to pt_regs l %r1,BASED(.Ldo_per_trap) la %r14,BASED(sysc_return) @@ -330,7 +327,7 @@ sysc_tracego: basr %r14,%r9 # call sys_xxx st %r2,__PT_R2(%r11) # store return value sysc_tracenogo: - tm __TI_flags+2(%r12),_TIF_TRACE >> 8 + tm __TI_flags+3(%r12),_TIF_TRACE jz sysc_return l %r1,BASED(.Ltrace_exit) lr %r2,%r11 # pass pointer to pt_regs @@ -384,15 +381,16 @@ ENTRY(pgm_check_handler) stm %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC mvc __PT_INT_PARM_LONG(4,%r11),__LC_TRANS_EXC_CODE + xc __PT_FLAGS(4,%r11),__PT_FLAGS(%r11) tm __LC_PGM_ILC+3,0x80 # check for per exception jz 0f l %r1,__TI_task(%r12) tmh %r8,0x0001 # kernel per event ? jz pgm_kprobe - oi __TI_flags+3(%r12),_TIF_PER_TRAP + oi __PT_FLAGS+3(%r11),_PIF_PER_TRAP mvc __THREAD_per_address(4,%r1),__LC_PER_ADDRESS - mvc __THREAD_per_cause(2,%r1),__LC_PER_CAUSE - mvc __THREAD_per_paid(1,%r1),__LC_PER_PAID + mvc __THREAD_per_cause(2,%r1),__LC_PER_CODE + mvc __THREAD_per_paid(1,%r1),__LC_PER_ACCESS_ID 0: REENABLE_IRQS xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) l %r1,BASED(.Ljump_table) @@ -420,9 +418,9 @@ pgm_kprobe: # single stepped system call # pgm_svcper: - oi __TI_flags+3(%r12),_TIF_PER_TRAP mvc __LC_RETURN_PSW(4),__LC_SVC_NEW_PSW mvc __LC_RETURN_PSW+4(4),BASED(.Lsysc_per) + lhi %r14,_PIF_SYSCALL | _PIF_PER_TRAP lpsw __LC_RETURN_PSW # branch to sysc_per and enable irqs /* @@ -445,6 +443,7 @@ io_skip: mvc __PT_R8(32,%r11),__LC_SAVE_AREA_ASYNC stm %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID + xc __PT_FLAGS(4,%r11),__PT_FLAGS(%r11) TRACE_IRQS_OFF xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) io_loop: @@ -466,8 +465,10 @@ io_return: LOCKDEP_SYS_EXIT TRACE_IRQS_ON io_tif: - tm __TI_flags+3(%r12),_TIF_WORK_INT + tm __TI_flags+3(%r12),_TIF_WORK jnz io_work # there is work to do (signals etc.) + tm __LC_CPU_FLAGS+3,_CIF_WORK + jnz io_work io_restore: mvc __LC_RETURN_PSW(8),__PT_PSW(%r11) stpt __LC_EXIT_TIMER @@ -477,7 +478,7 @@ io_done: # # There is work todo, find out in which context we have been interrupted: -# 1) if we return to user space we can do all _TIF_WORK_INT work +# 1) if we return to user space we can do all _TIF_WORK work # 2) if we return to kernel code and preemptive scheduling is enabled check # the preemption counter and if it is zero call preempt_schedule_irq # Before any work can be done, a switch to the kernel stack is required. @@ -520,11 +521,9 @@ io_work_user: # # One of the work bits is on. Find out which one. -# Checked are: _TIF_SIGPENDING, _TIF_NOTIFY_RESUME, _TIF_NEED_RESCHED -# and _TIF_MCCK_PENDING # io_work_tif: - tm __TI_flags+3(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+3(%r12),_CIF_MCCK_PENDING jo io_mcck_pending tm __TI_flags+3(%r12),_TIF_NEED_RESCHED jo io_reschedule @@ -532,12 +531,12 @@ io_work_tif: jo io_sigpending tm __TI_flags+3(%r12),_TIF_NOTIFY_RESUME jo io_notify_resume - tm __TI_flags+3(%r12),_TIF_ASCE + tm __LC_CPU_FLAGS+3,_CIF_ASCE jo io_uaccess j io_return # beware of critical section cleanup # -# _TIF_MCCK_PENDING is set, call handler +# _CIF_MCCK_PENDING is set, call handler # io_mcck_pending: # TRACE_IRQS_ON already done at io_return @@ -547,10 +546,10 @@ io_mcck_pending: j io_return # -# _TIF_ASCE is set, load user space asce +# _CIF_ASCE is set, load user space asce # io_uaccess: - ni __TI_flags+3(%r12),255-_TIF_ASCE + ni __LC_CPU_FLAGS+3,255-_CIF_ASCE lctl %c1,%c1,__LC_USER_ASCE # load primary asce j io_return @@ -613,6 +612,7 @@ ext_skip: stm %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS + xc __PT_FLAGS(4,%r11),__PT_FLAGS(%r11) TRACE_IRQS_OFF l %r1,BASED(.Ldo_IRQ) lr %r2,%r11 # pass pointer to pt_regs @@ -677,6 +677,7 @@ mcck_skip: stm %r0,%r7,__PT_R0(%r11) mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32 stm %r8,%r9,__PT_PSW(%r11) + xc __PT_FLAGS(4,%r11),__PT_FLAGS(%r11) xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) l %r1,BASED(.Ldo_machine_check) lr %r2,%r11 # pass pointer to pt_regs @@ -689,7 +690,7 @@ mcck_skip: la %r11,STACK_FRAME_OVERHEAD(%r15) lr %r15,%r1 ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off - tm __TI_flags+3(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+3,_CIF_MCCK_PENDING jno mcck_return TRACE_IRQS_OFF l %r1,BASED(.Lhandle_mcck) @@ -842,6 +843,8 @@ cleanup_system_call: stm %r0,%r7,__PT_R0(%r9) mvc __PT_PSW(8,%r9),__LC_SVC_OLD_PSW mvc __PT_INT_CODE(4,%r9),__LC_SVC_ILC + xc __PT_FLAGS(4,%r9),__PT_FLAGS(%r9) + mvi __PT_FLAGS+3(%r9),_PIF_SYSCALL # setup saved register 15 st %r15,28(%r11) # r15 stack pointer # set new psw address and exit diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 5963e43618bb..f2e674c702e1 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -42,13 +42,11 @@ STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER STACK_SIZE = 1 << STACK_SHIFT STACK_INIT = STACK_SIZE - STACK_FRAME_OVERHEAD - __PT_SIZE -_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ - _TIF_MCCK_PENDING | _TIF_PER_TRAP | _TIF_ASCE) -_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \ - _TIF_MCCK_PENDING | _TIF_ASCE) -_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ - _TIF_SYSCALL_TRACEPOINT) -_TIF_TRANSFER = (_TIF_MCCK_PENDING | _TIF_TLB_WAIT) +_TIF_WORK = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED) +_TIF_TRACE = (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SECCOMP | \ + _TIF_SYSCALL_TRACEPOINT) +_CIF_WORK = (_CIF_MCCK_PENDING | _CIF_ASCE) +_PIF_WORK = (_PIF_PER_TRAP) #define BASED(name) name-system_call(%r13) @@ -190,13 +188,7 @@ ENTRY(__switch_to) lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next lg %r15,__THREAD_ksp(%r3) # load kernel stack of next - llill %r6,_TIF_TRANSFER # transfer TIF bits - ng %r6,__TI_flags(%r4) # isolate TIF bits - jz 0f - og %r6,__TI_flags(%r5) # set TIF bits of next - stg %r6,__TI_flags(%r5) - ni __TI_flags+7(%r4),255-_TIF_TRANSFER # clear TIF bits of prev -0: lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task + lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task br %r14 __critical_start: @@ -211,6 +203,7 @@ sysc_stmg: stmg %r8,%r15,__LC_SAVE_AREA_SYNC lg %r10,__LC_LAST_BREAK lg %r12,__LC_THREAD_INFO + lghi %r14,_PIF_SYSCALL sysc_per: lg %r15,__LC_KERNEL_STACK la %r11,STACK_FRAME_OVERHEAD(%r15) # pointer to pt_regs @@ -221,8 +214,8 @@ sysc_vtime: mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC mvc __PT_PSW(16,%r11),__LC_SVC_OLD_PSW mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC + stg %r14,__PT_FLAGS(%r11) sysc_do_svc: - oi __TI_flags+7(%r12),_TIF_SYSCALL lg %r10,__TI_sysc_table(%r12) # address of system call table llgh %r8,__PT_INT_CODE+2(%r11) slag %r8,%r8,2 # shift and test for svc 0 @@ -238,7 +231,7 @@ sysc_nr_ok: stg %r2,__PT_ORIG_GPR2(%r11) stg %r7,STACK_FRAME_OVERHEAD(%r15) lgf %r9,0(%r8,%r10) # get system call add. - tm __TI_flags+6(%r12),_TIF_TRACE >> 8 + tm __TI_flags+7(%r12),_TIF_TRACE jnz sysc_tracesys basr %r14,%r9 # call sys_xxxx stg %r2,__PT_R2(%r11) # store return value @@ -248,9 +241,12 @@ sysc_return: sysc_tif: tm __PT_PSW+1(%r11),0x01 # returning to user ? jno sysc_restore - tm __TI_flags+7(%r12),_TIF_WORK_SVC + tm __PT_FLAGS+7(%r11),_PIF_WORK + jnz sysc_work + tm __TI_flags+7(%r12),_TIF_WORK jnz sysc_work # check for work - ni __TI_flags+7(%r12),255-_TIF_SYSCALL + tm __LC_CPU_FLAGS+7,_CIF_WORK + jnz sysc_work sysc_restore: lg %r14,__LC_VDSO_PER_CPU lmg %r0,%r10,__PT_R0(%r11) @@ -265,17 +261,17 @@ sysc_done: # One of the work bits is on. Find out which one. # sysc_work: - tm __TI_flags+7(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING jo sysc_mcck_pending tm __TI_flags+7(%r12),_TIF_NEED_RESCHED jo sysc_reschedule - tm __TI_flags+7(%r12),_TIF_PER_TRAP + tm __PT_FLAGS+7(%r11),_PIF_PER_TRAP jo sysc_singlestep tm __TI_flags+7(%r12),_TIF_SIGPENDING jo sysc_sigpending tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME jo sysc_notify_resume - tm __TI_flags+7(%r12),_TIF_ASCE + tm __LC_CPU_FLAGS+7,_CIF_ASCE jo sysc_uaccess j sysc_return # beware of critical section cleanup @@ -287,17 +283,17 @@ sysc_reschedule: jg schedule # -# _TIF_MCCK_PENDING is set, call handler +# _CIF_MCCK_PENDING is set, call handler # sysc_mcck_pending: larl %r14,sysc_return jg s390_handle_mcck # TIF bit will be cleared by handler # -# _TIF_ASCE is set, load user space asce +# _CIF_ASCE is set, load user space asce # sysc_uaccess: - ni __TI_flags+7(%r12),255-_TIF_ASCE + ni __LC_CPU_FLAGS+7,255-_CIF_ASCE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce j sysc_return @@ -307,7 +303,7 @@ sysc_uaccess: sysc_sigpending: lgr %r2,%r11 # pass pointer to pt_regs brasl %r14,do_signal - tm __TI_flags+7(%r12),_TIF_SYSCALL + tm __PT_FLAGS+7(%r11),_PIF_SYSCALL jno sysc_return lmg %r2,%r7,__PT_R2(%r11) # load svc arguments lg %r10,__TI_sysc_table(%r12) # address of system call table @@ -327,10 +323,10 @@ sysc_notify_resume: jg do_notify_resume # -# _TIF_PER_TRAP is set, call do_per_trap +# _PIF_PER_TRAP is set, call do_per_trap # sysc_singlestep: - ni __TI_flags+7(%r12),255-_TIF_PER_TRAP + ni __PT_FLAGS+7(%r11),255-_PIF_PER_TRAP lgr %r2,%r11 # pass pointer to pt_regs larl %r14,sysc_return jg do_per_trap @@ -357,7 +353,7 @@ sysc_tracego: basr %r14,%r9 # call sys_xxx stg %r2,__PT_R2(%r11) # store return value sysc_tracenogo: - tm __TI_flags+6(%r12),_TIF_TRACE >> 8 + tm __TI_flags+7(%r12),_TIF_TRACE jz sysc_return lgr %r2,%r11 # pass pointer to pt_regs larl %r14,sysc_return @@ -416,15 +412,16 @@ ENTRY(pgm_check_handler) stmg %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(4,%r11),__LC_PGM_ILC mvc __PT_INT_PARM_LONG(8,%r11),__LC_TRANS_EXC_CODE + xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) stg %r10,__PT_ARGS(%r11) tm __LC_PGM_ILC+3,0x80 # check for per exception jz 0f tmhh %r8,0x0001 # kernel per event ? jz pgm_kprobe - oi __TI_flags+7(%r12),_TIF_PER_TRAP + oi __PT_FLAGS+7(%r11),_PIF_PER_TRAP mvc __THREAD_per_address(8,%r14),__LC_PER_ADDRESS - mvc __THREAD_per_cause(2,%r14),__LC_PER_CAUSE - mvc __THREAD_per_paid(1,%r14),__LC_PER_PAID + mvc __THREAD_per_cause(2,%r14),__LC_PER_CODE + mvc __THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID 0: REENABLE_IRQS xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) larl %r1,pgm_check_table @@ -451,10 +448,10 @@ pgm_kprobe: # single stepped system call # pgm_svcper: - oi __TI_flags+7(%r12),_TIF_PER_TRAP mvc __LC_RETURN_PSW(8),__LC_SVC_NEW_PSW larl %r14,sysc_per stg %r14,__LC_RETURN_PSW+8 + lghi %r14,_PIF_SYSCALL | _PIF_PER_TRAP lpswe __LC_RETURN_PSW # branch to sysc_per and enable irqs /* @@ -479,6 +476,7 @@ io_skip: mvc __PT_R8(64,%r11),__LC_SAVE_AREA_ASYNC stmg %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID + xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) io_loop: @@ -499,8 +497,10 @@ io_return: LOCKDEP_SYS_EXIT TRACE_IRQS_ON io_tif: - tm __TI_flags+7(%r12),_TIF_WORK_INT + tm __TI_flags+7(%r12),_TIF_WORK jnz io_work # there is work to do (signals etc.) + tm __LC_CPU_FLAGS+7,_CIF_WORK + jnz io_work io_restore: lg %r14,__LC_VDSO_PER_CPU lmg %r0,%r10,__PT_R0(%r11) @@ -513,7 +513,7 @@ io_done: # # There is work todo, find out in which context we have been interrupted: -# 1) if we return to user space we can do all _TIF_WORK_INT work +# 1) if we return to user space we can do all _TIF_WORK work # 2) if we return to kernel code and kvm is enabled check if we need to # modify the psw to leave SIE # 3) if we return to kernel code and preemptive scheduling is enabled check @@ -557,11 +557,9 @@ io_work_user: # # One of the work bits is on. Find out which one. -# Checked are: _TIF_SIGPENDING, _TIF_NOTIFY_RESUME, _TIF_NEED_RESCHED -# and _TIF_MCCK_PENDING # io_work_tif: - tm __TI_flags+7(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING jo io_mcck_pending tm __TI_flags+7(%r12),_TIF_NEED_RESCHED jo io_reschedule @@ -569,12 +567,12 @@ io_work_tif: jo io_sigpending tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME jo io_notify_resume - tm __TI_flags+7(%r12),_TIF_ASCE + tm __LC_CPU_FLAGS+7,_CIF_ASCE jo io_uaccess j io_return # beware of critical section cleanup # -# _TIF_MCCK_PENDING is set, call handler +# _CIF_MCCK_PENDING is set, call handler # io_mcck_pending: # TRACE_IRQS_ON already done at io_return @@ -583,10 +581,10 @@ io_mcck_pending: j io_return # -# _TIF_ASCE is set, load user space asce +# _CIF_ASCE is set, load user space asce # io_uaccess: - ni __TI_flags+7(%r12),255-_TIF_ASCE + ni __LC_CPU_FLAGS+7,255-_CIF_ASCE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce j io_return @@ -650,6 +648,7 @@ ext_skip: mvc __PT_INT_CODE(4,%r11),__LC_EXT_CPU_ADDR mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS mvc __PT_INT_PARM_LONG(8,%r11),0(%r1) + xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) lgr %r2,%r11 # pass pointer to pt_regs @@ -716,6 +715,7 @@ mcck_skip: stmg %r0,%r7,__PT_R0(%r11) mvc __PT_R8(64,%r11),0(%r14) stmg %r8,%r9,__PT_PSW(%r11) + xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) lgr %r2,%r11 # pass pointer to pt_regs brasl %r14,s390_do_machine_check @@ -727,7 +727,7 @@ mcck_skip: la %r11,STACK_FRAME_OVERHEAD(%r1) lgr %r15,%r1 ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off - tm __TI_flags+7(%r12),_TIF_MCCK_PENDING + tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING jno mcck_return TRACE_IRQS_OFF brasl %r14,s390_handle_mcck @@ -884,6 +884,8 @@ cleanup_system_call: stmg %r0,%r7,__PT_R0(%r9) mvc __PT_PSW(16,%r9),__LC_SVC_OLD_PSW mvc __PT_INT_CODE(4,%r9),__LC_SVC_ILC + xc __PT_FLAGS(8,%r9),__PT_FLAGS(%r9) + mvi __PT_FLAGS+7(%r9),_PIF_SYSCALL # setup saved register r15 stg %r15,56(%r11) # r15 stack pointer # set new psw address and exit diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index 429afcc480cb..7ba7d6784510 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -437,13 +437,13 @@ ENTRY(startup_kdump) #if defined(CONFIG_64BIT) #if defined(CONFIG_MARCH_ZEC12) - .long 3, 0xc100efe3, 0xf46ce800, 0x00400000 + .long 3, 0xc100efea, 0xf46ce800, 0x00400000 #elif defined(CONFIG_MARCH_Z196) - .long 2, 0xc100efe3, 0xf46c0000 + .long 2, 0xc100efea, 0xf46c0000 #elif defined(CONFIG_MARCH_Z10) - .long 2, 0xc100efe3, 0xf0680000 + .long 2, 0xc100efea, 0xf0680000 #elif defined(CONFIG_MARCH_Z9_109) - .long 1, 0xc100efc3 + .long 1, 0xc100efc2 #elif defined(CONFIG_MARCH_Z990) .long 1, 0xc0002000 #elif defined(CONFIG_MARCH_Z900) diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index 9a99856df1c9..6dbe80983a24 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -59,7 +59,6 @@ ENTRY(startup_continue) .long 0 # cr13: home space segment table .long 0xc0000000 # cr14: machine check handling off .long 0 # cr15: linkage stack operations -.Lmchunk:.long memory_chunk .Lbss_bgn: .long __bss_start .Lbss_end: .long _end .Lparmaddr: .long PARMAREA diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index c7463aa0014b..99b0b09646ca 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -92,7 +92,6 @@ static const struct irq_class irqclass_sub_desc[NR_ARCH_IRQS] = { void __init init_IRQ(void) { - irq_reserve_irqs(0, THIN_INTERRUPT); init_cio_interrupts(); init_airq_interrupts(); init_ext_interrupts(); @@ -151,9 +150,9 @@ out: return 0; } -int arch_show_interrupts(struct seq_file *p, int prec) +unsigned int arch_dynirq_lower_bound(unsigned int from) { - return 0; + return from < THIN_INTERRUPT ? THIN_INTERRUPT : from; } /* diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index c4c033819879..210e1285f75a 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -55,7 +55,7 @@ void s390_handle_mcck(void) local_mcck_disable(); mcck = __get_cpu_var(cpu_mcck); memset(&__get_cpu_var(cpu_mcck), 0, sizeof(struct mcck_struct)); - clear_thread_flag(TIF_MCCK_PENDING); + clear_cpu_flag(CIF_MCCK_PENDING); local_mcck_enable(); local_irq_restore(flags); @@ -313,7 +313,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs) */ mcck->kill_task = 1; mcck->mcck_code = *(unsigned long long *) mci; - set_thread_flag(TIF_MCCK_PENDING); + set_cpu_flag(CIF_MCCK_PENDING); } else { /* * Couldn't restore all register contents while in @@ -352,12 +352,12 @@ void notrace s390_do_machine_check(struct pt_regs *regs) if (mci->cp) { /* Channel report word pending */ mcck->channel_report = 1; - set_thread_flag(TIF_MCCK_PENDING); + set_cpu_flag(CIF_MCCK_PENDING); } if (mci->w) { /* Warning pending */ mcck->warning = 1; - set_thread_flag(TIF_MCCK_PENDING); + set_cpu_flag(CIF_MCCK_PENDING); } nmi_exit(); } diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index dd145321d215..93b9ca42e5c0 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -64,7 +64,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk) void arch_cpu_idle(void) { local_mcck_disable(); - if (test_thread_flag(TIF_MCCK_PENDING)) { + if (test_cpu_flag(CIF_MCCK_PENDING)) { local_mcck_enable(); local_irq_enable(); return; @@ -76,7 +76,7 @@ void arch_cpu_idle(void) void arch_cpu_idle_exit(void) { - if (test_thread_flag(TIF_MCCK_PENDING)) + if (test_cpu_flag(CIF_MCCK_PENDING)) s390_handle_mcck(); } @@ -123,7 +123,6 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, memset(&p->thread.per_user, 0, sizeof(p->thread.per_user)); memset(&p->thread.per_event, 0, sizeof(p->thread.per_event)); clear_tsk_thread_flag(p, TIF_SINGLE_STEP); - clear_tsk_thread_flag(p, TIF_PER_TRAP); /* Initialize per thread user and system timer values */ ti = task_thread_info(p); ti->user_timer = 0; @@ -152,6 +151,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp, } frame->childregs = *current_pt_regs(); frame->childregs.gprs[2] = 0; /* child returns 0 on fork. */ + frame->childregs.flags = 0; if (new_stackp) frame->childregs.gprs[15] = new_stackp; diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 1c82619eb4f7..2d716734b5b1 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -136,7 +136,7 @@ void ptrace_disable(struct task_struct *task) memset(&task->thread.per_user, 0, sizeof(task->thread.per_user)); memset(&task->thread.per_event, 0, sizeof(task->thread.per_event)); clear_tsk_thread_flag(task, TIF_SINGLE_STEP); - clear_tsk_thread_flag(task, TIF_PER_TRAP); + clear_pt_regs_flag(task_pt_regs(task), PIF_PER_TRAP); task->thread.per_flags = 0; } @@ -813,7 +813,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) * debugger stored an invalid system call number. Skip * the system call and the system call restart handling. */ - clear_thread_flag(TIF_SYSCALL); + clear_pt_regs_flag(regs, PIF_SYSCALL); ret = -1; } diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 88d1ca81e2dd..1e2264b46e4c 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -78,10 +78,9 @@ EXPORT_SYMBOL(console_irq); unsigned long elf_hwcap = 0; char elf_platform[ELF_PLATFORM_SIZE]; -struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS]; - int __initdata memory_end_set; unsigned long __initdata memory_end; +unsigned long __initdata max_physmem_end; unsigned long VMALLOC_START; EXPORT_SYMBOL(VMALLOC_START); @@ -212,7 +211,7 @@ static void __init conmode_default(void) } } -#ifdef CONFIG_ZFCPDUMP +#ifdef CONFIG_CRASH_DUMP static void __init setup_zfcpdump(void) { if (ipl_info.type != IPL_TYPE_FCP_DUMP) @@ -224,7 +223,7 @@ static void __init setup_zfcpdump(void) } #else static inline void setup_zfcpdump(void) {} -#endif /* CONFIG_ZFCPDUMP */ +#endif /* CONFIG_CRASH_DUMP */ /* * Reboot, halt and power_off stubs. They just call _machine_restart, @@ -273,6 +272,7 @@ EXPORT_SYMBOL_GPL(pm_power_off); static int __init early_parse_mem(char *p) { memory_end = memparse(p, &p); + memory_end &= PAGE_MASK; memory_end_set = 1; return 0; } @@ -373,6 +373,10 @@ static void __init setup_lowcore(void) mem_assign_absolute(S390_lowcore.restart_source, lc->restart_source); mem_assign_absolute(S390_lowcore.restart_psw, lc->restart_psw); +#ifdef CONFIG_SMP + lc->spinlock_lockval = arch_spin_lockval(0); +#endif + set_prefix((u32)(unsigned long) lc); lowcore_ptr[0] = lc; } @@ -401,7 +405,8 @@ static struct resource __initdata *standard_resources[] = { static void __init setup_resources(void) { struct resource *res, *std_res, *sub_res; - int i, j; + struct memblock_region *reg; + int j; code_resource.start = (unsigned long) &_text; code_resource.end = (unsigned long) &_etext - 1; @@ -410,24 +415,13 @@ static void __init setup_resources(void) bss_resource.start = (unsigned long) &__bss_start; bss_resource.end = (unsigned long) &__bss_stop - 1; - for (i = 0; i < MEMORY_CHUNKS; i++) { - if (!memory_chunk[i].size) - continue; + for_each_memblock(memory, reg) { res = alloc_bootmem_low(sizeof(*res)); res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; - switch (memory_chunk[i].type) { - case CHUNK_READ_WRITE: - res->name = "System RAM"; - break; - case CHUNK_READ_ONLY: - res->name = "System ROM"; - res->flags |= IORESOURCE_READONLY; - break; - default: - res->name = "reserved"; - } - res->start = memory_chunk[i].addr; - res->end = res->start + memory_chunk[i].size - 1; + + res->name = "System RAM"; + res->start = reg->base; + res->end = reg->base + reg->size - 1; request_resource(&iomem_resource, res); for (j = 0; j < ARRAY_SIZE(standard_resources); j++) { @@ -451,48 +445,11 @@ static void __init setup_resources(void) static void __init setup_memory_end(void) { unsigned long vmax, vmalloc_size, tmp; - unsigned long real_memory_size = 0; - int i; - - -#ifdef CONFIG_ZFCPDUMP - if (ipl_info.type == IPL_TYPE_FCP_DUMP && - !OLDMEM_BASE && sclp_get_hsa_size()) { - memory_end = sclp_get_hsa_size(); - memory_end_set = 1; - } -#endif - memory_end &= PAGE_MASK; - - /* - * Make sure all chunks are MAX_ORDER aligned so we don't need the - * extra checks that HOLES_IN_ZONE would require. - */ - for (i = 0; i < MEMORY_CHUNKS; i++) { - unsigned long start, end; - struct mem_chunk *chunk; - unsigned long align; - - chunk = &memory_chunk[i]; - if (!chunk->size) - continue; - align = 1UL << (MAX_ORDER + PAGE_SHIFT - 1); - start = (chunk->addr + align - 1) & ~(align - 1); - end = (chunk->addr + chunk->size) & ~(align - 1); - if (start >= end) - memset(chunk, 0, sizeof(*chunk)); - else { - chunk->addr = start; - chunk->size = end - start; - } - real_memory_size = max(real_memory_size, - chunk->addr + chunk->size); - } /* Choose kernel address space layout: 2, 3, or 4 levels. */ #ifdef CONFIG_64BIT vmalloc_size = VMALLOC_END ?: (128UL << 30) - MODULES_LEN; - tmp = (memory_end ?: real_memory_size) / PAGE_SIZE; + tmp = (memory_end ?: max_physmem_end) / PAGE_SIZE; tmp = tmp * (sizeof(struct page) + PAGE_SIZE) + vmalloc_size; if (tmp <= (1UL << 42)) vmax = 1UL << 42; /* 3-level kernel page table */ @@ -520,21 +477,11 @@ static void __init setup_memory_end(void) vmemmap = (struct page *) tmp; /* Take care that memory_end is set and <= vmemmap */ - memory_end = min(memory_end ?: real_memory_size, tmp); - - /* Fixup memory chunk array to fit into 0..memory_end */ - for (i = 0; i < MEMORY_CHUNKS; i++) { - struct mem_chunk *chunk = &memory_chunk[i]; + memory_end = min(memory_end ?: max_physmem_end, tmp); + max_pfn = max_low_pfn = PFN_DOWN(memory_end); + memblock_remove(memory_end, ULONG_MAX); - if (!chunk->size) - continue; - if (chunk->addr >= memory_end) { - memset(chunk, 0, sizeof(*chunk)); - continue; - } - if (chunk->addr + chunk->size > memory_end) - chunk->size = memory_end - chunk->addr; - } + pr_notice("Max memory size: %luMB\n", memory_end >> 20); } static void __init setup_vmcoreinfo(void) @@ -545,89 +492,6 @@ static void __init setup_vmcoreinfo(void) #ifdef CONFIG_CRASH_DUMP /* - * Find suitable location for crashkernel memory - */ -static unsigned long __init find_crash_base(unsigned long crash_size, - char **msg) -{ - unsigned long crash_base; - struct mem_chunk *chunk; - int i; - - if (memory_chunk[0].size < crash_size) { - *msg = "first memory chunk must be at least crashkernel size"; - return 0; - } - if (OLDMEM_BASE && crash_size == OLDMEM_SIZE) - return OLDMEM_BASE; - - for (i = MEMORY_CHUNKS - 1; i >= 0; i--) { - chunk = &memory_chunk[i]; - if (chunk->size == 0) - continue; - if (chunk->type != CHUNK_READ_WRITE) - continue; - if (chunk->size < crash_size) - continue; - crash_base = (chunk->addr + chunk->size) - crash_size; - if (crash_base < crash_size) - continue; - if (crash_base < sclp_get_hsa_size()) - continue; - if (crash_base < (unsigned long) INITRD_START + INITRD_SIZE) - continue; - return crash_base; - } - *msg = "no suitable area found"; - return 0; -} - -/* - * Check if crash_base and crash_size is valid - */ -static int __init verify_crash_base(unsigned long crash_base, - unsigned long crash_size, - char **msg) -{ - struct mem_chunk *chunk; - int i; - - /* - * Because we do the swap to zero, we must have at least 'crash_size' - * bytes free space before crash_base - */ - if (crash_size > crash_base) { - *msg = "crashkernel offset must be greater than size"; - return -EINVAL; - } - - /* First memory chunk must be at least crash_size */ - if (memory_chunk[0].size < crash_size) { - *msg = "first memory chunk must be at least crashkernel size"; - return -EINVAL; - } - /* Check if we fit into the respective memory chunk */ - for (i = 0; i < MEMORY_CHUNKS; i++) { - chunk = &memory_chunk[i]; - if (chunk->size == 0) - continue; - if (crash_base < chunk->addr) - continue; - if (crash_base >= chunk->addr + chunk->size) - continue; - /* we have found the memory chunk */ - if (crash_base + crash_size > chunk->addr + chunk->size) { - *msg = "selected memory chunk is too small for " - "crashkernel memory"; - return -EINVAL; - } - return 0; - } - *msg = "invalid memory range specified"; - return -EINVAL; -} - -/* * When kdump is enabled, we have to ensure that no memory from * the area [0 - crashkernel memory size] and * [crashk_res.start - crashk_res.end] is set offline. @@ -653,23 +517,44 @@ static struct notifier_block kdump_mem_nb = { #endif /* + * Make sure that the area behind memory_end is protected + */ +static void reserve_memory_end(void) +{ +#ifdef CONFIG_CRASH_DUMP + if (ipl_info.type == IPL_TYPE_FCP_DUMP && + !OLDMEM_BASE && sclp_get_hsa_size()) { + memory_end = sclp_get_hsa_size(); + memory_end &= PAGE_MASK; + memory_end_set = 1; + } +#endif + if (!memory_end_set) + return; + memblock_reserve(memory_end, ULONG_MAX); +} + +/* * Make sure that oldmem, where the dump is stored, is protected */ static void reserve_oldmem(void) { #ifdef CONFIG_CRASH_DUMP - unsigned long real_size = 0; - int i; - - if (!OLDMEM_BASE) - return; - for (i = 0; i < MEMORY_CHUNKS; i++) { - struct mem_chunk *chunk = &memory_chunk[i]; + if (OLDMEM_BASE) + /* Forget all memory above the running kdump system */ + memblock_reserve(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX); +#endif +} - real_size = max(real_size, chunk->addr + chunk->size); - } - create_mem_hole(memory_chunk, OLDMEM_BASE, OLDMEM_SIZE); - create_mem_hole(memory_chunk, OLDMEM_SIZE, real_size - OLDMEM_SIZE); +/* + * Make sure that oldmem, where the dump is stored, is protected + */ +static void remove_oldmem(void) +{ +#ifdef CONFIG_CRASH_DUMP + if (OLDMEM_BASE) + /* Forget all memory above the running kdump system */ + memblock_remove(OLDMEM_SIZE, (phys_addr_t)ULONG_MAX); #endif } @@ -680,167 +565,132 @@ static void __init reserve_crashkernel(void) { #ifdef CONFIG_CRASH_DUMP unsigned long long crash_base, crash_size; - char *msg = NULL; + phys_addr_t low, high; int rc; rc = parse_crashkernel(boot_command_line, memory_end, &crash_size, &crash_base); - if (rc || crash_size == 0) - return; + crash_base = ALIGN(crash_base, KEXEC_CRASH_MEM_ALIGN); crash_size = ALIGN(crash_size, KEXEC_CRASH_MEM_ALIGN); - if (register_memory_notifier(&kdump_mem_nb)) + if (rc || crash_size == 0) return; - if (!crash_base) - crash_base = find_crash_base(crash_size, &msg); - if (!crash_base) { - pr_info("crashkernel reservation failed: %s\n", msg); - unregister_memory_notifier(&kdump_mem_nb); + + if (memblock.memory.regions[0].size < crash_size) { + pr_info("crashkernel reservation failed: %s\n", + "first memory chunk must be at least crashkernel size"); return; } - if (verify_crash_base(crash_base, crash_size, &msg)) { - pr_info("crashkernel reservation failed: %s\n", msg); - unregister_memory_notifier(&kdump_mem_nb); + + low = crash_base ?: OLDMEM_BASE; + high = low + crash_size; + if (low >= OLDMEM_BASE && high <= OLDMEM_BASE + OLDMEM_SIZE) { + /* The crashkernel fits into OLDMEM, reuse OLDMEM */ + crash_base = low; + } else { + /* Find suitable area in free memory */ + low = max_t(unsigned long, crash_size, sclp_get_hsa_size()); + high = crash_base ? crash_base + crash_size : ULONG_MAX; + + if (crash_base && crash_base < low) { + pr_info("crashkernel reservation failed: %s\n", + "crash_base too low"); + return; + } + low = crash_base ?: low; + crash_base = memblock_find_in_range(low, high, crash_size, + KEXEC_CRASH_MEM_ALIGN); + } + + if (!crash_base) { + pr_info("crashkernel reservation failed: %s\n", + "no suitable area found"); return; } + + if (register_memory_notifier(&kdump_mem_nb)) + return; + if (!OLDMEM_BASE && MACHINE_IS_VM) diag10_range(PFN_DOWN(crash_base), PFN_DOWN(crash_size)); crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; insert_resource(&iomem_resource, &crashk_res); - create_mem_hole(memory_chunk, crash_base, crash_size); + memblock_remove(crash_base, crash_size); pr_info("Reserving %lluMB of memory at %lluMB " "for crashkernel (System RAM: %luMB)\n", - crash_size >> 20, crash_base >> 20, memory_end >> 20); + crash_size >> 20, crash_base >> 20, + (unsigned long)memblock.memory.total_size >> 20); os_info_crashkernel_add(crash_base, crash_size); #endif } -static void __init setup_memory(void) +/* + * Reserve the initrd from being used by memblock + */ +static void __init reserve_initrd(void) { - unsigned long bootmap_size; - unsigned long start_pfn, end_pfn; - int i; +#ifdef CONFIG_BLK_DEV_INITRD + initrd_start = INITRD_START; + initrd_end = initrd_start + INITRD_SIZE; + memblock_reserve(INITRD_START, INITRD_SIZE); +#endif +} - /* - * partially used pages are not usable - thus - * we are rounding upwards: - */ +/* + * Check for initrd being in usable memory + */ +static void __init check_initrd(void) +{ +#ifdef CONFIG_BLK_DEV_INITRD + if (INITRD_START && INITRD_SIZE && + !memblock_is_region_memory(INITRD_START, INITRD_SIZE)) { + pr_err("initrd does not fit memory.\n"); + memblock_free(INITRD_START, INITRD_SIZE); + initrd_start = initrd_end = 0; + } +#endif +} + +/* + * Reserve all kernel text + */ +static void __init reserve_kernel(void) +{ + unsigned long start_pfn; start_pfn = PFN_UP(__pa(&_end)); - end_pfn = max_pfn = PFN_DOWN(memory_end); -#ifdef CONFIG_BLK_DEV_INITRD /* - * Move the initrd in case the bitmap of the bootmem allocater - * would overwrite it. + * Reserve memory used for lowcore/command line/kernel image. */ + memblock_reserve(0, (unsigned long)_ehead); + memblock_reserve((unsigned long)_stext, PFN_PHYS(start_pfn) + - (unsigned long)_stext); +} - if (INITRD_START && INITRD_SIZE) { - unsigned long bmap_size; - unsigned long start; - - bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1); - bmap_size = PFN_PHYS(bmap_size); - - if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) { - start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE; - +static void __init reserve_elfcorehdr(void) +{ #ifdef CONFIG_CRASH_DUMP - if (OLDMEM_BASE) { - /* Move initrd behind kdump oldmem */ - if (start + INITRD_SIZE > OLDMEM_BASE && - start < OLDMEM_BASE + OLDMEM_SIZE) - start = OLDMEM_BASE + OLDMEM_SIZE; - } -#endif - if (start + INITRD_SIZE > memory_end) { - pr_err("initrd extends beyond end of " - "memory (0x%08lx > 0x%08lx) " - "disabling initrd\n", - start + INITRD_SIZE, memory_end); - INITRD_START = INITRD_SIZE = 0; - } else { - pr_info("Moving initrd (0x%08lx -> " - "0x%08lx, size: %ld)\n", - INITRD_START, start, INITRD_SIZE); - memmove((void *) start, (void *) INITRD_START, - INITRD_SIZE); - INITRD_START = start; - } - } - } + if (is_kdump_kernel()) + memblock_reserve(elfcorehdr_addr - OLDMEM_BASE, + PAGE_ALIGN(elfcorehdr_size)); #endif +} - /* - * Initialize the boot-time allocator - */ - bootmap_size = init_bootmem(start_pfn, end_pfn); +static void __init setup_memory(void) +{ + struct memblock_region *reg; /* - * Register RAM areas with the bootmem allocator. + * Init storage key for present memory */ - - for (i = 0; i < MEMORY_CHUNKS; i++) { - unsigned long start_chunk, end_chunk, pfn; - - if (!memory_chunk[i].size) - continue; - start_chunk = PFN_DOWN(memory_chunk[i].addr); - end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size); - end_chunk = min(end_chunk, end_pfn); - if (start_chunk >= end_chunk) - continue; - memblock_add_node(PFN_PHYS(start_chunk), - PFN_PHYS(end_chunk - start_chunk), 0); - pfn = max(start_chunk, start_pfn); - storage_key_init_range(PFN_PHYS(pfn), PFN_PHYS(end_chunk)); + for_each_memblock(memory, reg) { + storage_key_init_range(reg->base, reg->base + reg->size); } - psw_set_key(PAGE_DEFAULT_KEY); - free_bootmem_with_active_regions(0, max_pfn); - - /* - * Reserve memory used for lowcore/command line/kernel image. - */ - reserve_bootmem(0, (unsigned long)_ehead, BOOTMEM_DEFAULT); - reserve_bootmem((unsigned long)_stext, - PFN_PHYS(start_pfn) - (unsigned long)_stext, - BOOTMEM_DEFAULT); - /* - * Reserve the bootmem bitmap itself as well. We do this in two - * steps (first step was init_bootmem()) because this catches - * the (very unlikely) case of us accidentally initializing the - * bootmem allocator with an invalid RAM area. - */ - reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size, - BOOTMEM_DEFAULT); - -#ifdef CONFIG_CRASH_DUMP - if (crashk_res.start) - reserve_bootmem(crashk_res.start, - crashk_res.end - crashk_res.start + 1, - BOOTMEM_DEFAULT); - if (is_kdump_kernel()) - reserve_bootmem(elfcorehdr_addr - OLDMEM_BASE, - PAGE_ALIGN(elfcorehdr_size), BOOTMEM_DEFAULT); -#endif -#ifdef CONFIG_BLK_DEV_INITRD - if (INITRD_START && INITRD_SIZE) { - if (INITRD_START + INITRD_SIZE <= memory_end) { - reserve_bootmem(INITRD_START, INITRD_SIZE, - BOOTMEM_DEFAULT); - initrd_start = INITRD_START; - initrd_end = initrd_start + INITRD_SIZE; - } else { - pr_err("initrd extends beyond end of " - "memory (0x%08lx > 0x%08lx) " - "disabling initrd\n", - initrd_start + INITRD_SIZE, memory_end); - initrd_start = initrd_end = 0; - } - } -#endif + /* Only cosmetics */ + memblock_enforce_memory_limit(memblock_end_of_DRAM()); } /* @@ -989,23 +839,46 @@ void __init setup_arch(char **cmdline_p) ROOT_DEV = Root_RAM0; + /* Is init_mm really needed? */ init_mm.start_code = PAGE_OFFSET; init_mm.end_code = (unsigned long) &_etext; init_mm.end_data = (unsigned long) &_edata; init_mm.brk = (unsigned long) &_end; parse_early_param(); - detect_memory_layout(memory_chunk, memory_end); os_info_init(); setup_ipl(); + + /* Do some memory reservations *before* memory is added to memblock */ + reserve_memory_end(); reserve_oldmem(); + reserve_kernel(); + reserve_initrd(); + reserve_elfcorehdr(); + memblock_allow_resize(); + + /* Get information about *all* installed memory */ + detect_memory_memblock(); + + remove_oldmem(); + + /* + * Make sure all chunks are MAX_ORDER aligned so we don't need the + * extra checks that HOLES_IN_ZONE would require. + * + * Is this still required? + */ + memblock_trim_memory(1UL << (MAX_ORDER - 1 + PAGE_SHIFT)); + setup_memory_end(); - reserve_crashkernel(); setup_memory(); + + check_initrd(); + reserve_crashkernel(); + setup_resources(); setup_vmcoreinfo(); setup_lowcore(); - smp_fill_possible_mask(); cpu_init(); s390_init_cpu_topology(); diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index d8fd508ccd1e..42b49f9e19bf 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -113,7 +113,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs) sizeof(current->thread.fp_regs)); restore_fp_regs(current->thread.fp_regs.fprs); - clear_thread_flag(TIF_SYSCALL); /* No longer in a system call */ + clear_pt_regs_flag(regs, PIF_SYSCALL); /* No longer in a system call */ return 0; } @@ -356,7 +356,7 @@ void do_signal(struct pt_regs *regs) * call information. */ current_thread_info()->system_call = - test_thread_flag(TIF_SYSCALL) ? regs->int_code : 0; + test_pt_regs_flag(regs, PIF_SYSCALL) ? regs->int_code : 0; signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { @@ -384,7 +384,7 @@ void do_signal(struct pt_regs *regs) } } /* No longer in a system call */ - clear_thread_flag(TIF_SYSCALL); + clear_pt_regs_flag(regs, PIF_SYSCALL); if (is_compat_task()) handle_signal32(signr, &ka, &info, oldset, regs); @@ -394,7 +394,7 @@ void do_signal(struct pt_regs *regs) } /* No handlers present - check for system call restart */ - clear_thread_flag(TIF_SYSCALL); + clear_pt_regs_flag(regs, PIF_SYSCALL); if (current_thread_info()->system_call) { regs->int_code = current_thread_info()->system_call; switch (regs->gprs[2]) { @@ -407,9 +407,9 @@ void do_signal(struct pt_regs *regs) case -ERESTARTNOINTR: /* Restart system call with magic TIF bit. */ regs->gprs[2] = regs->orig_gpr2; - set_thread_flag(TIF_SYSCALL); + set_pt_regs_flag(regs, PIF_SYSCALL); if (test_thread_flag(TIF_SINGLE_STEP)) - set_thread_flag(TIF_PER_TRAP); + clear_pt_regs_flag(regs, PIF_PER_TRAP); break; } } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 86e65ec3422b..243c7e512600 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -170,6 +170,7 @@ static int pcpu_alloc_lowcore(struct pcpu *pcpu, int cpu) lc->panic_stack = pcpu->panic_stack + PAGE_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs); lc->cpu_nr = cpu; + lc->spinlock_lockval = arch_spin_lockval(cpu); #ifndef CONFIG_64BIT if (MACHINE_HAS_IEEE) { lc->extended_save_area_addr = get_zeroed_page(GFP_KERNEL); @@ -226,6 +227,7 @@ static void pcpu_prepare_secondary(struct pcpu *pcpu, int cpu) cpumask_set_cpu(cpu, mm_cpumask(&init_mm)); atomic_inc(&init_mm.context.attach_count); lc->cpu_nr = cpu; + lc->spinlock_lockval = arch_spin_lockval(cpu); lc->percpu_offset = __per_cpu_offset[cpu]; lc->kernel_asce = S390_lowcore.kernel_asce; lc->machine_flags = S390_lowcore.machine_flags; @@ -403,15 +405,6 @@ void smp_send_stop(void) } /* - * Stop the current cpu. - */ -void smp_stop_cpu(void) -{ - pcpu_sigp_retry(pcpu_devices + smp_processor_id(), SIGP_STOP, 0); - for (;;) ; -} - -/* * This is the main routine where commands issued by other * cpus are handled. */ @@ -519,7 +512,7 @@ void smp_ctl_clear_bit(int cr, int bit) } EXPORT_SYMBOL(smp_ctl_clear_bit); -#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP) +#ifdef CONFIG_CRASH_DUMP static void __init smp_get_save_area(int cpu, u16 address) { @@ -534,14 +527,12 @@ static void __init smp_get_save_area(int cpu, u16 address) save_area = dump_save_area_create(cpu); if (!save_area) panic("could not allocate memory for save area\n"); -#ifdef CONFIG_CRASH_DUMP if (address == boot_cpu_address) { /* Copy the registers of the boot cpu. */ copy_oldmem_page(1, (void *) save_area, sizeof(*save_area), SAVE_AREA_BASE - PAGE_SIZE, 0); return; } -#endif /* Get the registers of a non-boot cpu. */ __pcpu_sigp_relax(address, SIGP_STOP_AND_STORE_STATUS, 0, NULL); memcpy_real(save_area, lc + SAVE_AREA_BASE, sizeof(*save_area)); @@ -558,11 +549,11 @@ int smp_store_status(int cpu) return 0; } -#else /* CONFIG_ZFCPDUMP || CONFIG_CRASH_DUMP */ +#else /* CONFIG_CRASH_DUMP */ static inline void smp_get_save_area(int cpu, u16 address) { } -#endif /* CONFIG_ZFCPDUMP || CONFIG_CRASH_DUMP */ +#endif /* CONFIG_CRASH_DUMP */ void smp_cpu_set_polarization(int cpu, int val) { @@ -809,6 +800,7 @@ void __init smp_cpus_done(unsigned int max_cpus) void __init smp_setup_processor_id(void) { S390_lowcore.cpu_nr = 0; + S390_lowcore.spinlock_lockval = arch_spin_lockval(0); } /* diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 386d37a228bb..0931b110c826 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -226,7 +226,7 @@ void update_vsyscall(struct timekeeper *tk) vdso_data->wtom_clock_sec = tk->xtime_sec + tk->wall_to_monotonic.tv_sec; vdso_data->wtom_clock_nsec = tk->xtime_nsec + - + (tk->wall_to_monotonic.tv_nsec << tk->shift); + + ((u64) tk->wall_to_monotonic.tv_nsec << tk->shift); nsecps = (u64) NSEC_PER_SEC << tk->shift; while (vdso_data->wtom_clock_nsec >= nsecps) { vdso_data->wtom_clock_nsec -= nsecps; diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 6298fed11ced..355a16c55702 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -333,7 +333,9 @@ static void __init alloc_masks(struct sysinfo_15_1_x *info, nr_masks *= info->mag[TOPOLOGY_NR_MAG - offset - 1 - i]; nr_masks = max(nr_masks, 1); for (i = 0; i < nr_masks; i++) { - mask->next = alloc_bootmem(sizeof(struct mask_info)); + mask->next = alloc_bootmem_align( + roundup_pow_of_two(sizeof(struct mask_info)), + roundup_pow_of_two(sizeof(struct mask_info))); mask = mask->next; } } @@ -443,6 +445,23 @@ int topology_cpu_init(struct cpu *cpu) return sysfs_create_group(&cpu->dev.kobj, &topology_cpu_attr_group); } +const struct cpumask *cpu_coregroup_mask(int cpu) +{ + return &cpu_topology[cpu].core_mask; +} + +static const struct cpumask *cpu_book_mask(int cpu) +{ + return &cpu_topology[cpu].book_mask; +} + +static struct sched_domain_topology_level s390_topology[] = { + { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, + { cpu_book_mask, SD_INIT_NAME(BOOK) }, + { cpu_cpu_mask, SD_INIT_NAME(DIE) }, + { NULL, }, +}; + static int __init topology_init(void) { if (!MACHINE_HAS_TOPOLOGY) { @@ -451,6 +470,9 @@ static int __init topology_init(void) } set_topology_timer(); out: + + set_sched_topology(s390_topology); + return device_create_file(cpu_subsys.dev_root, &dev_attr_dispatching); } device_initcall(topology_init); diff --git a/arch/s390/kvm/Makefile b/arch/s390/kvm/Makefile index d3adb37e93a4..b3b553469650 100644 --- a/arch/s390/kvm/Makefile +++ b/arch/s390/kvm/Makefile @@ -11,5 +11,7 @@ common-objs = $(KVM)/kvm_main.o $(KVM)/eventfd.o $(KVM)/async_pf.o $(KVM)/irqch ccflags-y := -Ivirt/kvm -Iarch/s390/kvm -kvm-objs := $(common-objs) kvm-s390.o intercept.o interrupt.o priv.o sigp.o diag.o +kvm-objs := $(common-objs) kvm-s390.o intercept.o interrupt.o priv.o sigp.o +kvm-objs += diag.o gaccess.o guestdbg.o + obj-$(CONFIG_KVM) += kvm.o diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index 08dfc839a6cf..0161675878a2 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -23,7 +23,7 @@ static int diag_release_pages(struct kvm_vcpu *vcpu) { unsigned long start, end; - unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long prefix = kvm_s390_get_prefix(vcpu); start = vcpu->run->s.regs.gprs[(vcpu->arch.sie_block->ipa & 0xf0) >> 4]; end = vcpu->run->s.regs.gprs[vcpu->arch.sie_block->ipa & 0xf] + 4096; @@ -64,12 +64,12 @@ static int __diag_page_ref_service(struct kvm_vcpu *vcpu) int rc; u16 rx = (vcpu->arch.sie_block->ipa & 0xf0) >> 4; u16 ry = (vcpu->arch.sie_block->ipa & 0x0f); - unsigned long hva_token = KVM_HVA_ERR_BAD; if (vcpu->run->s.regs.gprs[rx] & 7) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (copy_from_guest(vcpu, &parm, vcpu->run->s.regs.gprs[rx], sizeof(parm))) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = read_guest(vcpu, vcpu->run->s.regs.gprs[rx], &parm, sizeof(parm)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); if (parm.parm_version != 2 || parm.parm_len < 5 || parm.code != 0x258) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); @@ -89,8 +89,7 @@ static int __diag_page_ref_service(struct kvm_vcpu *vcpu) parm.token_addr & 7 || parm.zarch != 0x8000000000000000ULL) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - hva_token = gfn_to_hva(vcpu->kvm, gpa_to_gfn(parm.token_addr)); - if (kvm_is_error_hva(hva_token)) + if (kvm_is_error_gpa(vcpu->kvm, parm.token_addr)) return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); vcpu->arch.pfault_token = parm.token_addr; @@ -167,23 +166,17 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu) VCPU_EVENT(vcpu, 5, "diag ipl functions, subcode %lx", subcode); switch (subcode) { - case 0: - case 1: - page_table_reset_pgste(current->mm, 0, TASK_SIZE); - return -EOPNOTSUPP; case 3: vcpu->run->s390_reset_flags = KVM_S390_RESET_CLEAR; - page_table_reset_pgste(current->mm, 0, TASK_SIZE); break; case 4: vcpu->run->s390_reset_flags = 0; - page_table_reset_pgste(current->mm, 0, TASK_SIZE); break; default: return -EOPNOTSUPP; } - atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + kvm_s390_vcpu_stop(vcpu); vcpu->run->s390_reset_flags |= KVM_S390_RESET_SUBSYSTEM; vcpu->run->s390_reset_flags |= KVM_S390_RESET_IPL; vcpu->run->s390_reset_flags |= KVM_S390_RESET_CPU_INIT; diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c new file mode 100644 index 000000000000..4653ac6e182b --- /dev/null +++ b/arch/s390/kvm/gaccess.c @@ -0,0 +1,726 @@ +/* + * guest access functions + * + * Copyright IBM Corp. 2014 + * + */ + +#include <linux/vmalloc.h> +#include <linux/err.h> +#include <asm/pgtable.h> +#include "kvm-s390.h" +#include "gaccess.h" + +union asce { + unsigned long val; + struct { + unsigned long origin : 52; /* Region- or Segment-Table Origin */ + unsigned long : 2; + unsigned long g : 1; /* Subspace Group Control */ + unsigned long p : 1; /* Private Space Control */ + unsigned long s : 1; /* Storage-Alteration-Event Control */ + unsigned long x : 1; /* Space-Switch-Event Control */ + unsigned long r : 1; /* Real-Space Control */ + unsigned long : 1; + unsigned long dt : 2; /* Designation-Type Control */ + unsigned long tl : 2; /* Region- or Segment-Table Length */ + }; +}; + +enum { + ASCE_TYPE_SEGMENT = 0, + ASCE_TYPE_REGION3 = 1, + ASCE_TYPE_REGION2 = 2, + ASCE_TYPE_REGION1 = 3 +}; + +union region1_table_entry { + unsigned long val; + struct { + unsigned long rto: 52;/* Region-Table Origin */ + unsigned long : 2; + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long : 1; + unsigned long tf : 2; /* Region-Second-Table Offset */ + unsigned long i : 1; /* Region-Invalid Bit */ + unsigned long : 1; + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long tl : 2; /* Region-Second-Table Length */ + }; +}; + +union region2_table_entry { + unsigned long val; + struct { + unsigned long rto: 52;/* Region-Table Origin */ + unsigned long : 2; + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long : 1; + unsigned long tf : 2; /* Region-Third-Table Offset */ + unsigned long i : 1; /* Region-Invalid Bit */ + unsigned long : 1; + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long tl : 2; /* Region-Third-Table Length */ + }; +}; + +struct region3_table_entry_fc0 { + unsigned long sto: 52;/* Segment-Table Origin */ + unsigned long : 1; + unsigned long fc : 1; /* Format-Control */ + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long : 1; + unsigned long tf : 2; /* Segment-Table Offset */ + unsigned long i : 1; /* Region-Invalid Bit */ + unsigned long cr : 1; /* Common-Region Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long tl : 2; /* Segment-Table Length */ +}; + +struct region3_table_entry_fc1 { + unsigned long rfaa : 33; /* Region-Frame Absolute Address */ + unsigned long : 14; + unsigned long av : 1; /* ACCF-Validity Control */ + unsigned long acc: 4; /* Access-Control Bits */ + unsigned long f : 1; /* Fetch-Protection Bit */ + unsigned long fc : 1; /* Format-Control */ + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long co : 1; /* Change-Recording Override */ + unsigned long : 2; + unsigned long i : 1; /* Region-Invalid Bit */ + unsigned long cr : 1; /* Common-Region Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long : 2; +}; + +union region3_table_entry { + unsigned long val; + struct region3_table_entry_fc0 fc0; + struct region3_table_entry_fc1 fc1; + struct { + unsigned long : 53; + unsigned long fc : 1; /* Format-Control */ + unsigned long : 4; + unsigned long i : 1; /* Region-Invalid Bit */ + unsigned long cr : 1; /* Common-Region Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long : 2; + }; +}; + +struct segment_entry_fc0 { + unsigned long pto: 53;/* Page-Table Origin */ + unsigned long fc : 1; /* Format-Control */ + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long : 3; + unsigned long i : 1; /* Segment-Invalid Bit */ + unsigned long cs : 1; /* Common-Segment Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long : 2; +}; + +struct segment_entry_fc1 { + unsigned long sfaa : 44; /* Segment-Frame Absolute Address */ + unsigned long : 3; + unsigned long av : 1; /* ACCF-Validity Control */ + unsigned long acc: 4; /* Access-Control Bits */ + unsigned long f : 1; /* Fetch-Protection Bit */ + unsigned long fc : 1; /* Format-Control */ + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long co : 1; /* Change-Recording Override */ + unsigned long : 2; + unsigned long i : 1; /* Segment-Invalid Bit */ + unsigned long cs : 1; /* Common-Segment Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long : 2; +}; + +union segment_table_entry { + unsigned long val; + struct segment_entry_fc0 fc0; + struct segment_entry_fc1 fc1; + struct { + unsigned long : 53; + unsigned long fc : 1; /* Format-Control */ + unsigned long : 4; + unsigned long i : 1; /* Segment-Invalid Bit */ + unsigned long cs : 1; /* Common-Segment Bit */ + unsigned long tt : 2; /* Table-Type Bits */ + unsigned long : 2; + }; +}; + +enum { + TABLE_TYPE_SEGMENT = 0, + TABLE_TYPE_REGION3 = 1, + TABLE_TYPE_REGION2 = 2, + TABLE_TYPE_REGION1 = 3 +}; + +union page_table_entry { + unsigned long val; + struct { + unsigned long pfra : 52; /* Page-Frame Real Address */ + unsigned long z : 1; /* Zero Bit */ + unsigned long i : 1; /* Page-Invalid Bit */ + unsigned long p : 1; /* DAT-Protection Bit */ + unsigned long co : 1; /* Change-Recording Override */ + unsigned long : 8; + }; +}; + +/* + * vaddress union in order to easily decode a virtual address into its + * region first index, region second index etc. parts. + */ +union vaddress { + unsigned long addr; + struct { + unsigned long rfx : 11; + unsigned long rsx : 11; + unsigned long rtx : 11; + unsigned long sx : 11; + unsigned long px : 8; + unsigned long bx : 12; + }; + struct { + unsigned long rfx01 : 2; + unsigned long : 9; + unsigned long rsx01 : 2; + unsigned long : 9; + unsigned long rtx01 : 2; + unsigned long : 9; + unsigned long sx01 : 2; + unsigned long : 29; + }; +}; + +/* + * raddress union which will contain the result (real or absolute address) + * after a page table walk. The rfaa, sfaa and pfra members are used to + * simply assign them the value of a region, segment or page table entry. + */ +union raddress { + unsigned long addr; + unsigned long rfaa : 33; /* Region-Frame Absolute Address */ + unsigned long sfaa : 44; /* Segment-Frame Absolute Address */ + unsigned long pfra : 52; /* Page-Frame Real Address */ +}; + +static int ipte_lock_count; +static DEFINE_MUTEX(ipte_mutex); + +int ipte_lock_held(struct kvm_vcpu *vcpu) +{ + union ipte_control *ic = &vcpu->kvm->arch.sca->ipte_control; + + if (vcpu->arch.sie_block->eca & 1) + return ic->kh != 0; + return ipte_lock_count != 0; +} + +static void ipte_lock_simple(struct kvm_vcpu *vcpu) +{ + union ipte_control old, new, *ic; + + mutex_lock(&ipte_mutex); + ipte_lock_count++; + if (ipte_lock_count > 1) + goto out; + ic = &vcpu->kvm->arch.sca->ipte_control; + do { + old = ACCESS_ONCE(*ic); + while (old.k) { + cond_resched(); + old = ACCESS_ONCE(*ic); + } + new = old; + new.k = 1; + } while (cmpxchg(&ic->val, old.val, new.val) != old.val); +out: + mutex_unlock(&ipte_mutex); +} + +static void ipte_unlock_simple(struct kvm_vcpu *vcpu) +{ + union ipte_control old, new, *ic; + + mutex_lock(&ipte_mutex); + ipte_lock_count--; + if (ipte_lock_count) + goto out; + ic = &vcpu->kvm->arch.sca->ipte_control; + do { + new = old = ACCESS_ONCE(*ic); + new.k = 0; + } while (cmpxchg(&ic->val, old.val, new.val) != old.val); + if (!ipte_lock_count) + wake_up(&vcpu->kvm->arch.ipte_wq); +out: + mutex_unlock(&ipte_mutex); +} + +static void ipte_lock_siif(struct kvm_vcpu *vcpu) +{ + union ipte_control old, new, *ic; + + ic = &vcpu->kvm->arch.sca->ipte_control; + do { + old = ACCESS_ONCE(*ic); + while (old.kg) { + cond_resched(); + old = ACCESS_ONCE(*ic); + } + new = old; + new.k = 1; + new.kh++; + } while (cmpxchg(&ic->val, old.val, new.val) != old.val); +} + +static void ipte_unlock_siif(struct kvm_vcpu *vcpu) +{ + union ipte_control old, new, *ic; + + ic = &vcpu->kvm->arch.sca->ipte_control; + do { + new = old = ACCESS_ONCE(*ic); + new.kh--; + if (!new.kh) + new.k = 0; + } while (cmpxchg(&ic->val, old.val, new.val) != old.val); + if (!new.kh) + wake_up(&vcpu->kvm->arch.ipte_wq); +} + +void ipte_lock(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.sie_block->eca & 1) + ipte_lock_siif(vcpu); + else + ipte_lock_simple(vcpu); +} + +void ipte_unlock(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.sie_block->eca & 1) + ipte_unlock_siif(vcpu); + else + ipte_unlock_simple(vcpu); +} + +static unsigned long get_vcpu_asce(struct kvm_vcpu *vcpu) +{ + switch (psw_bits(vcpu->arch.sie_block->gpsw).as) { + case PSW_AS_PRIMARY: + return vcpu->arch.sie_block->gcr[1]; + case PSW_AS_SECONDARY: + return vcpu->arch.sie_block->gcr[7]; + case PSW_AS_HOME: + return vcpu->arch.sie_block->gcr[13]; + } + return 0; +} + +static int deref_table(struct kvm *kvm, unsigned long gpa, unsigned long *val) +{ + return kvm_read_guest(kvm, gpa, val, sizeof(*val)); +} + +/** + * guest_translate - translate a guest virtual into a guest absolute address + * @vcpu: virtual cpu + * @gva: guest virtual address + * @gpa: points to where guest physical (absolute) address should be stored + * @write: indicates if access is a write access + * + * Translate a guest virtual address into a guest absolute address by means + * of dynamic address translation as specified by the architecuture. + * If the resulting absolute address is not available in the configuration + * an addressing exception is indicated and @gpa will not be changed. + * + * Returns: - zero on success; @gpa contains the resulting absolute address + * - a negative value if guest access failed due to e.g. broken + * guest mapping + * - a positve value if an access exception happened. In this case + * the returned value is the program interruption code as defined + * by the architecture + */ +static unsigned long guest_translate(struct kvm_vcpu *vcpu, unsigned long gva, + unsigned long *gpa, int write) +{ + union vaddress vaddr = {.addr = gva}; + union raddress raddr = {.addr = gva}; + union page_table_entry pte; + int dat_protection = 0; + union ctlreg0 ctlreg0; + unsigned long ptr; + int edat1, edat2; + union asce asce; + + ctlreg0.val = vcpu->arch.sie_block->gcr[0]; + edat1 = ctlreg0.edat && test_vfacility(8); + edat2 = edat1 && test_vfacility(78); + asce.val = get_vcpu_asce(vcpu); + if (asce.r) + goto real_address; + ptr = asce.origin * 4096; + switch (asce.dt) { + case ASCE_TYPE_REGION1: + if (vaddr.rfx01 > asce.tl) + return PGM_REGION_FIRST_TRANS; + ptr += vaddr.rfx * 8; + break; + case ASCE_TYPE_REGION2: + if (vaddr.rfx) + return PGM_ASCE_TYPE; + if (vaddr.rsx01 > asce.tl) + return PGM_REGION_SECOND_TRANS; + ptr += vaddr.rsx * 8; + break; + case ASCE_TYPE_REGION3: + if (vaddr.rfx || vaddr.rsx) + return PGM_ASCE_TYPE; + if (vaddr.rtx01 > asce.tl) + return PGM_REGION_THIRD_TRANS; + ptr += vaddr.rtx * 8; + break; + case ASCE_TYPE_SEGMENT: + if (vaddr.rfx || vaddr.rsx || vaddr.rtx) + return PGM_ASCE_TYPE; + if (vaddr.sx01 > asce.tl) + return PGM_SEGMENT_TRANSLATION; + ptr += vaddr.sx * 8; + break; + } + switch (asce.dt) { + case ASCE_TYPE_REGION1: { + union region1_table_entry rfte; + + if (kvm_is_error_gpa(vcpu->kvm, ptr)) + return PGM_ADDRESSING; + if (deref_table(vcpu->kvm, ptr, &rfte.val)) + return -EFAULT; + if (rfte.i) + return PGM_REGION_FIRST_TRANS; + if (rfte.tt != TABLE_TYPE_REGION1) + return PGM_TRANSLATION_SPEC; + if (vaddr.rsx01 < rfte.tf || vaddr.rsx01 > rfte.tl) + return PGM_REGION_SECOND_TRANS; + if (edat1) + dat_protection |= rfte.p; + ptr = rfte.rto * 4096 + vaddr.rsx * 8; + } + /* fallthrough */ + case ASCE_TYPE_REGION2: { + union region2_table_entry rste; + + if (kvm_is_error_gpa(vcpu->kvm, ptr)) + return PGM_ADDRESSING; + if (deref_table(vcpu->kvm, ptr, &rste.val)) + return -EFAULT; + if (rste.i) + return PGM_REGION_SECOND_TRANS; + if (rste.tt != TABLE_TYPE_REGION2) + return PGM_TRANSLATION_SPEC; + if (vaddr.rtx01 < rste.tf || vaddr.rtx01 > rste.tl) + return PGM_REGION_THIRD_TRANS; + if (edat1) + dat_protection |= rste.p; + ptr = rste.rto * 4096 + vaddr.rtx * 8; + } + /* fallthrough */ + case ASCE_TYPE_REGION3: { + union region3_table_entry rtte; + + if (kvm_is_error_gpa(vcpu->kvm, ptr)) + return PGM_ADDRESSING; + if (deref_table(vcpu->kvm, ptr, &rtte.val)) + return -EFAULT; + if (rtte.i) + return PGM_REGION_THIRD_TRANS; + if (rtte.tt != TABLE_TYPE_REGION3) + return PGM_TRANSLATION_SPEC; + if (rtte.cr && asce.p && edat2) + return PGM_TRANSLATION_SPEC; + if (rtte.fc && edat2) { + dat_protection |= rtte.fc1.p; + raddr.rfaa = rtte.fc1.rfaa; + goto absolute_address; + } + if (vaddr.sx01 < rtte.fc0.tf) + return PGM_SEGMENT_TRANSLATION; + if (vaddr.sx01 > rtte.fc0.tl) + return PGM_SEGMENT_TRANSLATION; + if (edat1) + dat_protection |= rtte.fc0.p; + ptr = rtte.fc0.sto * 4096 + vaddr.sx * 8; + } + /* fallthrough */ + case ASCE_TYPE_SEGMENT: { + union segment_table_entry ste; + + if (kvm_is_error_gpa(vcpu->kvm, ptr)) + return PGM_ADDRESSING; + if (deref_table(vcpu->kvm, ptr, &ste.val)) + return -EFAULT; + if (ste.i) + return PGM_SEGMENT_TRANSLATION; + if (ste.tt != TABLE_TYPE_SEGMENT) + return PGM_TRANSLATION_SPEC; + if (ste.cs && asce.p) + return PGM_TRANSLATION_SPEC; + if (ste.fc && edat1) { + dat_protection |= ste.fc1.p; + raddr.sfaa = ste.fc1.sfaa; + goto absolute_address; + } + dat_protection |= ste.fc0.p; + ptr = ste.fc0.pto * 2048 + vaddr.px * 8; + } + } + if (kvm_is_error_gpa(vcpu->kvm, ptr)) + return PGM_ADDRESSING; + if (deref_table(vcpu->kvm, ptr, &pte.val)) + return -EFAULT; + if (pte.i) + return PGM_PAGE_TRANSLATION; + if (pte.z) + return PGM_TRANSLATION_SPEC; + if (pte.co && !edat1) + return PGM_TRANSLATION_SPEC; + dat_protection |= pte.p; + raddr.pfra = pte.pfra; +real_address: + raddr.addr = kvm_s390_real_to_abs(vcpu, raddr.addr); +absolute_address: + if (write && dat_protection) + return PGM_PROTECTION; + if (kvm_is_error_gpa(vcpu->kvm, raddr.addr)) + return PGM_ADDRESSING; + *gpa = raddr.addr; + return 0; +} + +static inline int is_low_address(unsigned long ga) +{ + /* Check for address ranges 0..511 and 4096..4607 */ + return (ga & ~0x11fful) == 0; +} + +static int low_address_protection_enabled(struct kvm_vcpu *vcpu) +{ + union ctlreg0 ctlreg0 = {.val = vcpu->arch.sie_block->gcr[0]}; + psw_t *psw = &vcpu->arch.sie_block->gpsw; + union asce asce; + + if (!ctlreg0.lap) + return 0; + asce.val = get_vcpu_asce(vcpu); + if (psw_bits(*psw).t && asce.p) + return 0; + return 1; +} + +struct trans_exc_code_bits { + unsigned long addr : 52; /* Translation-exception Address */ + unsigned long fsi : 2; /* Access Exception Fetch/Store Indication */ + unsigned long : 7; + unsigned long b61 : 1; + unsigned long as : 2; /* ASCE Identifier */ +}; + +enum { + FSI_UNKNOWN = 0, /* Unknown wether fetch or store */ + FSI_STORE = 1, /* Exception was due to store operation */ + FSI_FETCH = 2 /* Exception was due to fetch operation */ +}; + +static int guest_page_range(struct kvm_vcpu *vcpu, unsigned long ga, + unsigned long *pages, unsigned long nr_pages, + int write) +{ + struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm; + psw_t *psw = &vcpu->arch.sie_block->gpsw; + struct trans_exc_code_bits *tec_bits; + int lap_enabled, rc; + + memset(pgm, 0, sizeof(*pgm)); + tec_bits = (struct trans_exc_code_bits *)&pgm->trans_exc_code; + tec_bits->fsi = write ? FSI_STORE : FSI_FETCH; + tec_bits->as = psw_bits(*psw).as; + lap_enabled = low_address_protection_enabled(vcpu); + while (nr_pages) { + ga = kvm_s390_logical_to_effective(vcpu, ga); + tec_bits->addr = ga >> PAGE_SHIFT; + if (write && lap_enabled && is_low_address(ga)) { + pgm->code = PGM_PROTECTION; + return pgm->code; + } + ga &= PAGE_MASK; + if (psw_bits(*psw).t) { + rc = guest_translate(vcpu, ga, pages, write); + if (rc < 0) + return rc; + if (rc == PGM_PROTECTION) + tec_bits->b61 = 1; + if (rc) + pgm->code = rc; + } else { + *pages = kvm_s390_real_to_abs(vcpu, ga); + if (kvm_is_error_gpa(vcpu->kvm, *pages)) + pgm->code = PGM_ADDRESSING; + } + if (pgm->code) + return pgm->code; + ga += PAGE_SIZE; + pages++; + nr_pages--; + } + return 0; +} + +int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, void *data, + unsigned long len, int write) +{ + psw_t *psw = &vcpu->arch.sie_block->gpsw; + unsigned long _len, nr_pages, gpa, idx; + unsigned long pages_array[2]; + unsigned long *pages; + int need_ipte_lock; + union asce asce; + int rc; + + if (!len) + return 0; + /* Access register mode is not supported yet. */ + if (psw_bits(*psw).t && psw_bits(*psw).as == PSW_AS_ACCREG) + return -EOPNOTSUPP; + nr_pages = (((ga & ~PAGE_MASK) + len - 1) >> PAGE_SHIFT) + 1; + pages = pages_array; + if (nr_pages > ARRAY_SIZE(pages_array)) + pages = vmalloc(nr_pages * sizeof(unsigned long)); + if (!pages) + return -ENOMEM; + asce.val = get_vcpu_asce(vcpu); + need_ipte_lock = psw_bits(*psw).t && !asce.r; + if (need_ipte_lock) + ipte_lock(vcpu); + rc = guest_page_range(vcpu, ga, pages, nr_pages, write); + for (idx = 0; idx < nr_pages && !rc; idx++) { + gpa = *(pages + idx) + (ga & ~PAGE_MASK); + _len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len); + if (write) + rc = kvm_write_guest(vcpu->kvm, gpa, data, _len); + else + rc = kvm_read_guest(vcpu->kvm, gpa, data, _len); + len -= _len; + ga += _len; + data += _len; + } + if (need_ipte_lock) + ipte_unlock(vcpu); + if (nr_pages > ARRAY_SIZE(pages_array)) + vfree(pages); + return rc; +} + +int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, + void *data, unsigned long len, int write) +{ + unsigned long _len, gpa; + int rc = 0; + + while (len && !rc) { + gpa = kvm_s390_real_to_abs(vcpu, gra); + _len = min(PAGE_SIZE - (gpa & ~PAGE_MASK), len); + if (write) + rc = write_guest_abs(vcpu, gpa, data, _len); + else + rc = read_guest_abs(vcpu, gpa, data, _len); + len -= _len; + gra += _len; + data += _len; + } + return rc; +} + +/** + * guest_translate_address - translate guest logical into guest absolute address + * + * Parameter semantics are the same as the ones from guest_translate. + * The memory contents at the guest address are not changed. + * + * Note: The IPTE lock is not taken during this function, so the caller + * has to take care of this. + */ +int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, + unsigned long *gpa, int write) +{ + struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm; + psw_t *psw = &vcpu->arch.sie_block->gpsw; + struct trans_exc_code_bits *tec; + union asce asce; + int rc; + + /* Access register mode is not supported yet. */ + if (psw_bits(*psw).t && psw_bits(*psw).as == PSW_AS_ACCREG) + return -EOPNOTSUPP; + + gva = kvm_s390_logical_to_effective(vcpu, gva); + memset(pgm, 0, sizeof(*pgm)); + tec = (struct trans_exc_code_bits *)&pgm->trans_exc_code; + tec->as = psw_bits(*psw).as; + tec->fsi = write ? FSI_STORE : FSI_FETCH; + tec->addr = gva >> PAGE_SHIFT; + if (is_low_address(gva) && low_address_protection_enabled(vcpu)) { + if (write) { + rc = pgm->code = PGM_PROTECTION; + return rc; + } + } + + asce.val = get_vcpu_asce(vcpu); + if (psw_bits(*psw).t && !asce.r) { /* Use DAT? */ + rc = guest_translate(vcpu, gva, gpa, write); + if (rc > 0) { + if (rc == PGM_PROTECTION) + tec->b61 = 1; + pgm->code = rc; + } + } else { + rc = 0; + *gpa = kvm_s390_real_to_abs(vcpu, gva); + if (kvm_is_error_gpa(vcpu->kvm, *gpa)) + rc = pgm->code = PGM_ADDRESSING; + } + + return rc; +} + +/** + * kvm_s390_check_low_addr_protection - check for low-address protection + * @ga: Guest address + * + * Checks whether an address is subject to low-address protection and set + * up vcpu->arch.pgm accordingly if necessary. + * + * Return: 0 if no protection exception, or PGM_PROTECTION if protected. + */ +int kvm_s390_check_low_addr_protection(struct kvm_vcpu *vcpu, unsigned long ga) +{ + struct kvm_s390_pgm_info *pgm = &vcpu->arch.pgm; + psw_t *psw = &vcpu->arch.sie_block->gpsw; + struct trans_exc_code_bits *tec_bits; + + if (!is_low_address(ga) || !low_address_protection_enabled(vcpu)) + return 0; + + memset(pgm, 0, sizeof(*pgm)); + tec_bits = (struct trans_exc_code_bits *)&pgm->trans_exc_code; + tec_bits->fsi = FSI_STORE; + tec_bits->as = psw_bits(*psw).as; + tec_bits->addr = ga >> PAGE_SHIFT; + pgm->code = PGM_PROTECTION; + + return pgm->code; +} diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h index 374a439ccc60..0149cf15058a 100644 --- a/arch/s390/kvm/gaccess.h +++ b/arch/s390/kvm/gaccess.h @@ -1,7 +1,7 @@ /* * access guest memory * - * Copyright IBM Corp. 2008, 2009 + * Copyright IBM Corp. 2008, 2014 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License (version 2 only) @@ -15,100 +15,321 @@ #include <linux/compiler.h> #include <linux/kvm_host.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> +#include <linux/ptrace.h> #include "kvm-s390.h" -/* Convert real to absolute address by applying the prefix of the CPU */ +/** + * kvm_s390_real_to_abs - convert guest real address to guest absolute address + * @vcpu - guest virtual cpu + * @gra - guest real address + * + * Returns the guest absolute address that corresponds to the passed guest real + * address @gra of a virtual guest cpu by applying its prefix. + */ static inline unsigned long kvm_s390_real_to_abs(struct kvm_vcpu *vcpu, - unsigned long gaddr) + unsigned long gra) { - unsigned long prefix = vcpu->arch.sie_block->prefix; - if (gaddr < 2 * PAGE_SIZE) - gaddr += prefix; - else if (gaddr >= prefix && gaddr < prefix + 2 * PAGE_SIZE) - gaddr -= prefix; - return gaddr; + unsigned long prefix = kvm_s390_get_prefix(vcpu); + + if (gra < 2 * PAGE_SIZE) + gra += prefix; + else if (gra >= prefix && gra < prefix + 2 * PAGE_SIZE) + gra -= prefix; + return gra; } -static inline void __user *__gptr_to_uptr(struct kvm_vcpu *vcpu, - void __user *gptr, - int prefixing) +/** + * kvm_s390_logical_to_effective - convert guest logical to effective address + * @vcpu: guest virtual cpu + * @ga: guest logical address + * + * Convert a guest vcpu logical address to a guest vcpu effective address by + * applying the rules of the vcpu's addressing mode defined by PSW bits 31 + * and 32 (extendended/basic addressing mode). + * + * Depending on the vcpu's addressing mode the upper 40 bits (24 bit addressing + * mode), 33 bits (31 bit addressing mode) or no bits (64 bit addressing mode) + * of @ga will be zeroed and the remaining bits will be returned. + */ +static inline unsigned long kvm_s390_logical_to_effective(struct kvm_vcpu *vcpu, + unsigned long ga) { - unsigned long gaddr = (unsigned long) gptr; - unsigned long uaddr; - - if (prefixing) - gaddr = kvm_s390_real_to_abs(vcpu, gaddr); - uaddr = gmap_fault(gaddr, vcpu->arch.gmap); - if (IS_ERR_VALUE(uaddr)) - uaddr = -EFAULT; - return (void __user *)uaddr; + psw_t *psw = &vcpu->arch.sie_block->gpsw; + + if (psw_bits(*psw).eaba == PSW_AMODE_64BIT) + return ga; + if (psw_bits(*psw).eaba == PSW_AMODE_31BIT) + return ga & ((1UL << 31) - 1); + return ga & ((1UL << 24) - 1); } -#define get_guest(vcpu, x, gptr) \ -({ \ - __typeof__(gptr) __uptr = __gptr_to_uptr(vcpu, gptr, 1);\ - int __mask = sizeof(__typeof__(*(gptr))) - 1; \ - int __ret; \ - \ - if (IS_ERR((void __force *)__uptr)) { \ - __ret = PTR_ERR((void __force *)__uptr); \ - } else { \ - BUG_ON((unsigned long)__uptr & __mask); \ - __ret = get_user(x, __uptr); \ - } \ - __ret; \ -}) +/* + * put_guest_lc, read_guest_lc and write_guest_lc are guest access functions + * which shall only be used to access the lowcore of a vcpu. + * These functions should be used for e.g. interrupt handlers where no + * guest memory access protection facilities, like key or low address + * protection, are applicable. + * At a later point guest vcpu lowcore access should happen via pinned + * prefix pages, so that these pages can be accessed directly via the + * kernel mapping. All of these *_lc functions can be removed then. + */ -#define put_guest(vcpu, x, gptr) \ +/** + * put_guest_lc - write a simple variable to a guest vcpu's lowcore + * @vcpu: virtual cpu + * @x: value to copy to guest + * @gra: vcpu's destination guest real address + * + * Copies a simple value from kernel space to a guest vcpu's lowcore. + * The size of the variable may be 1, 2, 4 or 8 bytes. The destination + * must be located in the vcpu's lowcore. Otherwise the result is undefined. + * + * Returns zero on success or -EFAULT on error. + * + * Note: an error indicates that either the kernel is out of memory or + * the guest memory mapping is broken. In any case the best solution + * would be to terminate the guest. + * It is wrong to inject a guest exception. + */ +#define put_guest_lc(vcpu, x, gra) \ ({ \ - __typeof__(gptr) __uptr = __gptr_to_uptr(vcpu, gptr, 1);\ - int __mask = sizeof(__typeof__(*(gptr))) - 1; \ - int __ret; \ + struct kvm_vcpu *__vcpu = (vcpu); \ + __typeof__(*(gra)) __x = (x); \ + unsigned long __gpa; \ \ - if (IS_ERR((void __force *)__uptr)) { \ - __ret = PTR_ERR((void __force *)__uptr); \ - } else { \ - BUG_ON((unsigned long)__uptr & __mask); \ - __ret = put_user(x, __uptr); \ - } \ - __ret; \ + __gpa = (unsigned long)(gra); \ + __gpa += kvm_s390_get_prefix(__vcpu); \ + kvm_write_guest(__vcpu->kvm, __gpa, &__x, sizeof(__x)); \ }) -static inline int __copy_guest(struct kvm_vcpu *vcpu, unsigned long to, - unsigned long from, unsigned long len, - int to_guest, int prefixing) +/** + * write_guest_lc - copy data from kernel space to guest vcpu's lowcore + * @vcpu: virtual cpu + * @gra: vcpu's source guest real address + * @data: source address in kernel space + * @len: number of bytes to copy + * + * Copy data from kernel space to guest vcpu's lowcore. The entire range must + * be located within the vcpu's lowcore, otherwise the result is undefined. + * + * Returns zero on success or -EFAULT on error. + * + * Note: an error indicates that either the kernel is out of memory or + * the guest memory mapping is broken. In any case the best solution + * would be to terminate the guest. + * It is wrong to inject a guest exception. + */ +static inline __must_check +int write_guest_lc(struct kvm_vcpu *vcpu, unsigned long gra, void *data, + unsigned long len) +{ + unsigned long gpa = gra + kvm_s390_get_prefix(vcpu); + + return kvm_write_guest(vcpu->kvm, gpa, data, len); +} + +/** + * read_guest_lc - copy data from guest vcpu's lowcore to kernel space + * @vcpu: virtual cpu + * @gra: vcpu's source guest real address + * @data: destination address in kernel space + * @len: number of bytes to copy + * + * Copy data from guest vcpu's lowcore to kernel space. The entire range must + * be located within the vcpu's lowcore, otherwise the result is undefined. + * + * Returns zero on success or -EFAULT on error. + * + * Note: an error indicates that either the kernel is out of memory or + * the guest memory mapping is broken. In any case the best solution + * would be to terminate the guest. + * It is wrong to inject a guest exception. + */ +static inline __must_check +int read_guest_lc(struct kvm_vcpu *vcpu, unsigned long gra, void *data, + unsigned long len) +{ + unsigned long gpa = gra + kvm_s390_get_prefix(vcpu); + + return kvm_read_guest(vcpu->kvm, gpa, data, len); +} + +int guest_translate_address(struct kvm_vcpu *vcpu, unsigned long gva, + unsigned long *gpa, int write); + +int access_guest(struct kvm_vcpu *vcpu, unsigned long ga, void *data, + unsigned long len, int write); + +int access_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, + void *data, unsigned long len, int write); + +/** + * write_guest - copy data from kernel space to guest space + * @vcpu: virtual cpu + * @ga: guest address + * @data: source address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @data (kernel space) to @ga (guest address). + * In order to copy data to guest space the PSW of the vcpu is inspected: + * If DAT is off data will be copied to guest real or absolute memory. + * If DAT is on data will be copied to the address space as specified by + * the address space bits of the PSW: + * Primary, secondory or home space (access register mode is currently not + * implemented). + * The addressing mode of the PSW is also inspected, so that address wrap + * around is taken into account for 24-, 31- and 64-bit addressing mode, + * if the to be copied data crosses page boundaries in guest address space. + * In addition also low address and DAT protection are inspected before + * copying any data (key protection is currently not implemented). + * + * This function modifies the 'struct kvm_s390_pgm_info pgm' member of @vcpu. + * In case of an access exception (e.g. protection exception) pgm will contain + * all data necessary so that a subsequent call to 'kvm_s390_inject_prog_vcpu()' + * will inject a correct exception into the guest. + * If no access exception happened, the contents of pgm are undefined when + * this function returns. + * + * Returns: - zero on success + * - a negative value if e.g. the guest mapping is broken or in + * case of out-of-memory. In this case the contents of pgm are + * undefined. Also parts of @data may have been copied to guest + * space. + * - a positive value if an access exception happened. In this case + * the returned value is the program interruption code and the + * contents of pgm may be used to inject an exception into the + * guest. No data has been copied to guest space. + * + * Note: in case an access exception is recognized no data has been copied to + * guest space (this is also true, if the to be copied data would cross + * one or more page boundaries in guest space). + * Therefore this function may be used for nullifying and suppressing + * instruction emulation. + * It may also be used for terminating instructions, if it is undefined + * if data has been changed in guest space in case of an exception. + */ +static inline __must_check +int write_guest(struct kvm_vcpu *vcpu, unsigned long ga, void *data, + unsigned long len) +{ + return access_guest(vcpu, ga, data, len, 1); +} + +/** + * read_guest - copy data from guest space to kernel space + * @vcpu: virtual cpu + * @ga: guest address + * @data: destination address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @ga (guest address) to @data (kernel space). + * + * The behaviour of read_guest is identical to write_guest, except that + * data will be copied from guest space to kernel space. + */ +static inline __must_check +int read_guest(struct kvm_vcpu *vcpu, unsigned long ga, void *data, + unsigned long len) +{ + return access_guest(vcpu, ga, data, len, 0); +} + +/** + * write_guest_abs - copy data from kernel space to guest space absolute + * @vcpu: virtual cpu + * @gpa: guest physical (absolute) address + * @data: source address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @data (kernel space) to @gpa (guest absolute address). + * It is up to the caller to ensure that the entire guest memory range is + * valid memory before calling this function. + * Guest low address and key protection are not checked. + * + * Returns zero on success or -EFAULT on error. + * + * If an error occurs data may have been copied partially to guest memory. + */ +static inline __must_check +int write_guest_abs(struct kvm_vcpu *vcpu, unsigned long gpa, void *data, + unsigned long len) +{ + return kvm_write_guest(vcpu->kvm, gpa, data, len); +} + +/** + * read_guest_abs - copy data from guest space absolute to kernel space + * @vcpu: virtual cpu + * @gpa: guest physical (absolute) address + * @data: destination address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @gpa (guest absolute address) to @data (kernel space). + * It is up to the caller to ensure that the entire guest memory range is + * valid memory before calling this function. + * Guest key protection is not checked. + * + * Returns zero on success or -EFAULT on error. + * + * If an error occurs data may have been copied partially to kernel space. + */ +static inline __must_check +int read_guest_abs(struct kvm_vcpu *vcpu, unsigned long gpa, void *data, + unsigned long len) +{ + return kvm_read_guest(vcpu->kvm, gpa, data, len); +} + +/** + * write_guest_real - copy data from kernel space to guest space real + * @vcpu: virtual cpu + * @gra: guest real address + * @data: source address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @data (kernel space) to @gra (guest real address). + * It is up to the caller to ensure that the entire guest memory range is + * valid memory before calling this function. + * Guest low address and key protection are not checked. + * + * Returns zero on success or -EFAULT on error. + * + * If an error occurs data may have been copied partially to guest memory. + */ +static inline __must_check +int write_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, void *data, + unsigned long len) +{ + return access_guest_real(vcpu, gra, data, len, 1); +} + +/** + * read_guest_real - copy data from guest space real to kernel space + * @vcpu: virtual cpu + * @gra: guest real address + * @data: destination address in kernel space + * @len: number of bytes to copy + * + * Copy @len bytes from @gra (guest real address) to @data (kernel space). + * It is up to the caller to ensure that the entire guest memory range is + * valid memory before calling this function. + * Guest key protection is not checked. + * + * Returns zero on success or -EFAULT on error. + * + * If an error occurs data may have been copied partially to kernel space. + */ +static inline __must_check +int read_guest_real(struct kvm_vcpu *vcpu, unsigned long gra, void *data, + unsigned long len) { - unsigned long _len, rc; - void __user *uptr; - - while (len) { - uptr = to_guest ? (void __user *)to : (void __user *)from; - uptr = __gptr_to_uptr(vcpu, uptr, prefixing); - if (IS_ERR((void __force *)uptr)) - return -EFAULT; - _len = PAGE_SIZE - ((unsigned long)uptr & (PAGE_SIZE - 1)); - _len = min(_len, len); - if (to_guest) - rc = copy_to_user((void __user *) uptr, (void *)from, _len); - else - rc = copy_from_user((void *)to, (void __user *)uptr, _len); - if (rc) - return -EFAULT; - len -= _len; - from += _len; - to += _len; - } - return 0; + return access_guest_real(vcpu, gra, data, len, 0); } -#define copy_to_guest(vcpu, to, from, size) \ - __copy_guest(vcpu, to, (unsigned long)from, size, 1, 1) -#define copy_from_guest(vcpu, to, from, size) \ - __copy_guest(vcpu, (unsigned long)to, from, size, 0, 1) -#define copy_to_guest_absolute(vcpu, to, from, size) \ - __copy_guest(vcpu, to, (unsigned long)from, size, 1, 0) -#define copy_from_guest_absolute(vcpu, to, from, size) \ - __copy_guest(vcpu, (unsigned long)to, from, size, 0, 0) +void ipte_lock(struct kvm_vcpu *vcpu); +void ipte_unlock(struct kvm_vcpu *vcpu); +int ipte_lock_held(struct kvm_vcpu *vcpu); +int kvm_s390_check_low_addr_protection(struct kvm_vcpu *vcpu, unsigned long ga); #endif /* __KVM_S390_GACCESS_H */ diff --git a/arch/s390/kvm/guestdbg.c b/arch/s390/kvm/guestdbg.c new file mode 100644 index 000000000000..3e8d4092ce30 --- /dev/null +++ b/arch/s390/kvm/guestdbg.c @@ -0,0 +1,482 @@ +/* + * kvm guest debug support + * + * Copyright IBM Corp. 2014 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): David Hildenbrand <dahi@linux.vnet.ibm.com> + */ +#include <linux/kvm_host.h> +#include <linux/errno.h> +#include "kvm-s390.h" +#include "gaccess.h" + +/* + * Extends the address range given by *start and *stop to include the address + * range starting with estart and the length len. Takes care of overflowing + * intervals and tries to minimize the overall intervall size. + */ +static void extend_address_range(u64 *start, u64 *stop, u64 estart, int len) +{ + u64 estop; + + if (len > 0) + len--; + else + len = 0; + + estop = estart + len; + + /* 0-0 range represents "not set" */ + if ((*start == 0) && (*stop == 0)) { + *start = estart; + *stop = estop; + } else if (*start <= *stop) { + /* increase the existing range */ + if (estart < *start) + *start = estart; + if (estop > *stop) + *stop = estop; + } else { + /* "overflowing" interval, whereby *stop > *start */ + if (estart <= *stop) { + if (estop > *stop) + *stop = estop; + } else if (estop > *start) { + if (estart < *start) + *start = estart; + } + /* minimize the range */ + else if ((estop - *stop) < (*start - estart)) + *stop = estop; + else + *start = estart; + } +} + +#define MAX_INST_SIZE 6 + +static void enable_all_hw_bp(struct kvm_vcpu *vcpu) +{ + unsigned long start, len; + u64 *cr9 = &vcpu->arch.sie_block->gcr[9]; + u64 *cr10 = &vcpu->arch.sie_block->gcr[10]; + u64 *cr11 = &vcpu->arch.sie_block->gcr[11]; + int i; + + if (vcpu->arch.guestdbg.nr_hw_bp <= 0 || + vcpu->arch.guestdbg.hw_bp_info == NULL) + return; + + /* + * If the guest is not interrested in branching events, we can savely + * limit them to the PER address range. + */ + if (!(*cr9 & PER_EVENT_BRANCH)) + *cr9 |= PER_CONTROL_BRANCH_ADDRESS; + *cr9 |= PER_EVENT_IFETCH | PER_EVENT_BRANCH; + + for (i = 0; i < vcpu->arch.guestdbg.nr_hw_bp; i++) { + start = vcpu->arch.guestdbg.hw_bp_info[i].addr; + len = vcpu->arch.guestdbg.hw_bp_info[i].len; + + /* + * The instruction in front of the desired bp has to + * report instruction-fetching events + */ + if (start < MAX_INST_SIZE) { + len += start; + start = 0; + } else { + start -= MAX_INST_SIZE; + len += MAX_INST_SIZE; + } + + extend_address_range(cr10, cr11, start, len); + } +} + +static void enable_all_hw_wp(struct kvm_vcpu *vcpu) +{ + unsigned long start, len; + u64 *cr9 = &vcpu->arch.sie_block->gcr[9]; + u64 *cr10 = &vcpu->arch.sie_block->gcr[10]; + u64 *cr11 = &vcpu->arch.sie_block->gcr[11]; + int i; + + if (vcpu->arch.guestdbg.nr_hw_wp <= 0 || + vcpu->arch.guestdbg.hw_wp_info == NULL) + return; + + /* if host uses storage alternation for special address + * spaces, enable all events and give all to the guest */ + if (*cr9 & PER_EVENT_STORE && *cr9 & PER_CONTROL_ALTERATION) { + *cr9 &= ~PER_CONTROL_ALTERATION; + *cr10 = 0; + *cr11 = PSW_ADDR_INSN; + } else { + *cr9 &= ~PER_CONTROL_ALTERATION; + *cr9 |= PER_EVENT_STORE; + + for (i = 0; i < vcpu->arch.guestdbg.nr_hw_wp; i++) { + start = vcpu->arch.guestdbg.hw_wp_info[i].addr; + len = vcpu->arch.guestdbg.hw_wp_info[i].len; + + extend_address_range(cr10, cr11, start, len); + } + } +} + +void kvm_s390_backup_guest_per_regs(struct kvm_vcpu *vcpu) +{ + vcpu->arch.guestdbg.cr0 = vcpu->arch.sie_block->gcr[0]; + vcpu->arch.guestdbg.cr9 = vcpu->arch.sie_block->gcr[9]; + vcpu->arch.guestdbg.cr10 = vcpu->arch.sie_block->gcr[10]; + vcpu->arch.guestdbg.cr11 = vcpu->arch.sie_block->gcr[11]; +} + +void kvm_s390_restore_guest_per_regs(struct kvm_vcpu *vcpu) +{ + vcpu->arch.sie_block->gcr[0] = vcpu->arch.guestdbg.cr0; + vcpu->arch.sie_block->gcr[9] = vcpu->arch.guestdbg.cr9; + vcpu->arch.sie_block->gcr[10] = vcpu->arch.guestdbg.cr10; + vcpu->arch.sie_block->gcr[11] = vcpu->arch.guestdbg.cr11; +} + +void kvm_s390_patch_guest_per_regs(struct kvm_vcpu *vcpu) +{ + /* + * TODO: if guest psw has per enabled, otherwise 0s! + * This reduces the amount of reported events. + * Need to intercept all psw changes! + */ + + if (guestdbg_sstep_enabled(vcpu)) { + /* disable timer (clock-comparator) interrupts */ + vcpu->arch.sie_block->gcr[0] &= ~0x800ul; + vcpu->arch.sie_block->gcr[9] |= PER_EVENT_IFETCH; + vcpu->arch.sie_block->gcr[10] = 0; + vcpu->arch.sie_block->gcr[11] = PSW_ADDR_INSN; + } + + if (guestdbg_hw_bp_enabled(vcpu)) { + enable_all_hw_bp(vcpu); + enable_all_hw_wp(vcpu); + } + + /* TODO: Instruction-fetching-nullification not allowed for now */ + if (vcpu->arch.sie_block->gcr[9] & PER_EVENT_NULLIFICATION) + vcpu->arch.sie_block->gcr[9] &= ~PER_EVENT_NULLIFICATION; +} + +#define MAX_WP_SIZE 100 + +static int __import_wp_info(struct kvm_vcpu *vcpu, + struct kvm_hw_breakpoint *bp_data, + struct kvm_hw_wp_info_arch *wp_info) +{ + int ret = 0; + wp_info->len = bp_data->len; + wp_info->addr = bp_data->addr; + wp_info->phys_addr = bp_data->phys_addr; + wp_info->old_data = NULL; + + if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) + return -EINVAL; + + wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL); + if (!wp_info->old_data) + return -ENOMEM; + /* try to backup the original value */ + ret = read_guest(vcpu, wp_info->phys_addr, wp_info->old_data, + wp_info->len); + if (ret) { + kfree(wp_info->old_data); + wp_info->old_data = NULL; + } + + return ret; +} + +#define MAX_BP_COUNT 50 + +int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu, + struct kvm_guest_debug *dbg) +{ + int ret = 0, nr_wp = 0, nr_bp = 0, i, size; + struct kvm_hw_breakpoint *bp_data = NULL; + struct kvm_hw_wp_info_arch *wp_info = NULL; + struct kvm_hw_bp_info_arch *bp_info = NULL; + + if (dbg->arch.nr_hw_bp <= 0 || !dbg->arch.hw_bp) + return 0; + else if (dbg->arch.nr_hw_bp > MAX_BP_COUNT) + return -EINVAL; + + size = dbg->arch.nr_hw_bp * sizeof(struct kvm_hw_breakpoint); + bp_data = kmalloc(size, GFP_KERNEL); + if (!bp_data) { + ret = -ENOMEM; + goto error; + } + + if (copy_from_user(bp_data, dbg->arch.hw_bp, size)) { + ret = -EFAULT; + goto error; + } + + for (i = 0; i < dbg->arch.nr_hw_bp; i++) { + switch (bp_data[i].type) { + case KVM_HW_WP_WRITE: + nr_wp++; + break; + case KVM_HW_BP: + nr_bp++; + break; + default: + break; + } + } + + size = nr_wp * sizeof(struct kvm_hw_wp_info_arch); + if (size > 0) { + wp_info = kmalloc(size, GFP_KERNEL); + if (!wp_info) { + ret = -ENOMEM; + goto error; + } + } + size = nr_bp * sizeof(struct kvm_hw_bp_info_arch); + if (size > 0) { + bp_info = kmalloc(size, GFP_KERNEL); + if (!bp_info) { + ret = -ENOMEM; + goto error; + } + } + + for (nr_wp = 0, nr_bp = 0, i = 0; i < dbg->arch.nr_hw_bp; i++) { + switch (bp_data[i].type) { + case KVM_HW_WP_WRITE: + ret = __import_wp_info(vcpu, &bp_data[i], + &wp_info[nr_wp]); + if (ret) + goto error; + nr_wp++; + break; + case KVM_HW_BP: + bp_info[nr_bp].len = bp_data[i].len; + bp_info[nr_bp].addr = bp_data[i].addr; + nr_bp++; + break; + } + } + + vcpu->arch.guestdbg.nr_hw_bp = nr_bp; + vcpu->arch.guestdbg.hw_bp_info = bp_info; + vcpu->arch.guestdbg.nr_hw_wp = nr_wp; + vcpu->arch.guestdbg.hw_wp_info = wp_info; + return 0; +error: + kfree(bp_data); + kfree(wp_info); + kfree(bp_info); + return ret; +} + +void kvm_s390_clear_bp_data(struct kvm_vcpu *vcpu) +{ + int i; + struct kvm_hw_wp_info_arch *hw_wp_info = NULL; + + for (i = 0; i < vcpu->arch.guestdbg.nr_hw_wp; i++) { + hw_wp_info = &vcpu->arch.guestdbg.hw_wp_info[i]; + kfree(hw_wp_info->old_data); + hw_wp_info->old_data = NULL; + } + kfree(vcpu->arch.guestdbg.hw_wp_info); + vcpu->arch.guestdbg.hw_wp_info = NULL; + + kfree(vcpu->arch.guestdbg.hw_bp_info); + vcpu->arch.guestdbg.hw_bp_info = NULL; + + vcpu->arch.guestdbg.nr_hw_wp = 0; + vcpu->arch.guestdbg.nr_hw_bp = 0; +} + +static inline int in_addr_range(u64 addr, u64 a, u64 b) +{ + if (a <= b) + return (addr >= a) && (addr <= b); + else + /* "overflowing" interval */ + return (addr <= a) && (addr >= b); +} + +#define end_of_range(bp_info) (bp_info->addr + bp_info->len - 1) + +static struct kvm_hw_bp_info_arch *find_hw_bp(struct kvm_vcpu *vcpu, + unsigned long addr) +{ + struct kvm_hw_bp_info_arch *bp_info = vcpu->arch.guestdbg.hw_bp_info; + int i; + + if (vcpu->arch.guestdbg.nr_hw_bp == 0) + return NULL; + + for (i = 0; i < vcpu->arch.guestdbg.nr_hw_bp; i++) { + /* addr is directly the start or in the range of a bp */ + if (addr == bp_info->addr) + goto found; + if (bp_info->len > 0 && + in_addr_range(addr, bp_info->addr, end_of_range(bp_info))) + goto found; + + bp_info++; + } + + return NULL; +found: + return bp_info; +} + +static struct kvm_hw_wp_info_arch *any_wp_changed(struct kvm_vcpu *vcpu) +{ + int i; + struct kvm_hw_wp_info_arch *wp_info = NULL; + void *temp = NULL; + + if (vcpu->arch.guestdbg.nr_hw_wp == 0) + return NULL; + + for (i = 0; i < vcpu->arch.guestdbg.nr_hw_wp; i++) { + wp_info = &vcpu->arch.guestdbg.hw_wp_info[i]; + if (!wp_info || !wp_info->old_data || wp_info->len <= 0) + continue; + + temp = kmalloc(wp_info->len, GFP_KERNEL); + if (!temp) + continue; + + /* refetch the wp data and compare it to the old value */ + if (!read_guest(vcpu, wp_info->phys_addr, temp, + wp_info->len)) { + if (memcmp(temp, wp_info->old_data, wp_info->len)) { + kfree(temp); + return wp_info; + } + } + kfree(temp); + temp = NULL; + } + + return NULL; +} + +void kvm_s390_prepare_debug_exit(struct kvm_vcpu *vcpu) +{ + vcpu->run->exit_reason = KVM_EXIT_DEBUG; + vcpu->guest_debug &= ~KVM_GUESTDBG_EXIT_PENDING; +} + +#define per_bp_event(code) \ + (code & (PER_EVENT_IFETCH | PER_EVENT_BRANCH)) +#define per_write_wp_event(code) \ + (code & (PER_EVENT_STORE | PER_EVENT_STORE_REAL)) + +static int debug_exit_required(struct kvm_vcpu *vcpu) +{ + u32 perc = (vcpu->arch.sie_block->perc << 24); + struct kvm_debug_exit_arch *debug_exit = &vcpu->run->debug.arch; + struct kvm_hw_wp_info_arch *wp_info = NULL; + struct kvm_hw_bp_info_arch *bp_info = NULL; + unsigned long addr = vcpu->arch.sie_block->gpsw.addr; + unsigned long peraddr = vcpu->arch.sie_block->peraddr; + + if (guestdbg_hw_bp_enabled(vcpu)) { + if (per_write_wp_event(perc) && + vcpu->arch.guestdbg.nr_hw_wp > 0) { + wp_info = any_wp_changed(vcpu); + if (wp_info) { + debug_exit->addr = wp_info->addr; + debug_exit->type = KVM_HW_WP_WRITE; + goto exit_required; + } + } + if (per_bp_event(perc) && + vcpu->arch.guestdbg.nr_hw_bp > 0) { + bp_info = find_hw_bp(vcpu, addr); + /* remove duplicate events if PC==PER address */ + if (bp_info && (addr != peraddr)) { + debug_exit->addr = addr; + debug_exit->type = KVM_HW_BP; + vcpu->arch.guestdbg.last_bp = addr; + goto exit_required; + } + /* breakpoint missed */ + bp_info = find_hw_bp(vcpu, peraddr); + if (bp_info && vcpu->arch.guestdbg.last_bp != peraddr) { + debug_exit->addr = peraddr; + debug_exit->type = KVM_HW_BP; + goto exit_required; + } + } + } + if (guestdbg_sstep_enabled(vcpu) && per_bp_event(perc)) { + debug_exit->addr = addr; + debug_exit->type = KVM_SINGLESTEP; + goto exit_required; + } + + return 0; +exit_required: + return 1; +} + +#define guest_per_enabled(vcpu) \ + (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PER) + +static void filter_guest_per_event(struct kvm_vcpu *vcpu) +{ + u32 perc = vcpu->arch.sie_block->perc << 24; + u64 peraddr = vcpu->arch.sie_block->peraddr; + u64 addr = vcpu->arch.sie_block->gpsw.addr; + u64 cr9 = vcpu->arch.sie_block->gcr[9]; + u64 cr10 = vcpu->arch.sie_block->gcr[10]; + u64 cr11 = vcpu->arch.sie_block->gcr[11]; + /* filter all events, demanded by the guest */ + u32 guest_perc = perc & cr9 & PER_EVENT_MASK; + + if (!guest_per_enabled(vcpu)) + guest_perc = 0; + + /* filter "successful-branching" events */ + if (guest_perc & PER_EVENT_BRANCH && + cr9 & PER_CONTROL_BRANCH_ADDRESS && + !in_addr_range(addr, cr10, cr11)) + guest_perc &= ~PER_EVENT_BRANCH; + + /* filter "instruction-fetching" events */ + if (guest_perc & PER_EVENT_IFETCH && + !in_addr_range(peraddr, cr10, cr11)) + guest_perc &= ~PER_EVENT_IFETCH; + + /* All other PER events will be given to the guest */ + /* TODO: Check alterated address/address space */ + + vcpu->arch.sie_block->perc = guest_perc >> 24; + + if (!guest_perc) + vcpu->arch.sie_block->iprcc &= ~PGM_PER; +} + +void kvm_s390_handle_per_event(struct kvm_vcpu *vcpu) +{ + if (debug_exit_required(vcpu)) + vcpu->guest_debug |= KVM_GUESTDBG_EXIT_PENDING; + + filter_guest_per_event(vcpu); +} diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index eeb1ac7d8fa4..a0b586c1913c 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -1,7 +1,7 @@ /* * in-kernel handling for sie intercepts * - * Copyright IBM Corp. 2008, 2009 + * Copyright IBM Corp. 2008, 2014 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License (version 2 only) @@ -16,6 +16,8 @@ #include <linux/pagemap.h> #include <asm/kvm_host.h> +#include <asm/asm-offsets.h> +#include <asm/irq.h> #include "kvm-s390.h" #include "gaccess.h" @@ -29,6 +31,7 @@ static const intercept_handler_t instruction_handlers[256] = { [0x83] = kvm_s390_handle_diag, [0xae] = kvm_s390_handle_sigp, [0xb2] = kvm_s390_handle_b2, + [0xb6] = kvm_s390_handle_stctl, [0xb7] = kvm_s390_handle_lctl, [0xb9] = kvm_s390_handle_b9, [0xe5] = kvm_s390_handle_e5, @@ -44,9 +47,6 @@ static int handle_noop(struct kvm_vcpu *vcpu) case 0x10: vcpu->stat.exit_external_request++; break; - case 0x14: - vcpu->stat.exit_external_interrupt++; - break; default: break; /* nothing */ } @@ -63,8 +63,7 @@ static int handle_stop(struct kvm_vcpu *vcpu) trace_kvm_s390_stop_request(vcpu->arch.local_int.action_bits); if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) { - atomic_set_mask(CPUSTAT_STOPPED, - &vcpu->arch.sie_block->cpuflags); + kvm_s390_vcpu_stop(vcpu); vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP; VCPU_EVENT(vcpu, 3, "%s", "cpu stopped"); rc = -EOPNOTSUPP; @@ -109,22 +108,120 @@ static int handle_instruction(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; } +static void __extract_prog_irq(struct kvm_vcpu *vcpu, + struct kvm_s390_pgm_info *pgm_info) +{ + memset(pgm_info, 0, sizeof(struct kvm_s390_pgm_info)); + pgm_info->code = vcpu->arch.sie_block->iprcc; + + switch (vcpu->arch.sie_block->iprcc & ~PGM_PER) { + case PGM_AFX_TRANSLATION: + case PGM_ASX_TRANSLATION: + case PGM_EX_TRANSLATION: + case PGM_LFX_TRANSLATION: + case PGM_LSTE_SEQUENCE: + case PGM_LSX_TRANSLATION: + case PGM_LX_TRANSLATION: + case PGM_PRIMARY_AUTHORITY: + case PGM_SECONDARY_AUTHORITY: + case PGM_SPACE_SWITCH: + pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc; + break; + case PGM_ALEN_TRANSLATION: + case PGM_ALE_SEQUENCE: + case PGM_ASTE_INSTANCE: + case PGM_ASTE_SEQUENCE: + case PGM_ASTE_VALIDITY: + case PGM_EXTENDED_AUTHORITY: + pgm_info->exc_access_id = vcpu->arch.sie_block->eai; + break; + case PGM_ASCE_TYPE: + case PGM_PAGE_TRANSLATION: + case PGM_REGION_FIRST_TRANS: + case PGM_REGION_SECOND_TRANS: + case PGM_REGION_THIRD_TRANS: + case PGM_SEGMENT_TRANSLATION: + pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc; + pgm_info->exc_access_id = vcpu->arch.sie_block->eai; + pgm_info->op_access_id = vcpu->arch.sie_block->oai; + break; + case PGM_MONITOR: + pgm_info->mon_class_nr = vcpu->arch.sie_block->mcn; + pgm_info->mon_code = vcpu->arch.sie_block->tecmc; + break; + case PGM_DATA: + pgm_info->data_exc_code = vcpu->arch.sie_block->dxc; + break; + case PGM_PROTECTION: + pgm_info->trans_exc_code = vcpu->arch.sie_block->tecmc; + pgm_info->exc_access_id = vcpu->arch.sie_block->eai; + break; + default: + break; + } + + if (vcpu->arch.sie_block->iprcc & PGM_PER) { + pgm_info->per_code = vcpu->arch.sie_block->perc; + pgm_info->per_atmid = vcpu->arch.sie_block->peratmid; + pgm_info->per_address = vcpu->arch.sie_block->peraddr; + pgm_info->per_access_id = vcpu->arch.sie_block->peraid; + } +} + +/* + * restore ITDB to program-interruption TDB in guest lowcore + * and set TX abort indication if required +*/ +static int handle_itdb(struct kvm_vcpu *vcpu) +{ + struct kvm_s390_itdb *itdb; + int rc; + + if (!IS_TE_ENABLED(vcpu) || !IS_ITDB_VALID(vcpu)) + return 0; + if (current->thread.per_flags & PER_FLAG_NO_TE) + return 0; + itdb = (struct kvm_s390_itdb *)vcpu->arch.sie_block->itdba; + rc = write_guest_lc(vcpu, __LC_PGM_TDB, itdb, sizeof(*itdb)); + if (rc) + return rc; + memset(itdb, 0, sizeof(*itdb)); + + return 0; +} + +#define per_event(vcpu) (vcpu->arch.sie_block->iprcc & PGM_PER) + static int handle_prog(struct kvm_vcpu *vcpu) { + struct kvm_s390_pgm_info pgm_info; + psw_t psw; + int rc; + vcpu->stat.exit_program_interruption++; - /* Restore ITDB to Program-Interruption TDB in guest memory */ - if (IS_TE_ENABLED(vcpu) && - !(current->thread.per_flags & PER_FLAG_NO_TE) && - IS_ITDB_VALID(vcpu)) { - copy_to_guest(vcpu, TDB_ADDR, vcpu->arch.sie_block->itdba, - sizeof(struct kvm_s390_itdb)); - memset((void *) vcpu->arch.sie_block->itdba, 0, - sizeof(struct kvm_s390_itdb)); + if (guestdbg_enabled(vcpu) && per_event(vcpu)) { + kvm_s390_handle_per_event(vcpu); + /* the interrupt might have been filtered out completely */ + if (vcpu->arch.sie_block->iprcc == 0) + return 0; } trace_kvm_s390_intercept_prog(vcpu, vcpu->arch.sie_block->iprcc); - return kvm_s390_inject_program_int(vcpu, vcpu->arch.sie_block->iprcc); + if (vcpu->arch.sie_block->iprcc == PGM_SPECIFICATION) { + rc = read_guest_lc(vcpu, __LC_PGM_NEW_PSW, &psw, sizeof(psw_t)); + if (rc) + return rc; + /* Avoid endless loops of specification exceptions */ + if (!is_valid_psw(&psw)) + return -EOPNOTSUPP; + } + rc = handle_itdb(vcpu); + if (rc) + return rc; + + __extract_prog_irq(vcpu, &pgm_info); + return kvm_s390_inject_prog_irq(vcpu, &pgm_info); } static int handle_instruction_and_prog(struct kvm_vcpu *vcpu) @@ -142,17 +239,110 @@ static int handle_instruction_and_prog(struct kvm_vcpu *vcpu) return rc2; } +/** + * handle_external_interrupt - used for external interruption interceptions + * + * This interception only occurs if the CPUSTAT_EXT_INT bit was set, or if + * the new PSW does not have external interrupts disabled. In the first case, + * we've got to deliver the interrupt manually, and in the second case, we + * drop to userspace to handle the situation there. + */ +static int handle_external_interrupt(struct kvm_vcpu *vcpu) +{ + u16 eic = vcpu->arch.sie_block->eic; + struct kvm_s390_interrupt irq; + psw_t newpsw; + int rc; + + vcpu->stat.exit_external_interrupt++; + + rc = read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &newpsw, sizeof(psw_t)); + if (rc) + return rc; + /* We can not handle clock comparator or timer interrupt with bad PSW */ + if ((eic == EXT_IRQ_CLK_COMP || eic == EXT_IRQ_CPU_TIMER) && + (newpsw.mask & PSW_MASK_EXT)) + return -EOPNOTSUPP; + + switch (eic) { + case EXT_IRQ_CLK_COMP: + irq.type = KVM_S390_INT_CLOCK_COMP; + break; + case EXT_IRQ_CPU_TIMER: + irq.type = KVM_S390_INT_CPU_TIMER; + break; + case EXT_IRQ_EXTERNAL_CALL: + if (kvm_s390_si_ext_call_pending(vcpu)) + return 0; + irq.type = KVM_S390_INT_EXTERNAL_CALL; + irq.parm = vcpu->arch.sie_block->extcpuaddr; + break; + default: + return -EOPNOTSUPP; + } + + return kvm_s390_inject_vcpu(vcpu, &irq); +} + +/** + * Handle MOVE PAGE partial execution interception. + * + * This interception can only happen for guests with DAT disabled and + * addresses that are currently not mapped in the host. Thus we try to + * set up the mappings for the corresponding user pages here (or throw + * addressing exceptions in case of illegal guest addresses). + */ +static int handle_mvpg_pei(struct kvm_vcpu *vcpu) +{ + psw_t *psw = &vcpu->arch.sie_block->gpsw; + unsigned long srcaddr, dstaddr; + int reg1, reg2, rc; + + kvm_s390_get_regs_rre(vcpu, ®1, ®2); + + /* Make sure that the source is paged-in */ + srcaddr = kvm_s390_real_to_abs(vcpu, vcpu->run->s.regs.gprs[reg2]); + if (kvm_is_error_gpa(vcpu->kvm, srcaddr)) + return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = kvm_arch_fault_in_page(vcpu, srcaddr, 0); + if (rc != 0) + return rc; + + /* Make sure that the destination is paged-in */ + dstaddr = kvm_s390_real_to_abs(vcpu, vcpu->run->s.regs.gprs[reg1]); + if (kvm_is_error_gpa(vcpu->kvm, dstaddr)) + return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = kvm_arch_fault_in_page(vcpu, dstaddr, 1); + if (rc != 0) + return rc; + + psw->addr = __rewind_psw(*psw, 4); + + return 0; +} + +static int handle_partial_execution(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.sie_block->ipa == 0xb254) /* MVPG */ + return handle_mvpg_pei(vcpu); + if (vcpu->arch.sie_block->ipa >> 8 == 0xae) /* SIGP */ + return kvm_s390_handle_sigp_pei(vcpu); + + return -EOPNOTSUPP; +} + static const intercept_handler_t intercept_funcs[] = { [0x00 >> 2] = handle_noop, [0x04 >> 2] = handle_instruction, [0x08 >> 2] = handle_prog, [0x0C >> 2] = handle_instruction_and_prog, [0x10 >> 2] = handle_noop, - [0x14 >> 2] = handle_noop, + [0x14 >> 2] = handle_external_interrupt, [0x18 >> 2] = handle_noop, [0x1C >> 2] = kvm_s390_handle_wait, [0x20 >> 2] = handle_validity, [0x28 >> 2] = handle_stop, + [0x38 >> 2] = handle_partial_execution, }; int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu) diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 200a8f9390b6..90c8de22a2a0 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -27,6 +27,8 @@ #define IOINT_CSSID_MASK 0x03fc0000 #define IOINT_AI_MASK 0x04000000 +static void deliver_ckc_interrupt(struct kvm_vcpu *vcpu); + static int is_ioint(u64 type) { return ((type & 0xfffe0000u) != 0xfffe0000u); @@ -56,6 +58,17 @@ static int psw_interrupts_disabled(struct kvm_vcpu *vcpu) return 1; } +static int ckc_interrupts_enabled(struct kvm_vcpu *vcpu) +{ + if (psw_extint_disabled(vcpu) || + !(vcpu->arch.sie_block->gcr[0] & 0x800ul)) + return 0; + if (guestdbg_enabled(vcpu) && guestdbg_sstep_enabled(vcpu)) + /* No timer interrupts when single stepping */ + return 0; + return 1; +} + static u64 int_word_to_isc_bits(u32 int_word) { u8 isc = (int_word & 0x38000000) >> 27; @@ -78,6 +91,14 @@ static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu, if (vcpu->arch.sie_block->gcr[0] & 0x4000ul) return 1; return 0; + case KVM_S390_INT_CLOCK_COMP: + return ckc_interrupts_enabled(vcpu); + case KVM_S390_INT_CPU_TIMER: + if (psw_extint_disabled(vcpu)) + return 0; + if (vcpu->arch.sie_block->gcr[0] & 0x400ul) + return 1; + return 0; case KVM_S390_INT_SERVICE: case KVM_S390_INT_PFAULT_INIT: case KVM_S390_INT_PFAULT_DONE: @@ -127,11 +148,16 @@ static void __unset_cpu_idle(struct kvm_vcpu *vcpu) static void __reset_intercept_indicators(struct kvm_vcpu *vcpu) { - atomic_clear_mask(CPUSTAT_ECALL_PEND | - CPUSTAT_IO_INT | CPUSTAT_EXT_INT | CPUSTAT_STOP_INT, - &vcpu->arch.sie_block->cpuflags); + atomic_clear_mask(CPUSTAT_IO_INT | CPUSTAT_EXT_INT | CPUSTAT_STOP_INT, + &vcpu->arch.sie_block->cpuflags); vcpu->arch.sie_block->lctl = 0x0000; - vcpu->arch.sie_block->ictl &= ~ICTL_LPSW; + vcpu->arch.sie_block->ictl &= ~(ICTL_LPSW | ICTL_STCTL | ICTL_PINT); + + if (guestdbg_enabled(vcpu)) { + vcpu->arch.sie_block->lctl |= (LCTL_CR0 | LCTL_CR9 | + LCTL_CR10 | LCTL_CR11); + vcpu->arch.sie_block->ictl |= (ICTL_STCTL | ICTL_PINT); + } } static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag) @@ -149,6 +175,8 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu, case KVM_S390_INT_PFAULT_INIT: case KVM_S390_INT_PFAULT_DONE: case KVM_S390_INT_VIRTIO: + case KVM_S390_INT_CLOCK_COMP: + case KVM_S390_INT_CPU_TIMER: if (psw_extint_disabled(vcpu)) __set_cpuflag(vcpu, CPUSTAT_EXT_INT); else @@ -174,6 +202,106 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu, } } +static int __deliver_prog_irq(struct kvm_vcpu *vcpu, + struct kvm_s390_pgm_info *pgm_info) +{ + const unsigned short table[] = { 2, 4, 4, 6 }; + int rc = 0; + + switch (pgm_info->code & ~PGM_PER) { + case PGM_AFX_TRANSLATION: + case PGM_ASX_TRANSLATION: + case PGM_EX_TRANSLATION: + case PGM_LFX_TRANSLATION: + case PGM_LSTE_SEQUENCE: + case PGM_LSX_TRANSLATION: + case PGM_LX_TRANSLATION: + case PGM_PRIMARY_AUTHORITY: + case PGM_SECONDARY_AUTHORITY: + case PGM_SPACE_SWITCH: + rc = put_guest_lc(vcpu, pgm_info->trans_exc_code, + (u64 *)__LC_TRANS_EXC_CODE); + break; + case PGM_ALEN_TRANSLATION: + case PGM_ALE_SEQUENCE: + case PGM_ASTE_INSTANCE: + case PGM_ASTE_SEQUENCE: + case PGM_ASTE_VALIDITY: + case PGM_EXTENDED_AUTHORITY: + rc = put_guest_lc(vcpu, pgm_info->exc_access_id, + (u8 *)__LC_EXC_ACCESS_ID); + break; + case PGM_ASCE_TYPE: + case PGM_PAGE_TRANSLATION: + case PGM_REGION_FIRST_TRANS: + case PGM_REGION_SECOND_TRANS: + case PGM_REGION_THIRD_TRANS: + case PGM_SEGMENT_TRANSLATION: + rc = put_guest_lc(vcpu, pgm_info->trans_exc_code, + (u64 *)__LC_TRANS_EXC_CODE); + rc |= put_guest_lc(vcpu, pgm_info->exc_access_id, + (u8 *)__LC_EXC_ACCESS_ID); + rc |= put_guest_lc(vcpu, pgm_info->op_access_id, + (u8 *)__LC_OP_ACCESS_ID); + break; + case PGM_MONITOR: + rc = put_guest_lc(vcpu, pgm_info->mon_class_nr, + (u64 *)__LC_MON_CLASS_NR); + rc |= put_guest_lc(vcpu, pgm_info->mon_code, + (u64 *)__LC_MON_CODE); + break; + case PGM_DATA: + rc = put_guest_lc(vcpu, pgm_info->data_exc_code, + (u32 *)__LC_DATA_EXC_CODE); + break; + case PGM_PROTECTION: + rc = put_guest_lc(vcpu, pgm_info->trans_exc_code, + (u64 *)__LC_TRANS_EXC_CODE); + rc |= put_guest_lc(vcpu, pgm_info->exc_access_id, + (u8 *)__LC_EXC_ACCESS_ID); + break; + } + + if (pgm_info->code & PGM_PER) { + rc |= put_guest_lc(vcpu, pgm_info->per_code, + (u8 *) __LC_PER_CODE); + rc |= put_guest_lc(vcpu, pgm_info->per_atmid, + (u8 *)__LC_PER_ATMID); + rc |= put_guest_lc(vcpu, pgm_info->per_address, + (u64 *) __LC_PER_ADDRESS); + rc |= put_guest_lc(vcpu, pgm_info->per_access_id, + (u8 *) __LC_PER_ACCESS_ID); + } + + switch (vcpu->arch.sie_block->icptcode) { + case ICPT_INST: + case ICPT_INSTPROGI: + case ICPT_OPEREXC: + case ICPT_PARTEXEC: + case ICPT_IOINST: + /* last instruction only stored for these icptcodes */ + rc |= put_guest_lc(vcpu, table[vcpu->arch.sie_block->ipa >> 14], + (u16 *) __LC_PGM_ILC); + break; + case ICPT_PROGI: + rc |= put_guest_lc(vcpu, vcpu->arch.sie_block->pgmilc, + (u16 *) __LC_PGM_ILC); + break; + default: + rc |= put_guest_lc(vcpu, 0, + (u16 *) __LC_PGM_ILC); + } + + rc |= put_guest_lc(vcpu, pgm_info->code, + (u16 *)__LC_PGM_INT_CODE); + rc |= write_guest_lc(vcpu, __LC_PGM_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_PGM_NEW_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + + return rc; +} + static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, struct kvm_s390_interrupt_info *inti) { @@ -186,26 +314,46 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, vcpu->stat.deliver_emergency_signal++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, inti->emerg.code, 0); - rc = put_guest(vcpu, 0x1201, (u16 __user *)__LC_EXT_INT_CODE); - rc |= put_guest(vcpu, inti->emerg.code, - (u16 __user *)__LC_EXT_CPU_ADDR); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x1201, (u16 *)__LC_EXT_INT_CODE); + rc |= put_guest_lc(vcpu, inti->emerg.code, + (u16 *)__LC_EXT_CPU_ADDR); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); break; case KVM_S390_INT_EXTERNAL_CALL: VCPU_EVENT(vcpu, 4, "%s", "interrupt: sigp ext call"); vcpu->stat.deliver_external_call++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, inti->extcall.code, 0); - rc = put_guest(vcpu, 0x1202, (u16 __user *)__LC_EXT_INT_CODE); - rc |= put_guest(vcpu, inti->extcall.code, - (u16 __user *)__LC_EXT_CPU_ADDR); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x1202, (u16 *)__LC_EXT_INT_CODE); + rc |= put_guest_lc(vcpu, inti->extcall.code, + (u16 *)__LC_EXT_CPU_ADDR); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + break; + case KVM_S390_INT_CLOCK_COMP: + trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, + inti->ext.ext_params, 0); + deliver_ckc_interrupt(vcpu); + break; + case KVM_S390_INT_CPU_TIMER: + trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, + inti->ext.ext_params, 0); + rc = put_guest_lc(vcpu, EXT_IRQ_CPU_TIMER, + (u16 *)__LC_EXT_INT_CODE); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); + rc |= put_guest_lc(vcpu, inti->ext.ext_params, + (u32 *)__LC_EXT_PARAMS); break; case KVM_S390_INT_SERVICE: VCPU_EVENT(vcpu, 4, "interrupt: sclp parm:%x", @@ -213,37 +361,39 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, vcpu->stat.deliver_service_signal++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, inti->ext.ext_params, 0); - rc = put_guest(vcpu, 0x2401, (u16 __user *)__LC_EXT_INT_CODE); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x2401, (u16 *)__LC_EXT_INT_CODE); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); - rc |= put_guest(vcpu, inti->ext.ext_params, - (u32 __user *)__LC_EXT_PARAMS); + rc |= put_guest_lc(vcpu, inti->ext.ext_params, + (u32 *)__LC_EXT_PARAMS); break; case KVM_S390_INT_PFAULT_INIT: trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, 0, inti->ext.ext_params2); - rc = put_guest(vcpu, 0x2603, (u16 __user *) __LC_EXT_INT_CODE); - rc |= put_guest(vcpu, 0x0600, (u16 __user *) __LC_EXT_CPU_ADDR); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x2603, (u16 *) __LC_EXT_INT_CODE); + rc |= put_guest_lc(vcpu, 0x0600, (u16 *) __LC_EXT_CPU_ADDR); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); - rc |= put_guest(vcpu, inti->ext.ext_params2, - (u64 __user *) __LC_EXT_PARAMS2); + rc |= put_guest_lc(vcpu, inti->ext.ext_params2, + (u64 *) __LC_EXT_PARAMS2); break; case KVM_S390_INT_PFAULT_DONE: trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, 0, inti->ext.ext_params2); - rc = put_guest(vcpu, 0x2603, (u16 __user *) __LC_EXT_INT_CODE); - rc |= put_guest(vcpu, 0x0680, (u16 __user *) __LC_EXT_CPU_ADDR); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x2603, (u16 *)__LC_EXT_INT_CODE); + rc |= put_guest_lc(vcpu, 0x0680, (u16 *)__LC_EXT_CPU_ADDR); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); - rc |= put_guest(vcpu, inti->ext.ext_params2, - (u64 __user *) __LC_EXT_PARAMS2); + rc |= put_guest_lc(vcpu, inti->ext.ext_params2, + (u64 *)__LC_EXT_PARAMS2); break; case KVM_S390_INT_VIRTIO: VCPU_EVENT(vcpu, 4, "interrupt: virtio parm:%x,parm64:%llx", @@ -252,16 +402,17 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, inti->ext.ext_params, inti->ext.ext_params2); - rc = put_guest(vcpu, 0x2603, (u16 __user *)__LC_EXT_INT_CODE); - rc |= put_guest(vcpu, 0x0d00, (u16 __user *)__LC_EXT_CPU_ADDR); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, + rc = put_guest_lc(vcpu, 0x2603, (u16 *)__LC_EXT_INT_CODE); + rc |= put_guest_lc(vcpu, 0x0d00, (u16 *)__LC_EXT_CPU_ADDR); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); - rc |= put_guest(vcpu, inti->ext.ext_params, - (u32 __user *)__LC_EXT_PARAMS); - rc |= put_guest(vcpu, inti->ext.ext_params2, - (u64 __user *)__LC_EXT_PARAMS2); + rc |= put_guest_lc(vcpu, inti->ext.ext_params, + (u32 *)__LC_EXT_PARAMS); + rc |= put_guest_lc(vcpu, inti->ext.ext_params2, + (u64 *)__LC_EXT_PARAMS2); break; case KVM_S390_SIGP_STOP: VCPU_EVENT(vcpu, 4, "%s", "interrupt: cpu stop"); @@ -285,13 +436,12 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, vcpu->stat.deliver_restart_signal++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, 0, 0); - rc = copy_to_guest(vcpu, - offsetof(struct _lowcore, restart_old_psw), - &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - offsetof(struct _lowcore, restart_psw), - sizeof(psw_t)); - atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + rc = write_guest_lc(vcpu, + offsetof(struct _lowcore, restart_old_psw), + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + rc |= read_guest_lc(vcpu, offsetof(struct _lowcore, restart_psw), + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); break; case KVM_S390_PROGRAM_INT: VCPU_EVENT(vcpu, 4, "interrupt: pgm check code:%x, ilc:%x", @@ -300,13 +450,7 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, vcpu->stat.deliver_program_int++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, inti->pgm.code, 0); - rc = put_guest(vcpu, inti->pgm.code, (u16 __user *)__LC_PGM_INT_CODE); - rc |= put_guest(vcpu, table[vcpu->arch.sie_block->ipa >> 14], - (u16 __user *)__LC_PGM_ILC); - rc |= copy_to_guest(vcpu, __LC_PGM_OLD_PSW, - &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_PGM_NEW_PSW, sizeof(psw_t)); + rc = __deliver_prog_irq(vcpu, &inti->pgm); break; case KVM_S390_MCHK: @@ -317,11 +461,12 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, inti->mchk.mcic); rc = kvm_s390_vcpu_store_status(vcpu, KVM_S390_STORE_STATUS_PREFIXED); - rc |= put_guest(vcpu, inti->mchk.mcic, (u64 __user *) __LC_MCCK_CODE); - rc |= copy_to_guest(vcpu, __LC_MCK_OLD_PSW, + rc |= put_guest_lc(vcpu, inti->mchk.mcic, (u64 *)__LC_MCCK_CODE); + rc |= write_guest_lc(vcpu, __LC_MCK_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_MCK_NEW_PSW, &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_MCK_NEW_PSW, sizeof(psw_t)); break; case KVM_S390_INT_IO_MIN...KVM_S390_INT_IO_MAX: @@ -334,18 +479,20 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, vcpu->stat.deliver_io_int++; trace_kvm_s390_deliver_interrupt(vcpu->vcpu_id, inti->type, param0, param1); - rc = put_guest(vcpu, inti->io.subchannel_id, - (u16 __user *) __LC_SUBCHANNEL_ID); - rc |= put_guest(vcpu, inti->io.subchannel_nr, - (u16 __user *) __LC_SUBCHANNEL_NR); - rc |= put_guest(vcpu, inti->io.io_int_parm, - (u32 __user *) __LC_IO_INT_PARM); - rc |= put_guest(vcpu, inti->io.io_int_word, - (u32 __user *) __LC_IO_INT_WORD); - rc |= copy_to_guest(vcpu, __LC_IO_OLD_PSW, - &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_IO_NEW_PSW, sizeof(psw_t)); + rc = put_guest_lc(vcpu, inti->io.subchannel_id, + (u16 *)__LC_SUBCHANNEL_ID); + rc |= put_guest_lc(vcpu, inti->io.subchannel_nr, + (u16 *)__LC_SUBCHANNEL_NR); + rc |= put_guest_lc(vcpu, inti->io.io_int_parm, + (u32 *)__LC_IO_INT_PARM); + rc |= put_guest_lc(vcpu, inti->io.io_int_word, + (u32 *)__LC_IO_INT_WORD); + rc |= write_guest_lc(vcpu, __LC_IO_OLD_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_IO_NEW_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); break; } default: @@ -358,25 +505,35 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, } } -static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu) +static void deliver_ckc_interrupt(struct kvm_vcpu *vcpu) { int rc; - if (psw_extint_disabled(vcpu)) - return 0; - if (!(vcpu->arch.sie_block->gcr[0] & 0x800ul)) - return 0; - rc = put_guest(vcpu, 0x1004, (u16 __user *)__LC_EXT_INT_CODE); - rc |= copy_to_guest(vcpu, __LC_EXT_OLD_PSW, - &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); - rc |= copy_from_guest(vcpu, &vcpu->arch.sie_block->gpsw, - __LC_EXT_NEW_PSW, sizeof(psw_t)); + rc = put_guest_lc(vcpu, 0x1004, (u16 __user *)__LC_EXT_INT_CODE); + rc |= write_guest_lc(vcpu, __LC_EXT_OLD_PSW, + &vcpu->arch.sie_block->gpsw, sizeof(psw_t)); + rc |= read_guest_lc(vcpu, __LC_EXT_NEW_PSW, + &vcpu->arch.sie_block->gpsw, + sizeof(psw_t)); if (rc) { printk("kvm: The guest lowcore is not mapped during interrupt " "delivery, killing userspace\n"); do_exit(SIGKILL); } - return 1; +} + +/* Check whether SIGP interpretation facility has an external call pending */ +int kvm_s390_si_ext_call_pending(struct kvm_vcpu *vcpu) +{ + atomic_t *sigp_ctrl = &vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].ctrl; + + if (!psw_extint_disabled(vcpu) && + (vcpu->arch.sie_block->gcr[0] & 0x2000ul) && + (atomic_read(sigp_ctrl) & SIGP_CTRL_C) && + (atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_ECALL_PEND)) + return 1; + + return 0; } int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) @@ -406,19 +563,23 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu) spin_unlock(&fi->lock); } - if ((!rc) && (vcpu->arch.sie_block->ckc < - get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) { - if ((!psw_extint_disabled(vcpu)) && - (vcpu->arch.sie_block->gcr[0] & 0x800ul)) - rc = 1; - } + if (!rc && kvm_cpu_has_pending_timer(vcpu)) + rc = 1; + + if (!rc && kvm_s390_si_ext_call_pending(vcpu)) + rc = 1; return rc; } int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { - return 0; + if (!(vcpu->arch.sie_block->ckc < + get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) + return 0; + if (!ckc_interrupts_enabled(vcpu)) + return 0; + return 1; } int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) @@ -441,8 +602,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) return -EOPNOTSUPP; /* disabled wait */ } - if (psw_extint_disabled(vcpu) || - (!(vcpu->arch.sie_block->gcr[0] & 0x800ul))) { + if (!ckc_interrupts_enabled(vcpu)) { VCPU_EVENT(vcpu, 3, "%s", "enabled wait w/o timer"); goto no_timer; } @@ -465,7 +625,8 @@ no_timer: while (list_empty(&vcpu->arch.local_int.list) && list_empty(&vcpu->arch.local_int.float_int->list) && (!vcpu->arch.local_int.timer_due) && - !signal_pending(current)) { + !signal_pending(current) && + !kvm_s390_si_ext_call_pending(vcpu)) { set_current_state(TASK_INTERRUPTIBLE); spin_unlock_bh(&vcpu->arch.local_int.lock); spin_unlock(&vcpu->arch.local_int.float_int->lock); @@ -522,6 +683,11 @@ void kvm_s390_clear_local_irqs(struct kvm_vcpu *vcpu) } atomic_set(&li->active, 0); spin_unlock_bh(&li->lock); + + /* clear pending external calls set by sigp interpretation facility */ + atomic_clear_mask(CPUSTAT_ECALL_PEND, &vcpu->arch.sie_block->cpuflags); + atomic_clear_mask(SIGP_CTRL_C, + &vcpu->kvm->arch.sca->cpu[vcpu->vcpu_id].ctrl); } void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) @@ -554,9 +720,8 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu) } while (deliver); } - if ((vcpu->arch.sie_block->ckc < - get_tod_clock_fast() + vcpu->arch.sie_block->epoch)) - __try_deliver_ckc_interrupt(vcpu); + if (kvm_cpu_has_pending_timer(vcpu)) + deliver_ckc_interrupt(vcpu); if (atomic_read(&fi->active)) { do { @@ -660,6 +825,31 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code) return 0; } +int kvm_s390_inject_prog_irq(struct kvm_vcpu *vcpu, + struct kvm_s390_pgm_info *pgm_info) +{ + struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int; + struct kvm_s390_interrupt_info *inti; + + inti = kzalloc(sizeof(*inti), GFP_KERNEL); + if (!inti) + return -ENOMEM; + + VCPU_EVENT(vcpu, 3, "inject: prog irq %d (from kernel)", + pgm_info->code); + trace_kvm_s390_inject_vcpu(vcpu->vcpu_id, KVM_S390_PROGRAM_INT, + pgm_info->code, 0, 1); + + inti->type = KVM_S390_PROGRAM_INT; + memcpy(&inti->pgm, pgm_info, sizeof(inti->pgm)); + spin_lock_bh(&li->lock); + list_add(&inti->list, &li->list); + atomic_set(&li->active, 1); + BUG_ON(waitqueue_active(li->wq)); + spin_unlock_bh(&li->lock); + return 0; +} + struct kvm_s390_interrupt_info *kvm_s390_get_io_int(struct kvm *kvm, u64 cr6, u64 schid) { @@ -810,6 +1000,12 @@ int kvm_s390_inject_vm(struct kvm *kvm, return __inject_vm(kvm, inti); } +void kvm_s390_reinject_io_int(struct kvm *kvm, + struct kvm_s390_interrupt_info *inti) +{ + __inject_vm(kvm, inti); +} + int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, struct kvm_s390_interrupt *s390int) { @@ -839,6 +1035,8 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, break; case KVM_S390_SIGP_STOP: case KVM_S390_RESTART: + case KVM_S390_INT_CLOCK_COMP: + case KVM_S390_INT_CPU_TIMER: VCPU_EVENT(vcpu, 3, "inject: type %x", s390int->type); inti->type = s390int->type; break; @@ -900,7 +1098,7 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, return 0; } -static void clear_floating_interrupts(struct kvm *kvm) +void kvm_s390_clear_float_irqs(struct kvm *kvm) { struct kvm_s390_float_interrupt *fi; struct kvm_s390_interrupt_info *n, *inti = NULL; @@ -1246,7 +1444,7 @@ static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr) break; case KVM_DEV_FLIC_CLEAR_IRQS: r = 0; - clear_floating_interrupts(dev->kvm); + kvm_s390_clear_float_irqs(dev->kvm); break; case KVM_DEV_FLIC_APF_ENABLE: dev->kvm->arch.gmap->pfault_enabled = 1; diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index b3ecb8f5b6ce..2f3e14fe91a4 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -11,6 +11,7 @@ * Christian Borntraeger <borntraeger@de.ibm.com> * Heiko Carstens <heiko.carstens@de.ibm.com> * Christian Ehrhardt <ehrhardt@de.ibm.com> + * Jason J. Herne <jjherne@us.ibm.com> */ #include <linux/compiler.h> @@ -51,6 +52,8 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) }, { "instruction_lctlg", VCPU_STAT(instruction_lctlg) }, { "instruction_lctl", VCPU_STAT(instruction_lctl) }, + { "instruction_stctl", VCPU_STAT(instruction_stctl) }, + { "instruction_stctg", VCPU_STAT(instruction_stctg) }, { "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) }, { "deliver_external_call", VCPU_STAT(deliver_external_call) }, { "deliver_service_signal", VCPU_STAT(deliver_service_signal) }, @@ -66,6 +69,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "instruction_stpx", VCPU_STAT(instruction_stpx) }, { "instruction_stap", VCPU_STAT(instruction_stap) }, { "instruction_storage_key", VCPU_STAT(instruction_storage_key) }, + { "instruction_ipte_interlock", VCPU_STAT(instruction_ipte_interlock) }, { "instruction_stsch", VCPU_STAT(instruction_stsch) }, { "instruction_chsc", VCPU_STAT(instruction_chsc) }, { "instruction_essa", VCPU_STAT(instruction_essa) }, @@ -90,7 +94,7 @@ unsigned long *vfacilities; static struct gmap_notifier gmap_notifier; /* test availability of vfacility */ -static inline int test_vfacility(unsigned long nr) +int test_vfacility(unsigned long nr) { return __test_facility(nr, (void *) vfacilities); } @@ -158,9 +162,11 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_ONE_REG: case KVM_CAP_ENABLE_CAP: case KVM_CAP_S390_CSS_SUPPORT: + case KVM_CAP_IRQFD: case KVM_CAP_IOEVENTFD: case KVM_CAP_DEVICE_CTRL: case KVM_CAP_ENABLE_CAP_VM: + case KVM_CAP_VM_ATTRIBUTES: r = 1; break; case KVM_CAP_NR_VCPUS: @@ -179,6 +185,25 @@ int kvm_dev_ioctl_check_extension(long ext) return r; } +static void kvm_s390_sync_dirty_log(struct kvm *kvm, + struct kvm_memory_slot *memslot) +{ + gfn_t cur_gfn, last_gfn; + unsigned long address; + struct gmap *gmap = kvm->arch.gmap; + + down_read(&gmap->mm->mmap_sem); + /* Loop over all guest pages */ + last_gfn = memslot->base_gfn + memslot->npages; + for (cur_gfn = memslot->base_gfn; cur_gfn <= last_gfn; cur_gfn++) { + address = gfn_to_hva_memslot(memslot, cur_gfn); + + if (gmap_test_and_clear_dirty(address, gmap)) + mark_page_dirty(kvm, cur_gfn); + } + up_read(&gmap->mm->mmap_sem); +} + /* Section: vm related */ /* * Get (and clear) the dirty memory log for a memory slot. @@ -186,7 +211,36 @@ int kvm_dev_ioctl_check_extension(long ext) int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) { - return 0; + int r; + unsigned long n; + struct kvm_memory_slot *memslot; + int is_dirty = 0; + + mutex_lock(&kvm->slots_lock); + + r = -EINVAL; + if (log->slot >= KVM_USER_MEM_SLOTS) + goto out; + + memslot = id_to_memslot(kvm->memslots, log->slot); + r = -ENOENT; + if (!memslot->dirty_bitmap) + goto out; + + kvm_s390_sync_dirty_log(kvm, memslot); + r = kvm_get_dirty_log(kvm, log, &is_dirty); + if (r) + goto out; + + /* Clear the dirty log */ + if (is_dirty) { + n = kvm_dirty_bitmap_bytes(memslot); + memset(memslot->dirty_bitmap, 0, n); + } + r = 0; +out: + mutex_unlock(&kvm->slots_lock); + return r; } static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap) @@ -208,11 +262,86 @@ static int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap) return r; } +static int kvm_s390_mem_control(struct kvm *kvm, struct kvm_device_attr *attr) +{ + int ret; + unsigned int idx; + switch (attr->attr) { + case KVM_S390_VM_MEM_ENABLE_CMMA: + ret = -EBUSY; + mutex_lock(&kvm->lock); + if (atomic_read(&kvm->online_vcpus) == 0) { + kvm->arch.use_cmma = 1; + ret = 0; + } + mutex_unlock(&kvm->lock); + break; + case KVM_S390_VM_MEM_CLR_CMMA: + mutex_lock(&kvm->lock); + idx = srcu_read_lock(&kvm->srcu); + page_table_reset_pgste(kvm->arch.gmap->mm, 0, TASK_SIZE, false); + srcu_read_unlock(&kvm->srcu, idx); + mutex_unlock(&kvm->lock); + ret = 0; + break; + default: + ret = -ENXIO; + break; + } + return ret; +} + +static int kvm_s390_vm_set_attr(struct kvm *kvm, struct kvm_device_attr *attr) +{ + int ret; + + switch (attr->group) { + case KVM_S390_VM_MEM_CTRL: + ret = kvm_s390_mem_control(kvm, attr); + break; + default: + ret = -ENXIO; + break; + } + + return ret; +} + +static int kvm_s390_vm_get_attr(struct kvm *kvm, struct kvm_device_attr *attr) +{ + return -ENXIO; +} + +static int kvm_s390_vm_has_attr(struct kvm *kvm, struct kvm_device_attr *attr) +{ + int ret; + + switch (attr->group) { + case KVM_S390_VM_MEM_CTRL: + switch (attr->attr) { + case KVM_S390_VM_MEM_ENABLE_CMMA: + case KVM_S390_VM_MEM_CLR_CMMA: + ret = 0; + break; + default: + ret = -ENXIO; + break; + } + break; + default: + ret = -ENXIO; + break; + } + + return ret; +} + long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { struct kvm *kvm = filp->private_data; void __user *argp = (void __user *)arg; + struct kvm_device_attr attr; int r; switch (ioctl) { @@ -245,6 +374,27 @@ long kvm_arch_vm_ioctl(struct file *filp, } break; } + case KVM_SET_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, (void __user *)arg, sizeof(attr))) + break; + r = kvm_s390_vm_set_attr(kvm, &attr); + break; + } + case KVM_GET_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, (void __user *)arg, sizeof(attr))) + break; + r = kvm_s390_vm_get_attr(kvm, &attr); + break; + } + case KVM_HAS_DEVICE_ATTR: { + r = -EFAULT; + if (copy_from_user(&attr, (void __user *)arg, sizeof(attr))) + break; + r = kvm_s390_vm_has_attr(kvm, &attr); + break; + } default: r = -ENOTTY; } @@ -291,6 +441,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) spin_lock_init(&kvm->arch.float_int.lock); INIT_LIST_HEAD(&kvm->arch.float_int.list); + init_waitqueue_head(&kvm->arch.ipte_wq); debug_register_view(kvm->arch.dbf, &debug_sprintf_view); VM_EVENT(kvm, 3, "%s", "vm created"); @@ -308,6 +459,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) kvm->arch.css_support = 0; kvm->arch.use_irqchip = 0; + spin_lock_init(&kvm->arch.start_stop_lock); + return 0; out_nogmap: debug_unregister(kvm->arch.dbf); @@ -321,6 +474,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) { VCPU_EVENT(vcpu, 3, "%s", "free cpu"); trace_kvm_s390_destroy_vcpu(vcpu->vcpu_id); + kvm_s390_clear_local_irqs(vcpu); kvm_clear_async_pf_completion_queue(vcpu); if (!kvm_is_ucontrol(vcpu->kvm)) { clear_bit(63 - vcpu->vcpu_id, @@ -334,9 +488,8 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) if (kvm_is_ucontrol(vcpu->kvm)) gmap_free(vcpu->arch.gmap); - if (vcpu->arch.sie_block->cbrlo) - __free_page(__pfn_to_page( - vcpu->arch.sie_block->cbrlo >> PAGE_SHIFT)); + if (kvm_s390_cmma_enabled(vcpu->kvm)) + kvm_s390_vcpu_unsetup_cmma(vcpu); free_page((unsigned long)(vcpu->arch.sie_block)); kvm_vcpu_uninit(vcpu); @@ -371,6 +524,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) if (!kvm_is_ucontrol(kvm)) gmap_free(kvm->arch.gmap); kvm_s390_destroy_adapters(kvm); + kvm_s390_clear_float_irqs(kvm); } /* Section: vcpu related */ @@ -441,7 +595,7 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu) vcpu->arch.sie_block->pp = 0; vcpu->arch.pfault_token = KVM_S390_PFAULT_TOKEN_INVALID; kvm_clear_async_pf_completion_queue(vcpu); - atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + kvm_s390_vcpu_stop(vcpu); kvm_s390_clear_local_irqs(vcpu); } @@ -450,9 +604,26 @@ int kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu) return 0; } +void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu) +{ + free_page(vcpu->arch.sie_block->cbrlo); + vcpu->arch.sie_block->cbrlo = 0; +} + +int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu) +{ + vcpu->arch.sie_block->cbrlo = get_zeroed_page(GFP_KERNEL); + if (!vcpu->arch.sie_block->cbrlo) + return -ENOMEM; + + vcpu->arch.sie_block->ecb2 |= 0x80; + vcpu->arch.sie_block->ecb2 &= ~0x08; + return 0; +} + int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) { - struct page *cbrl; + int rc = 0; atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH | CPUSTAT_SM | @@ -463,15 +634,17 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) vcpu->arch.sie_block->ecb |= 0x10; vcpu->arch.sie_block->ecb2 = 8; - vcpu->arch.sie_block->eca = 0xC1002001U; + vcpu->arch.sie_block->eca = 0xD1002000U; + if (sclp_has_siif()) + vcpu->arch.sie_block->eca |= 1; vcpu->arch.sie_block->fac = (int) (long) vfacilities; - if (kvm_enabled_cmma()) { - cbrl = alloc_page(GFP_KERNEL | __GFP_ZERO); - if (cbrl) { - vcpu->arch.sie_block->ecb2 |= 0x80; - vcpu->arch.sie_block->ecb2 &= ~0x08; - vcpu->arch.sie_block->cbrlo = page_to_phys(cbrl); - } + vcpu->arch.sie_block->ictl |= ICTL_ISKE | ICTL_SSKE | ICTL_RRBE | + ICTL_TPROT; + + if (kvm_s390_cmma_enabled(vcpu->kvm)) { + rc = kvm_s390_vcpu_setup_cmma(vcpu); + if (rc) + return rc; } hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); tasklet_init(&vcpu->arch.tasklet, kvm_s390_tasklet, @@ -479,7 +652,7 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup; get_cpu_id(&vcpu->arch.cpu_id); vcpu->arch.cpu_id.version = 0xff; - return 0; + return rc; } struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, @@ -583,7 +756,7 @@ static void kvm_gmap_notifier(struct gmap *gmap, unsigned long address) kvm_for_each_vcpu(i, vcpu, kvm) { /* match against both prefix pages */ - if (vcpu->arch.sie_block->prefix == (address & ~0x1000UL)) { + if (kvm_s390_get_prefix(vcpu) == (address & ~0x1000UL)) { VCPU_EVENT(vcpu, 2, "gmap notifier for %lx", address); kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu); exit_sie_sync(vcpu); @@ -768,10 +941,40 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, return -EINVAL; /* not implemented yet */ } +#define VALID_GUESTDBG_FLAGS (KVM_GUESTDBG_SINGLESTEP | \ + KVM_GUESTDBG_USE_HW_BP | \ + KVM_GUESTDBG_ENABLE) + int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, struct kvm_guest_debug *dbg) { - return -EINVAL; /* not implemented yet */ + int rc = 0; + + vcpu->guest_debug = 0; + kvm_s390_clear_bp_data(vcpu); + + if (dbg->control & ~VALID_GUESTDBG_FLAGS) + return -EINVAL; + + if (dbg->control & KVM_GUESTDBG_ENABLE) { + vcpu->guest_debug = dbg->control; + /* enforce guest PER */ + atomic_set_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags); + + if (dbg->control & KVM_GUESTDBG_USE_HW_BP) + rc = kvm_s390_import_bp_data(vcpu, dbg); + } else { + atomic_clear_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags); + vcpu->arch.guestdbg.last_bp = 0; + } + + if (rc) { + vcpu->guest_debug = 0; + kvm_s390_clear_bp_data(vcpu); + atomic_clear_mask(CPUSTAT_P, &vcpu->arch.sie_block->cpuflags); + } + + return rc; } int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu, @@ -786,8 +989,27 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; /* not implemented yet */ } +bool kvm_s390_cmma_enabled(struct kvm *kvm) +{ + if (!MACHINE_IS_LPAR) + return false; + /* only enable for z10 and later */ + if (!MACHINE_HAS_EDAT1) + return false; + if (!kvm->arch.use_cmma) + return false; + return true; +} + +static bool ibs_enabled(struct kvm_vcpu *vcpu) +{ + return atomic_read(&vcpu->arch.sie_block->cpuflags) & CPUSTAT_IBS; +} + static int kvm_s390_handle_requests(struct kvm_vcpu *vcpu) { +retry: + s390_vcpu_unblock(vcpu); /* * We use MMU_RELOAD just to re-arm the ipte notifier for the * guest prefix page. gmap_ipte_notify will wait on the ptl lock. @@ -795,27 +1017,61 @@ static int kvm_s390_handle_requests(struct kvm_vcpu *vcpu) * already finished. We might race against a second unmapper that * wants to set the blocking bit. Lets just retry the request loop. */ - while (kvm_check_request(KVM_REQ_MMU_RELOAD, vcpu)) { + if (kvm_check_request(KVM_REQ_MMU_RELOAD, vcpu)) { int rc; rc = gmap_ipte_notify(vcpu->arch.gmap, - vcpu->arch.sie_block->prefix, + kvm_s390_get_prefix(vcpu), PAGE_SIZE * 2); if (rc) return rc; - s390_vcpu_unblock(vcpu); + goto retry; + } + + if (kvm_check_request(KVM_REQ_ENABLE_IBS, vcpu)) { + if (!ibs_enabled(vcpu)) { + trace_kvm_s390_enable_disable_ibs(vcpu->vcpu_id, 1); + atomic_set_mask(CPUSTAT_IBS, + &vcpu->arch.sie_block->cpuflags); + } + goto retry; } + + if (kvm_check_request(KVM_REQ_DISABLE_IBS, vcpu)) { + if (ibs_enabled(vcpu)) { + trace_kvm_s390_enable_disable_ibs(vcpu->vcpu_id, 0); + atomic_clear_mask(CPUSTAT_IBS, + &vcpu->arch.sie_block->cpuflags); + } + goto retry; + } + return 0; } -static long kvm_arch_fault_in_sync(struct kvm_vcpu *vcpu) +/** + * kvm_arch_fault_in_page - fault-in guest page if necessary + * @vcpu: The corresponding virtual cpu + * @gpa: Guest physical address + * @writable: Whether the page should be writable or not + * + * Make sure that a guest page has been faulted-in on the host. + * + * Return: Zero on success, negative error code otherwise. + */ +long kvm_arch_fault_in_page(struct kvm_vcpu *vcpu, gpa_t gpa, int writable) { - long rc; - hva_t fault = gmap_fault(current->thread.gmap_addr, vcpu->arch.gmap); struct mm_struct *mm = current->mm; + hva_t hva; + long rc; + + hva = gmap_fault(gpa, vcpu->arch.gmap); + if (IS_ERR_VALUE(hva)) + return (long)hva; down_read(&mm->mmap_sem); - rc = get_user_pages(current, mm, fault, 1, 1, 0, NULL, NULL); + rc = get_user_pages(current, mm, hva, 1, writable, 0, NULL, NULL); up_read(&mm->mmap_sem); - return rc; + + return rc < 0 ? rc : 0; } static void __kvm_inject_pfault_token(struct kvm_vcpu *vcpu, bool start_token, @@ -882,8 +1138,9 @@ static int kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu) if (!vcpu->arch.gmap->pfault_enabled) return 0; - hva = gmap_fault(current->thread.gmap_addr, vcpu->arch.gmap); - if (copy_from_guest(vcpu, &arch.pfault_token, vcpu->arch.pfault_token, 8)) + hva = gfn_to_hva(vcpu->kvm, gpa_to_gfn(current->thread.gmap_addr)); + hva += current->thread.gmap_addr & ~PAGE_MASK; + if (read_guest_real(vcpu, vcpu->arch.pfault_token, &arch.pfault_token, 8)) return 0; rc = kvm_setup_async_pf(vcpu, current->thread.gmap_addr, hva, &arch); @@ -906,7 +1163,7 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu) if (need_resched()) schedule(); - if (test_thread_flag(TIF_MCCK_PENDING)) + if (test_cpu_flag(CIF_MCCK_PENDING)) s390_handle_mcck(); if (!kvm_is_ucontrol(vcpu->kvm)) @@ -916,6 +1173,11 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu) if (rc) return rc; + if (guestdbg_enabled(vcpu)) { + kvm_s390_backup_guest_per_regs(vcpu); + kvm_s390_patch_guest_per_regs(vcpu); + } + vcpu->arch.sie_block->icptcode = 0; cpuflags = atomic_read(&vcpu->arch.sie_block->cpuflags); VCPU_EVENT(vcpu, 6, "entering sie flags %x", cpuflags); @@ -932,6 +1194,9 @@ static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason) vcpu->arch.sie_block->icptcode); trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode); + if (guestdbg_enabled(vcpu)) + kvm_s390_restore_guest_per_regs(vcpu); + if (exit_reason >= 0) { rc = 0; } else if (kvm_is_ucontrol(vcpu->kvm)) { @@ -944,9 +1209,12 @@ static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason) } else if (current->thread.gmap_pfault) { trace_kvm_s390_major_guest_pfault(vcpu); current->thread.gmap_pfault = 0; - if (kvm_arch_setup_async_pf(vcpu) || - (kvm_arch_fault_in_sync(vcpu) >= 0)) + if (kvm_arch_setup_async_pf(vcpu)) { rc = 0; + } else { + gpa_t gpa = current->thread.gmap_addr; + rc = kvm_arch_fault_in_page(vcpu, gpa, 1); + } } if (rc == -1) { @@ -968,16 +1236,6 @@ static int vcpu_post_run(struct kvm_vcpu *vcpu, int exit_reason) return rc; } -bool kvm_enabled_cmma(void) -{ - if (!MACHINE_IS_LPAR) - return false; - /* only enable for z10 and later */ - if (!MACHINE_HAS_EDAT1) - return false; - return true; -} - static int __vcpu_run(struct kvm_vcpu *vcpu) { int rc, exit_reason; @@ -1007,7 +1265,7 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu); rc = vcpu_post_run(vcpu, exit_reason); - } while (!signal_pending(current) && !rc); + } while (!signal_pending(current) && !guestdbg_exit_pending(vcpu) && !rc); srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx); return rc; @@ -1018,10 +1276,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) int rc; sigset_t sigsaved; + if (guestdbg_exit_pending(vcpu)) { + kvm_s390_prepare_debug_exit(vcpu); + return 0; + } + if (vcpu->sigset_active) sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved); - atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + kvm_s390_vcpu_start(vcpu); switch (kvm_run->exit_reason) { case KVM_EXIT_S390_SIEIC: @@ -1030,6 +1293,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) case KVM_EXIT_S390_RESET: case KVM_EXIT_S390_UCONTROL: case KVM_EXIT_S390_TSCH: + case KVM_EXIT_DEBUG: break; default: BUG(); @@ -1055,6 +1319,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) rc = -EINTR; } + if (guestdbg_exit_pending(vcpu) && !rc) { + kvm_s390_prepare_debug_exit(vcpu); + rc = 0; + } + if (rc == -EOPNOTSUPP) { /* intercept cannot be handled in-kernel, prepare kvm-run */ kvm_run->exit_reason = KVM_EXIT_S390_SIEIC; @@ -1072,7 +1341,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) kvm_run->psw_mask = vcpu->arch.sie_block->gpsw.mask; kvm_run->psw_addr = vcpu->arch.sie_block->gpsw.addr; - kvm_run->s.regs.prefix = vcpu->arch.sie_block->prefix; + kvm_run->s.regs.prefix = kvm_s390_get_prefix(vcpu); memcpy(&kvm_run->s.regs.crs, &vcpu->arch.sie_block->gcr, 128); if (vcpu->sigset_active) @@ -1082,83 +1351,52 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) return rc; } -static int __guestcopy(struct kvm_vcpu *vcpu, u64 guestdest, void *from, - unsigned long n, int prefix) -{ - if (prefix) - return copy_to_guest(vcpu, guestdest, from, n); - else - return copy_to_guest_absolute(vcpu, guestdest, from, n); -} - /* * store status at address * we use have two special cases: * KVM_S390_STORE_STATUS_NOADDR: -> 0x1200 on 64 bit * KVM_S390_STORE_STATUS_PREFIXED: -> prefix */ -int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long addr) +int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long gpa) { unsigned char archmode = 1; - int prefix; + unsigned int px; u64 clkcomp; + int rc; - if (addr == KVM_S390_STORE_STATUS_NOADDR) { - if (copy_to_guest_absolute(vcpu, 163ul, &archmode, 1)) + if (gpa == KVM_S390_STORE_STATUS_NOADDR) { + if (write_guest_abs(vcpu, 163, &archmode, 1)) return -EFAULT; - addr = SAVE_AREA_BASE; - prefix = 0; - } else if (addr == KVM_S390_STORE_STATUS_PREFIXED) { - if (copy_to_guest(vcpu, 163ul, &archmode, 1)) + gpa = SAVE_AREA_BASE; + } else if (gpa == KVM_S390_STORE_STATUS_PREFIXED) { + if (write_guest_real(vcpu, 163, &archmode, 1)) return -EFAULT; - addr = SAVE_AREA_BASE; - prefix = 1; - } else - prefix = 0; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs), - vcpu->arch.guest_fpregs.fprs, 128, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, gp_regs), - vcpu->run->s.regs.gprs, 128, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, psw), - &vcpu->arch.sie_block->gpsw, 16, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, pref_reg), - &vcpu->arch.sie_block->prefix, 4, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, - addr + offsetof(struct save_area, fp_ctrl_reg), - &vcpu->arch.guest_fpregs.fpc, 4, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, tod_reg), - &vcpu->arch.sie_block->todpr, 4, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, timer), - &vcpu->arch.sie_block->cputm, 8, prefix)) - return -EFAULT; - + gpa = kvm_s390_real_to_abs(vcpu, SAVE_AREA_BASE); + } + rc = write_guest_abs(vcpu, gpa + offsetof(struct save_area, fp_regs), + vcpu->arch.guest_fpregs.fprs, 128); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, gp_regs), + vcpu->run->s.regs.gprs, 128); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, psw), + &vcpu->arch.sie_block->gpsw, 16); + px = kvm_s390_get_prefix(vcpu); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, pref_reg), + &px, 4); + rc |= write_guest_abs(vcpu, + gpa + offsetof(struct save_area, fp_ctrl_reg), + &vcpu->arch.guest_fpregs.fpc, 4); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, tod_reg), + &vcpu->arch.sie_block->todpr, 4); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, timer), + &vcpu->arch.sie_block->cputm, 8); clkcomp = vcpu->arch.sie_block->ckc >> 8; - if (__guestcopy(vcpu, addr + offsetof(struct save_area, clk_cmp), - &clkcomp, 8, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, addr + offsetof(struct save_area, acc_regs), - &vcpu->run->s.regs.acrs, 64, prefix)) - return -EFAULT; - - if (__guestcopy(vcpu, - addr + offsetof(struct save_area, ctrl_regs), - &vcpu->arch.sie_block->gcr, 128, prefix)) - return -EFAULT; - return 0; + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, clk_cmp), + &clkcomp, 8); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, acc_regs), + &vcpu->run->s.regs.acrs, 64); + rc |= write_guest_abs(vcpu, gpa + offsetof(struct save_area, ctrl_regs), + &vcpu->arch.sie_block->gcr, 128); + return rc ? -EFAULT : 0; } int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr) @@ -1175,6 +1413,109 @@ int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr) return kvm_s390_store_status_unloaded(vcpu, addr); } +static inline int is_vcpu_stopped(struct kvm_vcpu *vcpu) +{ + return atomic_read(&(vcpu)->arch.sie_block->cpuflags) & CPUSTAT_STOPPED; +} + +static void __disable_ibs_on_vcpu(struct kvm_vcpu *vcpu) +{ + kvm_check_request(KVM_REQ_ENABLE_IBS, vcpu); + kvm_make_request(KVM_REQ_DISABLE_IBS, vcpu); + exit_sie_sync(vcpu); +} + +static void __disable_ibs_on_all_vcpus(struct kvm *kvm) +{ + unsigned int i; + struct kvm_vcpu *vcpu; + + kvm_for_each_vcpu(i, vcpu, kvm) { + __disable_ibs_on_vcpu(vcpu); + } +} + +static void __enable_ibs_on_vcpu(struct kvm_vcpu *vcpu) +{ + kvm_check_request(KVM_REQ_DISABLE_IBS, vcpu); + kvm_make_request(KVM_REQ_ENABLE_IBS, vcpu); + exit_sie_sync(vcpu); +} + +void kvm_s390_vcpu_start(struct kvm_vcpu *vcpu) +{ + int i, online_vcpus, started_vcpus = 0; + + if (!is_vcpu_stopped(vcpu)) + return; + + trace_kvm_s390_vcpu_start_stop(vcpu->vcpu_id, 1); + /* Only one cpu at a time may enter/leave the STOPPED state. */ + spin_lock_bh(&vcpu->kvm->arch.start_stop_lock); + online_vcpus = atomic_read(&vcpu->kvm->online_vcpus); + + for (i = 0; i < online_vcpus; i++) { + if (!is_vcpu_stopped(vcpu->kvm->vcpus[i])) + started_vcpus++; + } + + if (started_vcpus == 0) { + /* we're the only active VCPU -> speed it up */ + __enable_ibs_on_vcpu(vcpu); + } else if (started_vcpus == 1) { + /* + * As we are starting a second VCPU, we have to disable + * the IBS facility on all VCPUs to remove potentially + * oustanding ENABLE requests. + */ + __disable_ibs_on_all_vcpus(vcpu->kvm); + } + + atomic_clear_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + /* + * Another VCPU might have used IBS while we were offline. + * Let's play safe and flush the VCPU at startup. + */ + vcpu->arch.sie_block->ihcpu = 0xffff; + spin_unlock_bh(&vcpu->kvm->arch.start_stop_lock); + return; +} + +void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu) +{ + int i, online_vcpus, started_vcpus = 0; + struct kvm_vcpu *started_vcpu = NULL; + + if (is_vcpu_stopped(vcpu)) + return; + + trace_kvm_s390_vcpu_start_stop(vcpu->vcpu_id, 0); + /* Only one cpu at a time may enter/leave the STOPPED state. */ + spin_lock_bh(&vcpu->kvm->arch.start_stop_lock); + online_vcpus = atomic_read(&vcpu->kvm->online_vcpus); + + atomic_set_mask(CPUSTAT_STOPPED, &vcpu->arch.sie_block->cpuflags); + __disable_ibs_on_vcpu(vcpu); + + for (i = 0; i < online_vcpus; i++) { + if (!is_vcpu_stopped(vcpu->kvm->vcpus[i])) { + started_vcpus++; + started_vcpu = vcpu->kvm->vcpus[i]; + } + } + + if (started_vcpus == 1) { + /* + * As we only have one VCPU left, we want to enable the + * IBS facility for that VCPU to speed it up. + */ + __enable_ibs_on_vcpu(started_vcpu); + } + + spin_unlock_bh(&vcpu->kvm->arch.start_stop_lock); + return; +} + static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, struct kvm_enable_cap *cap) { diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h index 3c1e2274d9ea..a8655ed31616 100644 --- a/arch/s390/kvm/kvm-s390.h +++ b/arch/s390/kvm/kvm-s390.h @@ -28,7 +28,6 @@ int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu); /* Transactional Memory Execution related macros */ #define IS_TE_ENABLED(vcpu) ((vcpu->arch.sie_block->ecb & 0x10)) -#define TDB_ADDR 0x1800UL #define TDB_FORMAT1 1 #define IS_ITDB_VALID(vcpu) ((*(char *)vcpu->arch.sie_block->itdba == TDB_FORMAT1)) @@ -62,9 +61,15 @@ static inline int kvm_is_ucontrol(struct kvm *kvm) #endif } +#define GUEST_PREFIX_SHIFT 13 +static inline u32 kvm_s390_get_prefix(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.sie_block->prefix << GUEST_PREFIX_SHIFT; +} + static inline void kvm_s390_set_prefix(struct kvm_vcpu *vcpu, u32 prefix) { - vcpu->arch.sie_block->prefix = prefix & 0x7fffe000u; + vcpu->arch.sie_block->prefix = prefix >> GUEST_PREFIX_SHIFT; vcpu->arch.sie_block->ihcpu = 0xffff; kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu); } @@ -130,6 +135,7 @@ void kvm_s390_tasklet(unsigned long parm); void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu); void kvm_s390_deliver_pending_machine_checks(struct kvm_vcpu *vcpu); void kvm_s390_clear_local_irqs(struct kvm_vcpu *vcpu); +void kvm_s390_clear_float_irqs(struct kvm *kvm); int __must_check kvm_s390_inject_vm(struct kvm *kvm, struct kvm_s390_interrupt *s390int); int __must_check kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, @@ -137,35 +143,94 @@ int __must_check kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu, int __must_check kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code); struct kvm_s390_interrupt_info *kvm_s390_get_io_int(struct kvm *kvm, u64 cr6, u64 schid); +void kvm_s390_reinject_io_int(struct kvm *kvm, + struct kvm_s390_interrupt_info *inti); int kvm_s390_mask_adapter(struct kvm *kvm, unsigned int id, bool masked); /* implemented in priv.c */ +int is_valid_psw(psw_t *psw); int kvm_s390_handle_b2(struct kvm_vcpu *vcpu); int kvm_s390_handle_e5(struct kvm_vcpu *vcpu); int kvm_s390_handle_01(struct kvm_vcpu *vcpu); int kvm_s390_handle_b9(struct kvm_vcpu *vcpu); int kvm_s390_handle_lpsw(struct kvm_vcpu *vcpu); +int kvm_s390_handle_stctl(struct kvm_vcpu *vcpu); int kvm_s390_handle_lctl(struct kvm_vcpu *vcpu); int kvm_s390_handle_eb(struct kvm_vcpu *vcpu); /* implemented in sigp.c */ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu); +int kvm_s390_handle_sigp_pei(struct kvm_vcpu *vcpu); /* implemented in kvm-s390.c */ +long kvm_arch_fault_in_page(struct kvm_vcpu *vcpu, gpa_t gpa, int writable); int kvm_s390_store_status_unloaded(struct kvm_vcpu *vcpu, unsigned long addr); int kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr); +void kvm_s390_vcpu_start(struct kvm_vcpu *vcpu); +void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu); void s390_vcpu_block(struct kvm_vcpu *vcpu); void s390_vcpu_unblock(struct kvm_vcpu *vcpu); void exit_sie(struct kvm_vcpu *vcpu); void exit_sie_sync(struct kvm_vcpu *vcpu); -/* are we going to support cmma? */ -bool kvm_enabled_cmma(void); +int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu); +void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu); +/* is cmma enabled */ +bool kvm_s390_cmma_enabled(struct kvm *kvm); +int test_vfacility(unsigned long nr); + /* implemented in diag.c */ int kvm_s390_handle_diag(struct kvm_vcpu *vcpu); +/* implemented in interrupt.c */ +int kvm_s390_inject_prog_irq(struct kvm_vcpu *vcpu, + struct kvm_s390_pgm_info *pgm_info); + +/** + * kvm_s390_inject_prog_cond - conditionally inject a program check + * @vcpu: virtual cpu + * @rc: original return/error code + * + * This function is supposed to be used after regular guest access functions + * failed, to conditionally inject a program check to a vcpu. The typical + * pattern would look like + * + * rc = write_guest(vcpu, addr, data, len); + * if (rc) + * return kvm_s390_inject_prog_cond(vcpu, rc); + * + * A negative return code from guest access functions implies an internal error + * like e.g. out of memory. In these cases no program check should be injected + * to the guest. + * A positive value implies that an exception happened while accessing a guest's + * memory. In this case all data belonging to the corresponding program check + * has been stored in vcpu->arch.pgm and can be injected with + * kvm_s390_inject_prog_irq(). + * + * Returns: - the original @rc value if @rc was negative (internal error) + * - zero if @rc was already zero + * - zero or error code from injecting if @rc was positive + * (program check injected to @vcpu) + */ +static inline int kvm_s390_inject_prog_cond(struct kvm_vcpu *vcpu, int rc) +{ + if (rc <= 0) + return rc; + return kvm_s390_inject_prog_irq(vcpu, &vcpu->arch.pgm); +} /* implemented in interrupt.c */ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu); int psw_extint_disabled(struct kvm_vcpu *vcpu); void kvm_s390_destroy_adapters(struct kvm *kvm); +int kvm_s390_si_ext_call_pending(struct kvm_vcpu *vcpu); + +/* implemented in guestdbg.c */ +void kvm_s390_backup_guest_per_regs(struct kvm_vcpu *vcpu); +void kvm_s390_restore_guest_per_regs(struct kvm_vcpu *vcpu); +void kvm_s390_patch_guest_per_regs(struct kvm_vcpu *vcpu); +int kvm_s390_import_bp_data(struct kvm_vcpu *vcpu, + struct kvm_guest_debug *dbg); +void kvm_s390_clear_bp_data(struct kvm_vcpu *vcpu); +void kvm_s390_prepare_debug_exit(struct kvm_vcpu *vcpu); +void kvm_s390_handle_per_event(struct kvm_vcpu *vcpu); #endif diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index 476e9e218f43..f89c1cd67751 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -35,8 +35,8 @@ static int handle_set_clock(struct kvm_vcpu *vcpu) { struct kvm_vcpu *cpup; s64 hostclk, val; + int i, rc; u64 op2; - int i; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); @@ -44,8 +44,9 @@ static int handle_set_clock(struct kvm_vcpu *vcpu) op2 = kvm_s390_get_base_disp_s(vcpu); if (op2 & 7) /* Operand must be on a doubleword boundary */ return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (get_guest(vcpu, val, (u64 __user *) op2)) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = read_guest(vcpu, op2, &val, sizeof(val)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); if (store_tod_clock(&hostclk)) { kvm_s390_set_psw_cc(vcpu, 3); @@ -65,8 +66,8 @@ static int handle_set_clock(struct kvm_vcpu *vcpu) static int handle_set_prefix(struct kvm_vcpu *vcpu) { u64 operand2; - u32 address = 0; - u8 tmp; + u32 address; + int rc; vcpu->stat.instruction_spx++; @@ -80,14 +81,18 @@ static int handle_set_prefix(struct kvm_vcpu *vcpu) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); /* get the value */ - if (get_guest(vcpu, address, (u32 __user *) operand2)) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = read_guest(vcpu, operand2, &address, sizeof(address)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); - address = address & 0x7fffe000u; + address &= 0x7fffe000u; - /* make sure that the new value is valid memory */ - if (copy_from_guest_absolute(vcpu, &tmp, address, 1) || - (copy_from_guest_absolute(vcpu, &tmp, address + PAGE_SIZE, 1))) + /* + * Make sure the new value is valid memory. We only need to check the + * first page, since address is 8k aligned and memory pieces are always + * at least 1MB aligned and have at least a size of 1MB. + */ + if (kvm_is_error_gpa(vcpu->kvm, address)) return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); kvm_s390_set_prefix(vcpu, address); @@ -101,6 +106,7 @@ static int handle_store_prefix(struct kvm_vcpu *vcpu) { u64 operand2; u32 address; + int rc; vcpu->stat.instruction_stpx++; @@ -113,12 +119,12 @@ static int handle_store_prefix(struct kvm_vcpu *vcpu) if (operand2 & 3) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - address = vcpu->arch.sie_block->prefix; - address = address & 0x7fffe000u; + address = kvm_s390_get_prefix(vcpu); /* get the value */ - if (put_guest(vcpu, address, (u32 __user *)operand2)) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = write_guest(vcpu, operand2, &address, sizeof(address)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); VCPU_EVENT(vcpu, 5, "storing prefix to %x", address); trace_kvm_s390_handle_prefix(vcpu, 0, address); @@ -127,28 +133,44 @@ static int handle_store_prefix(struct kvm_vcpu *vcpu) static int handle_store_cpu_address(struct kvm_vcpu *vcpu) { - u64 useraddr; + u16 vcpu_id = vcpu->vcpu_id; + u64 ga; + int rc; vcpu->stat.instruction_stap++; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); - useraddr = kvm_s390_get_base_disp_s(vcpu); + ga = kvm_s390_get_base_disp_s(vcpu); - if (useraddr & 1) + if (ga & 1) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (put_guest(vcpu, vcpu->vcpu_id, (u16 __user *)useraddr)) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = write_guest(vcpu, ga, &vcpu_id, sizeof(vcpu_id)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); - VCPU_EVENT(vcpu, 5, "storing cpu address to %llx", useraddr); - trace_kvm_s390_handle_stap(vcpu, useraddr); + VCPU_EVENT(vcpu, 5, "storing cpu address to %llx", ga); + trace_kvm_s390_handle_stap(vcpu, ga); return 0; } +static void __skey_check_enable(struct kvm_vcpu *vcpu) +{ + if (!(vcpu->arch.sie_block->ictl & (ICTL_ISKE | ICTL_SSKE | ICTL_RRBE))) + return; + + s390_enable_skey(); + trace_kvm_s390_skey_related_inst(vcpu); + vcpu->arch.sie_block->ictl &= ~(ICTL_ISKE | ICTL_SSKE | ICTL_RRBE); +} + + static int handle_skey(struct kvm_vcpu *vcpu) { + __skey_check_enable(vcpu); + vcpu->stat.instruction_storage_key++; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) @@ -160,9 +182,21 @@ static int handle_skey(struct kvm_vcpu *vcpu) return 0; } +static int handle_ipte_interlock(struct kvm_vcpu *vcpu) +{ + psw_t *psw = &vcpu->arch.sie_block->gpsw; + + vcpu->stat.instruction_ipte_interlock++; + if (psw_bits(*psw).p) + return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); + wait_event(vcpu->kvm->arch.ipte_wq, !ipte_lock_held(vcpu)); + psw->addr = __rewind_psw(*psw, 4); + VCPU_EVENT(vcpu, 4, "%s", "retrying ipte interlock operation"); + return 0; +} + static int handle_test_block(struct kvm_vcpu *vcpu) { - unsigned long hva; gpa_t addr; int reg2; @@ -171,16 +205,18 @@ static int handle_test_block(struct kvm_vcpu *vcpu) kvm_s390_get_regs_rre(vcpu, NULL, ®2); addr = vcpu->run->s.regs.gprs[reg2] & PAGE_MASK; + addr = kvm_s390_logical_to_effective(vcpu, addr); + if (kvm_s390_check_low_addr_protection(vcpu, addr)) + return kvm_s390_inject_prog_irq(vcpu, &vcpu->arch.pgm); addr = kvm_s390_real_to_abs(vcpu, addr); - hva = gfn_to_hva(vcpu->kvm, gpa_to_gfn(addr)); - if (kvm_is_error_hva(hva)) + if (kvm_is_error_gpa(vcpu->kvm, addr)) return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); /* * We don't expect errors on modern systems, and do not care * about storage keys (yet), so let's just clear the page. */ - if (clear_user((void __user *)hva, PAGE_SIZE) != 0) + if (kvm_clear_guest(vcpu->kvm, addr, PAGE_SIZE)) return -EFAULT; kvm_s390_set_psw_cc(vcpu, 0); vcpu->run->s.regs.gprs[0] = 0; @@ -190,9 +226,12 @@ static int handle_test_block(struct kvm_vcpu *vcpu) static int handle_tpi(struct kvm_vcpu *vcpu) { struct kvm_s390_interrupt_info *inti; + unsigned long len; + u32 tpi_data[3]; + int cc, rc; u64 addr; - int cc; + rc = 0; addr = kvm_s390_get_base_disp_s(vcpu); if (addr & 3) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); @@ -201,30 +240,41 @@ static int handle_tpi(struct kvm_vcpu *vcpu) if (!inti) goto no_interrupt; cc = 1; + tpi_data[0] = inti->io.subchannel_id << 16 | inti->io.subchannel_nr; + tpi_data[1] = inti->io.io_int_parm; + tpi_data[2] = inti->io.io_int_word; if (addr) { /* * Store the two-word I/O interruption code into the * provided area. */ - if (put_guest(vcpu, inti->io.subchannel_id, (u16 __user *)addr) - || put_guest(vcpu, inti->io.subchannel_nr, (u16 __user *)(addr + 2)) - || put_guest(vcpu, inti->io.io_int_parm, (u32 __user *)(addr + 4))) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + len = sizeof(tpi_data) - 4; + rc = write_guest(vcpu, addr, &tpi_data, len); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); } else { /* * Store the three-word I/O interruption code into * the appropriate lowcore area. */ - put_guest(vcpu, inti->io.subchannel_id, (u16 __user *) __LC_SUBCHANNEL_ID); - put_guest(vcpu, inti->io.subchannel_nr, (u16 __user *) __LC_SUBCHANNEL_NR); - put_guest(vcpu, inti->io.io_int_parm, (u32 __user *) __LC_IO_INT_PARM); - put_guest(vcpu, inti->io.io_int_word, (u32 __user *) __LC_IO_INT_WORD); + len = sizeof(tpi_data); + if (write_guest_lc(vcpu, __LC_SUBCHANNEL_ID, &tpi_data, len)) + rc = -EFAULT; } - kfree(inti); + /* + * If we encounter a problem storing the interruption code, the + * instruction is suppressed from the guest's view: reinject the + * interrupt. + */ + if (!rc) + kfree(inti); + else + kvm_s390_reinject_io_int(vcpu->kvm, inti); no_interrupt: /* Set condition code and we're done. */ - kvm_s390_set_psw_cc(vcpu, cc); - return 0; + if (!rc) + kvm_s390_set_psw_cc(vcpu, cc); + return rc ? -EFAULT : 0; } static int handle_tsch(struct kvm_vcpu *vcpu) @@ -292,10 +342,10 @@ static int handle_stfl(struct kvm_vcpu *vcpu) if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); - rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list), - vfacilities, 4); + rc = write_guest_lc(vcpu, offsetof(struct _lowcore, stfl_fac_list), + vfacilities, 4); if (rc) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + return rc; VCPU_EVENT(vcpu, 5, "store facility list value %x", *(unsigned int *) vfacilities); trace_kvm_s390_handle_stfl(vcpu, *(unsigned int *) vfacilities); @@ -314,7 +364,8 @@ static void handle_new_psw(struct kvm_vcpu *vcpu) #define PSW_ADDR_24 0x0000000000ffffffUL #define PSW_ADDR_31 0x000000007fffffffUL -static int is_valid_psw(psw_t *psw) { +int is_valid_psw(psw_t *psw) +{ if (psw->mask & PSW_MASK_UNASSIGNED) return 0; if ((psw->mask & PSW_MASK_ADDR_MODE) == PSW_MASK_BA) { @@ -325,6 +376,8 @@ static int is_valid_psw(psw_t *psw) { return 0; if ((psw->mask & PSW_MASK_ADDR_MODE) == PSW_MASK_EA) return 0; + if (psw->addr & 1) + return 0; return 1; } @@ -333,6 +386,7 @@ int kvm_s390_handle_lpsw(struct kvm_vcpu *vcpu) psw_t *gpsw = &vcpu->arch.sie_block->gpsw; psw_compat_t new_psw; u64 addr; + int rc; if (gpsw->mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); @@ -340,8 +394,10 @@ int kvm_s390_handle_lpsw(struct kvm_vcpu *vcpu) addr = kvm_s390_get_base_disp_s(vcpu); if (addr & 7) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (copy_from_guest(vcpu, &new_psw, addr, sizeof(new_psw))) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + + rc = read_guest(vcpu, addr, &new_psw, sizeof(new_psw)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); if (!(new_psw.mask & PSW32_MASK_BASE)) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); gpsw->mask = (new_psw.mask & ~PSW32_MASK_BASE) << 32; @@ -357,6 +413,7 @@ static int handle_lpswe(struct kvm_vcpu *vcpu) { psw_t new_psw; u64 addr; + int rc; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); @@ -364,8 +421,9 @@ static int handle_lpswe(struct kvm_vcpu *vcpu) addr = kvm_s390_get_base_disp_s(vcpu); if (addr & 7) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (copy_from_guest(vcpu, &new_psw, addr, sizeof(new_psw))) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = read_guest(vcpu, addr, &new_psw, sizeof(new_psw)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); vcpu->arch.sie_block->gpsw = new_psw; if (!is_valid_psw(&vcpu->arch.sie_block->gpsw)) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); @@ -375,7 +433,9 @@ static int handle_lpswe(struct kvm_vcpu *vcpu) static int handle_stidp(struct kvm_vcpu *vcpu) { + u64 stidp_data = vcpu->arch.stidp_data; u64 operand2; + int rc; vcpu->stat.instruction_stidp++; @@ -387,8 +447,9 @@ static int handle_stidp(struct kvm_vcpu *vcpu) if (operand2 & 7) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - if (put_guest(vcpu, vcpu->arch.stidp_data, (u64 __user *)operand2)) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + rc = write_guest(vcpu, operand2, &stidp_data, sizeof(stidp_data)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); VCPU_EVENT(vcpu, 5, "%s", "store cpu id"); return 0; @@ -474,9 +535,10 @@ static int handle_stsi(struct kvm_vcpu *vcpu) break; } - if (copy_to_guest_absolute(vcpu, operand2, (void *) mem, PAGE_SIZE)) { - rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - goto out_exception; + rc = write_guest(vcpu, operand2, (void *)mem, PAGE_SIZE); + if (rc) { + rc = kvm_s390_inject_prog_cond(vcpu, rc); + goto out; } trace_kvm_s390_handle_stsi(vcpu, fc, sel1, sel2, operand2); free_page(mem); @@ -485,7 +547,7 @@ static int handle_stsi(struct kvm_vcpu *vcpu) return 0; out_no_data: kvm_s390_set_psw_cc(vcpu, 3); -out_exception: +out: free_page(mem); return rc; } @@ -496,6 +558,7 @@ static const intercept_handler_t b2_handlers[256] = { [0x10] = handle_set_prefix, [0x11] = handle_store_prefix, [0x12] = handle_store_cpu_address, + [0x21] = handle_ipte_interlock, [0x29] = handle_skey, [0x2a] = handle_skey, [0x2b] = handle_skey, @@ -513,6 +576,7 @@ static const intercept_handler_t b2_handlers[256] = { [0x3a] = handle_io_inst, [0x3b] = handle_io_inst, [0x3c] = handle_io_inst, + [0x50] = handle_ipte_interlock, [0x5f] = handle_io_inst, [0x74] = handle_io_inst, [0x76] = handle_io_inst, @@ -591,6 +655,11 @@ static int handle_pfmf(struct kvm_vcpu *vcpu) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); start = vcpu->run->s.regs.gprs[reg2] & PAGE_MASK; + if (vcpu->run->s.regs.gprs[reg1] & PFMF_CF) { + if (kvm_s390_check_low_addr_protection(vcpu, start)) + return kvm_s390_inject_prog_irq(vcpu, &vcpu->arch.pgm); + } + switch (vcpu->run->s.regs.gprs[reg1] & PFMF_FSC) { case 0x00000000: end = (start + (1UL << 12)) & ~((1UL << 12) - 1); @@ -606,10 +675,15 @@ static int handle_pfmf(struct kvm_vcpu *vcpu) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); } while (start < end) { - unsigned long useraddr; - - useraddr = gmap_translate(start, vcpu->arch.gmap); - if (IS_ERR((void *)useraddr)) + unsigned long useraddr, abs_addr; + + /* Translate guest address to host address */ + if ((vcpu->run->s.regs.gprs[reg1] & PFMF_FSC) == 0) + abs_addr = kvm_s390_real_to_abs(vcpu, start); + else + abs_addr = start; + useraddr = gfn_to_hva(vcpu->kvm, gpa_to_gfn(abs_addr)); + if (kvm_is_error_hva(useraddr)) return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); if (vcpu->run->s.regs.gprs[reg1] & PFMF_CF) { @@ -618,6 +692,7 @@ static int handle_pfmf(struct kvm_vcpu *vcpu) } if (vcpu->run->s.regs.gprs[reg1] & PFMF_SK) { + __skey_check_enable(vcpu); if (set_guest_storage_key(current->mm, useraddr, vcpu->run->s.regs.gprs[reg1] & PFMF_KEY, vcpu->run->s.regs.gprs[reg1] & PFMF_NQ)) @@ -642,7 +717,7 @@ static int handle_essa(struct kvm_vcpu *vcpu) VCPU_EVENT(vcpu, 5, "cmma release %d pages", entries); gmap = vcpu->arch.gmap; vcpu->stat.instruction_essa++; - if (!kvm_enabled_cmma() || !vcpu->arch.sie_block->cbrlo) + if (!kvm_s390_cmma_enabled(vcpu->kvm)) return kvm_s390_inject_program_int(vcpu, PGM_OPERATION); if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) @@ -672,7 +747,10 @@ static int handle_essa(struct kvm_vcpu *vcpu) } static const intercept_handler_t b9_handlers[256] = { + [0x8a] = handle_ipte_interlock, [0x8d] = handle_epsw, + [0x8e] = handle_ipte_interlock, + [0x8f] = handle_ipte_interlock, [0xab] = handle_essa, [0xaf] = handle_pfmf, }; @@ -693,32 +771,67 @@ int kvm_s390_handle_lctl(struct kvm_vcpu *vcpu) { int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; int reg3 = vcpu->arch.sie_block->ipa & 0x000f; - u64 useraddr; u32 val = 0; int reg, rc; + u64 ga; vcpu->stat.instruction_lctl++; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); - useraddr = kvm_s390_get_base_disp_rs(vcpu); + ga = kvm_s390_get_base_disp_rs(vcpu); - if (useraddr & 3) + if (ga & 3) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); - VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x, addr:%llx", reg1, reg3, - useraddr); - trace_kvm_s390_handle_lctl(vcpu, 0, reg1, reg3, useraddr); + VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x, addr:%llx", reg1, reg3, ga); + trace_kvm_s390_handle_lctl(vcpu, 0, reg1, reg3, ga); reg = reg1; do { - rc = get_guest(vcpu, val, (u32 __user *) useraddr); + rc = read_guest(vcpu, ga, &val, sizeof(val)); if (rc) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + return kvm_s390_inject_prog_cond(vcpu, rc); vcpu->arch.sie_block->gcr[reg] &= 0xffffffff00000000ul; vcpu->arch.sie_block->gcr[reg] |= val; - useraddr += 4; + ga += 4; + if (reg == reg3) + break; + reg = (reg + 1) % 16; + } while (1); + + return 0; +} + +int kvm_s390_handle_stctl(struct kvm_vcpu *vcpu) +{ + int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; + int reg3 = vcpu->arch.sie_block->ipa & 0x000f; + u64 ga; + u32 val; + int reg, rc; + + vcpu->stat.instruction_stctl++; + + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) + return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); + + ga = kvm_s390_get_base_disp_rs(vcpu); + + if (ga & 3) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + + VCPU_EVENT(vcpu, 5, "stctl r1:%x, r3:%x, addr:%llx", reg1, reg3, ga); + trace_kvm_s390_handle_stctl(vcpu, 0, reg1, reg3, ga); + + reg = reg1; + do { + val = vcpu->arch.sie_block->gcr[reg] & 0x00000000fffffffful; + rc = write_guest(vcpu, ga, &val, sizeof(val)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); + ga += 4; if (reg == reg3) break; reg = (reg + 1) % 16; @@ -731,7 +844,7 @@ static int handle_lctlg(struct kvm_vcpu *vcpu) { int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; int reg3 = vcpu->arch.sie_block->ipa & 0x000f; - u64 useraddr; + u64 ga, val; int reg, rc; vcpu->stat.instruction_lctlg++; @@ -739,23 +852,58 @@ static int handle_lctlg(struct kvm_vcpu *vcpu) if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); - useraddr = kvm_s390_get_base_disp_rsy(vcpu); + ga = kvm_s390_get_base_disp_rsy(vcpu); - if (useraddr & 7) + if (ga & 7) return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); reg = reg1; - VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x, addr:%llx", reg1, reg3, - useraddr); - trace_kvm_s390_handle_lctl(vcpu, 1, reg1, reg3, useraddr); + VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x, addr:%llx", reg1, reg3, ga); + trace_kvm_s390_handle_lctl(vcpu, 1, reg1, reg3, ga); do { - rc = get_guest(vcpu, vcpu->arch.sie_block->gcr[reg], - (u64 __user *) useraddr); + rc = read_guest(vcpu, ga, &val, sizeof(val)); if (rc) - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - useraddr += 8; + return kvm_s390_inject_prog_cond(vcpu, rc); + vcpu->arch.sie_block->gcr[reg] = val; + ga += 8; + if (reg == reg3) + break; + reg = (reg + 1) % 16; + } while (1); + + return 0; +} + +static int handle_stctg(struct kvm_vcpu *vcpu) +{ + int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; + int reg3 = vcpu->arch.sie_block->ipa & 0x000f; + u64 ga, val; + int reg, rc; + + vcpu->stat.instruction_stctg++; + + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE) + return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP); + + ga = kvm_s390_get_base_disp_rsy(vcpu); + + if (ga & 7) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + + reg = reg1; + + VCPU_EVENT(vcpu, 5, "stctg r1:%x, r3:%x, addr:%llx", reg1, reg3, ga); + trace_kvm_s390_handle_stctl(vcpu, 1, reg1, reg3, ga); + + do { + val = vcpu->arch.sie_block->gcr[reg]; + rc = write_guest(vcpu, ga, &val, sizeof(val)); + if (rc) + return kvm_s390_inject_prog_cond(vcpu, rc); + ga += 8; if (reg == reg3) break; reg = (reg + 1) % 16; @@ -766,6 +914,7 @@ static int handle_lctlg(struct kvm_vcpu *vcpu) static const intercept_handler_t eb_handlers[256] = { [0x2f] = handle_lctlg, + [0x25] = handle_stctg, }; int kvm_s390_handle_eb(struct kvm_vcpu *vcpu) @@ -781,8 +930,9 @@ int kvm_s390_handle_eb(struct kvm_vcpu *vcpu) static int handle_tprot(struct kvm_vcpu *vcpu) { u64 address1, address2; - struct vm_area_struct *vma; - unsigned long user_address; + unsigned long hva, gpa; + int ret = 0, cc = 0; + bool writable; vcpu->stat.instruction_tprot++; @@ -793,32 +943,41 @@ static int handle_tprot(struct kvm_vcpu *vcpu) /* we only handle the Linux memory detection case: * access key == 0 - * guest DAT == off * everything else goes to userspace. */ if (address2 & 0xf0) return -EOPNOTSUPP; if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_DAT) - return -EOPNOTSUPP; - - down_read(¤t->mm->mmap_sem); - user_address = __gmap_translate(address1, vcpu->arch.gmap); - if (IS_ERR_VALUE(user_address)) - goto out_inject; - vma = find_vma(current->mm, user_address); - if (!vma) - goto out_inject; - vcpu->arch.sie_block->gpsw.mask &= ~(3ul << 44); - if (!(vma->vm_flags & VM_WRITE) && (vma->vm_flags & VM_READ)) - vcpu->arch.sie_block->gpsw.mask |= (1ul << 44); - if (!(vma->vm_flags & VM_WRITE) && !(vma->vm_flags & VM_READ)) - vcpu->arch.sie_block->gpsw.mask |= (2ul << 44); - - up_read(¤t->mm->mmap_sem); - return 0; + ipte_lock(vcpu); + ret = guest_translate_address(vcpu, address1, &gpa, 1); + if (ret == PGM_PROTECTION) { + /* Write protected? Try again with read-only... */ + cc = 1; + ret = guest_translate_address(vcpu, address1, &gpa, 0); + } + if (ret) { + if (ret == PGM_ADDRESSING || ret == PGM_TRANSLATION_SPEC) { + ret = kvm_s390_inject_program_int(vcpu, ret); + } else if (ret > 0) { + /* Translation not available */ + kvm_s390_set_psw_cc(vcpu, 3); + ret = 0; + } + goto out_unlock; + } -out_inject: - up_read(¤t->mm->mmap_sem); - return kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + hva = gfn_to_hva_prot(vcpu->kvm, gpa_to_gfn(gpa), &writable); + if (kvm_is_error_hva(hva)) { + ret = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + } else { + if (!writable) + cc = 1; /* Write not permitted ==> read-only */ + kvm_s390_set_psw_cc(vcpu, cc); + /* Note: CC2 only occurs for storage keys (not supported yet) */ + } +out_unlock: + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_DAT) + ipte_unlock(vcpu); + return ret; } int kvm_s390_handle_e5(struct kvm_vcpu *vcpu) diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 26caeb530a78..43079a48cc98 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -54,33 +54,23 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr) { - struct kvm_s390_local_interrupt *li; - struct kvm_s390_interrupt_info *inti; + struct kvm_s390_interrupt s390int = { + .type = KVM_S390_INT_EMERGENCY, + .parm = vcpu->vcpu_id, + }; struct kvm_vcpu *dst_vcpu = NULL; + int rc = 0; if (cpu_addr < KVM_MAX_VCPUS) dst_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr); if (!dst_vcpu) return SIGP_CC_NOT_OPERATIONAL; - inti = kzalloc(sizeof(*inti), GFP_KERNEL); - if (!inti) - return -ENOMEM; - - inti->type = KVM_S390_INT_EMERGENCY; - inti->emerg.code = vcpu->vcpu_id; - - li = &dst_vcpu->arch.local_int; - spin_lock_bh(&li->lock); - list_add_tail(&inti->list, &li->list); - atomic_set(&li->active, 1); - atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags); - if (waitqueue_active(li->wq)) - wake_up_interruptible(li->wq); - spin_unlock_bh(&li->lock); - VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr); + rc = kvm_s390_inject_vcpu(dst_vcpu, &s390int); + if (!rc) + VCPU_EVENT(vcpu, 4, "sent sigp emerg to cpu %x", cpu_addr); - return SIGP_CC_ORDER_CODE_ACCEPTED; + return rc ? rc : SIGP_CC_ORDER_CODE_ACCEPTED; } static int __sigp_conditional_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr, @@ -116,33 +106,23 @@ static int __sigp_conditional_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr, static int __sigp_external_call(struct kvm_vcpu *vcpu, u16 cpu_addr) { - struct kvm_s390_local_interrupt *li; - struct kvm_s390_interrupt_info *inti; + struct kvm_s390_interrupt s390int = { + .type = KVM_S390_INT_EXTERNAL_CALL, + .parm = vcpu->vcpu_id, + }; struct kvm_vcpu *dst_vcpu = NULL; + int rc; if (cpu_addr < KVM_MAX_VCPUS) dst_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr); if (!dst_vcpu) return SIGP_CC_NOT_OPERATIONAL; - inti = kzalloc(sizeof(*inti), GFP_KERNEL); - if (!inti) - return -ENOMEM; + rc = kvm_s390_inject_vcpu(dst_vcpu, &s390int); + if (!rc) + VCPU_EVENT(vcpu, 4, "sent sigp ext call to cpu %x", cpu_addr); - inti->type = KVM_S390_INT_EXTERNAL_CALL; - inti->extcall.code = vcpu->vcpu_id; - - li = &dst_vcpu->arch.local_int; - spin_lock_bh(&li->lock); - list_add_tail(&inti->list, &li->list); - atomic_set(&li->active, 1); - atomic_set_mask(CPUSTAT_EXT_INT, li->cpuflags); - if (waitqueue_active(li->wq)) - wake_up_interruptible(li->wq); - spin_unlock_bh(&li->lock); - VCPU_EVENT(vcpu, 4, "sent sigp ext call to cpu %x", cpu_addr); - - return SIGP_CC_ORDER_CODE_ACCEPTED; + return rc ? rc : SIGP_CC_ORDER_CODE_ACCEPTED; } static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action) @@ -235,7 +215,6 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, struct kvm_vcpu *dst_vcpu = NULL; struct kvm_s390_interrupt_info *inti; int rc; - u8 tmp; if (cpu_addr < KVM_MAX_VCPUS) dst_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr); @@ -243,10 +222,13 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, return SIGP_CC_NOT_OPERATIONAL; li = &dst_vcpu->arch.local_int; - /* make sure that the new value is valid memory */ - address = address & 0x7fffe000u; - if (copy_from_guest_absolute(vcpu, &tmp, address, 1) || - copy_from_guest_absolute(vcpu, &tmp, address + PAGE_SIZE, 1)) { + /* + * Make sure the new value is valid memory. We only need to check the + * first page, since address is 8k aligned and memory pieces are always + * at least 1MB aligned and have at least a size of 1MB. + */ + address &= 0x7fffe000u; + if (kvm_is_error_gpa(vcpu->kvm, address)) { *reg &= 0xffffffff00000000UL; *reg |= SIGP_STATUS_INVALID_PARAMETER; return SIGP_CC_STATUS_STORED; @@ -456,3 +438,38 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) kvm_s390_set_psw_cc(vcpu, rc); return 0; } + +/* + * Handle SIGP partial execution interception. + * + * This interception will occur at the source cpu when a source cpu sends an + * external call to a target cpu and the target cpu has the WAIT bit set in + * its cpuflags. Interception will occurr after the interrupt indicator bits at + * the target cpu have been set. All error cases will lead to instruction + * interception, therefore nothing is to be checked or prepared. + */ +int kvm_s390_handle_sigp_pei(struct kvm_vcpu *vcpu) +{ + int r3 = vcpu->arch.sie_block->ipa & 0x000f; + u16 cpu_addr = vcpu->run->s.regs.gprs[r3]; + struct kvm_vcpu *dest_vcpu; + u8 order_code = kvm_s390_get_base_disp_rs(vcpu); + + trace_kvm_s390_handle_sigp_pei(vcpu, order_code, cpu_addr); + + if (order_code == SIGP_EXTERNAL_CALL) { + dest_vcpu = kvm_get_vcpu(vcpu->kvm, cpu_addr); + BUG_ON(dest_vcpu == NULL); + + spin_lock_bh(&dest_vcpu->arch.local_int.lock); + if (waitqueue_active(&dest_vcpu->wq)) + wake_up_interruptible(&dest_vcpu->wq); + dest_vcpu->preempted = true; + spin_unlock_bh(&dest_vcpu->arch.local_int.lock); + + kvm_s390_set_psw_cc(vcpu, SIGP_CC_ORDER_CODE_ACCEPTED); + return 0; + } + + return -EOPNOTSUPP; +} diff --git a/arch/s390/kvm/trace-s390.h b/arch/s390/kvm/trace-s390.h index 13f30f58a2df..647e9d6a4818 100644 --- a/arch/s390/kvm/trace-s390.h +++ b/arch/s390/kvm/trace-s390.h @@ -68,6 +68,27 @@ TRACE_EVENT(kvm_s390_destroy_vcpu, ); /* + * Trace point for start and stop of vpcus. + */ +TRACE_EVENT(kvm_s390_vcpu_start_stop, + TP_PROTO(unsigned int id, int state), + TP_ARGS(id, state), + + TP_STRUCT__entry( + __field(unsigned int, id) + __field(int, state) + ), + + TP_fast_assign( + __entry->id = id; + __entry->state = state; + ), + + TP_printk("%s cpu %d", __entry->state ? "starting" : "stopping", + __entry->id) + ); + +/* * Trace points for injection of interrupts, either per machine or * per vcpu. */ @@ -223,6 +244,28 @@ TRACE_EVENT(kvm_s390_enable_css, __entry->kvm) ); +/* + * Trace point for enabling and disabling interlocking-and-broadcasting + * suppression. + */ +TRACE_EVENT(kvm_s390_enable_disable_ibs, + TP_PROTO(unsigned int id, int state), + TP_ARGS(id, state), + + TP_STRUCT__entry( + __field(unsigned int, id) + __field(int, state) + ), + + TP_fast_assign( + __entry->id = id; + __entry->state = state; + ), + + TP_printk("%s ibs on cpu %d", + __entry->state ? "enabling" : "disabling", __entry->id) + ); + #endif /* _TRACE_KVMS390_H */ diff --git a/arch/s390/kvm/trace.h b/arch/s390/kvm/trace.h index e8e7213d4cc5..916834d7a73a 100644 --- a/arch/s390/kvm/trace.h +++ b/arch/s390/kvm/trace.h @@ -2,7 +2,7 @@ #define _TRACE_KVM_H #include <linux/tracepoint.h> -#include <asm/sigp.h> +#include <asm/sie.h> #include <asm/debug.h> #include <asm/dis.h> @@ -30,6 +30,20 @@ TP_printk("%02d[%016lx-%016lx]: " p_str, __entry->id, \ __entry->pswmask, __entry->pswaddr, p_args) +TRACE_EVENT(kvm_s390_skey_related_inst, + TP_PROTO(VCPU_PROTO_COMMON), + TP_ARGS(VCPU_ARGS_COMMON), + + TP_STRUCT__entry( + VCPU_FIELD_COMMON + ), + + TP_fast_assign( + VCPU_ASSIGN_COMMON + ), + VCPU_TP_PRINTK("%s", "first instruction related to skeys on vcpu") + ); + TRACE_EVENT(kvm_s390_major_guest_pfault, TP_PROTO(VCPU_PROTO_COMMON), TP_ARGS(VCPU_ARGS_COMMON), @@ -111,17 +125,6 @@ TRACE_EVENT(kvm_s390_sie_fault, VCPU_TP_PRINTK("%s", "fault in sie instruction") ); -#define sie_intercept_code \ - {0x04, "Instruction"}, \ - {0x08, "Program interruption"}, \ - {0x0C, "Instruction and program interruption"}, \ - {0x10, "External request"}, \ - {0x14, "External interruption"}, \ - {0x18, "I/O request"}, \ - {0x1C, "Wait state"}, \ - {0x20, "Validity"}, \ - {0x28, "Stop request"} - TRACE_EVENT(kvm_s390_sie_exit, TP_PROTO(VCPU_PROTO_COMMON, u8 icptcode), TP_ARGS(VCPU_ARGS_COMMON, icptcode), @@ -151,7 +154,6 @@ TRACE_EVENT(kvm_s390_intercept_instruction, TP_STRUCT__entry( VCPU_FIELD_COMMON __field(__u64, instruction) - __field(char, insn[8]) ), TP_fast_assign( @@ -162,10 +164,8 @@ TRACE_EVENT(kvm_s390_intercept_instruction, VCPU_TP_PRINTK("intercepted instruction %016llx (%s)", __entry->instruction, - insn_to_mnemonic((unsigned char *) - &__entry->instruction, - __entry->insn, sizeof(__entry->insn)) ? - "unknown" : __entry->insn) + __print_symbolic(icpt_insn_decoder(__entry->instruction), + icpt_insn_codes)) ); /* @@ -213,18 +213,6 @@ TRACE_EVENT(kvm_s390_intercept_validity, * Trace points for instructions that are of special interest. */ -#define sigp_order_codes \ - {SIGP_SENSE, "sense"}, \ - {SIGP_EXTERNAL_CALL, "external call"}, \ - {SIGP_EMERGENCY_SIGNAL, "emergency signal"}, \ - {SIGP_STOP, "stop"}, \ - {SIGP_STOP_AND_STORE_STATUS, "stop and store status"}, \ - {SIGP_SET_ARCHITECTURE, "set architecture"}, \ - {SIGP_SET_PREFIX, "set prefix"}, \ - {SIGP_STORE_STATUS_AT_ADDRESS, "store status at addr"}, \ - {SIGP_SENSE_RUNNING, "sense running"}, \ - {SIGP_RESTART, "restart"} - TRACE_EVENT(kvm_s390_handle_sigp, TP_PROTO(VCPU_PROTO_COMMON, __u8 order_code, __u16 cpu_addr, \ __u32 parameter), @@ -251,12 +239,28 @@ TRACE_EVENT(kvm_s390_handle_sigp, __entry->cpu_addr, __entry->parameter) ); -#define diagnose_codes \ - {0x10, "release pages"}, \ - {0x44, "time slice end"}, \ - {0x308, "ipl functions"}, \ - {0x500, "kvm hypercall"}, \ - {0x501, "kvm breakpoint"} +TRACE_EVENT(kvm_s390_handle_sigp_pei, + TP_PROTO(VCPU_PROTO_COMMON, __u8 order_code, __u16 cpu_addr), + TP_ARGS(VCPU_ARGS_COMMON, order_code, cpu_addr), + + TP_STRUCT__entry( + VCPU_FIELD_COMMON + __field(__u8, order_code) + __field(__u16, cpu_addr) + ), + + TP_fast_assign( + VCPU_ASSIGN_COMMON + __entry->order_code = order_code; + __entry->cpu_addr = cpu_addr; + ), + + VCPU_TP_PRINTK("handle sigp pei order %02x (%s), cpu address %04x", + __entry->order_code, + __print_symbolic(__entry->order_code, + sigp_order_codes), + __entry->cpu_addr) + ); TRACE_EVENT(kvm_s390_handle_diag, TP_PROTO(VCPU_PROTO_COMMON, __u16 code), @@ -301,6 +305,31 @@ TRACE_EVENT(kvm_s390_handle_lctl, __entry->reg1, __entry->reg3, __entry->addr) ); +TRACE_EVENT(kvm_s390_handle_stctl, + TP_PROTO(VCPU_PROTO_COMMON, int g, int reg1, int reg3, u64 addr), + TP_ARGS(VCPU_ARGS_COMMON, g, reg1, reg3, addr), + + TP_STRUCT__entry( + VCPU_FIELD_COMMON + __field(int, g) + __field(int, reg1) + __field(int, reg3) + __field(u64, addr) + ), + + TP_fast_assign( + VCPU_ASSIGN_COMMON + __entry->g = g; + __entry->reg1 = reg1; + __entry->reg3 = reg3; + __entry->addr = addr; + ), + + VCPU_TP_PRINTK("%s: storing cr %x-%x to %016llx", + __entry->g ? "stctg" : "stctl", + __entry->reg1, __entry->reg3, __entry->addr) + ); + TRACE_EVENT(kvm_s390_handle_prefix, TP_PROTO(VCPU_PROTO_COMMON, int set, u32 address), TP_ARGS(VCPU_ARGS_COMMON, set, address), diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index f709983f41f8..5b0e445bc3f3 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -26,83 +26,81 @@ __setup("spin_retry=", spin_retry_setup); void arch_spin_lock_wait(arch_spinlock_t *lp) { - int count = spin_retry; - unsigned int cpu = ~smp_processor_id(); + unsigned int cpu = SPINLOCK_LOCKVAL; unsigned int owner; + int count; while (1) { - owner = lp->owner_cpu; - if (!owner || smp_vcpu_scheduled(~owner)) { - for (count = spin_retry; count > 0; count--) { - if (arch_spin_is_locked(lp)) - continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, - cpu) == 0) - return; - } - if (MACHINE_IS_LPAR) - continue; + owner = ACCESS_ONCE(lp->lock); + /* Try to get the lock if it is free. */ + if (!owner) { + if (_raw_compare_and_swap(&lp->lock, 0, cpu)) + return; + continue; } - owner = lp->owner_cpu; - if (owner) + /* Check if the lock owner is running. */ + if (!smp_vcpu_scheduled(~owner)) { + smp_yield_cpu(~owner); + continue; + } + /* Loop for a while on the lock value. */ + count = spin_retry; + do { + owner = ACCESS_ONCE(lp->lock); + } while (owner && count-- > 0); + if (!owner) + continue; + /* + * For multiple layers of hypervisors, e.g. z/VM + LPAR + * yield the CPU if the lock is still unavailable. + */ + if (!MACHINE_IS_LPAR) smp_yield_cpu(~owner); - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) - return; } } EXPORT_SYMBOL(arch_spin_lock_wait); void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags) { - int count = spin_retry; - unsigned int cpu = ~smp_processor_id(); + unsigned int cpu = SPINLOCK_LOCKVAL; unsigned int owner; + int count; local_irq_restore(flags); while (1) { - owner = lp->owner_cpu; - if (!owner || smp_vcpu_scheduled(~owner)) { - for (count = spin_retry; count > 0; count--) { - if (arch_spin_is_locked(lp)) - continue; - local_irq_disable(); - if (_raw_compare_and_swap(&lp->owner_cpu, 0, - cpu) == 0) - return; - local_irq_restore(flags); - } - if (MACHINE_IS_LPAR) - continue; + owner = ACCESS_ONCE(lp->lock); + /* Try to get the lock if it is free. */ + if (!owner) { + local_irq_disable(); + if (_raw_compare_and_swap(&lp->lock, 0, cpu)) + return; + local_irq_restore(flags); } - owner = lp->owner_cpu; - if (owner) + /* Check if the lock owner is running. */ + if (!smp_vcpu_scheduled(~owner)) { smp_yield_cpu(~owner); - local_irq_disable(); - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) - return; - local_irq_restore(flags); - } -} -EXPORT_SYMBOL(arch_spin_lock_wait_flags); - -int arch_spin_trylock_retry(arch_spinlock_t *lp) -{ - unsigned int cpu = ~smp_processor_id(); - int count; - - for (count = spin_retry; count > 0; count--) { - if (arch_spin_is_locked(lp)) continue; - if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) - return 1; + } + /* Loop for a while on the lock value. */ + count = spin_retry; + do { + owner = ACCESS_ONCE(lp->lock); + } while (owner && count-- > 0); + if (!owner) + continue; + /* + * For multiple layers of hypervisors, e.g. z/VM + LPAR + * yield the CPU if the lock is still unavailable. + */ + if (!MACHINE_IS_LPAR) + smp_yield_cpu(~owner); } - return 0; } -EXPORT_SYMBOL(arch_spin_trylock_retry); +EXPORT_SYMBOL(arch_spin_lock_wait_flags); -void arch_spin_relax(arch_spinlock_t *lock) +void arch_spin_relax(arch_spinlock_t *lp) { - unsigned int cpu = lock->owner_cpu; + unsigned int cpu = lp->lock; if (cpu != 0) { if (MACHINE_IS_VM || MACHINE_IS_KVM || !smp_vcpu_scheduled(~cpu)) @@ -111,6 +109,17 @@ void arch_spin_relax(arch_spinlock_t *lock) } EXPORT_SYMBOL(arch_spin_relax); +int arch_spin_trylock_retry(arch_spinlock_t *lp) +{ + int count; + + for (count = spin_retry; count > 0; count--) + if (arch_spin_trylock_once(lp)) + return 1; + return 0; +} +EXPORT_SYMBOL(arch_spin_trylock_retry); + void _raw_read_lock_wait(arch_rwlock_t *rw) { unsigned int old; @@ -121,10 +130,10 @@ void _raw_read_lock_wait(arch_rwlock_t *rw) smp_yield(); count = spin_retry; } - if (!arch_read_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if ((int) old < 0) continue; - old = rw->lock & 0x7fffffffU; - if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) + if (_raw_compare_and_swap(&rw->lock, old, old + 1)) return; } } @@ -141,12 +150,13 @@ void _raw_read_lock_wait_flags(arch_rwlock_t *rw, unsigned long flags) smp_yield(); count = spin_retry; } - if (!arch_read_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if ((int) old < 0) continue; - old = rw->lock & 0x7fffffffU; local_irq_disable(); - if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) + if (_raw_compare_and_swap(&rw->lock, old, old + 1)) return; + local_irq_restore(flags); } } EXPORT_SYMBOL(_raw_read_lock_wait_flags); @@ -157,10 +167,10 @@ int _raw_read_trylock_retry(arch_rwlock_t *rw) int count = spin_retry; while (count-- > 0) { - if (!arch_read_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if ((int) old < 0) continue; - old = rw->lock & 0x7fffffffU; - if (_raw_compare_and_swap(&rw->lock, old, old + 1) == old) + if (_raw_compare_and_swap(&rw->lock, old, old + 1)) return 1; } return 0; @@ -169,6 +179,7 @@ EXPORT_SYMBOL(_raw_read_trylock_retry); void _raw_write_lock_wait(arch_rwlock_t *rw) { + unsigned int old; int count = spin_retry; while (1) { @@ -176,9 +187,10 @@ void _raw_write_lock_wait(arch_rwlock_t *rw) smp_yield(); count = spin_retry; } - if (!arch_write_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if (old) continue; - if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) + if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000)) return; } } @@ -186,6 +198,7 @@ EXPORT_SYMBOL(_raw_write_lock_wait); void _raw_write_lock_wait_flags(arch_rwlock_t *rw, unsigned long flags) { + unsigned int old; int count = spin_retry; local_irq_restore(flags); @@ -194,23 +207,27 @@ void _raw_write_lock_wait_flags(arch_rwlock_t *rw, unsigned long flags) smp_yield(); count = spin_retry; } - if (!arch_write_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if (old) continue; local_irq_disable(); - if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) + if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000)) return; + local_irq_restore(flags); } } EXPORT_SYMBOL(_raw_write_lock_wait_flags); int _raw_write_trylock_retry(arch_rwlock_t *rw) { + unsigned int old; int count = spin_retry; while (count-- > 0) { - if (!arch_write_can_lock(rw)) + old = ACCESS_ONCE(rw->lock); + if (old) continue; - if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0) + if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000)) return 1; } return 0; diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c index 7416efe8eae4..53dd5d7a0c96 100644 --- a/arch/s390/lib/uaccess.c +++ b/arch/s390/lib/uaccess.c @@ -76,7 +76,7 @@ static inline unsigned long copy_from_user_mvcp(void *x, const void __user *ptr, { unsigned long tmp1, tmp2; - update_primary_asce(current); + load_kernel_asce(); tmp1 = -256UL; asm volatile( " sacf 0\n" @@ -159,7 +159,7 @@ static inline unsigned long copy_to_user_mvcs(void __user *ptr, const void *x, { unsigned long tmp1, tmp2; - update_primary_asce(current); + load_kernel_asce(); tmp1 = -256UL; asm volatile( " sacf 0\n" @@ -225,7 +225,7 @@ static inline unsigned long copy_in_user_mvc(void __user *to, const void __user { unsigned long tmp1; - update_primary_asce(current); + load_kernel_asce(); asm volatile( " sacf 256\n" " "AHI" %0,-1\n" @@ -292,7 +292,7 @@ static inline unsigned long clear_user_xc(void __user *to, unsigned long size) { unsigned long tmp1, tmp2; - update_primary_asce(current); + load_kernel_asce(); asm volatile( " sacf 256\n" " "AHI" %0,-1\n" @@ -358,7 +358,7 @@ unsigned long __strnlen_user(const char __user *src, unsigned long size) { if (unlikely(!size)) return 0; - update_primary_asce(current); + load_kernel_asce(); return strnlen_user_srst(src, size); } EXPORT_SYMBOL(__strnlen_user); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 2f51a998a67e..3f3b35403d0a 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -415,7 +415,7 @@ static inline int do_exception(struct pt_regs *regs, int access) * The instruction that caused the program check has * been nullified. Don't signal single step via SIGTRAP. */ - clear_tsk_thread_flag(tsk, TIF_PER_TRAP); + clear_pt_regs_flag(regs, PIF_PER_TRAP); if (notify_page_fault(regs)) return 0; diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c index 0727a55d87d9..0ff66a7e29bb 100644 --- a/arch/s390/mm/hugetlbpage.c +++ b/arch/s390/mm/hugetlbpage.c @@ -220,11 +220,6 @@ int pud_huge(pud_t pud) return 0; } -int pmd_huge_support(void) -{ - return 1; -} - struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmdp, int write) { diff --git a/arch/s390/mm/mem_detect.c b/arch/s390/mm/mem_detect.c index cca388253a39..5535cfe0ee11 100644 --- a/arch/s390/mm/mem_detect.c +++ b/arch/s390/mm/mem_detect.c @@ -6,130 +6,60 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/memblock.h> +#include <linux/init.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> #include <asm/ipl.h> #include <asm/sclp.h> #include <asm/setup.h> #define ADDR2G (1ULL << 31) -static void find_memory_chunks(struct mem_chunk chunk[], unsigned long maxsize) +#define CHUNK_READ_WRITE 0 +#define CHUNK_READ_ONLY 1 + +static inline void memblock_physmem_add(phys_addr_t start, phys_addr_t size) +{ + memblock_add_range(&memblock.memory, start, size, 0, 0); + memblock_add_range(&memblock.physmem, start, size, 0, 0); +} + +void __init detect_memory_memblock(void) { unsigned long long memsize, rnmax, rzm; - unsigned long addr = 0, size; - int i = 0, type; + unsigned long addr, size; + int type; rzm = sclp_get_rzm(); rnmax = sclp_get_rnmax(); memsize = rzm * rnmax; if (!rzm) rzm = 1ULL << 17; - if (sizeof(long) == 4) { + if (IS_ENABLED(CONFIG_32BIT)) { rzm = min(ADDR2G, rzm); - memsize = memsize ? min(ADDR2G, memsize) : ADDR2G; + memsize = min(ADDR2G, memsize); } - if (maxsize) - memsize = memsize ? min((unsigned long)memsize, maxsize) : maxsize; + max_physmem_end = memsize; + addr = 0; + /* keep memblock lists close to the kernel */ + memblock_set_bottom_up(true); do { size = 0; type = tprot(addr); do { size += rzm; - if (memsize && addr + size >= memsize) + if (max_physmem_end && addr + size >= max_physmem_end) break; } while (type == tprot(addr + size)); if (type == CHUNK_READ_WRITE || type == CHUNK_READ_ONLY) { - if (memsize && (addr + size > memsize)) - size = memsize - addr; - chunk[i].addr = addr; - chunk[i].size = size; - chunk[i].type = type; - i++; + if (max_physmem_end && (addr + size > max_physmem_end)) + size = max_physmem_end - addr; + memblock_physmem_add(addr, size); } addr += size; - } while (addr < memsize && i < MEMORY_CHUNKS); -} - -/** - * detect_memory_layout - fill mem_chunk array with memory layout data - * @chunk: mem_chunk array to be filled - * @maxsize: maximum address where memory detection should stop - * - * Fills the passed in memory chunk array with the memory layout of the - * machine. The array must have a size of at least MEMORY_CHUNKS and will - * be fully initialized afterwards. - * If the maxsize paramater has a value > 0 memory detection will stop at - * that address. It is guaranteed that all chunks have an ending address - * that is smaller than maxsize. - * If maxsize is 0 all memory will be detected. - */ -void detect_memory_layout(struct mem_chunk chunk[], unsigned long maxsize) -{ - unsigned long flags, flags_dat, cr0; - - memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk)); - /* - * Disable IRQs, DAT and low address protection so tprot does the - * right thing and we don't get scheduled away with low address - * protection disabled. - */ - local_irq_save(flags); - flags_dat = __arch_local_irq_stnsm(0xfb); - /* - * In case DAT was enabled, make sure chunk doesn't reside in vmalloc - * space. We have disabled DAT and any access to vmalloc area will - * cause an exception. - * If DAT was disabled we are called from early ipl code. - */ - if (test_bit(5, &flags_dat)) { - if (WARN_ON_ONCE(is_vmalloc_or_module_addr(chunk))) - goto out; - } - __ctl_store(cr0, 0, 0); - __ctl_clear_bit(0, 28); - find_memory_chunks(chunk, maxsize); - __ctl_load(cr0, 0, 0); -out: - __arch_local_irq_ssm(flags_dat); - local_irq_restore(flags); -} -EXPORT_SYMBOL(detect_memory_layout); - -/* - * Create memory hole with given address and size. - */ -void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr, - unsigned long size) -{ - int i; - - for (i = 0; i < MEMORY_CHUNKS; i++) { - struct mem_chunk *chunk = &mem_chunk[i]; - - if (chunk->size == 0) - continue; - if (addr > chunk->addr + chunk->size) - continue; - if (addr + size <= chunk->addr) - continue; - /* Split */ - if ((addr > chunk->addr) && - (addr + size < chunk->addr + chunk->size)) { - struct mem_chunk *new = chunk + 1; - - memmove(new, chunk, (MEMORY_CHUNKS-i-1) * sizeof(*new)); - new->addr = addr + size; - new->size = chunk->addr + chunk->size - new->addr; - chunk->size = addr - chunk->addr; - continue; - } else if ((addr <= chunk->addr) && - (addr + size >= chunk->addr + chunk->size)) { - memmove(chunk, chunk + 1, (MEMORY_CHUNKS-i-1) * sizeof(*chunk)); - memset(&mem_chunk[MEMORY_CHUNKS-1], 0, sizeof(*chunk)); - } else if (addr + size < chunk->addr + chunk->size) { - chunk->size = chunk->addr + chunk->size - addr - size; - chunk->addr = addr + size; - } else if (addr > chunk->addr) { - chunk->size = addr - chunk->addr; - } - } + } while (addr < max_physmem_end); + memblock_set_bottom_up(false); + if (!max_physmem_end) + max_physmem_end = memblock_end_of_DRAM(); } diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c index 27c50f4d90cb..a90d45e9dfb0 100644 --- a/arch/s390/mm/page-states.c +++ b/arch/s390/mm/page-states.c @@ -12,8 +12,6 @@ #include <linux/mm.h> #include <linux/gfp.h> #include <linux/init.h> -#include <asm/setup.h> -#include <asm/ipl.h> #define ESSA_SET_STABLE 1 #define ESSA_SET_UNUSED 2 @@ -43,14 +41,6 @@ void __init cmma_init(void) if (!cmma_flag) return; - /* - * Disable CMM for dump, otherwise the tprot based memory - * detection can fail because of unstable pages. - */ - if (OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP) { - cmma_flag = 0; - return; - } asm volatile( " .insn rrf,0xb9ab0000,%1,%1,0,0\n" "0: la %0,0\n" diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index d7cfd57815fb..37b8241ec784 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -53,8 +53,10 @@ static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; - if (current->active_mm == mm) - update_user_asce(mm, 1); + if (current->active_mm == mm) { + clear_user_asce(); + set_user_asce(mm); + } __tlb_flush_local(); } @@ -108,7 +110,7 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit) pgd_t *pgd; if (current->active_mm == mm) { - clear_user_asce(mm, 1); + clear_user_asce(); __tlb_flush_mm(mm); } while (mm->context.asce_limit > limit) { @@ -134,7 +136,7 @@ void crst_table_downgrade(struct mm_struct *mm, unsigned long limit) crst_table_free(mm, (unsigned long *) pgd); } if (current->active_mm == mm) - update_user_asce(mm, 1); + set_user_asce(mm); } #endif @@ -832,6 +834,7 @@ void gmap_do_ipte_notify(struct mm_struct *mm, pte_t *pte) } spin_unlock(&gmap_notifier_lock); } +EXPORT_SYMBOL_GPL(gmap_do_ipte_notify); static inline int page_table_with_pgste(struct page *page) { @@ -864,8 +867,7 @@ static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm, atomic_set(&page->_mapcount, 0); table = (unsigned long *) page_to_phys(page); clear_table(table, _PAGE_INVALID, PAGE_SIZE/2); - clear_table(table + PTRS_PER_PTE, PGSTE_HR_BIT | PGSTE_HC_BIT, - PAGE_SIZE/2); + clear_table(table + PTRS_PER_PTE, 0, PAGE_SIZE/2); return table; } @@ -883,8 +885,8 @@ static inline void page_table_free_pgste(unsigned long *table) __free_page(page); } -static inline unsigned long page_table_reset_pte(struct mm_struct *mm, - pmd_t *pmd, unsigned long addr, unsigned long end) +static inline unsigned long page_table_reset_pte(struct mm_struct *mm, pmd_t *pmd, + unsigned long addr, unsigned long end, bool init_skey) { pte_t *start_pte, *pte; spinlock_t *ptl; @@ -895,6 +897,22 @@ static inline unsigned long page_table_reset_pte(struct mm_struct *mm, do { pgste = pgste_get_lock(pte); pgste_val(pgste) &= ~_PGSTE_GPS_USAGE_MASK; + if (init_skey) { + unsigned long address; + + pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT | + PGSTE_GR_BIT | PGSTE_GC_BIT); + + /* skip invalid and not writable pages */ + if (pte_val(*pte) & _PAGE_INVALID || + !(pte_val(*pte) & _PAGE_WRITE)) { + pgste_set_unlock(pte, pgste); + continue; + } + + address = pte_val(*pte) & PAGE_MASK; + page_set_storage_key(address, PAGE_DEFAULT_KEY, 1); + } pgste_set_unlock(pte, pgste); } while (pte++, addr += PAGE_SIZE, addr != end); pte_unmap_unlock(start_pte, ptl); @@ -902,8 +920,8 @@ static inline unsigned long page_table_reset_pte(struct mm_struct *mm, return addr; } -static inline unsigned long page_table_reset_pmd(struct mm_struct *mm, - pud_t *pud, unsigned long addr, unsigned long end) +static inline unsigned long page_table_reset_pmd(struct mm_struct *mm, pud_t *pud, + unsigned long addr, unsigned long end, bool init_skey) { unsigned long next; pmd_t *pmd; @@ -913,14 +931,14 @@ static inline unsigned long page_table_reset_pmd(struct mm_struct *mm, next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) continue; - next = page_table_reset_pte(mm, pmd, addr, next); + next = page_table_reset_pte(mm, pmd, addr, next, init_skey); } while (pmd++, addr = next, addr != end); return addr; } -static inline unsigned long page_table_reset_pud(struct mm_struct *mm, - pgd_t *pgd, unsigned long addr, unsigned long end) +static inline unsigned long page_table_reset_pud(struct mm_struct *mm, pgd_t *pgd, + unsigned long addr, unsigned long end, bool init_skey) { unsigned long next; pud_t *pud; @@ -930,28 +948,33 @@ static inline unsigned long page_table_reset_pud(struct mm_struct *mm, next = pud_addr_end(addr, end); if (pud_none_or_clear_bad(pud)) continue; - next = page_table_reset_pmd(mm, pud, addr, next); + next = page_table_reset_pmd(mm, pud, addr, next, init_skey); } while (pud++, addr = next, addr != end); return addr; } -void page_table_reset_pgste(struct mm_struct *mm, - unsigned long start, unsigned long end) +void page_table_reset_pgste(struct mm_struct *mm, unsigned long start, + unsigned long end, bool init_skey) { unsigned long addr, next; pgd_t *pgd; + down_write(&mm->mmap_sem); + if (init_skey && mm_use_skey(mm)) + goto out_up; addr = start; - down_read(&mm->mmap_sem); pgd = pgd_offset(mm, addr); do { next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) continue; - next = page_table_reset_pud(mm, pgd, addr, next); + next = page_table_reset_pud(mm, pgd, addr, next, init_skey); } while (pgd++, addr = next, addr != end); - up_read(&mm->mmap_sem); + if (init_skey) + current->mm->context.use_skey = 1; +out_up: + up_write(&mm->mmap_sem); } EXPORT_SYMBOL(page_table_reset_pgste); @@ -989,7 +1012,7 @@ int set_guest_storage_key(struct mm_struct *mm, unsigned long addr, /* changing the guest storage key is considered a change of the page */ if ((pgste_val(new) ^ pgste_val(old)) & (PGSTE_ACC_BITS | PGSTE_FP_BIT | PGSTE_GR_BIT | PGSTE_GC_BIT)) - pgste_val(new) |= PGSTE_HC_BIT; + pgste_val(new) |= PGSTE_UC_BIT; pgste_set_unlock(ptep, new); pte_unmap_unlock(*ptep, ptl); @@ -1011,6 +1034,11 @@ static inline unsigned long *page_table_alloc_pgste(struct mm_struct *mm, return NULL; } +void page_table_reset_pgste(struct mm_struct *mm, unsigned long start, + unsigned long end, bool init_skey) +{ +} + static inline void page_table_free_pgste(unsigned long *table) { } @@ -1357,6 +1385,37 @@ int s390_enable_sie(void) } EXPORT_SYMBOL_GPL(s390_enable_sie); +/* + * Enable storage key handling from now on and initialize the storage + * keys with the default key. + */ +void s390_enable_skey(void) +{ + page_table_reset_pgste(current->mm, 0, TASK_SIZE, true); +} +EXPORT_SYMBOL_GPL(s390_enable_skey); + +/* + * Test and reset if a guest page is dirty + */ +bool gmap_test_and_clear_dirty(unsigned long address, struct gmap *gmap) +{ + pte_t *pte; + spinlock_t *ptl; + bool dirty = false; + + pte = get_locked_pte(gmap->mm, address, &ptl); + if (unlikely(!pte)) + return false; + + if (ptep_test_and_clear_user_dirty(gmap->mm, address, pte)) + dirty = true; + + spin_unlock(ptl); + return dirty; +} +EXPORT_SYMBOL_GPL(gmap_test_and_clear_dirty); + #ifdef CONFIG_TRANSPARENT_HUGEPAGE int pmdp_clear_flush_young(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp) diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index 72b04de18283..fe9012a49aa5 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -10,6 +10,7 @@ #include <linux/list.h> #include <linux/hugetlb.h> #include <linux/slab.h> +#include <linux/memblock.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/setup.h> @@ -66,7 +67,8 @@ static pte_t __ref *vmem_pte_alloc(unsigned long address) if (slab_is_available()) pte = (pte_t *) page_table_alloc(&init_mm, address); else - pte = alloc_bootmem(PTRS_PER_PTE * sizeof(pte_t)); + pte = alloc_bootmem_align(PTRS_PER_PTE * sizeof(pte_t), + PTRS_PER_PTE * sizeof(pte_t)); if (!pte) return NULL; clear_table((unsigned long *) pte, _PAGE_INVALID, @@ -371,16 +373,14 @@ out: void __init vmem_map_init(void) { unsigned long ro_start, ro_end; - unsigned long start, end; - int i; + struct memblock_region *reg; + phys_addr_t start, end; ro_start = PFN_ALIGN((unsigned long)&_stext); ro_end = (unsigned long)&_eshared & PAGE_MASK; - for (i = 0; i < MEMORY_CHUNKS; i++) { - if (!memory_chunk[i].size) - continue; - start = memory_chunk[i].addr; - end = memory_chunk[i].addr + memory_chunk[i].size; + for_each_memblock(memory, reg) { + start = reg->base; + end = reg->base + reg->size - 1; if (start >= ro_end || end <= ro_start) vmem_add_mem(start, end - start, 0); else if (start >= ro_start && end <= ro_end) @@ -400,23 +400,21 @@ void __init vmem_map_init(void) } /* - * Convert memory chunk array to a memory segment list so there is a single - * list that contains both r/w memory and shared memory segments. + * Convert memblock.memory to a memory segment list so there is a single + * list that contains all memory segments. */ static int __init vmem_convert_memory_chunk(void) { + struct memblock_region *reg; struct memory_segment *seg; - int i; mutex_lock(&vmem_mutex); - for (i = 0; i < MEMORY_CHUNKS; i++) { - if (!memory_chunk[i].size) - continue; + for_each_memblock(memory, reg) { seg = kzalloc(sizeof(*seg), GFP_KERNEL); if (!seg) panic("Out of memory...\n"); - seg->start = memory_chunk[i].addr; - seg->size = memory_chunk[i].size; + seg->start = reg->base; + seg->size = reg->size; insert_memory_segment(seg); } mutex_unlock(&vmem_mutex); diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 452d3ebd9d0f..e9f8fa9337fe 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -811,7 +811,7 @@ static struct bpf_binary_header *bpf_alloc_binary(unsigned int bpfsize, return NULL; memset(header, 0, sz); header->pages = sz / PAGE_SIZE; - hole = sz - (bpfsize + sizeof(*header)); + hole = min(sz - (bpfsize + sizeof(*header)), PAGE_SIZE - sizeof(*header)); /* Insert random number of illegal instructions before BPF code * and make sure the first instruction starts at an even address. */ diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 276f2e26c761..e53c6f268807 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -209,13 +209,11 @@ static void init_all_cpu_buffers(void) } } -static int prepare_cpu_buffers(void) +static void prepare_cpu_buffers(void) { - int cpu; - int rc; struct hws_cpu_buffer *cb; + int cpu; - rc = 0; for_each_online_cpu(cpu) { cb = &per_cpu(sampler_cpu_buffer, cpu); atomic_set(&cb->ext_params, 0); @@ -230,8 +228,6 @@ static int prepare_cpu_buffers(void) cb->oom = 0; cb->stop_mode = 0; } - - return rc; } /* @@ -1107,9 +1103,7 @@ int hwsampler_start_all(unsigned long rate) if (rc) goto start_all_exit; - rc = prepare_cpu_buffers(); - if (rc) - goto start_all_exit; + prepare_cpu_buffers(); for_each_online_cpu(cpu) { rc = start_sampling(cpu); @@ -1156,7 +1150,7 @@ int hwsampler_stop_all(void) rc = 0; if (hws_state == HWS_INIT) { mutex_unlock(&hws_sem); - return rc; + return 0; } hws_state = HWS_STOPPING; mutex_unlock(&hws_sem); diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c index 1df1d29ac81d..9ddc51eeb8d6 100644 --- a/arch/s390/pci/pci.c +++ b/arch/s390/pci/pci.c @@ -401,11 +401,11 @@ static void zpci_irq_handler(struct airq_struct *airq) int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) { struct zpci_dev *zdev = get_zdev(pdev); - unsigned int hwirq, irq, msi_vecs; + unsigned int hwirq, msi_vecs; unsigned long aisb; struct msi_desc *msi; struct msi_msg msg; - int rc; + int rc, irq; if (type == PCI_CAP_ID_MSI && nvec > 1) return 1; @@ -433,7 +433,7 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) list_for_each_entry(msi, &pdev->msi_list, list) { rc = -EIO; irq = irq_alloc_desc(0); /* Alloc irq on node 0 */ - if (irq == NO_IRQ) + if (irq < 0) goto out_msi; rc = irq_set_msi_desc(irq, msi); if (rc) @@ -530,11 +530,6 @@ static void zpci_unmap_resources(struct zpci_dev *zdev) } } -int pcibios_add_platform_entries(struct pci_dev *pdev) -{ - return zpci_sysfs_add_device(&pdev->dev); -} - static int __init zpci_irq_init(void) { int rc; @@ -671,6 +666,7 @@ int pcibios_add_device(struct pci_dev *pdev) int i; zdev->pdev = pdev; + pdev->dev.groups = zpci_attr_groups; zpci_map_resources(zdev); for (i = 0; i < PCI_BAR_COUNT; i++) { diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c index c747394029ee..96545d7659fd 100644 --- a/arch/s390/pci/pci_clp.c +++ b/arch/s390/pci/pci_clp.c @@ -114,6 +114,16 @@ static int clp_store_query_pci_fn(struct zpci_dev *zdev, zdev->end_dma = response->edma; zdev->pchid = response->pchid; zdev->pfgid = response->pfgid; + zdev->pft = response->pft; + zdev->vfn = response->vfn; + zdev->uid = response->uid; + + memcpy(zdev->pfip, response->pfip, sizeof(zdev->pfip)); + if (response->util_str_avail) { + memcpy(zdev->util_str, response->util_str, + sizeof(zdev->util_str)); + } + return 0; } diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c index 01e251b1da0c..6d7f5a3016ca 100644 --- a/arch/s390/pci/pci_event.c +++ b/arch/s390/pci/pci_event.c @@ -76,7 +76,7 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) switch (ccdf->pec) { case 0x0301: /* Standby -> Configured */ - if (!zdev || zdev->state == ZPCI_FN_STATE_CONFIGURED) + if (!zdev || zdev->state != ZPCI_FN_STATE_STANDBY) break; zdev->state = ZPCI_FN_STATE_CONFIGURED; zdev->fh = ccdf->fh; @@ -86,7 +86,8 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf) pci_rescan_bus(zdev->bus); break; case 0x0302: /* Reserved -> Standby */ - clp_add_pci_device(ccdf->fid, ccdf->fh, 0); + if (!zdev) + clp_add_pci_device(ccdf->fid, ccdf->fh, 0); break; case 0x0303: /* Deconfiguration requested */ if (pdev) diff --git a/arch/s390/pci/pci_sysfs.c b/arch/s390/pci/pci_sysfs.c index ab4a91393005..9190214b8702 100644 --- a/arch/s390/pci/pci_sysfs.c +++ b/arch/s390/pci/pci_sysfs.c @@ -12,43 +12,29 @@ #include <linux/stat.h> #include <linux/pci.h> -static ssize_t show_fid(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); - - return sprintf(buf, "0x%08x\n", zdev->fid); -} -static DEVICE_ATTR(function_id, S_IRUGO, show_fid, NULL); - -static ssize_t show_fh(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); - - return sprintf(buf, "0x%08x\n", zdev->fh); -} -static DEVICE_ATTR(function_handle, S_IRUGO, show_fh, NULL); - -static ssize_t show_pchid(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); - - return sprintf(buf, "0x%04x\n", zdev->pchid); -} -static DEVICE_ATTR(pchid, S_IRUGO, show_pchid, NULL); - -static ssize_t show_pfgid(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); - - return sprintf(buf, "0x%02x\n", zdev->pfgid); -} -static DEVICE_ATTR(pfgid, S_IRUGO, show_pfgid, NULL); - -static ssize_t store_recover(struct device *dev, struct device_attribute *attr, +#define zpci_attr(name, fmt, member) \ +static ssize_t name##_show(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct zpci_dev *zdev = get_zdev(to_pci_dev(dev)); \ + \ + return sprintf(buf, fmt, zdev->member); \ +} \ +static DEVICE_ATTR_RO(name) + +zpci_attr(function_id, "0x%08x\n", fid); +zpci_attr(function_handle, "0x%08x\n", fh); +zpci_attr(pchid, "0x%04x\n", pchid); +zpci_attr(pfgid, "0x%02x\n", pfgid); +zpci_attr(vfn, "0x%04x\n", vfn); +zpci_attr(pft, "0x%02x\n", pft); +zpci_attr(uid, "0x%x\n", uid); +zpci_attr(segment0, "0x%02x\n", pfip[0]); +zpci_attr(segment1, "0x%02x\n", pfip[1]); +zpci_attr(segment2, "0x%02x\n", pfip[2]); +zpci_attr(segment3, "0x%02x\n", pfip[3]); + +static ssize_t recover_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct pci_dev *pdev = to_pci_dev(dev); @@ -70,38 +56,55 @@ static ssize_t store_recover(struct device *dev, struct device_attribute *attr, pci_rescan_bus(zdev->bus); return count; } -static DEVICE_ATTR(recover, S_IWUSR, NULL, store_recover); +static DEVICE_ATTR_WO(recover); -static struct device_attribute *zpci_dev_attrs[] = { - &dev_attr_function_id, - &dev_attr_function_handle, - &dev_attr_pchid, - &dev_attr_pfgid, - &dev_attr_recover, - NULL, -}; - -int zpci_sysfs_add_device(struct device *dev) +static ssize_t util_string_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, char *buf, + loff_t off, size_t count) { - int i, rc = 0; - - for (i = 0; zpci_dev_attrs[i]; i++) { - rc = device_create_file(dev, zpci_dev_attrs[i]); - if (rc) - goto error; - } - return 0; + struct device *dev = kobj_to_dev(kobj); + struct pci_dev *pdev = to_pci_dev(dev); + struct zpci_dev *zdev = get_zdev(pdev); -error: - while (--i >= 0) - device_remove_file(dev, zpci_dev_attrs[i]); - return rc; + return memory_read_from_buffer(buf, count, &off, zdev->util_str, + sizeof(zdev->util_str)); } +static BIN_ATTR_RO(util_string, CLP_UTIL_STR_LEN); +static struct bin_attribute *zpci_bin_attrs[] = { + &bin_attr_util_string, + NULL, +}; -void zpci_sysfs_remove_device(struct device *dev) -{ - int i; +static struct attribute *zpci_dev_attrs[] = { + &dev_attr_function_id.attr, + &dev_attr_function_handle.attr, + &dev_attr_pchid.attr, + &dev_attr_pfgid.attr, + &dev_attr_pft.attr, + &dev_attr_vfn.attr, + &dev_attr_uid.attr, + &dev_attr_recover.attr, + NULL, +}; +static struct attribute_group zpci_attr_group = { + .attrs = zpci_dev_attrs, + .bin_attrs = zpci_bin_attrs, +}; - for (i = 0; zpci_dev_attrs[i]; i++) - device_remove_file(dev, zpci_dev_attrs[i]); -} +static struct attribute *pfip_attrs[] = { + &dev_attr_segment0.attr, + &dev_attr_segment1.attr, + &dev_attr_segment2.attr, + &dev_attr_segment3.attr, + NULL, +}; +static struct attribute_group pfip_attr_group = { + .name = "pfip", + .attrs = pfip_attrs, +}; + +const struct attribute_group *zpci_attr_groups[] = { + &zpci_attr_group, + &pfip_attr_group, + NULL, +}; diff --git a/arch/score/include/asm/bitops.h b/arch/score/include/asm/bitops.h index a304096b1894..c1bf8d6d0fb0 100644 --- a/arch/score/include/asm/bitops.h +++ b/arch/score/include/asm/bitops.h @@ -2,12 +2,7 @@ #define _ASM_SCORE_BITOPS_H #include <asm/byteorder.h> /* swab32 */ - -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() +#include <asm/barrier.h> #include <asm-generic/bitops.h> #include <asm-generic/bitops/__fls.h> diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index 95ae23fcfdd6..ec70475da890 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -93,7 +93,6 @@ CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig index c6c2becdc8ab..0b364e3b0ff8 100644 --- a/arch/sh/configs/ecovec24_defconfig +++ b/arch/sh/configs/ecovec24_defconfig @@ -107,7 +107,6 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_SH4_FSI=y CONFIG_SND_FSI_DA7210=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 3670e937f2b7..6783f31315c7 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -80,7 +80,6 @@ CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 47236573db83..3c4f6f4d52b0 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -100,7 +100,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_R8A66597_HCD=y CONFIG_NEW_LEDS=y diff --git a/arch/sh/configs/rsk7264_defconfig b/arch/sh/configs/rsk7264_defconfig index 1600426224c2..eecdf65bb789 100644 --- a/arch/sh/configs/rsk7264_defconfig +++ b/arch/sh/configs/rsk7264_defconfig @@ -60,7 +60,6 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_R8A66597_HCD=y diff --git a/arch/sh/configs/rsk7269_defconfig b/arch/sh/configs/rsk7269_defconfig index 9f062b5837d7..8370b10df357 100644 --- a/arch/sh/configs/rsk7269_defconfig +++ b/arch/sh/configs/rsk7269_defconfig @@ -43,7 +43,6 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HWMON is not set CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_R8A66597_HCD=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index ae1115849dda..6a96b9a2f7a5 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -100,8 +100,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index be9c474197b3..201acb4652f7 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -92,9 +92,7 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_ISP116X_HCD=y CONFIG_UIO=y CONFIG_EXT2_FS=y diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index c8c5e7f7a68d..b0ef63ce525a 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -94,7 +94,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/sh/configs/sh2007_defconfig b/arch/sh/configs/sh2007_defconfig index 0d2f41472a19..0c08d9244c97 100644 --- a/arch/sh/configs/sh2007_defconfig +++ b/arch/sh/configs/sh2007_defconfig @@ -97,7 +97,6 @@ CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_MON=y CONFIG_NEW_LEDS=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 51561f5677d8..d29da4a0f6c2 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -88,7 +88,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_TT_NEWSCHED is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index e2cbd92d520b..a77b778c745b 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -215,7 +215,6 @@ CONFIG_WATCHDOG=y CONFIG_SH_WDT=m # CONFIG_USB_HID is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index d7f89be9f474..1e843dbed5f0 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -117,7 +117,6 @@ CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index d6cde700e316..1d1c5a227e50 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -31,6 +31,8 @@ static void gapspci_fixup_resources(struct pci_dev *dev) { struct pci_channel *p = dev->sysdata; + struct resource res; + struct pci_bus_region region; printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); @@ -50,11 +52,21 @@ static void gapspci_fixup_resources(struct pci_dev *dev) /* * Redirect dma memory allocations to special memory window. + * + * If this GAPSPCI region were mapped by a BAR, the CPU + * phys_addr_t would be pci_resource_start(), and the bus + * address would be pci_bus_address(pci_resource_start()). + * But apparently there's no BAR mapping it, so we just + * "know" its CPU address is GAPSPCI_DMA_BASE. */ + res.start = GAPSPCI_DMA_BASE; + res.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1; + res.flags = IORESOURCE_MEM; + pcibios_resource_to_bus(dev->bus, ®ion, &res); BUG_ON(!dma_declare_coherent_memory(&dev->dev, - GAPSPCI_DMA_BASE, - GAPSPCI_DMA_BASE, - GAPSPCI_DMA_SIZE, + res.start, + region.start, + resource_size(&res), DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE)); break; diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index f4c1c20bcdf6..f57b8a6743b3 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -10,6 +10,7 @@ #include <linux/compiler.h> #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } @@ -62,9 +63,4 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) return c; } -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - #endif /* __ASM_SH_ATOMIC_H */ diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h index ea8706d94f08..fc8e652cf173 100644 --- a/arch/sh/include/asm/bitops.h +++ b/arch/sh/include/asm/bitops.h @@ -9,6 +9,7 @@ /* For __swab32 */ #include <asm/byteorder.h> +#include <asm/barrier.h> #ifdef CONFIG_GUSA_RB #include <asm/bitops-grb.h> @@ -22,12 +23,6 @@ #include <asm-generic/bitops/non-atomic.h> #endif -/* - * clear_bit() doesn't provide any barrier for the compiler. - */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - #ifdef CONFIG_SUPERH32 static inline unsigned long ffz(unsigned long word) { diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index bff96c2e7d25..5b4511552998 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -70,11 +70,6 @@ extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); extern void pcibios_set_master(struct pci_dev *dev); -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* Dynamic DMA mapping stuff. * SuperH has everything mapped statically like x86. */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h index e77816c4b9bc..126fe8340b22 100644 --- a/arch/sh/include/asm/unistd.h +++ b/arch/sh/include/asm/unistd.h @@ -11,7 +11,6 @@ # define __ARCH_WANT_SYS_GETHOSTNAME # define __ARCH_WANT_SYS_IPC # define __ARCH_WANT_SYS_PAUSE -# define __ARCH_WANT_SYS_SGETMASK # define __ARCH_WANT_SYS_SIGNAL # define __ARCH_WANT_SYS_TIME # define __ARCH_WANT_SYS_UTIME diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c index f59b1f30d44b..8525a671266f 100644 --- a/arch/sh/kernel/cpu/clock-cpg.c +++ b/arch/sh/kernel/cpu/clock-cpg.c @@ -56,9 +56,13 @@ int __init __deprecated cpg_clk_init(void) clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - clk_add_alias("tmu_fck", NULL, "peripheral_clk", NULL); - clk_add_alias("mtu2_fck", NULL, "peripheral_clk", NULL); - clk_add_alias("cmt_fck", NULL, "peripheral_clk", NULL); + clk_add_alias("fck", "sh-tmu-sh3.0", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-tmu.0", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-tmu.1", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-tmu.2", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-mtu2", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-cmt-16.0", "peripheral_clk", NULL); + clk_add_alias("fck", "sh-cmt-32.0", "peripheral_clk", NULL); clk_add_alias("sci_ick", NULL, "peripheral_clk", NULL); return ret; diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index 3860b0be56c7..58c19adae900 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -152,62 +152,24 @@ static struct platform_device eth_device = { .resource = eth_resources, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, }; -static struct resource cmt0_resources[] = { - [0] = { - .start = 0xf84a0072, - .end = 0xf84a0077, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 86, - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xf84a0070, 0x10), + DEFINE_RES_IRQ(86), + DEFINE_RES_IRQ(87), }; -static struct platform_device cmt0_device = { - .name = "sh_cmt", +static struct platform_device cmt_device = { + .name = "sh-cmt-16", .id = 0, .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .channel_offset = 0x08, - .timer_bit = 1, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ -}; - -static struct resource cmt1_resources[] = { - [0] = { - .start = 0xf84a0078, - .end = 0xf84a007d, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 87, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; static struct platform_device *sh7619_devices[] __initdata = { @@ -215,8 +177,7 @@ static struct platform_device *sh7619_devices[] __initdata = { &scif1_device, &scif2_device, ð_device, - &cmt0_device, - &cmt1_device, + &cmt_device, }; static int __init sh7619_devices_setup(void) @@ -235,8 +196,7 @@ static struct platform_device *sh7619_early_devices[] __initdata = { &scif0_device, &scif1_device, &scif2_device, - &cmt0_device, - &cmt1_device, + &cmt_device, }; #define STBCR3 0xf80a0000 diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c index fdf585c95289..8638fba6cd7f 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7264.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7264.c @@ -117,9 +117,9 @@ static struct clk_lookup lookups[] = { /* MSTP clocks */ CLKDEV_CON_ID("sci_ick", &mstp_clks[MSTP77]), CLKDEV_CON_ID("vdc3", &mstp_clks[MSTP74]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP72]), + CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]), CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]), - CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP35]), + CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]), CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP34]), CLKDEV_CON_ID("sdhi1", &mstp_clks[MSTP33]), CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]), diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c index 6b787620de99..f8a5c2abdfb3 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7269.c @@ -158,9 +158,9 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]), CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]), CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP72]), + CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[MSTP72]), CLKDEV_CON_ID("usb0", &mstp_clks[MSTP60]), - CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP35]), + CLKDEV_ICK_ID("fck", "sh-mtu2", &mstp_clks[MSTP35]), CLKDEV_CON_ID("adc0", &mstp_clks[MSTP32]), CLKDEV_CON_ID("rtc0", &mstp_clks[MSTP30]), }; diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c index 63e996f9a7ed..26fcdbd4127a 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-mxg.c +++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c @@ -114,88 +114,18 @@ static struct intc_mask_reg mask_registers[] __initdata = { static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups, mask_registers, prio_registers, NULL); -static struct sh_timer_config mtu2_0_platform_data = { - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xff801000, 0x400), + DEFINE_RES_IRQ_NAMED(228, "tgi0a"), + DEFINE_RES_IRQ_NAMED(234, "tgi1a"), + DEFINE_RES_IRQ_NAMED(240, "tgi2a"), }; -static struct resource mtu2_0_resources[] = { - [0] = { - .start = 0xff801300, - .end = 0xff801326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 228, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", - .id = 0, - .dev = { - .platform_data = &mtu2_0_platform_data, - }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), -}; - -static struct sh_timer_config mtu2_1_platform_data = { - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, -}; - -static struct resource mtu2_1_resources[] = { - [0] = { - .start = 0xff801380, - .end = 0xff801390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 234, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), -}; - -static struct sh_timer_config mtu2_2_platform_data = { - .channel_offset = 0x80, - .timer_bit = 2, - .clockevent_rating = 200, -}; - -static struct resource mtu2_2_resources[] = { - [0] = { - .start = 0xff801000, - .end = 0xff80100a, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 240, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_2_device = { - .name = "sh_mtu2", - .id = 2, - .dev = { - .platform_data = &mtu2_2_platform_data, - }, - .resource = mtu2_2_resources, - .num_resources = ARRAY_SIZE(mtu2_2_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct plat_sci_port scif0_platform_data = { @@ -221,9 +151,7 @@ static struct platform_device scif0_device = { static struct platform_device *mxg_devices[] __initdata = { &scif0_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &mtu2_device, }; static int __init mxg_devices_setup(void) @@ -240,9 +168,7 @@ void __init plat_irq_setup(void) static struct platform_device *mxg_early_devices[] __initdata = { &scif0_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &mtu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c index 2c6874461536..abc0ce9fb800 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7201.c @@ -365,88 +365,18 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; -static struct sh_timer_config mtu2_0_platform_data = { - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xfffe4000, 0x400), + DEFINE_RES_IRQ_NAMED(108, "tgi0a"), + DEFINE_RES_IRQ_NAMED(116, "tgi1a"), + DEFINE_RES_IRQ_NAMED(124, "tgi1b"), }; -static struct resource mtu2_0_resources[] = { - [0] = { - .start = 0xfffe4300, - .end = 0xfffe4326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 108, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", - .id = 0, - .dev = { - .platform_data = &mtu2_0_platform_data, - }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), -}; - -static struct sh_timer_config mtu2_1_platform_data = { - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, -}; - -static struct resource mtu2_1_resources[] = { - [0] = { - .start = 0xfffe4380, - .end = 0xfffe4390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 116, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), -}; - -static struct sh_timer_config mtu2_2_platform_data = { - .channel_offset = 0x80, - .timer_bit = 2, - .clockevent_rating = 200, -}; - -static struct resource mtu2_2_resources[] = { - [0] = { - .start = 0xfffe4000, - .end = 0xfffe400a, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 124, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_2_device = { - .name = "sh_mtu2", - .id = 2, - .dev = { - .platform_data = &mtu2_2_platform_data, - }, - .resource = mtu2_2_resources, - .num_resources = ARRAY_SIZE(mtu2_2_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct platform_device *sh7201_devices[] __initdata = { @@ -459,9 +389,7 @@ static struct platform_device *sh7201_devices[] __initdata = { &scif6_device, &scif7_device, &rtc_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &mtu2_device, }; static int __init sh7201_devices_setup(void) @@ -485,9 +413,7 @@ static struct platform_device *sh7201_early_devices[] __initdata = { &scif5_device, &scif6_device, &scif7_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &mtu2_device, }; #define STBCR3 0xfffe0408 diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c index d55a0f30ada3..3b4894cba92f 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -265,118 +265,37 @@ static struct platform_device scif3_device = { }, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, }; -static struct resource cmt0_resources[] = { - [0] = { - .start = 0xfffec002, - .end = 0xfffec007, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 142, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt0_device = { - .name = "sh_cmt", - .id = 0, - .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .channel_offset = 0x08, - .timer_bit = 1, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ -}; - -static struct resource cmt1_resources[] = { - [0] = { - .start = 0xfffec008, - .end = 0xfffec00d, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 143, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, - }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), -}; - -static struct sh_timer_config mtu2_0_platform_data = { - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] = { - [0] = { - .start = 0xfffe4300, - .end = 0xfffe4326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 146, - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xfffec000, 0x10), + DEFINE_RES_IRQ(142), + DEFINE_RES_IRQ(143), }; -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", +static struct platform_device cmt_device = { + .name = "sh-cmt-16", .id = 0, .dev = { - .platform_data = &mtu2_0_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; -static struct sh_timer_config mtu2_1_platform_data = { - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xfffe4000, 0x400), + DEFINE_RES_IRQ_NAMED(146, "tgi0a"), + DEFINE_RES_IRQ_NAMED(153, "tgi1a"), }; -static struct resource mtu2_1_resources[] = { - [0] = { - .start = 0xfffe4380, - .end = 0xfffe4390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 153, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct resource rtc_resources[] = { @@ -404,10 +323,8 @@ static struct platform_device *sh7203_devices[] __initdata = { &scif1_device, &scif2_device, &scif3_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, &rtc_device, }; @@ -428,10 +345,8 @@ static struct platform_device *sh7203_early_devices[] __initdata = { &scif1_device, &scif2_device, &scif3_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, }; #define STBCR3 0xfffe0408 diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index 241e745e3ced..49bc5a34bec1 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -217,146 +217,38 @@ static struct platform_device scif3_device = { }, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, }; -static struct resource cmt0_resources[] = { - [0] = { - .start = 0xfffec002, - .end = 0xfffec007, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 140, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt0_device = { - .name = "sh_cmt", - .id = 0, - .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .channel_offset = 0x08, - .timer_bit = 1, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ -}; - -static struct resource cmt1_resources[] = { - [0] = { - .start = 0xfffec008, - .end = 0xfffec00d, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 144, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, - }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), -}; - -static struct sh_timer_config mtu2_0_platform_data = { - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] = { - [0] = { - .start = 0xfffe4300, - .end = 0xfffe4326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 156, - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xfffec000, 0x10), + DEFINE_RES_IRQ(140), + DEFINE_RES_IRQ(144), }; -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", +static struct platform_device cmt_device = { + .name = "sh-cmt-16", .id = 0, .dev = { - .platform_data = &mtu2_0_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; -static struct sh_timer_config mtu2_1_platform_data = { - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xfffe4000, 0x400), + DEFINE_RES_IRQ_NAMED(156, "tgi0a"), + DEFINE_RES_IRQ_NAMED(164, "tgi1a"), + DEFINE_RES_IRQ_NAMED(180, "tgi2a"), }; -static struct resource mtu2_1_resources[] = { - [0] = { - .start = 0xfffe4380, - .end = 0xfffe4390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 164, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), -}; - -static struct sh_timer_config mtu2_2_platform_data = { - .channel_offset = 0x80, - .timer_bit = 2, - .clockevent_rating = 200, -}; - -static struct resource mtu2_2_resources[] = { - [0] = { - .start = 0xfffe4000, - .end = 0xfffe400a, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 180, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_2_device = { - .name = "sh_mtu2", - .id = 2, - .dev = { - .platform_data = &mtu2_2_platform_data, - }, - .resource = mtu2_2_resources, - .num_resources = ARRAY_SIZE(mtu2_2_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2s", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct platform_device *sh7206_devices[] __initdata = { @@ -364,11 +256,8 @@ static struct platform_device *sh7206_devices[] __initdata = { &scif1_device, &scif2_device, &scif3_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &cmt_device, + &mtu2_device, }; static int __init sh7206_devices_setup(void) @@ -388,11 +277,8 @@ static struct platform_device *sh7206_early_devices[] __initdata = { &scif1_device, &scif2_device, &scif3_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, - &mtu2_2_device, + &cmt_device, + &mtu2_device, }; #define STBCR3 0xfffe0408 diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c index ad5b0f429882..608146455562 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7264.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7264.c @@ -433,125 +433,37 @@ static struct platform_device scif7_device = { }, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, }; -static struct resource cmt0_resources[] = { - [0] = { - .name = "CMT0", - .start = 0xfffec002, - .end = 0xfffec007, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 175, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt0_device = { - .name = "sh_cmt", - .id = 0, - .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .name = "CMT1", - .channel_offset = 0x08, - .timer_bit = 1, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ -}; - -static struct resource cmt1_resources[] = { - [0] = { - .name = "CMT1", - .start = 0xfffec008, - .end = 0xfffec00d, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 176, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, - }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), -}; - -static struct sh_timer_config mtu2_0_platform_data = { - .name = "MTU2_0", - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] = { - [0] = { - .name = "MTU2_0", - .start = 0xfffe4300, - .end = 0xfffe4326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 179, - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xfffec000, 0x10), + DEFINE_RES_IRQ(175), + DEFINE_RES_IRQ(176), }; -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", +static struct platform_device cmt_device = { + .name = "sh-cmt-16", .id = 0, .dev = { - .platform_data = &mtu2_0_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; -static struct sh_timer_config mtu2_1_platform_data = { - .name = "MTU2_1", - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xfffe4000, 0x400), + DEFINE_RES_IRQ_NAMED(179, "tgi0a"), + DEFINE_RES_IRQ_NAMED(186, "tgi1a"), }; -static struct resource mtu2_1_resources[] = { - [0] = { - .name = "MTU2_1", - .start = 0xfffe4380, - .end = 0xfffe4390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 186, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct resource rtc_resources[] = { @@ -620,10 +532,8 @@ static struct platform_device *sh7264_devices[] __initdata = { &scif5_device, &scif6_device, &scif7_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, &rtc_device, &r8a66597_usb_host_device, }; @@ -649,10 +559,8 @@ static struct platform_device *sh7264_early_devices[] __initdata = { &scif5_device, &scif6_device, &scif7_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c index 3995119f65dc..16ce5aa77bdd 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7269.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7269.c @@ -455,118 +455,37 @@ static struct platform_device scif7_device = { }, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 3, }; -static struct resource cmt0_resources[] = { - [0] = { - .start = 0xfffec002, - .end = 0xfffec007, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 188, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt0_device = { - .name = "sh_cmt", - .id = 0, - .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .channel_offset = 0x08, - .timer_bit = 1, - .clockevent_rating = 125, - .clocksource_rating = 0, /* disabled due to code generation issues */ -}; - -static struct resource cmt1_resources[] = { - [0] = { - .start = 0xfffec008, - .end = 0xfffec00d, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 189, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, - }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), -}; - -static struct sh_timer_config mtu2_0_platform_data = { - .channel_offset = -0x80, - .timer_bit = 0, - .clockevent_rating = 200, -}; - -static struct resource mtu2_0_resources[] = { - [0] = { - .start = 0xfffe4300, - .end = 0xfffe4326, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 192, - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0xfffec000, 0x10), + DEFINE_RES_IRQ(188), + DEFINE_RES_IRQ(189), }; -static struct platform_device mtu2_0_device = { - .name = "sh_mtu2", +static struct platform_device cmt_device = { + .name = "sh-cmt-16", .id = 0, .dev = { - .platform_data = &mtu2_0_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = mtu2_0_resources, - .num_resources = ARRAY_SIZE(mtu2_0_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; -static struct sh_timer_config mtu2_1_platform_data = { - .channel_offset = -0x100, - .timer_bit = 1, - .clockevent_rating = 200, +static struct resource mtu2_resources[] = { + DEFINE_RES_MEM(0xfffe4000, 0x400), + DEFINE_RES_IRQ_NAMED(192, "tgi0a"), + DEFINE_RES_IRQ_NAMED(203, "tgi1a"), }; -static struct resource mtu2_1_resources[] = { - [0] = { - .start = 0xfffe4380, - .end = 0xfffe4390, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 203, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mtu2_1_device = { - .name = "sh_mtu2", - .id = 1, - .dev = { - .platform_data = &mtu2_1_platform_data, - }, - .resource = mtu2_1_resources, - .num_resources = ARRAY_SIZE(mtu2_1_resources), +static struct platform_device mtu2_device = { + .name = "sh-mtu2", + .id = -1, + .resource = mtu2_resources, + .num_resources = ARRAY_SIZE(mtu2_resources), }; static struct resource rtc_resources[] = { @@ -629,10 +548,8 @@ static struct platform_device *sh7269_devices[] __initdata = { &scif5_device, &scif6_device, &scif7_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, &rtc_device, &r8a66597_usb_host_device, }; @@ -658,10 +575,8 @@ static struct platform_device *sh7269_early_devices[] __initdata = { &scif5_device, &scif6_device, &scif7_device, - &cmt0_device, - &cmt1_device, - &mtu2_0_device, - &mtu2_1_device, + &cmt_device, + &mtu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index c76b2543b85f..6a72fd14de21 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -143,25 +143,18 @@ static struct platform_device rtc_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xfffffe94, - .end = 0xfffffe9f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xfffffe90, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu-sh3", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -170,67 +163,10 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0xe, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xfffffea0, - .end = 0xfffffeab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1a, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xfffffeac, - .end = 0xfffffebb, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7705_devices[] __initdata = { &scif0_device, &scif1_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &rtc_device, }; @@ -245,8 +181,6 @@ static struct platform_device *sh7705_early_devices[] __initdata = { &scif0_device, &scif1_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index ff1465c0519c..9139d14b9c53 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -185,25 +185,18 @@ static struct platform_device scif2_device = { #endif static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xfffffe94, - .end = 0xfffffe9f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xfffffe90, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu-sh3", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -212,61 +205,6 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0xe, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xfffffea0, - .end = 0xfffffeab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1a, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xfffffeac, - .end = 0xfffffebb, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh770x_devices[] __initdata = { &scif0_device, #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ @@ -279,8 +217,6 @@ static struct platform_device *sh770x_devices[] __initdata = { &scif2_device, #endif &tmu0_device, - &tmu1_device, - &tmu2_device, &rtc_device, }; @@ -303,8 +239,6 @@ static struct platform_device *sh770x_early_devices[] __initdata = { &scif2_device, #endif &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index e2ce9360ed5a..e9ed300dba5c 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -142,25 +142,18 @@ static struct platform_device scif1_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xa412fe94, - .end = 0xa412fe9f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xa412fe90, 0x28), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu-sh3", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -169,67 +162,10 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0xe, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xa412fea0, - .end = 0xa412feab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1a, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xa412feac, - .end = 0xa412feb5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7710_devices[] __initdata = { &scif0_device, &scif1_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &rtc_device, }; @@ -244,8 +180,6 @@ static struct platform_device *sh7710_early_devices[] __initdata = { &scif0_device, &scif1_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index 1d5729dc0724..84df85a5b800 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -152,163 +152,38 @@ static struct platform_device usbf_device = { .resource = usbf_resources, }; -static struct sh_timer_config cmt0_platform_data = { - .channel_offset = 0x10, - .timer_bit = 0, - .clockevent_rating = 125, - .clocksource_rating = 125, +static struct sh_timer_config cmt_platform_data = { + .channels_mask = 0x1f, }; -static struct resource cmt0_resources[] = { - [0] = { - .start = 0x044a0010, - .end = 0x044a001b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, +static struct resource cmt_resources[] = { + DEFINE_RES_MEM(0x044a0000, 0x60), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; -static struct platform_device cmt0_device = { - .name = "sh_cmt", +static struct platform_device cmt_device = { + .name = "sh-cmt-32", .id = 0, .dev = { - .platform_data = &cmt0_platform_data, - }, - .resource = cmt0_resources, - .num_resources = ARRAY_SIZE(cmt0_resources), -}; - -static struct sh_timer_config cmt1_platform_data = { - .channel_offset = 0x20, - .timer_bit = 1, -}; - -static struct resource cmt1_resources[] = { - [0] = { - .start = 0x044a0020, - .end = 0x044a002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt1_device = { - .name = "sh_cmt", - .id = 1, - .dev = { - .platform_data = &cmt1_platform_data, - }, - .resource = cmt1_resources, - .num_resources = ARRAY_SIZE(cmt1_resources), -}; - -static struct sh_timer_config cmt2_platform_data = { - .channel_offset = 0x30, - .timer_bit = 2, -}; - -static struct resource cmt2_resources[] = { - [0] = { - .start = 0x044a0030, - .end = 0x044a003b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt2_device = { - .name = "sh_cmt", - .id = 2, - .dev = { - .platform_data = &cmt2_platform_data, - }, - .resource = cmt2_resources, - .num_resources = ARRAY_SIZE(cmt2_resources), -}; - -static struct sh_timer_config cmt3_platform_data = { - .channel_offset = 0x40, - .timer_bit = 3, -}; - -static struct resource cmt3_resources[] = { - [0] = { - .start = 0x044a0040, - .end = 0x044a004b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt3_device = { - .name = "sh_cmt", - .id = 3, - .dev = { - .platform_data = &cmt3_platform_data, + .platform_data = &cmt_platform_data, }, - .resource = cmt3_resources, - .num_resources = ARRAY_SIZE(cmt3_resources), -}; - -static struct sh_timer_config cmt4_platform_data = { - .channel_offset = 0x50, - .timer_bit = 4, -}; - -static struct resource cmt4_resources[] = { - [0] = { - .start = 0x044a0050, - .end = 0x044a005b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device cmt4_device = { - .name = "sh_cmt", - .id = 4, - .dev = { - .platform_data = &cmt4_platform_data, - }, - .resource = cmt4_resources, - .num_resources = ARRAY_SIZE(cmt4_resources), + .resource = cmt_resources, + .num_resources = ARRAY_SIZE(cmt_resources), }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x02, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xa412fe94, - .end = 0xa412fe9f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xa412fe90, 0x28), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu-sh3", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -317,72 +192,11 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0xe, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xa412fea0, - .end = 0xa412feab, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1a, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xa412feac, - .end = 0xa412feb5, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7720_devices[] __initdata = { &scif0_device, &scif1_device, - &cmt0_device, - &cmt1_device, - &cmt2_device, - &cmt3_device, - &cmt4_device, + &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &rtc_device, &usb_ohci_device, &usbf_device, @@ -398,14 +212,8 @@ arch_initcall(sh7720_devices_setup); static struct platform_device *sh7720_early_devices[] __initdata = { &scif0_device, &scif1_device, - &cmt0_device, - &cmt1_device, - &cmt2_device, - &cmt3_device, - &cmt4_device, + &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c index a8bd778d5ac8..e7a7b3cdf68d 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh4-202.c @@ -41,25 +41,18 @@ static struct platform_device scif0_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -68,66 +61,9 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh4202_devices[] __initdata = { &scif0_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; static int __init sh4202_devices_setup(void) @@ -140,8 +76,6 @@ arch_initcall(sh4202_devices_setup); static struct platform_device *sh4202_early_devices[] __initdata = { &scif0_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index a447a248491f..5f08c59b9f3e 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -82,25 +82,18 @@ static struct platform_device scif_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -109,26 +102,23 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; +/* SH7750R, SH7751 and SH7751R all have two extra timer channels */ +#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751R) + static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 3, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xfe100000, 0x20), + DEFINE_RES_IRQ(evt2irq(0xb00)), + DEFINE_RES_IRQ(evt2irq(0xb80)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -137,104 +127,15 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -/* SH7750R, SH7751 and SH7751R all have two extra timer channels */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xfe100008, - .end = 0xfe100013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xfe100014, - .end = 0xfe10001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xb80), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - #endif static struct platform_device *sh7750_devices[] __initdata = { &rtc_device, &tmu0_device, - &tmu1_device, - &tmu2_device, #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) - &tmu3_device, - &tmu4_device, + &tmu1_device, #endif }; @@ -254,13 +155,10 @@ arch_initcall(sh7750_devices_setup); static struct platform_device *sh7750_early_devices[] __initdata = { &tmu0_device, - &tmu1_device, - &tmu2_device, #if defined(CONFIG_CPU_SUBTYPE_SH7750R) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) - &tmu3_device, - &tmu4_device, + &tmu1_device, #endif }; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 1abd9fb4a386..973b736b3b98 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -227,25 +227,18 @@ static struct platform_device scif3_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -254,61 +247,6 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7760_devices[] __initdata = { &scif0_device, @@ -316,8 +254,6 @@ static struct platform_device *sh7760_devices[] __initdata = { &scif2_device, &scif3_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; static int __init sh7760_devices_setup(void) @@ -333,8 +269,6 @@ static struct platform_device *sh7760_early_devices[] __initdata = { &scif2_device, &scif3_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index 53638e231cd0..9edc06c02dcf 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -227,7 +227,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]), CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]), CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP014]), + CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]), CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]), CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]), CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c index 22e485d1990b..955b9add7810 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -225,7 +225,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hudi0", &mstp_clks[MSTP019]), CLKDEV_CON_ID("ubc0", &mstp_clks[MSTP017]), CLKDEV_CON_ID("tmu_fck", &mstp_clks[MSTP015]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[MSTP014]), + CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[MSTP014]), CLKDEV_CON_ID("rwdt0", &mstp_clks[MSTP013]), CLKDEV_CON_ID("mfi0", &mstp_clks[MSTP011]), CLKDEV_CON_ID("flctl0", &mstp_clks[MSTP010]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index c4cb740e4d10..8f07a1a38692 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -203,11 +203,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("uram0", &mstp_clks[HWBLK_URAM]), CLKDEV_CON_ID("xymem0", &mstp_clks[HWBLK_XYMEM]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]), + CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]), CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]), CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index 37c41c7747a3..ccbcab550df2 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -236,7 +236,7 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("sh0", &mstp_clks[HWBLK_SHYWAY]), CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]), CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]), + CLKDEV_ICK_ID("fck", "sh-cmt-32.0", &mstp_clks[HWBLK_CMT]), CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]), CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]), CLKDEV_CON_ID("flctl0", &mstp_clks[HWBLK_FLCTL]), @@ -264,12 +264,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("veu0", &mstp_clks[HWBLK_VEU2H0]), CLKDEV_CON_ID("vpu0", &mstp_clks[HWBLK_VPU]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[HWBLK_TMU1]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[HWBLK_TMU1]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[HWBLK_TMU1]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]), CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[HWBLK_SCIF0]), CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[HWBLK_SCIF1]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 0128af3399b7..f579dd528198 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -304,17 +304,13 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hudi0", &mstp_clks[HWBLK_HUDI]), CLKDEV_CON_ID("ubc0", &mstp_clks[HWBLK_UBC]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[HWBLK_TMU0]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[HWBLK_TMU1]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[HWBLK_TMU0]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[HWBLK_TMU1]), - CLKDEV_CON_ID("cmt_fck", &mstp_clks[HWBLK_CMT]), + CLKDEV_ICK_ID("fck", "sh-cmt-16.0", &mstp_clks[HWBLK_CMT]), CLKDEV_DEV_ID("sh-wdt.0", &mstp_clks[HWBLK_RWDT]), CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[HWBLK_DMAC1]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[HWBLK_TMU1]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[HWBLK_TMU1]), CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[HWBLK_SCIF0]), CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[HWBLK_SCIF1]), CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[HWBLK_SCIF2]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c index ed9501519ab3..1fdf1ee672de 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c @@ -201,15 +201,9 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("sci_fck", "sh-sci.4", &mstp_clks[MSTP022]), CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP021]), CLKDEV_CON_ID("hscif", &mstp_clks[MSTP019]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[MSTP016]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[MSTP015]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.6", &mstp_clks[MSTP014]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.7", &mstp_clks[MSTP014]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.8", &mstp_clks[MSTP014]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP016]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP015]), + CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP014]), CLKDEV_CON_ID("ssi0", &mstp_clks[MSTP012]), CLKDEV_CON_ID("ssi1", &mstp_clks[MSTP011]), CLKDEV_CON_ID("ssi2", &mstp_clks[MSTP010]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c index 5c0e3c335161..9a28fdb36387 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -123,8 +123,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("riic6", &mstp_clks[MSTP000]), CLKDEV_CON_ID("riic7", &mstp_clks[MSTP000]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP113]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP114]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP113]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP114]), CLKDEV_ICK_ID("sci_fck", "sh-sci.2", &mstp_clks[MSTP112]), CLKDEV_ICK_ID("sci_fck", "sh-sci.1", &mstp_clks[MSTP111]), CLKDEV_ICK_ID("sci_fck", "sh-sci.0", &mstp_clks[MSTP110]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index 1c83788db76a..17d0ea55a5a2 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -146,12 +146,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("mmcif_fck", &mstp_clks[MSTP013]), CLKDEV_CON_ID("flctl_fck", &mstp_clks[MSTP012]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[MSTP009]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]), CLKDEV_CON_ID("siof_fck", &mstp_clks[MSTP003]), CLKDEV_CON_ID("hspi_fck", &mstp_clks[MSTP002]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c index 8bba6f159023..bec2a83f1ba5 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -155,18 +155,10 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("i2c1_fck", &mstp_clks[MSTP015]), CLKDEV_CON_ID("i2c0_fck", &mstp_clks[MSTP014]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.6", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.7", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.8", &mstp_clks[MSTP010]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.9", &mstp_clks[MSTP011]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.10", &mstp_clks[MSTP011]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.11", &mstp_clks[MSTP011]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]), + CLKDEV_ICK_ID("fck", "sh-tmu.2", &mstp_clks[MSTP010]), + CLKDEV_ICK_ID("fck", "sh-tmu.3", &mstp_clks[MSTP011]), CLKDEV_CON_ID("sdif1_fck", &mstp_clks[MSTP005]), CLKDEV_CON_ID("sdif0_fck", &mstp_clks[MSTP004]), diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c index a9422dab0ce7..9a49a44f6f94 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -124,12 +124,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]), CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.0", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.1", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.2", &mstp_clks[MSTP008]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.3", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.4", &mstp_clks[MSTP009]), - CLKDEV_ICK_ID("tmu_fck", "sh_tmu.5", &mstp_clks[MSTP009]), + CLKDEV_ICK_ID("fck", "sh-tmu.0", &mstp_clks[MSTP008]), + CLKDEV_ICK_ID("fck", "sh-tmu.1", &mstp_clks[MSTP009]), CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]), CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 245d19254489..ceb3dedad983 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -228,26 +228,16 @@ static struct platform_device jpu_device = { }; static struct sh_timer_config cmt_platform_data = { - .channel_offset = 0x60, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 200, + .channels_mask = 0x20, }; static struct resource cmt_resources[] = { - [0] = { - .start = 0x044a0060, - .end = 0x044a006b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x044a0000, 0x70), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; static struct platform_device cmt_device = { - .name = "sh_cmt", + .name = "sh-cmt-32", .id = 0, .dev = { .platform_data = &cmt_platform_data, @@ -257,25 +247,18 @@ static struct platform_device cmt_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -284,61 +267,6 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7343_devices[] __initdata = { &scif0_device, &scif1_device, @@ -346,8 +274,6 @@ static struct platform_device *sh7343_devices[] __initdata = { &scif3_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &iic0_device, &iic1_device, &vpu_device, @@ -373,8 +299,6 @@ static struct platform_device *sh7343_early_devices[] __initdata = { &scif3_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 6f56cbd76b20..f75f67343139 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -176,26 +176,16 @@ static struct platform_device veu1_device = { }; static struct sh_timer_config cmt_platform_data = { - .channel_offset = 0x60, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 200, + .channels_mask = 0x20, }; static struct resource cmt_resources[] = { - [0] = { - .start = 0x044a0060, - .end = 0x044a006b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x044a0000, 0x70), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; static struct platform_device cmt_device = { - .name = "sh_cmt", + .name = "sh-cmt-32", .id = 0, .dev = { .platform_data = &cmt_platform_data, @@ -205,25 +195,18 @@ static struct platform_device cmt_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 16, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -232,67 +215,10 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh7366_devices[] __initdata = { &scif0_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &iic_device, &usb_host_device, &vpu_device, @@ -315,8 +241,6 @@ static struct platform_device *sh7366_early_devices[] __initdata = { &scif0_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 5a94efc8d4ce..57f83a92a505 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -413,26 +413,16 @@ static struct platform_device jpu_device = { }; static struct sh_timer_config cmt_platform_data = { - .channel_offset = 0x60, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 125, + .channels_mask = 0x20, }; static struct resource cmt_resources[] = { - [0] = { - .start = 0x044a0060, - .end = 0x044a006b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x044a0000, 0x70), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; static struct platform_device cmt_device = { - .name = "sh_cmt", + .name = "sh-cmt-32", .id = 0, .dev = { .platform_data = &cmt_platform_data, @@ -442,25 +432,18 @@ static struct platform_device cmt_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -469,61 +452,6 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 18, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct siu_platform siu_platform_data = { .dma_slave_tx_a = SHDMA_SLAVE_SIUA_TX, .dma_slave_rx_a = SHDMA_SLAVE_SIUA_RX, @@ -559,8 +487,6 @@ static struct platform_device *sh7722_devices[] __initdata = { &scif2_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, &rtc_device, &usbf_device, &iic_device, @@ -588,8 +514,6 @@ static struct platform_device *sh7722_early_devices[] __initdata = { &scif2_device, &cmt_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 3c5eb0993a75..3533b56dd465 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -245,26 +245,16 @@ static struct platform_device veu1_device = { }; static struct sh_timer_config cmt_platform_data = { - .channel_offset = 0x60, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 125, + .channels_mask = 0x20, }; static struct resource cmt_resources[] = { - [0] = { - .start = 0x044a0060, - .end = 0x044a006b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x044a0000, 0x70), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; static struct platform_device cmt_device = { - .name = "sh_cmt", + .name = "sh-cmt-32", .id = 0, .dev = { .platform_data = &cmt_platform_data, @@ -274,25 +264,18 @@ static struct platform_device cmt_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -302,25 +285,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd90000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x920)), + DEFINE_RES_IRQ(evt2irq(0x940)), + DEFINE_RES_IRQ(evt2irq(0x960)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -329,114 +305,6 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffd90008, - .end = 0xffd90013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x920), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffd90014, - .end = 0xffd9001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x940), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffd90020, - .end = 0xffd9002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x920), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - static struct resource rtc_resources[] = { [0] = { .start = 0xa465fec0, @@ -527,10 +395,6 @@ static struct platform_device *sh7723_devices[] __initdata = { &cmt_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, &rtc_device, &iic_device, &sh7723_usb_host_device, @@ -560,10 +424,6 @@ static struct platform_device *sh7723_early_devices[] __initdata = { &cmt_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 60ebbc6842ff..b9e84b1d3aa7 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -648,26 +648,16 @@ static struct platform_device beu1_device = { }; static struct sh_timer_config cmt_platform_data = { - .channel_offset = 0x60, - .timer_bit = 5, - .clockevent_rating = 125, - .clocksource_rating = 200, + .channels_mask = 0x20, }; static struct resource cmt_resources[] = { - [0] = { - .start = 0x044a0060, - .end = 0x044a006b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xf00), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0x044a0000, 0x70), + DEFINE_RES_IRQ(evt2irq(0xf00)), }; static struct platform_device cmt_device = { - .name = "sh_cmt", + .name = "sh-cmt-32", .id = 0, .dev = { .platform_data = &cmt_platform_data, @@ -677,25 +667,18 @@ static struct platform_device cmt_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -705,25 +688,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd90000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x920)), + DEFINE_RES_IRQ(evt2irq(0x940)), + DEFINE_RES_IRQ(evt2irq(0x960)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -732,115 +708,6 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffd90008, - .end = 0xffd90013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x920), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffd90014, - .end = 0xffd9001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x940), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffd90020, - .end = 0xffd9002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x920), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - /* JPU */ static struct uio_info jpu_platform_data = { .name = "JPU", @@ -938,10 +805,6 @@ static struct platform_device *sh7724_devices[] __initdata = { &cmt_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, &dma0_device, &dma1_device, &rtc_device, @@ -981,10 +844,6 @@ static struct platform_device *sh7724_early_devices[] __initdata = { &cmt_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c index dad4ed1b2f94..f617bcb734df 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7734.c @@ -200,25 +200,18 @@ static struct platform_device i2c0_device = { /* TMU */ static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xFFD80008, - .end = 0xFFD80014 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -228,26 +221,19 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xFFD80014, - .end = 0xFFD80020 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd81000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x480)), + DEFINE_RES_IRQ(evt2irq(0x4a0)), + DEFINE_RES_IRQ(evt2irq(0x4c0)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, + .name = "sh-tmu", + .id = 1, .dev = { .platform_data = &tmu1_platform_data, }, @@ -256,25 +242,19 @@ static struct platform_device tmu1_device = { }; static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, + .channels_mask = 7, }; static struct resource tmu2_resources[] = { - [0] = { - .start = 0xFFD80020, - .end = 0xFFD80030 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd82000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x500)), + DEFINE_RES_IRQ(evt2irq(0x520)), + DEFINE_RES_IRQ(evt2irq(0x540)), }; static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, + .name = "sh-tmu", + .id = 2, .dev = { .platform_data = &tmu2_platform_data, }, @@ -282,169 +262,6 @@ static struct platform_device tmu2_device = { .num_resources = ARRAY_SIZE(tmu2_resources), }; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xFFD81008, - .end = 0xFFD81014 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xFFD81014, - .end = 0xFFD81020 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4A0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xFFD81020, - .end = 0xFFD81030 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4C0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - -static struct sh_timer_config tmu6_platform_data = { - .channel_offset = 0x4, - .timer_bit = 0, -}; - -static struct resource tmu6_resources[] = { - [0] = { - .start = 0xFFD82008, - .end = 0xFFD82014 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x500), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu6_device = { - .name = "sh_tmu", - .id = 6, - .dev = { - .platform_data = &tmu6_platform_data, - }, - .resource = tmu6_resources, - .num_resources = ARRAY_SIZE(tmu6_resources), -}; - -static struct sh_timer_config tmu7_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu7_resources[] = { - [0] = { - .start = 0xFFD82014, - .end = 0xFFD82020 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x520), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu7_device = { - .name = "sh_tmu", - .id = 7, - .dev = { - .platform_data = &tmu7_platform_data, - }, - .resource = tmu7_resources, - .num_resources = ARRAY_SIZE(tmu7_resources), -}; - -static struct sh_timer_config tmu8_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu8_resources[] = { - [0] = { - .start = 0xFFD82020, - .end = 0xFFD82030 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x540), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu8_device = { - .name = "sh_tmu", - .id = 8, - .dev = { - .platform_data = &tmu8_platform_data, - }, - .resource = tmu8_resources, - .num_resources = ARRAY_SIZE(tmu8_resources), -}; - static struct platform_device *sh7734_devices[] __initdata = { &scif0_device, &scif1_device, @@ -455,12 +272,6 @@ static struct platform_device *sh7734_devices[] __initdata = { &tmu0_device, &tmu1_device, &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, - &tmu6_device, - &tmu7_device, - &tmu8_device, &rtc_device, }; @@ -474,12 +285,6 @@ static struct platform_device *sh7734_early_devices[] __initdata = { &tmu0_device, &tmu1_device, &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, - &tmu6_device, - &tmu7_device, - &tmu8_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index e43e5db53913..7b24ec4b409a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -87,25 +87,17 @@ static struct platform_device scif4_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 3, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xfe430008, - .end = 0xfe430013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xfe430000, 0x20), + DEFINE_RES_IRQ(evt2irq(0x580)), + DEFINE_RES_IRQ(evt2irq(0x5a0)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -114,34 +106,6 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = 0xfe430014, - .end = 0xfe43001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - static struct resource spi0_resources[] = { [0] = { .start = 0xfe002000, @@ -782,7 +746,6 @@ static struct platform_device *sh7757_devices[] __initdata = { &scif3_device, &scif4_device, &tmu0_device, - &tmu1_device, &dma0_device, &dma1_device, &dma2_device, @@ -806,7 +769,6 @@ static struct platform_device *sh7757_early_devices[] __initdata = { &scif3_device, &scif4_device, &tmu0_device, - &tmu1_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 5eebbd7f4c21..5a47d670ddec 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -158,25 +158,18 @@ static struct platform_device usbf_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x580)), + DEFINE_RES_IRQ(evt2irq(0x5a0)), + DEFINE_RES_IRQ(evt2irq(0x5c0)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -186,25 +179,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5a0), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd88000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0xe00)), + DEFINE_RES_IRQ(evt2irq(0xe20)), + DEFINE_RES_IRQ(evt2irq(0xe40)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -213,124 +199,12 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffd88008, - .end = 0xffd88013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffd88014, - .end = 0xffd8801f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe20), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffd88020, - .end = 0xffd8802b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe40), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - static struct platform_device *sh7763_devices[] __initdata = { &scif0_device, &scif1_device, &scif2_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, &rtc_device, &usb_ohci_device, &usbf_device, @@ -349,10 +223,6 @@ static struct platform_device *sh7763_early_devices[] __initdata = { &scif2_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c index e1ba8cb74e5a..e9b532a76c37 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c @@ -226,25 +226,18 @@ static struct platform_device scif9_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -254,25 +247,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd81000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x460)), + DEFINE_RES_IRQ(evt2irq(0x480)), + DEFINE_RES_IRQ(evt2irq(0x4a0)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -282,24 +268,18 @@ static struct platform_device tmu1_device = { }; static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, + .channels_mask = 7, }; static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd82000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x4c0)), + DEFINE_RES_IRQ(evt2irq(0x4e0)), + DEFINE_RES_IRQ(evt2irq(0x500)), }; static struct platform_device tmu2_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 2, .dev = { .platform_data = &tmu2_platform_data, @@ -308,168 +288,6 @@ static struct platform_device tmu2_device = { .num_resources = ARRAY_SIZE(tmu2_resources), }; -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffd81008, - .end = 0xffd81013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x460), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffd81014, - .end = 0xffd8101f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffd81020, - .end = 0xffd8102f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - -static struct sh_timer_config tmu6_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu6_resources[] = { - [0] = { - .start = 0xffd82008, - .end = 0xffd82013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu6_device = { - .name = "sh_tmu", - .id = 6, - .dev = { - .platform_data = &tmu6_platform_data, - }, - .resource = tmu6_resources, - .num_resources = ARRAY_SIZE(tmu6_resources), -}; - -static struct sh_timer_config tmu7_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu7_resources[] = { - [0] = { - .start = 0xffd82014, - .end = 0xffd8201f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4e0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu7_device = { - .name = "sh_tmu", - .id = 7, - .dev = { - .platform_data = &tmu7_platform_data, - }, - .resource = tmu7_resources, - .num_resources = ARRAY_SIZE(tmu7_resources), -}; - -static struct sh_timer_config tmu8_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu8_resources[] = { - [0] = { - .start = 0xffd82020, - .end = 0xffd8202b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x500), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu8_device = { - .name = "sh_tmu", - .id = 8, - .dev = { - .platform_data = &tmu8_platform_data, - }, - .resource = tmu8_resources, - .num_resources = ARRAY_SIZE(tmu8_resources), -}; - static struct platform_device *sh7770_devices[] __initdata = { &scif0_device, &scif1_device, @@ -484,12 +302,6 @@ static struct platform_device *sh7770_devices[] __initdata = { &tmu0_device, &tmu1_device, &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, - &tmu6_device, - &tmu7_device, - &tmu8_device, }; static int __init sh7770_devices_setup(void) @@ -513,12 +325,6 @@ static struct platform_device *sh7770_early_devices[] __initdata = { &tmu0_device, &tmu1_device, &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, - &tmu6_device, - &tmu7_device, - &tmu8_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 668e54bafa86..3ee7dd9b3a65 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -62,25 +62,18 @@ static struct platform_device scif1_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x580)), + DEFINE_RES_IRQ(evt2irq(0x5a0)), + DEFINE_RES_IRQ(evt2irq(0x5c0)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -90,25 +83,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5a0), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffdc0000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0xe00)), + DEFINE_RES_IRQ(evt2irq(0xe20)), + DEFINE_RES_IRQ(evt2irq(0xe40)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -117,114 +103,6 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffdc0008, - .end = 0xffdc0013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffdc0014, - .end = 0xffdc001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe20), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffdc0020, - .end = 0xffdc002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe40), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - static struct resource rtc_resources[] = { [0] = { .start = 0xffe80000, @@ -386,10 +264,6 @@ static struct platform_device *sh7780_devices[] __initdata = { &scif1_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, &rtc_device, &dma0_device, &dma1_device, @@ -407,10 +281,6 @@ static struct platform_device *sh7780_early_devices[] __initdata = { &scif1_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 4aa679140209..c72d5a5d0995 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -152,25 +152,18 @@ static struct platform_device scif5_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x580), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x580)), + DEFINE_RES_IRQ(evt2irq(0x5a0)), + DEFINE_RES_IRQ(evt2irq(0x5c0)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -180,25 +173,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5a0), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffdc0000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0xe00)), + DEFINE_RES_IRQ(evt2irq(0xe20)), + DEFINE_RES_IRQ(evt2irq(0xe40)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -207,114 +193,6 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x5c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffdc0008, - .end = 0xffdc0013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe00), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffdc0014, - .end = 0xffdc001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe20), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffdc0020, - .end = 0xffdc002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0xe40), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - /* DMA */ static const struct sh_dmae_channel sh7785_dmae0_channels[] = { { @@ -460,10 +338,6 @@ static struct platform_device *sh7785_devices[] __initdata = { &scif5_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, &dma0_device, &dma1_device, }; @@ -484,10 +358,6 @@ static struct platform_device *sh7785_early_devices[] __initdata = { &scif5_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; void __init plat_early_device_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c index 5d619a551a3b..479e79bdd3d0 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c @@ -175,25 +175,18 @@ static struct platform_device scif5_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffd80008, - .end = 0xffd80013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffd80000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -203,25 +196,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffd80014, - .end = 0xffd8001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffda0000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x480)), + DEFINE_RES_IRQ(evt2irq(0x4a0)), + DEFINE_RES_IRQ(evt2irq(0x4c0)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -231,24 +217,18 @@ static struct platform_device tmu1_device = { }; static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, + .channels_mask = 7, }; static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffd80020, - .end = 0xffd8002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffdc0000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x7a0)), + DEFINE_RES_IRQ(evt2irq(0x7a0)), + DEFINE_RES_IRQ(evt2irq(0x7a0)), }; static struct platform_device tmu2_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 2, .dev = { .platform_data = &tmu2_platform_data, @@ -258,24 +238,18 @@ static struct platform_device tmu2_device = { }; static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, + .channels_mask = 7, }; static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffda0008, - .end = 0xffda0013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffde0000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x7c0)), + DEFINE_RES_IRQ(evt2irq(0x7c0)), + DEFINE_RES_IRQ(evt2irq(0x7c0)), }; static struct platform_device tmu3_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 3, .dev = { .platform_data = &tmu3_platform_data, @@ -284,222 +258,6 @@ static struct platform_device tmu3_device = { .num_resources = ARRAY_SIZE(tmu3_resources), }; -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffda0014, - .end = 0xffda001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffda0020, - .end = 0xffda002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - -static struct sh_timer_config tmu6_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu6_resources[] = { - [0] = { - .start = 0xffdc0008, - .end = 0xffdc0013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu6_device = { - .name = "sh_tmu", - .id = 6, - .dev = { - .platform_data = &tmu6_platform_data, - }, - .resource = tmu6_resources, - .num_resources = ARRAY_SIZE(tmu6_resources), -}; - -static struct sh_timer_config tmu7_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu7_resources[] = { - [0] = { - .start = 0xffdc0014, - .end = 0xffdc001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu7_device = { - .name = "sh_tmu", - .id = 7, - .dev = { - .platform_data = &tmu7_platform_data, - }, - .resource = tmu7_resources, - .num_resources = ARRAY_SIZE(tmu7_resources), -}; - -static struct sh_timer_config tmu8_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu8_resources[] = { - [0] = { - .start = 0xffdc0020, - .end = 0xffdc002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu8_device = { - .name = "sh_tmu", - .id = 8, - .dev = { - .platform_data = &tmu8_platform_data, - }, - .resource = tmu8_resources, - .num_resources = ARRAY_SIZE(tmu8_resources), -}; - -static struct sh_timer_config tmu9_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu9_resources[] = { - [0] = { - .start = 0xffde0008, - .end = 0xffde0013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu9_device = { - .name = "sh_tmu", - .id = 9, - .dev = { - .platform_data = &tmu9_platform_data, - }, - .resource = tmu9_resources, - .num_resources = ARRAY_SIZE(tmu9_resources), -}; - -static struct sh_timer_config tmu10_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu10_resources[] = { - [0] = { - .start = 0xffde0014, - .end = 0xffde001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu10_device = { - .name = "sh_tmu", - .id = 10, - .dev = { - .platform_data = &tmu10_platform_data, - }, - .resource = tmu10_resources, - .num_resources = ARRAY_SIZE(tmu10_resources), -}; - -static struct sh_timer_config tmu11_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu11_resources[] = { - [0] = { - .start = 0xffde0020, - .end = 0xffde002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x7c0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu11_device = { - .name = "sh_tmu", - .id = 11, - .dev = { - .platform_data = &tmu11_platform_data, - }, - .resource = tmu11_resources, - .num_resources = ARRAY_SIZE(tmu11_resources), -}; - static const struct sh_dmae_channel dmac0_channels[] = { { .offset = 0, @@ -641,15 +399,6 @@ static struct platform_device *sh7786_early_devices[] __initdata = { &tmu0_device, &tmu1_device, &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, - &tmu6_device, - &tmu7_device, - &tmu8_device, - &tmu9_device, - &tmu10_device, - &tmu11_device, }; static struct platform_device *sh7786_devices[] __initdata = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index 0856bcbb1da0..a78c5feb4e3b 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -100,25 +100,18 @@ static struct platform_device scif2_device = { }; static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = 0xffc10008, - .end = 0xffc10013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x400), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffc10000, 0x30), + DEFINE_RES_IRQ(evt2irq(0x400)), + DEFINE_RES_IRQ(evt2irq(0x420)), + DEFINE_RES_IRQ(evt2irq(0x440)), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -128,25 +121,18 @@ static struct platform_device tmu0_device = { }; static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, + .channels_mask = 7, }; static struct resource tmu1_resources[] = { - [0] = { - .start = 0xffc10014, - .end = 0xffc1001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x420), - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(0xffc20000, 0x2c), + DEFINE_RES_IRQ(evt2irq(0x460)), + DEFINE_RES_IRQ(evt2irq(0x480)), + DEFINE_RES_IRQ(evt2irq(0x4a0)), }; static struct platform_device tmu1_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 1, .dev = { .platform_data = &tmu1_platform_data, @@ -155,124 +141,12 @@ static struct platform_device tmu1_device = { .num_resources = ARRAY_SIZE(tmu1_resources), }; -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = 0xffc10020, - .end = 0xffc1002f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x440), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - -static struct sh_timer_config tmu3_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, -}; - -static struct resource tmu3_resources[] = { - [0] = { - .start = 0xffc20008, - .end = 0xffc20013, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x460), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu3_device = { - .name = "sh_tmu", - .id = 3, - .dev = { - .platform_data = &tmu3_platform_data, - }, - .resource = tmu3_resources, - .num_resources = ARRAY_SIZE(tmu3_resources), -}; - -static struct sh_timer_config tmu4_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, -}; - -static struct resource tmu4_resources[] = { - [0] = { - .start = 0xffc20014, - .end = 0xffc2001f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x480), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu4_device = { - .name = "sh_tmu", - .id = 4, - .dev = { - .platform_data = &tmu4_platform_data, - }, - .resource = tmu4_resources, - .num_resources = ARRAY_SIZE(tmu4_resources), -}; - -static struct sh_timer_config tmu5_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu5_resources[] = { - [0] = { - .start = 0xffc20020, - .end = 0xffc2002b, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x4a0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu5_device = { - .name = "sh_tmu", - .id = 5, - .dev = { - .platform_data = &tmu5_platform_data, - }, - .resource = tmu5_resources, - .num_resources = ARRAY_SIZE(tmu5_resources), -}; - static struct platform_device *shx3_early_devices[] __initdata = { &scif0_device, &scif1_device, &scif2_device, &tmu0_device, &tmu1_device, - &tmu2_device, - &tmu3_device, - &tmu4_device, - &tmu5_device, }; static int __init shx3_devices_setup(void) diff --git a/arch/sh/kernel/cpu/sh5/setup-sh5.c b/arch/sh/kernel/cpu/sh5/setup-sh5.c index 14d68213d16b..1bf0b2cf6652 100644 --- a/arch/sh/kernel/cpu/sh5/setup-sh5.c +++ b/arch/sh/kernel/cpu/sh5/setup-sh5.c @@ -71,30 +71,20 @@ static struct platform_device rtc_device = { #define TMU_BLOCK_OFF 0x01020000 #define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF -#define TMU0_BASE (TMU_BASE + 0x8 + (0xc * 0x0)) -#define TMU1_BASE (TMU_BASE + 0x8 + (0xc * 0x1)) -#define TMU2_BASE (TMU_BASE + 0x8 + (0xc * 0x2)) static struct sh_timer_config tmu0_platform_data = { - .channel_offset = 0x04, - .timer_bit = 0, - .clockevent_rating = 200, + .channels_mask = 7, }; static struct resource tmu0_resources[] = { - [0] = { - .start = TMU0_BASE, - .end = TMU0_BASE + 0xc - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TUNI0, - .flags = IORESOURCE_IRQ, - }, + DEFINE_RES_MEM(TMU_BASE, 0x30), + DEFINE_RES_IRQ(IRQ_TUNI0), + DEFINE_RES_IRQ(IRQ_TUNI1), + DEFINE_RES_IRQ(IRQ_TUNI2), }; static struct platform_device tmu0_device = { - .name = "sh_tmu", + .name = "sh-tmu", .id = 0, .dev = { .platform_data = &tmu0_platform_data, @@ -103,66 +93,9 @@ static struct platform_device tmu0_device = { .num_resources = ARRAY_SIZE(tmu0_resources), }; -static struct sh_timer_config tmu1_platform_data = { - .channel_offset = 0x10, - .timer_bit = 1, - .clocksource_rating = 200, -}; - -static struct resource tmu1_resources[] = { - [0] = { - .start = TMU1_BASE, - .end = TMU1_BASE + 0xc - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TUNI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu1_device = { - .name = "sh_tmu", - .id = 1, - .dev = { - .platform_data = &tmu1_platform_data, - }, - .resource = tmu1_resources, - .num_resources = ARRAY_SIZE(tmu1_resources), -}; - -static struct sh_timer_config tmu2_platform_data = { - .channel_offset = 0x1c, - .timer_bit = 2, -}; - -static struct resource tmu2_resources[] = { - [0] = { - .start = TMU2_BASE, - .end = TMU2_BASE + 0xc - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_TUNI2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device tmu2_device = { - .name = "sh_tmu", - .id = 2, - .dev = { - .platform_data = &tmu2_platform_data, - }, - .resource = tmu2_resources, - .num_resources = ARRAY_SIZE(tmu2_resources), -}; - static struct platform_device *sh5_early_devices[] __initdata = { &scif0_device, &tmu0_device, - &tmu1_device, - &tmu2_device, }; static struct platform_device *sh5_devices[] __initdata = { diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c index f9173766ec4b..2197fc584186 100644 --- a/arch/sh/kernel/hw_breakpoint.c +++ b/arch/sh/kernel/hw_breakpoint.c @@ -52,7 +52,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp) int i; for (i = 0; i < sh_ubc->num_events; i++) { - struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]); + struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]); if (!*slot) { *slot = bp; @@ -84,7 +84,7 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp) int i; for (i = 0; i < sh_ubc->num_events; i++) { - struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]); + struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]); if (*slot == bp) { *slot = NULL; diff --git a/arch/sh/kernel/kprobes.c b/arch/sh/kernel/kprobes.c index 42b46e61a2d5..83acbf3f6de8 100644 --- a/arch/sh/kernel/kprobes.c +++ b/arch/sh/kernel/kprobes.c @@ -102,7 +102,7 @@ int __kprobes kprobe_handle_illslot(unsigned long pc) void __kprobes arch_remove_kprobe(struct kprobe *p) { - struct kprobe *saved = &__get_cpu_var(saved_next_opcode); + struct kprobe *saved = this_cpu_ptr(&saved_next_opcode); if (saved->addr) { arch_disarm_kprobe(p); @@ -111,7 +111,7 @@ void __kprobes arch_remove_kprobe(struct kprobe *p) saved->addr = NULL; saved->opcode = 0; - saved = &__get_cpu_var(saved_next_opcode2); + saved = this_cpu_ptr(&saved_next_opcode2); if (saved->addr) { arch_disarm_kprobe(saved); @@ -129,14 +129,14 @@ static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb) static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb) { - __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp); kcb->kprobe_status = kcb->prev_kprobe.status; } static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { - __get_cpu_var(current_kprobe) = p; + __this_cpu_write(current_kprobe, p); } /* @@ -146,15 +146,15 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs, */ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { - __get_cpu_var(saved_current_opcode).addr = (kprobe_opcode_t *)regs->pc; + __this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc); if (p != NULL) { struct kprobe *op1, *op2; arch_disarm_kprobe(p); - op1 = &__get_cpu_var(saved_next_opcode); - op2 = &__get_cpu_var(saved_next_opcode2); + op1 = this_cpu_ptr(&saved_next_opcode); + op2 = this_cpu_ptr(&saved_next_opcode2); if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) { unsigned int reg_nr = ((p->opcode >> 8) & 0x000F); @@ -249,7 +249,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) kcb->kprobe_status = KPROBE_REENTER; return 1; } else { - p = __get_cpu_var(current_kprobe); + p = __this_cpu_read(current_kprobe); if (p->break_handler && p->break_handler(p, regs)) { goto ss_probe; } @@ -336,9 +336,9 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) continue; if (ri->rp && ri->rp->handler) { - __get_cpu_var(current_kprobe) = &ri->rp->kp; + __this_cpu_write(current_kprobe, &ri->rp->kp); ri->rp->handler(ri, regs); - __get_cpu_var(current_kprobe) = NULL; + __this_cpu_write(current_kprobe, NULL); } orig_ret_address = (unsigned long)ri->ret_addr; @@ -383,19 +383,19 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs) cur->post_handler(cur, regs, 0); } - p = &__get_cpu_var(saved_next_opcode); + p = this_cpu_ptr(&saved_next_opcode); if (p->addr) { arch_disarm_kprobe(p); p->addr = NULL; p->opcode = 0; - addr = __get_cpu_var(saved_current_opcode).addr; - __get_cpu_var(saved_current_opcode).addr = NULL; + addr = __this_cpu_read(saved_current_opcode.addr); + __this_cpu_write(saved_current_opcode.addr, NULL); p = get_kprobe(addr); arch_arm_kprobe(p); - p = &__get_cpu_var(saved_next_opcode2); + p = this_cpu_ptr(&saved_next_opcode2); if (p->addr) { arch_disarm_kprobe(p); p->addr = NULL; @@ -511,7 +511,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, if (kprobe_handler(args->regs)) { ret = NOTIFY_STOP; } else { - p = __get_cpu_var(current_kprobe); + p = __this_cpu_read(current_kprobe); if (p->break_handler && p->break_handler(p, args->regs)) ret = NOTIFY_STOP; diff --git a/arch/sh/kernel/localtimer.c b/arch/sh/kernel/localtimer.c index 8bfc6dfa8b94..b880a7e2ace7 100644 --- a/arch/sh/kernel/localtimer.c +++ b/arch/sh/kernel/localtimer.c @@ -32,7 +32,7 @@ static DEFINE_PER_CPU(struct clock_event_device, local_clockevent); */ void local_timer_interrupt(void) { - struct clock_event_device *clk = &__get_cpu_var(local_clockevent); + struct clock_event_device *clk = this_cpu_ptr(&local_clockevent); irq_enter(); clk->event_handler(clk); diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c index b9cefebda55c..02331672b6db 100644 --- a/arch/sh/kernel/perf_event.c +++ b/arch/sh/kernel/perf_event.c @@ -227,7 +227,7 @@ again: static void sh_pmu_stop(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; @@ -245,7 +245,7 @@ static void sh_pmu_stop(struct perf_event *event, int flags) static void sh_pmu_start(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; @@ -262,7 +262,7 @@ static void sh_pmu_start(struct perf_event *event, int flags) static void sh_pmu_del(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); sh_pmu_stop(event, PERF_EF_UPDATE); __clear_bit(event->hw.idx, cpuc->used_mask); @@ -272,7 +272,7 @@ static void sh_pmu_del(struct perf_event *event, int flags) static int sh_pmu_add(struct perf_event *event, int flags) { - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; int ret = -EAGAIN; diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 86a7936a980b..fc5acfc93c92 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -111,7 +111,7 @@ void play_dead_common(void) irq_ctx_exit(raw_smp_processor_id()); mb(); - __get_cpu_var(cpu_state) = CPU_DEAD; + __this_cpu_write(cpu_state, CPU_DEAD); local_irq_disable(); } diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index 0d676a41081e..d7762349ea48 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -83,11 +83,6 @@ int pud_huge(pud_t pud) return 0; } -int pmd_huge_support(void) -{ - return 0; -} - struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h index 905832aa9e9e..f08fe51b264d 100644 --- a/arch/sparc/include/asm/atomic_32.h +++ b/arch/sparc/include/asm/atomic_32.h @@ -14,6 +14,7 @@ #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #include <asm-generic/atomic64.h> @@ -52,10 +53,4 @@ extern void atomic_set(atomic_t *, int); #define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) #define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* !(__ARCH_SPARC_ATOMIC__) */ diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h index be56a244c9cf..8b2f1bde2889 100644 --- a/arch/sparc/include/asm/atomic_64.h +++ b/arch/sparc/include/asm/atomic_64.h @@ -9,6 +9,7 @@ #include <linux/types.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } #define ATOMIC64_INIT(i) { (i) } @@ -108,10 +109,4 @@ static inline long atomic64_add_unless(atomic64_t *v, long a, long u) extern long atomic64_dec_if_positive(atomic64_t *v); -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* !(__ARCH_SPARC64_ATOMIC__) */ diff --git a/arch/sparc/include/asm/barrier_64.h b/arch/sparc/include/asm/barrier_64.h index b5aad964558e..305dcc3dc721 100644 --- a/arch/sparc/include/asm/barrier_64.h +++ b/arch/sparc/include/asm/barrier_64.h @@ -68,4 +68,7 @@ do { \ ___p1; \ }) +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + #endif /* !(__SPARC64_BARRIER_H) */ diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h index 25a676653d45..88c9a962502c 100644 --- a/arch/sparc/include/asm/bitops_32.h +++ b/arch/sparc/include/asm/bitops_32.h @@ -90,9 +90,6 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) #include <asm-generic/bitops/non-atomic.h> -#define smp_mb__before_clear_bit() do { } while(0) -#define smp_mb__after_clear_bit() do { } while(0) - #include <asm-generic/bitops/ffz.h> #include <asm-generic/bitops/__ffs.h> #include <asm-generic/bitops/sched.h> diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h index 29011cc0e4be..f1a051ca301a 100644 --- a/arch/sparc/include/asm/bitops_64.h +++ b/arch/sparc/include/asm/bitops_64.h @@ -13,6 +13,7 @@ #include <linux/compiler.h> #include <asm/byteorder.h> +#include <asm/barrier.h> extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr); extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr); @@ -23,9 +24,6 @@ extern void change_bit(unsigned long nr, volatile unsigned long *addr); #include <asm-generic/bitops/non-atomic.h> -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - #include <asm-generic/bitops/fls.h> #include <asm-generic/bitops/__fls.h> #include <asm-generic/bitops/fls64.h> diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h index dc503297481f..53e9b4987db0 100644 --- a/arch/sparc/include/asm/pci_32.h +++ b/arch/sparc/include/asm/pci_32.h @@ -16,11 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* Dynamic DMA mapping stuff. */ #define PCI_DMA_BUS_IS_PHYS (0) diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index 1633b718d3bc..c6c7396e7627 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -16,11 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* The PCI address space does not equal the physical memory * address space. The networking and block device layers use * this boolean for bounce buffer decisions. diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index fde5abaac0cc..1a49ffdf9da9 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -24,7 +24,8 @@ /* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB). * The page copy blockops can use 0x6000000 to 0x8000000. - * The TSB is mapped in the 0x8000000 to 0xa000000 range. + * The 8K TSB is mapped in the 0x8000000 to 0x8400000 range. + * The 4M TSB is mapped in the 0x8400000 to 0x8800000 range. * The PROM resides in an area spanning 0xf0000000 to 0x100000000. * The vmalloc area spans 0x100000000 to 0x200000000. * Since modules need to be in the lowest 32-bits of the address space, @@ -33,7 +34,8 @@ * 0x400000000. */ #define TLBTEMP_BASE _AC(0x0000000006000000,UL) -#define TSBMAP_BASE _AC(0x0000000008000000,UL) +#define TSBMAP_8K_BASE _AC(0x0000000008000000,UL) +#define TSBMAP_4M_BASE _AC(0x0000000008400000,UL) #define MODULES_VADDR _AC(0x0000000010000000,UL) #define MODULES_LEN _AC(0x00000000e0000000,UL) #define MODULES_END _AC(0x00000000f0000000,UL) diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index dfa53fdd5cbc..0aac1e8f2968 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -25,7 +25,6 @@ #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME #define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL #define __ARCH_WANT_SYS_TIME #define __ARCH_WANT_SYS_UTIME diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index 1555bbcae1ee..857ad77df9c0 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -543,8 +543,7 @@ static void pci_of_scan_bus(struct pci_pbm_info *pbm, printk("PCI: dev header type: %x\n", dev->hdr_type); - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + if (pci_is_bridge(dev)) of_scan_pci_bridge(pbm, child, dev); } } diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c index a364000ca1aa..7f41d40b7e6e 100644 --- a/arch/sparc/kernel/sysfs.c +++ b/arch/sparc/kernel/sysfs.c @@ -151,7 +151,7 @@ static ssize_t store_mmustat_enable(struct device *s, size_t count) { unsigned long val, err; - int ret = sscanf(buf, "%ld", &val); + int ret = sscanf(buf, "%lu", &val); if (ret != 1) return -EINVAL; diff --git a/arch/sparc/lib/NG2memcpy.S b/arch/sparc/lib/NG2memcpy.S index 2c20ad63ddbf..30eee6e8a81b 100644 --- a/arch/sparc/lib/NG2memcpy.S +++ b/arch/sparc/lib/NG2memcpy.S @@ -236,6 +236,7 @@ FUNC_NAME: /* %o0=dst, %o1=src, %o2=len */ */ VISEntryHalf + membar #Sync alignaddr %o1, %g0, %g0 add %o1, (64 - 1), %o4 diff --git a/arch/sparc/mm/fault_64.c b/arch/sparc/mm/fault_64.c index a8ff0d1a3b69..4ced3fc66130 100644 --- a/arch/sparc/mm/fault_64.c +++ b/arch/sparc/mm/fault_64.c @@ -281,18 +281,6 @@ static void noinline __kprobes bogus_32bit_fault_tpc(struct pt_regs *regs) show_regs(regs); } -static void noinline __kprobes bogus_32bit_fault_address(struct pt_regs *regs, - unsigned long addr) -{ - static int times; - - if (times++ < 10) - printk(KERN_ERR "FAULT[%s:%d]: 32-bit process " - "reports 64-bit fault address [%lx]\n", - current->comm, current->pid, addr); - show_regs(regs); -} - asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) { enum ctx_state prev_state = exception_enter(); @@ -322,10 +310,8 @@ asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs) goto intr_or_no_mm; } } - if (unlikely((address >> 32) != 0)) { - bogus_32bit_fault_address(regs, address); + if (unlikely((address >> 32) != 0)) goto intr_or_no_mm; - } } if (regs->tstate & TSTATE_PRIV) { diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c index 9bd9ce80bf77..d329537739c6 100644 --- a/arch/sparc/mm/hugetlbpage.c +++ b/arch/sparc/mm/hugetlbpage.c @@ -231,11 +231,6 @@ int pud_huge(pud_t pud) return 0; } -int pmd_huge_support(void) -{ - return 0; -} - struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c index f5d506fdddad..fe19b81acc09 100644 --- a/arch/sparc/mm/tsb.c +++ b/arch/sparc/mm/tsb.c @@ -133,7 +133,19 @@ static void setup_tsb_params(struct mm_struct *mm, unsigned long tsb_idx, unsign mm->context.tsb_block[tsb_idx].tsb_nentries = tsb_bytes / sizeof(struct tsb); - base = TSBMAP_BASE; + switch (tsb_idx) { + case MM_TSB_BASE: + base = TSBMAP_8K_BASE; + break; +#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE) + case MM_TSB_HUGE: + base = TSBMAP_4M_BASE; + break; +#endif + default: + BUG(); + } + tte = pgprot_val(PAGE_KERNEL_LOCKED); tsb_paddr = __pa(mm->context.tsb_block[tsb_idx].tsb); BUG_ON(tsb_paddr & (tsb_bytes - 1UL)); diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 85258ca43ff5..4f3006b600e3 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -125,6 +125,8 @@ config HVC_TILE config TILEGX bool "Building for TILE-Gx (64-bit) processor" + select SPARSE_IRQ + select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FUNCTION_GRAPH_TRACER diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h index 1ad4a1f7d42b..1b109fad9fff 100644 --- a/arch/tile/include/asm/atomic_32.h +++ b/arch/tile/include/asm/atomic_32.h @@ -169,16 +169,6 @@ static inline void atomic64_set(atomic64_t *v, long long n) #define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL) -/* - * We need to barrier before modifying the word, since the _atomic_xxx() - * routines just tns the lock and then read/modify/write of the word. - * But after the word is updated, the routine issues an "mf" before returning, - * and since it's a function call, we don't even need a compiler barrier. - */ -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_dec() do { } while (0) -#define smp_mb__after_atomic_inc() do { } while (0) #endif /* !__ASSEMBLY__ */ diff --git a/arch/tile/include/asm/atomic_64.h b/arch/tile/include/asm/atomic_64.h index ad220eed05fc..7b11c5fadd42 100644 --- a/arch/tile/include/asm/atomic_64.h +++ b/arch/tile/include/asm/atomic_64.h @@ -105,12 +105,6 @@ static inline long atomic64_add_unless(atomic64_t *v, long a, long u) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) -/* Atomic dec and inc don't implement barrier, so provide them if needed. */ -#define smp_mb__before_atomic_dec() smp_mb() -#define smp_mb__after_atomic_dec() smp_mb() -#define smp_mb__before_atomic_inc() smp_mb() -#define smp_mb__after_atomic_inc() smp_mb() - /* Define this to indicate that cmpxchg is an efficient operation. */ #define __HAVE_ARCH_CMPXCHG diff --git a/arch/tile/include/asm/barrier.h b/arch/tile/include/asm/barrier.h index b5a05d050a8f..96a42ae79f4d 100644 --- a/arch/tile/include/asm/barrier.h +++ b/arch/tile/include/asm/barrier.h @@ -72,6 +72,20 @@ mb_incoherent(void) #define mb() fast_mb() #define iob() fast_iob() +#ifndef __tilegx__ /* 32 bit */ +/* + * We need to barrier before modifying the word, since the _atomic_xxx() + * routines just tns the lock and then read/modify/write of the word. + * But after the word is updated, the routine issues an "mf" before returning, + * and since it's a function call, we don't even need a compiler barrier. + */ +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() do { } while (0) +#else /* 64 bit */ +#define smp_mb__before_atomic() smp_mb() +#define smp_mb__after_atomic() smp_mb() +#endif + #include <asm-generic/barrier.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h index d5a206865036..20caa346ac06 100644 --- a/arch/tile/include/asm/bitops.h +++ b/arch/tile/include/asm/bitops.h @@ -17,6 +17,7 @@ #define _ASM_TILE_BITOPS_H #include <linux/types.h> +#include <asm/barrier.h> #ifndef _LINUX_BITOPS_H #error only <linux/bitops.h> can be included directly diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h index 386865ad2f55..bbf7b666f21d 100644 --- a/arch/tile/include/asm/bitops_32.h +++ b/arch/tile/include/asm/bitops_32.h @@ -49,8 +49,8 @@ static inline void set_bit(unsigned nr, volatile unsigned long *addr) * restricted to acting on a single-word quantity. * * clear_bit() may not contain a memory barrier, so if it is used for - * locking purposes, you should call smp_mb__before_clear_bit() and/or - * smp_mb__after_clear_bit() to ensure changes are visible on other cpus. + * locking purposes, you should call smp_mb__before_atomic() and/or + * smp_mb__after_atomic() to ensure changes are visible on other cpus. */ static inline void clear_bit(unsigned nr, volatile unsigned long *addr) { @@ -121,10 +121,6 @@ static inline int test_and_change_bit(unsigned nr, return (_atomic_xor(addr, mask) & mask) != 0; } -/* See discussion at smp_mb__before_atomic_dec() in <asm/atomic_32.h>. */ -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() do {} while (0) - #include <asm-generic/bitops/ext2-atomic.h> #endif /* _ASM_TILE_BITOPS_32_H */ diff --git a/arch/tile/include/asm/bitops_64.h b/arch/tile/include/asm/bitops_64.h index ad34cd056085..bb1a29221fcd 100644 --- a/arch/tile/include/asm/bitops_64.h +++ b/arch/tile/include/asm/bitops_64.h @@ -32,10 +32,6 @@ static inline void clear_bit(unsigned nr, volatile unsigned long *addr) __insn_fetchand((void *)(addr + nr / BITS_PER_LONG), ~mask); } -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() - - static inline void change_bit(unsigned nr, volatile unsigned long *addr) { unsigned long mask = (1UL << (nr % BITS_PER_LONG)); diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 33cff9a3058b..1fe86911838b 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -18,10 +18,12 @@ #include <linux/hardirq.h> /* The hypervisor interface provides 32 IRQs. */ -#define NR_IRQS 32 +#define NR_IRQS 32 /* IRQ numbers used for linux IPIs. */ -#define IRQ_RESCHEDULE 0 +#define IRQ_RESCHEDULE 0 +/* Interrupts for dynamic allocation start at 1. Let the core allocate irq0 */ +#define NR_IRQS_LEGACY 1 #define irq_canonicalize(irq) (irq) diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h index 729aa107f64e..d767ff9f59b9 100644 --- a/arch/tile/include/asm/thread_info.h +++ b/arch/tile/include/asm/thread_info.h @@ -129,6 +129,7 @@ extern void _cpu_idle(void); #define TIF_MEMDIE 7 /* OOM killer at work */ #define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define TIF_SYSCALL_TRACEPOINT 9 /* syscall tracepoint instrumentation */ +#define TIF_POLLING_NRFLAG 10 /* idle is polling for TIF_NEED_RESCHED */ #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) @@ -140,6 +141,7 @@ extern void _cpu_idle(void); #define _TIF_MEMDIE (1<<TIF_MEMDIE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) /* Work to do on any return to user space. */ #define _TIF_ALLWORK_MASK \ @@ -162,7 +164,6 @@ extern void _cpu_idle(void); #ifdef __tilegx__ #define TS_COMPAT 0x0001 /* 32-bit compatibility mode */ #endif -#define TS_POLLING 0x0004 /* in idle loop but not sleeping */ #define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal */ #ifndef __ASSEMBLY__ diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h index d15c0d8d550f..938311844233 100644 --- a/arch/tile/include/asm/topology.h +++ b/arch/tile/include/asm/topology.h @@ -44,39 +44,6 @@ static inline const struct cpumask *cpumask_of_node(int node) /* For now, use numa node -1 for global allocation. */ #define pcibus_to_node(bus) ((void)(bus), -1) -/* - * TILE architecture has many cores integrated in one processor, so we need - * setup bigger balance_interval for both CPU/NODE scheduling domains to - * reduce process scheduling costs. - */ - -/* sched_domains SD_CPU_INIT for TILE architecture */ -#define SD_CPU_INIT (struct sched_domain) { \ - .min_interval = 4, \ - .max_interval = 128, \ - .busy_factor = 64, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 2, \ - .idle_idx = 1, \ - .newidle_idx = 0, \ - .wake_idx = 0, \ - .forkexec_idx = 0, \ - \ - .flags = 1*SD_LOAD_BALANCE \ - | 1*SD_BALANCE_NEWIDLE \ - | 1*SD_BALANCE_EXEC \ - | 1*SD_BALANCE_FORK \ - | 0*SD_BALANCE_WAKE \ - | 0*SD_WAKE_AFFINE \ - | 0*SD_SHARE_CPUPOWER \ - | 0*SD_SHARE_PKG_RESOURCES \ - | 0*SD_SERIALIZE \ - , \ - .last_balance = jiffies, \ - .balance_interval = 32, \ -} - /* By definition, we create nodes based on online memory. */ #define node_has_online_mem(nid) 1 diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index 906a76bdb31d..637f2ffaa5f5 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -54,13 +54,6 @@ static DEFINE_PER_CPU(unsigned long, irq_disable_mask) */ static DEFINE_PER_CPU(int, irq_depth); -/* State for allocating IRQs on Gx. */ -#if CHIP_HAS_IPI() -static unsigned long available_irqs = ((1UL << NR_IRQS) - 1) & - (~(1UL << IRQ_RESCHEDULE)); -static DEFINE_SPINLOCK(available_irqs_lock); -#endif - #if CHIP_HAS_IPI() /* Use SPRs to manipulate device interrupts. */ #define mask_irqs(irq_mask) __insn_mtspr(SPR_IPI_MASK_SET_K, irq_mask) @@ -278,38 +271,11 @@ int arch_show_interrupts(struct seq_file *p, int prec) return 0; } -/* - * Generic, controller-independent functions: - */ - #if CHIP_HAS_IPI() -int create_irq(void) +int arch_setup_hwirq(unsigned int irq, int node) { - unsigned long flags; - int result; - - spin_lock_irqsave(&available_irqs_lock, flags); - if (available_irqs == 0) - result = -ENOMEM; - else { - result = __ffs(available_irqs); - available_irqs &= ~(1UL << result); - dynamic_irq_init(result); - } - spin_unlock_irqrestore(&available_irqs_lock, flags); - - return result; + return irq >= NR_IRQS ? -EINVAL : 0; } -EXPORT_SYMBOL(create_irq); -void destroy_irq(unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&available_irqs_lock, flags); - available_irqs |= (1UL << irq); - dynamic_irq_cleanup(irq); - spin_unlock_irqrestore(&available_irqs_lock, flags); -} -EXPORT_SYMBOL(destroy_irq); +void arch_teardown_hwirq(unsigned int irq) { } #endif diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index 077b7bc437e5..e39f9c542807 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -350,10 +350,9 @@ static int tile_init_irqs(struct pci_controller *controller) int cpu; /* Ask the kernel to allocate an IRQ. */ - irq = create_irq(); - if (irq < 0) { + irq = irq_alloc_hwirq(-1); + if (!irq) { pr_err("PCI: no free irq vectors, failed for %d\n", i); - goto free_irqs; } controller->irq_intx_table[i] = irq; @@ -382,7 +381,7 @@ static int tile_init_irqs(struct pci_controller *controller) free_irqs: for (j = 0; j < i; j++) - destroy_irq(controller->irq_intx_table[j]); + irq_free_hwirq(controller->irq_intx_table[j]); return -1; } @@ -1500,9 +1499,9 @@ int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) int irq; int ret; - irq = create_irq(); - if (irq < 0) - return irq; + irq = irq_alloc_hwirq(-1); + if (!irq) + return -ENOSPC; /* * Since we use a 64-bit Mem-Map to accept the MSI write, we fail @@ -1601,11 +1600,11 @@ hv_msi_config_failure: /* Free mem-map */ msi_mem_map_alloc_failure: is_64_failure: - destroy_irq(irq); + irq_free_hwirq(irq); return ret; } void arch_teardown_msi_irq(unsigned int irq) { - destroy_irq(irq); + irq_free_hwirq(irq); } diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index 004ba568d93f..33294fdc402e 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -417,7 +417,7 @@ void __homecache_free_pages(struct page *page, unsigned int order) if (put_page_testzero(page)) { homecache_change_page_home(page, order, PAGE_HOME_HASH); if (order == 0) { - free_hot_cold_page(page, 0); + free_hot_cold_page(page, false); } else { init_page_count(page); __free_pages(page, order); diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c index 0cb3bbaa580c..e514899e1100 100644 --- a/arch/tile/mm/hugetlbpage.c +++ b/arch/tile/mm/hugetlbpage.c @@ -166,11 +166,6 @@ int pud_huge(pud_t pud) return !!(pud_val(pud) & _PAGE_HUGE_PAGE); } -int pmd_huge_support(void) -{ - return 1; -} - struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/unicore32/configs/unicore32_defconfig b/arch/unicore32/configs/unicore32_defconfig index c9dd3198b6f7..45f47f88d86a 100644 --- a/arch/unicore32/configs/unicore32_defconfig +++ b/arch/unicore32/configs/unicore32_defconfig @@ -149,7 +149,6 @@ CONFIG_SND_PCM_OSS=m # USB support CONFIG_USB_ARCH_HAS_HCD=n CONFIG_USB=n -CONFIG_USB_DEVICEFS=n CONFIG_USB_PRINTER=n CONFIG_USB_STORAGE=n # Inventra Highspeed Dual Role Controller diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h index f5e108f4a151..654407e98619 100644 --- a/arch/unicore32/include/asm/pci.h +++ b/arch/unicore32/include/asm/pci.h @@ -18,11 +18,6 @@ #include <asm-generic/pci.h> #include <mach/hardware.h> /* for PCIBIOS_MIN_* */ -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c index 13068ee22f33..bf012b2b71a9 100644 --- a/arch/unicore32/mm/ioremap.c +++ b/arch/unicore32/mm/ioremap.c @@ -144,11 +144,11 @@ void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn, * Don't allow RAM to be mapped */ if (pfn_valid(pfn)) { - printk(KERN_WARNING "BUG: Your driver calls ioremap() on\n" + WARN(1, "BUG: Your driver calls ioremap() on\n" "system memory. This leads to architecturally\n" "unpredictable behaviour, and ioremap() will fail in\n" "the next kernel release. Please fix your driver.\n"); - WARN_ON(1); + return NULL; } type = get_mem_type(mtype); diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 25d2c6f7325e..b660088c220d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -26,7 +26,7 @@ config X86 select ARCH_MIGHT_HAVE_PC_SERIO select HAVE_AOUT if X86_32 select HAVE_UNSTABLE_SCHED_CLOCK - select ARCH_SUPPORTS_NUMA_BALANCING + select ARCH_SUPPORTS_NUMA_BALANCING if X86_64 select ARCH_SUPPORTS_INT128 if X86_64 select ARCH_WANTS_PROT_NUMA_PROT_NONE select HAVE_IDE @@ -41,7 +41,7 @@ config X86 select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if !SWIOTLB + select HAVE_DMA_CONTIGUOUS select HAVE_KRETPROBES select GENERIC_EARLY_IOREMAP select HAVE_OPTPROBES @@ -105,7 +105,7 @@ config X86 select HAVE_ARCH_SECCOMP_FILTER select BUILDTIME_EXTABLE_SORT select GENERIC_CMOS_UPDATE - select HAVE_ARCH_SOFT_DIRTY + select HAVE_ARCH_SOFT_DIRTY if X86_64 select CLOCKSOURCE_WATCHDOG select GENERIC_CLOCKEVENTS select ARCH_CLOCKSOURCE_DATA @@ -261,6 +261,9 @@ config ARCH_HWEIGHT_CFLAGS config ARCH_SUPPORTS_UPROBES def_bool y +config FIX_EARLYCON_MEM + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" @@ -415,7 +418,6 @@ config X86_UV config X86_GOLDFISH bool "Goldfish (Virtual Platform)" - depends on X86_32 depends on X86_EXTENDED_PLATFORM ---help--- Enable support for the Goldfish virtual platform used primarily @@ -831,6 +833,7 @@ config X86_LOCAL_APIC config X86_IO_APIC def_bool y depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI + select GENERIC_IRQ_LEGACY_ALLOC_HWIRQ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" @@ -909,10 +912,27 @@ config VM86 default y depends on X86_32 ---help--- - This option is required by programs like DOSEMU to run 16-bit legacy - code on X86 processors. It also may be needed by software like - XFree86 to initialize some video cards via BIOS. Disabling this - option saves about 6k. + This option is required by programs like DOSEMU to run + 16-bit real mode legacy code on x86 processors. It also may + be needed by software like XFree86 to initialize some video + cards via BIOS. Disabling this option saves about 6K. + +config X86_16BIT + bool "Enable support for 16-bit segments" if EXPERT + default y + ---help--- + This option is required by programs like Wine to run 16-bit + protected mode legacy code on x86 processors. Disabling + this option saves about 300 bytes on i386, or around 6K text + plus 16K runtime memory on x86-64, + +config X86_ESPFIX32 + def_bool y + depends on X86_16BIT && X86_32 + +config X86_ESPFIX64 + def_bool y + depends on X86_16BIT && X86_64 config TOSHIBA tristate "Toshiba Laptop support" @@ -1871,6 +1891,10 @@ config ARCH_ENABLE_SPLIT_PMD_PTLOCK def_bool y depends on X86_64 || X86_PAE +config ARCH_ENABLE_HUGEPAGE_MIGRATION + def_bool y + depends on X86_64 && HUGETLB_PAGE && MIGRATION + menu "Power management and ACPI options" config ARCH_HIBERNATION_HEADER @@ -2375,12 +2399,9 @@ config X86_DMA_REMAP depends on STA2X11 config IOSF_MBI - bool + tristate + default m depends on PCI - ---help--- - To be selected by modules requiring access to the Intel OnChip System - Fabric (IOSF) Sideband MailBox Interface (MBI). For MBI platforms - enumerable by PCI. source "net/Kconfig" diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 4703a6c4b8e3..0331d765c2bb 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -1087,8 +1087,7 @@ struct boot_params *make_boot_params(struct efi_config *c) hdr->type_of_loader = 0x21; /* Convert unicode cmdline to ascii */ - cmdline_ptr = efi_convert_cmdline_to_ascii(sys_table, image, - &options_size); + cmdline_ptr = efi_convert_cmdline(sys_table, image, &options_size); if (!cmdline_ptr) goto fail; hdr->cmd_line_ptr = (unsigned long)cmdline_ptr; diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 0d558ee899ae..2884e0c3e8a5 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -452,7 +452,7 @@ efi32_config: .global efi64_config efi64_config: .fill 11,8,0 - .quad efi_call6 + .quad efi_call .byte 1 #endif /* CONFIG_EFI_STUB */ diff --git a/arch/x86/boot/compressed/string.c b/arch/x86/boot/compressed/string.c index f3c57e341402..00e788be1db9 100644 --- a/arch/x86/boot/compressed/string.c +++ b/arch/x86/boot/compressed/string.c @@ -1,9 +1,5 @@ -#include "misc.h" #include "../string.c" -/* misc.h might pull in string_32.h which has a macro for memcpy. undef that */ -#undef memcpy - #ifdef CONFIG_X86_32 void *memcpy(void *dest, const void *src, size_t n) { diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index 5339040ef86e..493f3fd9f139 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -12,14 +12,9 @@ * Very basic string functions */ -#include "boot.h" +#include <linux/types.h> +#include "ctype.h" -/* - * This file gets included in compressed/string.c which might pull in - * string_32.h and which in turn maps memcmp to __builtin_memcmp(). Undo - * that first. - */ -#undef memcmp int memcmp(const void *s1, const void *s2, size_t len) { u8 diff; diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 619e7f7426c6..32d2e7056c87 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -244,7 +244,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 6181c69b786b..a481dd4755d5 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -239,7 +239,6 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y -CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index 220675795e08..f9e181aaba97 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -383,8 +383,8 @@ int ia32_setup_frame(int sig, struct ksignal *ksig, } else { /* Return stub is in 32bit vsyscall page */ if (current->mm->context.vdso) - restorer = VDSO32_SYMBOL(current->mm->context.vdso, - sigreturn); + restorer = current->mm->context.vdso + + selected_vdso32->sym___kernel_sigreturn; else restorer = &frame->retcode; } @@ -462,8 +462,8 @@ int ia32_setup_rt_frame(int sig, struct ksignal *ksig, if (ksig->ka.sa.sa_flags & SA_RESTORER) restorer = ksig->ka.sa.sa_restorer; else - restorer = VDSO32_SYMBOL(current->mm->context.vdso, - rt_sigreturn); + restorer = current->mm->context.vdso + + selected_vdso32->sym___kernel_rt_sigreturn; put_user_ex(ptr_to_compat(restorer), &frame->pretcode); /* diff --git a/arch/x86/include/asm/acenv.h b/arch/x86/include/asm/acenv.h new file mode 100644 index 000000000000..66873297e9f5 --- /dev/null +++ b/arch/x86/include/asm/acenv.h @@ -0,0 +1,49 @@ +/* + * X86 specific ACPICA environments and implementation + * + * Copyright (C) 2014, Intel Corporation + * Author: Lv Zheng <lv.zheng@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ASM_X86_ACENV_H +#define _ASM_X86_ACENV_H + +#include <asm/special_insns.h> + +/* Asm macros */ + +#define ACPI_FLUSH_CPU_CACHE() wbinvd() + +#ifdef CONFIG_ACPI + +int __acpi_acquire_global_lock(unsigned int *lock); +int __acpi_release_global_lock(unsigned int *lock); + +#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_acquire_global_lock(&facs->global_lock)) + +#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ + ((Acq) = __acpi_release_global_lock(&facs->global_lock)) + +/* + * Math helper asm macros + */ +#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \ + asm("divl %2;" \ + : "=a"(q32), "=d"(r32) \ + : "r"(d32), \ + "0"(n_lo), "1"(n_hi)) + +#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \ + asm("shrl $1,%2 ;" \ + "rcrl $1,%3;" \ + : "=r"(n_hi), "=r"(n_lo) \ + : "0"(n_hi), "1"(n_lo)) + +#endif + +#endif /* _ASM_X86_ACENV_H */ diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index c8c1e700c26e..e06225eda635 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -32,51 +32,6 @@ #include <asm/mpspec.h> #include <asm/realmode.h> -#define COMPILER_DEPENDENT_INT64 long long -#define COMPILER_DEPENDENT_UINT64 unsigned long long - -/* - * Calling conventions: - * - * ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads) - * ACPI_EXTERNAL_XFACE - External ACPI interfaces - * ACPI_INTERNAL_XFACE - Internal ACPI interfaces - * ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces - */ -#define ACPI_SYSTEM_XFACE -#define ACPI_EXTERNAL_XFACE -#define ACPI_INTERNAL_XFACE -#define ACPI_INTERNAL_VAR_XFACE - -/* Asm macros */ - -#define ACPI_FLUSH_CPU_CACHE() wbinvd() - -int __acpi_acquire_global_lock(unsigned int *lock); -int __acpi_release_global_lock(unsigned int *lock); - -#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = __acpi_acquire_global_lock(&facs->global_lock)) - -#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \ - ((Acq) = __acpi_release_global_lock(&facs->global_lock)) - -/* - * Math helper asm macros - */ -#define ACPI_DIV_64_BY_32(n_hi, n_lo, d32, q32, r32) \ - asm("divl %2;" \ - : "=a"(q32), "=d"(r32) \ - : "r"(d32), \ - "0"(n_lo), "1"(n_hi)) - - -#define ACPI_SHIFT_RIGHT_64(n_hi, n_lo) \ - asm("shrl $1,%2 ;" \ - "rcrl $1,%3;" \ - : "=r"(n_hi), "=r"(n_lo) \ - : "0"(n_hi), "1"(n_lo)) - #ifdef CONFIG_ACPI extern int acpi_lapic; extern int acpi_ioapic; diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index b17f4f48ecd7..6dd1c7dd0473 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -7,6 +7,7 @@ #include <asm/alternative.h> #include <asm/cmpxchg.h> #include <asm/rmwcc.h> +#include <asm/barrier.h> /* * Atomic operations that C can't guarantee us. Useful for @@ -243,12 +244,6 @@ static inline void atomic_or_long(unsigned long *v1, unsigned long v2) : : "r" ((unsigned)(mask)), "m" (*(addr)) \ : "memory") -/* Atomic operations are already serializing on x86 */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #ifdef CONFIG_X86_32 # include <asm/atomic64_32.h> #else diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index 69bbb4845020..5c7198cca5ed 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -137,6 +137,10 @@ do { \ #endif +/* Atomic operations are already serializing on x86 */ +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + /* * Stop RDTSC speculation. This is needed when you need to use RDTSC * (or get_cycles or vread that possibly accesses the TSC) in a defined diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 9fc1af74dc83..afcd35d331de 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <asm/alternative.h> #include <asm/rmwcc.h> +#include <asm/barrier.h> #if BITS_PER_LONG == 32 # define _BITOPS_LONG_SHIFT 5 @@ -102,7 +103,7 @@ static inline void __set_bit(long nr, volatile unsigned long *addr) * * clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static __always_inline void @@ -156,9 +157,6 @@ static inline void __clear_bit_unlock(long nr, volatile unsigned long *addr) __clear_bit(nr, addr); } -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - /** * __change_bit - Toggle a bit in memory * @nr: the bit to change diff --git a/arch/x86/include/asm/cmdline.h b/arch/x86/include/asm/cmdline.h new file mode 100644 index 000000000000..e01f7f7ccb0c --- /dev/null +++ b/arch/x86/include/asm/cmdline.h @@ -0,0 +1,6 @@ +#ifndef _ASM_X86_CMDLINE_H +#define _ASM_X86_CMDLINE_H + +int cmdline_find_option_bool(const char *cmdline_ptr, const char *option); + +#endif /* _ASM_X86_CMDLINE_H */ diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 0869434eaf72..1eb5f6433ad8 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -1,6 +1,7 @@ #ifndef _ASM_X86_EFI_H #define _ASM_X86_EFI_H +#include <asm/i387.h> /* * We map the EFI regions needed for runtime services non-contiguously, * with preserved alignment on virtual addresses starting from -4G down @@ -27,91 +28,58 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); -#define efi_call_phys0(f) efi_call_phys(f) -#define efi_call_phys1(f, a1) efi_call_phys(f, a1) -#define efi_call_phys2(f, a1, a2) efi_call_phys(f, a1, a2) -#define efi_call_phys3(f, a1, a2, a3) efi_call_phys(f, a1, a2, a3) -#define efi_call_phys4(f, a1, a2, a3, a4) \ - efi_call_phys(f, a1, a2, a3, a4) -#define efi_call_phys5(f, a1, a2, a3, a4, a5) \ - efi_call_phys(f, a1, a2, a3, a4, a5) -#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6) \ - efi_call_phys(f, a1, a2, a3, a4, a5, a6) /* * Wrap all the virtual calls in a way that forces the parameters on the stack. */ +/* Use this macro if your virtual returns a non-void value */ #define efi_call_virt(f, args...) \ - ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args) - -#define efi_call_virt0(f) efi_call_virt(f) -#define efi_call_virt1(f, a1) efi_call_virt(f, a1) -#define efi_call_virt2(f, a1, a2) efi_call_virt(f, a1, a2) -#define efi_call_virt3(f, a1, a2, a3) efi_call_virt(f, a1, a2, a3) -#define efi_call_virt4(f, a1, a2, a3, a4) \ - efi_call_virt(f, a1, a2, a3, a4) -#define efi_call_virt5(f, a1, a2, a3, a4, a5) \ - efi_call_virt(f, a1, a2, a3, a4, a5) -#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ - efi_call_virt(f, a1, a2, a3, a4, a5, a6) +({ \ + efi_status_t __s; \ + kernel_fpu_begin(); \ + __s = ((efi_##f##_t __attribute__((regparm(0)))*) \ + efi.systab->runtime->f)(args); \ + kernel_fpu_end(); \ + __s; \ +}) + +/* Use this macro if your virtual call does not return any value */ +#define __efi_call_virt(f, args...) \ +({ \ + kernel_fpu_begin(); \ + ((efi_##f##_t __attribute__((regparm(0)))*) \ + efi.systab->runtime->f)(args); \ + kernel_fpu_end(); \ +}) #define efi_ioremap(addr, size, type, attr) ioremap_cache(addr, size) #else /* !CONFIG_X86_32 */ -extern u64 efi_call0(void *fp); -extern u64 efi_call1(void *fp, u64 arg1); -extern u64 efi_call2(void *fp, u64 arg1, u64 arg2); -extern u64 efi_call3(void *fp, u64 arg1, u64 arg2, u64 arg3); -extern u64 efi_call4(void *fp, u64 arg1, u64 arg2, u64 arg3, u64 arg4); -extern u64 efi_call5(void *fp, u64 arg1, u64 arg2, u64 arg3, - u64 arg4, u64 arg5); -extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, - u64 arg4, u64 arg5, u64 arg6); - -#define efi_call_phys0(f) \ - efi_call0((f)) -#define efi_call_phys1(f, a1) \ - efi_call1((f), (u64)(a1)) -#define efi_call_phys2(f, a1, a2) \ - efi_call2((f), (u64)(a1), (u64)(a2)) -#define efi_call_phys3(f, a1, a2, a3) \ - efi_call3((f), (u64)(a1), (u64)(a2), (u64)(a3)) -#define efi_call_phys4(f, a1, a2, a3, a4) \ - efi_call4((f), (u64)(a1), (u64)(a2), (u64)(a3), \ - (u64)(a4)) -#define efi_call_phys5(f, a1, a2, a3, a4, a5) \ - efi_call5((f), (u64)(a1), (u64)(a2), (u64)(a3), \ - (u64)(a4), (u64)(a5)) -#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6) \ - efi_call6((f), (u64)(a1), (u64)(a2), (u64)(a3), \ - (u64)(a4), (u64)(a5), (u64)(a6)) - -#define _efi_call_virtX(x, f, ...) \ +#define EFI_LOADER_SIGNATURE "EL64" + +extern u64 asmlinkage efi_call(void *fp, ...); + +#define efi_call_phys(f, args...) efi_call((f), args) + +#define efi_call_virt(f, ...) \ ({ \ efi_status_t __s; \ \ efi_sync_low_kernel_mappings(); \ preempt_disable(); \ - __s = efi_call##x((void *)efi.systab->runtime->f, __VA_ARGS__); \ + __kernel_fpu_begin(); \ + __s = efi_call((void *)efi.systab->runtime->f, __VA_ARGS__); \ + __kernel_fpu_end(); \ preempt_enable(); \ __s; \ }) -#define efi_call_virt0(f) \ - _efi_call_virtX(0, f) -#define efi_call_virt1(f, a1) \ - _efi_call_virtX(1, f, (u64)(a1)) -#define efi_call_virt2(f, a1, a2) \ - _efi_call_virtX(2, f, (u64)(a1), (u64)(a2)) -#define efi_call_virt3(f, a1, a2, a3) \ - _efi_call_virtX(3, f, (u64)(a1), (u64)(a2), (u64)(a3)) -#define efi_call_virt4(f, a1, a2, a3, a4) \ - _efi_call_virtX(4, f, (u64)(a1), (u64)(a2), (u64)(a3), (u64)(a4)) -#define efi_call_virt5(f, a1, a2, a3, a4, a5) \ - _efi_call_virtX(5, f, (u64)(a1), (u64)(a2), (u64)(a3), (u64)(a4), (u64)(a5)) -#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ - _efi_call_virtX(6, f, (u64)(a1), (u64)(a2), (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) +/* + * All X86_64 virt calls return non-void values. Thus, use non-void call for + * virt calls that would be void on X86_32. + */ +#define __efi_call_virt(f, args...) efi_call_virt(f, args) extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, u32 type, u64 attribute); diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h index 2c71182d30ef..1a055c81d864 100644 --- a/arch/x86/include/asm/elf.h +++ b/arch/x86/include/asm/elf.h @@ -75,7 +75,12 @@ typedef struct user_fxsr_struct elf_fpxregset_t; #include <asm/vdso.h> -extern unsigned int vdso_enabled; +#ifdef CONFIG_X86_64 +extern unsigned int vdso64_enabled; +#endif +#if defined(CONFIG_X86_32) || defined(CONFIG_COMPAT) +extern unsigned int vdso32_enabled; +#endif /* * This is used to ensure we don't load something for the wrong architecture. @@ -269,9 +274,9 @@ extern int force_personality32; struct task_struct; -#define ARCH_DLINFO_IA32(vdso_enabled) \ +#define ARCH_DLINFO_IA32 \ do { \ - if (vdso_enabled) { \ + if (vdso32_enabled) { \ NEW_AUX_ENT(AT_SYSINFO, VDSO_ENTRY); \ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE); \ } \ @@ -281,7 +286,7 @@ do { \ #define STACK_RND_MASK (0x7ff) -#define ARCH_DLINFO ARCH_DLINFO_IA32(vdso_enabled) +#define ARCH_DLINFO ARCH_DLINFO_IA32 /* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ @@ -292,16 +297,17 @@ do { \ #define ARCH_DLINFO \ do { \ - if (vdso_enabled) \ + if (vdso64_enabled) \ NEW_AUX_ENT(AT_SYSINFO_EHDR, \ - (unsigned long)current->mm->context.vdso); \ + (unsigned long __force)current->mm->context.vdso); \ } while (0) +/* As a historical oddity, the x32 and x86_64 vDSOs are controlled together. */ #define ARCH_DLINFO_X32 \ do { \ - if (vdso_enabled) \ + if (vdso64_enabled) \ NEW_AUX_ENT(AT_SYSINFO_EHDR, \ - (unsigned long)current->mm->context.vdso); \ + (unsigned long __force)current->mm->context.vdso); \ } while (0) #define AT_SYSINFO 32 @@ -310,7 +316,7 @@ do { \ if (test_thread_flag(TIF_X32)) \ ARCH_DLINFO_X32; \ else \ - ARCH_DLINFO_IA32(sysctl_vsyscall32) + ARCH_DLINFO_IA32 #define COMPAT_ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE + 0x1000000) @@ -319,18 +325,17 @@ else \ #define VDSO_CURRENT_BASE ((unsigned long)current->mm->context.vdso) #define VDSO_ENTRY \ - ((unsigned long)VDSO32_SYMBOL(VDSO_CURRENT_BASE, vsyscall)) + ((unsigned long)current->mm->context.vdso + \ + selected_vdso32->sym___kernel_vsyscall) struct linux_binprm; #define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 extern int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp); -extern int x32_setup_additional_pages(struct linux_binprm *bprm, - int uses_interp); - -extern int syscall32_setup_pages(struct linux_binprm *, int exstack); -#define compat_arch_setup_additional_pages syscall32_setup_pages +extern int compat_arch_setup_additional_pages(struct linux_binprm *bprm, + int uses_interp); +#define compat_arch_setup_additional_pages compat_arch_setup_additional_pages extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk diff --git a/arch/x86/include/asm/espfix.h b/arch/x86/include/asm/espfix.h new file mode 100644 index 000000000000..99efebb2f69d --- /dev/null +++ b/arch/x86/include/asm/espfix.h @@ -0,0 +1,16 @@ +#ifndef _ASM_X86_ESPFIX_H +#define _ASM_X86_ESPFIX_H + +#ifdef CONFIG_X86_64 + +#include <asm/percpu.h> + +DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_stack); +DECLARE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr); + +extern void init_espfix_bsp(void); +extern void init_espfix_ap(void); + +#endif /* CONFIG_X86_64 */ + +#endif /* _ASM_X86_ESPFIX_H */ diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 43f482a0db37..b0910f97a3ea 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -24,7 +24,7 @@ #include <linux/threads.h> #include <asm/kmap_types.h> #else -#include <asm/vsyscall.h> +#include <uapi/asm/vsyscall.h> #endif /* @@ -41,7 +41,8 @@ extern unsigned long __FIXADDR_TOP; #define FIXADDR_TOP ((unsigned long)__FIXADDR_TOP) #else -#define FIXADDR_TOP (VSYSCALL_END-PAGE_SIZE) +#define FIXADDR_TOP (round_up(VSYSCALL_ADDR + PAGE_SIZE, 1<<PMD_SHIFT) - \ + PAGE_SIZE) #endif @@ -68,11 +69,7 @@ enum fixed_addresses { #ifdef CONFIG_X86_32 FIX_HOLE, #else - VSYSCALL_LAST_PAGE, - VSYSCALL_FIRST_PAGE = VSYSCALL_LAST_PAGE - + ((VSYSCALL_END-VSYSCALL_START) >> PAGE_SHIFT) - 1, - VVAR_PAGE, - VSYSCALL_HPET, + VSYSCALL_PAGE = (FIXADDR_TOP - VSYSCALL_ADDR) >> PAGE_SHIFT, #ifdef CONFIG_PARAVIRT_CLOCK PVCLOCK_FIXMAP_BEGIN, PVCLOCK_FIXMAP_END = PVCLOCK_FIXMAP_BEGIN+PVCLOCK_VSYSCALL_NR_PAGES-1, diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h index cea1c76d49bf..115e3689cd53 100644 --- a/arch/x86/include/asm/fpu-internal.h +++ b/arch/x86/include/asm/fpu-internal.h @@ -87,22 +87,22 @@ static inline int is_x32_frame(void) static __always_inline __pure bool use_eager_fpu(void) { - return static_cpu_has(X86_FEATURE_EAGER_FPU); + return static_cpu_has_safe(X86_FEATURE_EAGER_FPU); } static __always_inline __pure bool use_xsaveopt(void) { - return static_cpu_has(X86_FEATURE_XSAVEOPT); + return static_cpu_has_safe(X86_FEATURE_XSAVEOPT); } static __always_inline __pure bool use_xsave(void) { - return static_cpu_has(X86_FEATURE_XSAVE); + return static_cpu_has_safe(X86_FEATURE_XSAVE); } static __always_inline __pure bool use_fxsr(void) { - return static_cpu_has(X86_FEATURE_FXSR); + return static_cpu_has_safe(X86_FEATURE_FXSR); } static inline void fx_finit(struct i387_fxsave_struct *fx) @@ -293,7 +293,7 @@ static inline int restore_fpu_checking(struct task_struct *tsk) /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. Clear the x87 state here by setting it to fixed values. "m" is a random variable that should be in L1 */ - if (unlikely(static_cpu_has(X86_FEATURE_FXSAVE_LEAK))) { + if (unlikely(static_cpu_has_safe(X86_FEATURE_FXSAVE_LEAK))) { asm volatile( "fnclex\n\t" "emms\n\t" diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index a307b7530e54..4615906d83df 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -190,8 +190,8 @@ extern void (*__initconst interrupt[NR_VECTORS-FIRST_EXTERNAL_VECTOR])(void); #define trace_interrupt interrupt #endif -#define VECTOR_UNDEFINED -1 -#define VECTOR_RETRIGGERED -2 +#define VECTOR_UNDEFINED (-1) +#define VECTOR_RETRIGGERED (-2) typedef int vector_irq_t[NR_VECTORS]; DECLARE_PER_CPU(vector_irq_t, vector_irq); diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 459e50a424d1..90f97b4b9347 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -168,8 +168,6 @@ extern int save_ioapic_entries(void); extern void mask_ioapic_entries(void); extern int restore_ioapic_entries(void); -extern int get_nr_irqs_gsi(void); - extern void setup_ioapic_ids_from_mpc(void); extern void setup_ioapic_ids_from_mpc_nocheck(void); diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h index 8e71c7941767..57995f0596a6 100644 --- a/arch/x86/include/asm/iosf_mbi.h +++ b/arch/x86/include/asm/iosf_mbi.h @@ -50,6 +50,32 @@ #define BT_MBI_PCIE_READ 0x00 #define BT_MBI_PCIE_WRITE 0x01 +/* Quark available units */ +#define QRK_MBI_UNIT_HBA 0x00 +#define QRK_MBI_UNIT_HB 0x03 +#define QRK_MBI_UNIT_RMU 0x04 +#define QRK_MBI_UNIT_MM 0x05 +#define QRK_MBI_UNIT_MMESRAM 0x05 +#define QRK_MBI_UNIT_SOC 0x31 + +/* Quark read/write opcodes */ +#define QRK_MBI_HBA_READ 0x10 +#define QRK_MBI_HBA_WRITE 0x11 +#define QRK_MBI_HB_READ 0x10 +#define QRK_MBI_HB_WRITE 0x11 +#define QRK_MBI_RMU_READ 0x10 +#define QRK_MBI_RMU_WRITE 0x11 +#define QRK_MBI_MM_READ 0x10 +#define QRK_MBI_MM_WRITE 0x11 +#define QRK_MBI_MMESRAM_READ 0x12 +#define QRK_MBI_MMESRAM_WRITE 0x13 +#define QRK_MBI_SOC_READ 0x06 +#define QRK_MBI_SOC_WRITE 0x07 + +#if IS_ENABLED(CONFIG_IOSF_MBI) + +bool iosf_mbi_available(void); + /** * iosf_mbi_read() - MailBox Interface read command * @port: port indicating subunit being accessed @@ -87,4 +113,33 @@ int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr); */ int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask); +#else /* CONFIG_IOSF_MBI is not enabled */ +static inline +bool iosf_mbi_available(void) +{ + return false; +} + +static inline +int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr) +{ + WARN(1, "IOSF_MBI driver not available"); + return -EPERM; +} + +static inline +int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr) +{ + WARN(1, "IOSF_MBI driver not available"); + return -EPERM; +} + +static inline +int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask) +{ + WARN(1, "IOSF_MBI driver not available"); + return -EPERM; +} +#endif /* CONFIG_IOSF_MBI */ + #endif /* IOSF_MBI_SYMS_H */ diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h index d806b228d2c0..b7747c4c2cf2 100644 --- a/arch/x86/include/asm/irq_remapping.h +++ b/arch/x86/include/asm/irq_remapping.h @@ -103,4 +103,7 @@ static inline bool setup_remapped_irq(int irq, } #endif /* CONFIG_IRQ_REMAP */ +#define dmar_alloc_hwirq() irq_alloc_hwirq(-1) +#define dmar_free_hwirq irq_free_hwirq + #endif /* __X86_IRQ_REMAPPING_H */ diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h index 24ec1216596e..a04fe4eb237d 100644 --- a/arch/x86/include/asm/kvm_emulate.h +++ b/arch/x86/include/asm/kvm_emulate.h @@ -189,7 +189,6 @@ struct x86_emulate_ops { void (*set_idt)(struct x86_emulate_ctxt *ctxt, struct desc_ptr *dt); ulong (*get_cr)(struct x86_emulate_ctxt *ctxt, int cr); int (*set_cr)(struct x86_emulate_ctxt *ctxt, int cr, ulong val); - void (*set_rflags)(struct x86_emulate_ctxt *ctxt, ulong val); int (*cpl)(struct x86_emulate_ctxt *ctxt); int (*get_dr)(struct x86_emulate_ctxt *ctxt, int dr, ulong *dest); int (*set_dr)(struct x86_emulate_ctxt *ctxt, int dr, ulong value); diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 7de069afb382..49314155b66c 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -50,11 +50,7 @@ | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM \ | X86_CR0_NW | X86_CR0_CD | X86_CR0_PG)) -#define CR3_PAE_RESERVED_BITS ((X86_CR3_PWT | X86_CR3_PCD) - 1) -#define CR3_NONPAE_RESERVED_BITS ((PAGE_SIZE-1) & ~(X86_CR3_PWT | X86_CR3_PCD)) -#define CR3_PCID_ENABLED_RESERVED_BITS 0xFFFFFF0000000000ULL -#define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS | \ - 0xFFFFFF0000000000ULL) +#define CR3_L_MODE_RESERVED_BITS 0xFFFFFF0000000000ULL #define CR4_RESERVED_BITS \ (~(unsigned long)(X86_CR4_VME | X86_CR4_PVI | X86_CR4_TSD | X86_CR4_DE\ | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_MCE \ @@ -134,7 +130,6 @@ enum kvm_reg_ex { VCPU_EXREG_PDPTR = NR_VCPU_REGS, VCPU_EXREG_CR3, VCPU_EXREG_RFLAGS, - VCPU_EXREG_CPL, VCPU_EXREG_SEGMENTS, }; diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 6e4ce2df87cf..958b90f761e5 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -176,8 +176,6 @@ int mce_available(struct cpuinfo_x86 *c); DECLARE_PER_CPU(unsigned, mce_exception_count); DECLARE_PER_CPU(unsigned, mce_poll_count); -extern atomic_t mce_entry; - typedef DECLARE_BITMAP(mce_banks_t, MAX_NR_BANKS); DECLARE_PER_CPU(mce_banks_t, mce_poll_banks); diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h index b59827e76529..64dc362506b7 100644 --- a/arch/x86/include/asm/microcode.h +++ b/arch/x86/include/asm/microcode.h @@ -25,6 +25,7 @@ struct cpu_signature { struct device; enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND }; +extern bool dis_ucode_ldr; struct microcode_ops { enum ucode_state (*request_microcode_user) (int cpu, diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h index 5f55e6962769..876e74e8eec7 100644 --- a/arch/x86/include/asm/mmu.h +++ b/arch/x86/include/asm/mmu.h @@ -18,7 +18,7 @@ typedef struct { #endif struct mutex lock; - void *vdso; + void __user *vdso; } mm_context_t; #ifdef CONFIG_SMP diff --git a/arch/x86/include/asm/page_64_types.h b/arch/x86/include/asm/page_64_types.h index 8de6d9cf3b95..678205195ae1 100644 --- a/arch/x86/include/asm/page_64_types.h +++ b/arch/x86/include/asm/page_64_types.h @@ -1,7 +1,7 @@ #ifndef _ASM_X86_PAGE_64_DEFS_H #define _ASM_X86_PAGE_64_DEFS_H -#define THREAD_SIZE_ORDER 1 +#define THREAD_SIZE_ORDER 2 #define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define CURRENT_MASK (~(THREAD_SIZE - 1)) diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 96ae4f4040bb..0892ea0e683f 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -68,7 +68,6 @@ void pcibios_config_init(void); void pcibios_scan_root(int bus); void pcibios_set_master(struct pci_dev *dev); -void pcibios_penalize_isa_irq(int irq, int active); struct irq_routing_table *pcibios_get_irq_routing_table(void); int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq); diff --git a/arch/x86/include/asm/pgtable-2level.h b/arch/x86/include/asm/pgtable-2level.h index 0d193e234647..206a87fdd22d 100644 --- a/arch/x86/include/asm/pgtable-2level.h +++ b/arch/x86/include/asm/pgtable-2level.h @@ -62,66 +62,14 @@ static inline unsigned long pte_bitop(unsigned long value, unsigned int rightshi return ((value >> rightshift) & mask) << leftshift; } -#ifdef CONFIG_MEM_SOFT_DIRTY - -/* - * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE, _PAGE_BIT_SOFT_DIRTY and - * _PAGE_BIT_PROTNONE are taken, split up the 28 bits of offset - * into this range. - */ -#define PTE_FILE_MAX_BITS 28 -#define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1) -#define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1) -#define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1) -#define PTE_FILE_SHIFT4 (_PAGE_BIT_SOFT_DIRTY + 1) -#define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1) -#define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1) -#define PTE_FILE_BITS3 (PTE_FILE_SHIFT4 - PTE_FILE_SHIFT3 - 1) - -#define PTE_FILE_MASK1 ((1U << PTE_FILE_BITS1) - 1) -#define PTE_FILE_MASK2 ((1U << PTE_FILE_BITS2) - 1) -#define PTE_FILE_MASK3 ((1U << PTE_FILE_BITS3) - 1) - -#define PTE_FILE_LSHIFT2 (PTE_FILE_BITS1) -#define PTE_FILE_LSHIFT3 (PTE_FILE_BITS1 + PTE_FILE_BITS2) -#define PTE_FILE_LSHIFT4 (PTE_FILE_BITS1 + PTE_FILE_BITS2 + PTE_FILE_BITS3) - -static __always_inline pgoff_t pte_to_pgoff(pte_t pte) -{ - return (pgoff_t) - (pte_bitop(pte.pte_low, PTE_FILE_SHIFT1, PTE_FILE_MASK1, 0) + - pte_bitop(pte.pte_low, PTE_FILE_SHIFT2, PTE_FILE_MASK2, PTE_FILE_LSHIFT2) + - pte_bitop(pte.pte_low, PTE_FILE_SHIFT3, PTE_FILE_MASK3, PTE_FILE_LSHIFT3) + - pte_bitop(pte.pte_low, PTE_FILE_SHIFT4, -1UL, PTE_FILE_LSHIFT4)); -} - -static __always_inline pte_t pgoff_to_pte(pgoff_t off) -{ - return (pte_t){ - .pte_low = - pte_bitop(off, 0, PTE_FILE_MASK1, PTE_FILE_SHIFT1) + - pte_bitop(off, PTE_FILE_LSHIFT2, PTE_FILE_MASK2, PTE_FILE_SHIFT2) + - pte_bitop(off, PTE_FILE_LSHIFT3, PTE_FILE_MASK3, PTE_FILE_SHIFT3) + - pte_bitop(off, PTE_FILE_LSHIFT4, -1UL, PTE_FILE_SHIFT4) + - _PAGE_FILE, - }; -} - -#else /* CONFIG_MEM_SOFT_DIRTY */ - /* * Bits _PAGE_BIT_PRESENT, _PAGE_BIT_FILE and _PAGE_BIT_PROTNONE are taken, * split up the 29 bits of offset into this range. */ #define PTE_FILE_MAX_BITS 29 #define PTE_FILE_SHIFT1 (_PAGE_BIT_PRESENT + 1) -#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define PTE_FILE_SHIFT2 (_PAGE_BIT_FILE + 1) #define PTE_FILE_SHIFT3 (_PAGE_BIT_PROTNONE + 1) -#else -#define PTE_FILE_SHIFT2 (_PAGE_BIT_PROTNONE + 1) -#define PTE_FILE_SHIFT3 (_PAGE_BIT_FILE + 1) -#endif #define PTE_FILE_BITS1 (PTE_FILE_SHIFT2 - PTE_FILE_SHIFT1 - 1) #define PTE_FILE_BITS2 (PTE_FILE_SHIFT3 - PTE_FILE_SHIFT2 - 1) @@ -150,16 +98,9 @@ static __always_inline pte_t pgoff_to_pte(pgoff_t off) }; } -#endif /* CONFIG_MEM_SOFT_DIRTY */ - /* Encode and de-code a swap entry */ -#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1) #define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1) -#else -#define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1) -#define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1) -#endif #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index b459ddf27d64..0ec056012618 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -131,7 +131,8 @@ static inline int pte_exec(pte_t pte) static inline int pte_special(pte_t pte) { - return pte_flags(pte) & _PAGE_SPECIAL; + return (pte_flags(pte) & (_PAGE_PRESENT|_PAGE_SPECIAL)) == + (_PAGE_PRESENT|_PAGE_SPECIAL); } static inline unsigned long pte_pfn(pte_t pte) @@ -296,6 +297,7 @@ static inline pmd_t pmd_mknotpresent(pmd_t pmd) return pmd_clear_flags(pmd, _PAGE_PRESENT); } +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY static inline int pte_soft_dirty(pte_t pte) { return pte_flags(pte) & _PAGE_SOFT_DIRTY; @@ -331,6 +333,8 @@ static inline int pte_file_soft_dirty(pte_t pte) return pte_flags(pte) & _PAGE_SOFT_DIRTY; } +#endif /* CONFIG_HAVE_ARCH_SOFT_DIRTY */ + /* * Mask out unsupported bits in a present pgprot. Non-present pgprots * can use those bits for other purposes, so leave them be. @@ -452,6 +456,12 @@ static inline int pte_present(pte_t a) _PAGE_NUMA); } +#define pte_present_nonuma pte_present_nonuma +static inline int pte_present_nonuma(pte_t a) +{ + return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE); +} + #define pte_accessible pte_accessible static inline bool pte_accessible(struct mm_struct *mm, pte_t a) { @@ -858,23 +868,25 @@ static inline void update_mmu_cache_pmd(struct vm_area_struct *vma, { } +#ifdef CONFIG_HAVE_ARCH_SOFT_DIRTY static inline pte_t pte_swp_mksoft_dirty(pte_t pte) { - VM_BUG_ON(pte_present(pte)); + VM_BUG_ON(pte_present_nonuma(pte)); return pte_set_flags(pte, _PAGE_SWP_SOFT_DIRTY); } static inline int pte_swp_soft_dirty(pte_t pte) { - VM_BUG_ON(pte_present(pte)); + VM_BUG_ON(pte_present_nonuma(pte)); return pte_flags(pte) & _PAGE_SWP_SOFT_DIRTY; } static inline pte_t pte_swp_clear_soft_dirty(pte_t pte) { - VM_BUG_ON(pte_present(pte)); + VM_BUG_ON(pte_present_nonuma(pte)); return pte_clear_flags(pte, _PAGE_SWP_SOFT_DIRTY); } +#endif #include <asm-generic/pgtable.h> #endif /* __ASSEMBLY__ */ diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index e22c1dbf7feb..5be9063545d2 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -143,12 +143,12 @@ static inline int pgd_large(pgd_t pgd) { return 0; } #define pte_unmap(pte) ((void)(pte))/* NOP */ /* Encode and de-code a swap entry */ -#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE #define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1) -#define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1) +#ifdef CONFIG_NUMA_BALANCING +/* Automatic NUMA balancing needs to be distinguishable from swap entries */ +#define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 2) #else -#define SWP_TYPE_BITS (_PAGE_BIT_PROTNONE - _PAGE_BIT_PRESENT - 1) -#define SWP_OFFSET_SHIFT (_PAGE_BIT_FILE + 1) +#define SWP_OFFSET_SHIFT (_PAGE_BIT_PROTNONE + 1) #endif #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h index c883bf726398..7166e25ecb57 100644 --- a/arch/x86/include/asm/pgtable_64_types.h +++ b/arch/x86/include/asm/pgtable_64_types.h @@ -61,6 +61,8 @@ typedef struct { pteval_t pte; } pte_t; #define MODULES_VADDR (__START_KERNEL_map + KERNEL_IMAGE_SIZE) #define MODULES_END _AC(0xffffffffff000000, UL) #define MODULES_LEN (MODULES_END - MODULES_VADDR) +#define ESPFIX_PGD_ENTRY _AC(-2, UL) +#define ESPFIX_BASE_ADDR (ESPFIX_PGD_ENTRY << PGDIR_SHIFT) #define EARLY_DYNAMIC_PAGE_TABLES 64 diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index eb3d44945133..f216963760e5 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -16,15 +16,26 @@ #define _PAGE_BIT_PSE 7 /* 4 MB (or 2MB) page */ #define _PAGE_BIT_PAT 7 /* on 4KB pages */ #define _PAGE_BIT_GLOBAL 8 /* Global TLB entry PPro+ */ -#define _PAGE_BIT_UNUSED1 9 /* available for programmer */ -#define _PAGE_BIT_IOMAP 10 /* flag used to indicate IO mapping */ -#define _PAGE_BIT_HIDDEN 11 /* hidden by kmemcheck */ +#define _PAGE_BIT_SOFTW1 9 /* available for programmer */ +#define _PAGE_BIT_SOFTW2 10 /* " */ +#define _PAGE_BIT_SOFTW3 11 /* " */ #define _PAGE_BIT_PAT_LARGE 12 /* On 2MB or 1GB pages */ -#define _PAGE_BIT_SPECIAL _PAGE_BIT_UNUSED1 -#define _PAGE_BIT_CPA_TEST _PAGE_BIT_UNUSED1 -#define _PAGE_BIT_SPLITTING _PAGE_BIT_UNUSED1 /* only valid on a PSE pmd */ +#define _PAGE_BIT_SPECIAL _PAGE_BIT_SOFTW1 +#define _PAGE_BIT_CPA_TEST _PAGE_BIT_SOFTW1 +#define _PAGE_BIT_SPLITTING _PAGE_BIT_SOFTW2 /* only valid on a PSE pmd */ +#define _PAGE_BIT_IOMAP _PAGE_BIT_SOFTW2 /* flag used to indicate IO mapping */ +#define _PAGE_BIT_HIDDEN _PAGE_BIT_SOFTW3 /* hidden by kmemcheck */ +#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_SOFTW3 /* software dirty tracking */ #define _PAGE_BIT_NX 63 /* No execute: only valid after cpuid check */ +/* + * Swap offsets on configurations that allow automatic NUMA balancing use the + * bits after _PAGE_BIT_GLOBAL. To uniquely distinguish NUMA hinting PTEs from + * swap entries, we use the first bit after _PAGE_BIT_GLOBAL and shrink the + * maximum possible swap space from 16TB to 8TB. + */ +#define _PAGE_BIT_NUMA (_PAGE_BIT_GLOBAL+1) + /* If _PAGE_BIT_PRESENT is clear, we use these: */ /* - if the user mapped it with PROT_NONE; pte_present gives true */ #define _PAGE_BIT_PROTNONE _PAGE_BIT_GLOBAL @@ -40,7 +51,7 @@ #define _PAGE_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_DIRTY) #define _PAGE_PSE (_AT(pteval_t, 1) << _PAGE_BIT_PSE) #define _PAGE_GLOBAL (_AT(pteval_t, 1) << _PAGE_BIT_GLOBAL) -#define _PAGE_UNUSED1 (_AT(pteval_t, 1) << _PAGE_BIT_UNUSED1) +#define _PAGE_SOFTW1 (_AT(pteval_t, 1) << _PAGE_BIT_SOFTW1) #define _PAGE_IOMAP (_AT(pteval_t, 1) << _PAGE_BIT_IOMAP) #define _PAGE_PAT (_AT(pteval_t, 1) << _PAGE_BIT_PAT) #define _PAGE_PAT_LARGE (_AT(pteval_t, 1) << _PAGE_BIT_PAT_LARGE) @@ -61,8 +72,6 @@ * they do not conflict with each other. */ -#define _PAGE_BIT_SOFT_DIRTY _PAGE_BIT_HIDDEN - #ifdef CONFIG_MEM_SOFT_DIRTY #define _PAGE_SOFT_DIRTY (_AT(pteval_t, 1) << _PAGE_BIT_SOFT_DIRTY) #else @@ -70,6 +79,21 @@ #endif /* + * _PAGE_NUMA distinguishes between a numa hinting minor fault and a page + * that is not present. The hinting fault gathers numa placement statistics + * (see pte_numa()). The bit is always zero when the PTE is not present. + * + * The bit picked must be always zero when the pmd is present and not + * present, so that we don't lose information when we set it while + * atomically clearing the present bit. + */ +#ifdef CONFIG_NUMA_BALANCING +#define _PAGE_NUMA (_AT(pteval_t, 1) << _PAGE_BIT_NUMA) +#else +#define _PAGE_NUMA (_AT(pteval_t, 0)) +#endif + +/* * Tracking soft dirty bit when a page goes to a swap is tricky. * We need a bit which can be stored in pte _and_ not conflict * with swap entry format. On x86 bits 6 and 7 are *not* involved @@ -94,26 +118,6 @@ #define _PAGE_FILE (_AT(pteval_t, 1) << _PAGE_BIT_FILE) #define _PAGE_PROTNONE (_AT(pteval_t, 1) << _PAGE_BIT_PROTNONE) -/* - * _PAGE_NUMA indicates that this page will trigger a numa hinting - * minor page fault to gather numa placement statistics (see - * pte_numa()). The bit picked (8) is within the range between - * _PAGE_FILE (6) and _PAGE_PROTNONE (8) bits. Therefore, it doesn't - * require changes to the swp entry format because that bit is always - * zero when the pte is not present. - * - * The bit picked must be always zero when the pmd is present and not - * present, so that we don't lose information when we set it while - * atomically clearing the present bit. - * - * Because we shared the same bit (8) with _PAGE_PROTNONE this can be - * interpreted as _PAGE_NUMA only in places that _PAGE_PROTNONE - * couldn't reach, like handle_mm_fault() (see access_error in - * arch/x86/mm/fault.c, the vma protection must not be PROT_NONE for - * handle_mm_fault() to be invoked). - */ -#define _PAGE_NUMA _PAGE_PROTNONE - #define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ _PAGE_ACCESSED | _PAGE_DIRTY) #define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \ @@ -122,8 +126,8 @@ /* Set of bits not changed in pte_modify */ #define _PAGE_CHG_MASK (PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT | \ _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY | \ - _PAGE_SOFT_DIRTY) -#define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE) + _PAGE_SOFT_DIRTY | _PAGE_NUMA) +#define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE | _PAGE_NUMA) #define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT) #define _PAGE_CACHE_WB (0) diff --git a/arch/x86/include/asm/proto.h b/arch/x86/include/asm/proto.h index 6fd3fd769796..a90f8972dad5 100644 --- a/arch/x86/include/asm/proto.h +++ b/arch/x86/include/asm/proto.h @@ -12,8 +12,6 @@ void ia32_syscall(void); void ia32_cstar_target(void); void ia32_sysenter_target(void); -void syscall32_cpu_init(void); - void x86_configure_nx(void); void x86_report_nx(void); diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index 9264f04a4c55..ff4e7b236e21 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -59,6 +59,8 @@ static inline void x86_ce4100_early_setup(void) { } #ifndef _SETUP +#include <asm/espfix.h> + /* * This is set up by the setup-routine at boot-time */ diff --git a/arch/x86/include/asm/swiotlb.h b/arch/x86/include/asm/swiotlb.h index 977f1761a25d..ab05d73e2bb7 100644 --- a/arch/x86/include/asm/swiotlb.h +++ b/arch/x86/include/asm/swiotlb.h @@ -29,4 +29,11 @@ static inline void pci_swiotlb_late_init(void) static inline void dma_mark_clean(void *addr, size_t size) {} +extern void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flags, + struct dma_attrs *attrs); +extern void x86_swiotlb_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_addr, + struct dma_attrs *attrs); + #endif /* _ASM_X86_SWIOTLB_H */ diff --git a/arch/x86/include/asm/sync_bitops.h b/arch/x86/include/asm/sync_bitops.h index 05af3b31d522..f28a24b51dc7 100644 --- a/arch/x86/include/asm/sync_bitops.h +++ b/arch/x86/include/asm/sync_bitops.h @@ -41,7 +41,7 @@ static inline void sync_set_bit(long nr, volatile unsigned long *addr) * * sync_clear_bit() is atomic and may not be reordered. However, it does * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() + * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic() * in order to ensure changes are visible on other processors. */ static inline void sync_clear_bit(long nr, volatile unsigned long *addr) diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 47e5de25ba79..854053889d4d 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -83,6 +83,7 @@ struct thread_info { #define TIF_FORK 18 /* ret_from_fork */ #define TIF_NOHZ 19 /* in adaptive nohz mode */ #define TIF_MEMDIE 20 /* is terminating due to OOM killer */ +#define TIF_POLLING_NRFLAG 21 /* idle is polling for TIF_NEED_RESCHED */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ #define TIF_FORCED_TF 24 /* true if TF in eflags artificially */ #define TIF_BLOCKSTEP 25 /* set when we want DEBUGCTLMSR_BTF */ @@ -106,6 +107,7 @@ struct thread_info { #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) #define _TIF_NOHZ (1 << TIF_NOHZ) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_IO_BITMAP (1 << TIF_IO_BITMAP) #define _TIF_FORCED_TF (1 << TIF_FORCED_TF) #define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP) @@ -191,8 +193,6 @@ static inline struct thread_info *current_thread_info(void) * have to worry about atomic accesses. */ #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ -#define TS_POLLING 0x0004 /* idle task polling need_resched, - skip sending interrupt */ #define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #ifndef __ASSEMBLY__ diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h index 58d66fe06b61..8ba18842c48e 100644 --- a/arch/x86/include/asm/traps.h +++ b/arch/x86/include/asm/traps.h @@ -74,6 +74,11 @@ dotraplinkage void do_general_protection(struct pt_regs *, long); dotraplinkage void do_page_fault(struct pt_regs *, unsigned long); #ifdef CONFIG_TRACING dotraplinkage void trace_do_page_fault(struct pt_regs *, unsigned long); +#else +static inline void trace_do_page_fault(struct pt_regs *regs, unsigned long error) +{ + do_page_fault(regs, error); +} #endif dotraplinkage void do_spurious_interrupt_bug(struct pt_regs *, long); dotraplinkage void do_coprocessor_error(struct pt_regs *, long); diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h index 3f556c6a0157..2b19caa4081c 100644 --- a/arch/x86/include/asm/unistd.h +++ b/arch/x86/include/asm/unistd.h @@ -41,7 +41,6 @@ # define __ARCH_WANT_SYS_OLD_GETRLIMIT # define __ARCH_WANT_SYS_OLD_UNAME # define __ARCH_WANT_SYS_PAUSE -# define __ARCH_WANT_SYS_SGETMASK # define __ARCH_WANT_SYS_SIGNAL # define __ARCH_WANT_SYS_SIGPENDING # define __ARCH_WANT_SYS_SIGPROCMASK diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h index 3087ea9c5f2e..93bee7b93854 100644 --- a/arch/x86/include/asm/uprobes.h +++ b/arch/x86/include/asm/uprobes.h @@ -33,15 +33,27 @@ typedef u8 uprobe_opcode_t; #define UPROBE_SWBP_INSN 0xcc #define UPROBE_SWBP_INSN_SIZE 1 +struct uprobe_xol_ops; + struct arch_uprobe { - u16 fixups; union { u8 insn[MAX_UINSN_BYTES]; u8 ixol[MAX_UINSN_BYTES]; }; + + u16 fixups; + const struct uprobe_xol_ops *ops; + + union { #ifdef CONFIG_X86_64 - unsigned long rip_rela_target_address; + unsigned long rip_rela_target_address; #endif + struct { + s32 offs; + u8 ilen; + u8 opc1; + } branch; + }; }; struct arch_uprobe_task { diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index a30836c8ac4d..c63e925fd6b7 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -5,7 +5,7 @@ * * SGI UV architectural definitions * - * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2014 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_HUB_H @@ -204,16 +204,6 @@ static inline int is_uvx_hub(void) return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE; } -static inline int is_uv2_1_hub(void) -{ - return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE; -} - -static inline int is_uv2_2_hub(void) -{ - return uv_hub_info->hub_revision == UV2_HUB_REVISION_BASE + 1; -} - union uvh_apicid { unsigned long v; struct uvh_apicid_s { diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index e42249bcf7e1..ddd8db6b6e70 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -5,7 +5,7 @@ * * SGI UV MMR definitions * - * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2014 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_MMRS_H @@ -2803,6 +2803,46 @@ union uv1h_lb_target_physical_apic_id_mask_u { }; /* ========================================================================= */ +/* UV3H_GR0_GAM_GR_CONFIG */ +/* ========================================================================= */ +#define UV3H_GR0_GAM_GR_CONFIG 0xc00028UL + +#define UV3H_GR0_GAM_GR_CONFIG_M_SKT_SHFT 0 +#define UV3H_GR0_GAM_GR_CONFIG_SUBSPACE_SHFT 10 +#define UV3H_GR0_GAM_GR_CONFIG_M_SKT_MASK 0x000000000000003fUL +#define UV3H_GR0_GAM_GR_CONFIG_SUBSPACE_MASK 0x0000000000000400UL + +union uv3h_gr0_gam_gr_config_u { + unsigned long v; + struct uv3h_gr0_gam_gr_config_s { + unsigned long m_skt:6; /* RW */ + unsigned long undef_6_9:4; /* Undefined */ + unsigned long subspace:1; /* RW */ + unsigned long reserved:53; + } s3; +}; + +/* ========================================================================= */ +/* UV3H_GR1_GAM_GR_CONFIG */ +/* ========================================================================= */ +#define UV3H_GR1_GAM_GR_CONFIG 0x1000028UL + +#define UV3H_GR1_GAM_GR_CONFIG_M_SKT_SHFT 0 +#define UV3H_GR1_GAM_GR_CONFIG_SUBSPACE_SHFT 10 +#define UV3H_GR1_GAM_GR_CONFIG_M_SKT_MASK 0x000000000000003fUL +#define UV3H_GR1_GAM_GR_CONFIG_SUBSPACE_MASK 0x0000000000000400UL + +union uv3h_gr1_gam_gr_config_u { + unsigned long v; + struct uv3h_gr1_gam_gr_config_s { + unsigned long m_skt:6; /* RW */ + unsigned long undef_6_9:4; /* Undefined */ + unsigned long subspace:1; /* RW */ + unsigned long reserved:53; + } s3; +}; + +/* ========================================================================= */ /* UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR */ /* ========================================================================= */ #define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR 0x1603000UL diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h index d1dc55404ff1..30be253dd283 100644 --- a/arch/x86/include/asm/vdso.h +++ b/arch/x86/include/asm/vdso.h @@ -3,63 +3,51 @@ #include <asm/page_types.h> #include <linux/linkage.h> +#include <linux/init.h> -#ifdef __ASSEMBLER__ +#ifndef __ASSEMBLER__ -#define DEFINE_VDSO_IMAGE(symname, filename) \ -__PAGE_ALIGNED_DATA ; \ - .globl symname##_start, symname##_end ; \ - .align PAGE_SIZE ; \ - symname##_start: ; \ - .incbin filename ; \ - symname##_end: ; \ - .align PAGE_SIZE /* extra data here leaks to userspace. */ ; \ - \ -.previous ; \ - \ - .globl symname##_pages ; \ - .bss ; \ - .align 8 ; \ - .type symname##_pages, @object ; \ - symname##_pages: ; \ - .zero (symname##_end - symname##_start + PAGE_SIZE - 1) / PAGE_SIZE * (BITS_PER_LONG / 8) ; \ - .size symname##_pages, .-symname##_pages +#include <linux/mm_types.h> -#else +struct vdso_image { + void *data; + unsigned long size; /* Always a multiple of PAGE_SIZE */ -#define DECLARE_VDSO_IMAGE(symname) \ - extern char symname##_start[], symname##_end[]; \ - extern struct page *symname##_pages[] + /* text_mapping.pages is big enough for data/size page pointers */ + struct vm_special_mapping text_mapping; -#if defined CONFIG_X86_32 || defined CONFIG_COMPAT + unsigned long alt, alt_len; -#include <asm/vdso32.h> + unsigned long sym_end_mapping; /* Total size of the mapping */ -DECLARE_VDSO_IMAGE(vdso32_int80); -#ifdef CONFIG_COMPAT -DECLARE_VDSO_IMAGE(vdso32_syscall); + unsigned long sym_vvar_page; + unsigned long sym_hpet_page; + unsigned long sym_VDSO32_NOTE_MASK; + unsigned long sym___kernel_sigreturn; + unsigned long sym___kernel_rt_sigreturn; + unsigned long sym___kernel_vsyscall; + unsigned long sym_VDSO32_SYSENTER_RETURN; +}; + +#ifdef CONFIG_X86_64 +extern const struct vdso_image vdso_image_64; +#endif + +#ifdef CONFIG_X86_X32 +extern const struct vdso_image vdso_image_x32; #endif -DECLARE_VDSO_IMAGE(vdso32_sysenter); -/* - * Given a pointer to the vDSO image, find the pointer to VDSO32_name - * as that symbol is defined in the vDSO sources or linker script. - */ -#define VDSO32_SYMBOL(base, name) \ -({ \ - extern const char VDSO32_##name[]; \ - (void __user *)(VDSO32_##name + (unsigned long)(base)); \ -}) +#if defined CONFIG_X86_32 || defined CONFIG_COMPAT +extern const struct vdso_image vdso_image_32_int80; +#ifdef CONFIG_COMPAT +extern const struct vdso_image vdso_image_32_syscall; #endif +extern const struct vdso_image vdso_image_32_sysenter; -/* - * These symbols are defined with the addresses in the vsyscall page. - * See vsyscall-sigreturn.S. - */ -extern void __user __kernel_sigreturn; -extern void __user __kernel_rt_sigreturn; +extern const struct vdso_image *selected_vdso32; +#endif -void __init patch_vdso32(void *vdso, size_t len); +extern void __init init_vdso_image(const struct vdso_image *image); #endif /* __ASSEMBLER__ */ diff --git a/arch/x86/include/asm/vdso32.h b/arch/x86/include/asm/vdso32.h deleted file mode 100644 index 7efb7018406e..000000000000 --- a/arch/x86/include/asm/vdso32.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_X86_VDSO32_H -#define _ASM_X86_VDSO32_H - -#define VDSO_BASE_PAGE 0 -#define VDSO_VVAR_PAGE 1 -#define VDSO_HPET_PAGE 2 -#define VDSO_PAGES 3 -#define VDSO_PREV_PAGES 2 -#define VDSO_OFFSET(x) ((x) * PAGE_SIZE) - -#endif diff --git a/arch/x86/include/asm/vvar.h b/arch/x86/include/asm/vvar.h index 081d909bc495..5d2b9ad2c6d2 100644 --- a/arch/x86/include/asm/vvar.h +++ b/arch/x86/include/asm/vvar.h @@ -29,31 +29,13 @@ #else -#ifdef BUILD_VDSO32 +extern char __vvar_page; #define DECLARE_VVAR(offset, type, name) \ extern type vvar_ ## name __attribute__((visibility("hidden"))); #define VVAR(name) (vvar_ ## name) -#else - -extern char __vvar_page; - -/* Base address of vvars. This is not ABI. */ -#ifdef CONFIG_X86_64 -#define VVAR_ADDRESS (-10*1024*1024 - 4096) -#else -#define VVAR_ADDRESS (&__vvar_page) -#endif - -#define DECLARE_VVAR(offset, type, name) \ - static type const * const vvaraddr_ ## name = \ - (void *)(VVAR_ADDRESS + (offset)); - -#define VVAR(name) (*vvaraddr_ ## name) -#endif - #define DEFINE_VVAR(type, name) \ type name \ __attribute__((section(".vvar_" #name), aligned(16))) __visible diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index e709884d0ef9..ca08a27b90b3 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -343,7 +343,7 @@ HYPERVISOR_memory_op(unsigned int cmd, void *arg) } static inline int -HYPERVISOR_multicall(void *call_list, int nr_calls) +HYPERVISOR_multicall(void *call_list, uint32_t nr_calls) { return _hypercall2(int, multicall, call_list, nr_calls); } diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h index fd9cb7695b5f..3400dbaec3c3 100644 --- a/arch/x86/include/asm/xen/interface.h +++ b/arch/x86/include/asm/xen/interface.h @@ -54,6 +54,9 @@ typedef unsigned long xen_pfn_t; #define PRI_xen_pfn "lx" typedef unsigned long xen_ulong_t; #define PRI_xen_ulong "lx" +typedef long xen_long_t; +#define PRI_xen_long "lx" + /* Guest handles for primitive C types. */ __DEFINE_GUEST_HANDLE(uchar, unsigned char); __DEFINE_GUEST_HANDLE(uint, unsigned int); diff --git a/arch/x86/include/uapi/asm/vsyscall.h b/arch/x86/include/uapi/asm/vsyscall.h index 85dc1b3825ab..b97dd6e263d2 100644 --- a/arch/x86/include/uapi/asm/vsyscall.h +++ b/arch/x86/include/uapi/asm/vsyscall.h @@ -7,11 +7,6 @@ enum vsyscall_num { __NR_vgetcpu, }; -#define VSYSCALL_START (-10UL << 20) -#define VSYSCALL_SIZE 1024 -#define VSYSCALL_END (-2UL << 20) -#define VSYSCALL_MAPPED_PAGES 1 -#define VSYSCALL_ADDR(vsyscall_nr) (VSYSCALL_START+VSYSCALL_SIZE*(vsyscall_nr)) - +#define VSYSCALL_ADDR (-10UL << 20) #endif /* _UAPI_ASM_X86_VSYSCALL_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f4d96000d33a..491ef3e59850 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o obj-y += syscall_$(BITS).o vsyscall_gtod.o obj-$(CONFIG_X86_64) += vsyscall_64.o obj-$(CONFIG_X86_64) += vsyscall_emu_64.o +obj-$(CONFIG_X86_ESPFIX64) += espfix_64.o obj-$(CONFIG_SYSFS) += ksysfs.o obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o topology.o kdebugfs.o diff --git a/arch/x86/kernel/amd_gart_64.c b/arch/x86/kernel/amd_gart_64.c index b574b295a2f9..8e3842fc8bea 100644 --- a/arch/x86/kernel/amd_gart_64.c +++ b/arch/x86/kernel/amd_gart_64.c @@ -512,7 +512,7 @@ gart_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_addr, struct dma_attrs *attrs) { gart_unmap_page(dev, dma_addr, size, DMA_BIDIRECTIONAL, NULL); - free_pages((unsigned long)vaddr, get_order(size)); + dma_generic_free_coherent(dev, size, vaddr, dma_addr, attrs); } static int gart_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index 9fa8aa051f54..76164e173a24 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -10,6 +10,8 @@ * * Copyright 2002 Andi Kleen, SuSE Labs. */ +#define pr_fmt(fmt) "AGP: " fmt + #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> @@ -75,14 +77,13 @@ static u32 __init allocate_aperture(void) addr = memblock_find_in_range(GART_MIN_ADDR, GART_MAX_ADDR, aper_size, aper_size); if (!addr) { - printk(KERN_ERR - "Cannot allocate aperture memory hole (%lx,%uK)\n", - addr, aper_size>>10); + pr_err("Cannot allocate aperture memory hole [mem %#010lx-%#010lx] (%uKB)\n", + addr, addr + aper_size - 1, aper_size >> 10); return 0; } memblock_reserve(addr, aper_size); - printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n", - aper_size >> 10, addr); + pr_info("Mapping aperture over RAM [mem %#010lx-%#010lx] (%uKB)\n", + addr, addr + aper_size - 1, aper_size >> 10); register_nosave_region(addr >> PAGE_SHIFT, (addr+aper_size) >> PAGE_SHIFT); @@ -126,10 +127,11 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) u64 aper; u32 old_order; - printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func); + pr_info("pci 0000:%02x:%02x:%02x: AGP bridge\n", bus, slot, func); apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14); if (apsizereg == 0xffffffff) { - printk(KERN_ERR "APSIZE in AGP bridge unreadable\n"); + pr_err("pci 0000:%02x:%02x.%d: APSIZE unreadable\n", + bus, slot, func); return 0; } @@ -153,16 +155,18 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order) * On some sick chips, APSIZE is 0. It means it wants 4G * so let double check that order, and lets trust AMD NB settings: */ - printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n", - aper, 32 << old_order); + pr_info("pci 0000:%02x:%02x.%d: AGP aperture [bus addr %#010Lx-%#010Lx] (old size %uMB)\n", + bus, slot, func, aper, aper + (32ULL << (old_order + 20)) - 1, + 32 << old_order); if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) { - printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n", - 32 << *order, apsizereg); + pr_info("pci 0000:%02x:%02x.%d: AGP aperture size %uMB (APSIZE %#x) is not right, using settings from NB\n", + bus, slot, func, 32 << *order, apsizereg); *order = old_order; } - printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n", - aper, 32 << *order, apsizereg); + pr_info("pci 0000:%02x:%02x.%d: AGP aperture [bus addr %#010Lx-%#010Lx] (%uMB, APSIZE %#x)\n", + bus, slot, func, aper, aper + (32ULL << (*order + 20)) - 1, + 32 << *order, apsizereg); if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20)) return 0; @@ -218,7 +222,7 @@ static u32 __init search_agp_bridge(u32 *order, int *valid_agp) } } } - printk(KERN_INFO "No AGP bridge found\n"); + pr_info("No AGP bridge found\n"); return 0; } @@ -310,7 +314,8 @@ void __init early_gart_iommu_check(void) if (e820_any_mapped(aper_base, aper_base + aper_size, E820_RAM)) { /* reserve it, so we can reuse it in second kernel */ - printk(KERN_INFO "update e820 for GART\n"); + pr_info("e820: reserve [mem %#010Lx-%#010Lx] for GART\n", + aper_base, aper_base + aper_size - 1); e820_add_region(aper_base, aper_size, E820_RESERVED); update_e820(); } @@ -354,7 +359,7 @@ int __init gart_iommu_hole_init(void) !early_pci_allowed()) return -ENODEV; - printk(KERN_INFO "Checking aperture...\n"); + pr_info("Checking aperture...\n"); if (!fallback_aper_force) agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); @@ -395,8 +400,9 @@ int __init gart_iommu_hole_init(void) aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff; aper_base <<= 25; - printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n", - node, aper_base, aper_size >> 20); + pr_info("Node %d: aperture [bus addr %#010Lx-%#010Lx] (%uMB)\n", + node, aper_base, aper_base + aper_size - 1, + aper_size >> 20); node++; if (!aperture_valid(aper_base, aper_size, 64<<20)) { @@ -407,9 +413,9 @@ int __init gart_iommu_hole_init(void) if (!no_iommu && max_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) { - printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n"); - printk(KERN_ERR "please increase GART size in your BIOS setup\n"); - printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n"); + pr_err("you are using iommu with agp, but GART size is less than 64MB\n"); + pr_err("please increase GART size in your BIOS setup\n"); + pr_err("if BIOS doesn't have that option, contact your HW vendor!\n"); printed_gart_size_msg = 1; } } else { @@ -446,13 +452,10 @@ out: force_iommu || valid_agp || fallback_aper_force) { - printk(KERN_INFO - "Your BIOS doesn't leave a aperture memory hole\n"); - printk(KERN_INFO - "Please enable the IOMMU option in the BIOS setup\n"); - printk(KERN_INFO - "This costs you %d MB of RAM\n", - 32 << fallback_aper_order); + pr_info("Your BIOS doesn't leave a aperture memory hole\n"); + pr_info("Please enable the IOMMU option in the BIOS setup\n"); + pr_info("This costs you %dMB of RAM\n", + 32 << fallback_aper_order); aper_order = fallback_aper_order; aper_alloc = allocate_aperture(); diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c index a698d7165c96..eab67047dec3 100644 --- a/arch/x86/kernel/apic/hw_nmi.c +++ b/arch/x86/kernel/apic/hw_nmi.c @@ -57,7 +57,7 @@ void arch_trigger_all_cpu_backtrace(void) } clear_bit(0, &backtrace_flag); - smp_mb__after_clear_bit(); + smp_mb__after_atomic(); } static int __kprobes diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 992060e09897..9d0a9795a0f8 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -206,9 +206,6 @@ int __init arch_early_irq_init(void) count = ARRAY_SIZE(irq_cfgx); node = cpu_to_node(0); - /* Make sure the legacy interrupts are marked in the bitmap */ - irq_reserve_irqs(0, legacy_pic->nr_legacy_irqs); - for (i = 0; i < count; i++) { irq_set_chip_data(i, &cfg[i]); zalloc_cpumask_var_node(&cfg[i].domain, GFP_KERNEL, node); @@ -281,18 +278,6 @@ static struct irq_cfg *alloc_irq_and_cfg_at(unsigned int at, int node) return cfg; } -static int alloc_irqs_from(unsigned int from, unsigned int count, int node) -{ - return irq_alloc_descs_from(from, count, node); -} - -static void free_irq_at(unsigned int at, struct irq_cfg *cfg) -{ - free_irq_cfg(at, cfg); - irq_free_desc(at); -} - - struct io_apic { unsigned int index; unsigned int unused[3]; @@ -2916,98 +2901,39 @@ static int __init ioapic_init_ops(void) device_initcall(ioapic_init_ops); /* - * Dynamic irq allocate and deallocation + * Dynamic irq allocate and deallocation. Should be replaced by irq domains! */ -unsigned int __create_irqs(unsigned int from, unsigned int count, int node) +int arch_setup_hwirq(unsigned int irq, int node) { - struct irq_cfg **cfg; + struct irq_cfg *cfg; unsigned long flags; - int irq, i; - - if (from < nr_irqs_gsi) - from = nr_irqs_gsi; + int ret; - cfg = kzalloc_node(count * sizeof(cfg[0]), GFP_KERNEL, node); + cfg = alloc_irq_cfg(irq, node); if (!cfg) - return 0; - - irq = alloc_irqs_from(from, count, node); - if (irq < 0) - goto out_cfgs; - - for (i = 0; i < count; i++) { - cfg[i] = alloc_irq_cfg(irq + i, node); - if (!cfg[i]) - goto out_irqs; - } + return -ENOMEM; raw_spin_lock_irqsave(&vector_lock, flags); - for (i = 0; i < count; i++) - if (__assign_irq_vector(irq + i, cfg[i], apic->target_cpus())) - goto out_vecs; - raw_spin_unlock_irqrestore(&vector_lock, flags); - - for (i = 0; i < count; i++) { - irq_set_chip_data(irq + i, cfg[i]); - irq_clear_status_flags(irq + i, IRQ_NOREQUEST); - } - - kfree(cfg); - return irq; - -out_vecs: - for (i--; i >= 0; i--) - __clear_irq_vector(irq + i, cfg[i]); + ret = __assign_irq_vector(irq, cfg, apic->target_cpus()); raw_spin_unlock_irqrestore(&vector_lock, flags); -out_irqs: - for (i = 0; i < count; i++) - free_irq_at(irq + i, cfg[i]); -out_cfgs: - kfree(cfg); - return 0; -} -unsigned int create_irq_nr(unsigned int from, int node) -{ - return __create_irqs(from, 1, node); -} - -int create_irq(void) -{ - int node = cpu_to_node(0); - unsigned int irq_want; - int irq; - - irq_want = nr_irqs_gsi; - irq = create_irq_nr(irq_want, node); - - if (irq == 0) - irq = -1; - - return irq; + if (!ret) + irq_set_chip_data(irq, cfg); + else + free_irq_cfg(irq, cfg); + return ret; } -void destroy_irq(unsigned int irq) +void arch_teardown_hwirq(unsigned int irq) { struct irq_cfg *cfg = irq_get_chip_data(irq); unsigned long flags; - irq_set_status_flags(irq, IRQ_NOREQUEST|IRQ_NOPROBE); - free_remapped_irq(irq); - raw_spin_lock_irqsave(&vector_lock, flags); __clear_irq_vector(irq, cfg); raw_spin_unlock_irqrestore(&vector_lock, flags); - free_irq_at(irq, cfg); -} - -void destroy_irqs(unsigned int irq, unsigned int count) -{ - unsigned int i; - - for (i = 0; i < count; i++) - destroy_irq(irq + i); + free_irq_cfg(irq, cfg); } /* @@ -3136,8 +3062,8 @@ int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { - unsigned int irq, irq_want; struct msi_desc *msidesc; + unsigned int irq; int node, ret; /* Multiple MSI vectors only supported with interrupt remapping */ @@ -3145,28 +3071,25 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return 1; node = dev_to_node(&dev->dev); - irq_want = nr_irqs_gsi; + list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = create_irq_nr(irq_want, node); - if (irq == 0) + irq = irq_alloc_hwirq(node); + if (!irq) return -ENOSPC; - irq_want = irq + 1; - ret = setup_msi_irq(dev, msidesc, irq, 0); - if (ret < 0) - goto error; + if (ret < 0) { + irq_free_hwirq(irq); + return ret; + } + } return 0; - -error: - destroy_irq(irq); - return ret; } void native_teardown_msi_irq(unsigned int irq) { - destroy_irq(irq); + irq_free_hwirq(irq); } #ifdef CONFIG_DMAR_TABLE @@ -3420,11 +3343,6 @@ static void __init probe_nr_irqs_gsi(void) printk(KERN_DEBUG "nr_irqs_gsi: %d\n", nr_irqs_gsi); } -int get_nr_irqs_gsi(void) -{ - return nr_irqs_gsi; -} - unsigned int arch_dynirq_lower_bound(unsigned int from) { return from < nr_irqs_gsi ? nr_irqs_gsi : from; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index 7834389ba5be..293b41df54ef 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -5,7 +5,7 @@ * * SGI UV APIC functions (note: not an Intel compatible APIC) * - * Copyright (C) 2007-2013 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2007-2014 Silicon Graphics, Inc. All rights reserved. */ #include <linux/cpumask.h> #include <linux/hardirq.h> @@ -440,6 +440,20 @@ static __initdata struct redir_addr redir_addrs[] = { {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR}, }; +static unsigned char get_n_lshift(int m_val) +{ + union uv3h_gr0_gam_gr_config_u m_gr_config; + + if (is_uv1_hub()) + return m_val; + + if (is_uv2_hub()) + return m_val == 40 ? 40 : 39; + + m_gr_config.v = uv_read_local_mmr(UV3H_GR0_GAM_GR_CONFIG); + return m_gr_config.s3.m_skt; +} + static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) { union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias; @@ -849,6 +863,7 @@ void __init uv_system_init(void) int gnode_extra, min_pnode = 999999, max_pnode = -1; unsigned long mmr_base, present, paddr; unsigned short pnode_mask; + unsigned char n_lshift; char *hub = (is_uv1_hub() ? "UV1" : (is_uv2_hub() ? "UV2" : "UV3")); @@ -860,6 +875,7 @@ void __init uv_system_init(void) m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; pnode_mask = (1 << n_val) - 1; + n_lshift = get_n_lshift(m_val); mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; @@ -867,8 +883,9 @@ void __init uv_system_init(void) node_id.v = uv_read_local_mmr(UVH_NODE_ID); gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1; gnode_upper = ((unsigned long)gnode_extra << m_val); - pr_info("UV: N:%d M:%d pnode_mask:0x%x gnode_upper/extra:0x%lx/0x%x\n", - n_val, m_val, pnode_mask, gnode_upper, gnode_extra); + pr_info("UV: N:%d M:%d pnode_mask:0x%x gnode_upper/extra:0x%lx/0x%x n_lshift 0x%x\n", + n_val, m_val, pnode_mask, gnode_upper, gnode_extra, + n_lshift); pr_info("UV: global MMR base 0x%lx\n", mmr_base); @@ -935,8 +952,7 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision; uv_cpu_hub_info(cpu)->m_shift = 64 - m_val; - uv_cpu_hub_info(cpu)->n_lshift = is_uv2_1_hub() ? - (m_val == 40 ? 40 : 39) : m_val; + uv_cpu_hub_info(cpu)->n_lshift = n_lshift; pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 3ab03430211d..f3a1f04ed4cb 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -844,21 +844,10 @@ static int apm_do_idle(void) int polling; int err = 0; - polling = !!(current_thread_info()->status & TS_POLLING); - if (polling) { - current_thread_info()->status &= ~TS_POLLING; - /* - * TS_POLLING-cleared state must be visible before we - * test NEED_RESCHED: - */ - smp_mb(); - } if (!need_resched()) { idled = 1; ret = apm_bios_call_simple(APM_FUNC_IDLE, 0, 0, &eax, &err); } - if (polling) - current_thread_info()->status |= TS_POLLING; if (!idled) return 0; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index a135239badb7..2cbbf88d8f2c 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -20,6 +20,7 @@ #include <asm/processor.h> #include <asm/debugreg.h> #include <asm/sections.h> +#include <asm/vsyscall.h> #include <linux/topology.h> #include <linux/cpumask.h> #include <asm/pgtable.h> @@ -953,6 +954,38 @@ static void vgetcpu_set_mode(void) else vgetcpu_mode = VGETCPU_LSL; } + +/* May not be __init: called during resume */ +static void syscall32_cpu_init(void) +{ + /* Load these always in case some future AMD CPU supports + SYSENTER from compat mode too. */ + wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS); + wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL); + wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target); + + wrmsrl(MSR_CSTAR, ia32_cstar_target); +} +#endif + +#ifdef CONFIG_X86_32 +void enable_sep_cpu(void) +{ + int cpu = get_cpu(); + struct tss_struct *tss = &per_cpu(init_tss, cpu); + + if (!boot_cpu_has(X86_FEATURE_SEP)) { + put_cpu(); + return; + } + + tss->x86_tss.ss1 = __KERNEL_CS; + tss->x86_tss.sp1 = sizeof(struct tss_struct) + (unsigned long) tss; + wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); + wrmsr(MSR_IA32_SYSENTER_ESP, tss->x86_tss.sp1, 0); + wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long) ia32_sysenter_target, 0); + put_cpu(); +} #endif void __init identify_boot_cpu(void) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 68317c80de7f..bb92f38153b2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -60,8 +60,6 @@ static DEFINE_MUTEX(mce_chrdev_read_mutex); #define SPINUNIT 100 /* 100ns */ -atomic_t mce_entry; - DEFINE_PER_CPU(unsigned, mce_exception_count); struct mce_bank *mce_banks __read_mostly; @@ -704,8 +702,7 @@ static int mce_timed_out(u64 *t) if (!mca_cfg.monarch_timeout) goto out; if ((s64)*t < SPINUNIT) { - /* CHECKME: Make panic default for 1 too? */ - if (mca_cfg.tolerant < 1) + if (mca_cfg.tolerant <= 1) mce_panic("Timeout synchronizing machine check over CPUs", NULL, NULL); cpu_missing = 1; @@ -1041,8 +1038,6 @@ void do_machine_check(struct pt_regs *regs, long error_code) DECLARE_BITMAP(valid_banks, MAX_NR_BANKS); char *msg = "Unknown"; - atomic_inc(&mce_entry); - this_cpu_inc(mce_exception_count); if (!cfg->banks) @@ -1172,7 +1167,6 @@ void do_machine_check(struct pt_regs *regs, long error_code) mce_report_event(regs); mce_wrmsrl(MSR_IA32_MCG_STATUS, 0); out: - atomic_dec(&mce_entry); sync_core(); } EXPORT_SYMBOL_GPL(do_machine_check); @@ -2437,32 +2431,65 @@ static __init int mcheck_init_device(void) int err; int i = 0; - if (!mce_available(&boot_cpu_data)) - return -EIO; + if (!mce_available(&boot_cpu_data)) { + err = -EIO; + goto err_out; + } - zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL); + if (!zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL)) { + err = -ENOMEM; + goto err_out; + } mce_init_banks(); err = subsys_system_register(&mce_subsys, NULL); if (err) - return err; + goto err_out_mem; cpu_notifier_register_begin(); for_each_online_cpu(i) { err = mce_device_create(i); if (err) { cpu_notifier_register_done(); - return err; + goto err_device_create; } } - register_syscore_ops(&mce_syscore_ops); __register_hotcpu_notifier(&mce_cpu_notifier); cpu_notifier_register_done(); + register_syscore_ops(&mce_syscore_ops); + /* register character device /dev/mcelog */ - misc_register(&mce_chrdev_device); + err = misc_register(&mce_chrdev_device); + if (err) + goto err_register; + + return 0; + +err_register: + unregister_syscore_ops(&mce_syscore_ops); + + cpu_notifier_register_begin(); + __unregister_hotcpu_notifier(&mce_cpu_notifier); + cpu_notifier_register_done(); + +err_device_create: + /* + * We didn't keep track of which devices were created above, but + * even if we had, the set of online cpus might have changed. + * Play safe and remove for every possible cpu, since + * mce_device_remove() will do the right thing. + */ + for_each_possible_cpu(i) + mce_device_remove(i); + +err_out_mem: + free_cpumask_var(mce_device_initialized); + +err_out: + pr_err("Unable to init device /dev/mcelog (rc: %d)\n", err); return err; } diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index 15c987698b0f..dd9d6190b08d 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -97,6 +97,9 @@ MODULE_LICENSE("GPL"); static struct microcode_ops *microcode_ops; +bool dis_ucode_ldr; +module_param(dis_ucode_ldr, bool, 0); + /* * Synchronization. * @@ -546,6 +549,9 @@ static int __init microcode_init(void) struct cpuinfo_x86 *c = &cpu_data(0); int error; + if (dis_ucode_ldr) + return 0; + if (c->x86_vendor == X86_VENDOR_INTEL) microcode_ops = init_intel_microcode(); else if (c->x86_vendor == X86_VENDOR_AMD) diff --git a/arch/x86/kernel/cpu/microcode/core_early.c b/arch/x86/kernel/cpu/microcode/core_early.c index be7f8514f577..5f28a64e71ea 100644 --- a/arch/x86/kernel/cpu/microcode/core_early.c +++ b/arch/x86/kernel/cpu/microcode/core_early.c @@ -17,9 +17,11 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/module.h> +#include <asm/microcode.h> #include <asm/microcode_intel.h> #include <asm/microcode_amd.h> #include <asm/processor.h> +#include <asm/cmdline.h> #define QCHAR(a, b, c, d) ((a) + ((b) << 8) + ((c) << 16) + ((d) << 24)) #define CPUID_INTEL1 QCHAR('G', 'e', 'n', 'u') @@ -72,10 +74,33 @@ static int x86_family(void) return x86; } +static bool __init check_loader_disabled_bsp(void) +{ +#ifdef CONFIG_X86_32 + const char *cmdline = (const char *)__pa_nodebug(boot_command_line); + const char *opt = "dis_ucode_ldr"; + const char *option = (const char *)__pa_nodebug(opt); + bool *res = (bool *)__pa_nodebug(&dis_ucode_ldr); + +#else /* CONFIG_X86_64 */ + const char *cmdline = boot_command_line; + const char *option = "dis_ucode_ldr"; + bool *res = &dis_ucode_ldr; +#endif + + if (cmdline_find_option_bool(cmdline, option)) + *res = true; + + return *res; +} + void __init load_ucode_bsp(void) { int vendor, x86; + if (check_loader_disabled_bsp()) + return; + if (!have_cpuid_p()) return; @@ -96,10 +121,22 @@ void __init load_ucode_bsp(void) } } +static bool check_loader_disabled_ap(void) +{ +#ifdef CONFIG_X86_32 + return __pa_nodebug(dis_ucode_ldr); +#else + return dis_ucode_ldr; +#endif +} + void load_ucode_ap(void) { int vendor, x86; + if (check_loader_disabled_ap()) + return; + if (!have_cpuid_p()) return; diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ae407f7226c8..89f3b7c1af20 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -721,6 +721,7 @@ int perf_assign_events(struct perf_event **events, int n, return sched.state.unassigned; } +EXPORT_SYMBOL_GPL(perf_assign_events); int x86_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign) { diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index aa333d966886..adb02aa62af5 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -169,7 +169,6 @@ static struct event_constraint intel_slm_event_constraints[] __read_mostly = { FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */ FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */ - FIXED_EVENT_CONSTRAINT(0x013c, 2), /* CPU_CLK_UNHALTED.REF */ FIXED_EVENT_CONSTRAINT(0x0300, 2), /* pseudo CPU_CLK_UNHALTED.REF */ EVENT_CONSTRAINT_END }; diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index ae96cfa5eddd..980970cb744d 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -108,15 +108,31 @@ static u64 precise_store_data(u64 status) return val; } -static u64 precise_store_data_hsw(u64 status) +static u64 precise_store_data_hsw(struct perf_event *event, u64 status) { union perf_mem_data_src dse; + u64 cfg = event->hw.config & INTEL_ARCH_EVENT_MASK; dse.val = 0; dse.mem_op = PERF_MEM_OP_STORE; dse.mem_lvl = PERF_MEM_LVL_NA; + + /* + * L1 info only valid for following events: + * + * MEM_UOPS_RETIRED.STLB_MISS_STORES + * MEM_UOPS_RETIRED.LOCK_STORES + * MEM_UOPS_RETIRED.SPLIT_STORES + * MEM_UOPS_RETIRED.ALL_STORES + */ + if (cfg != 0x12d0 && cfg != 0x22d0 && cfg != 0x42d0 && cfg != 0x82d0) + return dse.mem_lvl; + if (status & 1) - dse.mem_lvl = PERF_MEM_LVL_L1; + dse.mem_lvl = PERF_MEM_LVL_L1 | PERF_MEM_LVL_HIT; + else + dse.mem_lvl = PERF_MEM_LVL_L1 | PERF_MEM_LVL_MISS; + /* Nothing else supported. Sorry. */ return dse.val; } @@ -887,7 +903,7 @@ static void __intel_pmu_pebs_event(struct perf_event *event, data.data_src.val = load_latency_data(pebs->dse); else if (event->hw.flags & PERF_X86_EVENT_PEBS_ST_HSW) data.data_src.val = - precise_store_data_hsw(pebs->dse); + precise_store_data_hsw(event, pebs->dse); else data.data_src.val = precise_store_data(pebs->dse); } diff --git a/arch/x86/kernel/devicetree.c b/arch/x86/kernel/devicetree.c index d35078ea1446..7db54b5d5f86 100644 --- a/arch/x86/kernel/devicetree.c +++ b/arch/x86/kernel/devicetree.c @@ -206,23 +206,21 @@ static void __init dtb_apic_setup(void) static void __init x86_flattree_get_config(void) { u32 size, map_len; - struct boot_param_header *dt; + void *dt; if (!initial_dtb) return; - map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), - (u64)sizeof(struct boot_param_header)); + map_len = max(PAGE_SIZE - (initial_dtb & ~PAGE_MASK), (u64)128); - dt = early_memremap(initial_dtb, map_len); - size = be32_to_cpu(dt->totalsize); + initial_boot_params = dt = early_memremap(initial_dtb, map_len); + size = of_get_flat_dt_size(); if (map_len < size) { early_iounmap(dt, map_len); - dt = early_memremap(initial_dtb, size); + initial_boot_params = dt = early_memremap(initial_dtb, size); map_len = size; } - initial_boot_params = dt; unflatten_and_copy_device_tree(); early_iounmap(dt, map_len); } diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index a2a4f4697889..98313ffaae6a 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -527,6 +527,7 @@ syscall_exit: restore_all: TRACE_IRQS_IRET restore_all_notrace: +#ifdef CONFIG_X86_ESPFIX32 movl PT_EFLAGS(%esp), %eax # mix EFLAGS, SS and CS # Warning: PT_OLDSS(%esp) contains the wrong/random values if we # are returning to the kernel. @@ -537,6 +538,7 @@ restore_all_notrace: cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax CFI_REMEMBER_STATE je ldt_ss # returning to user-space with LDT SS +#endif restore_nocheck: RESTORE_REGS 4 # skip orig_eax/error_code irq_return: @@ -549,13 +551,9 @@ ENTRY(iret_exc) .previous _ASM_EXTABLE(irq_return,iret_exc) +#ifdef CONFIG_X86_ESPFIX32 CFI_RESTORE_STATE ldt_ss: - larl PT_OLDSS(%esp), %eax - jnz restore_nocheck - testl $0x00400000, %eax # returning to 32bit stack? - jnz restore_nocheck # allright, normal return - #ifdef CONFIG_PARAVIRT /* * The kernel can't run on a non-flat stack if paravirt mode @@ -597,6 +595,7 @@ ldt_ss: lss (%esp), %esp /* switch to espfix segment */ CFI_ADJUST_CFA_OFFSET -8 jmp restore_nocheck +#endif CFI_ENDPROC ENDPROC(system_call) @@ -704,6 +703,7 @@ END(syscall_badsys) * the high word of the segment base from the GDT and swiches to the * normal stack and adjusts ESP with the matching offset. */ +#ifdef CONFIG_X86_ESPFIX32 /* fixup the stack */ mov GDT_ESPFIX_SS + 4, %al /* bits 16..23 */ mov GDT_ESPFIX_SS + 7, %ah /* bits 24..31 */ @@ -713,8 +713,10 @@ END(syscall_badsys) pushl_cfi %eax lss (%esp), %esp /* switch to the normal stack segment */ CFI_ADJUST_CFA_OFFSET -8 +#endif .endm .macro UNWIND_ESPFIX_STACK +#ifdef CONFIG_X86_ESPFIX32 movl %ss, %eax /* see if on espfix stack */ cmpw $__ESPFIX_SS, %ax @@ -725,6 +727,7 @@ END(syscall_badsys) /* switch to normal stack */ FIXUP_ESPFIX_STACK 27: +#endif .endm /* @@ -1355,11 +1358,13 @@ END(debug) ENTRY(nmi) RING0_INT_FRAME ASM_CLAC +#ifdef CONFIG_X86_ESPFIX32 pushl_cfi %eax movl %ss, %eax cmpw $__ESPFIX_SS, %ax popl_cfi %eax je nmi_espfix_stack +#endif cmpl $ia32_sysenter_target,(%esp) je nmi_stack_fixup pushl_cfi %eax @@ -1399,6 +1404,7 @@ nmi_debug_stack_check: FIX_STACK 24, nmi_stack_correct, 1 jmp nmi_stack_correct +#ifdef CONFIG_X86_ESPFIX32 nmi_espfix_stack: /* We have a RING0_INT_FRAME here. * @@ -1420,6 +1426,7 @@ nmi_espfix_stack: lss 12+4(%esp), %esp # back to espfix stack CFI_ADJUST_CFA_OFFSET -24 jmp irq_return +#endif CFI_ENDPROC END(nmi) diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 1e96c3628bf2..96987987c5de 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -36,7 +36,7 @@ * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack * frame that is otherwise undefined after a SYSCALL * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging. - * - errorentry/paranoidentry/zeroentry - Define exception entry points. + * - idtentry - Define exception entry points. */ #include <linux/linkage.h> @@ -58,6 +58,7 @@ #include <asm/asm.h> #include <asm/context_tracking.h> #include <asm/smap.h> +#include <asm/pgtable_types.h> #include <linux/err.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ @@ -1040,8 +1041,18 @@ restore_args: RESTORE_ARGS 1,8,1 irq_return: + /* + * Are we returning to a stack segment from the LDT? Note: in + * 64-bit mode SS:RSP on the exception stack is always valid. + */ +#ifdef CONFIG_X86_ESPFIX64 + testb $4,(SS-RIP)(%rsp) + jnz irq_return_ldt +#endif + +irq_return_iret: INTERRUPT_RETURN - _ASM_EXTABLE(irq_return, bad_iret) + _ASM_EXTABLE(irq_return_iret, bad_iret) #ifdef CONFIG_PARAVIRT ENTRY(native_iret) @@ -1049,6 +1060,32 @@ ENTRY(native_iret) _ASM_EXTABLE(native_iret, bad_iret) #endif +#ifdef CONFIG_X86_ESPFIX64 +irq_return_ldt: + pushq_cfi %rax + pushq_cfi %rdi + SWAPGS + movq PER_CPU_VAR(espfix_waddr),%rdi + movq %rax,(0*8)(%rdi) /* RAX */ + movq (2*8)(%rsp),%rax /* RIP */ + movq %rax,(1*8)(%rdi) + movq (3*8)(%rsp),%rax /* CS */ + movq %rax,(2*8)(%rdi) + movq (4*8)(%rsp),%rax /* RFLAGS */ + movq %rax,(3*8)(%rdi) + movq (6*8)(%rsp),%rax /* SS */ + movq %rax,(5*8)(%rdi) + movq (5*8)(%rsp),%rax /* RSP */ + movq %rax,(4*8)(%rdi) + andl $0xffff0000,%eax + popq_cfi %rdi + orq PER_CPU_VAR(espfix_stack),%rax + SWAPGS + movq %rax,%rsp + popq_cfi %rax + jmp irq_return_iret +#endif + .section .fixup,"ax" bad_iret: /* @@ -1110,9 +1147,45 @@ ENTRY(retint_kernel) call preempt_schedule_irq jmp exit_intr #endif - CFI_ENDPROC END(common_interrupt) + + /* + * If IRET takes a fault on the espfix stack, then we + * end up promoting it to a doublefault. In that case, + * modify the stack to make it look like we just entered + * the #GP handler from user space, similar to bad_iret. + */ +#ifdef CONFIG_X86_ESPFIX64 + ALIGN +__do_double_fault: + XCPT_FRAME 1 RDI+8 + movq RSP(%rdi),%rax /* Trap on the espfix stack? */ + sarq $PGDIR_SHIFT,%rax + cmpl $ESPFIX_PGD_ENTRY,%eax + jne do_double_fault /* No, just deliver the fault */ + cmpl $__KERNEL_CS,CS(%rdi) + jne do_double_fault + movq RIP(%rdi),%rax + cmpq $irq_return_iret,%rax +#ifdef CONFIG_PARAVIRT + je 1f + cmpq $native_iret,%rax +#endif + jne do_double_fault /* This shouldn't happen... */ +1: + movq PER_CPU_VAR(kernel_stack),%rax + subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */ + movq %rax,RSP(%rdi) + movq $0,(%rax) /* Missing (lost) #GP error code */ + movq $general_protection,RIP(%rdi) + retq + CFI_ENDPROC +END(__do_double_fault) +#else +# define __do_double_fault do_double_fault +#endif + /* * End of kprobes section */ @@ -1203,125 +1276,100 @@ apicinterrupt IRQ_WORK_VECTOR \ /* * Exception entry points. */ -.macro zeroentry sym do_sym -ENTRY(\sym) - INTR_FRAME - ASM_CLAC - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 - call error_entry - DEFAULT_FRAME 0 - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - call \do_sym - jmp error_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm +#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8) -.macro paranoidzeroentry sym do_sym +.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) - INTR_FRAME - ASM_CLAC - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 - call save_paranoid - TRACE_IRQS_OFF - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - call \do_sym - jmp paranoid_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm + /* Sanity check */ + .if \shift_ist != -1 && \paranoid == 0 + .error "using shift_ist requires paranoid=1" + .endif -#define INIT_TSS_IST(x) PER_CPU_VAR(init_tss) + (TSS_ist + ((x) - 1) * 8) -.macro paranoidzeroentry_ist sym do_sym ist -ENTRY(\sym) + .if \has_error_code + XCPT_FRAME + .else INTR_FRAME - ASM_CLAC - PARAVIRT_ADJUST_EXCEPTION_FRAME - pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 - call save_paranoid - TRACE_IRQS_OFF_DEBUG - movq %rsp,%rdi /* pt_regs pointer */ - xorl %esi,%esi /* no error code */ - subq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist) - call \do_sym - addq $EXCEPTION_STKSZ, INIT_TSS_IST(\ist) - jmp paranoid_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm + .endif -.macro errorentry sym do_sym -ENTRY(\sym) - XCPT_FRAME ASM_CLAC PARAVIRT_ADJUST_EXCEPTION_FRAME + + .ifeq \has_error_code + pushq_cfi $-1 /* ORIG_RAX: no syscall to restart */ + .endif + subq $ORIG_RAX-R15, %rsp CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 + + .if \paranoid + call save_paranoid + .else call error_entry + .endif + DEFAULT_FRAME 0 + + .if \paranoid + .if \shift_ist != -1 + TRACE_IRQS_OFF_DEBUG /* reload IDT in case of recursion */ + .else + TRACE_IRQS_OFF + .endif + .endif + movq %rsp,%rdi /* pt_regs pointer */ + + .if \has_error_code movq ORIG_RAX(%rsp),%rsi /* get error code */ movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ + .else + xorl %esi,%esi /* no error code */ + .endif + + .if \shift_ist != -1 + subq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist) + .endif + call \do_sym + + .if \shift_ist != -1 + addq $EXCEPTION_STKSZ, INIT_TSS_IST(\shift_ist) + .endif + + .if \paranoid + jmp paranoid_exit /* %ebx: no swapgs flag */ + .else jmp error_exit /* %ebx: no swapgs flag */ + .endif + CFI_ENDPROC END(\sym) .endm #ifdef CONFIG_TRACING -.macro trace_errorentry sym do_sym -errorentry trace(\sym) trace(\do_sym) -errorentry \sym \do_sym +.macro trace_idtentry sym do_sym has_error_code:req +idtentry trace(\sym) trace(\do_sym) has_error_code=\has_error_code +idtentry \sym \do_sym has_error_code=\has_error_code .endm #else -.macro trace_errorentry sym do_sym -errorentry \sym \do_sym +.macro trace_idtentry sym do_sym has_error_code:req +idtentry \sym \do_sym has_error_code=\has_error_code .endm #endif - /* error code is on the stack already */ -.macro paranoiderrorentry sym do_sym -ENTRY(\sym) - XCPT_FRAME - ASM_CLAC - PARAVIRT_ADJUST_EXCEPTION_FRAME - subq $ORIG_RAX-R15, %rsp - CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15 - call save_paranoid - DEFAULT_FRAME 0 - TRACE_IRQS_OFF - movq %rsp,%rdi /* pt_regs pointer */ - movq ORIG_RAX(%rsp),%rsi /* get error code */ - movq $-1,ORIG_RAX(%rsp) /* no syscall to restart */ - call \do_sym - jmp paranoid_exit /* %ebx: no swapgs flag */ - CFI_ENDPROC -END(\sym) -.endm - -zeroentry divide_error do_divide_error -zeroentry overflow do_overflow -zeroentry bounds do_bounds -zeroentry invalid_op do_invalid_op -zeroentry device_not_available do_device_not_available -paranoiderrorentry double_fault do_double_fault -zeroentry coprocessor_segment_overrun do_coprocessor_segment_overrun -errorentry invalid_TSS do_invalid_TSS -errorentry segment_not_present do_segment_not_present -zeroentry spurious_interrupt_bug do_spurious_interrupt_bug -zeroentry coprocessor_error do_coprocessor_error -errorentry alignment_check do_alignment_check -zeroentry simd_coprocessor_error do_simd_coprocessor_error +idtentry divide_error do_divide_error has_error_code=0 +idtentry overflow do_overflow has_error_code=0 +idtentry bounds do_bounds has_error_code=0 +idtentry invalid_op do_invalid_op has_error_code=0 +idtentry device_not_available do_device_not_available has_error_code=0 +idtentry double_fault __do_double_fault has_error_code=1 paranoid=1 +idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0 +idtentry invalid_TSS do_invalid_TSS has_error_code=1 +idtentry segment_not_present do_segment_not_present has_error_code=1 +idtentry spurious_interrupt_bug do_spurious_interrupt_bug has_error_code=0 +idtentry coprocessor_error do_coprocessor_error has_error_code=0 +idtentry alignment_check do_alignment_check has_error_code=1 +idtentry simd_coprocessor_error do_simd_coprocessor_error has_error_code=0 /* Reload gs selector with exception handling */ @@ -1371,7 +1419,7 @@ ENTRY(do_softirq_own_stack) END(do_softirq_own_stack) #ifdef CONFIG_XEN -zeroentry xen_hypervisor_callback xen_do_hypervisor_callback +idtentry xen_hypervisor_callback xen_do_hypervisor_callback has_error_code=0 /* * A note on the "critical region" in our callback handler. @@ -1482,21 +1530,21 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \ */ .pushsection .kprobes.text, "ax" -paranoidzeroentry_ist debug do_debug DEBUG_STACK -paranoidzeroentry_ist int3 do_int3 DEBUG_STACK -paranoiderrorentry stack_segment do_stack_segment +idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1 #ifdef CONFIG_XEN -zeroentry xen_debug do_debug -zeroentry xen_int3 do_int3 -errorentry xen_stack_segment do_stack_segment +idtentry xen_debug do_debug has_error_code=0 +idtentry xen_int3 do_int3 has_error_code=0 +idtentry xen_stack_segment do_stack_segment has_error_code=1 #endif -errorentry general_protection do_general_protection -trace_errorentry page_fault do_page_fault +idtentry general_protection do_general_protection has_error_code=1 +trace_idtentry page_fault do_page_fault has_error_code=1 #ifdef CONFIG_KVM_GUEST -errorentry async_page_fault do_async_page_fault +idtentry async_page_fault do_async_page_fault has_error_code=1 #endif #ifdef CONFIG_X86_MCE -paranoidzeroentry machine_check *machine_check_vector(%rip) +idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip) #endif /* @@ -1601,7 +1649,7 @@ error_sti: */ error_kernelspace: incl %ebx - leaq irq_return(%rip),%rcx + leaq irq_return_iret(%rip),%rcx cmpq %rcx,RIP+8(%rsp) je error_swapgs movl %ecx,%eax /* zero extend */ diff --git a/arch/x86/kernel/espfix_64.c b/arch/x86/kernel/espfix_64.c new file mode 100644 index 000000000000..6afbb16e9b79 --- /dev/null +++ b/arch/x86/kernel/espfix_64.c @@ -0,0 +1,209 @@ +/* ----------------------------------------------------------------------- * + * + * Copyright 2014 Intel Corporation; author: H. Peter Anvin + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * ----------------------------------------------------------------------- */ + +/* + * The IRET instruction, when returning to a 16-bit segment, only + * restores the bottom 16 bits of the user space stack pointer. This + * causes some 16-bit software to break, but it also leaks kernel state + * to user space. + * + * This works around this by creating percpu "ministacks", each of which + * is mapped 2^16 times 64K apart. When we detect that the return SS is + * on the LDT, we copy the IRET frame to the ministack and use the + * relevant alias to return to userspace. The ministacks are mapped + * readonly, so if the IRET fault we promote #GP to #DF which is an IST + * vector and thus has its own stack; we then do the fixup in the #DF + * handler. + * + * This file sets up the ministacks and the related page tables. The + * actual ministack invocation is in entry_64.S. + */ + +#include <linux/init.h> +#include <linux/init_task.h> +#include <linux/kernel.h> +#include <linux/percpu.h> +#include <linux/gfp.h> +#include <linux/random.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/setup.h> +#include <asm/espfix.h> + +/* + * Note: we only need 6*8 = 48 bytes for the espfix stack, but round + * it up to a cache line to avoid unnecessary sharing. + */ +#define ESPFIX_STACK_SIZE (8*8UL) +#define ESPFIX_STACKS_PER_PAGE (PAGE_SIZE/ESPFIX_STACK_SIZE) + +/* There is address space for how many espfix pages? */ +#define ESPFIX_PAGE_SPACE (1UL << (PGDIR_SHIFT-PAGE_SHIFT-16)) + +#define ESPFIX_MAX_CPUS (ESPFIX_STACKS_PER_PAGE * ESPFIX_PAGE_SPACE) +#if CONFIG_NR_CPUS > ESPFIX_MAX_CPUS +# error "Need more than one PGD for the ESPFIX hack" +#endif + +#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO) + +/* This contains the *bottom* address of the espfix stack */ +DEFINE_PER_CPU_READ_MOSTLY(unsigned long, espfix_stack); +DEFINE_PER_CPU_READ_MOSTLY(unsigned long, espfix_waddr); + +/* Initialization mutex - should this be a spinlock? */ +static DEFINE_MUTEX(espfix_init_mutex); + +/* Page allocation bitmap - each page serves ESPFIX_STACKS_PER_PAGE CPUs */ +#define ESPFIX_MAX_PAGES DIV_ROUND_UP(CONFIG_NR_CPUS, ESPFIX_STACKS_PER_PAGE) +static void *espfix_pages[ESPFIX_MAX_PAGES]; + +static __page_aligned_bss pud_t espfix_pud_page[PTRS_PER_PUD] + __aligned(PAGE_SIZE); + +static unsigned int page_random, slot_random; + +/* + * This returns the bottom address of the espfix stack for a specific CPU. + * The math allows for a non-power-of-two ESPFIX_STACK_SIZE, in which case + * we have to account for some amount of padding at the end of each page. + */ +static inline unsigned long espfix_base_addr(unsigned int cpu) +{ + unsigned long page, slot; + unsigned long addr; + + page = (cpu / ESPFIX_STACKS_PER_PAGE) ^ page_random; + slot = (cpu + slot_random) % ESPFIX_STACKS_PER_PAGE; + addr = (page << PAGE_SHIFT) + (slot * ESPFIX_STACK_SIZE); + addr = (addr & 0xffffUL) | ((addr & ~0xffffUL) << 16); + addr += ESPFIX_BASE_ADDR; + return addr; +} + +#define PTE_STRIDE (65536/PAGE_SIZE) +#define ESPFIX_PTE_CLONES (PTRS_PER_PTE/PTE_STRIDE) +#define ESPFIX_PMD_CLONES PTRS_PER_PMD +#define ESPFIX_PUD_CLONES (65536/(ESPFIX_PTE_CLONES*ESPFIX_PMD_CLONES)) + +#define PGTABLE_PROT ((_KERNPG_TABLE & ~_PAGE_RW) | _PAGE_NX) + +static void init_espfix_random(void) +{ + unsigned long rand; + + /* + * This is run before the entropy pools are initialized, + * but this is hopefully better than nothing. + */ + if (!arch_get_random_long(&rand)) { + /* The constant is an arbitrary large prime */ + rdtscll(rand); + rand *= 0xc345c6b72fd16123UL; + } + + slot_random = rand % ESPFIX_STACKS_PER_PAGE; + page_random = (rand / ESPFIX_STACKS_PER_PAGE) + & (ESPFIX_PAGE_SPACE - 1); +} + +void __init init_espfix_bsp(void) +{ + pgd_t *pgd_p; + pteval_t ptemask; + + ptemask = __supported_pte_mask; + + /* Install the espfix pud into the kernel page directory */ + pgd_p = &init_level4_pgt[pgd_index(ESPFIX_BASE_ADDR)]; + pgd_populate(&init_mm, pgd_p, (pud_t *)espfix_pud_page); + + /* Randomize the locations */ + init_espfix_random(); + + /* The rest is the same as for any other processor */ + init_espfix_ap(); +} + +void init_espfix_ap(void) +{ + unsigned int cpu, page; + unsigned long addr; + pud_t pud, *pud_p; + pmd_t pmd, *pmd_p; + pte_t pte, *pte_p; + int n; + void *stack_page; + pteval_t ptemask; + + /* We only have to do this once... */ + if (likely(this_cpu_read(espfix_stack))) + return; /* Already initialized */ + + cpu = smp_processor_id(); + addr = espfix_base_addr(cpu); + page = cpu/ESPFIX_STACKS_PER_PAGE; + + /* Did another CPU already set this up? */ + stack_page = ACCESS_ONCE(espfix_pages[page]); + if (likely(stack_page)) + goto done; + + mutex_lock(&espfix_init_mutex); + + /* Did we race on the lock? */ + stack_page = ACCESS_ONCE(espfix_pages[page]); + if (stack_page) + goto unlock_done; + + ptemask = __supported_pte_mask; + + pud_p = &espfix_pud_page[pud_index(addr)]; + pud = *pud_p; + if (!pud_present(pud)) { + pmd_p = (pmd_t *)__get_free_page(PGALLOC_GFP); + pud = __pud(__pa(pmd_p) | (PGTABLE_PROT & ptemask)); + paravirt_alloc_pud(&init_mm, __pa(pmd_p) >> PAGE_SHIFT); + for (n = 0; n < ESPFIX_PUD_CLONES; n++) + set_pud(&pud_p[n], pud); + } + + pmd_p = pmd_offset(&pud, addr); + pmd = *pmd_p; + if (!pmd_present(pmd)) { + pte_p = (pte_t *)__get_free_page(PGALLOC_GFP); + pmd = __pmd(__pa(pte_p) | (PGTABLE_PROT & ptemask)); + paravirt_alloc_pmd(&init_mm, __pa(pte_p) >> PAGE_SHIFT); + for (n = 0; n < ESPFIX_PMD_CLONES; n++) + set_pmd(&pmd_p[n], pmd); + } + + pte_p = pte_offset_kernel(&pmd, addr); + stack_page = (void *)__get_free_page(GFP_KERNEL); + pte = __pte(__pa(stack_page) | (__PAGE_KERNEL_RO & ptemask)); + paravirt_alloc_pte(&init_mm, __pa(stack_page) >> PAGE_SHIFT); + for (n = 0; n < ESPFIX_PTE_CLONES; n++) + set_pte(&pte_p[n*PTE_STRIDE], pte); + + /* Job is done for this CPU and any CPU which shares this page */ + ACCESS_ONCE(espfix_pages[page]) = stack_page; + +unlock_done: + mutex_unlock(&espfix_init_mutex); +done: + this_cpu_write(espfix_stack, addr); + this_cpu_write(espfix_waddr, (unsigned long)stack_page + + (addr & ~PAGE_MASK)); +} diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 068054f4bf20..eda1a865641e 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -172,7 +172,7 @@ asmlinkage __visible void __init x86_64_start_kernel(char * real_mode_data) */ load_ucode_bsp(); - if (console_loglevel == 10) + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) early_printk("Kernel alive\n"); clear_page(init_level4_pgt); diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index 4177bfbc80b0..319bcb9372fe 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -74,9 +74,6 @@ static inline void hpet_writel(unsigned int d, unsigned int a) static inline void hpet_set_mapping(void) { hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE); -#ifdef CONFIG_X86_64 - __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VVAR_NOCACHE); -#endif } static inline void hpet_clear_mapping(void) @@ -479,7 +476,7 @@ static int hpet_msi_next_event(unsigned long delta, static int hpet_setup_msi_irq(unsigned int irq) { if (x86_msi.setup_hpet_msi(irq, hpet_blockid)) { - destroy_irq(irq); + irq_free_hwirq(irq); return -EINVAL; } return 0; @@ -487,9 +484,8 @@ static int hpet_setup_msi_irq(unsigned int irq) static int hpet_assign_irq(struct hpet_dev *dev) { - unsigned int irq; + unsigned int irq = irq_alloc_hwirq(-1); - irq = create_irq_nr(0, -1); if (!irq) return -EINVAL; diff --git a/arch/x86/kernel/iosf_mbi.c b/arch/x86/kernel/iosf_mbi.c index c3aae6672843..d30acdc1229d 100644 --- a/arch/x86/kernel/iosf_mbi.c +++ b/arch/x86/kernel/iosf_mbi.c @@ -25,6 +25,9 @@ #include <asm/iosf_mbi.h> +#define PCI_DEVICE_ID_BAYTRAIL 0x0F00 +#define PCI_DEVICE_ID_QUARK_X1000 0x0958 + static DEFINE_SPINLOCK(iosf_mbi_lock); static inline u32 iosf_mbi_form_mcr(u8 op, u8 port, u8 offset) @@ -177,6 +180,13 @@ int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask) } EXPORT_SYMBOL(iosf_mbi_modify); +bool iosf_mbi_available(void) +{ + /* Mbi isn't hot-pluggable. No remove routine is provided */ + return mbi_pdev; +} +EXPORT_SYMBOL(iosf_mbi_available); + static int iosf_mbi_probe(struct pci_dev *pdev, const struct pci_device_id *unused) { @@ -193,7 +203,8 @@ static int iosf_mbi_probe(struct pci_dev *pdev, } static DEFINE_PCI_DEVICE_TABLE(iosf_mbi_pci_ids) = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0F00) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_BAYTRAIL) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_QUARK_X1000) }, { 0, }, }; MODULE_DEVICE_TABLE(pci, iosf_mbi_pci_ids); diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index 0331cb389d68..7e97371387fd 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -259,7 +259,7 @@ do_async_page_fault(struct pt_regs *regs, unsigned long error_code) switch (kvm_read_and_reset_pf_reason()) { default: - do_page_fault(regs, error_code); + trace_do_page_fault(regs, error_code); break; case KVM_PV_REASON_PAGE_NOT_PRESENT: /* page is swapped out by the host. */ diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c index dcbbaa165bde..c37886d759cc 100644 --- a/arch/x86/kernel/ldt.c +++ b/arch/x86/kernel/ldt.c @@ -20,8 +20,6 @@ #include <asm/mmu_context.h> #include <asm/syscalls.h> -int sysctl_ldt16 = 0; - #ifdef CONFIG_SMP static void flush_ldt(void *current_mm) { @@ -231,16 +229,10 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode) } } - /* - * On x86-64 we do not support 16-bit segments due to - * IRET leaking the high bits of the kernel stack address. - */ -#ifdef CONFIG_X86_64 - if (!ldt_info.seg_32bit && !sysctl_ldt16) { + if (!IS_ENABLED(CONFIG_X86_16BIT) && !ldt_info.seg_32bit) { error = -EINVAL; goto out_unlock; } -#endif fill_ldt(&ldt, &ldt_info); if (oldmode) diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index f7d0672481fd..a25e202bb319 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -97,12 +97,17 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, dma_mask = dma_alloc_coherent_mask(dev, flag); - flag |= __GFP_ZERO; + flag &= ~__GFP_ZERO; again: page = NULL; /* CMA can be used only in the context which permits sleeping */ - if (flag & __GFP_WAIT) + if (flag & __GFP_WAIT) { page = dma_alloc_from_contiguous(dev, count, get_order(size)); + if (page && page_to_phys(page) + size > dma_mask) { + dma_release_from_contiguous(dev, page, count); + page = NULL; + } + } /* fallback */ if (!page) page = alloc_pages_node(dev_to_node(dev), flag, get_order(size)); @@ -120,7 +125,7 @@ again: return NULL; } - + memset(page_address(page), 0, size); *dma_addr = addr; return page_address(page); } diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 6c483ba98b9c..77dd0ad58be4 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -14,7 +14,7 @@ #include <asm/iommu_table.h> int swiotlb __read_mostly; -static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, +void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t flags, struct dma_attrs *attrs) { @@ -28,11 +28,14 @@ static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size, return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags); } -static void x86_swiotlb_free_coherent(struct device *dev, size_t size, +void x86_swiotlb_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_addr, struct dma_attrs *attrs) { - swiotlb_free_coherent(dev, size, vaddr, dma_addr); + if (is_swiotlb_buffer(dma_to_phys(dev, dma_addr))) + swiotlb_free_coherent(dev, size, vaddr, dma_addr); + else + dma_generic_free_coherent(dev, size, vaddr, dma_addr, attrs); } static struct dma_map_ops swiotlb_dma_ops = { diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 09c76d265550..78a0e6298922 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -1119,7 +1119,7 @@ void __init setup_arch(char **cmdline_p) setup_real_mode(); memblock_set_current_limit(get_max_mapped()); - dma_contiguous_reserve(0); + dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT); /* * NOTE: On x86-32, only from this point on, fixmaps are ready for use. diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 9e5de6813e1f..a0da58db43a8 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -298,7 +298,8 @@ __setup_frame(int sig, struct ksignal *ksig, sigset_t *set, } if (current->mm->context.vdso) - restorer = VDSO32_SYMBOL(current->mm->context.vdso, sigreturn); + restorer = current->mm->context.vdso + + selected_vdso32->sym___kernel_sigreturn; else restorer = &frame->retcode; if (ksig->ka.sa.sa_flags & SA_RESTORER) @@ -361,7 +362,8 @@ static int __setup_rt_frame(int sig, struct ksignal *ksig, save_altstack_ex(&frame->uc.uc_stack, regs->sp); /* Set up to return from userspace. */ - restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn); + restorer = current->mm->context.vdso + + selected_vdso32->sym___kernel_sigreturn; if (ksig->ka.sa.sa_flags & SA_RESTORER) restorer = ksig->ka.sa.sa_restorer; put_user_ex(restorer, &frame->pretcode); diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 34826934d4a7..5d93ac1b72db 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -244,6 +244,13 @@ static void notrace start_secondary(void *unused) check_tsc_sync_target(); /* + * Enable the espfix hack for this CPU + */ +#ifdef CONFIG_X86_ESPFIX64 + init_espfix_ap(); +#endif + + /* * We need to hold vector_lock so there the set of online cpus * does not change while we are assigning vectors to cpus. Holding * this lock ensures we don't half assign or remove an irq from a cpu. diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c index 2ed845928b5f..ace22916ade3 100644 --- a/arch/x86/kernel/uprobes.c +++ b/arch/x86/kernel/uprobes.c @@ -53,7 +53,7 @@ #define OPCODE1(insn) ((insn)->opcode.bytes[0]) #define OPCODE2(insn) ((insn)->opcode.bytes[1]) #define OPCODE3(insn) ((insn)->opcode.bytes[2]) -#define MODRM_REG(insn) X86_MODRM_REG(insn->modrm.value) +#define MODRM_REG(insn) X86_MODRM_REG((insn)->modrm.value) #define W(row, b0, b1, b2, b3, b4, b5, b6, b7, b8, b9, ba, bb, bc, bd, be, bf)\ (((b0##UL << 0x0)|(b1##UL << 0x1)|(b2##UL << 0x2)|(b3##UL << 0x3) | \ @@ -229,63 +229,6 @@ static int validate_insn_32bits(struct arch_uprobe *auprobe, struct insn *insn) return -ENOTSUPP; } -/* - * Figure out which fixups arch_uprobe_post_xol() will need to perform, and - * annotate arch_uprobe->fixups accordingly. To start with, - * arch_uprobe->fixups is either zero or it reflects rip-related fixups. - */ -static void prepare_fixups(struct arch_uprobe *auprobe, struct insn *insn) -{ - bool fix_ip = true, fix_call = false; /* defaults */ - int reg; - - insn_get_opcode(insn); /* should be a nop */ - - switch (OPCODE1(insn)) { - case 0x9d: - /* popf */ - auprobe->fixups |= UPROBE_FIX_SETF; - break; - case 0xc3: /* ret/lret */ - case 0xcb: - case 0xc2: - case 0xca: - /* ip is correct */ - fix_ip = false; - break; - case 0xe8: /* call relative - Fix return addr */ - fix_call = true; - break; - case 0x9a: /* call absolute - Fix return addr, not ip */ - fix_call = true; - fix_ip = false; - break; - case 0xff: - insn_get_modrm(insn); - reg = MODRM_REG(insn); - if (reg == 2 || reg == 3) { - /* call or lcall, indirect */ - /* Fix return addr; ip is correct. */ - fix_call = true; - fix_ip = false; - } else if (reg == 4 || reg == 5) { - /* jmp or ljmp, indirect */ - /* ip is correct. */ - fix_ip = false; - } - break; - case 0xea: /* jmp absolute -- ip is correct */ - fix_ip = false; - break; - default: - break; - } - if (fix_ip) - auprobe->fixups |= UPROBE_FIX_IP; - if (fix_call) - auprobe->fixups |= UPROBE_FIX_CALL; -} - #ifdef CONFIG_X86_64 /* * If arch_uprobe->insn doesn't use rip-relative addressing, return @@ -310,15 +253,11 @@ static void prepare_fixups(struct arch_uprobe *auprobe, struct insn *insn) * - The displacement is always 4 bytes. */ static void -handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn) +handle_riprel_insn(struct arch_uprobe *auprobe, struct insn *insn) { u8 *cursor; u8 reg; - if (mm->context.ia32_compat) - return; - - auprobe->rip_rela_target_address = 0x0; if (!insn_rip_relative(insn)) return; @@ -372,7 +311,48 @@ handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct ins cursor++; memmove(cursor, cursor + insn->displacement.nbytes, insn->immediate.nbytes); } - return; +} + +/* + * If we're emulating a rip-relative instruction, save the contents + * of the scratch register and store the target address in that register. + */ +static void +pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs, + struct arch_uprobe_task *autask) +{ + if (auprobe->fixups & UPROBE_FIX_RIP_AX) { + autask->saved_scratch_register = regs->ax; + regs->ax = current->utask->vaddr; + regs->ax += auprobe->rip_rela_target_address; + } else if (auprobe->fixups & UPROBE_FIX_RIP_CX) { + autask->saved_scratch_register = regs->cx; + regs->cx = current->utask->vaddr; + regs->cx += auprobe->rip_rela_target_address; + } +} + +static void +handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction) +{ + if (auprobe->fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) { + struct arch_uprobe_task *autask; + + autask = ¤t->utask->autask; + if (auprobe->fixups & UPROBE_FIX_RIP_AX) + regs->ax = autask->saved_scratch_register; + else + regs->cx = autask->saved_scratch_register; + + /* + * The original instruction includes a displacement, and so + * is 4 bytes longer than what we've just single-stepped. + * Caller may need to apply other fixups to handle stuff + * like "jmpq *...(%rip)" and "callq *...(%rip)". + */ + if (correction) + *correction += 4; + } } static int validate_insn_64bits(struct arch_uprobe *auprobe, struct insn *insn) @@ -401,9 +381,19 @@ static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, return validate_insn_64bits(auprobe, insn); } #else /* 32-bit: */ -static void handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn) +/* + * No RIP-relative addressing on 32-bit + */ +static void handle_riprel_insn(struct arch_uprobe *auprobe, struct insn *insn) +{ +} +static void pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs, + struct arch_uprobe_task *autask) +{ +} +static void handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, + long *correction) { - /* No RIP-relative addressing on 32-bit */ } static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn) @@ -412,141 +402,311 @@ static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, } #endif /* CONFIG_X86_64 */ -/** - * arch_uprobe_analyze_insn - instruction analysis including validity and fixups. - * @mm: the probed address space. - * @arch_uprobe: the probepoint information. - * @addr: virtual address at which to install the probepoint - * Return 0 on success or a -ve number on error. +struct uprobe_xol_ops { + bool (*emulate)(struct arch_uprobe *, struct pt_regs *); + int (*pre_xol)(struct arch_uprobe *, struct pt_regs *); + int (*post_xol)(struct arch_uprobe *, struct pt_regs *); +}; + +static inline int sizeof_long(void) +{ + return is_ia32_task() ? 4 : 8; +} + +static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) +{ + pre_xol_rip_insn(auprobe, regs, ¤t->utask->autask); + return 0; +} + +/* + * Adjust the return address pushed by a call insn executed out of line. */ -int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long addr) +static int adjust_ret_addr(unsigned long sp, long correction) { - int ret; - struct insn insn; + int rasize = sizeof_long(); + long ra; - auprobe->fixups = 0; - ret = validate_insn_bits(auprobe, mm, &insn); - if (ret != 0) - return ret; + if (copy_from_user(&ra, (void __user *)sp, rasize)) + return -EFAULT; - handle_riprel_insn(auprobe, mm, &insn); - prepare_fixups(auprobe, &insn); + ra += correction; + if (copy_to_user((void __user *)sp, &ra, rasize)) + return -EFAULT; return 0; } -#ifdef CONFIG_X86_64 -/* - * If we're emulating a rip-relative instruction, save the contents - * of the scratch register and store the target address in that register. - */ -static void -pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs, - struct arch_uprobe_task *autask) +static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) { - if (auprobe->fixups & UPROBE_FIX_RIP_AX) { - autask->saved_scratch_register = regs->ax; - regs->ax = current->utask->vaddr; - regs->ax += auprobe->rip_rela_target_address; - } else if (auprobe->fixups & UPROBE_FIX_RIP_CX) { - autask->saved_scratch_register = regs->cx; - regs->cx = current->utask->vaddr; - regs->cx += auprobe->rip_rela_target_address; + struct uprobe_task *utask = current->utask; + long correction = (long)(utask->vaddr - utask->xol_vaddr); + + handle_riprel_post_xol(auprobe, regs, &correction); + if (auprobe->fixups & UPROBE_FIX_IP) + regs->ip += correction; + + if (auprobe->fixups & UPROBE_FIX_CALL) { + if (adjust_ret_addr(regs->sp, correction)) { + regs->sp += sizeof_long(); + return -ERESTART; + } } + + return 0; } -#else -static void -pre_xol_rip_insn(struct arch_uprobe *auprobe, struct pt_regs *regs, - struct arch_uprobe_task *autask) + +static struct uprobe_xol_ops default_xol_ops = { + .pre_xol = default_pre_xol_op, + .post_xol = default_post_xol_op, +}; + +static bool branch_is_call(struct arch_uprobe *auprobe) { - /* No RIP-relative addressing on 32-bit */ + return auprobe->branch.opc1 == 0xe8; } -#endif -/* - * arch_uprobe_pre_xol - prepare to execute out of line. - * @auprobe: the probepoint information. - * @regs: reflects the saved user state of current task. - */ -int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) -{ - struct arch_uprobe_task *autask; +#define CASE_COND \ + COND(70, 71, XF(OF)) \ + COND(72, 73, XF(CF)) \ + COND(74, 75, XF(ZF)) \ + COND(78, 79, XF(SF)) \ + COND(7a, 7b, XF(PF)) \ + COND(76, 77, XF(CF) || XF(ZF)) \ + COND(7c, 7d, XF(SF) != XF(OF)) \ + COND(7e, 7f, XF(ZF) || XF(SF) != XF(OF)) - autask = ¤t->utask->autask; - autask->saved_trap_nr = current->thread.trap_nr; - current->thread.trap_nr = UPROBE_TRAP_NR; - regs->ip = current->utask->xol_vaddr; - pre_xol_rip_insn(auprobe, regs, autask); +#define COND(op_y, op_n, expr) \ + case 0x ## op_y: DO((expr) != 0) \ + case 0x ## op_n: DO((expr) == 0) - autask->saved_tf = !!(regs->flags & X86_EFLAGS_TF); - regs->flags |= X86_EFLAGS_TF; - if (test_tsk_thread_flag(current, TIF_BLOCKSTEP)) - set_task_blockstep(current, false); +#define XF(xf) (!!(flags & X86_EFLAGS_ ## xf)) - return 0; +static bool is_cond_jmp_opcode(u8 opcode) +{ + switch (opcode) { + #define DO(expr) \ + return true; + CASE_COND + #undef DO + + default: + return false; + } } -/* - * This function is called by arch_uprobe_post_xol() to adjust the return - * address pushed by a call instruction executed out of line. - */ -static int adjust_ret_addr(unsigned long sp, long correction) +static bool check_jmp_cond(struct arch_uprobe *auprobe, struct pt_regs *regs) { - int rasize, ncopied; - long ra = 0; + unsigned long flags = regs->flags; - if (is_ia32_task()) - rasize = 4; - else - rasize = 8; + switch (auprobe->branch.opc1) { + #define DO(expr) \ + return expr; + CASE_COND + #undef DO - ncopied = copy_from_user(&ra, (void __user *)sp, rasize); - if (unlikely(ncopied)) - return -EFAULT; + default: /* not a conditional jmp */ + return true; + } +} - ra += correction; - ncopied = copy_to_user((void __user *)sp, &ra, rasize); - if (unlikely(ncopied)) - return -EFAULT; +#undef XF +#undef COND +#undef CASE_COND - return 0; +static bool branch_emulate_op(struct arch_uprobe *auprobe, struct pt_regs *regs) +{ + unsigned long new_ip = regs->ip += auprobe->branch.ilen; + unsigned long offs = (long)auprobe->branch.offs; + + if (branch_is_call(auprobe)) { + unsigned long new_sp = regs->sp - sizeof_long(); + /* + * If it fails we execute this (mangled, see the comment in + * branch_clear_offset) insn out-of-line. In the likely case + * this should trigger the trap, and the probed application + * should die or restart the same insn after it handles the + * signal, arch_uprobe_post_xol() won't be even called. + * + * But there is corner case, see the comment in ->post_xol(). + */ + if (copy_to_user((void __user *)new_sp, &new_ip, sizeof_long())) + return false; + regs->sp = new_sp; + } else if (!check_jmp_cond(auprobe, regs)) { + offs = 0; + } + + regs->ip = new_ip + offs; + return true; } -#ifdef CONFIG_X86_64 -static bool is_riprel_insn(struct arch_uprobe *auprobe) +static int branch_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs) { - return ((auprobe->fixups & (UPROBE_FIX_RIP_AX | UPROBE_FIX_RIP_CX)) != 0); + BUG_ON(!branch_is_call(auprobe)); + /* + * We can only get here if branch_emulate_op() failed to push the ret + * address _and_ another thread expanded our stack before the (mangled) + * "call" insn was executed out-of-line. Just restore ->sp and restart. + * We could also restore ->ip and try to call branch_emulate_op() again. + */ + regs->sp += sizeof_long(); + return -ERESTART; } -static void -handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction) +static void branch_clear_offset(struct arch_uprobe *auprobe, struct insn *insn) { - if (is_riprel_insn(auprobe)) { - struct arch_uprobe_task *autask; + /* + * Turn this insn into "call 1f; 1:", this is what we will execute + * out-of-line if ->emulate() fails. We only need this to generate + * a trap, so that the probed task receives the correct signal with + * the properly filled siginfo. + * + * But see the comment in ->post_xol(), in the unlikely case it can + * succeed. So we need to ensure that the new ->ip can not fall into + * the non-canonical area and trigger #GP. + * + * We could turn it into (say) "pushf", but then we would need to + * divorce ->insn[] and ->ixol[]. We need to preserve the 1st byte + * of ->insn[] for set_orig_insn(). + */ + memset(auprobe->insn + insn_offset_immediate(insn), + 0, insn->immediate.nbytes); +} - autask = ¤t->utask->autask; - if (auprobe->fixups & UPROBE_FIX_RIP_AX) - regs->ax = autask->saved_scratch_register; - else - regs->cx = autask->saved_scratch_register; +static struct uprobe_xol_ops branch_xol_ops = { + .emulate = branch_emulate_op, + .post_xol = branch_post_xol_op, +}; + +/* Returns -ENOSYS if branch_xol_ops doesn't handle this insn */ +static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn) +{ + u8 opc1 = OPCODE1(insn); + + /* has the side-effect of processing the entire instruction */ + insn_get_length(insn); + if (WARN_ON_ONCE(!insn_complete(insn))) + return -ENOEXEC; + + switch (opc1) { + case 0xeb: /* jmp 8 */ + case 0xe9: /* jmp 32 */ + case 0x90: /* prefix* + nop; same as jmp with .offs = 0 */ + break; + + case 0xe8: /* call relative */ + branch_clear_offset(auprobe, insn); + break; + case 0x0f: + if (insn->opcode.nbytes != 2) + return -ENOSYS; /* - * The original instruction includes a displacement, and so - * is 4 bytes longer than what we've just single-stepped. - * Fall through to handle stuff like "jmpq *...(%rip)" and - * "callq *...(%rip)". + * If it is a "near" conditional jmp, OPCODE2() - 0x10 matches + * OPCODE1() of the "short" jmp which checks the same condition. */ - if (correction) - *correction += 4; + opc1 = OPCODE2(insn) - 0x10; + default: + if (!is_cond_jmp_opcode(opc1)) + return -ENOSYS; } + + auprobe->branch.opc1 = opc1; + auprobe->branch.ilen = insn->length; + auprobe->branch.offs = insn->immediate.value; + + auprobe->ops = &branch_xol_ops; + return 0; } -#else -static void -handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *correction) + +/** + * arch_uprobe_analyze_insn - instruction analysis including validity and fixups. + * @mm: the probed address space. + * @arch_uprobe: the probepoint information. + * @addr: virtual address at which to install the probepoint + * Return 0 on success or a -ve number on error. + */ +int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long addr) +{ + struct insn insn; + bool fix_ip = true, fix_call = false; + int ret; + + ret = validate_insn_bits(auprobe, mm, &insn); + if (ret) + return ret; + + ret = branch_setup_xol_ops(auprobe, &insn); + if (ret != -ENOSYS) + return ret; + + /* + * Figure out which fixups arch_uprobe_post_xol() will need to perform, + * and annotate arch_uprobe->fixups accordingly. To start with, ->fixups + * is either zero or it reflects rip-related fixups. + */ + switch (OPCODE1(&insn)) { + case 0x9d: /* popf */ + auprobe->fixups |= UPROBE_FIX_SETF; + break; + case 0xc3: /* ret or lret -- ip is correct */ + case 0xcb: + case 0xc2: + case 0xca: + fix_ip = false; + break; + case 0x9a: /* call absolute - Fix return addr, not ip */ + fix_call = true; + fix_ip = false; + break; + case 0xea: /* jmp absolute -- ip is correct */ + fix_ip = false; + break; + case 0xff: + insn_get_modrm(&insn); + switch (MODRM_REG(&insn)) { + case 2: case 3: /* call or lcall, indirect */ + fix_call = true; + case 4: case 5: /* jmp or ljmp, indirect */ + fix_ip = false; + } + /* fall through */ + default: + handle_riprel_insn(auprobe, &insn); + } + + if (fix_ip) + auprobe->fixups |= UPROBE_FIX_IP; + if (fix_call) + auprobe->fixups |= UPROBE_FIX_CALL; + + auprobe->ops = &default_xol_ops; + return 0; +} + +/* + * arch_uprobe_pre_xol - prepare to execute out of line. + * @auprobe: the probepoint information. + * @regs: reflects the saved user state of current task. + */ +int arch_uprobe_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { - /* No RIP-relative addressing on 32-bit */ + struct uprobe_task *utask = current->utask; + + regs->ip = utask->xol_vaddr; + utask->autask.saved_trap_nr = current->thread.trap_nr; + current->thread.trap_nr = UPROBE_TRAP_NR; + + utask->autask.saved_tf = !!(regs->flags & X86_EFLAGS_TF); + regs->flags |= X86_EFLAGS_TF; + if (test_tsk_thread_flag(current, TIF_BLOCKSTEP)) + set_task_blockstep(current, false); + + if (auprobe->ops->pre_xol) + return auprobe->ops->pre_xol(auprobe, regs); + return 0; } -#endif /* * If xol insn itself traps and generates a signal(Say, @@ -592,22 +752,25 @@ bool arch_uprobe_xol_was_trapped(struct task_struct *t) */ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { - struct uprobe_task *utask; - long correction; - int result = 0; + struct uprobe_task *utask = current->utask; WARN_ON_ONCE(current->thread.trap_nr != UPROBE_TRAP_NR); - utask = current->utask; - current->thread.trap_nr = utask->autask.saved_trap_nr; - correction = (long)(utask->vaddr - utask->xol_vaddr); - handle_riprel_post_xol(auprobe, regs, &correction); - if (auprobe->fixups & UPROBE_FIX_IP) - regs->ip += correction; - - if (auprobe->fixups & UPROBE_FIX_CALL) - result = adjust_ret_addr(regs->sp, correction); + if (auprobe->ops->post_xol) { + int err = auprobe->ops->post_xol(auprobe, regs); + if (err) { + arch_uprobe_abort_xol(auprobe, regs); + /* + * Restart the probed insn. ->post_xol() must ensure + * this is really possible if it returns -ERESTART. + */ + if (err == -ERESTART) + return 0; + return err; + } + } + current->thread.trap_nr = utask->autask.saved_trap_nr; /* * arch_uprobe_pre_xol() doesn't save the state of TIF_BLOCKSTEP * so we can get an extra SIGTRAP if we do not clear TF. We need @@ -618,7 +781,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) else if (!(auprobe->fixups & UPROBE_FIX_SETF)) regs->flags &= ~X86_EFLAGS_TF; - return result; + return 0; } /* callback routine for handling exceptions. */ @@ -652,8 +815,9 @@ int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, /* * This function gets called when XOL instruction either gets trapped or - * the thread has a fatal signal, so reset the instruction pointer to its - * probed address. + * the thread has a fatal signal, or if arch_uprobe_post_xol() failed. + * Reset the instruction pointer to its probed address for the potential + * restart or for post mortem analysis. */ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) { @@ -668,25 +832,10 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) regs->flags &= ~X86_EFLAGS_TF; } -/* - * Skip these instructions as per the currently known x86 ISA. - * rep=0x66*; nop=0x90 - */ static bool __skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) { - int i; - - for (i = 0; i < MAX_UINSN_BYTES; i++) { - if (auprobe->insn[i] == 0x66) - continue; - - if (auprobe->insn[i] == 0x90) { - regs->ip += i + 1; - return true; - } - - break; - } + if (auprobe->ops->emulate) + return auprobe->ops->emulate(auprobe, regs); return false; } @@ -701,23 +850,21 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs) unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs) { - int rasize, ncopied; + int rasize = sizeof_long(), nleft; unsigned long orig_ret_vaddr = 0; /* clear high bits for 32-bit apps */ - rasize = is_ia32_task() ? 4 : 8; - ncopied = copy_from_user(&orig_ret_vaddr, (void __user *)regs->sp, rasize); - if (unlikely(ncopied)) + if (copy_from_user(&orig_ret_vaddr, (void __user *)regs->sp, rasize)) return -1; /* check whether address has been already hijacked */ if (orig_ret_vaddr == trampoline_vaddr) return orig_ret_vaddr; - ncopied = copy_to_user((void __user *)regs->sp, &trampoline_vaddr, rasize); - if (likely(!ncopied)) + nleft = copy_to_user((void __user *)regs->sp, &trampoline_vaddr, rasize); + if (likely(!nleft)) return orig_ret_vaddr; - if (ncopied != rasize) { + if (nleft != rasize) { pr_err("uprobe: return address clobbered: pid=%d, %%sp=%#lx, " "%%ip=%#lx\n", current->pid, regs->sp, regs->ip); diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 8b3b3eb3cead..ea5b5709aa76 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -91,7 +91,7 @@ static int addr_to_vsyscall_nr(unsigned long addr) { int nr; - if ((addr & ~0xC00UL) != VSYSCALL_START) + if ((addr & ~0xC00UL) != VSYSCALL_ADDR) return -EINVAL; nr = (addr & 0xC00UL) >> 10; @@ -330,24 +330,17 @@ void __init map_vsyscall(void) { extern char __vsyscall_page; unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page); - unsigned long physaddr_vvar_page = __pa_symbol(&__vvar_page); - __set_fixmap(VSYSCALL_FIRST_PAGE, physaddr_vsyscall, + __set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall, vsyscall_mode == NATIVE ? PAGE_KERNEL_VSYSCALL : PAGE_KERNEL_VVAR); - BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_FIRST_PAGE) != - (unsigned long)VSYSCALL_START); - - __set_fixmap(VVAR_PAGE, physaddr_vvar_page, PAGE_KERNEL_VVAR); - BUILD_BUG_ON((unsigned long)__fix_to_virt(VVAR_PAGE) != - (unsigned long)VVAR_ADDRESS); + BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) != + (unsigned long)VSYSCALL_ADDR); } static int __init vsyscall_init(void) { - BUG_ON(VSYSCALL_ADDR(0) != __fix_to_virt(VSYSCALL_FIRST_PAGE)); - cpu_notifier_register_begin(); on_each_cpu(cpu_vsyscall_init, NULL, 1); diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c index f47a104a749c..38a0afe83c6b 100644 --- a/arch/x86/kvm/cpuid.c +++ b/arch/x86/kvm/cpuid.c @@ -283,6 +283,8 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, 0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW); /* cpuid 1.ecx */ const u32 kvm_supported_word4_x86_features = + /* NOTE: MONITOR (and MWAIT) are emulated as NOP, + * but *not* advertised to guests via CPUID ! */ F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ | 0 /* DS-CPL, VMX, SMX, EST */ | 0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ | @@ -495,6 +497,13 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, entry->ecx &= kvm_supported_word6_x86_features; cpuid_mask(&entry->ecx, 6); break; + case 0x80000007: /* Advanced power management */ + /* invariant TSC is CPUID.80000007H:EDX[8] */ + entry->edx &= (1 << 8); + /* mask against host */ + entry->edx &= boot_cpu_data.x86_power; + entry->eax = entry->ebx = entry->ecx = 0; + break; case 0x80000008: { unsigned g_phys_as = (entry->eax >> 16) & 0xff; unsigned virt_as = max((entry->eax >> 8) & 0xff, 48U); @@ -525,7 +534,6 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function, case 3: /* Processor serial number */ case 5: /* MONITOR/MWAIT */ case 6: /* Thermal management */ - case 0x80000007: /* Advanced power management */ case 0xC0000002: case 0xC0000003: case 0xC0000004: @@ -726,6 +734,7 @@ int cpuid_maxphyaddr(struct kvm_vcpu *vcpu) not_found: return 36; } +EXPORT_SYMBOL_GPL(cpuid_maxphyaddr); /* * If no match is found, check whether we exceed the vCPU's limit diff --git a/arch/x86/kvm/cpuid.h b/arch/x86/kvm/cpuid.h index eeecbed26ac7..f9087315e0cd 100644 --- a/arch/x86/kvm/cpuid.h +++ b/arch/x86/kvm/cpuid.h @@ -88,4 +88,11 @@ static inline bool guest_cpuid_has_x2apic(struct kvm_vcpu *vcpu) return best && (best->ecx & bit(X86_FEATURE_X2APIC)); } +static inline bool guest_cpuid_has_gbpages(struct kvm_vcpu *vcpu) +{ + struct kvm_cpuid_entry2 *best; + + best = kvm_find_cpuid_entry(vcpu, 0x80000001, 0); + return best && (best->edx & bit(X86_FEATURE_GBPAGES)); +} #endif diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 205b17eed93c..e4e833d3d7d7 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -161,6 +161,7 @@ #define Fastop ((u64)1 << 44) /* Use opcode::u.fastop */ #define NoWrite ((u64)1 << 45) /* No writeback */ #define SrcWrite ((u64)1 << 46) /* Write back src operand */ +#define NoMod ((u64)1 << 47) /* Mod field is ignored */ #define DstXacc (DstAccLo | SrcAccHi | SrcWrite) @@ -1077,7 +1078,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt, ctxt->modrm_rm |= (ctxt->modrm & 0x07); ctxt->modrm_seg = VCPU_SREG_DS; - if (ctxt->modrm_mod == 3) { + if (ctxt->modrm_mod == 3 || (ctxt->d & NoMod)) { op->type = OP_REG; op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes; op->addr.reg = decode_register(ctxt, ctxt->modrm_rm, @@ -1324,7 +1325,8 @@ static int pio_in_emulated(struct x86_emulate_ctxt *ctxt, rc->end = n * size; } - if (ctxt->rep_prefix && !(ctxt->eflags & EFLG_DF)) { + if (ctxt->rep_prefix && (ctxt->d & String) && + !(ctxt->eflags & EFLG_DF)) { ctxt->dst.data = rc->data + rc->pos; ctxt->dst.type = OP_MEM_STR; ctxt->dst.count = (rc->end - rc->pos) / size; @@ -1409,11 +1411,11 @@ static int write_segment_descriptor(struct x86_emulate_ctxt *ctxt, } /* Does not support long mode */ -static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt, - u16 selector, int seg) +static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt, + u16 selector, int seg, u8 cpl, bool in_task_switch) { struct desc_struct seg_desc, old_desc; - u8 dpl, rpl, cpl; + u8 dpl, rpl; unsigned err_vec = GP_VECTOR; u32 err_code = 0; bool null_selector = !(selector & ~0x3); /* 0000-0003 are null */ @@ -1441,7 +1443,6 @@ static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt, } rpl = selector & 3; - cpl = ctxt->ops->cpl(ctxt); /* NULL selector is not valid for TR, CS and SS (except for long mode) */ if ((seg == VCPU_SREG_CS @@ -1486,6 +1487,9 @@ static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt, goto exception; break; case VCPU_SREG_CS: + if (in_task_switch && rpl != dpl) + goto exception; + if (!(seg_desc.type & 8)) goto exception; @@ -1543,6 +1547,13 @@ exception: return X86EMUL_PROPAGATE_FAULT; } +static int load_segment_descriptor(struct x86_emulate_ctxt *ctxt, + u16 selector, int seg) +{ + u8 cpl = ctxt->ops->cpl(ctxt); + return __load_segment_descriptor(ctxt, selector, seg, cpl, false); +} + static void write_register_operand(struct operand *op) { /* The 4-byte case *is* correct: in 64-bit mode we zero-extend. */ @@ -2404,6 +2415,7 @@ static int load_state_from_tss16(struct x86_emulate_ctxt *ctxt, struct tss_segment_16 *tss) { int ret; + u8 cpl; ctxt->_eip = tss->ip; ctxt->eflags = tss->flag | 2; @@ -2426,23 +2438,25 @@ static int load_state_from_tss16(struct x86_emulate_ctxt *ctxt, set_segment_selector(ctxt, tss->ss, VCPU_SREG_SS); set_segment_selector(ctxt, tss->ds, VCPU_SREG_DS); + cpl = tss->cs & 3; + /* * Now load segment descriptors. If fault happens at this stage * it is handled in a context of new task */ - ret = load_segment_descriptor(ctxt, tss->ldt, VCPU_SREG_LDTR); + ret = __load_segment_descriptor(ctxt, tss->ldt, VCPU_SREG_LDTR, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES); + ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS); + ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS); + ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS); + ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; @@ -2496,7 +2510,7 @@ static int task_switch_16(struct x86_emulate_ctxt *ctxt, static void save_state_to_tss32(struct x86_emulate_ctxt *ctxt, struct tss_segment_32 *tss) { - tss->cr3 = ctxt->ops->get_cr(ctxt, 3); + /* CR3 and ldt selector are not saved intentionally */ tss->eip = ctxt->_eip; tss->eflags = ctxt->eflags; tss->eax = reg_read(ctxt, VCPU_REGS_RAX); @@ -2514,13 +2528,13 @@ static void save_state_to_tss32(struct x86_emulate_ctxt *ctxt, tss->ds = get_segment_selector(ctxt, VCPU_SREG_DS); tss->fs = get_segment_selector(ctxt, VCPU_SREG_FS); tss->gs = get_segment_selector(ctxt, VCPU_SREG_GS); - tss->ldt_selector = get_segment_selector(ctxt, VCPU_SREG_LDTR); } static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt, struct tss_segment_32 *tss) { int ret; + u8 cpl; if (ctxt->ops->set_cr(ctxt, 3, tss->cr3)) return emulate_gp(ctxt, 0); @@ -2539,7 +2553,8 @@ static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt, /* * SDM says that segment selectors are loaded before segment - * descriptors + * descriptors. This is important because CPL checks will + * use CS.RPL. */ set_segment_selector(ctxt, tss->ldt_selector, VCPU_SREG_LDTR); set_segment_selector(ctxt, tss->es, VCPU_SREG_ES); @@ -2553,43 +2568,38 @@ static int load_state_from_tss32(struct x86_emulate_ctxt *ctxt, * If we're switching between Protected Mode and VM86, we need to make * sure to update the mode before loading the segment descriptors so * that the selectors are interpreted correctly. - * - * Need to get rflags to the vcpu struct immediately because it - * influences the CPL which is checked at least when loading the segment - * descriptors and when pushing an error code to the new kernel stack. - * - * TODO Introduce a separate ctxt->ops->set_cpl callback */ - if (ctxt->eflags & X86_EFLAGS_VM) + if (ctxt->eflags & X86_EFLAGS_VM) { ctxt->mode = X86EMUL_MODE_VM86; - else + cpl = 3; + } else { ctxt->mode = X86EMUL_MODE_PROT32; - - ctxt->ops->set_rflags(ctxt, ctxt->eflags); + cpl = tss->cs & 3; + } /* * Now load segment descriptors. If fault happenes at this stage * it is handled in a context of new task */ - ret = load_segment_descriptor(ctxt, tss->ldt_selector, VCPU_SREG_LDTR); + ret = __load_segment_descriptor(ctxt, tss->ldt_selector, VCPU_SREG_LDTR, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES); + ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS); + ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS); + ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS); + ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->fs, VCPU_SREG_FS); + ret = __load_segment_descriptor(ctxt, tss->fs, VCPU_SREG_FS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; - ret = load_segment_descriptor(ctxt, tss->gs, VCPU_SREG_GS); + ret = __load_segment_descriptor(ctxt, tss->gs, VCPU_SREG_GS, cpl, true); if (ret != X86EMUL_CONTINUE) return ret; @@ -2604,6 +2614,8 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt, struct tss_segment_32 tss_seg; int ret; u32 new_tss_base = get_desc_base(new_desc); + u32 eip_offset = offsetof(struct tss_segment_32, eip); + u32 ldt_sel_offset = offsetof(struct tss_segment_32, ldt_selector); ret = ops->read_std(ctxt, old_tss_base, &tss_seg, sizeof tss_seg, &ctxt->exception); @@ -2613,8 +2625,9 @@ static int task_switch_32(struct x86_emulate_ctxt *ctxt, save_state_to_tss32(ctxt, &tss_seg); - ret = ops->write_std(ctxt, old_tss_base, &tss_seg, sizeof tss_seg, - &ctxt->exception); + /* Only GP registers and segment selectors are saved */ + ret = ops->write_std(ctxt, old_tss_base + eip_offset, &tss_seg.eip, + ldt_sel_offset - eip_offset, &ctxt->exception); if (ret != X86EMUL_CONTINUE) /* FIXME: need to provide precise fault address */ return ret; @@ -3386,10 +3399,6 @@ static int check_cr_write(struct x86_emulate_ctxt *ctxt) ctxt->ops->get_msr(ctxt, MSR_EFER, &efer); if (efer & EFER_LMA) rsvd = CR3_L_MODE_RESERVED_BITS; - else if (ctxt->ops->get_cr(ctxt, 4) & X86_CR4_PAE) - rsvd = CR3_PAE_RESERVED_BITS; - else if (ctxt->ops->get_cr(ctxt, 0) & X86_CR0_PG) - rsvd = CR3_NONPAE_RESERVED_BITS; if (new_val & rsvd) return emulate_gp(ctxt, 0); @@ -3869,10 +3878,12 @@ static const struct opcode twobyte_table[256] = { N, N, N, N, N, N, N, N, D(ImplicitOps | ModRM), N, N, N, N, N, N, D(ImplicitOps | ModRM), /* 0x20 - 0x2F */ - DIP(ModRM | DstMem | Priv | Op3264, cr_read, check_cr_read), - DIP(ModRM | DstMem | Priv | Op3264, dr_read, check_dr_read), - IIP(ModRM | SrcMem | Priv | Op3264, em_cr_write, cr_write, check_cr_write), - IIP(ModRM | SrcMem | Priv | Op3264, em_dr_write, dr_write, check_dr_write), + DIP(ModRM | DstMem | Priv | Op3264 | NoMod, cr_read, check_cr_read), + DIP(ModRM | DstMem | Priv | Op3264 | NoMod, dr_read, check_dr_read), + IIP(ModRM | SrcMem | Priv | Op3264 | NoMod, em_cr_write, cr_write, + check_cr_write), + IIP(ModRM | SrcMem | Priv | Op3264 | NoMod, em_dr_write, dr_write, + check_dr_write), N, N, N, N, GP(ModRM | DstReg | SrcMem | Mov | Sse, &pfx_0f_28_0f_29), GP(ModRM | DstMem | SrcReg | Mov | Sse, &pfx_0f_28_0f_29), diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c index 484bc874688b..bd0da433e6d7 100644 --- a/arch/x86/kvm/irq.c +++ b/arch/x86/kvm/irq.c @@ -113,6 +113,7 @@ int kvm_cpu_get_interrupt(struct kvm_vcpu *v) return kvm_get_apic_interrupt(v); /* APIC */ } +EXPORT_SYMBOL_GPL(kvm_cpu_get_interrupt); void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu) { diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 9736529ade08..006911858174 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -360,6 +360,8 @@ static inline void apic_clear_irr(int vec, struct kvm_lapic *apic) static inline void apic_set_isr(int vec, struct kvm_lapic *apic) { + /* Note that we never get here with APIC virtualization enabled. */ + if (!__apic_test_and_set_vector(vec, apic->regs + APIC_ISR)) ++apic->isr_count; BUG_ON(apic->isr_count > MAX_APIC_VECTOR); @@ -371,12 +373,48 @@ static inline void apic_set_isr(int vec, struct kvm_lapic *apic) apic->highest_isr_cache = vec; } +static inline int apic_find_highest_isr(struct kvm_lapic *apic) +{ + int result; + + /* + * Note that isr_count is always 1, and highest_isr_cache + * is always -1, with APIC virtualization enabled. + */ + if (!apic->isr_count) + return -1; + if (likely(apic->highest_isr_cache != -1)) + return apic->highest_isr_cache; + + result = find_highest_vector(apic->regs + APIC_ISR); + ASSERT(result == -1 || result >= 16); + + return result; +} + static inline void apic_clear_isr(int vec, struct kvm_lapic *apic) { - if (__apic_test_and_clear_vector(vec, apic->regs + APIC_ISR)) + struct kvm_vcpu *vcpu; + if (!__apic_test_and_clear_vector(vec, apic->regs + APIC_ISR)) + return; + + vcpu = apic->vcpu; + + /* + * We do get here for APIC virtualization enabled if the guest + * uses the Hyper-V APIC enlightenment. In this case we may need + * to trigger a new interrupt delivery by writing the SVI field; + * on the other hand isr_count and highest_isr_cache are unused + * and must be left alone. + */ + if (unlikely(kvm_apic_vid_enabled(vcpu->kvm))) + kvm_x86_ops->hwapic_isr_update(vcpu->kvm, + apic_find_highest_isr(apic)); + else { --apic->isr_count; - BUG_ON(apic->isr_count < 0); - apic->highest_isr_cache = -1; + BUG_ON(apic->isr_count < 0); + apic->highest_isr_cache = -1; + } } int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu) @@ -456,22 +494,6 @@ static void pv_eoi_clr_pending(struct kvm_vcpu *vcpu) __clear_bit(KVM_APIC_PV_EOI_PENDING, &vcpu->arch.apic_attention); } -static inline int apic_find_highest_isr(struct kvm_lapic *apic) -{ - int result; - - /* Note that isr_count is always 1 with vid enabled */ - if (!apic->isr_count) - return -1; - if (likely(apic->highest_isr_cache != -1)) - return apic->highest_isr_cache; - - result = find_highest_vector(apic->regs + APIC_ISR); - ASSERT(result == -1 || result >= 16); - - return result; -} - void kvm_apic_update_tmr(struct kvm_vcpu *vcpu, u32 *tmr) { struct kvm_lapic *apic = vcpu->arch.apic; @@ -1605,6 +1627,8 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu) int vector = kvm_apic_has_interrupt(vcpu); struct kvm_lapic *apic = vcpu->arch.apic; + /* Note that we never get here with APIC virtualization enabled. */ + if (vector == -1) return -1; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 813d31038b93..931467881da7 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -22,6 +22,7 @@ #include "mmu.h" #include "x86.h" #include "kvm_cache_regs.h" +#include "cpuid.h" #include <linux/kvm_host.h> #include <linux/types.h> @@ -595,7 +596,8 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte) * we always atomicly update it, see the comments in * spte_has_volatile_bits(). */ - if (is_writable_pte(old_spte) && !is_writable_pte(new_spte)) + if (spte_is_locklessly_modifiable(old_spte) && + !is_writable_pte(new_spte)) ret = true; if (!shadow_accessed_mask) @@ -1176,8 +1178,7 @@ static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep) /* * Write-protect on the specified @sptep, @pt_protect indicates whether - * spte writ-protection is caused by protecting shadow page table. - * @flush indicates whether tlb need be flushed. + * spte write-protection is caused by protecting shadow page table. * * Note: write protection is difference between drity logging and spte * protection: @@ -1186,10 +1187,9 @@ static void drop_large_spte(struct kvm_vcpu *vcpu, u64 *sptep) * - for spte protection, the spte can be writable only after unsync-ing * shadow page. * - * Return true if the spte is dropped. + * Return true if tlb need be flushed. */ -static bool -spte_write_protect(struct kvm *kvm, u64 *sptep, bool *flush, bool pt_protect) +static bool spte_write_protect(struct kvm *kvm, u64 *sptep, bool pt_protect) { u64 spte = *sptep; @@ -1199,17 +1199,11 @@ spte_write_protect(struct kvm *kvm, u64 *sptep, bool *flush, bool pt_protect) rmap_printk("rmap_write_protect: spte %p %llx\n", sptep, *sptep); - if (__drop_large_spte(kvm, sptep)) { - *flush |= true; - return true; - } - if (pt_protect) spte &= ~SPTE_MMU_WRITEABLE; spte = spte & ~PT_WRITABLE_MASK; - *flush |= mmu_spte_update(sptep, spte); - return false; + return mmu_spte_update(sptep, spte); } static bool __rmap_write_protect(struct kvm *kvm, unsigned long *rmapp, @@ -1221,11 +1215,8 @@ static bool __rmap_write_protect(struct kvm *kvm, unsigned long *rmapp, for (sptep = rmap_get_first(*rmapp, &iter); sptep;) { BUG_ON(!(*sptep & PT_PRESENT_MASK)); - if (spte_write_protect(kvm, sptep, &flush, pt_protect)) { - sptep = rmap_get_first(*rmapp, &iter); - continue; - } + flush |= spte_write_protect(kvm, sptep, pt_protect); sptep = rmap_get_next(&iter); } @@ -2802,9 +2793,9 @@ static bool page_fault_can_be_fast(u32 error_code) } static bool -fast_pf_fix_direct_spte(struct kvm_vcpu *vcpu, u64 *sptep, u64 spte) +fast_pf_fix_direct_spte(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp, + u64 *sptep, u64 spte) { - struct kvm_mmu_page *sp = page_header(__pa(sptep)); gfn_t gfn; WARN_ON(!sp->role.direct); @@ -2830,6 +2821,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level, u32 error_code) { struct kvm_shadow_walk_iterator iterator; + struct kvm_mmu_page *sp; bool ret = false; u64 spte = 0ull; @@ -2853,7 +2845,8 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level, goto exit; } - if (!is_last_spte(spte, level)) + sp = page_header(__pa(iterator.sptep)); + if (!is_last_spte(spte, sp->role.level)) goto exit; /* @@ -2875,11 +2868,24 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level, goto exit; /* + * Do not fix write-permission on the large spte since we only dirty + * the first page into the dirty-bitmap in fast_pf_fix_direct_spte() + * that means other pages are missed if its slot is dirty-logged. + * + * Instead, we let the slow page fault path create a normal spte to + * fix the access. + * + * See the comments in kvm_arch_commit_memory_region(). + */ + if (sp->role.level > PT_PAGE_TABLE_LEVEL) + goto exit; + + /* * Currently, fast page fault only works for direct mapping since * the gfn is not stable for indirect shadow page. * See Documentation/virtual/kvm/locking.txt to get more detail. */ - ret = fast_pf_fix_direct_spte(vcpu, iterator.sptep, spte); + ret = fast_pf_fix_direct_spte(vcpu, sp, iterator.sptep, spte); exit: trace_fast_page_fault(vcpu, gva, error_code, iterator.sptep, spte, ret); @@ -3511,11 +3517,14 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, { int maxphyaddr = cpuid_maxphyaddr(vcpu); u64 exb_bit_rsvd = 0; + u64 gbpages_bit_rsvd = 0; context->bad_mt_xwr = 0; if (!context->nx) exb_bit_rsvd = rsvd_bits(63, 63); + if (!guest_cpuid_has_gbpages(vcpu)) + gbpages_bit_rsvd = rsvd_bits(7, 7); switch (context->root_level) { case PT32_ROOT_LEVEL: /* no rsvd bits for 2 level 4K page table entries */ @@ -3538,7 +3547,7 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, case PT32E_ROOT_LEVEL: context->rsvd_bits_mask[0][2] = rsvd_bits(maxphyaddr, 63) | - rsvd_bits(7, 8) | rsvd_bits(1, 2); /* PDPTE */ + rsvd_bits(5, 8) | rsvd_bits(1, 2); /* PDPTE */ context->rsvd_bits_mask[0][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 62); /* PDE */ context->rsvd_bits_mask[0][0] = exb_bit_rsvd | @@ -3550,16 +3559,16 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, break; case PT64_ROOT_LEVEL: context->rsvd_bits_mask[0][3] = exb_bit_rsvd | - rsvd_bits(maxphyaddr, 51) | rsvd_bits(7, 8); + rsvd_bits(maxphyaddr, 51) | rsvd_bits(7, 7); context->rsvd_bits_mask[0][2] = exb_bit_rsvd | - rsvd_bits(maxphyaddr, 51) | rsvd_bits(7, 8); + gbpages_bit_rsvd | rsvd_bits(maxphyaddr, 51); context->rsvd_bits_mask[0][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51); context->rsvd_bits_mask[0][0] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51); context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3]; context->rsvd_bits_mask[1][2] = exb_bit_rsvd | - rsvd_bits(maxphyaddr, 51) | + gbpages_bit_rsvd | rsvd_bits(maxphyaddr, 51) | rsvd_bits(13, 29); context->rsvd_bits_mask[1][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51) | @@ -4304,15 +4313,32 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm, int slot) if (*rmapp) __rmap_write_protect(kvm, rmapp, false); - if (need_resched() || spin_needbreak(&kvm->mmu_lock)) { - kvm_flush_remote_tlbs(kvm); + if (need_resched() || spin_needbreak(&kvm->mmu_lock)) cond_resched_lock(&kvm->mmu_lock); - } } } - kvm_flush_remote_tlbs(kvm); spin_unlock(&kvm->mmu_lock); + + /* + * kvm_mmu_slot_remove_write_access() and kvm_vm_ioctl_get_dirty_log() + * which do tlb flush out of mmu-lock should be serialized by + * kvm->slots_lock otherwise tlb flush would be missed. + */ + lockdep_assert_held(&kvm->slots_lock); + + /* + * We can flush all the TLBs out of the mmu lock without TLB + * corruption since we just change the spte from writable to + * readonly so that we only need to care the case of changing + * spte from present to present (changing the spte from present + * to nonpresent will flush all the TLBs immediately), in other + * words, the only case we care is mmu_spte_update() where we + * haved checked SPTE_HOST_WRITEABLE | SPTE_MMU_WRITEABLE + * instead of PT_WRITABLE_MASK, that means it does not depend + * on PT_WRITABLE_MASK anymore. + */ + kvm_flush_remote_tlbs(kvm); } #define BATCH_ZAP_PAGES 10 diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h index 3842e70bdb7c..b982112d2ca5 100644 --- a/arch/x86/kvm/mmu.h +++ b/arch/x86/kvm/mmu.h @@ -104,6 +104,39 @@ static inline int is_present_gpte(unsigned long pte) return pte & PT_PRESENT_MASK; } +/* + * Currently, we have two sorts of write-protection, a) the first one + * write-protects guest page to sync the guest modification, b) another one is + * used to sync dirty bitmap when we do KVM_GET_DIRTY_LOG. The differences + * between these two sorts are: + * 1) the first case clears SPTE_MMU_WRITEABLE bit. + * 2) the first case requires flushing tlb immediately avoiding corrupting + * shadow page table between all vcpus so it should be in the protection of + * mmu-lock. And the another case does not need to flush tlb until returning + * the dirty bitmap to userspace since it only write-protects the page + * logged in the bitmap, that means the page in the dirty bitmap is not + * missed, so it can flush tlb out of mmu-lock. + * + * So, there is the problem: the first case can meet the corrupted tlb caused + * by another case which write-protects pages but without flush tlb + * immediately. In order to making the first case be aware this problem we let + * it flush tlb if we try to write-protect a spte whose SPTE_MMU_WRITEABLE bit + * is set, it works since another case never touches SPTE_MMU_WRITEABLE bit. + * + * Anyway, whenever a spte is updated (only permission and status bits are + * changed) we need to check whether the spte with SPTE_MMU_WRITEABLE becomes + * readonly, if that happens, we need to flush tlb. Fortunately, + * mmu_spte_update() has already handled it perfectly. + * + * The rules to use SPTE_MMU_WRITEABLE and PT_WRITABLE_MASK: + * - if we want to see if it has writable tlb entry or if the spte can be + * writable on the mmu mapping, check SPTE_MMU_WRITEABLE, this is the most + * case, otherwise + * - if we fix page fault on the spte or do write-protection by dirty logging, + * check PT_WRITABLE_MASK. + * + * TODO: introduce APIs to split these two cases. + */ static inline int is_writable_pte(unsigned long pte) { return pte & PT_WRITABLE_MASK; diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 123efd3ec29f..410776528265 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -913,8 +913,7 @@ static gpa_t FNAME(gva_to_gpa_nested)(struct kvm_vcpu *vcpu, gva_t vaddr, * and kvm_mmu_notifier_invalidate_range_start detect the mapping page isn't * used by guest then tlbs are not flushed, so guest is allowed to access the * freed pages. - * We set tlbs_dirty to let the notifier know this change and delay the flush - * until such a case actually happens. + * And we increase kvm->tlbs_dirty to delay tlbs flush in this case. */ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) { @@ -943,7 +942,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) return -EINVAL; if (FNAME(prefetch_invalid_gpte)(vcpu, sp, &sp->spt[i], gpte)) { - vcpu->kvm->tlbs_dirty = true; + vcpu->kvm->tlbs_dirty++; continue; } @@ -958,7 +957,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp) if (gfn != sp->gfns[i]) { drop_spte(vcpu->kvm, &sp->spt[i]); - vcpu->kvm->tlbs_dirty = true; + vcpu->kvm->tlbs_dirty++; continue; } diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c index 5c4f63151b4d..cbecaa90399c 100644 --- a/arch/x86/kvm/pmu.c +++ b/arch/x86/kvm/pmu.c @@ -108,7 +108,10 @@ static void kvm_perf_overflow(struct perf_event *perf_event, { struct kvm_pmc *pmc = perf_event->overflow_handler_context; struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; - __set_bit(pmc->idx, (unsigned long *)&pmu->global_status); + if (!test_and_set_bit(pmc->idx, (unsigned long *)&pmu->reprogram_pmi)) { + __set_bit(pmc->idx, (unsigned long *)&pmu->global_status); + kvm_make_request(KVM_REQ_PMU, pmc->vcpu); + } } static void kvm_perf_overflow_intr(struct perf_event *perf_event, @@ -117,7 +120,7 @@ static void kvm_perf_overflow_intr(struct perf_event *perf_event, struct kvm_pmc *pmc = perf_event->overflow_handler_context; struct kvm_pmu *pmu = &pmc->vcpu->arch.pmu; if (!test_and_set_bit(pmc->idx, (unsigned long *)&pmu->reprogram_pmi)) { - kvm_perf_overflow(perf_event, data, regs); + __set_bit(pmc->idx, (unsigned long *)&pmu->global_status); kvm_make_request(KVM_REQ_PMU, pmc->vcpu); /* * Inject PMI. If vcpu was in a guest mode during NMI PMI diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 7f4f9c2badae..ec8366c5cfea 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1338,21 +1338,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu) wrmsrl(host_save_user_msrs[i], svm->host_user_msrs[i]); } -static void svm_update_cpl(struct kvm_vcpu *vcpu) -{ - struct vcpu_svm *svm = to_svm(vcpu); - int cpl; - - if (!is_protmode(vcpu)) - cpl = 0; - else if (svm->vmcb->save.rflags & X86_EFLAGS_VM) - cpl = 3; - else - cpl = svm->vmcb->save.cs.selector & 0x3; - - svm->vmcb->save.cpl = cpl; -} - static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu) { return to_svm(vcpu)->vmcb->save.rflags; @@ -1360,11 +1345,12 @@ static unsigned long svm_get_rflags(struct kvm_vcpu *vcpu) static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags) { - unsigned long old_rflags = to_svm(vcpu)->vmcb->save.rflags; - + /* + * Any change of EFLAGS.VM is accompained by a reload of SS + * (caused by either a task switch or an inter-privilege IRET), + * so we do not need to update the CPL here. + */ to_svm(vcpu)->vmcb->save.rflags = rflags; - if ((old_rflags ^ rflags) & X86_EFLAGS_VM) - svm_update_cpl(vcpu); } static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg) @@ -1631,8 +1617,15 @@ static void svm_set_segment(struct kvm_vcpu *vcpu, s->attrib |= (var->db & 1) << SVM_SELECTOR_DB_SHIFT; s->attrib |= (var->g & 1) << SVM_SELECTOR_G_SHIFT; } - if (seg == VCPU_SREG_CS) - svm_update_cpl(vcpu); + + /* + * This is always accurate, except if SYSRET returned to a segment + * with SS.DPL != 3. Intel does not have this quirk, and always + * forces SS.DPL to 3 on sysret, so we ignore that case; fixing it + * would entail passing the CPL to userspace and back. + */ + if (seg == VCPU_SREG_SS) + svm->vmcb->save.cpl = (s->attrib >> SVM_SELECTOR_DPL_SHIFT) & 3; mark_dirty(svm->vmcb, VMCB_SEG); } @@ -2770,12 +2763,6 @@ static int xsetbv_interception(struct vcpu_svm *svm) return 1; } -static int invalid_op_interception(struct vcpu_svm *svm) -{ - kvm_queue_exception(&svm->vcpu, UD_VECTOR); - return 1; -} - static int task_switch_interception(struct vcpu_svm *svm) { u16 tss_selector; @@ -3287,6 +3274,24 @@ static int pause_interception(struct vcpu_svm *svm) return 1; } +static int nop_interception(struct vcpu_svm *svm) +{ + skip_emulated_instruction(&(svm->vcpu)); + return 1; +} + +static int monitor_interception(struct vcpu_svm *svm) +{ + printk_once(KERN_WARNING "kvm: MONITOR instruction emulated as NOP!\n"); + return nop_interception(svm); +} + +static int mwait_interception(struct vcpu_svm *svm) +{ + printk_once(KERN_WARNING "kvm: MWAIT instruction emulated as NOP!\n"); + return nop_interception(svm); +} + static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = { [SVM_EXIT_READ_CR0] = cr_interception, [SVM_EXIT_READ_CR3] = cr_interception, @@ -3344,8 +3349,8 @@ static int (*const svm_exit_handlers[])(struct vcpu_svm *svm) = { [SVM_EXIT_CLGI] = clgi_interception, [SVM_EXIT_SKINIT] = skinit_interception, [SVM_EXIT_WBINVD] = emulate_on_interception, - [SVM_EXIT_MONITOR] = invalid_op_interception, - [SVM_EXIT_MWAIT] = invalid_op_interception, + [SVM_EXIT_MONITOR] = monitor_interception, + [SVM_EXIT_MWAIT] = mwait_interception, [SVM_EXIT_XSETBV] = xsetbv_interception, [SVM_EXIT_NPF] = pf_interception, }; diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h index 545245d7cc63..33574c95220d 100644 --- a/arch/x86/kvm/trace.h +++ b/arch/x86/kvm/trace.h @@ -91,16 +91,21 @@ TRACE_EVENT(kvm_hv_hypercall, /* * Tracepoint for PIO. */ + +#define KVM_PIO_IN 0 +#define KVM_PIO_OUT 1 + TRACE_EVENT(kvm_pio, TP_PROTO(unsigned int rw, unsigned int port, unsigned int size, - unsigned int count), - TP_ARGS(rw, port, size, count), + unsigned int count, void *data), + TP_ARGS(rw, port, size, count, data), TP_STRUCT__entry( __field( unsigned int, rw ) __field( unsigned int, port ) __field( unsigned int, size ) __field( unsigned int, count ) + __field( unsigned int, val ) ), TP_fast_assign( @@ -108,11 +113,18 @@ TRACE_EVENT(kvm_pio, __entry->port = port; __entry->size = size; __entry->count = count; + if (size == 1) + __entry->val = *(unsigned char *)data; + else if (size == 2) + __entry->val = *(unsigned short *)data; + else + __entry->val = *(unsigned int *)data; ), - TP_printk("pio_%s at 0x%x size %d count %d", + TP_printk("pio_%s at 0x%x size %d count %d val 0x%x %s", __entry->rw ? "write" : "read", - __entry->port, __entry->size, __entry->count) + __entry->port, __entry->size, __entry->count, __entry->val, + __entry->count > 1 ? "(...)" : "") ); /* diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 33e8c028842f..801332edefc3 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -354,6 +354,7 @@ struct vmcs02_list { struct nested_vmx { /* Has the level1 guest done vmxon? */ bool vmxon; + gpa_t vmxon_ptr; /* The guest-physical address of the current VMCS L1 keeps for L2 */ gpa_t current_vmptr; @@ -413,7 +414,6 @@ struct vcpu_vmx { struct kvm_vcpu vcpu; unsigned long host_rsp; u8 fail; - u8 cpl; bool nmi_known_unmasked; u32 exit_intr_info; u32 idt_vectoring_info; @@ -2283,7 +2283,7 @@ static __init void nested_vmx_setup_ctls_msrs(void) rdmsr(MSR_IA32_VMX_EXIT_CTLS, nested_vmx_exit_ctls_low, nested_vmx_exit_ctls_high); nested_vmx_exit_ctls_low = VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR; - /* Note that guest use of VM_EXIT_ACK_INTR_ON_EXIT is not supported. */ + nested_vmx_exit_ctls_high &= #ifdef CONFIG_X86_64 VM_EXIT_HOST_ADDR_SPACE_SIZE | @@ -2291,7 +2291,8 @@ static __init void nested_vmx_setup_ctls_msrs(void) VM_EXIT_LOAD_IA32_PAT | VM_EXIT_SAVE_IA32_PAT; nested_vmx_exit_ctls_high |= VM_EXIT_ALWAYSON_WITHOUT_TRUE_MSR | VM_EXIT_LOAD_IA32_EFER | VM_EXIT_SAVE_IA32_EFER | - VM_EXIT_SAVE_VMX_PREEMPTION_TIMER; + VM_EXIT_SAVE_VMX_PREEMPTION_TIMER | VM_EXIT_ACK_INTR_ON_EXIT; + if (vmx_mpx_supported()) nested_vmx_exit_ctls_high |= VM_EXIT_CLEAR_BNDCFGS; @@ -2353,12 +2354,11 @@ static __init void nested_vmx_setup_ctls_msrs(void) VMX_EPT_INVEPT_BIT; nested_vmx_ept_caps &= vmx_capability.ept; /* - * Since invept is completely emulated we support both global - * and context invalidation independent of what host cpu - * supports + * For nested guests, we don't do anything specific + * for single context invalidation. Hence, only advertise + * support for global context invalidation. */ - nested_vmx_ept_caps |= VMX_EPT_EXTENT_GLOBAL_BIT | - VMX_EPT_EXTENT_CONTEXT_BIT; + nested_vmx_ept_caps |= VMX_EPT_EXTENT_GLOBAL_BIT; } else nested_vmx_ept_caps = 0; @@ -3186,10 +3186,6 @@ static void enter_pmode(struct kvm_vcpu *vcpu) fix_pmode_seg(vcpu, VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]); fix_pmode_seg(vcpu, VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]); fix_pmode_seg(vcpu, VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]); - - /* CPL is always 0 when CPU enters protected mode */ - __set_bit(VCPU_EXREG_CPL, (ulong *)&vcpu->arch.regs_avail); - vmx->cpl = 0; } static void fix_rmode_seg(int seg, struct kvm_segment *save) @@ -3591,22 +3587,14 @@ static int vmx_get_cpl(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); - if (!is_protmode(vcpu)) + if (unlikely(vmx->rmode.vm86_active)) return 0; - - if (!is_long_mode(vcpu) - && (kvm_get_rflags(vcpu) & X86_EFLAGS_VM)) /* if virtual 8086 */ - return 3; - - if (!test_bit(VCPU_EXREG_CPL, (ulong *)&vcpu->arch.regs_avail)) { - __set_bit(VCPU_EXREG_CPL, (ulong *)&vcpu->arch.regs_avail); - vmx->cpl = vmx_read_guest_seg_selector(vmx, VCPU_SREG_CS) & 3; + else { + int ar = vmx_read_guest_seg_ar(vmx, VCPU_SREG_SS); + return AR_DPL(ar); } - - return vmx->cpl; } - static u32 vmx_segment_access_rights(struct kvm_segment *var) { u32 ar; @@ -3634,8 +3622,6 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu, const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg]; vmx_segment_cache_clear(vmx); - if (seg == VCPU_SREG_CS) - __clear_bit(VCPU_EXREG_CPL, (ulong *)&vcpu->arch.regs_avail); if (vmx->rmode.vm86_active && seg != VCPU_SREG_LDTR) { vmx->rmode.segs[seg] = *var; @@ -4564,6 +4550,16 @@ static bool nested_exit_on_intr(struct kvm_vcpu *vcpu) PIN_BASED_EXT_INTR_MASK; } +/* + * In nested virtualization, check if L1 has set + * VM_EXIT_ACK_INTR_ON_EXIT + */ +static bool nested_exit_intr_ack_set(struct kvm_vcpu *vcpu) +{ + return get_vmcs12(vcpu)->vm_exit_controls & + VM_EXIT_ACK_INTR_ON_EXIT; +} + static bool nested_exit_on_nmi(struct kvm_vcpu *vcpu) { return get_vmcs12(vcpu)->pin_based_vm_exec_control & @@ -4878,6 +4874,9 @@ static int handle_exception(struct kvm_vcpu *vcpu) (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) { vcpu->arch.dr6 &= ~15; vcpu->arch.dr6 |= dr6; + if (!(dr6 & ~DR6_RESERVED)) /* icebp */ + skip_emulated_instruction(vcpu); + kvm_queue_exception(vcpu, DB_VECTOR); return 1; } @@ -5166,7 +5165,7 @@ static int handle_dr(struct kvm_vcpu *vcpu) return 1; kvm_register_write(vcpu, reg, val); } else - if (kvm_set_dr(vcpu, dr, vcpu->arch.regs[reg])) + if (kvm_set_dr(vcpu, dr, kvm_register_read(vcpu, reg))) return 1; skip_emulated_instruction(vcpu); @@ -5439,7 +5438,7 @@ static int handle_task_switch(struct kvm_vcpu *vcpu) } /* clear all local breakpoint enable flags */ - vmcs_writel(GUEST_DR7, vmcs_readl(GUEST_DR7) & ~55); + vmcs_writel(GUEST_DR7, vmcs_readl(GUEST_DR7) & ~0x55); /* * TODO: What about debug traps on tss switch? @@ -5565,6 +5564,10 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu) gpa_t gpa; gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS); + if (!kvm_io_bus_write(vcpu->kvm, KVM_FAST_MMIO_BUS, gpa, 0, NULL)) { + skip_emulated_instruction(vcpu); + return 1; + } ret = handle_mmio_page_fault_common(vcpu, gpa, true); if (likely(ret == RET_MMIO_PF_EMULATE)) @@ -5669,12 +5672,24 @@ static int handle_pause(struct kvm_vcpu *vcpu) return 1; } -static int handle_invalid_op(struct kvm_vcpu *vcpu) +static int handle_nop(struct kvm_vcpu *vcpu) { - kvm_queue_exception(vcpu, UD_VECTOR); + skip_emulated_instruction(vcpu); return 1; } +static int handle_mwait(struct kvm_vcpu *vcpu) +{ + printk_once(KERN_WARNING "kvm: MWAIT instruction emulated as NOP!\n"); + return handle_nop(vcpu); +} + +static int handle_monitor(struct kvm_vcpu *vcpu) +{ + printk_once(KERN_WARNING "kvm: MONITOR instruction emulated as NOP!\n"); + return handle_nop(vcpu); +} + /* * To run an L2 guest, we need a vmcs02 based on the L1-specified vmcs12. * We could reuse a single VMCS for all the L2 guests, but we also want the @@ -5812,6 +5827,154 @@ static enum hrtimer_restart vmx_preemption_timer_fn(struct hrtimer *timer) } /* + * Decode the memory-address operand of a vmx instruction, as recorded on an + * exit caused by such an instruction (run by a guest hypervisor). + * On success, returns 0. When the operand is invalid, returns 1 and throws + * #UD or #GP. + */ +static int get_vmx_mem_address(struct kvm_vcpu *vcpu, + unsigned long exit_qualification, + u32 vmx_instruction_info, gva_t *ret) +{ + /* + * According to Vol. 3B, "Information for VM Exits Due to Instruction + * Execution", on an exit, vmx_instruction_info holds most of the + * addressing components of the operand. Only the displacement part + * is put in exit_qualification (see 3B, "Basic VM-Exit Information"). + * For how an actual address is calculated from all these components, + * refer to Vol. 1, "Operand Addressing". + */ + int scaling = vmx_instruction_info & 3; + int addr_size = (vmx_instruction_info >> 7) & 7; + bool is_reg = vmx_instruction_info & (1u << 10); + int seg_reg = (vmx_instruction_info >> 15) & 7; + int index_reg = (vmx_instruction_info >> 18) & 0xf; + bool index_is_valid = !(vmx_instruction_info & (1u << 22)); + int base_reg = (vmx_instruction_info >> 23) & 0xf; + bool base_is_valid = !(vmx_instruction_info & (1u << 27)); + + if (is_reg) { + kvm_queue_exception(vcpu, UD_VECTOR); + return 1; + } + + /* Addr = segment_base + offset */ + /* offset = base + [index * scale] + displacement */ + *ret = vmx_get_segment_base(vcpu, seg_reg); + if (base_is_valid) + *ret += kvm_register_read(vcpu, base_reg); + if (index_is_valid) + *ret += kvm_register_read(vcpu, index_reg)<<scaling; + *ret += exit_qualification; /* holds the displacement */ + + if (addr_size == 1) /* 32 bit */ + *ret &= 0xffffffff; + + /* + * TODO: throw #GP (and return 1) in various cases that the VM* + * instructions require it - e.g., offset beyond segment limit, + * unusable or unreadable/unwritable segment, non-canonical 64-bit + * address, and so on. Currently these are not checked. + */ + return 0; +} + +/* + * This function performs the various checks including + * - if it's 4KB aligned + * - No bits beyond the physical address width are set + * - Returns 0 on success or else 1 + * (Intel SDM Section 30.3) + */ +static int nested_vmx_check_vmptr(struct kvm_vcpu *vcpu, int exit_reason, + gpa_t *vmpointer) +{ + gva_t gva; + gpa_t vmptr; + struct x86_exception e; + struct page *page; + struct vcpu_vmx *vmx = to_vmx(vcpu); + int maxphyaddr = cpuid_maxphyaddr(vcpu); + + if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION), + vmcs_read32(VMX_INSTRUCTION_INFO), &gva)) + return 1; + + if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr, + sizeof(vmptr), &e)) { + kvm_inject_page_fault(vcpu, &e); + return 1; + } + + switch (exit_reason) { + case EXIT_REASON_VMON: + /* + * SDM 3: 24.11.5 + * The first 4 bytes of VMXON region contain the supported + * VMCS revision identifier + * + * Note - IA32_VMX_BASIC[48] will never be 1 + * for the nested case; + * which replaces physical address width with 32 + * + */ + if (!IS_ALIGNED(vmptr, PAGE_SIZE) || (vmptr >> maxphyaddr)) { + nested_vmx_failInvalid(vcpu); + skip_emulated_instruction(vcpu); + return 1; + } + + page = nested_get_page(vcpu, vmptr); + if (page == NULL || + *(u32 *)kmap(page) != VMCS12_REVISION) { + nested_vmx_failInvalid(vcpu); + kunmap(page); + skip_emulated_instruction(vcpu); + return 1; + } + kunmap(page); + vmx->nested.vmxon_ptr = vmptr; + break; + case EXIT_REASON_VMCLEAR: + if (!IS_ALIGNED(vmptr, PAGE_SIZE) || (vmptr >> maxphyaddr)) { + nested_vmx_failValid(vcpu, + VMXERR_VMCLEAR_INVALID_ADDRESS); + skip_emulated_instruction(vcpu); + return 1; + } + + if (vmptr == vmx->nested.vmxon_ptr) { + nested_vmx_failValid(vcpu, + VMXERR_VMCLEAR_VMXON_POINTER); + skip_emulated_instruction(vcpu); + return 1; + } + break; + case EXIT_REASON_VMPTRLD: + if (!IS_ALIGNED(vmptr, PAGE_SIZE) || (vmptr >> maxphyaddr)) { + nested_vmx_failValid(vcpu, + VMXERR_VMPTRLD_INVALID_ADDRESS); + skip_emulated_instruction(vcpu); + return 1; + } + + if (vmptr == vmx->nested.vmxon_ptr) { + nested_vmx_failValid(vcpu, + VMXERR_VMCLEAR_VMXON_POINTER); + skip_emulated_instruction(vcpu); + return 1; + } + break; + default: + return 1; /* shouldn't happen */ + } + + if (vmpointer) + *vmpointer = vmptr; + return 0; +} + +/* * Emulate the VMXON instruction. * Currently, we just remember that VMX is active, and do not save or even * inspect the argument to VMXON (the so-called "VMXON pointer") because we @@ -5849,6 +6012,10 @@ static int handle_vmon(struct kvm_vcpu *vcpu) kvm_inject_gp(vcpu, 0); return 1; } + + if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMON, NULL)) + return 1; + if (vmx->nested.vmxon) { nested_vmx_failValid(vcpu, VMXERR_VMXON_IN_VMX_ROOT_OPERATION); skip_emulated_instruction(vcpu); @@ -5971,87 +6138,19 @@ static int handle_vmoff(struct kvm_vcpu *vcpu) return 1; } -/* - * Decode the memory-address operand of a vmx instruction, as recorded on an - * exit caused by such an instruction (run by a guest hypervisor). - * On success, returns 0. When the operand is invalid, returns 1 and throws - * #UD or #GP. - */ -static int get_vmx_mem_address(struct kvm_vcpu *vcpu, - unsigned long exit_qualification, - u32 vmx_instruction_info, gva_t *ret) -{ - /* - * According to Vol. 3B, "Information for VM Exits Due to Instruction - * Execution", on an exit, vmx_instruction_info holds most of the - * addressing components of the operand. Only the displacement part - * is put in exit_qualification (see 3B, "Basic VM-Exit Information"). - * For how an actual address is calculated from all these components, - * refer to Vol. 1, "Operand Addressing". - */ - int scaling = vmx_instruction_info & 3; - int addr_size = (vmx_instruction_info >> 7) & 7; - bool is_reg = vmx_instruction_info & (1u << 10); - int seg_reg = (vmx_instruction_info >> 15) & 7; - int index_reg = (vmx_instruction_info >> 18) & 0xf; - bool index_is_valid = !(vmx_instruction_info & (1u << 22)); - int base_reg = (vmx_instruction_info >> 23) & 0xf; - bool base_is_valid = !(vmx_instruction_info & (1u << 27)); - - if (is_reg) { - kvm_queue_exception(vcpu, UD_VECTOR); - return 1; - } - - /* Addr = segment_base + offset */ - /* offset = base + [index * scale] + displacement */ - *ret = vmx_get_segment_base(vcpu, seg_reg); - if (base_is_valid) - *ret += kvm_register_read(vcpu, base_reg); - if (index_is_valid) - *ret += kvm_register_read(vcpu, index_reg)<<scaling; - *ret += exit_qualification; /* holds the displacement */ - - if (addr_size == 1) /* 32 bit */ - *ret &= 0xffffffff; - - /* - * TODO: throw #GP (and return 1) in various cases that the VM* - * instructions require it - e.g., offset beyond segment limit, - * unusable or unreadable/unwritable segment, non-canonical 64-bit - * address, and so on. Currently these are not checked. - */ - return 0; -} - /* Emulate the VMCLEAR instruction */ static int handle_vmclear(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); - gva_t gva; gpa_t vmptr; struct vmcs12 *vmcs12; struct page *page; - struct x86_exception e; if (!nested_vmx_check_permission(vcpu)) return 1; - if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION), - vmcs_read32(VMX_INSTRUCTION_INFO), &gva)) - return 1; - - if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr, - sizeof(vmptr), &e)) { - kvm_inject_page_fault(vcpu, &e); - return 1; - } - - if (!IS_ALIGNED(vmptr, PAGE_SIZE)) { - nested_vmx_failValid(vcpu, VMXERR_VMCLEAR_INVALID_ADDRESS); - skip_emulated_instruction(vcpu); + if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMCLEAR, &vmptr)) return 1; - } if (vmptr == vmx->nested.current_vmptr) { nested_release_vmcs12(vmx); @@ -6372,29 +6471,14 @@ static int handle_vmwrite(struct kvm_vcpu *vcpu) static int handle_vmptrld(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); - gva_t gva; gpa_t vmptr; - struct x86_exception e; u32 exec_control; if (!nested_vmx_check_permission(vcpu)) return 1; - if (get_vmx_mem_address(vcpu, vmcs_readl(EXIT_QUALIFICATION), - vmcs_read32(VMX_INSTRUCTION_INFO), &gva)) - return 1; - - if (kvm_read_guest_virt(&vcpu->arch.emulate_ctxt, gva, &vmptr, - sizeof(vmptr), &e)) { - kvm_inject_page_fault(vcpu, &e); - return 1; - } - - if (!IS_ALIGNED(vmptr, PAGE_SIZE)) { - nested_vmx_failValid(vcpu, VMXERR_VMPTRLD_INVALID_ADDRESS); - skip_emulated_instruction(vcpu); + if (nested_vmx_check_vmptr(vcpu, EXIT_REASON_VMPTRLD, &vmptr)) return 1; - } if (vmx->nested.current_vmptr != vmptr) { struct vmcs12 *new_vmcs12; @@ -6471,7 +6555,6 @@ static int handle_invept(struct kvm_vcpu *vcpu) struct { u64 eptp, gpa; } operand; - u64 eptp_mask = ((1ull << 51) - 1) & PAGE_MASK; if (!(nested_vmx_secondary_ctls_high & SECONDARY_EXEC_ENABLE_EPT) || !(nested_vmx_ept_caps & VMX_EPT_INVEPT_BIT)) { @@ -6511,16 +6594,13 @@ static int handle_invept(struct kvm_vcpu *vcpu) } switch (type) { - case VMX_EPT_EXTENT_CONTEXT: - if ((operand.eptp & eptp_mask) != - (nested_ept_get_cr3(vcpu) & eptp_mask)) - break; case VMX_EPT_EXTENT_GLOBAL: kvm_mmu_sync_roots(vcpu); kvm_mmu_flush_tlb(vcpu); nested_vmx_succeed(vcpu); break; default: + /* Trap single context invalidation invept calls */ BUG_ON(1); break; } @@ -6571,8 +6651,8 @@ static int (*const kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu) = { [EXIT_REASON_EPT_VIOLATION] = handle_ept_violation, [EXIT_REASON_EPT_MISCONFIG] = handle_ept_misconfig, [EXIT_REASON_PAUSE_INSTRUCTION] = handle_pause, - [EXIT_REASON_MWAIT_INSTRUCTION] = handle_invalid_op, - [EXIT_REASON_MONITOR_INSTRUCTION] = handle_invalid_op, + [EXIT_REASON_MWAIT_INSTRUCTION] = handle_mwait, + [EXIT_REASON_MONITOR_INSTRUCTION] = handle_monitor, [EXIT_REASON_INVEPT] = handle_invept, }; @@ -7413,7 +7493,6 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu) vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP) | (1 << VCPU_EXREG_RFLAGS) - | (1 << VCPU_EXREG_CPL) | (1 << VCPU_EXREG_PDPTR) | (1 << VCPU_EXREG_SEGMENTS) | (1 << VCPU_EXREG_CR3)); @@ -7778,7 +7857,8 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) exec_control = vmcs12->pin_based_vm_exec_control; exec_control |= vmcs_config.pin_based_exec_ctrl; - exec_control &= ~PIN_BASED_VMX_PREEMPTION_TIMER; + exec_control &= ~(PIN_BASED_VMX_PREEMPTION_TIMER | + PIN_BASED_POSTED_INTR); vmcs_write32(PIN_BASED_VM_EXEC_CONTROL, exec_control); vmx->nested.preemption_timer_expired = false; @@ -7815,7 +7895,9 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) if (!vmx->rdtscp_enabled) exec_control &= ~SECONDARY_EXEC_RDTSCP; /* Take the following fields only from vmcs12 */ - exec_control &= ~SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES; + exec_control &= ~(SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES | + SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY | + SECONDARY_EXEC_APIC_REGISTER_VIRT); if (nested_cpu_has(vmcs12, CPU_BASED_ACTIVATE_SECONDARY_CONTROLS)) exec_control |= vmcs12->secondary_vm_exec_control; @@ -8598,6 +8680,14 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason, prepare_vmcs12(vcpu, vmcs12, exit_reason, exit_intr_info, exit_qualification); + if ((exit_reason == EXIT_REASON_EXTERNAL_INTERRUPT) + && nested_exit_intr_ack_set(vcpu)) { + int irq = kvm_cpu_get_interrupt(vcpu); + WARN_ON(irq < 0); + vmcs12->vm_exit_intr_info = irq | + INTR_INFO_VALID_MASK | INTR_TYPE_EXT_INTR; + } + trace_kvm_nested_vmexit_inject(vmcs12->vm_exit_reason, vmcs12->exit_qualification, vmcs12->idt_vectoring_info_field, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b6c0bacca9bd..f32a02578c0d 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -106,6 +106,8 @@ EXPORT_SYMBOL_GPL(kvm_max_guest_tsc_khz); static u32 tsc_tolerance_ppm = 250; module_param(tsc_tolerance_ppm, uint, S_IRUGO | S_IWUSR); +static bool backwards_tsc_observed = false; + #define KVM_NR_SHARED_MSRS 16 struct kvm_shared_msrs_global { @@ -702,25 +704,11 @@ int kvm_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3) } if (is_long_mode(vcpu)) { - if (kvm_read_cr4_bits(vcpu, X86_CR4_PCIDE)) { - if (cr3 & CR3_PCID_ENABLED_RESERVED_BITS) - return 1; - } else - if (cr3 & CR3_L_MODE_RESERVED_BITS) - return 1; - } else { - if (is_pae(vcpu)) { - if (cr3 & CR3_PAE_RESERVED_BITS) - return 1; - if (is_paging(vcpu) && - !load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3)) - return 1; - } - /* - * We don't check reserved bits in nonpae mode, because - * this isn't enforced, and VMware depends on this. - */ - } + if (cr3 & CR3_L_MODE_RESERVED_BITS) + return 1; + } else if (is_pae(vcpu) && is_paging(vcpu) && + !load_pdptrs(vcpu, vcpu->arch.walk_mmu, cr3)) + return 1; vcpu->arch.cr3 = cr3; __set_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail); @@ -1486,7 +1474,8 @@ static void pvclock_update_vm_gtod_copy(struct kvm *kvm) &ka->master_kernel_ns, &ka->master_cycle_now); - ka->use_master_clock = host_tsc_clocksource & vcpus_matched; + ka->use_master_clock = host_tsc_clocksource && vcpus_matched + && !backwards_tsc_observed; if (ka->use_master_clock) atomic_set(&kvm_guest_has_master_clock, 1); @@ -1932,6 +1921,8 @@ static int set_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 data) if (!(data & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE)) { vcpu->arch.hv_vapic = data; + if (kvm_lapic_enable_pv_eoi(vcpu, 0)) + return 1; break; } gfn = data >> HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT; @@ -1942,6 +1933,8 @@ static int set_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 data) return 1; vcpu->arch.hv_vapic = data; mark_page_dirty(vcpu->kvm, gfn); + if (kvm_lapic_enable_pv_eoi(vcpu, gfn_to_gpa(gfn) | KVM_MSR_ENABLED)) + return 1; break; } case HV_X64_MSR_EOI: @@ -2644,6 +2637,7 @@ int kvm_dev_ioctl_check_extension(long ext) case KVM_CAP_IRQ_INJECT_STATUS: case KVM_CAP_IRQFD: case KVM_CAP_IOEVENTFD: + case KVM_CAP_IOEVENTFD_NO_LENGTH: case KVM_CAP_PIT2: case KVM_CAP_PIT_STATE2: case KVM_CAP_SET_IDENTITY_MAP_ADDR: @@ -3646,11 +3640,19 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) offset = i * BITS_PER_LONG; kvm_mmu_write_protect_pt_masked(kvm, memslot, offset, mask); } - if (is_dirty) - kvm_flush_remote_tlbs(kvm); spin_unlock(&kvm->mmu_lock); + /* See the comments in kvm_mmu_slot_remove_write_access(). */ + lockdep_assert_held(&kvm->slots_lock); + + /* + * All the TLBs can be flushed out of mmu lock, see the comments in + * kvm_mmu_slot_remove_write_access(). + */ + if (is_dirty) + kvm_flush_remote_tlbs(kvm); + r = -EFAULT; if (copy_to_user(log->dirty_bitmap, dirty_bitmap_buffer, n)) goto out; @@ -4486,8 +4488,6 @@ static int emulator_pio_in_out(struct kvm_vcpu *vcpu, int size, unsigned short port, void *val, unsigned int count, bool in) { - trace_kvm_pio(!in, port, size, count); - vcpu->arch.pio.port = port; vcpu->arch.pio.in = in; vcpu->arch.pio.count = count; @@ -4522,6 +4522,7 @@ static int emulator_pio_in_emulated(struct x86_emulate_ctxt *ctxt, if (ret) { data_avail: memcpy(val, vcpu->arch.pio_data, size * count); + trace_kvm_pio(KVM_PIO_IN, port, size, count, vcpu->arch.pio_data); vcpu->arch.pio.count = 0; return 1; } @@ -4536,6 +4537,7 @@ static int emulator_pio_out_emulated(struct x86_emulate_ctxt *ctxt, struct kvm_vcpu *vcpu = emul_to_vcpu(ctxt); memcpy(vcpu->arch.pio_data, val, size * count); + trace_kvm_pio(KVM_PIO_OUT, port, size, count, vcpu->arch.pio_data); return emulator_pio_in_out(vcpu, size, port, (void *)val, count, false); } @@ -4647,11 +4649,6 @@ static int emulator_set_cr(struct x86_emulate_ctxt *ctxt, int cr, ulong val) return res; } -static void emulator_set_rflags(struct x86_emulate_ctxt *ctxt, ulong val) -{ - kvm_set_rflags(emul_to_vcpu(ctxt), val); -} - static int emulator_get_cpl(struct x86_emulate_ctxt *ctxt) { return kvm_x86_ops->get_cpl(emul_to_vcpu(ctxt)); @@ -4836,7 +4833,6 @@ static const struct x86_emulate_ops emulate_ops = { .set_idt = emulator_set_idt, .get_cr = emulator_get_cr, .set_cr = emulator_set_cr, - .set_rflags = emulator_set_rflags, .cpl = emulator_get_cpl, .get_dr = emulator_get_dr, .set_dr = emulator_set_dr, @@ -4902,7 +4898,7 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu) ctxt->eip = kvm_rip_read(vcpu); ctxt->mode = (!is_protmode(vcpu)) ? X86EMUL_MODE_REAL : (ctxt->eflags & X86_EFLAGS_VM) ? X86EMUL_MODE_VM86 : - cs_l ? X86EMUL_MODE_PROT64 : + (cs_l && is_long_mode(vcpu)) ? X86EMUL_MODE_PROT64 : cs_db ? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16; ctxt->guest_mode = is_guest_mode(vcpu); @@ -6945,6 +6941,7 @@ int kvm_arch_hardware_enable(void *garbage) */ if (backwards_tsc) { u64 delta_cyc = max_tsc - local_tsc; + backwards_tsc_observed = true; list_for_each_entry(kvm, &vm_list, vm_list) { kvm_for_each_vcpu(i, vcpu, kvm) { vcpu->arch.tsc_offset_adjustment += delta_cyc; @@ -7329,8 +7326,12 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, kvm_mmu_change_mmu_pages(kvm, nr_mmu_pages); /* * Write protect all pages for dirty logging. - * Existing largepage mappings are destroyed here and new ones will - * not be created until the end of the logging. + * + * All the sptes including the large sptes which point to this + * slot are set to readonly. We can not create any new large + * spte on this slot until the end of the logging. + * + * See the comments in fast_page_fault(). */ if ((change != KVM_MR_DELETE) && (mem->flags & KVM_MEM_LOG_DIRTY_PAGES)) kvm_mmu_slot_remove_write_access(kvm, mem->slot); diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index eabcb6e6a900..4d4f96a27638 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -16,7 +16,7 @@ clean-files := inat-tables.c obj-$(CONFIG_SMP) += msr-smp.o cache-smp.o -lib-y := delay.o misc.o +lib-y := delay.o misc.o cmdline.o lib-y += thunk_$(BITS).o lib-y += usercopy_$(BITS).o usercopy.o getuser.o putuser.o lib-y += memcpy_$(BITS).o diff --git a/arch/x86/lib/cmdline.c b/arch/x86/lib/cmdline.c new file mode 100644 index 000000000000..422db000d727 --- /dev/null +++ b/arch/x86/lib/cmdline.c @@ -0,0 +1,84 @@ +/* + * This file is part of the Linux kernel, and is made available under + * the terms of the GNU General Public License version 2. + * + * Misc librarized functions for cmdline poking. + */ +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/ctype.h> +#include <asm/setup.h> + +static inline int myisspace(u8 c) +{ + return c <= ' '; /* Close enough approximation */ +} + +/** + * Find a boolean option (like quiet,noapic,nosmp....) + * + * @cmdline: the cmdline string + * @option: option string to look for + * + * Returns the position of that @option (starts counting with 1) + * or 0 on not found. + */ +int cmdline_find_option_bool(const char *cmdline, const char *option) +{ + char c; + int len, pos = 0, wstart = 0; + const char *opptr = NULL; + enum { + st_wordstart = 0, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + } state = st_wordstart; + + if (!cmdline) + return -1; /* No command line */ + + len = min_t(int, strlen(cmdline), COMMAND_LINE_SIZE); + if (!len) + return 0; + + while (len--) { + c = *(char *)cmdline++; + pos++; + + switch (state) { + case st_wordstart: + if (!c) + return 0; + else if (myisspace(c)) + break; + + state = st_wordcmp; + opptr = option; + wstart = pos; + /* fall through */ + + case st_wordcmp: + if (!*opptr) + if (!c || myisspace(c)) + return wstart; + else + state = st_wordskip; + else if (!c) + return 0; + else if (c != *opptr++) + state = st_wordskip; + else if (!len) /* last word and is matching */ + return wstart; + break; + + case st_wordskip: + if (!c) + return 0; + else if (myisspace(c)) + state = st_wordstart; + break; + } + } + + return 0; /* Buffer overrun */ +} diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c index 20621d753d5f..167ffcac16ed 100644 --- a/arch/x86/mm/dump_pagetables.c +++ b/arch/x86/mm/dump_pagetables.c @@ -30,12 +30,14 @@ struct pg_state { unsigned long start_address; unsigned long current_address; const struct addr_marker *marker; + unsigned long lines; bool to_dmesg; }; struct addr_marker { unsigned long start_address; const char *name; + unsigned long max_lines; }; /* indices for address_markers; keep sync'd w/ address_markers below */ @@ -46,6 +48,7 @@ enum address_markers_idx { LOW_KERNEL_NR, VMALLOC_START_NR, VMEMMAP_START_NR, + ESPFIX_START_NR, HIGH_KERNEL_NR, MODULES_VADDR_NR, MODULES_END_NR, @@ -68,6 +71,7 @@ static struct addr_marker address_markers[] = { { PAGE_OFFSET, "Low Kernel Mapping" }, { VMALLOC_START, "vmalloc() Area" }, { VMEMMAP_START, "Vmemmap" }, + { ESPFIX_BASE_ADDR, "ESPfix Area", 16 }, { __START_KERNEL_map, "High Kernel Mapping" }, { MODULES_VADDR, "Modules" }, { MODULES_END, "End Modules" }, @@ -182,7 +186,7 @@ static void note_page(struct seq_file *m, struct pg_state *st, pgprot_t new_prot, int level) { pgprotval_t prot, cur; - static const char units[] = "KMGTPE"; + static const char units[] = "BKMGTPE"; /* * If we have a "break" in the series, we need to flush the state that @@ -197,6 +201,7 @@ static void note_page(struct seq_file *m, struct pg_state *st, st->current_prot = new_prot; st->level = level; st->marker = address_markers; + st->lines = 0; pt_dump_seq_printf(m, st->to_dmesg, "---[ %s ]---\n", st->marker->name); } else if (prot != cur || level != st->level || @@ -208,17 +213,24 @@ static void note_page(struct seq_file *m, struct pg_state *st, /* * Now print the actual finished series */ - pt_dump_seq_printf(m, st->to_dmesg, "0x%0*lx-0x%0*lx ", - width, st->start_address, - width, st->current_address); - - delta = (st->current_address - st->start_address) >> 10; - while (!(delta & 1023) && unit[1]) { - delta >>= 10; - unit++; + if (!st->marker->max_lines || + st->lines < st->marker->max_lines) { + pt_dump_seq_printf(m, st->to_dmesg, + "0x%0*lx-0x%0*lx ", + width, st->start_address, + width, st->current_address); + + delta = st->current_address - st->start_address; + while (!(delta & 1023) && unit[1]) { + delta >>= 10; + unit++; + } + pt_dump_cont_printf(m, st->to_dmesg, "%9lu%c ", + delta, *unit); + printk_prot(m, st->current_prot, st->level, + st->to_dmesg); } - pt_dump_cont_printf(m, st->to_dmesg, "%9lu%c ", delta, *unit); - printk_prot(m, st->current_prot, st->level, st->to_dmesg); + st->lines++; /* * We print markers for special areas of address space, @@ -226,7 +238,17 @@ static void note_page(struct seq_file *m, struct pg_state *st, * This helps in the interpretation. */ if (st->current_address >= st->marker[1].start_address) { + if (st->marker->max_lines && + st->lines > st->marker->max_lines) { + unsigned long nskip = + st->lines - st->marker->max_lines; + pt_dump_seq_printf(m, st->to_dmesg, + "... %lu entr%s skipped ... \n", + nskip, + nskip == 1 ? "y" : "ies"); + } st->marker++; + st->lines = 0; pt_dump_seq_printf(m, st->to_dmesg, "---[ %s ]---\n", st->marker->name); } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 8e5722992677..858b47b5221b 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -18,7 +18,8 @@ #include <asm/traps.h> /* dotraplinkage, ... */ #include <asm/pgalloc.h> /* pgd_*(), ... */ #include <asm/kmemcheck.h> /* kmemcheck_*(), ... */ -#include <asm/fixmap.h> /* VSYSCALL_START */ +#include <asm/fixmap.h> /* VSYSCALL_ADDR */ +#include <asm/vsyscall.h> /* emulate_vsyscall */ #define CREATE_TRACE_POINTS #include <asm/trace/exceptions.h> @@ -771,7 +772,7 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code, * emulation. */ if (unlikely((error_code & PF_INSTR) && - ((address & ~0xfff) == VSYSCALL_START))) { + ((address & ~0xfff) == VSYSCALL_ADDR))) { if (emulate_vsyscall(regs, address)) return; } diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index 8c9f647ff9e1..8b977ebf9388 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -58,11 +58,6 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, { return NULL; } - -int pmd_huge_support(void) -{ - return 0; -} #else struct page * @@ -80,11 +75,6 @@ int pud_huge(pud_t pud) { return !!(pud_val(pud) & _PAGE_PSE); } - -int pmd_huge_support(void) -{ - return 1; -} #endif #ifdef CONFIG_HUGETLB_PAGE diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index f35c66c5959a..df1a9927ad29 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -1055,8 +1055,8 @@ void __init mem_init(void) after_bootmem = 1; /* Register memory areas for /proc/kcore */ - kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START, - VSYSCALL_END - VSYSCALL_START, KCORE_OTHER); + kclist_add(&kcore_vsyscall, (void *)VSYSCALL_ADDR, + PAGE_SIZE, KCORE_OTHER); mem_init_print_info(NULL); } @@ -1185,11 +1185,19 @@ int kern_addr_valid(unsigned long addr) * covers the 64bit vsyscall page now. 32bit has a real VMA now and does * not need special handling anymore: */ +static const char *gate_vma_name(struct vm_area_struct *vma) +{ + return "[vsyscall]"; +} +static struct vm_operations_struct gate_vma_ops = { + .name = gate_vma_name, +}; static struct vm_area_struct gate_vma = { - .vm_start = VSYSCALL_START, - .vm_end = VSYSCALL_START + (VSYSCALL_MAPPED_PAGES * PAGE_SIZE), + .vm_start = VSYSCALL_ADDR, + .vm_end = VSYSCALL_ADDR + PAGE_SIZE, .vm_page_prot = PAGE_READONLY_EXEC, - .vm_flags = VM_READ | VM_EXEC + .vm_flags = VM_READ | VM_EXEC, + .vm_ops = &gate_vma_ops, }; struct vm_area_struct *get_gate_vma(struct mm_struct *mm) @@ -1218,29 +1226,46 @@ int in_gate_area(struct mm_struct *mm, unsigned long addr) */ int in_gate_area_no_mm(unsigned long addr) { - return (addr >= VSYSCALL_START) && (addr < VSYSCALL_END); + return (addr & PAGE_MASK) == VSYSCALL_ADDR; } -const char *arch_vma_name(struct vm_area_struct *vma) +static unsigned long probe_memory_block_size(void) { - if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) - return "[vdso]"; - if (vma == &gate_vma) - return "[vsyscall]"; - return NULL; -} + /* start from 2g */ + unsigned long bz = 1UL<<31; #ifdef CONFIG_X86_UV -unsigned long memory_block_size_bytes(void) -{ if (is_uv_system()) { printk(KERN_INFO "UV: memory block size 2GB\n"); return 2UL * 1024 * 1024 * 1024; } - return MIN_MEMORY_BLOCK_SIZE; -} #endif + /* less than 64g installed */ + if ((max_pfn << PAGE_SHIFT) < (16UL << 32)) + return MIN_MEMORY_BLOCK_SIZE; + + /* get the tail size */ + while (bz > MIN_MEMORY_BLOCK_SIZE) { + if (!((max_pfn << PAGE_SHIFT) & (bz - 1))) + break; + bz >>= 1; + } + + printk(KERN_DEBUG "memory block size : %ldMB\n", bz >> 20); + + return bz; +} + +static unsigned long memory_block_size_probed; +unsigned long memory_block_size_bytes(void) +{ + if (!memory_block_size_probed) + memory_block_size_probed = probe_memory_block_size(); + + return memory_block_size_probed; +} + #ifdef CONFIG_SPARSEMEM_VMEMMAP /* * Initialise the sparsemem vmemmap using huge-pages at the PMD level. diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 597ac155c91c..baff1da354e0 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -50,6 +50,21 @@ int ioremap_change_attr(unsigned long vaddr, unsigned long size, return err; } +static int __ioremap_check_ram(unsigned long start_pfn, unsigned long nr_pages, + void *arg) +{ + unsigned long i; + + for (i = 0; i < nr_pages; ++i) + if (pfn_valid(start_pfn + i) && + !PageReserved(pfn_to_page(start_pfn + i))) + return 1; + + WARN_ONCE(1, "ioremap on RAM pfn 0x%lx\n", start_pfn); + + return 0; +} + /* * Remap an arbitrary physical address space into the kernel virtual * address space. Needed when the kernel wants to access high addresses @@ -93,14 +108,11 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, /* * Don't allow anybody to remap normal RAM that we're using.. */ + pfn = phys_addr >> PAGE_SHIFT; last_pfn = last_addr >> PAGE_SHIFT; - for (pfn = phys_addr >> PAGE_SHIFT; pfn <= last_pfn; pfn++) { - int is_ram = page_is_ram(pfn); - - if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn))) - return NULL; - WARN_ON_ONCE(is_ram); - } + if (walk_system_ram_range(pfn, last_pfn - pfn + 1, NULL, + __ioremap_check_ram) == 1) + return NULL; /* * Mappings have to be page-aligned @@ -355,6 +367,12 @@ void __init early_ioremap_init(void) { pmd_t *pmd; +#ifdef CONFIG_X86_64 + BUILD_BUG_ON((fix_to_virt(0) + PAGE_SIZE) & ((1 << PMD_SHIFT) - 1)); +#else + WARN_ON((fix_to_virt(0) + PAGE_SIZE) & ((1 << PMD_SHIFT) - 1)); +#endif + early_ioremap_setup(); pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)); diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 1d045f9c390f..a32b706c401a 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -559,7 +559,7 @@ static void __init numa_clear_kernel_node_hotplug(void) int i, nid; nodemask_t numa_kernel_nodes = NODE_MASK_NONE; unsigned long start, end; - struct memblock_type *type = &memblock.reserved; + struct memblock_region *r; /* * At this time, all memory regions reserved by memblock are @@ -573,8 +573,8 @@ static void __init numa_clear_kernel_node_hotplug(void) } /* Mark all kernel nodes. */ - for (i = 0; i < type->cnt; i++) - node_set(type->regions[i].nid, numa_kernel_nodes); + for_each_memblock(reserved, r) + node_set(r->nid, numa_kernel_nodes); /* Clear MEMBLOCK_HOTPLUG flag for memory in kernel nodes. */ for (i = 0; i < numa_meminfo.nr_blks; i++) { diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c index 461bc8289024..6629f397b467 100644 --- a/arch/x86/mm/pageattr-test.c +++ b/arch/x86/mm/pageattr-test.c @@ -35,7 +35,7 @@ enum { static int pte_testbit(pte_t pte) { - return pte_flags(pte) & _PAGE_UNUSED1; + return pte_flags(pte) & _PAGE_SOFTW1; } struct split_state { diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c index c96314abd144..6fb6927f9e76 100644 --- a/arch/x86/mm/pgtable.c +++ b/arch/x86/mm/pgtable.c @@ -399,13 +399,20 @@ int pmdp_test_and_clear_young(struct vm_area_struct *vma, int ptep_clear_flush_young(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { - int young; - - young = ptep_test_and_clear_young(vma, address, ptep); - if (young) - flush_tlb_page(vma, address); - - return young; + /* + * On x86 CPUs, clearing the accessed bit without a TLB flush + * doesn't cause data corruption. [ It could cause incorrect + * page aging and the (mistaken) reclaim of hot pages, but the + * chance of that should be relatively low. ] + * + * So as a performance optimization don't flush the TLB when + * clearing the accessed bit, it will eventually be flushed by + * a context switch or a VM operation anyway. [ In the rare + * event of it not getting flushed for a long time the delay + * shouldn't really matter because there's no real memory + * pressure for swapout to react to. ] + */ + return ptep_test_and_clear_young(vma, address, ptep); } #ifdef CONFIG_TRANSPARENT_HUGEPAGE @@ -449,9 +456,9 @@ void __init reserve_top_address(unsigned long reserve) { #ifdef CONFIG_X86_32 BUG_ON(fixmaps_set > 0); - printk(KERN_INFO "Reserving virtual address space above 0x%08x\n", - (int)-reserve); - __FIXADDR_TOP = -reserve - PAGE_SIZE; + __FIXADDR_TOP = round_down(-reserve, 1 << PMD_SHIFT) - PAGE_SIZE; + printk(KERN_INFO "Reserving virtual address space above 0x%08lx (rounded to 0x%08lx)\n", + -reserve, __FIXADDR_TOP + PAGE_SIZE); #endif } diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index dc017735bb91..6d5663a599a7 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -171,7 +171,7 @@ static struct bpf_binary_header *bpf_alloc_binary(unsigned int proglen, memset(header, 0xcc, sz); /* fill whole space with int3 instructions */ header->pages = sz / PAGE_SIZE; - hole = sz - (proglen + sizeof(*header)); + hole = min(sz - (proglen + sizeof(*header)), PAGE_SIZE - sizeof(*header)); /* insert a random number of int3 instructions before BPF code */ *image_ptr = &header->image[prandom_u32() % hole]; diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 01edac6c5e18..5075371ab593 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -489,8 +489,12 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) } node = acpi_get_node(device->handle); - if (node == NUMA_NO_NODE) + if (node == NUMA_NO_NODE) { node = x86_pci_root_bus_node(busnum); + if (node != 0 && node != NUMA_NO_NODE) + dev_info(&device->dev, FW_BUG "no _PXM; falling back to node %d from hardware (may be inconsistent with ACPI node numbers)\n", + node); + } if (node != NUMA_NO_NODE && !node_online(node)) node = NUMA_NO_NODE; diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index e88f4c53d7f6..c20d2cc7ef64 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -11,27 +11,33 @@ #include "bus_numa.h" -/* - * This discovers the pcibus <-> node mapping on AMD K8. - * also get peer root bus resource for io,mmio - */ +#define AMD_NB_F0_NODE_ID 0x60 +#define AMD_NB_F0_UNIT_ID 0x64 +#define AMD_NB_F1_CONFIG_MAP_REG 0xe0 + +#define RANGE_NUM 16 +#define AMD_NB_F1_CONFIG_MAP_RANGES 4 -struct pci_hostbridge_probe { +struct amd_hostbridge { u32 bus; u32 slot; - u32 vendor; u32 device; }; -static struct pci_hostbridge_probe pci_probes[] __initdata = { - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1100 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, - { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1300 }, +/* + * IMPORTANT NOTE: + * hb_probes[] and early_root_info_init() is in maintenance mode. + * It only supports K8, Fam10h, Fam11h, and Fam15h_00h-0fh . + * Future processor will rely on information in ACPI. + */ +static struct amd_hostbridge hb_probes[] __initdata = { + { 0, 0x18, 0x1100 }, /* K8 */ + { 0, 0x18, 0x1200 }, /* Family10h */ + { 0xff, 0, 0x1200 }, /* Family10h */ + { 0, 0x18, 0x1300 }, /* Family11h */ + { 0, 0x18, 0x1600 }, /* Family15h */ }; -#define RANGE_NUM 16 - static struct pci_root_info __init *find_pci_root_info(int node, int link) { struct pci_root_info *info; @@ -45,12 +51,12 @@ static struct pci_root_info __init *find_pci_root_info(int node, int link) } /** - * early_fill_mp_bus_to_node() + * early_root_info_init() * called before pcibios_scan_root and pci_scan_bus - * fills the mp_bus_to_cpumask array based according to the LDT Bus Number - * Registers found in the K8 northbridge + * fills the mp_bus_to_cpumask array based according + * to the LDT Bus Number Registers found in the northbridge. */ -static int __init early_fill_mp_bus_info(void) +static int __init early_root_info_init(void) { int i; unsigned bus; @@ -75,19 +81,21 @@ static int __init early_fill_mp_bus_info(void) return -1; found = false; - for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + for (i = 0; i < ARRAY_SIZE(hb_probes); i++) { u32 id; u16 device; u16 vendor; - bus = pci_probes[i].bus; - slot = pci_probes[i].slot; + bus = hb_probes[i].bus; + slot = hb_probes[i].slot; id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); - vendor = id & 0xffff; device = (id>>16) & 0xffff; - if (pci_probes[i].vendor == vendor && - pci_probes[i].device == device) { + + if (vendor != PCI_VENDOR_ID_AMD) + continue; + + if (hb_probes[i].device == device) { found = true; break; } @@ -96,10 +104,16 @@ static int __init early_fill_mp_bus_info(void) if (!found) return 0; - for (i = 0; i < 4; i++) { + /* + * We should learn topology and routing information from _PXM and + * _CRS methods in the ACPI namespace. We extract node numbers + * here to work around BIOSes that don't supply _PXM. + */ + for (i = 0; i < AMD_NB_F1_CONFIG_MAP_RANGES; i++) { int min_bus; int max_bus; - reg = read_pci_config(bus, slot, 1, 0xe0 + (i << 2)); + reg = read_pci_config(bus, slot, 1, + AMD_NB_F1_CONFIG_MAP_REG + (i << 2)); /* Check if that register is enabled for bus range */ if ((reg & 7) != 3) @@ -113,10 +127,21 @@ static int __init early_fill_mp_bus_info(void) info = alloc_pci_root_info(min_bus, max_bus, node, link); } + /* + * The following code extracts routing information for use on old + * systems where Linux doesn't automatically use host bridge _CRS + * methods (or when the user specifies "pci=nocrs"). + * + * We only do this through Fam11h, because _CRS should be enough on + * newer systems. + */ + if (boot_cpu_data.x86 > 0x11) + return 0; + /* get the default node and link for left over res */ - reg = read_pci_config(bus, slot, 0, 0x60); + reg = read_pci_config(bus, slot, 0, AMD_NB_F0_NODE_ID); def_node = (reg >> 8) & 0x07; - reg = read_pci_config(bus, slot, 0, 0x64); + reg = read_pci_config(bus, slot, 0, AMD_NB_F0_UNIT_ID); def_link = (reg >> 8) & 0x03; memset(range, 0, sizeof(range)); @@ -363,7 +388,7 @@ static int __init pci_io_ecs_init(void) int cpu; /* assume all cpus from fam10h have IO ECS */ - if (boot_cpu_data.x86 < 0x10) + if (boot_cpu_data.x86 < 0x10) return 0; /* Try the PCI method first. */ @@ -387,7 +412,7 @@ static int __init amd_postcore_init(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) return 0; - early_fill_mp_bus_info(); + early_root_info_init(); pci_io_ecs_init(); return 0; diff --git a/arch/x86/pci/broadcom_bus.c b/arch/x86/pci/broadcom_bus.c index 614392ced7d6..bb461cfd01ab 100644 --- a/arch/x86/pci/broadcom_bus.c +++ b/arch/x86/pci/broadcom_bus.c @@ -60,8 +60,8 @@ static void __init cnb20le_res(u8 bus, u8 slot, u8 func) word1 = read_pci_config_16(bus, slot, func, 0xc4); word2 = read_pci_config_16(bus, slot, func, 0xc6); if (word1 != word2) { - res.start = (word1 << 16) | 0x0000; - res.end = (word2 << 16) | 0xffff; + res.start = ((resource_size_t) word1 << 16) | 0x0000; + res.end = ((resource_size_t) word2 << 16) | 0xffff; res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; update_res(info, res.start, res.end, res.flags, 0); } diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index 94ae9ae9574f..b5e60268d93f 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -6,6 +6,7 @@ #include <linux/dmi.h> #include <linux/pci.h> #include <linux/vgaarb.h> +#include <asm/hpet.h> #include <asm/pci_x86.h> static void pci_fixup_i450nx(struct pci_dev *d) @@ -337,9 +338,7 @@ static void pci_fixup_video(struct pci_dev *pdev) * type BRIDGE, or CARDBUS. Host to PCI controllers use * PCI header type NORMAL. */ - if (bridge - && ((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) - || (bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + if (bridge && (pci_is_bridge(bridge))) { pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &config); if (!(config & PCI_BRIDGE_CTL_VGA)) @@ -526,6 +525,19 @@ static void sb600_disable_hpet_bar(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar); +#ifdef CONFIG_HPET_TIMER +static void sb600_hpet_quirk(struct pci_dev *dev) +{ + struct resource *r = &dev->resource[1]; + + if (r->flags & IORESOURCE_MEM && r->start == hpet_address) { + r->flags |= IORESOURCE_PCI_FIXED; + dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n"); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk); +#endif + /* * Twinhead H12Y needs us to block out a region otherwise we map devices * there and any access kills the box. diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index db6b1ab43255..a19ed92e74e4 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -271,11 +271,16 @@ static void pcibios_allocate_dev_resources(struct pci_dev *dev, int pass) "BAR %d: reserving %pr (d=%d, p=%d)\n", idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - /* We'll assign a new address later */ - pcibios_save_fw_addr(dev, - idx, r->start); - r->end -= r->start; - r->start = 0; + if (r->flags & IORESOURCE_PCI_FIXED) { + dev_info(&dev->dev, "BAR %d %pR is immovable\n", + idx, r); + } else { + /* We'll assign a new address later */ + pcibios_save_fw_addr(dev, + idx, r->start); + r->end -= r->start; + r->start = 0; + } } } } @@ -356,6 +361,12 @@ static int __init pcibios_assign_resources(void) return 0; } +/** + * called in fs_initcall (one below subsys_initcall), + * give a chance for motherboard reserve resources + */ +fs_initcall(pcibios_assign_resources); + void pcibios_resource_survey_bus(struct pci_bus *bus) { dev_printk(KERN_DEBUG, &bus->dev, "Allocating resources\n"); @@ -392,12 +403,6 @@ void __init pcibios_resource_survey(void) ioapic_insert_resources(); } -/** - * called in fs_initcall (one below subsys_initcall), - * give a chance for motherboard reserve resources - */ -fs_initcall(pcibios_assign_resources); - static const struct vm_operations_struct pci_mmap_ops = { .access = generic_access_phys, }; diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c index 9d8a509c9730..5ceda85b8687 100644 --- a/arch/x86/pci/sta2x11-fixup.c +++ b/arch/x86/pci/sta2x11-fixup.c @@ -173,9 +173,7 @@ static void *sta2x11_swiotlb_alloc_coherent(struct device *dev, { void *vaddr; - vaddr = dma_generic_alloc_coherent(dev, size, dma_handle, flags, attrs); - if (!vaddr) - vaddr = swiotlb_alloc_coherent(dev, size, dma_handle, flags); + vaddr = x86_swiotlb_alloc_coherent(dev, size, dma_handle, flags, attrs); *dma_handle = p2a(*dma_handle, to_pci_dev(dev)); return vaddr; } @@ -183,7 +181,7 @@ static void *sta2x11_swiotlb_alloc_coherent(struct device *dev, /* We have our own dma_ops: the same as swiotlb but from alloc (above) */ static struct dma_map_ops sta2x11_dma_ops = { .alloc = sta2x11_swiotlb_alloc_coherent, - .free = swiotlb_free_coherent, + .free = x86_swiotlb_free_coherent, .map_page = swiotlb_map_page, .unmap_page = swiotlb_unmap_page, .map_sg = swiotlb_map_sg_attrs, diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 3781dd39e8bd..835b24820eaa 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -110,7 +110,7 @@ static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc) efi_status_t status; spin_lock_irqsave(&rtc_lock, flags); - status = efi_call_virt2(get_time, tm, tc); + status = efi_call_virt(get_time, tm, tc); spin_unlock_irqrestore(&rtc_lock, flags); return status; } @@ -121,7 +121,7 @@ static efi_status_t virt_efi_set_time(efi_time_t *tm) efi_status_t status; spin_lock_irqsave(&rtc_lock, flags); - status = efi_call_virt1(set_time, tm); + status = efi_call_virt(set_time, tm); spin_unlock_irqrestore(&rtc_lock, flags); return status; } @@ -134,8 +134,7 @@ static efi_status_t virt_efi_get_wakeup_time(efi_bool_t *enabled, efi_status_t status; spin_lock_irqsave(&rtc_lock, flags); - status = efi_call_virt3(get_wakeup_time, - enabled, pending, tm); + status = efi_call_virt(get_wakeup_time, enabled, pending, tm); spin_unlock_irqrestore(&rtc_lock, flags); return status; } @@ -146,8 +145,7 @@ static efi_status_t virt_efi_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm) efi_status_t status; spin_lock_irqsave(&rtc_lock, flags); - status = efi_call_virt2(set_wakeup_time, - enabled, tm); + status = efi_call_virt(set_wakeup_time, enabled, tm); spin_unlock_irqrestore(&rtc_lock, flags); return status; } @@ -158,17 +156,17 @@ static efi_status_t virt_efi_get_variable(efi_char16_t *name, unsigned long *data_size, void *data) { - return efi_call_virt5(get_variable, - name, vendor, attr, - data_size, data); + return efi_call_virt(get_variable, + name, vendor, attr, + data_size, data); } static efi_status_t virt_efi_get_next_variable(unsigned long *name_size, efi_char16_t *name, efi_guid_t *vendor) { - return efi_call_virt3(get_next_variable, - name_size, name, vendor); + return efi_call_virt(get_next_variable, + name_size, name, vendor); } static efi_status_t virt_efi_set_variable(efi_char16_t *name, @@ -177,9 +175,9 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name, unsigned long data_size, void *data) { - return efi_call_virt5(set_variable, - name, vendor, attr, - data_size, data); + return efi_call_virt(set_variable, + name, vendor, attr, + data_size, data); } static efi_status_t virt_efi_query_variable_info(u32 attr, @@ -190,13 +188,13 @@ static efi_status_t virt_efi_query_variable_info(u32 attr, if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION) return EFI_UNSUPPORTED; - return efi_call_virt4(query_variable_info, attr, storage_space, - remaining_space, max_variable_size); + return efi_call_virt(query_variable_info, attr, storage_space, + remaining_space, max_variable_size); } static efi_status_t virt_efi_get_next_high_mono_count(u32 *count) { - return efi_call_virt1(get_next_high_mono_count, count); + return efi_call_virt(get_next_high_mono_count, count); } static void virt_efi_reset_system(int reset_type, @@ -204,8 +202,8 @@ static void virt_efi_reset_system(int reset_type, unsigned long data_size, efi_char16_t *data) { - efi_call_virt4(reset_system, reset_type, status, - data_size, data); + __efi_call_virt(reset_system, reset_type, status, + data_size, data); } static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules, @@ -215,7 +213,7 @@ static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules, if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION) return EFI_UNSUPPORTED; - return efi_call_virt3(update_capsule, capsules, count, sg_list); + return efi_call_virt(update_capsule, capsules, count, sg_list); } static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules, @@ -226,8 +224,8 @@ static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules, if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION) return EFI_UNSUPPORTED; - return efi_call_virt4(query_capsule_caps, capsules, count, max_size, - reset_type); + return efi_call_virt(query_capsule_caps, capsules, count, max_size, + reset_type); } static efi_status_t __init phys_efi_set_virtual_address_map( @@ -239,9 +237,9 @@ static efi_status_t __init phys_efi_set_virtual_address_map( efi_status_t status; efi_call_phys_prelog(); - status = efi_call_phys4(efi_phys.set_virtual_address_map, - memory_map_size, descriptor_size, - descriptor_version, virtual_map); + status = efi_call_phys(efi_phys.set_virtual_address_map, + memory_map_size, descriptor_size, + descriptor_version, virtual_map); efi_call_phys_epilog(); return status; } diff --git a/arch/x86/platform/efi/efi_stub_64.S b/arch/x86/platform/efi/efi_stub_64.S index e0984ef0374b..5fcda7272550 100644 --- a/arch/x86/platform/efi/efi_stub_64.S +++ b/arch/x86/platform/efi/efi_stub_64.S @@ -73,84 +73,7 @@ 2: .endm -ENTRY(efi_call0) - SAVE_XMM - subq $32, %rsp - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $32, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call0) - -ENTRY(efi_call1) - SAVE_XMM - subq $32, %rsp - mov %rsi, %rcx - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $32, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call1) - -ENTRY(efi_call2) - SAVE_XMM - subq $32, %rsp - mov %rsi, %rcx - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $32, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call2) - -ENTRY(efi_call3) - SAVE_XMM - subq $32, %rsp - mov %rcx, %r8 - mov %rsi, %rcx - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $32, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call3) - -ENTRY(efi_call4) - SAVE_XMM - subq $32, %rsp - mov %r8, %r9 - mov %rcx, %r8 - mov %rsi, %rcx - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $32, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call4) - -ENTRY(efi_call5) - SAVE_XMM - subq $48, %rsp - mov %r9, 32(%rsp) - mov %r8, %r9 - mov %rcx, %r8 - mov %rsi, %rcx - SWITCH_PGT - call *%rdi - RESTORE_PGT - addq $48, %rsp - RESTORE_XMM - ret -ENDPROC(efi_call5) - -ENTRY(efi_call6) +ENTRY(efi_call) SAVE_XMM mov (%rsp), %rax mov 8(%rax), %rax @@ -166,7 +89,7 @@ ENTRY(efi_call6) addq $48, %rsp RESTORE_XMM ret -ENDPROC(efi_call6) +ENDPROC(efi_call) #ifdef CONFIG_EFI_MIXED diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c index 766612137a62..1584cbed0dce 100644 --- a/arch/x86/platform/uv/bios_uv.c +++ b/arch/x86/platform/uv/bios_uv.c @@ -39,7 +39,7 @@ s64 uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3, u64 a4, u64 a5) */ return BIOS_STATUS_UNIMPLEMENTED; - ret = efi_call6((void *)__va(tab->function), (u64)which, + ret = efi_call((void *)__va(tab->function), (u64)which, a1, a2, a3, a4, a5); return ret; } diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index acf7752da952..b233681af4de 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -238,11 +238,9 @@ uv_set_irq_affinity(struct irq_data *data, const struct cpumask *mask, int uv_setup_irq(char *irq_name, int cpu, int mmr_blade, unsigned long mmr_offset, int limit) { - int irq, ret; + int ret, irq = irq_alloc_hwirq(uv_blade_to_memory_nid(mmr_blade)); - irq = create_irq_nr(NR_IRQS_LEGACY, uv_blade_to_memory_nid(mmr_blade)); - - if (irq <= 0) + if (!irq) return -EBUSY; ret = arch_enable_uv_irq(irq_name, irq, cpu, mmr_blade, mmr_offset, @@ -250,7 +248,7 @@ int uv_setup_irq(char *irq_name, int cpu, int mmr_blade, if (ret == irq) uv_set_irq_2_mmr_info(irq, mmr_offset, mmr_blade); else - destroy_irq(irq); + irq_free_hwirq(irq); return ret; } @@ -285,6 +283,6 @@ void uv_teardown_irq(unsigned int irq) n = n->rb_right; } spin_unlock_irqrestore(&uv_irq_lock, irqflags); - destroy_irq(irq); + irq_free_hwirq(irq); } EXPORT_SYMBOL_GPL(uv_teardown_irq); diff --git a/arch/x86/platform/uv/uv_nmi.c b/arch/x86/platform/uv/uv_nmi.c index be27da60dc8f..c89c93320c12 100644 --- a/arch/x86/platform/uv/uv_nmi.c +++ b/arch/x86/platform/uv/uv_nmi.c @@ -85,7 +85,7 @@ static cpumask_var_t uv_nmi_cpu_mask; * Default is all stack dumps go to the console and buffer. * Lower level to send to log buffer only. */ -static int uv_nmi_loglevel = 7; +static int uv_nmi_loglevel = CONSOLE_LOGLEVEL_DEFAULT; module_param_named(dump_loglevel, uv_nmi_loglevel, int, 0644); /* diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 3497f14e4dea..7c0d7be176a5 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -52,8 +52,9 @@ $(obj)/realmode.elf: $(obj)/realmode.lds $(REALMODE_OBJS) FORCE OBJCOPYFLAGS_realmode.bin := -O binary targets += realmode.bin -$(obj)/realmode.bin: $(obj)/realmode.elf $(obj)/realmode.relocs +$(obj)/realmode.bin: $(obj)/realmode.elf $(obj)/realmode.relocs FORCE $(call if_changed,objcopy) + @: quiet_cmd_relocs = RELOCS $@ cmd_relocs = arch/x86/tools/relocs --realmode $< > $@ diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl index 04376ac3d9ef..ec255a1646d2 100644 --- a/arch/x86/syscalls/syscall_64.tbl +++ b/arch/x86/syscalls/syscall_64.tbl @@ -212,10 +212,10 @@ 203 common sched_setaffinity sys_sched_setaffinity 204 common sched_getaffinity sys_sched_getaffinity 205 64 set_thread_area -206 common io_setup sys_io_setup +206 64 io_setup sys_io_setup 207 common io_destroy sys_io_destroy 208 common io_getevents sys_io_getevents -209 common io_submit sys_io_submit +209 64 io_submit sys_io_submit 210 common io_cancel sys_io_cancel 211 64 get_thread_area 212 common lookup_dcookie sys_lookup_dcookie @@ -359,3 +359,5 @@ 540 x32 process_vm_writev compat_sys_process_vm_writev 541 x32 setsockopt compat_sys_setsockopt 542 x32 getsockopt compat_sys_getsockopt +543 x32 io_setup compat_sys_io_setup +544 x32 io_submit compat_sys_io_submit diff --git a/arch/x86/um/vdso/vma.c b/arch/x86/um/vdso/vma.c index af91901babb8..916cda4cd5b4 100644 --- a/arch/x86/um/vdso/vma.c +++ b/arch/x86/um/vdso/vma.c @@ -12,7 +12,7 @@ #include <asm/page.h> #include <linux/init.h> -unsigned int __read_mostly vdso_enabled = 1; +static unsigned int __read_mostly vdso_enabled = 1; unsigned long um_vdso_addr; extern unsigned long task_size; diff --git a/arch/x86/vdso/.gitignore b/arch/x86/vdso/.gitignore index 3282874bc61d..aae8ffdd5880 100644 --- a/arch/x86/vdso/.gitignore +++ b/arch/x86/vdso/.gitignore @@ -1,8 +1,7 @@ vdso.lds -vdso-syms.lds vdsox32.lds -vdsox32-syms.lds -vdso32-syms.lds vdso32-syscall-syms.lds vdso32-sysenter-syms.lds vdso32-int80-syms.lds +vdso-image-*.c +vdso2c diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index c580d1210ffe..895d4b16b7e3 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -24,15 +24,30 @@ vobj64s := $(filter-out $(vobjx32s-compat),$(vobjs-y)) # files to link into kernel obj-y += vma.o -obj-$(VDSO64-y) += vdso.o -obj-$(VDSOX32-y) += vdsox32.o -obj-$(VDSO32-y) += vdso32.o vdso32-setup.o + +# vDSO images to build +vdso_img-$(VDSO64-y) += 64 +vdso_img-$(VDSOX32-y) += x32 +vdso_img-$(VDSO32-y) += 32-int80 +vdso_img-$(CONFIG_COMPAT) += 32-syscall +vdso_img-$(VDSO32-y) += 32-sysenter + +obj-$(VDSO32-y) += vdso32-setup.o vobjs := $(foreach F,$(vobj64s),$(obj)/$F) $(obj)/vdso.o: $(obj)/vdso.so -targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y) +targets += vdso.lds $(vobjs-y) + +# Build the vDSO image C files and link them in. +vdso_img_objs := $(vdso_img-y:%=vdso-image-%.o) +vdso_img_cfiles := $(vdso_img-y:%=vdso-image-%.c) +vdso_img_sodbg := $(vdso_img-y:%=vdso%.so.dbg) +obj-y += $(vdso_img_objs) +targets += $(vdso_img_cfiles) +targets += $(vdso_img_sodbg) +.SECONDARY: $(vdso_img-y:%=$(obj)/vdso-image-%.c) export CPPFLAGS_vdso.lds += -P -C @@ -41,14 +56,18 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \ -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 \ $(DISABLE_LTO) -$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so - -$(obj)/vdso.so.dbg: $(src)/vdso.lds $(vobjs) FORCE +$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE $(call if_changed,vdso) -$(obj)/%.so: OBJCOPYFLAGS := -S -$(obj)/%.so: $(obj)/%.so.dbg FORCE - $(call if_changed,objcopy) +hostprogs-y += vdso2c + +quiet_cmd_vdso2c = VDSO2C $@ +define cmd_vdso2c + $(obj)/vdso2c $< $@ +endef + +$(obj)/vdso-image-%.c: $(obj)/vdso%.so.dbg $(obj)/vdso2c FORCE + $(call if_changed,vdso2c) # # Don't omit frame pointers for ease of userspace debugging, but do @@ -68,22 +87,6 @@ CFLAGS_REMOVE_vclock_gettime.o = -pg CFLAGS_REMOVE_vgetcpu.o = -pg CFLAGS_REMOVE_vvar.o = -pg -targets += vdso-syms.lds -obj-$(VDSO64-y) += vdso-syms.lds - -# -# Match symbols in the DSO that look like VDSO*; produce a file of constants. -# -sed-vdsosym := -e 's/^00*/0/' \ - -e 's/^\([0-9a-fA-F]*\) . \(VDSO[a-zA-Z0-9_]*\)$$/\2 = 0x\1;/p' -quiet_cmd_vdsosym = VDSOSYM $@ -define cmd_vdsosym - $(NM) $< | LC_ALL=C sed -n $(sed-vdsosym) | LC_ALL=C sort > $@ -endef - -$(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE - $(call if_changed,vdsosym) - # # X32 processes use x32 vDSO to access 64bit kernel data. # @@ -94,9 +97,6 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE # so that it can reach 64bit address space with 64bit pointers. # -targets += vdsox32-syms.lds -obj-$(VDSOX32-y) += vdsox32-syms.lds - CPPFLAGS_vdsox32.lds = $(CPPFLAGS_vdso.lds) VDSO_LDFLAGS_vdsox32.lds = -Wl,-m,elf32_x86_64 \ -Wl,-soname=linux-vdso.so.1 \ @@ -113,9 +113,7 @@ quiet_cmd_x32 = X32 $@ $(obj)/%-x32.o: $(obj)/%.o FORCE $(call if_changed,x32) -targets += vdsox32.so vdsox32.so.dbg vdsox32.lds $(vobjx32s-y) - -$(obj)/vdsox32.o: $(src)/vdsox32.S $(obj)/vdsox32.so +targets += vdsox32.lds $(vobjx32s-y) $(obj)/vdsox32.so.dbg: $(src)/vdsox32.lds $(vobjx32s) FORCE $(call if_changed,vdso) @@ -123,7 +121,6 @@ $(obj)/vdsox32.so.dbg: $(src)/vdsox32.lds $(vobjx32s) FORCE # # Build multiple 32-bit vDSO images to choose from at boot time. # -obj-$(VDSO32-y) += vdso32-syms.lds vdso32.so-$(VDSO32-y) += int80 vdso32.so-$(CONFIG_COMPAT) += syscall vdso32.so-$(VDSO32-y) += sysenter @@ -138,10 +135,8 @@ VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-m,elf_i386 -Wl,-soname=linux-gate.so.1 override obj-dirs = $(dir $(obj)) $(obj)/vdso32/ targets += vdso32/vdso32.lds -targets += $(vdso32-images) $(vdso32-images:=.dbg) targets += vdso32/note.o vdso32/vclock_gettime.o $(vdso32.so-y:%=vdso32/%.o) - -extra-y += $(vdso32-images) +targets += vdso32/vclock_gettime.o $(obj)/vdso32.o: $(vdso32-images:%=$(obj)/%) @@ -166,27 +161,6 @@ $(vdso32-images:%=$(obj)/%.dbg): $(obj)/vdso32-%.so.dbg: FORCE \ $(obj)/vdso32/%.o $(call if_changed,vdso) -# Make vdso32-*-syms.lds from each image, and then make sure they match. -# The only difference should be that some do not define VDSO32_SYSENTER_RETURN. - -targets += vdso32-syms.lds $(vdso32.so-y:%=vdso32-%-syms.lds) - -quiet_cmd_vdso32sym = VDSOSYM $@ -define cmd_vdso32sym - if LC_ALL=C sort -u $(filter-out FORCE,$^) > $(@D)/.tmp_$(@F) && \ - $(foreach H,$(filter-out FORCE,$^),\ - if grep -q VDSO32_SYSENTER_RETURN $H; \ - then diff -u $(@D)/.tmp_$(@F) $H; \ - else sed /VDSO32_SYSENTER_RETURN/d $(@D)/.tmp_$(@F) | \ - diff -u - $H; fi &&) : ;\ - then mv -f $(@D)/.tmp_$(@F) $@; \ - else rm -f $(@D)/.tmp_$(@F); exit 1; \ - fi -endef - -$(obj)/vdso32-syms.lds: $(vdso32.so-y:%=$(obj)/vdso32-%-syms.lds) FORCE - $(call if_changed,vdso32sym) - # # The DSO images are built using a special linker script. # @@ -197,7 +171,7 @@ quiet_cmd_vdso = VDSO $@ sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) \ - $(LTO_CFLAGS) + -Wl,-Bsymbolic $(LTO_CFLAGS) GCOV_PROFILE := n # diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index 16d686171e9a..b2e4f493e5b0 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -30,9 +30,12 @@ extern int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz); extern time_t __vdso_time(time_t *t); #ifdef CONFIG_HPET_TIMER -static inline u32 read_hpet_counter(const volatile void *addr) +extern u8 hpet_page + __attribute__((visibility("hidden"))); + +static notrace cycle_t vread_hpet(void) { - return *(const volatile u32 *) (addr + HPET_COUNTER); + return *(const volatile u32 *)(&hpet_page + HPET_COUNTER); } #endif @@ -43,11 +46,6 @@ static inline u32 read_hpet_counter(const volatile void *addr) #include <asm/fixmap.h> #include <asm/pvclock.h> -static notrace cycle_t vread_hpet(void) -{ - return read_hpet_counter((const void *)fix_to_virt(VSYSCALL_HPET)); -} - notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; @@ -137,16 +135,6 @@ static notrace cycle_t vread_pvclock(int *mode) #else -extern u8 hpet_page - __attribute__((visibility("hidden"))); - -#ifdef CONFIG_HPET_TIMER -static notrace cycle_t vread_hpet(void) -{ - return read_hpet_counter((const void *)(&hpet_page)); -} -#endif - notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { long ret; @@ -154,7 +142,7 @@ notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) asm( "mov %%ebx, %%edx \n" "mov %2, %%ebx \n" - "call VDSO32_vsyscall \n" + "call __kernel_vsyscall \n" "mov %%edx, %%ebx \n" : "=a" (ret) : "0" (__NR_clock_gettime), "g" (clock), "c" (ts) @@ -169,7 +157,7 @@ notrace static long vdso_fallback_gtod(struct timeval *tv, struct timezone *tz) asm( "mov %%ebx, %%edx \n" "mov %2, %%ebx \n" - "call VDSO32_vsyscall \n" + "call __kernel_vsyscall \n" "mov %%edx, %%ebx \n" : "=a" (ret) : "0" (__NR_gettimeofday), "g" (tv), "c" (tz) diff --git a/arch/x86/vdso/vdso-layout.lds.S b/arch/x86/vdso/vdso-layout.lds.S index 9df017ab2285..2ec72f651ebf 100644 --- a/arch/x86/vdso/vdso-layout.lds.S +++ b/arch/x86/vdso/vdso-layout.lds.S @@ -1,3 +1,5 @@ +#include <asm/vdso.h> + /* * Linker script for vDSO. This is an ELF shared object prelinked to * its virtual address, and with only one read-only segment. @@ -6,20 +8,6 @@ SECTIONS { -#ifdef BUILD_VDSO32 -#include <asm/vdso32.h> - - hpet_page = . - VDSO_OFFSET(VDSO_HPET_PAGE); - - vvar = . - VDSO_OFFSET(VDSO_VVAR_PAGE); - - /* Place all vvars at the offsets in asm/vvar.h. */ -#define EMIT_VVAR(name, offset) vvar_ ## name = vvar + offset; -#define __VVAR_KERNEL_LDS -#include <asm/vvar.h> -#undef __VVAR_KERNEL_LDS -#undef EMIT_VVAR -#endif . = SIZEOF_HEADERS; .hash : { *(.hash) } :text @@ -60,10 +48,30 @@ SECTIONS .text : { *(.text*) } :text =0x90909090, /* - * The comma above works around a bug in gold: - * https://sourceware.org/bugzilla/show_bug.cgi?id=16804 + * The remainder of the vDSO consists of special pages that are + * shared between the kernel and userspace. It needs to be at the + * end so that it doesn't overlap the mapping of the actual + * vDSO image. */ + . = ALIGN(PAGE_SIZE); + vvar_page = .; + + /* Place all vvars at the offsets in asm/vvar.h. */ +#define EMIT_VVAR(name, offset) vvar_ ## name = vvar_page + offset; +#define __VVAR_KERNEL_LDS +#include <asm/vvar.h> +#undef __VVAR_KERNEL_LDS +#undef EMIT_VVAR + + . = vvar_page + PAGE_SIZE; + + hpet_page = .; + . = . + PAGE_SIZE; + + . = ALIGN(PAGE_SIZE); + end_mapping = .; + /DISCARD/ : { *(.discard) *(.discard.*) diff --git a/arch/x86/vdso/vdso.S b/arch/x86/vdso/vdso.S deleted file mode 100644 index be3f23b09af5..000000000000 --- a/arch/x86/vdso/vdso.S +++ /dev/null @@ -1,3 +0,0 @@ -#include <asm/vdso.h> - -DEFINE_VDSO_IMAGE(vdso, "arch/x86/vdso/vdso.so") diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S index b96b2677cad8..75e3404c83b1 100644 --- a/arch/x86/vdso/vdso.lds.S +++ b/arch/x86/vdso/vdso.lds.S @@ -1,14 +1,11 @@ /* * Linker script for 64-bit vDSO. * We #include the file to define the layout details. - * Here we only choose the prelinked virtual address. * * This file defines the version script giving the user-exported symbols in - * the DSO. We can define local symbols here called VDSO* to make their - * values visible using the asm-x86/vdso.h macros from the kernel proper. + * the DSO. */ -#define VDSO_PRELINK 0xffffffffff700000 #include "vdso-layout.lds.S" /* @@ -28,5 +25,3 @@ VERSION { local: *; }; } - -VDSO64_PRELINK = VDSO_PRELINK; diff --git a/arch/x86/vdso/vdso2c.c b/arch/x86/vdso/vdso2c.c new file mode 100644 index 000000000000..deabaf5bfb89 --- /dev/null +++ b/arch/x86/vdso/vdso2c.c @@ -0,0 +1,173 @@ +#include <inttypes.h> +#include <stdint.h> +#include <unistd.h> +#include <stdarg.h> +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <fcntl.h> +#include <err.h> + +#include <sys/mman.h> +#include <sys/types.h> + +#include <linux/elf.h> +#include <linux/types.h> + +const char *outfilename; + +/* Symbols that we need in vdso2c. */ +enum { + sym_vvar_page, + sym_hpet_page, + sym_end_mapping, +}; + +const int special_pages[] = { + sym_vvar_page, + sym_hpet_page, +}; + +char const * const required_syms[] = { + [sym_vvar_page] = "vvar_page", + [sym_hpet_page] = "hpet_page", + [sym_end_mapping] = "end_mapping", + "VDSO32_NOTE_MASK", + "VDSO32_SYSENTER_RETURN", + "__kernel_vsyscall", + "__kernel_sigreturn", + "__kernel_rt_sigreturn", +}; + +__attribute__((format(printf, 1, 2))) __attribute__((noreturn)) +static void fail(const char *format, ...) +{ + va_list ap; + va_start(ap, format); + fprintf(stderr, "Error: "); + vfprintf(stderr, format, ap); + unlink(outfilename); + exit(1); + va_end(ap); +} + +/* + * Evil macros to do a little-endian read. + */ +#define GLE(x, bits, ifnot) \ + __builtin_choose_expr( \ + (sizeof(x) == bits/8), \ + (__typeof__(x))le##bits##toh(x), ifnot) + +extern void bad_get_le(uint64_t); +#define LAST_LE(x) \ + __builtin_choose_expr(sizeof(x) == 1, (x), bad_get_le(x)) + +#define GET_LE(x) \ + GLE(x, 64, GLE(x, 32, GLE(x, 16, LAST_LE(x)))) + +#define NSYMS (sizeof(required_syms) / sizeof(required_syms[0])) + +#define BITS 64 +#define GOFUNC go64 +#define Elf_Ehdr Elf64_Ehdr +#define Elf_Shdr Elf64_Shdr +#define Elf_Phdr Elf64_Phdr +#define Elf_Sym Elf64_Sym +#define Elf_Dyn Elf64_Dyn +#include "vdso2c.h" +#undef BITS +#undef GOFUNC +#undef Elf_Ehdr +#undef Elf_Shdr +#undef Elf_Phdr +#undef Elf_Sym +#undef Elf_Dyn + +#define BITS 32 +#define GOFUNC go32 +#define Elf_Ehdr Elf32_Ehdr +#define Elf_Shdr Elf32_Shdr +#define Elf_Phdr Elf32_Phdr +#define Elf_Sym Elf32_Sym +#define Elf_Dyn Elf32_Dyn +#include "vdso2c.h" +#undef BITS +#undef GOFUNC +#undef Elf_Ehdr +#undef Elf_Shdr +#undef Elf_Phdr +#undef Elf_Sym +#undef Elf_Dyn + +static void go(void *addr, size_t len, FILE *outfile, const char *name) +{ + Elf64_Ehdr *hdr = (Elf64_Ehdr *)addr; + + if (hdr->e_ident[EI_CLASS] == ELFCLASS64) { + go64(addr, len, outfile, name); + } else if (hdr->e_ident[EI_CLASS] == ELFCLASS32) { + go32(addr, len, outfile, name); + } else { + fail("unknown ELF class\n"); + } +} + +int main(int argc, char **argv) +{ + int fd; + off_t len; + void *addr; + FILE *outfile; + char *name, *tmp; + int namelen; + + if (argc != 3) { + printf("Usage: vdso2c INPUT OUTPUT\n"); + return 1; + } + + /* + * Figure out the struct name. If we're writing to a .so file, + * generate raw output insted. + */ + name = strdup(argv[2]); + namelen = strlen(name); + if (namelen >= 3 && !strcmp(name + namelen - 3, ".so")) { + name = NULL; + } else { + tmp = strrchr(name, '/'); + if (tmp) + name = tmp + 1; + tmp = strchr(name, '.'); + if (tmp) + *tmp = '\0'; + for (tmp = name; *tmp; tmp++) + if (*tmp == '-') + *tmp = '_'; + } + + fd = open(argv[1], O_RDONLY); + if (fd == -1) + err(1, "%s", argv[1]); + + len = lseek(fd, 0, SEEK_END); + if (len == (off_t)-1) + err(1, "lseek"); + + addr = mmap(NULL, len, PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); + if (addr == MAP_FAILED) + err(1, "mmap"); + + outfilename = argv[2]; + outfile = fopen(outfilename, "w"); + if (!outfile) + err(1, "%s", argv[2]); + + go(addr, (size_t)len, outfile, name); + + munmap(addr, len); + fclose(outfile); + + return 0; +} diff --git a/arch/x86/vdso/vdso2c.h b/arch/x86/vdso/vdso2c.h new file mode 100644 index 000000000000..d1e99e1892c4 --- /dev/null +++ b/arch/x86/vdso/vdso2c.h @@ -0,0 +1,163 @@ +/* + * This file is included twice from vdso2c.c. It generates code for 32-bit + * and 64-bit vDSOs. We need both for 64-bit builds, since 32-bit vDSOs + * are built for 32-bit userspace. + */ + +static void GOFUNC(void *addr, size_t len, FILE *outfile, const char *name) +{ + int found_load = 0; + unsigned long load_size = -1; /* Work around bogus warning */ + unsigned long data_size; + Elf_Ehdr *hdr = (Elf_Ehdr *)addr; + int i; + unsigned long j; + Elf_Shdr *symtab_hdr = NULL, *strtab_hdr, *secstrings_hdr, + *alt_sec = NULL; + Elf_Dyn *dyn = 0, *dyn_end = 0; + const char *secstrings; + uint64_t syms[NSYMS] = {}; + + Elf_Phdr *pt = (Elf_Phdr *)(addr + GET_LE(hdr->e_phoff)); + + /* Walk the segment table. */ + for (i = 0; i < GET_LE(hdr->e_phnum); i++) { + if (GET_LE(pt[i].p_type) == PT_LOAD) { + if (found_load) + fail("multiple PT_LOAD segs\n"); + + if (GET_LE(pt[i].p_offset) != 0 || + GET_LE(pt[i].p_vaddr) != 0) + fail("PT_LOAD in wrong place\n"); + + if (GET_LE(pt[i].p_memsz) != GET_LE(pt[i].p_filesz)) + fail("cannot handle memsz != filesz\n"); + + load_size = GET_LE(pt[i].p_memsz); + found_load = 1; + } else if (GET_LE(pt[i].p_type) == PT_DYNAMIC) { + dyn = addr + GET_LE(pt[i].p_offset); + dyn_end = addr + GET_LE(pt[i].p_offset) + + GET_LE(pt[i].p_memsz); + } + } + if (!found_load) + fail("no PT_LOAD seg\n"); + data_size = (load_size + 4095) / 4096 * 4096; + + /* Walk the dynamic table */ + for (i = 0; dyn + i < dyn_end && + GET_LE(dyn[i].d_tag) != DT_NULL; i++) { + typeof(dyn[i].d_tag) tag = GET_LE(dyn[i].d_tag); + if (tag == DT_REL || tag == DT_RELSZ || + tag == DT_RELENT || tag == DT_TEXTREL) + fail("vdso image contains dynamic relocations\n"); + } + + /* Walk the section table */ + secstrings_hdr = addr + GET_LE(hdr->e_shoff) + + GET_LE(hdr->e_shentsize)*GET_LE(hdr->e_shstrndx); + secstrings = addr + GET_LE(secstrings_hdr->sh_offset); + for (i = 0; i < GET_LE(hdr->e_shnum); i++) { + Elf_Shdr *sh = addr + GET_LE(hdr->e_shoff) + + GET_LE(hdr->e_shentsize) * i; + if (GET_LE(sh->sh_type) == SHT_SYMTAB) + symtab_hdr = sh; + + if (!strcmp(secstrings + GET_LE(sh->sh_name), + ".altinstructions")) + alt_sec = sh; + } + + if (!symtab_hdr) + fail("no symbol table\n"); + + strtab_hdr = addr + GET_LE(hdr->e_shoff) + + GET_LE(hdr->e_shentsize) * GET_LE(symtab_hdr->sh_link); + + /* Walk the symbol table */ + for (i = 0; + i < GET_LE(symtab_hdr->sh_size) / GET_LE(symtab_hdr->sh_entsize); + i++) { + int k; + Elf_Sym *sym = addr + GET_LE(symtab_hdr->sh_offset) + + GET_LE(symtab_hdr->sh_entsize) * i; + const char *name = addr + GET_LE(strtab_hdr->sh_offset) + + GET_LE(sym->st_name); + for (k = 0; k < NSYMS; k++) { + if (!strcmp(name, required_syms[k])) { + if (syms[k]) { + fail("duplicate symbol %s\n", + required_syms[k]); + } + syms[k] = GET_LE(sym->st_value); + } + } + } + + /* Validate mapping addresses. */ + for (i = 0; i < sizeof(special_pages) / sizeof(special_pages[0]); i++) { + if (!syms[i]) + continue; /* The mapping isn't used; ignore it. */ + + if (syms[i] % 4096) + fail("%s must be a multiple of 4096\n", + required_syms[i]); + if (syms[i] < data_size) + fail("%s must be after the text mapping\n", + required_syms[i]); + if (syms[sym_end_mapping] < syms[i] + 4096) + fail("%s overruns end_mapping\n", required_syms[i]); + } + if (syms[sym_end_mapping] % 4096) + fail("end_mapping must be a multiple of 4096\n"); + + /* Remove sections. */ + hdr->e_shoff = 0; + hdr->e_shentsize = 0; + hdr->e_shnum = 0; + hdr->e_shstrndx = htole16(SHN_UNDEF); + + if (!name) { + fwrite(addr, load_size, 1, outfile); + return; + } + + fprintf(outfile, "/* AUTOMATICALLY GENERATED -- DO NOT EDIT */\n\n"); + fprintf(outfile, "#include <linux/linkage.h>\n"); + fprintf(outfile, "#include <asm/page_types.h>\n"); + fprintf(outfile, "#include <asm/vdso.h>\n"); + fprintf(outfile, "\n"); + fprintf(outfile, + "static unsigned char raw_data[%lu] __page_aligned_data = {", + data_size); + for (j = 0; j < load_size; j++) { + if (j % 10 == 0) + fprintf(outfile, "\n\t"); + fprintf(outfile, "0x%02X, ", (int)((unsigned char *)addr)[j]); + } + fprintf(outfile, "\n};\n\n"); + + fprintf(outfile, "static struct page *pages[%lu];\n\n", + data_size / 4096); + + fprintf(outfile, "const struct vdso_image %s = {\n", name); + fprintf(outfile, "\t.data = raw_data,\n"); + fprintf(outfile, "\t.size = %lu,\n", data_size); + fprintf(outfile, "\t.text_mapping = {\n"); + fprintf(outfile, "\t\t.name = \"[vdso]\",\n"); + fprintf(outfile, "\t\t.pages = pages,\n"); + fprintf(outfile, "\t},\n"); + if (alt_sec) { + fprintf(outfile, "\t.alt = %lu,\n", + (unsigned long)GET_LE(alt_sec->sh_offset)); + fprintf(outfile, "\t.alt_len = %lu,\n", + (unsigned long)GET_LE(alt_sec->sh_size)); + } + for (i = 0; i < NSYMS; i++) { + if (syms[i]) + fprintf(outfile, "\t.sym_%s = 0x%" PRIx64 ",\n", + required_syms[i], syms[i]); + } + fprintf(outfile, "};\n"); +} diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c index e1f220e3ca68..e4f7781ee162 100644 --- a/arch/x86/vdso/vdso32-setup.c +++ b/arch/x86/vdso/vdso32-setup.c @@ -8,27 +8,12 @@ #include <linux/init.h> #include <linux/smp.h> -#include <linux/thread_info.h> -#include <linux/sched.h> -#include <linux/gfp.h> -#include <linux/string.h> -#include <linux/elf.h> -#include <linux/mm.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/mm_types.h> #include <asm/cpufeature.h> -#include <asm/msr.h> -#include <asm/pgtable.h> -#include <asm/unistd.h> -#include <asm/elf.h> -#include <asm/tlbflush.h> +#include <asm/processor.h> #include <asm/vdso.h> -#include <asm/proto.h> -#include <asm/fixmap.h> -#include <asm/hpet.h> -#include <asm/vvar.h> #ifdef CONFIG_COMPAT_VDSO #define VDSO_DEFAULT 0 @@ -36,23 +21,17 @@ #define VDSO_DEFAULT 1 #endif -#ifdef CONFIG_X86_64 -#define vdso_enabled sysctl_vsyscall32 -#define arch_setup_additional_pages syscall32_setup_pages -extern int sysctl_ldt16; -#endif - /* * Should the kernel map a VDSO page into processes and pass its * address down to glibc upon exec()? */ -unsigned int __read_mostly vdso_enabled = VDSO_DEFAULT; +unsigned int __read_mostly vdso32_enabled = VDSO_DEFAULT; -static int __init vdso_setup(char *s) +static int __init vdso32_setup(char *s) { - vdso_enabled = simple_strtoul(s, NULL, 0); + vdso32_enabled = simple_strtoul(s, NULL, 0); - if (vdso_enabled > 1) + if (vdso32_enabled > 1) pr_warn("vdso32 values other than 0 and 1 are no longer allowed; vdso disabled\n"); return 1; @@ -63,177 +42,45 @@ static int __init vdso_setup(char *s) * behavior on both 64-bit and 32-bit kernels. * On 32-bit kernels, vdso=[012] means the same thing. */ -__setup("vdso32=", vdso_setup); +__setup("vdso32=", vdso32_setup); #ifdef CONFIG_X86_32 -__setup_param("vdso=", vdso32_setup, vdso_setup, 0); - -EXPORT_SYMBOL_GPL(vdso_enabled); +__setup_param("vdso=", vdso_setup, vdso32_setup, 0); #endif -static struct page **vdso32_pages; -static unsigned vdso32_size; - #ifdef CONFIG_X86_64 #define vdso32_sysenter() (boot_cpu_has(X86_FEATURE_SYSENTER32)) #define vdso32_syscall() (boot_cpu_has(X86_FEATURE_SYSCALL32)) -/* May not be __init: called during resume */ -void syscall32_cpu_init(void) -{ - /* Load these always in case some future AMD CPU supports - SYSENTER from compat mode too. */ - wrmsrl_safe(MSR_IA32_SYSENTER_CS, (u64)__KERNEL_CS); - wrmsrl_safe(MSR_IA32_SYSENTER_ESP, 0ULL); - wrmsrl_safe(MSR_IA32_SYSENTER_EIP, (u64)ia32_sysenter_target); - - wrmsrl(MSR_CSTAR, ia32_cstar_target); -} - #else /* CONFIG_X86_32 */ #define vdso32_sysenter() (boot_cpu_has(X86_FEATURE_SEP)) #define vdso32_syscall() (0) -void enable_sep_cpu(void) -{ - int cpu = get_cpu(); - struct tss_struct *tss = &per_cpu(init_tss, cpu); - - if (!boot_cpu_has(X86_FEATURE_SEP)) { - put_cpu(); - return; - } - - tss->x86_tss.ss1 = __KERNEL_CS; - tss->x86_tss.sp1 = sizeof(struct tss_struct) + (unsigned long) tss; - wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); - wrmsr(MSR_IA32_SYSENTER_ESP, tss->x86_tss.sp1, 0); - wrmsr(MSR_IA32_SYSENTER_EIP, (unsigned long) ia32_sysenter_target, 0); - put_cpu(); -} - #endif /* CONFIG_X86_64 */ +#if defined(CONFIG_X86_32) || defined(CONFIG_COMPAT) +const struct vdso_image *selected_vdso32; +#endif + int __init sysenter_setup(void) { - char *vdso32_start, *vdso32_end; - int npages, i; - #ifdef CONFIG_COMPAT - if (vdso32_syscall()) { - vdso32_start = vdso32_syscall_start; - vdso32_end = vdso32_syscall_end; - vdso32_pages = vdso32_syscall_pages; - } else + if (vdso32_syscall()) + selected_vdso32 = &vdso_image_32_syscall; + else #endif - if (vdso32_sysenter()) { - vdso32_start = vdso32_sysenter_start; - vdso32_end = vdso32_sysenter_end; - vdso32_pages = vdso32_sysenter_pages; - } else { - vdso32_start = vdso32_int80_start; - vdso32_end = vdso32_int80_end; - vdso32_pages = vdso32_int80_pages; - } - - npages = ((vdso32_end - vdso32_start) + PAGE_SIZE - 1) / PAGE_SIZE; - vdso32_size = npages << PAGE_SHIFT; - for (i = 0; i < npages; i++) - vdso32_pages[i] = virt_to_page(vdso32_start + i*PAGE_SIZE); + if (vdso32_sysenter()) + selected_vdso32 = &vdso_image_32_sysenter; + else + selected_vdso32 = &vdso_image_32_int80; - patch_vdso32(vdso32_start, vdso32_size); + init_vdso_image(selected_vdso32); return 0; } -/* Setup a VMA at program startup for the vsyscall page */ -int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) -{ - struct mm_struct *mm = current->mm; - unsigned long addr; - int ret = 0; - struct vm_area_struct *vma; - -#ifdef CONFIG_X86_X32_ABI - if (test_thread_flag(TIF_X32)) - return x32_setup_additional_pages(bprm, uses_interp); -#endif - - if (vdso_enabled != 1) /* Other values all mean "disabled" */ - return 0; - - down_write(&mm->mmap_sem); - - addr = get_unmapped_area(NULL, 0, vdso32_size + VDSO_OFFSET(VDSO_PREV_PAGES), 0, 0); - if (IS_ERR_VALUE(addr)) { - ret = addr; - goto up_fail; - } - - addr += VDSO_OFFSET(VDSO_PREV_PAGES); - - current->mm->context.vdso = (void *)addr; - - /* - * MAYWRITE to allow gdb to COW and set breakpoints - */ - ret = install_special_mapping(mm, - addr, - vdso32_size, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, - vdso32_pages); - - if (ret) - goto up_fail; - - vma = _install_special_mapping(mm, - addr - VDSO_OFFSET(VDSO_PREV_PAGES), - VDSO_OFFSET(VDSO_PREV_PAGES), - VM_READ, - NULL); - - if (IS_ERR(vma)) { - ret = PTR_ERR(vma); - goto up_fail; - } - - ret = remap_pfn_range(vma, - addr - VDSO_OFFSET(VDSO_VVAR_PAGE), - __pa_symbol(&__vvar_page) >> PAGE_SHIFT, - PAGE_SIZE, - PAGE_READONLY); - - if (ret) - goto up_fail; - -#ifdef CONFIG_HPET_TIMER - if (hpet_address) { - ret = io_remap_pfn_range(vma, - addr - VDSO_OFFSET(VDSO_HPET_PAGE), - hpet_address >> PAGE_SHIFT, - PAGE_SIZE, - pgprot_noncached(PAGE_READONLY)); - - if (ret) - goto up_fail; - } -#endif - - current_thread_info()->sysenter_return = - VDSO32_SYMBOL(addr, SYSENTER_RETURN); - - up_fail: - if (ret) - current->mm->context.vdso = NULL; - - up_write(&mm->mmap_sem); - - return ret; -} - #ifdef CONFIG_X86_64 subsys_initcall(sysenter_setup); @@ -245,14 +92,7 @@ subsys_initcall(sysenter_setup); static struct ctl_table abi_table2[] = { { .procname = "vsyscall32", - .data = &sysctl_vsyscall32, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec - }, - { - .procname = "ldt16", - .data = &sysctl_ldt16, + .data = &vdso32_enabled, .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_dointvec @@ -279,13 +119,6 @@ __initcall(ia32_binfmt_init); #else /* CONFIG_X86_32 */ -const char *arch_vma_name(struct vm_area_struct *vma) -{ - if (vma->vm_mm && vma->vm_start == (long)vma->vm_mm->context.vdso) - return "[vdso]"; - return NULL; -} - struct vm_area_struct *get_gate_vma(struct mm_struct *mm) { return NULL; diff --git a/arch/x86/vdso/vdso32.S b/arch/x86/vdso/vdso32.S deleted file mode 100644 index 018bcd9f97b4..000000000000 --- a/arch/x86/vdso/vdso32.S +++ /dev/null @@ -1,9 +0,0 @@ -#include <asm/vdso.h> - -DEFINE_VDSO_IMAGE(vdso32_int80, "arch/x86/vdso/vdso32-int80.so") - -#ifdef CONFIG_COMPAT -DEFINE_VDSO_IMAGE(vdso32_syscall, "arch/x86/vdso/vdso32-syscall.so") -#endif - -DEFINE_VDSO_IMAGE(vdso32_sysenter, "arch/x86/vdso/vdso32-sysenter.so") diff --git a/arch/x86/vdso/vdso32/vdso32.lds.S b/arch/x86/vdso/vdso32/vdso32.lds.S index aadb8b9994cd..31056cf294bf 100644 --- a/arch/x86/vdso/vdso32/vdso32.lds.S +++ b/arch/x86/vdso/vdso32/vdso32.lds.S @@ -1,17 +1,14 @@ /* * Linker script for 32-bit vDSO. * We #include the file to define the layout details. - * Here we only choose the prelinked virtual address. * * This file defines the version script giving the user-exported symbols in - * the DSO. We can define local symbols here called VDSO* to make their - * values visible using the asm-x86/vdso.h macros from the kernel proper. + * the DSO. */ #include <asm/page.h> #define BUILD_VDSO32 -#define VDSO_PRELINK 0 #include "../vdso-layout.lds.S" @@ -38,13 +35,3 @@ VERSION local: *; }; } - -/* - * Symbols we define here called VDSO* get their values into vdso32-syms.h. - */ -VDSO32_vsyscall = __kernel_vsyscall; -VDSO32_sigreturn = __kernel_sigreturn; -VDSO32_rt_sigreturn = __kernel_rt_sigreturn; -VDSO32_clock_gettime = clock_gettime; -VDSO32_gettimeofday = gettimeofday; -VDSO32_time = time; diff --git a/arch/x86/vdso/vdsox32.S b/arch/x86/vdso/vdsox32.S deleted file mode 100644 index f4aa34e7f370..000000000000 --- a/arch/x86/vdso/vdsox32.S +++ /dev/null @@ -1,3 +0,0 @@ -#include <asm/vdso.h> - -DEFINE_VDSO_IMAGE(vdsox32, "arch/x86/vdso/vdsox32.so") diff --git a/arch/x86/vdso/vdsox32.lds.S b/arch/x86/vdso/vdsox32.lds.S index 62272aa2ae0a..46b991b578a8 100644 --- a/arch/x86/vdso/vdsox32.lds.S +++ b/arch/x86/vdso/vdsox32.lds.S @@ -1,14 +1,11 @@ /* * Linker script for x32 vDSO. * We #include the file to define the layout details. - * Here we only choose the prelinked virtual address. * * This file defines the version script giving the user-exported symbols in - * the DSO. We can define local symbols here called VDSO* to make their - * values visible using the asm-x86/vdso.h macros from the kernel proper. + * the DSO. */ -#define VDSO_PRELINK 0 #include "vdso-layout.lds.S" /* @@ -24,5 +21,3 @@ VERSION { local: *; }; } - -VDSOX32_PRELINK = VDSO_PRELINK; diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 1ad102613127..e1513c47872a 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -15,115 +15,51 @@ #include <asm/proto.h> #include <asm/vdso.h> #include <asm/page.h> +#include <asm/hpet.h> #if defined(CONFIG_X86_64) -unsigned int __read_mostly vdso_enabled = 1; +unsigned int __read_mostly vdso64_enabled = 1; -DECLARE_VDSO_IMAGE(vdso); extern unsigned short vdso_sync_cpuid; -static unsigned vdso_size; - -#ifdef CONFIG_X86_X32_ABI -DECLARE_VDSO_IMAGE(vdsox32); -static unsigned vdsox32_size; -#endif #endif -#if defined(CONFIG_X86_32) || defined(CONFIG_X86_X32_ABI) || \ - defined(CONFIG_COMPAT) -void __init patch_vdso32(void *vdso, size_t len) +void __init init_vdso_image(const struct vdso_image *image) { - Elf32_Ehdr *hdr = vdso; - Elf32_Shdr *sechdrs, *alt_sec = 0; - char *secstrings; - void *alt_data; int i; + int npages = (image->size) / PAGE_SIZE; - BUG_ON(len < sizeof(Elf32_Ehdr)); - BUG_ON(memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0); - - sechdrs = (void *)hdr + hdr->e_shoff; - secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - - for (i = 1; i < hdr->e_shnum; i++) { - Elf32_Shdr *shdr = &sechdrs[i]; - if (!strcmp(secstrings + shdr->sh_name, ".altinstructions")) { - alt_sec = shdr; - goto found; - } - } - - /* If we get here, it's probably a bug. */ - pr_warning("patch_vdso32: .altinstructions not found\n"); - return; /* nothing to patch */ + BUG_ON(image->size % PAGE_SIZE != 0); + for (i = 0; i < npages; i++) + image->text_mapping.pages[i] = + virt_to_page(image->data + i*PAGE_SIZE); -found: - alt_data = (void *)hdr + alt_sec->sh_offset; - apply_alternatives(alt_data, alt_data + alt_sec->sh_size); + apply_alternatives((struct alt_instr *)(image->data + image->alt), + (struct alt_instr *)(image->data + image->alt + + image->alt_len)); } -#endif #if defined(CONFIG_X86_64) -static void __init patch_vdso64(void *vdso, size_t len) -{ - Elf64_Ehdr *hdr = vdso; - Elf64_Shdr *sechdrs, *alt_sec = 0; - char *secstrings; - void *alt_data; - int i; - - BUG_ON(len < sizeof(Elf64_Ehdr)); - BUG_ON(memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0); - - sechdrs = (void *)hdr + hdr->e_shoff; - secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - - for (i = 1; i < hdr->e_shnum; i++) { - Elf64_Shdr *shdr = &sechdrs[i]; - if (!strcmp(secstrings + shdr->sh_name, ".altinstructions")) { - alt_sec = shdr; - goto found; - } - } - - /* If we get here, it's probably a bug. */ - pr_warning("patch_vdso64: .altinstructions not found\n"); - return; /* nothing to patch */ - -found: - alt_data = (void *)hdr + alt_sec->sh_offset; - apply_alternatives(alt_data, alt_data + alt_sec->sh_size); -} - static int __init init_vdso(void) { - int npages = (vdso_end - vdso_start + PAGE_SIZE - 1) / PAGE_SIZE; - int i; - - patch_vdso64(vdso_start, vdso_end - vdso_start); - - vdso_size = npages << PAGE_SHIFT; - for (i = 0; i < npages; i++) - vdso_pages[i] = virt_to_page(vdso_start + i*PAGE_SIZE); + init_vdso_image(&vdso_image_64); #ifdef CONFIG_X86_X32_ABI - patch_vdso32(vdsox32_start, vdsox32_end - vdsox32_start); - npages = (vdsox32_end - vdsox32_start + PAGE_SIZE - 1) / PAGE_SIZE; - vdsox32_size = npages << PAGE_SHIFT; - for (i = 0; i < npages; i++) - vdsox32_pages[i] = virt_to_page(vdsox32_start + i*PAGE_SIZE); + init_vdso_image(&vdso_image_x32); #endif return 0; } subsys_initcall(init_vdso); +#endif struct linux_binprm; /* Put the vdso above the (randomized) stack with another randomized offset. This way there is no hole in the middle of address space. To save memory make sure it is still in the same PTE as the stack top. - This doesn't give that many random bits */ + This doesn't give that many random bits. + + Only used for the 64-bit and x32 vdsos. */ static unsigned long vdso_addr(unsigned long start, unsigned len) { unsigned long addr, end; @@ -149,61 +85,149 @@ static unsigned long vdso_addr(unsigned long start, unsigned len) return addr; } -/* Setup a VMA at program startup for the vsyscall page. - Not called for compat tasks */ -static int setup_additional_pages(struct linux_binprm *bprm, - int uses_interp, - struct page **pages, - unsigned size) +static int map_vdso(const struct vdso_image *image, bool calculate_addr) { struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; unsigned long addr; - int ret; - - if (!vdso_enabled) - return 0; + int ret = 0; + static struct page *no_pages[] = {NULL}; + static struct vm_special_mapping vvar_mapping = { + .name = "[vvar]", + .pages = no_pages, + }; + + if (calculate_addr) { + addr = vdso_addr(current->mm->start_stack, + image->sym_end_mapping); + } else { + addr = 0; + } down_write(&mm->mmap_sem); - addr = vdso_addr(mm->start_stack, size); - addr = get_unmapped_area(NULL, addr, size, 0, 0); + + addr = get_unmapped_area(NULL, addr, image->sym_end_mapping, 0, 0); if (IS_ERR_VALUE(addr)) { ret = addr; goto up_fail; } - current->mm->context.vdso = (void *)addr; + current->mm->context.vdso = (void __user *)addr; - ret = install_special_mapping(mm, addr, size, - VM_READ|VM_EXEC| - VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, - pages); - if (ret) { - current->mm->context.vdso = NULL; + /* + * MAYWRITE to allow gdb to COW and set breakpoints + */ + vma = _install_special_mapping(mm, + addr, + image->size, + VM_READ|VM_EXEC| + VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, + &image->text_mapping); + + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); goto up_fail; } + vma = _install_special_mapping(mm, + addr + image->size, + image->sym_end_mapping - image->size, + VM_READ, + &vvar_mapping); + + if (IS_ERR(vma)) { + ret = PTR_ERR(vma); + goto up_fail; + } + + if (image->sym_vvar_page) + ret = remap_pfn_range(vma, + addr + image->sym_vvar_page, + __pa_symbol(&__vvar_page) >> PAGE_SHIFT, + PAGE_SIZE, + PAGE_READONLY); + + if (ret) + goto up_fail; + +#ifdef CONFIG_HPET_TIMER + if (hpet_address && image->sym_hpet_page) { + ret = io_remap_pfn_range(vma, + addr + image->sym_hpet_page, + hpet_address >> PAGE_SHIFT, + PAGE_SIZE, + pgprot_noncached(PAGE_READONLY)); + + if (ret) + goto up_fail; + } +#endif + up_fail: + if (ret) + current->mm->context.vdso = NULL; + up_write(&mm->mmap_sem); return ret; } +#if defined(CONFIG_X86_32) || defined(CONFIG_COMPAT) +static int load_vdso32(void) +{ + int ret; + + if (vdso32_enabled != 1) /* Other values all mean "disabled" */ + return 0; + + ret = map_vdso(selected_vdso32, false); + if (ret) + return ret; + + if (selected_vdso32->sym_VDSO32_SYSENTER_RETURN) + current_thread_info()->sysenter_return = + current->mm->context.vdso + + selected_vdso32->sym_VDSO32_SYSENTER_RETURN; + + return 0; +} +#endif + +#ifdef CONFIG_X86_64 int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { - return setup_additional_pages(bprm, uses_interp, vdso_pages, - vdso_size); + if (!vdso64_enabled) + return 0; + + return map_vdso(&vdso_image_64, true); } +#ifdef CONFIG_COMPAT +int compat_arch_setup_additional_pages(struct linux_binprm *bprm, + int uses_interp) +{ #ifdef CONFIG_X86_X32_ABI -int x32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) + if (test_thread_flag(TIF_X32)) { + if (!vdso64_enabled) + return 0; + + return map_vdso(&vdso_image_x32, true); + } +#endif + + return load_vdso32(); +} +#endif +#else +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) { - return setup_additional_pages(bprm, uses_interp, vdsox32_pages, - vdsox32_size); + return load_vdso32(); } #endif +#ifdef CONFIG_X86_64 static __init int vdso_setup(char *s) { - vdso_enabled = simple_strtoul(s, NULL, 0); + vdso64_enabled = simple_strtoul(s, NULL, 0); return 0; } __setup("vdso=", vdso_setup); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c34bfc4bbe7f..f17b29210ac4 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1339,6 +1339,7 @@ xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) static struct notifier_block xen_panic_block = { .notifier_call= xen_panic_event, + .priority = INT_MIN }; int xen_panic_handler_init(void) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 86e02eabb640..e8a1201c3293 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1494,7 +1494,7 @@ static int xen_pgd_alloc(struct mm_struct *mm) page->private = (unsigned long)user_pgd; if (user_pgd != NULL) { - user_pgd[pgd_index(VSYSCALL_START)] = + user_pgd[pgd_index(VSYSCALL_ADDR)] = __pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE); ret = 0; } @@ -2062,8 +2062,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) case FIX_KMAP_BEGIN ... FIX_KMAP_END: # endif #else - case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE: - case VVAR_PAGE: + case VSYSCALL_PAGE: #endif case FIX_TEXT_POKE0: case FIX_TEXT_POKE1: @@ -2104,8 +2103,7 @@ static void xen_set_fixmap(unsigned idx, phys_addr_t phys, pgprot_t prot) #ifdef CONFIG_X86_64 /* Replicate changes to map the vsyscall page into the user pagetable vsyscall mapping. */ - if ((idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) || - idx == VVAR_PAGE) { + if (idx == VSYSCALL_PAGE) { unsigned long vaddr = __fix_to_virt(idx); set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte); } @@ -2510,6 +2508,95 @@ void __init xen_hvm_init_mmu_ops(void) } #endif +#ifdef CONFIG_XEN_PVH +/* + * Map foreign gfn (fgfn), to local pfn (lpfn). This for the user + * space creating new guest on pvh dom0 and needing to map domU pages. + */ +static int xlate_add_to_p2m(unsigned long lpfn, unsigned long fgfn, + unsigned int domid) +{ + int rc, err = 0; + xen_pfn_t gpfn = lpfn; + xen_ulong_t idx = fgfn; + + struct xen_add_to_physmap_range xatp = { + .domid = DOMID_SELF, + .foreign_domid = domid, + .size = 1, + .space = XENMAPSPACE_gmfn_foreign, + }; + set_xen_guest_handle(xatp.idxs, &idx); + set_xen_guest_handle(xatp.gpfns, &gpfn); + set_xen_guest_handle(xatp.errs, &err); + + rc = HYPERVISOR_memory_op(XENMEM_add_to_physmap_range, &xatp); + if (rc < 0) + return rc; + return err; +} + +static int xlate_remove_from_p2m(unsigned long spfn, int count) +{ + struct xen_remove_from_physmap xrp; + int i, rc; + + for (i = 0; i < count; i++) { + xrp.domid = DOMID_SELF; + xrp.gpfn = spfn+i; + rc = HYPERVISOR_memory_op(XENMEM_remove_from_physmap, &xrp); + if (rc) + break; + } + return rc; +} + +struct xlate_remap_data { + unsigned long fgfn; /* foreign domain's gfn */ + pgprot_t prot; + domid_t domid; + int index; + struct page **pages; +}; + +static int xlate_map_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr, + void *data) +{ + int rc; + struct xlate_remap_data *remap = data; + unsigned long pfn = page_to_pfn(remap->pages[remap->index++]); + pte_t pteval = pte_mkspecial(pfn_pte(pfn, remap->prot)); + + rc = xlate_add_to_p2m(pfn, remap->fgfn, remap->domid); + if (rc) + return rc; + native_set_pte(ptep, pteval); + + return 0; +} + +static int xlate_remap_gfn_range(struct vm_area_struct *vma, + unsigned long addr, unsigned long mfn, + int nr, pgprot_t prot, unsigned domid, + struct page **pages) +{ + int err; + struct xlate_remap_data pvhdata; + + BUG_ON(!pages); + + pvhdata.fgfn = mfn; + pvhdata.prot = prot; + pvhdata.domid = domid; + pvhdata.index = 0; + pvhdata.pages = pages; + err = apply_to_page_range(vma->vm_mm, addr, nr << PAGE_SHIFT, + xlate_map_pte_fn, &pvhdata); + flush_tlb_all(); + return err; +} +#endif + #define REMAP_BATCH_SIZE 16 struct remap_data { @@ -2522,7 +2609,7 @@ static int remap_area_mfn_pte_fn(pte_t *ptep, pgtable_t token, unsigned long addr, void *data) { struct remap_data *rmd = data; - pte_t pte = pte_mkspecial(pfn_pte(rmd->mfn++, rmd->prot)); + pte_t pte = pte_mkspecial(mfn_pte(rmd->mfn++, rmd->prot)); rmd->mmu_update->ptr = virt_to_machine(ptep).maddr; rmd->mmu_update->val = pte_val_ma(pte); @@ -2544,13 +2631,18 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma, unsigned long range; int err = 0; - if (xen_feature(XENFEAT_auto_translated_physmap)) - return -EINVAL; - - prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP); - BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_IO)) == (VM_PFNMAP | VM_IO))); + if (xen_feature(XENFEAT_auto_translated_physmap)) { +#ifdef CONFIG_XEN_PVH + /* We need to update the local page tables and the xen HAP */ + return xlate_remap_gfn_range(vma, addr, mfn, nr, prot, + domid, pages); +#else + return -EINVAL; +#endif + } + rmd.mfn = mfn; rmd.prot = prot; @@ -2588,6 +2680,25 @@ int xen_unmap_domain_mfn_range(struct vm_area_struct *vma, if (!pages || !xen_feature(XENFEAT_auto_translated_physmap)) return 0; +#ifdef CONFIG_XEN_PVH + while (numpgs--) { + /* + * The mmu has already cleaned up the process mmu + * resources at this point (lookup_address will return + * NULL). + */ + unsigned long pfn = page_to_pfn(pages[numpgs]); + + xlate_remove_from_p2m(pfn, 1); + } + /* + * We don't need to flush tlbs because as part of + * xlate_remove_from_p2m, the hypervisor will do tlb flushes + * after removing the p2m entries from the EPT/NPT + */ + return 0; +#else return -EINVAL; +#endif } EXPORT_SYMBOL_GPL(xen_unmap_domain_mfn_range); diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 85e5d78c9874..9bb3d82ffec8 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -36,7 +36,7 @@ * pfn_to_mfn(0xc0000)=0xc0000 * * The benefit of this is, that we can assume for non-RAM regions (think - * PCI BARs, or ACPI spaces), we can create mappings easily b/c we + * PCI BARs, or ACPI spaces), we can create mappings easily because we * get the PFN value to match the MFN. * * For this to work efficiently we have one new page p2m_identity and @@ -60,7 +60,7 @@ * There is also a digram of the P2M at the end that can help. * Imagine your E820 looking as so: * - * 1GB 2GB + * 1GB 2GB 4GB * /-------------------+---------\/----\ /----------\ /---+-----\ * | System RAM | Sys RAM ||ACPI| | reserved | | Sys RAM | * \-------------------+---------/\----/ \----------/ \---+-----/ @@ -77,9 +77,8 @@ * of the PFN and the end PFN (263424 and 512256 respectively). The first step * is to reserve_brk a top leaf page if the p2m[1] is missing. The top leaf page * covers 512^2 of page estate (1GB) and in case the start or end PFN is not - * aligned on 512^2*PAGE_SIZE (1GB) we loop on aligned 1GB PFNs from start pfn - * to end pfn. We reserve_brk top leaf pages if they are missing (means they - * point to p2m_mid_missing). + * aligned on 512^2*PAGE_SIZE (1GB) we reserve_brk new middle and leaf pages as + * required to split any existing p2m_mid_missing middle pages. * * With the E820 example above, 263424 is not 1GB aligned so we allocate a * reserve_brk page which will cover the PFNs estate from 0x40000 to 0x80000. @@ -88,7 +87,7 @@ * Next stage is to determine if we need to do a more granular boundary check * on the 4MB (or 2MB depending on architecture) off the start and end pfn's. * We check if the start pfn and end pfn violate that boundary check, and if - * so reserve_brk a middle (p2m[x][y]) leaf page. This way we have a much finer + * so reserve_brk a (p2m[x][y]) leaf page. This way we have a much finer * granularity of setting which PFNs are missing and which ones are identity. * In our example 263424 and 512256 both fail the check so we reserve_brk two * pages. Populate them with INVALID_P2M_ENTRY (so they both have "missing" @@ -102,9 +101,10 @@ * * The next step is to walk from the start pfn to the end pfn setting * the IDENTITY_FRAME_BIT on each PFN. This is done in set_phys_range_identity. - * If we find that the middle leaf is pointing to p2m_missing we can swap it - * over to p2m_identity - this way covering 4MB (or 2MB) PFN space. At this - * point we do not need to worry about boundary aligment (so no need to + * If we find that the middle entry is pointing to p2m_missing we can swap it + * over to p2m_identity - this way covering 4MB (or 2MB) PFN space (and + * similarly swapping p2m_mid_missing for p2m_mid_identity for larger regions). + * At this point we do not need to worry about boundary aligment (so no need to * reserve_brk a middle page, figure out which PFNs are "missing" and which * ones are identity), as that has been done earlier. If we find that the * middle leaf is not occupied by p2m_identity or p2m_missing, we dereference @@ -118,6 +118,9 @@ * considered missing). In our case, p2m[1][2][0->255] and p2m[1][488][257->511] * contain the INVALID_P2M_ENTRY value and are considered "missing." * + * Finally, the region beyond the end of of the E820 (4 GB in this example) + * is set to be identity (in case there are MMIO regions placed here). + * * This is what the p2m ends up looking (for the E820 above) with this * fabulous drawing: * @@ -129,21 +132,27 @@ * |-----| \ | [p2m_identity]+\\ | .... | * | 2 |--\ \-------------------->| ... | \\ \----------------/ * |-----| \ \---------------/ \\ - * | 3 |\ \ \\ p2m_identity - * |-----| \ \-------------------->/---------------\ /-----------------\ - * | .. +->+ | [p2m_identity]+-->| ~0, ~0, ~0, ... | - * \-----/ / | [p2m_identity]+-->| ..., ~0 | - * / /---------------\ | .... | \-----------------/ - * / | IDENTITY[@0] | /-+-[x], ~0, ~0.. | - * / | IDENTITY[@256]|<----/ \---------------/ - * / | ~0, ~0, .... | - * | \---------------/ - * | - * p2m_mid_missing p2m_missing - * /-----------------\ /------------\ - * | [p2m_missing] +---->| ~0, ~0, ~0 | - * | [p2m_missing] +---->| ..., ~0 | - * \-----------------/ \------------/ + * | 3 |-\ \ \\ p2m_identity [1] + * |-----| \ \-------------------->/---------------\ /-----------------\ + * | .. |\ | | [p2m_identity]+-->| ~0, ~0, ~0, ... | + * \-----/ | | | [p2m_identity]+-->| ..., ~0 | + * | | | .... | \-----------------/ + * | | +-[x], ~0, ~0.. +\ + * | | \---------------/ \ + * | | \-> /---------------\ + * | V p2m_mid_missing p2m_missing | IDENTITY[@0] | + * | /-----------------\ /------------\ | IDENTITY[@256]| + * | | [p2m_missing] +---->| ~0, ~0, ...| | ~0, ~0, .... | + * | | [p2m_missing] +---->| ..., ~0 | \---------------/ + * | | ... | \------------/ + * | \-----------------/ + * | + * | p2m_mid_identity + * | /-----------------\ + * \-->| [p2m_identity] +---->[1] + * | [p2m_identity] +---->[1] + * | ... | + * \-----------------/ * * where ~0 is INVALID_P2M_ENTRY. IDENTITY is (PFN | IDENTITY_BIT) */ @@ -187,13 +196,15 @@ static RESERVE_BRK_ARRAY(unsigned long, p2m_top_mfn, P2M_TOP_PER_PAGE); static RESERVE_BRK_ARRAY(unsigned long *, p2m_top_mfn_p, P2M_TOP_PER_PAGE); static RESERVE_BRK_ARRAY(unsigned long, p2m_identity, P2M_PER_PAGE); +static RESERVE_BRK_ARRAY(unsigned long *, p2m_mid_identity, P2M_MID_PER_PAGE); +static RESERVE_BRK_ARRAY(unsigned long, p2m_mid_identity_mfn, P2M_MID_PER_PAGE); RESERVE_BRK(p2m_mid, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID_PER_PAGE))); RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID_PER_PAGE))); /* We might hit two boundary violations at the start and end, at max each * boundary violation will require three middle nodes. */ -RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); +RESERVE_BRK(p2m_mid_extra, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. @@ -242,20 +253,20 @@ static void p2m_top_mfn_p_init(unsigned long **top) top[i] = p2m_mid_missing_mfn; } -static void p2m_mid_init(unsigned long **mid) +static void p2m_mid_init(unsigned long **mid, unsigned long *leaf) { unsigned i; for (i = 0; i < P2M_MID_PER_PAGE; i++) - mid[i] = p2m_missing; + mid[i] = leaf; } -static void p2m_mid_mfn_init(unsigned long *mid) +static void p2m_mid_mfn_init(unsigned long *mid, unsigned long *leaf) { unsigned i; for (i = 0; i < P2M_MID_PER_PAGE; i++) - mid[i] = virt_to_mfn(p2m_missing); + mid[i] = virt_to_mfn(leaf); } static void p2m_init(unsigned long *p2m) @@ -286,7 +297,9 @@ void __ref xen_build_mfn_list_list(void) /* Pre-initialize p2m_top_mfn to be completely missing */ if (p2m_top_mfn == NULL) { p2m_mid_missing_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_mfn_init(p2m_mid_missing_mfn); + p2m_mid_mfn_init(p2m_mid_missing_mfn, p2m_missing); + p2m_mid_identity_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE); + p2m_mid_mfn_init(p2m_mid_identity_mfn, p2m_identity); p2m_top_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE); p2m_top_mfn_p_init(p2m_top_mfn_p); @@ -295,7 +308,8 @@ void __ref xen_build_mfn_list_list(void) p2m_top_mfn_init(p2m_top_mfn); } else { /* Reinitialise, mfn's all change after migration */ - p2m_mid_mfn_init(p2m_mid_missing_mfn); + p2m_mid_mfn_init(p2m_mid_missing_mfn, p2m_missing); + p2m_mid_mfn_init(p2m_mid_identity_mfn, p2m_identity); } for (pfn = 0; pfn < xen_max_p2m_pfn; pfn += P2M_PER_PAGE) { @@ -327,7 +341,7 @@ void __ref xen_build_mfn_list_list(void) * it too late. */ mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_mfn_init(mid_mfn_p); + p2m_mid_mfn_init(mid_mfn_p, p2m_missing); p2m_top_mfn_p[topidx] = mid_mfn_p; } @@ -365,16 +379,17 @@ void __init xen_build_dynamic_phys_to_machine(void) p2m_missing = extend_brk(PAGE_SIZE, PAGE_SIZE); p2m_init(p2m_missing); + p2m_identity = extend_brk(PAGE_SIZE, PAGE_SIZE); + p2m_init(p2m_identity); p2m_mid_missing = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_init(p2m_mid_missing); + p2m_mid_init(p2m_mid_missing, p2m_missing); + p2m_mid_identity = extend_brk(PAGE_SIZE, PAGE_SIZE); + p2m_mid_init(p2m_mid_identity, p2m_identity); p2m_top = extend_brk(PAGE_SIZE, PAGE_SIZE); p2m_top_init(p2m_top); - p2m_identity = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_init(p2m_identity); - /* * The domain builder gives us a pre-constructed p2m array in * mfn_list for all the pages initially given to us, so we just @@ -386,7 +401,7 @@ void __init xen_build_dynamic_phys_to_machine(void) if (p2m_top[topidx] == p2m_mid_missing) { unsigned long **mid = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_init(mid); + p2m_mid_init(mid, p2m_missing); p2m_top[topidx] = mid; } @@ -492,7 +507,7 @@ unsigned long get_phys_to_machine(unsigned long pfn) unsigned topidx, mididx, idx; if (unlikely(pfn >= MAX_P2M_PFN)) - return INVALID_P2M_ENTRY; + return IDENTITY_FRAME(pfn); topidx = p2m_top_index(pfn); mididx = p2m_mid_index(pfn); @@ -545,7 +560,7 @@ static bool alloc_p2m(unsigned long pfn) if (!mid) return false; - p2m_mid_init(mid); + p2m_mid_init(mid, p2m_missing); if (cmpxchg(top_p, p2m_mid_missing, mid) != p2m_mid_missing) free_p2m_page(mid); @@ -565,7 +580,7 @@ static bool alloc_p2m(unsigned long pfn) if (!mid_mfn) return false; - p2m_mid_mfn_init(mid_mfn); + p2m_mid_mfn_init(mid_mfn, p2m_missing); missing_mfn = virt_to_mfn(p2m_mid_missing_mfn); mid_mfn_mfn = virt_to_mfn(mid_mfn); @@ -596,7 +611,7 @@ static bool alloc_p2m(unsigned long pfn) return true; } -static bool __init early_alloc_p2m_middle(unsigned long pfn, bool check_boundary) +static bool __init early_alloc_p2m(unsigned long pfn, bool check_boundary) { unsigned topidx, mididx, idx; unsigned long *p2m; @@ -638,7 +653,7 @@ static bool __init early_alloc_p2m_middle(unsigned long pfn, bool check_boundary return true; } -static bool __init early_alloc_p2m(unsigned long pfn) +static bool __init early_alloc_p2m_middle(unsigned long pfn) { unsigned topidx = p2m_top_index(pfn); unsigned long *mid_mfn_p; @@ -649,7 +664,7 @@ static bool __init early_alloc_p2m(unsigned long pfn) if (mid == p2m_mid_missing) { mid = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_init(mid); + p2m_mid_init(mid, p2m_missing); p2m_top[topidx] = mid; @@ -658,12 +673,12 @@ static bool __init early_alloc_p2m(unsigned long pfn) /* And the save/restore P2M tables.. */ if (mid_mfn_p == p2m_mid_missing_mfn) { mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE); - p2m_mid_mfn_init(mid_mfn_p); + p2m_mid_mfn_init(mid_mfn_p, p2m_missing); p2m_top_mfn_p[topidx] = mid_mfn_p; p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p); /* Note: we don't set mid_mfn_p[midix] here, - * look in early_alloc_p2m_middle */ + * look in early_alloc_p2m() */ } return true; } @@ -739,7 +754,7 @@ found: /* This shouldn't happen */ if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) - early_alloc_p2m(set_pfn); + early_alloc_p2m_middle(set_pfn); if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) return false; @@ -754,13 +769,13 @@ found: bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { - if (!early_alloc_p2m(pfn)) + if (!early_alloc_p2m_middle(pfn)) return false; if (early_can_reuse_p2m_middle(pfn, mfn)) return __set_phys_to_machine(pfn, mfn); - if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) + if (!early_alloc_p2m(pfn, false /* boundary crossover OK!*/)) return false; if (!__set_phys_to_machine(pfn, mfn)) @@ -769,12 +784,30 @@ bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) return true; } + +static void __init early_split_p2m(unsigned long pfn) +{ + unsigned long mididx, idx; + + mididx = p2m_mid_index(pfn); + idx = p2m_index(pfn); + + /* + * Allocate new middle and leaf pages if this pfn lies in the + * middle of one. + */ + if (mididx || idx) + early_alloc_p2m_middle(pfn); + if (idx) + early_alloc_p2m(pfn, false); +} + unsigned long __init set_phys_range_identity(unsigned long pfn_s, unsigned long pfn_e) { unsigned long pfn; - if (unlikely(pfn_s >= MAX_P2M_PFN || pfn_e >= MAX_P2M_PFN)) + if (unlikely(pfn_s >= MAX_P2M_PFN)) return 0; if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) @@ -783,19 +816,30 @@ unsigned long __init set_phys_range_identity(unsigned long pfn_s, if (pfn_s > pfn_e) return 0; - for (pfn = (pfn_s & ~(P2M_MID_PER_PAGE * P2M_PER_PAGE - 1)); - pfn < ALIGN(pfn_e, (P2M_MID_PER_PAGE * P2M_PER_PAGE)); - pfn += P2M_MID_PER_PAGE * P2M_PER_PAGE) - { - WARN_ON(!early_alloc_p2m(pfn)); - } + if (pfn_e > MAX_P2M_PFN) + pfn_e = MAX_P2M_PFN; - early_alloc_p2m_middle(pfn_s, true); - early_alloc_p2m_middle(pfn_e, true); + early_split_p2m(pfn_s); + early_split_p2m(pfn_e); + + for (pfn = pfn_s; pfn < pfn_e;) { + unsigned topidx = p2m_top_index(pfn); + unsigned mididx = p2m_mid_index(pfn); - for (pfn = pfn_s; pfn < pfn_e; pfn++) if (!__set_phys_to_machine(pfn, IDENTITY_FRAME(pfn))) break; + pfn++; + + /* + * If the PFN was set to a middle or leaf identity + * page the remainder must also be identity, so skip + * ahead to the next middle or leaf entry. + */ + if (p2m_top[topidx] == p2m_mid_identity) + pfn = ALIGN(pfn, P2M_MID_PER_PAGE * P2M_PER_PAGE); + else if (p2m_top[topidx][mididx] == p2m_identity) + pfn = ALIGN(pfn, P2M_PER_PAGE); + } if (!WARN((pfn - pfn_s) != (pfn_e - pfn_s), "Identity mapping failed. We are %ld short of 1-1 mappings!\n", @@ -825,8 +869,22 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) /* For sparse holes were the p2m leaf has real PFN along with * PCI holes, stick in the PFN as the MFN value. + * + * set_phys_range_identity() will have allocated new middle + * and leaf pages as required so an existing p2m_mid_missing + * or p2m_missing mean that whole range will be identity so + * these can be switched to p2m_mid_identity or p2m_identity. */ if (mfn != INVALID_P2M_ENTRY && (mfn & IDENTITY_FRAME_BIT)) { + if (p2m_top[topidx] == p2m_mid_identity) + return true; + + if (p2m_top[topidx] == p2m_mid_missing) { + WARN_ON(cmpxchg(&p2m_top[topidx], p2m_mid_missing, + p2m_mid_identity) != p2m_mid_missing); + return true; + } + if (p2m_top[topidx][mididx] == p2m_identity) return true; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 0982233b9b84..821a11ada590 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -89,10 +89,10 @@ static void __init xen_add_extra_mem(u64 start, u64 size) for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { unsigned long mfn = pfn_to_mfn(pfn); - if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + if (WARN_ONCE(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) continue; - WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", - pfn, mfn); + WARN_ONCE(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); } @@ -469,6 +469,15 @@ char * __init xen_memory_setup(void) } /* + * Set the rest as identity mapped, in case PCI BARs are + * located here. + * + * PFNs above MAX_P2M_PFN are considered identity mapped as + * well. + */ + set_phys_range_identity(map[i-1].addr / PAGE_SIZE, ~0ul); + + /* * In domU, the ISA region is normal, usable memory, but we * reserve ISA memory anyway because too many things poke * about in there. @@ -516,10 +525,17 @@ char * __init xen_memory_setup(void) static void __init fiddle_vdso(void) { #ifdef CONFIG_X86_32 + /* + * This could be called before selected_vdso32 is initialized, so + * just fiddle with both possible images. vdso_image_32_syscall + * can't be selected, since it only exists on 64-bit systems. + */ u32 *mask; - mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK); + mask = vdso_image_32_int80.data + + vdso_image_32_int80.sym_VDSO32_NOTE_MASK; *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT; - mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK); + mask = vdso_image_32_sysenter.data + + vdso_image_32_sysenter.sym_VDSO32_NOTE_MASK; *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT; #endif } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 45329c8c226e..c4df9dbd63b7 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -12,8 +12,10 @@ #include "xen-ops.h" #include "mmu.h" -void xen_arch_pre_suspend(void) +static void xen_pv_pre_suspend(void) { + xen_mm_pin_all(); + xen_start_info->store_mfn = mfn_to_pfn(xen_start_info->store_mfn); xen_start_info->console.domU.mfn = mfn_to_pfn(xen_start_info->console.domU.mfn); @@ -26,7 +28,7 @@ void xen_arch_pre_suspend(void) BUG(); } -void xen_arch_hvm_post_suspend(int suspend_cancelled) +static void xen_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; @@ -41,7 +43,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) #endif } -void xen_arch_post_suspend(int suspend_cancelled) +static void xen_pv_post_suspend(int suspend_cancelled) { xen_build_mfn_list_list(); @@ -60,6 +62,21 @@ void xen_arch_post_suspend(int suspend_cancelled) xen_vcpu_restore(); } + xen_mm_unpin_all(); +} + +void xen_arch_pre_suspend(void) +{ + if (xen_pv_domain()) + xen_pv_pre_suspend(); +} + +void xen_arch_post_suspend(int cancelled) +{ + if (xen_pv_domain()) + xen_pv_post_suspend(cancelled); + else + xen_hvm_post_suspend(cancelled); } static void xen_vcpu_notify_restore(void *data) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1cb6f4c37300..c834d4b231f0 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -31,6 +31,8 @@ void xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn); void xen_reserve_top(void); extern unsigned long xen_max_p2m_pfn; +void xen_mm_pin_all(void); +void xen_mm_unpin_all(void); void xen_set_pat(u64); char * __init xen_memory_setup(void); diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h index e7fb447bce8e..e5103b47a8ce 100644 --- a/arch/xtensa/include/asm/atomic.h +++ b/arch/xtensa/include/asm/atomic.h @@ -19,6 +19,7 @@ #ifdef __KERNEL__ #include <asm/processor.h> #include <asm/cmpxchg.h> +#include <asm/barrier.h> #define ATOMIC_INIT(i) { (i) } @@ -387,12 +388,6 @@ static inline void atomic_set_mask(unsigned int mask, atomic_t *v) #endif } -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - #endif /* __KERNEL__ */ #endif /* _XTENSA_ATOMIC_H */ diff --git a/arch/xtensa/include/asm/barrier.h b/arch/xtensa/include/asm/barrier.h index 0a24b04d6b21..5b88774c75ab 100644 --- a/arch/xtensa/include/asm/barrier.h +++ b/arch/xtensa/include/asm/barrier.h @@ -13,6 +13,9 @@ #define rmb() barrier() #define wmb() mb() +#define smp_mb__before_atomic() barrier() +#define smp_mb__after_atomic() barrier() + #include <asm-generic/barrier.h> #endif /* _XTENSA_SYSTEM_H */ diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h index 7b6873ae84c2..3f44fa2a53e9 100644 --- a/arch/xtensa/include/asm/bitops.h +++ b/arch/xtensa/include/asm/bitops.h @@ -21,9 +21,7 @@ #include <asm/processor.h> #include <asm/byteorder.h> - -#define smp_mb__before_clear_bit() smp_mb() -#define smp_mb__after_clear_bit() smp_mb() +#include <asm/barrier.h> #include <asm-generic/bitops/non-atomic.h> diff --git a/arch/xtensa/include/asm/pci.h b/arch/xtensa/include/asm/pci.h index 614be031a79a..5d52dc43dfe7 100644 --- a/arch/xtensa/include/asm/pci.h +++ b/arch/xtensa/include/asm/pci.h @@ -22,11 +22,6 @@ extern struct pci_controller* pcibios_alloc_controller(void); -static inline void pcibios_penalize_isa_irq(int irq) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - /* Assume some values. (We should revise them, if necessary) */ #define PCIBIOS_MIN_IO 0x2000 diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 9757bb74e532..06370ccea9e9 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -74,7 +74,6 @@ extern int initrd_below_start_ok; #endif #ifdef CONFIG_OF -extern u32 __dtb_start[]; void *dtb_start = __dtb_start; #endif @@ -199,7 +198,7 @@ static int __init xtensa_dt_io_area(unsigned long node, const char *uname, int depth, void *data) { const __be32 *ranges; - unsigned long len; + int len; if (depth > 1) return 0; |