diff options
Diffstat (limited to 'arch')
323 files changed, 3208 insertions, 3233 deletions
diff --git a/arch/alpha/include/asm/mmzone.h b/arch/alpha/include/asm/mmzone.h index 8af56ce346ad..445dc42e0334 100644 --- a/arch/alpha/include/asm/mmzone.h +++ b/arch/alpha/include/asm/mmzone.h @@ -56,7 +56,6 @@ PLAT_NODE_DATA_LOCALNR(unsigned long p, int n) * Given a kernel address, find the home node of the underlying memory. */ #define kvaddr_to_nid(kaddr) pa_to_nid(__pa(kaddr)) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) /* * Given a kaddr, LOCAL_BASE_ADDR finds the owning node of the memory diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 376f22130791..326f0a2d56e5 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -409,7 +409,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen) return -EFAULT; len = namelen; - if (namelen > 32) + if (len > 32) len = 32; down_read(&uts_sem); @@ -594,7 +594,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) down_read(&uts_sem); res = sysinfo_table[offset]; len = strlen(res)+1; - if (len > count) + if ((unsigned long)len > (unsigned long)count) len = count; if (copy_to_user(buf, res, len)) err = -EFAULT; @@ -649,7 +649,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, return 1; case GSI_GET_HWRPB: - if (nbytes < sizeof(*hwrpb)) + if (nbytes > sizeof(*hwrpb)) return -EINVAL; if (copy_to_user(buffer, hwrpb, nbytes) != 0) return -EFAULT; @@ -1008,6 +1008,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, { struct rusage r; long ret, err; + unsigned int status = 0; mm_segment_t old_fs; if (!ur) @@ -1016,13 +1017,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, old_fs = get_fs(); set_fs (KERNEL_DS); - ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r); + ret = sys_wait4(pid, (unsigned int __user *) &status, options, + (struct rusage __user *) &r); set_fs (old_fs); if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur))) return -EFAULT; err = 0; + err |= put_user(status, ustatus); err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec); err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec); err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec); diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da41921c52..940b20178107 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -597,6 +597,8 @@ __common_mmu_cache_on: sub pc, lr, r0, lsr #32 @ properly flush pipeline #endif +#define PROC_ENTRY_SIZE (4*5) + /* * Here follow the relocatable cache support functions for the * various processors. This is a generic hook for locating an @@ -624,7 +626,7 @@ call_cache_fn: adr r12, proc_types ARM( addeq pc, r12, r3 ) @ call cache function THUMB( addeq r12, r3 ) THUMB( moveq pc, r12 ) @ call cache function - add r12, r12, #4*5 + add r12, r12, #PROC_ENTRY_SIZE b 1b /* @@ -691,9 +693,9 @@ proc_types: .word 0x41069260 @ ARM926EJ-S (v5TEJ) .word 0xff0ffff0 - b __arm926ejs_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __arm926ejs_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush .word 0x00007000 @ ARM7 IDs .word 0x0000f000 @@ -794,6 +796,16 @@ proc_types: .size proc_types, . - proc_types + /* + * If you get a "non-constant expression in ".if" statement" + * error from the assembler on this line, check that you have + * not accidentally written a "b" instruction where you should + * have written W(b). + */ + .if (. - proc_types) % PROC_ENTRY_SIZE != 0 + .error "The size of one or more proc_types entries is wrong." + .endif + /* * Turn off the Cache and MMU. ARMv3 does not support * reading the control register, but ARMv4 does. diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index e5681636626f..841df7d21c2f 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -255,7 +255,7 @@ static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, if (buf == 0) { dev_err(dev, "%s: unable to map unsafe buffer %p!\n", __func__, ptr); - return 0; + return ~0; } dev_dbg(dev, diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 889922ad229c..67b5abb6f857 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 47ad3b1a4fee..5a584520db2f 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MMP=y +CONFIG_MACH_BROWNSTONE=y CONFIG_MACH_FLINT=y CONFIG_MACH_MARVELL_JASPER=y CONFIG_HIGH_RES_TIMERS=y @@ -63,10 +64,16 @@ CONFIG_BACKLIGHT_MAX8925=y # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y +CONFIG_MMC=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y @@ -81,7 +88,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DYNAMIC_DEBUG=y +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 316af5479d90..9c0ad7993986 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 8b0c717378fa..1d01ddd33122 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_SA1100=m CONFIG_EXT2_FS=m diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 5b5504143647..721832ffe2d7 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=m CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 960f65514d88..59577ad3f4ef 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_PXA=m CONFIG_EXT2_FS=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index bc2d2d75f706..65c3f2474f5e 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -13,6 +13,9 @@ * Do not include any C declarations in this file - it is included by * assembler source. */ +#ifndef __ASM_ASSEMBLER_H__ +#define __ASM_ASSEMBLER_H__ + #ifndef __ASSEMBLY__ #error "Only include this from assembly code" #endif @@ -290,3 +293,4 @@ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm +#endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index ec0bbf79c71f..2da8547de6d6 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -1,3 +1,5 @@ +#include <asm/assembler.h> + /* * Interrupt handling. Preserves r7, r8, r9 */ diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index a701e4226a6c..0cdd7b456cb2 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; + if (!dt_phys) + return NULL; + devtree = phys_to_virt(dt_phys); /* check device tree validity */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e8d885676807..90c62cd51ca9 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -435,6 +435,10 @@ __irq_usr: usr_entry kuser_cmpxchg_check +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -453,7 +457,7 @@ __irq_usr: #endif mov why, #0 - b ret_to_user + b ret_to_user_from_irq UNWIND(.fnend ) ENDPROC(__irq_usr) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 1e7b04a40a31..b2a27b6b0046 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -64,6 +64,7 @@ work_resched: ENTRY(ret_to_user) ret_slow_syscall: disable_irq @ disable interrupts +ENTRY(ret_to_user_from_irq) ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne work_pending @@ -75,6 +76,7 @@ no_work_pending: arch_ret_to_user r1, lr restore_user_regs fast = 0, offset = 0 +ENDPROC(ret_to_user_from_irq) ENDPROC(ret_to_user) /* diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index fee7c36349eb..016d6a0830a3 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -193,8 +193,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; - /* only Thumb addresses allowed (no interworking) */ - if (!(offset & 1) || + /* + * For function symbols, only Thumb addresses are + * allowed (no interworking). + * + * For non-function symbols, the destination + * has no specific ARM/Thumb disposition, so + * the branch is resolved under the assumption + * that interworking is not required. + */ + if ((ELF32_ST_TYPE(sym->st_info) == STT_FUNC && + !(offset & 1)) || offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index d53c0abc4dd3..2b5b1421596c 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -583,7 +583,7 @@ static int armpmu_event_init(struct perf_event *event) static void armpmu_enable(struct pmu *pmu) { /* Enable all of the perf events on hardware. */ - int idx; + int idx, enabled = 0; struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); if (!armpmu) @@ -596,9 +596,11 @@ static void armpmu_enable(struct pmu *pmu) continue; armpmu->enable(&event->hw, idx); + enabled = 1; } - armpmu->start(); + if (enabled) + armpmu->start(); } static void armpmu_disable(struct pmu *pmu) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ed11fb08b05a..acbb447ac6b5 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -73,6 +73,7 @@ __setup("fpe=", fpe_setup); #endif extern void paging_init(struct machine_desc *desc); +extern void sanity_check_meminfo(void); extern void reboot_setup(char *str); unsigned int processor_id; @@ -900,6 +901,7 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); + sanity_check_meminfo(); arm_memblock_init(&meminfo, mdesc); paging_init(mdesc); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 344e52b16c8c..e7f92a4321f3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -318,9 +318,13 @@ asmlinkage void __cpuinit secondary_start_kernel(void) smp_store_cpu_info(cpu); /* - * OK, now it's safe to let the boot CPU continue + * OK, now it's safe to let the boot CPU continue. Wait for + * the CPU migration code to notice that the CPU is online + * before we continue. */ set_cpu_online(cpu, true); + while (!cpu_active(cpu)) + cpu_relax(); /* * OK, it's off to the idle thread for us diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 60636f499cb3..2c277d40cee6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -115,7 +115,7 @@ static void __cpuinit twd_calibrate_rate(void) twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5); printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000, - (twd_timer_rate / 1000000) % 100); + (twd_timer_rate / 10000) % 100); } } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index d52eec268b47..6807cb1e76dd 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - for (i = -4; i < 1; i++) { + for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) @@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte)) { + if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 17fae4a42ab5..f1013d08bb57 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -223,15 +223,15 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index cd850ed6f335..dba0d8d8a4bd 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1220,7 +1220,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91cap9_set_console_clock(portnr); + at91cap9_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index b228ce9e21a1..83a1a3fee554 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -199,9 +199,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index a0ba475be04c..7227755ffec6 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1135,7 +1135,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91rm9200_set_console_clock(portnr); + at91rm9200_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 1fdeb9058a76..39f81f47b4ba 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1173,7 +1173,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9260_set_console_clock(portnr); + at91sam9260_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 3eb4538fceeb..5004bf0a05f2 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -1013,7 +1013,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9261_set_console_clock(portnr); + at91sam9261_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ffe081b77ed0..a050f41fc860 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1395,7 +1395,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9263_set_console_clock(portnr); + at91sam9263_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 2bb6ff9af1c7..11e214121b23 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -217,11 +217,11 @@ static struct clk *periph_clocks[] __initdata = { static struct clk_lookup periph_clocks_lookups[] = { /* One additional fake clock for ohci */ CLKDEV_CON_ID("ohci_clk", &uhphs_clk), - CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 05674865bc21..600bffb01edb 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1550,7 +1550,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9g45_set_console_clock(portnr); + at91sam9g45_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 1a40f16b66c8..29dff18ed130 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -191,8 +191,8 @@ static struct clk *periph_clocks[] __initdata = { }; static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), - CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c296045f2b6a..aacb19dc9225 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1168,7 +1168,7 @@ void __init at91_set_serial_console(unsigned portnr) { if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; - at91sam9rl_set_console_clock(portnr); + at91sam9rl_set_console_clock(at91_uarts[portnr]->id); } } diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 1904fdf87613..cdb65d483250 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -215,7 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); - cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); + cap9adk_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index d600dc123227..5c240743c5b7 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -214,7 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index f897f84d43dc..b60c22b6e241 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -220,7 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 605b26f40a4c..9bbdc92ea194 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -221,7 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 7624cf0d006b..1325a50101a8 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -198,7 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 063c95d0e8f0..33eaa135f248 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -178,7 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); + ek_nand_data.bus_width_16 = board_have_nand_16bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h deleted file mode 100644 index 02182c16a022..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_mci.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision F. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_MCI_H -#define AT91_MCI_H - -#define AT91_MCI_CR 0x00 /* Control Register */ -#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ -#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ -#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ -#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ -#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_MCI_MR 0x04 /* Mode Register */ -#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ -#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ -#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ -#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ -#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ -#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ - -#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ -#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ -#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ -#define AT91_MCI_DTOMUL_1 (0 << 4) -#define AT91_MCI_DTOMUL_16 (1 << 4) -#define AT91_MCI_DTOMUL_128 (2 << 4) -#define AT91_MCI_DTOMUL_256 (3 << 4) -#define AT91_MCI_DTOMUL_1K (4 << 4) -#define AT91_MCI_DTOMUL_4K (5 << 4) -#define AT91_MCI_DTOMUL_64K (6 << 4) -#define AT91_MCI_DTOMUL_1M (7 << 4) - -#define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ - -#define AT91_MCI_ARGR 0x10 /* Argument Register */ - -#define AT91_MCI_CMDR 0x14 /* Command Register */ -#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ -#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ -#define AT91_MCI_RSPTYP_NONE (0 << 6) -#define AT91_MCI_RSPTYP_48 (1 << 6) -#define AT91_MCI_RSPTYP_136 (2 << 6) -#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ -#define AT91_MCI_SPCMD_NONE (0 << 8) -#define AT91_MCI_SPCMD_INIT (1 << 8) -#define AT91_MCI_SPCMD_SYNC (2 << 8) -#define AT91_MCI_SPCMD_ICMD (4 << 8) -#define AT91_MCI_SPCMD_IRESP (5 << 8) -#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ -#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ -#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ -#define AT91_MCI_TRCMD_NONE (0 << 16) -#define AT91_MCI_TRCMD_START (1 << 16) -#define AT91_MCI_TRCMD_STOP (2 << 16) -#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ -#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ -#define AT91_MCI_TRTYP_BLOCK (0 << 19) -#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) -#define AT91_MCI_TRTYP_STREAM (2 << 19) -#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) -#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) - -#define AT91_MCI_BLKR 0x18 /* Block Register */ -#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */ - -#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ -#define AT91_MCR_RDR 0x30 /* Receive Data Register */ -#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ - -#define AT91_MCI_SR 0x40 /* Status Register */ -#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ -#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ -#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ -#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ -#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ -#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ -#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ -#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ -#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ -#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ -#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ -#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ -#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ -#define AT91_MCI_OVRE (1 << 30) /* Overrun */ -#define AT91_MCI_UNRE (1 << 31) /* Underrun */ - -#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ -#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index b855ee75f72c..8f4866045b41 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -13,13 +13,13 @@ * the 16-31 bit are reserved for at91 generic information * * bit 31: - * 0 => nand 16 bit - * 1 => nand 8 bit + * 0 => nand 8 bit + * 1 => nand 16 bit */ -#define BOARD_HAVE_NAND_8BIT (1 << 31) -static int inline board_have_nand_8bit(void) +#define BOARD_HAVE_NAND_16BIT (1 << 31) +static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_8BIT; + return system_rev & BOARD_HAVE_NAND_16BIT; } #endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index c67f684ee3e5..09a87e61ffcf 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -520,7 +520,7 @@ fail: */ if (have_imager()) { label = "HD imager"; - mux |= 1; + mux |= 2; /* externally mux MMC1/ENET/AIC33 to imager */ mux |= BIT(6) | BIT(5) | BIT(3); @@ -540,7 +540,7 @@ fail: resets &= ~BIT(1); if (have_tvp7002()) { - mux |= 2; + mux |= 1; resets &= ~BIT(2); label = "tvp7002 HD"; } else { diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 606a6f27ed6c..5f5d78308873 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 4e66881c7aee..fc4e98ea7543 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8f4f736aa267..806a2f02b980 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -298,7 +298,7 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1e0f809644bb..e00d61e2efbe 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index a0b838894ac9..cafbe13a82a5 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -252,8 +252,12 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct davinci_gpio_regs __iomem *g = irq2regs(irq); + struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + struct davinci_gpio_controller *d; + + d = (struct davinci_gpio_controller *)irq_desc_get_handler_data(desc); + g = (struct davinci_gpio_regs __iomem *)d->regs; /* we only care about one bank */ if (irq & 1) @@ -272,11 +276,14 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) if (!status) break; __raw_writel(status, &g->intstat); - if (irq & 1) - status >>= 16; /* now demux them to the right lowlevel handler */ - n = (int)irq_get_handler_data(irq); + n = d->irq_base; + if (irq & 1) { + n += 16; + status >>= 16; + } + while (status) { res = ffs(status); n += res; @@ -422,8 +429,13 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_chip_data(bank_irq, (__force void *)g); - irq_set_handler_data(bank_irq, (void *)irq); + + /* + * Each chip handles 32 gpios, and each irq bank consists of 16 + * gpio irqs. Pass the irq bank's corresponding controller to + * the chained irq handler. + */ + irq_set_handler_data(bank_irq, &chips[gpio / 32]); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index bfe68ec4e1a6..952dc126c390 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -52,8 +52,14 @@ davinci_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) struct irq_chip_type *ct; gc = irq_alloc_generic_chip("AINTC", 1, irq_start, base, handle_edge_irq); + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, irq_start); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 1bd73a04be20..04c49f7543ef 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -17,6 +17,7 @@ #include <asm/cacheflush.h> #include <asm/delay.h> +#include <asm/io.h> #include <mach/da8xx.h> #include <mach/sram.h> diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 21e721ab7378..3cedcf2d39e5 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o gpio.o +obj-y := core.o clock.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index ce07e0a6f891..c60f081e930b 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -extern void ep93xx_gpio_init_irq(void); - void __init ep93xx_init_irq(void) { vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); - - ep93xx_gpio_init_irq(); } @@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void) } /************************************************************************* + * EP93xx GPIO + *************************************************************************/ +static struct resource ep93xx_gpio_resource[] = { + { + .start = EP93XX_GPIO_PHYS_BASE, + .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_gpio_device = { + .name = "gpio-ep93xx", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), + .resource = ep93xx_gpio_resource, +}; + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -251,9 +265,9 @@ static void ep93xx_uart_set_mctrl(struct amba_device *dev, unsigned int mcr; mcr = 0; - if (!(mctrl & TIOCM_RTS)) + if (mctrl & TIOCM_RTS) mcr |= 2; - if (!(mctrl & TIOCM_DTR)) + if (mctrl & TIOCM_DTR) mcr |= 1; __raw_writel(mcr, base + EP93XX_UART_MCR_OFFSET); @@ -874,14 +888,13 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -extern void ep93xx_gpio_init(void); - void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - ep93xx_gpio_init(); + /* Get the GPIO working early, other devices need it */ + platform_device_register(&ep93xx_gpio_device); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c deleted file mode 100644 index 415dce37b88c..000000000000 --- a/arch/arm/mach-ep93xx/gpio.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/arch/arm/mach-ep93xx/gpio.c - * - * Generic EP93xx GPIO handling - * - * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> - * - * Based on code originally from: - * linux/arch/arm/mach-ep93xx/core.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/irq.h> - -#include <mach/hardware.h> - -/************************************************************************* - * Interrupt handling for EP93xx on-chip GPIOs - *************************************************************************/ -static unsigned char gpio_int_unmasked[3]; -static unsigned char gpio_int_enabled[3]; -static unsigned char gpio_int_type1[3]; -static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debounce[3]; - -/* Port ordering is: A B F */ -static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; -static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; -static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; -static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; -static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; - -static void ep93xx_gpio_update_int_params(unsigned port) -{ - BUG_ON(port > 2); - - __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); - - __raw_writeb(gpio_int_type2[port], - EP93XX_GPIO_REG(int_type2_register_offset[port])); - - __raw_writeb(gpio_int_type1[port], - EP93XX_GPIO_REG(int_type1_register_offset[port])); - - __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], - EP93XX_GPIO_REG(int_en_register_offset[port])); -} - -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - -static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) -{ - int line = irq_to_gpio(irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (enable) - gpio_int_debounce[port] |= port_mask; - else - gpio_int_debounce[port] &= ~port_mask; - - __raw_writeb(gpio_int_debounce[port], - EP93XX_GPIO_REG(int_debounce_register_offset[port])); -} - -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned char status; - int i; - - status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; - generic_handle_irq(gpio_irq); - } - } - - status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - generic_handle_irq(gpio_irq); - } - } -} - -static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) - */ - int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; - - generic_handle_irq(gpio_irq); -} - -static void ep93xx_gpio_irq_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(port); - } - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - - gpio_int_unmasked[port] &= ~port_mask; - ep93xx_gpio_update_int_params(port); - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] &= ~(1 << (line & 7)); - ep93xx_gpio_update_int_params(port); -} - -static void ep93xx_gpio_irq_unmask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] |= 1 << (line & 7); - ep93xx_gpio_update_int_params(port); -} - -/* - * gpio_int_type1 controls whether the interrupt is level (0) or - * edge (1) triggered, while gpio_int_type2 controls whether it - * triggers on low/falling (0) or high/rising (1). - */ -static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - const int gpio = irq_to_gpio(d->irq); - const int port = gpio >> 3; - const int port_mask = 1 << (gpio & 7); - irq_flow_handler_t handler; - - gpio_direction_input(gpio); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_int_type1[port] |= port_mask; - /* set initial polarity based on current input level */ - if (gpio_get_value(gpio)) - gpio_int_type2[port] &= ~port_mask; /* falling */ - else - gpio_int_type2[port] |= port_mask; /* rising */ - handler = handle_edge_irq; - break; - default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); - return -EINVAL; - } - - __irq_set_handler_locked(d->irq, handler); - - gpio_int_enabled[port] |= port_mask; - - ep93xx_gpio_update_int_params(port); - - return 0; -} - -static struct irq_chip ep93xx_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = ep93xx_gpio_irq_ack, - .irq_mask_ack = ep93xx_gpio_irq_mask_ack, - .irq_mask = ep93xx_gpio_irq_mask, - .irq_unmask = ep93xx_gpio_irq_unmask, - .irq_set_type = ep93xx_gpio_irq_type, -}; - -void __init ep93xx_gpio_init_irq(void) -{ - int gpio_irq; - - for (gpio_irq = gpio_to_irq(0); - gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, - handle_level_irq); - set_irq_flags(gpio_irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, - ep93xx_gpio_ab_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, - ep93xx_gpio_f_irq_handler); -} - - -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_chip { - struct gpio_chip chip; - - void __iomem *data_reg; - void __iomem *data_dir_reg; -}; - -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) - -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_dir_reg); - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - int line; - u8 v; - - local_irq_save(flags); - - /* Set the value */ - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - - /* Drive as an output */ - line = chip->base + offset; - if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Ports A/B/F */ - ep93xx_gpio_int_mask(line); - ep93xx_gpio_update_int_params(line >> 3); - } - - v = __raw_readb(ep93xx_chip->data_dir_reg); - v |= (1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - - return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); -} - -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - local_irq_restore(flags); -} - -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, - unsigned offset, unsigned debounce) -{ - int gpio = chip->base + offset; - int irq = gpio_to_irq(gpio); - - if (irq < 0) - return -EINVAL; - - ep93xx_gpio_int_debounce(irq, debounce ? true : false); - - return 0; -} - -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = ep93xx_gpio_direction_input, \ - .direction_output = ep93xx_gpio_direction_output, \ - .get = ep93xx_gpio_get, \ - .set = ep93xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .data_reg = EP93XX_GPIO_REG(dr), \ - .data_dir_reg = EP93XX_GPIO_REG(ddr), \ - } - -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), - EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), - EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), -}; - -void __init ep93xx_gpio_init(void) -{ - int i; - - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; - - /* - * Ports A, B, and F support input debouncing when - * used as interrupts. - */ - if (!strcmp(chip->label, "A") || - !strcmp(chip->label, "B") || - !strcmp(chip->label, "F")) - chip->set_debounce = ep93xx_gpio_set_debounce; - - gpiochip_add(chip); - } -} diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d1055097..c4a7b84ef06d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 9babe4473e88..bfd621460abf 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -23,6 +23,7 @@ #include <plat/sdhci.h> #include <plat/devs.h> #include <plat/fimc-core.h> +#include <plat/iic-core.h> #include <mach/regs-irq.h> @@ -132,6 +133,11 @@ void __init exynos4_map_io(void) s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + + /* The I2C bus controllers are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); + s3c_i2c2_setname("s3c2440-i2c"); } void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 1eed5f9f7bd3..983069a53239 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -330,7 +330,7 @@ struct platform_device exynos4_device_ac97 = { static int exynos4_spdif_cfg_gpio(struct platform_device *pdev) { - s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3)); + s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4)); return 0; } diff --git a/arch/arm/mach-exynos4/headsmp.S b/arch/arm/mach-exynos4/headsmp.S index 6c6cfc50c46b..3cdeb3647542 100644 --- a/arch/arm/mach-exynos4/headsmp.S +++ b/arch/arm/mach-exynos4/headsmp.S @@ -13,7 +13,7 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT + __CPUINIT /* * exynos4 specific entry point for secondary CPUs. This provides diff --git a/arch/arm/mach-exynos4/init.c b/arch/arm/mach-exynos4/init.c index cf91f50e43ab..a8a83e3881a4 100644 --- a/arch/arm/mach-exynos4/init.c +++ b/arch/arm/mach-exynos4/init.c @@ -35,6 +35,7 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) tcfg->clocks = exynos4_serial_clocks; tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks); } + tcfg->flags |= NO_NEED_CHECK_CLKSRC; } s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 152676471b67..edd814110da8 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK0(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT .max_width = 8, @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = { }; static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT .max_width = 8, diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 5f1f9867fc70..121ad1d4fa39 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void) clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); + ce->cpumask = cpumask_of(smp_processor_id()); clockevents_register_device(ce); } diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 30b971d65815..1be2eeb7a0a0 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -26,6 +26,7 @@ #include <asm/hardware/debug-8250.S> #else +#include <mach/hardware.h> /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff @@ -36,8 +37,8 @@ .else mov \rp, #0 .endif - orr \rv, \rp, #0x42000000 - orr \rp, \rp, #dc21285_high + orr \rv, \rp, #dc21285_high + orr \rp, \rp, #0x42000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-h720x/Kconfig b/arch/arm/mach-h720x/Kconfig index 9b6982efbd22..abf356c02343 100644 --- a/arch/arm/mach-h720x/Kconfig +++ b/arch/arm/mach-h720x/Kconfig @@ -6,12 +6,14 @@ config ARCH_H7201 bool "gms30c7201" depends on ARCH_H720X select CPU_H7201 + select ZONE_DMA help Say Y here if you are using the Hynix GMS30C7201 Reference Board config ARCH_H7202 bool "hms30c7202" select CPU_H7202 + select ZONE_DMA depends on ARCH_H720X help Say Y here if you are using the Hynix HMS30C7202 Reference Board diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 236f1495efad..f8aa5be0eb15 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -26,6 +26,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/clk.h> #include <linux/scatterlist.h> diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c84e371..59d2a3b137d9 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -115,6 +115,8 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff619b1..ede2710f8b76 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f078a19c..f49470553bdf 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41d43d2..87887ac5806b 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef825fa6f..f39a478ba1a6 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2819b9..da36da52969d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1ec517..c6269d60ddbc 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -231,6 +231,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6fbf8c..272f793e9247 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 841140516ede..d81a769fe895 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20cf4e3..e472a1d88058 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cbbda9b..5cd8bee46960 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 74ac88978ddd..d389ecf9b5a8 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fdf0911..01534bb61305 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -219,6 +219,8 @@ static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf93f81..117ce0a50f4e 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -267,6 +267,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db79506f5e4..fc26ed71b9ed 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b982449cb52..441fbb83f39c 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -689,6 +690,8 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee0254634..0ce49478a479 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676ae087..750368ddf0f9 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4cad320e..4b47fd9fdd89 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e49ca95..a52fd36e2b52 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -507,6 +507,8 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880ac1bbc..48b3c6fd5cf0 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541511e7..c85876fed663 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a11c43..71083aa16038 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b81295..f45b7cd72c8a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb871c7ed..2d6a64bbac44 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 026441628dfa..163cc318cafb 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -356,6 +356,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c16328715939..3626f486498a 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee043628e..82805260e19c 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -129,6 +129,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e3473d236..7d8e012a6335 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba5a0e7..2bded591d5c2 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -44,15 +43,19 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500ac2c8..6d7d518686a5 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,17 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c7fa8e..9a1591c2508d 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -27,7 +27,6 @@ #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -57,16 +56,16 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +void __init imx25_soc_init(void) +{ + /* i.mx25 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a39f08c..133b30003ddb 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -24,7 +24,6 @@ #include <mach/common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +69,18 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 86b9b45864d2..6d103c01b8b9 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -26,7 +26,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx31_io_desc[] __initdata = { @@ -53,14 +52,14 @@ void __init imx31_init_early(void) mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} + +void __init imx31_soc_init(void) +{ + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index c880e6d1ae55..bb068bc8dab7 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -27,7 +27,6 @@ #include <mach/common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx35_io_desc[] __initdata = { @@ -50,14 +49,15 @@ void __init imx35_init_early(void) mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} + +void __init imx35_soc_init(void) +{ + /* i.mx35 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); } diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 5c147fb66a01..a5b989728b9e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -17,6 +17,7 @@ * */ +#include <linux/dma-mapping.h> #include <linux/serial_8250.h> #include <linux/io.h> #ifdef CONFIG_MTD_PHYSMAP diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 74ed81a3cb1a..07772575d7ab 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -419,14 +419,20 @@ static void notrace ixp4xx_update_sched_clock(void) /* * clocksource */ + +static cycle_t ixp4xx_clocksource_read(struct clocksource *c) +{ + return *IXP4XX_OSTS; +} + unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - clocksource_mmio_init(&IXP4XX_OSTS, "OSTS", ixp4xx_timer_freq, 200, 32, - clocksource_mmio_readl_up); + clocksource_mmio_init(NULL, "OSTS", ixp4xx_timer_freq, 200, 32, + ixp4xx_clocksource_read); } /* diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 7bb78fd5a2a6..c79162a50f28 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -177,9 +177,16 @@ static struct i2c_board_info brownstone_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; +static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = { + .clk_delay_cycles = 0x1f, + .flags = PXA_FLAG_CARD_PERMANENT + | PXA_FLAG_SD_8_BIT_CAPABLE_SLOT, +}; + + static void __init brownstone_init(void) { mfp_config(ARRAY_AND_SIZE(brownstone_pin_config)); @@ -189,6 +196,7 @@ static void __init brownstone_init(void) mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ + mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ /* enable 5v regulator */ platform_device_register(&brownstone_v_5vp_device); diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 2cbf6df09b82..de7b88826ad7 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MMP2_H #define __ASM_MACH_MMP2_H -#include <plat/sdhci.h> +#include <linux/platform_data/pxa_sdhci.h> struct sys_timer; diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 24172a0aad59..5d6421d63254 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -154,7 +154,7 @@ static struct i2c_board_info jasper_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; static void __init jasper_init(void) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 8e6c3ac7f7c1..079c18861d5c 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -168,10 +168,10 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), }; static int __init mmp2_init(void) @@ -222,8 +222,8 @@ MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70); MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70); MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70); MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29); -MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120); -MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120); -MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120); -MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120); +MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120); +MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120); +MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120); +MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index 72b4e7631583..ab9f999106c7 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -79,7 +79,7 @@ static APBC_CLK(ssp4, PXA168_SSP4, 4, 0); static APBC_CLK(ssp5, PXA168_SSP5, 4, 0); static APBC_CLK(keypad, PXA168_KPC, 0, 32000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); /* device and clock bindings */ diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 8f92ccd26edf..1464607aa60d 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -110,7 +110,7 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000); static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000); static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000); -static APMU_CLK(nand, NAND, 0x01db, 208000000); +static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(u2o, USB, 0x1b, 480000000); /* device and clock bindings */ diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 38b95e949d13..63621f152c98 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -23,6 +23,8 @@ #include <linux/io.h> #include <asm/mach/time.h> +#include <asm/hardware/gic.h> + #include <mach/msm_iomap.h> #include <mach/cpu.h> @@ -55,10 +57,12 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ - defined(CONFIG_ARCH_MSM8960) +#elif defined(CONFIG_ARCH_MSM7X30) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) +#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) #else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ #define MSM_DGT_SHIFT (5) @@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs) { struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - return readl(clk->global_counter); + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return readl(clk->global_counter) >> clk->shift; } static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 4efa02ee1639..add0d42de7af 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -245,6 +245,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode); */ static void __init eukrea_cpuimx51_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 5ef25a596143..ff096d587299 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init eukrea_cpuimx51sd_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 11210e1ae42a..7de25c6712eb 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = { */ static void __init mx50_rdp_board_init(void) { + imx50_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, ARRAY_SIZE(mx50_rdp_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 63dfbeafbc1e..3112d15feebc 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -135,6 +135,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { */ static void __init mx51_3ds_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index c7b3fabf50f9..6021dd00ec75 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -340,6 +340,8 @@ static void __init mx51_babbage_init(void) iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + imx51_soc_init(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e362315291b..3be603b9075a 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -236,6 +236,8 @@ late_initcall(mx51_efikamx_power_init); static void __init mx51_efikamx_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 474fc6e4c6df..4b2e522de0f8 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -248,6 +248,8 @@ static void __init mx51_efikasb_board_id(void) static void __init efikasb_board_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, ARRAY_SIZE(mx51efikasb_pads)); efika_board_common_init(); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571882c6..0d9218a6e2d2 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -117,6 +117,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = { static void __init mx53_evk_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 1b947e8c9c0c..359c3e248add 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -227,6 +227,8 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { static void __init mx53_loco_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); imx53_add_imx_uart(0, NULL); diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 817c08938f55..bc02894eafef 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { static void __init mx53_smd_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, ARRAY_SIZE(mx53_smd_pads)); mx53_smd_init_uart(); diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 153ada53e575..371ca8c8414c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -12,7 +12,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/irqs.h> @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; - -static struct mxc_gpio_port mxc_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO1_LOW, - .irq_high = MX51_MXC_INT_GPIO1_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - { - .chip.label = "gpio-1", - .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO2_LOW, - .irq_high = MX51_MXC_INT_GPIO2_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 - }, - { - .chip.label = "gpio-2", - .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO3_LOW, - .irq_high = MX51_MXC_INT_GPIO3_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 - }, - { - .chip.label = "gpio-3", - .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO4_LOW, - .irq_high = MX51_MXC_INT_GPIO4_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 - }, - { - .chip.label = "gpio-4", - .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), - .irq = MX53_INT_GPIO5_LOW, - .irq_high = MX53_INT_GPIO5_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 - }, - { - .chip.label = "gpio-5", - .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), - .irq = MX53_INT_GPIO6_LOW, - .irq_high = MX53_INT_GPIO6_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 - }, - { - .chip.label = "gpio-6", - .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), - .irq = MX53_INT_GPIO7_LOW, - .irq_high = MX53_INT_GPIO7_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 - }, -}; - -int __init imx51_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, 4); -} - -int __init imx53_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index b9c363b514a9..77e374c726fa 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -56,17 +55,18 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); +} + +void __init imx50_soc_init(void) +{ + /* i.mx50 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ff557301b42b..665843d6c2b2 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -69,8 +69,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -int imx51_register_gpios(void); - void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -86,11 +84,8 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx51_register_gpios(); } -int imx53_register_gpios(void); - void __init mx53_init_irq(void) { unsigned long tzic_addr; @@ -103,5 +98,25 @@ void __init mx53_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx53_register_gpios(); +} + +void __init imx51_soc_init(void) +{ + /* i.mx51 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); +} + +void __init imx53_soc_init(void) +{ + /* i.mx53 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); } diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 58e892376bf2..6c38262a3aaa 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index cfdb6b284702..fe3e847930c9 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev) return amba_device_register(adev, &iomem_resource); } + +struct device mxs_apbh_bus = { + .init_name = "mxs_apbh", + .parent = &platform_bus, +}; + +static int __init mxs_device_init(void) +{ + return device_register(&mxs_apbh_bus); +} +core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 324f2824d38d..351915c683ff 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c index 796606cce0ce..27608f5d2ac8 100644 --- a/arch/arm/mach-mxs/devices/platform-auart.c +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx23.h> #include <mach/mx28.h> diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c index 295c4424d5d9..6a0202b1016c 100644 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -6,6 +6,7 @@ * Free Software Foundation. */ #include <linux/compiler.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/init.h> diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index 9859cf283335..ae96a4fd8f14 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx28.h> #include <mach/devices-common.h> diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c new file mode 100644 index 000000000000..ed0885e414e0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -0,0 +1,53 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_gpio( + int id, resource_size_t iobase, int irq) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxs_apbh_bus, + "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); +} + +static int __init mxs_add_mxs_gpio(void) +{ + if (cpu_is_mx23()) { + mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); + } + + if (cpu_is_mx28()) { + mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); + } + + return 0; +} +postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c deleted file mode 100644 index 2c950fef71a8..000000000000 --- a/arch/arm/mach-mxs/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <asm-generic/bug.h> - -#include "gpio.h" - -static struct mxs_gpio_port *mxs_gpio_ports; -static int gpio_table_size; - -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) - -#define GPIO_INT_FALL_EDGE 0x0 -#define GPIO_INT_LOW_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_HIGH_LEV 0x3 -#define GPIO_INT_LEV_MASK (1 << 0) -#define GPIO_INT_POL_MASK (1 << 1) - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) -{ - __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); -} - -static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, - int enable) -{ - if (enable) { - __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); - } else { - __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - } -} - -static void mxs_gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void mxs_gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void mxs_gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 pin_mask = 1 << (gpio & 31); - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - void __iomem *pin_addr; - int edge; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); - if (edge & GPIO_INT_LEV_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); - if (edge & GPIO_INT_POL_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* MXS has one interrupt *per* gpio port */ -static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); - u32 gpio_irq_no_base = port->virtual_irq_start; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & - __raw_readl(port->base + PINCTRL_IRQEN(port->id)); - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_stat &= ~(1 << irqoffset); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1f; - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "mxs gpio", - .irq_ack = mxs_gpio_ack_irq, - .irq_mask = mxs_gpio_mask_irq, - .irq_unmask = mxs_gpio_unmask_irq, - .irq_set_type = mxs_gpio_set_irq_type, - .irq_set_wake = mxs_gpio_set_wake_irq, -}; - -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); - - if (dir) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; -} - -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); - - if (value) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - mxs_set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxs_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxs_gpio_set(chip, offset, value); - mxs_set_gpio_direction(chip, offset, 1); - return 0; -} - -int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxs_gpio_ports = port; - gpio_table_size = cnt; - - pr_info("MXS GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); - __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); - - /* clear address has to be used to clear IRQSTAT bits */ - __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); - - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - - /* register gpio chip */ - port[i].chip.direction_input = mxs_gpio_direction_input; - port[i].chip.direction_output = mxs_gpio_direction_output; - port[i].chip.get = mxs_gpio_get; - port[i].chip.set = mxs_gpio_set; - port[i].chip.to_irq = mxs_gpio_to_irq; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON(gpiochip_add(&port[i].chip) < 0); - } - - return 0; -} - -#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) -#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) - -#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ - { \ - .chip.label = "gpio-" #_id, \ - .id = _id, \ - .irq = _irq, \ - .base = _base, \ - .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ - } - -#ifdef CONFIG_SOC_IMX23 -static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), -}; - -int __init mx23_register_gpios(void) -{ - return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); -} -#endif - -#ifdef CONFIG_SOC_IMX28 -static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), -}; - -int __init mx28_register_gpios(void) -{ - return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); -} -#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h deleted file mode 100644 index 005bb06630b1..000000000000 --- a/arch/arm/mach-mxs/gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MXS_GPIO_H__ -#define __MXS_GPIO_H__ - -struct mxs_gpio_port { - void __iomem *base; - int id; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxs_gpio_init(struct mxs_gpio_port*, int); - -#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 7a37469ed5bf..812d7a813a78 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/amba/bus.h> +extern struct device mxs_apbh_bus; + struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eacdc6b0e70a..56767a5cce0e 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -26,7 +26,6 @@ #include <mach/iomux-mx28.h> #include "devices-mx28.h" -#include "gpio.h" #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c index 5148cd64a6b7..1b2345ac1a87 100644 --- a/arch/arm/mach-mxs/mm-mx23.c +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -41,5 +41,4 @@ void __init mx23_map_io(void) void __init mx23_init_irq(void) { icoll_init_irq(); - mx23_register_gpios(); } diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c index 7e4cea32ebc6..b6e18ddb92c0 100644 --- a/arch/arm/mach-mxs/mm-mx28.c +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -41,5 +41,4 @@ void __init mx28_map_io(void) void __init mx28_init_irq(void) { icoll_init_irq(); - mx28_register_gpios(); } diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 65157a35dbba..54add60f94c9 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -16,6 +16,8 @@ #include <linux/err.h> #include <linux/mutex.h> +#include <asm/processor.h> /* for cpu_relax() */ + #include <mach/mxs.h> #define OCOTP_WORD_OFFSET 0x20 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index af98117043d2..5b114d1558c8 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,14 +4,14 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o +obj-$(CONFIG_PM) += pm.o sleep.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b68..f49ce85d2448 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -215,7 +215,7 @@ static struct omap_kp_platform_data ams_delta_kp_data __initdata = { .delay = 9, }; -static struct platform_device ams_delta_kp_device __initdata = { +static struct platform_device ams_delta_kp_device = { .name = "omap-keypad", .id = -1, .dev = { @@ -225,12 +225,12 @@ static struct platform_device ams_delta_kp_device __initdata = { .resource = ams_delta_kp_resources, }; -static struct platform_device ams_delta_lcd_device __initdata = { +static struct platform_device ams_delta_lcd_device = { .name = "lcd_ams_delta", .id = -1, }; -static struct platform_device ams_delta_led_device __initdata = { +static struct platform_device ams_delta_led_device = { .name = "ams-delta-led", .id = -1 }; @@ -267,7 +267,7 @@ static struct soc_camera_link ams_delta_iclink = { .power = ams_delta_camera_power, }; -static struct platform_device ams_delta_camera_device __initdata = { +static struct platform_device ams_delta_camera_device = { .name = "soc-camera-pdrv", .id = 0, .dev = { diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 04c4b04cf54e..399da4ce017b 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -34,14 +34,25 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap15xx_mpuio_regs, }; -static struct __initdata platform_device omap15xx_mpu_gpio = { +static struct platform_device omap15xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -64,13 +75,24 @@ static struct __initdata resource omap15xx_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP1510_GPIO_DIR_CONTROL, + .datain = OMAP1510_GPIO_DATA_INPUT, + .dataout = OMAP1510_GPIO_DATA_OUTPUT, + .irqstatus = OMAP1510_GPIO_INT_STATUS, + .irqenable = OMAP1510_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1510, .bank_width = 16, + .regs = &omap15xx_gpio_regs, }; -static struct __initdata platform_device omap15xx_gpio = { +static struct platform_device omap15xx_gpio = { .name = "omap_gpio", .id = 1, .dev = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 5dd0d4c82b24..0f399bd0e70e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -37,14 +37,25 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap16xx_mpuio_regs, }; -static struct __initdata platform_device omap16xx_mpu_gpio = { +static struct platform_device omap16xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -67,13 +78,27 @@ static struct __initdata resource omap16xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_gpio_regs = { + .revision = OMAP1610_GPIO_REVISION, + .direction = OMAP1610_GPIO_DIRECTION, + .set_dataout = OMAP1610_GPIO_SET_DATAOUT, + .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT, + .datain = OMAP1610_GPIO_DATAIN, + .dataout = OMAP1610_GPIO_DATAOUT, + .irqstatus = OMAP1610_GPIO_IRQSTATUS1, + .irqenable = OMAP1610_GPIO_IRQENABLE1, + .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, + .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, +}; + static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; -static struct __initdata platform_device omap16xx_gpio1 = { +static struct platform_device omap16xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -100,9 +125,10 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; -static struct __initdata platform_device omap16xx_gpio2 = { +static struct platform_device omap16xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -129,9 +155,10 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; -static struct __initdata platform_device omap16xx_gpio3 = { +static struct platform_device omap16xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -158,9 +185,10 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; -static struct __initdata platform_device omap16xx_gpio4 = { +static struct platform_device omap16xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 1204c8b871af..5ab63eab0ff5 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -39,14 +39,25 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL / 2, + .datain = OMAP_MPUIO_INPUT_LATCH / 2, + .dataout = OMAP_MPUIO_OUTPUT / 2, + .irqstatus = OMAP_MPUIO_GPIO_INT / 2, + .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, .bank_stride = 2, + .regs = &omap7xx_mpuio_regs, }; -static struct __initdata platform_device omap7xx_mpu_gpio = { +static struct platform_device omap7xx_mpu_gpio = { .name = "omap_gpio", .id = 0, .dev = { @@ -69,13 +80,24 @@ static struct __initdata resource omap7xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP7XX_GPIO_DIR_CONTROL, + .datain = OMAP7XX_GPIO_DATA_INPUT, + .dataout = OMAP7XX_GPIO_DATA_OUTPUT, + .irqstatus = OMAP7XX_GPIO_INT_STATUS, + .irqenable = OMAP7XX_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio1 = { +static struct platform_device omap7xx_gpio1 = { .name = "omap_gpio", .id = 1, .dev = { @@ -102,9 +124,10 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio2 = { +static struct platform_device omap7xx_gpio2 = { .name = "omap_gpio", .id = 2, .dev = { @@ -131,9 +154,10 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio3 = { +static struct platform_device omap7xx_gpio3 = { .name = "omap_gpio", .id = 3, .dev = { @@ -160,9 +184,10 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio4 = { +static struct platform_device omap7xx_gpio4 = { .name = "omap_gpio", .id = 4, .dev = { @@ -189,9 +214,10 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio5 = { +static struct platform_device omap7xx_gpio5 = { .name = "omap_gpio", .id = 5, .dev = { @@ -218,9 +244,10 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; -static struct __initdata platform_device omap7xx_gpio6 = { +static struct platform_device omap7xx_gpio6 = { .name = "omap_gpio", .id = 6, .dev = { diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index fe31d933f0ed..334fb8871bc3 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS }, }; +#define OMAP1_PWR_DOMAIN (&default_power_domain) +#else +#define OMAP1_PWR_DOMAIN NULL +#endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = &default_power_domain, + .pwr_domain = OMAP1_PWR_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void) return 0; } core_initcall(omap1_pm_runtime_init); -#endif /* CONFIG_PM_RUNTIME */ + diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2a0bb4818cae..23f71d40883e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -84,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = { static struct omap_nand_platform_data pandora_nand_data = { .cs = 0, - .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .devsize = NAND_BUSWIDTH_16, + .xfer_type = NAND_OMAP_PREFETCH_DMA, .parts = omap3pandora_nand_partitions, .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), }; diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 990366726c58..88bd6f7705f0 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -558,7 +558,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev __initdata_or_module = { +static struct platform_device rx51_si4713_dev = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9529842ae054..9a46d7773a48 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); + pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); + if (!pdata) { + pr_err("gpio%d: Memory allocation failed\n", id); + return -ENOMEM; + } + switch (oh->class->rev) { case 0: case 1: pdata->bank_type = METHOD_GPIO_24XX; + pdata->regs->revision = OMAP24XX_GPIO_REVISION; + pdata->regs->direction = OMAP24XX_GPIO_OE; + pdata->regs->datain = OMAP24XX_GPIO_DATAIN; + pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; + pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; + pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; + pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; + pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; + pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; break; case 2: pdata->bank_type = METHOD_GPIO_44XX; + pdata->regs->revision = OMAP4_GPIO_REVISION; + pdata->regs->direction = OMAP4_GPIO_OE; + pdata->regs->datain = OMAP4_GPIO_DATAIN; + pdata->regs->dataout = OMAP4_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; + pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; + pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; + pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; + pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; break; default: WARN(1, "Invalid gpio bank_type\n"); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index a5a83b358ddd..e01da45c0537 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir; static int pm_dbg_init_done; -static int __init pm_dbg_init(void); +static int pm_dbg_init(void); enum { DEBUG_FILE_COUNTERS = 0, @@ -595,7 +595,7 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int __init pm_dbg_init(void) +static int pm_dbg_init(void) { int i; struct dentry *d; diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 87ae3129f4f7..b27544bcafcb 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -347,9 +347,9 @@ static int pxa2xx_mfp_suspend(void) if ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && (GPDR(i) & GPIO_bit(i))) { if (GPLR(i) & GPIO_bit(i)) - PGSR(i) |= GPIO_bit(i); + PGSR(gpio_to_bank(i)) |= GPIO_bit(i); else - PGSR(i) &= ~GPIO_bit(i); + PGSR(gpio_to_bank(i)) &= ~GPIO_bit(i); } } diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index d130f77b6d11..2f37d43f51b6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -573,10 +573,10 @@ static struct pxafb_mode_info sharp_lq043t3dx02_mode = { .xres = 480, .yres = 272, .bpp = 16, - .hsync_len = 4, + .hsync_len = 41, .left_margin = 2, .right_margin = 1, - .vsync_len = 1, + .vsync_len = 10, .upper_margin = 3, .lower_margin = 1, .sync = 0, @@ -596,29 +596,31 @@ static void __init raumfeld_lcd_init(void) { int ret; - pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); - - /* Earlier devices had the backlight regulator controlled - * via PWM, later versions use another controller for that */ - if ((system_rev & 0xff) < 2) { - mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; - pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); - platform_device_register(&raumfeld_pwm_backlight_device); - } else - platform_device_register(&raumfeld_lt3593_device); - ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable"); if (ret < 0) pr_warning("Unable to request GPIO_TFT_VA_EN\n"); else gpio_direction_output(GPIO_TFT_VA_EN, 1); + msleep(100); + ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable"); if (ret < 0) pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n"); else gpio_direction_output(GPIO_DISPLAY_ENABLE, 1); + /* Hardware revision 2 has the backlight regulator controlled + * by an LT3593, earlier and later devices use PWM for that. */ + if ((system_rev & 0xff) == 2) { + platform_device_register(&raumfeld_lt3593_device); + } else { + mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT; + pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1); + platform_device_register(&raumfeld_pwm_backlight_device); + } + + pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info); platform_device_register(&pxa3xx_device_gcu); } @@ -657,10 +659,10 @@ static struct lis3lv02d_platform_data lis3_pdata = { #define SPI_AK4104 \ { \ - .modalias = "ak4104", \ - .max_speed_hz = 10000, \ - .bus_num = 0, \ - .chip_select = 0, \ + .modalias = "ak4104-codec", \ + .max_speed_hz = 10000, \ + .bus_num = 0, \ + .chip_select = 0, \ .controller_data = (void *) GPIO_SPDIF_CS, \ } diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 7fe74067d85f..094279aefe9c 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/apm-emulation.h> diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index dd3120df09fe..fc2dc0b3d4fe 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -552,7 +552,7 @@ struct mini2440_features_t { struct platform_device *optional[8]; }; -static void mini2440_parse_features( +static void __init mini2440_parse_features( struct mini2440_features_t * features, const char * features_str ) { diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 82db072cb836..5e6b42089eb4 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -88,6 +88,7 @@ static struct s3c64xx_spi_info s3c64xx_spi0_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -132,6 +133,7 @@ static struct s3c64xx_spi_info s3c64xx_spi1_pdata = { .cfg_gpio = s3c64xx_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, + .tx_st_done = 21, }; struct platform_device s3c64xx_device_spi1 = { diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b197171e7d03..204bfafe4bfc 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -113,7 +113,7 @@ found: return chan; } -int s3c2410_dma_config(unsigned int channel, int xferunit) +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -297,7 +297,7 @@ static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan) return 0; } -int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -331,7 +331,7 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -415,7 +415,7 @@ err_buff: EXPORT_SYMBOL(s3c2410_dma_enqueue); -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -463,7 +463,7 @@ int s3c2410_dma_devconfig(unsigned int channel, EXPORT_SYMBOL(s3c2410_dma_devconfig); -int s3c2410_dma_getposition(unsigned int channel, +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -487,7 +487,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -533,7 +533,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c index e78ee18c76e3..ac825e826326 100644 --- a/arch/arm/mach-s5p64x0/dev-spi.c +++ b/arch/arm/mach-s5p64x0/dev-spi.c @@ -112,12 +112,14 @@ static struct s3c64xx_spi_info s5p6440_spi0_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi0_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -160,12 +162,14 @@ static struct s3c64xx_spi_info s5p6440_spi1_pdata = { .cfg_gpio = s5p6440_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; static struct s3c64xx_spi_info s5p6450_spi1_pdata = { .cfg_gpio = s5p6450_spi_cfg_gpio, .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, + .tx_st_done = 25, }; struct platform_device s5p64x0_device_spi1 = { diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c index 57b19794d9bb..e5d6c4dceb56 100644 --- a/arch/arm/mach-s5pc100/dev-spi.c +++ b/arch/arm/mach-s5pc100/dev-spi.c @@ -15,6 +15,7 @@ #include <mach/dma.h> #include <mach/map.h> #include <mach/spi-clocks.h> +#include <mach/irqs.h> #include <plat/s3c64xx-spi.h> #include <plat/gpio-cfg.h> @@ -90,6 +91,7 @@ static struct s3c64xx_spi_info s5pc100_spi0_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -134,6 +136,7 @@ static struct s3c64xx_spi_info s5pc100_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi1 = { @@ -176,6 +179,7 @@ static struct s3c64xx_spi_info s5pc100_spi2_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 13, .high_speed = 1, + .tx_st_done = 21, }; struct platform_device s5pc100_device_spi2 = { diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c index e3249a47e3b1..eaf9a7bff7a0 100644 --- a/arch/arm/mach-s5pv210/dev-spi.c +++ b/arch/arm/mach-s5pv210/dev-spi.c @@ -85,6 +85,7 @@ static struct s3c64xx_spi_info s5pv210_spi0_pdata = { .fifo_lvl_mask = 0x1ff, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; static u64 spi_dmamask = DMA_BIT_MASK(32); @@ -129,6 +130,7 @@ static struct s3c64xx_spi_info s5pv210_spi1_pdata = { .fifo_lvl_mask = 0x7f, .rx_lvl_offset = 15, .high_speed = 1, + .tx_st_done = 25, }; struct platform_device s5pv210_device_spi1 = { diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index c95258c274c1..ce5c2513c6ce 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -381,11 +381,9 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) gpio_set_value(GPIO_PORT114, state); } -static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { - .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, - .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, +static struct sh_mobile_sdhi_info sh_sdhi1_info = { .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, - .tmio_caps = MMC_CAP_NONREMOVABLE, + .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, }; @@ -415,7 +413,7 @@ static struct platform_device sdhi1_device = { .name = "sh_mobile_sdhi", .id = 1, .dev = { - .platform_data = &sh_sdhi1_platdata, + .platform_data = &sh_sdhi1_info, }, .num_resources = ARRAY_SIZE(sdhi1_resources), .resource = sdhi1_resources, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index f6b687f61c28..803bc6edfca4 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = { I2C_BOARD_INFO("imx074", 0x1a), }; -struct soc_camera_link imx074_link = { +static struct soc_camera_link imx074_link = { .bus_id = 0, .board_info = &imx074_info, .i2c_adapter_id = 0, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 776f20560e72..3802f2afabef 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -126,7 +126,7 @@ * ------+--------------------+--------------------+------- * IRQ0 | ICR1A.IRQ0SA=0010 | SDHI2 card detect | Low * IRQ6 | ICR1A.IRQ6SA=0011 | Ether(LAN9220) | High - * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Tuch Panel | Low + * IRQ7 | ICR1A.IRQ7SA=0010 | LCD Touch Panel | Low * IRQ8 | ICR2A.IRQ8SA=0010 | MMC/SD card detect | Low * IRQ9 | ICR2A.IRQ9SA=0010 | KEY(TCA6408) | Low * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345) | High @@ -165,10 +165,10 @@ * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. * But don't select both drivers in same time. * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE. + * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. * * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports SHARD IRQ, + * This mean its register will be broken if it supports shared IRQ, */ /* @@ -562,7 +562,121 @@ out: clk_put(hdmi_ick); } -/* USB1 (Host) */ +/* USBHS0 is connected to CN22 which takes a USB Mini-B plug + * + * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug, + * but on this particular board IRQ7 is already used by + * the touch screen. This leaves us with software polling. + */ +#define USBHS0_POLL_INTERVAL (HZ * 5) + +struct usbhs_private { + unsigned int usbphyaddr; + unsigned int usbcrcaddr; + struct renesas_usbhs_platform_info info; + struct delayed_work work; + struct platform_device *pdev; +}; + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhs_private, info) + +#define usbhs_is_connected(priv) \ + (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) + +static int usbhs_get_vbus(struct platform_device *pdev) +{ + return usbhs_is_connected(usbhs_get_priv(pdev)); +} + +static void usbhs_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->usbcrcaddr); +} + +static int usbhs0_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static void usbhs0_work_function(struct work_struct *work) +{ + struct usbhs_private *priv = container_of(work, struct usbhs_private, + work.work); + + renesas_usbhs_call_notify_hotplug(priv->pdev); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); +} + +static int usbhs0_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->work, usbhs0_work_function); + schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL); + return 0; +} + +static void usbhs0_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + cancel_delayed_work_sync(&priv->work); +} + +static struct usbhs_private usbhs0_private = { + .usbcrcaddr = 0xe605810c, /* USBCR2 */ + .info = { + .platform_callback = { + .hardware_init = usbhs0_hardware_init, + .hardware_exit = usbhs0_hardware_exit, + .phy_reset = usbhs_phy_reset, + .get_id = usbhs0_get_id, + .get_vbus = usbhs_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + }, + }, +}; + +static struct resource usbhs0_resources[] = { + [0] = { + .name = "USBHS0", + .start = 0xe6890000, + .end = 0xe68900e6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ca0) /* USB0_USB0I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs0_device = { + .name = "renesas_usbhs", + .id = 0, + .dev = { + .platform_data = &usbhs0_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs0_resources), + .resource = usbhs0_resources, +}; + +/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug + * + * Use J30 to select between Host and Function. This setting + * can however not be detected by software. Hotplug of USBHS1 + * is provided via IRQ8. + */ +#define IRQ8 evt2irq(0x0300) + +/* USBHS1 USB Host support via r8a66597_hcd */ static void usb1_host_port_power(int port, int power) { if (!power) /* only power-on is supported for now */ @@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = { static struct resource usb1_host_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -/* USB1 (Function) */ +/* USBHS1 USB Function support via renesas_usbhs */ + #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) #define USB_PHY_OFF (1 << 0) #define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) -struct usbhs_private { - unsigned int irq; - unsigned int usbphyaddr; - unsigned int usbcrcaddr; - struct renesas_usbhs_platform_info info; -}; - -#define usbhs_get_priv(pdev) \ - container_of(renesas_usbhs_get_info(pdev), \ - struct usbhs_private, info) - -#define usbhs_is_connected(priv) \ - (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) - -static int usbhs1_get_id(struct platform_device *pdev) -{ - return USBHS_GADGET; -} - -static int usbhs1_get_vbus(struct platform_device *pdev) -{ - return usbhs_is_connected(usbhs_get_priv(pdev)); -} - static irqreturn_t usbhs1_interrupt(int irq, void *data) { struct platform_device *pdev = data; @@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev) struct usbhs_private *priv = usbhs_get_priv(pdev); int ret; - irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH); - /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - ret = request_irq(priv->irq, usbhs1_interrupt, 0, + ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH, dev_name(&pdev->dev), pdev); if (ret) { dev_err(&pdev->dev, "request_irq err\n"); @@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) /* clear interrupt status */ __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); - free_irq(priv->irq, pdev); + free_irq(IRQ8, pdev); } -static void usbhs1_phy_reset(struct platform_device *pdev) +static int usbhs1_get_id(struct platform_device *pdev) { - struct usbhs_private *priv = usbhs_get_priv(pdev); - - /* init phy */ - __raw_writew(0x8a0a, priv->usbcrcaddr); + return USBHS_GADGET; } static u32 usbhs1_pipe_cfg[] = { @@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = { }; static struct usbhs_private usbhs1_private = { - .irq = evt2irq(0x0300), /* IRQ8 */ - .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */ - .usbcrcaddr = 0xE6058130, /* USBCR4 */ + .usbphyaddr = 0xe60581e2, /* USBPHY1INTAP */ + .usbcrcaddr = 0xe6058130, /* USBCR4 */ .info = { .platform_callback = { .hardware_init = usbhs1_hardware_init, .hardware_exit = usbhs1_hardware_exit, - .phy_reset = usbhs1_phy_reset, .get_id = usbhs1_get_id, - .get_vbus = usbhs1_get_vbus, + .phy_reset = usbhs_phy_reset, + .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = { static struct resource usbhs1_resources[] = { [0] = { - .name = "USBHS", - .start = 0xE68B0000, - .end = 0xE68B00E6 - 1, + .name = "USBHS1", + .start = 0xe68b0000, + .end = 0xe68b00e6 - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = { .resource = usbhs1_resources, }; - /* LED */ static struct gpio_led mackerel_leds[] = { { @@ -1205,6 +1289,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &lcdc_device, &usb1_host_device, &usbhs1_device, + &usbhs0_device, &leds_device, &fsi_device, &fsi_ak4643_device, @@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define GPIO_PORT167CR 0xE60520A7 #define GPIO_PORT168CR 0xE60520A8 #define SRCR4 0xe61580bc #define USCCR1 0xE6058144 @@ -1354,17 +1440,17 @@ static void __init mackerel_init(void) gpio_request(GPIO_PORT151, NULL); /* LCDDON */ gpio_direction_output(GPIO_PORT151, 1); - /* USB enable */ - gpio_request(GPIO_FN_VBUS0_1, NULL); - gpio_request(GPIO_FN_IDIN_1_18, NULL); - gpio_request(GPIO_FN_PWEN_1_115, NULL); - gpio_request(GPIO_FN_OVCN_1_114, NULL); - gpio_request(GPIO_FN_EXTLP_1, NULL); - gpio_request(GPIO_FN_OVCN2_1, NULL); - gpio_pull_down(GPIO_PORT168CR); - - /* setup USB phy */ - __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */ + /* USBHS0 */ + gpio_request(GPIO_FN_VBUS0_0, NULL); + gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */ + + /* USBHS1 */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ + gpio_request(GPIO_FN_IDIN_1_113, NULL); + + /* USB phy tweak to make the r8a66597_hcd host driver work */ + __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 5d0e1503ece6..a911a60e7719 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id) return IRQ_HANDLED; } +static int sh73a0_set_wake(struct irq_data *data, unsigned int on) +{ + return 0; /* always allow wakeup */ +} + void __init sh73a0_init_irq(void) { void __iomem *gic_dist_base = __io(0xf0001000); @@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void) void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE); gic_init(0, 29, gic_dist_base, gic_cpu_base); + gic_arch_extn.irq_set_wake = sh73a0_set_wake; register_intc_controller(&intcs_desc); diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index 2c10190dbb55..e546017f15de 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00) }, }; @@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20) }, }; @@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40) }, }; @@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60) }, }; @@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20) }, }; @@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40) }, }; @@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFB, .irqs = { evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60) }, }; diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 823c703e573c..ed58ef9019b5 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -4,7 +4,6 @@ obj-y += io.o obj-y += irq.o obj-y += clock.o obj-y += timer.o -obj-y += gpio.o obj-y += pinmux.o obj-y += powergate.o obj-y += fuse.o diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c deleted file mode 100644 index 919d63837736..000000000000 --- a/arch/arm/mach-tegra/gpio.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * arch/arm/mach-tegra/gpio.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <linux/io.h> -#include <linux/gpio.h> - -#include <asm/mach/irq.h> - -#include <mach/iomap.h> -#include <mach/suspend.h> - -#define GPIO_BANK(x) ((x) >> 5) -#define GPIO_PORT(x) (((x) >> 3) & 0x3) -#define GPIO_BIT(x) ((x) & 0x7) - -#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \ - GPIO_BANK(x) * 0x80 + \ - GPIO_PORT(x) * 4) - -#define GPIO_CNF(x) (GPIO_REG(x) + 0x00) -#define GPIO_OE(x) (GPIO_REG(x) + 0x10) -#define GPIO_OUT(x) (GPIO_REG(x) + 0X20) -#define GPIO_IN(x) (GPIO_REG(x) + 0x30) -#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40) -#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50) -#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) -#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) - -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) - -#define GPIO_INT_LVL_MASK 0x010101 -#define GPIO_INT_LVL_EDGE_RISING 0x000101 -#define GPIO_INT_LVL_EDGE_FALLING 0x000100 -#define GPIO_INT_LVL_EDGE_BOTH 0x010100 -#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 -#define GPIO_INT_LVL_LEVEL_LOW 0x000000 - -struct tegra_gpio_bank { - int bank; - int irq; - spinlock_t lvl_lock[4]; -#ifdef CONFIG_PM - u32 cnf[4]; - u32 out[4]; - u32 oe[4]; - u32 int_enb[4]; - u32 int_lvl[4]; -#endif -}; - - -static struct tegra_gpio_bank tegra_gpio_banks[] = { - {.bank = 0, .irq = INT_GPIO1}, - {.bank = 1, .irq = INT_GPIO2}, - {.bank = 2, .irq = INT_GPIO3}, - {.bank = 3, .irq = INT_GPIO4}, - {.bank = 4, .irq = INT_GPIO5}, - {.bank = 5, .irq = INT_GPIO6}, - {.bank = 6, .irq = INT_GPIO7}, -}; - -static int tegra_gpio_compose(int bank, int port, int bit) -{ - return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); -} - -static void tegra_gpio_mask_write(u32 reg, int gpio, int value) -{ - u32 val; - - val = 0x100 << GPIO_BIT(gpio); - if (value) - val |= 1 << GPIO_BIT(gpio); - __raw_writel(val, reg); -} - -void tegra_gpio_enable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); -} - -void tegra_gpio_disable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); -} - -static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value); -} - -static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1; -} - -static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0); - return 0; -} - -static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - tegra_gpio_set(chip, offset, value); - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1); - return 0; -} - - - -static struct gpio_chip tegra_gpio_chip = { - .label = "tegra-gpio", - .direction_input = tegra_gpio_direction_input, - .get = tegra_gpio_get, - .direction_output = tegra_gpio_direction_output, - .set = tegra_gpio_set, - .base = 0, - .ngpio = TEGRA_NR_GPIOS, -}; - -static void tegra_gpio_irq_ack(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); -} - -static void tegra_gpio_irq_mask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); -} - -static void tegra_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); -} - -static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - INT_GPIO_BASE; - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - int port = GPIO_PORT(gpio); - int lvl_type; - int val; - unsigned long flags; - - switch (type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_RISING: - lvl_type = GPIO_INT_LVL_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - lvl_type = GPIO_INT_LVL_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - lvl_type = GPIO_INT_LVL_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_HIGH: - lvl_type = GPIO_INT_LVL_LEVEL_HIGH; - break; - - case IRQ_TYPE_LEVEL_LOW: - lvl_type = GPIO_INT_LVL_LEVEL_LOW; - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&bank->lvl_lock[port], flags); - - val = __raw_readl(GPIO_INT_LVL(gpio)); - val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); - val |= lvl_type << GPIO_BIT(gpio); - __raw_writel(val, GPIO_INT_LVL(gpio)); - - spin_unlock_irqrestore(&bank->lvl_lock[port], flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return 0; -} - -static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct tegra_gpio_bank *bank; - int port; - int pin; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); - - for (port = 0; port < 4; port++) { - int gpio = tegra_gpio_compose(bank->bank, port, 0); - unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) & - __raw_readl(GPIO_INT_ENB(gpio)); - u32 lvl = __raw_readl(GPIO_INT_LVL(gpio)); - - for_each_set_bit(pin, &sta, 8) { - __raw_writel(1 << pin, GPIO_INT_CLR(gpio)); - - /* if gpio is edge triggered, clear condition - * before executing the hander so that we don't - * miss edges - */ - if (lvl & (0x100 << pin)) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - generic_handle_irq(gpio_to_irq(gpio + pin)); - } - } - - if (!unmasked) - chained_irq_exit(chip, desc); - -} - -#ifdef CONFIG_PM -void tegra_gpio_resume(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); - __raw_writel(bank->out[p], GPIO_OUT(gpio)); - __raw_writel(bank->oe[p], GPIO_OE(gpio)); - __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); - __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); - } - } - - local_irq_restore(flags); -} - -void tegra_gpio_suspend(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); - bank->out[p] = __raw_readl(GPIO_OUT(gpio)); - bank->oe[p] = __raw_readl(GPIO_OE(gpio)); - bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); - bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); - } - } - local_irq_restore(flags); -} - -static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - return irq_set_irq_wake(bank->irq, enable); -} -#endif - -static struct irq_chip tegra_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = tegra_gpio_irq_ack, - .irq_mask = tegra_gpio_irq_mask, - .irq_unmask = tegra_gpio_irq_unmask, - .irq_set_type = tegra_gpio_irq_set_type, -#ifdef CONFIG_PM - .irq_set_wake = tegra_gpio_wake_enable, -#endif -}; - - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int __init tegra_gpio_init(void) -{ - struct tegra_gpio_bank *bank; - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - __raw_writel(0x00, GPIO_INT_ENB(gpio)); - } - } - - gpiochip_add(&tegra_gpio_chip); - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; - - irq_set_lockdep_class(i, &gpio_lock_class); - irq_set_chip_data(i, bank); - irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, - handle_simple_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { - bank = &tegra_gpio_banks[i]; - - irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); - - for (j = 0; j < 4; j++) - spin_lock_init(&bank->lvl_lock[j]); - } - - return 0; -} - -postcore_initcall(tegra_gpio_init); - -void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) -{ - int i; - - for (i = 0; i < num; i++) { - int gpio = table[i].gpio; - - if (table[i].enable) - tegra_gpio_enable(gpio); - else - tegra_gpio_disable(gpio); - } -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - seq_printf(s, - "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", - i, j, - __raw_readl(GPIO_CNF(gpio)), - __raw_readl(GPIO_OE(gpio)), - __raw_readl(GPIO_OUT(gpio)), - __raw_readl(GPIO_IN(gpio)), - __raw_readl(GPIO_INT_STA(gpio)), - __raw_readl(GPIO_INT_ENB(gpio)), - __raw_readl(GPIO_INT_LVL(gpio))); - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init tegra_gpio_debuginit(void) -{ - (void) debugfs_create_file("tegra_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(tegra_gpio_debuginit); -#endif diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h index c34f3ea3017c..4f50ca8f901e 100644 --- a/arch/arm/mach-u300/clock.h +++ b/arch/arm/mach-u300/clock.h @@ -31,7 +31,7 @@ struct clk { bool reset; __u16 clk_val; __s8 usecount; - __u32 res_reg; + void __iomem * res_reg; __u16 res_mask; bool hw_ctrld; diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h index 8b85df4c8d8f..035fdc9dbdb0 100644 --- a/arch/arm/mach-u300/include/mach/u300-regs.h +++ b/arch/arm/mach-u300/include/mach/u300-regs.h @@ -18,6 +18,12 @@ * the defines are used for setting up the I/O memory mapping. */ +#ifdef __ASSEMBLER__ +#define IOMEM(a) (a) +#else +#define IOMEM(a) (void __iomem *) a +#endif + /* NAND Flash CS0 */ #define U300_NAND_CS0_PHYS_BASE 0x80000000 @@ -48,13 +54,6 @@ #endif /* - * All the following peripherals are specified at their PHYSICAL address, - * so if you need to access them (in the kernel), you MUST use the macros - * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST() - * etc. - */ - -/* * AHB peripherals */ @@ -63,11 +62,11 @@ /* Vectored Interrupt Controller 0, servicing 32 interrupts */ #define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000) -#define U300_INTCON0_VBASE (U300_AHB_PER_VIRT_BASE+0x1000) +#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000) /* Vectored Interrupt Controller 1, servicing 32 interrupts */ #define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000) -#define U300_INTCON1_VBASE (U300_AHB_PER_VIRT_BASE+0x2000) +#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000) /* Memory Stick Pro (MSPRO) controller */ #define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000) @@ -115,7 +114,7 @@ /* SYSCON */ #define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000) -#define U300_SYSCON_VBASE (U300_SLOW_PER_VIRT_BASE+0x1000) +#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000) /* Watchdog */ #define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000) @@ -125,7 +124,7 @@ /* APP side special timer */ #define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000) -#define U300_TIMER_APP_VBASE (U300_SLOW_PER_VIRT_BASE+0x4000) +#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000) /* Keypad */ #define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000) @@ -181,5 +180,4 @@ * Virtual accessor macros for static devices */ - #endif diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 891cf44591e0..18d7fa0603c2 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -411,8 +411,7 @@ static void __init u300_timer_init(void) /* Use general purpose timer 2 as clock source */ if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC, "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) - printk(KERN_ERR "timer: failed to initialize clock " - "source %s\n", clocksource_u300_1mhz.name); + pr_err("timer: failed to initialize U300 clock source\n"); clockevents_calc_mult_shift(&clockevent_u300_1mhz, rate, APPTIMER_MIN_RANGE); diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index fd4cf1ca5efd..70cdbd60596a 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -110,10 +110,18 @@ static pin_cfg_t mop500_pins_common[] = { GPIO168_KP_O0, /* UART */ - GPIO0_U0_CTSn | PIN_INPUT_PULLUP, - GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, - GPIO2_U0_RXD | PIN_INPUT_PULLUP, - GPIO3_U0_TXD | PIN_OUTPUT_HIGH, + /* uart-0 pins gpio configuration should be + * kept intact to prevent glitch in tx line + * when tty dev is opened. Later these pins + * are configured to uart mop500_pins_uart0 + * + * It will be replaced with uart configuration + * once the issue is solved. + */ + GPIO0_GPIO | PIN_INPUT_PULLUP, + GPIO1_GPIO | PIN_OUTPUT_HIGH, + GPIO2_GPIO | PIN_INPUT_PULLUP, + GPIO3_GPIO | PIN_OUTPUT_HIGH, GPIO29_U2_RXD | PIN_INPUT_PULLUP, GPIO30_U2_TXD | PIN_OUTPUT_HIGH, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index bb26f40493e6..2a08c07dec6d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -27,18 +27,21 @@ #include <linux/leds-lp5521.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/delay.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/i2c.h> #include <plat/ste_dma40.h> +#include <plat/pincfg.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "pins-db8500.h" #include "ste-dma40-db8500.h" #include "devices-db8500.h" #include "board-mop500.h" @@ -393,12 +396,63 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif + +static pin_cfg_t mop500_pins_uart0[] = { + GPIO0_U0_CTSn | PIN_INPUT_PULLUP, + GPIO1_U0_RTSn | PIN_OUTPUT_HIGH, + GPIO2_U0_RXD | PIN_INPUT_PULLUP, + GPIO3_U0_TXD | PIN_OUTPUT_HIGH, +}; + +#define PRCC_K_SOFTRST_SET 0x18 +#define PRCC_K_SOFTRST_CLEAR 0x1C +static void ux500_uart0_reset(void) +{ + void __iomem *prcc_rst_set, *prcc_rst_clr; + + prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_SET); + prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE + + PRCC_K_SOFTRST_CLEAR); + + /* Activate soft reset PRCC_K_SOFTRST_CLEAR */ + writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr); + udelay(1); + + /* Release soft reset PRCC_K_SOFTRST_SET */ + writel((readl(prcc_rst_set) | 0x1), prcc_rst_set); + udelay(1); +} + +static void ux500_uart0_init(void) +{ + int ret; + + ret = nmk_config_pins(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_enable failed\n"); +} + +static void ux500_uart0_exit(void) +{ + int ret; + + ret = nmk_config_pins_sleep(mop500_pins_uart0, + ARRAY_SIZE(mop500_pins_uart0)); + if (ret < 0) + pr_err("pl011: uart pins_disable failed\n"); +} + static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif + .init = ux500_uart0_init, + .exit = ux500_uart0_exit, + .reset = ux500_uart0_reset, }; static struct amba_pl011_data uart1_plat = { diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 285edcd2da2a..9e6b93b1a043 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = { }, }; -static void __init v2m_init_early(void) -{ - ct_desc->init_early(); - versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); -} - static void __init v2m_timer_init(void) { u32 scctrl; @@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = { }, }; +static void __init v2m_init_early(void) +{ + ct_desc->init_early(); + clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); +} + static void v2m_power_off(void) { if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0)) @@ -418,8 +419,6 @@ static void __init v2m_init(void) { int i; - clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups)); - platform_device_register(&v2m_pcie_i2c_device); platform_device_register(&v2m_ddc_i2c_device); platform_device_register(&v2m_flash_device); diff --git a/arch/arm/mach-vt8500/irq.c b/arch/arm/mach-vt8500/irq.c index 245140c0df10..642de0408f25 100644 --- a/arch/arm/mach-vt8500/irq.c +++ b/arch/arm/mach-vt8500/irq.c @@ -39,9 +39,10 @@ static void __iomem *ic_regbase; static void __iomem *sic_regbase; -static void vt8500_irq_mask(unsigned int irq) +static void vt8500_irq_mask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 edge; if (irq >= 64) { @@ -64,9 +65,10 @@ static void vt8500_irq_mask(unsigned int irq) } } -static void vt8500_irq_unmask(unsigned int irq) +static void vt8500_irq_unmask(struct irq_data *d) { void __iomem *base = ic_regbase; + unsigned irq = d->irq; u8 dctr; if (irq >= 64) { @@ -78,10 +80,11 @@ static void vt8500_irq_unmask(unsigned int irq) writeb(dctr, base + VT8500_IC_DCTR + irq); } -static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) +static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type) { void __iomem *base = ic_regbase; - unsigned int orig_irq = irq; + unsigned irq = d->irq; + unsigned orig_irq = irq; u8 dctr; if (irq >= 64) { @@ -114,11 +117,11 @@ static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type) } static struct irq_chip vt8500_irq_chip = { - .name = "vt8500", - .ack = vt8500_irq_mask, - .mask = vt8500_irq_mask, - .unmask = vt8500_irq_unmask, - .set_type = vt8500_irq_set_type, + .name = "vt8500", + .irq_ack = vt8500_irq_mask, + .irq_mask = vt8500_irq_mask, + .irq_unmask = vt8500_irq_unmask, + .irq_set_type = vt8500_irq_set_type, }; void __init vt8500_init_irq(void) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index ef59099a5463..44c086710d2b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -120,17 +120,22 @@ static void l2x0_cache_sync(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_flush_all(void) +static void __l2x0_flush_all(void) { - unsigned long flags; - - /* clean all ways */ - spin_lock_irqsave(&l2x0_lock, flags); debug_writel(0x03); writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY); cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask); cache_sync(); debug_writel(0x00); +} + +static void l2x0_flush_all(void) +{ + unsigned long flags; + + /* clean all ways */ + spin_lock_irqsave(&l2x0_lock, flags); + __l2x0_flush_all(); spin_unlock_irqrestore(&l2x0_lock, flags); } @@ -266,7 +271,9 @@ static void l2x0_disable(void) unsigned long flags; spin_lock_irqsave(&l2x0_lock, flags); - writel(0, l2x0_base + L2X0_CTRL); + __l2x0_flush_all(); + writel_relaxed(0, l2x0_base + L2X0_CTRL); + dsb(); spin_unlock_irqrestore(&l2x0_lock, flags); } diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 8bfae964b133..b0ee9ba3cfab 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. + * to run in. We reserve version 0 for initial tasks so we will + * always allocate an ASID. The ASID 0 is reserved for the TTBR + * register changing sequence. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - u32 ttb; - /* Copy TTBR1 into TTBR0 */ - asm volatile("mrc p15, 0, %0, c2, c0, 1\n" - "mcr p15, 0, %0, c2, c0, 0" - : "=r" (ttb)); + /* set the reserved ASID before flushing the TLB */ + asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -94,7 +93,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu; + asid = cpu_last_asid + cpu + 1; flush_context(); set_mm_context(mm, asid); @@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id(); + asid = cpu_last_asid + smp_processor_id() + 1; flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS - 1; + cpu_last_asid += NR_CPUS; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 2c2cce9cd8c8..c19571c40a21 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -331,6 +331,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif #ifdef CONFIG_BLK_DEV_INITRD if (phys_initrd_size && + !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) { + pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n", + phys_initrd_start, phys_initrd_size); + phys_initrd_start = phys_initrd_size = 0; + } + if (phys_initrd_size && memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) { pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n", phys_initrd_start, phys_initrd_size); @@ -635,7 +641,8 @@ void __init mem_init(void) " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" - " .data : 0x%p" " - 0x%p" " (%4d kB)\n", + " .data : 0x%p" " - 0x%p" " (%4d kB)\n" + " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) + (PAGE_SIZE)), @@ -657,7 +664,8 @@ void __init mem_init(void) MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), - MLK_ROUNDUP(_sdata, _edata)); + MLK_ROUNDUP(_sdata, _edata), + MLK_ROUNDUP(__bss_start, __bss_stop)); #undef MLK #undef MLM diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d9e736c2b4f..594d677b92c8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -759,7 +759,7 @@ early_param("vmalloc", early_vmalloc); static phys_addr_t lowmem_limit __initdata = 0; -static void __init sanity_check_meminfo(void) +void __init sanity_check_meminfo(void) { int i, j, highmem = 0; @@ -1032,8 +1032,9 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; + memblock_set_current_limit(lowmem_limit); + build_mem_type_table(); - sanity_check_meminfo(); prepare_page_table(); map_lowmem(); devicemaps_init(mdesc); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 687d02319a41..941a98c9e8aa 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -27,6 +27,10 @@ void __init arm_mm_memblock_reserve(void) memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE); } +void __init sanity_check_meminfo(void) +{ +} + /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index e4c165ca6696..537ffcb0646d 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -146,7 +146,7 @@ __arm7tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm7tdmi_proc_info, . - __arm7dmi_proc_info + .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info .type __triscenda7_proc_info, #object __triscenda7_proc_info: diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 7b7ebd4d096d..546b54da1005 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -116,7 +116,7 @@ __arm9tdmi_proc_info: .long 0 .long 0 .long v4_cache_fns - .size __arm9tdmi_proc_info, . - __arm9dmi_proc_info + .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info .type __p2001_proc_info, #object __p2001_proc_info: diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b3b566ec83d3..089c0b5e454f 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif - mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 - mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 +#ifdef CONFIG_ARM_ERRATA_754322 + dsb +#endif + mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID + isb +1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb - mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 - isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -208,19 +210,21 @@ cpu_v7_name: /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size -.equ cpu_v7_suspend_size, 4 * 8 +.equ cpu_v7_suspend_size, 4 * 9 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID mrc p15, 0, r5, c13, c0, 1 @ Context ID + mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID + stmia r0!, {r4 - r6} mrc p15, 0, r6, c3, c0, 0 @ Domain ID mrc p15, 0, r7, c2, c0, 0 @ TTB 0 mrc p15, 0, r8, c2, c0, 1 @ TTB 1 mrc p15, 0, r9, c1, c0, 0 @ Control register mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control - stmia r0, {r4 - r11} + stmia r0, {r6 - r11} ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_v7_do_suspend) @@ -228,9 +232,11 @@ ENTRY(cpu_v7_do_resume) mov ip, #0 mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache - ldmia r0, {r4 - r11} + ldmia r0!, {r4 - r6} mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID mcr p15, 0, r5, c13, c0, 1 @ Context ID + mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID + ldmia r0, {r6 - r11} mcr p15, 0, r6, c3, c0, 0 @ Domain ID mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 @@ -416,9 +422,9 @@ ENTRY(v7_processor_functions) .word cpu_v7_dcache_clean_area .word cpu_v7_switch_mm .word cpu_v7_set_pte_ext - .word 0 - .word 0 - .word 0 + .word cpu_v7_suspend_size + .word cpu_v7_do_suspend + .word cpu_v7_do_resume .size v7_processor_functions, . - v7_processor_functions .section ".rodata" diff --git a/arch/arm/plat-iop/cp6.c b/arch/arm/plat-iop/cp6.c index 9612a87e2a88..bab73e2c79db 100644 --- a/arch/arm/plat-iop/cp6.c +++ b/arch/arm/plat-iop/cp6.c @@ -18,6 +18,7 @@ */ #include <linux/init.h> #include <asm/traps.h> +#include <asm/ptrace.h> static int cp6_trap(struct pt_regs *regs, unsigned int instr) { diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a1387875a491..d53c35fe2ea7 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b6096a08..fb166b20f60f 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,14 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + return device_register(&mxc_aips_bus); +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922acf480..b41bf972b54b 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index ccc789e21daa..4fc6ffc2a13e 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c index 59c33f6e401c..23ce08e6ffd2 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 000000000000..a7919a241032 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index 3538b85ede91..b130f60ca6b7 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = { #endif #ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51_to1 = { +static struct sdma_script_start_addrs addr_imx51 = { .ap_2_ap_addr = 642, .uart_2_mcu_addr = 817, .mcu_2_app_addr = 747, @@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void) #if defined(CONFIG_SOC_IMX51) if (cpu_is_mx51()) { - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1; + int to_version = mx51_revision() >> 4; + imx51_imx_sdma_data.pdata.to_version = to_version; + imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; ret = imx_add_imx_sdma(&imx51_imx_sdma_data); } else #endif diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c index 79a1cb18a5b0..2b0b5e0aa998 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index edf65034aea5..79d340ae0af1 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c index cc488f4b6204..e1763e03e7cb 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 90d762f6f93b..540d3a7d92df 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f686f6..000000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..4e3d97890d69 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..03f626645374 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -10,6 +10,8 @@ #include <linux/platform_device.h> #include <linux/init.h> +extern struct device mxc_aips_bus; + struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include <asm-generic/gpio.h> + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80 diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index c44886062f8e..685c78716d95 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -10,6 +10,7 @@ #define STE_DMA40_H #include <linux/dmaengine.h> +#include <linux/scatterlist.h> #include <linux/workqueue.h> #include <linux/interrupt.h> diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index ec97e00cb581..91e8de3db085 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,12 +174,32 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqenable; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + + bool irqenable_inv; +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + + struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index a37b8eb65b76..49fc0df0c21f 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -84,6 +84,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/clkdev.h> +#include <linux/pm_runtime.h> #include <plat/omap_device.h> #include <plat/omap_hwmod.h> @@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od) static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; + + ret = pm_generic_runtime_suspend(dev); + + if (!ret) + omap_device_idle(pdev); + + return ret; +} - return omap_device_idle(pdev); +static int _od_runtime_idle(struct device *dev) +{ + return pm_generic_runtime_idle(dev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - return omap_device_enable(pdev); + omap_device_enable(pdev); + + return pm_generic_runtime_resume(dev); } static struct dev_power_domain omap_device_power_domain = { .ops = { .runtime_suspend = _od_runtime_suspend, + .runtime_idle = _od_runtime_idle, .runtime_resume = _od_runtime_resume, USE_PLATFORM_PM_SLEEP_OPS } diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 5b4fffab1eb4..41ab97ebe4cf 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -432,7 +432,7 @@ void __init orion_gpio_init(int gpio_base, int ngpio, ct->regs.mask = ochip->mask_offset + GPIO_EDGE_MASK_OFF; ct->regs.ack = GPIO_EDGE_CAUSE_OFF; ct->type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_clr_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = gpio_irq_set_type; diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c index 48ebb9479b61..a11dc3670505 100644 --- a/arch/arm/plat-pxa/gpio.c +++ b/arch/arm/plat-pxa/gpio.c @@ -50,7 +50,7 @@ static inline void __iomem *gpio_chip_base(struct gpio_chip *c) return container_of(c, struct pxa_gpio_chip, chip)->regbase; } -static inline struct pxa_gpio_chip *gpio_to_chip(unsigned gpio) +static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio) { return &pxa_gpio_chips[gpio_to_bank(gpio)]; } @@ -161,7 +161,7 @@ static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type) int gpio = irq_to_gpio(d->irq); unsigned long gpdr, mask = GPIO_bit(gpio); - c = gpio_to_chip(gpio); + c = gpio_to_pxachip(gpio); if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or @@ -230,7 +230,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc) static void pxa_ack_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET); } @@ -238,7 +238,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d) static void pxa_mask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); uint32_t grer, gfer; c->irq_mask &= ~GPIO_bit(gpio); @@ -252,7 +252,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = irq_to_gpio(d->irq); - struct pxa_gpio_chip *c = gpio_to_chip(gpio); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); c->irq_mask |= GPIO_bit(gpio); update_edge_detect(c); diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h deleted file mode 100644 index 1ab332e37d7d..000000000000 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-pxa/include/plat/sdhci.h - * - * Copyright 2010 Marvell - * Zhangfei Gao <zhangfei.gao@marvell.com> - * - * PXA Platform - SDHCI platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_PXA_SDHCI_H -#define __PLAT_PXA_SDHCI_H - -/* pxa specific flag */ -/* Require clock free running */ -#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) - -/* Board design supports 8-bit data on SD/SDIO BUS */ -#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) - -/* - * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI - * @max_speed: the maximum speed supported - * @quirks: quirks of specific device - * @flags: flags for platform requirement - */ -struct sdhci_pxa_platdata { - unsigned int max_speed; - unsigned int quirks; - unsigned int flags; -}; - -#endif /* __PLAT_PXA_SDHCI_H */ diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 2abf9660bc6c..539bd0e3defd 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -712,7 +712,7 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, +int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *client, void *dev) { @@ -783,7 +783,7 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) +int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned long flags; @@ -974,7 +974,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan) } int -s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op) +s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1021,23 +1021,19 @@ EXPORT_SYMBOL(s3c2410_dma_ctrl); * xfersize: size of unit in bytes (1,2,4) */ -int s3c2410_dma_config(unsigned int channel, +int s3c2410_dma_config(enum dma_ch channel, int xferunit) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); unsigned int dcon; - pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", - __func__, channel, xferunit, dcon); + pr_debug("%s: chan=%d, xfer_unit=%d\n", __func__, channel, xferunit); if (chan == NULL) return -EINVAL; - pr_debug("%s: Initial dcon is %08x\n", __func__, dcon); - dcon = chan->dcon & dma_sel.dcon_mask; - - pr_debug("%s: New dcon is %08x\n", __func__, dcon); + pr_debug("%s: dcon is %08x\n", __func__, dcon); switch (chan->req_ch) { case DMACH_I2S_IN: @@ -1104,7 +1100,7 @@ EXPORT_SYMBOL(s3c2410_dma_config); * devaddr: physical address of the source */ -int s3c2410_dma_devconfig(unsigned int channel, +int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr) { @@ -1177,7 +1173,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); * returns the current transfer points for the dma source and destination */ -int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst) +int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dst) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1235,7 +1231,7 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) /* restore channel's hardware configuration */ if (!cp->in_use) - return 0; + return; printk(KERN_INFO "dma%d: restoring configuration\n", cp->number); @@ -1246,8 +1242,6 @@ static void s3c2410_dma_resume_chan(struct s3c2410_dma_chan *cp) if (cp->map != NULL) dma_sel.select(cp, cp->map); - - return 0; } static void s3c2410_dma_resume(void) diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 135abda31c9a..327ab9f662e8 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -152,7 +152,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) if (!gc) return -ENOMEM; ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->chip.irq_set_type = s5p_gpioint_set_type, diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index 899a8cc011ff..612934c48b0d 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -370,11 +370,11 @@ static void __init s5p_clocksource_init(void) clock_rate = clk_get_rate(tin_source); - init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - s5p_time_setup(timer_source.source_id, TCNT_MAX); s5p_time_start(timer_source.source_id, PERIODIC); + init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); + if (clocksource_register_hz(&time_clocksource, clock_rate)) panic("%s: can't register clocksource\n", time_clocksource.name); } diff --git a/arch/arm/plat-samsung/dma.c b/arch/arm/plat-samsung/dma.c index cb459dd95459..6143aa147688 100644 --- a/arch/arm/plat-samsung/dma.c +++ b/arch/arm/plat-samsung/dma.c @@ -41,7 +41,7 @@ struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel) * irq? */ -int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) +int s3c2410_dma_set_opfn(enum dma_ch channel, s3c2410_dma_opfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -56,7 +56,7 @@ int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_opfn); -int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) +int s3c2410_dma_set_buffdone_fn(enum dma_ch channel, s3c2410_dma_cbfn_t rtn) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -71,7 +71,7 @@ int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn) } EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); -int s3c2410_dma_setflags(unsigned int channel, unsigned int flags) +int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 4af108ff4112..e3b31c26ac3e 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -12,6 +12,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __PLAT_DEVS_H +#define __PLAT_DEVS_H __FILE__ + #include <linux/platform_device.h> struct s3c24xx_uart_resources { @@ -159,3 +163,5 @@ extern struct platform_device s3c_device_ac97; */ extern void *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev); + +#endif /* __PLAT_DEVS_H */ diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 2e8f8c6560d7..8c273b7a6f56 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -42,6 +42,7 @@ struct s3c2410_dma_client { }; struct s3c2410_dma_chan; +enum dma_ch; /* s3c2410_dma_cbfn_t * @@ -62,7 +63,7 @@ typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, * request a dma channel exclusivley */ -extern int s3c2410_dma_request(unsigned int channel, +extern int s3c2410_dma_request(enum dma_ch channel, struct s3c2410_dma_client *, void *dev); @@ -71,14 +72,14 @@ extern int s3c2410_dma_request(unsigned int channel, * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op); +extern int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * * set the channel's flags to a given state */ -extern int s3c2410_dma_setflags(unsigned int channel, +extern int s3c2410_dma_setflags(enum dma_ch channel, unsigned int flags); /* s3c2410_dma_free @@ -86,7 +87,7 @@ extern int s3c2410_dma_setflags(unsigned int channel, * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); +extern int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -95,7 +96,7 @@ extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *); * drained before the buffer is given to the DMA system. */ -extern int s3c2410_dma_enqueue(unsigned int channel, void *id, +extern int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size); /* s3c2410_dma_config @@ -103,14 +104,14 @@ extern int s3c2410_dma_enqueue(unsigned int channel, void *id, * configure the dma channel */ -extern int s3c2410_dma_config(unsigned int channel, int xferunit); +extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); /* s3c2410_dma_devconfig * * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(unsigned int channel, +extern int s3c2410_dma_devconfig(enum dma_ch channel, enum s3c2410_dmasrc source, unsigned long devaddr); /* s3c2410_dma_getposition @@ -118,10 +119,10 @@ extern int s3c2410_dma_devconfig(unsigned int channel, * get the position that the dma transfer is currently at */ -extern int s3c2410_dma_getposition(unsigned int channel, +extern int s3c2410_dma_getposition(enum dma_ch channel, dma_addr_t *src, dma_addr_t *dest); -extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn); -extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn); +extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); +extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index c151c5f94a87..116edfe120b9 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -224,6 +224,8 @@ #define S5PV210_UFSTAT_RXMASK (255<<0) #define S5PV210_UFSTAT_RXSHIFT (0) +#define NO_NEED_CHECK_CLKSRC 1 + #ifndef __ASSEMBLY__ /* struct s3c24xx_uart_clksrc diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index 0ffe34a21554..4c16fa3621bb 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -39,6 +39,7 @@ struct s3c64xx_spi_csinfo { * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 * @rx_lvl_offset: Depends on tx fifo_lvl field and bus number * @high_speed: If the controller supports HIGH_SPEED_EN bit + * @tx_st_done: Depends on tx fifo_lvl field */ struct s3c64xx_spi_info { int src_clk_nr; @@ -53,6 +54,7 @@ struct s3c64xx_spi_info { int fifo_lvl_mask; int rx_lvl_offset; int high_speed; + int tx_st_done; }; /** diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 32582c0958e3..657405c481d0 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -54,8 +54,15 @@ static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base, handle_level_irq); + + if (!gc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n", + __func__, uirq->base_irq); + return; + } + ct = gc->chip_types; - ct->chip.irq_ack = irq_gc_ack; + ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_set_bit; ct->chip.irq_unmask = irq_gc_mask_clr_bit; ct->regs.ack = S3C64XX_UINTP; diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index a607546ddbd0..f714d060370d 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -54,6 +54,13 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq) s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq, S3C64XX_TINT_CSTAT, handle_level_irq); + + if (!s3c_tgc) { + pr_err("%s: irq_alloc_generic_chip for IRQ %d failed\n", + __func__, timer_irq); + return; + } + ct = s3c_tgc->chip_types; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 6f9ca56de1f6..a06bfccc2840 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index 7eece0af34c9..d8f1fe80d210 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index 387eb9d6e423..d4c5b19ec950 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig index 19f6ceeeff7b..77ca4f905d2c 100644 --- a/arch/avr32/configs/atngw100_mrmt_defconfig +++ b/arch/avr32/configs/atngw100_mrmt_defconfig @@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_SLUB_DEBUG is not set @@ -109,7 +110,7 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_AT32AP700X=m CONFIG_DMADEVICES=y diff --git a/arch/avr32/configs/atngw100mkii_defconfig b/arch/avr32/configs/atngw100mkii_defconfig index f0fe237133a9..6e0dca4d3131 100644 --- a/arch/avr32/configs/atngw100mkii_defconfig +++ b/arch/avr32/configs/atngw100mkii_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig index e4a7c1dc8380..7f2a344a5fa8 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd100_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig index 6f37f70c2c37..085eeba88f67 100644 --- a/arch/avr32/configs/atngw100mkii_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100mkii_evklcd101_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 4fb01f5ab42f..d1a887e64055 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 9faaf9b900f2..956f2819ad45 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 3d2a5d85f970..40c69f38c61a 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 1ed8f22d4fe2..511eb8af356d 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -5,6 +5,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index aeadc955db32..19973b06170c 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -6,6 +6,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 1692beeb7ed3..6f45681196d1 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/configs/merisc_defconfig b/arch/avr32/configs/merisc_defconfig index 8b670a6530bf..3befab966827 100644 --- a/arch/avr32/configs/merisc_defconfig +++ b/arch/avr32/configs/merisc_defconfig @@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set CONFIG_MODULES=y diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig index 5a51f2e7ffb9..1bee51f22154 100644 --- a/arch/avr32/configs/mimc200_defconfig +++ b/arch/avr32/configs/mimc200_defconfig @@ -7,6 +7,7 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_BASE_FULL is not set # CONFIG_COMPAT_BRK is not set diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h index 49a88f5a9d2f..108502bc6770 100644 --- a/arch/avr32/include/asm/processor.h +++ b/arch/avr32/include/asm/processor.h @@ -131,7 +131,6 @@ struct thread_struct { */ #define start_thread(regs, new_pc, new_sp) \ do { \ - set_fs(USER_DS); \ memset(regs, 0, sizeof(*regs)); \ regs->sr = MODE_USER; \ regs->pc = new_pc & ~1; \ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index aa677e2a3823..7fbf0dcb9afe 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1043,8 +1043,9 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } + pdev->id = line; pdata = pdev->dev.platform_data; - pdata->num = portnr; + pdata->num = line; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 9c96a130f3a8..8181293115e4 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -31,8 +31,20 @@ #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) #define cpu_is_at91cap9() (0) +#define cpu_is_at91cap9_revB() (0) +#define cpu_is_at91cap9_revC() (0) #define cpu_is_at91sam9g10() (0) +#define cpu_is_at91sam9g20() (0) #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) +#define cpu_is_at91sam9x5() (0) +#define cpu_is_at91sam9g15() (0) +#define cpu_is_at91sam9g35() (0) +#define cpu_is_at91sam9x35() (0) +#define cpu_is_at91sam9g25() (0) +#define cpu_is_at91sam9x25() (0) #endif /* __ASM_ARCH_CPU_H */ diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index 3e3646186c9f..c9ac2f8e8f64 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -167,14 +167,12 @@ static int intc_suspend(void) return 0; } -static int intc_resume(void) +static void intc_resume(void) { int i; for (i = 0; i < 64; i++) intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]); - - return 0; } #else #define intc_suspend NULL diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 31d954216c05..9f1d08401fca 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -112,7 +112,7 @@ CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m CONFIG_MMC=m CONFIG_SDH_BFIN=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_BFIN=m CONFIG_EXT2_FS=m # CONFIG_DNOTIFY is not set diff --git a/arch/m32r/include/asm/mmzone.h b/arch/m32r/include/asm/mmzone.h index 9f3b5accda88..115ced33febd 100644 --- a/arch/m32r/include/asm/mmzone.h +++ b/arch/m32r/include/asm/mmzone.h @@ -14,12 +14,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) #define node_localnr(pfn, nid) ((pfn) - NODE_DATA(nid)->node_start_pfn) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages - 1; \ -}) #define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) /* @@ -44,7 +38,7 @@ static __inline__ int pfn_to_nid(unsigned long pfn) int node; for (node = 0 ; node < MAX_NUMNODES ; node++) - if (pfn >= node_start_pfn(node) && pfn <= node_end_pfn(node)) + if (pfn >= node_start_pfn(node) && pfn < node_end_pfn(node)) break; return node; diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu index fc98f9b9d4d2..b004dc1b1710 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.nommu @@ -14,6 +14,33 @@ config GENERIC_CLOCKEVENTS bool default n +config M68000 + bool + help + The Freescale (was Motorola) 68000 CPU is the first generation of + the well known M68K family of processors. The CPU core as well as + being available as a stand alone CPU was also used in many + System-On-Chip devices (eg 68328, 68302, etc). It does not contain + a paging MMU. + +config MCPU32 + bool + help + The Freescale (was then Motorola) CPU32 is a CPU core that is + based on the 68020 processor. For the most part it is used in + System-On-Chip parts, and does not contain a paging MMU. + +config COLDFIRE + bool + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + The Freescale ColdFire family of processors is a modern derivitive + of the 68000 processor family. They are mainly targeted at embedded + applications, and are all System-On-Chip (SOC) devices, as opposed + to stand alone CPUs. They implement a subset of the original 68000 + processor instruction set. + config COLDFIRE_SW_A7 bool default n @@ -36,26 +63,31 @@ choice config M68328 bool "MC68328" + select M68000 help Motorola 68328 processor support. config M68EZ328 bool "MC68EZ328" + select M68000 help Motorola 68EX328 processor support. config M68VZ328 bool "MC68VZ328" + select M68000 help Motorola 68VZ328 processor support. config M68360 bool "MC68360" + select MCPU32 help Motorola 68360 processor support. config M5206 bool "MCF5206" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -63,6 +95,7 @@ config M5206 config M5206e bool "MCF5206e" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -70,6 +103,7 @@ config M5206e config M520x bool "MCF520x" + select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT help @@ -77,6 +111,7 @@ config M520x config M523x bool "MCF523x" + select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -85,6 +120,7 @@ config M523x config M5249 bool "MCF5249" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -92,6 +128,7 @@ config M5249 config M5271 bool "MCF5271" + select COLDFIRE select HAVE_CACHE_SPLIT select HAVE_IPSBAR help @@ -99,6 +136,7 @@ config M5271 config M5272 bool "MCF5272" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_MBAR help @@ -106,6 +144,7 @@ config M5272 config M5275 bool "MCF5275" + select COLDFIRE select HAVE_CACHE_SPLIT select HAVE_IPSBAR help @@ -113,6 +152,7 @@ config M5275 config M528x bool "MCF528x" + select COLDFIRE select GENERIC_CLOCKEVENTS select HAVE_CACHE_SPLIT select HAVE_IPSBAR @@ -121,6 +161,7 @@ config M528x config M5307 bool "MCF5307" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_CACHE_CB select HAVE_MBAR @@ -129,12 +170,14 @@ config M5307 config M532x bool "MCF532x" + select COLDFIRE select HAVE_CACHE_CB help Freescale (Motorola) ColdFire 532x processor support. config M5407 bool "MCF5407" + select COLDFIRE select COLDFIRE_SW_A7 select HAVE_CACHE_CB select HAVE_MBAR @@ -143,6 +186,7 @@ config M5407 config M547x bool "MCF547x" + select COLDFIRE select HAVE_CACHE_CB select HAVE_MBAR help @@ -150,6 +194,7 @@ config M547x config M548x bool "MCF548x" + select COLDFIRE select HAVE_CACHE_CB select HAVE_MBAR help @@ -168,13 +213,6 @@ config M54xx depends on (M548x || M547x) default y -config COLDFIRE - bool - depends on (M5206 || M5206e || M520x || M523x || M5249 || M527x || M5272 || M528x || M5307 || M532x || M5407 || M54xx) - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - default y - config CLOCK_SET bool "Enable setting the CPU clock frequency" default n diff --git a/arch/m68k/emu/nfeth.c b/arch/m68k/emu/nfeth.c index 8b6e201b2c20..c5748bb4ea71 100644 --- a/arch/m68k/emu/nfeth.c +++ b/arch/m68k/emu/nfeth.c @@ -16,6 +16,7 @@ #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/interrupt.h> #include <linux/module.h> #include <asm/natfeat.h> #include <asm/virtconvert.h> @@ -204,7 +205,6 @@ static struct net_device * __init nfeth_probe(int unit) dev->irq = nfEtherIRQ; dev->netdev_ops = &nfeth_netdev_ops; - dev->flags |= NETIF_F_NO_CSUM; memcpy(dev->dev_addr, mac, ETH_ALEN); priv = netdev_priv(dev); diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index 33f82769547c..1b7a14d1a000 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -14,8 +14,7 @@ EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__muldi3); -#if !defined(__mc68020__) && !defined(__mc68030__) && \ - !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__) +#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) /* * Simpler 68k and ColdFire parts also need a few other gcc functions. */ diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S index f4d715cdca0e..7dc4087a9545 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux.lds_no.S @@ -84,52 +84,52 @@ SECTIONS { /* Kernel symbol table: Normal symbols */ . = ALIGN(4); __start___ksymtab = .; - *(__ksymtab) + *(SORT(___ksymtab+*)) __stop___ksymtab = .; /* Kernel symbol table: GPL-only symbols */ __start___ksymtab_gpl = .; - *(__ksymtab_gpl) + *(SORT(___ksymtab_gpl+*)) __stop___ksymtab_gpl = .; /* Kernel symbol table: Normal unused symbols */ __start___ksymtab_unused = .; - *(__ksymtab_unused) + *(SORT(___ksymtab_unused+*)) __stop___ksymtab_unused = .; /* Kernel symbol table: GPL-only unused symbols */ __start___ksymtab_unused_gpl = .; - *(__ksymtab_unused_gpl) + *(SORT(___ksymtab_unused_gpl+*)) __stop___ksymtab_unused_gpl = .; /* Kernel symbol table: GPL-future symbols */ __start___ksymtab_gpl_future = .; - *(__ksymtab_gpl_future) + *(SORT(___ksymtab_gpl_future+*)) __stop___ksymtab_gpl_future = .; /* Kernel symbol table: Normal symbols */ __start___kcrctab = .; - *(__kcrctab) + *(SORT(___kcrctab+*)) __stop___kcrctab = .; /* Kernel symbol table: GPL-only symbols */ __start___kcrctab_gpl = .; - *(__kcrctab_gpl) + *(SORT(___kcrctab_gpl+*)) __stop___kcrctab_gpl = .; /* Kernel symbol table: Normal unused symbols */ __start___kcrctab_unused = .; - *(__kcrctab_unused) + *(SORT(___kcrctab_unused+*)) __stop___kcrctab_unused = .; /* Kernel symbol table: GPL-only unused symbols */ __start___kcrctab_unused_gpl = .; - *(__kcrctab_unused_gpl) + *(SORT(___kcrctab_unused_gpl+*)) __stop___kcrctab_unused_gpl = .; /* Kernel symbol table: GPL-future symbols */ __start___kcrctab_gpl_future = .; - *(__kcrctab_gpl_future) + *(SORT(___kcrctab_gpl_future+*)) __stop___kcrctab_gpl_future = .; /* Kernel symbol table: strings */ diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c index 62182c81e91c..064889316974 100644 --- a/arch/m68k/lib/memcpy.c +++ b/arch/m68k/lib/memcpy.c @@ -34,8 +34,10 @@ void *memcpy(void *to, const void *from, size_t n) if (temp) { long *lto = to; const long *lfrom = from; -#if defined(__mc68020__) || defined(__mc68030__) || \ - defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) +#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) + for (; temp; temp--) + *lto++ = *lfrom++; +#else asm volatile ( " movel %2,%3\n" " andw #7,%3\n" @@ -56,9 +58,6 @@ void *memcpy(void *to, const void *from, size_t n) " jpl 4b" : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) : "0" (lfrom), "1" (lto), "2" (temp)); -#else - for (; temp; temp--) - *lto++ = *lfrom++; #endif to = lto; from = lfrom; diff --git a/arch/m68k/lib/memset.c b/arch/m68k/lib/memset.c index f649e6a2e644..8a7639f0a2fe 100644 --- a/arch/m68k/lib/memset.c +++ b/arch/m68k/lib/memset.c @@ -32,8 +32,10 @@ void *memset(void *s, int c, size_t count) temp = count >> 2; if (temp) { long *ls = s; -#if defined(__mc68020__) || defined(__mc68030__) || \ - defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) +#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) + for (; temp; temp--) + *ls++ = c; +#else size_t temp1; asm volatile ( " movel %1,%2\n" @@ -55,9 +57,6 @@ void *memset(void *s, int c, size_t count) " jpl 1b" : "=a" (ls), "=d" (temp), "=&d" (temp1) : "d" (c), "0" (ls), "1" (temp)); -#else - for (; temp; temp--) - *ls++ = c; #endif s = ls; } diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 079bafca073e..79e928a525d0 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -19,17 +19,7 @@ along with GNU CC; see the file COPYING. If not, write to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ -#if defined(__mc68020__) || defined(__mc68030__) || \ - defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) - -#define umul_ppmm(w1, w0, u, v) \ - __asm__ ("mulu%.l %3,%1:%0" \ - : "=d" ((USItype)(w0)), \ - "=d" ((USItype)(w1)) \ - : "%0" ((USItype)(u)), \ - "dmi" ((USItype)(v))) - -#else +#if defined(CONFIG_M68000) || defined(CONFIG_COLDFIRE) #define SI_TYPE_SIZE 32 #define __BITS4 (SI_TYPE_SIZE / 4) @@ -61,6 +51,15 @@ Boston, MA 02111-1307, USA. */ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ } while (0) +#else + +#define umul_ppmm(w1, w0, u, v) \ + __asm__ ("mulu%.l %3,%1:%0" \ + : "=d" ((USItype)(w0)), \ + "=d" ((USItype)(w1)) \ + : "%0" ((USItype)(u)), \ + "dmi" ((USItype)(v))) + #endif #define __umulsidi3(u, v) \ diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 37862b2ce363..807c97eed8a8 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -678,7 +678,7 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=m CONFIG_RTC_DRV_DS1307=m diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index c018696765d4..5c74eb797f08 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/spinlock.h> -#include <linux/sysdev.h> +#include <linux/syscore_ops.h> #include <linux/irq.h> #include <asm/i8259.h> @@ -215,14 +215,13 @@ spurious_8259A_irq: } } -static int i8259A_resume(struct sys_device *dev) +static void i8259A_resume(void) { if (i8259A_auto_eoi >= 0) init_8259A(i8259A_auto_eoi); - return 0; } -static int i8259A_shutdown(struct sys_device *dev) +static void i8259A_shutdown(void) { /* Put the i8259A into a quiescent state that * the kernel initialization code can get it @@ -232,26 +231,17 @@ static int i8259A_shutdown(struct sys_device *dev) outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-1 */ } - return 0; } -static struct sysdev_class i8259_sysdev_class = { - .name = "i8259", +static struct syscore_ops i8259_syscore_ops = { .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; -static struct sys_device device_i8259A = { - .id = 0, - .cls = &i8259_sysdev_class, -}; - static int __init i8259A_init_sysfs(void) { - int error = sysdev_class_register(&i8259_sysdev_class); - if (!error) - error = sysdev_register(&device_i8259A); - return error; + register_syscore_ops(&i8259_syscore_ops); + return 0; } device_initcall(i8259A_init_sysfs); diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h index 3d6e60dad9d9..780560b330d9 100644 --- a/arch/mn10300/include/asm/uaccess.h +++ b/arch/mn10300/include/asm/uaccess.h @@ -15,6 +15,7 @@ * User space memory access functions */ #include <linux/thread_info.h> +#include <linux/kernel.h> #include <asm/page.h> #include <asm/errno.h> diff --git a/arch/parisc/include/asm/mmzone.h b/arch/parisc/include/asm/mmzone.h index 9608d2cf214a..e67eb9c3d1bf 100644 --- a/arch/parisc/include/asm/mmzone.h +++ b/arch/parisc/include/asm/mmzone.h @@ -14,13 +14,6 @@ extern struct node_map_data node_data[]; #define NODE_DATA(nid) (&node_data[nid].pg_data) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - /* We have these possible memory map layouts: * Astro: 0-3.75, 67.75-68, 4-64 * zx1: 0-1, 257-260, 4-256 diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2729c6663d8a..cdf7a0a64406 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -134,6 +134,7 @@ config PPC select GENERIC_IRQ_SHOW_LEVEL select HAVE_RCU_TABLE_FREE if SMP select HAVE_SYSCALL_TRACEPOINTS + select HAVE_BPF_JIT if (PPC64 && NET) config EARLY_PRINTK bool diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b7212b619c52..b94740f36b1a 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -154,7 +154,8 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ \ - arch/powerpc/math-emu/ + arch/powerpc/math-emu/ \ + arch/powerpc/net/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_KVM) += arch/powerpc/kvm/ diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 4f685a779f4c..98d9426d4b85 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -209,8 +209,10 @@ wm8776:codec@1a { compatible = "wlf,wm8776"; reg = <0x1a>; - /* MCLK source is a stand-alone oscillator */ - clock-frequency = <12288000>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ }; }; @@ -280,7 +282,8 @@ codec-handle = <&wm8776>; fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; - fsl,fifo-depth = <16>; + fsl,fifo-depth = <15>; + fsl,ssi-asynchronous; }; dma@c300 { diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 7f7e4a878602..22e719575c60 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -85,7 +85,7 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PCI is not set CONFIG_USB_STORAGE=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=m CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index 6472322bf13b..185c292b0f1c 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -141,7 +141,7 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_STORAGE=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PS3=m CONFIG_EXT2_FS=m CONFIG_EXT3_FS=m diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index c9f212b5f3de..80bc5de7ee1d 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -148,7 +148,6 @@ CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m CONFIG_BE2ISCSI=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h index fd3fd58bad84..7b589178be46 100644 --- a/arch/powerpc/include/asm/mmzone.h +++ b/arch/powerpc/include/asm/mmzone.h @@ -38,13 +38,6 @@ u64 memory_hotplug_max(void); #define memory_hotplug_max() memblock_end_of_DRAM() #endif -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) - #else #define memory_hotplug_max() memblock_end_of_DRAM() #endif /* CONFIG_NEED_MULTIPLE_NODES */ diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index e472659d906c..e980faae4225 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -71,6 +71,42 @@ #define PPC_INST_ERATSX 0x7c000126 #define PPC_INST_ERATSX_DOT 0x7c000127 +/* Misc instructions for BPF compiler */ +#define PPC_INST_LD 0xe8000000 +#define PPC_INST_LHZ 0xa0000000 +#define PPC_INST_LWZ 0x80000000 +#define PPC_INST_STD 0xf8000000 +#define PPC_INST_STDU 0xf8000001 +#define PPC_INST_MFLR 0x7c0802a6 +#define PPC_INST_MTLR 0x7c0803a6 +#define PPC_INST_CMPWI 0x2c000000 +#define PPC_INST_CMPDI 0x2c200000 +#define PPC_INST_CMPLW 0x7c000040 +#define PPC_INST_CMPLWI 0x28000000 +#define PPC_INST_ADDI 0x38000000 +#define PPC_INST_ADDIS 0x3c000000 +#define PPC_INST_ADD 0x7c000214 +#define PPC_INST_SUB 0x7c000050 +#define PPC_INST_BLR 0x4e800020 +#define PPC_INST_BLRL 0x4e800021 +#define PPC_INST_MULLW 0x7c0001d6 +#define PPC_INST_MULHWU 0x7c000016 +#define PPC_INST_MULLI 0x1c000000 +#define PPC_INST_DIVWU 0x7c0003d6 +#define PPC_INST_RLWINM 0x54000000 +#define PPC_INST_RLDICR 0x78000004 +#define PPC_INST_SLW 0x7c000030 +#define PPC_INST_SRW 0x7c000430 +#define PPC_INST_AND 0x7c000038 +#define PPC_INST_ANDDOT 0x7c000039 +#define PPC_INST_OR 0x7c000378 +#define PPC_INST_ANDI 0x70000000 +#define PPC_INST_ORI 0x60000000 +#define PPC_INST_ORIS 0x64000000 +#define PPC_INST_NEG 0x7c0000d0 +#define PPC_INST_BRANCH 0x48000000 +#define PPC_INST_BRANCH_COND 0x40800000 + /* macros to insert fields into opcodes */ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) @@ -83,6 +119,10 @@ #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) #define __PPC_WS(w) (((w) & 0x1f) << 11) +#define __PPC_SH(s) __PPC_WS(s) +#define __PPC_MB(s) (((s) & 0x1f) << 6) +#define __PPC_ME(s) (((s) & 0x1f) << 1) +#define __PPC_BI(s) (((s) & 0x1f) << 16) /* * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 77578c093dda..c57c19358a26 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/rtc.h> #include <linux/delay.h> +#include <linux/ratelimit.h> #include <asm/prom.h> #include <asm/rtas.h> #include <asm/time.h> @@ -29,9 +30,10 @@ unsigned long __init rtas_get_boot_time(void) } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); + if (error != 0) { + printk_ratelimited(KERN_WARNING + "error: reading the clock failed (%d)\n", + error); return 0; } @@ -55,19 +57,21 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) wait_time = rtas_busy_delay_time(error); if (wait_time) { - if (in_interrupt() && printk_ratelimit()) { + if (in_interrupt()) { memset(rtc_tm, 0, sizeof(struct rtc_time)); - printk(KERN_WARNING "error: reading clock" - " would delay interrupt\n"); + printk_ratelimited(KERN_WARNING + "error: reading clock " + "would delay interrupt\n"); return; /* delay not allowed */ } msleep(wait_time); } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); + if (error != 0) { + printk_ratelimited(KERN_WARNING + "error: reading the clock failed (%d)\n", + error); return; } @@ -99,9 +103,10 @@ int rtas_set_rtc_time(struct rtc_time *tm) } } while (wait_time && (get_tb() < max_wait_tb)); - if (error != 0 && printk_ratelimit()) - printk(KERN_WARNING "error: setting the clock failed (%d)\n", - error); + if (error != 0) + printk_ratelimited(KERN_WARNING + "error: setting the clock failed (%d)\n", + error); return 0; } diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index b96a3a010c26..78b76dc54dfb 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -25,6 +25,7 @@ #include <linux/errno.h> #include <linux/elf.h> #include <linux/ptrace.h> +#include <linux/ratelimit.h> #ifdef CONFIG_PPC64 #include <linux/syscalls.h> #include <linux/compat.h> @@ -892,11 +893,12 @@ badframe: printk("badframe in handle_rt_signal, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in handle_rt_signal32: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - addr, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in handle_rt_signal32: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + addr, regs->nip, regs->link); force_sigsegv(sig, current); return 0; @@ -1058,11 +1060,12 @@ long sys_rt_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, return 0; bad: - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in sys_rt_sigreturn: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - rt_sf, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in sys_rt_sigreturn: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + rt_sf, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; @@ -1149,12 +1152,12 @@ int sys_debug_setcontext(struct ucontext __user *ctx, * We kill the task with a SIGSEGV in this situation. */ if (do_setcontext(ctx, regs, 1)) { - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in " - "sys_debug_setcontext: %p nip %08lx " - "lr %08lx\n", - current->comm, current->pid, - ctx, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO "%s[%d]: bad frame in " + "sys_debug_setcontext: %p nip %08lx " + "lr %08lx\n", + current->comm, current->pid, + ctx, regs->nip, regs->link); force_sig(SIGSEGV, current); goto out; @@ -1236,11 +1239,12 @@ badframe: printk("badframe in handle_signal, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in handle_signal32: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - frame, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in handle_signal32: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + frame, regs->nip, regs->link); force_sigsegv(sig, current); return 0; @@ -1288,11 +1292,12 @@ long sys_sigreturn(int r3, int r4, int r5, int r6, int r7, int r8, return 0; badframe: - if (show_unhandled_signals && printk_ratelimit()) - printk(KERN_INFO "%s[%d]: bad frame in sys_sigreturn: " - "%p nip %08lx lr %08lx\n", - current->comm, current->pid, - addr, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(KERN_INFO + "%s[%d]: bad frame in sys_sigreturn: " + "%p nip %08lx lr %08lx\n", + current->comm, current->pid, + addr, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index da989fff19cc..e91c736cc842 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -24,6 +24,7 @@ #include <linux/elf.h> #include <linux/ptrace.h> #include <linux/module.h> +#include <linux/ratelimit.h> #include <asm/sigcontext.h> #include <asm/ucontext.h> @@ -380,10 +381,10 @@ badframe: printk("badframe in sys_rt_sigreturn, regs=%p uc=%p &uc->uc_mcontext=%p\n", regs, uc, &uc->uc_mcontext); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, "rt_sigreturn", - (long)uc, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "rt_sigreturn", + (long)uc, regs->nip, regs->link); force_sig(SIGSEGV, current); return 0; @@ -468,10 +469,10 @@ badframe: printk("badframe in setup_rt_frame, regs=%p frame=%p newsp=%lx\n", regs, frame, newsp); #endif - if (show_unhandled_signals && printk_ratelimit()) - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, "setup_rt_frame", - (long)frame, regs->nip, regs->link); + if (show_unhandled_signals) + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, "setup_rt_frame", + (long)frame, regs->nip, regs->link); force_sigsegv(signr, current); return 0; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 0ff4ab98d50c..1a0141426cda 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -34,6 +34,7 @@ #include <linux/bug.h> #include <linux/kdebug.h> #include <linux/debugfs.h> +#include <linux/ratelimit.h> #include <asm/emulated_ops.h> #include <asm/pgtable.h> @@ -197,12 +198,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) if (die("Exception in kernel mode", regs, signr)) return; } else if (show_unhandled_signals && - unhandled_signal(current, signr) && - printk_ratelimit()) { - printk(regs->msr & MSR_64BIT ? fmt64 : fmt32, - current->comm, current->pid, signr, - addr, regs->nip, regs->link, code); - } + unhandled_signal(current, signr)) { + printk_ratelimited(regs->msr & MSR_64BIT ? fmt64 : fmt32, + current->comm, current->pid, signr, + addr, regs->nip, regs->link, code); + } memset(&info, 0, sizeof(info)); info.si_signo = signr; @@ -425,7 +425,7 @@ int machine_check_e500mc(struct pt_regs *regs) unsigned long reason = mcsr; int recoverable = 1; - if (reason & MCSR_BUS_RBERR) { + if (reason & MCSR_LD) { recoverable = fsl_rio_mcheck_exception(regs); if (recoverable == 1) goto silent_out; @@ -1342,9 +1342,8 @@ void altivec_assist_exception(struct pt_regs *regs) } else { /* didn't recognize the instruction */ /* XXX quick hack for now: set the non-Java bit in the VSCR */ - if (printk_ratelimit()) - printk(KERN_ERR "Unrecognized altivec instruction " - "in %s at %lx\n", current->comm, regs->nip); + printk_ratelimited(KERN_ERR "Unrecognized altivec instruction " + "in %s at %lx\n", current->comm, regs->nip); current->thread.vscr.u[3] |= 0x10000; } } @@ -1548,9 +1547,8 @@ u32 ppc_warn_emulated; void ppc_warn_emulated_print(const char *type) { - if (printk_ratelimit()) - pr_warning("%s used emulated %s instruction\n", current->comm, - type); + pr_warn_ratelimited("%s used emulated %s instruction\n", current->comm, + type); } static int __init ppc_warn_emulated_init(void) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 54f4fb994e99..ad35f66c69e8 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -31,6 +31,7 @@ #include <linux/kdebug.h> #include <linux/perf_event.h> #include <linux/magic.h> +#include <linux/ratelimit.h> #include <asm/firmware.h> #include <asm/page.h> @@ -346,11 +347,10 @@ bad_area_nosemaphore: return 0; } - if (is_exec && (error_code & DSISR_PROTFAULT) - && printk_ratelimit()) - printk(KERN_CRIT "kernel tried to execute NX-protected" - " page (%lx) - exploit attempt? (uid: %d)\n", - address, current_uid()); + if (is_exec && (error_code & DSISR_PROTFAULT)) + printk_ratelimited(KERN_CRIT "kernel tried to execute NX-protected" + " page (%lx) - exploit attempt? (uid: %d)\n", + address, current_uid()); return SIGSEGV; diff --git a/arch/powerpc/net/Makefile b/arch/powerpc/net/Makefile new file mode 100644 index 000000000000..266b3950c3ac --- /dev/null +++ b/arch/powerpc/net/Makefile @@ -0,0 +1,4 @@ +# +# Arch-specific network modules +# +obj-$(CONFIG_BPF_JIT) += bpf_jit_64.o bpf_jit_comp.o diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h new file mode 100644 index 000000000000..af1ab5e9a691 --- /dev/null +++ b/arch/powerpc/net/bpf_jit.h @@ -0,0 +1,227 @@ +/* bpf_jit.h: BPF JIT compiler for PPC64 + * + * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#ifndef _BPF_JIT_H +#define _BPF_JIT_H + +#define BPF_PPC_STACK_LOCALS 32 +#define BPF_PPC_STACK_BASIC (48+64) +#define BPF_PPC_STACK_SAVE (18*8) +#define BPF_PPC_STACKFRAME (BPF_PPC_STACK_BASIC+BPF_PPC_STACK_LOCALS+ \ + BPF_PPC_STACK_SAVE) +#define BPF_PPC_SLOWPATH_FRAME (48+64) + +/* + * Generated code register usage: + * + * As normal PPC C ABI (e.g. r1=sp, r2=TOC), with: + * + * skb r3 (Entry parameter) + * A register r4 + * X register r5 + * addr param r6 + * r7-r10 scratch + * skb->data r14 + * skb headlen r15 (skb->len - skb->data_len) + * m[0] r16 + * m[...] ... + * m[15] r31 + */ +#define r_skb 3 +#define r_ret 3 +#define r_A 4 +#define r_X 5 +#define r_addr 6 +#define r_scratch1 7 +#define r_D 14 +#define r_HL 15 +#define r_M 16 + +#ifndef __ASSEMBLY__ + +/* + * Assembly helpers from arch/powerpc/net/bpf_jit.S: + */ +extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[]; + +#define FUNCTION_DESCR_SIZE 24 + +/* + * 16-bit immediate helper macros: HA() is for use with sign-extending instrs + * (e.g. LD, ADDI). If the bottom 16 bits is "-ve", add another bit into the + * top half to negate the effect (i.e. 0xffff + 1 = 0x(1)0000). + */ +#define IMM_H(i) ((uintptr_t)(i)>>16) +#define IMM_HA(i) (((uintptr_t)(i)>>16) + \ + (((uintptr_t)(i) & 0x8000) >> 15)) +#define IMM_L(i) ((uintptr_t)(i) & 0xffff) + +#define PLANT_INSTR(d, idx, instr) \ + do { if (d) { (d)[idx] = instr; } idx++; } while (0) +#define EMIT(instr) PLANT_INSTR(image, ctx->idx, instr) + +#define PPC_NOP() EMIT(PPC_INST_NOP) +#define PPC_BLR() EMIT(PPC_INST_BLR) +#define PPC_BLRL() EMIT(PPC_INST_BLRL) +#define PPC_MTLR(r) EMIT(PPC_INST_MTLR | __PPC_RT(r)) +#define PPC_ADDI(d, a, i) EMIT(PPC_INST_ADDI | __PPC_RT(d) | \ + __PPC_RA(a) | IMM_L(i)) +#define PPC_MR(d, a) PPC_OR(d, a, a) +#define PPC_LI(r, i) PPC_ADDI(r, 0, i) +#define PPC_ADDIS(d, a, i) EMIT(PPC_INST_ADDIS | \ + __PPC_RS(d) | __PPC_RA(a) | IMM_L(i)) +#define PPC_LIS(r, i) PPC_ADDIS(r, 0, i) +#define PPC_STD(r, base, i) EMIT(PPC_INST_STD | __PPC_RS(r) | \ + __PPC_RA(base) | ((i) & 0xfffc)) + +#define PPC_LD(r, base, i) EMIT(PPC_INST_LD | __PPC_RT(r) | \ + __PPC_RA(base) | IMM_L(i)) +#define PPC_LWZ(r, base, i) EMIT(PPC_INST_LWZ | __PPC_RT(r) | \ + __PPC_RA(base) | IMM_L(i)) +#define PPC_LHZ(r, base, i) EMIT(PPC_INST_LHZ | __PPC_RT(r) | \ + __PPC_RA(base) | IMM_L(i)) +/* Convenience helpers for the above with 'far' offsets: */ +#define PPC_LD_OFFS(r, base, i) do { if ((i) < 32768) PPC_LD(r, base, i); \ + else { PPC_ADDIS(r, base, IMM_HA(i)); \ + PPC_LD(r, r, IMM_L(i)); } } while(0) + +#define PPC_LWZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LWZ(r, base, i); \ + else { PPC_ADDIS(r, base, IMM_HA(i)); \ + PPC_LWZ(r, r, IMM_L(i)); } } while(0) + +#define PPC_LHZ_OFFS(r, base, i) do { if ((i) < 32768) PPC_LHZ(r, base, i); \ + else { PPC_ADDIS(r, base, IMM_HA(i)); \ + PPC_LHZ(r, r, IMM_L(i)); } } while(0) + +#define PPC_CMPWI(a, i) EMIT(PPC_INST_CMPWI | __PPC_RA(a) | IMM_L(i)) +#define PPC_CMPDI(a, i) EMIT(PPC_INST_CMPDI | __PPC_RA(a) | IMM_L(i)) +#define PPC_CMPLWI(a, i) EMIT(PPC_INST_CMPLWI | __PPC_RA(a) | IMM_L(i)) +#define PPC_CMPLW(a, b) EMIT(PPC_INST_CMPLW | __PPC_RA(a) | __PPC_RB(b)) + +#define PPC_SUB(d, a, b) EMIT(PPC_INST_SUB | __PPC_RT(d) | \ + __PPC_RB(a) | __PPC_RA(b)) +#define PPC_ADD(d, a, b) EMIT(PPC_INST_ADD | __PPC_RT(d) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_MUL(d, a, b) EMIT(PPC_INST_MULLW | __PPC_RT(d) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_MULHWU(d, a, b) EMIT(PPC_INST_MULHWU | __PPC_RT(d) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_MULI(d, a, i) EMIT(PPC_INST_MULLI | __PPC_RT(d) | \ + __PPC_RA(a) | IMM_L(i)) +#define PPC_DIVWU(d, a, b) EMIT(PPC_INST_DIVWU | __PPC_RT(d) | \ + __PPC_RA(a) | __PPC_RB(b)) +#define PPC_AND(d, a, b) EMIT(PPC_INST_AND | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_RB(b)) +#define PPC_ANDI(d, a, i) EMIT(PPC_INST_ANDI | __PPC_RA(d) | \ + __PPC_RS(a) | IMM_L(i)) +#define PPC_AND_DOT(d, a, b) EMIT(PPC_INST_ANDDOT | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_RB(b)) +#define PPC_OR(d, a, b) EMIT(PPC_INST_OR | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_RB(b)) +#define PPC_ORI(d, a, i) EMIT(PPC_INST_ORI | __PPC_RA(d) | \ + __PPC_RS(a) | IMM_L(i)) +#define PPC_ORIS(d, a, i) EMIT(PPC_INST_ORIS | __PPC_RA(d) | \ + __PPC_RS(a) | IMM_L(i)) +#define PPC_SLW(d, a, s) EMIT(PPC_INST_SLW | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_RB(s)) +#define PPC_SRW(d, a, s) EMIT(PPC_INST_SRW | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_RB(s)) +/* slwi = rlwinm Rx, Ry, n, 0, 31-n */ +#define PPC_SLWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_SH(i) | \ + __PPC_MB(0) | __PPC_ME(31-(i))) +/* srwi = rlwinm Rx, Ry, 32-n, n, 31 */ +#define PPC_SRWI(d, a, i) EMIT(PPC_INST_RLWINM | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_SH(32-(i)) | \ + __PPC_MB(i) | __PPC_ME(31)) +/* sldi = rldicr Rx, Ry, n, 63-n */ +#define PPC_SLDI(d, a, i) EMIT(PPC_INST_RLDICR | __PPC_RA(d) | \ + __PPC_RS(a) | __PPC_SH(i) | \ + __PPC_MB(63-(i)) | (((i) & 0x20) >> 4)) +#define PPC_NEG(d, a) EMIT(PPC_INST_NEG | __PPC_RT(d) | __PPC_RA(a)) + +/* Long jump; (unconditional 'branch') */ +#define PPC_JMP(dest) EMIT(PPC_INST_BRANCH | \ + (((dest) - (ctx->idx * 4)) & 0x03fffffc)) +/* "cond" here covers BO:BI fields. */ +#define PPC_BCC_SHORT(cond, dest) EMIT(PPC_INST_BRANCH_COND | \ + (((cond) & 0x3ff) << 16) | \ + (((dest) - (ctx->idx * 4)) & \ + 0xfffc)) +#define PPC_LI32(d, i) do { PPC_LI(d, IMM_L(i)); \ + if ((u32)(uintptr_t)(i) >= 32768) { \ + PPC_ADDIS(d, d, IMM_HA(i)); \ + } } while(0) +#define PPC_LI64(d, i) do { \ + if (!((uintptr_t)(i) & 0xffffffff00000000ULL)) \ + PPC_LI32(d, i); \ + else { \ + PPC_LIS(d, ((uintptr_t)(i) >> 48)); \ + if ((uintptr_t)(i) & 0x0000ffff00000000ULL) \ + PPC_ORI(d, d, \ + ((uintptr_t)(i) >> 32) & 0xffff); \ + PPC_SLDI(d, d, 32); \ + if ((uintptr_t)(i) & 0x00000000ffff0000ULL) \ + PPC_ORIS(d, d, \ + ((uintptr_t)(i) >> 16) & 0xffff); \ + if ((uintptr_t)(i) & 0x000000000000ffffULL) \ + PPC_ORI(d, d, (uintptr_t)(i) & 0xffff); \ + } } while (0); + +static inline bool is_nearbranch(int offset) +{ + return (offset < 32768) && (offset >= -32768); +} + +/* + * The fly in the ointment of code size changing from pass to pass is + * avoided by padding the short branch case with a NOP. If code size differs + * with different branch reaches we will have the issue of code moving from + * one pass to the next and will need a few passes to converge on a stable + * state. + */ +#define PPC_BCC(cond, dest) do { \ + if (is_nearbranch((dest) - (ctx->idx * 4))) { \ + PPC_BCC_SHORT(cond, dest); \ + PPC_NOP(); \ + } else { \ + /* Flip the 'T or F' bit to invert comparison */ \ + PPC_BCC_SHORT(cond ^ COND_CMP_TRUE, (ctx->idx+2)*4); \ + PPC_JMP(dest); \ + } } while(0) + +/* To create a branch condition, select a bit of cr0... */ +#define CR0_LT 0 +#define CR0_GT 1 +#define CR0_EQ 2 +/* ...and modify BO[3] */ +#define COND_CMP_TRUE 0x100 +#define COND_CMP_FALSE 0x000 +/* Together, they make all required comparisons: */ +#define COND_GT (CR0_GT | COND_CMP_TRUE) +#define COND_GE (CR0_LT | COND_CMP_FALSE) +#define COND_EQ (CR0_EQ | COND_CMP_TRUE) +#define COND_NE (CR0_EQ | COND_CMP_FALSE) +#define COND_LT (CR0_LT | COND_CMP_TRUE) + +#define SEEN_DATAREF 0x10000 /* might call external helpers */ +#define SEEN_XREG 0x20000 /* X reg is used */ +#define SEEN_MEM 0x40000 /* SEEN_MEM+(1<<n) = use mem[n] for temporary + * storage */ +#define SEEN_MEM_MSK 0x0ffff + +struct codegen_context { + unsigned int seen; + unsigned int idx; + int pc_ret0; /* bpf index of first RET #0 instruction (if any) */ +}; + +#endif + +#endif diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S new file mode 100644 index 000000000000..ff4506e85cce --- /dev/null +++ b/arch/powerpc/net/bpf_jit_64.S @@ -0,0 +1,138 @@ +/* bpf_jit.S: Packet/header access helper functions + * for PPC64 BPF compiler. + * + * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <asm/ppc_asm.h> +#include "bpf_jit.h" + +/* + * All of these routines are called directly from generated code, + * whose register usage is: + * + * r3 skb + * r4,r5 A,X + * r6 *** address parameter to helper *** + * r7-r10 scratch + * r14 skb->data + * r15 skb headlen + * r16-31 M[] + */ + +/* + * To consider: These helpers are so small it could be better to just + * generate them inline. Inline code can do the simple headlen check + * then branch directly to slow_path_XXX if required. (In fact, could + * load a spare GPR with the address of slow_path_generic and pass size + * as an argument, making the call site a mtlr, li and bllr.) + * + * Technically, the "is addr < 0" check is unnecessary & slowing down + * the ABS path, as it's statically checked on generation. + */ + .globl sk_load_word +sk_load_word: + cmpdi r_addr, 0 + blt bpf_error + /* Are we accessing past headlen? */ + subi r_scratch1, r_HL, 4 + cmpd r_scratch1, r_addr + blt bpf_slow_path_word + /* Nope, just hitting the header. cr0 here is eq or gt! */ + lwzx r_A, r_D, r_addr + /* When big endian we don't need to byteswap. */ + blr /* Return success, cr0 != LT */ + + .globl sk_load_half +sk_load_half: + cmpdi r_addr, 0 + blt bpf_error + subi r_scratch1, r_HL, 2 + cmpd r_scratch1, r_addr + blt bpf_slow_path_half + lhzx r_A, r_D, r_addr + blr + + .globl sk_load_byte +sk_load_byte: + cmpdi r_addr, 0 + blt bpf_error + cmpd r_HL, r_addr + ble bpf_slow_path_byte + lbzx r_A, r_D, r_addr + blr + +/* + * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf) + * r_addr is the offset value, already known positive + */ + .globl sk_load_byte_msh +sk_load_byte_msh: + cmpd r_HL, r_addr + ble bpf_slow_path_byte_msh + lbzx r_X, r_D, r_addr + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr + +bpf_error: + /* Entered with cr0 = lt */ + li r3, 0 + /* Generated code will 'blt epilogue', returning 0. */ + blr + +/* Call out to skb_copy_bits: + * We'll need to back up our volatile regs first; we have + * local variable space at r1+(BPF_PPC_STACK_BASIC). + * Allocate a new stack frame here to remain ABI-compliant in + * stashing LR. + */ +#define bpf_slow_path_common(SIZE) \ + mflr r0; \ + std r0, 16(r1); \ + /* R3 goes in parameter space of caller's frame */ \ + std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + addi r5, r1, BPF_PPC_STACK_BASIC+(2*8); \ + stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \ + /* R3 = r_skb, as passed */ \ + mr r4, r_addr; \ + li r6, SIZE; \ + bl skb_copy_bits; \ + /* R3 = 0 on success */ \ + addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ + ld r0, 16(r1); \ + ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + mtlr r0; \ + cmpdi r3, 0; \ + blt bpf_error; /* cr0 = LT */ \ + ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + /* Great success! */ + +bpf_slow_path_word: + bpf_slow_path_common(4) + /* Data value is on stack, and cr0 != LT */ + lwz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1) + blr + +bpf_slow_path_half: + bpf_slow_path_common(2) + lhz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1) + blr + +bpf_slow_path_byte: + bpf_slow_path_common(1) + lbz r_A, BPF_PPC_STACK_BASIC+(2*8)(r1) + blr + +bpf_slow_path_byte_msh: + bpf_slow_path_common(1) + lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1) + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c new file mode 100644 index 000000000000..73619d3aeb6c --- /dev/null +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -0,0 +1,694 @@ +/* bpf_jit_comp.c: BPF JIT compiler for PPC64 + * + * Copyright 2011 Matt Evans <matt@ozlabs.org>, IBM Corporation + * + * Based on the x86 BPF compiler, by Eric Dumazet (eric.dumazet@gmail.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#include <linux/moduleloader.h> +#include <asm/cacheflush.h> +#include <linux/netdevice.h> +#include <linux/filter.h> +#include "bpf_jit.h" + +#ifndef __BIG_ENDIAN +/* There are endianness assumptions herein. */ +#error "Little-endian PPC not supported in BPF compiler" +#endif + +int bpf_jit_enable __read_mostly; + + +static inline void bpf_flush_icache(void *start, void *end) +{ + smp_wmb(); + flush_icache_range((unsigned long)start, (unsigned long)end); +} + +static void bpf_jit_build_prologue(struct sk_filter *fp, u32 *image, + struct codegen_context *ctx) +{ + int i; + const struct sock_filter *filter = fp->insns; + + if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) { + /* Make stackframe */ + if (ctx->seen & SEEN_DATAREF) { + /* If we call any helpers (for loads), save LR */ + EMIT(PPC_INST_MFLR | __PPC_RT(0)); + PPC_STD(0, 1, 16); + + /* Back up non-volatile regs. */ + PPC_STD(r_D, 1, -(8*(32-r_D))); + PPC_STD(r_HL, 1, -(8*(32-r_HL))); + } + if (ctx->seen & SEEN_MEM) { + /* + * Conditionally save regs r15-r31 as some will be used + * for M[] data. + */ + for (i = r_M; i < (r_M+16); i++) { + if (ctx->seen & (1 << (i-r_M))) + PPC_STD(i, 1, -(8*(32-i))); + } + } + EMIT(PPC_INST_STDU | __PPC_RS(1) | __PPC_RA(1) | + (-BPF_PPC_STACKFRAME & 0xfffc)); + } + + if (ctx->seen & SEEN_DATAREF) { + /* + * If this filter needs to access skb data, + * prepare r_D and r_HL: + * r_HL = skb->len - skb->data_len + * r_D = skb->data + */ + PPC_LWZ_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff, + data_len)); + PPC_LWZ_OFFS(r_HL, r_skb, offsetof(struct sk_buff, len)); + PPC_SUB(r_HL, r_HL, r_scratch1); + PPC_LD_OFFS(r_D, r_skb, offsetof(struct sk_buff, data)); + } + + if (ctx->seen & SEEN_XREG) { + /* + * TODO: Could also detect whether first instr. sets X and + * avoid this (as below, with A). + */ + PPC_LI(r_X, 0); + } + + switch (filter[0].code) { + case BPF_S_RET_K: + case BPF_S_LD_W_LEN: + case BPF_S_ANC_PROTOCOL: + case BPF_S_ANC_IFINDEX: + case BPF_S_ANC_MARK: + case BPF_S_ANC_RXHASH: + case BPF_S_ANC_CPU: + case BPF_S_ANC_QUEUE: + case BPF_S_LD_W_ABS: + case BPF_S_LD_H_ABS: + case BPF_S_LD_B_ABS: + /* first instruction sets A register (or is RET 'constant') */ + break; + default: + /* make sure we dont leak kernel information to user */ + PPC_LI(r_A, 0); + } +} + +static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) +{ + int i; + + if (ctx->seen & (SEEN_MEM | SEEN_DATAREF)) { + PPC_ADDI(1, 1, BPF_PPC_STACKFRAME); + if (ctx->seen & SEEN_DATAREF) { + PPC_LD(0, 1, 16); + PPC_MTLR(0); + PPC_LD(r_D, 1, -(8*(32-r_D))); + PPC_LD(r_HL, 1, -(8*(32-r_HL))); + } + if (ctx->seen & SEEN_MEM) { + /* Restore any saved non-vol registers */ + for (i = r_M; i < (r_M+16); i++) { + if (ctx->seen & (1 << (i-r_M))) + PPC_LD(i, 1, -(8*(32-i))); + } + } + } + /* The RETs have left a return value in R3. */ + + PPC_BLR(); +} + +/* Assemble the body code between the prologue & epilogue. */ +static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, + struct codegen_context *ctx, + unsigned int *addrs) +{ + const struct sock_filter *filter = fp->insns; + int flen = fp->len; + u8 *func; + unsigned int true_cond; + int i; + + /* Start of epilogue code */ + unsigned int exit_addr = addrs[flen]; + + for (i = 0; i < flen; i++) { + unsigned int K = filter[i].k; + + /* + * addrs[] maps a BPF bytecode address into a real offset from + * the start of the body code. + */ + addrs[i] = ctx->idx * 4; + + switch (filter[i].code) { + /*** ALU ops ***/ + case BPF_S_ALU_ADD_X: /* A += X; */ + ctx->seen |= SEEN_XREG; + PPC_ADD(r_A, r_A, r_X); + break; + case BPF_S_ALU_ADD_K: /* A += K; */ + if (!K) + break; + PPC_ADDI(r_A, r_A, IMM_L(K)); + if (K >= 32768) + PPC_ADDIS(r_A, r_A, IMM_HA(K)); + break; + case BPF_S_ALU_SUB_X: /* A -= X; */ + ctx->seen |= SEEN_XREG; + PPC_SUB(r_A, r_A, r_X); + break; + case BPF_S_ALU_SUB_K: /* A -= K */ + if (!K) + break; + PPC_ADDI(r_A, r_A, IMM_L(-K)); + if (K >= 32768) + PPC_ADDIS(r_A, r_A, IMM_HA(-K)); + break; + case BPF_S_ALU_MUL_X: /* A *= X; */ + ctx->seen |= SEEN_XREG; + PPC_MUL(r_A, r_A, r_X); + break; + case BPF_S_ALU_MUL_K: /* A *= K */ + if (K < 32768) + PPC_MULI(r_A, r_A, K); + else { + PPC_LI32(r_scratch1, K); + PPC_MUL(r_A, r_A, r_scratch1); + } + break; + case BPF_S_ALU_DIV_X: /* A /= X; */ + ctx->seen |= SEEN_XREG; + PPC_CMPWI(r_X, 0); + if (ctx->pc_ret0 != -1) { + PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]); + } else { + /* + * Exit, returning 0; first pass hits here + * (longer worst-case code size). + */ + PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12); + PPC_LI(r_ret, 0); + PPC_JMP(exit_addr); + } + PPC_DIVWU(r_A, r_A, r_X); + break; + case BPF_S_ALU_DIV_K: /* A = reciprocal_divide(A, K); */ + PPC_LI32(r_scratch1, K); + /* Top 32 bits of 64bit result -> A */ + PPC_MULHWU(r_A, r_A, r_scratch1); + break; + case BPF_S_ALU_AND_X: + ctx->seen |= SEEN_XREG; + PPC_AND(r_A, r_A, r_X); + break; + case BPF_S_ALU_AND_K: + if (!IMM_H(K)) + PPC_ANDI(r_A, r_A, K); + else { + PPC_LI32(r_scratch1, K); + PPC_AND(r_A, r_A, r_scratch1); + } + break; + case BPF_S_ALU_OR_X: + ctx->seen |= SEEN_XREG; + PPC_OR(r_A, r_A, r_X); + break; + case BPF_S_ALU_OR_K: + if (IMM_L(K)) + PPC_ORI(r_A, r_A, IMM_L(K)); + if (K >= 65536) + PPC_ORIS(r_A, r_A, IMM_H(K)); + break; + case BPF_S_ALU_LSH_X: /* A <<= X; */ + ctx->seen |= SEEN_XREG; + PPC_SLW(r_A, r_A, r_X); + break; + case BPF_S_ALU_LSH_K: + if (K == 0) + break; + else + PPC_SLWI(r_A, r_A, K); + break; + case BPF_S_ALU_RSH_X: /* A >>= X; */ + ctx->seen |= SEEN_XREG; + PPC_SRW(r_A, r_A, r_X); + break; + case BPF_S_ALU_RSH_K: /* A >>= K; */ + if (K == 0) + break; + else + PPC_SRWI(r_A, r_A, K); + break; + case BPF_S_ALU_NEG: + PPC_NEG(r_A, r_A); + break; + case BPF_S_RET_K: + PPC_LI32(r_ret, K); + if (!K) { + if (ctx->pc_ret0 == -1) + ctx->pc_ret0 = i; + } + /* + * If this isn't the very last instruction, branch to + * the epilogue if we've stuff to clean up. Otherwise, + * if there's nothing to tidy, just return. If we /are/ + * the last instruction, we're about to fall through to + * the epilogue to return. + */ + if (i != flen - 1) { + /* + * Note: 'seen' is properly valid only on pass + * #2. Both parts of this conditional are the + * same instruction size though, meaning the + * first pass will still correctly determine the + * code size/addresses. + */ + if (ctx->seen) + PPC_JMP(exit_addr); + else + PPC_BLR(); + } + break; + case BPF_S_RET_A: + PPC_MR(r_ret, r_A); + if (i != flen - 1) { + if (ctx->seen) + PPC_JMP(exit_addr); + else + PPC_BLR(); + } + break; + case BPF_S_MISC_TAX: /* X = A */ + PPC_MR(r_X, r_A); + break; + case BPF_S_MISC_TXA: /* A = X */ + ctx->seen |= SEEN_XREG; + PPC_MR(r_A, r_X); + break; + + /*** Constant loads/M[] access ***/ + case BPF_S_LD_IMM: /* A = K */ + PPC_LI32(r_A, K); + break; + case BPF_S_LDX_IMM: /* X = K */ + PPC_LI32(r_X, K); + break; + case BPF_S_LD_MEM: /* A = mem[K] */ + PPC_MR(r_A, r_M + (K & 0xf)); + ctx->seen |= SEEN_MEM | (1<<(K & 0xf)); + break; + case BPF_S_LDX_MEM: /* X = mem[K] */ + PPC_MR(r_X, r_M + (K & 0xf)); + ctx->seen |= SEEN_MEM | (1<<(K & 0xf)); + break; + case BPF_S_ST: /* mem[K] = A */ + PPC_MR(r_M + (K & 0xf), r_A); + ctx->seen |= SEEN_MEM | (1<<(K & 0xf)); + break; + case BPF_S_STX: /* mem[K] = X */ + PPC_MR(r_M + (K & 0xf), r_X); + ctx->seen |= SEEN_XREG | SEEN_MEM | (1<<(K & 0xf)); + break; + case BPF_S_LD_W_LEN: /* A = skb->len; */ + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4); + PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, len)); + break; + case BPF_S_LDX_W_LEN: /* X = skb->len; */ + PPC_LWZ_OFFS(r_X, r_skb, offsetof(struct sk_buff, len)); + break; + + /*** Ancillary info loads ***/ + + /* None of the BPF_S_ANC* codes appear to be passed by + * sk_chk_filter(). The interpreter and the x86 BPF + * compiler implement them so we do too -- they may be + * planted in future. + */ + case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol); */ + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, + protocol) != 2); + PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, + protocol)); + /* ntohs is a NOP with BE loads. */ + break; + case BPF_S_ANC_IFINDEX: + PPC_LD_OFFS(r_scratch1, r_skb, offsetof(struct sk_buff, + dev)); + PPC_CMPDI(r_scratch1, 0); + if (ctx->pc_ret0 != -1) { + PPC_BCC(COND_EQ, addrs[ctx->pc_ret0]); + } else { + /* Exit, returning 0; first pass hits here. */ + PPC_BCC_SHORT(COND_NE, (ctx->idx*4)+12); + PPC_LI(r_ret, 0); + PPC_JMP(exit_addr); + } + BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, + ifindex) != 4); + PPC_LWZ_OFFS(r_A, r_scratch1, + offsetof(struct net_device, ifindex)); + break; + case BPF_S_ANC_MARK: + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4); + PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, + mark)); + break; + case BPF_S_ANC_RXHASH: + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, rxhash) != 4); + PPC_LWZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, + rxhash)); + break; + case BPF_S_ANC_QUEUE: + BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, + queue_mapping) != 2); + PPC_LHZ_OFFS(r_A, r_skb, offsetof(struct sk_buff, + queue_mapping)); + break; + case BPF_S_ANC_CPU: +#ifdef CONFIG_SMP + /* + * PACA ptr is r13: + * raw_smp_processor_id() = local_paca->paca_index + */ + BUILD_BUG_ON(FIELD_SIZEOF(struct paca_struct, + paca_index) != 2); + PPC_LHZ_OFFS(r_A, 13, + offsetof(struct paca_struct, paca_index)); +#else + PPC_LI(r_A, 0); +#endif + break; + + /*** Absolute loads from packet header/data ***/ + case BPF_S_LD_W_ABS: + func = sk_load_word; + goto common_load; + case BPF_S_LD_H_ABS: + func = sk_load_half; + goto common_load; + case BPF_S_LD_B_ABS: + func = sk_load_byte; + common_load: + /* + * Load from [K]. Reference with the (negative) + * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported. + */ + ctx->seen |= SEEN_DATAREF; + if ((int)K < 0) + return -ENOTSUPP; + PPC_LI64(r_scratch1, func); + PPC_MTLR(r_scratch1); + PPC_LI32(r_addr, K); + PPC_BLRL(); + /* + * Helper returns 'lt' condition on error, and an + * appropriate return value in r3 + */ + PPC_BCC(COND_LT, exit_addr); + break; + + /*** Indirect loads from packet header/data ***/ + case BPF_S_LD_W_IND: + func = sk_load_word; + goto common_load_ind; + case BPF_S_LD_H_IND: + func = sk_load_half; + goto common_load_ind; + case BPF_S_LD_B_IND: + func = sk_load_byte; + common_load_ind: + /* + * Load from [X + K]. Negative offsets are tested for + * in the helper functions, and result in a 'ret 0'. + */ + ctx->seen |= SEEN_DATAREF | SEEN_XREG; + PPC_LI64(r_scratch1, func); + PPC_MTLR(r_scratch1); + PPC_ADDI(r_addr, r_X, IMM_L(K)); + if (K >= 32768) + PPC_ADDIS(r_addr, r_addr, IMM_HA(K)); + PPC_BLRL(); + /* If error, cr0.LT set */ + PPC_BCC(COND_LT, exit_addr); + break; + + case BPF_S_LDX_B_MSH: + /* + * x86 version drops packet (RET 0) when K<0, whereas + * interpreter does allow K<0 (__load_pointer, special + * ancillary data). common_load returns ENOTSUPP if K<0, + * so we fall back to interpreter & filter works. + */ + func = sk_load_byte_msh; + goto common_load; + break; + + /*** Jump and branches ***/ + case BPF_S_JMP_JA: + if (K != 0) + PPC_JMP(addrs[i + 1 + K]); + break; + + case BPF_S_JMP_JGT_K: + case BPF_S_JMP_JGT_X: + true_cond = COND_GT; + goto cond_branch; + case BPF_S_JMP_JGE_K: + case BPF_S_JMP_JGE_X: + true_cond = COND_GE; + goto cond_branch; + case BPF_S_JMP_JEQ_K: + case BPF_S_JMP_JEQ_X: + true_cond = COND_EQ; + goto cond_branch; + case BPF_S_JMP_JSET_K: + case BPF_S_JMP_JSET_X: + true_cond = COND_NE; + /* Fall through */ + cond_branch: + /* same targets, can avoid doing the test :) */ + if (filter[i].jt == filter[i].jf) { + if (filter[i].jt > 0) + PPC_JMP(addrs[i + 1 + filter[i].jt]); + break; + } + + switch (filter[i].code) { + case BPF_S_JMP_JGT_X: + case BPF_S_JMP_JGE_X: + case BPF_S_JMP_JEQ_X: + ctx->seen |= SEEN_XREG; + PPC_CMPLW(r_A, r_X); + break; + case BPF_S_JMP_JSET_X: + ctx->seen |= SEEN_XREG; + PPC_AND_DOT(r_scratch1, r_A, r_X); + break; + case BPF_S_JMP_JEQ_K: + case BPF_S_JMP_JGT_K: + case BPF_S_JMP_JGE_K: + if (K < 32768) + PPC_CMPLWI(r_A, K); + else { + PPC_LI32(r_scratch1, K); + PPC_CMPLW(r_A, r_scratch1); + } + break; + case BPF_S_JMP_JSET_K: + if (K < 32768) + /* PPC_ANDI is /only/ dot-form */ + PPC_ANDI(r_scratch1, r_A, K); + else { + PPC_LI32(r_scratch1, K); + PPC_AND_DOT(r_scratch1, r_A, + r_scratch1); + } + break; + } + /* Sometimes branches are constructed "backward", with + * the false path being the branch and true path being + * a fallthrough to the next instruction. + */ + if (filter[i].jt == 0) + /* Swap the sense of the branch */ + PPC_BCC(true_cond ^ COND_CMP_TRUE, + addrs[i + 1 + filter[i].jf]); + else { + PPC_BCC(true_cond, addrs[i + 1 + filter[i].jt]); + if (filter[i].jf != 0) + PPC_JMP(addrs[i + 1 + filter[i].jf]); + } + break; + default: + /* The filter contains something cruel & unusual. + * We don't handle it, but also there shouldn't be + * anything missing from our list. + */ + if (printk_ratelimit()) + pr_err("BPF filter opcode %04x (@%d) unsupported\n", + filter[i].code, i); + return -ENOTSUPP; + } + + } + /* Set end-of-body-code address for exit. */ + addrs[i] = ctx->idx * 4; + + return 0; +} + +void bpf_jit_compile(struct sk_filter *fp) +{ + unsigned int proglen; + unsigned int alloclen; + u32 *image = NULL; + u32 *code_base; + unsigned int *addrs; + struct codegen_context cgctx; + int pass; + int flen = fp->len; + + if (!bpf_jit_enable) + return; + + addrs = kzalloc((flen+1) * sizeof(*addrs), GFP_KERNEL); + if (addrs == NULL) + return; + + /* + * There are multiple assembly passes as the generated code will change + * size as it settles down, figuring out the max branch offsets/exit + * paths required. + * + * The range of standard conditional branches is +/- 32Kbytes. Since + * BPF_MAXINSNS = 4096, we can only jump from (worst case) start to + * finish with 8 bytes/instruction. Not feasible, so long jumps are + * used, distinct from short branches. + * + * Current: + * + * For now, both branch types assemble to 2 words (short branches padded + * with a NOP); this is less efficient, but assembly will always complete + * after exactly 3 passes: + * + * First pass: No code buffer; Program is "faux-generated" -- no code + * emitted but maximum size of output determined (and addrs[] filled + * in). Also, we note whether we use M[], whether we use skb data, etc. + * All generation choices assumed to be 'worst-case', e.g. branches all + * far (2 instructions), return path code reduction not available, etc. + * + * Second pass: Code buffer allocated with size determined previously. + * Prologue generated to support features we have seen used. Exit paths + * determined and addrs[] is filled in again, as code may be slightly + * smaller as a result. + * + * Third pass: Code generated 'for real', and branch destinations + * determined from now-accurate addrs[] map. + * + * Ideal: + * + * If we optimise this, near branches will be shorter. On the + * first assembly pass, we should err on the side of caution and + * generate the biggest code. On subsequent passes, branches will be + * generated short or long and code size will reduce. With smaller + * code, more branches may fall into the short category, and code will + * reduce more. + * + * Finally, if we see one pass generate code the same size as the + * previous pass we have converged and should now generate code for + * real. Allocating at the end will also save the memory that would + * otherwise be wasted by the (small) current code shrinkage. + * Preferably, we should do a small number of passes (e.g. 5) and if we + * haven't converged by then, get impatient and force code to generate + * as-is, even if the odd branch would be left long. The chances of a + * long jump are tiny with all but the most enormous of BPF filter + * inputs, so we should usually converge on the third pass. + */ + + cgctx.idx = 0; + cgctx.seen = 0; + cgctx.pc_ret0 = -1; + /* Scouting faux-generate pass 0 */ + if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) + /* We hit something illegal or unsupported. */ + goto out; + + /* + * Pretend to build prologue, given the features we've seen. This will + * update ctgtx.idx as it pretends to output instructions, then we can + * calculate total size from idx. + */ + bpf_jit_build_prologue(fp, 0, &cgctx); + bpf_jit_build_epilogue(0, &cgctx); + + proglen = cgctx.idx * 4; + alloclen = proglen + FUNCTION_DESCR_SIZE; + image = module_alloc(max_t(unsigned int, alloclen, + sizeof(struct work_struct))); + if (!image) + goto out; + + code_base = image + (FUNCTION_DESCR_SIZE/4); + + /* Code generation passes 1-2 */ + for (pass = 1; pass < 3; pass++) { + /* Now build the prologue, body code & epilogue for real. */ + cgctx.idx = 0; + bpf_jit_build_prologue(fp, code_base, &cgctx); + bpf_jit_build_body(fp, code_base, &cgctx, addrs); + bpf_jit_build_epilogue(code_base, &cgctx); + + if (bpf_jit_enable > 1) + pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass, + proglen - (cgctx.idx * 4), cgctx.seen); + } + + if (bpf_jit_enable > 1) + pr_info("flen=%d proglen=%u pass=%d image=%p\n", + flen, proglen, pass, image); + + if (image) { + if (bpf_jit_enable > 1) + print_hex_dump(KERN_ERR, "JIT code: ", + DUMP_PREFIX_ADDRESS, + 16, 1, code_base, + proglen, false); + + bpf_flush_icache(code_base, code_base + (proglen/4)); + /* Function descriptor nastiness: Address + TOC */ + ((u64 *)image)[0] = (u64)code_base; + ((u64 *)image)[1] = local_paca->kernel_toc; + fp->bpf_func = (void *)image; + } +out: + kfree(addrs); + return; +} + +static void jit_free_defer(struct work_struct *arg) +{ + module_free(NULL, arg); +} + +/* run from softirq, we must use a work_struct to call + * module_free() from process context + */ +void bpf_jit_free(struct sk_filter *fp) +{ + if (fp->bpf_func != sk_run_filter) { + struct work_struct *work = (struct work_struct *)fp->bpf_func; + + INIT_WORK(work, jit_free_defer); + schedule_work(work); + } +} diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 47ea1be1481b..90f4496017e4 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -55,14 +55,6 @@ config PPC_MPC5200_BUGFIX It is safe to say 'Y' here -config PPC_MPC5200_GPIO - bool "MPC5200 GPIO support" - depends on PPC_MPC52xx - select ARCH_REQUIRE_GPIOLIB - select GENERIC_GPIO - help - Enable gpiolib support for mpc5200 based boards - config PPC_MPC5200_LPBFIFO tristate "MPC5200 LocalPlus bus FIFO driver" depends on PPC_MPC52xx diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index 2bc8cd0c5cfc..4e62486791e9 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -14,5 +14,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) obj-$(CONFIG_PM) += lite5200_sleep.o lite5200_pm.o endif -obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c deleted file mode 100644 index 1757d1db4b51..000000000000 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ /dev/null @@ -1,380 +0,0 @@ -/* - * MPC52xx gpio driver - * - * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/of.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/of_gpio.h> -#include <linux/io.h> -#include <linux/of_platform.h> - -#include <asm/gpio.h> -#include <asm/mpc52xx.h> -#include <sysdev/fsl_soc.h> - -static DEFINE_SPINLOCK(gpio_lock); - -struct mpc52xx_gpiochip { - struct of_mm_gpio_chip mmchip; - unsigned int shadow_dvo; - unsigned int shadow_gpioe; - unsigned int shadow_ddr; -}; - -/* - * GPIO LIB API implementation for wakeup GPIOs. - * - * There's a maximum of 8 wakeup GPIOs. Which of these are available - * for use depends on your board setup. - * - * 0 -> GPIO_WKUP_7 - * 1 -> GPIO_WKUP_6 - * 2 -> PSC6_1 - * 3 -> PSC6_0 - * 4 -> ETH_17 - * 5 -> PSC3_9 - * 6 -> PSC2_4 - * 7 -> PSC1_4 - * - */ -static int mpc52xx_wkup_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - unsigned int ret; - - ret = (in_8(®s->wkup_ival) >> (7 - gpio)) & 1; - - pr_debug("%s: gpio: %d ret: %d\n", __func__, gpio, ret); - - return ret; -} - -static inline void -__mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - - if (val) - chip->shadow_dvo |= 1 << (7 - gpio); - else - chip->shadow_dvo &= ~(1 << (7 - gpio)); - - out_8(®s->wkup_dvo, chip->shadow_dvo); -} - -static void -mpc52xx_wkup_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_wkup_gpio_set(gc, gpio, val); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); -} - -static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* set the direction */ - chip->shadow_ddr &= ~(1 << (7 - gpio)); - out_8(®s->wkup_ddr, chip->shadow_ddr); - - /* and enable the pin */ - chip->shadow_gpioe |= 1 << (7 - gpio); - out_8(®s->wkup_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} - -static int -mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_wkup_gpio_set(gc, gpio, val); - - /* Then set direction */ - chip->shadow_ddr |= 1 << (7 - gpio); - out_8(®s->wkup_ddr, chip->shadow_ddr); - - /* Finally enable the pin */ - chip->shadow_gpioe |= 1 << (7 - gpio); - out_8(®s->wkup_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); - - return 0; -} - -static int __devinit mpc52xx_wkup_gpiochip_probe(struct platform_device *ofdev) -{ - struct mpc52xx_gpiochip *chip; - struct mpc52xx_gpio_wkup __iomem *regs; - struct gpio_chip *gc; - int ret; - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - gc = &chip->mmchip.gc; - - gc->ngpio = 8; - gc->direction_input = mpc52xx_wkup_gpio_dir_in; - gc->direction_output = mpc52xx_wkup_gpio_dir_out; - gc->get = mpc52xx_wkup_gpio_get; - gc->set = mpc52xx_wkup_gpio_set; - - ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); - if (ret) - return ret; - - regs = chip->mmchip.regs; - chip->shadow_gpioe = in_8(®s->wkup_gpioe); - chip->shadow_ddr = in_8(®s->wkup_ddr); - chip->shadow_dvo = in_8(®s->wkup_dvo); - - return 0; -} - -static int mpc52xx_gpiochip_remove(struct platform_device *ofdev) -{ - return -EBUSY; -} - -static const struct of_device_id mpc52xx_wkup_gpiochip_match[] = { - { - .compatible = "fsl,mpc5200-gpio-wkup", - }, - {} -}; - -static struct platform_driver mpc52xx_wkup_gpiochip_driver = { - .driver = { - .name = "gpio_wkup", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_wkup_gpiochip_match, - }, - .probe = mpc52xx_wkup_gpiochip_probe, - .remove = mpc52xx_gpiochip_remove, -}; - -/* - * GPIO LIB API implementation for simple GPIOs - * - * There's a maximum of 32 simple GPIOs. Which of these are available - * for use depends on your board setup. - * The numbering reflects the bit numbering in the port registers: - * - * 0..1 > reserved - * 2..3 > IRDA - * 4..7 > ETHR - * 8..11 > reserved - * 12..15 > USB - * 16..17 > reserved - * 18..23 > PSC3 - * 24..27 > PSC2 - * 28..31 > PSC1 - */ -static int mpc52xx_simple_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned int ret; - - ret = (in_be32(®s->simple_ival) >> (31 - gpio)) & 1; - - return ret; -} - -static inline void -__mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - - if (val) - chip->shadow_dvo |= 1 << (31 - gpio); - else - chip->shadow_dvo &= ~(1 << (31 - gpio)); - out_be32(®s->simple_dvo, chip->shadow_dvo); -} - -static void -mpc52xx_simple_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - __mpc52xx_simple_gpio_set(gc, gpio, val); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); -} - -static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* set the direction */ - chip->shadow_ddr &= ~(1 << (31 - gpio)); - out_be32(®s->simple_ddr, chip->shadow_ddr); - - /* and enable the pin */ - chip->shadow_gpioe |= 1 << (31 - gpio); - out_be32(®s->simple_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -} - -static int -mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpiochip *chip = container_of(mm_gc, - struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio __iomem *regs = mm_gc->regs; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - - /* First set initial value */ - __mpc52xx_simple_gpio_set(gc, gpio, val); - - /* Then set direction */ - chip->shadow_ddr |= 1 << (31 - gpio); - out_be32(®s->simple_ddr, chip->shadow_ddr); - - /* Finally enable the pin */ - chip->shadow_gpioe |= 1 << (31 - gpio); - out_be32(®s->simple_gpioe, chip->shadow_gpioe); - - spin_unlock_irqrestore(&gpio_lock, flags); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); - - return 0; -} - -static int __devinit mpc52xx_simple_gpiochip_probe(struct platform_device *ofdev) -{ - struct mpc52xx_gpiochip *chip; - struct gpio_chip *gc; - struct mpc52xx_gpio __iomem *regs; - int ret; - - chip = kzalloc(sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - gc = &chip->mmchip.gc; - - gc->ngpio = 32; - gc->direction_input = mpc52xx_simple_gpio_dir_in; - gc->direction_output = mpc52xx_simple_gpio_dir_out; - gc->get = mpc52xx_simple_gpio_get; - gc->set = mpc52xx_simple_gpio_set; - - ret = of_mm_gpiochip_add(ofdev->dev.of_node, &chip->mmchip); - if (ret) - return ret; - - regs = chip->mmchip.regs; - chip->shadow_gpioe = in_be32(®s->simple_gpioe); - chip->shadow_ddr = in_be32(®s->simple_ddr); - chip->shadow_dvo = in_be32(®s->simple_dvo); - - return 0; -} - -static const struct of_device_id mpc52xx_simple_gpiochip_match[] = { - { - .compatible = "fsl,mpc5200-gpio", - }, - {} -}; - -static struct platform_driver mpc52xx_simple_gpiochip_driver = { - .driver = { - .name = "gpio", - .owner = THIS_MODULE, - .of_match_table = mpc52xx_simple_gpiochip_match, - }, - .probe = mpc52xx_simple_gpiochip_probe, - .remove = mpc52xx_gpiochip_remove, -}; - -static int __init mpc52xx_gpio_init(void) -{ - if (platform_driver_register(&mpc52xx_wkup_gpiochip_driver)) - printk(KERN_ERR "Unable to register wakeup GPIO driver\n"); - - if (platform_driver_register(&mpc52xx_simple_gpiochip_driver)) - printk(KERN_ERR "Unable to register simple GPIO driver\n"); - - return 0; -} - - -/* Make sure we get initialised before anyone else tries to use us */ -subsys_initcall(mpc52xx_gpio_init); - -/* No exit call at the moment as we cannot unregister of gpio chips */ - -MODULE_DESCRIPTION("Freescale MPC52xx gpio driver"); -MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de"); -MODULE_LICENSE("GPL v2"); - diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 33867ec4a234..9d6a8effeda2 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -12,6 +12,8 @@ #include <linux/of.h> #include <linux/memblock.h> #include <linux/vmalloc.h> +#include <linux/memory.h> + #include <asm/firmware.h> #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> @@ -20,24 +22,25 @@ static unsigned long get_memblock_size(void) { struct device_node *np; - unsigned int memblock_size = 0; + unsigned int memblock_size = MIN_MEMORY_BLOCK_SIZE; + struct resource r; np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory"); if (np) { - const unsigned long *size; + const __be64 *size; size = of_get_property(np, "ibm,lmb-size", NULL); - memblock_size = size ? *size : 0; - + if (size) + memblock_size = be64_to_cpup(size); of_node_put(np); - } else { + } else if (machine_is(pseries)) { + /* This fallback really only applies to pseries */ unsigned int memzero_size = 0; - const unsigned int *regs; np = of_find_node_by_path("/memory@0"); if (np) { - regs = of_get_property(np, "reg", NULL); - memzero_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memzero_size = resource_size(&r); of_node_put(np); } @@ -50,16 +53,21 @@ static unsigned long get_memblock_size(void) sprintf(buf, "/memory@%x", memzero_size); np = of_find_node_by_path(buf); if (np) { - regs = of_get_property(np, "reg", NULL); - memblock_size = regs ? regs[3] : 0; + if (!of_address_to_resource(np, 0, &r)) + memblock_size = resource_size(&r); of_node_put(np); } } } - return memblock_size; } +/* WARNING: This is going to override the generic definition whenever + * pseries is built-in regardless of what platform is active at boot + * time. This is fine for now as this is the only "option" and it + * should work everywhere. If not, we'll have to turn this into a + * ppc_md. callback + */ unsigned long memory_block_size_bytes(void) { return get_memblock_size(); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 5b206a2fe17c..b3fd081d56f5 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -283,23 +283,24 @@ static void __iomem *rio_regs_win; #ifdef CONFIG_E500 int fsl_rio_mcheck_exception(struct pt_regs *regs) { - const struct exception_table_entry *entry = NULL; - unsigned long reason = mfspr(SPRN_MCSR); - - if (reason & MCSR_BUS_RBERR) { - reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); - if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { - /* Check if we are prepared to handle this fault */ - entry = search_exception_tables(regs->nip); - if (entry) { - pr_debug("RIO: %s - MC Exception handled\n", - __func__); - out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), - 0); - regs->msr |= MSR_RI; - regs->nip = entry->fixup; - return 1; - } + const struct exception_table_entry *entry; + unsigned long reason; + + if (!rio_regs_win) + return 0; + + reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); + if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { + /* Check if we are prepared to handle this fault */ + entry = search_exception_tables(regs->nip); + if (entry) { + pr_debug("RIO: %s - MC Exception handled\n", + __func__); + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), + 0); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; } } diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 3a8de5bb628a..58d7a534f877 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -29,6 +29,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/syscore_ops.h> +#include <linux/ratelimit.h> #include <asm/ptrace.h> #include <asm/signal.h> @@ -1648,9 +1649,8 @@ static unsigned int _mpic_get_one_irq(struct mpic *mpic, int reg) return NO_IRQ; } if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: Got protected source %d !\n", - mpic->name, (int)src); + printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); mpic_eoi(mpic); return NO_IRQ; } @@ -1688,9 +1688,8 @@ unsigned int mpic_get_coreint_irq(void) return NO_IRQ; } if (unlikely(mpic->protected && test_bit(src, mpic->protected))) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: Got protected source %d !\n", - mpic->name, (int)src); + printk_ratelimited(KERN_WARNING "%s: Got protected source %d !\n", + mpic->name, (int)src); return NO_IRQ; } diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 90d77bd078f5..c03fef7a9c22 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -579,6 +579,7 @@ config S390_GUEST def_bool y prompt "s390 guest support for KVM (EXPERIMENTAL)" depends on 64BIT && EXPERIMENTAL + select VIRTUALIZATION select VIRTIO select VIRTIO_RING select VIRTIO_CONSOLE diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 52420d2785b3..1d55c95f617c 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -262,7 +262,7 @@ void smp_ctl_set_bit(int cr, int bit) memset(&parms.orvals, 0, sizeof(parms.orvals)); memset(&parms.andvals, 0xff, sizeof(parms.andvals)); - parms.orvals[cr] = 1 << bit; + parms.orvals[cr] = 1UL << bit; on_each_cpu(smp_ctl_bit_callback, &parms, 1); } EXPORT_SYMBOL(smp_ctl_set_bit); @@ -276,7 +276,7 @@ void smp_ctl_clear_bit(int cr, int bit) memset(&parms.orvals, 0, sizeof(parms.orvals)); memset(&parms.andvals, 0xff, sizeof(parms.andvals)); - parms.andvals[cr] = ~(1L << bit); + parms.andvals[cr] = ~(1UL << bit); on_each_cpu(smp_ctl_bit_callback, &parms, 1); } EXPORT_SYMBOL(smp_ctl_clear_bit); diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 5995e9bc72d9..0e358c2cffeb 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -25,7 +25,7 @@ extern void s390_backtrace(struct pt_regs * const regs, unsigned int depth); #include "hwsampler.h" -#define DEFAULT_INTERVAL 4096 +#define DEFAULT_INTERVAL 4127518 #define DEFAULT_SDBT_BLOCKS 1 #define DEFAULT_SDB_BLOCKS 511 @@ -151,6 +151,12 @@ static int oprofile_hwsampler_init(struct oprofile_operations *ops) if (oprofile_max_interval == 0) return -ENODEV; + /* The initial value should be sane */ + if (oprofile_hw_interval < oprofile_min_interval) + oprofile_hw_interval = oprofile_min_interval; + if (oprofile_hw_interval > oprofile_max_interval) + oprofile_hw_interval = oprofile_max_interval; + if (oprofile_timer_init(ops)) return -ENODEV; diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f03338c2f088..bbdeb48bbf8e 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -348,6 +348,7 @@ config CPU_SUBTYPE_SH7720 select SYS_SUPPORTS_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7720 if you have a SH3-DSP SH7720 CPU. @@ -357,6 +358,7 @@ config CPU_SUBTYPE_SH7721 select CPU_HAS_DSP select SYS_SUPPORTS_CMT select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -440,6 +442,7 @@ config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -467,7 +470,9 @@ config CPU_SUBTYPE_SH7786 select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB select USB_ARCH_HAS_OHCI + select USB_OHCI_SH if USB_OHCI_HCD select USB_ARCH_HAS_EHCI + select USB_EHCI_SH if USB_EHCI_HCD config CPU_SUBTYPE_SHX3 bool "Support SH-X3 processor" diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 3a32741cc0ac..513cb1a2e6c8 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/spi/spi.h> @@ -232,6 +233,52 @@ static struct platform_device usb1_common_device = { .resource = usb1_common_resources, }; +/* + * USBHS + */ +static int usbhs_get_id(struct platform_device *pdev) +{ + return gpio_get_value(GPIO_PTB3); +} + +static struct renesas_usbhs_platform_info usbhs_info = { + .platform_callback = { + .get_id = usbhs_get_id, + }, + .driver_param = { + .buswait_bwait = 4, + .detection_delay = 5, + }, +}; + +static struct resource usbhs_resources[] = { + [0] = { + .start = 0xa4d90000, + .end = 0xa4d90124 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 66, + .end = 66, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs_device = { + .name = "renesas_usbhs", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usbhs_info, + }, + .num_resources = ARRAY_SIZE(usbhs_resources), + .resource = usbhs_resources, + .archdata = { + .hwblk_id = HWBLK_USB1, + }, +}; + /* LCDC */ const static struct fb_videomode ecovec_lcd_modes[] = { { @@ -897,6 +944,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &sh_eth_device, &usb0_host_device, &usb1_common_device, + &usbhs_device, &lcdc_device, &ceu0_device, &ceu1_device, diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 780e083e4d17..23bc849d9c64 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -27,8 +27,6 @@ IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ $(CONFIG_BOOT_LINK_OFFSET)]') endif -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - ifeq ($(CONFIG_MCOUNT),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) @@ -37,7 +35,25 @@ endif LDFLAGS_vmlinux := --oformat $(ld-bfd) -Ttext $(IMAGE_OFFSET) -e startup \ -T $(obj)/../../kernel/vmlinux.lds -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE +# +# Pull in the necessary libgcc bits from the in-kernel implementation. +# +lib1funcs-$(CONFIG_SUPERH32) := ashiftrt.S ashldi3.c ashrsi3.S ashlsi3.S \ + lshrsi3.S +lib1funcs-obj := \ + $(addsuffix .o, $(basename $(addprefix $(obj)/, $(lib1funcs-y)))) + +lib1funcs-dir := $(srctree)/arch/$(SRCARCH)/lib +ifeq ($(BITS),64) + lib1funcs-dir := $(addsuffix $(BITS), $(lib1funcs-dir)) +endif + +KBUILD_CFLAGS += -I$(lib1funcs-dir) + +$(addprefix $(obj)/,$(lib1funcs-y)): $(obj)/%: $(lib1funcs-dir)/% FORCE + $(call cmd,shipped) + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(lib1funcs-obj) FORCE $(call if_changed,ld) @: diff --git a/arch/sh/configs/sh7757lcr_defconfig b/arch/sh/configs/sh7757lcr_defconfig index 33ddb130a7c8..cfde98ddb29d 100644 --- a/arch/sh/configs/sh7757lcr_defconfig +++ b/arch/sh/configs/sh7757lcr_defconfig @@ -9,7 +9,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS_ALL=y CONFIG_SLAB=y @@ -39,8 +38,6 @@ CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -56,18 +53,19 @@ CONFIG_SH_ETH=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=3 CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_SPI=y CONFIG_SPI_SH=y # CONFIG_HWMON is not set -CONFIG_MFD_SH_MOBILE_SDHI=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_SH=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_SH=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHI=y diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 0f558914e760..e2cbd92d520b 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -227,7 +227,7 @@ CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_PL2303=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SH=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h index 4676bf57693a..f848dec9e483 100644 --- a/arch/sh/include/asm/cmpxchg-grb.h +++ b/arch/sh/include/asm/cmpxchg-grb.h @@ -15,8 +15,9 @@ static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) " mov.l %2, @%1 \n\t" /* store new value */ "1: mov r1, r15 \n\t" /* LOGOUT */ : "=&r" (retval), - "+r" (m) - : "r" (val) + "+r" (m), + "+r" (val) /* inhibit r15 overloading */ + : : "memory", "r0", "r1"); return retval; @@ -36,8 +37,9 @@ static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) " mov.b %2, @%1 \n\t" /* store new value */ "1: mov r1, r15 \n\t" /* LOGOUT */ : "=&r" (retval), - "+r" (m) - : "r" (val) + "+r" (m), + "+r" (val) /* inhibit r15 overloading */ + : : "memory" , "r0", "r1"); return retval; @@ -54,13 +56,14 @@ static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, " nop \n\t" " mov r15, r1 \n\t" /* r1 = saved sp */ " mov #-8, r15 \n\t" /* LOGIN */ - " mov.l @%1, %0 \n\t" /* load old value */ - " cmp/eq %0, %2 \n\t" + " mov.l @%3, %0 \n\t" /* load old value */ + " cmp/eq %0, %1 \n\t" " bf 1f \n\t" /* if not equal */ - " mov.l %3, @%1 \n\t" /* store new value */ + " mov.l %2, @%3 \n\t" /* store new value */ "1: mov r1, r15 \n\t" /* LOGOUT */ - : "=&r" (retval) - : "r" (m), "r" (old), "r" (new) + : "=&r" (retval), + "+r" (old), "+r" (new) /* old or new can be r15 */ + : "r" (m) : "memory" , "r0", "r1", "t"); return retval; diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h index 8887baff5eff..15a8496960e6 100644 --- a/arch/sh/include/asm/mmzone.h +++ b/arch/sh/include/asm/mmzone.h @@ -9,10 +9,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) - static inline int pfn_to_nid(unsigned long pfn) { int nid; diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h index 2a541ddb5a1b..e25c4c7d6b63 100644 --- a/arch/sh/include/asm/processor_64.h +++ b/arch/sh/include/asm/processor_64.h @@ -150,7 +150,6 @@ struct thread_struct { #define SR_USER (SR_MMU | SR_FD) #define start_thread(_regs, new_pc, new_sp) \ - set_fs(USER_DS); \ _regs->sr = SR_USER; /* User mode. */ \ _regs->pc = new_pc - 4; /* Compensate syscall exit */ \ _regs->pc |= 1; /* Set SHmedia ! */ \ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 3daef8ecbc63..cbc47e6bcab5 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -298,6 +298,14 @@ enum { SHDMA_SLAVE_SCIF4_RX, SHDMA_SLAVE_SCIF5_TX, SHDMA_SLAVE_SCIF5_RX, + SHDMA_SLAVE_USB0D0_TX, + SHDMA_SLAVE_USB0D0_RX, + SHDMA_SLAVE_USB0D1_TX, + SHDMA_SLAVE_USB0D1_RX, + SHDMA_SLAVE_USB1D0_TX, + SHDMA_SLAVE_USB1D0_RX, + SHDMA_SLAVE_USB1D1_TX, + SHDMA_SLAVE_USB1D1_RX, SHDMA_SLAVE_SDHI0_TX, SHDMA_SLAVE_SDHI0_RX, SHDMA_SLAVE_SDHI1_TX, diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c index 0333fe9e3881..134a397b1918 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7724.c @@ -93,6 +93,46 @@ static const struct sh_dmae_slave_config sh7724_dmae_slaves[] = { .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x36, }, { + .slave_id = SHDMA_SLAVE_USB0D0_TX, + .addr = 0xA4D80100, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0x73, + }, { + .slave_id = SHDMA_SLAVE_USB0D0_RX, + .addr = 0xA4D80100, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0x73, + }, { + .slave_id = SHDMA_SLAVE_USB0D1_TX, + .addr = 0xA4D80120, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0x77, + }, { + .slave_id = SHDMA_SLAVE_USB0D1_RX, + .addr = 0xA4D80120, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0x77, + }, { + .slave_id = SHDMA_SLAVE_USB1D0_TX, + .addr = 0xA4D90100, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xab, + }, { + .slave_id = SHDMA_SLAVE_USB1D0_RX, + .addr = 0xA4D90100, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xab, + }, { + .slave_id = SHDMA_SLAVE_USB1D1_TX, + .addr = 0xA4D90120, + .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xaf, + }, { + .slave_id = SHDMA_SLAVE_USB1D1_RX, + .addr = 0xA4D90120, + .chcr = DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT), + .mid_rid = 0xaf, + }, { .slave_id = SHDMA_SLAVE_SDHI0_TX, .addr = 0x04ce0030, .chcr = DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT), diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c index 423dabf542d3..e915deafac89 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c @@ -183,7 +183,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF2_RX, .addr = 0x1f4b0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -197,7 +197,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF3_RX, .addr = 0x1f4c0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -211,7 +211,7 @@ static const struct sh_dmae_slave_config sh7757_dmae1_slaves[] = { { .slave_id = SHDMA_SLAVE_SCIF4_RX, .addr = 0x1f4d0014, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -228,7 +228,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC0_RX, .addr = 0x1e500013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -242,7 +242,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC1_RX, .addr = 0x1e510013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -256,7 +256,7 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC2_RX, .addr = 0x1e520013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xa2, }, @@ -265,12 +265,12 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e530012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xab, + .mid_rid = 0xa9, }, { .slave_id = SHDMA_SLAVE_RIIC3_RX, .addr = 0x1e530013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0xaf, }, @@ -279,14 +279,14 @@ static const struct sh_dmae_slave_config sh7757_dmae2_slaves[] = { .addr = 0x1e540012, .chcr = SM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc1, + .mid_rid = 0xc5, }, { .slave_id = SHDMA_SLAVE_RIIC4_RX, .addr = 0x1e540013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), - .mid_rid = 0xc2, + .mid_rid = 0xc6, }, }; @@ -301,7 +301,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC5_RX, .addr = 0x1e550013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x22, }, @@ -315,7 +315,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC6_RX, .addr = 0x1e560013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x2a, }, @@ -329,7 +329,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC7_RX, .addr = 0x1e570013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x42, }, @@ -343,7 +343,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC8_RX, .addr = 0x1e580013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x46, }, @@ -357,7 +357,7 @@ static const struct sh_dmae_slave_config sh7757_dmae3_slaves[] = { { .slave_id = SHDMA_SLAVE_RIIC9_RX, .addr = 0x1e590013, - .chcr = SM_INC | 0x800 | 0x40000000 | + .chcr = DM_INC | 0x800 | 0x40000000 | TS_INDEX2VAL(XMIT_SZ_8BIT), .mid_rid = 0x52, }, @@ -659,6 +659,54 @@ static struct platform_device spi0_device = { .resource = spi0_resources, }; +static struct resource usb_ehci_resources[] = { + [0] = { + .start = 0xfe4f1000, + .end = 0xfe4f10ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ehci_device = { + .name = "sh_ehci", + .id = -1, + .dev = { + .dma_mask = &usb_ehci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ehci_resources), + .resource = usb_ehci_resources, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xfe4f1800, + .end = 0xfe4f18ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 57, + .end = 57, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + static struct platform_device *sh7757_devices[] __initdata = { &scif2_device, &scif3_device, @@ -670,6 +718,8 @@ static struct platform_device *sh7757_devices[] __initdata = { &dma2_device, &dma3_device, &spi0_device, + &usb_ehci_device, + &usb_ohci_device, }; static int __init sh7757_devices_setup(void) @@ -1039,13 +1089,13 @@ static DECLARE_INTC_DESC(intc_desc, "sh7757", vectors, groups, /* Support for external interrupt pins in IRQ mode */ static struct intc_vect vectors_irq0123[] __initdata = { - INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), - INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ0, 0x200), INTC_VECT(IRQ1, 0x240), + INTC_VECT(IRQ2, 0x280), INTC_VECT(IRQ3, 0x2c0), }; static struct intc_vect vectors_irq4567[] __initdata = { - INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), - INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), + INTC_VECT(IRQ4, 0x300), INTC_VECT(IRQ5, 0x340), + INTC_VECT(IRQ6, 0x380), INTC_VECT(IRQ7, 0x3c0), }; static struct intc_sense_reg sense_registers[] __initdata = { @@ -1079,14 +1129,14 @@ static struct intc_vect vectors_irl0123[] __initdata = { }; static struct intc_vect vectors_irl4567[] __initdata = { - INTC_VECT(IRL4_LLLL, 0xb00), INTC_VECT(IRL4_LLLH, 0xb20), - INTC_VECT(IRL4_LLHL, 0xb40), INTC_VECT(IRL4_LLHH, 0xb60), - INTC_VECT(IRL4_LHLL, 0xb80), INTC_VECT(IRL4_LHLH, 0xba0), - INTC_VECT(IRL4_LHHL, 0xbc0), INTC_VECT(IRL4_LHHH, 0xbe0), - INTC_VECT(IRL4_HLLL, 0xc00), INTC_VECT(IRL4_HLLH, 0xc20), - INTC_VECT(IRL4_HLHL, 0xc40), INTC_VECT(IRL4_HLHH, 0xc60), - INTC_VECT(IRL4_HHLL, 0xc80), INTC_VECT(IRL4_HHLH, 0xca0), - INTC_VECT(IRL4_HHHL, 0xcc0), + INTC_VECT(IRL4_LLLL, 0x200), INTC_VECT(IRL4_LLLH, 0x220), + INTC_VECT(IRL4_LLHL, 0x240), INTC_VECT(IRL4_LLHH, 0x260), + INTC_VECT(IRL4_LHLL, 0x280), INTC_VECT(IRL4_LHLH, 0x2a0), + INTC_VECT(IRL4_LHHL, 0x2c0), INTC_VECT(IRL4_LHHH, 0x2e0), + INTC_VECT(IRL4_HLLL, 0x300), INTC_VECT(IRL4_HLLH, 0x320), + INTC_VECT(IRL4_HLHL, 0x340), INTC_VECT(IRL4_HLHH, 0x360), + INTC_VECT(IRL4_HHLL, 0x380), INTC_VECT(IRL4_HHLH, 0x3a0), + INTC_VECT(IRL4_HHHL, 0x3c0), }; static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7757-irl0123", vectors_irl0123, diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 91971103b62b..a3ee91971129 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/ftrace.h> #include <linux/delay.h> +#include <linux/ratelimit.h> #include <asm/processor.h> #include <asm/machvec.h> #include <asm/uaccess.h> @@ -268,9 +269,8 @@ void migrate_irqs(void) unsigned int newcpu = cpumask_any_and(data->affinity, cpu_online_mask); if (newcpu >= nr_cpu_ids) { - if (printk_ratelimit()) - printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", - irq, cpu); + pr_info_ratelimited("IRQ%u no longer affine to CPU%u\n", + irq, cpu); cpumask_setall(data->affinity); newcpu = cpumask_any_and(data->affinity, diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index b473f0c06fbc..aaf6d59c2012 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -102,8 +102,6 @@ EXPORT_SYMBOL(kernel_thread); void start_thread(struct pt_regs *regs, unsigned long new_pc, unsigned long new_sp) { - set_fs(USER_DS); - regs->pr = 0; regs->sr = SR_FD; regs->pc = new_pc; diff --git a/arch/sh/mm/alignment.c b/arch/sh/mm/alignment.c index b2595b8548ee..620fa7ff9eec 100644 --- a/arch/sh/mm/alignment.c +++ b/arch/sh/mm/alignment.c @@ -13,6 +13,7 @@ #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <linux/uaccess.h> +#include <linux/ratelimit.h> #include <asm/alignment.h> #include <asm/processor.h> @@ -95,13 +96,13 @@ int set_unalign_ctl(struct task_struct *tsk, unsigned int val) void unaligned_fixups_notify(struct task_struct *tsk, insn_size_t insn, struct pt_regs *regs) { - if (user_mode(regs) && (se_usermode & UM_WARN) && printk_ratelimit()) - pr_notice("Fixing up unaligned userspace access " + if (user_mode(regs) && (se_usermode & UM_WARN)) + pr_notice_ratelimited("Fixing up unaligned userspace access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); - else if (se_kernmode_warn && printk_ratelimit()) - pr_notice("Fixing up unaligned kernel access " + else if (se_kernmode_warn) + pr_notice_ratelimited("Fixing up unaligned kernel access " "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", tsk->comm, task_pid_nr(tsk), (void *)instruction_pointer(regs), insn); diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index 52411462c409..115725198038 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -26,9 +26,9 @@ static int cache_seq_show(struct seq_file *file, void *iter) { unsigned int cache_type = (unsigned int)file->private; struct cache_info *cache; - unsigned int waysize, way, cache_size; - unsigned long ccr, base; - static unsigned long addrstart = 0; + unsigned int waysize, way; + unsigned long ccr; + unsigned long addrstart = 0; /* * Go uncached immediately so we don't skew the results any @@ -45,28 +45,13 @@ static int cache_seq_show(struct seq_file *file, void *iter) } if (cache_type == CACHE_TYPE_DCACHE) { - base = CACHE_OC_ADDRESS_ARRAY; + addrstart = CACHE_OC_ADDRESS_ARRAY; cache = ¤t_cpu_data.dcache; } else { - base = CACHE_IC_ADDRESS_ARRAY; + addrstart = CACHE_IC_ADDRESS_ARRAY; cache = ¤t_cpu_data.icache; } - /* - * Due to the amount of data written out (depending on the cache size), - * we may be iterated over multiple times. In this case, keep track of - * the entry position in addrstart, and rewind it when we've hit the - * end of the cache. - * - * Likewise, the same code is used for multiple caches, so care must - * be taken for bouncing addrstart back and forth so the appropriate - * cache is hit. - */ - cache_size = cache->ways * cache->sets * cache->linesz; - if (((addrstart & 0xff000000) != base) || - (addrstart & 0x00ffffff) > cache_size) - addrstart = base; - waysize = cache->sets; /* diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h index d4d0711de0f9..14848909e0de 100644 --- a/arch/sparc/include/asm/irqflags_32.h +++ b/arch/sparc/include/asm/irqflags_32.h @@ -18,7 +18,7 @@ extern void arch_local_irq_restore(unsigned long); extern unsigned long arch_local_irq_save(void); extern void arch_local_irq_enable(void); -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,17 +26,17 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { arch_local_irq_save(); } -static inline bool arch_irqs_disabled_flags(unsigned long flags) +static inline notrace bool arch_irqs_disabled_flags(unsigned long flags) { return (flags & PSR_PIL) != 0; } -static inline bool arch_irqs_disabled(void) +static inline notrace bool arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h index aab969c82c2b..23cd27f6beb4 100644 --- a/arch/sparc/include/asm/irqflags_64.h +++ b/arch/sparc/include/asm/irqflags_64.h @@ -14,7 +14,7 @@ #ifndef __ASSEMBLY__ -static inline unsigned long arch_local_save_flags(void) +static inline notrace unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -26,7 +26,7 @@ static inline unsigned long arch_local_save_flags(void) return flags; } -static inline void arch_local_irq_restore(unsigned long flags) +static inline notrace void arch_local_irq_restore(unsigned long flags) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -36,7 +36,7 @@ static inline void arch_local_irq_restore(unsigned long flags) ); } -static inline void arch_local_irq_disable(void) +static inline notrace void arch_local_irq_disable(void) { __asm__ __volatile__( "wrpr %0, %%pil" @@ -46,7 +46,7 @@ static inline void arch_local_irq_disable(void) ); } -static inline void arch_local_irq_enable(void) +static inline notrace void arch_local_irq_enable(void) { __asm__ __volatile__( "wrpr 0, %%pil" @@ -56,17 +56,17 @@ static inline void arch_local_irq_enable(void) ); } -static inline int arch_irqs_disabled_flags(unsigned long flags) +static inline notrace int arch_irqs_disabled_flags(unsigned long flags) { return (flags > 0); } -static inline int arch_irqs_disabled(void) +static inline notrace int arch_irqs_disabled(void) { return arch_irqs_disabled_flags(arch_local_save_flags()); } -static inline unsigned long arch_local_irq_save(void) +static inline notrace unsigned long arch_local_irq_save(void) { unsigned long flags, tmp; diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h index e8c648741ed4..99d9b9f577bf 100644 --- a/arch/sparc/include/asm/mmzone.h +++ b/arch/sparc/include/asm/mmzone.h @@ -8,8 +8,6 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_end_pfn) extern int numa_cpu_lookup_table[]; extern cpumask_t numa_cpumask_lookup_table[]; diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h index c7ad3fe2b252..b928b31424b1 100644 --- a/arch/sparc/include/asm/ptrace.h +++ b/arch/sparc/include/asm/ptrace.h @@ -205,6 +205,7 @@ do { current_thread_info()->syscall_noerror = 1; \ } while (0) #define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV)) #define instruction_pointer(regs) ((regs)->tpc) +#define instruction_pointer_set(regs, val) ((regs)->tpc = (val)) #define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP]) #define regs_return_value(regs) ((regs)->u_regs[UREG_I0]) #ifdef CONFIG_SMP diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index 9fe08a1ea6c6..f445e98463e6 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -293,7 +293,7 @@ maybe_smp4m_msg: WRITE_PAUSE wr %l4, PSR_ET, %psr WRITE_PAUSE - sll %o3, 28, %o2 ! shift for simpler checks below + srl %o3, 28, %o2 ! shift for simpler checks below maybe_smp4m_msg_check_single: andcc %o2, 0x1, %g0 beq,a maybe_smp4m_msg_check_mask diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c index c0e01297e64e..e485a6804998 100644 --- a/arch/sparc/mm/leon_mm.c +++ b/arch/sparc/mm/leon_mm.c @@ -226,7 +226,7 @@ void leon3_getCacheRegs(struct leon3_cacheregs *regs) * Leon2 and Leon3 differ in their way of telling cache information * */ -int leon_flush_needed(void) +int __init leon_flush_needed(void) { int flush_needed = -1; unsigned int ssize, sets; diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h index c6344c4f32ac..9d3dbce8f953 100644 --- a/arch/tile/include/asm/mmzone.h +++ b/arch/tile/include/asm/mmzone.h @@ -40,17 +40,6 @@ static inline int pfn_to_nid(unsigned long pfn) return highbits_to_node[__pfn_to_highbits(pfn)]; } -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - #define kern_addr_valid(kaddr) virt_addr_valid((void *)kaddr) static inline int pfn_valid(int pfn) diff --git a/arch/um/include/asm/percpu.h b/arch/um/include/asm/percpu.h new file mode 100644 index 000000000000..efe7508d8abd --- /dev/null +++ b/arch/um/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __UM_PERCPU_H +#define __UM_PERCPU_H + +#include <asm-generic/percpu.h> + +#endif /* __UM_PERCPU_H */ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index da349723d411..37357a599dca 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1170,7 +1170,7 @@ comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI" config AMD_NUMA def_bool y prompt "Old style AMD Opteron NUMA detection" - depends on NUMA && PCI + depends on X86_64 && NUMA && PCI ---help--- Enable AMD NUMA node topology detection. You should say Y here if you have a multi processor AMD system. This uses an old method to diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h index 2fefa501d3ba..af60d8a2e288 100644 --- a/arch/x86/include/asm/apb_timer.h +++ b/arch/x86/include/asm/apb_timer.h @@ -62,7 +62,7 @@ extern int sfi_mtimer_num; #else /* CONFIG_APB_TIMER */ static inline unsigned long apbt_quick_calibrate(void) {return 0; } -static inline void apbt_time_init(void) {return 0; } +static inline void apbt_time_init(void) { } #endif #endif /* ASM_X86_APBT_H */ diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h index b60f2924c413..879fd7d33877 100644 --- a/arch/x86/include/asm/lguest_hcall.h +++ b/arch/x86/include/asm/lguest_hcall.h @@ -61,6 +61,7 @@ hcall(unsigned long call, : "memory"); return call; } +/*:*/ /* Can't use our min() macro here: needs to be a constant */ #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32) diff --git a/arch/x86/include/asm/memblock.h b/arch/x86/include/asm/memblock.h index 19ae14ba6978..0cd3800f33b9 100644 --- a/arch/x86/include/asm/memblock.h +++ b/arch/x86/include/asm/memblock.h @@ -4,7 +4,6 @@ #define ARCH_DISCARD_MEMBLOCK u64 memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align); -void memblock_x86_to_bootmem(u64 start, u64 end); void memblock_x86_reserve_range(u64 start, u64 end, char *name); void memblock_x86_free_range(u64 start, u64 end); @@ -19,5 +18,6 @@ u64 memblock_x86_hole_size(u64 start, u64 end); u64 memblock_x86_find_in_range_node(int nid, u64 start, u64 end, u64 size, u64 align); u64 memblock_x86_free_memory_in_range(u64 addr, u64 limit); u64 memblock_x86_memory_in_range(u64 addr, u64 limit); +bool memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align); #endif diff --git a/arch/x86/include/asm/mmzone_32.h b/arch/x86/include/asm/mmzone_32.h index 5e83a416eca8..ffa037f28d39 100644 --- a/arch/x86/include/asm/mmzone_32.h +++ b/arch/x86/include/asm/mmzone_32.h @@ -48,17 +48,6 @@ static inline int pfn_to_nid(unsigned long pfn) #endif } -/* - * Following are macros that each numa implmentation must define. - */ - -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) \ -({ \ - pg_data_t *__pgdat = NODE_DATA(nid); \ - __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \ -}) - static inline int pfn_valid(int pfn) { int nid = pfn_to_nid(pfn); @@ -68,6 +57,8 @@ static inline int pfn_valid(int pfn) return 0; } +#define early_pfn_valid(pfn) pfn_valid((pfn)) + #endif /* CONFIG_DISCONTIGMEM */ #ifdef CONFIG_NEED_MULTIPLE_NODES diff --git a/arch/x86/include/asm/mmzone_64.h b/arch/x86/include/asm/mmzone_64.h index b3f88d7867c7..129d9aa3ceb3 100644 --- a/arch/x86/include/asm/mmzone_64.h +++ b/arch/x86/include/asm/mmzone_64.h @@ -13,8 +13,5 @@ extern struct pglist_data *node_data[]; #define NODE_DATA(nid) (node_data[nid]) -#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) -#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ - NODE_DATA(nid)->node_spanned_pages) #endif #endif /* _ASM_X86_MMZONE_64_H */ diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 31d84acc1512..a518c0a45044 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -22,6 +22,8 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) u64 product; #ifdef __i386__ u32 tmp1, tmp2; +#else + ulong tmp; #endif if (shift < 0) @@ -42,8 +44,11 @@ static inline u64 pvclock_scale_delta(u64 delta, u32 mul_frac, int shift) : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); #elif defined(__x86_64__) __asm__ ( - "mul %%rdx ; shrd $32,%%rdx,%%rax" - : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); + "mul %[mul_frac] ; shrd $32, %[hi], %[lo]" + : [lo]"=a"(product), + [hi]"=d"(tmp) + : "0"(delta), + [mul_frac]"rm"((u64)mul_frac)); #else #error implement me! #endif diff --git a/arch/x86/include/asm/xen/pci.h b/arch/x86/include/asm/xen/pci.h index 4fbda9a3f339..968d57dd54c9 100644 --- a/arch/x86/include/asm/xen/pci.h +++ b/arch/x86/include/asm/xen/pci.h @@ -14,13 +14,14 @@ static inline int pci_xen_hvm_init(void) } #endif #if defined(CONFIG_XEN_DOM0) -void __init xen_setup_pirqs(void); +int __init pci_xen_initial_domain(void); int xen_find_device_domain_owner(struct pci_dev *dev); int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain); int xen_unregister_device_domain_owner(struct pci_dev *dev); #else -static inline void __init xen_setup_pirqs(void) +static inline int __init pci_xen_initial_domain(void) { + return -1; } static inline int xen_find_device_domain_owner(struct pci_dev *dev) { diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index ead21b663117..b4fd836e4053 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -28,6 +28,8 @@ pmode_cr3: .long 0 /* Saved %cr3 */ pmode_cr4: .long 0 /* Saved %cr4 */ pmode_efer: .quad 0 /* Saved EFER */ pmode_gdt: .quad 0 +pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ +pmode_behavior: .long 0 /* Wakeup behavior flags */ realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 @@ -91,6 +93,18 @@ wakeup_code: /* Call the C code */ calll main + /* Restore MISC_ENABLE before entering protected mode, in case + BIOS decided to clear XD_DISABLE during S3. */ + movl pmode_behavior, %eax + btl $WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE, %eax + jnc 1f + + movl pmode_misc_en, %eax + movl pmode_misc_en + 4, %edx + movl $MSR_IA32_MISC_ENABLE, %ecx + wrmsr +1: + /* Do any other stuff... */ #ifndef CONFIG_64BIT diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index e1828c07e79c..97a29e1430e3 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -21,6 +21,9 @@ struct wakeup_header { u32 pmode_efer_low; /* Protected mode EFER */ u32 pmode_efer_high; u64 pmode_gdt; + u32 pmode_misc_en_low; /* Protected mode MISC_ENABLE */ + u32 pmode_misc_en_high; + u32 pmode_behavior; /* Wakeup routine behavior flags */ u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ @@ -39,4 +42,7 @@ extern struct wakeup_header wakeup_header; #define WAKEUP_HEADER_SIGNATURE 0x51ee1111 #define WAKEUP_END_SIGNATURE 0x65a22c82 +/* Wakeup behavior bits */ +#define WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE 0 + #endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 18a857ba7a25..103b6ab368d3 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -77,6 +77,12 @@ int acpi_suspend_lowlevel(void) header->pmode_cr0 = read_cr0(); header->pmode_cr4 = read_cr4_safe(); + header->pmode_behavior = 0; + if (!rdmsr_safe(MSR_IA32_MISC_ENABLE, + &header->pmode_misc_en_low, + &header->pmode_misc_en_high)) + header->pmode_behavior |= + (1 << WAKEUP_BEHAVIOR_RESTORE_MISC_ENABLE); header->realmode_flags = acpi_realmode_flags; header->real_magic = 0x12345678; diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index b511a011b7d0..adc66c3a1fef 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -632,14 +632,14 @@ late_initcall(uv_init_heartbeat); /* Direct Legacy VGA I/O traffic to designated IOH */ int uv_set_vga_state(struct pci_dev *pdev, bool decode, - unsigned int command_bits, bool change_bridge) + unsigned int command_bits, u32 flags) { int domain, bus, rc; - PR_DEVEL("devfn %x decode %d cmd %x chg_brdg %d\n", - pdev->devfn, decode, command_bits, change_bridge); + PR_DEVEL("devfn %x decode %d cmd %x flags %d\n", + pdev->devfn, decode, command_bits, flags); - if (!change_bridge) + if (!(flags & PCI_VGA_STATE_CHANGE_BRIDGE)) return 0; if ((command_bits & PCI_COMMAND_IO) == 0) diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c index c29d631af6fc..395a10e68067 100644 --- a/arch/x86/kernel/asm-offsets_32.c +++ b/arch/x86/kernel/asm-offsets_32.c @@ -63,7 +63,6 @@ void foo(void) BLANK(); OFFSET(LGUEST_DATA_irq_enabled, lguest_data, irq_enabled); OFFSET(LGUEST_DATA_irq_pending, lguest_data, irq_pending); - OFFSET(LGUEST_DATA_pgdir, lguest_data, pgdir); BLANK(); OFFSET(LGUEST_PAGES_host_gdt_desc, lguest_pages, state.host_gdt_desc); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 2e4928d45a2d..e1ba8cb24e4e 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -337,7 +337,7 @@ EXPORT_SYMBOL(boot_option_idle_override); * Powermanagement idle function, if any.. */ void (*pm_idle)(void); -#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE) +#ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(pm_idle); #endif @@ -399,7 +399,7 @@ void default_idle(void) cpu_relax(); } } -#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE) +#ifdef CONFIG_APM_MODULE EXPORT_SYMBOL(default_idle); #endif diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 0c016f727695..9242436e9937 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -294,6 +294,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "VersaLogic Menlow board"), }, }, + { /* Handle reboot issue on Acer Aspire one */ + .callback = set_bios_reboot, + .ident = "Acer Aspire One A110", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "AOA110"), + }, + }, { } }; @@ -411,6 +419,30 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"), }, }, + { /* Handle problems with rebooting on the Latitude E6320. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6320", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), + }, + }, + { /* Handle problems with rebooting on the Latitude E5420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5420"), + }, + }, + { /* Handle problems with rebooting on the Latitude E6420. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E6420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6420"), + }, + }, { } }; diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index 30ac65df7d4e..e07a2fc876b9 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -36,6 +36,7 @@ #include <asm/bootparam.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> +#include <asm/swiotlb.h> #include <asm/fixmap.h> #include <asm/proto.h> #include <asm/setup.h> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 6df88c7885c0..adc98675cda0 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3372,7 +3372,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, void *insn, int insn_len) int def_op_bytes, def_ad_bytes, goffset, simd_prefix; bool op_prefix = false; struct opcode opcode; - struct operand memop = { .type = OP_NONE }; + struct operand memop = { .type = OP_NONE }, *memopp = NULL; c->eip = ctxt->eip; c->fetch.start = c->eip; @@ -3547,9 +3547,6 @@ done_prefixes: if (memop.type == OP_MEM && c->ad_bytes != 8) memop.addr.mem.ea = (u32)memop.addr.mem.ea; - if (memop.type == OP_MEM && c->rip_relative) - memop.addr.mem.ea += c->eip; - /* * Decode and fetch the source operand: register, memory * or immediate. @@ -3571,6 +3568,7 @@ done_prefixes: c->op_bytes; srcmem_common: c->src = memop; + memopp = &c->src; break; case SrcImmU16: rc = decode_imm(ctxt, &c->src, 2, false); @@ -3667,6 +3665,7 @@ done_prefixes: case DstMem: case DstMem64: c->dst = memop; + memopp = &c->dst; if ((c->d & DstMask) == DstMem64) c->dst.bytes = 8; else @@ -3700,10 +3699,13 @@ done_prefixes: /* Special instructions do their own operand decoding. */ default: c->dst.type = OP_NONE; /* Disable writeback. */ - return 0; + break; } done: + if (memopp && memopp->type == OP_MEM && c->rip_relative) + memopp->addr.mem.ea += c->eip; + return (rc == X86EMUL_UNHANDLEABLE) ? EMULATION_FAILED : EMULATION_OK; } diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index bd14bb4c8594..aee38623b768 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -565,7 +565,7 @@ gfn_to_memslot_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t gfn, static bool mapping_level_dirty_bitmap(struct kvm_vcpu *vcpu, gfn_t large_gfn) { - return gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true); + return !gfn_to_memslot_dirty_bitmap(vcpu, large_gfn, true); } static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn) diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 6c4dc010c4cb..9d03ad4dd5ec 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -121,7 +121,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker, gva_t addr, u32 access) { pt_element_t pte; - pt_element_t __user *ptep_user; + pt_element_t __user *uninitialized_var(ptep_user); gfn_t table_gfn; unsigned index, pt_access, uninitialized_var(pte_access); gpa_t pte_gpa; diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 4c3fa0f67469..d48ec60ea421 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2047,7 +2047,8 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0, unsigned long cr0, struct kvm_vcpu *vcpu) { - vmx_decache_cr3(vcpu); + if (!test_bit(VCPU_EXREG_CR3, (ulong *)&vcpu->arch.regs_avail)) + vmx_decache_cr3(vcpu); if (!(cr0 & X86_CR0_PG)) { /* From paging/starting to nonpaging */ vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index db832fd65ecb..13ee258442ae 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -71,7 +71,8 @@ #include <asm/stackprotector.h> #include <asm/reboot.h> /* for struct machine_ops */ -/*G:010 Welcome to the Guest! +/*G:010 + * Welcome to the Guest! * * The Guest in our tale is a simple creature: identical to the Host but * behaving in simplified but equivalent ways. In particular, the Guest is the @@ -190,15 +191,23 @@ static void lazy_hcall4(unsigned long call, #endif /*G:036 - * When lazy mode is turned off reset the per-cpu lazy mode variable and then - * issue the do-nothing hypercall to flush any stored calls. -:*/ + * When lazy mode is turned off, we issue the do-nothing hypercall to + * flush any stored calls, and call the generic helper to reset the + * per-cpu lazy mode variable. + */ static void lguest_leave_lazy_mmu_mode(void) { hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0); paravirt_leave_lazy_mmu(); } +/* + * We also catch the end of context switch; we enter lazy mode for much of + * that too, so again we need to flush here. + * + * (Technically, this is lazy CPU mode, and normally we're in lazy MMU + * mode, but unlike Xen, lguest doesn't care about the difference). + */ static void lguest_end_context_switch(struct task_struct *next) { hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0); @@ -391,7 +400,7 @@ static void lguest_load_tr_desc(void) * giant ball of hair. Its entry in the current Intel manual runs to 28 pages. * * This instruction even it has its own Wikipedia entry. The Wikipedia entry - * has been translated into 5 languages. I am not making this up! + * has been translated into 6 languages. I am not making this up! * * We could get funky here and identify ourselves as "GenuineLguest", but * instead we just use the real "cpuid" instruction. Then I pretty much turned @@ -458,7 +467,7 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx, /* * PAE systems can mark pages as non-executable. Linux calls this the * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced - * Virus Protection). We just switch turn if off here, since we don't + * Virus Protection). We just switch it off here, since we don't * support it. */ case 0x80000001: @@ -520,17 +529,16 @@ static unsigned long lguest_read_cr2(void) /* See lguest_set_pte() below. */ static bool cr3_changed = false; +static unsigned long current_cr3; /* * cr3 is the current toplevel pagetable page: the principle is the same as - * cr0. Keep a local copy, and tell the Host when it changes. The only - * difference is that our local copy is in lguest_data because the Host needs - * to set it upon our initial hypercall. + * cr0. Keep a local copy, and tell the Host when it changes. */ static void lguest_write_cr3(unsigned long cr3) { - lguest_data.pgdir = cr3; lazy_hcall1(LHCALL_NEW_PGTABLE, cr3); + current_cr3 = cr3; /* These two page tables are simple, linear, and used during boot */ if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table)) @@ -539,7 +547,7 @@ static void lguest_write_cr3(unsigned long cr3) static unsigned long lguest_read_cr3(void) { - return lguest_data.pgdir; + return current_cr3; } /* cr4 is used to enable and disable PGE, but we don't care. */ @@ -641,7 +649,7 @@ static void lguest_write_cr4(unsigned long val) /* * The Guest calls this after it has set a second-level entry (pte), ie. to map - * a page into a process' address space. Wetell the Host the toplevel and + * a page into a process' address space. We tell the Host the toplevel and * address this corresponds to. The Guest uses one pagetable per process, so * we need to tell the Host which one we're changing (mm->pgd). */ @@ -758,7 +766,7 @@ static void lguest_pmd_clear(pmd_t *pmdp) static void lguest_flush_tlb_single(unsigned long addr) { /* Simply set it to zero: if it was not, it will fault back in. */ - lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0); + lazy_hcall3(LHCALL_SET_PTE, current_cr3, addr, 0); } /* @@ -1140,7 +1148,7 @@ static struct notifier_block paniced = { static __init char *lguest_memory_setup(void) { /* - *The Linux bootloader header contains an "e820" memory map: the + * The Linux bootloader header contains an "e820" memory map: the * Launcher populated the first entry with our memory limit. */ e820_add_region(boot_params.e820_map[0].addr, diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index 4f420c2f2d55..6ddfe4fc23c3 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -6,18 +6,22 @@ #include <asm/processor-flags.h> /*G:020 - * Our story starts with the kernel booting into startup_32 in - * arch/x86/kernel/head_32.S. It expects a boot header, which is created by - * the bootloader (the Launcher in our case). + + * Our story starts with the bzImage: booting starts at startup_32 in + * arch/x86/boot/compressed/head_32.S. This merely uncompresses the real + * kernel in place and then jumps into it: startup_32 in + * arch/x86/kernel/head_32.S. Both routines expects a boot header in the %esi + * register, which is created by the bootloader (the Launcher in our case). * * The startup_32 function does very little: it clears the uninitialized global * C variables which we expect to be zero (ie. BSS) and then copies the boot - * header and kernel command line somewhere safe. Finally it checks the - * 'hardware_subarch' field. This was introduced in 2.6.24 for lguest and Xen: - * if it's set to '1' (lguest's assigned number), then it calls us here. + * header and kernel command line somewhere safe, and populates some initial + * page tables. Finally it checks the 'hardware_subarch' field. This was + * introduced in 2.6.24 for lguest and Xen: if it's set to '1' (lguest's + * assigned number), then it calls us here. * * WARNING: be very careful here! We're running at addresses equal to physical - * addesses (around 0), not above PAGE_OFFSET as most code expectes + * addresses (around 0), not above PAGE_OFFSET as most code expects * (eg. 0xC0000000). Jumps are relative, so they're OK, but we can't touch any * data without remembering to subtract __PAGE_OFFSET! * @@ -27,13 +31,18 @@ .section .init.text, "ax", @progbits ENTRY(lguest_entry) /* - * We make the "initialization" hypercall now to tell the Host about - * us, and also find out where it put our page tables. + * We make the "initialization" hypercall now to tell the Host where + * our lguest_data struct is. */ movl $LHCALL_LGUEST_INIT, %eax movl $lguest_data - __PAGE_OFFSET, %ebx int $LGUEST_TRAP_ENTRY + /* Now turn our pagetables on; setup by arch/x86/kernel/head_32.S. */ + movl $LHCALL_NEW_PGTABLE, %eax + movl $(initial_page_table - __PAGE_OFFSET), %ebx + int $LGUEST_TRAP_ENTRY + /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp @@ -96,12 +105,8 @@ send_interrupts: */ pushl %eax movl $LHCALL_SEND_INTERRUPTS, %eax - /* - * This is a vmcall instruction (same thing that KVM uses). Older - * assembler versions might not know the "vmcall" instruction, so we - * create one manually here. - */ - .byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */ + /* This is the actual hypercall trap. */ + int $LGUEST_TRAP_ENTRY /* Put eax back the way we found it. */ popl %eax ret diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index d865c4aeec55..bbaaa005bf0e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -28,6 +28,7 @@ #include <linux/poison.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/memory.h> #include <linux/memory_hotplug.h> #include <linux/nmi.h> #include <linux/gfp.h> @@ -895,8 +896,6 @@ const char *arch_vma_name(struct vm_area_struct *vma) } #ifdef CONFIG_X86_UV -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) - unsigned long memory_block_size_bytes(void) { if (is_uv_system()) { diff --git a/arch/x86/mm/memblock.c b/arch/x86/mm/memblock.c index aa1169392b83..992da5ec5a64 100644 --- a/arch/x86/mm/memblock.c +++ b/arch/x86/mm/memblock.c @@ -8,7 +8,7 @@ #include <linux/range.h> /* Check for already reserved areas */ -static bool __init check_with_memblock_reserved_size(u64 *addrp, u64 *sizep, u64 align) +bool __init memblock_x86_check_reserved_size(u64 *addrp, u64 *sizep, u64 align) { struct memblock_region *r; u64 addr = *addrp, last; @@ -59,7 +59,7 @@ u64 __init memblock_x86_find_in_range_size(u64 start, u64 *sizep, u64 align) if (addr >= ei_last) continue; *sizep = ei_last - addr; - while (check_with_memblock_reserved_size(&addr, sizep, align)) + while (memblock_x86_check_reserved_size(&addr, sizep, align)) ; if (*sizep) diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index cf9750004a08..68894fdc034b 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -112,8 +112,10 @@ static void nmi_cpu_start(void *dummy) static int nmi_start(void) { get_online_cpus(); - on_each_cpu(nmi_cpu_start, NULL, 1); ctr_running = 1; + /* make ctr_running visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_start, NULL, 1); put_online_cpus(); return 0; } @@ -504,15 +506,18 @@ static int nmi_setup(void) nmi_enabled = 0; ctr_running = 0; - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); err = register_die_notifier(&profile_exceptions_nb); if (err) goto fail; get_online_cpus(); register_cpu_notifier(&oprofile_cpu_nb); - on_each_cpu(nmi_cpu_setup, NULL, 1); nmi_enabled = 1; + /* make nmi_enabled visible to the nmi handler: */ + smp_mb(); + on_each_cpu(nmi_cpu_setup, NULL, 1); put_online_cpus(); return 0; @@ -531,7 +536,8 @@ static void nmi_shutdown(void) nmi_enabled = 0; ctr_running = 0; put_online_cpus(); - barrier(); + /* make variables visible to the nmi handler: */ + smp_mb(); unregister_die_notifier(&profile_exceptions_nb); msrs = &get_cpu_var(cpu_msrs); model->shutdown(msrs); diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 0972315c3860..68c3c1395202 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -188,7 +188,7 @@ static bool resource_contains(struct resource *res, resource_size_t point) return false; } -static void coalesce_windows(struct pci_root_info *info, int type) +static void coalesce_windows(struct pci_root_info *info, unsigned long type) { int i, j; struct resource *res1, *res2; diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index 8214724ce54d..1017c7bee388 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -1,8 +1,13 @@ /* - * Xen PCI Frontend Stub - puts some "dummy" functions in to the Linux - * x86 PCI core to support the Xen PCI Frontend + * Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and + * initial domain support. We also handle the DSDT _PRT callbacks for GSI's + * used in HVM and initial domain mode (PV does not parse ACPI, so it has no + * concept of GSIs). Under PV we hook under the pnbbios API for IRQs and + * 0xcf8 PCI configuration read/write. * * Author: Ryan Wilson <hap9@epoch.ncsc.mil> + * Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> + * Stefano Stabellini <stefano.stabellini@eu.citrix.com> */ #include <linux/module.h> #include <linux/init.h> @@ -19,22 +24,53 @@ #include <xen/events.h> #include <asm/xen/pci.h> +static int xen_pcifront_enable_irq(struct pci_dev *dev) +{ + int rc; + int share = 1; + int pirq; + u8 gsi; + + rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi); + if (rc < 0) { + dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n", + rc); + return rc; + } + /* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/ + pirq = gsi; + + if (gsi < NR_IRQS_LEGACY) + share = 0; + + rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront"); + if (rc < 0) { + dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n", + gsi, pirq, rc); + return rc; + } + + dev->irq = rc; + dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq); + return 0; +} + #ifdef CONFIG_ACPI -static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, - int trigger, int polarity) +static int xen_register_pirq(u32 gsi, int gsi_override, int triggering, + bool set_pirq) { - int rc, irq; + int rc, pirq = -1, irq = -1; struct physdev_map_pirq map_irq; int shareable = 0; char *name; - if (!xen_hvm_domain()) - return -1; + if (set_pirq) + pirq = gsi; map_irq.domid = DOMID_SELF; map_irq.type = MAP_PIRQ_TYPE_GSI; map_irq.index = gsi; - map_irq.pirq = -1; + map_irq.pirq = pirq; rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); if (rc) { @@ -42,7 +78,7 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, return -1; } - if (trigger == ACPI_EDGE_SENSITIVE) { + if (triggering == ACPI_EDGE_SENSITIVE) { shareable = 0; name = "ioapic-edge"; } else { @@ -50,12 +86,63 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, name = "ioapic-level"; } + if (gsi_override >= 0) + gsi = gsi_override; + irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name); + if (irq < 0) + goto out; - printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq); + printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi); +out: + return irq; +} + +static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, + int trigger, int polarity) +{ + if (!xen_hvm_domain()) + return -1; + + return xen_register_pirq(gsi, -1 /* no GSI override */, trigger, + false /* no mapping of GSI to PIRQ */); +} + +#ifdef CONFIG_XEN_DOM0 +static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) +{ + int rc, irq; + struct physdev_setup_gsi setup_gsi; + + if (!xen_pv_domain()) + return -1; + + printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", + gsi, triggering, polarity); + + irq = xen_register_pirq(gsi, gsi_override, triggering, true); + + setup_gsi.gsi = gsi; + setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); + setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + + rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi); + if (rc == -EEXIST) + printk(KERN_INFO "Already setup the GSI :%d\n", gsi); + else if (rc) { + printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", + gsi, rc); + } return irq; } + +static int acpi_register_gsi_xen(struct device *dev, u32 gsi, + int trigger, int polarity) +{ + return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); +} +#endif #endif #if defined(CONFIG_PCI_MSI) @@ -65,6 +152,43 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, struct xen_pci_frontend_ops *xen_pci_frontend; EXPORT_SYMBOL_GPL(xen_pci_frontend); +static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int irq, ret, i; + struct msi_desc *msidesc; + int *v; + + v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL); + if (!v) + return -ENOMEM; + + if (type == PCI_CAP_ID_MSIX) + ret = xen_pci_frontend_enable_msix(dev, v, nvec); + else + ret = xen_pci_frontend_enable_msi(dev, v); + if (ret) + goto error; + i = 0; + list_for_each_entry(msidesc, &dev->msi_list, list) { + irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, + (type == PCI_CAP_ID_MSIX) ? + "pcifront-msi-x" : + "pcifront-msi", + DOMID_SELF); + if (irq < 0) + goto free; + i++; + } + kfree(v); + return 0; + +error: + dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); +free: + kfree(v); + return ret; +} + #define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \ MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0)) @@ -123,67 +247,6 @@ error: return -ENODEV; } -/* - * For MSI interrupts we have to use drivers/xen/event.s functions to - * allocate an irq_desc and setup the right */ - - -static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - int irq, ret, i; - struct msi_desc *msidesc; - int *v; - - v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL); - if (!v) - return -ENOMEM; - - if (type == PCI_CAP_ID_MSIX) - ret = xen_pci_frontend_enable_msix(dev, v, nvec); - else - ret = xen_pci_frontend_enable_msi(dev, v); - if (ret) - goto error; - i = 0; - list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, - (type == PCI_CAP_ID_MSIX) ? - "pcifront-msi-x" : - "pcifront-msi", - DOMID_SELF); - if (irq < 0) - goto free; - i++; - } - kfree(v); - return 0; - -error: - dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); -free: - kfree(v); - return ret; -} - -static void xen_teardown_msi_irqs(struct pci_dev *dev) -{ - struct msi_desc *msidesc; - - msidesc = list_entry(dev->msi_list.next, struct msi_desc, list); - if (msidesc->msi_attrib.is_msix) - xen_pci_frontend_disable_msix(dev); - else - xen_pci_frontend_disable_msi(dev); - - /* Free the IRQ's and the msidesc using the generic code. */ - default_teardown_msi_irqs(dev); -} - -static void xen_teardown_msi_irq(unsigned int irq) -{ - xen_destroy_irq(irq); -} - #ifdef CONFIG_XEN_DOM0 static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { @@ -242,45 +305,28 @@ out: return ret; } #endif -#endif -static int xen_pcifront_enable_irq(struct pci_dev *dev) +static void xen_teardown_msi_irqs(struct pci_dev *dev) { - int rc; - int share = 1; - int pirq; - u8 gsi; - - rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n", - rc); - return rc; - } - - rc = xen_allocate_pirq_gsi(gsi); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n", - gsi, rc); - return rc; - } - pirq = rc; + struct msi_desc *msidesc; - if (gsi < NR_IRQS_LEGACY) - share = 0; + msidesc = list_entry(dev->msi_list.next, struct msi_desc, list); + if (msidesc->msi_attrib.is_msix) + xen_pci_frontend_disable_msix(dev); + else + xen_pci_frontend_disable_msi(dev); - rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront"); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n", - gsi, pirq, rc); - return rc; - } + /* Free the IRQ's and the msidesc using the generic code. */ + default_teardown_msi_irqs(dev); +} - dev->irq = rc; - dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq); - return 0; +static void xen_teardown_msi_irq(unsigned int irq) +{ + xen_destroy_irq(irq); } +#endif + int __init pci_xen_init(void) { if (!xen_pv_domain() || xen_initial_domain()) @@ -327,82 +373,13 @@ int __init pci_xen_hvm_init(void) } #ifdef CONFIG_XEN_DOM0 -static int xen_register_pirq(u32 gsi, int triggering) -{ - int rc, pirq, irq = -1; - struct physdev_map_pirq map_irq; - int shareable = 0; - char *name; - - if (!xen_pv_domain()) - return -1; - - if (triggering == ACPI_EDGE_SENSITIVE) { - shareable = 0; - name = "ioapic-edge"; - } else { - shareable = 1; - name = "ioapic-level"; - } - - pirq = xen_allocate_pirq_gsi(gsi); - if (pirq < 0) - goto out; - - irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); - if (irq < 0) - goto out; - - printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d\n", pirq, irq); - - map_irq.domid = DOMID_SELF; - map_irq.type = MAP_PIRQ_TYPE_GSI; - map_irq.index = gsi; - map_irq.pirq = pirq; - - rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); - if (rc) { - printk(KERN_WARNING "xen map irq failed %d\n", rc); - return -1; - } - -out: - return irq; -} - -static int xen_register_gsi(u32 gsi, int triggering, int polarity) -{ - int rc, irq; - struct physdev_setup_gsi setup_gsi; - - if (!xen_pv_domain()) - return -1; - - printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", - gsi, triggering, polarity); - - irq = xen_register_pirq(gsi, triggering); - - setup_gsi.gsi = gsi; - setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); - setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - - rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi); - if (rc == -EEXIST) - printk(KERN_INFO "Already setup the GSI :%d\n", gsi); - else if (rc) { - printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", - gsi, rc); - } - - return irq; -} - static __init void xen_setup_acpi_sci(void) { int rc; int trigger, polarity; int gsi = acpi_sci_override_gsi; + int irq = -1; + int gsi_override = -1; if (!gsi) return; @@ -415,51 +392,43 @@ static __init void xen_setup_acpi_sci(void) } trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; - + printk(KERN_INFO "xen: sci override: global_irq=%d trigger=%d " "polarity=%d\n", gsi, trigger, polarity); - gsi = xen_register_gsi(gsi, trigger, polarity); + /* Before we bind the GSI to a Linux IRQ, check whether + * we need to override it with bus_irq (IRQ) value. Usually for + * IRQs below IRQ_LEGACY_IRQ this holds IRQ == GSI, as so: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) + * but there are oddballs where the IRQ != GSI: + * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) + * which ends up being: gsi_to_irq[9] == 20 + * (which is what acpi_gsi_to_irq ends up calling when starting the + * the ACPI interpreter and keels over since IRQ 9 has not been + * setup as we had setup IRQ 20 for it). + */ + if (acpi_gsi_to_irq(gsi, &irq) == 0) { + /* Use the provided value if it's valid. */ + if (irq >= 0) + gsi_override = irq; + } + + gsi = xen_register_gsi(gsi, gsi_override, trigger, polarity); printk(KERN_INFO "xen: acpi sci %d\n", gsi); return; } -static int acpi_register_gsi_xen(struct device *dev, u32 gsi, - int trigger, int polarity) +int __init pci_xen_initial_domain(void) { - return xen_register_gsi(gsi, trigger, polarity); -} + int irq; -static int __init pci_xen_initial_domain(void) -{ #ifdef CONFIG_PCI_MSI x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs; x86_msi.teardown_msi_irq = xen_teardown_msi_irq; #endif xen_setup_acpi_sci(); __acpi_register_gsi = acpi_register_gsi_xen; - - return 0; -} - -void __init xen_setup_pirqs(void) -{ - int pirq, irq; - - pci_xen_initial_domain(); - - if (0 == nr_ioapics) { - for (irq = 0; irq < NR_IRQS_LEGACY; irq++) { - pirq = xen_allocate_pirq_gsi(irq); - if (WARN(pirq < 0, - "Could not allocate PIRQ for legacy interrupt\n")) - break; - irq = xen_bind_pirq_gsi_to_irq(irq, pirq, 0, "xt-pic"); - } - return; - } - /* Pre-allocate legacy irqs */ for (irq = 0; irq < NR_IRQS_LEGACY; irq++) { int trigger, polarity; @@ -467,13 +436,17 @@ void __init xen_setup_pirqs(void) if (acpi_get_override_irq(irq, &trigger, &polarity) == -1) continue; - xen_register_pirq(irq, - trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE); + xen_register_pirq(irq, -1 /* no GSI override */, + trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE, + true /* Map GSI to PIRQ */); } + if (0 == nr_ioapics) { + for (irq = 0; irq < NR_IRQS_LEGACY; irq++) + xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic"); + } + return 0; } -#endif -#ifdef CONFIG_XEN_DOM0 struct xen_device_domain_owner { domid_t domain; struct pci_dev *dev; diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 0d3a4fa34560..899e393d8e73 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -310,14 +310,31 @@ void __init efi_reserve_boot_services(void) for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { efi_memory_desc_t *md = p; - unsigned long long start = md->phys_addr; - unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + u64 start = md->phys_addr; + u64 size = md->num_pages << EFI_PAGE_SHIFT; if (md->type != EFI_BOOT_SERVICES_CODE && md->type != EFI_BOOT_SERVICES_DATA) continue; - - memblock_x86_reserve_range(start, start + size, "EFI Boot"); + /* Only reserve where possible: + * - Not within any already allocated areas + * - Not over any memory area (really needed, if above?) + * - Not within any part of the kernel + * - Not the bios reserved area + */ + if ((start+size >= virt_to_phys(_text) + && start <= virt_to_phys(_end)) || + !e820_all_mapped(start, start+size, E820_RAM) || + memblock_x86_check_reserved_size(&start, &size, + 1<<EFI_PAGE_SHIFT)) { + /* Could not reserve, skip it */ + md->num_pages = 0; + memblock_dbg(PFX "Could not reserve boot range " + "[0x%010llx-0x%010llx]\n", + start, start+size-1); + } else + memblock_x86_reserve_range(start, start+size, + "EFI Boot"); } } @@ -334,6 +351,10 @@ static void __init efi_free_boot_services(void) md->type != EFI_BOOT_SERVICES_DATA) continue; + /* Could not reserve boot area */ + if (!size) + continue; + free_bootmem_late(start, size); } } @@ -483,9 +504,6 @@ void __init efi_init(void) x86_platform.set_wallclock = efi_set_rtc_mmss; #endif - /* Setup for EFI runtime service */ - reboot_type = BOOT_EFI; - #if EFI_DEBUG print_efi_memmap(); #endif diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 17c565de3d64..a6575b949b11 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -18,5 +18,5 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o - +obj-$(CONFIG_XEN_DOM0) += vga.o obj-$(CONFIG_SWIOTLB_XEN) += pci-swiotlb-xen.o diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index dd7b88f2ec7a..53257421082b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1033,6 +1033,13 @@ static void xen_machine_halt(void) xen_reboot(SHUTDOWN_poweroff); } +static void xen_machine_power_off(void) +{ + if (pm_power_off) + pm_power_off(); + xen_reboot(SHUTDOWN_poweroff); +} + static void xen_crash_shutdown(struct pt_regs *regs) { xen_reboot(SHUTDOWN_crash); @@ -1058,7 +1065,7 @@ int xen_panic_handler_init(void) static const struct machine_ops xen_machine_ops __initconst = { .restart = xen_restart, .halt = xen_machine_halt, - .power_off = xen_machine_halt, + .power_off = xen_machine_power_off, .shutdown = xen_machine_halt, .crash_shutdown = xen_crash_shutdown, .emergency_restart = xen_emergency_restart, @@ -1241,6 +1248,14 @@ asmlinkage void __init xen_start_kernel(void) if (pci_xen) x86_init.pci.arch_init = pci_xen_init; } else { + const struct dom0_vga_console_info *info = + (void *)((char *)xen_start_info + + xen_start_info->console.dom0.info_off); + + xen_init_vga(info, xen_start_info->console.dom0.info_size); + xen_start_info->console.domU.mfn = 0; + xen_start_info->console.domU.evtchn = 0; + /* Make sure ACS will be enabled */ pci_request_acs(); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index dc708dcc62f1..0ccccb67a993 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -59,6 +59,7 @@ #include <asm/page.h> #include <asm/init.h> #include <asm/pat.h> +#include <asm/smp.h> #include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -1231,7 +1232,11 @@ static void xen_flush_tlb_others(const struct cpumask *cpus, { struct { struct mmuext_op op; +#ifdef CONFIG_SMP + DECLARE_BITMAP(mask, num_processors); +#else DECLARE_BITMAP(mask, NR_CPUS); +#endif } *args; struct multicall_space mcs; @@ -1599,6 +1604,11 @@ static void __init xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn) for (pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) { pte_t pte; +#ifdef CONFIG_X86_32 + if (pfn > max_pfn_mapped) + max_pfn_mapped = pfn; +#endif + if (!pte_none(pte_page[pteidx])) continue; @@ -1766,7 +1776,9 @@ pgd_t * __init xen_setup_kernel_pagetable(pgd_t *pgd, initial_kernel_pmd = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE); - max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->mfn_list)); + max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) + + xen_start_info->nr_pt_frames * PAGE_SIZE + + 512*1024); kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd); memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD); diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c index 25c52f94a27c..ffcf2615640b 100644 --- a/arch/x86/xen/platform-pci-unplug.c +++ b/arch/x86/xen/platform-pci-unplug.c @@ -35,7 +35,7 @@ EXPORT_SYMBOL_GPL(xen_platform_pci_unplug); #ifdef CONFIG_XEN_PVHVM static int xen_emul_unplug; -static int __init check_platform_magic(void) +static int check_platform_magic(void) { short magic; char protocol; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index be1a464f6d66..60aeeb56948f 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -227,11 +227,7 @@ char * __init xen_memory_setup(void) memcpy(map_raw, map, sizeof(map)); e820.nr_map = 0; -#ifdef CONFIG_X86_32 xen_extra_mem_start = mem_end; -#else - xen_extra_mem_start = max((1ULL << 32), mem_end); -#endif for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end; @@ -266,6 +262,12 @@ char * __init xen_memory_setup(void) if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } + /* Align the balloon area so that max_low_pfn does not get set + * to be at the _end_ of the PCI gap at the far end (fee01000). + * Note that xen_extra_mem_start gets set in the loop above to be + * past the last E820 region. */ + if (xen_initial_domain() && (xen_extra_mem_start < (1ULL<<32))) + xen_extra_mem_start = (1ULL<<32); /* * In domU, the ISA region is normal, usable memory, but we diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 41038c01de40..b4533a86d7e4 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -205,11 +205,18 @@ static void __init xen_smp_prepare_boot_cpu(void) static void __init xen_smp_prepare_cpus(unsigned int max_cpus) { unsigned cpu; + unsigned int i; xen_init_lock_cpu(0); smp_store_cpu_info(0); cpu_data(0).x86_max_cores = 1; + + for_each_possible_cpu(i) { + zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL); + zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL); + zalloc_cpumask_var(&per_cpu(cpu_llc_shared_map, i), GFP_KERNEL); + } set_cpu_sibling_map(0); if (xen_smp_intr_init(0)) diff --git a/arch/x86/xen/vga.c b/arch/x86/xen/vga.c new file mode 100644 index 000000000000..1cd7f4d11e29 --- /dev/null +++ b/arch/x86/xen/vga.c @@ -0,0 +1,67 @@ +#include <linux/screen_info.h> +#include <linux/init.h> + +#include <asm/bootparam.h> +#include <asm/setup.h> + +#include <xen/interface/xen.h> + +#include "xen-ops.h" + +void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size) +{ + struct screen_info *screen_info = &boot_params.screen_info; + + /* This is drawn from a dump from vgacon:startup in + * standard Linux. */ + screen_info->orig_video_mode = 3; + screen_info->orig_video_isVGA = 1; + screen_info->orig_video_lines = 25; + screen_info->orig_video_cols = 80; + screen_info->orig_video_ega_bx = 3; + screen_info->orig_video_points = 16; + screen_info->orig_y = screen_info->orig_video_lines - 1; + + switch (info->video_type) { + case XEN_VGATYPE_TEXT_MODE_3: + if (size < offsetof(struct dom0_vga_console_info, u.text_mode_3) + + sizeof(info->u.text_mode_3)) + break; + screen_info->orig_video_lines = info->u.text_mode_3.rows; + screen_info->orig_video_cols = info->u.text_mode_3.columns; + screen_info->orig_x = info->u.text_mode_3.cursor_x; + screen_info->orig_y = info->u.text_mode_3.cursor_y; + screen_info->orig_video_points = + info->u.text_mode_3.font_height; + break; + + case XEN_VGATYPE_VESA_LFB: + if (size < offsetof(struct dom0_vga_console_info, + u.vesa_lfb.gbl_caps)) + break; + screen_info->orig_video_isVGA = VIDEO_TYPE_VLFB; + screen_info->lfb_width = info->u.vesa_lfb.width; + screen_info->lfb_height = info->u.vesa_lfb.height; + screen_info->lfb_depth = info->u.vesa_lfb.bits_per_pixel; + screen_info->lfb_base = info->u.vesa_lfb.lfb_base; + screen_info->lfb_size = info->u.vesa_lfb.lfb_size; + screen_info->lfb_linelength = info->u.vesa_lfb.bytes_per_line; + screen_info->red_size = info->u.vesa_lfb.red_size; + screen_info->red_pos = info->u.vesa_lfb.red_pos; + screen_info->green_size = info->u.vesa_lfb.green_size; + screen_info->green_pos = info->u.vesa_lfb.green_pos; + screen_info->blue_size = info->u.vesa_lfb.blue_size; + screen_info->blue_pos = info->u.vesa_lfb.blue_pos; + screen_info->rsvd_size = info->u.vesa_lfb.rsvd_size; + screen_info->rsvd_pos = info->u.vesa_lfb.rsvd_pos; + if (size >= offsetof(struct dom0_vga_console_info, + u.vesa_lfb.gbl_caps) + + sizeof(info->u.vesa_lfb.gbl_caps)) + screen_info->capabilities = info->u.vesa_lfb.gbl_caps; + if (size >= offsetof(struct dom0_vga_console_info, + u.vesa_lfb.mode_attrs) + + sizeof(info->u.vesa_lfb.mode_attrs)) + screen_info->vesa_attributes = info->u.vesa_lfb.mode_attrs; + break; + } +} diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 97dfdc8757b3..b095739ccd4c 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -88,6 +88,17 @@ static inline void xen_uninit_lock_cpu(int cpu) } #endif +struct dom0_vga_console_info; + +#ifdef CONFIG_XEN_DOM0 +void __init xen_init_vga(const struct dom0_vga_console_info *, size_t size); +#else +static inline void __init xen_init_vga(const struct dom0_vga_console_info *info, + size_t size) +{ +} +#endif + /* Declare an asm function, along with symbols needed to make it inlineable */ #define DECL_ASM(ret, name, ...) \ |