diff options
Diffstat (limited to 'drivers/acpi/executer/exutils.c')
| -rw-r--r-- | drivers/acpi/executer/exutils.c | 421 |
1 files changed, 0 insertions, 421 deletions
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c deleted file mode 100644 index 0ecdb70c4980..000000000000 --- a/drivers/acpi/executer/exutils.c +++ /dev/null @@ -1,421 +0,0 @@ - -/****************************************************************************** - * - * Module Name: exutils - interpreter/scanner utilities - * - *****************************************************************************/ - -/* - * Copyright (C) 2000 - 2008, Intel Corp. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce at minimum a disclaimer - * substantially similar to the "NO WARRANTY" disclaimer below - * ("Disclaimer") and any redistribution must be conditioned upon - * including a substantially similar Disclaimer requirement for further - * binary redistribution. - * 3. Neither the names of the above-listed copyright holders nor the names - * of any contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * NO WARRANTY - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGES. - */ - -/* - * DEFINE_AML_GLOBALS is tested in amlcode.h - * to determine whether certain global names should be "defined" or only - * "declared" in the current compilation. This enhances maintainability - * by enabling a single header file to embody all knowledge of the names - * in question. - * - * Exactly one module of any executable should #define DEFINE_GLOBALS - * before #including the header files which use this convention. The - * names in question will be defined and initialized in that module, - * and declared as extern in all other modules which #include those - * header files. - */ - -#define DEFINE_AML_GLOBALS - -#include <acpi/acpi.h> -#include <acpi/accommon.h> -#include <acpi/acinterp.h> -#include <acpi/amlcode.h> - -#define _COMPONENT ACPI_EXECUTER -ACPI_MODULE_NAME("exutils") - -/* Local prototypes */ -static u32 acpi_ex_digits_needed(acpi_integer value, u32 base); - -#ifndef ACPI_NO_METHOD_EXECUTION -/******************************************************************************* - * - * FUNCTION: acpi_ex_enter_interpreter - * - * PARAMETERS: None - * - * RETURN: None - * - * DESCRIPTION: Enter the interpreter execution region. Failure to enter - * the interpreter region is a fatal system error. Used in - * conjunction with exit_interpreter. - * - ******************************************************************************/ - -void acpi_ex_enter_interpreter(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ex_enter_interpreter); - - status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER); - if (ACPI_FAILURE(status)) { - ACPI_ERROR((AE_INFO, - "Could not acquire AML Interpreter mutex")); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_reacquire_interpreter - * - * PARAMETERS: None - * - * RETURN: None - * - * DESCRIPTION: Reacquire the interpreter execution region from within the - * interpreter code. Failure to enter the interpreter region is a - * fatal system error. Used in conjuction with - * relinquish_interpreter - * - ******************************************************************************/ - -void acpi_ex_reacquire_interpreter(void) -{ - ACPI_FUNCTION_TRACE(ex_reacquire_interpreter); - - /* - * If the global serialized flag is set, do not release the interpreter, - * since it was not actually released by acpi_ex_relinquish_interpreter. - * This forces the interpreter to be single threaded. - */ - if (!acpi_gbl_all_methods_serialized) { - acpi_ex_enter_interpreter(); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_exit_interpreter - * - * PARAMETERS: None - * - * RETURN: None - * - * DESCRIPTION: Exit the interpreter execution region. This is the top level - * routine used to exit the interpreter when all processing has - * been completed. - * - ******************************************************************************/ - -void acpi_ex_exit_interpreter(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ex_exit_interpreter); - - status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER); - if (ACPI_FAILURE(status)) { - ACPI_ERROR((AE_INFO, - "Could not release AML Interpreter mutex")); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_relinquish_interpreter - * - * PARAMETERS: None - * - * RETURN: None - * - * DESCRIPTION: Exit the interpreter execution region, from within the - * interpreter - before attempting an operation that will possibly - * block the running thread. - * - * Cases where the interpreter is unlocked internally - * 1) Method to be blocked on a Sleep() AML opcode - * 2) Method to be blocked on an Acquire() AML opcode - * 3) Method to be blocked on a Wait() AML opcode - * 4) Method to be blocked to acquire the global lock - * 5) Method to be blocked waiting to execute a serialized control method - * that is currently executing - * 6) About to invoke a user-installed opregion handler - * - ******************************************************************************/ - -void acpi_ex_relinquish_interpreter(void) -{ - ACPI_FUNCTION_TRACE(ex_relinquish_interpreter); - - /* - * If the global serialized flag is set, do not release the interpreter. - * This forces the interpreter to be single threaded. - */ - if (!acpi_gbl_all_methods_serialized) { - acpi_ex_exit_interpreter(); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_truncate_for32bit_table - * - * PARAMETERS: obj_desc - Object to be truncated - * - * RETURN: none - * - * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is - * 32-bit, as determined by the revision of the DSDT. - * - ******************************************************************************/ - -void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc) -{ - - ACPI_FUNCTION_ENTRY(); - - /* - * Object must be a valid number and we must be executing - * a control method. NS node could be there for AML_INT_NAMEPATH_OP. - */ - if ((!obj_desc) || - (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) || - (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { - return; - } - - if (acpi_gbl_integer_byte_width == 4) { - /* - * We are running a method that exists in a 32-bit ACPI table. - * Truncate the value to 32 bits by zeroing out the upper 32-bit field - */ - obj_desc->integer.value &= (acpi_integer) ACPI_UINT32_MAX; - } -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_acquire_global_lock - * - * PARAMETERS: field_flags - Flags with Lock rule: - * always_lock or never_lock - * - * RETURN: None - * - * DESCRIPTION: Obtain the ACPI hardware Global Lock, only if the field - * flags specifiy that it is to be obtained before field access. - * - ******************************************************************************/ - -void acpi_ex_acquire_global_lock(u32 field_flags) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ex_acquire_global_lock); - - /* Only use the lock if the always_lock bit is set */ - - if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) { - return_VOID; - } - - /* Attempt to get the global lock, wait forever */ - - status = acpi_ex_acquire_mutex_object(ACPI_WAIT_FOREVER, - acpi_gbl_global_lock_mutex, - acpi_os_get_thread_id()); - - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Could not acquire Global Lock")); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_release_global_lock - * - * PARAMETERS: field_flags - Flags with Lock rule: - * always_lock or never_lock - * - * RETURN: None - * - * DESCRIPTION: Release the ACPI hardware Global Lock - * - ******************************************************************************/ - -void acpi_ex_release_global_lock(u32 field_flags) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ex_release_global_lock); - - /* Only use the lock if the always_lock bit is set */ - - if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) { - return_VOID; - } - - /* Release the global lock */ - - status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex); - if (ACPI_FAILURE(status)) { - - /* Report the error, but there isn't much else we can do */ - - ACPI_EXCEPTION((AE_INFO, status, - "Could not release Global Lock")); - } - - return_VOID; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_digits_needed - * - * PARAMETERS: Value - Value to be represented - * Base - Base of representation - * - * RETURN: The number of digits. - * - * DESCRIPTION: Calculate the number of digits needed to represent the Value - * in the given Base (Radix) - * - ******************************************************************************/ - -static u32 acpi_ex_digits_needed(acpi_integer value, u32 base) -{ - u32 num_digits; - acpi_integer current_value; - - ACPI_FUNCTION_TRACE(ex_digits_needed); - - /* acpi_integer is unsigned, so we don't worry about a '-' prefix */ - - if (value == 0) { - return_UINT32(1); - } - - current_value = value; - num_digits = 0; - - /* Count the digits in the requested base */ - - while (current_value) { - (void)acpi_ut_short_divide(current_value, base, ¤t_value, - NULL); - num_digits++; - } - - return_UINT32(num_digits); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_eisa_id_to_string - * - * PARAMETERS: numeric_id - EISA ID to be converted - * out_string - Where to put the converted string (8 bytes) - * - * RETURN: None - * - * DESCRIPTION: Convert a numeric EISA ID to string representation - * - ******************************************************************************/ - -void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string) -{ - u32 eisa_id; - - ACPI_FUNCTION_ENTRY(); - - /* Swap ID to big-endian to get contiguous bits */ - - eisa_id = acpi_ut_dword_byte_swap(numeric_id); - - out_string[0] = (char)('@' + (((unsigned long)eisa_id >> 26) & 0x1f)); - out_string[1] = (char)('@' + ((eisa_id >> 21) & 0x1f)); - out_string[2] = (char)('@' + ((eisa_id >> 16) & 0x1f)); - out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 12); - out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 8); - out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 4); - out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 0); - out_string[7] = 0; -} - -/******************************************************************************* - * - * FUNCTION: acpi_ex_unsigned_integer_to_string - * - * PARAMETERS: Value - Value to be converted - * out_string - Where to put the converted string (8 bytes) - * - * RETURN: None, string - * - * DESCRIPTION: Convert a number to string representation. Assumes string - * buffer is large enough to hold the string. - * - ******************************************************************************/ - -void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string) -{ - u32 count; - u32 digits_needed; - u32 remainder; - - ACPI_FUNCTION_ENTRY(); - - digits_needed = acpi_ex_digits_needed(value, 10); - out_string[digits_needed] = 0; - - for (count = digits_needed; count > 0; count--) { - (void)acpi_ut_short_divide(value, 10, &value, &remainder); - out_string[count - 1] = (char)('0' + remainder); - } -} - -#endif |