summaryrefslogtreecommitdiff
path: root/drivers/clk
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk')
-rw-r--r--drivers/clk/clk-si514.c38
-rw-r--r--drivers/clk/clk-si544.c38
-rw-r--r--drivers/clk/clk.c215
-rw-r--r--drivers/clk/qcom/gcc-ipq806x.c3
-rw-r--r--drivers/clk/qcom/gcc-mdm9615.c2
-rw-r--r--drivers/clk/qcom/gcc-msm8660.c5
-rw-r--r--drivers/clk/qcom/gcc-msm8960.c5
7 files changed, 281 insertions, 25 deletions
diff --git a/drivers/clk/clk-si514.c b/drivers/clk/clk-si514.c
index 09b6718956bd..153b3a2b5857 100644
--- a/drivers/clk/clk-si514.c
+++ b/drivers/clk/clk-si514.c
@@ -74,6 +74,33 @@ static int si514_enable_output(struct clk_si514 *data, bool enable)
SI514_CONTROL_OE, enable ? SI514_CONTROL_OE : 0);
}
+static int si514_prepare(struct clk_hw *hw)
+{
+ struct clk_si514 *data = to_clk_si514(hw);
+
+ return si514_enable_output(data, true);
+}
+
+static void si514_unprepare(struct clk_hw *hw)
+{
+ struct clk_si514 *data = to_clk_si514(hw);
+
+ si514_enable_output(data, false);
+}
+
+static int si514_is_prepared(struct clk_hw *hw)
+{
+ struct clk_si514 *data = to_clk_si514(hw);
+ unsigned int val;
+ int err;
+
+ err = regmap_read(data->regmap, SI514_REG_CONTROL, &val);
+ if (err < 0)
+ return err;
+
+ return !!(val & SI514_CONTROL_OE);
+}
+
/* Retrieve clock multiplier and dividers from hardware */
static int si514_get_muldiv(struct clk_si514 *data,
struct clk_si514_muldiv *settings)
@@ -235,12 +262,17 @@ static int si514_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_si514 *data = to_clk_si514(hw);
struct clk_si514_muldiv settings;
+ unsigned int old_oe_state;
int err;
err = si514_calc_muldiv(&settings, rate);
if (err)
return err;
+ err = regmap_read(data->regmap, SI514_REG_CONTROL, &old_oe_state);
+ if (err)
+ return err;
+
si514_enable_output(data, false);
err = si514_set_muldiv(data, &settings);
@@ -255,12 +287,16 @@ static int si514_set_rate(struct clk_hw *hw, unsigned long rate,
/* Applying a new frequency can take up to 10ms */
usleep_range(10000, 12000);
- si514_enable_output(data, true);
+ if (old_oe_state & SI514_CONTROL_OE)
+ si514_enable_output(data, true);
return err;
}
static const struct clk_ops si514_clk_ops = {
+ .prepare = si514_prepare,
+ .unprepare = si514_unprepare,
+ .is_prepared = si514_is_prepared,
.recalc_rate = si514_recalc_rate,
.round_rate = si514_round_rate,
.set_rate = si514_set_rate,
diff --git a/drivers/clk/clk-si544.c b/drivers/clk/clk-si544.c
index 1e2a3b8f9454..64e607f3232a 100644
--- a/drivers/clk/clk-si544.c
+++ b/drivers/clk/clk-si544.c
@@ -86,6 +86,33 @@ static int si544_enable_output(struct clk_si544 *data, bool enable)
SI544_OE_STATE_ODC_OE, enable ? SI544_OE_STATE_ODC_OE : 0);
}
+static int si544_prepare(struct clk_hw *hw)
+{
+ struct clk_si544 *data = to_clk_si544(hw);
+
+ return si544_enable_output(data, true);
+}
+
+static void si544_unprepare(struct clk_hw *hw)
+{
+ struct clk_si544 *data = to_clk_si544(hw);
+
+ si544_enable_output(data, false);
+}
+
+static int si544_is_prepared(struct clk_hw *hw)
+{
+ struct clk_si544 *data = to_clk_si544(hw);
+ unsigned int val;
+ int err;
+
+ err = regmap_read(data->regmap, SI544_REG_OE_STATE, &val);
+ if (err < 0)
+ return err;
+
+ return !!(val & SI544_OE_STATE_ODC_OE);
+}
+
/* Retrieve clock multiplier and dividers from hardware */
static int si544_get_muldiv(struct clk_si544 *data,
struct clk_si544_muldiv *settings)
@@ -273,6 +300,7 @@ static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct clk_si544 *data = to_clk_si544(hw);
struct clk_si544_muldiv settings;
+ unsigned int old_oe_state;
int err;
if (!is_valid_frequency(data, rate))
@@ -282,6 +310,10 @@ static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
if (err)
return err;
+ err = regmap_read(data->regmap, SI544_REG_OE_STATE, &old_oe_state);
+ if (err)
+ return err;
+
si544_enable_output(data, false);
/* Allow FCAL for this frequency update */
@@ -303,12 +335,16 @@ static int si544_set_rate(struct clk_hw *hw, unsigned long rate,
/* Applying a new frequency can take up to 10ms */
usleep_range(10000, 12000);
- si544_enable_output(data, true);
+ if (old_oe_state & SI544_OE_STATE_ODC_OE)
+ si544_enable_output(data, true);
return err;
}
static const struct clk_ops si544_clk_ops = {
+ .prepare = si544_prepare,
+ .unprepare = si544_unprepare,
+ .is_prepared = si544_is_prepared,
.recalc_rate = si544_recalc_rate,
.round_rate = si544_round_rate,
.set_rate = si544_set_rate,
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 9760b526ca31..e108f591d84a 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -68,6 +68,7 @@ struct clk_core {
unsigned long max_rate;
unsigned long accuracy;
int phase;
+ struct clk_duty duty;
struct hlist_head children;
struct hlist_node child_node;
struct hlist_head clks;
@@ -691,6 +692,9 @@ static void clk_core_unprepare(struct clk_core *core)
"Unpreparing critical %s\n", core->name))
return;
+ if (core->flags & CLK_SET_RATE_GATE)
+ clk_core_rate_unprotect(core);
+
if (--core->prepare_count > 0)
return;
@@ -765,6 +769,16 @@ static int clk_core_prepare(struct clk_core *core)
core->prepare_count++;
+ /*
+ * CLK_SET_RATE_GATE is a special case of clock protection
+ * Instead of a consumer claiming exclusive rate control, it is
+ * actually the provider which prevents any consumer from making any
+ * operation which could result in a rate change or rate glitch while
+ * the clock is prepared.
+ */
+ if (core->flags & CLK_SET_RATE_GATE)
+ clk_core_rate_protect(core);
+
return 0;
unprepare:
clk_core_unprepare(core->parent);
@@ -1888,9 +1902,6 @@ static int clk_core_set_rate_nolock(struct clk_core *core,
if (clk_core_rate_is_protected(core))
return -EBUSY;
- if ((core->flags & CLK_SET_RATE_GATE) && core->prepare_count)
- return -EBUSY;
-
/* calculate new rates and get the topmost changed clock */
top = clk_calc_new_rates(core, req_rate);
if (!top)
@@ -2402,6 +2413,172 @@ int clk_get_phase(struct clk *clk)
}
EXPORT_SYMBOL_GPL(clk_get_phase);
+static void clk_core_reset_duty_cycle_nolock(struct clk_core *core)
+{
+ /* Assume a default value of 50% */
+ core->duty.num = 1;
+ core->duty.den = 2;
+}
+
+static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core);
+
+static int clk_core_update_duty_cycle_nolock(struct clk_core *core)
+{
+ struct clk_duty *duty = &core->duty;
+ int ret = 0;
+
+ if (!core->ops->get_duty_cycle)
+ return clk_core_update_duty_cycle_parent_nolock(core);
+
+ ret = core->ops->get_duty_cycle(core->hw, duty);
+ if (ret)
+ goto reset;
+
+ /* Don't trust the clock provider too much */
+ if (duty->den == 0 || duty->num > duty->den) {
+ ret = -EINVAL;
+ goto reset;
+ }
+
+ return 0;
+
+reset:
+ clk_core_reset_duty_cycle_nolock(core);
+ return ret;
+}
+
+static int clk_core_update_duty_cycle_parent_nolock(struct clk_core *core)
+{
+ int ret = 0;
+
+ if (core->parent &&
+ core->flags & CLK_DUTY_CYCLE_PARENT) {
+ ret = clk_core_update_duty_cycle_nolock(core->parent);
+ memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
+ } else {
+ clk_core_reset_duty_cycle_nolock(core);
+ }
+
+ return ret;
+}
+
+static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
+ struct clk_duty *duty);
+
+static int clk_core_set_duty_cycle_nolock(struct clk_core *core,
+ struct clk_duty *duty)
+{
+ int ret;
+
+ lockdep_assert_held(&prepare_lock);
+
+ if (clk_core_rate_is_protected(core))
+ return -EBUSY;
+
+ trace_clk_set_duty_cycle(core, duty);
+
+ if (!core->ops->set_duty_cycle)
+ return clk_core_set_duty_cycle_parent_nolock(core, duty);
+
+ ret = core->ops->set_duty_cycle(core->hw, duty);
+ if (!ret)
+ memcpy(&core->duty, duty, sizeof(*duty));
+
+ trace_clk_set_duty_cycle_complete(core, duty);
+
+ return ret;
+}
+
+static int clk_core_set_duty_cycle_parent_nolock(struct clk_core *core,
+ struct clk_duty *duty)
+{
+ int ret = 0;
+
+ if (core->parent &&
+ core->flags & (CLK_DUTY_CYCLE_PARENT | CLK_SET_RATE_PARENT)) {
+ ret = clk_core_set_duty_cycle_nolock(core->parent, duty);
+ memcpy(&core->duty, &core->parent->duty, sizeof(core->duty));
+ }
+
+ return ret;
+}
+
+/**
+ * clk_set_duty_cycle - adjust the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @num: numerator of the duty cycle ratio to be applied
+ * @den: denominator of the duty cycle ratio to be applied
+ *
+ * Apply the duty cycle ratio if the ratio is valid and the clock can
+ * perform this operation
+ *
+ * Returns (0) on success, a negative errno otherwise.
+ */
+int clk_set_duty_cycle(struct clk *clk, unsigned int num, unsigned int den)
+{
+ int ret;
+ struct clk_duty duty;
+
+ if (!clk)
+ return 0;
+
+ /* sanity check the ratio */
+ if (den == 0 || num > den)
+ return -EINVAL;
+
+ duty.num = num;
+ duty.den = den;
+
+ clk_prepare_lock();
+
+ if (clk->exclusive_count)
+ clk_core_rate_unprotect(clk->core);
+
+ ret = clk_core_set_duty_cycle_nolock(clk->core, &duty);
+
+ if (clk->exclusive_count)
+ clk_core_rate_protect(clk->core);
+
+ clk_prepare_unlock();
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(clk_set_duty_cycle);
+
+static int clk_core_get_scaled_duty_cycle(struct clk_core *core,
+ unsigned int scale)
+{
+ struct clk_duty *duty = &core->duty;
+ int ret;
+
+ clk_prepare_lock();
+
+ ret = clk_core_update_duty_cycle_nolock(core);
+ if (!ret)
+ ret = mult_frac(scale, duty->num, duty->den);
+
+ clk_prepare_unlock();
+
+ return ret;
+}
+
+/**
+ * clk_get_scaled_duty_cycle - return the duty cycle ratio of a clock signal
+ * @clk: clock signal source
+ * @scale: scaling factor to be applied to represent the ratio as an integer
+ *
+ * Returns the duty cycle ratio of a clock node multiplied by the provided
+ * scaling factor, or negative errno on error.
+ */
+int clk_get_scaled_duty_cycle(struct clk *clk, unsigned int scale)
+{
+ if (!clk)
+ return 0;
+
+ return clk_core_get_scaled_duty_cycle(clk->core, scale);
+}
+EXPORT_SYMBOL_GPL(clk_get_scaled_duty_cycle);
+
/**
* clk_is_match - check if two clk's point to the same hardware clock
* @p: clk compared against q
@@ -2455,12 +2632,13 @@ static void clk_summary_show_one(struct seq_file *s, struct clk_core *c,
if (!c)
return;
- seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %-3d\n",
+ seq_printf(s, "%*s%-*s %7d %8d %8d %11lu %10lu %5d %6d\n",
level * 3 + 1, "",
30 - level * 3, c->name,
c->enable_count, c->prepare_count, c->protect_count,
clk_core_get_rate(c), clk_core_get_accuracy(c),
- clk_core_get_phase(c));
+ clk_core_get_phase(c),
+ clk_core_get_scaled_duty_cycle(c, 100000));
}
static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c,
@@ -2482,9 +2660,9 @@ static int clk_summary_show(struct seq_file *s, void *data)
struct clk_core *c;
struct hlist_head **lists = (struct hlist_head **)s->private;
- seq_puts(s, " enable prepare protect \n");
- seq_puts(s, " clock count count count rate accuracy phase\n");
- seq_puts(s, "----------------------------------------------------------------------------------------\n");
+ seq_puts(s, " enable prepare protect duty\n");
+ seq_puts(s, " clock count count count rate accuracy phase cycle\n");
+ seq_puts(s, "---------------------------------------------------------------------------------------------\n");
clk_prepare_lock();
@@ -2511,6 +2689,8 @@ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
seq_printf(s, "\"rate\": %lu,", clk_core_get_rate(c));
seq_printf(s, "\"accuracy\": %lu,", clk_core_get_accuracy(c));
seq_printf(s, "\"phase\": %d", clk_core_get_phase(c));
+ seq_printf(s, "\"duty_cycle\": %u",
+ clk_core_get_scaled_duty_cycle(c, 100000));
}
static void clk_dump_subtree(struct seq_file *s, struct clk_core *c, int level)
@@ -2572,6 +2752,7 @@ static const struct {
ENTRY(CLK_SET_RATE_UNGATE),
ENTRY(CLK_IS_CRITICAL),
ENTRY(CLK_OPS_PARENT_ENABLE),
+ ENTRY(CLK_DUTY_CYCLE_PARENT),
#undef ENTRY
};
@@ -2610,6 +2791,17 @@ static int possible_parents_show(struct seq_file *s, void *data)
}
DEFINE_SHOW_ATTRIBUTE(possible_parents);
+static int clk_duty_cycle_show(struct seq_file *s, void *data)
+{
+ struct clk_core *core = s->private;
+ struct clk_duty *duty = &core->duty;
+
+ seq_printf(s, "%u/%u\n", duty->num, duty->den);
+
+ return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(clk_duty_cycle);
+
static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
{
struct dentry *root;
@@ -2628,6 +2820,8 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
debugfs_create_u32("clk_enable_count", 0444, root, &core->enable_count);
debugfs_create_u32("clk_protect_count", 0444, root, &core->protect_count);
debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
+ debugfs_create_file("clk_duty_cycle", 0444, root, core,
+ &clk_duty_cycle_fops);
if (core->num_parents > 1)
debugfs_create_file("clk_possible_parents", 0444, root, core,
@@ -2846,6 +3040,11 @@ static int __clk_core_init(struct clk_core *core)
core->phase = 0;
/*
+ * Set clk's duty cycle.
+ */
+ clk_core_update_duty_cycle_nolock(core);
+
+ /*
* Set clk's rate. The preferred method is to use .recalc_rate. For
* simple clocks and lazy developers the default fallback is to use the
* parent's rate. If a clock doesn't have a parent (or is orphaned)
diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
index 28eb200d0f1e..5f61225657ab 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -1220,7 +1220,6 @@ static struct clk_rcg sdc1_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1269,7 +1268,6 @@ static struct clk_rcg sdc3_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1353,7 +1351,6 @@ static struct clk_rcg tsif_ref_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
diff --git a/drivers/clk/qcom/gcc-mdm9615.c b/drivers/clk/qcom/gcc-mdm9615.c
index b99dd406e907..849046fbed6d 100644
--- a/drivers/clk/qcom/gcc-mdm9615.c
+++ b/drivers/clk/qcom/gcc-mdm9615.c
@@ -947,7 +947,6 @@ static struct clk_rcg sdc1_src = {
.parent_names = gcc_cxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -996,7 +995,6 @@ static struct clk_rcg sdc2_src = {
.parent_names = gcc_cxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
index c347a0d44bc8..7e930e25c79f 100644
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
@@ -1558,7 +1558,6 @@ static struct clk_rcg sdc1_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1607,7 +1606,6 @@ static struct clk_rcg sdc2_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1656,7 +1654,6 @@ static struct clk_rcg sdc3_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1705,7 +1702,6 @@ static struct clk_rcg sdc4_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1754,7 +1750,6 @@ static struct clk_rcg sdc5_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index eb551c75fba6..fd495e0471bb 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -1628,7 +1628,6 @@ static struct clk_rcg sdc1_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1677,7 +1676,6 @@ static struct clk_rcg sdc2_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1726,7 +1724,6 @@ static struct clk_rcg sdc3_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1775,7 +1772,6 @@ static struct clk_rcg sdc4_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
@@ -1824,7 +1820,6 @@ static struct clk_rcg sdc5_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
- .flags = CLK_SET_RATE_GATE,
},
}
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 03:20:02 +0000