summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig18
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/coretemp.c11
-rw-r--r--drivers/hwmon/gpio-fan.c130
-rw-r--r--drivers/hwmon/ibmpex.c19
-rw-r--r--drivers/hwmon/ibmpowernv.c267
-rw-r--r--drivers/hwmon/it87.c298
-rw-r--r--drivers/hwmon/jc42.c16
-rw-r--r--drivers/hwmon/nct6775.c76
-rw-r--r--drivers/hwmon/nct7904.c593
-rw-r--r--drivers/hwmon/pwm-fan.c184
-rw-r--r--drivers/hwmon/vexpress.c2
12 files changed, 1374 insertions, 241 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 110fade9cb74..25d9e72627e9 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -510,6 +510,7 @@ config SENSORS_G762
config SENSORS_GPIO_FAN
tristate "GPIO fan"
depends on GPIOLIB
+ depends on THERMAL || THERMAL=n
help
If you say yes here you get support for fans connected to GPIO lines.
@@ -599,8 +600,8 @@ config SENSORS_IT87
help
If you say yes here you get support for ITE IT8705F, IT8712F,
IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
- IT8771E, IT8772E, IT8782F, IT8783E/F and IT8603E sensor chips,
- and the SiS950 clone.
+ IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
+ IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
This driver can also be built as a module. If so, the module
will be called it87.
@@ -624,7 +625,7 @@ config SENSORS_JC42
mobile devices and servers. Support will include, but not be limited
to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
- STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
+ STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
This driver can also be built as a module. If so, the module
will be called jc42.
@@ -1145,6 +1146,16 @@ config SENSORS_NCT7802
This driver can also be built as a module. If so, the module
will be called nct7802.
+config SENSORS_NCT7904
+ tristate "Nuvoton NCT7904"
+ depends on I2C
+ help
+ If you say yes here you get support for the Nuvoton NCT7904
+ hardware monitoring chip, including manual fan speed control.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct7904.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
@@ -1164,6 +1175,7 @@ source drivers/hwmon/pmbus/Kconfig
config SENSORS_PWM_FAN
tristate "PWM fan"
depends on (PWM && OF) || COMPILE_TEST
+ depends on THERMAL || THERMAL=n
help
If you say yes here you get support for fans connected to PWM lines.
The driver uses the generic PWM interface, thus it will work on a
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6c941472e707..b4a40f17e2aa 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -120,6 +120,7 @@ obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
+obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 5b7fec824f10..ed303ba3a593 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -397,14 +397,13 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev,
struct device_attribute *devattr, char *buf) = {
show_label, show_crit_alarm, show_temp, show_tjmax,
show_ttarget };
- static const char *const names[TOTAL_ATTRS] = {
- "temp%d_label", "temp%d_crit_alarm",
- "temp%d_input", "temp%d_crit",
- "temp%d_max" };
+ static const char *const suffixes[TOTAL_ATTRS] = {
+ "label", "crit_alarm", "input", "crit", "max"
+ };
for (i = 0; i < tdata->attr_size; i++) {
- snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
- attr_no);
+ snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH,
+ "temp%d_%s", attr_no, suffixes[i]);
sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index 36abf814b8c7..a3dae6d0082a 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -34,10 +34,13 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/thermal.h>
struct gpio_fan_data {
struct platform_device *pdev;
struct device *hwmon_dev;
+ /* Cooling device if any */
+ struct thermal_cooling_device *cdev;
struct mutex lock; /* lock GPIOs operations. */
int num_ctrl;
unsigned *ctrl;
@@ -387,6 +390,53 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
return 0;
}
+static int gpio_fan_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct gpio_fan_data *fan_data = cdev->devdata;
+
+ if (!fan_data)
+ return -EINVAL;
+
+ *state = fan_data->num_speed - 1;
+ return 0;
+}
+
+static int gpio_fan_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct gpio_fan_data *fan_data = cdev->devdata;
+ int r;
+
+ if (!fan_data)
+ return -EINVAL;
+
+ r = get_fan_speed_index(fan_data);
+ if (r < 0)
+ return r;
+
+ *state = r;
+ return 0;
+}
+
+static int gpio_fan_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct gpio_fan_data *fan_data = cdev->devdata;
+
+ if (!fan_data)
+ return -EINVAL;
+
+ set_fan_speed(fan_data, state);
+ return 0;
+}
+
+static const struct thermal_cooling_device_ops gpio_fan_cool_ops = {
+ .get_max_state = gpio_fan_get_max_state,
+ .get_cur_state = gpio_fan_get_cur_state,
+ .set_cur_state = gpio_fan_set_cur_state,
+};
+
#ifdef CONFIG_OF_GPIO
/*
* Translate OpenFirmware node properties into platform_data
@@ -404,10 +454,32 @@ static int gpio_fan_get_of_pdata(struct device *dev,
node = dev->of_node;
+ /* Alarm GPIO if one exists */
+ if (of_gpio_named_count(node, "alarm-gpios") > 0) {
+ struct gpio_fan_alarm *alarm;
+ int val;
+ enum of_gpio_flags flags;
+
+ alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
+ GFP_KERNEL);
+ if (!alarm)
+ return -ENOMEM;
+
+ val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
+ if (val < 0)
+ return val;
+ alarm->gpio = val;
+ alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
+
+ pdata->alarm = alarm;
+ }
+
/* Fill GPIO pin array */
pdata->num_ctrl = of_gpio_count(node);
if (pdata->num_ctrl <= 0) {
- dev_err(dev, "gpios DT property empty / missing");
+ if (pdata->alarm)
+ return 0;
+ dev_err(dev, "DT properties empty / missing");
return -ENODEV;
}
ctrl = devm_kzalloc(dev, pdata->num_ctrl * sizeof(unsigned),
@@ -460,26 +532,6 @@ static int gpio_fan_get_of_pdata(struct device *dev,
}
pdata->speed = speed;
- /* Alarm GPIO if one exists */
- if (of_gpio_named_count(node, "alarm-gpios") > 0) {
- struct gpio_fan_alarm *alarm;
- int val;
- enum of_gpio_flags flags;
-
- alarm = devm_kzalloc(dev, sizeof(struct gpio_fan_alarm),
- GFP_KERNEL);
- if (!alarm)
- return -ENOMEM;
-
- val = of_get_named_gpio_flags(node, "alarm-gpios", 0, &flags);
- if (val < 0)
- return val;
- alarm->gpio = val;
- alarm->active_low = flags & OF_GPIO_ACTIVE_LOW;
-
- pdata->alarm = alarm;
- }
-
return 0;
}
@@ -495,6 +547,11 @@ static int gpio_fan_probe(struct platform_device *pdev)
struct gpio_fan_data *fan_data;
struct gpio_fan_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
+ GFP_KERNEL);
+ if (!fan_data)
+ return -ENOMEM;
+
#ifdef CONFIG_OF_GPIO
if (!pdata) {
pdata = devm_kzalloc(&pdev->dev,
@@ -512,11 +569,6 @@ static int gpio_fan_probe(struct platform_device *pdev)
return -EINVAL;
#endif /* CONFIG_OF_GPIO */
- fan_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_fan_data),
- GFP_KERNEL);
- if (!fan_data)
- return -ENOMEM;
-
fan_data->pdev = pdev;
platform_set_drvdata(pdev, fan_data);
mutex_init(&fan_data->lock);
@@ -544,18 +596,39 @@ static int gpio_fan_probe(struct platform_device *pdev)
gpio_fan_groups);
if (IS_ERR(fan_data->hwmon_dev))
return PTR_ERR(fan_data->hwmon_dev);
+#ifdef CONFIG_OF_GPIO
+ /* Optional cooling device register for Device tree platforms */
+ fan_data->cdev = thermal_of_cooling_device_register(pdev->dev.of_node,
+ "gpio-fan",
+ fan_data,
+ &gpio_fan_cool_ops);
+#else /* CONFIG_OF_GPIO */
+ /* Optional cooling device register for non Device tree platforms */
+ fan_data->cdev = thermal_cooling_device_register("gpio-fan", fan_data,
+ &gpio_fan_cool_ops);
+#endif /* CONFIG_OF_GPIO */
dev_info(&pdev->dev, "GPIO fan initialized\n");
return 0;
}
-static void gpio_fan_shutdown(struct platform_device *pdev)
+static int gpio_fan_remove(struct platform_device *pdev)
{
- struct gpio_fan_data *fan_data = dev_get_drvdata(&pdev->dev);
+ struct gpio_fan_data *fan_data = platform_get_drvdata(pdev);
+
+ if (!IS_ERR(fan_data->cdev))
+ thermal_cooling_device_unregister(fan_data->cdev);
if (fan_data->ctrl)
set_fan_speed(fan_data, 0);
+
+ return 0;
+}
+
+static void gpio_fan_shutdown(struct platform_device *pdev)
+{
+ gpio_fan_remove(pdev);
}
#ifdef CONFIG_PM_SLEEP
@@ -589,6 +662,7 @@ static SIMPLE_DEV_PM_OPS(gpio_fan_pm, gpio_fan_suspend, gpio_fan_resume);
static struct platform_driver gpio_fan_driver = {
.probe = gpio_fan_probe,
+ .remove = gpio_fan_remove,
.shutdown = gpio_fan_shutdown,
.driver = {
.name = "gpio-fan",
diff --git a/drivers/hwmon/ibmpex.c b/drivers/hwmon/ibmpex.c
index 030e7ff589be..21b9c72f16bd 100644
--- a/drivers/hwmon/ibmpex.c
+++ b/drivers/hwmon/ibmpex.c
@@ -56,15 +56,10 @@ static u8 const temp_sensor_sig[] = {0x74, 0x65, 0x6D};
static u8 const watt_sensor_sig[] = {0x41, 0x43};
#define PEX_NUM_SENSOR_FUNCS 3
-static char const * const power_sensor_name_templates[] = {
- "%s%d_average",
- "%s%d_average_lowest",
- "%s%d_average_highest"
-};
-static char const * const temp_sensor_name_templates[] = {
- "%s%d_input",
- "%s%d_input_lowest",
- "%s%d_input_highest"
+static const char * const sensor_name_suffixes[] = {
+ "",
+ "_lowest",
+ "_highest"
};
static void ibmpex_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
@@ -355,9 +350,11 @@ static int create_sensor(struct ibmpex_bmc_data *data, int type,
return -ENOMEM;
if (type == TEMP_SENSOR)
- sprintf(n, temp_sensor_name_templates[func], "temp", counter);
+ sprintf(n, "temp%d_input%s",
+ counter, sensor_name_suffixes[func]);
else if (type == POWER_SENSOR)
- sprintf(n, power_sensor_name_templates[func], "power", counter);
+ sprintf(n, "power%d_average%s",
+ counter, sensor_name_suffixes[func]);
sysfs_attr_init(&data->sensors[sensor].attr[func].dev_attr.attr);
data->sensors[sensor].attr[func].dev_attr.attr.name = n;
diff --git a/drivers/hwmon/ibmpowernv.c b/drivers/hwmon/ibmpowernv.c
index febe8175d36c..4255514b2c72 100644
--- a/drivers/hwmon/ibmpowernv.c
+++ b/drivers/hwmon/ibmpowernv.c
@@ -30,8 +30,11 @@
#include <linux/platform_device.h>
#include <asm/opal.h>
#include <linux/err.h>
+#include <asm/cputhreads.h>
+#include <asm/smp.h>
#define MAX_ATTR_LEN 32
+#define MAX_LABEL_LEN 64
/* Sensor suffix name from DT */
#define DT_FAULT_ATTR_SUFFIX "faulted"
@@ -44,17 +47,20 @@
*/
enum sensors {
FAN,
- AMBIENT_TEMP,
+ TEMP,
POWER_SUPPLY,
POWER_INPUT,
MAX_SENSOR_TYPE,
};
+#define INVALID_INDEX (-1U)
+
static struct sensor_group {
const char *name;
const char *compatible;
struct attribute_group group;
u32 attr_count;
+ u32 hwmon_index;
} sensor_groups[] = {
{"fan", "ibm,opal-sensor-cooling-fan"},
{"temp", "ibm,opal-sensor-amb-temp"},
@@ -64,7 +70,10 @@ static struct sensor_group {
struct sensor_data {
u32 id; /* An opaque id of the firmware for each sensor */
+ u32 hwmon_index;
+ u32 opal_index;
enum sensors type;
+ char label[MAX_LABEL_LEN];
char name[MAX_ATTR_LEN];
struct device_attribute dev_attr;
};
@@ -87,7 +96,7 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
return ret;
/* Convert temperature to milli-degrees */
- if (sdata->type == AMBIENT_TEMP)
+ if (sdata->type == TEMP)
x *= 1000;
/* Convert power to micro-watts */
else if (sdata->type == POWER_INPUT)
@@ -96,8 +105,65 @@ static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
return sprintf(buf, "%u\n", x);
}
-static int get_sensor_index_attr(const char *name, u32 *index,
- char *attr)
+static ssize_t show_label(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_data *sdata = container_of(devattr, struct sensor_data,
+ dev_attr);
+
+ return sprintf(buf, "%s\n", sdata->label);
+}
+
+static int __init get_logical_cpu(int hwcpu)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ if (get_hard_smp_processor_id(cpu) == hwcpu)
+ return cpu;
+
+ return -ENOENT;
+}
+
+static void __init make_sensor_label(struct device_node *np,
+ struct sensor_data *sdata,
+ const char *label)
+{
+ u32 id;
+ size_t n;
+
+ n = snprintf(sdata->label, sizeof(sdata->label), "%s", label);
+
+ /*
+ * Core temp pretty print
+ */
+ if (!of_property_read_u32(np, "ibm,pir", &id)) {
+ int cpuid = get_logical_cpu(id);
+
+ if (cpuid >= 0)
+ /*
+ * The digital thermal sensors are associated
+ * with a core. Let's print out the range of
+ * cpu ids corresponding to the hardware
+ * threads of the core.
+ */
+ n += snprintf(sdata->label + n,
+ sizeof(sdata->label) - n, " %d-%d",
+ cpuid, cpuid + threads_per_core - 1);
+ else
+ n += snprintf(sdata->label + n,
+ sizeof(sdata->label) - n, " phy%d", id);
+ }
+
+ /*
+ * Membuffer pretty print
+ */
+ if (!of_property_read_u32(np, "ibm,chip-id", &id))
+ n += snprintf(sdata->label + n, sizeof(sdata->label) - n,
+ " %d", id & 0xffff);
+}
+
+static int get_sensor_index_attr(const char *name, u32 *index, char *attr)
{
char *hash_pos = strchr(name, '#');
char buf[8] = { 0 };
@@ -127,46 +193,90 @@ static int get_sensor_index_attr(const char *name, u32 *index,
return 0;
}
+static const char *convert_opal_attr_name(enum sensors type,
+ const char *opal_attr)
+{
+ const char *attr_name = NULL;
+
+ if (!strcmp(opal_attr, DT_FAULT_ATTR_SUFFIX)) {
+ attr_name = "fault";
+ } else if (!strcmp(opal_attr, DT_DATA_ATTR_SUFFIX)) {
+ attr_name = "input";
+ } else if (!strcmp(opal_attr, DT_THRESHOLD_ATTR_SUFFIX)) {
+ if (type == TEMP)
+ attr_name = "max";
+ else if (type == FAN)
+ attr_name = "min";
+ }
+
+ return attr_name;
+}
+
/*
* This function translates the DT node name into the 'hwmon' attribute name.
* IBMPOWERNV device node appear like cooling-fan#2-data, amb-temp#1-thrs etc.
* which need to be mapped as fan2_input, temp1_max respectively before
* populating them inside hwmon device class.
*/
-static int create_hwmon_attr_name(struct device *dev, enum sensors type,
- const char *node_name,
- char *hwmon_attr_name)
+static const char *parse_opal_node_name(const char *node_name,
+ enum sensors type, u32 *index)
{
char attr_suffix[MAX_ATTR_LEN];
- char *attr_name;
- u32 index;
+ const char *attr_name;
int err;
- err = get_sensor_index_attr(node_name, &index, attr_suffix);
- if (err) {
- dev_err(dev, "Sensor device node name '%s' is invalid\n",
- node_name);
- return err;
- }
+ err = get_sensor_index_attr(node_name, index, attr_suffix);
+ if (err)
+ return ERR_PTR(err);
- if (!strcmp(attr_suffix, DT_FAULT_ATTR_SUFFIX)) {
- attr_name = "fault";
- } else if (!strcmp(attr_suffix, DT_DATA_ATTR_SUFFIX)) {
- attr_name = "input";
- } else if (!strcmp(attr_suffix, DT_THRESHOLD_ATTR_SUFFIX)) {
- if (type == AMBIENT_TEMP)
- attr_name = "max";
- else if (type == FAN)
- attr_name = "min";
- else
- return -ENOENT;
- } else {
- return -ENOENT;
+ attr_name = convert_opal_attr_name(type, attr_suffix);
+ if (!attr_name)
+ return ERR_PTR(-ENOENT);
+
+ return attr_name;
+}
+
+static int get_sensor_type(struct device_node *np)
+{
+ enum sensors type;
+ const char *str;
+
+ for (type = 0; type < MAX_SENSOR_TYPE; type++) {
+ if (of_device_is_compatible(np, sensor_groups[type].compatible))
+ return type;
}
- snprintf(hwmon_attr_name, MAX_ATTR_LEN, "%s%d_%s",
- sensor_groups[type].name, index, attr_name);
- return 0;
+ /*
+ * Let's check if we have a newer device tree
+ */
+ if (!of_device_is_compatible(np, "ibm,opal-sensor"))
+ return MAX_SENSOR_TYPE;
+
+ if (of_property_read_string(np, "sensor-type", &str))
+ return MAX_SENSOR_TYPE;
+
+ for (type = 0; type < MAX_SENSOR_TYPE; type++)
+ if (!strcmp(str, sensor_groups[type].name))
+ return type;
+
+ return MAX_SENSOR_TYPE;
+}
+
+static u32 get_sensor_hwmon_index(struct sensor_data *sdata,
+ struct sensor_data *sdata_table, int count)
+{
+ int i;
+
+ /*
+ * We don't use the OPAL index on newer device trees
+ */
+ if (sdata->opal_index != INVALID_INDEX) {
+ for (i = 0; i < count; i++)
+ if (sdata_table[i].opal_index == sdata->opal_index &&
+ sdata_table[i].type == sdata->type)
+ return sdata_table[i].hwmon_index;
+ }
+ return ++sensor_groups[sdata->type].hwmon_index;
}
static int populate_attr_groups(struct platform_device *pdev)
@@ -178,15 +288,22 @@ static int populate_attr_groups(struct platform_device *pdev)
opal = of_find_node_by_path("/ibm,opal/sensors");
for_each_child_of_node(opal, np) {
+ const char *label;
+
if (np->name == NULL)
continue;
- for (type = 0; type < MAX_SENSOR_TYPE; type++)
- if (of_device_is_compatible(np,
- sensor_groups[type].compatible)) {
- sensor_groups[type].attr_count++;
- break;
- }
+ type = get_sensor_type(np);
+ if (type == MAX_SENSOR_TYPE)
+ continue;
+
+ sensor_groups[type].attr_count++;
+
+ /*
+ * add a new attribute for labels
+ */
+ if (!of_property_read_string(np, "label", &label))
+ sensor_groups[type].attr_count++;
}
of_node_put(opal);
@@ -207,6 +324,21 @@ static int populate_attr_groups(struct platform_device *pdev)
return 0;
}
+static void create_hwmon_attr(struct sensor_data *sdata, const char *attr_name,
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *attr,
+ char *buf))
+{
+ snprintf(sdata->name, MAX_ATTR_LEN, "%s%d_%s",
+ sensor_groups[sdata->type].name, sdata->hwmon_index,
+ attr_name);
+
+ sysfs_attr_init(&sdata->dev_attr.attr);
+ sdata->dev_attr.attr.name = sdata->name;
+ sdata->dev_attr.attr.mode = S_IRUGO;
+ sdata->dev_attr.show = show;
+}
+
/*
* Iterate through the device tree for each child of 'sensors' node, create
* a sysfs attribute file, the file is named by translating the DT node name
@@ -233,18 +365,23 @@ static int create_device_attrs(struct platform_device *pdev)
}
for_each_child_of_node(opal, np) {
+ const char *attr_name;
+ u32 opal_index;
+ const char *label;
+
if (np->name == NULL)
continue;
- for (type = 0; type < MAX_SENSOR_TYPE; type++)
- if (of_device_is_compatible(np,
- sensor_groups[type].compatible))
- break;
-
+ type = get_sensor_type(np);
if (type == MAX_SENSOR_TYPE)
continue;
- if (of_property_read_u32(np, "sensor-id", &sensor_id)) {
+ /*
+ * Newer device trees use a "sensor-data" property
+ * name for input.
+ */
+ if (of_property_read_u32(np, "sensor-id", &sensor_id) &&
+ of_property_read_u32(np, "sensor-data", &sensor_id)) {
dev_info(&pdev->dev,
"'sensor-id' missing in the node '%s'\n",
np->name);
@@ -253,18 +390,46 @@ static int create_device_attrs(struct platform_device *pdev)
sdata[count].id = sensor_id;
sdata[count].type = type;
- err = create_hwmon_attr_name(&pdev->dev, type, np->name,
- sdata[count].name);
- if (err)
- goto exit_put_node;
- sysfs_attr_init(&sdata[count].dev_attr.attr);
- sdata[count].dev_attr.attr.name = sdata[count].name;
- sdata[count].dev_attr.attr.mode = S_IRUGO;
- sdata[count].dev_attr.show = show_sensor;
+ /*
+ * If we can not parse the node name, it means we are
+ * running on a newer device tree. We can just forget
+ * about the OPAL index and use a defaut value for the
+ * hwmon attribute name
+ */
+ attr_name = parse_opal_node_name(np->name, type, &opal_index);
+ if (IS_ERR(attr_name)) {
+ attr_name = "input";
+ opal_index = INVALID_INDEX;
+ }
+
+ sdata[count].opal_index = opal_index;
+ sdata[count].hwmon_index =
+ get_sensor_hwmon_index(&sdata[count], sdata, count);
+
+ create_hwmon_attr(&sdata[count], attr_name, show_sensor);
pgroups[type]->attrs[sensor_groups[type].attr_count++] =
&sdata[count++].dev_attr.attr;
+
+ if (!of_property_read_string(np, "label", &label)) {
+ /*
+ * For the label attribute, we can reuse the
+ * "properties" of the previous "input"
+ * attribute. They are related to the same
+ * sensor.
+ */
+ sdata[count].type = type;
+ sdata[count].opal_index = sdata[count - 1].opal_index;
+ sdata[count].hwmon_index = sdata[count - 1].hwmon_index;
+
+ make_sensor_label(np, &sdata[count], label);
+
+ create_hwmon_attr(&sdata[count], "label", show_label);
+
+ pgroups[type]->attrs[sensor_groups[type].attr_count++] =
+ &sdata[count++].dev_attr.attr;
+ }
}
exit_put_node:
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 409116c52cc5..d0ee556e8ce0 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -11,6 +11,7 @@
* similar parts. The other devices are supported by different drivers.
*
* Supports: IT8603E Super I/O chip w/LPC interface
+ * IT8620E Super I/O chip w/LPC interface
* IT8623E Super I/O chip w/LPC interface
* IT8705F Super I/O chip w/LPC interface
* IT8712F Super I/O chip w/LPC interface
@@ -23,8 +24,11 @@
* IT8758E Super I/O chip w/LPC interface
* IT8771E Super I/O chip w/LPC interface
* IT8772E Super I/O chip w/LPC interface
+ * IT8781F Super I/O chip w/LPC interface
* IT8782F Super I/O chip w/LPC interface
* IT8783E/F Super I/O chip w/LPC interface
+ * IT8786E Super I/O chip w/LPC interface
+ * IT8790E Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
*
* Copyright (C) 2001 Chris Gauthron
@@ -66,7 +70,7 @@
#define DRVNAME "it87"
enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
- it8772, it8782, it8783, it8603 };
+ it8772, it8781, it8782, it8783, it8786, it8790, it8603, it8620 };
static unsigned short force_id;
module_param(force_id, ushort, 0);
@@ -146,15 +150,20 @@ static inline void superio_exit(void)
#define IT8728F_DEVID 0x8728
#define IT8771E_DEVID 0x8771
#define IT8772E_DEVID 0x8772
+#define IT8781F_DEVID 0x8781
#define IT8782F_DEVID 0x8782
#define IT8783E_DEVID 0x8783
+#define IT8786E_DEVID 0x8786
+#define IT8790E_DEVID 0x8790
#define IT8603E_DEVID 0x8603
+#define IT8620E_DEVID 0x8620
#define IT8623E_DEVID 0x8623
#define IT87_ACT_REG 0x30
#define IT87_BASE_REG 0x60
/* Logical device 7 registers (IT8712F and later) */
#define IT87_SIO_GPIO1_REG 0x25
+#define IT87_SIO_GPIO2_REG 0x26
#define IT87_SIO_GPIO3_REG 0x27
#define IT87_SIO_GPIO5_REG 0x29
#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
@@ -207,11 +216,11 @@ static bool fix_pwm_polarity;
/* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */
-static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
-static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86 };
-static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83 };
-static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
-static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
+static const u8 IT87_REG_FAN[] = { 0x0d, 0x0e, 0x0f, 0x80, 0x82, 0x4c };
+static const u8 IT87_REG_FAN_MIN[] = { 0x10, 0x11, 0x12, 0x84, 0x86, 0x4e };
+static const u8 IT87_REG_FANX[] = { 0x18, 0x19, 0x1a, 0x81, 0x83, 0x4d };
+static const u8 IT87_REG_FANX_MIN[] = { 0x1b, 0x1c, 0x1d, 0x85, 0x87, 0x4f };
+static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
@@ -238,6 +247,7 @@ static const u8 IT87_REG_TEMP_OFFSET[] = { 0x56, 0x57, 0x59 };
struct it87_devices {
const char *name;
+ const char * const suffix;
u16 features;
u8 peci_mask;
u8 old_peci_mask;
@@ -250,79 +260,131 @@ struct it87_devices {
#define FEAT_TEMP_OFFSET (1 << 4)
#define FEAT_TEMP_PECI (1 << 5)
#define FEAT_TEMP_OLD_PECI (1 << 6)
+#define FEAT_FAN16_CONFIG (1 << 7) /* Need to enable 16-bit fans */
+#define FEAT_FIVE_FANS (1 << 8) /* Supports five fans */
+#define FEAT_VID (1 << 9) /* Set if chip supports VID */
+#define FEAT_IN7_INTERNAL (1 << 10) /* Set if in7 is internal */
+#define FEAT_SIX_FANS (1 << 11) /* Supports six fans */
static const struct it87_devices it87_devices[] = {
[it87] = {
.name = "it87",
+ .suffix = "F",
.features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
},
[it8712] = {
.name = "it8712",
- .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
+ .suffix = "F",
+ .features = FEAT_OLD_AUTOPWM | FEAT_VID,
+ /* may need to overwrite */
},
[it8716] = {
.name = "it8716",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET,
+ .suffix = "F",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
},
[it8718] = {
.name = "it8718",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ .suffix = "F",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
.old_peci_mask = 0x4,
},
[it8720] = {
.name = "it8720",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ .suffix = "F",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
.old_peci_mask = 0x4,
},
[it8721] = {
.name = "it8721",
+ .suffix = "F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI,
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS | FEAT_IN7_INTERNAL,
.peci_mask = 0x05,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
[it8728] = {
.name = "it8728",
+ .suffix = "F",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
+ | FEAT_IN7_INTERNAL,
.peci_mask = 0x07,
},
[it8771] = {
.name = "it8771",
+ .suffix = "E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
- /* PECI: guesswork */
- /* 12mV ADC (OHM) */
- /* 16 bit fans (OHM) */
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+ /* PECI: guesswork */
+ /* 12mV ADC (OHM) */
+ /* 16 bit fans (OHM) */
+ /* three fans, always 16 bit (guesswork) */
.peci_mask = 0x07,
},
[it8772] = {
.name = "it8772",
+ .suffix = "E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
- /* PECI (coreboot) */
- /* 12mV ADC (HWSensors4, OHM) */
- /* 16 bit fans (HWSensors4, OHM) */
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+ /* PECI (coreboot) */
+ /* 12mV ADC (HWSensors4, OHM) */
+ /* 16 bit fans (HWSensors4, OHM) */
+ /* three fans, always 16 bit (datasheet) */
.peci_mask = 0x07,
},
+ [it8781] = {
+ .name = "it8781",
+ .suffix = "F",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
+ .old_peci_mask = 0x4,
+ },
[it8782] = {
.name = "it8782",
+ .suffix = "F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
.old_peci_mask = 0x4,
},
[it8783] = {
.name = "it8783",
+ .suffix = "E/F",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
.old_peci_mask = 0x4,
},
+ [it8786] = {
+ .name = "it8786",
+ .suffix = "E",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+ .peci_mask = 0x07,
+ },
+ [it8790] = {
+ .name = "it8790",
+ .suffix = "E",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+ .peci_mask = 0x07,
+ },
[it8603] = {
.name = "it8603",
+ .suffix = "E",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
+ .peci_mask = 0x07,
+ },
+ [it8620] = {
+ .name = "it8620",
+ .suffix = "E",
+ .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_SIX_FANS
+ | FEAT_IN7_INTERNAL,
.peci_mask = 0x07,
},
};
@@ -337,6 +399,12 @@ static const struct it87_devices it87_devices[] = {
#define has_temp_old_peci(data, nr) \
(((data)->features & FEAT_TEMP_OLD_PECI) && \
((data)->old_peci_mask & (1 << nr)))
+#define has_fan16_config(data) ((data)->features & FEAT_FAN16_CONFIG)
+#define has_five_fans(data) ((data)->features & (FEAT_FIVE_FANS | \
+ FEAT_SIX_FANS))
+#define has_vid(data) ((data)->features & FEAT_VID)
+#define has_in7_internal(data) ((data)->features & FEAT_IN7_INTERNAL)
+#define has_six_fans(data) ((data)->features & FEAT_SIX_FANS)
struct it87_sio_data {
enum chips type;
@@ -373,7 +441,7 @@ struct it87_data {
u16 in_scaled; /* Internal voltage sensors are scaled */
u8 in[10][3]; /* [nr][0]=in, [1]=min, [2]=max */
u8 has_fan; /* Bitfield, fans enabled */
- u16 fan[5][2]; /* Register values, [nr][0]=fan, [1]=min */
+ u16 fan[6][2]; /* Register values, [nr][0]=fan, [1]=min */
u8 has_temp; /* Bitfield, temp sensors enabled */
s8 temp[3][4]; /* [nr][0]=temp, [1]=min, [2]=max, [3]=offset */
u8 sensor; /* Register value (IT87_REG_TEMP_ENABLE) */
@@ -475,15 +543,25 @@ static int DIV_TO_REG(int val)
}
#define DIV_FROM_REG(val) (1 << (val))
+/*
+ * PWM base frequencies. The frequency has to be divided by either 128 or 256,
+ * depending on the chip type, to calculate the actual PWM frequency.
+ *
+ * Some of the chip datasheets suggest a base frequency of 51 kHz instead
+ * of 750 kHz for the slowest base frequency, resulting in a PWM frequency
+ * of 200 Hz. Sometimes both PWM frequency select registers are affected,
+ * sometimes just one. It is unknown if this is a datasheet error or real,
+ * so this is ignored for now.
+ */
static const unsigned int pwm_freq[8] = {
- 48000000 / 128,
- 24000000 / 128,
- 12000000 / 128,
- 8000000 / 128,
- 6000000 / 128,
- 3000000 / 128,
- 1500000 / 128,
- 750000 / 128,
+ 48000000,
+ 24000000,
+ 12000000,
+ 8000000,
+ 6000000,
+ 3000000,
+ 1500000,
+ 750000,
};
static int it87_probe(struct platform_device *pdev);
@@ -801,8 +879,11 @@ static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr,
{
struct it87_data *data = it87_update_device(dev);
int index = (data->fan_ctl >> 4) & 0x07;
+ unsigned int freq;
- return sprintf(buf, "%u\n", pwm_freq[index]);
+ freq = pwm_freq[index] / (has_newer_autopwm(data) ? 256 : 128);
+
+ return sprintf(buf, "%u\n", freq);
}
static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
@@ -1024,6 +1105,9 @@ static ssize_t set_pwm_freq(struct device *dev,
if (kstrtoul(buf, 10, &val) < 0)
return -EINVAL;
+ val = clamp_val(val, 0, 1000000);
+ val *= has_newer_autopwm(data) ? 256 : 128;
+
/* Search for the nearest available frequency */
for (i = 0; i < 7; i++) {
if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2)
@@ -1196,6 +1280,10 @@ static SENSOR_DEVICE_ATTR_2(fan5_input, S_IRUGO, show_fan, NULL, 4, 0);
static SENSOR_DEVICE_ATTR_2(fan5_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
4, 1);
+static SENSOR_DEVICE_ATTR_2(fan6_input, S_IRUGO, show_fan, NULL, 5, 0);
+static SENSOR_DEVICE_ATTR_2(fan6_min, S_IRUGO | S_IWUSR, show_fan, set_fan,
+ 5, 1);
+
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
show_pwm_enable, set_pwm_enable, 0);
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, 0);
@@ -1326,6 +1414,7 @@ static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 16);
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 17);
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 18);
@@ -1376,6 +1465,7 @@ static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan4_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(fan5_beep, S_IRUGO, show_beep, set_beep, 0);
+static SENSOR_DEVICE_ATTR(fan6_beep, S_IRUGO, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR,
show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO, show_beep, NULL, 2);
@@ -1579,7 +1669,7 @@ static struct attribute *it87_attributes_temp_beep[] = {
&sensor_dev_attr_temp3_beep.dev_attr.attr,
};
-static struct attribute *it87_attributes_fan[5][3+1] = { {
+static struct attribute *it87_attributes_fan[6][3+1] = { {
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
@@ -1604,14 +1694,20 @@ static struct attribute *it87_attributes_fan[5][3+1] = { {
&sensor_dev_attr_fan5_min.dev_attr.attr,
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
NULL
+}, {
+ &sensor_dev_attr_fan6_input.dev_attr.attr,
+ &sensor_dev_attr_fan6_min.dev_attr.attr,
+ &sensor_dev_attr_fan6_alarm.dev_attr.attr,
+ NULL
} };
-static const struct attribute_group it87_group_fan[5] = {
+static const struct attribute_group it87_group_fan[6] = {
{ .attrs = it87_attributes_fan[0] },
{ .attrs = it87_attributes_fan[1] },
{ .attrs = it87_attributes_fan[2] },
{ .attrs = it87_attributes_fan[3] },
{ .attrs = it87_attributes_fan[4] },
+ { .attrs = it87_attributes_fan[5] },
};
static const struct attribute *it87_attributes_fan_div[] = {
@@ -1693,6 +1789,7 @@ static struct attribute *it87_attributes_fan_beep[] = {
&sensor_dev_attr_fan3_beep.dev_attr.attr,
&sensor_dev_attr_fan4_beep.dev_attr.attr,
&sensor_dev_attr_fan5_beep.dev_attr.attr,
+ &sensor_dev_attr_fan6_beep.dev_attr.attr,
};
static struct attribute *it87_attributes_vid[] = {
@@ -1724,6 +1821,7 @@ static int __init it87_find(unsigned short *address,
int err;
u16 chip_type;
const char *board_vendor, *board_name;
+ const struct it87_devices *config;
err = superio_enter();
if (err)
@@ -1761,16 +1859,28 @@ static int __init it87_find(unsigned short *address,
case IT8772E_DEVID:
sio_data->type = it8772;
break;
+ case IT8781F_DEVID:
+ sio_data->type = it8781;
+ break;
case IT8782F_DEVID:
sio_data->type = it8782;
break;
case IT8783E_DEVID:
sio_data->type = it8783;
break;
+ case IT8786E_DEVID:
+ sio_data->type = it8786;
+ break;
+ case IT8790E_DEVID:
+ sio_data->type = it8790;
+ break;
case IT8603E_DEVID:
case IT8623E_DEVID:
sio_data->type = it8603;
break;
+ case IT8620E_DEVID:
+ sio_data->type = it8620;
+ break;
case 0xffff: /* No device at all */
goto exit;
default:
@@ -1792,30 +1902,34 @@ static int __init it87_find(unsigned short *address,
err = 0;
sio_data->revision = superio_inb(DEVREV) & 0x0f;
- pr_info("Found IT%04x%c chip at 0x%x, revision %d\n", chip_type,
- chip_type == 0x8771 || chip_type == 0x8772 ||
- chip_type == 0x8603 ? 'E' : 'F', *address,
- sio_data->revision);
+ pr_info("Found IT%04x%s chip at 0x%x, revision %d\n", chip_type,
+ it87_devices[sio_data->type].suffix,
+ *address, sio_data->revision);
+
+ config = &it87_devices[sio_data->type];
+
+ /* in7 (VSB or VCCH5V) is always internal on some chips */
+ if (has_in7_internal(config))
+ sio_data->internal |= (1 << 1);
/* in8 (Vbat) is always internal */
- sio_data->internal = (1 << 2);
+ sio_data->internal |= (1 << 2);
+
/* Only the IT8603E has in9 */
if (sio_data->type != it8603)
sio_data->skip_in |= (1 << 9);
- /* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (sio_data->type == it87) {
- /* The IT8705F doesn't have VID pins at all */
+ if (!has_vid(config))
sio_data->skip_vid = 1;
+ /* Read GPIO config and VID value from LDN 7 (GPIO) */
+ if (sio_data->type == it87) {
/* The IT8705F has a different LD number for GPIO */
superio_select(5);
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8783) {
int reg25, reg27, reg2a, reg2c, regef;
- sio_data->skip_vid = 1; /* No VID */
-
superio_select(GPIO);
reg25 = superio_inb(IT87_SIO_GPIO1_REG);
@@ -1881,7 +1995,6 @@ static int __init it87_find(unsigned short *address,
} else if (sio_data->type == it8603) {
int reg27, reg29;
- sio_data->skip_vid = 1; /* No VID */
superio_select(GPIO);
reg27 = superio_inb(IT87_SIO_GPIO3_REG);
@@ -1902,14 +2015,36 @@ static int __init it87_find(unsigned short *address,
sio_data->skip_in |= (1 << 5); /* No VIN5 */
sio_data->skip_in |= (1 << 6); /* No VIN6 */
- /* no fan4 */
- sio_data->skip_pwm |= (1 << 3);
- sio_data->skip_fan |= (1 << 3);
-
- sio_data->internal |= (1 << 1); /* in7 is VSB */
sio_data->internal |= (1 << 3); /* in9 is AVCC */
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
+ } else if (sio_data->type == it8620) {
+ int reg;
+
+ superio_select(GPIO);
+
+ /* Check for fan4, fan5 */
+ reg = superio_inb(IT87_SIO_GPIO2_REG);
+ if (!(reg & (1 << 5)))
+ sio_data->skip_fan |= (1 << 3);
+ if (!(reg & (1 << 4)))
+ sio_data->skip_fan |= (1 << 4);
+
+ /* Check for pwm3, fan3 */
+ reg = superio_inb(IT87_SIO_GPIO3_REG);
+ if (reg & (1 << 6))
+ sio_data->skip_pwm |= (1 << 2);
+ if (reg & (1 << 7))
+ sio_data->skip_fan |= (1 << 2);
+
+ /* Check for pwm2, fan2 */
+ reg = superio_inb(IT87_SIO_GPIO5_REG);
+ if (reg & (1 << 1))
+ sio_data->skip_pwm |= (1 << 1);
+ if (reg & (1 << 2))
+ sio_data->skip_fan |= (1 << 1);
+
+ sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else {
int reg;
bool uart6;
@@ -1917,15 +2052,7 @@ static int __init it87_find(unsigned short *address,
superio_select(GPIO);
reg = superio_inb(IT87_SIO_GPIO3_REG);
- if (sio_data->type == it8721 || sio_data->type == it8728 ||
- sio_data->type == it8771 || sio_data->type == it8772 ||
- sio_data->type == it8782) {
- /*
- * IT8721F/IT8758E, and IT8782F don't have VID pins
- * at all, not sure about the IT8728F and compatibles.
- */
- sio_data->skip_vid = 1;
- } else {
+ if (!sio_data->skip_vid) {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
pr_info("VID is disabled (pins used for GPIO)\n");
@@ -1975,10 +2102,7 @@ static int __init it87_find(unsigned short *address,
}
if (reg & (1 << 0))
sio_data->internal |= (1 << 0);
- if ((reg & (1 << 1)) || sio_data->type == it8721 ||
- sio_data->type == it8728 ||
- sio_data->type == it8771 ||
- sio_data->type == it8772)
+ if (reg & (1 << 1))
sio_data->internal |= (1 << 1);
/*
@@ -2050,7 +2174,7 @@ static void it87_remove_files(struct device *dev)
sysfs_remove_file(&dev->kobj,
it87_attributes_temp_beep[i]);
}
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 6; i++) {
if (!(data->has_fan & (1 << i)))
continue;
sysfs_remove_group(&dev->kobj, &it87_group_fan[i]);
@@ -2062,7 +2186,7 @@ static void it87_remove_files(struct device *dev)
it87_attributes_fan_div[i]);
}
for (i = 0; i < 3; i++) {
- if (sio_data->skip_pwm & (1 << 0))
+ if (sio_data->skip_pwm & (1 << i))
continue;
sysfs_remove_group(&dev->kobj, &it87_group_pwm[i]);
if (has_old_autopwm(data))
@@ -2112,13 +2236,14 @@ static int it87_probe(struct platform_device *pdev)
case it87:
if (sio_data->revision >= 0x03) {
data->features &= ~FEAT_OLD_AUTOPWM;
- data->features |= FEAT_16BIT_FANS;
+ data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS;
}
break;
case it8712:
if (sio_data->revision >= 0x08) {
data->features &= ~FEAT_OLD_AUTOPWM;
- data->features |= FEAT_16BIT_FANS;
+ data->features |= FEAT_FAN16_CONFIG | FEAT_16BIT_FANS |
+ FEAT_FIVE_FANS;
}
break;
default:
@@ -2147,7 +2272,8 @@ static int it87_probe(struct platform_device *pdev)
data->in_scaled |= (1 << 8); /* in8 is Vbat */
if (sio_data->internal & (1 << 3))
data->in_scaled |= (1 << 9); /* in9 is AVCC */
- } else if (sio_data->type == it8782 || sio_data->type == it8783) {
+ } else if (sio_data->type == it8781 || sio_data->type == it8782 ||
+ sio_data->type == it8783) {
if (sio_data->internal & (1 << 0))
data->in_scaled |= (1 << 3); /* in3 is VCC5V */
if (sio_data->internal & (1 << 1))
@@ -2205,7 +2331,7 @@ static int it87_probe(struct platform_device *pdev)
/* Do not create fan files for disabled fans */
fan_beep_need_rw = 1;
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 6; i++) {
if (!(data->has_fan & (1 << i)))
continue;
err = sysfs_create_group(&dev->kobj, &it87_group_fan[i]);
@@ -2450,24 +2576,26 @@ static void it87_init_device(struct platform_device *pdev)
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
- /* Set tachometers to 16-bit mode if needed, IT8603E (and IT8728F?)
- * has it by default */
- if (has_16bit_fans(data) && data->type != it8603) {
- tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+
+ /* Set tachometers to 16-bit mode if needed */
+ if (has_fan16_config(data)) {
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
"Setting fan1-3 to 16-bit mode\n");
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
- /* IT8705F, IT8782F, and IT8783E/F only support three fans. */
- if (data->type != it87 && data->type != it8782 &&
- data->type != it8783) {
- if (tmp & (1 << 4))
- data->has_fan |= (1 << 3); /* fan4 enabled */
- if (tmp & (1 << 5))
- data->has_fan |= (1 << 4); /* fan5 enabled */
- }
+ }
+
+ /* Check for additional fans */
+ if (has_five_fans(data)) {
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
+ if (has_six_fans(data) && (tmp & (1 << 2)))
+ data->has_fan |= (1 << 5); /* fan6 enabled */
}
/* Fan input pins may be used for alternative functions */
@@ -2535,7 +2663,7 @@ static struct it87_data *it87_update_device(struct device *dev)
if (data->type == it8603)
data->in[9][0] = it87_read_value(data, 0x2f);
- for (i = 0; i < 5; i++) {
+ for (i = 0; i < 6; i++) {
/* Skip disabled fans */
if (!(data->has_fan & (1 << i)))
continue;
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 996bdfd5cf25..9887d3224a86 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -87,11 +87,14 @@ static const unsigned short normal_i2c[] = {
#define AT30TSE004_DEVID_MASK 0xffff
/* IDT */
-#define TS3000B3_DEVID 0x2903 /* Also matches TSE2002B3 */
-#define TS3000B3_DEVID_MASK 0xffff
+#define TSE2004_DEVID 0x2200
+#define TSE2004_DEVID_MASK 0xff00
-#define TS3000GB2_DEVID 0x2912 /* Also matches TSE2002GB2 */
-#define TS3000GB2_DEVID_MASK 0xffff
+#define TS3000_DEVID 0x2900 /* Also matches TSE2002 */
+#define TS3000_DEVID_MASK 0xff00
+
+#define TS3001_DEVID 0x3000
+#define TS3001_DEVID_MASK 0xff00
/* Maxim */
#define MAX6604_DEVID 0x3e00
@@ -152,8 +155,9 @@ static struct jc42_chips jc42_chips[] = {
{ ADT_MANID, ADT7408_DEVID, ADT7408_DEVID_MASK },
{ ATMEL_MANID, AT30TS00_DEVID, AT30TS00_DEVID_MASK },
{ ATMEL_MANID2, AT30TSE004_DEVID, AT30TSE004_DEVID_MASK },
- { IDT_MANID, TS3000B3_DEVID, TS3000B3_DEVID_MASK },
- { IDT_MANID, TS3000GB2_DEVID, TS3000GB2_DEVID_MASK },
+ { IDT_MANID, TSE2004_DEVID, TSE2004_DEVID_MASK },
+ { IDT_MANID, TS3000_DEVID, TS3000_DEVID_MASK },
+ { IDT_MANID, TS3001_DEVID, TS3001_DEVID_MASK },
{ MAX_MANID, MAX6604_DEVID, MAX6604_DEVID_MASK },
{ MCP_MANID, MCP9804_DEVID, MCP9804_DEVID_MASK },
{ MCP_MANID, MCP98242_DEVID, MCP98242_DEVID_MASK },
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 1be41177b620..4fcb48103299 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -57,6 +57,7 @@
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/acpi.h>
+#include <linux/dmi.h>
#include <linux/io.h>
#include "lm75.h"
@@ -880,12 +881,12 @@ struct nct6775_data {
u16 have_temp;
u16 have_temp_fixed;
u16 have_in;
-#ifdef CONFIG_PM
+
/* Remember extra register values over suspend/resume */
u8 vbat;
u8 fandiv1;
u8 fandiv2;
-#endif
+ u8 sio_reg_enable;
};
struct nct6775_sio_data {
@@ -3178,6 +3179,10 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
int sioreg = data->sioreg;
int regval;
+ /* Store SIO_REG_ENABLE for use during resume */
+ superio_select(sioreg, NCT6775_LD_HWM);
+ data->sio_reg_enable = superio_inb(sioreg, SIO_REG_ENABLE);
+
/* fan4 and fan5 share some pins with the GPIO and serial flash */
if (data->kind == nct6775) {
regval = superio_inb(sioreg, 0x2c);
@@ -3195,21 +3200,38 @@ nct6775_check_fan_inputs(struct nct6775_data *data)
pwm6pin = false;
} else if (data->kind == nct6776) {
bool gpok = superio_inb(sioreg, 0x27) & 0x80;
+ const char *board_vendor, *board_name;
- superio_select(sioreg, NCT6775_LD_HWM);
- regval = superio_inb(sioreg, SIO_REG_ENABLE);
+ board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
+ board_name = dmi_get_system_info(DMI_BOARD_NAME);
+
+ if (board_name && board_vendor &&
+ !strcmp(board_vendor, "ASRock")) {
+ /*
+ * Auxiliary fan monitoring is not enabled on ASRock
+ * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
+ * Observed with BIOS version 2.00.
+ */
+ if (!strcmp(board_name, "Z77 Pro4-M")) {
+ if ((data->sio_reg_enable & 0xe0) != 0xe0) {
+ data->sio_reg_enable |= 0xe0;
+ superio_outb(sioreg, SIO_REG_ENABLE,
+ data->sio_reg_enable);
+ }
+ }
+ }
- if (regval & 0x80)
+ if (data->sio_reg_enable & 0x80)
fan3pin = gpok;
else
fan3pin = !(superio_inb(sioreg, 0x24) & 0x40);
- if (regval & 0x40)
+ if (data->sio_reg_enable & 0x40)
fan4pin = gpok;
else
fan4pin = superio_inb(sioreg, 0x1C) & 0x01;
- if (regval & 0x20)
+ if (data->sio_reg_enable & 0x20)
fan5pin = gpok;
else
fan5pin = superio_inb(sioreg, 0x1C) & 0x02;
@@ -3989,8 +4011,7 @@ static void nct6791_enable_io_mapping(int sioaddr)
}
}
-#ifdef CONFIG_PM
-static int nct6775_suspend(struct device *dev)
+static int __maybe_unused nct6775_suspend(struct device *dev)
{
struct nct6775_data *data = nct6775_update_device(dev);
@@ -4005,22 +4026,29 @@ static int nct6775_suspend(struct device *dev)
return 0;
}
-static int nct6775_resume(struct device *dev)
+static int __maybe_unused nct6775_resume(struct device *dev)
{
struct nct6775_data *data = dev_get_drvdata(dev);
+ int sioreg = data->sioreg;
int i, j, err = 0;
+ u8 reg;
mutex_lock(&data->update_lock);
data->bank = 0xff; /* Force initial bank selection */
- if (data->kind == nct6791 || data->kind == nct6792) {
- err = superio_enter(data->sioreg);
- if (err)
- goto abort;
+ err = superio_enter(sioreg);
+ if (err)
+ goto abort;
- nct6791_enable_io_mapping(data->sioreg);
- superio_exit(data->sioreg);
- }
+ superio_select(sioreg, NCT6775_LD_HWM);
+ reg = superio_inb(sioreg, SIO_REG_ENABLE);
+ if (reg != data->sio_reg_enable)
+ superio_outb(sioreg, SIO_REG_ENABLE, data->sio_reg_enable);
+
+ if (data->kind == nct6791 || data->kind == nct6792)
+ nct6791_enable_io_mapping(sioreg);
+
+ superio_exit(sioreg);
/* Restore limits */
for (i = 0; i < data->in_num; i++) {
@@ -4066,22 +4094,12 @@ abort:
return err;
}
-static const struct dev_pm_ops nct6775_dev_pm_ops = {
- .suspend = nct6775_suspend,
- .resume = nct6775_resume,
- .freeze = nct6775_suspend,
- .restore = nct6775_resume,
-};
-
-#define NCT6775_DEV_PM_OPS (&nct6775_dev_pm_ops)
-#else
-#define NCT6775_DEV_PM_OPS NULL
-#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
static struct platform_driver nct6775_driver = {
.driver = {
.name = DRVNAME,
- .pm = NCT6775_DEV_PM_OPS,
+ .pm = &nct6775_dev_pm_ops,
},
.probe = nct6775_probe,
};
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
new file mode 100644
index 000000000000..b77b82f24480
--- /dev/null
+++ b/drivers/hwmon/nct7904.c
@@ -0,0 +1,593 @@
+/*
+ * nct7904.c - driver for Nuvoton NCT7904D.
+ *
+ * Copyright (c) 2015 Kontron
+ * Author: Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#define VENDOR_ID_REG 0x7A /* Any bank */
+#define NUVOTON_ID 0x50
+#define CHIP_ID_REG 0x7B /* Any bank */
+#define NCT7904_ID 0xC5
+#define DEVICE_ID_REG 0x7C /* Any bank */
+
+#define BANK_SEL_REG 0xFF
+#define BANK_0 0x00
+#define BANK_1 0x01
+#define BANK_2 0x02
+#define BANK_3 0x03
+#define BANK_4 0x04
+#define BANK_MAX 0x04
+
+#define FANIN_MAX 12 /* Counted from 1 */
+#define VSEN_MAX 21 /* VSEN1..14, 3VDD, VBAT, V3VSB,
+ LTD (not a voltage), VSEN17..19 */
+#define FANCTL_MAX 4 /* Counted from 1 */
+#define TCPU_MAX 8 /* Counted from 1 */
+#define TEMP_MAX 4 /* Counted from 1 */
+
+#define VT_ADC_CTRL0_REG 0x20 /* Bank 0 */
+#define VT_ADC_CTRL1_REG 0x21 /* Bank 0 */
+#define VT_ADC_CTRL2_REG 0x22 /* Bank 0 */
+#define FANIN_CTRL0_REG 0x24
+#define FANIN_CTRL1_REG 0x25
+#define DTS_T_CTRL0_REG 0x26
+#define DTS_T_CTRL1_REG 0x27
+#define VT_ADC_MD_REG 0x2E
+
+#define VSEN1_HV_REG 0x40 /* Bank 0; 2 regs (HV/LV) per sensor */
+#define TEMP_CH1_HV_REG 0x42 /* Bank 0; same as VSEN2_HV */
+#define LTD_HV_REG 0x62 /* Bank 0; 2 regs in VSEN range */
+#define FANIN1_HV_REG 0x80 /* Bank 0; 2 regs (HV/LV) per sensor */
+#define T_CPU1_HV_REG 0xA0 /* Bank 0; 2 regs (HV/LV) per sensor */
+
+#define PRTS_REG 0x03 /* Bank 2 */
+#define FANCTL1_FMR_REG 0x00 /* Bank 3; 1 reg per channel */
+#define FANCTL1_OUT_REG 0x10 /* Bank 3; 1 reg per channel */
+
+static const unsigned short normal_i2c[] = {
+ 0x2d, 0x2e, I2C_CLIENT_END
+};
+
+struct nct7904_data {
+ struct i2c_client *client;
+ struct mutex bank_lock;
+ int bank_sel;
+ u32 fanin_mask;
+ u32 vsen_mask;
+ u32 tcpu_mask;
+ u8 fan_mode[FANCTL_MAX];
+};
+
+/* Access functions */
+static int nct7904_bank_lock(struct nct7904_data *data, unsigned bank)
+{
+ int ret;
+
+ mutex_lock(&data->bank_lock);
+ if (data->bank_sel == bank)
+ return 0;
+ ret = i2c_smbus_write_byte_data(data->client, BANK_SEL_REG, bank);
+ if (ret == 0)
+ data->bank_sel = bank;
+ else
+ data->bank_sel = -1;
+ return ret;
+}
+
+static inline void nct7904_bank_release(struct nct7904_data *data)
+{
+ mutex_unlock(&data->bank_lock);
+}
+
+/* Read 1-byte register. Returns unsigned reg or -ERRNO on error. */
+static int nct7904_read_reg(struct nct7904_data *data,
+ unsigned bank, unsigned reg)
+{
+ struct i2c_client *client = data->client;
+ int ret;
+
+ ret = nct7904_bank_lock(data, bank);
+ if (ret == 0)
+ ret = i2c_smbus_read_byte_data(client, reg);
+
+ nct7904_bank_release(data);
+ return ret;
+}
+
+/*
+ * Read 2-byte register. Returns register in big-endian format or
+ * -ERRNO on error.
+ */
+static int nct7904_read_reg16(struct nct7904_data *data,
+ unsigned bank, unsigned reg)
+{
+ struct i2c_client *client = data->client;
+ int ret, hi;
+
+ ret = nct7904_bank_lock(data, bank);
+ if (ret == 0) {
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret >= 0) {
+ hi = ret;
+ ret = i2c_smbus_read_byte_data(client, reg + 1);
+ if (ret >= 0)
+ ret |= hi << 8;
+ }
+ }
+
+ nct7904_bank_release(data);
+ return ret;
+}
+
+/* Write 1-byte register. Returns 0 or -ERRNO on error. */
+static int nct7904_write_reg(struct nct7904_data *data,
+ unsigned bank, unsigned reg, u8 val)
+{
+ struct i2c_client *client = data->client;
+ int ret;
+
+ ret = nct7904_bank_lock(data, bank);
+ if (ret == 0)
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ nct7904_bank_release(data);
+ return ret;
+}
+
+/* FANIN ATTR */
+static ssize_t show_fan(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int ret;
+ unsigned cnt, rpm;
+
+ ret = nct7904_read_reg16(data, BANK_0, FANIN1_HV_REG + index * 2);
+ if (ret < 0)
+ return ret;
+ cnt = ((ret & 0xff00) >> 3) | (ret & 0x1f);
+ if (cnt == 0x1fff)
+ rpm = 0;
+ else
+ rpm = 1350000 / cnt;
+ return sprintf(buf, "%u\n", rpm);
+}
+
+static umode_t nct7904_fanin_is_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7904_data *data = dev_get_drvdata(dev);
+
+ if (data->fanin_mask & (1 << n))
+ return a->mode;
+ return 0;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7);
+static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, show_fan, NULL, 8);
+static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, show_fan, NULL, 9);
+static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, show_fan, NULL, 10);
+static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, show_fan, NULL, 11);
+
+static struct attribute *nct7904_fanin_attrs[] = {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan5_input.dev_attr.attr,
+ &sensor_dev_attr_fan6_input.dev_attr.attr,
+ &sensor_dev_attr_fan7_input.dev_attr.attr,
+ &sensor_dev_attr_fan8_input.dev_attr.attr,
+ &sensor_dev_attr_fan9_input.dev_attr.attr,
+ &sensor_dev_attr_fan10_input.dev_attr.attr,
+ &sensor_dev_attr_fan11_input.dev_attr.attr,
+ &sensor_dev_attr_fan12_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group nct7904_fanin_group = {
+ .attrs = nct7904_fanin_attrs,
+ .is_visible = nct7904_fanin_is_visible,
+};
+
+/* VSEN ATTR */
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int ret;
+ int volt;
+
+ ret = nct7904_read_reg16(data, BANK_0, VSEN1_HV_REG + index * 2);
+ if (ret < 0)
+ return ret;
+ volt = ((ret & 0xff00) >> 5) | (ret & 0x7);
+ if (index < 14)
+ volt *= 2; /* 0.002V scale */
+ else
+ volt *= 6; /* 0.006V scale */
+
+ return sprintf(buf, "%d\n", volt);
+}
+
+static ssize_t show_ltemp(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int ret;
+ int temp;
+
+ ret = nct7904_read_reg16(data, BANK_0, LTD_HV_REG);
+ if (ret < 0)
+ return ret;
+ temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
+ temp = sign_extend32(temp, 10) * 125;
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+static umode_t nct7904_vsen_is_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7904_data *data = dev_get_drvdata(dev);
+
+ if (data->vsen_mask & (1 << n))
+ return a->mode;
+ return 0;
+}
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3);
+static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4);
+static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5);
+static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6);
+static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9);
+static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10);
+static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11);
+static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12);
+static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_voltage, NULL, 13);
+/*
+ * Next 3 voltage sensors have specific names in the Nuvoton doc
+ * (3VDD, VBAT, 3VSB) but we use vacant numbers for them.
+ */
+static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_voltage, NULL, 14);
+static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_voltage, NULL, 15);
+static SENSOR_DEVICE_ATTR(in20_input, S_IRUGO, show_voltage, NULL, 16);
+/* This is not a voltage, but a local temperature sensor. */
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_ltemp, NULL, 0);
+static SENSOR_DEVICE_ATTR(in17_input, S_IRUGO, show_voltage, NULL, 18);
+static SENSOR_DEVICE_ATTR(in18_input, S_IRUGO, show_voltage, NULL, 19);
+static SENSOR_DEVICE_ATTR(in19_input, S_IRUGO, show_voltage, NULL, 20);
+
+static struct attribute *nct7904_vsen_attrs[] = {
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in9_input.dev_attr.attr,
+ &sensor_dev_attr_in10_input.dev_attr.attr,
+ &sensor_dev_attr_in11_input.dev_attr.attr,
+ &sensor_dev_attr_in12_input.dev_attr.attr,
+ &sensor_dev_attr_in13_input.dev_attr.attr,
+ &sensor_dev_attr_in14_input.dev_attr.attr,
+ &sensor_dev_attr_in15_input.dev_attr.attr,
+ &sensor_dev_attr_in16_input.dev_attr.attr,
+ &sensor_dev_attr_in20_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_in17_input.dev_attr.attr,
+ &sensor_dev_attr_in18_input.dev_attr.attr,
+ &sensor_dev_attr_in19_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group nct7904_vsen_group = {
+ .attrs = nct7904_vsen_attrs,
+ .is_visible = nct7904_vsen_is_visible,
+};
+
+/* CPU_TEMP ATTR */
+static ssize_t show_tcpu(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int ret;
+ int temp;
+
+ ret = nct7904_read_reg16(data, BANK_0, T_CPU1_HV_REG + index * 2);
+ if (ret < 0)
+ return ret;
+
+ temp = ((ret & 0xff00) >> 5) | (ret & 0x7);
+ temp = sign_extend32(temp, 10) * 125;
+ return sprintf(buf, "%d\n", temp);
+}
+
+static umode_t nct7904_tcpu_is_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7904_data *data = dev_get_drvdata(dev);
+
+ if (data->tcpu_mask & (1 << n))
+ return a->mode;
+ return 0;
+}
+
+/* "temp1_input" reserved for local temp */
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_tcpu, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_tcpu, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_tcpu, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_tcpu, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_tcpu, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_tcpu, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_tcpu, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_tcpu, NULL, 7);
+
+static struct attribute *nct7904_tcpu_attrs[] = {
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp7_input.dev_attr.attr,
+ &sensor_dev_attr_temp8_input.dev_attr.attr,
+ &sensor_dev_attr_temp9_input.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group nct7904_tcpu_group = {
+ .attrs = nct7904_tcpu_attrs,
+ .is_visible = nct7904_tcpu_is_visible,
+};
+
+/* PWM ATTR */
+static ssize_t store_pwm(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val > 255)
+ return -EINVAL;
+
+ ret = nct7904_write_reg(data, BANK_3, FANCTL1_OUT_REG + index, val);
+
+ return ret ? ret : count;
+}
+
+static ssize_t show_pwm(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int val;
+
+ val = nct7904_read_reg(data, BANK_3, FANCTL1_OUT_REG + index);
+ if (val < 0)
+ return val;
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t store_mode(struct device *dev, struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ if (kstrtoul(buf, 10, &val) < 0)
+ return -EINVAL;
+ if (val > 1 || (val && !data->fan_mode[index]))
+ return -EINVAL;
+
+ ret = nct7904_write_reg(data, BANK_3, FANCTL1_FMR_REG + index,
+ val ? data->fan_mode[index] : 0);
+
+ return ret ? ret : count;
+}
+
+/* Return 0 for manual mode or 1 for SmartFan mode */
+static ssize_t show_mode(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ int index = to_sensor_dev_attr(devattr)->index;
+ struct nct7904_data *data = dev_get_drvdata(dev);
+ int val;
+
+ val = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + index);
+ if (val < 0)
+ return val;
+
+ return sprintf(buf, "%d\n", val ? 1 : 0);
+}
+
+/* 2 attributes per channel: pwm and mode */
+static SENSOR_DEVICE_ATTR(fan1_pwm, S_IRUGO | S_IWUSR,
+ show_pwm, store_pwm, 0);
+static SENSOR_DEVICE_ATTR(fan1_mode, S_IRUGO | S_IWUSR,
+ show_mode, store_mode, 0);
+static SENSOR_DEVICE_ATTR(fan2_pwm, S_IRUGO | S_IWUSR,
+ show_pwm, store_pwm, 1);
+static SENSOR_DEVICE_ATTR(fan2_mode, S_IRUGO | S_IWUSR,
+ show_mode, store_mode, 1);
+static SENSOR_DEVICE_ATTR(fan3_pwm, S_IRUGO | S_IWUSR,
+ show_pwm, store_pwm, 2);
+static SENSOR_DEVICE_ATTR(fan3_mode, S_IRUGO | S_IWUSR,
+ show_mode, store_mode, 2);
+static SENSOR_DEVICE_ATTR(fan4_pwm, S_IRUGO | S_IWUSR,
+ show_pwm, store_pwm, 3);
+static SENSOR_DEVICE_ATTR(fan4_mode, S_IRUGO | S_IWUSR,
+ show_mode, store_mode, 3);
+
+static struct attribute *nct7904_fanctl_attrs[] = {
+ &sensor_dev_attr_fan1_pwm.dev_attr.attr,
+ &sensor_dev_attr_fan1_mode.dev_attr.attr,
+ &sensor_dev_attr_fan2_pwm.dev_attr.attr,
+ &sensor_dev_attr_fan2_mode.dev_attr.attr,
+ &sensor_dev_attr_fan3_pwm.dev_attr.attr,
+ &sensor_dev_attr_fan3_mode.dev_attr.attr,
+ &sensor_dev_attr_fan4_pwm.dev_attr.attr,
+ &sensor_dev_attr_fan4_mode.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group nct7904_fanctl_group = {
+ .attrs = nct7904_fanctl_attrs,
+};
+
+static const struct attribute_group *nct7904_groups[] = {
+ &nct7904_fanin_group,
+ &nct7904_vsen_group,
+ &nct7904_tcpu_group,
+ &nct7904_fanctl_group,
+ NULL
+};
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int nct7904_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ struct i2c_adapter *adapter = client->adapter;
+
+ if (!i2c_check_functionality(adapter,
+ I2C_FUNC_SMBUS_READ_BYTE |
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -ENODEV;
+
+ /* Determine the chip type. */
+ if (i2c_smbus_read_byte_data(client, VENDOR_ID_REG) != NUVOTON_ID ||
+ i2c_smbus_read_byte_data(client, CHIP_ID_REG) != NCT7904_ID ||
+ (i2c_smbus_read_byte_data(client, DEVICE_ID_REG) & 0xf0) != 0x50 ||
+ (i2c_smbus_read_byte_data(client, BANK_SEL_REG) & 0xf8) != 0x00)
+ return -ENODEV;
+
+ strlcpy(info->type, "nct7904", I2C_NAME_SIZE);
+
+ return 0;
+}
+
+static int nct7904_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct nct7904_data *data;
+ struct device *hwmon_dev;
+ struct device *dev = &client->dev;
+ int ret, i;
+ u32 mask;
+
+ data = devm_kzalloc(dev, sizeof(struct nct7904_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->client = client;
+ mutex_init(&data->bank_lock);
+ data->bank_sel = -1;
+
+ /* Setup sensor groups. */
+ /* FANIN attributes */
+ ret = nct7904_read_reg16(data, BANK_0, FANIN_CTRL0_REG);
+ if (ret < 0)
+ return ret;
+ data->fanin_mask = (ret >> 8) | ((ret & 0xff) << 8);
+
+ /*
+ * VSEN attributes
+ *
+ * Note: voltage sensors overlap with external temperature
+ * sensors. So, if we ever decide to support the latter
+ * we will have to adjust 'vsen_mask' accordingly.
+ */
+ mask = 0;
+ ret = nct7904_read_reg16(data, BANK_0, VT_ADC_CTRL0_REG);
+ if (ret >= 0)
+ mask = (ret >> 8) | ((ret & 0xff) << 8);
+ ret = nct7904_read_reg(data, BANK_0, VT_ADC_CTRL2_REG);
+ if (ret >= 0)
+ mask |= (ret << 16);
+ data->vsen_mask = mask;
+
+ /* CPU_TEMP attributes */
+ ret = nct7904_read_reg16(data, BANK_0, DTS_T_CTRL0_REG);
+ if (ret < 0)
+ return ret;
+ data->tcpu_mask = ((ret >> 8) & 0xf) | ((ret & 0xf) << 4);
+
+ for (i = 0; i < FANCTL_MAX; i++) {
+ ret = nct7904_read_reg(data, BANK_3, FANCTL1_FMR_REG + i);
+ if (ret < 0)
+ return ret;
+ data->fan_mode[i] = ret;
+ }
+
+ hwmon_dev =
+ devm_hwmon_device_register_with_groups(dev, client->name, data,
+ nct7904_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id nct7904_id[] = {
+ {"nct7904", 0},
+ {}
+};
+
+static struct i2c_driver nct7904_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "nct7904",
+ },
+ .probe = nct7904_probe,
+ .id_table = nct7904_id,
+ .detect = nct7904_detect,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(nct7904_driver);
+
+MODULE_AUTHOR("Vadim V. Vlasov <vvlasov@dev.rtsoft.ru>");
+MODULE_DESCRIPTION("Hwmon driver for NUVOTON NCT7904");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
index 1991d9032c38..2d9a712699ff 100644
--- a/drivers/hwmon/pwm-fan.c
+++ b/drivers/hwmon/pwm-fan.c
@@ -24,55 +24,78 @@
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/sysfs.h>
+#include <linux/thermal.h>
#define MAX_PWM 255
struct pwm_fan_ctx {
struct mutex lock;
struct pwm_device *pwm;
- unsigned char pwm_value;
+ unsigned int pwm_value;
+ unsigned int pwm_fan_state;
+ unsigned int pwm_fan_max_state;
+ unsigned int *pwm_fan_cooling_levels;
+ struct thermal_cooling_device *cdev;
};
-static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static int __set_pwm(struct pwm_fan_ctx *ctx, unsigned long pwm)
{
- struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
- unsigned long pwm, duty;
- ssize_t ret;
-
- if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM)
- return -EINVAL;
+ unsigned long duty;
+ int ret = 0;
mutex_lock(&ctx->lock);
-
if (ctx->pwm_value == pwm)
- goto exit_set_pwm_no_change;
-
- if (pwm == 0) {
- pwm_disable(ctx->pwm);
- goto exit_set_pwm;
- }
+ goto exit_set_pwm_err;
duty = DIV_ROUND_UP(pwm * (ctx->pwm->period - 1), MAX_PWM);
ret = pwm_config(ctx->pwm, duty, ctx->pwm->period);
if (ret)
goto exit_set_pwm_err;
+ if (pwm == 0)
+ pwm_disable(ctx->pwm);
+
if (ctx->pwm_value == 0) {
ret = pwm_enable(ctx->pwm);
if (ret)
goto exit_set_pwm_err;
}
-exit_set_pwm:
ctx->pwm_value = pwm;
-exit_set_pwm_no_change:
- ret = count;
exit_set_pwm_err:
mutex_unlock(&ctx->lock);
return ret;
}
+static void pwm_fan_update_state(struct pwm_fan_ctx *ctx, unsigned long pwm)
+{
+ int i;
+
+ for (i = 0; i < ctx->pwm_fan_max_state; ++i)
+ if (pwm < ctx->pwm_fan_cooling_levels[i + 1])
+ break;
+
+ ctx->pwm_fan_state = i;
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+ unsigned long pwm;
+ int ret;
+
+ if (kstrtoul(buf, 10, &pwm) || pwm > MAX_PWM)
+ return -EINVAL;
+
+ ret = __set_pwm(ctx, pwm);
+ if (ret)
+ return ret;
+
+ pwm_fan_update_state(ctx, pwm);
+ return count;
+}
+
static ssize_t show_pwm(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -91,10 +114,108 @@ static struct attribute *pwm_fan_attrs[] = {
ATTRIBUTE_GROUPS(pwm_fan);
+/* thermal cooling device callbacks */
+static int pwm_fan_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct pwm_fan_ctx *ctx = cdev->devdata;
+
+ if (!ctx)
+ return -EINVAL;
+
+ *state = ctx->pwm_fan_max_state;
+
+ return 0;
+}
+
+static int pwm_fan_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct pwm_fan_ctx *ctx = cdev->devdata;
+
+ if (!ctx)
+ return -EINVAL;
+
+ *state = ctx->pwm_fan_state;
+
+ return 0;
+}
+
+static int
+pwm_fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+ struct pwm_fan_ctx *ctx = cdev->devdata;
+ int ret;
+
+ if (!ctx || (state > ctx->pwm_fan_max_state))
+ return -EINVAL;
+
+ if (state == ctx->pwm_fan_state)
+ return 0;
+
+ ret = __set_pwm(ctx, ctx->pwm_fan_cooling_levels[state]);
+ if (ret) {
+ dev_err(&cdev->device, "Cannot set pwm!\n");
+ return ret;
+ }
+
+ ctx->pwm_fan_state = state;
+
+ return ret;
+}
+
+static const struct thermal_cooling_device_ops pwm_fan_cooling_ops = {
+ .get_max_state = pwm_fan_get_max_state,
+ .get_cur_state = pwm_fan_get_cur_state,
+ .set_cur_state = pwm_fan_set_cur_state,
+};
+
+static int pwm_fan_of_get_cooling_data(struct device *dev,
+ struct pwm_fan_ctx *ctx)
+{
+ struct device_node *np = dev->of_node;
+ int num, i, ret;
+
+ if (!of_find_property(np, "cooling-levels", NULL))
+ return 0;
+
+ ret = of_property_count_u32_elems(np, "cooling-levels");
+ if (ret <= 0) {
+ dev_err(dev, "Wrong data!\n");
+ return ret ? : -EINVAL;
+ }
+
+ num = ret;
+ ctx->pwm_fan_cooling_levels = devm_kzalloc(dev, num * sizeof(u32),
+ GFP_KERNEL);
+ if (!ctx->pwm_fan_cooling_levels)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(np, "cooling-levels",
+ ctx->pwm_fan_cooling_levels, num);
+ if (ret) {
+ dev_err(dev, "Property 'cooling-levels' cannot be read!\n");
+ return ret;
+ }
+
+ for (i = 0; i < num; i++) {
+ if (ctx->pwm_fan_cooling_levels[i] > MAX_PWM) {
+ dev_err(dev, "PWM fan state[%d]:%d > %d\n", i,
+ ctx->pwm_fan_cooling_levels[i], MAX_PWM);
+ return -EINVAL;
+ }
+ }
+
+ ctx->pwm_fan_max_state = num - 1;
+
+ return 0;
+}
+
static int pwm_fan_probe(struct platform_device *pdev)
{
- struct device *hwmon;
+ struct thermal_cooling_device *cdev;
struct pwm_fan_ctx *ctx;
+ struct device *hwmon;
int duty_cycle;
int ret;
@@ -136,6 +257,26 @@ static int pwm_fan_probe(struct platform_device *pdev)
pwm_disable(ctx->pwm);
return PTR_ERR(hwmon);
}
+
+ ret = pwm_fan_of_get_cooling_data(&pdev->dev, ctx);
+ if (ret)
+ return ret;
+
+ ctx->pwm_fan_state = ctx->pwm_fan_max_state;
+ if (IS_ENABLED(CONFIG_THERMAL)) {
+ cdev = thermal_of_cooling_device_register(pdev->dev.of_node,
+ "pwm-fan", ctx,
+ &pwm_fan_cooling_ops);
+ if (IS_ERR(cdev)) {
+ dev_err(&pdev->dev,
+ "Failed to register pwm-fan as cooling device");
+ pwm_disable(ctx->pwm);
+ return PTR_ERR(cdev);
+ }
+ ctx->cdev = cdev;
+ thermal_cdev_update(cdev);
+ }
+
return 0;
}
@@ -143,6 +284,7 @@ static int pwm_fan_remove(struct platform_device *pdev)
{
struct pwm_fan_ctx *ctx = platform_get_drvdata(pdev);
+ thermal_cooling_device_unregister(ctx->cdev);
if (ctx->pwm_value)
pwm_disable(ctx->pwm);
return 0;
@@ -177,7 +319,7 @@ static int pwm_fan_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(pwm_fan_pm, pwm_fan_suspend, pwm_fan_resume);
-static struct of_device_id of_pwm_fan_match[] = {
+static const struct of_device_id of_pwm_fan_match[] = {
{ .compatible = "pwm-fan", },
{},
};
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c
index cf1848b8fb32..8ba419d343f8 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress.c
@@ -193,7 +193,7 @@ static struct vexpress_hwmon_type vexpress_hwmon_energy = {
},
};
-static struct of_device_id vexpress_hwmon_of_match[] = {
+static const struct of_device_id vexpress_hwmon_of_match[] = {
#if !defined(CONFIG_REGULATOR_VEXPRESS)
{
.compatible = "arm,vexpress-volt",
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 02:32:31 +0000