diff options
Diffstat (limited to 'drivers/iio/light')
-rw-r--r-- | drivers/iio/light/Kconfig | 32 | ||||
-rw-r--r-- | drivers/iio/light/Makefile | 3 | ||||
-rw-r--r-- | drivers/iio/light/apds9960.c | 13 | ||||
-rw-r--r-- | drivers/iio/light/bh1780.c | 297 | ||||
-rw-r--r-- | drivers/iio/light/max44000.c | 639 | ||||
-rw-r--r-- | drivers/iio/light/veml6070.c | 218 |
6 files changed, 1198 insertions, 4 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index cfd3df8416bb..7c566f516572 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -73,6 +73,17 @@ config BH1750 To compile this driver as a module, choose M here: the module will be called bh1750. +config BH1780 + tristate "ROHM BH1780 ambient light sensor" + depends on I2C + depends on !SENSORS_BH1780 + help + Say Y here to build support for the ROHM BH1780GLI ambient + light sensor. + + To compile this driver as a module, choose M here: the module will + be called bh1780. + config CM32181 depends on I2C tristate "CM32181 driver" @@ -223,6 +234,17 @@ config LTR501 This driver can also be built as a module. If so, the module will be called ltr501. +config MAX44000 + tristate "MAX44000 Ambient and Infrared Proximity Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for Maxim Integrated's + MAX44000 ambient and infrared proximity sensor device. + + To compile this driver as a module, choose M here: + the module will be called max44000. + config OPT3001 tristate "Texas Instruments OPT3001 Light Sensor" depends on I2C @@ -320,4 +342,14 @@ config VCNL4000 To compile this driver as a module, choose M here: the module will be called vcnl4000. +config VEML6070 + tristate "VEML6070 UV A light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6070 UV A + light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6070. + endmenu diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index b2c31053db0c..6f2a3c62de27 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_AL3320A) += al3320a.o obj-$(CONFIG_APDS9300) += apds9300.o obj-$(CONFIG_APDS9960) += apds9960.o obj-$(CONFIG_BH1750) += bh1750.o +obj-$(CONFIG_BH1780) += bh1780.o obj-$(CONFIG_CM32181) += cm32181.o obj-$(CONFIG_CM3232) += cm3232.o obj-$(CONFIG_CM3323) += cm3323.o @@ -20,6 +21,7 @@ obj-$(CONFIG_ISL29125) += isl29125.o obj-$(CONFIG_JSA1212) += jsa1212.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_LTR501) += ltr501.o +obj-$(CONFIG_MAX44000) += max44000.o obj-$(CONFIG_OPT3001) += opt3001.o obj-$(CONFIG_PA12203001) += pa12203001.o obj-$(CONFIG_RPR0521) += rpr0521.o @@ -30,3 +32,4 @@ obj-$(CONFIG_TCS3472) += tcs3472.o obj-$(CONFIG_TSL4531) += tsl4531.o obj-$(CONFIG_US5182D) += us5182d.o obj-$(CONFIG_VCNL4000) += vcnl4000.o +obj-$(CONFIG_VEML6070) += veml6070.o diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c index a6af56ad10e1..b4dbb3912977 100644 --- a/drivers/iio/light/apds9960.c +++ b/drivers/iio/light/apds9960.c @@ -321,8 +321,12 @@ static const struct iio_chan_spec apds9960_channels[] = { }; /* integration time in us */ -static const int apds9960_int_time[][2] = - { {28000, 246}, {100000, 219}, {200000, 182}, {700000, 0} }; +static const int apds9960_int_time[][2] = { + { 28000, 246}, + {100000, 219}, + {200000, 182}, + {700000, 0} +}; /* gain mapping */ static const int apds9960_pxs_gain_map[] = {1, 2, 4, 8}; @@ -491,9 +495,10 @@ static int apds9960_read_raw(struct iio_dev *indio_dev, case IIO_INTENSITY: ret = regmap_bulk_read(data->regmap, chan->address, &buf, 2); - if (!ret) + if (!ret) { ret = IIO_VAL_INT; - *val = le16_to_cpu(buf); + *val = le16_to_cpu(buf); + } break; default: ret = -EINVAL; diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c new file mode 100644 index 000000000000..72b364e4aa72 --- /dev/null +++ b/drivers/iio/light/bh1780.c @@ -0,0 +1,297 @@ +/* + * ROHM 1780GLI Ambient Light Sensor Driver + * + * Copyright (C) 2016 Linaro Ltd. + * Author: Linus Walleij <linus.walleij@linaro.org> + * Loosely based on the previous BH1780 ALS misc driver + * Copyright (C) 2010 Texas Instruments + * Author: Hemanth V <hemanthv@ti.com> + */ +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm_runtime.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/bitops.h> + +#define BH1780_CMD_BIT BIT(7) +#define BH1780_REG_CONTROL 0x00 +#define BH1780_REG_PARTID 0x0A +#define BH1780_REG_MANFID 0x0B +#define BH1780_REG_DLOW 0x0C +#define BH1780_REG_DHIGH 0x0D + +#define BH1780_REVMASK GENMASK(3,0) +#define BH1780_POWMASK GENMASK(1,0) +#define BH1780_POFF (0x0) +#define BH1780_PON (0x3) + +/* power on settling time in ms */ +#define BH1780_PON_DELAY 2 +/* max time before value available in ms */ +#define BH1780_INTERVAL 250 + +struct bh1780_data { + struct i2c_client *client; +}; + +static int bh1780_write(struct bh1780_data *bh1780, u8 reg, u8 val) +{ + int ret = i2c_smbus_write_byte_data(bh1780->client, + BH1780_CMD_BIT | reg, + val); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_write_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_byte_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_byte_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_read_word(struct bh1780_data *bh1780, u8 reg) +{ + int ret = i2c_smbus_read_word_data(bh1780->client, + BH1780_CMD_BIT | reg); + if (ret < 0) + dev_err(&bh1780->client->dev, + "i2c_smbus_read_word_data failed error " + "%d, register %01x\n", + ret, reg); + return ret; +} + +static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev, + unsigned int reg, unsigned int writeval, + unsigned int *readval) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + if (!readval) + bh1780_write(bh1780, (u8)reg, (u8)writeval); + + ret = bh1780_read(bh1780, (u8)reg); + if (ret < 0) + return ret; + + *readval = ret; + + return 0; +} + +static int bh1780_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int value; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + pm_runtime_get_sync(&bh1780->client->dev); + value = bh1780_read_word(bh1780, BH1780_REG_DLOW); + if (value < 0) + return value; + pm_runtime_mark_last_busy(&bh1780->client->dev); + pm_runtime_put_autosuspend(&bh1780->client->dev); + *val = value; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = BH1780_INTERVAL * 1000; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static const struct iio_info bh1780_info = { + .driver_module = THIS_MODULE, + .read_raw = bh1780_read_raw, + .debugfs_reg_access = bh1780_debugfs_reg_access, +}; + +static const struct iio_chan_spec bh1780_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_INT_TIME) + } +}; + +static int bh1780_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret; + struct bh1780_data *bh1780; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct iio_dev *indio_dev; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) + return -EIO; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*bh1780)); + if (!indio_dev) + return -ENOMEM; + + bh1780 = iio_priv(indio_dev); + bh1780->client = client; + i2c_set_clientdata(client, indio_dev); + + /* Power up the device */ + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) + return ret; + msleep(BH1780_PON_DELAY); + pm_runtime_get_noresume(&client->dev); + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + + ret = bh1780_read(bh1780, BH1780_REG_PARTID); + if (ret < 0) + goto out_disable_pm; + dev_info(&client->dev, + "Ambient Light Sensor, Rev : %lu\n", + (ret & BH1780_REVMASK)); + + /* + * As the device takes 250 ms to even come up with a fresh + * measurement after power-on, do not shut it down unnecessarily. + * Set autosuspend to a five seconds. + */ + pm_runtime_set_autosuspend_delay(&client->dev, 5000); + pm_runtime_use_autosuspend(&client->dev); + pm_runtime_put(&client->dev); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &bh1780_info; + indio_dev->name = id->name; + indio_dev->channels = bh1780_channels; + indio_dev->num_channels = ARRAY_SIZE(bh1780_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = iio_device_register(indio_dev); + if (ret) + goto out_disable_pm; + return 0; + +out_disable_pm: + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + return ret; +} + +static int bh1780_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct bh1780_data *bh1780 = iio_priv(indio_dev); + int ret; + + iio_device_unregister(indio_dev); + pm_runtime_get_sync(&client->dev); + pm_runtime_put_noidle(&client->dev); + pm_runtime_disable(&client->dev); + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(&client->dev, "failed to power off\n"); + return ret; + } + + return 0; +} + +#ifdef CONFIG_PM +static int bh1780_runtime_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF); + if (ret < 0) { + dev_err(dev, "failed to runtime suspend\n"); + return ret; + } + + return 0; +} + +static int bh1780_runtime_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct bh1780_data *bh1780 = i2c_get_clientdata(client); + int ret; + + ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON); + if (ret < 0) { + dev_err(dev, "failed to runtime resume\n"); + return ret; + } + + /* Wait for power on, then for a value to be available */ + msleep(BH1780_PON_DELAY + BH1780_INTERVAL); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops bh1780_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(bh1780_runtime_suspend, + bh1780_runtime_resume, NULL) +}; + +static const struct i2c_device_id bh1780_id[] = { + { "bh1780", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, bh1780_id); + +#ifdef CONFIG_OF +static const struct of_device_id of_bh1780_match[] = { + { .compatible = "rohm,bh1780gli", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_bh1780_match); +#endif + +static struct i2c_driver bh1780_driver = { + .probe = bh1780_probe, + .remove = bh1780_remove, + .id_table = bh1780_id, + .driver = { + .name = "bh1780", + .pm = &bh1780_dev_pm_ops, + .of_match_table = of_match_ptr(of_bh1780_match), + }, +}; + +module_i2c_driver(bh1780_driver); + +MODULE_DESCRIPTION("ROHM BH1780GLI Ambient Light Sensor Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c new file mode 100644 index 000000000000..e01e58a9bd14 --- /dev/null +++ b/drivers/iio/light/max44000.c @@ -0,0 +1,639 @@ +/* + * MAX44000 Ambient and Infrared Proximity Sensor + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Data sheet: https://datasheets.maximintegrated.com/en/ds/MAX44000.pdf + * + * 7-bit I2C slave address 0x4a + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/util_macros.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/acpi.h> + +#define MAX44000_DRV_NAME "max44000" + +/* Registers in datasheet order */ +#define MAX44000_REG_STATUS 0x00 +#define MAX44000_REG_CFG_MAIN 0x01 +#define MAX44000_REG_CFG_RX 0x02 +#define MAX44000_REG_CFG_TX 0x03 +#define MAX44000_REG_ALS_DATA_HI 0x04 +#define MAX44000_REG_ALS_DATA_LO 0x05 +#define MAX44000_REG_PRX_DATA 0x16 +#define MAX44000_REG_ALS_UPTHR_HI 0x06 +#define MAX44000_REG_ALS_UPTHR_LO 0x07 +#define MAX44000_REG_ALS_LOTHR_HI 0x08 +#define MAX44000_REG_ALS_LOTHR_LO 0x09 +#define MAX44000_REG_PST 0x0a +#define MAX44000_REG_PRX_IND 0x0b +#define MAX44000_REG_PRX_THR 0x0c +#define MAX44000_REG_TRIM_GAIN_GREEN 0x0f +#define MAX44000_REG_TRIM_GAIN_IR 0x10 + +/* REG_CFG bits */ +#define MAX44000_CFG_ALSINTE 0x01 +#define MAX44000_CFG_PRXINTE 0x02 +#define MAX44000_CFG_MASK 0x1c +#define MAX44000_CFG_MODE_SHUTDOWN 0x00 +#define MAX44000_CFG_MODE_ALS_GIR 0x04 +#define MAX44000_CFG_MODE_ALS_G 0x08 +#define MAX44000_CFG_MODE_ALS_IR 0x0c +#define MAX44000_CFG_MODE_ALS_PRX 0x10 +#define MAX44000_CFG_MODE_PRX 0x14 +#define MAX44000_CFG_TRIM 0x20 + +/* + * Upper 4 bits are not documented but start as 1 on powerup + * Setting them to 0 causes proximity to misbehave so set them to 1 + */ +#define MAX44000_REG_CFG_RX_DEFAULT 0xf0 + +/* REG_RX bits */ +#define MAX44000_CFG_RX_ALSTIM_MASK 0x0c +#define MAX44000_CFG_RX_ALSTIM_SHIFT 2 +#define MAX44000_CFG_RX_ALSPGA_MASK 0x03 +#define MAX44000_CFG_RX_ALSPGA_SHIFT 0 + +/* REG_TX bits */ +#define MAX44000_LED_CURRENT_MASK 0xf +#define MAX44000_LED_CURRENT_MAX 11 +#define MAX44000_LED_CURRENT_DEFAULT 6 + +#define MAX44000_ALSDATA_OVERFLOW 0x4000 + +struct max44000_data { + struct mutex lock; + struct regmap *regmap; +}; + +/* Default scale is set to the minimum of 0.03125 or 1 / (1 << 5) lux */ +#define MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 5 + +/* Scale can be multiplied by up to 128x via ALSPGA for measurement gain */ +static const int max44000_alspga_shift[] = {0, 2, 4, 7}; +#define MAX44000_ALSPGA_MAX_SHIFT 7 + +/* + * Scale can be multiplied by up to 64x via ALSTIM because of lost resolution + * + * This scaling factor is hidden from userspace and instead accounted for when + * reading raw values from the device. + * + * This makes it possible to cleanly expose ALSPGA as IIO_CHAN_INFO_SCALE and + * ALSTIM as IIO_CHAN_INFO_INT_TIME without the values affecting each other. + * + * Handling this internally is also required for buffer support because the + * channel's scan_type can't be modified dynamically. + */ +static const int max44000_alstim_shift[] = {0, 2, 4, 6}; +#define MAX44000_ALSTIM_SHIFT(alstim) (2 * (alstim)) + +/* Available integration times with pretty manual alignment: */ +static const int max44000_int_time_avail_ns_array[] = { + 100000000, + 25000000, + 6250000, + 1562500, +}; +static const char max44000_int_time_avail_str[] = + "0.100 " + "0.025 " + "0.00625 " + "0.001625"; + +/* Available scales (internal to ulux) with pretty manual alignment: */ +static const int max44000_scale_avail_ulux_array[] = { + 31250, + 125000, + 500000, + 4000000, +}; +static const char max44000_scale_avail_str[] = + "0.03125 " + "0.125 " + "0.5 " + "4"; + +#define MAX44000_SCAN_INDEX_ALS 0 +#define MAX44000_SCAN_INDEX_PRX 1 + +static const struct iio_chan_spec max44000_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_INT_TIME), + .scan_index = MAX44000_SCAN_INDEX_ALS, + .scan_type = { + .sign = 'u', + .realbits = 14, + .storagebits = 16, + } + }, + { + .type = IIO_PROXIMITY, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .scan_index = MAX44000_SCAN_INDEX_PRX, + .scan_type = { + .sign = 'u', + .realbits = 8, + .storagebits = 16, + } + }, + IIO_CHAN_SOFT_TIMESTAMP(2), + { + .type = IIO_CURRENT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "led", + .output = 1, + .scan_index = -1, + }, +}; + +static int max44000_read_alstim(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSTIM_MASK) >> MAX44000_CFG_RX_ALSTIM_SHIFT; +} + +static int max44000_write_alstim(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSTIM_MASK, + val << MAX44000_CFG_RX_ALSTIM_SHIFT); +} + +static int max44000_read_alspga(struct max44000_data *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_RX, &val); + if (ret < 0) + return ret; + return (val & MAX44000_CFG_RX_ALSPGA_MASK) >> MAX44000_CFG_RX_ALSPGA_SHIFT; +} + +static int max44000_write_alspga(struct max44000_data *data, int val) +{ + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_CFG_RX_ALSPGA_MASK, + val << MAX44000_CFG_RX_ALSPGA_SHIFT); +} + +static int max44000_read_alsval(struct max44000_data *data) +{ + u16 regval; + int alstim, ret; + + ret = regmap_bulk_read(data->regmap, MAX44000_REG_ALS_DATA_HI, + ®val, sizeof(regval)); + if (ret < 0) + return ret; + alstim = ret = max44000_read_alstim(data); + if (ret < 0) + return ret; + + regval = be16_to_cpu(regval); + + /* + * Overflow is explained on datasheet page 17. + * + * It's a warning that either the G or IR channel has become saturated + * and that the value in the register is likely incorrect. + * + * The recommendation is to change the scale (ALSPGA). + * The driver just returns the max representable value. + */ + if (regval & MAX44000_ALSDATA_OVERFLOW) + return 0x3FFF; + + return regval << MAX44000_ALSTIM_SHIFT(alstim); +} + +static int max44000_write_led_current_raw(struct max44000_data *data, int val) +{ + /* Maybe we should clamp the value instead? */ + if (val < 0 || val > MAX44000_LED_CURRENT_MAX) + return -ERANGE; + if (val >= 8) + val += 4; + return regmap_write_bits(data->regmap, MAX44000_REG_CFG_TX, + MAX44000_LED_CURRENT_MASK, val); +} + +static int max44000_read_led_current_raw(struct max44000_data *data) +{ + unsigned int regval; + int ret; + + ret = regmap_read(data->regmap, MAX44000_REG_CFG_TX, ®val); + if (ret < 0) + return ret; + regval &= MAX44000_LED_CURRENT_MASK; + if (regval >= 8) + regval -= 4; + return regval; +} + +static int max44000_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int alstim, alspga; + unsigned int regval; + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + switch (chan->type) { + case IIO_LIGHT: + mutex_lock(&data->lock); + ret = max44000_read_alsval(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + case IIO_PROXIMITY: + mutex_lock(&data->lock); + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = regval; + return IIO_VAL_INT; + + case IIO_CURRENT: + mutex_lock(&data->lock); + ret = max44000_read_led_current_raw(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_CURRENT: + /* Output register is in 10s of miliamps */ + *val = 10; + return IIO_VAL_INT; + + case IIO_LIGHT: + mutex_lock(&data->lock); + alspga = ret = max44000_read_alspga(data); + mutex_unlock(&data->lock); + if (ret < 0) + return ret; + + /* Avoid negative shifts */ + *val = (1 << MAX44000_ALSPGA_MAX_SHIFT); + *val2 = MAX44000_ALS_TO_LUX_DEFAULT_FRACTION_LOG2 + + MAX44000_ALSPGA_MAX_SHIFT + - max44000_alspga_shift[alspga]; + return IIO_VAL_FRACTIONAL_LOG2; + + default: + return -EINVAL; + } + + case IIO_CHAN_INFO_INT_TIME: + mutex_lock(&data->lock); + alstim = ret = max44000_read_alstim(data); + mutex_unlock(&data->lock); + + if (ret < 0) + return ret; + *val = 0; + *val2 = max44000_int_time_avail_ns_array[alstim]; + return IIO_VAL_INT_PLUS_NANO; + + default: + return -EINVAL; + } +} + +static int max44000_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct max44000_data *data = iio_priv(indio_dev); + int ret; + + if (mask == IIO_CHAN_INFO_RAW && chan->type == IIO_CURRENT) { + mutex_lock(&data->lock); + ret = max44000_write_led_current_raw(data, val); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) { + s64 valns = val * NSEC_PER_SEC + val2; + int alstim = find_closest_descending(valns, + max44000_int_time_avail_ns_array, + ARRAY_SIZE(max44000_int_time_avail_ns_array)); + mutex_lock(&data->lock); + ret = max44000_write_alstim(data, alstim); + mutex_unlock(&data->lock); + return ret; + } else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) { + s64 valus = val * USEC_PER_SEC + val2; + int alspga = find_closest(valus, + max44000_scale_avail_ulux_array, + ARRAY_SIZE(max44000_scale_avail_ulux_array)); + mutex_lock(&data->lock); + ret = max44000_write_alspga(data, alspga); + mutex_unlock(&data->lock); + return ret; + } + + return -EINVAL; +} + +static int max44000_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + if (mask == IIO_CHAN_INFO_INT_TIME && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_NANO; + else if (mask == IIO_CHAN_INFO_SCALE && chan->type == IIO_LIGHT) + return IIO_VAL_INT_PLUS_MICRO; + else + return IIO_VAL_INT; +} + +static IIO_CONST_ATTR(illuminance_integration_time_available, max44000_int_time_avail_str); +static IIO_CONST_ATTR(illuminance_scale_available, max44000_scale_avail_str); + +static struct attribute *max44000_attributes[] = { + &iio_const_attr_illuminance_integration_time_available.dev_attr.attr, + &iio_const_attr_illuminance_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group max44000_attribute_group = { + .attrs = max44000_attributes, +}; + +static const struct iio_info max44000_info = { + .driver_module = THIS_MODULE, + .read_raw = max44000_read_raw, + .write_raw = max44000_write_raw, + .write_raw_get_fmt = max44000_write_raw_get_fmt, + .attrs = &max44000_attribute_group, +}; + +static bool max44000_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_CFG_MAIN: + case MAX44000_REG_CFG_RX: + case MAX44000_REG_CFG_TX: + case MAX44000_REG_ALS_UPTHR_HI: + case MAX44000_REG_ALS_UPTHR_LO: + case MAX44000_REG_ALS_LOTHR_HI: + case MAX44000_REG_ALS_LOTHR_LO: + case MAX44000_REG_PST: + case MAX44000_REG_PRX_IND: + case MAX44000_REG_PRX_THR: + case MAX44000_REG_TRIM_GAIN_GREEN: + case MAX44000_REG_TRIM_GAIN_IR: + return true; + default: + return false; + } +} + +static bool max44000_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case MAX44000_REG_STATUS: + case MAX44000_REG_ALS_DATA_HI: + case MAX44000_REG_ALS_DATA_LO: + case MAX44000_REG_PRX_DATA: + return true; + default: + return false; + } +} + +static bool max44000_precious_reg(struct device *dev, unsigned int reg) +{ + return reg == MAX44000_REG_STATUS; +} + +static const struct regmap_config max44000_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = MAX44000_REG_PRX_DATA, + .readable_reg = max44000_readable_reg, + .writeable_reg = max44000_writeable_reg, + .volatile_reg = max44000_volatile_reg, + .precious_reg = max44000_precious_reg, + + .use_single_rw = 1, + .cache_type = REGCACHE_RBTREE, +}; + +static irqreturn_t max44000_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct max44000_data *data = iio_priv(indio_dev); + u16 buf[8]; /* 2x u16 + padding + 8 bytes timestamp */ + int index = 0; + unsigned int regval; + int ret; + + mutex_lock(&data->lock); + if (test_bit(MAX44000_SCAN_INDEX_ALS, indio_dev->active_scan_mask)) { + ret = max44000_read_alsval(data); + if (ret < 0) + goto out_unlock; + buf[index++] = ret; + } + if (test_bit(MAX44000_SCAN_INDEX_PRX, indio_dev->active_scan_mask)) { + ret = regmap_read(data->regmap, MAX44000_REG_PRX_DATA, ®val); + if (ret < 0) + goto out_unlock; + buf[index] = regval; + } + mutex_unlock(&data->lock); + + iio_push_to_buffers_with_timestamp(indio_dev, buf, iio_get_time_ns()); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; + +out_unlock: + mutex_unlock(&data->lock); + iio_trigger_notify_done(indio_dev->trig); + return IRQ_HANDLED; +} + +static int max44000_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct max44000_data *data; + struct iio_dev *indio_dev; + int ret, reg; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + data = iio_priv(indio_dev); + data->regmap = devm_regmap_init_i2c(client, &max44000_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap_init failed!\n"); + return PTR_ERR(data->regmap); + } + + i2c_set_clientdata(client, indio_dev); + mutex_init(&data->lock); + indio_dev->dev.parent = &client->dev; + indio_dev->info = &max44000_info; + indio_dev->name = MAX44000_DRV_NAME; + indio_dev->channels = max44000_channels; + indio_dev->num_channels = ARRAY_SIZE(max44000_channels); + + /* + * The device doesn't have a reset function so we just clear some + * important bits at probe time to ensure sane operation. + * + * Since we don't support interrupts/events the threshold values are + * not important. We also don't touch trim values. + */ + + /* Reset ALS scaling bits */ + ret = regmap_write(data->regmap, MAX44000_REG_CFG_RX, + MAX44000_REG_CFG_RX_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write default CFG_RX: %d\n", + ret); + return ret; + } + + /* + * By default the LED pulse used for the proximity sensor is disabled. + * Set a middle value so that we get some sort of valid data by default. + */ + ret = max44000_write_led_current_raw(data, MAX44000_LED_CURRENT_DEFAULT); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Reset CFG bits to ALS_PRX mode which allows easy reading of both values. */ + reg = MAX44000_CFG_TRIM | MAX44000_CFG_MODE_ALS_PRX; + ret = regmap_write(data->regmap, MAX44000_REG_CFG_MAIN, reg); + if (ret < 0) { + dev_err(&client->dev, "failed to write init config: %d\n", ret); + return ret; + } + + /* Read status at least once to clear any stale interrupt bits. */ + ret = regmap_read(data->regmap, MAX44000_REG_STATUS, ®); + if (ret < 0) { + dev_err(&client->dev, "failed to read init status: %d\n", ret); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, NULL, max44000_trigger_handler, NULL); + if (ret < 0) { + dev_err(&client->dev, "iio triggered buffer setup failed\n"); + return ret; + } + + return iio_device_register(indio_dev); +} + +static int max44000_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + + return 0; +} + +static const struct i2c_device_id max44000_id[] = { + {"max44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(i2c, max44000_id); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id max44000_acpi_match[] = { + {"MAX44000", 0}, + { } +}; +MODULE_DEVICE_TABLE(acpi, max44000_acpi_match); +#endif + +static struct i2c_driver max44000_driver = { + .driver = { + .name = MAX44000_DRV_NAME, + .acpi_match_table = ACPI_PTR(max44000_acpi_match), + }, + .probe = max44000_probe, + .remove = max44000_remove, + .id_table = max44000_id, +}; + +module_i2c_driver(max44000_driver); + +MODULE_AUTHOR("Crestez Dan Leonard <leonard.crestez@intel.com>"); +MODULE_DESCRIPTION("MAX44000 Ambient and Infrared Proximity Sensor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/veml6070.c b/drivers/iio/light/veml6070.c new file mode 100644 index 000000000000..bc1c4cb782cd --- /dev/null +++ b/drivers/iio/light/veml6070.c @@ -0,0 +1,218 @@ +/* + * veml6070.c - Support for Vishay VEML6070 UV A light sensor + * + * Copyright 2016 Peter Meerwald-Stadler <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for VEML6070 (7-bit I2C slave addresses 0x38 and 0x39) + * + * TODO: integration time, ACK signal + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define VEML6070_DRV_NAME "veml6070" + +#define VEML6070_ADDR_CONFIG_DATA_MSB 0x38 /* read: MSB data, write: config */ +#define VEML6070_ADDR_DATA_LSB 0x39 /* LSB data */ + +#define VEML6070_COMMAND_ACK BIT(5) /* raise interrupt when over threshold */ +#define VEML6070_COMMAND_IT GENMASK(3, 2) /* bit mask integration time */ +#define VEML6070_COMMAND_RSRVD BIT(1) /* reserved, set to 1 */ +#define VEML6070_COMMAND_SD BIT(0) /* shutdown mode when set */ + +#define VEML6070_IT_10 0x04 /* integration time 1x */ + +struct veml6070_data { + struct i2c_client *client1; + struct i2c_client *client2; + u8 config; + struct mutex lock; +}; + +static int veml6070_read(struct veml6070_data *data) +{ + int ret; + u8 msb, lsb; + + mutex_lock(&data->lock); + + /* disable shutdown */ + ret = i2c_smbus_write_byte(data->client1, + data->config & ~VEML6070_COMMAND_SD); + if (ret < 0) + goto out; + + msleep(125 + 10); /* measurement takes up to 125 ms for IT 1x */ + + ret = i2c_smbus_read_byte(data->client2); /* read MSB, address 0x39 */ + if (ret < 0) + goto out; + msb = ret; + + ret = i2c_smbus_read_byte(data->client1); /* read LSB, address 0x38 */ + if (ret < 0) + goto out; + lsb = ret; + + /* shutdown again */ + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto out; + + ret = (msb << 8) | lsb; + +out: + mutex_unlock(&data->lock); + return ret; +} + +static const struct iio_chan_spec veml6070_channels[] = { + { + .type = IIO_INTENSITY, + .modified = 1, + .channel2 = IIO_MOD_LIGHT_UV, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + }, + { + .type = IIO_UVINDEX, + .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), + } +}; + +static int veml6070_to_uv_index(unsigned val) +{ + /* + * conversion of raw UV intensity values to UV index depends on + * integration time (IT) and value of the resistor connected to + * the RSET pin (default: 270 KOhm) + */ + unsigned uvi[11] = { + 187, 373, 560, /* low */ + 746, 933, 1120, /* moderate */ + 1308, 1494, /* high */ + 1681, 1868, 2054}; /* very high */ + int i; + + for (i = 0; i < ARRAY_SIZE(uvi); i++) + if (val <= uvi[i]) + return i; + + return 11; /* extreme */ +} + +static int veml6070_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct veml6070_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + case IIO_CHAN_INFO_PROCESSED: + ret = veml6070_read(data); + if (ret < 0) + return ret; + if (mask == IIO_CHAN_INFO_PROCESSED) + *val = veml6070_to_uv_index(ret); + else + *val = ret; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static const struct iio_info veml6070_info = { + .read_raw = veml6070_read_raw, + .driver_module = THIS_MODULE, +}; + +static int veml6070_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct veml6070_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client1 = client; + mutex_init(&data->lock); + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &veml6070_info; + indio_dev->channels = veml6070_channels; + indio_dev->num_channels = ARRAY_SIZE(veml6070_channels); + indio_dev->name = VEML6070_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + + data->client2 = i2c_new_dummy(client->adapter, VEML6070_ADDR_DATA_LSB); + if (!data->client2) { + dev_err(&client->dev, "i2c device for second chip address failed\n"); + return -ENODEV; + } + + data->config = VEML6070_IT_10 | VEML6070_COMMAND_RSRVD | + VEML6070_COMMAND_SD; + ret = i2c_smbus_write_byte(data->client1, data->config); + if (ret < 0) + goto fail; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto fail; + + return ret; + +fail: + i2c_unregister_device(data->client2); + return ret; +} + +static int veml6070_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct veml6070_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + i2c_unregister_device(data->client2); + + return 0; +} + +static const struct i2c_device_id veml6070_id[] = { + { "veml6070", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, veml6070_id); + +static struct i2c_driver veml6070_driver = { + .driver = { + .name = VEML6070_DRV_NAME, + }, + .probe = veml6070_probe, + .remove = veml6070_remove, + .id_table = veml6070_id, +}; + +module_i2c_driver(veml6070_driver); + +MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Vishay VEML6070 UV A light sensor driver"); +MODULE_LICENSE("GPL"); |