summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cirrus/mac89x0.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/cirrus/mac89x0.c')
-rw-r--r--drivers/net/ethernet/cirrus/mac89x0.c158
1 files changed, 49 insertions, 109 deletions
diff --git a/drivers/net/ethernet/cirrus/mac89x0.c b/drivers/net/ethernet/cirrus/mac89x0.c
index 977d4c2c759d..3f8fe8fd79cc 100644
--- a/drivers/net/ethernet/cirrus/mac89x0.c
+++ b/drivers/net/ethernet/cirrus/mac89x0.c
@@ -56,21 +56,11 @@
local_irq_{dis,en}able()
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
static const char version[] =
"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
-/* ======================= configure the driver here ======================= */
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 0
-#endif
-
-/* ======================= end of configuration ======================= */
-
-
-/* Always include 'config.h' first in case the user wants to turn on
- or override something. */
#include <linux/module.h>
/*
@@ -93,6 +83,7 @@ static const char version[] =
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netdevice.h>
+#include <linux/platform_device.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
@@ -105,24 +96,22 @@ static const char version[] =
#include "cs89x0.h"
-static unsigned int net_debug = NET_DEBUG;
+static int debug = -1;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "debug message level");
/* Information that need to be kept for each board. */
struct net_local {
+ int msg_enable;
int chip_type; /* one of: CS8900, CS8920, CS8920M */
char chip_revision; /* revision letter of the chip ('A'...) */
int send_cmd; /* the propercommand used to send a packet. */
int rx_mode;
int curr_rx_cfg;
int send_underrun; /* keep track of how many underruns in a row we get */
- struct sk_buff *skb;
};
/* Index to functions, as function prototypes. */
-
-#if 0
-extern void reset_chip(struct net_device *dev);
-#endif
static int net_open(struct net_device *dev);
static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
static irqreturn_t net_interrupt(int irq, void *dev_id);
@@ -132,10 +121,6 @@ static int net_close(struct net_device *dev);
static struct net_device_stats *net_get_stats(struct net_device *dev);
static int set_mac_address(struct net_device *dev, void *addr);
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-
/* For reading/writing registers ISA-style */
static inline int
readreg_io(struct net_device *dev, int portno)
@@ -176,12 +161,10 @@ static const struct net_device_ops mac89x0_netdev_ops = {
/* Probe for the CS8900 card in slot E. We won't bother looking
anywhere else until we have a really good reason to do so. */
-struct net_device * __init mac89x0_probe(int unit)
+static int mac89x0_device_probe(struct platform_device *pdev)
{
struct net_device *dev;
- static int once_is_enough;
struct net_local *lp;
- static unsigned version_printed;
int i, slot;
unsigned rev_type = 0;
unsigned long ioaddr;
@@ -189,21 +172,9 @@ struct net_device * __init mac89x0_probe(int unit)
int err = -ENODEV;
struct nubus_rsrc *fres;
- if (!MACH_IS_MAC)
- return ERR_PTR(-ENODEV);
-
dev = alloc_etherdev(sizeof(struct net_local));
if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- if (once_is_enough)
- goto out;
- once_is_enough = 1;
+ return -ENOMEM;
/* We might have to parameterize this later */
slot = 0xE;
@@ -230,9 +201,13 @@ struct net_device * __init mac89x0_probe(int unit)
if (sig != swab16(CHIP_EISA_ID_SIG))
goto out;
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
/* Initialize the net_device structure. */
lp = netdev_priv(dev);
+ lp->msg_enable = netif_msg_init(debug, 0);
+
/* Fill in the 'dev' fields. */
dev->base_addr = ioaddr;
dev->mem_start = (unsigned long)
@@ -255,19 +230,16 @@ struct net_device * __init mac89x0_probe(int unit)
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
lp->send_cmd = TX_NOW;
- if (net_debug && version_printed++ == 0)
- printk(version);
+ netif_dbg(lp, drv, dev, "%s", version);
- printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
- dev->name,
- lp->chip_type==CS8900?'0':'2',
- lp->chip_type==CS8920M?"M":"",
- lp->chip_revision,
- dev->base_addr);
+ pr_info("cs89%c0%s rev %c found at %#8lx\n",
+ lp->chip_type == CS8900 ? '0' : '2',
+ lp->chip_type == CS8920M ? "M" : "",
+ lp->chip_revision, dev->base_addr);
/* Try to read the MAC address */
if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
- printk("\nmac89x0: No EEPROM, giving up now.\n");
+ pr_info("No EEPROM, giving up now.\n");
goto out1;
} else {
for (i = 0; i < ETH_ALEN; i += 2) {
@@ -282,39 +254,23 @@ struct net_device * __init mac89x0_probe(int unit)
/* print the IRQ and ethernet address. */
- printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
+ pr_info("MAC %pM, IRQ %d\n", dev->dev_addr, dev->irq);
dev->netdev_ops = &mac89x0_netdev_ops;
err = register_netdev(dev);
if (err)
goto out1;
- return NULL;
+
+ platform_set_drvdata(pdev, dev);
+ return 0;
out1:
nubus_writew(0, dev->base_addr + ADD_PORT);
out:
free_netdev(dev);
- return ERR_PTR(err);
+ return err;
}
-#if 0
-/* This is useful for something, but I don't know what yet. */
-void __init reset_chip(struct net_device *dev)
-{
- int reset_start_time;
-
- writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
-
- /* wait 30 ms */
- msleep_interruptible(30);
-
- /* Wait until the chip is reset */
- reset_start_time = jiffies;
- while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
- ;
-}
-#endif
-
/* Open/initialize the board. This is called (in the current kernel)
sometime after booting when the 'ifconfig' program is run.
@@ -374,11 +330,9 @@ net_send_packet(struct sk_buff *skb, struct net_device *dev)
struct net_local *lp = netdev_priv(dev);
unsigned long flags;
- if (net_debug > 3)
- printk("%s: sent %d byte packet of type %x\n",
- dev->name, skb->len,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
- | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ netif_dbg(lp, tx_queued, dev, "sent %d byte packet of type %x\n",
+ skb->len, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
/* keep the upload from being interrupted, since we
ask the chip to start transmitting before the
@@ -416,11 +370,6 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
struct net_local *lp;
int ioaddr, status;
- if (dev == NULL) {
- printk ("net_interrupt(): irq %d for unknown device.\n", irq);
- return IRQ_NONE;
- }
-
ioaddr = dev->base_addr;
lp = netdev_priv(dev);
@@ -432,7 +381,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
faster than you can read them off, you're screwed. Hasta la
vista, baby! */
while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
- if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
+ netif_dbg(lp, intr, dev, "status=%04x\n", status);
switch(status & ISQ_EVENT_MASK) {
case ISQ_RECEIVER_EVENT:
/* Got a packet(s). */
@@ -462,7 +411,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
netif_wake_queue(dev);
}
if (status & TX_UNDERRUN) {
- if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
+ netif_dbg(lp, tx_err, dev, "transmit underrun\n");
lp->send_underrun++;
if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
@@ -483,6 +432,7 @@ static irqreturn_t net_interrupt(int irq, void *dev_id)
static void
net_rx(struct net_device *dev)
{
+ struct net_local *lp = netdev_priv(dev);
struct sk_buff *skb;
int status, length;
@@ -506,7 +456,6 @@ net_rx(struct net_device *dev)
/* Malloc up new buffer. */
skb = alloc_skb(length, GFP_ATOMIC);
if (skb == NULL) {
- printk("%s: Memory squeeze, dropping packet.\n", dev->name);
dev->stats.rx_dropped++;
return;
}
@@ -515,10 +464,9 @@ net_rx(struct net_device *dev)
skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
length);
- if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
- dev->name, length,
- (skb->data[ETH_ALEN+ETH_ALEN] << 8)
- | skb->data[ETH_ALEN+ETH_ALEN+1]);
+ netif_dbg(lp, rx_status, dev, "received %d byte packet of type %x\n",
+ length, skb->data[ETH_ALEN + ETH_ALEN] << 8 |
+ skb->data[ETH_ALEN + ETH_ALEN + 1]);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
@@ -594,7 +542,7 @@ static int set_mac_address(struct net_device *dev, void *addr)
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN);
- printk("%s: Setting MAC address to %pM\n", dev->name, dev->dev_addr);
+ netdev_info(dev, "Setting MAC address to %pM\n", dev->dev_addr);
/* set the Ethernet address */
for (i=0; i < ETH_ALEN/2; i++)
@@ -603,32 +551,24 @@ static int set_mac_address(struct net_device *dev, void *addr)
return 0;
}
-#ifdef MODULE
-
-static struct net_device *dev_cs89x0;
-static int debug;
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
MODULE_LICENSE("GPL");
-int __init
-init_module(void)
+static int mac89x0_device_remove(struct platform_device *pdev)
{
- net_debug = debug;
- dev_cs89x0 = mac89x0_probe(-1);
- if (IS_ERR(dev_cs89x0)) {
- printk(KERN_WARNING "mac89x0.c: No card found\n");
- return PTR_ERR(dev_cs89x0);
- }
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ unregister_netdev(dev);
+ nubus_writew(0, dev->base_addr + ADD_PORT);
+ free_netdev(dev);
return 0;
}
-void
-cleanup_module(void)
-{
- unregister_netdev(dev_cs89x0);
- nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
- free_netdev(dev_cs89x0);
-}
-#endif /* MODULE */
+static struct platform_driver mac89x0_platform_driver = {
+ .probe = mac89x0_device_probe,
+ .remove = mac89x0_device_remove,
+ .driver = {
+ .name = "mac89x0",
+ },
+};
+
+module_platform_driver(mac89x0_platform_driver);