summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ethtool.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c240
1 files changed, 111 insertions, 129 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index f91a8f3f9d48..7c8ca658d553 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,12 +35,11 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/vmalloc.h>
-#include <linux/mdio.h>
#include <linux/pm_runtime.h>
#include "e1000.h"
-enum {NETDEV_STATS, E1000_STATS};
+enum { NETDEV_STATS, E1000_STATS };
struct e1000_stats {
char stat_string[ETH_GSTRING_LEN];
@@ -121,6 +120,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
"Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)"
};
+
#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
static int e1000_get_settings(struct net_device *netdev,
@@ -197,8 +197,7 @@ static int e1000_get_settings(struct net_device *netdev,
/* MDI-X => 2; MDI =>1; Invalid =>0 */
if ((hw->phy.media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
- ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : ETH_TP_MDI;
else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
@@ -224,8 +223,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
/* Fiber NICs only allow 1000 gbps Full duplex */
if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL) {
+ (spd != SPEED_1000) && (dplx != DUPLEX_FULL)) {
goto err_inval;
}
@@ -298,12 +296,10 @@ static int e1000_set_settings(struct net_device *netdev,
hw->mac.autoneg = 1;
if (hw->phy.media_type == e1000_media_type_fiber)
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
+ ADVERTISED_FIBRE | ADVERTISED_Autoneg;
else
hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
+ ADVERTISED_TP | ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
@@ -346,7 +342,7 @@ static void e1000_get_pauseparam(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
if (hw->fc.current_mode == e1000_fc_rx_pause) {
pause->rx_pause = 1;
@@ -435,7 +431,7 @@ static void e1000_get_regs(struct net_device *netdev,
memset(p, 0, E1000_REGS_LEN * sizeof(u32));
regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
- adapter->pdev->device;
+ adapter->pdev->device;
regs_buff[0] = er32(CTRL);
regs_buff[1] = er32(STATUS);
@@ -503,8 +499,8 @@ static int e1000_get_eeprom(struct net_device *netdev,
first_word = eeprom->offset >> 1;
last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
+ eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+ GFP_KERNEL);
if (!eeprom_buff)
return -ENOMEM;
@@ -515,7 +511,7 @@ static int e1000_get_eeprom(struct net_device *netdev,
} else {
for (i = 0; i < last_word - first_word + 1; i++) {
ret_val = e1000_read_nvm(hw, first_word + i, 1,
- &eeprom_buff[i]);
+ &eeprom_buff[i]);
if (ret_val)
break;
}
@@ -553,7 +549,8 @@ static int e1000_set_eeprom(struct net_device *netdev,
if (eeprom->len == 0)
return -EOPNOTSUPP;
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ if (eeprom->magic !=
+ (adapter->pdev->vendor | (adapter->pdev->device << 16)))
return -EFAULT;
if (adapter->flags & FLAG_READ_ONLY_NVM)
@@ -579,7 +576,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
/* need read/modify/write of last changed EEPROM word */
/* only the first byte of the word is being modified */
ret_val = e1000_read_nvm(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
+ &eeprom_buff[last_word - first_word]);
if (ret_val)
goto out;
@@ -618,8 +615,7 @@ static void e1000_get_drvinfo(struct net_device *netdev,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- strlcpy(drvinfo->driver, e1000e_driver_name,
- sizeof(drvinfo->driver));
+ strlcpy(drvinfo->driver, e1000e_driver_name, sizeof(drvinfo->driver));
strlcpy(drvinfo->version, e1000e_driver_version,
sizeof(drvinfo->version));
@@ -627,10 +623,10 @@ static void e1000_get_drvinfo(struct net_device *netdev,
* PCI-E controllers
*/
snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
- "%d.%d-%d",
- (adapter->eeprom_vers & 0xF000) >> 12,
- (adapter->eeprom_vers & 0x0FF0) >> 4,
- (adapter->eeprom_vers & 0x000F));
+ "%d.%d-%d",
+ (adapter->eeprom_vers & 0xF000) >> 12,
+ (adapter->eeprom_vers & 0x0FF0) >> 4,
+ (adapter->eeprom_vers & 0x000F));
strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
sizeof(drvinfo->bus_info));
@@ -756,7 +752,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
{
u32 pat, val;
static const u32 test[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+ };
for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
(test[pat] & write));
@@ -786,6 +783,7 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
}
return 0;
}
+
#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
do { \
if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
@@ -813,16 +811,16 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
u32 wlock_mac = 0;
/* The status register is Read Only, so a write should fail.
- * Some bits that get toggled are ignored.
+ * Some bits that get toggled are ignored. There are several bits
+ * on newer hardware that are r/w.
*/
switch (mac->type) {
- /* there are several bits on newer hardware that are r/w */
case e1000_82571:
case e1000_82572:
case e1000_80003es2lan:
toggle = 0x7FFFF3FF;
break;
- default:
+ default:
toggle = 0x7FFFF033;
break;
}
@@ -928,7 +926,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
}
/* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
+ if ((checksum != (u16)NVM_SUM) && !(*data))
*data = 2;
return *data;
@@ -936,7 +934,7 @@ static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
static irqreturn_t e1000_test_intr(int __always_unused irq, void *data)
{
- struct net_device *netdev = (struct net_device *) data;
+ struct net_device *netdev = (struct net_device *)data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -969,8 +967,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
netdev)) {
shared_int = 0;
- } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
+ } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, netdev->name,
+ netdev)) {
*data = 1;
ret_val = -1;
goto out;
@@ -1080,28 +1078,33 @@ static void e1000_free_desc_rings(struct e1000_adapter *adapter)
struct e1000_ring *tx_ring = &adapter->test_tx_ring;
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
int i;
if (tx_ring->desc && tx_ring->buffer_info) {
for (i = 0; i < tx_ring->count; i++) {
- if (tx_ring->buffer_info[i].dma)
+ buffer_info = &tx_ring->buffer_info[i];
+
+ if (buffer_info->dma)
dma_unmap_single(&pdev->dev,
- tx_ring->buffer_info[i].dma,
- tx_ring->buffer_info[i].length,
- DMA_TO_DEVICE);
- if (tx_ring->buffer_info[i].skb)
- dev_kfree_skb(tx_ring->buffer_info[i].skb);
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
}
}
if (rx_ring->desc && rx_ring->buffer_info) {
for (i = 0; i < rx_ring->count; i++) {
- if (rx_ring->buffer_info[i].dma)
+ buffer_info = &rx_ring->buffer_info[i];
+
+ if (buffer_info->dma)
dma_unmap_single(&pdev->dev,
- rx_ring->buffer_info[i].dma,
- 2048, DMA_FROM_DEVICE);
- if (rx_ring->buffer_info[i].skb)
- dev_kfree_skb(rx_ring->buffer_info[i].skb);
+ buffer_info->dma,
+ 2048, DMA_FROM_DEVICE);
+ if (buffer_info->skb)
+ dev_kfree_skb(buffer_info->skb);
}
}
@@ -1138,8 +1141,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->count = E1000_DEFAULT_TXD;
tx_ring->buffer_info = kcalloc(tx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!tx_ring->buffer_info) {
ret_val = 1;
goto err_nomem;
@@ -1156,8 +1158,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- ew32(TDBAL(0), ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
- ew32(TDBAH(0), ((u64) tx_ring->dma >> 32));
+ ew32(TDBAL(0), ((u64)tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH(0), ((u64)tx_ring->dma >> 32));
ew32(TDLEN(0), tx_ring->count * sizeof(struct e1000_tx_desc));
ew32(TDH(0), 0);
ew32(TDT(0), 0);
@@ -1179,8 +1181,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
tx_ring->buffer_info[i].skb = skb;
tx_ring->buffer_info[i].length = skb->len;
tx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
+ dma_map_single(&pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
if (dma_mapping_error(&pdev->dev,
tx_ring->buffer_info[i].dma)) {
ret_val = 4;
@@ -1200,8 +1202,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rx_ring->count = E1000_DEFAULT_RXD;
rx_ring->buffer_info = kcalloc(rx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
+ sizeof(struct e1000_buffer), GFP_KERNEL);
if (!rx_ring->buffer_info) {
ret_val = 5;
goto err_nomem;
@@ -1220,16 +1221,16 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
rctl = er32(RCTL);
if (!(adapter->flags2 & FLAG2_NO_DISABLE_RX))
ew32(RCTL, rctl & ~E1000_RCTL_EN);
- ew32(RDBAL(0), ((u64) rx_ring->dma & 0xFFFFFFFF));
- ew32(RDBAH(0), ((u64) rx_ring->dma >> 32));
+ ew32(RDBAL(0), ((u64)rx_ring->dma & 0xFFFFFFFF));
+ ew32(RDBAH(0), ((u64)rx_ring->dma >> 32));
ew32(RDLEN(0), rx_ring->size);
ew32(RDH(0), 0);
ew32(RDT(0), 0);
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
- E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
- E1000_RCTL_SBP | E1000_RCTL_SECRC |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
ew32(RCTL, rctl);
for (i = 0; i < rx_ring->count; i++) {
@@ -1244,8 +1245,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
skb_reserve(skb, NET_IP_ALIGN);
rx_ring->buffer_info[i].skb = skb;
rx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, 2048,
- DMA_FROM_DEVICE);
+ dma_map_single(&pdev->dev, skb->data, 2048,
+ DMA_FROM_DEVICE);
if (dma_mapping_error(&pdev->dev,
rx_ring->buffer_info[i].dma)) {
ret_val = 8;
@@ -1296,7 +1297,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl_reg);
e1e_flush();
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1322,7 +1323,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
/* Assert SW reset for above settings to take effect */
hw->phy.ops.commit(hw);
- mdelay(1);
+ usleep_range(1000, 2000);
/* Force Full Duplex */
e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
@@ -1363,7 +1364,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
/* force 1000, set loopback */
e1e_wphy(hw, MII_BMCR, 0x4140);
- mdelay(250);
+ msleep(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1395,7 +1396,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
- udelay(500);
+ usleep_range(500, 1000);
return 0;
}
@@ -1431,8 +1432,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
/* special write to serdes control register to enable SerDes analog
* loopback
*/
-#define E1000_SERDES_LB_ON 0x410
- ew32(SCTL, E1000_SERDES_LB_ON);
+ ew32(SCTL, E1000_SCTL_ENABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
@@ -1526,8 +1526,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
case e1000_82572:
if (hw->phy.media_type == e1000_media_type_fiber ||
hw->phy.media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
- ew32(SCTL, E1000_SERDES_LB_OFF);
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
e1e_flush();
usleep_range(10000, 20000);
break;
@@ -1564,7 +1563,7 @@ static int e1000_check_lbtest_frame(struct sk_buff *skb,
frame_size &= ~1;
if (*(skb->data + 3) == 0xFF)
if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF))
+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
return 0;
return 13;
}
@@ -1575,6 +1574,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
struct e1000_ring *rx_ring = &adapter->test_rx_ring;
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
int i, j, k, l;
int lc;
int good_cnt;
@@ -1595,14 +1595,17 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
k = 0;
l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
- 1024);
+ /* loop count loop */
+ for (j = 0; j <= lc; j++) {
+ /* send the packets */
+ for (i = 0; i < 64; i++) {
+ buffer_info = &tx_ring->buffer_info[k];
+
+ e1000_create_lbtest_frame(buffer_info->skb, 1024);
dma_sync_single_for_device(&pdev->dev,
- tx_ring->buffer_info[k].dma,
- tx_ring->buffer_info[k].length,
- DMA_TO_DEVICE);
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
k++;
if (k == tx_ring->count)
k = 0;
@@ -1612,13 +1615,16 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
msleep(200);
time = jiffies; /* set the start time for the receive */
good_cnt = 0;
- do { /* receive the sent packets */
+ /* receive the sent packets */
+ do {
+ buffer_info = &rx_ring->buffer_info[l];
+
dma_sync_single_for_cpu(&pdev->dev,
- rx_ring->buffer_info[l].dma, 2048,
- DMA_FROM_DEVICE);
+ buffer_info->dma, 2048,
+ DMA_FROM_DEVICE);
- ret_val = e1000_check_lbtest_frame(
- rx_ring->buffer_info[l].skb, 1024);
+ ret_val = e1000_check_lbtest_frame(buffer_info->skb,
+ 1024);
if (!ret_val)
good_cnt++;
l++;
@@ -1637,7 +1643,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ret_val = 14; /* error code for time out error */
break;
}
- } /* end loop count loop */
+ }
return ret_val;
}
@@ -1696,7 +1702,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
/* On some Phy/switch combinations, link establishment
* can take a few seconds more than expected.
*/
- msleep(5000);
+ msleep_interruptible(5000);
if (!(er32(STATUS) & E1000_STATUS_LU))
*data = 1;
@@ -1980,12 +1986,12 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
switch (e1000_gstrings_stats[i].type) {
case NETDEV_STATS:
- p = (char *) &net_stats +
- e1000_gstrings_stats[i].stat_offset;
+ p = (char *)&net_stats +
+ e1000_gstrings_stats[i].stat_offset;
break;
case E1000_STATS:
- p = (char *) adapter +
- e1000_gstrings_stats[i].stat_offset;
+ p = (char *)adapter +
+ e1000_gstrings_stats[i].stat_offset;
break;
default:
data[i] = 0;
@@ -1993,7 +1999,7 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
}
data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
}
}
@@ -2069,23 +2075,20 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
- u32 status, ret_val;
+ u16 cap_addr, lpa_addr, pcs_stat_addr, phy_data;
+ u32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
+ if (!(adapter->flags2 & FLAG2_HAS_EEE))
return -EOPNOTSUPP;
switch (hw->phy.type) {
case e1000_phy_82579:
cap_addr = I82579_EEE_CAPABILITY;
- adv_addr = I82579_EEE_ADVERTISEMENT;
lpa_addr = I82579_EEE_LP_ABILITY;
pcs_stat_addr = I82579_EEE_PCS_STATUS;
break;
case e1000_phy_i217:
cap_addr = I217_EEE_CAPABILITY;
- adv_addr = I217_EEE_ADVERTISEMENT;
lpa_addr = I217_EEE_LP_ABILITY;
pcs_stat_addr = I217_EEE_PCS_STATUS;
break;
@@ -2104,10 +2107,7 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
/* EEE Advertised */
- ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
- if (ret_val)
- goto release;
- edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+ edata->advertised = mmd_eee_adv_to_ethtool_adv_t(adapter->eee_advert);
/* EEE Link Partner Advertised */
ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
@@ -2125,25 +2125,11 @@ release:
if (ret_val)
return -ENODATA;
- e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
- status = er32(STATUS);
-
/* Result of the EEE auto negotiation - there is no register that
* has the status of the EEE negotiation so do a best-guess based
- * on whether both Tx and Rx LPI indications have been received or
- * base it on the link speed, the EEE advertised speeds on both ends
- * and the speeds on which EEE is enabled locally.
+ * on whether Tx or Rx LPI indications have been received.
*/
- if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
- (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
- ((status & E1000_STATUS_SPEED_100) &&
- (edata->advertised & ADVERTISED_100baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
- ((status & E1000_STATUS_SPEED_1000) &&
- (edata->advertised & ADVERTISED_1000baseT_Full) &&
- (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
- (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+ if (phy_data & (E1000_EEE_TX_LPI_RCVD | E1000_EEE_RX_LPI_RCVD))
edata->eee_active = true;
edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
@@ -2160,19 +2146,10 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
struct ethtool_eee eee_curr;
s32 ret_val;
- if (!(adapter->flags & FLAG_IS_ICH) ||
- !(adapter->flags2 & FLAG2_HAS_EEE))
- return -EOPNOTSUPP;
-
ret_val = e1000e_get_eee(netdev, &eee_curr);
if (ret_val)
return ret_val;
- if (eee_curr.advertised != edata->advertised) {
- e_err("Setting EEE advertisement is not supported\n");
- return -EINVAL;
- }
-
if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
e_err("Setting EEE tx-lpi is not supported\n");
return -EINVAL;
@@ -2183,16 +2160,21 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
return -EINVAL;
}
- if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
- hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
-
- /* reset the link */
- if (netif_running(netdev))
- e1000e_reinit_locked(adapter);
- else
- e1000e_reset(adapter);
+ if (edata->advertised & ~(ADVERTISE_100_FULL | ADVERTISE_1000_FULL)) {
+ e_err("EEE advertisement supports only 100TX and/or 1000T full-duplex\n");
+ return -EINVAL;
}
+ adapter->eee_advert = ethtool_adv_to_mmd_eee_adv_t(edata->advertised);
+
+ hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+ /* reset the link */
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 08:00:00 +0000