diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igb/e1000_mac.c')
-rw-r--r-- | drivers/net/ethernet/intel/igb/e1000_mac.c | 119 |
1 files changed, 115 insertions, 4 deletions
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 97f6fae48d1d..07cf4fe58338 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -141,21 +141,69 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) } /** + * igb_find_vlvf_slot - find the VLAN id or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vlvf_bypass: skip VLVF if no match is found + * + * return the VLVF index where this VLAN id should be placed + * + **/ +static s32 igb_find_vlvf_slot(struct e1000_hw *hw, u32 vlan, bool vlvf_bypass) +{ + s32 regindex, first_empty_slot; + u32 bits; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* if vlvf_bypass is set we don't want to use an empty slot, we + * will simply bypass the VLVF if there are no entries present in the + * VLVF that contain our VLAN + */ + first_empty_slot = vlvf_bypass ? -E1000_ERR_NO_SPACE : 0; + + /* Search for the VLAN id in the VLVF entries. Save off the first empty + * slot found along the way. + * + * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1 + */ + for (regindex = E1000_VLVF_ARRAY_SIZE; --regindex > 0;) { + bits = rd32(E1000_VLVF(regindex)) & E1000_VLVF_VLANID_MASK; + if (bits == vlan) + return regindex; + if (!first_empty_slot && !bits) + first_empty_slot = regindex; + } + + return first_empty_slot ? : -E1000_ERR_NO_SPACE; +} + +/** * igb_vfta_set - enable or disable vlan in VLAN filter table * @hw: pointer to the HW structure * @vlan: VLAN id to add or remove + * @vind: VMDq output index that maps queue to VLAN id * @vlan_on: if true add filter, if false remove * * Sets or clears a bit in the VLAN filter table array based on VLAN id * and if we are adding or removing the filter **/ -s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, bool vlan_on) +s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, u32 vind, + bool vlan_on, bool vlvf_bypass) { struct igb_adapter *adapter = hw->back; - u32 regidx, vfta_delta, vfta; + u32 regidx, vfta_delta, vfta, bits; + s32 vlvf_index; - if (vlan > 4095) - return E1000_ERR_PARAM; + if ((vlan > 4095) || (vind > 7)) + return -E1000_ERR_PARAM; + + /* this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if VT Mode is set + * We don't write the VFTA until we know the VLVF part succeeded. + */ /* Part 1 * The VFTA is a bitstring made up of 128 32-bit registers @@ -174,6 +222,69 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vlan, bool vlan_on) vfta_delta &= vlan_on ? ~vfta : vfta; vfta ^= vfta_delta; + /* Part 2 + * If VT Mode is set + * Either vlan_on + * make sure the VLAN is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + if (!adapter->vfs_allocated_count) + goto vfta_update; + + vlvf_index = igb_find_vlvf_slot(hw, vlan, vlvf_bypass); + if (vlvf_index < 0) { + if (vlvf_bypass) + goto vfta_update; + return vlvf_index; + } + + bits = rd32(E1000_VLVF(vlvf_index)); + + /* set the pool bit */ + bits |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vind); + if (vlan_on) + goto vlvf_update; + + /* clear the pool bit */ + bits ^= 1 << (E1000_VLVF_POOLSEL_SHIFT + vind); + + if (!(bits & E1000_VLVF_POOLSEL_MASK)) { + /* Clear VFTA first, then disable VLVF. Otherwise + * we run the risk of stray packets leaking into + * the PF via the default pool + */ + if (vfta_delta) + hw->mac.ops.write_vfta(hw, regidx, vfta); + + /* disable VLVF and clear remaining bit from pool */ + wr32(E1000_VLVF(vlvf_index), 0); + + return 0; + } + + /* If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + vfta_delta = 0; + +vlvf_update: + /* record pool change and enable VLAN ID if not already enabled */ + wr32(E1000_VLVF(vlvf_index), bits | vlan | E1000_VLVF_VLANID_ENABLE); + +vfta_update: /* bit was set/cleared before we started */ if (vfta_delta) hw->mac.ops.write_vfta(hw, regidx, vfta); |