summaryrefslogtreecommitdiff
path: root/drivers/net/phy/bcm7xxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/bcm7xxx.c')
-rw-r--r--drivers/net/phy/bcm7xxx.c151
1 files changed, 93 insertions, 58 deletions
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 1d211d369039..974ec4515269 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -39,45 +39,15 @@
#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0)
#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1)
+#define AFE_RXCONFIG_2 MISC_ADDR(0x38, 2)
#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3)
#define AFE_TX_CONFIG MISC_ADDR(0x39, 0)
+#define AFE_VDCA_ICTRL_0 MISC_ADDR(0x39, 1)
+#define AFE_VDAC_OTHERS_0 MISC_ADDR(0x39, 3)
#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0)
#define CORE_EXPB0 0xb0
-static int bcm7445_config_init(struct phy_device *phydev)
-{
- int ret;
- const struct bcm7445_regs {
- int reg;
- u16 value;
- } bcm7445_regs_cfg[] = {
- /* increases ADC latency by 24ns */
- { MII_BCM54XX_EXP_SEL, 0x0038 },
- { MII_BCM54XX_EXP_DATA, 0xAB95 },
- /* increases internal 1V LDO voltage by 5% */
- { MII_BCM54XX_EXP_SEL, 0x2038 },
- { MII_BCM54XX_EXP_DATA, 0xBB22 },
- /* reduce RX low pass filter corner frequency */
- { MII_BCM54XX_EXP_SEL, 0x6038 },
- { MII_BCM54XX_EXP_DATA, 0xFFC5 },
- /* reduce RX high pass filter corner frequency */
- { MII_BCM54XX_EXP_SEL, 0x003a },
- { MII_BCM54XX_EXP_DATA, 0x2002 },
- };
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(bcm7445_regs_cfg); i++) {
- ret = phy_write(phydev,
- bcm7445_regs_cfg[i].reg,
- bcm7445_regs_cfg[i].value);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
static void phy_write_exp(struct phy_device *phydev,
u16 reg, u16 value)
{
@@ -102,7 +72,16 @@ static void phy_write_misc(struct phy_device *phydev,
phy_write(phydev, MII_BCM54XX_EXP_DATA, value);
}
-static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
+static void r_rc_cal_reset(struct phy_device *phydev)
+{
+ /* Reset R_CAL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0010);
+
+ /* Disable Reset R_AL/RC_CAL Engine */
+ phy_write_exp(phydev, 0x00b0, 0x0000);
+}
+
+static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
{
/* Increase VCO range to prevent unlocking problem of PLL at low
* temp
@@ -123,11 +102,7 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
/* Switch to CORE_BASE1E */
phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
- /* Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, CORE_EXPB0, 0x0010);
-
- /* Disable Reset R_CAL/RC_CAL Engine */
- phy_write_exp(phydev, CORE_EXPB0, 0x0000);
+ r_rc_cal_reset(phydev);
/* write AFE_RXCONFIG_0 */
phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19);
@@ -147,6 +122,71 @@ static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev)
return 0;
}
+static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_0 */
+ phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15);
+
+ /* AFE_RXCONFIG_1 */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */
+ phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003);
+
+ /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */
+ phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0);
+
+ /* AFE_TX_CONFIG, set 1000BT Cfeed=110 for all ports */
+ phy_write_misc(phydev, AFE_TX_CONFIG, 0x0061);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */
+ phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
+static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
+{
+ /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */
+ phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f);
+
+ /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */
+ phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da);
+
+ /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal
+ * offset for HT=0 code
+ */
+ phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
+
+ /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
+ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+
+ /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
+ phy_write_misc(phydev, DSP_TAP10, 0x011b);
+
+ /* Reset R_CAL/RC_CAL engine */
+ r_rc_cal_reset(phydev);
+
+ return 0;
+}
+
static int bcm7xxx_apd_enable(struct phy_device *phydev)
{
int val;
@@ -200,15 +240,23 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags);
int ret = 0;
- dev_info(&phydev->dev, "PHY revision: 0x%02x, patch: %d\n", rev, patch);
+ pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n",
+ dev_name(&phydev->dev), phydev->drv->name, rev, patch);
switch (rev) {
- case 0xa0:
case 0xb0:
- ret = bcm7445_config_init(phydev);
+ ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
+ break;
+ case 0xd0:
+ ret = bcm7xxx_28nm_d0_afe_config_init(phydev);
+ break;
+ case 0xe0:
+ case 0xf0:
+ /* Rev G0 introduces a roll over */
+ case 0x10:
+ ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev);
break;
default:
- ret = bcm7xxx_28nm_afe_config_init(phydev);
break;
}
@@ -336,7 +384,7 @@ static int bcm7xxx_dummy_config_init(struct phy_device *phydev)
.features = PHY_GBIT_FEATURES | \
SUPPORTED_Pause | SUPPORTED_Asym_Pause, \
.flags = PHY_IS_INTERNAL, \
- .config_init = bcm7xxx_28nm_afe_config_init, \
+ .config_init = bcm7xxx_28nm_config_init, \
.config_aneg = genphy_config_aneg, \
.read_status = genphy_read_status, \
.resume = bcm7xxx_28nm_resume, \
@@ -416,20 +464,7 @@ static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = {
{ }
};
-static int __init bcm7xxx_phy_init(void)
-{
- return phy_drivers_register(bcm7xxx_driver,
- ARRAY_SIZE(bcm7xxx_driver));
-}
-
-static void __exit bcm7xxx_phy_exit(void)
-{
- phy_drivers_unregister(bcm7xxx_driver,
- ARRAY_SIZE(bcm7xxx_driver));
-}
-
-module_init(bcm7xxx_phy_init);
-module_exit(bcm7xxx_phy_exit);
+module_phy_driver(bcm7xxx_driver);
MODULE_DEVICE_TABLE(mdio, bcm7xxx_tbl);