summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-fw-file.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-fw-file.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-fw-file.h308
1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index 401f7be36b93..f2a047f6bb3e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -131,6 +131,9 @@ enum iwl_ucode_tlv_type {
IWL_UCODE_TLV_API_CHANGES_SET = 29,
IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
+ IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
+ IWL_UCODE_TLV_FW_DBG_DEST = 38,
+ IWL_UCODE_TLV_FW_DBG_CONF = 39,
};
struct iwl_ucode_tlv {
@@ -179,4 +182,309 @@ struct iwl_ucode_capa {
__le32 api_capa;
} __packed;
+/**
+ * enum iwl_ucode_tlv_flag - ucode API flags
+ * @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
+ * was a separate TLV but moved here to save space.
+ * @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behaviour on hidden SSID,
+ * treats good CRC threshold as a boolean
+ * @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
+ * @IWL_UCODE_TLV_FLAGS_P2P: This uCode image supports P2P.
+ * @IWL_UCODE_TLV_FLAGS_DW_BC_TABLE: The SCD byte count table is in DWORDS
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
+ * @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
+ * offload profile config command.
+ * @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
+ * (rather than two) IPv6 addresses
+ * @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
+ * from the probe request template.
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
+ * @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
+ * @IWL_UCODE_TLV_FLAGS_P2P_PM: P2P client supports PM as a stand alone MAC
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_DCM: support power save on BSS station and
+ * P2P client interfaces simultaneously if they are in different bindings.
+ * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and
+ * P2P client interfaces simultaneously if they are in same bindings.
+ * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
+ * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
+ * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
+ * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients
+ * @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
+ */
+enum iwl_ucode_tlv_flag {
+ IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
+ IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
+ IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
+ IWL_UCODE_TLV_FLAGS_P2P = BIT(3),
+ IWL_UCODE_TLV_FLAGS_DW_BC_TABLE = BIT(4),
+ IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
+ IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
+ IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
+ IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
+ IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
+ IWL_UCODE_TLV_FLAGS_P2P_PM = BIT(21),
+ IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_DCM = BIT(22),
+ IWL_UCODE_TLV_FLAGS_BSS_P2P_PS_SCM = BIT(23),
+ IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
+ IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
+ IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
+ IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
+ IWL_UCODE_TLV_FLAGS_GO_UAPSD = BIT(30),
+};
+
+/**
+ * enum iwl_ucode_tlv_api - ucode api
+ * @IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID: wowlan config includes tid field.
+ * @IWL_UCODE_TLV_CAPA_EXTENDED_BEACON: Support Extended beacon notification
+ * @IWL_UCODE_TLV_API_BT_COEX_SPLIT: new API for BT Coex
+ * @IWL_UCODE_TLV_API_CSA_FLOW: ucode can do unbind-bind flow for CSA.
+ * @IWL_UCODE_TLV_API_DISABLE_STA_TX: ucode supports tx_disable bit.
+ * @IWL_UCODE_TLV_API_LMAC_SCAN: This ucode uses LMAC unified scan API.
+ * @IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF: ucode supports disabling dummy notif.
+ * @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
+ * longer than the passive one, which is essential for fragmented scan.
+ */
+enum iwl_ucode_tlv_api {
+ IWL_UCODE_TLV_API_WOWLAN_CONFIG_TID = BIT(0),
+ IWL_UCODE_TLV_CAPA_EXTENDED_BEACON = BIT(1),
+ IWL_UCODE_TLV_API_BT_COEX_SPLIT = BIT(3),
+ IWL_UCODE_TLV_API_CSA_FLOW = BIT(4),
+ IWL_UCODE_TLV_API_DISABLE_STA_TX = BIT(5),
+ IWL_UCODE_TLV_API_LMAC_SCAN = BIT(6),
+ IWL_UCODE_TLV_API_SF_NO_DUMMY_NOTIF = BIT(7),
+ IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8),
+};
+
+/**
+ * enum iwl_ucode_tlv_capa - ucode capabilities
+ * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
+ * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
+ * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
+ * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
+ * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
+ * tx power value into TPC Report action frame and Link Measurement Report
+ * action frame
+ * @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
+ * channel in DS parameter set element in probe requests.
+ * @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
+ * probe requests.
+ * @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
+ * @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
+ * which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
+ */
+enum iwl_ucode_tlv_capa {
+ IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
+ IWL_UCODE_TLV_CAPA_LAR_SUPPORT = BIT(1),
+ IWL_UCODE_TLV_CAPA_UMAC_SCAN = BIT(2),
+ IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = BIT(6),
+ IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = BIT(8),
+ IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = BIT(9),
+ IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
+ IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
+ IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
+ IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = BIT(13),
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
+};
+
+/* The default calibrate table size if not specified by firmware file */
+#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
+#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
+#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
+
+/* The default max probe length if not specified by the firmware file */
+#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
+
+/*
+ * For 16.0 uCode and above, there is no differentiation between sections,
+ * just an offset to the HW address.
+ */
+#define IWL_UCODE_SECTION_MAX 12
+#define IWL_API_ARRAY_SIZE 1
+#define IWL_CAPABILITIES_ARRAY_SIZE 1
+#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
+
+/*
+ * Calibration control struct.
+ * Sent as part of the phy configuration command.
+ * @flow_trigger: bitmap for which calibrations to perform according to
+ * flow triggers.
+ * @event_trigger: bitmap for which calibrations to perform according to
+ * event triggers.
+ */
+struct iwl_tlv_calib_ctrl {
+ __le32 flow_trigger;
+ __le32 event_trigger;
+} __packed;
+
+enum iwl_fw_phy_cfg {
+ FW_PHY_CFG_RADIO_TYPE_POS = 0,
+ FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
+ FW_PHY_CFG_RADIO_STEP_POS = 2,
+ FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
+ FW_PHY_CFG_RADIO_DASH_POS = 4,
+ FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
+ FW_PHY_CFG_TX_CHAIN_POS = 16,
+ FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
+ FW_PHY_CFG_RX_CHAIN_POS = 20,
+ FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
+};
+
+#define IWL_UCODE_MAX_CS 1
+
+/**
+ * struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
+ * @cipher: a cipher suite selector
+ * @flags: cipher scheme flags (currently reserved for a future use)
+ * @hdr_len: a size of MPDU security header
+ * @pn_len: a size of PN
+ * @pn_off: an offset of pn from the beginning of the security header
+ * @key_idx_off: an offset of key index byte in the security header
+ * @key_idx_mask: a bit mask of key_idx bits
+ * @key_idx_shift: bit shift needed to get key_idx
+ * @mic_len: mic length in bytes
+ * @hw_cipher: a HW cipher index used in host commands
+ */
+struct iwl_fw_cipher_scheme {
+ __le32 cipher;
+ u8 flags;
+ u8 hdr_len;
+ u8 pn_len;
+ u8 pn_off;
+ u8 key_idx_off;
+ u8 key_idx_mask;
+ u8 key_idx_shift;
+ u8 mic_len;
+ u8 hw_cipher;
+} __packed;
+
+enum iwl_fw_dbg_reg_operator {
+ CSR_ASSIGN,
+ CSR_SETBIT,
+ CSR_CLEARBIT,
+
+ PRPH_ASSIGN,
+ PRPH_SETBIT,
+ PRPH_CLEARBIT,
+};
+
+/**
+ * struct iwl_fw_dbg_reg_op - an operation on a register
+ *
+ * @op: %enum iwl_fw_dbg_reg_operator
+ * @addr: offset of the register
+ * @val: value
+ */
+struct iwl_fw_dbg_reg_op {
+ u8 op;
+ u8 reserved[3];
+ __le32 addr;
+ __le32 val;
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_monitor_mode - available monitor recording modes
+ *
+ * @SMEM_MODE: monitor stores the data in SMEM
+ * @EXTERNAL_MODE: monitor stores the data in allocated DRAM
+ * @MARBH_MODE: monitor stores the data in MARBH buffer
+ */
+enum iwl_fw_dbg_monitor_mode {
+ SMEM_MODE = 0,
+ EXTERNAL_MODE = 1,
+ MARBH_MODE = 2,
+};
+
+/**
+ * struct iwl_fw_dbg_dest_tlv - configures the destination of the debug data
+ *
+ * @version: version of the TLV - currently 0
+ * @monitor_mode: %enum iwl_fw_dbg_monitor_mode
+ * @base_reg: addr of the base addr register (PRPH)
+ * @end_reg: addr of the end addr register (PRPH)
+ * @write_ptr_reg: the addr of the reg of the write pointer
+ * @wrap_count: the addr of the reg of the wrap_count
+ * @base_shift: shift right of the base addr reg
+ * @end_shift: shift right of the end addr reg
+ * @reg_ops: array of registers operations
+ *
+ * This parses IWL_UCODE_TLV_FW_DBG_DEST
+ */
+struct iwl_fw_dbg_dest_tlv {
+ u8 version;
+ u8 monitor_mode;
+ u8 reserved[2];
+ __le32 base_reg;
+ __le32 end_reg;
+ __le32 write_ptr_reg;
+ __le32 wrap_count;
+ u8 base_shift;
+ u8 end_shift;
+ struct iwl_fw_dbg_reg_op reg_ops[0];
+} __packed;
+
+struct iwl_fw_dbg_conf_hcmd {
+ u8 id;
+ u8 reserved;
+ __le16 len;
+ u8 data[0];
+} __packed;
+
+/**
+ * struct iwl_fw_dbg_trigger - a TLV that describes a debug configuration
+ *
+ * @enabled: is this trigger enabled
+ * @reserved:
+ * @len: length, in bytes, of the %trigger field
+ * @trigger: pointer to a trigger struct
+ */
+struct iwl_fw_dbg_trigger {
+ u8 enabled;
+ u8 reserved;
+ u8 len;
+ u8 trigger[0];
+} __packed;
+
+/**
+ * enum iwl_fw_dbg_conf - configurations available
+ *
+ * @FW_DBG_CUSTOM: take this configuration from alive
+ * Note that the trigger is NO-OP for this configuration
+ */
+enum iwl_fw_dbg_conf {
+ FW_DBG_CUSTOM = 0,
+
+ /* must be last */
+ FW_DBG_MAX,
+ FW_DBG_INVALID = 0xff,
+};
+
+/**
+ * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration
+ *
+ * @id: %enum iwl_fw_dbg_conf
+ * @usniffer: should the uSniffer image be used
+ * @num_of_hcmds: how many HCMDs to send are present here
+ * @hcmd: a variable length host command to be sent to apply the configuration.
+ * If there is more than one HCMD to send, they will appear one after the
+ * other and be sent in the order that they appear in.
+ * This parses IWL_UCODE_TLV_FW_DBG_CONF
+ */
+struct iwl_fw_dbg_conf_tlv {
+ u8 id;
+ u8 usniffer;
+ u8 reserved;
+ u8 num_of_hcmds;
+ struct iwl_fw_dbg_conf_hcmd hcmd;
+
+ /* struct iwl_fw_dbg_trigger sits after all variable length hcmds */
+} __packed;
+
#endif /* __iwl_fw_file_h__ */