diff options
Diffstat (limited to 'drivers/scsi/ufs/Kconfig')
| -rw-r--r-- | drivers/scsi/ufs/Kconfig | 187 |
1 files changed, 0 insertions, 187 deletions
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig deleted file mode 100644 index 393b9a01da36..000000000000 --- a/drivers/scsi/ufs/Kconfig +++ /dev/null @@ -1,187 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Kernel configuration file for the UFS Host Controller -# -# Copyright (C) 2011-2013 Samsung India Software Operations -# -# Authors: -# Santosh Yaraganavi <santosh.sy@samsung.com> -# Vinayak Holikatti <h.vinayak@samsung.com> - -config SCSI_UFSHCD - tristate "Universal Flash Storage Controller Driver Core" - depends on SCSI && SCSI_DMA - select PM_DEVFREQ - select DEVFREQ_GOV_SIMPLE_ONDEMAND - select NLS - help - This selects the support for UFS devices in Linux, say Y and make - sure that you know the name of your UFS host adapter (the card - inside your computer that "speaks" the UFS protocol, also - called UFS Host Controller), because you will be asked for it. - The module will be called ufshcd. - - To compile this driver as a module, choose M here and read - <file:Documentation/scsi/ufs.rst>. - However, do not compile this as a module if your root file system - (the one containing the directory /) is located on a UFS device. - -if SCSI_UFSHCD - -config SCSI_UFSHCD_PCI - tristate "PCI bus based UFS Controller support" - depends on PCI - help - This selects the PCI UFS Host Controller Interface. Select this if - you have UFS Host Controller with PCI Interface. - - If you have a controller with this interface, say Y or M here. - - If unsure, say N. - -config SCSI_UFS_DWC_TC_PCI - tristate "DesignWare pci support using a G210 Test Chip" - depends on SCSI_UFSHCD_PCI - help - Synopsys Test Chip is a PHY for prototyping purposes. - - If unsure, say N. - -config SCSI_UFSHCD_PLATFORM - tristate "Platform bus based UFS Controller support" - depends on HAS_IOMEM - help - This selects the UFS host controller support. Select this if - you have an UFS controller on Platform bus. - - If you have a controller with this interface, say Y or M here. - - If unsure, say N. - -config SCSI_UFS_CDNS_PLATFORM - tristate "Cadence UFS Controller platform driver" - depends on SCSI_UFSHCD_PLATFORM - help - This selects the Cadence-specific additions to UFSHCD platform driver. - - If unsure, say N. - -config SCSI_UFS_DWC_TC_PLATFORM - tristate "DesignWare platform support using a G210 Test Chip" - depends on SCSI_UFSHCD_PLATFORM - help - Synopsys Test Chip is a PHY for prototyping purposes. - - If unsure, say N. - -config SCSI_UFS_QCOM - tristate "QCOM specific hooks to UFS controller platform driver" - depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM - select QCOM_SCM if SCSI_UFS_CRYPTO - select RESET_CONTROLLER - help - This selects the QCOM specific additions to UFSHCD platform driver. - UFS host on QCOM needs some vendor specific configuration before - accessing the hardware which includes PHY configuration and vendor - specific registers. - - Select this if you have UFS controller on QCOM chipset. - If unsure, say N. - -config SCSI_UFS_MEDIATEK - tristate "Mediatek specific hooks to UFS controller platform driver" - depends on SCSI_UFSHCD_PLATFORM && ARCH_MEDIATEK - select PHY_MTK_UFS - select RESET_TI_SYSCON - help - This selects the Mediatek specific additions to UFSHCD platform driver. - UFS host on Mediatek needs some vendor specific configuration before - accessing the hardware which includes PHY configuration and vendor - specific registers. - - Select this if you have UFS controller on Mediatek chipset. - - If unsure, say N. - -config SCSI_UFS_HISI - tristate "Hisilicon specific hooks to UFS controller platform driver" - depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM - help - This selects the Hisilicon specific additions to UFSHCD platform driver. - - Select this if you have UFS controller on Hisilicon chipset. - If unsure, say N. - -config SCSI_UFS_TI_J721E - tristate "TI glue layer for Cadence UFS Controller" - depends on OF && HAS_IOMEM && (ARCH_K3 || COMPILE_TEST) - help - This selects driver for TI glue layer for Cadence UFS Host - Controller IP. - - Selects this if you have TI platform with UFS controller. - If unsure, say N. - -config SCSI_UFS_BSG - bool "Universal Flash Storage BSG device node" - select BLK_DEV_BSGLIB - help - Universal Flash Storage (UFS) is SCSI transport specification for - accessing flash storage on digital cameras, mobile phones and - consumer electronic devices. - A UFS controller communicates with a UFS device by exchanging - UFS Protocol Information Units (UPIUs). - UPIUs can not only be used as a transport layer for the SCSI protocol - but are also used by the UFS native command set. - This transport driver supports exchanging UFS protocol information units - with a UFS device. See also the ufshcd driver, which is a SCSI driver - that supports UFS devices. - - Select this if you need a bsg device node for your UFS controller. - If unsure, say N. - -config SCSI_UFS_EXYNOS - tristate "Exynos specific hooks to UFS controller platform driver" - depends on SCSI_UFSHCD_PLATFORM && (ARCH_EXYNOS || COMPILE_TEST) - help - This selects the Samsung Exynos SoC specific additions to UFSHCD - platform driver. UFS host on Samsung Exynos SoC includes HCI and - UNIPRO layer, and associates with UFS-PHY driver. - - Select this if you have UFS host controller on Samsung Exynos SoC. - If unsure, say N. - -config SCSI_UFS_CRYPTO - bool "UFS Crypto Engine Support" - depends on BLK_INLINE_ENCRYPTION - help - Enable Crypto Engine Support in UFS. - Enabling this makes it possible for the kernel to use the crypto - capabilities of the UFS device (if present) to perform crypto - operations on data being transferred to/from the device. - -config SCSI_UFS_HPB - bool "Support UFS Host Performance Booster" - help - The UFS HPB feature improves random read performance. It caches - L2P (logical to physical) map of UFS to host DRAM. The driver uses HPB - read command by piggybacking physical page number for bypassing FTL (flash - translation layer)'s L2P address translation. - -config SCSI_UFS_FAULT_INJECTION - bool "UFS Fault Injection Support" - depends on FAULT_INJECTION - help - Enable fault injection support in the UFS driver. This makes it easier - to test the UFS error handler and abort handler. - -config SCSI_UFS_HWMON - bool "UFS Temperature Notification" - depends on SCSI_UFSHCD=HWMON || HWMON=y - help - This provides support for UFS hardware monitoring. If enabled, - a hardware monitoring device will be created for the UFS device. - - If unsure, say N. - -endif |